65-68 Restomod Ram-Jet Racing Hood

Transcription

65-68 Restomod Ram-Jet Racing Hood
65-68 Ground Effects Kits
ONE OF THEM IS JUST RIGHT FOR YOU! Please check out this section of our current catalog
for pictures and descriptions of the street apron with molded spoiler and the racing apron with
molded spoiler (as on the Ronster) which are included in the 5 piece kits.
Designed, Road Tested, and Ready
for your Restomod!
Ever since the Ronster was completed in 1996, we have
constantly received requests for the ground effects package we built for it. Now, you can get a set for your Mustang!
Made of hand laid fi berglass with a gel coat fi nish, our fi rst
run will be designed to fi t all ‘65 and ‘68 Mustangs, Coupes,
Convertibles and Fastbacks! Our 6 piece kit has been designed
to be very easy to install on your stock Mustang and can be either
left black or painted to match! Yes, our Ground Effects Kit will
really make your Mustang stand out from the crowd!
Shipped Truck Freight.
4 Piece Kits Starting at
$329.95!
(#7691)
65-66
65-66
65-66
65-66
67-68
67-68
67-68
4 piece kit .......................................................................#6322
6 piece kit .......................................................................#7691
5 piece kit w/racing apron & molded spoiler ...................#8691
5 piece kit w/street apron & molded spoiler ....................#8691
4 piece kit, ......................................................................#10117
6 piece kit, ......................................................................#10079
5 piece kit, w/street apron & molded spoiler ...................#10598
$329.95
$389.95
$559.95
$559.95
$329.95
$389.95
$559.95
65-68 Restomod Ram-Jet Racing Hood
®
Give your Mustang an exciting new look with our Restomod Ram-Jet Racing Hood. Hood
and inner liner are made of precision hand-laid fiberglass with metal hood latch and hinge
reinforcement plates. Provides an additional 3 inches of hood clearance over the stock
hood. Shiny black gel-coat finish, fit and paint to match your Mustang.
Order one today! Shipped Truck Freight.
1965 to 1966
Mustangs Part ............. # 10451
1967 and 1968 Mustangs Part ............. # 10452
Only $479.95
Scoop openings can be
cut out or left as-is!
$15.00 Box
Fee Applies
138 Fiberglass
ea
RESTORATION
HEADQUARTERS
ORDER TOLL FREE!
1-800-999-4289
Fiberglass Hoods
1965-1966 R2S Hood
Scoop openings
need to be cut out!
Be the first in your club to own the hottest Restomod product on
the market! Our original design starts with a cowl-induction style
hood, and adds a twist; twin front scoops for maximum air intake
and top notch looks! Plus, this hood can be adapted to Ram-Air
to get even better performance out of your pony! Features metal
reinforced hinge and latch mounts. Black gel coat finish, fit and
finish to your personal level of perfection!
Shipped truck freight.
65-66 Mustangs Plus R2S Hood ............. #7565
$15.00 Box
Fee Applies
$439.95 ea
3” Rise Cowl Induction Hood
If your project includes a hi-rise manifold, big carburetors, or the like, this
is the perfect hood for you. Not only does it look great, but it will give you
an additional three inches of clearance under your hood! That’s plenty of
room for almost anything you want to do to your pony! Black fiberglass with
gel coat finish; fit and paint to match your Mustang.
Shipped truck freight.
65-66
67-68
69-70
$15.00 Box
Fee Applies
Cowl Induction; 3” ...................................#1119
Cowl Induction; 3” ...................................#3832
Cowl Induction; 3” ...................................#2707
$439.95 ea
$439.95 ea
$439.95 ea
PLEASE NOTE: We strive to bring you the finest quality fiberglass products available anywhere. However, due
to the nature of fiberglass; fitting and finishing of fiberglass body parts takes more time than steel body parts.
Be prepared to invest the time necessary to achieve your personal level of perfection.
Shelby GT 350 Style Hood
More than a classic, you’ll give your Mustang the look of the legendary
Shelby Mustangs when you install this hood. Featuring metal reinforced
latch and hinge mounting areas, this hood will give you years of service
and great looks. Why not make your pony the envy of everyone in your
club? Order one today! Black fiberglass with gel coat finish; fit and paint
to match your Mustang.
Shipped truck freight.
