STOCK BOOK

Transcription

STOCK BOOK - EH Price Vancouver

BRITISH COLUMBIA
STOCK BOOK
Vancouver
EFFECTIVE: December 1, 2010
REPLACES: November 15, 2009
www.ehpricevancouver.com
INDEX
Product
Louvers
MA6774X
BRITISH COLUMBIA STOCK BOOK
Description
Page #
High Performance Louver 1
Fire Dampers EH Price Grilles, Registers & Diffusers
Prodigy
VPD-HC, VPD-C
SCD
SCDA
SPD
RCDE
RCDA
Diffuser Accessories
SPF
520
520D
530
530D
80, 80D
STG1
1900-A
80 Core
PD
LTA, LP, KD
LTA 10-4
2
Prodigy Self-Modulating Diffuser
3
Varitherm VAV Diffuser 4
Round Neck Diffusers
5
Round Neck Diffusers
6
Square Plaque Diffusers
6
Round Cone Diffuser 7
Adjustable Round Cone Diffuser 7
Dampers
8
Surface Mount Adaptor Frame
8
Double Deflection Louvered Supply Grille w/o Damper 9
Double Deflection Louvered Supply Grille w/ Damper 10
Fixed Louver Return Grilles w/o Damper
11
Fixed Louver Return Grilles w/ Damper
12
Egg Crate Return Grille
13
Transfer/ Door Grilles
14
Fired-Rated Transfer/ Door Grilles
14 Egg Crate Return
14
Plug-in Diffusers
15
Light Troffer Diffusers with Adjustable Pattern
16
Light Troffer Diffusers
16
EH Price Terminal Units
SPV5000, SPV8000
LGB
Terminal Accessories
EHC1
CP101, CP100
Flexible Duct
S-LD
S-LP-10
S-TL
M-KE
Flex Accessories
Fans & Ventilation
GB
G
CUBE
CUE
BSQ
CW
CSP
SP
SSC, CK
Single Duct VAV Boxes
By-Pass Boxes Attenuator Sections, Water Reheat Coil Sections
Electric Cooling/Heating Changeover Pneumatic Controller
17
17
18
19
20
Non-Insulated Flexible Connector
Insulated Flex Duct
Gear Clamps, Plastic Straps 21
21
22
22
23
Greenheck Centrifugal Roof Exhausters
Greenheck Direct Drive Centrifugal Roof Exhausters
Greenheck Centrifugal Roof Exhausters, Upblast
Greenheck Direct Drive Centrifugal Roof Exhausters
Greenheck Centrifugal Inline Fans
Greenheck Direct Drive Centrifugal Sidewall Exhausters
Greenheck Cabinet Exhaust Fan
Greenheck Ceiling Exhaust Fan
Greenheck SP & CSP Accessories
24
25
26
27
28
29
30
31
33
First in Quality, First in Service
INDEX
Product
Description
Page #
Fans & Ventilation
SWB
FV Series
LX70, LX90, LX110
XDF200, XDF300
Greenheck Centrifugal Utility Fans
Whisper Line™ Ventilation Fan from Panasonic
Lexton Prestige Series
Lexton Xlerator Series Dryer Booster Fan
37
33
35
36
Box Spring Isolators Hanging Vibration Isolators 38
38
Spring Isolators
SSH
CK
Motor and Fan Controllers
5W / 10W T1033
GTD
Greenheck Fan Speed Controls
Aube Programmable Switch
Greenheck Time Delay Switch
39
39
39
Honeywell Gas Detector
40
Gas Detectors
VA301M
www.ehprice vancouver.com
1
MA6774X - High Performance Louver
Drainable Blade Louvers
4" (102 mm) Deep
Optiona
l: 1
1/2 [3
8] Flanges
1 1/2[38]
• Screw assembled construction:
#10 x 1" plated steel screws.
Visible Mullion
Louver Type:
MA6774X
Material:
Extruded Aluminum
(Alloy 6063-T6)
Stationary Blade:
.064" (1.6 mm)
Jambs:
.081" (2.0 mm)
Head and Sill:
.064" (1.6 mm)
Louver Depth:
4" (102 mm)
Blade Angle:
45o at center
Free Area - 4' x 4' Unit:
9.00 sq.ft.
(0.836 sq.m.)
Percent Free Area:
1/4 [6]
• Constructed with 14 ga.reinforced
aluminum blades.
56.2%
• Nominal 56% free area (based
on 48" x 48").
• Integral perimeter caulking stop.
• Optional 1.5" flanges available
as add-ons.
Section Si
ze Limits
Minimum
Width
6
(152)
Height
8
(203)
Area
• Optional bird screens available
in Mill finish.
Maximum
72
(1829)
• Fabricated in Burnaby; Immediate
Delivery.
144
(3658)
60 SQ.
FT.
(5.5
8 SQ.
M.)
Head
Exterior
Exterior
1/4 [6]
Opening Width
Louver Width
1/4 [6]
1/4 [6]
Jamb
Jamb
4 [102]
Ctr.
Louver Height
Opening Height
1.16 [29]
Top View - Horizontal Section
Sill
Vertical Section
2
Fire Dampers
(2”)
TRUE ROUND FIRE
DAMPERS
6X6
8” ø
8X8
10” ø
10 X 4
12” ø
10 X 6
14” ø
10 X 8
16” ø
10 X 10
ADJUSTABLE CEILING
RADIATION DAMPERS C/W
THERMAL BLANKET
TYPE-A VERTICAL
12 X 6
12 X 8
12 X 10
12 X 12
14 X 14
16 X 16
TYPE-A HORIZONTAL
FIRE DAMPERS
6” ø
8” ø
10” ø
12” ø
14” ø
TYPE-C HORIZONTAL
FIRE DAMPERS
DAMPERS C/W THERMAL
BLANKET
6X4
14 X 8
18 X 14
22 X 16
4” ø
12 X 12
6X6
14 X 10
18 X 16
22 X 18
5” ø
24 X 6
24 X 12
8X4
14 X 12
18 X 18
22 X 20
6” ø
8X6
14 X 14
20 X 6
22 X 22
7” ø
24 X 24
8X8
16 X 4
20 X 8
24 X 4
8” ø
10 X 4
16 X 6
20 X 10
24 X 6
9” ø
10 X 6
16 X 8
20 X 12
24 X 8
10” ø
THERMAL BLANKETS
24” WIDE – SOLD BY PER
FOOT (1/8”)
10 X 8
16 X 10
20 X 14
24 X 10
12” ø
24 X 24 (1 ¼”)
10 X 10
16 X 12
20 X 16
24 X 12
14” ø
12 X 4
16 X 14
20 X 18
24 X 14
16” ø
12 X 6
16 X 16
20 X 20
24 X 16
18” ø
ALL ADDITIONAL SIZES &
TYPES AVAILABLE FOR
CUSTOM ORDER ON
24HR, 2
12 X 8
18 X 4
22 X 6
24 X 18
20” ø
12 X 10
18 X 6
22 X 8
24 X 20
24” ø
12 X 12
18 X 8
22 X 10
24 X 24
14 X 4
18 X 10
22 X 12
SLIMLINE FIRE DAMPERS
14 X 6
18 X 12
22 X 14
CEILING RADIATION
DAY, 3 DAY, 5 DAY, 10
DAY &
STANDARD BUILD
3
PRODIGY - Personal Self-Modulating Diffusers
PRICE Prodigy®
PPD2 is suitable for applications that require dedicated heating and cooling cycles.
To properly sense room temperature while in the heating mode, the unit features a
wall thermostat with temperature sensor.
Performance Data - Maximum Flow Selection Table
Neck Velocity
Inlet Size Velocity Pressure
8”
10”
Static Pressure
Total Pressure
CFM
NC
500
0.016
600
0.022
700
0.031
800
0.040
900
0.050
1000
0.062
0.035
0.045
140
_
0.054
0.070
175
17
0.077
0.099
209
22
0.105
0.136
244
26
0.137
0.177
279
30
0.174
0.224
314
34
0.215
0.277
349
37
Throw, ft.
2-3-7
3-4-7
3-5-8
4-6-9
5-7-9
5-7-10
6-7-11
Static Pressure
0.031
0.049
0.070
0.096
0.124
0.158
0.194
Total Pressure
CFM
NC
0.041
218
_
0.064
273
19
0.092
327
24
0.126
382
29
0.164
436
33
0.208
491
36
0.257
545
39
4-5-9
4-7-11
5-8-12
6-9-12
7-9-13
8-10-14
9-11-15
0.056
0.056
314
19
5-8-11
0.071
0.087
393
25
6-9-13
0.103
0.125
471
30
8-10-14
0.140
0.171
550
35
9-11-15
0.183
0.222
628
38
9-11-16
0.231
0.282
707
42
10-12-17
0.285
0.348
785
45
10-13-18
Throw, ft.
12”
400
0.010
Static Pressure
Total Pressure
CFM
NC
Throw, ft.
Prodigy Series
Model PPD2
VAV Cooling and VAV Heating
Wall Mounted T-Stat
Features:
• Thermostat with room temperature sensor for heating mode.
• Face mounted room temperature
sensor for cooling mode.
• Setpoint adjustment at the
thermostat.
• T-Bar mounting frame for 24 x 24
grids.
• B12 White Finish.
• Optional mounting for drywall
ceilings.
• Optional relief collar for pressure
relief.
• Optional 120 V / 24 V transformers.
4
VPD-HC/VPD-C - Varitherm
Performance Data - Maximum Flow Selection Table
Neck Velocity
Inlet Size Velocity Pressure
6”
8”
10”
12”
Static Pressure
Total Pressure
CFM
NC
Throw, ft.
