industry news - Canadian Manufacturing

Transcription

industry news
The Mechanical Contractors
Association of Alberta regularly surveys plumbing and
heating service contractors in
the province in order to produce a report on the average
breakdown of service work
on a job of 20 hours or less.
Contractor mark-ups are not
included.
Recently released results
from the associations’ April
2005 survey indicated that
direct labour costs total
$36.60. This breaks down to
$25.01 in journeyman
wages, $2.51 in vacation/stat
holiday pay, $1.04 in
employment insurance (EI),
$1.37 in Canadian Pension
Plan (CPP), $0.69 in worker’s compensation, $0.97 in
health care and $4.04 in
pension/bonus. The association totalled overhead costs
at $43.38, which combined
with the direct labour costs,
equals a total average cost of
$79.98 per hour.
Ontario Company Named Top Contractor to Work For
Atlas Air ClimateCare has been ranked among North
America’s top five HVAC contractors to work for. The
75-year old company, which
recently received ISO certification, was honoured with
the Best Contractor to Work
For 2005 award by the Air
Conditioning, Heating &
Refrigeration News, a U.S.
HVAC industry publication.
Atlas Air currently offers
service in the Greater
Toronto Area.
Saskatchewan Tax
Exemption Expanded
Saskatchewan’s sales tax
exemption for qualifying
energy efficient residential
appliances has been expanded to include Energy Star
qualified furnaces and boilers, according to the
Heating, Refrigeration and
Air Conditioning Institute
of Canada (HRAI). The
exemption is effective until
March 31, 2007 and applies
to all parts and equipment
that form part of a new
Energy Star-approved furnace or boiler, as supplied by
Roger Grochmal (l), president of Atlas Air ClimateCare,
accepts a Best Contractor to Work For plaque from John
Hall, business management editor for the Air Conditioning,
Heating & Refrigeration News.
the manufacturer or system
installer at the time of purchase or installation. Equipment that is leased for more
than one year also qualifies
for the exemption.
Contractors in the province who have purchased
and paid sales tax on qualifying, uninstalled equipment
prior to November 8, 2005
can apply for PST refunds;
however, installation of this
equipment must take place
before March 31, 2007.
For more on the exemption, visit www.gov.sk.ca/
finance/revenue/pst.
New Report Helps
Contractors Promote IAQ
The Canadian Institute of Plumbing and Heating (CIPH) will
hold its annual business conference (ABC) at the Rimrock
Resort Hotel in Banff, AB from June 18-21. Titled Journey to
the Summit of Excellence, this networking and educational
event promises to offer a diverse program and a host of distinguished speakers. Visit www.ciph.com to find out more.
22
HPAC •
80 years
MARCH 2006
Photo Travel Alberta
CIPH Heads to The Rockies
A report recently released by
the
Healthy
Indoors
Partnership (HIP) may help
contractors expand their
IAQ-product installation
opportunities. The report
titled Solutions for Healthier
Indoor Environments highlights the fact that although
many homeowners have an
interest in improving the
comfort of their homes, they
are, for the most part, unfamiliar with products and
services that can improve the
air in their houses.
The report issued by HIP
is focused primarily on residential ventilation and air filtration and details topics
such as: market drivers, barriers and related opportunities, and increasing understanding of indoor environment issues among the general public and key stakeholders.
The full report is available
for purchase from HIP. Visit
www.healthyindoors.com.
Construction of Solar
Community Nears
Completion
Just south of Calgary, AB, in
the town of Okotoks, construction of Canada’s first
solar community is almost
complete. The 52 singledetached houses in the
Drake Landing Solar
Community will have 90 per
cent of their space and water
heating needs met with solar
thermal energy.
This will be achieved with
the installation of a system
CONTINUED ON PAGE 24
Photo The News
Service Sector Survey
Results
A LEADER IN SHEET METAL
FOR THE HVAC INDUSTRY!
SHOW & TELL • D O N PA R K
PRESENTED BY
Don Park has been manufacturing the highest
quality sheet metal products since 1972, consistently offering assured quality, value and service.
We’ve grown from just one location and 8 customers, to today serving over 2,200 customers
with 400+ employees at 18 locations.
