SmarTerm 320 Installation-Operating Instructions

Transcription

S@Simplex
SmarTerm” 320
1
Installation/Operating
Instructions
MUX2-21-013
(574-460)
Ed 10 93
TABLE OF CONTENTS
INTRODUCTION
.......................................................................................................................................................
1
.....................................................................................................................................
1
.................................................................................................................................
1
Universal Transponder
Setup ............................................................................................................................
13
Hardware Connection
Supplied Documentation
SmarTerm 320 INSTALLATION
.................................................................................................
.22
2120 Terminal Mode Setup ..............................................................................................................................
.23
2120 Terminal Mode Hardware Connection ......................................................................................................
31
SmarTerm 320 KEYBOARD MAPPING ...................................................................................................................
31
OPERATING THE SmarTerm 320 WITH A UNIVERSAL TRANSPONDER..
.32
.........................................................
OPERATING THE SmarTerm 320 WITH A 2120 .. .. . . . .. .. . . .. . .. . .. . .. . . .. .. . . .. . .. . . .. . .. . . .. .. . . .. . .. . . .. . . .. .. . . .. . .. . . .. .. . . .. . .. . . .. .. . . .. . .. .35
This publication provides a comprehensive guide to SmarTerm 320 software installation on an IBM-compatible
For more detailed installation instructions, refer to the SmarTerm 320 User Guide supplied with the software.
Note:
The illustrations provided may differ from actual screen information.
match illustrations only where noted.
Change actual screen information
Supplied Documentation
l
SmarTerm 320 Installation Guide
l
SmarTerm 320 Technical Reference
l
SmarTerm 320 User Guide
l
Registration
Guide
Packet
SmarTerm 320 INSTALLATION
Note:
For these instructions
consider Drive A as the floppy drive and Drive C as the hard drive.
1. Locate the software package containing the program diskettes.
2. Insert the diskette labeled SmarTerm
320 Installation
3. At the DOS prompt C : \>, type a : install
l
& Program
1 into the floppy drive.
then press Enter.
Figure 1 appears.
SmarTerm
This
program
automatically.
by pressing
Press
installs
You
Est.
any
key
320
can
now
Installation
Program
SmarTerm
320
quit
running
on your
PC
it at any time
to
program...
begin
Figure 1
1
the
PC.
to
.
4. Press any key.
l
Figure 2 appears. The information
displayed in Figure 2 is determined
The
for
following
list
your
information;
DOS
DOS
EMS
You
Your
Your
Version:
5.0
RAM installed
memory
is not
are running
on
video
card
is
monitor
is a
in bytes:
655360
present
an 80286
CPU
a Color
card
Color
Display
Press
to
any
key
by SmarTerm.
shows your
system
configuration.
you'll
get a chance
to confirm
It's
just
items
later.
continue...
Figure 2
5. Press any key.
l
Figure 3 appears.
Full
installation
Selective
installation
Select
Choose
"Full
Use "Selective
your
system
Move
the
bar
the
type
installation"
of
the
installation"
installation.
first
to
make
time
through.
changes
to
later.
cursor
to
the
item
Figure 3
2
you
want
and
press
ENTER.
5
6. In Figure 3, select Full Installation and press Enter.
l
Figure 4 appears.
On which
disk
drive
do you
want
to
install
SmarTerm
320?
Figure 4
1. In plgure
l
4,
cnoose Drive
c : as me locatIon tar smar term to be mstallea; tnen press tnter.
Figure 5 appears.
In
which
subdirectory
If the
subdirectory
will
create
it
for
do
doesn't
you.
Press
ENTER to accept
OR, press
ESC to erase
you
want
already
the subdirectory
the box,
and
Which
to
install
exist,
the
type
subdirectory?
\ST320
Figure 5
3
name
in
SmarTerm
320?
installation
in the box
a different
program
below.
name.
8. In Figure 5, press Enter to select the subdirectory
installed.
l
displayed.
This directory
Figure 6 appears.
l
l
l
l
Please
select
your keyboard
type.
The enhanced
keyboard
has 4 keys in the top row of the
