SOUND - Cerwin Vega

cv_mobile_brochure
8/31/05
8:58 AM
Page 1
MORE POWER... MORE CHOICES... MORE SOUND...
MOBILE
AUDIO
cv_mobile_brochure
8/31/05
8:58 AM
Page 2
STROKER PRO
EPIC POWER!
COMPETITION SUBWOOFERS
The al l-new Stroker Pro Series is a
revolutionary dual-spider system design
(3 spiders) that’s ready and able to handle
an amazing 2500W of power! Improving on
the original multi-patented Stoker design, the
Stroker Pro adds a second spider system
(in addition to the dual-spiders in the
lower system) for stability in high excursion
situations and provides an amazing 3 inches
of peak to peak excursion in a ”High-Q”
enclosure.
Stroker Pro
15"/ 12" Dual 2 ohm Voice Coil Subwoofer
• A Reincarnation of the legendary Stroker
Woofer
• Adjustable Voice Coil Bias System
• Integrated Voice Coil Heat Sinking and Flux
Modulation Ring
• Dual Gap Motor System
• Field Replaceable Cone/Coil Assembly
• Enhanced Piston Area/Frame Design
• Spider Clamping Ring with Integrated
Terminals
• Extremely High Excursion and SPL Capability
Stroker Pro-15
Stroker Pro-12
• Power Handling RMS: 2500 Watts
• Frequency Response: 20-300 Hz
• Sensitivity: 85 dB
• Power Handling RMS: 2500 Watts
• Frequency Response: 20-300 Hz
• Sensitivity: 82 dB
15" Dual 2 ohm Voice Coil Subwoofer
12" Dual 2 ohm Voice Coil Subwoofer
The axial surround system includes a removable
spider tower and upper spider cylinder with access to
alignment holes in the
back plate. This allows
the system to be easily
replaced in the field. The
axial edge also permits
the cone assembly to be
repaired onsite without
the use of glue.
F o r c o m p l e t e s p e c i f i c a t i o n s v i s i t w w w. c e r w i n - v e g a . c o m
cv_mobile_brochure
8/31/05
8:58 AM
Page 3
Stroker-102
10" Dual 2 ohm Voice Coil Subwoofer
• Power Handling RMS: 2000 Watts
• Frequency Response: 20-300 Hz
• Sensitivity: 84 dB 1w/1m
Stroker-104 - Same as above with
Dual 4 ohm Voice Coils
Stroker-122
12" Dual 2 ohm Voice Coil Subwoofer
• Power Handling RMS: 2000 Watts
• Frequency Response: 20-300 Hz
• Sensitivity: 86 dB 1w/1m
Stroker-124 - Same as above with
Dual 4 ohm Voice Coils
Stroker-152
15" Dual 2 ohm Voice Coil Subwoofer
• Power Handling RMS: 2000 Watts
• Frequency Response: 20-300 Hz
• Sensitivity: 86.3 dB 1w/1m
Stroker-154 - Same as above with
Dual 4 ohm Voice Coils
The all-new Stroker Series is a revolutionary
dual-spider design and is the most advanced
subwoofer available today in its class. Offering
new design technologies and materials, the
series includes 10- inch, 12- inch and 15-inch
models.
The new Stroker exemplifies the tradition of
the original legendary Stroker series. Its dual
spider design maintains linearity and stabilizes
the speaker in extreme excursion conditions.
The new Stroker epitomizes high-output,
high-performance subwoofers and has a linear
operating range to an incredible 29mm in
each direction.
The Stroker can handle an amazing 2000
watts of power and provides more than two
inches of peak – peak excursion when loaded
into a “High-Q” enclosure. Because of this
extreme power capacity, a unique aluminum
basket was designed to increase efficiency
and thermal power handling while also
reducing thermal compression. The voice coil
is placed directly next to an aluminum heat
sink that is integrated into the basket.
The basket design employs external heatsinking to dissipate heat that is pulled away
from the coil into the enclosure and away
from the coil itself. In a sealed enclosure,
this reduces the internal ambient heat by as
much as 50%. Another technology breakthrough is the unique motor geometry,
which allows extremely high excursions with
shorter voice coils than conventional designs.