Whatever your sheet metal or venting
requirements, whether residential or
commercial, Don Park has your products.
www.donpark.com
We manufacture a complete line of galvanized
and aluminum pipe,
duct, and fittings; type B
gas vent; pellet pipe &
accessories; chimney
liners, caps and kits;
EasyBend aluminum flex
duct; and Ultra Duct flex
connectors and duct. In
addition we also offer an
extensive line of complementary HVAC products,
saving you money by
being a one stop shop.
At our Commercial ICI
Division, we manufacture a complete line of
union made yellow label
spiral pipe & accessories, custom rectangular duct, and AutoDamp
dampers. Look for our
new customer service
counter opening this
year.
At Don Park Fire
Protection Systems,
we offer an extensive
line of fire protection
products, ranging from
sprinkle heads, pipe, fittings & hangers, and
complete
fabrication
capabilities. We have
recently doubled our output with our new autmatic
robotic
welding
machine.
Take ADVANTAGE of our
experience and assured
quality, value & service.
Circle #6
industry news
Workers mounted 800 2.45-metre by 1.18-metre panels on the
garages situated behind houses in the Drake Landing Solar
Community to collect solar energy.
system will allow for solar
energy to be collected in the
summer and stored in the
ground where it can be
retrieved to heat homes in
the winter. Heat will be
delivered to each home using
the district energy distribution loop.
Along with their unique
heating features, the Drake
Landing homes will include
low water use plumbing fixtures. The houses will also be
built to meet the Natural
Resources Canada (NRCan)
R-2000 Standards for energy
efficiency.
Enermodal Engineering
did the mechanical design
for the project, while the
Energy Centre, district loop
and central solar collection
system were constructed
under the direction of Hurst
When You Can Hook Up?
PRESENTED BY
Why Fill Up
WESTERN NATURAL GAS
Energy Centre with shortterm thermal storage tanks
and a seasonal Borehole
Thermal Energy Storage
(BTES) system for longterm thermal storage. The
Photo Keith Paget – Sterling Group of Companies
that includes an array of 800
solar panels to capture solar
energy, a solar collector loop,
a below grade district heating loop that connects to
homes in the community, an
CONTINUED FROM PAGE 22
STAINLESS STEEL RECESSED
Dealer Inquiries Welcome
TOLL FREE:
1-800-661-8289
Circle #7
24
HPAC •
80 years
MARCH 2006
P.V.C. SURFACE MOUNTED
#8 – 13015 84th Avenue, Surrey,
B.C. Canada. V3W 1B3
tel: 604-599-1900
fax: 604-599-1404
email: [email protected]
web site: www.wngp.com
SHOW & TELL
•
Construction Management.
For more information
visit www.dlsc.ca.
Newfoundlander Awarded
Prestigious Bursary
David Doucett, a resident of
St. John’s, NL, is the most
recent recipient of the
Heating, Refrigeration and
Air Conditioning Institute’s
(HRAI’s) Orvil L. Davie
Award. Doucett is in the
process of completing his
Certificate of Mechanical
Engineering Technology at
the College of the North
Atlantic and has an Aaverage in Materials and
Processes as well as Fluid
Mechanics.
The aim of the Orvil L.
Davie Award is to encourage
TIKI TORCHES
THE LATEST CRAZE!
Designed for both commercial and
residential applications, these dramatic
torches can be easily connected to propane, or
hooked-up to one of our
'Kwik Disconnect' Natural
Gas Outlets. Simple to set
up and store, they instantly bring romance to any
patio setting. So, bring a
little of Hawaii home, call
your nearest dealer now!
