b-1763 Toolcat lit sheet Ver 05/02 LR_SCREEN RESOLUTION ONLY

Toolcat
™
Utility Work Machine
Toolcat
™
Suspension
Formed and Welded
Steel Frame
Specifications
Rear
Leaf Springs
Machine
Engine
Weight (no attachments)
Overall Dimensions
(length x width x height)
Wheelbase
Outside Turning Diameter (AWS)
Fuel Capacity
Tire Size
Ground Clearance
Travel Speeds
Low Range
High Range
Reverse
Bobcat Built
5600
44 hp Kubota diesel
4400 lb.
Over the past 50 years, Bobcat
148 x 61 x 81 in.
85 in.
17 ft.
8.3 gal.
27 x 10.5-15 (6-ply)
10.2 in.
Company has revolutionized the
compact equipment industry
with countless innovations
0 - 10 mph
0 - 18 mph
0 - 10 mph
in compact loaders, excavators
Loader
Front
Coil Springs
The suspension system provides many benefits,
including smoother ride at travel speeds; axle
oscillation for better traction; and modulation
of attachment down-force.
18 MPH
Transport Speed
Rated Operating Capacity (ROC)
Lift Height (pivot pin)
Max. Reach (pivot pin)
Roll-Back Angle (at ground level)
Dump Angle (at full lift height)
Loader Control
and attachments. This spirit of
1500 lb.
84 in.
35 in.
21°
38°
Pilot-controlled hydraulic joystick
with integrated float feature
innovation has been channeled
into the new Toolcat product
line to give these unique
Attachment Systems
Hydraulic Flow
16.5 gpm
Hydraulic Pressure
3000 psi
Bob-Tach™ quick-attach system mounted to the loader
Hydraulics supplied by quick couplers with pressure-release system
Hydraulics activated by variable-rate fingertip controls
machines first-class features,
top performance, with Bobcat
Cargo Box and
Machine Capacities
Cargo Box Volume
Cargo Box Size
(length x width x height)
Bed Height (from ground)
Cargo Box Lift
Cargo Box Maximum Load
Machine Rated Capacity (combined weight
of load on lift-arm, cargo box load, operator and passenger)
Total Rated Capacity (combined weight of load
on lift-arm, cargo box load, operator, passenger and tow weight )
Standard Features
toughness and dependability.
18 ft3 (2/3 yard3) - struck
61 x 52 x 10 in.
37 in.
Dual hydraulic cylinders
2000 lb.
Designed and built by Bobcat
2200 lb.
the Toolcat 5600 is backed
Company in the United States,
4200 lb.
All-wheel steer
Automatic glow plugs
Bolt-on box sides
with stake pockets
Cruise control
Driver’s side armrest with Toolcat
Interlock Control System (TICS™)
Engine and hydraulic
monitor with shutdown
Front and rear suspension
Front window with dual wipers
Fuel and temperature gauges
Full-time four-wheel drive
Hand throttle
Hourmeter with
resettable job clock
Hydraulic box lift
Quick-latch tailgate
Rear hitch
Speedometer
Suspension driver’s seat
Tachometer
Three-point seat belt
Two-speed transmission
Variable-speed
hydrostatic drive
Worklights
by unmatched parts and service
support through the worldwide
Bobcat dealer network.
Complies with SAE J1040 / ISO 3471 for roll-over protection (ROPS)
Complies with SAE J1043 / ISO 3449 (level one) for falling object
protection (FOPS)
Snowblower
Snow Blade
Snow V-Blade
NOTE — Where applicable, dimensions are in accordance with Society
of Automotive Engineers (SAE) ANSI and ISO standards. Specifications
and design are subject to change without notice. Pictures of machines
may show other than standard equipment. Bobcat Company complies
with the requirements of ISO 9001 as registered with BSI.
Bobcat Company
P.O. Box 6000 • West Fargo, ND 58078
www.bobcat.com
B-1763
Printed in U.S.A.
KnB-50M-503-#625042-F
Utility Work Machine
You told us what you wanted.
Tight-Turning / Turf-Friendly
THIS IS IT.
The new Toolcat™ 5600
is an entirely new concept
in utility work machines.
It was developed by Bobcat
Company after hundreds
of hours of research with
customer discussion groups
around the nation.
You told us what you wanted
in a machine that would
excel at large property
maintenance and commercial
groundskeeping. Bobcat
engineers went to work,
and after years of planning,
designing and testing,
created a machine like
no other on earth —
the Toolcat 5600!
