nsm press automation systems

NSM
PRESS AUTOMATION
SYSTEMS
PRESS AUTOMATION PRODUCTS
• Press Line Automation
• Stacking Systems
• De-Stacking Systems
• Hot Stamping Automation
• End-of-Line Stacking Systems
• End-of-Line Conveyor Systems
For 50 years, the NSM MAGNETTECHNIK GmbH has ranked
among the internationally leading manufacturers of handling systems for metals.
We meet our customers‘ increasing requirements on quality and
productivity with simultaneous flexibility and process reliability by
comprehensive expertise in automation technology, mechanical
engineering as well as control technology. Our most important
customers are the automotive industry.
Our design is based on our customers‘ special requirements.
This means: Freely scalable degree of automation and individual
adaptation of the automation solutions to the available investment capital.
PRESS TO PRESS
Robot
Robot with Rotary 7th axis
High Speed Linear Feeder (HSF)
PERFORMANCE
9 – 11 SPM
11 – 13 SPM
17 – 23 SPM
HIGH SPEED LINEAR FEEDER (HSF) BENEFIT AT A GLANCE:
•
•
•
•
•
•
Reliable and approved linear kinematics
Fastest Feed stroke on the market
Easy to teach-in because of simple linear X and Z kinematics
Full 3D Line Simulation with Siemens Press Line Simulation PLS
Synchronization from Press to Press „On The Fly“
Part Orientation Functions - Shifting, Rotating, Tilting
PRESS LINE AUTOMATION
Different types of presses can be adapted to our modular systems
and give you the best return on your investment. Our standards
products and pre-tested modular solutions reduce project risk,
time and costs, ensuring an easy installation and maintenance.
We also take care of upgrading existing press lines. Our experts
are able to support customers in achieving and maintaining productivity of their capital assets.
NSM Press to Press Automation Systems are in continuous evolution
to become faster, with specific emphasis on reducing critical
press occupation times. Full line synchronization assures the optimum interaction of the automation with the press movements
to make sure a fast part flow in the entire press line. Press Line
Simulation (PLS) supports a high-precision 3D press line model
including press to press automation, die set tooling, parts and
corresponding kinematics.
STACKING SYSTEMS
NSM is the market and technology leading
manufacturer of different stacking systems
for magnetic non-magnetic and aluminum
blanks. Our own developments to stack
precisely all kind of automotive blanks are
the answer to the latest industry demands
– such as patented hybrid conveyor system
for steel an aluminum banks and pusher
stacking systems for tailored blanks.
TYPICAL OUTPUT DATA FOR
STEEL AND ALUMINUM:
STACKING SYSTEM
Start-Stop Drop-Off
Continues-Run Drop-Off
Pusher Matrix
PERFORMANCE
100 SPM
140 SPM
90 SPM
DE-STACKING SYSTEMS
Whether laid out for steel or aluminum
blanks: highest flexibility, shortest fully
automatically change-over times, great availability as well as long durability – these are
the excellent features of NSM-destacking
system.
The NSM modular design allows to
custom-assemble the optimal destacker
according to the press type. Dependent to
the customer-specific requirements and
output rate the destacker can either be
carried out by robots, feeder or overhead
conveyors.
TYPICAL DESTACKER PERFORMANCE DATA
FOR STEEL AND ALUMINUM BLANKS:
DESTACKER TYPE
Transfer Press Destacker
G2 Destacker
G2 High Speed Destacker
G1 Destacker
G1 High Speed Destacker
PERFORMANCE
34 SPM
16 SPM
26 SPM
16 SPM
22 SPM
HOT STAMPING LINE AUTOMATION
Hotforming enables the production of car
body parts meeting highest safety and
quality standards and reducing the component‘s weight at the same time. The method
requires an automation process reproducible
at any time.
NSM MAGNETTECHNIK realizes the whole
automation chain; from the blank destacking
system to the roller furnace via the pressing
automation down to the fully automatic
destacking of finished parts in transport
racks or bins.
CUSTOMER BENEFIT AT A GLANCE:
•
•
•
•
•
•
•
Maximum production capacity by optimal cycle times
Scalable line layout in accordance with
customer requirements
Integration of the different furnace and
press systems
Fully automatic line/ tooling change
Standardized line and safety control
Interfaces for quality assurance and
production data collection
END-OF-LINE SYSTEMS
In order to guarantee a high degree of
production reliability, flexibility, speed and
maximum component quality in the handling
of finished chassis parts, NSM offers manual
and robot stacking systems for such parts,
which meet the high requirements of modern
component manufacturing.
NSM MAGNETTECHNIK GMBH
Luetzowstraße 21
D-59399 Olfen
Tel +49 2592 880
Fax +49 2592 881 88
nsm-magnettechnik.de
[email protected]