This results in a woofer with extremely high
SPL capability as well as high sensitivity with
superior accuracy. As with Stroker Pro, Stroker
can be on-site repaired with minimal effort
and without the use of glue or set times.
M O B I L E
A U D I O
cv_mobile_brochure
8/31/05
8:58 AM
Page 4
V-MAX Component Group:
Designed for direct drop-in replacement in OEM speaker locations, V-Max is the right choice for a componentquality performance upgrade.
V-Max Component Group:
V- M ax sets a new standard for high
performance component systems. V-Max
components feature low frequency drivers
with die-cast frames, woven tinsel leads,
a symmetrically-shaped magnetic field
in addition to a shallow mounting depth.
The tweeters feature a damped titanium
dome, a shaped neodymium m a g n e t
structure, and multiple mounting
options. These options include the ability
to mount in the ce nter of the low
frequency driver to become a high end
unified component system (coaxial mounting).
V-Max 1.0
V-Max 5
V-Max 65
• Power Handling (RMS): 100W
• Frequency Response: (+/- 3dB)
4kHz-20kHz
• Sensitivity: (1W/1M):90dB
• Power Handling: (RMS) 100W
• Frequency Response: (+/- 3dB) 55Hz-20Hz
• Sensitivity: (1W/1M) 89dB
• Ultra High Efficiency 25mm Titanium Composite Dome Tweeter
• Pressed Carbon Graphite Cone
• 3rd Order Symmetrical External Bi-Wirable Crossover
• Convertible to either Component or Co-Axial System
• Power Handling: (RMS) 100W
• Frequency Response: (+/- 3dB) 50Hz-20Hz
• Sensitivity: (1W/1M) 90dB
• Ultra High Efficiency 25mm Titanium Composite Dome Tweeter
• Pressed Carbon Graphite Cone
• 3rd Order Symmetrical External Bi-Wirable Crossover
• Convertible to either Component or Co-Axial System
V-Max Subwoofers:
V-Max Subwoofers:
High performance Billet look cone woofers designed to fill your car with legendary Cerwin-Vega Bass!
Vega-Maximum Throw Suspension;
Rugged Die-cast Aluminum Frame; Dual
spider design with stitched tinsel leads;
Stroker™ technology voice coil with PEI wire
(600WRMS); powerful Double Stack Magnet
Assembly; billet aluminum-look cone with
chrome-look “C-V ” logo.
Each V-Max design is available in Dual (DVC)
Voice Coil configuration with either dual 2 or
dual 4 ohm coils. Each is designed for small
sealed or vented enclosures.
V-Max 10.2/10.4
V-Max 12.2/12.4
V-Max 15.2/15.4
• Power Handling (RMS): 600 Watts
• Frequency Response (+/- 3dB):
20Hz - 500Hz
• Sensitivity (2.83V/1M): 86.1 dB
• Power Handling (RMS): 600 Watts
• Frequency Response (+/- 3dB):
20Hz - 500Hz
• Sensitivity (2.83V/1M): 86.8 dB
• Power Handling (RMS): 600 Watts
• Frequency Response (+/- 3dB):
20Hz - 500Hz
• Sensitivity (2.83V/1M): 87.3 dB
cv_mobile_brochure
8/31/05
8:59 AM
Page 5
HED Unified Components:
Designed to deliver incredibly accurate sound reproduction with drop-in ease of installation.
HED
HED 4
HED 5
HED 6
HED 65
• Power Handling (RMS): 30 Watts
• Frequency Response (+/- 3dB):
55Hz-20KHz
• Power Handling (RMS): 40 Watts
• Frequency Response (+/- 3dB):
40Hz-20KHz
• Power Handling (RMS): 40 Watts
• Frequency Response (+/- 3dB):
40Hz-20KHz
• Power Handling (RMS): 50 Watts
• Frequency Response (+/- 3dB):
35Hz-20KHz
HED 46
• Power Handling (RMS): 35 Watts
• Frequency Response (+/- 3dB):
50Hz-20KHz
HED 57
HED 69
• Power Handling (RMS): 50 Watts
• Frequency Response (+/- 3dB):
35Hz-20KHz
• Power Handling (RMS): 60 Watts
• Frequency Response (+/- 3dB):
30Hz-20KHz
The HED line uses the hottest new technology
to provide unparalleled performance in a
“drop-in” speaker system.