CALL TOLL FREE:
1-800-661-8289
/ Ê-/°Ê7" ½/Ê/Ê"°
/" Ê-9-/°
/,"1
Ê/Ê-,/ Ê
"

)TSTHENEWPUSHFITCONNECTIONSYSTEMTHATS
REALLYTAKINGHOLD/UR3HARK"ITE lTTINGSARETHE
FASTESTEASIESTWAYTOJOIN
COPPER#06#OR0%8PIPE
INANYCOMBINATION7ITHNO
SOLDERINGCLAMPSUNIONS
ORGLUE!NDTHEOUTSIDEDIAMETERCONNECTIONMINI
MIZESTHEFLOWLOSSCOMMONWITH0%8FITTINGS
*USTINSERTTHEPIPEANDTHESTAINLESSSTEELTEETH
BITEDOWNANDGRIPTIGHTWHILEASPECIALLY

FORMULATED/RINGCOMPRESSESTOCREATEAPERFECT
SEAL$ISASSEMBLYISJUSTASFASTUSINGTHESIMPLE
DISCONNECTTOOL3OlTTINGSCANBEEASILYCHANGED
ANDREUSED4HEYCANEVENBEROTATEDAFTERASSEMBLY
FOREASIERINSTALLATIONINTIGHTSPACES
4HENEW3HARK"ITEPUSHlTCONNECTIONSYSTEM
AVAILABLEINlTTINGSIZES
AND)TLL
EATYOURINSTALLATION
COSTSFORLUNCH
4OLLFREEIN#ANADAsWWWCASHACMECAs!$IVISIONOF4HE2ELIANCE7ORLDWIDE#ORPORATION
Circle #258
Two Quebec Buildings
Receive Sustainability
Awards
Innovative, energy efficient features like the ice bunker, which can
be seen through this window in the floor and acts as an alternative
to conventional air conditioning, helped TOHU to win first place in
the public assembly category of
ASHRAE’s Technology Awards.
PRESENTED BY
A Montreal circus big top
and Saint-Constant alternative school were recently
honoured with Technology
Awards from the American
Society
of
Heating,
Refrigerating and AirConditioning Engineers
(ASHRAE). The two build-
ings were chosen because
they display innovative
building design in the areas
of occupant comfort, indoor
air quality (IAQ) and energy
conservation.
Laurier Nichols, team
leader, energy efficiency for
Dessau-Soprin in Longueuil,
QC received first place in the
alternatives and/or renewable energy use category for
L'Ecole Du Tournant. The
school has no greenhouse gas
emissions and is the most
energy efficient school in
Quebec. The school includes
a high quality building envelope and a low energy
HVAC/R system with an
intelligent control system.
Martin Roy, president of
Martin Roy and Associates
in Deux-Montagnes, QC,
received first place in the
Photo Alex Legault
students to seek careers in
the HVAC/R industry by
providing bursaries to those
requiring financial assistance. Recipients of the
award can apply it to registration fees, tuition, training
materials and any travel and
living expenses related to
their course of study.
For more information on
the award, visit www.hrai.ca.
STIEBEL ELTRON
industry news
WHOLE HOUSE TANKLESS
WATER HEATING SYSTEM
Advanced technology, energy and money saving performance, and a sleek compact design
make it easy to consider a new Stiebel Eltron
TEMPRA tankless electric whole house water
heating system as a cost effective replacement
for antiquated tank-type water heaters.
Changing to a TEMPRA system on average
results in energy savings of about 20%. The
unit heats the water instantaneously for an endless supply of hot water.
SHOW & TELL
•
Features:
• Compact dimensions free up valuable space
• Digital controls for precise water temperature
• Saves energy and money
www.stiebel-eltron-usa.com
Circle #8
26
HPAC •
80 years
MARCH 2006
Give Your Customers The Innovation They Want
In A Brand Name They Trust.
The Serin Series of Lifestyle Baths and Whirlpools.
Your TotalBathroom Company
CUSTOMER CARE CENTRE: 1-800-387-0369
Circle #9
www.americanstandard.ca
RUUD AIR CONDITIONING DIVISION
RU U D
The Ruud brand has stood for quality and
set the standard for reliability for over 100
years. Craftsmanship and dedication to
detail characterizes every Ruud product,
program and service, yet the company is
dedicated to continuous improvement in
every area. Hands-on Contractor involvement in product development, testing, and
refinement is at the heart of Ruud.
Reliability is earned over time, customer
by customer; that is why Ruud heating
and cooling products have been rated a
top performer compared to other brands
by tens of thousands of consumers. Ruud
is Reliability.
• A Full Line of Low Profile 13-SEER A/C
& HP giving you a CHOICE of R-22 or R410A Refrigerant. 14, 16, & 18 SEER
Models Available
• Industry's Strongest Furnace Line
• Three All New Air Handlers and 4
Efficiency Levels & New N-Coil
• Contractor Support That Makes A
Difference
• Feature Loaded Light Commercial Line
ranging from 2-to 25-tons
• PROSTOCK STORES & PROTECH
Parts providing Contractors what they
need where and when they need it
• A Full Menu of Customized local contactor support programs and services
designed for improved bottom line result
• Expanded Offering Of Technical,
Business, and Sales Training Programs
available from The Training Network:
Tools For Success
•
SHOW & TELL
PRESENTED BY
Company Profile
Over a Century of Reliable Leadership
The Ruud story started in the 1880's when
a young Norwegian engineer came to
North America and developed the first
successful automatic water heater. Since
then, Ruud has grown to be one of
Canada's and the world's most respected
brands of heating and cooling systems for
home and business.
