ATD-Pressure Gas System Corporation

ATD-PressureGasSystem
We are confident that we have the most knowledgeable team in place in order to
provide the best service, equipment, and technical support to our customers. We
understand how critical your operations are and ATD is committed to supporting
your production. We encourage your feedback as we are continuously making
changes to suit our customers needs. Please see our contact information below.
Please send quote requests and orders to [email protected] or call our main office 1(843)553-2374
For Technical Support or Technical questions please contact your ATD - Technical Advisor/Territory Manager:
Tom Spaits located in our South Carolina office - [email protected] - cell 1(908)601-9167
John Stulack located in our New Jersey office - [email protected] - cell 1(843)830-8488
Mike Thomas located in our California office - [email protected] - cell 1(210)616-1824
Office Manager - [email protected] - phone 1(843)553-2374
Warehouse Manager - [email protected] - phone 1(843)553-2374
Page 1 of 24
TABLE OF CONTENTS
Section I
BASE SOCKETS & LOCKING EQUIPMENT
Section II
DRILLING EQUIPMENT
Section II
DRILLING EQUIPMENT
SECTION III
ATD-PRESSURE GAS TUBES
SECTION IV
ATD - Operating Material
SECTION V
FILLING AND ASSEMBLY EQUIPMENT
SECTION VI
DETONATING EQUIPMENT
SECTION VII
Tube Inspections and repairs
SECTION VIII
Maxpro and Haskel liquid transfer pump service
SECTION IX
Cardox Safety Training
SECTION X
Consulting and Contracting services
Page 2 of 24
ATD-PressureGasSystem Parts List 2015
Section I
BASE SOCKETS & LOCKING EQUIPMENT
Base Sockets
Photo
Part No.
Description
The Base Socket is the access port that enables the Pressure Gas Tube to be inserted
into the material build-up for removal. We offer a variety of types and provide
Technical Support and Consulting for Base Socket placement and installation.
42099
Base Socket complete with Locking Plate and lanyard.
42096
Base Socket complete with added Safety Flap. Our Safety Flap helps prevent hot
material, debris and gases from exiting the Base Socket when removing the PGS Tube.
42102
Locking plate for Base Socket.
42303
Safety Flap with mounting bracket. Can be added to an existing Base Socket. Helps
prevent hot material, debris and gases from exiting the Base Socket when removing
PGS Tube.
42101
Special low profile Locking Plate (enables Safety Clap to close completely).
42090
Silo Type Base Socket can be bolted to a vessel wall when welding is not possible.
Please contact us for orders.
ATD offers a variety of Base Socket configurations for many types of applications.
please call Please contact us for more information.
Page 3 of 24
Gripcases
Photo
Part No.
Description
The Gripcase is the counterpart and locking device to the Base Socket. Its placement
determines how deep the Tube is inserted and holds the Tube securely during
detonation. We offer a variety of types.
42610
Gripcase with coarse round type thread for use with tube types 29-60-75.
42650
Gripcase with coarse round type thread for use with tube types 55-83-100.
42600
Gripcase with fine thread for use with tube types 29-60-75.
42700
Gripcase with fine thread for use with tube types 55-83-100.
42729
Special Gripcase with four pushers for extra holding pressure (includes handles).
79405
30mm Combination Wrench for tightening Gripcase
42611
Pusher set for Gripcase 42610 (includes threadlock compound) - coarse thread for use
with Tube types 29 - 60 and 75.
42652
Pusher set for Gripcase 42610 (includes threadlock compound) - coarse thread for use
with Tube types 55-83 and100.
42601
Pusher set for Gripcase 42600 (includes threadlock compound)- fine thread for use
with 29-60-75.
42704
Pusher set for Gripcase 42700 (includes threadlock compound) - fine thread for use
with 55-83-100.
42610
Pusher Screw only- coarse thread for Gripcases 42610 and 42650.
