Sunleaves Micro-Sun

Transcription

Sunleaves Micro-Sun
Sunleaves Micro-Sun
Thank you for choosing to grow with Sunleaves Garden
Products! Your satisfaction and success are important to
us. For best results, carefully read the following instructions
before using your Sunleaves Micro-Sun.
Features of your Sunleaves Micro-Sun
• Highly-reflective European specular aluminum increases efficiency by maximizing light exposure
• Well-vented heavy-duty housing features durable, enamel-coated finish and four-inch flange
• Built-in digital ballast allows you to use metal halide and high pressure sodium lamps
• Glass lens, hanging hardware and integrated eight-foot power cord included
• Five-year ballast warranty
• Backlit power switch and built-in breaker
Using the Sunleaves Micro-Sun
The Sunleaves Micro-Sun is compatible with horizontal or universal-type metal halide or high pressure sodium lamps of the
appropriate wattage.
Instructions:
1. Remove the Sunleaves Micro-Sun Lens by rotating the retainer tab up and carefully sliding the lens out.
2. Screw a metal halide or high pressure sodium lamp of appropriate wattage securely into the socket.
3. Carefully slide the lens back into place and secure it by rotating the retainer tab back down.
4. Attach the provided hanging hardware to the fixture housing. Be sure the hooks are secure, then hang the fixture with a chain or strong cord. The fixture should hang level.
5. Plug the three-pronged power cord into a grounded 120V receptacle and turn the unit on.
Troubleshooting:
If you’re having problems with your Sunleaves Micro-Sun, try the following solutions first:
Make sure that all plugs, cords and other external electrical elements are properly installed.
Check the outlet and breaker to ensure that power is being supplied to the Micro-Sun. If the breaker is tripped, turn the unit
off and unplug the cord from the power supply. Wait five minutes for the system to cool, then plug the power cord back in.
Push the white breaker button, then flip the Micro-Sun’s power switch back on.
Examine the lamp for damage or other problems. (ONLY IF THE LAMP IS COOL ENOUGH TO TOUCH. IF THE LAMP WAS
POWERED ON AND SUDDENLY STOPPED WORKING, ALLOW IT TO COOL BEFORE CHECKING IT. NEVER TOUCH A HOT
LAMP). Make sure the lamp is the correct wattage and type for your system. The Sunleaves Micro-Sun will only operate properly with a lamp of the same wattage.
Is it time to clean your bulb or lens? Make sure the
system is unplugged and completely cool before proceeding.
6/2011
Sunleaves 5-Year Limited Warranty
Sunleaves Garden Products (“Sunleaves”) provides warranty to the original purchaser of this Sunleaves Micro-Sun with
respect to the ballast transformer components, as may be applicable, and that the same is free of defective
materials and workmanship. The warranty period extends for five (5) years (3 years full warranty then 2 years pro-rated
warranty) from the date of purchase.
If Sunleaves, in its sole discretion, determines that the components are defective in material or workmanship then
Sunleaves, at its option, will either repair or replace the components at authorized repair centers provided, however,
that (1) a copy of the original proof of purchase for this product by the original purchaser is delivered to Sunleaves
or its authorized repair center, (2) the components have not been tampered with, disassembled, repaired by unauthorized persons, or altered, or (3) the components have not been damaged as a result of commercial use, lack of
reasonable and proper maintenance, abusive, unreasonable use or supplemental damage. In no event shall the
cost of repair or replacement exceed the original purchase price. SUNLEAVES SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, DAMAGE OR INJURY
CAUSED TO OTHER PRODUCTS, MACHINERY, BUILDINGS, PROPERTY, LOST PROFITS, LOSS OF TIME, LOSS OF PRODUCT
OR INCONVENIENCE. SUNLEAVES FURTHER DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
To obtain warranty service, return the fixture to the place of purchase in accordance with store policy, or to Sunleaves
Garden Products within the guidelines of the Return Authorization Process. The Return Authorization Process will be
outlined for you when you contact Sunleaves Garden Products at the phone number or email address below.
Sunleaves Garden Products
7854 North State Road 37
Phone: 888-464-9676
Bloomington, IN 47404
Email: [email protected]
6/2011