AUCTION SALE - Koster Industries

Transcription

AUCTION SALE - Koster Industries
AUCTION SALE
acity
Large Cap & Wire
Molder
Injection Fabricator
and Tube
BY ORDER OF SECURED PARTY
Manufactu
rer of
Shopping
Carts, Ha
nd
Baskets &
Material
Handling
Carts
1301 Battery Brooke Parkway, Richmond, Virginia 23237
Featuring: [12] Injection Molders – up to 2200 Ton, New As 2000! • CNC Wire Former & Benders – New as 2004!
• Over [20] SMS and Pines Tube Benders • 2004 CNC Tube Bender • 4-Slides • Straighteners & Cut-Offs • Stamping
• Welders • Bridge Cranes – up to 40 Ton – New In 1990s! • Powder Coat Booths • Water Treatment • Plus So Much More
NEW
2000
1995
1500 Ton HPM Mdl. H1500-400 Injection Molder
2200 Ton HPM Mdl. HM2200 Injection Molder
2004
AIM Mdl. AFM-3D2T 3-D CNC Wire Former & Cut-Off
2004
Bema Mdl. Rekord 45 CNC-DS CNC Horizontal Tube Bender
AUCTION DATE: THURSDAY, MARCH 5TH, STARTING AT 10:30 A.M.
INSPECTION DATE: WEDNESDAY, MARCH 4TH FROM 8:00 A.M. TO 4:00 P.M. AND MORNING OF SALE
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
http:www.kosterindustries.com • e-mail: [email protected]
2004
1000 Ton UBE Mdl. UZ1000/185 Injection Molder
Rebuilt
2000
1999
1100 Ton HPM
Mdl. HM-1100
Injection Molder
100 HP Cumberland
Mdl. 81GRAN-3KN
Plastic Grinder
2000 Ton HPM Injection Molder
Rebuilt
1999
INJECTION MOLDERS
400 Ton Van Dorn Mdl. 400-RS-48F, 48 oz. shot,
42" x 42" platens, 28" x 28" tie bar spacing, 52"
max. daylight, vacuum loader, Pathfinder SEL
control, S/N: 333 [1993]
2200 Ton HPM Mdl. HM2200, 439 oz. shot, HPM
4500C control, approx. 57" x 72" tie bar spacing, loader
hopper, S/N: 6802053/99368 [2000]
400 Ton Van Dorn Mdl. 400RS-48F-HT, 40 oz.
shot, 42" x 42" platen, 28" x 28" between tie bars,
vacuum loader, Pathfinder SEL control, S/N: 183
[1991]
2000 Ton HPM 2000-Mark II WP400, 400 oz. shot,
80" x 80" platen, 72" x 52" tie bar spacing, 114"
daylight, vacuum loader, HPM Command 900 control,
S/N: 91236 [1991], Note: Injector Screw Missing
1500 Ton Cincinnati Mdl. PC-3 Injection Molder
PLASTIC GRINDER
Cumberland Mdl. 81GRAN-3KN, 100 HP, 27" x 37"
opening, S/N: 8100-742
Also Available: Large Quantity of Colorant For Product
2000 Ton HPM, 400 oz. shot, 80" x 80" platen,
72" x 52" tie bar spacing, 114" daylight, vacuum
loader, S/N: 80260 [1980 – Rebuilt 1999 By Epco]
RESIN DELIVERY SYSTEM & SILOS
2000 Ton Cincinnati Milacron Mdl. VL2000-362, 362
oz. shot, core pull, Camac 486 control, 73" x 63" tie bar
spacing, vacuum loader, S/N: H24A0194006 [1994]
[2] 50 HP Blower Units (Outside), [2] NBE 178,000 Storage
Silos 18' x 32', Conair 25 HP PD25 Vacuum, 44,000# NBE
Storage Tank, Novatec VH10 10 HP Delivery Blower, UnaDyne Sensing System
[Late 1990s Equipment!]
