door hardw are - Spokane Hardware Supply, Inc.

Transcription

To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Door hardware, what don’t we carry? Ranging from door locks for both residential and commercial to
strike plates and hinges. Door stops, bolts, kick plates, viewers, pulls, and filler plates. You name it, if it’s
door related, we’ve probably got it.
Door Hardware..........................341-454
Flush Door Pulls........................................................................................... 343-345
Edge Pulls...................................................................................................................346
Sliding and Pocket Door Passage/Privacy Latches................ 346-349
Sliding and Pocket Door Keyed Locks......................................................349
Schlage A-Series - Grade 2 Cylindrical Locks.................... 368-369
Schlage AL-Series - Grade 2 Cylindrical Locks................. 370-371
Schlage D-Series - Grade 1 Cylindrical Locks................... 372-373
Schlage ND-Series - Grade 1 Cylindrical Locks................ 374-377
Schlage B500-Series Grade 2 Deadbolts..................................... 378
Schlage B600-Series Grade 1 Deadbolts..................................... 378
Schlage B250-Series Grade 2 Deadlatch..................................... 378
Door Locks - Residential.......................... 350-367
Schlage Commercial Parts and Latches............................. 379-380
Emtek.............................................................................................. 351-352
Marks 175 Series - Grade 2 Cylindrical Locks............................ 381
Schlage Electronics.................................................................... 353-356
Townsteel CDC-Series - Grade 1 Cylindrical Locks.................. 382
Schlage F-Series Handlesets.................................................. 357-358
Townsteel XCE-2000-Series - Grade 1
Electronic Cylindrical Locks........................................................ 382
Schlage F-Series Knobs and Levers..................................... 359-361
Schlage B-Series Deadbolts............................................................. 362
Schlage RS-Series Interconnect..................................................... 363
Schlage Residential Parts and Latches............................... 363-364
Schlage J-Series Handlesets (Dexter)........................................... 364
Schlage J-Series Knobs and Levers (Dexter).............................. 365
Schlage J-Series Deadbolts (Dexter)............................................ 365
Kaba Simplex 5000 Series Mechanical
Push-Button Locks......................................................................... 383
Kaba E-Plex Electronic Locks.................................................. 383-384
Pocket/Sliding Door Handles and Locks
Pocket/Sliding Door Handles & Locks......341-349
Door Locks - Commercial........................ 368-386
Lock Parts and Cylinders.......................................................... 384-386
Key Blanks/Keying Accessories...................... 387
Schlage J-Series Parts and Latches (Dexter).............................. 366
Door Lock Strikes and Protectors.......... 388-392
Brinks Push-Pull-Rotate............................................................ 366-367
Strike Plates.................................................................................. 388-390
Door Reinforcers.................................................................................. 390
Latch and Lock Guards....................................................390-391, 404
Filler Plates & Hole Covers....................................................... 391-392
Boring Jig Kits and Installation Templates................................. 392
TEL
509.535.1663 TOLL-FREE
800.888.1663
www.spokanehardware.com
341
Builders Hardware Specialists Since 1945
DOOR HARDWARE
Replacment / Reproduction Knobs,
Roses and Door Sets............................ 393-394
Screen and Storm Door Hardware........ 418-420
Screw Cover Caps.............................................................................. 394
Screen Door Closers.................................................................. 419-420
Padlocks..................................................... 395-396
Door Accessories...................................... 397-417
Screen Door Hinges.................................................................. 419-420
Door Hinges.............................................. 419-433
Screen Door Hinges.................................................................. 419-420
Door Flush/Surface Bolts.....................................397-404
Bi-Fold Door Hinges.................................................................. 420-421
Foot and Cane Bolts....................................................................... 397
Concealed & Invisible Hinges......................................................... 422
Door Surface Bolts................................................................. 398-399
Door Hinges - Residential....................................................... 423-424
Door Flush Bolts and Coordinators................................. 400-402
Door Hinges - Commercial..................................................... 424-426
Door Guards and Night Latches....................................... 402-404
Spring Hinges & Pivots............................................................. 427-430
Door Pulls and Push Plates..................................404-405
Door Strap Hinges..................................................................... 431-433
Door Kick Plates.............................................................405
Door Stops/Holders..............................................406-414
Baseboard and Spring Stops............................................... 406-407
Floor Mount Door Stops....................................................... 408-410
Wall Mount Door Stops.................................................................. 408
Hinge Pin Door Stops............................................................ 410-411
Kickdown Door Stops............................................................ 411-412
Magnetic Door Stops and Door Holders........................ 412-413
Overhead Door Stops..................................................................... 414
Door Stops/Holders (continued)........................406-414
Door Knockers................................................................414
342
Screen Door Latches & Pulls............................................................ 418
Door Viewers and Speakeasy Grilles..........................415
Doorbell Buttons...........................................................415
House Numbers.....................................................415-416
Mail Slots and Boxes.............................................416-417
ADA Door Signs.............................................................417
TEL
509.535.1663 TOLL-FREE
Gate Hardware.......................................... 429-440
Gate Spring Hinges & Pivots.................................................. 429-430
Strap Hinges................................................................................. 431-433
Gate Spring Closers and Wheels........................................... 433-434
Gate Pulls............................................................................................... 434
Rim Locks and Latches............................................................. 434-436
Gate Latches and Bolts............................................................. 436-440
Hasps & Padlock Eyes......................................................................... 440
Door Bottoms, Thresholds and
Weatherstripping................................. 441-454
Door Thresholds....................................................441-445
Automatic Door Bottoms.....................................445-446
Door Bottom Shoes & Sweeps............................447-449
Replacement Door Shoe Vinyl................................................... 448
Door Astragals & Meeting Stiles.................................450
Weatherstrip and Gasketing...............................451-454
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Flush Door Pull
Flush Door Pulls
Flush Door Pull
• Solid brass, screws included.
• 50/box. Sold individually.
Product #
Finish
FP223U3
Polished Brass
• Solid brass, snap-in design.
FP223U5
Antique Brass
FP223U10B
Oil Rubbed Bronze
Product #
Finish
FP223U15
Satin Nickel
FP221RU3
Polished Brass
FP223U15A
Antique Nickel
FP221RU5
Antique Brass
FP223U19
Flat Black
FP221RU10B
Oil Rubbed Bronze
FP223U26
Polished Chrome
FP221RU15
Satin Nickel
FP223U26D
Satin Chrome
FP221RU15A
Antique Nickel
FP221RU26
Polished Chrome
FP221RU26D
Satin Chrome
Flush Door Pull
Flush Door Pull
• Built-in prong design eliminates need for screws or brads.
• Constructed of cast brass.
Product #
Finish
221B15A
Antique Nickel
221B-716
Aged Bronze
Flush Door Pull
Product #
Finish
FP222U3
Polished Brass
FP222U5
Antique Brass
FP222U10B
Oil Rubbed Bronze
FP222U15
Satin Nickel
FP222U14
Polished Nickel
FP222U19
Flat Black
FP222U26
Polished Chrome
Flush Door Pull
• Durable solid cast brass, screws included.
• Features snap-in design.
Product #
Finish
20-2600AB
Antique Brass
20-2600PB
Polished Brass
20-2600PC
Polished Chrome
Product #
Finish
20-2600ORB
Oil Rubbed Bronze
FP4134U10B
Oil Rubbed Bronze
20-2600SN
Satin Nickel
FP4134U15
Satin Nickel
TEL
509.535.1663 • Durable solid cast brass, brads included.
TOLL-FREE
800.888.1663
343
DOOR HARDWARE
Flush Door Pull
Sliding Door Pull
New Item!
• Durable solid cast brass, screws included.
• 304 Grade stainless steel.
• Can be accessed from door front, back or edge.
• Install with adhesive such as 2-part epoxy or equivalent.
Product #
Finish
FP7178U10B
Oil Rubbed Bronze
FP7178U14
Polished Nickel
Product #
Door Thickness (A)
Finish
FP7178U15
Satin Nickel
DSI-4251-35
1-3/8” (35mm)
Satin Stainless Steel
FP7178U19
Flat Black
DSI-4251-45
1-3/4” (45mm)
FP7178U26
Polished Chrome
Sliding Door Pull
Flush Door Pull
New Item!
• Solid stainless steel, exposed screw design.
• Screws included.
Product #
Finish
FP155U32D
Brushed Stainless Steel
Sliding Door Pull
Product #
Door Thickness (A)
Finish
DSI-4253-35
1-3/8” (35mm)
DSI-4253-45
1-3/4” (45mm)
Sliding Door Pull
New Item!
• Concentric handle for single or double sliding doors.
Product #
Door Thickness (A)
DSI-3250-35 1-3/8” (35mm)
DSI-3250-45 1-3/4” (45mm)
344
TEL
509.535.1663 New Item!
Overall Width (C) Finish
Satin Stainless
1-17/32” (39mm)
Steel
Satin Stainless
1-15/16” (49mm)
Steel
TOLL-FREE
Product #
Door Thickness (A)
Finish
DSI-4254-100-35
1-3/8” (35mm)
DSI-4254-100-45
1-3/4” (45mm)
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Flush Door Pull
Flush Ring Pulls
• Large scale design, perfect for barn door style applications.
• Requires 7/8” deep mortise, for minimum door thickness of 1-3/4”.
• Overall size: 4”W x 6”H.
• Cutout size: 2”W x 3-5/8”H.
• Fasteners included.
Product #
Finish
0070-00005SC
Black
Flush Door Pull
• Solid brass, includes screws.
Product #
Finish
FRP175CR003
Lifetime Brass
Product #
Finish
FRP175U3
Polished Brass
0535-00489SC
Black
FRP175U5
Antique Brass
FRP175U10B
Oil Rubbed Bronze
FRP175U15
Satin Nickel
FRP175U15A
Antique Nickel
FRP175U19
Flat Black
FRP175U26
Polished Chrome
FRP175U26D
Satin Chrome
FRP25U3
Polished Brass
FRP25U5
Antique Brass
FRP25U10B
Oil Rubbed Bronze
FRP25U15
Satin Nickel
FRP25U15A
Antique Nickel
FRP25U19
Flat Black
FRP25U26
Polished Chrome
FRP25U26D
Satin Chrome
TEL
509.535.1663 TOLL-FREE
800.888.1663
• Perfect for barn door style applications.
• Requires 7/8” deep mortise, for minimum door thickness of 1-3/8”.
• Overall size: 3-3/8”W x 5-1/4”H;
• Cutout size: 2-13/16”W x 3-13/16”H.
• Fasteners included.
345
DOOR HARDWARE
Edge Pulls
Recessed Door Edge Pull
Pocket Door Edge Pull
• Minimum door thickness: 1-3/16” (30mm).
• Solid brass; includes screws.
Product #
Finish
EP475U3
Polished Brass
EP475U5
Antique Brass
EP475U10B
Oil Rubbed Bronze
EP475U14
Polished Nickel
EP475U15
Satin Nickel
EP475U19
Flat Black
EP475U26
Polished Chrome
EP475U26D
Satin Chrome
Product #
Finish
YK-W100
Sliding and Pocket Door Passage/Privacy
Latches
Pocket Door Latches
Pocket Door Edge Pulls
• 990A/991A: Made of aluminum; 990B/991B: Made of solid brass.
• Door Cutout size: 2-1/4”H x 1-3/4”W.
• For 1-3/8” to 1-1/2” thick doors.
• Strike plate included on privacy sets.
• Built in door edge pull to easily pull the door out of the pocket.
• Solid brass.
• Includes mounting hardware.
Product #
Finish
EP6125U10B
Oil Rubbed Bronze
EP6125U15
Satin Nickel
Recessed Door Edge Pull
• Minimum door thickness: 1-3/16” (30mm).
346
Product #
Finish
YK-70
TEL
509.535.1663 TOLL-FREE
Product #
Description
Finish
990B3
Passage
Polished Brass
990B5
Passage
Antique Brass
990A14
Passage
Polished Nickel
990B26
Passage
Polished Chrome
990B-613
Passage
Oil Rubbed Bronze
990B-619
Passage
Satin Nickel
990B-620
Passage
Antique Nickel
990B-716
Passage
Aged Bronze
991B3
Privacy
Polished Brass
991B5
Privacy
Antique Brass
991A14
Privacy
Polished Nickel
991B26
Privacy
Polished Chrome
991B-613
Privacy
Oil Rubbed Bronze
991B-619
Privacy
Satin Nickel
991B-620
Privacy
Antique Nickel
991B-716
Privacy
Aged Bronze
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Heavy-Duty Pocket Door Latch/Receiver For
Double Doors
• Solid brass.
• For 1-3/8” thick doors.
• Strike plate is included on privacy.
Product #
Description
Finish
SDP25U26D
Passage
Satin Chrome
SDL25U26D
Privacy
Satin Chrome
DOOR HARDWARE
Pocket Door Latches
New Item!
• Design allows for face-to-face locking with our Privacy model SDLA325 to
complete a double pocket door set.
• Solid brass.
Heavy-Duty Pocket Door Latches
Product #
Finish
SDAR32510B
Oil Rubbed Bronze
SDAR325U15
Satin Nickel
SDAR325U19
Flat Black
SDAR325U26
Polished Chrome
SDAR325U26D
Satin Chrome
Contemporary Pocket Door Latches
Product #
Description
Finish
SDPA325CR003
Passage
Lifetime Brass
SDPA325U3
Passage
Polished Brass
SDPA325U5
Passage
Antique Brass
SDPA325U10B
Passage
Oil Rubbed Bronze
SDPA325U15
Passage
Satin Nickel
SDPA325U15A
Passage
Antique Nickel
SDPA325U19
Passage
Flat Black
SDPA325U26
Passage
Polished Chrome
Product #
Description
Finish
SDPA325U26D
Passage
Satin Chrome
SDL60U10B
Privacy
Oil Rubbed Bronze
SDLA325CR003
Privacy
Lifetime Brass
SDL60U15
Privacy
Satin Nickel
SDLA325U3
Privacy
Polished Brass
SDP60U10B
Passage
Oil Rubbed Bronze
SDP60U15
Passage
Satin Nickel
SDLA325U5
Privacy
Antique Brass
SDLA325U10B
Privacy
Oil Rubbed Bronze
SDLA325U15
Privacy
Satin Nickel
SDLA325U15A
Privacy
Antique Nickel
SDLA325U19
Privacy
Flat Black
SDLA325U26
Privacy
Polished Chrome
SDLA325U26D
Privacy
Satin Chrome
TEL
509.535.1663 TOLL-FREE
• Solid brass.