Static Pressure
Total Pressure
CFM
NC
400
0.010
500
0.016
600
0.022
700
0.031
800
0.040
900
0.050
1000
0.062
0.014
0.024
79
_
1-2-4
0.022
0.032
140
_
0.021
0.037
98
_
2-2-5
0.034
0.050
174
_
0.031
0.053
118
_
2-3-6
0.049
0.072
209
18
0.042
0.072
137
17
2-3-6
0.067
0.097
244
23
0.054
0.094
157
21
2-4-7
0.087
0.127
279
27
0.069
0.119
177
24
3-4-7
0.110
0.161
314
30
0.085
0.147
196
28
3-5-8
0.136
0.199
349
33
Throw, ft.
2-3-7
3-4-7
3-5-8
4-6-9
5-7-9
5-7-10
6-7-11
Static Pressure
0.030
0.047
0.068
0.092
0.120
0.152
0.188
Total Pressure
CFM
NC
0.041
218
_
0.063
273
17
0.090
327
23
0.123
382
27
0.160
436
31
0.203
491
35
0.250
545
38
Throw, ft.
4-5-9
4-7-11
5-8-12
6-9-12
7-9-13
8-10-14
9-11-15
0.038
0.048
314
_
5-8-11
0.060
0.076
393
21
6-9-13
0.086
0.109
471
26
8-10-14
0.118
0.148
550
31
9-11-15
0.154
0.194
628
35
9-11-16
0.195
0.245
707
39
10-12-17
0.240
0.302
785
42
10-13-18
Static Pressure
Total Pressure
CFM
NC
Throw, ft.
Performance Notes:
1. Performance data is presented for the Varitherm® diffuser with the damper in the full open (maximum flow) position.
2. Tested in accordance with ASHRAE Standard 70-1991 “Method of Testing for Rating the Performance of Air Outlets
and Inlets”
3. Air flow is in cubic feet per minute, CFM.
4. All pressures are in inches of water.
5. Throw values are given in feet to terminal velocities of 150-100-50 fpm.
6. Throw data is based on supply air and room air at isothermal conditions.
7. The NC values, sound pressure level, are based on a room absorption of 10 dB re 10-12 watts and one diffuser.
8. Blanks “—” indicate an NC level below 15.
24 x 24
(610 x 610)
600 x 600
• Thermal elements for consistent,
repeatable performance
• Hinged faceplate, with powerful
magnetic closure ensures simple
yet strong cloure, that also allows
for quick access to adjustment
features
• Specially engineered damper
stack for reduced linkage binding
and superior performance over
the entire operating range
• For heating/cooling systems
• Optional relief collar for pressure
relief
Nom. Duct
Nom. Duct 1/
-4" (3)
Nominal
Duct
6,8,10,12
(152,203,254,305)
• Steel backpan, faceplate and
linkage for strength and durability
Ceiling Module
Dimensional Data - Imperial (Inches) / Metric (mm)
Ceiling Module
Imperial
Metric
VPD-HC/VPD-C
Varitherm
Thermally Powered
VAV Diffuser
3 15/16"
(101)
2 1/2"
(64)
Diffuser Plaque
5
SCD - Round Neck Diffusers
NC 30
SCD / 3P
Size
SCD/31 (T-Bar & Panel)
(T-Bar
Panel)
12 x 12
24 x 24
24 x 24
Radius of
Diffusion
CFM
NC 25
NC 30
VT = 50
5
163
190
8
6
209
243
8
7
249
302
10
8
305
361
11
6
215
251
6
8
340
405
8
10
491
581
8
12
654
785
10
14
855
998
11
15
951
1104
12
SCD/31/24x24/B12
Square Cone Diffusers
SCD/3P/24x24/B12
Square Cone Diffusers -12x12
Diffuser in a 24 x 24 Panel
• Steel construction
• True 360º radial horizontal
NC 30
SCD/3 (T-Bar)
Size
20 x 20
CFM
Radius of Diffusion
• Special contour design prevents
smudging and streaking
NC 25
NC 30
VT = 50
6
189
227
5
• Excellent performance for VAV
applications
8
314
377
6
• T-Bar or surface mount
10
463
545
7
• Available in panels to fit standard
module dimensions
• 4th cone available
Note: T-Bar diffusers are stocked with seismic restraint attachment points.
Type 31 - T-Bar Mount
Type 31 - Surface Mount
Type 31 - T-Bar Mount,
Type 3P - T-Bar Mount,
20 x 20 module
Panel Module
6
SCDA - Round Neck Diffusers
CFM
NC 30
Radius of
Diffusion
Duct
NC 25
NC 30
NC 35
VT = 100
S.P.
6 186213250
4
.05
8 305349407
7
.07
10 450518600
8
.09
12 609707811
14
790
920
9
.09
1060
10.10
Performance Notes:
1. Throw data based on supply air and room air being at isothermal conditions.
2. S.P. shown in inches of water.
3. The above performance data is for horizontal projection. For vertical performance data, see the Price Air Distribution
Products catalogue.
SCDA/3/24x24/B12
Adjustable Square Cone Diffusers 24 x 24 Full Face Model T-Bar
Mount
• True 360º radial horizontal air
pattern
• Adjustable pattern controllers
to provide either a horizontal or
vertical air pattern for heating
and cooling applications.
• Excellent performance for VAV
applications
• Special contour design prevents
smudging and streaking
• T-Bar mounting frame for 24 x 24
grids
• B12 White Finish
• 4th cone available
SPD - Square Plaque Diffusers
NC 30
SPD/31
Size
12 x 12
CFM
24 x 24
20 x 20
Radius of Diffusion
NC 25
NC 30
VT = 50
6
210
245
8
8
330
385
10
10
470
545
12
12
625
725
14
5
Type 31 - T-Bar
SPD/31/24x24/B12
Square Plaque Diffusers 24 x 24 Full Face Model
• Radial horizontal air pattern
• Excellent performance for VAV applications
Type 31 - Surface Mount
• B12 White Finish
Note: T-bar diffusers are stocked with seismic restraint attachment points.
7
RCDE - 2 Position
CFM
NC 30
Radius S.P.
of Diffusion
Horizontal
Size
NC 25
NC 30
NC 35
VT = 100
Position
6 175200235
6
.10
8 240275325
7
.09
10 425490580
9
.09
12 610705805
11
.08
14 680800930
12
.10
RCDE/B12
2 Position
Round Cone Diffuser
Performance Notes:
1. Radius of diffusion shown in feet, based on horizontal air pattern and 20°F cooling differential.
Dimensional Data — Imperial (inches) / Metric (mm)
Nominal Size
A
B
D
E
F
611 /8 (283)6 /2 (165)
6 (152)
1 /4 (45)
1 /8 (29)
8
8 (203)
2 /8 (54)
11/2 (38)
1
1
14 /4 (375)8 /2 (216)
3
1
3
1
1
1018 /4 (464)10 /2 (267)
10 (254)
2 /8 (73)21/8 (54)
12
22 (559)
121/2 (318)
12 (305)
31/8 (79)23/8 (60)
14
26 (660)
14 /2 (368)
14 (356)
33/4 (86)25/8 (67)
1
1
1
7
RCDA - Adjustable
CFM
NC 30
Radius
S.P.
of Diffusion
Horizontal
Size
NC 25
NC 30
NC 35
VT = 100
Position
6 165195228
5
.07
8 275325385
6
.06
10 415490580
8
.06
12 590685810
9
.06
14
770
16
980
880
1060
10.05
1155 1365
11.05
Performance Notes:
1. Radius of diffusion shown in feet, based on horizontal air pattern and 20°F cooling differential.
RCDA/B12
Adjustable Round
Cone Diffuser
Dimensional Data — Imperial (inches)/Metric (mm)
Nominal
Size
ABCDEF
Diffuser Overall Dia. = A
Ceiling Opening Dia. = B
Nom. Duct Size = D
6131/2 (343)
12 (305)
15/8 (41)
6 (44)
13/4 (44)
8
18 (457)
16 (406)
21/8 (54)
8 (56)
23/16 (56)
13/16 (30)
10
22 /2 (572)
20 (508)
2 /8 (67)
10 (68)
2 /16 (68)
17/16 (37)
12
27 (686)
24 (610)
31/4 (83)
12 (79)
31/8 (79)
15/8 (41)
C
14
311/2 (800)
28 (711)
33/4 (95)
14 (100)
315/16 (100)
115/16 (49)
E = Open
F = Closed
36 (914)
32 (813)
41/4 (108)
16 (108)
41/4 (108)
21/4 (57)
16
1
5
11
/16 (24)
15
O.D. Neck = D - 1/32” [3]
3/4” [19]
8
DIFFUSER ACCESSORIES
VCR7
Radial Opposed Blade Damper
VCR8E
Butterfly Damper
6"
10"
5"
8"
12"
7"
6"
8"
14"
15"
10"
12"
14"
15"
SPF - Drywall Frame for Access into Ceiling
Ceiling Opening = Nom. Size + .250" (6)
24 x 24 Ceiling Diffusers
and Registers
12x12
20x20
24x24
500" Ref.
(13)
Inside Stack = Nom. Diffuser Size
1.528"
(39)
1.250"
(32)
Ceili
ng byOthers
.125"
(3)
Overall Opening = Nom. Diffuser - .937" (24)
Overall Plaster Frame. =Diffuser
Nom
+ 1.562" (40)
.125"
(3)
.250"(6
.1.2
50"
(32)
9
520 - Double Deflefection - No Damper
8 x 6 239277324
10 x 6 293352410
10 x 8 383447532
12 x 6 333390470
12 x 8 480566672
14 x 8 534643760
14 x 12 430505590
16 x 8 629741890
16 x 10 675797936
37/8” [90]
1/4” [6]
D= Nom. Duct Size
6 x 4 108128180
Grille Face Opening = D -3/4” [19]
Grille Face Opening = D+3/4” [45]
CFM
Size
NC 25
NC 30
NC 35
11/4” [32]
3/4”
[19]
520/F/S/A/B12
Double Deflection Louvered
Supply Grilles w/o Damper
Optional
Damper
Performance Notes:
2” [51]
F - Border
S - Blades in front to short
dimension
A - Screw hole fastenings
10
520D - Double Deflefection c/w Damper
CFM
NC 30
Throw
Size
NC 25
NC 30
NC 35
VT = 100
S.P.