1500 Ton HPM Mdl. H1500-400, 400 oz. shot, 52" x
52" tie bar spacing, vacuum hopper, 104" max. daylight,
76" x 76" platen size, HPM Command 9000 control,
S/N: 95152 [1995]
1500 Ton Cincinnati Milacron, Mdl. PC-3, 300 oz.
shot, 78" x 78" platen, 55" x 49" tie bar spacing, 120"
max. daylight, vacuum loader, Epco Mdl. E4000 control,
S/N: 415A01/82-1 [1982 – Rebuilt 1999 By Epco]
1100 Ton HPM Mdl. HM-1100, HPM Command 4500C
control, vacuum loader, 50" x 50" between tie bars,
S/N: 8801073, 99359 [2000]
1000 Ton UBE UZ1000/185, 185 oz. shot, 60" x 50" tie
bar spacing, cor sequence, 74" x 68" platen area, UBE
CNC controls, S/N: 78687 [2004]
650 Ton HPM 650X60, 60 oz. shot. 48" x 48" platen,
30-1/2" x 30-1/2" tie bar spacing, 65" max. daylight,
vacuum loader, S/N: R93493
441 Ton Battenfeld Mdl. BA-C 4-000/1600, 22.1 oz.
shot, 43.3." x 43.3" platen, 28.9" x 28.9" tie bar spacing,
vacuum loader, ABSLC500 controls, S/N: N/A [1984]
View of Resin Silos & Resin Storage Tank
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
http:www.kosterindustries.com • e-mail: [email protected]
2
CNC WIRE FORMING & CUT-OFF
2004 AIM Mdl. AFM-3D2T, 3-Dimensional, 3-D
tilt table, .430" max. diameter wire, [2] 11-roll
& 4-roll straightener, internal cut-off, AIM CNC
controls, S/N: 02911102004
2004 AIM Mdl. AFM-2D2T, 2-dimensional,
.430" max. diameter wire, [2] 11-roll & 4-roll
straighteners, Mdl. AW-21 gantry style butt
welder and robotics parts pciker, AIM CNC
controls, S/N: 04511102004
OMCG Mdl. CNC 19 CNC Wire Former, with
½" dia. capacity, .98" x .118" strip capacity, 105
SPM and controls, S/N: 19A11 [1994]
2004
1 OF 2
½" Shuster Mdl. 3AV Wire Straightener & Cut-Off,
1984 & 1992
CNC HORIZONTAL TUBE BENDER
AIM Mdl. AFM-2D2T 2-D CNC Wire Former & Cut-Off
BEMA “Rekoro 45 CNC-DS”, right hand, 1.75"
capacity, 3-axis, 10" radius bend, variable radius,
CRT screen, S/N: 2745 [2004]
WIRE STRAIGHTENER & CUT-OFFS
½" Shuster Mdl. 3AV, 14' runout, S/N: 3AV-120
1994
½" Lewis Mdl. 9-F, 12' run-out, S/N: 9F-146-12
Xerox Mdl. 4635 Laser Printers
½" Shuster Mdl. 3AV, 14’' run-out,
S/N: 3AV-339-92
¼" Lewis Mdl. 2C, 9' run-out, cut-off,
S/N: 2C-346
FOUR-SLIDES
¼" Nilson Mdl. S-432, 2-plane, 7-roll
straighteners, light curtain, S/N: 102600 [1977]
OMCG Mdl. CNC-19 CNC Wire Bender, Former & Cut-Off
¼" Tornquist Mdl. 4-82 Four-Slide
¼" Tornquist Mdl. 4-82, 2-plane straightener,