800.888.1663
• Solid brass.
347
DOOR HARDWARE
Pocket Door Latches
Pocket Door Privacy Bolt
• Fits 1-3/8” to 1-3/4” thick doors, standard 2-1/8” bore hole.
• Push-pull retractable with 1” throw bolt.
• 2-3/8” fixed backset latch with radius corner faceplate.
• Includes radius corner strikeplate.
• Designed to be face mounted at the rear of a closed pocket door, acting
as a privacy bolt to prevent door from opening. It works like a rocker
switch. When pushed in, the other half pops out, physically preventing
the door from returning into its pocket.
• 3/16” diameter hole may be drilled through door for emergency release.
• Includes 2 screws, bite strike plate and emergency hole washer.
Product #
Description
Finish
33-ORB690RD
Passage
Oil Rubbed Bronze
33-SN690RD
Passage
Satin Nickel
33-ORB680RD
Privacy
Oil Rubbed Bronze
33-SN680RD
Privacy
Satin Nickel
Pocket Door Latches
Product #
Finish
PDB42U3
Polished Brass
PDB42U10B
Oil Rubbed Bronze
PDB42U15
Satin Nickel
Sliding Door Privacy Latch
• For 1-3/8” thick doors.
• Fits standard 2-1/8” round bore, 2-3/8” backset.
• Features automatic latching.
Product #
Description
Finish
1501-15P1
Passage
Satin Nickel
1501-3PK1
Passage
Brass
1521-15P1
Privacy
Satin Nickel
1521-3PK1
Privacy
Brass
• Sliding door latch for 1-1/8” (28mm) - 1-9/16” (40mm) thick doors.
• 304 grade stainless steel.
• Non-handed, sliding door application only.
• Strike plate included.
Product #
Description
Finish
HC-30
Privacy
Sliding Door Privacy Latch with Indicator
• For 1-1/8” (28mm) - 1-9/16” (40mm) thick doors.
• Red is occupied, blue is unoccupied.
348
TEL
509.535.1663 TOLL-FREE
Product #
Description
Finish
HC-30H
Privacy
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Folding Closet Door Lock
• For 1-1/8” (28mm) - 2” (52mm) thick doors.
• Thumbturn on both sides for easy access.
Product #
Description
Finish
• For any two or four-door bi-fold installation.
• Includes 2 strike options, finishing ring and two keys.
• Keyed different.
• For 3/4” to 1-3/8” thick doors.
• Bore diameter: 1”.
HC-30R
Passage
Product #
Finish
PB1064-US26D
Brushed Chrome
PB1064-US3
Polished Brass
Sliding Door Privacy Latch with Lever
DOOR HARDWARE
Sliding and Pocket Door Keyed Locks
Sliding Door Passage Latch for Thick Doors
Sliding Pocket Door Lock
• Includes all metal lock, jamb strike, finishing ring and two keys.
Product #
Description
Finish
HC-30L
Privacy
BX1062-US26D
Satin Chrome
BX1062-US3
Polished Brass
• One half turn of key raises tongue and prevents door from entering
pocket.
• Includes all metal lock, jamb strike, finishing ring and two keys.
• Slim design suitable for many applications.
• Easy operation slide knob to lock and unlock.
• Non-handed, includes strikeplate.
Product #
Finish
HC-70
509.535.1663 Finish
Sliding Door Lock
Surface Mount Sliding Door Latch
TEL
Product #
• Sliding door latch with large lever for easy operation.
• For 1-1/8” (28mm) - 1-9/16” (40mm) thick doors.
• Lever projection: 1-1/4”.
TOLL-FREE
Product #
Finish
PB1068-US26D
Satin Chrome
PB1068-US3
Bright Brass
800.888.1663
349
DOOR HARDWARE
Door Locks - Residential
350
TEL
509.535.1663 TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Emtek
TEL
509.535.1663 TOLL-FREE
800.888.1663
351
DOOR HARDWARE
352
TEL
509.535.1663 TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Door
Locks - Residential
Schlage
Residential
Product Information
Functions
Schlage Electronics
FinisHes
F&B SERIES
J SERIES
Single Cylinder Deadbolt
B60
JD60
Passage Lock (hall & closet)
F10
J10
Privacy Lock (bed & bath)
F40
J40
Keyed Entry Lock
F51A
J54
Dummy Lock
F170
J170
Outside Trim of Handleset
F58
JH58
Inside Trim of Handleset
F59
JH59
Lower Half of Handleset
FE285
n/a
Keypad Entry (Auto-Lock)
FE575
n/a
Keypad Entry (Flex-Lock)
FE595
n/a
Schlage Touch Lever
FE695
n/a
Keypad Deadbolt
BE365
n/a
Schlage Touch™ Deadbolt
BE375
n/a
Schlage Connect Deadbolt
BE469
n/a
™
CODE (US CODE)
DESCRIPTION
505 (US L03)
Lifetime Bright Brass
605 (US 3)
Bright Brass
608
Satin Brass
609 (US 5)
Antique Brass
613 (US 10B)
Oil Rubbed Bronze (living finish)
618
Polished Nickel
619 (US 15)
Satin Nickel
620 (US 15A)
Antique Pewter/Nickel
621
Distressed Nickel
622 (US 19)
Matte Black
625 (US 26)
Bright Chrome
new
coMing soon
new
coMing soon
DOOR PREPARATION
(for knob & levers)
1"
25 mm
2-3/8" or 2-3/4"
60 mm or 70 mm
626 (US 26D) Satin Chrome
2-1/4"
57 mm
7/8" or 1" dia.
20 mm or 25 mm
Download Templates at thehardwarehut.com
630 (US32D)
716 (US 11P)
Aged Bronze
2-1/8"
54 mm
inside
hinge
DOOR HANDING
Handing of all doors is determined from the exterior of the
room’s entrance.
hinge
outside
lH
RH
lefthand
• Ifthehingeisontheleftsideofthedoor,thedooris“lefthand”(LH)
righthand
inside
• Ifthehingeisontherightsideofthedoor,thedooris“righthand”(RH)
• Toorderahandedproduct,pleasespecify(LH)or(RH)
• Toorderahandleset,handingisstilldeterminedfromtheexteriorof
thedoor.Wewillusethatinformationtodeterminethehandingfor
theinsideofthedoor.
TEL
509.535.1663 TOLL-FREE
800.888.1663
hinge
hinge
outside
353
DOOR HARDWARE
FE695 Touch™ Electronic Lever
Schlage Electronics
BE375 Touch™ Electronic Deadbolt
New Item!
New Item!
354
With Schlage Touch™ no key means there’s nothing to lose, nothing to
fiddle with and for would-be intruders, no cylinder to pick. All in a slim profile that’s as sleek as it is strong.
Features:
• Numeric touchscreen - fingerprint resistant, works in the rain and when
you’re wearing gloves.
• Slim profile, works with screen doors.
• LED Down lighting.
• 2-Year battery life with 9V battery backup.
Specifications:
• Function: BE375 Touchscreen Deadbolt - Deadbolt retracted by
entering valid user code then rotating outside thumbturn, or by inside
thumbturn. Deadbolt thrown by using outside thumbturn after pressing
Schlage button, or by inside thumbturn.
• Certification: ANSI/BHMA Grade 2 certified.
• Warranty: 3 year electronics, limited lifetime mechanical and finish.
• Door Prep: Fits standard 2-1/8” crossbore, 1” edge bore.
• Door Thickness: 1-3/8” to 1-3/4”.
• Codes: 2 pre-set unique 4-digit user codes, storage of up to 19 access
codes.
• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1” throw.
• Latch Faceplate: 1” x 2-1/4”.
• Product Dimensions: 3”W x 5.4”H.
Product #
Style
Stock Finishes
BE375-CAM
Camelot
619, 716
BE375-CEN
Century
619, 622, 625, 626, 716
TEL
509.535.1663 TOLL-FREE
With Schlage Touch™ no key means there’s nothing to lose, nothing to
fiddle with and for would-be intruders, no cylinder to pick. All in a slim profile that’s as sleek as it is strong.
Features:
• Numeric touchscreen - fingerprint resistant, works in the rain and when
you’re wearing gloves.
• Slim profile.
• LED Down lighting.
• 2-Year battery life with 9V battery backup.
Specifications:
• Function: FE695 Touchscreen Lever - Unlocked by valid user code
from outside. Inside lever always unlocked. Interior switch sets lock to
unlocked or automatic re-locking modes.
• Door Prep: Fits standard 2-1/8” crossbore, 7/8” edge bore.
• Door Thickness: 1-3/8” to 1-3/4”.
codes.
• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latch; 1/2” throw.
• Product Dimensions: 3”W x 5-3/8”H.
Product #
Style
Stock Finishes
FE695-CAMXACC
Camelot x Accent
619, 716
FE695-CENXLAT
Century x Latitude
619, 622, 625, 626, 716
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
FE575 Electronic Keypad Entry with Auto-Lock
DOOR HARDWARE
BE365 Electronic Keypad Deadbolt
Automatically relocks after 5 seconds; no need to remember to relock the
door - The perfect solution for storage and utility rooms, cleaning closets,
etc...
Innovative Turn Lock feature allows you to lock & leave without a key. Ideal
for front doors, side & back doors, garage entry doors, etc. Features:
• Wear-resistant silicone coated keypad.
• Manual bolt throw ensures the bolt is engaged.
• Warning alert sounds after 4 incorrect codes entered and lock disabled
for 30 seconds.
• Easy installation, no need to run wires.
• Manual key override.
• Low battery indicator.
• Battery operated with over 3 year battery life.
Product #
Style
Stock Finishes
BE365-CAM
Camelot
619, 716
BE365-PLY
Plymouth
605, 619, 626, 716
Specifications:
• Function: FE575 Keypad Entry with Auto-Lock - Auto-locking, automatically re-locks after 5 seconds. Unlocked by valid user code from
outside. Inside knob or lever always unlocked. Key can be used to unlock
as backup
• Door Thickness: 1-3/8” to 1-3/4” standard.
codes.
• Cylinder: 5 pin, C keyway.
Product #
Style
Stock Finishes
FE575-PLYXELA
Plymouth x Elan
626
Specifications:
• Function: BE365 Keypad Deadbolt - Deadbolt thrown from outside
by keyway turn after pressing Schlage button or by inside thumbturn.
Deadbolt retracted from outside by entering valid user code then rotating keyway turn or by inside thumbturn. Key can be used to unlock as
backup.
• Door Prep: Fits standard 2-1/8” crossbore.
codes.
Features:
• Warning alert sounds after 4 incorrect codes entered and lock disabled
for 30 seconds.
Schlage BE365 Electronic Deadbolt Extra Thick
Door Kit
• For use with Schlage BE365-Series Electronic Deadbolts.
• Thick Door Kit for a 1-7/8” (48mm) to 2-1/2” (64mm) thick door.
Product #
02-007
TEL
509.535.1663 TOLL-FREE
800.888.1663
355
DOOR HARDWARE
FE595 Electronic Keypad Entry with Flex-Lock
FE285 Entrance Lower Handleset w/Interior
Lever
• Lower half of front entryset only, no deadbolt, to be used with an
existing Deadbolt or Electronic Deadbolt.
• Adjustable through-bolt at bottom of handle slides up and down 1-1/2”
to accommodate a variety of pre-existing holes.
Flexibilty to choose; switch from automatic relocking to unlocked as
needed. Provides additional layers of keyless security & protection inside
your home or office.
Features:
• Warning alert sounds after 4 incorrect codes entered and lock disable for
30 seconds.
356
Specifications:
• General: Minimum 5-1/2” Center-to-Center distance recommended
between cross bore holes.
• Warranty: Limited lifetime mechanical and finish.
Product #
Style
Stock Finishes
FE285-CAMXACC-LH/RH
Camelot x Accent
619, 716
Specifications:
• Function: FE595 Keypad Entry with Flex-Lock - Flex-locking, switch
between unlocked or automatic re-locking. Unlocked by valid user code
from outside. Inside knob or lever always unlocked. Key can be used to
unlock as backup.
codes.
Product #
Style
Stock Finishes
FE595-CAMXACC
Camelot x Accent
619, 716
FE595-CAMXGEO
Camelot x Georgian
609, 619
FE595-PLYXELA
Plymouth x Elan
626
FE595-PLYXPLY
Plymouth x Plymouth
605
TEL
509.535.1663 TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
F-Series Handleset Exterior - Century
F-Series Handleset Exterior - Addison
Schlage F-Series Handleset Features:
• Adjustable components on deadbolt and grip to fit on existing, predrilled doors.
• Heavy, one-piece construction protects against prying.
• Snap & Stay™ holds deadbolt in place during installation.