65-66
65-66
GT350; Shelby Style ............................#511
GT350; Shelby Style w/steel frame ......#12676
$15.00 Box
Fee Applies
$419.95 ea
$499.95 ea
67 Shelby Style Hood
Do you like the look of the 67 Shelby Hood but don’t want to have to change the headlight buckets and bumper brackets to get it? Our 67 Shelby Style Fiberglass Hood fits
any 67-68 Mustang without having to change anything else! Also available for 65-66.
Black fiberglass with gel coat finish; fit and paint to match your Mustang.
Shipped truck freight.
65-66
67-68
67-68
ORDER ONLINE!
mustangsplus.com
67 Shelby Style hood ......................... #4871 $439.95
67 Shelby Style hood ......................... #811
$439.95
67 Shelby Style hood
with steel frame.................................. #14683 $484.95
RESTOMOD
HEADQUARTERS
ea
ea
$15.00 Box
Fee Applies
ea
Fiberglass 139
Fiberglass Hoods
3” Rise Teardrop
Thunderbolt Style Hood
Buy With Confidence!
All of our fiberglass hoods feature metal reinforced
latch and hinge mounting areas for wear reduction!
Inspired by the early Fairlanes, the tradition continues in this great looking reproduction. Featuring two large cowl induction openings plus metal reinforced mounting areas for
both latch and hinge areas, this hood will give you an extra 3½” of clearance under your
hood leaving room for large carburetors, high rise manifolds and the like. Black fiberglass
with gel coat finish; fit and paint to match your Mustang. Shipped truck freight.
65-66
67-68
Thunderbolt; w/3½” Bubble ........... #2501
Thunderbolt; w/3½” Bubble............ #4584
$459.95 ea
$459.95 ea
$15.00 Box
Fee Applies
Fiberglass Hood with Cougar
Eliminator 1” Scoop
69-70 Fiberglass Hood W/Cougar Eliminator 1” Scoop
..................................... #869
$439.95 ea
$15.00 Box
Fee Applies
68 Shelby GT350/500
67 Shelby GT500 w/Louvers
Originally seen on big blocks with air. Standard replacement built to
original specs. Black fiberglass with gel coat finish; fit and paint to match
your Mustang.
Shipped truck freight.
Standard equipment style for 68 Shelby’s! Made to original specifications.
It features a large twin scoop at the front of the hood and louvers at the
cowl end. Black fiberglass with gel coat finish; fit and paint to match your
Mustang.
Shipped truck freight.
$15.00 Box
Fee Applies
$15.00 Box
Fee Applies
67
Shelby GT 500 .............................................#832
$574.95 ea
68
67 Shelby GT350/500
Made to original specs. Standard replacement part for all 67 Shelby’s.
Black fiberglass with gel coat finish; fit and paint to match your Mustang.
Shipped truck freight.
Shelby GT 350/500 ....................................#833
Fiberglass Hood With NASA Scoops
Fiberglass with gel coat; fit and paint to match your Mustang.
Shipped truck freight.
(#844)
(#848)
$15.00 Box
Fee Applies
67
Shelby GT 350/500 .....................................#831
$519.95 ea
$519.95 ea
69-70 GT 350/500 w/NASA scoops........................#844
71-73 Fiberglass hood w/NASA scoops .................#848
$15.00 Box
Fee Applies
$496.95 ea
$508.95 ea
PLEASE NOTE: To be blunt, fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass body
parts are built closer to race car standards than show car standards. We have come to this conclusion after many years of installing and selling fiberglass body
parts from many different manufacturers. Check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have been sanded or painted
they can no longer be sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such parts. Removal of the stock hood
springs and use of lightweight springs and a prop rod is recommended.
140 Fiberglass
RESTORATION
HEADQUARTERS
ORDER TOLL FREE!
1-800-999-4289
Fiberglass
Light Tension Hood Springs
Tear Drop Hood Pin Kit
A prop rod is the best way to support your fiberglass hood, however if you
must use hood springs, we recommend these light tension springs.
For “glass” hoods with full frames.
65-66
All ......................................................... #4338
67-68
All ......................................................... #4552
$ 33.95 pr
$ 39.95 pr
Ring Brothers Tear Drop billet hood
pin kit for early and late model Ford
Mustangs as used on “Reactor”. Uses
a stainless steel ball lock pin, ensuring secure hood closure. Includes all
mounting hardware and easy to follow instructions.