Our hard-earned reputation for product
excellence has only been possible owing
to the thousands of contractors from the
Northwest Territories to Florida. Their realworld suggestions helped elevate the
durability of products with new innovative
benefits that are quieter, more efficient,
long lasting, easier to install and service.
Ruud approaches things simply. Listen to
what contractors need, respond with realworld solutions that improves Contractor
profitability and customer satisfaction.
Each year more and more contractors
throughout Canada find that doing business with Ruud is faster, easier, simpler…and healthier to their bottom line.
Isn't it time that you benefited from these
advantages too?
Circle #10
industry news
public assembly category for
TOHU, a concert hall dedicated to the circus arts in
Montreal. The building features natural ventilation, passive solar heating, water conservation, energy efficiency,
use of wasted heat and an ice
bunker, in which a liquid,
kept below the freezing
point, travels through tubes
turning water in the bunker
into ice.
The ice bunker allows cooling capacity, which is needed
during shows, to be stored for
extended periods of time.
To view all of the
ASHRAE award winners
visit www.ashrae.org.
Canadian Takes the Helm at NKBA
Al Pattison, CMKBD, who is currently
the manager at Kitchen Korner in
Aldergrove, BC, has been elected president of the National Kitchen & Bath
Association’s (NKBA’s) 2006 executive
committee. Pattison founded the association’s Western Canada chapter and has served as a chapter officer and on the national board of directors since
1988.
The NKBA’s annual trade show, K/BIS, will take place
from April 20-23 at McCormick Place in Chicago, IL.
For more information on the event visit www.nkba.org.
Toronto Company Wins Boiler From Slant/Fin
McKinnon Heating Cooling, a company that provides and services air comfort systems in homes,
condominiums and businesses, was awarded a free
boiler from Slant/Fin as part of a recent sales promotion. Ralph Mulder of Slant/Fin was on hand to
present McKinnon staff with a free boiler certificate.
From l to r: Glenn Thompson, Ralph Mulder, Jim
Barless, Michael Nepom, Mike Butler and Barry
Martin.
Housing Starts Climb
in January
Circle #11
30
HPAC •
80 years
MARCH 2006
The 2005 seasonally adjusted annual rate of housing
starts rose overall from
December to January from
232,600 to 247,900, according to Canada Mortgage and
Housing
Corporation
(CMHC).
Increases in both single
and multiple starts resulted
in an overall increase of 8.2
per cent in the seasonally
adjusted annual rate of urban
starts. In January single starts
rose 14.3 per cent to 111,800
units and multiple starts
climbed 2.4 per cent to
103,500 compared to the
month prior.
Urban housing starts increased in all regions across
the country in January
except for British Columbia, which experienced a 5.3
per cent decline to 31,900
units.
In the Atlantic region the
seasonally adjusted annual
rate of housing starts sky-
rocketed 79.5 per cent to
13,100 units. Ontario experienced an increase of 9.9 per
cent to 86,800 units,
Quebec saw a 6.2 per cent
gain to 43,000 units and the
Prairies experienced a 5.5 per
cent increase to 40,500
units.
In January 2006 actual
urban starts were 23.2 per
cent higher than they were in
January 2005.
According to CMHC’s
first quarter Housing Market
Outlook, Canada Edition
report, housing starts will
moderate in 2006. After
reaching 225,481 units in
2005, CMHC predicts
housing starts will taper to
208,700 units in 2006. For
more see www.cmhc.ca.
Funding Available For
Energy Efficient Projects
Ontario’s
Conservation
Bureau is currently accepting
proposals through its
DANFOSS
PRESENTED BY
SHOW & TELL
•
QUALITY OIL BURNER COMPONENTS
Danfoss is a global
leader in the development and production
of quality oil burner
components. Product
quality is assured
through ISO 9001 certification. While quality
is very important, the
environment is equally
important. As an environmentally responsible
company, Danfoss has also achieved ISO 14001
certification. The Danfoss BFPH fuel unit exemplifies these standards. A unique automatic by-pass
provides easy installation in one-line supply or
two-line supply/return applications. The internal by-pass
automatically opens to the
supply side of the pump should
any pressure develop on the
return side of the pump.