72 in. Mower
Utility Grapple
Auger
Up To
4,000 LB.
Tow Weight
Angle Broom
Cargo Area with
Hydraulic Dump
Easy Entry
and Exit
44 Horsepower
Kubota Diesel Engine
Another advantage: machines
with conventional steering
require direction changes,
but the 5600 can turn around
without backing up!
Less ground disturbance
All-wheel steering makes
the 5600 ideal for turf and
grass work. That’s because
each axle shares the steering
angle — this, coupled with
dual differentials, allows
sharp turns on grass and
improved surfaces with
little or no damage.
The first of its kind
There’s never been a
machine like the 5600. It’s
designed to have all the best
features of a loader, pickup
truck and attachment carrier.
It will not only take you and
a co-worker to the jobsite,
it will also complete the job
like no other machine can!
ALL-WHEEL STEERING
Tight turns, excellent
maneuverability, turf-friendly
operation — those are just
some of the advantages of
the revolutionary all-wheel
steering system developed
especially for the 5600. With
a 17-foot turning diameter, the
5600 moves with great agility
in surprisingly small spaces.
Hydrostatic Drive
17 ft.
Seeing is believing
The revolutionary Toolcat
5600 is designed to out-lift,
out-pull and out-haul other
machines. Discover the
performance yourself.
See your Bobcat dealer
for a demonstration!
All-Wheel Steer
17
FT.
Turning Diameter
Toolcat
™
Utility Work Machine
Toolcat
™
Suspension
Formed and Welded
Steel Frame
Specifications
Rear
Leaf Springs
Machine
Engine
Weight (no attachments)
Overall Dimensions
(length x width x height)
Wheelbase
Outside Turning Diameter (AWS)
Fuel Capacity
Tire Size
Ground Clearance
Travel Speeds
Low Range
High Range
Reverse
Bobcat Built
5600
44 hp Kubota diesel
4400 lb.
Over the past 50 years, Bobcat
148 x 61 x 81 in.
85 in.
17 ft.
8.3 gal.
27 x 10.5-15 (6-ply)
10.2 in.
Company has revolutionized the
compact equipment industry
with countless innovations
0 - 10 mph
0 - 18 mph
0 - 10 mph
in compact loaders, excavators
Loader
Front
Coil Springs
The suspension system provides many benefits,
including smoother ride at travel speeds; axle
oscillation for better traction; and modulation
of attachment down-force.
18 MPH
Transport Speed
Rated Operating Capacity (ROC)
Lift Height (pivot pin)
Max. Reach (pivot pin)
Roll-Back Angle (at ground level)
Dump Angle (at full lift height)
Loader Control
and attachments. This spirit of
1500 lb.
84 in.
35 in.
21°
38°
Pilot-controlled hydraulic joystick
with integrated float feature
innovation has been channeled
into the new Toolcat product
line to give these unique
Attachment Systems
Hydraulic Flow
16.5 gpm
Hydraulic Pressure
3000 psi
Bob-Tach™ quick-attach system mounted to the loader
Hydraulics supplied by quick couplers with pressure-release system
Hydraulics activated by variable-rate fingertip controls
machines first-class features,
top performance, with Bobcat
Cargo Box and
Machine Capacities
Cargo Box Volume
Cargo Box Size
(length x width x height)
Bed Height (from ground)
Cargo Box Lift
Cargo Box Maximum Load
Machine Rated Capacity (combined weight
of load on lift-arm, cargo box load, operator and passenger)
Total Rated Capacity (combined weight of load
on lift-arm, cargo box load, operator, passenger and tow weight )
Standard Features
toughness and dependability.
18 ft3 (2/3 yard3) - struck
61 x 52 x 10 in.
37 in.
Dual hydraulic cylinders
2000 lb.
Designed and built by Bobcat
2200 lb.
the Toolcat 5600 is backed
Company in the United States,
4200 lb.
All-wheel steer
Automatic glow plugs
Bolt-on box sides
with stake pockets
Cruise control
Driver’s side armrest with Toolcat
Interlock Control System (TICS™)
Engine and hydraulic
monitor with shutdown
Front and rear suspension
Front window with dual wipers
Fuel and temperature gauges
Full-time four-wheel drive
Hand throttle
Hourmeter with
resettable job clock
Hydraulic box lift
Quick-latch tailgate
Rear hitch
Speedometer
Suspension driver’s seat
Tachometer
Three-point seat belt
Two-speed transmission
Variable-speed
hydrostatic drive
Worklights
by unmatched parts and service
support through the worldwide
Bobcat dealer network.