65-70 Tear drop ................................................. #14214
Prop Rods
$399.95 kit
Hood Pin Clip
(#12116)
Hair pin style, chrome .......................................... #13477
Flip-over style, chrome ........................................ #13478
24” lanyard style, chrome .................................... #13479
(#6248)
65-73 Stainless steel hood prop rod .....................#12116
65-73 Universal Prop Rod ....................................#6248
$34.95 ea
$29.95 ea
$
$
$
4.95 ea
5.95 ea
5.95 ea
Hood Locks & Pin kits
Billet Aluminum Hood Pin Kit
(#14183)
(#3603)
Ring Brothers billet hood pin kit for early and late model Ford Mustangs
will surely set you apart from the crowd! Uses a stainless steel ball lock
pin, ensuring secure hood closure. Includes all mounting hardware and
easy to follow instructions.
65-70 All; silver plate ......................................... #14183 $249.95 kit
65-70 All; black plate ........................................ #14186 $249.95 kit
65-73
65-73
65-73
65-66
67
65-73
(#7383)
(#2435)
Flush Mount; Set/2; Chrome ............. #3603
3/16” Flip-Over Pin Style; Set/2 ............. #3621
Hair Pin Style; Set/2 .......................... #2435
Hood Lock/Pin Kit; Concourse .......... #7111
Locks/Pins/Cables, Concourse ......... #2729
Stainless Hood Lock Plates............... #7383
(#3621)
$ 21.95
$ 12.95
$ 11.95
$ 69.95
$114.95
$ 19.95
set
set
set
set
kit
set
Late Model Mods
Cowl Induction Hood
$15.00 Box
Fee Applies
Automotive designers have long known about the theory of cowl induction. Now you
can get this for your late model too with our great looking and great performing 5.0L
Cowl Induction Hood! Available with or without louvers, this is the perfect touch for
your Late Model project! Black gel coat finish. Fit and paint to your personal level of
perfection. Shipped truck freight.
83-86
87-93
87-93
3” Rise; .................................................................#6223
3” Rise; .................................................................#4378
3” Rise; w/Louvers ................................................#5867
$438.95 ea
$439.95 ea
$459.95 ea
Wing Spoiler
Get great looks and great handling for your 5.0L with this great wing style rear spoiler! Our
Saleen style rear wing easily attaches to your late model and can be painted to match your
Mustang. Black gel coat finish. Fit and paint to your personal level of perfection.
Shipped truck freight.
79-93
87-93
Hatchback; Fox Chassis.....................................................#5844
Convertible; Fox Chassis ...................................................#3829
ORDER ONLINE!
mustangsplus.com
$15.00 Box
Fee Applies
$344.95 ea
$344.95 ea
RESTOMOD
HEADQUARTERS
Fiberglass 141
R-Model Front Apron
When you go to the track, you demand performance! Here’s another great looking and performing front apron from Mustangs Plus! A reproduction of the 65-66 GT350 Racing Apron,
it has a large radiator opening for increased cooling and will also accommodate ducting for
your Mustang’s front brakes. Note: this apron does not accept a bumper and may not be
street legal in some areas. If you need this apron for use with a bumper, please see below.
Black fiberglass with gel coat finish; fit and paint to match your Mustang.
65-66 ....................................................................................................#521
$184.95 ea
This R-Model Front Apron Is Featured On
George Galoosis Sr. Grabber Green #904 Race Coupe!
$15.00 Box
Fee Applies
Street Style Front Apron - (Accepts Stock Bumper)
This apron features a large radiator opening and is designed to accept a stock bumper. It’s
perfect for those who want a performance apron for the street! Black fiberglass with gel coat
finish; fit and paint to match your Mustang.
65-66 .........................................................................#522
67-68 .........................................................................#3724
$184.95 ea
$184.95 ea
$15.00 Box
Fee Applies
Note: Apron Does Not Include Bumper.
FOR BUMPERS PLEASE SEE OUR EXTERIOR TRIM SECTION IN THIS CATALOG.
R-Model Style Front Apron with Spoiler
For the maximum in appearance and ground control, choose this great looking front apron from
Mustangs Plus! Based on the R-Model Apron, it has a large radiator opening for increased
cooling plus a molded in spoiler for great looks and superb ground control! Note: this apron
does not accept a bumper and may not be street legal in some areas. If you need this apron
for use with a bumper, please see below. Black fiberglass with gel coat finish; fit and paint
to match your Mustang.