Product #
Function
Stock Finishes
F58-CEN
Single Cylinder
619, 622, 625, 626, 716
F-Series Handleset Exterior - Greenwich
Product #
Function
Stock Finishes
Single Cylinder
619, 621, 622, 716
F-Series Handleset Exterior - Camelot
Product #
Function
Stock Finishes
F58-GRW
Single Cylinder
619, 622, 625, 716
F-Series Handleset Exterior - Plymouth
Product #
Function
Stock Finishes
F58-CAM
Single Cylinder
505, 613, 619, 620, 716
TEL
509.535.1663 TOLL-FREE
Product #
Function
Stock Finishes
F58-PLY
Single Cylinder
505, 609, 613, 619, 620, 716
800.888.1663
Specifications:
• Function: F58 Handleset/Entrance Lock Exterior. Outside Grip and
and Deadbolt Trim. Pair with an F59 Interior Trim for a complete handleset.
• Certification: ANSI/BHMA A156.36, 2010, Grade 1 Auxiliary Lock.
• Door Prep: Fits standard 2-1/8” crossbores, 1” edge bores.
• Door Prep: Min. 5-1/2” center-to-center between cross bore holes.
• Latch/Backset: Adjustable 2-3/8” or 2-3/4” backset latches.
F58-ADD
DOOR HARDWARE
Schlage F-Series Handlesets
357
DOOR HARDWARE
F-Series Handleset Interior Trim
F-Series Handleset Interior Trim
Decorative Collection
Schlage Decorative Collection offers coordinating escutcheon styles in
Handlesets, Deadbolts and all functions of Knobs and Levers.
358
Specifications:
• Function: F59 Handleset/Entrance Lock Interior. Inside trim, deadbolt, thumbturn, latches, screw and strikes.
• Pair with an F58 for a complete handleset.
• Handing required on levers as noted (LH/RH).
Specifications:
• Function: F59 Handleset/Entrance Lock Interior. Inside trim, deadbolt, thumbturn, latches, screw and strikes.
• Pair with an F58 for a complete handleset.
Product #
Style
Stock Finishes
Latitude Lever x Century
619, 625, 716
F59-MER-CEN-LH/RH
Merano Lever x Century
619, 716
F59-ACC-CAM-LH/RH
Accent Lever x Camelot
619, 716
F59-ACC-ADD-LH/RH
Accent Lever x Addison
619, 716, 621
Georgian Knob x Addison
716, 619, 621
Style
Stock Finishes
F59-GEO-ADD
F58/B60 Series Handleset/Deadbolt Extra Thick
Door Kit
F59-ACC-LH/RH
Accent Lever
605, 609, 613, 619, 620, 716
F59-ELA
Elan Lever
605, 626
F59-FLA-LH/RH
Flair Lever
605, 609, 716
F59-LAT
Latitude Lever
619, 716
F59-MER-LH/RH
Merano Lever
619, 716
F59-BWE
Bowery Knob
622, 716, 619
F59-GEO
Georgian Knob
609, 619, 620, 716
F59-ORB
Orbit Knob
605, 613
F59-PLY
Plymouth Knob
605, 613, 619, 625, 716
F59-SIE
Siena Knob
613, 619
TEL
Product #
F59-LAT-CEN
509.535.1663 • For use with Schlage F58/F60/B60-Series Handlesets and Deadbolts.
• Extra Thick Door Kit for a 2” (51mm) to 2-1/4” (57mm) thick door.
TOLL-FREE
Product #
Finish
61-075-619
Satin Nickel
61-075-716
Aged Bronze
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Schlage F-Series Knobs and Levers
F-Series Accent w/Camelot Trim
F-Series Accent
Schlage F-Series Knob & Lever Features:
• Highest residential security for a lever product.
• Specify handing on dummy and storeroom functions.
Specifications:
• Certification: ANSI/BHMA Grade 2; ADA-Compliant Levers.
Product #
Function
Stock Finishes
F10-ACC
Passage
605, 609, 613, 619, 620, 622, 716
F40-ACC
Privacy
605, 609, 613, 619, 620, 622, 716
F51A-ACC
Keyed Entry
605, 609, 613, 619, 620, 622, 716
F80-ACC-LH/RH
Storeroom
Single Dummy
Lever
619
F170-ACC-LH/RH
• ANSI/BHMA Grade 2; ADA-Compliant.
• Limited lifetime finish and mechanical guarantee.
• Specify handing on dummy functions.
Product #
Function
Stock Finishes
F10-ACC-CAM
Passage
619, 716
F40-ACC-CAM
Privacy
619, 716
F51A-ACC-CAM
Keyed Entry
619, 716
F170-ACC-CAM-LH/RH
Single Dummy Lever
619, 716
F-Series Elan
605, 609, 613, 619, 620, 622, 716
F-Series Accent w/Addison Trim
Stock Finishes
F10-ACC-ADD
Passage
619, 621, 716
Privacy
619, 621, 716
F51A-ACC-ADD
Keyed Entry
619, 621, 716
F170-ACC-ADD-LH/RH
Single Dummy Lever
619, 621, 716
509.535.1663 Stock Finishes
605, 626
F40-ELA
Privacy
605, 626
F51A-ELA
Keyed Entry
605, 626
F80-ELA
Storeroom
626
F170-ELA
Single Dummy Lever
605, 626
TOLL-FREE
Function
F40-ACC-ADD
TEL
Function
Passage
F-Series Flair
Product #
Product #
F10-ELA
Product #
Function
Stock Finishes
F10-FLA
Passage
605, 609, 716
F40-FLA
Privacy
605, 609, 716
F51A-FLA
Keyed Entry
605, 609, 716
F170-FLA-LH/RH
Single Dummy Lever
605, 609, 716
800.888.1663
359
DOOR HARDWARE
F-Series Latitude
F-Series Merano
Product #
Function
Stock Finishes
F10-LAT
Passage
619, 716
F40-LAT
Privacy
619, 716
F51A-LAT
Keyed Entry
619, 716
F170-LAT
Single Dummy Lever
619, 716
F-Series Latitude w/Century Trim
Function
Stock Finishes
F10-LAT-CEN
Passage
619, 625, 716
F40-LAT-CEN
Privacy
619, 625, 716
F51A-LAT-CEN
Keyed Entry
619, 625, 716
F170-LAT-CEN
Single Dummy Lever
619, 625, 716
F-Series Manhattan
Stock Finishes
619, 716
F40-MER
Privacy
619, 716
F51A-MER
Keyed Entry
619, 716
F170-MER-LH/RH
Single Dummy Lever
619, 716
Product #
Function
Stock Finishes
F10-MER-CEN
Passage
619, 716
F40-MER-CEN
Privacy
619, 716
F51A-MER-CEN
Keyed Entry
619, 716
F170-MER-CEN-LH/RH
Single Dummy Lever
619, 716
F-Series Bowery w/Greyson Trim
360
Function
Passage
F-Series Merano w/Century Trim
Product #
Product #
F10-MER
Product #
Function
Stock Finishes
F10-MNH
Passage
619
F40-MNH
Privacy
619
F51A-MNH
Keyed Entry
619
F170-MNH-LH/RH
Single Dummy Lever
619
TEL
509.535.1663 TOLL-FREE
• ANSI/BHMA Grade 2.
Product #
Function
Stock Finishes
F10-BWE-GSN
Passage
619, 622, 625, 716
F40-BWE-GSN
Privacy
619, 622, 625, 716
F51A-BWE-GSN
Keyed Entry
619, 622, 625, 716
F170-BWE-GSN
Single Dummy Knob
619, 622, 625, 716
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
F-Series Plymouth
Product #
Product #
Function
Stock Finishes
Function
DOOR HARDWARE
F-Series Georgian
Stock Finishes
F10-GEO
Passage
609, 619, 620, 716
F10-PLY
Passage
605, 613, 619, 622, 625, 716
F40-GEO
Privacy
609, 619, 620, 716
F40-PLY
Privacy
605, 613, 619, 622, 625, 716
F51A-GEO
Keyed Entry
609, 619, 620, 716
F51A-PLY
Keyed Entry
605, 613, 619, 622, 625, 716
F170-GEO
Single Dummy Knob
609, 619, 620, 716
F170-PLY
Single Dummy Knob
605, 613, 619, 622, 625, 716
F-Series Siena
F-Series Georgian w/Addison Trim
Function
Stock Finishes
Passage
613, 619
F40-SIE
Privacy
613, 619
Product #
Stock Finishes
F51A-SIE
Keyed Entry
613, 619
F170-SIE
Single Dummy Knob
613, 619
Function
F10-GEO-ADD
Passage
619, 621, 716
F40-GEO-ADD
Privacy
619, 621, 716
F51A-GEO-ADD
Keyed Entry
619, 621, 716
F170-GEO-ADD
Single Dummy Knob
619, 621, 716
F-Series Orbit
ADDITIONAL SCHLAGE STYLES AND
FINISHES SHOWN ONLINE!
Product #
F10-SIE
Visit www.thehardwarehut.com
Product #
Function
Stock Finishes
F10-ORB
Passage
605, 609, 613, 625, 626
F40-ORB
Privacy
605, 609, 613, 625, 626
F51A-ORB
Keyed Entry
605, 609, 613, 625, 626
F170-ORB
Single Dummy Knob
605, 609, 613, 625, 626
TEL
509.535.1663 TOLL-FREE
800.888.1663
361
DOOR HARDWARE
Schlage B-Series Deadbolts
B60-Series Deadbolt w/Century Trim
B60/B62-Series Deadbolts
B60/B60 Deadbolt Features:
• ANSI Grade 1 - professional grade security.
• Heavy, one-piece metal construction protects against prying.
• Snap & Stay™ holds deadbolt in place during installation.
Specifications:
• Function: B60 Single Cylinder Deadbolt - Operated with key on exterior and thumb turn on interior trim.
• Function: B62 Double cylinder deadbolt - Operated with key on
exterior and interior trim.
• Certification: ANSI/BHMA A156.36, 2010 Grade 1.
• Door Prep: Fits standard 2-1/8” or 1-1/2” crossbore.
Product #
Function
Stock Finishes
B60N-CEN
Single Cylinder
619, 625, 716
B60-Series Deadbolt w/Camelot Trim
Product #
Function
Stock Finishes
B60N
Single Cylinder
605, 609, 613, 619, 620, 622, 625, 626, 716
• Schlage Decorative Collection Deadbolt featuring Camelot Trim.
• All same features of standard B60 deadbolts.
B62N
Double Cylinder
605, 609, 613, 619, 620, 622, 626, 716
Product #
Function
Stock Finishes
B60N-CAM
Single Cylinder
619, 716
B60-Series Deadbolt w/Addison Trim
B81-Series One-Sided Deadbolt w/Exterior
Trim Plate
• Schlage Decorative Collection Deadbolt featuring Addison Trim.
Product #
Function
Stock Finishes
B60N-ADD
Single Cylinder
619, 621, 716
B60-Deadbolt Extra Thick Door Kit
• For use with Schlage B60-Series Deadbolts.
• Extra Thick Door Kit for a 2” (51mm) to 4” (102mm) thick door.
362
• Schlage Decorative Collection Deadbolt featuring Century trim.
Product #
Finish
61-073-619
Satin Nickel
61-073-716
Aged Bronze
TEL
509.535.1663 TOLL-FREE
Specifications:
• Function: B81 One-Sided deadbolt with exterior plate. Deadbolt
thrown or retracted from interior side only. Exterior plate covers exposed
prep on outside. Non-graded.
Product #
Function
Stock Finishes
B81
One-Sided Deadbolt
619, 626, 716
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Schlage Residential Parts and Latches
RS210F Mechanical Interconnect Lockset
F-Series Triple-Option Spring Latch
Features:
• Panic-free, single motion egress meets Life & Safety code requirements.
• Ideal for both new construction and renovation/aftermarket projects.
• Easy to install, fits standard door preparations.
Specifications:
• Function: RS210F: Single Locking. Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully
thrown. Latch retracted by lever from either side. Turning inside lever
retracts deadbolt and latch simultaneously for immediate exit.
• Certification: ANSI/BHMA A156.12-2005, Grade 2, UL 3 hour rating.
• Door Prep: Fits standard 2-1/8” crossbore; 4” or 5-1/2” center-to-center.
• Handing: Reversible in field.
Product #
Style
Finish
RS210FACC619PLY
Accent Lever w/Plymouth Trim
Satin Nickel
RS210FACC716PLY
Accent Lever w/Plymouth Trim
Aged Bronze
• For Schlage F-Series non-keyed sets.
• Includes square and radius corner mortise and drive-in faceplates.
• Adjusts to both 2-3/8” and 2-3/4” backsets.
• 1” x 2-1/4” faceplates, screws included.
Product #
Finish
16-210-605
Polished Brass
16-210-613
Oil Rubbed Bronze
16-210-626
Satin Chrome
F-Series Triple-Option Deadlocking Latch
• For Schlage F-Series keyed sets.
Finish
Polished Brass
What exactly is an ANSI Grade?
16-211-613
Oil Rubbed Bronze
16-211-619
Satin Nickel
The American National Standards Institute (ANSI) is a
private nonprofit that administers voluntary performance
standards for builder’s hardware. The purpose of ANSI
grades is to help identify the quality and durability of
locksets through a series of operational and security tests.
F-Series Deadlocking Latch, 5” Backset
ANSI grades reflect 3 levels of security and durability:
*Grade 2 certification - Higher Residential Security.
Designed to offer excellent security and durability. Used
mostly for residential applications and some light
commercial applications.
Product #
16-211-605
*Grade 1 certification - Highest Grade Security. The strongest grade ANSI recognizes for any residential or commercial product.
DOOR HARDWARE
Schlage RS-Series Interconnect
• For Schlage F-Series Keyed Levers or Knob.
• 1” x 2-1/4” square corner faceplate; screws included.
Product #
Finish
16-126-605
Polished Brass
16-126-613
Oil Rubbed Bronze
16-126-619
Satin Nickel
*Grade 3 certification - Basic Residential Security. The
lowest grade provided by ANSI, and the minimal acceptable quality for residential door locks
TEL
509.535.1663 TOLL-FREE
800.888.1663
363
DOOR HARDWARE
Schlage J-Series Handlesets
B60/B500-Series Triple-Option Deadbolt Latch
J-Series Handleset Exterior - Barcelona
• For Schlage B60/B500-Series Deadbolts.