Each system is designed to conveniently
retrofit into preexisting factory locations
with flexible mounting options. HED utilizes
state of the art design to create a sound
often outperforming speaker systems costing
two to three times more! HED offers a cost
effective way to upgrade to world class
Cerwin-Vega performance.
HED Subwoofers
HED Subwoofers:
Cerwin-Vega! Performance at an attractive price point!
HED 8.2/8.4
HED 10.2/10.4
HED 12.2/12.4
HED 15.2/15.4
• Power Handling (RMS): 200 Watts
• Frequency Response (+/- 3dB):
20Hz - 500Hz
• Power Handling (RMS): 200 Watts
• Frequency Response (+/- 3dB):
20Hz - 500Hz
• Power Handling (RMS): 300 Watts
• Frequency Response (+/- 3dB): 20Hz
- 500Hz
• Power Handling (RMS): 300 Watts
• Frequency Response (+/- 3dB):
20Hz - 500Hz
HED is redesigned from the ground up and
continues the legacy of this highly respected
line. These new subwoofers are designed to
operate in small sealed and small vented
enclosures and feature the same Stroker™
technology used throughout the line of C-V
woofers. Couple this with stitched tinsel
leads, a flat progressive-rate spider design
and spider-plateau venting and you have a
new generation of subwoofers that rival the
sound quality and output of competitors
costing twice as much!
M O B I L E
F o r c o m p l e t e s p e c i f i c a t i o n s v i s i t w w w. c e r w i n - v e g a . c o m
A U D I O
cv_mobile_brochure
8/31/05
8:59 AM
Page 6
The EXL Series:
EXL amplifiers use a MOSFET power supply
coupled with bipolar output transistors for
superior control of signal throughout the amplification process. Careful attention to symmetrical
signal paths in the circuit design keeps RFI at
low levels. Low RFI means more music with
less background noise! Transparent protection
circuits safeguard the EXL amplifier in the most
demanding applications. All connections are
terminal style connections and the controls
feature calibrated controls for easy adjustment.
EXL amplifiers will surpass the CEA 2006 rating
standard and each is fully tested before they
leave the factory, insuring they will perform to
our stringent standards after they’re installed.
Whether you are using the EXL 400.4 for your
whole system amplification, or using our
awesome EXL1200D to drive our Strokers™,
EXL amplifiers are sure to provide you with the
performance you expect from Cerwin-Vega!
These three feature - packed mobile amplifiers offer the latest technologies in circuit design as well as the
performance that today’s mobile audio enthusiast demands.
EXL 350.2
EXL 400.4
EXL 1200D
• 2 x 175 Watts into 2 ohms
@ less than 0.1% THD
• 2 x 110 Watts into 4 ohms
@ less than 0.1% THD
• 4 x 100 Watts into 2 ohms
@ less than 0.1% THD
• 4 x 60 Watts into 4 ohms
@ less than 0.1% THD
• 1200 Watts Mono into 1 ohm
@ less than 0.1% THD
• Stackable Capability
The XL Series:
These five feature - packed mobile amplifiers offer the latest technologies in circuit design at a price that is
guaranteed to please today’s mobile audio enthusiast.
XL amplifiers use the same technology as the
EXL amplifiers in the power supply and output
stage. Careful attention is given to the design
as to be cost effective without giving up the
performance you expect from Cerwin-Vega!
The XL amplifier line features two, 2-channel
amplifiers, one, 4-channel model and two,
2-Ohm mono block “stackable” models.
The mono block versions are class AB and
class H for superior sound quality. The XL
600.1 utilizes a class H design for AB sound
quality with the efficiency of a class D!
Again, as with EXL , all XL models are
individually tested before leaving the factory.