Page 4 of 24
Gripcases Cont'd
Photo
Part No.
Description
42703
Pusher Screw only - fine thread for Gripcase 42600 and 42700.
42705
Set of replacement Gripcase handles (two per set) compatible with all type of
Gripcases.
Clamping Accessories
Photo
Description
Part No.
42720
Tube Clamp for additional fastening. Compatible with all Pressure Gas System Tubes.
51305
Eye Bolt for Auto Valve Tube Head (#51230). Enables versatile securing of Tube.
Page 5 of 24
Section II
DRILLING EQUIPMENT
Drill Guide
Photo
Description
Part No.
47000
Drill Guide - Keeps the drill straight and reduces Rock Drill weight during drilling
procedure. Attaches to Base Socket.
Percussive Drill Rods and Bits
Photo
Part No.
Description
47401
Percussive Drill Rod 24" (.6 m) long with shank type 7/8" X 3 - 1/4" left handed thread.
47402
Percussive Drill Rod 32" (.8 m) long with shank type 7/8" X 3 - 1/4" left handed thread.
47403
Percussive Drill Rod 39" (1. m) long with shank type 7/8" X 3 - 1/4" left handed thread.
47405
Percussive Drill Rod 47" (1.4 m) long with shank type 7/8" X 3 - 1/4" left handed
thread.
47407
Percussive Drill Rod 55" (1.5 m) long with shank type 7/8" X 3 - 1/4" left handed
thread.
47409
Percussive Drill Rod 63" (1.6) long with shank type 7/8" X 3 - 1/4" left handed thread.
47411
Percussive Drill Rod 71" (1.8 m) long with shank type 7/8" X 3 - 1/4" left handed
thread.
47413
Percussive Drill Rod 79" (2. m) long with shank type 7/8" X 3 - 1/4" left handed thread.
47413
Percussive Drill Rod 79" (2.2 m) long with shank type 7/8" X 3 - 1/4" left handed
thread.
Page 6 of 24
Percussive Drill Rods and Bits Cont'd
Photo
Description
Part No.
48107
Percussive Drill Bit type G60 carbide 2- 3/8" (60 mm) left handed thread compatible
with all "ATD - Percussive Drill Rods". This bit is designed for adverse conditions.
48108
Percussive Drill Bit type G60 S (sharp design) carbide 2 - 3/8" (60 mm) left handed
thread compatible with all ATD - Percussive Drill Rods 47401 thru 47413. This bit is
designed for adverse conditions.
Drill Steels and Bits
Photo
Description
Part No.
47600
Percussive Drill Steel 30" long - 7/8" X 3 1/4" shaft.
47601
Percussive Drill Steel 36" long - 7/8" X 3 1/4" shaft.
47602
Percussive Drill Steel 48" long - 7/8" X 3 1/4" shaft.
47603
Percussive Drill Steel 60" long - 7/8" X 3 1/4" shaft.
47604
Percussive Drill Steel 78" long - 7/8" X 3 1/4" shaft.
47605
Percussive Drill Steel 24" long - 7/8" X 3 1/4" shaft.
48114
Rock bit - carbide - 2- 5/16" H - Thread - Compatible with all "Drill Steels" This bit is
designed for moderate conditions.
Control Tubes
Photo
Description
Part No.
Control Tubes help the operator clear out and check the quality of the bore following
the drilling the operation prior to inserting the PGS loaded tube.
50601
Control Tubes for systems with 29 - 60 & 75 Tubes (Gripcase shown in photo not
included).
Page 7 of 24
Control Tubes Cont'd
Photo
Description
Part No.
50602
Control Tube for systems with 55 - 83 & 100 Tubes (Gripcase shown in photo not
included.)
Percussive Rock Drills
Photo
Description
Part No.
We offer a variety of Percussive Rock Drill types and sizes.We also offer Air Motor type
Drills and Core Drilling equipment. Please feel free to contact your Technical Advisor
for details on what would be best for your specific application.