• Includes square and radius corner mortise and drive-in faceplates
Product #
Finish
12-287-605
Polished Brass
12-287-626
Satin Chrome
12-287-716
Aged Bronze
B60/B560-Series Deadbolt Latch, 5” Backset
• 1-1/8” x 2-1/4” square corner faceplate, screws included.
Product #
Finish
12-633-605
Polished Brass
12-633-613
Oil Rubbed Bronze
12-633-619
Satin Nickel
Schlage J-Series Handleset Features:
• Proven quality at an affordable price.
Specifications:
• Function: JH58 Handleset/Entrance Lock Exterior. Outside Grip and
and Deadbolt Trim. Pair with a JH59 Interior Trim for a complete handleset.
• Warranty: Limited lifetime mechanical and 5-year finish.
• Door Prep: Min. 5” center-to-center between cross bore holes.
Product #
Function
Stock Finishes
JH58-BAR
Single Cylinder
605, 619, 716
J-Series Handleset Interior
Specifications:
• Function: JH59 Handleset/Entrance Lock Interior. Inside trim, deadbolt, thumbturn, latches, screw and strikes.
• Pair with an JH58 for a complete handleset.
364
TEL
509.535.1663 TOLL-FREE
Product #
Style
Stock Finishes
JH59-SEV-LH/RH
Seville Lever
619, 716
JH59-SOL
Solstice Lever
619, 716
JH59-STR
Stratus Knob
605, 619, 716
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
J-Series Stratus
J-Series Solstice
• Limited lifetime mechanical and 5-year finish warranty.
Schlage J-Series (Dexter) Knob & Lever Features:
• Highest residential security for a lever product.
• Specify handing on dummy lever functions.
Specifications:
• Certification: ANSI/BHMA Grade 3; ADA-Compliant.
• Warranty: Limited lifetime mechanical and 5-year finish warranty.
Product #
Function
Stock Finishes
J10-SOL
Passage
619, 716
J40-SOL
Privacy
619, 716
J54-SOL
Keyed Entry
619, 716
J170-SOL
Single Dummy Lever
619, 716
J-Series Seville
Product #
Function
Stock Finishes
J10-STR
Passage
605, 619, 716
J40-STR
Privacy
605, 619, 716
J54-STR
Keyed Entry
605, 619, 716
J170-STR
Single Dummy Knob
605, 619, 716
J-Series Corona
Product #
Function
Stock Finishes
J10-CNA
Passage
605, 619
J40-CNA
Privacy
605, 619
J54-CNA
Keyed Entry
605, 619
J170-CNA
Single Dummy Knob
605, 619
Product #
Function
Stock Finishes
J10-SEV
Passage
619, 716
J40-SEV
Privacy
619, 716
J54-SEV
Keyed Entry
619, 716
J170-SEV-LH/RH
Single Dummy Lever
619, 716
JD-Series Deadbolts
Schlage J-Series Deadbolts
DOOR HARDWARE
Schlage J-Series Knobs and Levers
Specifications:
• Function: JD60 Single Cylinder Deadbolt - Operated with key on exterior and thumb turn on interior trim.
• Warranty: Limited lifetime mechanical and 5-year finish.
TEL
509.535.1663 TOLL-FREE
Product #
Function
Stock Finishes
JD60
Single Cylinder
605, 619, 630, 716
800.888.1663
365
DOOR HARDWARE
Schlage J-Series Parts and Latches
J-Series Dual-Option Spring Latch
Brinks Push-Pull-Rotate Handlesets
Brinks Rourke Keyed Entry Handleset
• For Schlage J-Series (Dexter) non-keyed sets.
• Includes radius corner mortise and drive-in faceplates.
Product #
Finish
16-254-605
Polished Brass
16-254-630
16-254-716
Aged Bronze
New Item!
J-Series Triple-Option Deadlocking Latch
• For Schlage J-Series (Dexter) keyed sets.
Product #
Finish
16-255-605
Polished Brass
16-255-630
16-255-716
Aged Bronze
Specifications:
• Complete Entry Set: includes Rourke exterior handle, Stafford style
interior knob and deadbolt.
• Certification: ANSI Grade 2 Lock
• Warranty: Lifetime warranty for defects in material or workmanship
• Backset: 2-3/8” (60mm) or 2-3/4” (70mm)
• Latch: 1” x 2-1/4” square corner faceplates.
• Keyway: 5 pin, KW1.
Product #
Function
Finish
C23072-119-4
Single Cylinder
Satin Nickel
C23072-150-4
Single Cylinder
Tuscan Bronze
J-Series Triple-Option Deadbolt Latch
ADDITIONAL BRINKS LOCK DESIGNS
AND FINISHES SHOWN ONLINE!
• ForSchlage J-Series (Dexter) deadbolts.
• 1” x 2-1/4” faceplates; screws included.
366
• Push Pull Rotate™ the hands-full door lock from Brinks Home Security.
The only door lock that opens 3 ways. Push it, pull it, or rotate it. With an
elbow, hip or finger you can open the door by simply pushing on the
handleset from the outside or pulling on the knob from the inside. You
can also rotate the knob the traditional way.
Product #
Finish
16-068-605
Polished Brass
16-068-630
16-068-716
Aged Bronze
TEL
509.535.1663 TOLL-FREE
Visit www.thehardwarehut.com
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Brinks Push-Pull-Rotate Knobs
Brinks Alwood Leverset
Brinks Stafford Knobset
New Item!
New Item!
• Push Pull Rotate™ the hands-full door locks from Brinks Home
Security. The only door lock that opens 3 ways. Push it, pull it, or rotate it.
With an elbow, hip or finger you can open the door by simply pushing or
pulling on the knob or lever.
• Hidden screws for improved appearance.
Specifications:
• Certification: ANSI Grade 2 Lock.
• Backset: 2-3/8” (60mm) or 2-3/4” (70mm).
• Strike: Round corner full lip strikes 1-5/8” x 2-1/4”.
Product #
Function
Finish
C23041-119-12
Passage
Satin Nickel
C23041-150-12
Passage
Tuscan Bronze
C23021-119-12
Privacy
Satin Nickel
C23021-150-12
Privacy
Tuscan Bronze
C23001-119-12
Keyed Entry
Satin Nickel
C23001-150-12
Keyed Entry
Tuscan Bronze
Brinks Harper Leverset
Product #
Function
Finish
C23051-119-12
Passage
Satin Nickel
C23051-150-12
Passage
Tuscan Bronze
C23031-119-12
Privacy
Satin Nickel
C23031-150-12
Privacy
Tuscan Bronze
C23012-119-12
Keyed Entry
Satin Nickel
C23012-150-12
Keyed Entry
Tuscan Bronze
509.535.1663 Finish
Satin Nickel
C23052-150-12
Passage
Tuscan Bronze
C23032-119-12
Privacy
Satin Nickel
C23032-150-12
Privacy
Tuscan Bronze
C23013-119-12
Keyed Entry
Satin Nickel
C23013-150-12
Keyed Entry
Tuscan Bronze
Brinks Deadbolts
Brinks Almarrion Deadbolt
New Item!
• Features anti-pry shield for increased security and protection.
• Includes an anti-drill plate, anti-pick and anti-bump spool pins.
Specifications:
• Certification: ANSI Grade 2 Lock
• Door Thickness: 1-3/8in.(35mm) to 1-3/4in.(44mm).
• Backset: 2-3/8” (60mm) or 2-3/4” (70mm).
• Strike: Square corner strike with security subplate.
New Item!
TEL
Function
Passage
TOLL-FREE
Product #
Function
Finish
C23061-119-12
Single Cylinder
Satin Nickel
C23061-150-12
Single Cylinder
Tuscan Bronze
800.888.1663
Brinks Push-Pull-Rotate Levers
Product #
C23052-119-12
367
DOOR HARDWARE
Door Locks - Commercial
A SERIES • Functions
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Non-Keyed Locks
SCHLAGE
ANSI
A10S
F75
A25D
A30D
A40S
A43D
Keyed Locks
Passage Latch
Both knobs always unlocked.
A53PD
F109
Entrance Lock
A70PD
F84
Classroom Lock
Exit Lock
Blank plate outside. Inside knob
always unlocked. Specify door
thickness.
F77
F76
F79
A170
Patio Lock
Push-button locking. Turning inside
knob or closing door releases button,
preventing lock-out.
A79PD
Turn/push-button locking; pushing
and turning button locks outside
knob, requiring use of key until
button is manually unlocked. Pushbutton locking; pushing button locks
outside knob until unlocked by key
or by turning inside knob.
Outside knob locked and
unlocked by key. Inside knob
always unlocked.
Communicating Lock
With Blank Plate
Bath/Bedroom Privacy Lock
Locked or unlocked by key from
outside. Blank plate inside.
Push-button locking. Can be unlocked
from outside with small screwdriver.
Turning inside knob or closing door
releases button.
A80PD
F86
Storeroom Lock
A85PD
F93
Faculty Restroom Lock
(with Indicator Cylinder)
Communicating Lock
Outside knob fixed. Entrance by key
only. Inside knob always unlocked.
Turn-button in outer knob locks and
unlocks knob and inside thumbturn.
only. Push-button in inside knob
activates visual occupancy indicator,
allowing only emergency master key
to operate. Turning inside knob or
closing door releases visual
occupancy indicator. Rotation of
inside spanner-button provides
lock-out feature by keeping indicator
activated.
Single Dummy Trim
Dummy trim for one side of door.
Used for door pull or as matching
inactive trim.
Finishes
368
TEL
605
606
609
612
613
625
626
629
630
643e
Bright
brass
Satin
brass
Antique
brass
Satin
bronze
Oil rubbed
bronze
Bright
chromium
plated
Satin
chromium
plated
Bright
stainless
steel
Satin
stainless
steel
Aged
bronze
509.535.1663 TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
A-Series Georgian
Schlage A-Series - Grade 2 Cylindrical Locks
A-Series Plymouth
Schlage A-Series Knob & Lever Features:
• Medium traffic commercial and heavy-duty residential locks.
• Original A-Series cylindrical chassis with heavy duty spring cages.
Specifications:
• Certification: ANSI/BHMA A156.2, 2011, Series 4000, Grade 2; UL Listed
for 3-hour fire door.
• Warranty: Commercial: three-year limited.
• Backset: 2-3/8” or 2-3/4” backset latch standard. 3-3/4” and 5” backset
links optional.
• Latch: 7/8” housing diameter, 1/2” throw, deadlocking on keyed and
exterior functions.
• Latch Faceplate: 1” x 2-1/4” square corner standard, 1-1/8” x 2-1/4” or
drive-in optional.
• Cylinder: 6 pin, C keyway standard.
Function
Stock Finishes
Passage
605, 612, 626
A25D-PLY
Exit Latch
626
A40S-PLY
Privacy
605, 612, 626
A170-PLY
Single Dummy
605, 626
A53PD-PLY
Entrance
605, 612, 626
A70PD-PLY
Classroom
612, 626
A80PD-PLY
Storeroom
612, 626
Function
Stock Finishes
A10S-GEO
Passage
605, 609
A40S-GEO
Privacy
605, 609
A170-GEO
Single Dummy
605, 609
A53PD-GEO
Entrance
605, 609
A-Series Levon
• ANSI/BHMA Grade 2; ADA Compliant.
• A53PD-ORBXLEV features Orbit Knob exterior trim.
Product #
Function
Stock Finishes
A10S-LEV
Passage
613, 626
A25D-LEV
Exit Latch
626
A40S-LEV
Privacy
613, 626
A53PD-ORBXLEV
Entrance
613, 626
A-Series Orbit
ADDITIONAL SCHLAGE A-SERIES
STYLES, FUNCTIONS AND FINISHES
AVAILABLE BY SPECIAL ORDER.
Product #
A10S-PLY
Product #
Product #
Function
Stock Finishes
A10S-ORB
Passage
605, 613, 626
A40S-ORB
Privacy
605, 613, 626
A170-ORB
Single Dummy
605, 613
A53PD-ORB
Entrance
605, 613, 626
A70PD-ORB
Classroom
613, 626
A80PD-ORB
Storeroom
626
TEL
509.535.1663 TOLL-FREE
CALL US TODAY FOR A QUOTE!
800.888.1663
369
DOOR HARDWARE
AL • Functions
Schlage AL-Series - Grade 2 Cylindrical
Locks
Non-Keyed Locks
Keyed Locks
SCHLAGE
ANSI
SCHLAGE
ANSI
AL10S
F75
Passage Latch
AL50PD
F82
Entrance/Office Lock
Exit Lock
AL53PD
F109
Entrance Lock
AL70PD
F84
Classroom Lock
AL44S
Hospital Privacy Lock
AL80PD
F86
Storeroom Lock
AL170
Single Dummy Trim
AL85PD
F93
Both levers always unlocked.
AL25D
AL40S
Blank plate outside. Inside lever
always unlocked. Specify door
thickness.
F76
Push-button locking. Can be unlocked
from outside with small screwdriver,
not included. Turning inside lever or
closing door releases button.
Push-button locking. Unlocked
from outside by turning emergency
turn-button. Turning inside lever or
closing door releases button.
inactive trim.
RH
Inside
Left hand
Right hand
Inside
LRB
Outside lever fixed. Entrance by key
only. Inside lever always unlocked.
RRB
Left hand
Reverse bevel
TEL
Outside lever locked and unlocked by
key. Inside lever always unlocked.
All Schlage locks are reversible. Hand information is necessary to ensure proper
cylinder orientation in keyed functions, and finish of latchbolt and strike for locks that
are to be installed on reverse bevel doors. Follow the diagram to correctly determine
the hand of the door.