30 x 6
30 x 8
30 x 10
30 x 12
36 x 18
36 x 24
40.064
46
.063
50
.054
55
.077
64
.044
71
.029
776
927
1105
107012611473
127815041772
151117722089
265631083676
326038154490
Performance Notes:
520D/F/S/A/B12
Double Deflection Louvered
Supply Grilles w/ Damper
11/4" (32
)
37/8" (99)
1/4"(6)
D= Nom. Duct S
ize
16
.10
18
.10
18
.10
22
.093
26
.084
20
.098
24
.089
26
.084
31
.075
22
.093
26
.084
31
.075
33
.074
37
.054
23
.090
26
.084
33
.074
32
.049
36.045
38.044
23
.065
30
.084
34
.071
37
.067
38.044
31
.075
37
.067
44.063
43
.041
33
.074
30
.050
35
.071
41.063
46
.058
49
.054
59
.048
66
.044
3/4" (1
Grill
e FaceOpening =D 9)
6 x 4 108128180
6 x 6 170200235
8 x 4 170200235
8 x 6 239277324
8 x 8 333390470
10 x 4 205243283
10 x 6 293352410
10 x 8 383447532
10 x 10 480566672
12 x 4 239277324
12 x 6 333390470
12 x 8 480566672
12 x 10 534643760
12 x 12 675797936
14 x 4 266312372
14 x 6 383447532
14 x 8 534643760
14 x 10 620730860
14 x 12
785
930
1095
14 x 14
855
1005
1190
16 x 4 300350415
16 x 6 430505590
16 x 8 629741890
16 x 10 675797936
16 x 12
855
1015
1190
18 x 6 480566672
18 x 8 675797936
18 x 12
973
1147
1340
18 x 14 111513101535
20 x 6 534643760
24 x 4 430505590
24 x 6 659776932
24 x 8
855
1012
1180
24 x 10 104512371450
24 x 12 122414401697
24 x 18 178220852500
24 x 24 224226203096
Grille
Frame Overal
l =D +
13/4" 45)
(
3/4"
(19)
Opti
onal
Damp er
2" 51)
(
F - Border
S - Blades in front to short
dimension
A - Screw hole fastenings
11
530 - Fixed Louvers No Damper
CFM
NC 30
NC 35
6 x 6
8 x 4
8 x 6
8 x 8
10 x 4
10 x 6
10 x 8
10 x 10
12 x 6
12 x 8
12 x 10
12 x 12
14 x 6
110
110
156
225
132
200
255
315
225
315
370
470
255
130
130
185
265
160
238
310
390
265
390
450
570
310
162
162
215
320
195
275
368
480
320
480
540
682
368
14 x 8
370
14 x 10
470
14 x 12
590
14 x 14
590
16 x 6
290
16 x 8
470
16 x 10
510
16 x 12
590
16 x 14
725
16 x 16
800
18 x 6
315
18 x 8
470
18 x 10
590
18 x 12
670
18 x 14
845
18 x 18
980
20 x 10
590
20 x 12
770
20 x 14
945
20 x 16
1075
20 x 20
1140
24 x 6
470
24 x 8
590
24 x 10
725
24 x 12
860
24 x 161140
24 x 181300
24 x 241023
30 x 8
670
30 x 10860
30 x 121075
30 x 181624
30 x 242020
36 x 121395
36 x 181930
36 x 242450
450
540
570
615
710
850
725
855
342
416
570
615
615
735
725
840
870
1045
960
1120
390
480
570
682
710
850
804
950
1020
1220
1210
1456
725
840
930
1100
1130
1360
1290
1550
1380
1670
570
682
725
840
880
1050
1040
1260
1380 1670
1550 1890
1232 1500
804
950
10401260
1290 1550
1950 2345
2425 2910
1670 2000
2290 2788
2910 3450
530/F/L/A/B12
Single Deflection Fixed Blade
Louvered Return Grilles
45
0
1/4" (6
)
1 1/4" (3
2)
Performance Notes:
D = Nomin
alDuct
NC 25
3/4" 19)
(
Size
Opening = D - 3/4" (1
9)
Overal
l =D +1 3/4" (44
)
12
530D - Fixed Louvers c/w Damper
CFM
Size
NC 25
NC 30
10 x 8 250300
10 x 10 324390
12 x 6 226366
12 x 8 280390
12 x 10 320460
12 x 12 473569
Performance Notes:
11/4"
(32)
D= Nom. Duct Size
8 x 8 226266
Grille Face Opening = D -3/4" (19)
6 x 6 93112
Grille Frame Overall = D +13/4" (45)
23/4" (71)
11/4" (32)
3/4"
(19)
Optional
Damper
1/4"
(6)
530D/F/L/A/B12
Single Deflection Fixed Blade
Louvered Return Grilles
13
Egg Crate Returns
CFM
Size
NC 25
NC 30
6x6
8x4
8x6
8x8
10 x 6
10 x 8
10 x 10
12 x 6
12 x 8
12 x 10
12 x 12
14 x 6
14 x 8
14 x 10
14 x 12
14 x 14
16 x 6
16 x 8
16 x 10
16 x 12
16 x 14
16 x 16
18 x 10
18 x 12
18 x 14
18 x 16
18 x 18
20 x 20
22 x 22
24 x 6
24 x 8
24 x 10
24 x 12
24 x 18
24 x 24
195
195
267
390
340
449
570
390
570
644
820
449
644
749
963
1049
507
749
644
1049
1173
1220
963
1173
1387
1530
1664
2119
2488
785
1049
1387
1530
2224
2816
222
222
305
446
389
512
651
446
651
736
930
512
736
856
1101
1180
579
856
930
1180
1380
1380
1104
1340
1564
1755
2080
2520
2877
893
1101
1564
1755
2572
3249
Size
NC 25
NC 30
6x6
8x6
8x8
10 x 6
10 x 8
10 x 10
12 x 6
12 x 8
12 x 10
12 x 12
168
225
332
295
380
480
332
480
552
702
190
285
380
332
437
555
380
55
629
800
Size
NC 25
NC 30
24 x 4
24 x 6
24 x 8
24 x 10
24 x 12
24 x 18
24 x 24
507
785
1049
1387
1530
2224
2816
579
893
1101
1564
1755
2572
3249
80/C/A/B12
/2" Egg Crate Return
Surface Mount
No Damper
1
CFM
80D/C/A/B12
/2" Egg Crate Face Return
Surface Mount
c/w Damper
1
CFM
80/TB/B12
/2" Egg Crate Face Return
T-Bar Lay-In Models
No Damper
1
14
STG DOOR GRILLES:
CFM
Size
NC 25
NC 30
12 x 6
12 x 8
12 x 12
14 x 10
14 x 14
16 x 8
16 x 12
18 x 10
18 x 12
18 x 18
20 x 12
20 x 16
20 x 20
24 x 12
24 x 16
24 x 18
24 x 24
125
145
220
220
250
185
250
250
260
315
270
315
355
300
355
370
440
165
180
260
260
390
225
390
310
320
380
330
380
430
375
430
450
535
STG
Steel Transfer/Door Grilles
w/ Border on Both Sides
Performance Notes:
AIR LOUVERS - Fire-Rated Transfer / Door Grilles
•Cold rolled steel.
•Mitred and welded corners.
•Screw fastened to door.
•45% free area.
•For use in doors with 1 1/2 hour rating.
•For use in 1 3/4" doors.
•Mineral bronze baked on powder coat.
Size
12 x 12
18 x 12
18 x 14
18 x 18
24 x 18
24 x 24
MODEL 1900-A
Fusible Link Activated,
Warnock Hersey Label
Fire-Rated Transfer/
Door Grilles
MODEL 80 - Egg Crate Grilles
Size
NC 25
CFM
NC 30
NC 35
24 x 6
24 x 8
24 x 12
24 x 18
24 x 24
48 x 24
670
1040
1550
2250
2350
4700
760
1190
1740
2560
2790
5580
860
1360
1990
2950
3200
6400
Performance Notes:
80 Core/B12
Egg Crate Returns (Core Only)
T-Bar Lay-In Models
Aluminum Grid 0º Deflection
1
/2" x 1/2" x 1/2" (13)
15
PD - Plug-in Diffusers
PD 75 (3/4" Air Slot)
PD
Plug-in Diffusers for Paired
T-Bar Applications
NC 30
CFM
Nominal
Length
Inlet
NC 25
NC30
Throw
VT = 50
48
6
100
120
13
60
7
125
155
15
• Finish: Air pattern control
blades: B17 Black Finish
)
PD 100 (1" Air Slot)
2
(10
4” th
g
gth en
en l L
l L ina
a
in om
om N
NC 30
Nominal
Length
48
60
CFM
• Diffuser shell: Mill Finish
N
Throw
VT = 50
Inlet
NC 25
NC30
7
116
140
13
8
140
163
15
16
LTA - Light Troffer Diffusers
Cross-Over is Adjustable to Suit Various Light Fixture Widths
CFM
NC30
Throw
Size
W
NC25 NC30 NC35
VT = 50
S.P.