80200
Sullair Rock Drill MRD30 (30lbs.) Compatible with all ATD Drill Rods and Drill Steels
(7/8" X 3 1/4").
80150
Sullair Rock Drill MRD40 (40lbs.) Compatible with all ATD Drill Rods and Drill Steels
(7/8" X 3 1/4").
80100
Sullair Rock Drill MRD50 (50lbs.) Compatible with all ATD Drill Rods and Drill Steels
(7/8" X 3 1/4").
80011
TJ-15 Rock Drill (30lbs.) Compatible with all ATD Drill Rods and Drill Steels (7/8" X 3
1/4").
Percussive Rock Drills Accessories
Photo
Description
Part No.
80210
Special moly blend oil designed specifically for Rock Drills. Increases Rock Drill
preformance and longevity.
80012
Lexan type in line oiler provides consistent flow of oil to your Rock Drill - Clear lexan
design allows operator to see oil level during operation. Attaches directly to Rock Drill.
80015
In line oiler with aluminum body attaches between air lines providing a consistent flow
of oil to your Rock Drill. 32 ounce capacity.
Page 8 of 24
SECTION III
ATD-PRESSURE GAS TUBES
Middle Sections (Tube Only)
Photo
Part No.
Description
50290
ATD Pressure Gas Tube Middle Section RM 290 - (O.D 1 -13/16" length 27- 1/2" weight
-11lbs.)
50550
ATD Pressure Gas Tube Middle Section RM 550 - (O.D 2- 1/8" length 37 -1/2" weight 22lbs.)
50600
ATD Pressure Gas Tube Middle Section RM 600 - (O.D 1-13/16" length 47-1/4" weight 20lbs.)
50750
ATD Pressure Gas Tube Middle Section RM 750 - (O.D 1-13/16" length 57-1/4" weight 22 lbs.)
50830
ATD Pressure Gas Tube Middle Section RM 830 - (O.D 2-1/8" length 49-1/4" weight 31lbs.)
50900
ATD Pressure Gas Tube Middle Section RM 1000 - (O.D 2-1/8" length 59" weight - 37 1/2lbs.)
Pressure Gas Tubes Complete
Photo
Part No.
Description
All six above Tube Middle Sections can be ordered complete with your choice of Tube
Head and Discharge Head. If you do not see your preferred combination below, please
contact us and request your specific needs.
500291
RM 290 (#50290) complete with Tube Head RK 455 (#51200) and Four Way Discharge
Head Z 451-6 (#52003)
500292
RM 290 (#50290) complete with Tube Head RK 455 (#51200) and Two Way Discharge
Head L 45-6 (#52009)
500293
RM 290 (#50290) complete with Auto Valve Tube Head (#51230) and Four Way
Discharge Head Z 451-6 (#52003)
500294
RM 290 (#50290) complete with Auto Valve Tube Head (#51230) and Two Way
Discharge Head L45-6 (#52009)
Page 9 of 24
Pressure Gas Tubes Complete Cont'd
Photo
Part No.