65-66 ...................................................................................................#809
67-68 Shipped truck freight. ...........................................................#2784
$301.95 ea
$301.95 ea
This R-Model Front Apron with Spoiler Is Featured On
the Original Restomod®, THE RONSTER!
$15.00 Box
Fee Applies
Street Style Front Apron with Spoiler - ( Accepts Stock Bumper)
For the maximum in appearance and ground control, choose this great looking front apron from Mustangs Plus! Based on the R-Model Apron, it has a
large radiator opening for increased cooling, a molded in spoiler for great
looks and superb ground control, plus it will accept a stock bumper! Black
fiberglass with gel coat finish; fit and paint to match your Mustang.
65-66 .........................................................................#808
67-68 .........................................................................#814
69-70 .........................................................................#816
$301.95 ea
$301.95 ea
$301.95 ea
65-68 Front Apron w/Spoiler Style
Note: Apron Does Not Include Bumper.
FOR BUMPERS PLEASE SEE OUR EXTERIOR TRIM SECTION IN THIS CATALOG.
69-70 Front Apron w/Spoiler Style
$15.00 Box
Fee Applies
Spoiler Trunk Lid Kit
The look that was born with the 68 California Special is now available for all 65-70
Coupes, Convertibles, and Fastbacks! The package includes a fiberglass trunk lid with
spoiler plus matching quarter extensions. This kit looks exceptionally nice if you’ve
dropped the rear of your Mustang an inch or more! Black fiberglass with gel coat finish;
fit and paint to match your Mustang. Shipped truck freight.
$15.00 Box
Fee Applies
142 Fiberglass
65-66
65-66
67-68
67-68
69
70
69-70
Coupe & Convertible .......................................................#807
Fastback .........................................................................#806
Coupe & Convertible .........................................................................#813
Fastback ..........................................................................#812
Coupe & Convertible .......................................................#818
Coupe ..............................................................................#5808
Shelby Fastback ..............................................................#817
RESTORATION
HEADQUARTERS
$ 459.95
$ 459.95
$ 459.95
$ 459.95
$ 459.95
$ 459.95
$ 459.95
kit
kit
kit
kit
kit
kit
kit
ORDER TOLL FREE!
1-800-999-4289
Eleanor Coupe/Convertible Body Kit
KIT INCLUDES: Upper and lower noses, lower nose brace, hood, lower scoops,
front and rear wheel flares, side skirts, headlamp buckets, spoilered trunk lid with
end caps, tail lamp panel, grille and exhaust tips.
67-68 Eleanor Kit; Coupe/Convertible ............................ #11552
$4,449.95 kit
Eleanor Fastback Body Kit
KIT INCLUDES: Upper and lower noses, lower nose brace, hood, lower and upper
scoops, front and rear wheel flares, side skirts, headlamp buckets, spoilered trunk
lid with end caps, tail lamp panel, grille and exhaust tips.
67-68
Eleanor Kit; Fastback ............................... #11551
$4,795.00 kit
Note: These are not OEM parts. Fit and paint to match your Mustang.
SAVE TIME & MONEY WITH THESE GREAT ELEANOR BODY KITS!
Shipped truck freight.
FIBERGLASS ELEANOR PARTS
Note: These are not OEM parts. Fit and paint to match your Mustang.
H
E
K
D
F
A
B
C
C
Upper Nose Section
Lower Nose Section
Hood
J
G
I
D
E
F
Upper Scoops
Lower Scoops
Trunk Lid and End Caps
G
H
I
A
Side Skirts
Front Flares
Rear Flares
Eleanor Front Grill
mustangsplus.com
J
K
Light Buckets
Tail Light Panel
Eleanor Front Brace
67-68 Eleanor Upper & Lower Grill........................#10155 $291.95 ea
ORDER ONLINE!