LTA 14 / LP
8"- 13"
128150180 13.15
LTA 24 / LP
13"- 24"
128150180
13.15
Performance Notes:
1. Throw shown in feet, based on horizontal projection and 20°F cooling differential.
2. T.P. is shown in inches of water.
LTA/LP/KD
Light Troffer Diffuser Saddle Type Supply Diffuser
• Double Side Straddle Type Supply
Swing Side Shell to Upright
Position and Secure with
• Supplied Knocked Down for
Drive Screws
Field Assembly by Installer
• c / w 6 " O v a l S i d e I n l e t
(3" x 79/16")
• Cross-Over is Field Adjustable
Center
Cross-Over
Diffuser
Side
Shell
• Width 8" - 14" / 14" - 24"
Hook In
Nose Detail
Field Assembly of
Cross-Over to Shell
LTA - Light Troffer Diffusers
CFM
NC 30
Throw
Size
NC 25
NC 30
NC 35
VT = 50
S.P.
10-4
85
97
112
9.185
Performance Notes:
2. T.P. is shown in inches of water.
LTA 10-4
Light Troffer Diffuser Single Sided Supply Diffuser
17
SPV8000 / SDV5000 - Single Duct Terminal Units
SPV8000 Air Volume Ranges c/w CP101 Controller
Stock
Unit
Calibration
Size
L/s Min.
L/s Max.
CFM Min.
CFM Max.
CFM
4
25-105
46-106
52-225
97-225
0 / 200
5
32-165
61-165
67-350
130-350
0 / 250
6
39-212
75-212
82-450
158-450
0 / 300
7
46-307
108-307
97-650
229-650
0 / 450
8
71-378
142-378
150-800
300-800
0 / 600
9
99-496
189-496
210-1050
400-1050
0 / 800
10
127-637
241-637
270-1350
510-1350
0 / 950
12
283-1510
510-1510
600-3200
1080-3200
0 / 2200
SPV 8000
Single Duct Terminal Unit
c/w pneumatic Controls
• Pneumatic control c/w pneumatic
actuator
• SP100 multi-point sensor &
gauge taps
• Dual density internal insulation
• Minimal pressure drop and low noise generation
• AHRI certified
SPV8000 Air Volume Ranges c/w CP101 Controller
Unit
Size
L/s Min.
L/s Max.
CFM Min.
CFM Max.
4 24106
50 225
5 33165
70 350
6 38212
80 450
7 52307 110 650
8 76378 160 800
SPV 8000
Single Duct Terminal Unit
c/w pneumatic Controls
• Can be used for VAV or CV
application
9 94 496
2001050
10127637
270 1350
• SP100 multi-point sensor &
gauge taps
12165991
350 2100
• Dual density internal insulation
14 2071416
440 3000
16 2681888
570 4000
• Minimal pressure drop and low noise generation
• AHRI certified
LGB - By-Pass Boxes
EHC - Heating / Cooling with Auto Changeover
Unit
Size
L/s Min.
L/s Max.
CFM Min.
CFM Max.
6 47189 100 400
8 189330
400 700
10236519
500 1100
12378755
800 1600
14 519 991
11002100
LGB
By-Pass Box
• Low pressure gate by-pass
terminal
• Features sliding by-pass damper
for field adjustment
• Available with EHC- Heat/Cool
with automatic changeover control
package
• Optional EHC-1 - Heat/Cool
auto change over with reheat
18
ATT-3 - Attenuator
Unit
Size
B (Width)
C (Height)
4, 5, 6
12
8
7, 8
12 10
9, 10 14121/2
12 1615
14
20171/2
16
2418
ATT-3
3 Foot Attenuator Section for
SDV & SPV Terminal Units
C
B
End View
36" (914)Sta
ndard
Side View
Heating Coils - 2 Row
Unit Size
B
C
4, 5, 6
12 (305)
8 (203)
7, 8
12 (305)
10 (254)
9, 10
14 (356)
121/2 (318)
12
16 (406)
15 (381)
AccessDoors
Acces
sDoors
3/4 (102
x 171)
4"x 64"
x 171)
x 6 3/4 (102
Top &Top
Bot
t
om
& Bottom
Coil Section
RDV 5000 - SP 300 Multipoint Sensor & Guage Taps
Unit Size
CFM
L/S
6
66 - 450
31 - 212
8
132 - 800
62 - 378
10
221 - 1350
104 - 637
12
304 - 2100
143 - 991
14
439 - 3000
207 - 1416
16
568 - 4000
268 - 1888
Coil Section c/w CAD
(Coil Access Door)
19
EHC1 (2503) Electric Cooling/ Heating Changeover with 1 Stage Reheat
Connection Descriptions:
Connection
Description
24~ HOT
COM
24 VAC Hot (power)
24 VAC Common
Thermistor Input – Duct Probe
nd
(2 wire of thermistor is connected to COM)
Damper CLOSE Output – Switched HOT
Damper OPEN Output – Switched HOT
24 VAC Reheat Output.
(Switched HOT or Switched COM – depending on jumper position)
Analog heat output
Analog cool output
Contact closure input (night setback)
Short to COM to put T-Stat into night setback
THERM
CLO
OPN
REHEAT
0-10 HEAT
0-10 COOL
CONTACT
20
CP101 - Pneumatic Controller
• Provides accurate control over a duct velocity range of 0-3000 fpm.
• Operates at low system pressures. As effective at 0.02" w.g. as at 6" w.g.
• Completely pressure independent.
• Adjustable minimum and maximum air volume settings easily field adjusted if required.
CP-101
• Reset span remains constant regardless of maximum and minimum air volume Replacement Controller for the
SPV Terminal Unit
adjustments.
• Provides constant 5 psi reset span as per standard factory calibration.
• Adjustable start point for reset span to accommodate auxiliaries such as reheat coils.
• Includes option to expand reset span to 10 psi to accommodate most
thermostats.
•Adjustable to accommodate either direct acting or reverse acting thermostats.
Also settings for either normally open or normally closed damper operation without
added control components.
• Standard mounting face down. All adjustments are directly accessible through a ceiling
opening.
CP101 - Pneumatic Controller
CP100
• Provides pressure independent control of airflow through pneumatic controlled
boxes.
• Available for use with direct acting thermostat and normally open damper.
CP-100
Replacement Controller for the
SPV Terminal Unit
21
Flex Duct
Applications and Engineering Data
Nominal Inside Diameter (inches)
Length (feet)
Inside Bend Radius (inches)
Operating Pressure (inches water column)
3
4
5
6
7
8
9
10
12
14
25
25
25
25
25
25
25
25
25
25
3
4
5
6
7
8
9
10
12
14
Positive = 10 inches
Maximum Leakage
(cubic ft./min./linear ft./in. diameter)
At 10 inch water column
0.015
Internal Operating Temperature Range (˚F)
Minimum = 0
Velocity (feet per minute)
5000
Surface Burning Characteristics
Oxygen Index Ratings
Negative = 1 inch
S-LD
Non-Insulated Flexible
Connector for Low to
Medium Pressure Systems
Maximum = 250
Max. Flame Spread = 25
Max. Smoke Developed = 50
Reinforced Foil Laminate= 25.35
Coated Wire= 27.74
• Reduced total installed costfast, economical installation
• Maintenance free under normal
conditions- highly resistant to
rust, corrosion or fungus
• Assists absorbing system
vibration transmitted through
ductwork
Length (feet)
3
4
5
6
7
8
9
10
12
14
25
25
25
25
25
25
25
25
25
25
3
4
5
6
7
8
9
10
12
14
Positive = 10 inches
Negative = 1 inch
Maximum Leakage
0.015
Minimum = 10 inches
5000
Woven and Coated Glass Cloth Fabric = 35.60
Maximum = 250
SLP-10
Non-Insulated Flexible
Connector for Low to
• Extremely strong woven fiberglass fabric with flame retardant
coating
• Fabric is permanently bonded
to a corrosion resistant coated
spring steel wire helix
• For all pressure heating and
cooling systems
22
Flex Duct
Length (feet)
2
3
4
5
6
7
8
9
10
12
14
16
18
20
25
25
25
25
25
25
25
25
25
25
25
15
15
15
2
3
4
5
6
7
8
9
10
12
14
16
18
20
Maximum Leakage
Positive = 16 inches (2-10 in. ID) 10 inches (12-20 in. ID) Negative = 1 inch
Minimum = 0 inches
6000
Woven and Coated Glass Cloth Fabric = 35.60
0.015
S-TL
Non-Insulated Air Duct for
High Pressure Systems
Maximum = 250
• Reduced total installed cost fast, economical installation
• Suitable for all bathroom
and dryer venting applications
• Assists absorbing system
vibration transmitted through
ductwork
• Easily shaped to fit oval inlets
Length (feet)
4
5
6
7
8
9
10
12
14
16
18
20
25
25
25
25
25
25
25
25
25
25
25
25
2
3
4
5
6
7
8
9
10
12
14
20
Operating Pressure
(inches water column)
Positive = 10 inches (4-12 in.ID) 6 inches (14-16 in.ID) 4 inches (18-20in.ID)
Negative = 1 inch (4-12 in.ID)
1/2 inches (14-20in.ID)
Operating Temperature Range (˚F)
Minimum = -20
5000
R-value
4.2, 6.0, 8.0
CPE Cpre = 3.13 Metalized Jacket = 45.7
Vapor Transmission Rating (U.S. Perm)
0.05
Maximum = 250
MK-E
Insulated Flexible Air Duct
for Low and
• Offers exceptional sound control
• Acoustically rated chlorinated
polyethylene (CPE) core allows
sound energy transmission
through the core and insulation,
and into the plenum space
• Highly efficient, self-extinguishing duct
23
Diffuser/Flex Accessories
Stainless Steel
Gear Clamps
3"
5"
4"
6"
8"
9"
10”
12"
Plastic Straps
and Tension Tools
up to 10” dia.