XL 150.2
XL 300.1
XL 300.2
• 2 x 75 Watts into 2 ohms • 300 Watts Mono into
• 2 x 150 Watts into 2 ohms
@ less than 0.1% THD
2 ohms @ less than 1% THD @ less than 0.1% THD
• 2 x 50 Watts into 4 ohms • “Stackable” Class AB design • 2 x 105 Watts into 4 ohms
@ less than 0.1% THD
@ less than 0.1% THD
XL 300.4
XL 600.1
• 4 x 75 Watts into 2 ohms
@ less than 0.1% THD
• 4 x 50 Watts into 4 ohms
@ less than 0.1% THD
• 600 Watts Mono into
2 ohms @ less than 1% THD
• “Stackable” Class H design
F o r c o m p l e t e s p e c i f i c a t i o n s v i s i t w w w. c e r w i n - v e g a . c o m
cv_mobile_brochure
8/31/05
8:59 AM
Page 7
STROKERPRO
Description
12" Subwoofer
V-MAX
STROKER
15" Subwoofer
Stroker 102/4
Stroker 122/4
Stroker 152/4
10" Subwoofer
12" Subwoofer
15" Subwoofer
Frequency Response
Frequency Response
20-300Hz
20-300Hz
20-300Hz
20-300Hz
20-300Hz
Power Handling RMS
2500 Watts
2500 Watts
2000 Watts
2000 Watts
2000 Watts
82 dB
85 dB
81.9/82.3 dB
84 dB
86/86.3 dB
Nominal Impedance
Dual 2 ohms
Dual 2 ohms
Dual 2/4 ohms
Dual 2/4 ohms
Dual 2/4 ohms
Voice Coil Diameter
4"
4"
3"
3"
3"
9 1/2" (24.13 cm)
7" (17.78 cm)
30lbs (66kg)
0.20 ft3/5.66 liters
11" (27.94 cm)
8" (20.32 cm)
33lbs (72.6kg)
0.24 ft3/6.8 liters
14" (35.68 cm)
9" (22.86 cm)
34lbs (78.4kg)
0.30 ft3/8.5 liters
Sensitivity
model
Description
11" (27.94 cm)
14" (35.56 cm)
9" (22.86 cm)
11" (27.94 cm)
74 lbs. (33.56 kg) 79 lbs. (35.83 kg)
0.35 ft3/ 9.9 liters 0.52 ft3/ 14.7 liters
V-Max 5
V-Max 65
Tweeter
5 1/4" 2-Way
6 1/2" 2-Way
10” Subwoofer
12” Subwoofer
15” Subwoofer
3KHz-20KHz
50Hz-20KHz
40Hz-20KHz
20Hz-500Hz
20Hz-500Hz
20Hz-500Hz
RMS
Sensitivity
50 Watts
100 Watts
100 Watts
600 Watts
600 Watts
600 Watts
91dB
90dB
91dB
86.1/86.2 dB
86.8/87.2 dB
87.3/87.8 dB
Nominal Impedance
4 ohms
4 ohms
4 ohms
2/4 ohms
2/4 ohms
2/4 ohms
2.5"
2.5"
Voice Coil Diameter
V-Max15.2/15.4
2.5"
Dimensions
2" (50mm)
3/4" (19mm)
Mounting Diameter
Mounting Depth
Spkr Displacement
4 1/2" (114mm)
5" (127mm)
9-1/4" (235mm) 11-5/32" (283mm) 14-3/32" (358mm)
2" (52mm)
2 1/2" (63.5mm) 5-5/8" (143mm)
6" (152.4mm)
7-1/8" (181mm)
.09 cu.Ft./2.5 liters 0.13 cu.Ft./3.7 liters 0.22 cu.Ft./6.2 liters
HED SUBWOOFERS
HED UNIFIED COMPONENTS
model
V-Max 10.2/10.4 V-Max 12.2/12.4
Power Handling
Dimensions
Mounting Diameter
Depth
Total Weight
Spkr Displacement
V-Max 1.0
HED 4
HED 46
HED 5
HED 6
HED 6.5
HED 57
HED 69
model
HED 8.2/8.4
HED 10.2/10.4
HED 12.2/12.4
HED 15.2/15.4
4" 2-way
4x6" 2-way
5-1/4" 2-way
6" 2-way
6-1/2" 2-way
5x7" 2-way
6x9" 2-way
Description
8" Subwoofer
10" Subwoofer
12" Subwoofer
15" Subwoofer
55Hz-20KHz
50Hz-20KHz
40Hz-20KHz
40Hz-20KHz
35Hz-20KHz
35Hz-20KHz
30Hz-20KHz
Frequency Response
20Hz-500Hz
20Hz-500Hz
20Hz-500Hz
20Hz-500Hz
30 Watts
35 Watts
40 Watts
40 Watts
50 Watts
50 Watts
60Watts
RMS
200 Watts
200 Watts
300 Watts
300 Watts
Sensitivity
86 dB
85.8 dB
87.1 dB
88.6 dB
88.6 dB
89.9 dB
90.3 dB
Sensitivity
91/89 dB
91/89 dB
92/90 dB
92/90 dB
Impedance
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