Complies with SAE J1040 / ISO 3471 for roll-over protection (ROPS)
Complies with SAE J1043 / ISO 3449 (level one) for falling object
protection (FOPS)
Snowblower
Snow Blade
Snow V-Blade
NOTE — Where applicable, dimensions are in accordance with Society
of Automotive Engineers (SAE) ANSI and ISO standards. Specifications
and design are subject to change without notice. Pictures of machines
may show other than standard equipment. Bobcat Company complies
with the requirements of ISO 9001 as registered with BSI.
Bobcat Company
P.O. Box 6000 • West Fargo, ND 58078
www.bobcat.com
B-1763
Printed in U.S.A.
KnB-50M-503-#625042-F
Utility Work Machine
You told us what you wanted.
Tight-Turning / Turf-Friendly
THIS IS IT.
The new Toolcat™ 5600
is an entirely new concept
in utility work machines.
It was developed by Bobcat
Company after hundreds
of hours of research with
customer discussion groups
around the nation.
You told us what you wanted
in a machine that would
excel at large property
maintenance and commercial
groundskeeping. Bobcat
engineers went to work,
and after years of planning,
designing and testing,
created a machine like
no other on earth —
the Toolcat 5600!
72 in. Mower
Utility Grapple
Auger
Up To
4,000 LB.
Tow Weight
Angle Broom
Cargo Area with
Hydraulic Dump
Easy Entry
and Exit
44 Horsepower
Kubota Diesel Engine
Another advantage: machines
with conventional steering
require direction changes,
but the 5600 can turn around
without backing up!
Less ground disturbance
All-wheel steering makes
the 5600 ideal for turf and
grass work. That’s because
each axle shares the steering
angle — this, coupled with
dual differentials, allows
sharp turns on grass and
improved surfaces with
little or no damage.
The first of its kind
There’s never been a
machine like the 5600. It’s
designed to have all the best
features of a loader, pickup
truck and attachment carrier.
It will not only take you and
a co-worker to the jobsite,
it will also complete the job
like no other machine can!
ALL-WHEEL STEERING
Tight turns, excellent
maneuverability, turf-friendly
operation — those are just
some of the advantages of
the revolutionary all-wheel
steering system developed
especially for the 5600. With
a 17-foot turning diameter, the
5600 moves with great agility
in surprisingly small spaces.
Hydrostatic Drive
17 ft.
Seeing is believing
The revolutionary Toolcat
5600 is designed to out-lift,
out-pull and out-haul other
machines. Discover the
performance yourself.
See your Bobcat dealer
for a demonstration!
All-Wheel Steer
17
FT.
Turning Diameter
Toolcat
™
Utility Work Machine
Toolcat
™
Suspension
Formed and Welded
Steel Frame
Specifications
Rear
Leaf Springs
Machine
Engine
Weight (no attachments)
Overall Dimensions
(length x width x height)
Wheelbase
Outside Turning Diameter (AWS)
Fuel Capacity
Tire Size
Ground Clearance
Travel Speeds
Low Range
High Range
Reverse
Bobcat Built
5600
44 hp Kubota diesel
4400 lb.
Over the past 50 years, Bobcat
148 x 61 x 81 in.
85 in.
17 ft.
8.3 gal.
27 x 10.5-15 (6-ply)
10.2 in.
Company has revolutionized the
compact equipment industry
with countless innovations
0 - 10 mph
0 - 18 mph
0 - 10 mph
in compact loaders, excavators
Loader
Front
Coil Springs
The suspension system provides many benefits,
including smoother ride at travel speeds; axle
oscillation for better traction; and modulation
of attachment down-force.
18 MPH
Transport Speed
Rated Operating Capacity (ROC)
Lift Height (pivot pin)
Max. Reach (pivot pin)
Roll-Back Angle (at ground level)
Dump Angle (at full lift height)
Loader Control
and attachments. This spirit of
1500 lb.
84 in.
35 in.
21°
38°
Pilot-controlled hydraulic joystick
with integrated float feature
innovation has been channeled
into the new Toolcat product
line to give these unique
Attachment Systems
Hydraulic Flow
16.5 gpm
Hydraulic Pressure
3000 psi
Bob-Tach™ quick-attach system mounted to the loader
Hydraulics supplied by quick couplers with pressure-release system
Hydraulics activated by variable-rate fingertip controls
machines first-class features,
top performance, with Bobcat
Cargo Box and
Machine Capacities
Cargo Box Volume
Cargo Box Size
(length x width x height)
Bed Height (from ground)
Cargo Box Lift
Cargo Box Maximum Load
Machine Rated Capacity (combined weight
of load on lift-arm, cargo box load, operator and passenger)
Total Rated Capacity (combined weight of load
on lift-arm, cargo box load, operator, passenger and tow weight )
Standard Features
toughness and dependability.