numeric
keypad
AND also
has keys labeled
Fll
and F12.
The IBM AT keyboard
has 4 keys in the top row of the
numeric
keypad.
The IBM PC/XT keyboard
has 3 keys in the top row of
the numeric
keypad.
The DEC LK250 is manufactured
by Digital
and has a Digital
logo
on the underside
of the keyboard.
Figure 6
9. In Figure 6, select Enhanced
l
is where you want SmarTerm
as the keyboard type and press Enter.
Figure 7 appears.
Video
Please
Graphics
select
your
Array
graphic
Figure 7
4
Hi-Res
display
Adapter
driver.
‘.’
10. In Figure 7, select None as the graphic display driver and press Enter.
l
Figure 8 appears.
No 132-column
video
card
Ahead
EGA 2001
Ahead
EGA 2001+
Ahead
EGA Wizard
Deluxe
AST-3G
AST Preview
AT1 Graphics
Solution
AT1 EGA Wonder
AT1 VGA Wonder
Compaq VGA
Everex
Edge
Everex
Micro
Enhancer
Everex
Viewpoint
Do you have a card
that
provides
true
132-column
displays?
If so, please
select
your
132-column
hardware
driver.
Use arrow
keys,
PgUp,
PgDn for more choices.
Figure 8
11. In Figure 8, select No
132-column
video
card
and press Enter.
0 Figure 9 appears.
Serial
Communication
Only
Network
Communication
Only
Both
Serial
and Network
Communication
Please
select
If you choose
SmarTerm
320
both
will
the
type(s)
of
communication.
serial
and network
use more memory.
Figure 9
5
communication
.
12. In Figure 9, select Serial
l
Communications
Only
as the type of communication
and press Enter.
Figure 10 appears.
512
1024
2048
4096
8192
Please
select
the
size
bytes
bytes
bytes
bytes
bvtes
of
the
communications
buffer.
SmarTerm
uses this
buffer
to store
data
as it comes in over
the communication
line.
A larger
buffer
yields
faster
file
If you are interested
in saving
transfers,
but uses more memory.
memory,
choose
"512 bytes."
This
setting
should
be adequate
for
if you are more concerned
about
rapid
file
most users.
However,
choose
one of the larger
numbers.
transfers,
Figure 10
13. In Figure 10, select 512
l
bytes
as the communications
buffer and press Enter.
Figure 11 appears.
No printer
to be used
DEC LJ250/252
Companion
DEC LJ250/252
Companion
DEClaser
2000 Family
of
DEClaser
2000 Family
of
Epson FX Printer
Epson LQ Printer
IBM Color
Graphics
Printer
IBM Proprinter
IBM Proprinter
2390
HP LaserJet
(100 dpi)
HP LaserJet
(300 d i)
HP LaserJet
II
(10 5 dpi)
Color
Printer
Color
Printer
Printers
(100
Printers
(300
Please
select
your
first
printer.
Use arrow
keys,
PgUp, PgDn for
Figure 11
more
( 90 DPI)
(180 DPI)
DPI)
DPI)
choices.
14. In Figure 11, select No printer
l
to
be
used
and press Enter.
Figure 12 appears.
Do you run the VAX version
If so, you can select
the
for these
applications.
of WordPerfect,
special
keyboard
Lotus
drivers
l-2-3,
that
or dBASE?
you need
Figure 12
15. In Figure 12, select No for the VAX option and press Enter.
l
Figure 13 appears.
24
36
72
144
Please
select
the
lines
lines
lines
lines
of
of
of
of
maximum
text
text
text
text
number
of
lines
of
text.
SmarTerm
uses these
lines
to emulate
the "page
memory"
feature
of the VT320 terminal,
which
provides
backward
scrolling.
The more lines
you choose,
the more memory
SmarTerm
needs.
If
you are interested
in saving
memory,
choose
"24."
If you aren't
concerned
about
memory,
choose
one of the larger
numbers.
Figure 13
7
16. In Figure 13, select 24
l
lines
of
text
as the maximum number of lines of text and press Enter.
Figure 14 appears. This allows you to run SmarTerm in a multitasking
Do you want
operations)?
If
if
you
you
multitasking
choose
choose
(also
SmarTerm
"Yes"
to run without
known
as
needs
more
multitasking.
environment.
background
memory
than
it
does
Figure 14
17. In Figure 14, select No and press Enter.
l
Figure 15 appears.
Do you
want
some
If you choose
"Yes"
the program
will
use less
installed
on your machine
A check
memory
of your
installed.
SmarTerm
to
use
EMS Memory?
SmarTerm
features
will
run
DOS memory.
You MUST have
to use this
feature.
hardware
indicates
You should
select
Figure 15
a
faster
and
EMS memory
that
you do not have
"No"
for EMS memory
EMS
usage.
1
18. In Figure 15, select No for the option of using EMS Memory and press Enter.
l
Figure 16 appears.
Do you
need
non-English
language
features?
Figure 16
19. In Figure 16, select No for the option of non-English
l
language features and press Enter.
Figure 17 appears.
General
Utility
Programs
PDIP File
Transfer
Host