Description
500540
RM 550 (#50550) complete with Tube Head RK 455 (#51200) and Four Way Discharge
Head Z 501-6 (#52023)
500541
RM 550 (#50550) complete with Tube Head RK 455 (#51200) and Two Way Discharge
Head L 50-6 (#52022)
500538
RM 550 (#50550) complete with Auto Valve Tube Head (#51230) and Four Way
Discharge Head Z 501-6 (#52023)
500539
RM 550 (#50550) complete with Auto Valve Tube Head (#51230) and Two Way
Discharge Head L 50-6 (#52022)
50060
RM 600 (#50600) complete with Tube Head RK 455 (#51200) and Four Way Discharge
Head Z 451-6 (#52003)
50062
RM 600 (#50600) complete with Tube Head RK 455 (#51200) and Two Way Discharge
Head L 45-6 (#52009)
50063
RM 600 (#50600) complete with Auto Valve Tube Head (#51230) and Four Way
Discharge Head Z 451-6 (#52003)
50065
RM 600 (#50600) complete with Auto Valve Tube Head (#51230) and Two Way
Discharge Head L 45-6 (#52009)
500751
RM 750 (#50750) complete with Tube Head RK 455 (#51200) and Two Way Discharge
Head L 45-6 (#52009)
500750
RM 750 (#50750) complete with Tube Head RK 455 (#51200) and Four Way Discharge
Head Z 451-6 (#52003)
500751
RM 750 (#50750) complete with Auto Valve ube Head (#51230) and Two Way
Discharge Head L 45-6 (#52003)
500756
RM 750 (#50750) complete with Auto Valve Tube Head (#51230) and Four Way
Discharge Head Z 451-6 (#52003)
Page 10 of 24
Pressure Gas Tubes Complete Cont'd
Photo
Part No.
Description
50085
RM 830 (#50830) complete with Tube Head RK 455 (#51200) and Four Way Discharge
Head Z-501-6 (#52023)
50085
RM 830 (#50830) complete with Tube Head RK 455 (#51200) and Two Way Discharge
Head L 50-6 (#52022)
500831
RM 830 (#50830) complete with Auto Valve Tube Head (#51230) and Four Way
Discharge Head Z-501-6 (#52023)
500833
RM 830 (#50830) complete with Auto Valve Tube Head (#51230) and Two Way
Discharge Head L 50-6 (#52022)
50210
RM 1000 (#50900) complete with Tube Head RK 455 (#51200) and Four Way
Discharge Head Z-501-6 (#52023)
501021
RM 1000 (#50900) complete with Tube Head RK 455 (#51200) and Two Way
Discharge Head L50-6 (#52022)
501000
RM 1000 (#50900) complete with Auto Valve Tube Head (#51230) and Four Way
Discharge Head Z-501-6 (#52023)
501001
RM 1000 (#50900) complete with Auto Valve Tube Head (#51230) and Two Way
Discharge Head L50-6 (#52022)
Tube Heads
Photo
51200
Description
Tube Head RK 455 compatible with all ATD - PGS Tubes. Comes with standard Valve
Spindle (#51195) and requires Safety Valve Key type (#79304).
Please order Tube Head Part (#512006) if you prefer the Hex type Valve Spindle as
seen directly below.
512006
Tube Head RK 455 compatible with all ATD - PGS Tubes. Comes with hex type Valve
Spindle (#51198) and requires Safety Valve Key (#79306).
51230
New ATD- Auto Valve Tube Head compatible with all ATD-PGS Tubes with Eye Bolt or
Extension rod capability. Comes with new style Drain Valve (#51307) and requires
Safety Valve Key (#51325).
51210
Tube Head RK 455 type with auto valve. Compatible with all ATD-PGS Tubes. Can be
used with Valve Spindle (#51195) or Valve Spindle (#51198)
Part No.
Page 11 of 24
Safety Valve Keys (for Tube Head Valve Spindles and Drain Valves)
Photo
Description
Part No.
79304
Safety Valve Key for use with Valve Spindle (#51195) or Tube Head (#51200)
79306
Safety Valve Key for use with Valve Spindle (#51198) or Tube Head (#512006)
51325
Safety Valve Key for use with Auto Valve Tube Head (#51230)
RK 455 (#51200 & 512006)Tube Head Parts and Accessories
Photo
Description
Part No.