Nominal Impedance
Dual 2/4 ohms
Dual 2/4 ohms
Dual 2/4 ohms
Dual 2/4 ohms
Voice Coil Diameter
1.5" (38mm)
1.5" (38mm)
2" (50mm)
2" (50mm)
7-5/16" (185.5mm)
5" (127mm)
9" (228mm)
5-5/8" (143mm)
11-1/16" (281mm)
6-1/2" (165mm)
13-13/16" (350mm)
7-1/2" (190mm)
0.042 ft3 /1.2 liters
0.059 ft3 /1.7 liters
0.094 ft3 /2.7 liters
0.15 ft3 /4.1 liters
Description
Frequency Response
Power Handling
MAX
Power Handling
Dimensions
Mounting Diameter
Mounting Depth
Width
Height
3-11/16" (94mm)
n/a
4-1/2" (114mm)
2" (52mm)
2" (52mm)
2-1/4" (57mm)
n/a
5-7/8" (150mm)
n/a
n/a
4-1/2/114" (114.3mm)
n/a
5" (127mm) 5-1/2"/5"(139/127mm)
n/a
n/a
2-3/16" (56mm) 2-5/16" (59mm) 2-1/44" (57.7mm) 2-7/8" (73.2mm)
n/a
n/a
7-1/4" (184mm) 8-3/4" (222mm)
n/a
n/a
5" (127mm) 6-1/16" (154mm)
Dimensions
Mounting Diameter
Mounting Depth
Spkr. Displacement
XL AMPLIFIERS
EXL AMPLIFIERS
model
General Description
EXL 350.2
EXL 400.4
EXL 1200D
2 Channel Amp
4 Channel amp
Mono Class D Amp
• 4 x 100 watts into 2 ohms
@ less than 0.1% THD
• 4 x 60 watts into 4 ohms
@ less than 0.1% THD
• Vega Bass! Boost Control
• High Current MOSFET
Power Supply
• Audiophile Class A/B
Bipolar Output Stage
• Durable Mil Spec Glass
Epoxy pcb
• Audiophile Grade Audio
Components in Signal Path
• Variable 12dB/oct Highpass
-Lowpass Crossover
• 1200 watts Mono into 1ohm
@ less than 1% THD
• Vega Bass! Boost Control
• High Current MOSFET
Power Supply
• Durable Mil Spec Glass
Epoxy pcb
• "Stackable" Capability
• Variable 12dB/oct Highpass
-Lowpass Crossover
• Remote Low-Pass Level
Control
13.25" x 9.5" x 2.5"
15" x 9.5" x 2.5"
18.25" x 9.5" x 2.5"
(33.66cm x 24.13cm x3.25cm)
(38.1 cm x 24.13 cm x 3.25 cm)
(47 cm x 24.13 cm x 3.25 cm)
7.32 lbs (3.32 kg)
8.18 lbs (3.71 kg)
12.82 lbs (5.85 kg)
• 2 x 175 watts into 2ohms
@ less than 0.1% THD
• 2 x 110 watts into 4 ohms
@ less than 0.1% THD
• VegaBass! Boost Control
• High Current MOSFET
Power Supply
• Audiophile Class A/B
Bipolar Output Stage
• Durable Mil Spec Glass
Epoxy pcb
• Audiophile Grade Audio
Components in Signal Path
• Variable 12dB oct Highpass
- Lowpass Crossover
Dimensions
Weight
model
XL 150.2
XL 300.1
• 1 x 150 watts into 4 ohms
@ less than 0.1% THD
@ less than 0.1% THD
• 1 x 300 watts into 2 ohms
• 2 x 50 watts into 4 ohms
@ less than 0.1% THD
@ less than 0.1% THD
• Vega Bass! Boost Control
• Vega Bass! Boost Control
• High Current MOSFET
• High Current MOSFET
Power Supply
Power Supply
• Audiophile Class A/B Bipolar • Audiophile Class A/B Bipolar
Output Stage
Output Stage
• Variable 12dB/oct Highpass • Variable 12dB/oct Highpass
-Lowpass Crossover
-Lowpass Crossover
• High Level Speaker Inputs • "Stackable" Capability
• Thermal and Overload
• Thermal and Overload
Protection
Protection
General Description • 2 x 75 watts into 2 ohms
Dimensions 11" x 10.5" x 2.25"
(27.94 cm x 26.67 cm x 5.72 cm)
Weight 5.88 lbs (2.67 kg)
11" x 10.5" x 2.25"
XL 300.2
• 2 x 150 watts into 2 ohms
@ less than 0.1% THD
• 2 x 105 watts into 4 ohms
@ less than 0.1% THD
