SOUND - Enter Image Motorsport
Transcription
SOUND - Enter Image Motorsport
MORE POWER... MORE CHOICES... MORE SOUND... MOBILE AUDIO STROKER PRO EPIC POWER! COMPETITION SUBWOOFERS The al l-new Stroker Pro Series is a revolutionary dual-spider system design (3 spiders) that’s ready and able to handle an amazing 2500W of power! Improving on the original multi-patented Stoker design, the Stroker Pro adds a second spider system (in addition to the dual-spiders in the lower system) for stability in high excursion situations and provides an amazing 3 inches of peak to peak excursion in a ”High-Q” enclosure. Stroker Pro 15"/ 12" Dual 2 ohm Voice Coil Subwoofer • A Reincarnation of the legendary Stroker Woofer • Adjustable Voice Coil Bias System • Integrated Voice Coil Heat Sinking and Flux Modulation Ring • Dual Gap Motor System • Field Replaceable Cone/Coil Assembly • Enhanced Piston Area/Frame Design • Spider Clamping Ring with Integrated Terminals • Extremely High Excursion and SPL Capability Stroker Pro-15 Stroker Pro-12 • Power Handling RMS: 2500 Watts • Frequency Response: 20-300 Hz • Sensitivity: 82 dB • Power Handling RMS: 2500 Watts • Frequency Response: 20-300 Hz • Sensitivity: 85 dB 15" Dual 2 ohm Voice Coil Subwoofer 12" Dual 2 ohm Voice Coil Subwoofer The axial surround system includes a removable spider tower and upper spider cylinder with access to alignment holes in the back plate. This allows the system to be easily replaced in the field. The axial edge also permits the cone assembly to be repaired onsite without the use of glue. F o r c o m p l e t e s p e c i f i c a t i o n s v i s i t w w w. c e r w i n - v e g a . c o m Stroker-102 10" Dual 2 ohm Voice Coil Subwoofer • Power Handling RMS: 2000 Watts • Frequency Response: 20-300 Hz • Sensitivity: 84 dB 1w/1m Stroker-104 - Same as above with Dual 4 ohm Voice Coils Stroker-122 12" Dual 2 ohm Voice Coil Subwoofer • Power Handling RMS: 2000 Watts • Frequency Response: 20-300 Hz • Sensitivity: 86 dB 1w/1m Stroker-124 - Same as above with Dual 4 ohm Voice Coils Stroker-152 15" Dual 2 ohm Voice Coil Subwoofer • Power Handling RMS: 2000 Watts • Frequency Response: 20-300 Hz • Sensitivity: 86.3 dB 1w/1m Stroker-154 - Same as above with Dual 4 ohm Voice Coils The all-new Stroker Series is a revolutionary dual-spider design and is the most advanced subwoofer available today in its class. Offering new design technologies and materials, the series includes 10- inch, 12- inch and 15-inch models. The new Stroker exemplifies the tradition of the original legendary Stroker series. Its dual spider design maintains linearity and stabilizes the speaker in extreme excursion conditions. The new Stroker epitomizes high-output, high-performance subwoofers and has a linear operating range to an incredible 29mm in each direction. The Stroker can handle an amazing 2000 watts of power and provides more than two inches of peak – peak excursion when loaded into a “High-Q” enclosure. Because of this extreme power capacity, a unique aluminum basket was designed to increase efficiency and thermal power handling while also reducing thermal compression. The voice coil is placed directly next to an aluminum heat sink that is integrated into the basket. The basket design employs external heatsinking