cage enclosure, S/N: 75960
VERTICAL TUBE BENDERS – ASSORTED PINES AND SMS
Pines Mdl. 5T, 20 HP, Control-A-Bend PLC, S/N: 44362-90057
Pines Mdl. M24589, 20 HP, S/N: 44362-92077
[3] Pines Mdl. M-24550, 40 HP, Pines Digital Dial-A-Bend PLC, S/N: 44810-71382; 44850-94082;
44850-92047
[6] Pines, Pines Dial-A-Bend PLC, 20 HP, S/N: 44361-90164; 44361-94075; 44361-84047;
44362-95113; 44362-93087; 44362-90057
[3] Pines, 20 HP Hydraulics, PLC controls, S/N: 44362-72101; N/A
SMS, Control-A-Bend, 20 HP hydraulics, PLC, S/N: N/A
PINES 3T, 20 HP hydraulics, PLC control, S/N: 3T-117
Partial View
of Pines and
SMS Vertical
Tube Benders
SMS Mdl. 5TV, 20 HP, plc control, Mierguarr floating blank, S/N: 98009
Pines Mdl. 60025, 40 HP, Dial-A-Bend PLC, S/N: 44350-67008 [Rebuilt By Pines]
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
http:www.kosterindustries.com • e-mail: [email protected]
3
SWAGER
Fenn #3F-2 Swager, 2-die, S/N: 53222
STAMPING PRESSES – ALL TYPES
150 Ton Minster G1-150 Gap Frame, 30" x 50" bed,
air clutch, S/N: N/A
105 Ton Verson Mdl. 7-1/2 Open Back Inclinable,
back geared, 8" stroke, 18" shut height, 39" x 30" bed,
35 SPN, S/N: 19486, with Jaybird Mdl. J15-624 Air
Feed, S/N: R1463, 1,000# America Steel Line Co. #60
Motorized Uncoiler, S/N: 6132 10/74
[2] 105 Ton Verson Mdl. 7-1/2 Open Back Inclinable,
8" stroke, 4" adj., 18" shut height, 30" x 39" bed,
S/N: 7127; 8432
100 Ton Rousselle Mdl. 10SS100 Straight Side,
air clutch, 30" x 100" bed, dual palm, Allen Bradley
panelview PLC, S/N: HPSA4008863
Fenn 3F-2 Swager
150 Ton Minster G1-150
105 Verson Mdl. 7-1/2 Open Back
Open Back Inclinable Press Inclinable Back Geared Press
100 Ton Rousselle Straight
Side Press
Minster #6 Open Back
Inclinable Press
100 Ton Rousselle Mdl. 10SS100 Straight Side,
30" x 98" bed, air counter balance, dual palm,
S/N: P30809
100 Ton Bliss Ndl. 25-S-102 18" x 130" bed,
palm buttons
90 Ton Minster Mdl. #8 26" x 40" bed, air clutch,
S/N: 8-10737 [As Is]
80 Ton C-Frame Punch Press, 4" stroke,
12" shut height
80 Ton Niagara #5, Open Back Inclinable, air clutch,
27" x 39", S/N: N/A
65 Ton Walsh Mdl. 65X, Open Back Inclinable,
back geared, 5" stroke, 25" x 36" bed, 75 SPM,
air clutch, S/N: 12065 [1975]
62 Ton Ohma Mdl. P6200-M177 Air/Hydraulic
C-Frame Press, 16" stroke, 8" throat, dual palms,
S/N: W001536/1 [2004]
60 Ton Minster #6 Open Back Inclinable, Fly Wheel