L300
14”
24
MODEL GB - Belt Drive Centrifugal Roof Exhausters
Model
A
B
C
Roof
Opening
Damper Min/Max Sones
Size
Sones @ 0 in.
0
.25
Performance in inches WG
.5 .75 1 1.25 1.5 1.75 2.0
GB-071 19 24 3/8 23 3/8 141/2 x 141/2
600
1710
1.2
11.1
131
372
334
292
245
198
GB-081 19 24 /8 23 /8 14 /2 x 14 /2
600
1710
2.2
12.5
301
856
175
784
710
629
480
GB-091 19 24 3/8 23 3/8 141/2 x 141/2
600
1710
2.7
13.4
445
271
1295 1179 1061
934
785
700
1800
3.7
13.2
3
3
1
1
12 x 12
GB-101 19 24 3/8 23 3/8 141/2 x 141/2
593
68
455
1525 1418 1320 1208 1064
MODEL GB
Greenheck Roof Exhausters
793
721
GB-121 19 24 3/8 23 3/8 141/2 x 141/2
595
1725
3.3
17.4
GB-131 19 28 /8 23 /8 14 /2 x 14 /2
595
1685
4.5
16.9
2391 2278 2157 2020 1857 1654
GB-141 22 28 3/8 23 3/8 181/2 x 181/2
525
1705
4.4
20
3163 3020 2883 2739 2574 2370
GB-161 22 28 3/8 23 3/8 181/2 x 181/2
478
1375
4.7
21
4062 3815 3571 3304 3007 2609 2073
GB-180 30 35 1/2
28
201/2 x 201/2
495
1460
4.3
26
5677 5514 5335 5155 4938 4698 4426 4123 3765
GB-200 30 35 1/2
28
201/2 x 201/2
440
1200
6.5
24
6640 6336 5968 5650 5274 4828 4177 3077
300
985
6.6
23
7484 7212 6898 6568 6106 5547 4883
GB-240 34 423/4 31 1/2 261/2 x 261/2
425
910
5.9
24
8355 7916 7467 6932 6240 5388 3707
GB-300 40
300
890
9.3
28
14416 13335 13897 12716 12072 11379 10536 9568 7963
Model GB belt drive exhausters
are designed for roof mounted
applications exhausting relatively
clean air. They feature a spun
aluminum housing and nonoverloading backward inclined
wheel. Motors are located out
of the airstream with positive
cooling by ambient air. Model
GB fans are licensed to bear the
AMCA Certified Ratings Seals for
air and sound performance and
are U.L. Listed and CSA certified.
Units complete with birdscreen,
Disconnect switch.
255
700
5.2
28
6159
Dampers Available
16908 16185 15408 14564 13624 12640 11538 10184
215
685
4.8
30
18321 17560 16711 15773 14710 13534 12119
3
3
1
1
16 x 16
18 x 18
GB-200 34 423/4 31 1/2 261/2 x 261/2
24 x 24
50
36
321/2 x 321/2 30 x 30
GB-330 46 58 3/4 38 1/2 381/2 x 381/2
36 x 36
GB-360 46 58 3/4 38 1/2 381/2 x 381/2
2093 1984 1871 1743 1600 1426
844
974
655
709
1412 1030
1924 1150
2434
2507
3905 3422
4859 3976
5750
• 10 x 10 Damper
• 12 x 12 Damper
• 16 x 16 Damper
• 18 x 18 Damper
Greenheck Fan Corporation certifies that the GB models
shown herein are licensed to bear the AMCA Seal. The ratings
shown are based on tests made in accordance with AMCA
Standard 210 and AMCA Standard 300 and comply with the
requirements of the AMCA Certified Ratings program.
The sound ratings shown were obtained in accordance with
AMCA Standard 300 fig. 2. Loudness values in sones at a
distance of 5 feet were calculated in accordance with AMCA
Standard 301. The AMCA Certified Ratings Sound Seal
applies to sone ratings only.
• 24 x 24 Damper
B
GPI's Available
• 17
• 19
C*
• 22
• 30
• 34
• 40
D
2 1/2"
A
• 46
25
MODEL G - Direct Drive Centrifugal Roof Exhausters
Dimensions (inches)
WD-100Roof
Model
A
B
C*
Damper
Opening
G-070, 075
17
193/8121/88 101/2
G-080, 085, 090, 095
17
213/4
145/8
*May vary depending on motor size. Curbs Available - GPI 17.
8121/2
B
Model G Greenheck
Roof Exhausters
Greenheck Fan Corporation certifies that the G models
shown herein are licensed to bear the AMCA Seal. The
ratings shown are based on tests made in accordance with
AMCA Standard 210 and AMCA Standard 300 and comply
with the requirements of the AMCA Certified Ratings
program.
C
D
21/2"
A
Performance Data
Static Pressure / Capacity
Model HP RPM
TS 0.000 0.1000.125 0.250 0.3750.500 0.625
Sone BHP Sone BHP SoneBHP Sone BHP Sone BHP Sone BHP Sone BHP
G-070-E
1/100
1050 2234254196
179
G-070
G-070-G
1/60
1300
G-070-D
1/30
1550
G-075-E
1/80
1050
G-075
G-075-G
1/50
1300
G-075-D
1/25
1550
G-080-E
1/40
1050
G-080
G-080-G
1/30
1300
G-080-D
1/20
1550
G-085-E
1/40
1050
G-085
G-085-G
1/30
1300
G-085-D
1/20
1550
G-090-E
1/40
1050
G-090
G-090-G
1/25
1300
G-090-D
1/15
1550
G-095-E
1/30
1050
G-095
G-095-G
1/12
1300
G-095-D
1/8
1550
7.4.050 7.4.055 7.4.057
3.6.012 3.7.016 3.7.017
3.8.019
5.4.023 5.3.028 5.3.029
5.2.035 4.9.036
7.5.039 7.4.044 7.4.046
7.4.053 7.5.060 7.6.062 7.7.056
3.8.014 3.7.019 3.7.020
3.6.024
5.4.027 5.4.033 5.4.034
5.5.041 5.5.045
7.5.046 7.4.053 7.4.055
7.4.063 7.4.070 7.4.076 7.4.074
4.9.029 4.6.034 4.6.035
4.5.037
3701888801780640493184
7.3.038 7.4.042 7.4.044
2990717605569389
5.4.032 5.4.033
4413768714700633558472338
5.4.022 5.4.026 5.4.027
3701644580564478373
3.5.017
2990520441420292
3.8.012 3.6.015 3.6.016
4413588541529464393308169
• Speed controls
5.3.035 4.5.033
3701494436421340233
6.1.033 5.5.034 5.4.035
2990399326307179
3.6.020
4413495450439379314238
4.4.019 3.8.020 3.7.021
3701415361348272175
• Backdraft damper. Model
WD-100, gravity or motorized
3.3.010 2.8.011 2.7.011
2990335268249134
Accessories
• Roof curbs
4.7.026 4.2.025
3297438389377310214
5.6.022 5.3.024 5.2.024
2765367309294195
2.7.015
2234396222200
4.1.013 3.4.015 3.2.015
3297374337327274190
2.5.007 1.7.008 1.5.008
2765314268257171
Model G direct drive exhausters
are designed for roof mounted
applications exhausting relatively
clean and cool air. They feature
a spun aluminum housing, a non
overloading backward inclined
wheel, and positive motor cooling.
Model G fans are licensed to bear
the AMCA Certified Ratings Seals
for air and sound performance and
are U.L. Listed and CSA certified.
7.4.058 6.9.061 6.8.063
44131059986969
9.6.095 9.4.101 9.4.103
6.5.069 6.4.071 6.4.049
863
745
623
474
9.1.111 8.2.117 8.0.120 8.0.114
Performance Notes:
1. Performance shown is for Model G without ducts.
26
MODEL CUBE - Centrifugal Roof Exhausters Belt Drive, Upblast
Condensed Performance Ranges & Dimensional Data
Model
A
B
C
D
Roof
Opening
Size
Sones @ 0 in.
0
.25
.5
.75
1
2
732
625
481
1549
1459
1350
1234
1106
1923
1816
1710
1571
2128
2001
1864
1684
3125
3005
2865
2711
2539
2098
1669
3996
3806
3584
3340
3078
7.1
28
2380
1861
5648
5443
5254
5082
4921
500
1210
6.2
25
2812
1822
6806
6451
6108
5748
5350
450
955
7.3
25
3585
2624
7607
7202
6799
6347
5844
CUBE-240 34 4225/32 337/8 251/2 261/2 x 261/2
410
930
6.4
24
3717
2471
6375
CUBE-300 40
7985
4227
6953
6.9
32
8431
5777
7536
355
905
14727
14266
13788
13223
12614
CUBE-101 19
247/8 241/4 173/8 141/2 x 141/2
860
1820
4.6
14.3
CUBE-121 19
247/8 281/4 173/8 141/2 x 141/2 12 x 12
685
1725
4.4
15.6
CUBE-131 19
24 /8 28 /4 17 /8 14 /2 x 14 /2
650
1645
6.2
17.9
CUBE-141 22 29 /4 24 /4 19 /8 18 /2 x 18 /2
590
1725
5.0
26
1069
730
1390
8.1
22
630
1495
7
1
3
3
3
3
1
1
1
1
16 x 16
CUBE-161 22 293/4 243/4 193/8 181/2 x 181/2
CUBE-180 30 353/8 285/8
21 201/2 x 201/2
18 x 18
CUBE-200 30 35 /8 28 /8
3
5
21 20 /2 x 20 /2
1
1
CUBE-220 34 4225/32 337/8 251/2 261/2 x 261/2
24 x 24
50
36
28 32 /2 x 32 /2 30 x 30
1
1
809
2037
892
2256
MODEL CUBE
Greenheck Roof
Exhausters
3564
9178
High Pressure Condensed Performance Ranges & Dimensional Data
Model
A
B
C
D
Roof Damper Min/Max Sones
Opening Size Sones @ 0 in.