A technician has no concern
about installing a manual by-
pass plug or rupturing shaft seals. Complementing
the automatic by-pass is a mechanical, fluid shaft
seal rated at 30 psi. This seal design not only
retains fuel within the pump but also ensures no
pump vacuum leakage in applications where vacuum loss can be a problem. Quality is assured by
means of continuous monitoring throughout the
production process. 100% of all fuel units are tested before leaving the production line. Nozzles
ensure the pressurized fuel from the fuel unit is
atomized properly for combustion. Danfoss nozzles have evolved through more than 50 years of
research and development. Close tolerances to
rated output and in spray pattern create a high
quality nozzle for consistent combustion results.
Available in outputs from .30 to
30 gph, various spray patterns
and angles are available to
meet the requirements of
today’s most demanding applications. As with the fuel units
all oil nozzles are 100% tested
before leaving production.
The Heart of Heating
• BFPH fuel unit with automatic
bypass for one-pipe or two-pipe
installation
• Oil nozzles with three spray
patterns, six spray angles and
capacities from 0.3 gal/h to
30 gal/h.
2008
Danfoss, the leading manufacturer of oil burner components worldwide
Danfoss Inc. • 7880 Tranmere Drive • Mississauga, Ontario L5S 1L9 • Canada • Telephone: (905) 676-6000• E-mail: [email protected] • www.danfoss.com/burner
Danfoss Inc. • Burner Components • 7941 Corporate Drive • Baltimore, MD 21236 USA • Telephone: (410) 931-8250 • E-mail: [email protected] • www.danfoss.com/burner
Circle #12
MARCH 2006
80 years • HPAC
31
industry news
The Refrigeration Service
Engineers Society (RSES)
Lions Gate chapter is holding a logo design contest,
which is open to all members. The BC chapter is
looking for a logo that is
reflective of both the industry and the organization.
All members who participate will be entered in a
draw for a gift card from a
supplier of their choice and
the member who submits
the winning logo will receive
one full year of RSES dues
paid for by the chapter.
Entries can be submitted
to Barry Hawse at fax.
604-575-0663 or email
[email protected].
The deadline for entries is
June 30, 2006.
Stats Indicate Building
Boom in 2005
According to Statistics
Canada (StatsCan), 2005
was a record breaking year
with the total value of construction permits surpassing
the $60-billion dollar mark
for the first time ever.
Contractors took out $60.7
billion worth of building
permits in 2005, which is 9.3
per cent more than the last
record high of $55.6
billion issued in 2004. $6.3
billion in permits were issued
in December 2005 alone.
Construction intentions
reached record highs in 2005
in all provinces except for
Quebec and Manitoba, as
well as Newfoundland and
Labrador. StatsCan attributes
the increases to a rise in non-
RATECH
RSES Logo Contest
PRESENTED BY
Conservation Fund for projects that advance electrical
energy efficiency in the
province.
Grants are available
through the Conservation
Fund for projects that
raise residential and commercial customer awareness
about electricity conservation options and encourage
these customers to undertake
demand management measures, which deliver measurable results.
Projects provided with
funding in 2005 included
housing retrofits and appliance exchange programs.
The next application deadline is May 26, 2006. Check
www.powerauthority.on.ca
for more information on
these grants.
residential permits in particular, with Alberta and British
Columbia fuelling a significant portion of the gain.
Overall the value of nonresidential permits totaled
$22 billion in 2005, which is
a 17.6 per cent increase compared to $18.7 billion the
year prior. If Alberta and
British Columbia’s permits
were excluded from this
total, the annual value
of non-residential permits
would have risen by only 3.3
per cent.
British Columbia and
Alberta and were also largely
responsible for an overall rise
in the housing sector. The
value of residential permits
rose 5.1 per cent to $38.7
billion in 2005.For more see
www.statcan.ca.