51195
Valve Spindle compatible with Tube Head RK 455 (#51200 & (#51210)
51198
Valve Spindle compatible with Tube Head RK 455 (#51200 (#512006) & (#51210)
51194
O - Ring for Valve Spindle (#51195) & (#51198)
51100
Contact Pin compatible with all ATD Tube Heads
51103
Contact Nut compatible with all ATD Tube Heads
51104
Insulator for Contact Pin compatible with all ATD Tube Heads
51108
Contact Tube compatible with all ATD Tube Heads
51197
Inset for Tube Head compatible with Tube Heads (#51200) (#512006) & (#51210)
51192
Inset copper washer compatible with Tube Heads (#51200) (#512006) & (#51210)
Page 12 of 24
RK 455 (#51200 & 512006)Tube Head Parts and Accessories Cont'd
Photo
Description
Part No.
51197
Spanner tool for removing and tightening Inset (#51197) torque wrench required.
Auto Valve Tube Head 51230 Parts and Accessories
Photo
Description
Part No.
51326
Allen Wrench for removing Auto Valve Screw on Auto Valve Tube Head (#51230)
51305
Eye Bolt for Auto Valve Tube Head (#51230). Enables versatile securing of Tube.
51310
Auto Valve Repair Kit complete for Auto Valve Tube Head (#51230). Five piece kit
included parts (#51300) (#51301) (#51302) (#51303) and (#51194)
79057
Torque Wrench - recommended for torquing Auto Valve Screw
51315
Seal Kit only for Auto Valve Tube Head (#51230). Two piece kit included seals (#51301)
and (#51194)
51307
Drain Valve with O-Ring for Auto Valve Tube Head (#51230).
Auto Valve Tube Head 51210 Parts and Accessories
Photo
Description
Part No.
51212
Auto Valve Repair Kit complete for Auto Valve Tube Head (#51210). Five piece kit
included all Auto Valve components.
51213
Seal Kit for Auto Valve Tube Head (#51210). Two piece kit included seals only.
51195
Valve Spindle for Tube Head RK 455 (#51200) & (#51210).
51198
Hex Type Valve Spindle For Tube Head RK 455 (#51200) (#512006) & (#51210).
Page 13 of 24
Discharge Heads
Photo
Description
Part No.
We specialize in offering a large variety of Discharge Heads for many applications. If
you do not see what you are looking for please contact us!
Standard Four Way Discharge Heads -Eight evenly spaced holes (at 90 degrees
increments) create a large circular blasting pattern. Ideal for large open areas.
52003
Four Way Discharge Z 451-6 Four Way Discharge Head for use with Tube types 29, 60
and 75.
52023
Four Way Discharge Z 501-6 Four Way Discharge Head for use with Tube types 55, 83
and 100.
52001
Special 12 Hole Four Way Discharge Head Z45-6 for use with Tube types 29, 60, and
75. This Discharge Head captures the ruptured shear disc preventing it from entering
your process. Ideal for use in finish product silos.
52021
Special 12 Hole Four Way Discharge Head Z50-6 for use with Tube types 55, 83 and
100. This Discharge Head captures the ruptured shear disc preventing it from entering
your process. Ideal for use in finish product silos.
Two Way Discharge Heads have two elongated slots (180 degrees apart) creating a
linear blasting pattern. Ideal for feed pipes and corner applications.
52009
Two Way Discharge Head L 45-6 for use with Tube types 29, 60 and 75.
52022
Two Way Discharge Head L 50-6 for use with Tube types 55, 83 and 100.
Special Three Way Discharge Head has six holes (spaced at three - 90 degree
increments). Ideal for corner applications.
52010
Three Way Discharge Head T 45-6 for use with Tube types 29, 60 and 75.
52055
Three Way Discharge Head T 50-6 for use with Tube types 55, 83 and 100.
Page 14 of 24
Discharge Heads Cont'd
Photo
Part No.
Description
Special One Way Discharge Head with a elongated slot that provides a directional blast
(80% of the gaseous discharge). This head has a small relief hole (20% of gaseous
discharge) located 180 degrees from the slot to minimize the movement of the tube.
Additional clamping may be required.
52045
Special One Way Discharge Head OW 45-6 for use with Tube types 29, 60, and 75.