0
6.1
19.8
CUBE-161HP 22 287/8 243/4 193/8 181/2 x 181/2
825
1690
7.0
21
CUBE-180HP 30 353/8 288/8 21 201/2 x 201/2
795
1685
8.3
27
740
1600
8.1
29
1069
650
1240
635
1230
16 x 16
18 x 18
CUBE-200HP 30 35 /8 28 /8 21 20 /2 x 20 /2
3
8
1
1
CUBE-220HP 34 4225/32 337/8 251/2 261/2 x 261/2
24x 24
CUBE-240HP 34 4225/32 337/8 251/2 261/2 x 261/2
Greenheck Fan Corporation certifies that the CUBE and
CUBE-HP models shown herein are licensed to bear the
AMCA Seal. The ratings shown are based on tests made in
accordance with AMCA Standard 210 and AMCA Standard
300 and comply with the requirements of the AMCA
Certified Ratings program.
2
331
895
2110
CUBE-141HP 22 287/8 243/4 193/8 181/2 x 181/2
.25
.5
.75
1
1549
1459
1350
1234
1106
1923
1816
1710
1571
2128
2001
1864
1684
3125
3005
2865
2711
2539
8.6
26
2098
1669
3996
3806
3584
3340
3078
8.1
26
2380
1861
5648
5443
5254
5082
4921
809
2037
• For the unit listed, the motor
and drive are not included
3564
D
21/2"
Stock Note (Model CUBE-101-4
and CUBE-141-5):
• The units listed are supplied
with 115/60/1 motors installed
Stock Note (Model CUBE-180-LMD
and CUBE-200):
B
A
UL 762 listed for restaurant
applications and operation up to
300°F (UL 762 includes UL 705
listing)
• Units are supplied preset for
maximum RPM and are field
adjustable
892
2256
Model CUBE is designed for
restaurant/commercial kitchen
ventilation by exhausting hot and
contaminated air up and away from
the building
C
27
MODEL CUE - Direct Drive Roof Exhausters
Condensed Performance Ranges & Dimensional Data
C
D
Roof
Opening
Size
Sones @ 0 in.
Model
A
B
CUE-085
19
21
133/8 111/2 121/2 x 121/2
CUE-095
19
21
151/4 137/16 121/2 x 121/2
10 x 10
Greenheck Fan Corporation certifies that the CUBE and
CUBE-HP models shown herein are licensed to bear the
AMCA Seal. The ratings shown are based on tests made in
accordance with AMCA Standard 210 and AMCA Standard
300 and comply with the requirements of the AMCA
Certified Ratings program.
0
.125 .25
.5
.75
1050
1550
4.0
7.5
389
305
182
574
520
461
1050
1550
5.34
9.6
711
570
381
1049
964
816
1.5
312
616
B
MODEL CUE
Greenheck Roof
Exhausters
"
D
1 3/4 in.
A
C*
Model CUE Centrifugal Roof
Exhaust fans are direct drive. These
fans are specifically designed
for roof mounted applications.
Exhaust air is discharged directly
upward, away from the roof surface.
Fan wheels are centrifugal,
backward inclined and constructed
of aluminum.
28
MODEL BSQ- Centrifugal Inline Fans Belt Drive
Dimensions (inches)
Model ABCD
BSQ80 21 15117/89
BSQ120
21
19
157/8
9
BSQ140 22 23197/89
• Hanging Vibration Isolation Kits - HVI & HSI
• Insulation Kits
A
E
B sq.
E
C sq.B sq.
C sq.
D*
Greenheck Fan Corporation certifies that the SQ and BSQ
models shown herein are licensed to bear the AMCA Seal.
The ratings shown are based on tests made in accordance
with and procedures performed in accordance with AMCA
Publication 211 and AMCA Publication 311 and comply
with the requirements of the AMCA Certified Ratings
program.
MODEL BSQ
Greenheck Centrifugal
Inline Fans
Models SQ and BSQ inline duct
fans are designed for intake,
exhaust, return or makeup air
systems that require high efficiency
mounting versatility, low sound
levels and ease of service. The
square, compact housing design
permits mounting in any position,
whether horizontal, vertical or at
any angle. Two removable panels
provide access for service. Models
SQ and BSQ are licensed to bear
the AMCA Certified Ratings Seals
for Sound and Air Performance.
All stock SQ and BSQ sizes are
UL listed.
Construction Features
• Galvanized steel housing,
aluminum wheel
• Tw o r e m o v a b l e
panels
Performance Data
service
Performance in Inches WG
• F o r m e d c o l l a r s f o r d u c t
RPM.125 .25 .375.5.625
.75 11.25 connection at inlet and outlet
Model HP
BSQ-80-4
/4
1
1050
371
297
1430
544499
447
386
322
1835 720 687 651614571525425
BSQ-120-4 BSQ-140
1000 1025913 782
/4 1210 1283 11921098 992 860
1
1370 1475 13951315123011351025
800
1362
1185
859
1075 1925 1807167915351306
1 4
/
/3 1080 2132 2028191517951615 1442
1
1 2
/
1355 2474 238922952195209219761630
3
/4 1550 2852 2781270226192531244222451954
1 1710 3160 3096302929542879280026372453
11/21960 3640 3584352834693403333832013059
2 2135 3974 3871382037633763380335833454
• Flexible motor leads and
combination junction box and
disconnect switch (standard)
• BSQ motors, bearings and
drives are mounted out of the
airstream and are cooled by
ambient air
• c / w i n s u l a t e d
(optional)
• Disconnect switch
housing
29
MODEL CW - Centrifugal Sidewall Exhausters Direct Drive
Dimensional Data
Model
A
B
C
Wall
Opening
Damper Size
Damper
Frame Size Mtg. Bolt Circle
CW 085
21
13 3/8
17 7/8
10 1/2 x 10 1/2
10 x 10
12 x 12
15
CW 095
23
15 1/4
17 7/8
10 1/2 x 10 1/2
10 x 10
12 x 12
15
MODEL CW
Sidewall Exhausters
All dimensions in inches.
2 inches minimum, 5 inches when motorized damper is required.
The CW models are direct drive
centrifugal sidewall exhausters
designed to meet the stringent
requirements of today’s engineers,
specifiers, designers, contractors
and customers. These units feature
“engineered in” performance, efficiency, quietness, rugged cosntruction and lasting quality.
Damper Size
Wall Opening
Damper Frame Size
C
Mounting Hole
Bolt Circle
B**
A
Greenheck Fan Corporation certifies that the CWand CWB
models shown herein are licensed to bear the AMCA Seal.
The ratings shown are based on tests made in accordance
with AMCA Standard 210 and AMCA Standard 300 and
comply with the requirements of the AMCA Certified Ratings
program.
Stock Note:
• The units listed are supplied with
115/60/1 motors installed
61/2”
• All stocked CW units can be
used with 5W speed control
for variable performance
requirement
*
Performance Data
Static Pressure / Capacity
0.0000.1000.1250.2500.3750.5000.625
Model
HP
RPM
TS
Sone BHPSoneBHPSoneBHPSoneBHPSoneBHPSoneBHPSoneBHP Sone
CW-090-E
1/401050
2990549470451306
4.10.193.9.0233.9.0244.2.027
CW-090
CW-090-G
1/251300
3701680616600516391
5.5.0355.4.0415.4.0425.4.0485.6.052
CW-090-D
1/151550
4413811757744677603501347
7.8.0607.6.0667.6.0687.5.0767.4.0827.4.0877.8.084
CW-095-E
1/301050
2990711603570381
5.3.0324.5.0364.5.0374.5.037
CW-095
CW-095-G
1/121300
3701880797774641484199
7.5.0616.8.0666.7.0676.4.0726.4.0716.8.054
CW-095-D
1/81550
4413
1049983964861747616443
9.6.109.3.119.3.118.5.128.3.128.1.127.8.11
Performance Notes: Performance shown is for Model CW without ducts.
30
CSP A110-A780 - Greenheck Ceiling Exhaust Fans
Dimensional Data
Model
A
A190 B
C
131/4 105/8 101/2
A250, A290, A390
A410, A510
A710, A780
14
18
11 /8 11 /4 143/8 141/2
18 143/8 141/2
7
1
Grille
Size
D
E
8
6
143/4 x 123/4
16
8
8
8
8
14 /4 x 12 /4
193/8 x 163/8
23
36
10
8
193/8 x 163/8
36
3
**
Wt.
3
B
3/4"
A
1"
**
Air Flow
E
G*
D
11/2"
For complete dimensional information, see submittal drawings.
F
*Inlet Dimensions
**Optional Discharge Position
Performance
Data
Model
RPM
Amps
Watts
(Input)
CSP-A110
950
0.62
51
CSP-A125
1100
0.63
55
CSP-A190
1400
1.10
100
CSP-A200
CSP-A250
900
1000
0.43
0.79
48
83
CSP-A290
1050
0.71
80
CSP-A390
1350
1.33
144
CSP-A410
1000
1.87
139
CSP-A510
1070
3.11
217
CSP-A700
1100
3.20
350
CSP-A710
1080
4.40
325
CSP-A780
1600
3.77
405
CFM / Static Pressure in inches of W.G.