Outside
370
and turning button locks outside lever
requiring use of key until button is
manually unlocked. Push-button
locking; pushing button locks outside
lever until unlocked by key or by
turning inside lever.
only. Push-button in inside lever
allowing only emergency masterkey
to operate. Turning inside lever or
inside spanner-button provides lock-out
feature by keeping indicator
activated.
Door Handing
LH
Push-button locking. Push-button
locks outside lever until unlocked
with key or by rotating inside lever.
Right hand
Reverse bevel
Outside
Finishes
605
606
609
612
613
625
626
629
630
643e
Bright
brass
Satin
brass
Antique
brass
Satin
bronze
Oil rubbed
bronze
Bright
chromium
plated
Satin
chromium
plated
Bright
stainless
steel
Satin
stainless
steel
Aged
bronze
509.535.1663 TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Schlage AL-Series - Grade 2 Cylindrical
Locks
AL-Series Saturn
Schlage AL-Series Lever Features:
• For high traffic commercial applications.
• Designed to deliver ADA compliant accessibility and constant, reliable
performance.
• The AL-Series is best for buildings with medium to high traffic flow, such
as interior office doors, banks, retail spaces and hotel guest areas.
Specifications:
• Certification: ANSI/BHMA A156.2 Series 4000, Grade 2; UL Listed for
3-hour fire door.
• Door Prep: 2-1/8” crossbore with 5/16” thru-bolt holes, 7/8” or 1” edge
bore.
• Backset: 2-3/4” backset latch standard. 2-3/8”, 3-3/4” and 5” optional.
• Latch: 1/2” throw, deadlocking on keyed and exterior functions.
• Latch Faceplate: 1-1/8” x 2-1/4” square corner standard, drive-in optional.
Function
Stock Finishes
Passage
605, 613, 626
AL170-SAT
Single Dummy
605, 613, 626
AL25D-SAT
Exit Latch
613, 626
AL40S-SAT
Privacy
605, 613, 626
AL50PD-SAT
Entrance/Office
605, 613, 626
AL53PD-SAT
Entrance
605, 613, 626
AL70PD-SAT
Classroom
605, 613, 626
AL80PD-SAT
Storeroom
605, 613, 626
Product #
AL10S-SAT
ADDITIONAL SCHLAGE AL-SERIES
AL/ND Series Thru-Bolt Boring Jig
• For through bolts on AL and ND Series Schlage Commercial Door Levers.
Product #
M204-198
TEL
509.535.1663 TOLL-FREE
800.888.1663
371
DOOR HARDWARE
• Functions
D Knobs
Door
Locks - Commercial
Schlage
D-Series
- Grade 1 Cylindrical Locks
Non-Keyed
Locks
SCHLAGE
ANSI
D10S
F75
Keyed Locks
SCHLAGE
ANSI
Passage Latch
Both knobs always unlocked.
D70PD
F84
Classroom Lock
Outside knob locked and unlocked by
key. Inside knob always unlocked.
Exit Lock
Blank plate outside. Inside knob
always unlocked.
D72PD
F80
Communicating Lock
Key in either knob locks or unlocks
each knob independently.
Push-button locking. Can be opened
Turning inside knob or closing door
releases button.
D73PD
F90
Corridor Lock
Locked or unlocked by key from
outside. Push-button locking from
inside. Turning inside knob or closing
door releases button.
D44S
Push-button locking. Unlocked from
outside by turning emergency turn-button. Turning inside knob or closing
door releases button.
D80PD
F86
Storeroom Lock
only. Inside knob always unlocked.
D170
Single Dummy Trim
inactive trim.
D80PDEL
Electrically Locked (Fail Safe)
Outside knob continuously locked
electrically. Unlocked by key outside
or by switch or power failure.
Auxiliary latch deadlocks latchbolt
when door is closed. Inside knob
always free for immediate exit.
D80PDEU
Electrically Unlocked (Fail
Secure)
Outside knob continuously locked
until unlocked by key or electric
current. Auxiliary latch deadlocks
latchbolt when door is closed. Inside
knob always free for immediate exit.
D25D
D40S
F76
Keyed Locks
SCHLAGE
ANSI
D53PD
F109
D60PD
D66PD
F88
F91
Entrance Lock
and turning button locks outside knob,
manually unlocked. Push-button
locking; pushing button locks outside
knob until unlocked by key or by
turning inside knob.
Vestibule/Classroom Security
Lock
Latch retracted by key from outside
when outside knob is locked by key in
inside knob. Inside knob is always
unlocked.
D82PD
F87
Institution Lock
Both knobs fixed. Entrance by key in
either knob.
D85PD
F93
only. Push-button in inside knob
allowing only emergency masterkey
to operate. Turning inside knob or
inside spanner-button provides lockout feature by keeping indicator
thrown.
Store Lock
Key in either knob locks or unlocks
both knobs.
Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
372
TEL
509.535.1663 TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Schlage D-Series - Grade 1 Cylindrical Locks
D-Series Plymouth
Schlage D-Series Knob Features:
• Heavy-duty for high traffic commercial applications.
• Tough, dependable ANSI Grade 1 locks designed for use in military barracks, back-of-house hospitality and retrofit applications
Specifications:
• Certification: ANSI/BHMA A156.2 Series 4000, Grade 1; All locks UL listed
for A label single doors, 4’ x 8’.
• Door Prep: 2-1/8” crossbore, 1” edge bore.
• Door Thickness: 1-3/8” to 2” standard.
• Latch Faceplate: 1-1/8” x 2-1/4” square corner standard, drive-in optional.
Product #
Function
Stock Finishes
Passage
626
Exit Latch
626
D40S-PLY
Privacy
626
D53PD-PLY
Entrance
626
D60PD-PLY
Vestibule
626
D66PD-PLY
Store
626
D70PD-PLY
Classroom
626
D80PD-PLY
Storeroom
626
TEL
509.535.1663 CALL US TODAY FOR A QUOTE!
D10S-PLY
D25D-PLY
ADDITIONAL SCHLAGE D-SERIES
TOLL-FREE
800.888.1663
373
DOOR HARDWARE
ND Levers
Functions
Door •Locks
- Commercial
Schlage
ND-Series - Grade 1 Cylindrical
Non-Keyed Locks
Locks
SCHLAGE
ANSI
SCHLAGE
ANSI
F82
locks outside lever until unlocked with
key or by turning inside lever. Inside lever
is always free for immediate egress.
ND10S
F75
Passage Latch
Both levers always unlocked.
Inside lever is always free for
immediate egress. Also available with
Request to Exit (RX) function.
ND50PD
ND12D
F89
Exit Lock
Outside lever always fixed. Inside
lever always unlocked for immediate
egress. Also available with Request to
Exit (RX) function.
ND53PD
F109
Entrance Lock
Turn/push-button locking; pushing and turning button locks outside lever, requiring use of
key until button is manually unlocked. Pushbutton locking; pushing button locks outside
lever until unlocked by key or by turning inside
lever. Inside lever is always free for immediate
egress.
ND60PD
F88
Vestibule Lock
Latch retracted by key from outside
when outside lever is locked by key in
inside lever. Inside lever always unlocked
for immediate egress.
ND66PD
F91
Store Lock
Key in either lever locks or unlocks
both levers.
ND70PD
F84
Classroom Lock
Outside lever locked and unlocked by
key. Inside lever always unlocked for
immediate egress.
ND73PD
F90
Corridor Lock
Locked or unlocked by key from outside.
Push-button locking from inside. Turning
inside lever or closing door releases button.
When outside lever is locked by key it can
only be unlocked by key. Inside lever always
unlocked for immediate egress.
ND75PD
F110
Classroom Security Lock
Key in either lever locks or unlocks
outside lever. Inside lever always
Outside lever continuously locked
electrically. Unlocked by switch or power
failure. Auxiliary latch deadlocks latchbolt
when door is closed. Inside lever always
always unlocked for immediate egress.
Also available with Request to Exit (RX)
function.
ND12DEL
Electrically Unlocked (Fail Secure)
until unlocked by electric current.
when door is closed. Inside lever always
unlocked for immediate egress. Also available with Request to Exit (RX) function.
ND12DEU
374
Keyed Locks
ND25D
F89
Exit Lock
Blank plate outside. Inside lever
ND40S
F76
Push-button locking. Can be opened
Turning inside lever or closing door
releases button. Inside lever is always
free for immediate egress.
ND44S
Push-button locking. Unlocked
from outside by turning emergency
turn-button. Turning inside lever or
closing door releases button. Inside lever
is always free for immediate egress.
ND170
Single Dummy Trim
inactive trim.
TEL
509.535.1663 TOLL-FREE
Safe School Locks
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade Vandlgard Functions: Designed to disengage outside spindle
from latch when in locked condition.
1, UL Listed for 3-hour fire door.
immediate egress.
Keyed Locks
SCHLAGE
ANSI
ND80PD
F86
electrically. Unlocked by key outside
or by switch or power failure.
when door is closed. Inside lever
Also available with Request to Exit
(RX) function.
ND80PDEL
Electrically Unlocked (Fail Secure)
until unlocked by key or electric
current. Auxiliary latch deadlocks
latchbolt when door is closed. Inside
lever always unlocked for immediate
egress. Also available with Request to
Exit (RX) function.
ND80PDEU
ND82PD
F87
F93
ANSI
ND91PD
F82
disengages outside lever until unlocked
with key or by turning inside lever.
ND92PD
F109
Entrance Lock
Turn/push-button locking; pushing and
turning button disengages outside lever,
manually unlocked. Push-button locking;
pushing button disengages outside lever
until unlocked by key or by turning
inside lever.
ND93PD
F88
Vestibule Lock
Latch retracted by key from outside when
outside lever is disengaged by key in inside
lever. Inside lever is always unlocked for
immediate egress.
ND94PD
F84
Classroom Lock
Outside lever disengaged and unlocked
by key. Inside lever always unlocked for
immediate egress.
ND95PD
F110
Classroom Security Lock
Key in either lever disengages or
unlocks outside lever. Inside lever always
ND96PD
F86
Storeroom Lock
Outside lever always disengaged.
Entrance by key only. Inside lever always
unlocked for immediate egress. Also available with Request to Exit (RX).
Institution Lock
Both levers fixed. Entrance by key in
either lever.
only. Push-button in inside lever activates visual “occupancy” indicator,
allowing only emergency master key
to operate. Turning inside lever or
closing door releases visual occupancy
indicator. Rotation of inside spinner-button by spanner key provides
lock-out feature by keeping indicator
thrown. Inside lever is always free for
immediate egress.
Safe School Locks
ND96PDEL
ND96PDEU
ND97PD
TEL
509.535.1663 TOLL-FREE
800.888.1663
F90
Outside lever continuously
disengaged electrically. Unlocked by
key outside or by switch or power failure.
Auxiliary latch deadlocks latchbolt when
door is closed. Inside lever always free for
Request to Exit (RX).
Electrically Unlocked
(Fail Secure)
Outside lever continuously disengaged
until unlocked by key or electric current.
Auxiliary latch deadlocks latchbolt when
door is closed. Inside lever always free for
Request to Exit (RX).
Corridor Lock
Locked or unlocked by key from outside.
Push-button locking from inside. Turning
inside lever or closing door releases
button. When outside lever is locked by
key it can only be unlocked by key. Inside
lever is always unlocked for immediate
egress.
ND85PD
Storeroom Lock
Outside lever fixed. Entrance by key only.
Inside lever always unlocked for
Request to Exit (RX) function.
SCHLAGE
DOOR HARDWARE
Functions • ND Levers
375
DOOR HARDWARE
ND Levers • Functions
Specialty Functions
Pricing for all Speciality functions can be found on ND-10
Non-Keyed Locks
SCHLAGE
ANSI
ND30D
F77
Patio Lock
Push button locking. Turning inside
lever or closing door releases button,
preventing a lock-out. Inside lever
Specify per XN12-007.
ND45
Time Out Lock
Caretaker Side
Pushing and holding button will lock
inside lever (detention side) until
released. Lever always retracts latch.
Detention Side
Lever retracts latch unless outside
button is depressed. Vandlgard allows
inside spindle to disengage from latch
when locked.
ND25 x 80PD
Storeroom Exit Lock
Blank plate outside. Key in fixed inside lever
retracts latch. Specify per XN12-005.
ND70 x 80PD
Classroom by Storeroom Lock
Key locks and unlocks outside lever.
Key in fixed inside lever retracts latch.
ND25 x 70PD
Classroom Exit Lock
Blank plate outside. Key locks or unlocks
inside lever. Specify per XN12-004.
ND72PD
Communicating Lock
Key in either lever locks and unlocks
own lever. Specify per XN12-002.
ND60PD
Vestibule with Closed Outside Lever
Same as ND60 except outside lever is closed.
Inside lever always unlocked for immediate
egress. Specify per XN12-001.
Keyed Locks
SCHLAGE
ANSI
Door Handing
Keyed Locks
SCHLAGE
F80
LH
ANSI
Vandlgard Functions:
Left hand
Designed to disengage outside spindle
from latch when in locked condition.
immediate egress.
Inside
Outside
Inside
LRB
ND72PD
376
TEL
509.535.1663 Vandlgard Communicating Lock
Communicating, ND72, lock with
Vandlgard. Key in either lever locks
and unlocks own lever. Both inside
and outside levers are clutching.
TOLL-FREE
RH
Right hand
Left hand
Reverse bevel
RRB
Outside
Right hand
Reverse bevel
All Schlage locks are reversible. Hand information is necessary
to ensure proper cylinder orientation in keyed functions, and
finish of latchbolt and strike for locks that are to be installed on
reverse bevel doors. Follow the diagram to correctly determine
the hand of the door.
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Schlage ND-Series - Grade 1 Cylindrical
Locks
ND-Series Rhodes
Schlage ND-Series Lever Features:
• Heavy-duty for high traffic commercial applications; ADA Compliant.