52050
Special One Way Discharge Head OW 50-6 for use with Tube types 55, 83, 100.
52051
Discharge Head K 50-A with extendable hook. The hook extends following the blast.
Please contact us for more information.
52029
Discharge Head 2501-S comes with an added drill tip. For use with 55 - 83 or 100 type
tubes.
New and ONLY AVAILABLE from ATD! Please contact us for details.
New "Target Blaster System". Patent pending.
New "Straight Shot" technology. Patent pending.
New 100% Locking Collar. Can be ordered with your choice of discharge tube.
Patent pending.
Page 15 of 24
Prolongation Tubes and Heads
Photo
Part No.
Description
Prolongation Tubes enable the operator to increase the length of any ATD Pressure
Gas Tube. Great for hard to reach areas! Our Prolongation Tubes come in a large
variety of lengths, sizes and types. Please contact us if you do not see your specific
needs, custom sizes can be made upon ordering.
53003
Prolongation Head E 45-6 for use with Tube types 29, 60 and 75. The Prolongation
Head serves as a bushing enabling the addition of the Prolongation Tube.
53004
Prolongation Head Thread Protector Cap GS4-45 compatible with (#53003).This cap
protects the exposed thread from debris and potential damage.
53007
Prolongation Head E 50-6 for use with Tube types 55, 83 and 100. The Prolongation
Head serves as a bushing enabling the addition of the Prolongation Tube.
53008
Prolongation Head Thread Protector Cap GS4-50 compatible with (#53007).This cap
protects the exposed thread from debris and potential damage.
50340
Prolongation Tube with Four Way Discharge with flat type end. Length 15 3/4"
compatible with Tube types 29 - 60 -75.
50341
Prolongation Tube with Four Way Discharge with wedge type end. Length 15 3/4"
compatible with Tube types 29 - 60 - 75.
51342
Prolongation Tube with Four Way Discharge with machined point end. Length 15 3/4"
compatible with Tube types 29 - 60 - 75.
50370
Prolongation Tube with Four Way Discharge with flat end. Length 27 1/2" compatible
with 29 - 60 - 75.
50371
Prolongation Tube with Four Way Discharge with wedge type end. Length 27 1/4""
compatible with Tube types 29 - 60 - 75.
50372
Prolongation Tube with Four Way Discharge with machined point end. Length 27 1/2"
compatible with Tube types 29 - 60 - 75.
50840
Prolongation Tube with Four Way Discharge with flat end. Length 15 3/4" compatible
with 55 - 83 - 100.
Page 16 of 24
Prolongation Tubes and Heads Cont'd
Photo
Description
Part No.
50841
Prolongation Tube with Four Way Discharge with wedge type end. Length 15 3/4"
compatible with Tube types 55 - 83 - 100.
50842
Prolongation Tube with Four Way Discharge with machined point end. Length 15 3/4"
compatible with Tube types 55 - 83 - 100.
50862
Prolongation Tube with Two Way Discharge with machined point end. Length 23 1/2"
compatible with Tube types 55 - 83 - 100.
50863
Prolongation Tube with Two Way Discharge with flat end. Length 23 1/2" compatible
with Tube types 55 - 83 - 100.
50870
Prolongation Tube with Four Way Discharge and flat end. Length 27 1/4" compatible
with 55 - 83 - 100 type Tubes.
50871
Prolongation Tube with Four Way Discharge with wedge end. Length 27 1/4"
compatible with 55 - 83 - 100 type Tubes.
50872
Prolongation Tube with Four Way Discharge with machined point end. Length 27 1/4"
compatible with Tube types 55 - 83 - 100.
Page 17 of 24
SECTION IV
ATD - Operating Material
Generators
Photo
Description
Part No.
ATD offers three different size Generators (8# - 10# -11#). Generators come in a box
of 100 including 100 Copper Washers, 100 Shear Discs and five Safety Clips. If you are
not sure what type of generators you need for your system, please contact us.
