12 FT X 12 FT PE SUN SHELTER NETTING_instruction

Transcription

12 FT X 12 FT PE SUN SHELTER NETTING_instruction

• 
• 

• 

WILSON & FISHER
• 

• 
• 
• 

• 


• 

9
a.m 4
p.m
®
-B
12FT x 12FT
SUN SHELTER
E
T
Special notice:
 Before assembling, make sure that you lay out and iden fy all parts listed below
in the part list.
 All bolts should be hand ghtened. Never use powder tools or excessive force
during assembly and ghtening of bolts.
 It is recommended to assemble this product with 2 or more people.
According to the direction of
the arrow into the connector.
2
C&
C&2
C
C&
Spring Wire
3
3&4
Spring Wire
Spring Ball
1&2
Spring Ball
C
A&1
2
A
A&3
3
3
2
A
B
1
Spring Ball
4
4
1
3
3
3
C
2
1
A
2
3
A&3
4
3
G
1
5
3
B
3
3&5
3
5
5
D
B&3
B&3
Step 2
Fit on the canopy fabric:
h tly o ve r th e fra m e .
FIGURE 3
3) Hook the fabric of legs to a suitable bo om hole on tube 5#, please see FIGURE 1.
Step 3
Fix the whole canopy:
1) Insert one steel stake F into a hole on plas c base D, make it fix on the ground, please see
FIGURE 1, do same on other 3 bases .
2) Make one end of the rope E tie with the plas c ring on canopy fabric corner, please see
FIGURE 2, the other end tie with steel stake F , please see FIGURE 3,do same on other 3
ropes, pull the ropes to suitable 4 direc ons, fix the steel stakes F on the ground.
FIGURE 2
1
FIGURE 1
4) Connect tube 3# with part A & B to set up the frame top.
1 ) F it o n th e ca n o p y fa b ric G a n d p u ll th e ca n o p y fa b ric
B
B&
Step 1
Top frame assembly:
1) Make tube 3#,4# and corner connector A,B together.
2) Make tube 3#,4# and top connector C together.
3) Connect tube 1#,2# with part A,B,C and make sure they click into place.
D
5
D