Modular Optic System (MOS)

GLOCK
Modular Optic System (MOS)
www.glock.com
GLOCK Introduces the
new Modular Optic System
(MOS) configuration for
GLOCK Pistol Models
*Optic not included
GLOCK Ges.m.b.H. announces the
launch of its newest product – the
GLOCK Pistol Models in MOS configuration which offer a set of Adapter
Plates in order to mount different
Optical Systems.
G34
CONFIGURATION
The MOS configuration is offered
on the GLOCK Pistol Models
G17 Gen4, G34 Gen4, G35 Gen4
and G41 Gen4.
There are 4 numbered GLOCK
MOS Adapter Plates available
for Optical Sights of following
manufacturers:
- Adapter Docter, Meopta,
Insight (01)
- Adapter Trijicon (02)
- Adapter C-More (03)
- Adapter Leupold (04)
01
Docter,
Meopta,
Insight
02
Trijicon
04
Leupold
To install the applicable MOS Adapter Plate remove the GLOCK Cover
Plate first. Then select the appropriate GLOCK MOS Adapter Plate (see table and markings of the
GLOCK MOS Adapter Plates) and
place it in the correct position and
orientation.
Rotate
Rotate
>>
Adapter Docte
r, Meopta, Insigh
t
Adapter Trijico
n
Adapter C-Mo
re
Adapter Leupo
ld
GLOCK MOS
AdApter
03
>>
02
>>
01
>>
pLAte MAr
KinGS
)
Modular_Optic_S
driver (TX10
• Torx ® Screw
ystem_2015_SET
riVer
screws
• 2 units
6
mm
/ 0,24 Inch
(M3x6) Torx ®
screws to install
the GLOCK
MOS
Adapter Plates
. Screws come
drop of glue
with
applied.
• 2 units 6
mm / 0,24
Inch (M3x6
screws come
) Torx ®
as additional
replacement
er Plate remov
e it from
er Plates with
a dry
For preventive
Manual.
17.02.2015 16:42:54
gun maintenance
please check
Adapter Leupo
rs
GLOCK Owne
ld
r, Meopt
Adapter Docte
n
Adapter Trijico
e
Adapter C-Mor
2. SCreWS
gun oil.
LUbriCAtiOn
using a quality
Adapter Plate
it
GLOCK MOS
And SpreAd
Lubricate the
eACH Side
L drOp On
USe One SMAL
ACe!
entire SUrF
OVer tHe
• 4 numbered
GLOCK MOS
Adapt
Plates for use
of optical system er
(see list of
s
manufactur
ers below
GLOCK Pistol
s in MOS config ). For
slide width
uration
25,5 mm/1
.00 In.
GLOCK MOS
a, Insight
AdApter pLAt
Cleaning and
03
02
>>
01
>>
S
3. SCreWdr
(TX10)
iVer
cloth.
e it from
CLeAninG
er Plate remov
K MOS Adapt
a dry
ng your GLOC
er Plates with
Before cleani
K MOS Adapt
clean GLOC
the pistol. Only
parts
04
>>
>>
e MArKinG
driver
®
• Torx Screw
1. GLOCK
MOS
pLAteS Set AdApter
01
pistol is unloa
ded
hamber empty
)
e GLOCK Cover
Adapter Plate.
NG
01.indd 1
3. SCreWd
ing a quality
gun oil.
nd SpreAd
it
2. SCreWS / 0,24 Inch (M3x6) Torx
mm
• 2 units 6
MOS
the GLOCK
screws to install
with
. Screws come
Adapter Plates
®
applied.
drop of glue
(M3x6) Torx
mm / 0,24 Inch
• 2 units 6
replaceas additional
screws come
ment screws
Service
Only fire the GLOCK MOS Pistol Models with the GLOCK Cover Plate mounted or a GLOCK Adapter Plate and Optical Sight installed. For more detail
instructions how to install or remove the GLOCK MOS Adapter Plates please
complete all steps as indicated in the GLOCK Manual.