60501
# 8 - 100 DG Generators with 100 Copper Washers (C45), 100 Shear Discs (BS 303) and
5 Safety Clips.
60502
# 8 - 100 DG Generators with 100 Copper Washers (C50), 100 Shear Discs (BS 353) and
5 Safety Clips.
60503
# 10 - 100 DG Generators with 100 Copper Washers (C50), 100 Shear Discs (BS 353)
and 5 Safety Clips
60504
# 10 - 100 DG Generators with 100 Copper Washers (C50), 100 Shear Discs (BS 354)
and 5 Safety Clips
60507
# 10 - 100 DG Generators with 100 Copper Washers (C45), 100 Shear Discs (BS 303)
and 5 Safety Clips.
60505
# 11 - 100 DG Generators with 100 Copper Washers (C50), 100 Shear Discs (BS 354)
and 5 Safety Clips
60506
# 11 - 100 DG Generators with 100 Copper Washers (C50), 100 Shear Discs (BS 353)
and 5 Safety Clips
Shear Discs
Photo
Description
Part No.
61015
Shear Disc BS 303 comes in a box with 50 pieces. Compatible with Tube types 29 - 60
and 75 with specific generator combination.
61035
Shear Disc BS 353 comes in a box with 50 pieces. Compatible with Tube types 55 -83
and 100 with specific generator combination.
61037
Shear Disc BS 354 comes in a box with 50 pieces. Compatible with Tube types 55 - 83
and 100 with specific generator combination.
Page 18 of 24
Copper Washers
Photo
Part No.
Description
61101
Copper Washer C 45 comes in packets of 100 pieces. Compatible with Tube types 29 60 and 75.
61102
Copper Washer C 50 comes in packets of 100 pieces. Compatible with Tube types 55 83 and 100.
Safety Transport Clip
Photo
Description
Part No.
60005
Safety Transport Clip - Our Safety Clip attaches to the electrical Contact Tubes on the
Tube Head for safe transportation of a loaded Tube.
Generator Storage Magazines and Locks
Photo
Description
Part No.
80917
Type II Outdoor Type Magazine is MSHA and ATF approved for Generator Storage.
Magazine stores 200 Generators.
80915
Type IV Indoor Type Magazine is ATF approved. Magazine stores 200 Generators.
80910
ATF/MSHA approved locks keyed alike for both type Magazines.
Page 19 of 24
SECTION V
FILLING AND ASSEMBLY EQUIPMENT
Wallmount Co2 Filling Station and Parts
Photo
Description
Part No.
For complete system orders please contact us. We specialize in providing the exact
type of equipment needed for your specific applications.
70906 US
ATD - Wallmount Co2 Tube Filling Station - Comes with Maxpro Co2 Liquid Transfer
Pump and Tube Support Base.
70851
High Pressure Filling Nozzle top packing nut - one piece.
70852
High Pressure Filling Nozzle base - one piece.
70853
High Pressure Filling Nozzle - one piece.
70854
High Pressure Filling Nozzle complete assembly - three piece includes (#70851)
(#70852) and (#70853).
71216
Co2 Steel Braided 72" Supply Hose with supply cylinder connector included.
Compatible with ATD Wallmount liquid transfer pump.
70900
Maxpro Liquid Transfer Pump compatible with ATD Wallmount. Pump is pre-equipped
for Co2 service. ATD provides pump repairs and complete rebuilds.
72000
Maxpro rebuilding kit complete. Includes replacement seals for the air section, spool
valve and hydraulics.
71109
ATD - supplies Maxpro pumps on our Wallmount. However we do sell and service
Haskel Pumps as well.
72010
Haskel rebuilding kit complete. Includes replacement seals for the air section, spool
valve and hydraulics.
Page 20 of 24
Wallmount Co2 Filling Station and Parts Cont'd
Photo
Description
Part No.
