CHAMPION forage harvester - Champion

100 years
success through continuity
CHAMPION forage harvester
with row-independent harvesting head
100 years
success through continuity
CHAMPION C 1200 precision forage harvester attachment - row-independent Front-mounted
A specially designed joint
allows the Champion C 1200
to be swivelled into the
required working position.
Centrally adjustable flywheel
with 12 specially profiled
blades, for good chop quality,
integral blade sharpening
device.
Side-mounted
Belt-driven blade rotor, intake
rotor and pre-compression
roller
ensures
optimal
harvesting.
The cracker grating for optimal
kernel processing can easily
be exchanged for the smooth
plate.
Rear-mounted
Hydraulically rotated ejection
chute (140°), double ejection
flap with 12 V servomotor,
manually folded. Mechanically
folding with gas-filled struts
(special equipment).
100 years
success through continuity
CHAMPION C 2200 precision forage harvester - row-independent Front-mounted
The intake drums with their
aggressive teeth ensure the
loss-free intake of the crop
even under extreme operating
conditions.
Champion C 2200, reversing
transmission for rear linkage
and front mounting, for 2
flywheel
wheel
speeds
(860/1160 min-1) for use with
grass and maize.
Rear-mounted
Low-maintenance, chainless
drives on C2200/3000 chopping unit. Forward, reverse and
neutral are electrically selected
from the driver's cab.
Cutting length adjustment (12
lengths) by combination of
4-speed transmission and
number of knives.
With pick up 2 m
Special wear-resistant coating
for chopping blades and
counter blade.
100 years
success through continuity
CHAMPION C 3000 universal precision forage harvester - row-independent
Rear-mounted
With pick up 2 m
With pick up 3 m
NEW
C 3000
Uni Cracker
Metal
detector
(optional
equipment) Magnetic foreign
objects in the crop are
detected, immediately tripping
a safety catch before they are
drawn into the chopper.
Cutting length adjustment (12
lengths) by 4-speed transmission, electrical control console
for operation from driver's cab.
Stepless hydraulic chute rotation
300° with electrically operated
double flap and 12 V servomotor,
spring assisted manual folding.
Optional equipment hydraulic
double flap, hydraulically height
adjustable with access panel, 30
cm higher than standard.
•
•
•
•
•
Wedge-shaped, interlocking cracker rollers
Crushing all maize kernels
Increased throughput and area covered in a day
Optimal utilisation of crop’s nutritional value
Can be retrofitted
100 years
success through continuity
Champion headers with rotary saw
blades.
Row independent harvesting of
maize & other types of crops.
The rotating gathering drums feed
the crop lengthways into the
chopper.
Wide range of applications: Maize,
sorghum, sunflowers, whole crop
silage, oilseed rape, hemp,
pampas-grass, etc.
Standard equipment
Forage harvester C 1200
Forage harvester C 2200
Forage harvester C 3000
• Attachment
FRONT REAR and SIDE ATTACHMENT
Tractor three-point hydraulics Cat. II
Rear or front 3 point linkage with reversing
transmission for two speeds, in maize
1150 rpm and grass 850 rpm, mechanical
side shift, left and right.
Rear 3 point linkage attachment with
height-adjustable support wheels.
• Drive
1000 rpm PTO shaft with friction and
overrun clutch; FRONT or REAR version.
Incorporating a swivelling frame and drive
system via powerband and twin shaft 90’
gearbox.
1000 rpm PTO shaft with overrun clutch.
1000 rpm PTO shaft with overrun clutch.
• Mowing System
High-speed saw blade cutting across the
full width 1.25m with replaceable
segments.
2 high-speed saw blades cutting across
the full width of 2.28m with replaceable
segments.
2 high-speed saw blades cutting across
the full width of 3.00m with replaceble
segments.
• Choppin device
Centrally adjustable flywheel (1180 rpm)
with 12 tungsten carbide-coated blades
specially serrated for Kernel crushing.
Reversible shear bar with hardened
edges. Built-in knife sharpening device,
replaceable chopper housing lining.
Kernel cracking grating.
Centrally adjustable flywheel with 12
tungsten
carbide-coated
blades,
reversible shear bar with hardened edges,
integral knifes sharpening device,
replaceable chopper housing lining chute
liner. Cracker grating for kernel-crushing
and smooth plate.
Centrally adjustable flywheelwith 12
tungsten
carbide-coated
blades,
reversible shear bar with hardened edges,
integral
knife
sharpening
device,
replaceable chopper housing lining and
chute liner, cracker grating for kernel
crushing and smooth plate.
• Intake
Twin intake rollers with aggressive teeth,
one sprung pre-compression roller and
one smooth roller for optimum
compression at the shear bar. Intake and
pre-compression rollers aredriven by oilbath transmission.