18 ft3 (2/3 yard3) - struck
61 x 52 x 10 in.
37 in.
Dual hydraulic cylinders
2000 lb.
Designed and built by Bobcat
2200 lb.
the Toolcat 5600 is backed
Company in the United States,
4200 lb.
All-wheel steer
Automatic glow plugs
Bolt-on box sides
with stake pockets
Cruise control
Driver’s side armrest with Toolcat
Interlock Control System (TICS™)
Engine and hydraulic
monitor with shutdown
Front and rear suspension
Front window with dual wipers
Fuel and temperature gauges
Full-time four-wheel drive
Hand throttle
Hourmeter with
resettable job clock
Hydraulic box lift
Quick-latch tailgate
Rear hitch
Speedometer
Suspension driver’s seat
Tachometer
Three-point seat belt
Two-speed transmission
Variable-speed
hydrostatic drive
Worklights
by unmatched parts and service
support through the worldwide
Bobcat dealer network.
Complies with SAE J1040 / ISO 3471 for roll-over protection (ROPS)
Complies with SAE J1043 / ISO 3449 (level one) for falling object
protection (FOPS)
Snowblower
Snow Blade
Snow V-Blade
NOTE — Where applicable, dimensions are in accordance with Society
of Automotive Engineers (SAE) ANSI and ISO standards. Specifications
and design are subject to change without notice. Pictures of machines
may show other than standard equipment. Bobcat Company complies
with the requirements of ISO 9001 as registered with BSI.
Bobcat Company
P.O. Box 6000 • West Fargo, ND 58078
www.bobcat.com
B-1763
Printed in U.S.A.
KnB-50M-503-#625042-F
Utility Work Machine
You told us what you wanted.
Tight-Turning / Turf-Friendly
THIS IS IT.
The new Toolcat™ 5600
is an entirely new concept
in utility work machines.
It was developed by Bobcat
Company after hundreds
of hours of research with
customer discussion groups
around the nation.
You told us what you wanted
in a machine that would
excel at large property
maintenance and commercial
groundskeeping. Bobcat
engineers went to work,
and after years of planning,
designing and testing,
created a machine like
no other on earth —
the Toolcat 5600!
72 in. Mower
Utility Grapple
Auger
Up To
4,000 LB.
Tow Weight
Angle Broom
Cargo Area with
Hydraulic Dump
Easy Entry
and Exit
44 Horsepower
Kubota Diesel Engine
Another advantage: machines
with conventional steering
require direction changes,
but the 5600 can turn around
without backing up!
Less ground disturbance
All-wheel steering makes
the 5600 ideal for turf and
grass work. That’s because
each axle shares the steering
angle — this, coupled with
dual differentials, allows
sharp turns on grass and
improved surfaces with
little or no damage.
The first of its kind
There’s never been a
machine like the 5600. It’s
designed to have all the best
features of a loader, pickup
truck and attachment carrier.
It will not only take you and
a co-worker to the jobsite,
it will also complete the job
like no other machine can!
ALL-WHEEL STEERING
Tight turns, excellent
maneuverability, turf-friendly
operation — those are just
some of the advantages of
the revolutionary all-wheel
steering system developed
especially for the 5600. With
a 17-foot turning diameter, the
5600 moves with great agility
in surprisingly small spaces.
Hydrostatic Drive
17 ft.
Seeing is believing
The revolutionary Toolcat
5600 is designed to out-lift,
out-pull and out-haul other
machines. Discover the
performance yourself.
See your Bobcat dealer
for a demonstration!
All-Wheel Steer
17
FT.
Turning Diameter
Tiller
Landplane
Unmatched Ergonomics
Soil Conditioner
Operator comfort is second to none,
with conveniently-placed, easy-to-use
controls; excellent visibility; comfortable
suspension seat and armrests; and tilt
steering wheel.
Two-Seat Cab
Great Visibility
Roll-over and Falling
Object Protection
(ROPS/FOPS approved)
Easy-To-Use
Controls
World-Famous
Bobcat
Attachments
Optional Cab Enclosure
The cab is enclosable,
with doors, heater
and air conditioning
as factory options.
Front AND Rear
Suspension
A hydraulic joystick provides
smooth control of loader
functions, and includes
a lift-arm “float” feature.