PDIP File
Transfer
Host
PDIP File
Transfer
Host
Do you want to install
or sample
host
programs?
"NO" to "yES"
and vice
Programs
Programs
Programs
any of
Press
versa.
Figure 17
9
(BASIC)
(C)
(FORTRAN)
NO
NO
NO
NO
SmarTerm
320’s
utility
the SPACE BAR to change
20. Since no SmarTerm 320 Utility programs are needed for this installation,
and press Enter.
l
select No in Figure 17 for all listings
Figure 18 appears.
II
NO! - Leave
it alone
YES - But create
AUTOEXEC.BAE
as
proposed
additions
YFS - By placing
Do you
want
to
update
your
backup
into
AUTOEXEC.NEW
AUTOEXEC.BAT
I/
file?
This
installation
program
can automatically
modify
your
AUTOEXEC.BAT
file
so that
you can run SmarTerm
from any
subdirectory.
These changes
won't
take
effect
until
the
next
time
you boot
your
computer.
Figure 18
21. In Figure 18, select the No ! -Leave
SmarTerm to update your autoexec
l
The
Figure 19 appears. It summarizes
it alone
. bat file.
option and press Enter. Selecting this option will not allow
the choices made during the installation.
following
summa rizes
your
selections.
Please
This
is a FULL INSTALLATION.
You have selected
to copy to C:\ST320
You are usin
an Enhanced
keyboard
SmarTerm
wil P use No Graphics
Capability
132 Column
Board
Driver:
NONE
Support
for
Serial
Communications:
YES
Network
Driver:
NONE
Printer
1 Support:
NONE
Printer
2 Support:
NONE
Memory
for 24 lines
will
be allocated
Memory
for Corn Buffer
Size of 512 bytes
Multitasking:
NO
EMS Memory
Use: NO
Press
any
key
to
continue...
Figure 19
10
the
review
will
be
list
allocated
carefully.
22. Press any key to continue.
Figure 20 appears.
l
Is
it
If the previous
‘yes"
to copy
If the list
installation
okay
to
list
the
proceed
with
copying
described
what
SmarTerm
Files
to
was incorrect,
and start
over
choose
again.
files?
you wanted,
your
disk.
"no"
to
cancel
choose
the
Figure 20
23. In Figure 20, select Yes to allow SmarTerm to copy files to your hard disk and press Enter.
l
Fig’ures 21 and 22 inform you that the files are being copied to your hard disk.
Installing
Files
- Please
Figure 21
11
Wait
. . .
Making:
ST320
Installing
Files
- Please
Wait
. ..
PRESS ANY KEY
Please
place
the distribution
disk
labeled
"Program
2" version:
2.0 in drive
A:
Press
any key to continue...
Figure 22
24. Follow the prompts to insert the SmarTerm 320 Program 2 diskette and allow the files to be copied to your
hard disk. Because you did not choose to install any of SmarTerm’s utility programs, you will not use the
SmarTerm 320 Program 3 & 4 diskettes for these instructions.
l
Figure 23 informs you that the file \ST320\ST320
File
\ST320\ST320.ENV
.ENV will be created on Drive
PRESS ANY KEY
will
be created
Figure 23
25. Press any key to continue.
0 Installation is complete.
12
on
drive
C.
C:
1
Universal
Transponder
Setup
The following steps will configure the SmarTerm 320 for use with the Universal Transponder
26. At the DOS prompt C: \> type
ST320 -c and press Enter.
l
cd
St320
and press Enter. At the DOS prompt C: \ST320>
Figure 24 appears.
Select
a configuration
1 - Net
1
Net
2 -Net
2
Net
3-
1200
Baud,
8/None
1200
4-
1200
Baud,
7/Even
1200
5-
2400
Baud,
8/None
2400
6-
2400
Baud,
7/Even
2400
7-
9600
Baud,
8/None
9600
8-
9600
Baud,
7/Even
9600
SmarTerm
320
Version
2.0a
(c)
Copyright
1992
by
Persoft,
+ indicates
=Keyboard
Speed
Connect
Usage
J
: Make
Alt-S
?,
4,
Home,
a connection
: Setup
up
End
: Move
Alt-X
or
: Exit
using
examine
bar
cursor
SmarTerm
Figure 24
27. In Figure 24, highlight or select Net
1.
13
highlighted
highlighted
to
highlight
and
return
configuration
configuration
a configuration
to
DOS
Inc.
type
.
28. Hold down the Alt
key and press S to setup or examine the highlighted configuration.
Figure 25 appears with My favorite
l
parameters
highlighted
Net
l
l
l
l
l
l
l
User
defined
-neyDoara
1
vT320
cOmmunications
parameters
PC S stem customization
soft E ey Definitions
File
transfer
parameters
DEC terminal
Emulation
parameters
copy
from Another
configuration
Quit
setup
exit
to DOS
l
or selected:
7 bits
menu.
usage
J:
Esc:
Alt-S:
Alt-X:
?, 1:
End:
KP +:
(Highlighted
Selects
option
Cancels
exit
Setup
SmarTerm
Home,
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
Figure 25
29. In Figure 25, press Enter to set up parameters.
Figure 26 appears.
l
Setup
Mode
Net
l
Te
l
0
l
= p'c
l
l
l
l
l
l
so
Primary
Terminal
phone