Type Punch Press, air clutch, 4" stroke
60 Ton Bliss #21-1/2 Open Back Inclinable, back
geared, mechanical clutch
60 Rousselle #6F Deep Throat Open Back Inclinable,
air clutch, 4" stroke, 11-1/2" shut height, S/N: 17086
27 Ton Johnson Open Back
Inclinable, Flywheel Type, air clutch
60 Ton Niagara Mdl. M-60 Open Back Inclinable,
4" stroke, 20.25" shut height, 21" x 32" bed, air clutch,
S/N: 42681
45 Ton Niagara M-45 Open Back
Inclinable, Flywheel Type, 3-1/2"
stroke, 12" shut height, air clutch,
S/N: 36573
60 Ton Rousselle Mdl. 6W-76, 16" x 76" bed,
adjustable bed, air clutch, 100 SPM, 2" stroke, 17.5"
shut height, S/N: 25227 [1979]
60 Ton Ohma Mdl. P6000-M146 C-Frame
Air/Hydraulic Press, 8" throat, dual palms,
S/N: 14582REVE
50 Ton Denison C-Frame Hydralic Press, S/N: N/A
[As Is]
45 Ton Minster #5 Open Back Inclinable, back
geared, air clutch, 28" x 16" bolster, 70 SPM, 4" stroke,
11.25" shut height, S/N: 5-15426
15 Ton Deshazo Single Girder
Bridge Crane, pendant control,
S/N: 15942 [1999]
32" Ton Minster #4 Open Back Inclinable, 100 SPM,
11.5" shut height
32 Ton Minster #4 Open Back Inclinable, 3" stroke,
12" shut height, air clutch, S/N: 25203; 4-SS-25263
60 Ton Ohma
Mdl. P6000-M146 C-Frame
Press
BRIDGE CRANES – NEW 1999
40 Ton Deshazo Double
Girder Overhead Bridge Crane,
Detroit 40 Ton Top Running Hoist
with 10 Ton Auxilliary hook,
S/N: 147156 [1999]
45 Ton Johnson Open Back Inclinable FlywheelType, ISB-PC-100 press control, dual palms, air clutch,
S/N: N/A, with Rowe Mdl. 3015-J coil cradle, 3,000#
capacity, 48" dia., S/N: 11942
2000
[2] 22 Ton Bliss C-22 Open Back
Inclinable, Flywheel Type, 1-1/2"
stroke, 10-1/4" shut height, S/N:
H50996; HD38133 [1961]
40 Ton Deshazo
Double Girder
Bridge Crane
1999
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
http:www.kosterindustries.com • e-mail: info@kosterindustries.
com
4
Kaeser SFC37 Air Compressor, 226 CFM
Rebuilt
1992
1999
600 KVA McCreery Mdl. MPP-600-42 Spot Welder
Janda 4-Head Mdl. M36-4-150 Welder
PRESS BRAKES
14-Head Custom Built Welder, [6] 150 kva
transformers, Entron EN1000 solid state control,
26" x 28" shuttle table
175 Ton x 10' Chicago D & K Mdl. 175-08, permanent
flanged bed and ram, motorized ram adjustment, dual
palms, S/N: 9839 [As Is]
150 Ton x 10' Cyril Bath Mdl. 150-7-10, 36" wide
permanently flanged bed and ram, S/N: PT-6213 [1962]