• Vega Bass! Boost Control
• High Current MOSFET
Power Supply
• Audiophile Class A/B Bipolar
Output Stage
• Variable 12dB/oct Highpass
-Lowpass Crossover
• High Level Speaker Inputs
• Thermal and Overload
Protection
13.25" x 10.5" x 2.25"
XL 300.4
• 4 x 75 watts into 2 ohms
@ less than 0.1% THD
• 4 x 50 watts into 4 ohms
@ less than 0.1% THD
• Vega Bass! Boost Control
• High Current MOSFET
Power Supply
• Audiophile Class A/B Bipolar
Output Stage
• Variable 12dB/oct Highpass
-Lowpass Crossover
• High Level Speaker Inputs
• Thermal and Overload
Protection
13.25" x 10.5" x 2.25"
XL 600.1
• 600 watts Mono into 2 ohm
@ less than 1% THD
• Vega Bass! Boost Control
• High Current MOSFET
Power Supply
• Variable 12dB/oct Highpass
-Lowpass Crossover
• High Level Speaker Inputs
• Thermal and Overload
Protection
• Remote Lowpass Level
Control
17.5" x 10.5" x 2.25"
(27.94 cm x 26.67 cm x 5.72
(33.66 cm x 26.67 cm x 5.72 cm)
(33.66 cm x 26.67 cm x 5.72 cm)
(44.5 cm x 26.67 cm x 5.72 cm)
7.26 lbs (3.29 kg)
7.26 lbs (3.29 kg)
7.5 lbs (3.4 kg)
8.5 lbs (3.86 kg)
MO
O BB II LL EE AA UU DD II OO
M
cv_mobile_brochure
8/31/05
8:59 AM
Page 8
Don’t just Expect More...
GET MORE!
The history of Cerwin-Vega! is a legacy of high performance breakthroughs that spans more than half a century. Over that time,
Cerwin-Vega! has introduced hundreds of innovative and award winning designs that have advanced the state of the art for
loudspeaker products ranging from the stage to the home and car. The tradition continues to this day. Cerwin-Vega! continues to
drive technology forward to bring you innovative products ranging from the multi-patented Stroker Pro™ to the affordable HED™.
Cerwin-Vega! will continue to develop new technologies to bring products to market that create a listening experience
commensurate with over 50 years of innovative design.
When a brand chooses excellence as its goal, amazing things begin to happen. The latest examples of this fact are on display for
you in this brochure. Choose Stroker Pro or Stroker, the most advanced competition subwoofers available in mobile audio. Opt for
V-Max subwoofers, offering value and performance unavailable from any other brand. Or choose from our HED Series of
Subwoofers and Unified Components. You can also power your system with EXL or XL, our two complete lines of
performance-driven amplifiers. Whatever you want, Cerwin-Vega! has a product that’s just right for your application and budget.
We invite you to experience the sound that’s been disturbing the peace for over 50 years—Cerwin-Vega!. The long and winding
road has never sounded so good.
For more information, visit us at www.cerwin-vega.com.
MO B I L E
AU D I O
USA: Cerwin-Vega!, Inc. • 9340 De Soto Ave. • Chatsworth, CA • 91311 ©2005 Cerwin-Vega
Phone: 1-818-534-1500 • Fax: 1-818-534-1590 • Cerwin-Vega! is a division of the Stanton Group
Cerwin-Vega! reserves the right to make changes to product specifications and design at any time
F150 on front cover provided courtesy Sergio and