mode
Defines
current
number
vT320
configuration
1
7 bits
name.
Fi
DE
co
Quit
exit
G'ZS-
User
defined
-Keyboard
J:
T,
1:
t:
menu.
Usage
Completes
Moves cursor
Backspace
Ins:
Del:
Ctrl-End:
Ctrl-Home:
Insert
Delete
Delete
Delete
Figure 26
14
toggle
Esc:
char
Alt-S:
to endAlt-X:
KP +:
all
Prev
screen
exit
Setup
exit
SmarTerm
Add to My Fav
param
30. In Figure 26, press C to select Configuration
Figure 27 appears.
l
!
name.
Mode
rSetup
Net
Quit
exit
setup
to DOS
User
defined
l
l
I
,-Keyboard
1
menu.
I
Usage
J: Selects
option
Esc: Cancels
Alt-S:
exit
Setup
Alt-X:
SmarTerm
I
1‘, J: Moves cursor
up/down
Home, End: Moves cursor,
first/last
option
KP -: Removes
from My Favorite
Params
KP +: Grab and reposition
parameters
Figure 27
31. In Figure 27, type UNIVERSAL
l
User
rKeyboard
J:
T,
name and press Enter.
Figure 28 appears. In Figure 28, Net 1 has been replaced with the words UNIVERSAL
Selects
I
TRANSPONDER as the configuration
J:
t:
defined
the
terminal
your
IBM PC will
emulate.
I
menu.
Usage
Completes
Moves cursor
Backspace
TRANSPONDER.
Ins:
Del:
Ctrl-End:
Ctrl-Home:
Insert
Delete
Delete
Delete
Figure 28
15
toggle
Esc: Prev
screen
char
Alt-S:
exit
Setup
to endAlt-X:
exit
SmarTerm
KP +: Add to My Fav
all
param
32. In Figure 28, press T to select Terminal
mode.
Figure 29 appears.
l
Setup
Mode
UNIVERSAL
l
vt320
bvT320
l
vt220
l
vt220
l
vtlO0
l
Quit
l
l
8
7
8
7
bits
bits
bits
bits
vT320 7 bits
ill
emulate.
vt52
tty
DEC VT320 terminal
7 bit
control.
rKeyDoarci
TRANSPONDER
with
usage
J: Selects
option
Esc: Cancels
Alt-S:
exit
Setup
Alt-X:
SmarTerm
?, L: Moves cursor
up/down
End: Moves cursor,
first/last
option
KP +: Adds to My Favorite
Parameters
(Highlighted
letter
also
selects
option)
Home,
Figure 29
33. In Figure 29, Select vT320
Pr
Te
0
= p'c
l
l
l
l
l
l
l
l
l
I
and press Enter.
Figure 30 appears
l
l
7 bits
l
Configuration
Primary
phone
Terminal
mode
Selects
so
the
name
number
UNIVERSAL
vT320
terminal
your
IBM PC will
TRANSPONDER
7 bits
emulate.
Fi
DE
co
Quit-.,,,,
exit
to
User
-Keyboard
J:
T,
1:
t:
.--. -
-. --- -.
DOS
defined
menu.
Usage
Completes
Moves cursor
Backspace
Ins:
Del:
Ctrl-End:
Ctrl-Home:
Insert
Delete
Delete
Delete
Figure 30
16
toggle
Esc:
char
Alt-S:
to endAlt-X:
all
KP +:
Prev screen
exit
Setup
exit
SmarTerm
Add to My Fav
param
.
34. In Figure 30, press the Esc key.
Figure 31 appears.
l
Setup
Mode
l
My favorite
parameters
l
Configuration
name
l
Primary
phone
number
l
Terminal
mode
l
communications
parameters
l
l
soft %ey Definitions
l
File
transfer
parameters
l
DEC terminal
Emulation
parameters
l
copy from Another
configuration
II l Oult
SetuD
-------a
l
exit
to DOS
User
-Keyboard
defined
ul NIVERSAL
vT320
--- -----TRANSPONDER
7 bits
menu.
Usage
J: Selects
option
Esc: Cancels
Alt-S:
exit
Setup
Alt-X:
SmarTerm
?, &: Moves cursor
up/down
End: Moves cursor,
first/last
option
Parameters
(Highlighted
letter
also
selects
option)
Home,
Figure 31
35. In Figure 31, press Oto setup
l
communications
parameters.
Figure 32 appears.
l
l
l
l
l
l
l
l
Communicatioh
line
baud Rate
bits/character-Parity
stop
Bits
Disconnect
on exit
Online/local
Local
echo
Fine-tuning
parameters
Enables
-Keyboard
or
disables
Net 1
9600
f/ggE
Yes
Online
Disable
local
echo.
Usage
J:
Esc:
Alt-S:
Alt-X:
Selects
Option
Cancels
exit
Setup
SmarTerm
T, 1:
End:
KP +:
(Highlighted
Home,
Figure 32
17
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
36. Use arrow keys to select the parameter to be changed and press Enter. A list of selections will appear. Match
each selection to those in Figure 33. After each selection is made press Enter.
,-Keyboard
Usage
J:
Esc:
Alt-S:
Alt-X:
Selects
option
Cancels
exit
Setup
SmarTerm
T, 1: Moves
End:
KP +:
(Hiqhliqhted
Home,
cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
Figure 33
37. Once the final options are selected press the Esc key.
Figure 34 appears.
l
Setup
l
l
l
l
l
l
l
l
l
l
l
l
Mode
favorite
parameters
Configuration
name
Primary
phone
number
Terminal
mode
cOmmunications
parameters
soft f: ey Definitions
File
transfer
parameters
DEC terminal
Emulation
parameters
copy from Another
configuration
Quit
setup
exit
to DOS
My
User
-xeyboara
defined
vT320
TRANSPONDER
7 bits
I
menu.
usage
J:
Selects
Esc:
Alt-S:
Alt-X:
UNIVERSAL
option
Cancels
exit
Setup
SmarTerm
?, 1:
End:
KP +:
(Highlighted
Home,
Figure 34
18
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