• Toughest Grade 1 cylindrical lock - ideal for use in schools, hospitals, offices, retail spaces, colleges, universities and other applications.
Specifications:
• Certification: ANSI/BHMA A156.2 Series 4000, Grade 1; All locks UL listed
for A label single doors, 4’ x 8’. Letter F and UL symbol.
• Warranty: 10-year limited.
• Door Prep: 2-1/8” crossbore, 5/16” thru-bolt holes, 1” edge bore.
• Latch Faceplate: 1-1/8” x 2-1/4” square corner standard.
Product #
Function
Stock Finishes
Passage
626
Exit
626
ND40S-RHO
Privacy
626
ND50PD-RHO
Entrance/Office
626
ND53PD-RHO
Entrance
626
ND60PD-RHO
Vestibule
626
ND66PD-RHO
Store
626
ND70PD-RHO
Classroom
626
ND73PD-RHO
Corridor
626
ND80PD-RHO
Storeroom
626
ND82PD-RHO
Institution
626
ND10S-RHO
ND25D-RHO
ADDITIONAL SCHLAGE ND-SERIES
Schlage AL/ND Series Thru-Bolt Boring Jig
• For through bolts on AL and ND Series Schlage Commercial Door Levers.
Product #
M204-198
TEL
509.535.1663 TOLL-FREE
800.888.1663
377
DOOR HARDWARE
Schlage B500-Series Grade 2 Deadbolts
Schlage B600-Series Grade 1 Deadbolts
B600-Series Commercial Deadbolts
B500-Series Commercial Deadbolts
B500-Series Deadbolt Features:
• Versatile and economical Grade 2 deadbolt for medium duty commercial
and heavy duty residential applications.
• ADA compliant thumbturn.
Specifications:
• Function: B560 Single Cylinder Deadbolt - Deadbolt thrown or retracted by key outside or thumbturn inside.
• Function: B562 Double Cylinder Deadbolt - Deadbolt thrown or
retracted by key on either side.
• Function: B580 Door Bolt - Deadbolt thrown or retracted by trim unit
only. No exterior trim. Requires 1-1/2” cross bore prep.
• Certification: ANSI/BHMA A156.5 Grade 2.
• Warranty: three-year limited.
• Backset: Adjustable 2-3/8” or 2-3/4” backset latch.
• Deadbolt: 1” throw, with saw-resistant hardened steel insert.
• Latch Faceplate: 1-1/8” x 2-1/4” square corner.
Product #
Function
Stock Finishes
B560P
Single Cylinder
605, 609, 612, 613, 625, 626
B562P
Double Cylinder
605, 609, 613, 626
B580
Thumbturn Only
605, 626
B571-Series Indicator Deadbolt
Product #
Function
Stock Finishes
B571
Occupancy Indicator
626, 716
61-509
Emergency Key
509.535.1663 Product #
Function
Stock Finishes
B660P
Single Cylinder
605, 626
B662P
Double Cylinder
605, 626
B250-Series Deadlatch
• ADA compliant thumbturn, ideal for use in commercial restrooms or
dressing rooms.
• Includes one emergency key.
TEL
Specifications:
• Function: B660 Single Cylinder Deadbolt - Deadbolt thrown or retracted by key outside or thumbturn inside.
• Function: B662 Double cylinder deadbolt - Deadbolt thrown or
retracted by key on either side.
• Certification: ANSI/BHMA A156.5 Grade 1. UL10B listed for A label single
doors, 4’ x 8’. Letter F and UL symbol.
• Backset: 2-3/4” backset latch standard; 2-3/8”, 3-3/4” and 5” optional.
• Deadbolt: 1” throw, with saw-resistant hardened steel insert.
Schlage B250-Series Grade 2 Deadlatch
Specifications:
• Function: B571 Indicator Deadbolt - Deadbolt thrown or retracted by
key outside or thumbturn inside. Outside indicator displays “IN USE” in
red OR “VACANT” in green.
• Certification: ANSI/BHMA A156.5 Grade 2.
• Door Prep: Fits 1-1/2” crossbore, not UL rated.
378
• Schlage’s toughest heavy-duty Grade 1 deadbolts for use in high-traffic
commercial applications.
TOLL-FREE
B250-Series Deadlatch Features:
• The industry standard for decades the B250 is ideal for pool, apartment
and condominium gates, utility panels, etc.
• 9/16” throw deadlatch resists pry-in attacks and “shimming” of the latch
Specifications:
• Function: B250 Single Cylinder Deadlatch - Deadlatch retracted by
key outside or thumbturn inside. Hold-back feature standard, retains the
deadlatch in a retracted position when desired.
• Certification: ANSI A156.5.
• Door Prep: Fits 1-1/2” crossbore.
• Backset: 2-3/8” standard. 2-3/4” optional.
• Latch: 9/16” throw.
Product #
Function
Stock Finishes
B250PD
Single Cylinder
605, 626
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Schlage A-Series Drive-In Spring Latch
Schlage A-Series Mortise Spring Latch
• For Schlage A-Series Passage and Privacy knobs or levers.
• For Schlage A-Series Passage and Privacy knobs or levers.
• 11-068: 1” x 2-1/4” square corner faceplate.
• 11-116: 1-1/8” x 2-1/4” square corner faceplate.
• Screws NOT included.
Product #
Backset
Finish
11-068-605
2-3/8”
Polished Brass
11-068-612
2-3/8”
Satin Bronze
11-068-613
2-3/8”
Oil Rubbed Bronze
11-068-626
2-3/8”
Satin Chrome
11-116-605
2-3/4”
Polished Brass
11-116-612
2-3/4”
Satin Bronze
11-116-613
2-3/4”
Oil Rubbed Bronze
11-116-626
2-3/4”
Satin Chrome
Schlage A-Series Mortise Deadlocking Latch
Product #
Backset
Finish
11-110-605
2-3/8”
Polished Brass
11-110-626
2-3/8”
Satin Chrome
11-113-605
2-3/4”
Polished Brass
11-113-626
2-3/4”
Satin Chrome
Schlage A-Series Drive-In Deadlocking Latch
• For Schlage A-Series Keyed knobs or levers.
Product #
Backset
Finish
11-104-605
2-3/8”
Polished Brass
11-104-626
2-3/8”
Satin Chrome
11-105-605
2-3/4”
Polished Brass
11-105-626
2-3/4”
Satin Chrome
Product #
Backset
Finish
11-085-605
2-3/8”
Polished Brass
11-085-612
2-3/8”
Satin Bronze
11-085-613
2-3/8”
Oil Rubbed Bronze
11-085-626
2-3/8”
Satin Chrome
11-096-605
2-3/4”
Polished Brass
11-096-612
2-3/4”
Satin Bronze
11-096-613
2-3/4”
Oil Rubbed Bronze
11-096-626
2-3/4”
Satin Chrome
• Use with a Schlage A-Series 2-3/8” backset latch (sold separately) for a
total of a 5” backset.
Product #
Schlage A-Series 5” Backset Link
• For Schlage A Series Keyed knobs or levers.
• 11-085: 1” x 2-1/4” square corner faceplate.
• 11-096: 1-1/8” x 2-1/4” square corner faceplate.
DOOR HARDWARE
Schlage Commercial Parts and Latches
41-005
Schlage Adapter for 1-1/8” Latch Faceplate
• Fits under the latch faceplate and fills the gap on the sides of the 1” faceplates when used on a 1-1/8” wide door prep.
Product #
A501-878
TEL
509.535.1663 TOLL-FREE
800.888.1663
379
DOOR HARDWARE
Schlage D-Series Mortise Spring Latch
Schlage B60/B560-Series Deadbolt Latch, 5”
Backset
• For Schlage D-Series Passage and Privacy knobs.
• 1-1/8” x 2-1/4” square corner faceplate.
Product #
Backset
Finish
Product #
Finish
14-001-626
2-3/4”
Satin Chrome
12-633-605
Polished Brass
12-633-613
Oil Rubbed Bronze
12-633-619
Satin Nickel
Schlage D-Series Mortise Deadlocking Latch
Schlage B600-Series Mortise Deadbolt Latch
• For Schlage D-Series Keyed knobs.
• For Schlage B600-Series Single and Double Cylinder Deadbolts.
Product #
Backset
Finish
14-047-626
2-3/8”
Satin Chrome
Product #
Backset
Finish
14-019-626
2-3/4”
Satin Chrome
12-630-605
2-3/8”
Polished Brass
12-630-626
2-3/8”
Satin Chrome
12-631-605
2-3/4”
Polished Brass
12-631-626
2-3/4”
Satin Chrome
Schlage B60/B500-Series Deadbolt Latch, TripleOption
Schlage B600-Series Drive-In Deadbolt Latch
• Schlage Triple-Option Deadbolt Latch includes square and radius corner
mortise and drive-in faceplates for Schlage B60/B500-Series Deadbolts.
• 1” x 2-1/4” faceplates.
Product #
Finish
12-287-605
Polished Brass
12-287-626
Satin Chrome
12-287-716
Aged Bronze
• For Schlage B600-Series Single and Double Cylinder Deadbolts.
Product #
Description
Finish
12-640-626
2-3/8”
Satin Chrome
12-641-626
2-3/4”
Satin Chrome
Schlage B250-Series Mortise Deadlocking Latch
• For Schlage B250-Series Deadlatch.
380
TEL
509.535.1663 TOLL-FREE
Product #
Backset
Finish
12-103-605
2-3/4”
Polished Brass
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Marks 175 Series - Grade 2 Cylindrical Locks
Marks Mortise Privacy Latch
175 Series Marks
Marks Economy 175 Series Lever Features:
• Unique “clutch” mechanism radically reduces the wear due to abuse.
Specifications:
• Certification: ANSI-A156.2 Grade 2 Plus, UL Listed 3Hr. Fire Rating.
• Warranty: Lifetime limited mechanical.
• Door Prep: 2-1/8” crossbore with 5/16” thru-bolt holes.
• Door Thickness: 1-5/8” to 1-7/8” standard. (For 1-3/8” door use K1704
spacer, sold separately)
• Backset: 2-3/4” backset latch standard. 2-3/8” optional.
Product #
Function
Stock Finishes
175N26D
Passage
26D
175L26D
Privacy
26D
175AB26D
Entrance
26D
175F26D
Storeroom
26D
175S26D
Classroom
26D
K1704-26D
Satin Chrome
Backset
Finish
1134L-32D
2-3/4”(70mm)
1138L-32D
2-3/8”(60mm)
Marks Mortise Deadlocking Latch
Marks Mortise Passage Latch
Product #
Backset
Finish
1134A-32D
2-3/4”(70mm)
1138A-32D
2-3/8”(60mm)
Marks USA has made compliance with the
Buy American Act (BAA) and American Recovery
& Reinvestment Act (ARRA) easy. Marks USA is
an American manufacturer of quality door hardware products with manufacturing facilities in
Amityville, NY. Marks USA is an American brand
trusted throughout the door hardware industry.
• For use when installing Marks 175 Series locks on 1-3/8” thick doors.
• Comes as a set, one for each side of door.
• 1 pr/box. Sold per pair.
Finish
Product #
• For Marks keyed cylindrical grade 2 leversets.
Spacer Rings for 1-3/8” Thick Door
Product #
• For Marks privacy cylindrical grade 2 leversets.
• For Marks passage cylindrical grade 2 leversets.
Product #
Backset
Finish
1134N-32D
2-3/4” (70mm)
1138N-32D
2-3/8”(60mm)
TEL
509.535.1663 TOLL-FREE
800.888.1663
381
DOOR HARDWARE
Townsteel CDC-Series - Grade 1 Cylindrical
Locks
Townsteel CDC Series Sentinal
Townsteel XCE-2000-Series - Grade 1
Electronic Cylindrical Locks
XCE-2000 Series Electronic Lockset with Keypad
Townsteel CDC Series Features:
• Buy American Act (BAA) Compliant; ADA Compliant.
• Ideal for Institutional, government/military, retail and multi-family.
• Features a clutched trims and independent torsion spring design to
provide effective lever support.
Specifications:
• Certification: ANSI/BHMA A156.2-2011 Grade 1 certified and UL 10C
3-Hour rated.
• Warranty: 10-year limited mechanical, five-year finish.
• Door Prep: 2-1/8” crossbore with 5/16” thru-bolt holes.
• Backset: 2-3/4” backset latch standard. 2-3/8” optional.
382
Product #
Function
Stock Finishes
CDC-109-S-26D
Keyed Entry
26D
CDC-75-S-26D
Passage
26D
CDC-76-S-26D
Privacy
26D
CDC-86-S-26D
Storeroom
26D
CDC-90-S-26D
Corridor
26D
CDC-84-S-26D
Classroom
26D
TEL
509.535.1663 TOLL-FREE
Townsteel XCE-2000 Series Features:
• Provides keypad technology integrated with and ANSI Grade 1 heavy
duty cylindrical lockset for greater security.
• Two remote control terminals; one for a fire alarm system and the other
for remote release by push button.
• Quick and easy to program; Multi-Color LED and sound.
• Buy American Act (BAA) Compliant; ADA Compliant.
Specifications:
• Function: Digital keypad lock with mechanical key override.
• Applications: Interior or exterior.
• Certification: ANSl/BHMAA156.2-2011 Series4000 Grade 1 and UL 1 OC
3-Hour rated.
• Warranty: 10-year limited mechanical, 5-year finish.
• Door Prep: 2-1/8” crossbore with 3/8” thru-bolt holes, 1” edge bore.
• Maximum code capacity per lock: 1 master code, 10 manager codes,
90 user codes and 5 service codes.
• Backset: 2-3/4” (70mm) stainless steel mortise latch standard. 1/2” throw.