to dissipate heat that is pulled away from the coil into the enclosure and away from the coil itself. In a sealed enclosure, this reduces the internal ambient heat by as much as 50%. Another technology breakthrough is the unique motor geometry, which allows extremely high excursions with shorter voice coils than conventional designs. This results in a woofer with extremely high SPL capability as well as high sensitivity with superior accuracy. As with Stroker Pro, Stroker can be on-site repaired with minimal effort and without the use of glue or set times. M O B I L E A U D I O V-MAX Component Group: Designed for direct drop-in replacement in OEM speaker locations, V-Max is the right choice for a componentquality performance upgrade. V-Max Component Group: V- M ax sets a new standard for high performance component systems. V-Max components feature low frequency drivers with die-cast frames, woven tinsel leads, a symmetrically-shaped magnetic field in addition to a shallow mounting depth. The tweeters feature a damped titanium dome, a shaped neodymium m a g n e t structure, and multiple mounting options. These options include the ability to mount in the ce nter of the low frequency driver to become a high end unified component system (coaxial mounting). V-Max 1.0 V-Max 5 V-Max 65 • Power Handling (RMS): 100W • Frequency Response: (+/- 3dB) 4kHz-20kHz • Sensitivity: (1W/1M):90dB • Power Handling: (RMS) 100W • Frequency Response: (+/- 3dB) 55Hz-20Hz • Sensitivity: (1W/1M) 89dB • Ultra High Efficiency 25mm Titanium Composite Dome Tweeter • Pressed Carbon Graphite Cone • 3rd Order Symmetrical External Bi-Wirable Crossover • Convertible to either Component or Co-Axial System • Power Handling: (RMS) 100W • Frequency Response: (+/- 3dB) 50Hz-20Hz • Sensitivity: (1W/1M) 90dB • Ultra High Efficiency 25mm Titanium Composite Dome Tweeter • Pressed Carbon Graphite Cone • 3rd Order Symmetrical External Bi-Wirable Crossover • Convertible to either Component or Co-Axial System V-Max Subwoofers: V-Max Subwoofers: High performance Billet look cone woofers designed to fill your car with legendary Cerwin-Vega Bass! Vega-Maximum Throw Suspension; Rugged Die-cast Aluminum Frame; Dual spider design with stitched tinsel leads; Stroker™ technology voice coil with PEI wire (600WRMS); powerful Double Stack Magnet Assembly; billet aluminum-look cone with chrome-look “C-V ” logo. Each V-Max design is available in Dual (DVC) Voice Coil configuration with either dual 2 or dual 4 ohm coils. Each is designed for small sealed or vented enclosures. Vmx 10.2/10.4 Vmx 12.2/12.4 Vmx 15.2/15.4 • Power Handling (RMS): 600 Watts • Frequency Response (+/- 3dB): 20Hz - 500Hz • Sensitivity (2.83V/1M): 86.1 dB • Power Handling (RMS): 600 Watts • Frequency Response (+/- 3dB): 20Hz - 500Hz • Sensitivity (2.83V/1M): 86.8 dB • Power Handling (RMS): 600 Watts • Frequency Response (+/- 3dB): 20Hz - 500Hz • Sensitivity (2.83V/1M): 87.3 dB HED Unified Components: Designed to deliver incredibly accurate sound reproduction with drop-in ease of installation. HED HED 4 HED 5 HED 6 HED 65 • Power Handling (RMS): 30 Watts • Frequency Response (+/- 3dB): 55Hz-20KHz • Power Handling (RMS): 40 Watts • Frequency Response (+/- 3dB): 40Hz-20KHz • Power Handling (RMS): 40 Watts • Frequency