LOCK Owne
rs
16:42:54
04
Tighten the 2 Torx® screws to fix
the GLOCK MOS Adapter Plate on
your GLOCK MOS Pistol. When the
GLOCK MOS Adapter Plate is completely mounted on your GLOCK
MOS Pistol install the Optical System according to the directions of
the manufacturer.
03
C-More
17.02.2015
The MOS Adapter-Set includes a
Torx® Screwdriver (TX10) and 2
Torx® screws (plus 2 Torx® spare
screws) to install the GLOCK MOS
Adapter Plates. All screws come
with a drop of glue applied.
®
GLOCK
ed
pistol is unload
your GLOCK
er empty)
Make sure that
ed and chamb
(magazine remov oving the GLOCK Cover
ing/rem
Adapter Plate.
before install
GLOCK MOS
Plate or the
pLAteS Set K MOS Adapter
GLOC
s
• 4 numbered
of optical system
. For
Plates for use
acturers below)
(see list of manuf
ration
in MOS configu
GLOCK Pistols
mm/1.00 In.
slide width 25,5
! WARNING
▲
AdApter
1. GLOCK MOS 01
parts
GLOCK USA
GLOCK
GLOCK Inc.
6000 Highlan
ds Parkway
Smyrna, GA
30082
U.S.A.
Tel.: +1 770
- 432 1202
Fax: +1 770
- 433 8719
et 01
MOS Adapter-S
c System)
(Modular Opti
The technical data of standard GLOCK Pistol Models is also applicable
for GLOCK Pistol Models in MOS configuration.
om
www.glock.c
IA
GLOCK AUSTR
.H.
GLOCK Ges.m.b
latz 1
Gaston Glock-P
-Wagram
2232 Deutsch
GLOCK AMER
ICA
GLOCK Americ
a S.A.
Plaza Indepen
dencia 831,
Office 802;
11100 Montev
ideo
URUGUAY
Tel.: +598
- 2 - 902 2227
Fax: +598
- 2 - 902 2230
AUSTRIA
2247 - 90300-0
Tel.: +43 (0)
12
2247 - 90300-3
Fax: +43 (0)
Pacific
GLOCK Asia
Avenue
OB1, 92 Siena
Unit 3, LG/F,
Discovery Bay
DB North Plaza,
HONG KONG
Lantau, N.T.,
- 3858
Tel.: +852 2375
- 7089
Fax: +852 2654
The GLOCK Modular Optic System (MOS) configuration will be available for
purchase starting from March, 2015. For further information, please contact
your GLOCK partner directly.
ICA
GLOCK AMER
S.A.
GLOCK America
dencia 831,
Plaza Indepen
deo
11100 Montevi
Office 802;
URUGUAY
2 - 902 2227
Tel.: +598 2 - 902 2230
Fax: +598 -
© 2015 GLOCK
EAST
GLOCK MID.
East FZE
GLOCK Middle
P.O. Box 54260
Dubai
EMIRATES
UNITED ARAB
4 - 299 5779
Tel.: +971 4 - 299 4442
Fax: +971 -
15
PACIFIC
GLOCK ASIA Limited
| 31266 / 02
GLOCK Inc.
ds Parkway
6000 Highlan
30082
Smyrna, GA
U.S.A.
- 432 1202
Tel.: +1 770
- 433 8719
Fax: +1 770
© GLOCK 2015
GLOCK USA
MOS Adapter
-Set 01
(Modular Opti
c System
GLOCK AUST
RIA
GLOCK Ges.m.
b.H.
Gaston Glock-P
latz 1
2232 Deutsc
h-Wagram
AUSTRIA
Tel.: +43 (0)
2247 - 903000
Fax: +43 (0)
2247 - 90300312
www.glock.com
GLOCK ASIA
PACIF
IC
GLOCK Asia
Pacific Limited
Unit 3, LG/F,
OB1, 92 Siena
Avenue
DB North Plaza,
Discovery Bay
Lantau, N.T.,
HONG KONG
Tel.: +852
2375 - 3858
Fax: +852
2654 - 7089
GLOCK MID.
EAST
GLOCK Middle
East FZE
P.O. Box 54260
Dubai
UNITED ARAB
EMIRATES
Tel.: +971
- 4 - 299 5779
Fax: +971
- 4 - 299 4442