70911
High Pressure Valve for Wallmount - 1/4" NPT thread type.
70950
High Pressure Valve for Wallmount - 3/8" NPT thread type.
70977
Muffler for Maxpro Pump.
71218
Special adapter used on Co2 supply cylinders equipped with a reverse flow valve.
Please contact us for details.
70928
Wallmount Safety Pop Off Valve for air suppling the liquid transfer pump.
70925
Wallmount air supply Regulator.
70892
Wallmount Tube Base Support complete - three pieces.
360 Degree Rotating Vise and Parts.
Photo
Description
Part No.
79000
360 degree rotating Vise for assembling ATD-PGS Tubes.
79001
Adjustment Screw for 360 degree Rotating Vise.
79003
Front Plate for 360 degree Rotating Vise.
79010
Locking Pin for 360 degree Rotating Vise.
79011
V Block for 360 degree Rotating Vise.
Page 21 of 24
Tube Assembly and Disassembly Tools
Photo
Description
Part No.
79040
Impact Gun for assembly and disassembly of all ATD Tubes.
79052
Impact Socket 41mm for assembly and disassembly of all ATD Tubes.
80568
MSHA approved Ohm Meter for testing Tube continuity after tube assembly and prior
to detonation. Comes complete with case, battery and wire leads with banana plugs.
79509
Hook Tool for removing used Copper Washer & Shear Disc and Generators.
Tube Maintenance and Cleaning Tools
Photo
Description
Part No.
79340
Contact Tube Brush for cleaning electrical contact tubes on all types of ATD Tube
Heads.
79557
1/2" End Brush for cleaning Tube Head Contact Pin area.
79558
3/4" End Brush for cleaning all ATD Tube Middle section threads and seats.
79512
Pneumatic Die Grinder with 1/4" collet for operating End Brushes.
79345
Tube Brush complete for cleaning all types of ATD Tubes.
Page 22 of 24
SECTION VI
DETONATING EQUIPMENT
Blasting Machine
Photo
Description
Part No.
80515
Detonator with ATD special recessed buttons and quick connect plug in receptacles.
Comes complete with battery included.
Ohm Meter
Photo
Part No.
Description
80568
MSHA approved Ohm Meter for testing Tube continuity after tube assembly and prior
to detonation. Comes complete with case, battery and wire leads with banana plugs.
Detonating Wire
Photo
Description
Part No.
80563
50' length Detonating Wire with Banana Plugs and winder.
Banana Plugs
Photo
Description
Part No.
80501
Banana Plug Red for Detonating Wire or Ohm Meter Leads.
80502
Banana Plug Black for Detonating Wire or Ohm Meter Leads.
Tube and Equipment Transporter
Photo
Part No.
80300
Description
Transporter Caddy provides easy transport holding up to 8 Tubes, Rock Drill, Drill Rods,
Detonating Equipment, Gripcase, wrenches and accessories. Comes with Detonating
Bag (as show in photo) to separate the fragile electronics from the heavy steel
equipment.
Page 23 of 24
SECTION VII
Tube Inspections and repairs
ATD provides complete repair and inspection services for Tube Middle Sections, Discharge Heads and Tube Heads.
Equipment should be sent to our shop address: 7634 Southrail Rd., #601 North Charleston, SC 29420
SECTION VIII
Maxpro and Haskel liquid transfer pump service
ATD provides complete rebuilding and repair service for Maxpro and Haskel Co2 Pumps .Equipment should be sent
to our shop address: 7634 Southrail Rd., #601 North Charleston, SC 29420
SECTION IX
Cardox Safety Training
ATD is proud to provide the best Cardox Safety Training in the industry. Our Safety Training is specific to your
applications. Please contact your ATD Technical Advisor for scheduling and details.
SECTION X
Consulting and Contracting services
ATD provides Consulting and Contracting services. Please contact your ATD Technical Advisor for scheduling and
details.
Page 24 of 24