Response (+/- 3dB): 40Hz-20KHz • Power Handling (RMS): 50 Watts • Frequency Response (+/- 3dB): 35Hz-20KHz HED 46 • Power Handling (RMS): 35 Watts • Frequency Response (+/- 3dB): 50Hz-20KHz HED 57 HED 69 • Power Handling (RMS): 50 Watts • Frequency Response (+/- 3dB): 35Hz-20KHz • Power Handling (RMS): 60 Watts • Frequency Response (+/- 3dB): 30Hz-20KHz The HED line uses the hottest new technology to provide unparalleled performance in a “drop-in” speaker system. Each system is designed to conveniently retrofit into preexisting factory locations with flexible mounting options. HED utilizes state of the art design to create a sound often outperforming speaker systems costing two to three times more! HED offers a cost effective way to upgrade to world class Cerwin-Vega performance. HED Subwoofers HED Subwoofers: Cerwin-Vega! Performance at an attractive price point! HED 8.2/8.4 HED 10.2/10.4 HED 12.2/12.4 HED 15.2/15.4 • Power Handling (RMS): 200 Watts • Frequency Response (+/- 3dB): 20Hz - 500Hz • Power Handling (RMS): 200 Watts • Frequency Response (+/- 3dB): 20Hz - 500Hz • Power Handling (RMS): 300 Watts • Frequency Response (+/- 3dB): 20Hz - 500Hz • Power Handling (RMS): 300 Watts • Frequency Response (+/- 3dB): 20Hz - 500Hz HED is redesigned from the ground up and continues the legacy of this highly respected line. These new subwoofers are designed to operate in small sealed and small vented enclosures and feature the same Stroker™ technology used throughout the line of C-V woofers. Couple this with stitched tinsel leads, a flat progressive-rate spider design and spider-plateau venting and you have a new generation of subwoofers that rival the sound quality and output of competitors costing twice as much! M O B I L E F o r c o m p l e t e s p e c i f i c a t i o n s v i s i t w w w. c e r w i n - v e g a . c o m A U D I O The EXL Series: EXL amplifiers use a MOSFET power supply coupled with bipolar output transistors for superior control of signal throughout the amplification process. Careful attention to symmetrical signal paths in the circuit design keeps RFI at low levels. Low RFI means more music with less background noise! Transparent protection circuits safeguard the EXL amplifier in the most demanding applications. All connections are terminal style connections and the controls feature calibrated controls for easy adjustment. EXL amplifiers will surpass the CEA 2006 rating standard and each is fully tested before they leave the factory, insuring they will perform to our stringent standards after they’re installed. Whether you are using the EXL 400.4 for your whole system amplification, or using our awesome EXL1200D to drive our Strokers™, EXL amplifiers are sure to provide you with the performance you expect from Cerwin-Vega! These three feature - packed mobile amplifiers offer the latest technologies in circuit design as well as the performance that today’s mobile audio enthusiast demands. EXL 350 EXL 400 EXL 1200D • 2 x 175 Watts into 2 ohms @ less than 0.1% THD • 2 x 110 Watts into 4 ohms @ less than 0.1% THD • 4 x 100 Watts into 2 ohms @ less than 0.1% THD • 4 x 60 Watts into 4 ohms @ less than 0.1% THD • 1200 Watts Mono into 1 ohm @ less than 0.1% THD • Stackable Capability The XL Series: These five feature - packed mobile amplifiers offer the latest technologies in circuit design at a price that is guaranteed to please today’s mobile audio enthusiast. XL amplifiers use the same technology as the EXL amplifiers in the power supply and output stage. Careful attention is given to the design as to be cost effective without giving up the performance you expect from Cerwin-Vega! The XL amplifier line features two, 2-channel amplifiers, one, 4-channel model and two, 2-Ohm mono block “stackable” models. The mono block versions are class AB and class H for superior sound quality. The XL 600.1 utilizes a class H design for AB sound quality with the efficiency of a class D! Again, as with EXL , all XL models are individually tested before leaving the factory. XL 150.2 XL 300.1 XL 300.2 • 2 x 75 Watts into 2 ohms • 300 Watts Mono into • 2 x 150 Watts into 2 ohms @ less than 0.1% THD 2 ohms @ less than 1% THD @ less than 0.1% THD • 2 x 50 Watts into 4 ohms • “Stackable” Class AB design • 2 x 105 Watts into 4 ohms @ less than 0.1% THD @ less than 0.1% THD XL 300.4 XL 600.1 • 4 x 75 Watts into 2 ohms @ less than 0.1% THD • 4 x 50 Watts into 4 ohms @ less than 0.1% THD • 600 Watts Mono into 2 ohms @ less than 1% THD • “Stackable” Class H design F o r c o m p l e t e s p e c i f i c a t i o n s v i s i t w w w. c e r w i n - v e g a . c o m STROKERPRO Description 12" Subwoofer V-MAX STROKER 15" Subwoofer Stroker 102/4 Stroker 122/4 Stroker 152/4 10" Subwoofer 12" Subwoofer 15" Subwoofer Frequency Response Frequency Response 20-300Hz 20-300Hz 20-300Hz 20-300Hz 20-300Hz Power Handling RMS 2500 Watts 2500 Watts 2000 Watts 2000 Watts 2000 Watts 82 dB 85 dB 81.9/82.3 dB 84 dB 86/86.3 dB Nominal Impedance Dual 2 ohms Dual 2 ohms Dual 2/4 ohms Dual 2/4 ohms Dual 2/4 ohms Voice Coil Diameter 4" 4" 3" 3" 3" 9 1/2" (24.13 cm) 7" (17.78 cm) 30lbs (66kg) 0.20 ft3/5.66 liters 11" (27.94 cm) 8" (20.32 cm) 33lbs (72.6kg) 0.24 ft3/6.8 liters 14" (35.68 cm) 9" (22.86 cm) 34lbs (78.4kg) 0.30 ft3/8.5 liters Sensitivity model Description 11" (27.94 cm) 14" (35.56 cm) 9" (22.86 cm) 11" (27.94 cm) 74 lbs. (33.56 kg) 79 lbs. (35.83 kg) 0.35 ft3/ 9.9 liters 0.52 ft3/ 14.7 liters V-Max 5 V-Max 65 VMx 10.2/10.4 VMx 12.2/12.4 VMx 15.2/15.4 Tweeter 5 1/4" 2-Way 6 1/2" 2-Way 10” Subwoofer 12” Subwoofer 15” Subwoofer 3KHz-20KHz 50Hz-20KHz 40Hz-20KHz 20Hz-500Hz 20Hz-500Hz 20Hz-500Hz 50 Watts 100 Watts 100 Watts 600 Watts 600 Watts 600 Watts 91dB 90dB 91dB 86.1/86.2 dB 86.8/87.2 dB 87.3/87.8 dB 4 ohms 4 ohms 4 ohms 2/4 ohms 2/4 ohms 2/4 ohms 2.5" 2.5" Power Handling RMS Sensitivity Nominal Impedance Voice Coil Diameter Dimensions Mounting Diameter Depth Total Weight Spkr Displacement V-Max 1.0 Dimensions 2" (50mm) 3/4" (19mm) Mounting Diameter Mounting Depth Spkr Displacement 4 1/2" (114mm) 5" (127mm) 9-1/4" (235mm) 11-5/32" (283mm) 14-3/32" (358mm) 2" (52mm) 2 1/2" (63.5mm) 5-5/8" (143mm) 6" (152.4mm) 7-1/8" (181mm) .09 cu.Ft./2.5 liters 0.13 cu.Ft./3.7 liters 0.22 cu.Ft./6.2 liters HED SUBWOOFERS HED UNIFIED COMPONENTS model 2.5" HED 4 HED 46 HED 5 HED 6 HED 6.5 HED 57 HED 69 model HED 8.2/8.4 HED 10.2/10.4 HED 12.2/12.4 HED 15.2/15.4 4" 2-way 4x6" 2-way 5-1/4" 2-way 6" 2-way 6-1/2" 2-way 5x7" 2-way 6x9" 2-way Description 8" Subwoofer 10" Subwoofer 12" Subwoofer 15" Subwoofer 