• Latch faceplate: 1-1/8” x 2-1/4” square corner.
• Strike: ASA Strike standard (1-1/4” x 4-7/8” x 1-5/16” lip to center).
• Cylinder: 6 pin solid brass cylinder, Schlage “C” keyway.
• Handing: Handed, easy field reversible.
• Power Supply: 4AA Battery. Up to 2 year battery life.
Product #
Finish
XCE2020-26D
Satin Chrome
XCE2020-10B
Oil Rubbed Bronze
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
5000 Series Heavy Duty Mechanical Lockset
Ideal for controlling access to high-traffic, security sensitive areas on commercial, industrial, educational, governmental and multi-unit residential
settings. Perfect for locations with high turnover rates.
Features:
• Clutch free design—minimizes friction and wear.
• Extra heavy-duty cylindrical lock; solid cast housings, solid cast zinc
levers, stainless steel cylindrical drive components.
• Vandal resistant, metal pushbuttons.
Product #
Finish
5021XKWL-26D-41
Satin Chrome
TEL
509.535.1663 TOLL-FREE
E-Plex 2000 Series Electronic Push-Button
Lockset
Features:
• Light-duty commercial cylindrical lockset, solid cast exterior housing,
solid cast levers, for use on indoor and outdoor applications.
• Vandal resistant, solid metal pushbuttons
• Requires no wiring to or through the door, no risk of pinched wires.
• Batteries located in interior housing cover for quick replacement, lock
data saved if batteries fail.
Specifications:
• Function: Key in lever cylinder, key override function
• Certification: Certifications ADA approved; UL 10C Fire Rated.
• Door Prep: 2-1/8” crossbore and 3 additional thru-bolt holes.
• Codes: 100 access codes per door. Easily programmed via keypad
• Latch/Backset: 2-3/4” standard. 1/2” throw.
• Latch Faceplate: 1-1/8” x 2-1/4”.
• Cylinder: 6pin, Schlage C keyway.
• Handing: non-handed (field reversible).
Product #
Finish
E2031-XS-LL-626-41
Satin Chrome
800.888.1663
Specifications:
• Function: Fully mechanical push-button access control. Exterior access
by combination or key override. Egress is by interior lever and is free at all
times.
• Codes: Single access code—one easy to manage code for all users.
• Certification: ANSI/BHMA A156.2, Grade 1 Certified. 3-hour UL/ULC fire
rating for “A” label doors.
• Warranty: 3 year limited.
• Door Prep: Fits standard 2-1/8” crossbore with through bolt holes.
• Handing: Non-handed (field reversible).
• Latch/Backset: 2-3/4” backset latch standard, 1/2” throw.
• Latch Faceplate: 1-1/8” x 2-1/4”.
• Cylinder: 6 pin, Kaba keyway.
Kaba E-Plex Electronic Locks
DOOR HARDWARE
Kaba Simplex 5000 Series Mechanical
Push-Button Locks
383
DOOR HARDWARE
Kaba E-Plex Electronic Locks
Lock Parts and Cylinders
E-Plex 5000 Series Heavy-Duty Electronic
Push-Button Lockset
1-1/8” Mortise Cylinder
• C Keyway with Adams Rite cam. Includes 3/8” blocking ring and 2 keys.
• Includes set screw pack B220-050 for Adams Rite locks.
• For Exit Devices or Mortise Locks.
Features:
• Extra heavy-duty primary commercial cylindrical lockset, solid cast exterior housing, solid cast levers, for use on indoor and outdoor applications.
• Vandal resistant, solid metal pushbuttons
• Requires no wiring to or through the door, no risk of pinched wires.
• Batteries located in interior housing cover for quick replacement, lock
data saved if batteries fail.
Specifications:
• Function: Key in lever cylinder, key override function.
• Certification: ANSI/BHMA A156.25, Grade 1; ADA approved; Three-hour
UL/ULC Fire Rated.
• Door Prep: 2-1/8” crossbore and 2 thru-bolt holes.
• Codes: Multiple Users - 100 codes (300 codes with optional software).
• Latch/Backset: 2-3/4” backset, 1/2” throw.
• Cylinder: 6pin, Schlage C keyway.
• Handing: Non-handed (field reversible).
Product #
Finish
E5031-XS-WL-626-41
Satin Chrome
Product #
Finish
20-013-605
Polished Brass
20-013-613
Oil Rubbed Bronze
20-013-626
Satin Chrome
1-1/4” Mortise Cylinder
• C Keyway with standard cam. Includes 3/8” blocking ring and 2 keys.
• For Exit Devices or Mortise Locks
Product #
Finish
20-001-626-1-1/4
Satin Chrome
Mortise Cylinders
• Schlage C Keyway, 5 pin cylinder.
• Standard AdamsRite cam.
• Includes .31” mortise collar with spring washer and 2 keys.
Product #
384
TEL
509.535.1663 TOLL-FREE
Size
Finish
SH-M114-SC-10B-STA2
1-1/4”
Oil Rubbed Bronze
SH-M114-SC-26D-STA2
1-1/4”
Satin Chrome
SH-M118-SC-10B-STA2
1-1/8”
Oil Rubbed Bronze
SH-M118-SC-26D-STA2
1-1/8”
Satin Chrome
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Large Format IC Mortise Cylinder Housing
• Blocking Ring Length: 3/8”.
• For use with mortise cylinder without compression ring.
Product #
Finish
36-079-037-626
Satin Chrome
• Housing only, less IC core.
• Includes K510-711 Adams Rite cam.
1-1/8” Rim Cylinder
Product #
Finish
20-060-626
Satin Chrome
DOOR HARDWARE
3/8” Blocking Ring
• Includes K510-730 straight cam for exit devices.
• Furnished with compression ring and spring, and blocking ring.
• Rim cylinder for use with various exit devices or night latches.
• Schlage C Keyway, 5 pin cylinder.
• Tail piece converts between horizontal and vertical positions.
• Includes collar and standard 2.44” break-off tailpiece.
Product #
Finish
R118-SC-10B-A2
Oil Rubbed Bronze
R118-SC-26D-A2
Satin Chrome
Product #
Finish
26-064-626
Satin Chrome
1-1/8” Rim Cylinder
Product #
Finish
20-022-605
Polished Brass
20-022-612
Satin Bronze
20-022-613
Oil Rubbed Bronze
20-022-626
Satin Chrome
Product #
Finish
SH-ICS-26D-ST
Satin Chrome
Small Format IC Mortise Cylinder Housing
• #2 Bar Rim Cylinder for use with various exit devices or night latches.
• Horizontal Tail Piece
• Large format housing only, less IC core.
• Includes .31” mortise collar with spring washer and Yale Cam.
• 7-pin length.
Large Format Interchangeable Core Cylinder
• Includes K510-730 straight cam for exit devices.
• Furnished with compression ring and collar, spring and 1/4” blocking
ring.
• Large Format Interchangeable Core Cylinder for Schlage Locksets.
• Conventional core only.
Product #
Finish
23-030-626
Satin Chrome
TEL
509.535.1663 TOLL-FREE
Product #
Finish
80-102-626
Satin Chrome
800.888.1663
385
DOOR HARDWARE
Small Format IC Mortise Cylinder Housing
• Small format housing only, less IC core.
• 7-pin length.
• Tail Piece converts between horizontal and vertical positions.
• Small Format Mortise IC Housing only, less core.
• Straight cam.
• 7-pin length.
Product #
Small Format IC Rim Cylinder Housing
Finish
Cam Type
SH-ICM7-26D-AR
Satin Chrome
AdamsRite
SH-ICM7-26D-SL
Satin Chrome
Schlage
Product #
Finish
ICR7-10B
Oil Rubbed Bronze
ICR7-26D
Satin Chrome
Large Format IC Rim Cylinder Housing
• Horizontal Tail Piece.
Product #
Finish
20-079-626
Satin Chrome
Large Format IC Rim Cylinder Housing
• Tail piece converts between horizontal and vertical positions.
• 7-pin length.
Product #
Finish
ICSR-10B
Oil Rubbed Bronze
ICSR-26D
Satin Chrome
Small Format IC Rim Cylinder Housing
• Small format housing only, less IC core.
• Horizontal Tail Piece.
386
Product #
Finish
80-129-626
Satin Chrome
TEL
509.535.1663 TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Keying Kit
Schlage/Dexter Key Blanks
• Set Includes: top and bottom pins, springs, cylinder caps, cap pins, key
gauge, cylinder plug follower in a molded polymer case.
• 1 set/box. Sold per set.
• Nickel with a brass finish.
Product #
Product #
Keyway
Description
J750-061
C Keyway
5 Pin
40-134
Master Keying Pins
Schlage Key Blanks
• For Schlage C Keyway.
• Packaged in a bag of 100.
• 100 bag/box. Sold per bag.
• Nickel with a brass finish.
Description
Keyway
Description
34-202
#2 Master Pin
35-100-C
C Keyway
5 Pin
34-203
#3 Master Pin
35-100-E
E Keyway
5 Pin
34-204
#4 Master Pin
35-101-C
C Keyway
6 Pin
34-205
#5 Master Pin
35-101-E
E Keyway
6 Pin
34-206
#6 Master Pin
35-101-F
F Keyway
6 Pin
34-207
#7 Master Pin
34-208
#8 Master Pin
34-209
#9 Master Pin
Emergency Key
B571 Indicator Deadbolts
Bottom Keying Pins
• Emergency Key for use with Schlage B571 Indicator Deadbolts(sold
separately).
Product #
Finish
61-509
Brass
509.535.1663 TOLL-FREE
• For Schlage C Keyway.
• Packaged in a bag of 100.
• 100 bag/box. Sold per bag.
Product #
Description
34-300
#0 Bottom Pin
34-301
#1 Bottom Pin
34-302
#2 Bottom Pin
34-303
#3 Bottom Pin
34-304
#4 Bottom Pin
34-305
#5 Bottom Pin
34-306
#6 Bottom Pin
34-307
#7 Bottom Pin
34-308
#8 Bottom Pin
34-309
#9 Bottom Pin
800.888.1663
Key Blanks/Keying Accessories
Product #
Product #
TEL
DOOR HARDWARE
Key Blanks/Keying Accessories
387
DOOR HARDWARE
Door Lock Filler/Strike Plates and Protectors
T-Strike Plates
Full Lip Strike Plates - Square Corner
• T-Strike.
• Full lip strike plate with square corners.
Product #
Finish
10-026-605
Polished Brass
10-026-609
Antique Brass
10-026-613
Oil Rubbed Bronze
10-026-619
Satin Nickel
10-026-620
Antique Pewter
10-026-626
Satin Chrome
Product #
Finish
10-001-626
Satin Chrome
10-001-605
Polished Brass
Extended Lip Strike Plates - Square Corner
Full Lip Strike Plates - Radius Corner
• Width measured from center of screw hole to end of lip.
Product #
Width
Finish
SPE200U10B
1-1/2”
Oil Rubbed Bronze
SPE225U10B
1-3/4”
Oil Rubbed Bronze
SPE250U10B
2”
Oil Rubbed Bronze
Extended Lip Strike Plates - Square Corner
• Full lip strike with 1/4” radius corners.
Product #
Finish
10-027-605
Polished Brass
10-027-609
Antique Brass
10-027-612
Satin Bronze
10-027-613
Oil Rubbed Bronze
10-027-619
Satin Nickel
10-027-620
Antique Pewter
10-027-626
Satin Chrome
• Width measured from center of screw hole to end of lip.
Full Lip Strike Plates - Radius Corner
Product #
Width
Finish
9115-605
1-1/2”
Polished Brass
9115-630
1-1/2”
9175-605
1-3/4”
Polished Brass
9175-630
1-3/4”
9102-605
2”
Polished Brass
9102-630
2”
9103-605
3”
Polished Brass
9103-630
3”
• Full lip strike with 1/4” radius corners.
388
Product #
Finish
10-102-630
Stainless Steel
10-102-716
Aged Bronze
TEL
509.535.1663 TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Deadbolt Strike Plate - Radius Corner
• Width is measured from the center of the screw holes to the end of the
lip.
• 2-3/4”H x 1-1/8” W Radius Corner Deadbolt Strike.
Product #
Product #
Finish
10-116-619
Stainless Steel
10-116-716
Aged Bronze
Width
Finish
9115-630-RC
1-1/2”
9115-DU-RC
1-1/2”
Duro Bronze
9175-630-RC
1-3/4”
9175-DU-RC
1-3/4”
Duro Bronze
DOOR HARDWARE
Extended Lip Strike Plates - Radius Corner
Thimble Strike
B-Series
Deadbolt Strike Plate - Radius Corner
• Schlage B-Series circular, drive-in thimble strike.
Finish
• 2-1/4” x 1” Radius Corner Deadbolt Strike Plate.
Satin Chrome
Product #
Finish
A.S.A. Universal Strike Plates
10-103-630
Stainless Steel
10-103-716
Aged Bronze
Deadbolt Strike Plate - Square Corner
• For jambs prepared for universal strike in accordance with A.S.A. Standard
A115.2.
• 2-3/4” x 1-1/8” Square Corner Deadbolt Strike Plate.
Product #
Finish
3935-US3
Polished Brass
Product #
Finish
3935-US10B
Oil Rubbed Bronze
10-094-605
Polished Brass
3935-US26D
Brushed Chrome
10-094-613
Oil Rubbed Bronze
10-094-626
Satin Chrome
TEL
509.535.1663 TOLL-FREE
800.888.1663
Product #
10-064-626
389
DOOR HARDWARE
Security Strike Plate
Dual Security Strike
• For locks with 5-1/2” to 6” centers.
• Replaces standard latch & deadbolt strikes with one piece security.
• Strengthens or repairs wood jambs.
• 3” screws attach to wall stud for extra security.
• For 1-3/4” or thicker doors.