0.000
0.100
0.125
0.250
0.375
0.500
0.625
0.750
125
110
102
77
—
—
—
—
Sones
1.1
1.1
1.3
1.3
—
—
—
—
CFM
138
124
113
91
—
—
—
Sones
1.4
1.3
1.4
1.7
—
—
—
—
CFM
CFM
215
202
198
180
159
—
—
Sones
2.3
2.0
2.2
2.7
2.9
—
—
—
CFM
254
230
225
203
117
145
109
70
Sones
0.8
0.7
0.8
1.3
1.5
1.9
2.2
2.1
CFM
266
246
241
221
205
187
165
132
Sones
1.3
1.5
1.5
2.3
3.3
3.4
3.2
3.0
CFM
318
299
292
265
248
229
201
144
Sones
1.6
1.7
1.8
2.6
3.3
4.0
3.7
3.4
CFM
412
400
397
382
363
339
324
309
Sones
2.8
2.7
2.8
3.2
3.7
4.7
5.5
6.5
CFM
447
411
403
364
316
214
—
—
Sones
2.2
2.1
2.2
2.5
2.7
3.1
—
—
CFM
545
514
506
464
405
324
—
—
Sones
3.1
2.9
2.8
2.8
2.7
3.1
—
—
CFM
766
739
739
726
702
635
Sones
2.6
2.4
2.4
2.5
2.6
3.0
CFM
737
698
688
635
566
474
334
Sones
3.2
3.3
3.2
3.3
2.7
2.5
2.7
—
CFM
813
783
776
741
707
671
637
603
—
31
CSP A900-A1750 - Greenheck Cabinet Exhaust Fans
Performance Data
Model
RPM
Amps
WattsCFM / Static Pressure in inches of W.G.
(Input)
0.0000.1000.1250.2500.3750.5000.6250.750
CSP-A900
9504.87328CFM908852840782714631 — —
Sones
3.73.83.84.04.04.1 — —
CSP-A1050
10956.65 455 CFM118211010931013922 832 743 —
Sones
6.36.15.95.86.06.05.5 —
CSP-A1410
1450 7.80 822 CFM 15841543153314831439139513451293
Sones
6.36.26.26.36.56.87.27.6
CSP-A1550
1610 8.32 830 CFM 16721617160415421484142713671306
Sones
8.68.28.58.48.58.58.58.5
Performance Notes:
Performance shown is for Model CSP inline installation type B: free inlet, ducted outlet. Performance ratings include the effects of an inlet duct and backdraft
damper in the airstream. Speed (RPM) shown is nomin al. Performance is based on actual speed of test.
The sound ratings shown are loudness values in fan sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA Standard 301. Values are for installation
type B: free inlet sone levels. The AMCA Certified Ratings Sound Seal applies to sone ratings only.
11/2"
Dimensional Data
Model
A900,A1050233/4143/8141/2183/48225/8131/4
3/4"
A
**
ABCDEFG
Wt.
5 9
B
**
1"
Air Flo
w
A1410, A1550
E
G*
C
D
F*
*Inlet Dimensions **Optional Discharge Position
SP B90-B200 - Greenheck Ceiling Exhaust Fans
Model
SP-B110
Watts
RPM Amps (Input)
950
1.14
SP-B150 1050 1.70
80
129
0.000
0.100
0.125
0.250
0.375
0.500
0.625
0.750
CFM
133
114
110
98
95
95
92
85
Sones
2.0
2.1
2.2
2.3
2.7
2.7
3.7
4.4
CFM
166
154
153
152
150
150
148
138
Sones
3.0
3.2
3.3
3.6
4.3
4.5
4.9
5.3
A
F
C
B
E
D
Dimensional Data
Grille
Model A
B
C
D
E
F
Size
B90, B110, 137/8 111/2 81/8
B150, B200
6
11/4
11/2
143/4 x123/4
Wt.
10
32
SP A110-A1550 - Greenheck Ceiling Exhaust Fans
Performance
Data
Model
RPM
SP-A110
SP-A125
SP-A190
950
1100
1400
Amps
Watts
(Input)
0.58
0.62
53
1.30
113
900
0.43
48
SP-A250
1000
0.77
83
SP-A390
SP-A410
SP-A510
SP-A710
SP-A780
1050
1350
1000
1070
1080
1600
SP-A900
SP-A1050
SP-A1410
SP-A1550
950
1095
1450
1610
0.72
81
1.34
135
1.74
121
3.30
224
4.40
285
3.30
348
4.00
285
6.30
420
7.40
786
8.60
818
0.625
0.750
119
110
106
88
—
—
—
—
Sones
1.3
1.2
1.2
1.6
—
—
—
—
CFM
135
123
121
104
—
—
—
—
Sones
1.4
1.7
1.8
1.9
—
—
—
—
CFM
216
197
192
167
133
—
—
—
Sones
3.2
2.8
2.9
3.1
3.4
—
—
—
CFM
247
225
220
196
172
142
105
67
Sones
2.0
2.3
2.4
3.0
3.5
4.1
4.6
4.5
119
CFM
272
251
246
227
210
185
157
Sones
2.9
3.0
3.0
3.4
4.4
4.6
4.9
5.2
CFM
315
293
287
257
231
207
175
124
Sones
3.2
3.3
3.3
3.6
3.9
4.1
4.5
5.5
CFM
410
395
391
368
345
325
307
279
Sones
5.4
5.4
5.4
5.7
6.0
6.3
6.4
6.7
CFM
443
413
405
351
305
109
—
—
Sones
4.1
3.8
3.7
3.7
4.3
3.7
—
—
CFM
557
512
501
439
392
325
—
—
Sones
6.0
5.7
5.6
5.5
5.4
4.7
—
—
CFM
752
714
701
653
588
485
320
—
Sones
7.4
7.2
7.2
7.0
6.8
6.7
6.5
—
CFM
812
782
775
741
704
665
625
581
Sones
10.2
10.2
10.2
9.9
9.5
9.5
9.4
9.4
CFM
995
907
896
941
773
701
—
—
Sones
5.2
5.7
5.8
6.1
6.2
6.2
—
—
CFM
1125
1059
1043
964
885
796
662
—
Sones
7.2
7.0
6.9
6.8
6.6
6.5
6.5
—
CFM
1455
1414
1404
1353
1307
1262
1218
1174
Sones
11.6
11.6
11.7
11.6
11.5
11.6
11.6
11.6
CFM
1607
1568
1558
1506
1449
1407
1369
1323
Sones
12.4
12.1
12.1
12.0
11.9
12.8
14.1
15.9
Dimensional Data
0.100 0.125 0.250 0.375 0.500
CFM
49
SP-A200
SP-A290
0.000
Grille
Size
Model
A
B
C
D
E
A110, A125, A190
A200
131/4
105/8
115/8
6
DIA 137/8
111/2
65/8
8
8
143/4 x 123/4
24
147/8 x 131/4
14
117/8
111/2
8
8
143/4 x 123/4
24
18
143/8
141/2
8
8
193/8 x 163/8
31
A710, A780
18
143/8
141/2
10
8
193/8 x 163/8
34
233/4
143/8
143/4
183/4
8
25 x 163/8
56
B
17
A410, A510
A
* *
Wt.
A250, A290, A390
A900, A1050, A1410, A1550
Greenheck
Ceiling Exhaust Fans
1"
* *
Air Flow
11/2"
D
C
Grille Size
**Optional Discharge Position
Grill
e Size
E
33
34
35
PRESTIGE Series
LX70 LX90 LX110
LX
Very quiet ventilators with painted galvanized steel housing
& white polymeric grille. 4 pole plug in motor with lifetime lubrication.
C & D------
--
-- F
--
E
B
A
MODEL
GRILLE
AxB
HOUSING
CxDxE
DUCT
F
LX70
LX90
LX110
Sones
Power
(watt)
Current
(amps)
RPM
(nominal)
Electrical
Rating
Room
Capacity
LX70
0.3
17.2
0.159
975
120V/60Hz
80 sq.ft.
LX90
0.7
23.7
0.160
1110
120V/60Hz
100 sq.ft.
LX110
1.0
28.2
0.252
1375
120V/60Hz
120 sq.ft.
Airflow
CFM
0.6
Static Pressure (inches of w.g.)
MODEL
0.5
0.4
0.3
0.2
LX70
0.1
LX90
LX110
0
20
40
60
80
100
120
140
160
180
Flow Rate CFM
2100
I
CERTIFIED
8
BRITISH
COLUMBIA STOCK BOOK
XDF
36
DRYER BOOSTER FAN
XLERATOR Series Dryer Booster Fan
XDF200 XDF300
European designed external rotor motor / blower technology
with superior air performance. 120V/60Hz Electrical Rating.
Control systems sold separately (amp sensor or pressure switch).
B
---
A
E
C
D
MODEL
HOUSING
AXBXC
INTAKE
D
DISCHARGE
E
XDF200
XDF300
MODEL
CFM
CURRENT
POWER
RPM
XDF200
200
0.95
109
2550
XDF300
300
1.4
159
2600
Static Pressure (inches of W.G.)
3
2.5
2
1.5
1
0.5
XDF200
XDF300
0
40
80
120
160
200
240
280
320
360
Flow Rate CFM
2100
I
CERTIFIED
2100
I
CERTIFIED
www.price-hvac.com
Worldwide Supplier of Preference for Air Distribution Products
37
MODEL SWB - Centrifugal Utility Fans
Performance
Performance capabilities range from 500 cfm to 25,000 cfm
and up to 5 in. wg of static pressure.