55Hz-20KHz 50Hz-20KHz 40Hz-20KHz 40Hz-20KHz 35Hz-20KHz 35Hz-20KHz 30Hz-20KHz Frequency Response 20Hz-500Hz 20Hz-500Hz 20Hz-500Hz 20Hz-500Hz 30 Watts 35 Watts 40 Watts 40 Watts 50 Watts 50 Watts 60Watts RMS 200 Watts 200 Watts 300 Watts 300 Watts Sensitivity 86 dB 85.8 dB 87.1 dB 88.6 dB 88.6 dB 89.9 dB 90.3 dB Sensitivity 91/89 dB 91/89 dB 92/90 dB 92/90 dB Impedance 4 ohms 4 ohms 4 ohms 4 ohms 4 ohms 4 ohms 4 ohms Nominal Impedance Dual 2/4 ohms Dual 2/4 ohms Dual 2/4 ohms Dual 2/4 ohms Voice Coil Diameter 1.5" (38mm) 1.5" (38mm) 2" (50mm) 2" (50mm) 7-5/16" (185.5mm) 5" (127mm) 9" (228mm) 5-5/8" (143mm) 11-1/16" (281mm) 6-1/2" (165mm) 13-13/16" (350mm) 7-1/2" (190mm) 0.042 ft3 /1.2 liters 0.059 ft3 /1.7 liters 0.094 ft3 /2.7 liters 0.15 ft3 /4.1 liters Description Frequency Response Power Handling MAX Power Handling Dimensions Mounting Diameter Mounting Depth Width Height 3-11/16" (94mm) n/a 4-1/2" (114mm) 2" (52mm) 2" (52mm) 2-1/4" (57mm) n/a 5-7/8" (150mm) n/a n/a 4-1/2/114" (114.3mm) n/a 5" (127mm) 5-1/2"/5"(139/127mm) n/a n/a 2-3/16" (56mm) 2-5/16" (59mm) 2-1/44" (57.7mm) 2-7/8" (73.2mm) n/a n/a 7-1/4" (184mm) 8-3/4" (222mm) n/a n/a 5" (127mm) 6-1/16" (154mm) Dimensions Mounting Diameter Mounting Depth Spkr. Displacement XL AMPLIFIERS EXL AMPLIFIERS model General Description EXL 350.2 EXL 400.4 EXL 1200D 2 Channel Amp 4 Channel amp Mono Class D Amp • 4 x 100 watts into 2 ohms @ less than 0.1% THD • 4 x 60 watts into 4 ohms @ less than 0.1% THD • Vega Bass! Boost Control • High Current MOSFET Power Supply • Audiophile Class A/B Bipolar Output Stage • Durable Mil Spec Glass Epoxy pcb • Audiophile Grade Audio Components in Signal Path • Variable 12dB/oct Highpass -Lowpass Crossover • 1200 watts Mono into 1ohm @ less than 1% THD • Vega Bass! Boost Control • High Current MOSFET Power Supply • Durable Mil Spec Glass Epoxy pcb • "Stackable" Capability • Variable 12dB/oct Highpass -Lowpass Crossover • Remote Low-Pass Level Control 13.25" x 9.5" x 2.5" 15" x 9.5" x 2.5" 18.25" x 9.5" x 2.5" (33.66cm x 24.13cm x3.25cm) (38.1 cm x 24.13 cm x 3.25 cm) (47 cm x 24.13 cm x 3.25 cm) 7.32 lbs (3.32 kg) 8.18 lbs (3.71 kg) 12.82 lbs (5.85 kg) • 2 x 175 watts into 2ohms @ less than 0.1% THD • 2 x 110 watts into 4 ohms @ less than 0.1% THD • VegaBass! Boost Control • High Current MOSFET Power Supply • Audiophile Class A/B Bipolar Output Stage • Durable Mil Spec Glass Epoxy pcb • Audiophile Grade Audio Components in Signal Path • Variable 12dB oct Highpass - Lowpass Crossover Dimensions Weight model XL 150.2 XL 300.1 • 1 x 150 watts into 4 ohms @ less than 0.1% THD @ less than 0.1% THD • 1 x 300 watts into 2 ohms • 2 x 50 watts into 4 ohms @ less than 0.1% THD @ less than 0.1% THD • Vega Bass! Boost Control • Vega Bass! Boost Control • High Current MOSFET • High Current MOSFET Power Supply Power Supply • Audiophile Class A/B Bipolar • Audiophile Class A/B Bipolar Output Stage Output Stage • Variable 12dB/oct Highpass • Variable 12dB/oct Highpass -Lowpass Crossover -Lowpass Crossover • High Level Speaker Inputs • "Stackable" Capability • Thermal and Overload • Thermal and Overload Protection Protection General Description • 2 x 75 watts into 2 ohms Dimensions 11" x 10.5" x 2.25" (27.94 cm x 26.67 cm x 5.72 cm) Weight 5.88 lbs (2.67 kg) 11" x 