4-Wheel Drive
Built To Perform
ATTACHMENTS
HYDROSTATIC DRIVE SYSTEM
2,000 LB.
A special hydrostatic transmission gives
Toolcat machines high axle torque, simple
shifting and excellent speed control.
Cargo Box Capacity
High axle torque, coupled with
4-wheel drive, delivers plenty of power
for filling buckets, pulling heavy
implements and trailers, and pushing
large amounts of material.
With a wide variety of Bobcat
built attachments available,
Toolcat machines can handle
many applications, including
your toughest jobs from
mowing to dirt work. And with
the industry standard Bob-Tach™
system, attachment changes
are easily accomplished by one
person in a matter of minutes.
Visibility. In designing the
5600, special attention was
placed on attachment visibility.
Because the attachments are
front-mounted, they can be
easily seen during connection
and operation.
Shifting between low and high range
can be done on-the-fly and while under
power, so you’re always in the right gear.
Travel direction is changed with a
shuttle lever. You get easy, synchronized
changes in direction with no gear
grinding — and no clutch to maintain!
Efficiency. Front-mounted
attachments also have the
advantage of allowing the work
to be done before driving over
the work area. This is particularly
helpful for mowing, sweeping
and snow removal applications.
Variable speed control is simple.
The drive pedal finds the exact speed
you need.
Cruise control and the speedometer
make it easy to repeat and hold the right
speed for jobs such as mowing, spraying
and spreading sand.
Other attachment features:
ALL-WHEEL STEER (AWS)
• In-cab attachment controls
• Hydraulic quick couplers
with pressure release
• Variable hydraulic flow
• Dual direction detent
Box Scraper
Angle Broom
44 HORSEPOWER
Kubota Diesel Engine
The front loader, with its
excellent lifting capacity
and reach, dumps into many
truck and container sizes.
FOUR-WHEEL DRIVE
Toolcat machines fit through
7-foot door openings.
Tiller
Landplane
Unmatched Ergonomics
Soil Conditioner
Operator comfort is second to none,
with conveniently-placed, easy-to-use
controls; excellent visibility; comfortable
suspension seat and armrests; and tilt
steering wheel.
Two-Seat Cab
Great Visibility
Roll-over and Falling
Object Protection
(ROPS/FOPS approved)
Easy-To-Use
Controls
World-Famous
Bobcat
Attachments
Optional Cab Enclosure
The cab is enclosable,
with doors, heater
and air conditioning
as factory options.
Front AND Rear
Suspension
A hydraulic joystick provides
smooth control of loader
functions, and includes
a lift-arm “float” feature.
4-Wheel Drive
Built To Perform
ATTACHMENTS
HYDROSTATIC DRIVE SYSTEM
2,000 LB.
A special hydrostatic transmission gives
Toolcat machines high axle torque, simple
shifting and excellent speed control.
Cargo Box Capacity
High axle torque, coupled with
4-wheel drive, delivers plenty of power
for filling buckets, pulling heavy
implements and trailers, and pushing
large amounts of material.
With a wide variety of Bobcat
built attachments available,
Toolcat machines can handle
many applications, including
your toughest jobs from
mowing to dirt work. And with
the industry standard Bob-Tach™
system, attachment changes
are easily accomplished by one
person in a matter of minutes.
Visibility. In designing the
5600, special attention was
placed on attachment visibility.
Because the attachments are
front-mounted, they can be
easily seen during connection
and operation.
Shifting between low and high range
can be done on-the-fly and while under
power, so you’re always in the right gear.
Travel direction is changed with a
shuttle lever. You get easy, synchronized
changes in direction with no gear
grinding — and no clutch to maintain!
Efficiency. Front-mounted
attachments also have the
advantage of allowing the work
to be done before driving over
the work area. This is particularly
helpful for mowing, sweeping
and snow removal applications.
Variable speed control is simple.
The drive pedal finds the exact speed
you need.
Cruise control and the speedometer
make it easy to repeat and hold the right
speed for jobs such as mowing, spraying
and spreading sand.
Other attachment features:
ALL-WHEEL STEER (AWS)
• In-cab attachment controls
• Hydraulic quick couplers
with pressure release
• Variable hydraulic flow
• Dual direction detent
Box Scraper
Angle Broom
44 HORSEPOWER
Kubota Diesel Engine
The front loader, with its
excellent lifting capacity
and reach, dumps into many
truck and container sizes.
FOUR-WHEEL DRIVE
Toolcat machines fit through
7-foot door openings.