B
67-68
..................................................................#10778 $179.95
RESTOMOD
HEADQUARTERS
ea
Fiberglass 143
FIBERGLASS ELEANOR PARTS
Upper Nose Section
Side Skirts
67-68
67-68
Upper Nose HL section. .........................#8059
Side skirts; must use flares. ...................#8451
Front Flares
Lower Nose Section
67-68
67-68
$449.95* pr
$494.95* ea
Lower Nose requires fender flares, ........#10508
Front flares .............................................#8449
$494.95* ea
$374.95* pr
Rear Flares
Hood
67-68
Rear flares ..............................................#8450
$374.95* pr
Light Buckets
67-68
Fiberglass hood w/ scoop.......................#8298
$594.95* ea
Upper Scoops
67-68
Headlamp buckets; Fiberglass. ..............#10499
$269.95 pr
Tail Light Panel
67-68
67-68
Upper side scoop ...................................#8273
$324.95 pr
Uses 1967 Cougar Lamps; No fuel opening.
...............................................................#10152
$259.95* ea
Rear Valnce
Lower Scoops
67-68 Rear Valance w/molded in back up lights...#13446 $179.95 ea
Eleanor Exhaust Tips
67-68
Lower side scoop; non functional. ..........#8274
$324.95 pr
(12180)
Trunk Lid & End Caps
(#10153)
67-68 Cast aluminum (not in kit)......................... #12180
67-68 (Eleanor side skirt modification required) . #10153
$359.95 pr
$119.95 pr
Eleanor Outside Mirror
67-68
Trunk lid w/spoiler and end caps. ...........#812
*$15.00 Box Fee, Shipped Truck Freight.
144 Fiberglass
$459.95* kit
67-68 Eleanor Outside Mirror;
Left or Right Side. .....................................#10154
RESTORATION
HEADQUARTERS
$139.95 pr
ORDER TOLL FREE!
1-800-999-4289
Fiberglass
71-73 Fastback
Fiberglass Trunk Lid
Front Spoilers
$15.00 Box
Fee Applies
Weighs far less than factory originals! Black fiberglass with gel coat finish; fit and paint to match your Mustang. Shipped Truck Freight
71-73 Fastback .....................................................#849
$323.95 ea
Fiberglass Bumper
65-66
67
67-68
69
69-70
70
71-73
Black fiberglass or Plastic
Fit and paint to match your Mustang.
FRONT
All ....................................... #242
$ 93.95
Shelby Only ........................ #237
$ 93.95
All; ex. Shelby..................... #239
$ 93.95
All; Plastic ........................... #2240 $ 79.95
All; ex. Shelby..................... #238
$ 93.95
All; Plastic ........................... #2241 $ 79.95
All ....................................... #349
$ 93.95
ea
ea
ea
ea
ea
ea
ea
$15.00 Box
Fee Applies
REAR
$15.00 Box
Fee Applies
Black fiberglass with gel coat finish; fit and paint to match your Mustang.
65-66 Front ...........................................................#531
67-68 Front ...........................................................#437
69-70 Front ...........................................................#804
$104.95 ea
$104.95 ea
$104.95 ea
65-66 Rear............................................................#433
67-68 Rear............................................................#555
69-70 Rear............................................................#805
$104.95 ea
$104.95 ea
$104.95 ea
(#819)
69-70
71-73
Pedestal Style; Black Plastic; All;
Boss 302 Style ..........................................#819
Pedestal Style; Black Plastic; All;
Boss 302 Style ..........................................#5231
$190.95 kit
$190.95 kit
Customer Corral
Hello Mustangs Plus,
These are pictures of my 66 Pony Coupe, 200 CID.
Most of all the parts that I have put on it came from
Mustang Plus. Just got it back this week from body and
paint shop!!!!!
I’m still working on it though, so I’ll still be ordering
parts in the future!
Thanks for the great parts and advice.
Hector Pinero
Los Lunas, New Mexico
ORDER ONLINE!
mustangsplus.com
RESTOMOD
HEADQUARTERS
Fiberglass 145
Fiberglass Reproducton Parts For Shelby Mustangs
All parts on these pages are built from hand laid fiberglass and are designed to give you years of enjoyment.
Black fiberglass with gel coat finish; fit and paint to match your Mustang.
Side Scoops
65-70 Instrument Gauge Pod
GT/CS SIDE SCOOPS
(Lower)
(#391)
65-66 All ............................................................. #243
$ 81.95 pr
65-66
69-70
(Lower)
(#3800)
Add a tach and clock to your 65-66 Mustang’s dash and gauges to your 6970 Mustang’s console with this reproduction Shelby component. Mounts
on your dash pad or console, and comes without the holes cut (dash pod
only) out so you can fit in your own choice of instruments!