i
38. In Figure 34, press Sto setup the PC System
customization.
Figure 35 appears.
l
rSetup
Mode
M favorite
~yg~oys
PC &stem
cust c!ii
. Printer
parameters
. Screen
customization
parameters
. Keyboard
customization
pa.rameters
. Persoft
extended
Command sequences
Defines
Quit
exit
l
l
the
settings
_--__-.-
setupto DOS
Defines
for
the
hardware
use
_-
All
with
your
printer.
._ .^^ -... -- .-
^^ _-_---.
-^."---..
configuration.
-Keyboard-Usage
J:
Esc:
Alt-S:
Alt-X:
?', 1:
End:
KP +:
(Highlighted
Selects
option
Cancels
exit
Setup
SmarTerm
Home,
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
Figure 35
S again to select Screen
39. In Figure35,press
l
customization
parameters.
Figure 36 appears.
Setup
Mode
l
M favorite
airzyteitcnr s
-PC &stem
cust Jk
l
Printer
parameters
creen
customization
parameters
l
Screen
type
l
auto
switch
to Graphics
l
auto
switch
to text
l
132 coluxnn
on text
screen
l
EGA/VGA display
support
l
set screen
coloR
Selects
emulation.
-Keyboard
text/graphics
Text
Never
Never
Horizontal
option
1:
screens
as
primary
scrolling
PC chars
display
for
Usage
J:
Esc:
Alt-S:
Alt-X:
Selects
option
Cancels
exit
Setup
SmarTerm
?, 4:
End:
KP +:
(Highlighted
Home,
Figure 36
19
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
r
l
l
l
l
l
l
parameters
Screen
type
auto
switch
to Graphics
auto
switch
to text
132 column
on text
screen
EGA/VGA display
support
set screen
coloR
Selects
emulation.
board
text/graphics
Text
For DHDW lines
After
screen
clear
Horizontal
scrolling
option
1: PC chars
screens
as primary
display
for
Usage
J:
Esc:
Alt-S:
Alt-X:
Selects
option
Cancels
exit
Setup
SmarTerm
?, 1:
End:
XP +:
(Highlighted
Home,
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
Figure 37
41. Once the final options are selected press the Esc key twice.
l
Figure 38 appears.
setup Mode
l
My favorite
parameters
l
Configuration
name
l
Primary
phone
number
l
Terminal
mode
l
cOmmunications
parameters
l
l
soft K ey Definitions
l
File
transfer
parameters
l
DEC terminal
Emulation
parameters
l
copy from Another
configuration
l
Quit
setup
l
exit
to DOS
User
-neyDoara
defined
UNIVERSAL
vT320
TRANSPONDER
7 bits
menu.
usage
J:
Esc:
Alt-S:
Alt-X:
Selects
option
Cancels
exit
Setup
SmarTerm
?, 1:
End:
KP +:
(Highlighted
Home,
Figure 38
20
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
42. Press Q to quit setup.
l
Figure 39 appears.
S
C
ESC
to
to
to
SAVE your
changes
CANCEL your
changes
RETURN to Setup
Mode
Figure 39
43. In Figure 39, press S to save the changes.
l
Figure 40 appears.
=Select
a configuration
l-DNIVERSAL
2 - Net
TRANSPONDER
9600
2
SmarTenn
1
Net
3 - 1200
Baud,
B/None
1200
4 - 1200
Baud,
l/Even
1200
5 - 2400
Baud,
S/None
2400
6 - 2400
Baud,
'I/Even
2400
7 - 9600
Baud,
S/None
9600
8 - 9600
Baud,
'I/Even
9600
320
Version
2.0a
(c)
Copyright
1992
by
+indicates
Speed
Make
Alt-S
?,
1,
Connect
a connection
: Setup
Home,
Persoft.
End
Alt-X
up
: Move
: Exit
or
using
examine
bar
highlighted
highlighted
cursor
SmarTerm
to
highlight
and
return
Inc.
configuration
configuration
a configuration
to
DOS
Figure 40
44. In Figure 40, hold down the Alt
key and press X to Exit SmarTerm and return to DOS.
Setup is now complete.
21
,
Universal Transponder Hardware Connection
Use the following illustration to install the communications
of a Universal Transponder.
cable from your PC to the Master Controller Motherboard
UNIVERSAL TRANSPONDER
b
-
- MASTER
CONTROLLER
MOTHERBOARD
RCV
ASSY. NO. 565-161
OR
ASSY. NO. 565-213
MASTER CONTROLLER
MOTHERBOARD
9 PIN FEMALE
CTS
PIN
PIN
PIN
PIN
H
Universal
Transponder
Hardware
22
Connection
2
3
4
5
-
PIN
PIN
PIN
PIN
3
2
7
0
25 PIN MALE
1
2120 Terminal
Mode Setup
The following steps will configure the SmarTerm 320 to use in a 2120 Terminal Mode.
45. At the DOS prompt C : \> type cd st320
and press
Enter.
l
and press Enter. At the DOS prompt C : \ST320>
type ST320
Figure 41 appears.
qSelect
a configuration
1 - UNIVERSAL
2 -Net
TRANSPONDER
9600
2
SmarTerm
Net
3-
1200
Baud,
a/None
1200
4-
1200
Baud,
7/Even
1200
5-
2400
Baud,
a/None
2400
6-
2400
Baud,
7/Even
2400
7 - 9600
Baud,
a/None
9600
8-
Baud,
7/Even
9600
320
Version
2.0a
(c)
Copyright
1992
by
9600
+ indicates
Keyboard
I
Speed
Persoft,
Connect
Usage
: Make
J
Alt-S
?,
k,
Home,
a connection
: Setup
End
Alt-X
46. In Figure 41, highlight or select Net
up
or