CCTV VIDEO PIPELINE INSPECTION
SYSTEMS & EQUIPMENT
Plumber’s Elite DVD-R
Record DIRECT to DVD
• Portable inspection
SHOW & TELL
•
system for pipes
2”-10” in diameter
• 15" LCD monitor
and DVD recorder
with 160GB HDD
• Record 290 hours
of inspections on the
built-in hard-drive
• 200 feet of push cable (longer lengths
available)
• Includes built-in 512Hz transmitter
• Built-in microphone, camera test port, and
dual voltage
• Keyboard for text titling
• On-screen display of distance counter, data,
time/date
1-800-461-9200
www.ratech-electronics.com
Circle #13
32
HPAC •
80 years
MARCH 2006
OS&B
PRESENTED BY
EVOLUTION THROUGH INNOVATION…
SHOW & TELL
•
OS&B celebrates its 30th Anniversary!
From humble beginnings 30 years ago, OS&B has grown to become one of Canada's largest
and most recognized manufacturers and suppliers of quality plumbing products.
The OS&B name and logo has become synonymous with quality, selection and service. In
addition to serving the Canadian wholesale market from coast to coast, we are a major supplier to the OEM industry worldwide. Along the way, we've introduced many new and unique
products. It was, however, our introduction of the revolutionary Clicker™ - a product that
spawned imitators the world over - that put OS&B on the world stage as a leading innovator
in the plumbing industry.
On September 1st of 2005, ownership of OS&B changed hands. With renewed vigor and an
aggressive mandate, OS&B plans to build on past successes to grow into an even better
product and service provider. By listening to distributors, contractors, agents, end users and
our experienced employees, innovative new products are just part of what you can expect.
Simplicity of service, and world-class support, is the other.
OS&B - 30 years and growing.
Evolution Through
Spin-on
Tieplate
INNOVATION
NEW
IMPROVED!
Angle
Adaptor
Designer
Faceplate
Spin-on
Tieplate
NEW
IMPROVED!
ORIGINAL
ORIGINAL
Adjustable
Corrugated
Pipe
OAKVILLE STAMPING & BENDING LTD.
905.827.0320
905.827.6375
www.osb.ca
Circle #14
MARCH 2006
80 years • HPAC
33
PRESENTED BY
B R A D F O R D W H I T E - C A N A DA
SHOW & TELL
•
THE WAY IT SHOULD BE
Manufacturer
Wholesaler
There have been many positive changes at
Bradford White in the past couple of years.
With so many new products, new acquisitions and new technologies, we thought the
timing was right to re-introduce you to
“Everything Bradford White”.
Simply put, Bradford White has it all; from 2gallon compacts to industrial giants, and
from the super-efficient eF Series® – the
standard of the class – to large volume storage tanks with capacities up to 5,600 gallons, we set the mark by which others measure themselves. Our Defender Safety
System™ FVIR Technology is second to
none and our EverHot® line of tankless, gas
powered water heaters has taken the
Canadian market by storm.
We have expanded our line of PowerStor
Series™ Indirect Water Heaters through the
recent purchase of AEROSO, a manufacturer of stainless steel indirect water heaters.
Now branded as Aero Series PowerStor SS,
they are available in 40, 52, 75, 75D (double
coil), and 119 gallon sizes. For residential
installations, the warranty has been improved
to a limited lifetime warranty.
Bradford White's acquisition of Niles Steel
Tank has also expanded our offerings, now
enabling us to provide storage tanks with
capacities up to 5,600 gallons. These competitively priced tanks are available glass
lined, double glass lined, epoxy lined, or in
stainless steel. They are available bare, jacketed or with a polyurethane foam insulation
protected by a weatherproof acrylic outer
coating. No matter what the application,
there's likely a Bradford White made solution
for you.
Contractor
We continue to enjoy great success with our
eF Series® commercial water heaters. The
eF Series® is noticeably quieter than any
other water heater in its class – a significant
benefit that is much appreciated by building
owners, managers and occupants. These
heaters also have remarkable thermal efficiency ratings (as high as 99.1%!) and offer
exceptional installation flexibility. All models
can vent vertically or horizontally and are
approved for unbalanced, direct-vent closed
combustion applications.
eF Series
Aero Series Multi-Flue
Oil-Fired Water Heater
Like many aspects of the mechanical industry, changes in standards continue to shape
the water heater industry. In 2005, CSA
announced the requirement of blocked flue
vent switches for all oil-fired equipment.
Responding to these changes, blocked flue
vent switches are now supplied as standard
equipment on all Bradford White oil-fired
water heaters and pool heaters.