Dash Pod Instrument Bezel plastic ...... #391
Console Gauge Pod Instrument
Bezel plastic ......................................... #3800
$ 26.95 ea
65-68 PILLAR GAUGE POD LH/RH SET
(Upper)
67-68 Lower; Functional;.....................................#829
67-68 Upper; Functional;.....................................#828
67-68 Lower; Non Functional; .............................#830
$259.95 pr
$259.95 pr
$163.95 pr
(#11500)
(Lower) (#821)
(Upper) (#820)
$ 49.95 ea
69-70 Functional; Convertible; ............................ #821
69-70 Functional; Fastback; ............................... #820
$187.95 pr
$184.95 pr
(#14016)
High quality vacuum formed plastic pillar pod set. Mounts easily. Made
for two gauges (not included).
65-68 Pillar gauge pod set..................................#11500
65-68 Pillar gauge pod set for right hand drive...#14016
$ 62.95 set
$ 71.95 set
Rear Brake Air Duct
66-68
Air Duct Kit .............................................. #822
(#13390)
$ 69.95 kit
69-70 Pillar gauge pod set Coupe ......................#13390
69-70 Pillar gauge pod set Fastback ..................#13391
68 Headlight Bucket
$ 99.95 set
$ 99.95 set
65-66 Fastback Seat Replacement Panel
68
Shelby .......................................................#842
$323.95 pr
69-70 Headlight Bucket
$25.00 Box
Fee Applies
65
66
69-70 Shelby ...................................................... #847
146 Fiberglass
$201.95 pr
w/Spare Tire Mount;
Replaces Trap Door ...................................#241
w/o Spare Tire Mount;
Retains Trap Door ......................................#240
RESTORATION
HEADQUARTERS
$301.95 ea
$301.95 ea
ORDER TOLL FREE!
1-800-999-4289
Fiberglass Reproducton Parts For Shelby Mustangs
67 Nose Section
Fits both GT350 & GT500. Constructed of hand laminated fiberglass, this
reproduction is considerably stronger than the original!
Shipped Truck Freight.
67 Nose Section ............... #834
$15.00 Box
Fee Applies
$496.95 ea
68 Shelby Lower Nose Section
Fits both GT350 & GT500. Manufactured to original specs! Constructed of
hand laminated fiberglass for added strength.
68
Lower............................ #843
$344.95 ea
$15.00 Box
Fee Applies
68 Upper Nose Section
Fits both GT350 & GT500. Manufactured to original specs! Constructed of
hand laminated fiberglass for added strength
68 Upper .............................. #841
$103.95 ea
$15.00 Box
Fee Applies
69-70 Bumper Shroud
A lightweight and durable fiberglass bumper reinforcement shroud.
69-70 ........................................ #845
$ 93.95 ea
$15.00 Box
Fee Applies
69-70 Lower Gravel Shield
Replicated from the original Shelby lower gravel pan. Durable fiberglass
for years of service!
69-70 .................................. #846
$104.95
ea
$15.00 Box
Fee Applies
67 Shelby Tail Lamp Panel
Built from sturdy fiberglass for years of service!
67
GT350/GT500 Use Cougar tail lamps .........#835
$300.95 ea*
*Note: Will also fit 70 Shelby’s only , as these were actually 1969 production cars.
(#835)
68 Shelby Tail Lamp Panel
Whole panel made with abs plastic, buckets moulded into panel
$15.00 Box
68
Fee Applies
Taillamp w/ buckets and gas cap
hole/abs plastic ....................................... #13783 $ 203.95 ea
68 Shelby Tail Lamp Panel
Takes 68-70 Shelby/cougar lens and bezel.
68
$15.00 Box
Fee Applies
GT350/GT500 Does not include
tail lamp housing. .......................................#13450 $219.95 ea
(#13450)
PLEASE NOTE: To be blunt, fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass
body parts are built closer to race car standards than show car standards. We have come to this conclusion after many years of installing and selling
fiberglass body parts from many different manufacturers. Check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have
been sanded or painted they can no longer be sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such
parts. Removal of the stock hood springs and use of lightweight springs and a prop rod is recommended.
ORDER ONLINE!
mustangsplus.com
RESTOMOD
HEADQUARTERS
Fiberglass 147
Fiberglass Parts
1969-70 Scoop For Mach I Hood
Bolt/Mold-On Scoop For GT350 or Mach 1 Hood
Give your Mustang the Shelby or Mach 1 look with a mold-on fiberglass
scoop for your fiberglass or steel hood. Black fiberglass with gel coat
finish. Drilling and modification of your existing hood required during
installation process.