• Replaces most deadbolt strikes for increased security.
• 3” screws to attach to wall stud.
Product #
Finish
1010-SN
Satin Nickel
1010-VB
Dark Bronze
Finish
Polished Brass
Wrap-Around Door Reinforcers
Security Strike Plate
390
Product #
1027
• Replaces most deadbolt strikes for increased security.
• Strengthens or repairs wood jambs
• 3” screws to attach to wall stud.
• Helps prevent forced entry and installs in minutes.
• Includes all mounting hardware.
Product #
Finish
1012
Polished Brass
1012-SN
Satin Nickel
Product #
Backset
Door Thickness
Finish
1012-VB
Dark Bronze
1-PB-CW
2-3/8”
1-3/8”
Polished Brass
2-PB-CW
2-3/8”
1-3/4”
Polished Brass
3-PB-CW
2-3/4”
1-3/8”
Polished Brass
3-S-CW
2-3/4”
1-3/8”
4-PB-CW
2-3/4”
1-3/4”
Polished Brass
4-S-CW
2-3/4”
1-3/4”
8-PB-CW
2-3/4”
1-3/4”
Polished Brass
Security Latch Strike Plate
Wrap-Around Door Reinforcers
• Strengthens or repairs wood jambs
• 3” screws attach to wall stud for extra security.
Product #
Finish
1025
Polished Brass
1025-SSS
Stainless Steel
1025-VB
Dark Bronze
TEL
509.535.1663 • Strengthens and repairs damaged doors.
• Assists in preventing forced entry.
• Fits doors 1-3/4” thick.
• Center to center: 5-1/2”.
TOLL-FREE
Product #
Door Thickness
Backset
Finish
2258-PB
1-3/4”
2-3/4”
Polished Brass
2258-SS
1-3/4”
2-3/4”
Stainless Steel
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Bore Adapter Plates
• Reduces bore from 2-1/8” to 1-1/2”.
• Use with some deadbolts & rim cylinders.
• For locksets with 2-3/8” backset.
• Overall size: 2-1/2”W x 6”H.
• Out-swinging doors only.
• Protects latch or bolt and secures against forced entry.
Product #
Finish
1085
Polished Brass
1085-SSS
Stainless Steel
DOOR HARDWARE
Latch Guard for 2-3/8” Backsets
Product #
Diameter
Finish
1165
2-3/4”
Polished Brass
1165-SN
2-3/4”
Satin Nickel
1165-VB
2-3/4”
Dark Bronze
Adapter/Trim Plates
Heavy Duty Latch Guard for 2-3/4” Backset
• Use with 2-1/8” bore locks, Covers marred area around knob.
• Allows conversion of 2-3/8” to 2-3/4” backset.
Product #
Finish
1089
Polished Brass
1089-SSS
Stainless Steel
1090
Chrome
Diameter
Finish
1170
3-1/2”
Polished Brass
1170-SN
3-1/2”
Satin Nickel
1170-SSS
3-1/2”
Stainless Steel
1171
3-1/2”
Antique Brass
Hole Cover/Filler Plate
Lock Guard
• Covers lockset holes from 1/2” to 2-1/8”.
• Fits doors up to 1-3/4” thick.
Product #
Diameter
Finish
1172
2-5/8”
Polished Brass
1172-SN
2-5/8”
Satin Nickel
1172-VB
2-5/8”
Oil Rubbed Bronze
Blank Filler Plate
• Overall Size: 11-1/4” x 3”.
• Incorporates security frame pin to prevent separation of the door and
frame.
• Covers the latchbolt area of the door and lock providing added protection from burglars, vandals, or normal abuse.
• Use with mortise or cylindrical locks.
Product #
Finish
LG1US2G
Zinc
TEL
509.535.1663 TOLL-FREE
• For Locksets with 2-3/4” backset.
• 7”H x 3”W.
• For Out-swinging doors only, secures against forced entry.
• Protects latch or bolt, residential or commercial use.
Product #
• Covers holes up to 2-1/8” diameter.
Product #
Diameter
Finish
BF-161-PC
2-5/8”
Primed
800.888.1663
391
DOOR HARDWARE
Door Filler Plates
Deluxe Boring Jig Kit
• Made of steel.
• CV-86 converts 86 (mortise) cutout to type 161 2-1/4” latch cutout prep.
• EF-86: Mortise Lock filler plate.
• EF-161/EF-161-S: Filler plates.
• HF-45: Door hinge cutout filler.
Product #
Finish
Overall Size
CV-86
Primed
8” x 1-1/4”
EF-86
Primed
8” x 1-1/4” x 3-/16”
EF-161
Primed
2-1/4” x 1-1/8”
EF-161-S
Primed
2-3/4” x 1-1/8”
HF-45
Primed
4-1/2” x 1-3/4”
Frame Filler Plates
• This kit is supplied with the basic door fixture that will adjust from 2-3/8”
to 2-3/4” backset positions and for wood doors from as thin as 1” to 2-1/2”
thick.
• Includes three carbide spur bits for boring both edge-bore and crossbore, sizes are 1”, 1-1/2” and 2-1/8”. Also included are two complete lock
and strike router template kits, Stock Number LS-166A & LS-171B. To
complete the kit we include a 1/2” hex drive quick-release drill adapter to
chuck the bits into your drill motor, a 1-1/2” reducer ring to use with the
1-1/2” spur bit, aluminum center marker with a stainless steel point and a
spring loaded corner chisel for squaring out the corners on both locksets
and hinges.
Product #
BJ-115-C3
392
Spring Loaded Corner Chisel
• FS-260-PC: ANSI strike cutout.
• FF-45: Frame hinge cutout.
Finish
Overall Size
FF-45
Primed
4-1/2” x 1-5/8”
• Spring loaded chisel cuts out that little round corner of wood in the mortise and makes it a perfect square, with just one hit from a hammer.
• Also works on hinge mortises.
FS-260-PC
Primed
4-7/8” x 1-1/4”
Product #
Product #
CC-1
Latch Marking Chisels
Latch and Strike Plate Template Kit
• For square corner latchbolt faceplates.
• Includes latch template, strike template and center locator.
• Latch size: 1-1/8” x 2-1/4”.
• T-strike size: 1-1/8” x 2-3/4”.
Product #
Size
40-031
1” x 2-1/4”
40-032
1-1/8” x 2-1/4”
TEL
509.535.1663 Product #
LS-171B
TOLL-FREE
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
Bit Key Mortise Lockset
Keyed Mortise Lockset
• Includes: Mortise lock, faceplate, strike and 2 keys.
• Case-hardened steel case - 2-3/8” backset.
• Bolt reversible to left and right handed door.
• Mortise cutout: 5/8” W x 4-1/8” L X 3” D.
• Glass knobs and trim plates.
• Case-hardened steel case.
• Lock bolt is key activated both inside and outside.
• Requires mortise cutout.
Product #
Finish
1139
Polished Brass
Product #
Finish
1155
Polished Brass
DOOR HARDWARE
Replacment Knobs, Roses and Door Sets
Glass Knob Passage Latch Set
Keyed Mortise Lockset
• 2 glass knobs and rosettes, latchbolt, strikeplate and spindle.
• Decorative passage latch for 2-3/8” backset applications.
• Fits up to a 1-1/2” diameter bore. NOT for doors with 2-1/8” bores.
• Rosette Diameter: 2-1/2”.
Product #
Finish
1129
Polished Brass
Finish
Polished Brass
1148-SN
Satin Nickel
1148-VB
Oil Rubbed Bronze
Glass Knob Set with Rosettes
Mortise Trim Plates
• 2 glass knobs and rosettes with spindle.
• For use with various interior mortise locksets or latch sets.
• Spindle size is 7mm; Rosette Diameter: 2-1/2”.
Product #
Finish
1143
Polished Brass
Glass Knob Set with Spindle
• Use on various bit key mortise locksets.
• Includes mounting hardware.
Product #
Finish
1142
Polished Brass
• Knobs and trim plates.
• Case-hardened steel case.
• Lock bolt is key activated both inside and outside.
• Requires mortise cutout.
Product #
1148-PB
• 2 glass knobs with spindle.
• Spindle size is 7mm.
TEL
509.535.1663 TOLL-FREE
Product #
Finish
1140
Polished Brass
1140-SN
Satin Nickel
800.888.1663
393
DOOR HARDWARE
Knob Set with Rosettes
Rosettes
• For old style passage locks.
• Screw mounted on door.
• Diameter: 2-1/2”
• 2 knobs and rosettes with spindle.
• Rosette Diameter: 2-1/2”.
Product #
Finish
1137
Polished Brass
Product #
Finish
1136
Polished Brass
Replacement Spindles
Solid Brass Knob Set with Spindle
• Threaded steel replacement spindles for interior mortise type locks or
latch sets.
• Knob pair with spindle.
Product #
Finish
1130
Polished Brass
Product #
Finish
1132
Chrome
Solid Brass Round Screw Covers - Dimpled
Knob Set with Spindle
New Item!
• Perfect solution for exposed screws.
• Includes threaded insert, mounting screw not included.
• Knob pair with spindle.
Product #
Finish
1135
Polished Brass
Product #
Finish
SCD100U10B
Oil Rubbed Bronze
SCD100U15
Satin Nickel
Solid Brass Round Screw Covers - Flat
Solid Brass Rosettes
New Item!
• Perfect solution for exposed screws.
• Includes threaded insert, mounting screw not included.
• For old style passage locks.
• Screw mounted on door.
• Diameter: 2-1/2”.
394
Product #
Finish
1141
Polished Brass
1141-SN
Satin Nickel
TEL
509.535.1663 TOLL-FREE
Product #
Finish
SCF100U10B
Oil Rubbed Bronze
SCF100U15
Satin Nickel
800.888.1663
To Order – Call 509.535.1663 or 800.888.1663
DOOR HARDWARE
Padlocks
Laminated Steel Padlocks
• Hardened steel shackle for extra cut resistance.
• 9/32” diameter steel shackle.
• Shackle clearance: 1-1/2” H x 7/8” W.
• Laminated steel body for superior strength.
Product #
Description
Product #
Description
Shackle
Body
3LFKA3861
Keyed Alike # 3861 1-1/2”H
Shackle
1-1/2”W
Body
1KA2004
Keyed Alike # 2004
15/16”H
1-3/4”W
3LFKA3893
Keyed Alike # 3893 1-1/2”H
1-1/2”W
1KA2008
Keyed Alike # 2008
15/16”H
1-3/4”W
1KA2086
Keyed Alike # 2086
15/16”H
1-3/4”W
1KA2359
Keyed Alike # 2359
15/16”H
1-3/4”W
Laminated Steel Padlock
• Shackle clearance: 1” H x 15/16” W.
• Laminated steel body for superior strength.
Description
Shackle
Body
1LJKA2086
Keyed Alike # 2086
2-1/2”H
1-3/4”W
1LJKA3086
Keyed Alike # 3086
2-1/2”H
1-3/4”W
Description
Shackle
Body
Keyed Alike # 2008
1”H
2”W
5KAA340
Keyed Alike # A340
1”H
2”W
5KAA549
Keyed Alike # A549
1”H
2”W
General Security Steel Padlock
Padlocks
Product #
Product #
5KA2008
• Shackle clearance: 9/16” H x 1/2” W.
Product #
Description
Shackle
Body
7KAP761
Keyed Alike # 761
9/16”H
1-1/8”W
Universal Pin Key Tool
Product #
Description
Shackle
Body
3KA3210
Keyed Alike # 3210
3/4”H
1-9/16” W
3KA3553
Keyed Alike # 3553
3/4”H
1-9/16” W
3KA3861
Keyed Alike #3861
3/4”H
1-9/16” W
• For keying Universal Pin Padlocks to any Master Lock key.
Product #
376
TEL
509.535.1663 TOLL-FREE
800.888.1663
395
DOOR HARDWARE
Universal Pin Padlock
Schlage Padlocks
• Universal Pin padlocks for keying convenience, use 376 Universal Pin Key
Tool (sold separately).
• Lock pinned to customer’s key in minutes.
• Shackle clearance: 15/16” H x 3/4” W.
Product #
Description
Shackle
1UP
Universal Keying 15/16” H
Body
1-3/4”W
• Made of solid brass and features 6-pin solid brass cylinder.
• Rekeyable: Features a Schlage C Keyway.
Product #
Description
Shackle
Body
KS23D2300
Schlage C Kwy
1-1/2”
1-25/32” x 2-3/16”
KS43F2300
Schlage C Kwy
2”
1-15/16” x 2-3/16”
Combination Padlocks
Tool(sold separately).
• Shackle clearance: 1” H x 15/16” W.
Product #
Description
5UP
Universal Keying 1” H
Shackle
Body
2”W
• Solid brass case and hardened steel shackle with 3/4” opening.
• Choose from 10,000 possible combinations which can be easily changed
and set.
Padlocks
Product #
Body
K436
1”
1-15/16” x 1-3/4”
K437
2-1/4”
1-15/16” x 1-3/4”
1245 Padlock Eyes
Tool(sold separately).
396
Shackle
Product #
Description
3LFUP
Universal Keying 1-1/2”H
TEL
509.535.1663 Shackle
Body
1-1/2”W
TOLL-FREE
• Can be mounted opposed to each other on door and frame, screws are
concealed when door is in a closed position.
Product #
Finish
S298-280
Zinc
800.888.1663

door hardw are - Spokane Hardware Supply, Inc.

Transcription

Similar documents

Zak McKracken – Mayan Maze Map

LifeScapes Highboy Storage Shed

LiftMaster 81LM

CONTAINERS Cement Washout Container

Rilo Kiley After Hours

Emtek® Series - Toledo Door and Window

8`Wide Woodside Vinyl Storage Sheds

weathertite

“Over 125 Years of Quality” Double Acting Spring Hinges