Throughout all these changes, one thing
remains constant; Bradford White products
are sold exclusively through wholesale distribution. We are committed to being your partner, not your competitor. You can rest
assured that every Bradford White product
on the market has traveled down the road
from Manufacturer to Wholesaler to
Contractor. We are committed to the professionals who sell, install and service our
products.
Count on Bradford White for
Everything Hot Water
EverHot
When the job
seems endless
EverHot® Tankless
Water Heaters
just don’t quit.
No accolades are needed. Bradford White is happy to offer
the EverHot® line of tankless, gas-fired water heaters. Whether
your application is residential or commercial, EverHot® models
efficiently and quietly work hard behind the scenes providing
a continuous supply of hot water.
These compact, powerful water heaters can
be installed indoors or out and supply hot
water at the desired temperature to multiple
points of use simultaneously. With an
Separate primary
remote controller –
outdoor models.
exceptional flow rate, an EverHot® model can
provide all the hot water needed.
Shower after shower, load after load of laundry, EverHot®
Integrated
primary control –
indoor models.
tankless water heaters from Bradford White save energy,
save space and save money. Your customers will value the
comfort and convenience of on-demand, endless hot water!
For more information on the EverHot® water heaters
please contact your Bradford White representative.
Mississauga, ON
866-690-0961
Count On Bradford White
For Everything Hot Water ™
www.bradfordwhitecanada.com
©2005, Bradford White Corporation. All rights reserved.
Circle #15
KNAUF KOOLDUCT SYSTEM OFFERS
UNIQUE DESIGN FLEXIBILITY,
INSTALLED PERFORMANCE
K N AU F I N S U L AT I O N
•
SHOW & TELL
PRESENTED BY
There's a new solution for unique ductwork
challenges in the Canadian market - the Knauf
KoolDuct System.
The Knauf KoolDuct System features a CFCfree closed cell phenolic foam board faced on
both sides with reinforced aluminum foil, with
patented aluminum flanges used to connect
the duct sections with a strong, tight closure.
The system offers airtight, energy-efficient
installed quality, as a UL 181-rated system
that easily meets SMACNA Leakage Class 6
for high-pressure ductwork while providing 1.2
R.S.I at 22 mm and 1.5 R.S.I at 28 mm. And
with a fully aluminum-faced airstream surface,
the Knauf KoolDuct System delivers indoor air
quality performance with easy cleaning and
maintenance.
The Knauf KoolDuct System can also be
installed flush against the wall or ceiling,
making better use of space in the ceiling cavity, and is easily fabricated to accommodate
piping or other unexpected obstructions - two
key advantages over wrapped sheet metal
ductwork.
The system has been used in major industrial and commercial projects across the globe
for nearly three decades. In late 2003, Knauf
acquired exclusive rights to bring this highperformance option to the North American
construction industry. The Knauf KoolDuct
System has quickly won converts among
architects, engineers and contractors, and is
being used with great success on projects
across the continent.
The Knauf KoolDuct System also brings compelling benefits to the design and construction
phases of a project. Weighing just 15% as
much as a corresponding section of sheet
metal ductwork, Knauf KoolDuct is easy to
handle and install. And because pre-insulated
Knauf KoolDuct is installed as a finished system, there's no need for two trades on site.
This saves significant time and labour, helping
projects stay on schedule and within budget.
For more information on the Knauf KoolDuct
System, visit www.KnaufUSA.com/koolduct,
write to Knauf Insulation, One Knauf Drive,
Shelbyville, IN 46176 or call 800-825-4434
ext. 8215.
ZERO MARGIN
OF ERROR
BECAUSE YOUR REPUTATION DEPENDS ON THE BEST.
PRECISION PIPE INSULATION FROM KNAUF.
You have a reputation to protect. The job has to be done right – first time, every
time. That’s why Knauf delivers consistent quality with every piece of pipe
insulation. We manufacture our pipe insulation in a dedicated ISO 9001:2000
certified plant in Shelbyville, Indiana, with workers averaging 16 years of
experience. We use the same mandrel-wound process for every product size,
for consistent wall thickness, more precise fabrication and easy installation.
That means a clean, uniform system that delivers the specified performance.
With a wide application temperature range and full array of sizes, Knauf’s fiber
glass pipe insulation is ready for any job – because when your reputation is on
the line, there’s zero margin for error. For more information, contact Knauf at
1-800-825-4434 ext. 8283 or visit our website at www.KnaufUSA.com.
© 2006 Knauf Insulation GmbH.
Circle #16