: Move
: Exit
using
examine
bar
cursor
SmarTerm
Figure 41
2.
23
highlighted
highlighted
to
highlight
and
return
configuration
configuration
a configuration
to
DOS
Inc.
-c
47. Hold down the Alt
key and press S to setup or examine the highlighted
Figure 42 appears with My favorite
l
parameters
highlighted
Setup
Mode
l
My favorite
parameters
l
Configuration
name
l
Primary
phone
number
l
Terminal
mode
l
communications
parameters
l
l
soft :: ey Definitions
l
File
transfer
parameters
l
DEC terminal
Emulation
parameters
l
copy from Another
configuration
II
User
defined
,-Keyboard
configuration.
or selected.’
Net
2
vT320
7 bi'
menu.
Usage
J:
Selects
Option
Esc: Cancels
Alt-S:
exit
Setup
Alt-X:
SmarTerm
T, 1:
End:
KP +:
(Highlighted
Home,
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
Figure 42
48. In Figure 42, press Enter to set up parameters.
Figure 43 appears.
l
-Setup Mode
b My favorite.parameters
. PAFMV
favor1
e Parameters
b”
--.a
~~
*
l
Configuration
name
l
Pr
l
Primary
phone
number
l
Te
0 l Terminal
mode
= p'c
Defines
current
configuration
l
so
l
Fi
l
DE
l
_
l
co
A--AI
yult
---so----
l
exit
to
User
defined
-Keyboard
J
T,
---
__--.
.
Net
2
vT320
7 bits
name.
.-.
DOS
menu.
Usage
:
COIIIphteS
& : Moves cursor
t:
Backspace
Ins:
Del:
Ctrl-End:
Ctrl-Home:
Insert
Delete
Delete
Delete
Figure 43
24
Esc:
toggle
char
Alt-S:
to endAlt-X:
KP +:
all
Prev screen
exit
Setup
exit
SmarTerm
Add to My Fav
param
49. In Figure 43, press C to select Configuration
Figure 44 appears.
l
rSetup
Mode
Mv favorite
narameters
Up to 30 characters
name of the current
I
name.
User
defined
-Keyboard
to define
configuration.
the
menu.
Usage
J:
Esc:
Alt-S:
Alt-X:
Selects
Option
Cancels
exit
Setup
SmarTerm
Home,
?, 1:
End:
KP -:
KP +:
Moves cursor
up/down
Moves cursor,
first/last
option
Removes
from My Favorite
Params
Grab and reposition
parameters
Figure 44
50. In Figure 44, type 2120
l
TERMINAL
MODE as the configuration
name and press Enter.
In Figure 45 Net 2 has been replaced with the words 2120 TERMINAL
I=Setup MO-,
l
My favorite
parameters
l
Configuration
name
l
Primary
phone
number
l
Terminal
mode
l
cOmmunications
parameters
l
l
soft E ey Definitions
l
File
transfer
parameters
l
DEC terminal
Emulation
parameters
l
copy
from Another
configuration
l
Quit
setup
l
exit
to DOS
Defines
rKeyboard
the
terminal-host
2120
Esc:
Alt-S:
Alt-X:
Selects
option
Cancels
exit
Setup
SmarTerm
TERMINAL
MODE
vtlO0
communications
Usage
J:
MODE.
_
environment.
T, 1: Moves
cursor
up/down
End: Moves cursor,
first/last
option
Parameters
(Highlighted
letter
also
selects
option)
Home,
Figure 45
25
c
51. In Figure 45, press T to select Terminal
Figure 46 appears.
l
Setup
l
mode.
1
coi,
Quit
exit
l
l
User
-Keyboard
DEC VT100
terminal.
Usage
J: Selects
option
Esc: Cancels
Alt-S:
exit
Setup
Alt-X:
SmarTerm
1‘, L:
End:
KP +:
(Highlighted
Home,
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
Figure 46
52. In Figure 46, select vTlO0
l
and press Enter.
Figure 47 appears.
c
Setup Mode
b My favorite
.earameters
. Co=My favori
e parameter
l
Configuration
name
l
Pr
l
Primary
phone
number
l
Te
0
l
Terminal
mode
= p"c
Selects
the terminal
l
so
l
Fi
l
DE
l
co_.
:
m;=;-~~-T-.
User
2120
TL-----.--
-----
vtlO0
your
IBM PC will
emulate.
--
defined
menu.
-Keyboard
Usage
Completes
j', .j,: Moves cursor
t:
Backspace
J:
Ins:
Del:
Ctrl-End:
Ctrl-Home:
Insert
Delete
Delete
Delete
Figure 47
26
toggle
Esc:
char
Alt-S:
to endAlt-X:
all
KP +:
Prev
screen
exit
Setup
exit
SmarTerm
Add to My Fav
param
53. In Figure 47, press the Esc key.
Figure 48 appears.
l
r
Setup
Mode
l
My favorite
parameters
l
Configuration
name
l
Primary
phone
number
l
Terminal
mode
l
cOmmunications
parameters
l
l
soft f ey Definitions
l
File
transfer
parameters
l
DEC terminal
Emulation
parameters
l
copy from Another
configuration
l
Quit
setup
l
exit
to DOS
User
defined
Keyboard
2120
TERMINAL
MODE
vtlO0
menu.
Usage
J: Selects
option
Esc: Cancels
Alt-S:
exit
Setup
Alt-X:
SmarTerm
?, &: Moves cursor
up/down
End: Moves cursor,
first/last
option
Parameters
(Highlighted
letter
also
selects
option)
Home,
Figure 48
54. In F.igure 48, press 0 to set up communications
Figure 49 appears.
l
-Setup
Model
l
l
l
l
l
l
l
Communicatio5
line
baud Hate
stop
Bits
Disconnect
on exit
Online/local
Local
echo
Fine-tuning
parameters
Selects
I
parameters.
Derinc..
-Keyboard
the
nEt 2