10.5" x 2.25" XL 300.2 • 2 x 150 watts into 2 ohms @ less than 0.1% THD • 2 x 105 watts into 4 ohms @ less than 0.1% THD • Vega Bass! Boost Control • High Current MOSFET Power Supply • Audiophile Class A/B Bipolar Output Stage • Variable 12dB/oct Highpass -Lowpass Crossover • High Level Speaker Inputs • Thermal and Overload Protection 13.25" x 10.5" x 2.25" XL 300.4 • 4 x 75 watts into 2 ohms @ less than 0.1% THD • 4 x 50 watts into 4 ohms @ less than 0.1% THD • Vega Bass! Boost Control • High Current MOSFET Power Supply • Audiophile Class A/B Bipolar Output Stage • Variable 12dB/oct Highpass -Lowpass Crossover • High Level Speaker Inputs • Thermal and Overload Protection 13.25" x 10.5" x 2.25" XL 600.1 • 600 watts Mono into 2 ohm @ less than 1% THD • Vega Bass! Boost Control • High Current MOSFET Power Supply • Variable 12dB/oct Highpass -Lowpass Crossover • High Level Speaker Inputs • Thermal and Overload Protection • Remote Lowpass Level Control 17.5" x 10.5" x 2.25" (27.94 cm x 26.67 cm x 5.72 (33.66 cm x 26.67 cm x 5.72 cm) (33.66 cm x 26.67 cm x 5.72 cm) (44.5 cm x 26.67 cm x 5.72 cm) 7.26 lbs (3.29 kg) 7.26 lbs (3.29 kg) 7.5 lbs (3.4 kg) 8.5 lbs (3.86 kg) MO O BB II LL EE AA UU DD II OO M Don’t just Expect More... GET MORE! The history of Cerwin-Vega! is a legacy of high performance breakthroughs that spans more than half a century. Over that time, Cerwin-Vega! has introduced hundreds of innovative and award winning designs that have advanced the state of the art for loudspeaker products ranging from the stage to the home and car. The tradition continues to this day. Cerwin-Vega! continues to drive technology forward to bring you innovative products ranging from the multi-patented Stroker Pro™ to the affordable HED™. Cerwin-Vega! will continue to develop new technologies to bring products to market that create a listening experience commensurate with over 50 years of innovative design. When a brand chooses excellence as its goal, amazing things begin to happen. The latest examples of this fact are on display for you in this brochure. Choose Stroker Pro or Stroker, the most advanced competition subwoofers available in mobile audio. Opt for V-Max subwoofers, offering value and performance unavailable from any other brand. Or choose from our HED Series of Subwoofers and Unified Components. You can also power your system with EXL or XL, our two complete lines of performance-driven amplifiers. Whatever you want, Cerwin-Vega! has a product that’s just right for your application and budget. We invite you to experience the sound that’s been disturbing the peace for over 50 years—Cerwin-Vega!. The long and winding road has never sounded so good. For more information, visit us at www.cerwin-vega.com. MO B I L E AU D I O USA: Cerwin-Vega!, Inc. • 9340 De Soto Ave. • Chatsworth, CA • 91311 ©2005 Cerwin-Vega Phone: 1-818-534-1500 • Fax: 1-818-534-1590 • Cerwin-Vega! is a division of the Stanton Group Cerwin-Vega! reserves the right to make changes to product specifications and design at any time F150 on front cover provided courtesy Sergio and
Similar documents
SOUND - Cerwin Vega
• Dual Gap Motor System • Field Replaceable Cone/Coil Assembly • Enhanced Piston Area/Frame Design • Spider Clamping Ring with Integrated
More information