Made to replicate the original, this bolt-on scoop will give your Mustang
the Mach I look.
(#852)
(Front View)
65-66
GT350 Hood Scoop; bolt on ............... #852
$104.95 ea
(Rear View)
69-70
(#7029)
65-66
GT350 Hood Scoop; mold on ............. #7029
$ 89.95
Includes Turn Signal Lenses;
Molded Plastic .......................................#5983
$136.95 ea
ea
Headlamp Covers
Use these to replace your headlights when you take your Mustang to the
track! In black fiberglass with gel coat finish, paint/fit to install.
(#8292)
67-68
GT350 Hood Scoop; mold on ............. #8292
$104.95 ea
(#866)
69-70
Mach I Hood Scoop; bolt on ............... #866
$104.95 ea
65-66
Replaces Headlamps for Racing ........ #3773
$162.95 pr
Other options, such as tires and wheels, seats, steering wheels, engine
and transmission combinations, suspension packages and more can be
chosen to help you build the Roadster of your dreams!
The Ronster was featured on the cover and in a 5 page article in the
September, 1997 issue of Mustang & Fords Magazine. Since then
Mustang owners from all over the world have contacted Mustangs Plus
and asked for information on how to build a Ronster for themselves. The
Ronster Kit, available only through Mustangs Plus, contains all the parts
necessary to convert any 1965 to 1968 Mustang Coupe into this terrific
looking 2-seater Mustang Roadster! After installation of the Ronster
Kit, you can build the rest of the car the way you want to by using our
fiberglass hoods, valances, and trunk lids to get “The Look” you’re after!
148 Fiberglass
RESTORATION
HEADQUARTERS
#8533
ORDER TOLL FREE!
1-800-999-4289
Fiberglass Parts
Fiberglass Fenders
Fiberglass Louvered Fenders
Add classic styling to your Mustang project with these great looking reproductions fenders! In black fiberglass with gel coat finish; fit and paint
to match your Mustang. Shipped truck freight.
(#13447)
$40.00 Box
Fee Applies
(#823)
65-66 Louvered ....................................................#12717 $734.95
65-66 Louvered w/1¼” Flare ................................#13447 $734.95
pr
pr
Fender/Quarter Panel Flares
(#824)
$40.00 Box
Fee Applies
65-66
67-68
69-70
69-70
Stock Style ........................................ #823
Stock Style ........................................ #824
Stock Style ........................................ #825
Shelby Style ...................................... #827
$634.95
$634.95
$634.95
$634.95
$15.00 Box
Fee Applies
pr
pr
pr
pr
Fiberglass Flared Fenders
Comes in black fiberglass with gel coat finish; you will need to fit and paint
to match your Mustang.
MOLD-ON FENDER FLARES
65-66
65-66
67-68
69-70
71-73
65-66
1½” Flare .................................................#857
3¼” Flare .................................................#858
3¼” Flare .................................................#862
3¼” Flare .................................................#864
3¼” Flare .................................................#867
4” Flare ....................................................#859
$288.95
$288.95
$288.95
$288.95
$277.95
$288.95
pr
pr
pr
pr
pr
pr
MOLD-ON QUARTER PANEL FLARES
65-66
65-66
67-70
71-73
65-66
(#853)
(#854)
$40.00 Box
Fee Applies
65-66
65-66
67-68
65-66
1½” Flare ........................................... #853
3¼” Flare ........................................... #854
3¼” Flare ........................................... #856
4” Flare .............................................. #855
ORDER ONLINE!
mustangsplus.com
$634.95
$634.95
$634.95
$634.95
pr
pr
pr
pr
Qtr Panel; 1¼” Flare ................................#1401
Qtr Panel; 3¼” Flare ................................#860
Qtr Panel; 3¼” Flare ................................#865
Qtr Panel; 3¼” Flare ................................#868
Qtr Panel; 4¼” Flare ................................#861
$299.95
$301.95
$301.95
$288.95
$299.95
pr
pr
pr
pr
pr
Need parts or accessories
for your 2005-2009 Mustang
see the
2005-2009 Mustang Section
Or Check Online At
www.mustangsplus.com
RESTOMOD
HEADQUARTERS
Fiberglass 149