9600
Yes
Online
Disable
communications
~- _.._.. - .._^.
port
(line).
__^^ .._.-.-..--. .._-----.---_-..-..x_^..
."- .^^^"^l-^ll".-"-----
Usage
J:
Esc:
Alt-S:
Alt-X:
Selects
option
Cancels
exit
Setup
SmarTerm
?, &: Moves cursor
up/down
End: Moves cursor,
first/last
option
Parameters
(Highlighted
letter
also
selects
option)
Home,
Figure 49
27
Once the final options are selected stay in the Communications
l
Se
c -----
il favorite
.
l
l
l
l
l
l
l
l
.garameters
ni ations
parameters
Communication
line
baud Rate
stop
Bits
Disconnect
on exit
Online/local
Local
echo
Fine-tuning
parameters
Selects
Keyboard
parameters
the
screen.
Corn Port
1200
1
No
Online
Disable
communications
port
(line).
Usage
J:
Esc:
Alt-S:
Alt-X:
Selects
option
Cancels
exit
Setup
SmarTerm
?, &: Moves cursor
up/down
End: Moves cursor,
first/last
option
EP +: Adds to My Favorite
Parameters
(Highlighted
letter
also
selects
option)
Home,
Figure 50
56. In Figure 50, press F to display the Fine-tuning
parameters
screen.
Figure 51 appears.
l
,Setup
Mode
Corn Port
. pc
,c
l
soft
. File
l
DEC
l
cop
l
QUI
l
exit
2
’
l
l
Defines
-Keyboard
stop
Disc
' Onli
l
Loca
b Fine
Prov
envi
the
1
l
l
l
_
l
Maximum
transmit
rate
Flow
control
disconnect
duration
display
parity
Error
display
Overrun
error
Specifies
non-standard
Usage
J: Selects
option
Esc: Cancels
Alt-S:
exit
Setup
Alt-X:
SmarTerm
Unlimited
XON/XOFF
2
Yes
corn port
address.
communication
?, 1:
End:
EP +:
(Highlighted
Home,
Figure 51
28
set
Yes
For use
boards.
with
Moves cursor
up/down
Moves cursor,
first/last
option
Adds to My Favorite
Parameters
letter
also
selects
option)
57. Use arrow keys to select the parameter to be changed and press Enter. A list of selections
Corn Port
’
Fi
l
DE
l
l
COYA
Qu
errun
eX
l
___.
Defiw
,,
rKeyboard
Specifies
non-standard
will appear. Match
1
error
corn port
address.
communication
For use
boards.
with
Usage
J:
Esc:
Alt-S:
Alt-X:
Selects
option
Cancels
exit
Setup
SmarTerm
?, &: Moves cursor
up/down
End: Moves cursor,
first/last
option
Parameters
(Highlighted
letter
also
selects
option)
Home,
Figure 52
58. Once the final options are selected press the Esc key twice.
l
Figure 53 appears.
Setup Mode
l
My favorite
parameters
l
Configuration
name
l
Primary
phone
number
l
Terminal
mode
cOmmunications
parameters
soft K ey Definitions
File
transfer
parameters
DEC terminal
Emulation
parameters
copy from Another
configuration
Quit
setup
exit
to DOS
Defines
,-Keyboard
the
terminal-host
Usage
J:
Selects
option
Esc: Cancels
Alt-S:
exit
Setup
Alt-X:
SmarTerm
2120
vtlO0
communications
TERMINAL
MODE
II I
environment.
?, 1: Moves cursor
up/down
End: Moves cursor,
first/last
option
Parameters
(Highlighted
letter
also
selects
option)
Home,
Figure 53
29
59. In Figure 53, press Q to quit setup.
l
Figure 54 appears.
Press:
S
C
ESC
to
to
to
SAVE your
changes
CANCEL your
changes
RETURN to Setup
Mode
Figure 54
60. In Figure 54, press S to save changes.
l
Figure 55 appears.
q Select
a configuration
l-uNIvERSAL
TRANSPONDER
9600
7. - 2120
TERMINAL
MODE
3 - 1200
Baud,
B/None
1200
4 - 1200
Baud,
l/Even
1200
5 - 2400
Baud,
B/None
2400
6 - 2400
Baud,
l/Even
2400
7 - 9600
Baud,
a/None
9600
8 - 9600
Baud,
l/Even
9600
4indicatea
Sneed
Make
7,
&,
Home,
SmarTem
1200
(c)
320
Copyright
Connect
a connection
End
Alt-X
: Move
: Exit
using
bar
cursor
SmarTarm
highlighted
to
highlight
and
return
configuration
a configuration
to
DOS
Figure 55
61. In Figure 55, hold down the Alt
key and press X to Exit SmarTerm and return to DOS.
2120 Terminal Mode Setup is now complete.
30
2120 Terminal
Mode Hardware
Connection
Use the following illustration to install a communications
DB-25M
DB-25F
cable from your PC to a 2120 Multiplex System.
DB-25M
DE-SF
25 TO 25
25TO9
709-552
PIN 2 PIN 3 PIN 7 -
PIN 2
PIN 3
PIN 7
PIN 2 - PIN 3
PIN 3 - PIN 2
J”MkkTO
6
AND 8 TO 20
2120 Terminal
SmarTerm
Mode Hardware
320 KEYBOARD
Connection
MAPPING
,To display a table of SmarTerm’s keyboard references and the equivalent
Alt key and press H. Examples of SmarTerm’s keys are listed below.
l
A PF3 SmarTerm code is the same as F3.
l
A PF4 SmarTerm code is the same as F4.
l
A F18 SmarTerm code is the same as Alt 3.
l
A F19 SmarTerm code is the same as Alt 4.
31
PC keyboard references,
hold down the
OPERATING
THE SmarTerm
320 WITH A UNIVERSAL
TRANSPONDER