Overload protection
The 2 intake and 2 pre-compression
rollers are driven by jointed shafts with
safety
clutch
and
oil-immersed
transmission, 4-speed transmission for 4
intake speeds, electrically operated
forward/neutral/reverse with automatic
de-clutching.
The 2 intake and 2 pre-compression
rollers are driven by jointed shafts with
safety
clutch
and
oil-immersed
transmission, 4-speed transmission for 4
intake speeds, electrically operated
forward/neutral/reverse with automatic
de-clutching.
• Ejection chute
Folding and hydraulically rotating ejection
chute (140°), adjustable ejection double
flap (electrically operated).
Ejection chute rotation via hydraulic
engine and bevel gear system, folding
ejection chute spring-mounted and with
transport detent, double ejection flap
electrically operated.
Hydraulically rotating ejection chute.
Manual spring assisted folding with
transport position, double ejection flap
electrically operated.
• Operation
Electrically operated ejection double flap
and hydraulically operated ejection chute.
Electrically operated gear box and double
ejection flap, hydraulically controlled
ejection chute and hydraulic header lift.
Electrically operated gear box and double
ejection flap, hydraulically controlled
ejectin chute and hydraulic header lift.
• Cutting lengths
Number of blades and changing V-belt
pulley.
Adjustable via 4—speed transmission and
number of cutting blades.
Adjustable via 4-speed transmission and
number of blades.
V-belt pulley Ø
180 mm
210 mm
Blades
12
6
5
10
7,5
15
4
20
30
Tractor connections required:
1 double-acting control valve required on
tractor.
Technical data
Length
Width
Height of working position
Height of transport position
Working width
Power requirement
Weight
PTO speed
Row interval
• Optional equipment
The Champion C 2200/3000 can
be used with a 2.00 m wide grass
pick-up.
High-speed flywheel for the best
chop quality and best feed quality.
m:
m:
m:
m:
m:
kW:
kg:
rpm:
Forage harvester
with header
2,80
1,76
3,95
1,25
50
1100
1000
Row-independent
Support wheel left and right, heightadjustable crop lifter, rigid crop lifters,
mechanically driven crop divider, 2nd.
ejection extension, folding turret with
damping.
Gear:
12 blade mm:
6 blade mm:
4 blade mm:
1.
2.
3.
4,3 5,4 6,5
8,6 10,8 13,0
12,9 16,2 19,5
4.
11
22
33
Gear:
12 blade mm:
6 blade mm:
4 blade mm:
1.
2.
3.
4,3 5,4 6,5
8,6 10,8 13,0
12,9 16,2 19,5
4.
11
22
33
Tractor connections required:
1 double-acting and 1 single acting control
valve.
Tractor connections required:
1 double-acting control valve.
Forage harvester
with header impl.
with pick–up
2,55
2,15
2,35
2,40
4,20
4,20
3,70
3,70
2,28
2,00
80
50
2050
1500
1000
1000
Forage harvester
with header impl. pick-up 2 m pick-up 3 m
2,80
2,15
2,35
3,00
2,60
3,00
4,20
4,20
4,20
3,70
3,70
3,70
3,00
2,00
2,57
100
70
100
2350
1700
2150
1000
1000
1000
Row-independent
harvesting
head,
pick–up,serrated knives, hydraulic side
shift, support wheels, metal detector,
height-adjustable crop lifters, rigid crop
lifters, remote control for front attachment.
Row-independent harvesting head, pick
up,serrated knives, heavy duty PTO shaft,
metal detector, height-adjustable crop
lifters, rigid crop lifters, UniCracker,
central lubricating system, whole crop
divider.
100 years
success through continuity
Genuine Kemper Service Parts
Genuine service parts ensure the perfect operation
of your Kemper harvesting implement.
Maschinenfabrik KEMPER GmbH & Co.KG
Founded 1908, in Stadtlohn, Westfalen, Germany,
development, manufacture and sale of agricultural
machinery, on a site covering 100000 m2, 220
employees. Modern systems and production
plants, serving today's farmers and professional
users.
The KEMPER range of products
• row-independent harvesting implements
with working widths up to 7.5 metres.
• Grass pick up
• row-independent tractor mounted
forage harvesters
• “CornStar“ corn header with rotation intake
• Support wheel
A KEMPER . . . in any case!
Maschinenfabrik KEMPER GmbH & Co.KG · P.O. Box 1352 · D-48694 Stadtlohn, Germany
Telephone +49 (0)2563/88-0 · Fax + 49 (0)2563/8844 and 8898 · E-mail [email protected] · Internet www.kemper-stadtlohn.de
Illustrations and specifications are not binding.
The company