Dimensional Data
Model
SWB-210
A
22
B
C
D
E
F
26 5/8 18 3/4 16 7/8 15 1/2 8 1/4
H
11
Min/Mid
Max/
CFM
OV
500
791
23
28 3/8 21 3/8 16 7/8 15 1/2 9 5/8
13
1
2
3
4
5
1977 1770 1968 2317 2657 3003 3326
2375
3757 3096 3201
729
1020 1372
1650
2007 1775 1943 2262 2567 2868 3147
2850
3467 2867 2968 3169
1000
SWB-216 28 1/4 34 5/8 25 3/4 21 1/8 18 1/2 11 5/8 15 7/8
.5
1078 1475
1250
600
SWB-212
Performance in Inches WG
810
839
2575
2086 1447 1580 1829 2079 2329
4375
3545 2302 2386 2547
All dimensions in inches.
Performance certified is for installation type B: free inlet, ducted outlet. Power ratings (BHP) does not include transmission
losses. Performance ratings do not include the effects of appurtenances (accessories).
C
E
F
MODEL SWB
Utility Fans
The SWB is a belt driven fan and
features a backward inclined centrifugal wheel. This fan is suitable
for ducted exhaust, supply, and
return-air applications. Typical
applications include commercial
kitchens, fume hoods and emergency smoke control. Capacities
range from 500 to 30,000 cfm
and up to 5.0 in. wg.
Stock Note:
• Entire fan is constructed
of steel and is coated with
Permatector
• Steel wheel
• Motor cover
H
B
D
A
O.D.
38
Box Spring Isolators
Solid
Color
Code
Dimensions
"A x B"
inches
1.9
GREY
5.0 x 2.50
1.6
YELLOW
As above
Model
Number
Spring Rate
LBS.
Load @ 1"
Defl. LBS.
Load
LBS.
Defl.
IN.
SSH - 15
15
15
28.7
SSH - 30
30
30
48.7
SSH - 60
60
60
90.0
1.5
RED
As above
SSH - 100
100
100
157.2
1.6
BLUE
As above
SSH - 150
150
150
240.5
1.6
BLACK
As above
SSH - 200
200
200
276.2
1.4
WHITE
As above
SSH - 300
300
300
334.2
1.1
GREEN
As above
Note: Nuts, Bolts, Robs furnished by others.
B
SECTION
PROFILE
A
1/2" MAX. DIA.
ROD OR BOLT
Hanging Vibration Isolators (CK)
Vibration isolator kits are available for suspended installations. Kits include
all hardware necessary to mount one unit, with the exception of 1/4" threaded
rod supplied by others. Fan mounting brackets include pre-punched holes
for ease of installation.
Unit Sizes
B110-200 A110-190 A250-390 A410-780 A900-1500 A1750
A
B
41/2
115/8
51/2
145/8
63/4
151/2
91/4 195/8 91/4
253/8
91/4 363/4
SSH
Box Spring Isolator
for 1 Inch Deflection
• Heavy duty 14 GA galv hanger
box
• Color coded springs for identification
• EPDM / Neoprene cup to prevent
metal to metal contact
• 30 degree swing
39
Motor and Fan Controllers
Greenheck Fan Speed Control
Speed controls are available in two models for use with shaded pole and
open permanent split capacitor motors in 115 volt single phase only.
Model 5W - For applications up to 5.0 amps. Requires 2 x 4 handy
box by others.
Model 10W - For applications up to 10.0 amps. Requires 4 x 4 handy
box by others.
Fan Speed Control
Aube T1033 Programmable Switch
This easy-to-install switch handles motors, all types of lighting, and
offers the flexibility of 7 programs per week.
T1033 - Programmable Switch
Greenheck Model GTD Time Delay Switch
The Model GTD Time Delay Switch is available for keeping a fan or light
operating for an extended period of time after the initiating switch has
been turned off. The GTD assembly consists of a single pole, single
throw switch, a timer and a cover plate.
Time Delay Switch
40
E3Point
Make your operation run more
intelligently to protect people,
property and your bottom line
Coming in 2011
41
E3Point
Point Toxic and Combustible
Gas Monitor
Flexible Operation
• Comes in standalone, standalone with remote
(dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet,
Modbus or LonWorks*
• Connects to wired or wireless system
(via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges
E3Point goes beyond protection to offer your
building greater performance and productivity.
Plug-N-Play
Sensor Cartridge
Main Unit
Cost Effective
• Saves energy through Demand Control
Ventilation (DCV)
• Simplifies installation/maintenance through
plug-n-play sensor
• Remote sensor option provides dual gas
monitoring (standalone version only)
• Optimizes BAS, fire, ventilation
and other security systems
Versatile Communications
• Works through BAS to improve fault
diagnostics and collect data on gas
concentation levels, sensor condition, etc.
• Couple with 301C to log data and
daisy-chain up to 96 E3Point units
Advanced Sensing Technology
• Detects CO, NO2, O2, H2, H2S, CH4, C3H8
• Advanced electrochemical (for toxic gases)
and catalytic bead (for combustible gases)
sensor performance
• Uses patented Reflex® and smart
cartridge technologies
Range of Accessories
• Factory-calibrated replacement cartridges
• Power transformer
• Vandal-resistant steel wire detector guards
• Tamper-proof screws
• Horns and strobes
Electrical Certifications
• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)
* pending - call your sales rep for information
Remote Unit
Plug-N-Play Ease
E3Point’s plug-n-play sensor is factory
calibrated and works out of the box. Upon
installation, E3Point automatically configures
for quick operation. You benefit from easier
installation and maintenance, and greater
adaptability to changing building
and safety requirements.
Ergonomic
features built into
3
E Point include a
hinged door for
maintenance ease.
Reflex® Keeps You Safer
Only Honeywell’s patented Reflex® technology
adds this extra degree of precision and diligence
to sensor monitoring to make doubly sure you’re
safe. Reflex bounces electrical signals into the
E3Point electrochemical sensor cell at regular
intervals, a form of electronic bump testing and
continuous monitoring of cell response.
Efficient
Energy + Economical
+
Make
your
operation
runValue
more = E3Point
Operations
Savings
intelligently
to
protect people,
Smart
sensor design,
On-demand
Reduces cost of
extreme temperature
ventilation controls
installation, operation
range,
etc. optimize andenergy
use bottom
and maintenance
property
your
line
building performance
NOTES
42
43
NOTES
NOTES
44
BRITISH COLUMBIA SALES OFFICES
INDEX
Product
Description
Page #
VANCOUVER SALES OFFICE
VICTORIA SALES OFFICE
KELOWNA SALES OFFICE
100-17717 65A Avenue
Surrey, BC V3S 1Z8
475 Tennyson Place
Victoria, BC V8Z 6S8
Toll Free: 1.877.288.7744
Ph: 250.475.1500 Fax: 250.475.1502
Email: [email protected]
www.ehpricevictoria.com
130 - 2375 Norris Rd. S
Kelowna, BC V1X 8G7
NIC
H
ROA
D
EET
S STR
GLA
DOU
IN
LOP
GAL
G GO
AVENUE
DAVIDSON
OSE
ALCAN ROAD
LOP
ING
BARBON
PLACE
NORRIS ROAD SOUTH
UE
S AVEN
BURN
PLACE
PENNO ROAD
ACLAND ROAD
RAIL
ADAMS ROAD
SE T
GOO
ENUE
176B ST
OKANAGAN HIGHWAY
GAL
AV
YSON
TENN
PACIFIC HWY
YSON
TENN
NORRIS RD
EET
S STR
GLA
DOU
ROAD
EDWARDS ROAD
ACLAND ROAD
IL
176A ST
INE
BOLESK
65A AVE
OKANAGAN HIGHWAY
TRA
66 AVE
Ph: 250.765.7226 Fax: 250.765.7224
www.ehpricekelowna.com
SAA
Ph: 604.777.1712 Fax: 604.777.1713
RUTLAND ROAD NORTH
LOCAL DELIVERY AVAILABLE | CONTACT YOUR E.H.PRICE SALES REPRESENTATIVE FOR MORE INFORMATION
SEXSMITH ROAD
OLD VERNON ROAD
OLD VERNON ROAD
CANADIAN HEAD OFFICE
638 Raleigh Street
Winnipeg, Manitoba Canada R2K 3Z9
Ph: 204.669.4220 Fax: 204.663.2715
• Canadian Head Office, Laboratory,
& Manufacturing Facilities in
Winnipeg, Manitoba
• Sales Offices or Representation in
all major Canadian cities
Product Improvement is a continuing endeavour at Price. Therefore, specifications are subject to change without notice. Consult your E.H. Price
Sales representative for current specifications or more detailed information.
Warranty: The Company warrants and guarantees that all goods within this brochure that have been manufactured by the Company have been manufactured in accordance with
the specifications published herein and will be free from defects in material and workmanship for a period of twelve (12) months from the Bill of Lading issued by the Company.
The Company will replace defective product at its option, but will not be responsible for labor or material charges in replacing product or consequential damages. Any installation
not conforming with the Company’s specifications, manuals, bulletins or instructions or any misuse or any modification not authorized by the Company voids this warranty. This
warranty is in lieu of all Provincial, State, and Federal statutory warranties and the conditions herein are in substitution and replacement of which warranties, statutory or otherwise.
Lithographed in Canada 2010
E.H. Price Sales, a division of E.H. Price Limited
A I R
D I S T R I B U T I O N
P R O D U C T S
F O R
W O R L D
C L A S S
C I T I E S

STOCK BOOK - EH Price Vancouver

Transcription

Similar documents

STOCK BOOK - EH Price Hamilton

Intimates Bali Bras Rank Vendor Vendor Style

Stockbook - EH Price Winnipeg

September 2008

Series C Roof Upblast and Sidewall Centrifugal Exhaust Fans

HVAC Control Dampers

CP Catalog - Loren Cook Company

SP Fans and Grilles