Use the following instructions to display alarms, troubles, or supervisories on your PC. You will also be able to
display Alarm and Trouble Historical Logs as well as System Functions and Reports.
1. At the DOS prompt C : \> type cd
and press Enter.
l
st320
type ST320
-c
Figure 56 appears.
=Select
a configuration
1 - UNIVERSAL
2 - 2120
TRANSPONDER
TERMINAL
9600
MODE
SmarTerm
1200
3-
1200
Baud,
8/None
1200
4-
1200
Baud,
7/Even
1200
5-
2400
Baud,
8/None
2400
6-
2400
Baud,
7/Even
2400
7-
9600
Baud,
8/None
9600
8-
9600
Baud,
7/Even
9600
320
Version
2.0a
(c)
Copyright
1992
by
+ indicates
=Keyboard
Speed
Persoft,
Inc.
Connect
Usage
J
Alt-S
?,
J,
: Make
Home,
a connection
: Setup
End
Alt-X
up or
: Move
: Exit
using
examine
bar
highlighted
highlighted
cursor
SmarTerm
to
highlight
and
return
configuration
configuration
a configuration
to
DOS
Figure 56
2. In Figure 56, select the UNIVERSAL
Note:
TRANSPONDER
and press the Enter key.
Hold down the Alt key and press X to Exit SmarTerm at any time. To select an operation,
of the operation and press Enter.
32
type the number
3. Hold down the Ctrl (Control)
Operator
1.
2.
3.
4.
5.
6.
Interface
key and press W. The screen will now display the 4190
Fire
Menu. See Figure 57 for list of operations from this screen.
- Display
any current
Alarms
Alarms
- Display
any current
Supervisory
Supervisory
Troubles
- Display
any current
Troubles
Alarm
Historical
Log (Allows
the display
and clearing
Trouble
Historical
Log (Allows
the display
and clearing
System
Functions
and Reports
of
Alarm
Logs)
of Trouble
Logs)
Figure 57
4. Operation number 6 in Figure 57 will give you a menu of reports and functions listed in Figure 58.
1.
2.
3.
4.
System
Print
Printer
Return
Functions
Reports
Options
to Main
Menu
(F18
or
Alt
3)
Figure 58
5. Operation number 1 in Figure 58 displays the operations
1.
2.
3.
4.
Login/Logout
Alarm
silence
System
reset
Return
to System
Function
and
listed in Figure 59.
Reports
Menu
(F19
or
ALT
4)
Figure 59
Note:
The silence and reset functions will not work if the Universal Transponder
6. Operation
1.
2.
3.
4.
5.
Report
Report
Report
Report
Return
number 2 from Figure 58 displays the operations
1,
2,
3,
4,
to
Alarm
Main
Alarm
Historical
Log
Trouble
Historical
Log
TrueAlarm
Status
Report
TrueAlarm
Service
Report
System
Function
and Reports
Figure 60
33
is on line.
listed in Figure 60.
Menu
(F19
or
ALT
4)
7. Operation number 3 from Figure 58 displays the operations listed in Figure 61.
1.
2.
3.
Terminate
Current
Report
Select
Report
Printer
Return
to System
Function
and
Reports
Menu
(F19
or
ALT
4)
I.
Figure 61
Note:
Selection of a printer was not completed in the SmarTerm
operations will not be available until a printer is selected.
34
320 software
installation.
The above printer
OPERATING
Use the following instructions
THE SmarTerm
to emulate a Remote Terminal on your PC.
1. At the DOS prompt c : \> type cd st320
and press Enter.
l
320 WITH A 2120
type ST320
Figure 62 appears
=Select
a configuration
1 - UNIVERSAL
2 - 2120
TERMINAL
3-
Baud,
1200
9600
TRANSPONDER
SmarTerm
1200
MODE
8/None
1200
4 - 1200
Baud,
'I/Even
1200
5-
2400
Baud,
B/None
2400
6 - 2400
Baud,
7/Even
2400
7 - 9600
Baud,
8/None
9600
8 - 9600
Baud,
7/Even
9600
320
Version
2.0a
(c)
Copyright
1992
by
+ indicates
__
Speed
Persoft,
Connect
Usage
J
Alt-S
?,
J,
: Make
a connection
: Setup
Home,
End
Alt-X
up
using
or
: Move
: Exit
examine
bar
cursor
SmarTerm
highlighted
highlighted
to
highlight
and
return
Figure 62
2. In Figure 62, select the 2120
l
Note:
TERMINAL
The Remote Terminal commands
Hold down the Alt
MODE and press the Enter key.
are now available on your PC.
key and press X to Exit SmarTerm at any time.
35
configuration
configuration
a configuration
to
DOS
Inc.
-c
NOTES
36
NOTES
37
NOTES
38
--.
aSimplex
Ed 10 93
Simplex
Time Recorder
Co.,
l
Simplex
Plaza
l
Gardner,
Massachusetts
01441-0001
U.S.A.
MUX2-21-013
(574-460)

SmarTerm 320 Installation-Operating Instructions

Transcription

Similar documents

Directions - Jericho School District

QuickDocs - HYPE Systems Inc.

280 Organizations - it

web hosting - AINS ICT Solutions

Mantenimiento Predictivo - New Challenges in the European Area

Travel Information for Vienna UZA2/Pharmaziezentrum Althanstraße

SES Bill Pay Portal Instructions

To Crooms AoIT - Crooms AoIT Business Advisory Council

Delft Noord

Directions to WBYA - Spirit Kick