90 Ton x 8' Verson Mdl. 306-90, 3" stroke, air clutch,
S/N: 20151
Janda Mdl. SP6HD 6-Head Spot Welder
2-Head Custom Built Welder, 75" overall frame,
pneumatic
Auto-Load Spot Weld, Entron EN1000 solid state
control, S/N; 1511
Weltronic Press Type, Entrol solid state control
55 Ton x 8' Chicago D & K, permanently glanded bed
and ram, motorized ram adjustment, S/N: KL-14169
55 KVA T.J. Snow Butt Welder, Entron EN1000 solid
state control, S/N: UM1001039
25 Ton x 78" Verson Mdl. 1062, 7" shut height,
S/N: 14506
50 KVA Acme Mdl. B-01-50 Butt Welder, Entron Mdl.
EN1000 solid state controls, S/N: 12215
25 Ton x 65' Chicago D & K #334 Press Brake,
bottom apron adjustment, S/N: L1238
PNEUMATIC WIRE BENDERS
12 Ga. x 6' Chicago D & K Mdl. 4A6-SP, 7' overall
bed, motorized ram adjustment, S/N: L-8760
SPOT WELDERS – INCLUDING MULTI-HEAD & BUTT
600 KVA McCreery Mdl. MPP-600-42 Press Type,
projection, 42" throat, Entron EN1000 solid state
control, S/N: 21471 [Rebuilt 1999]
[2] 400 KVA Taylor Winfield, press type, 36" throat,
Entron EN1000 solid state control, 36" throat
[Both Rebuilt 1999]
400 KVA McCreery Mdl. MPP-400-40 Press Type, 40"
throat, Entron EN1000 solid state control, S/N: 21522
[Rebuilt 1999]
[2] Penn Wire Benders, S/N: 1CSATS-697;
1CSSAATS0499-30911
Franklin Mdl. 8500 Roll Leaf Hot Stamper,
S/N: 74746/93 [1993]
Acromark Mdl. 830S.4.100.C601/8 Roll Leaf Hot
Stamper, S/N: 110571 [1998]
Acromark Mdl. 8305P-4-50SP Hot Stamper,
S/N: 110571 [1999]
Acromark Mdl. 830SP-4-100SP Hot Stamper,
S/N: 110572 [1999]
Acromark Mdl. K-F Hot Stamper, S/N: 113736 [2000]
Franklin Mdl. 8300 Roll Leaf Hot Stamper,
S/N: 78747/93 [1993]
Acromark Mdl. 830-50SP Hot Stamper,
S/N: 108315 [1996]
ROTARY WELDING TABLES
[2] Acromark Mdl. 830-100SP Hot Stamper,
S/N: 110799; 111581 [1997]
[3] Custom Built 19' Dia., 6-position, motor driven,
A-B Panelview 300 Interface
United Silicon Mdl. US120E Hot Stamper,
S/N: 120E-36C0298H [1998]
[2] Bee Co. Mdl. 100 Hot Stamp Machine, S/N: 33
MIG AND TIG WELDERS — NEW 1995 – 2001
[2] Miller Mdl. CP-302 CV-DC Welder, Series 60, wire feeder
[5] Miller Mdl. CP-302 CV-DC Welder, Series 70, wire feeder
[9] Miller Mdl. CP-302 CV-DC Welder, S-22A wire feeder
400 KVA Progressive Mdl. 615BS-1, 32" throat, 440
primary volt, air operated, foot pedal
Miller Mdl. CP-300
250 KVA Taylor Winfield, press type, 42" throat,
Entron EN1000 solid state control, S/N: 91A5
Miller “Trail Blazer 251” 8000 Watt Welder Generator
250 KVA Progressive Mdl. 244ES3-24 Press Type,
30" throat, Entron EN1000 solid state control
HOT STAMPERS
Miller Econotig CC.AC/DC Welder
Lincoln Electric Precision TIG-275 Welder, mico start
150 KVA Acme Mdl. PT2P-30-150, press type, 30"
throat, Entron solid state control, S/N: 7089 [Rebuilt]
100 KVA Acme Mdl. PT1P-24-100, press type, 24"
throat, Entron solid state control, S/N: 11000
75 KVA Acme Mdl. PTP1-24-75, press type, 24"
throat, Entron solid state control
Janda Mdl. M36-4-150-1C, 4-head, 36" long, [2]
Roman 150 KVA transformers, pneumatic, Entron solid
state controls, S/N: M-2140 [1992]
Janda Mdl. SP6HD, 6-head, [3] 150 KVA transformers,
72" x 84", jig table, Entron EN100 solid state control,
S/N: M-1784 [1992]
Partial View of Welders
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
http:www.kosterindustries.com • e-mail: [email protected]
5
COOLING TOWERS & CHILLERS
[2] Thermal Care Mdl. FC730 205 Ton Cooling
Towers, 615 gpm rating, 10' x 8' x 8' holding tank,
30 HP centrifugal pumps [mid 1990s]
2002
Thermal Care Mdl. PT2100 Water Make-Up Tank,
8' x 6' x 6', 15 HP & 25 HP centrifugal pumps,
S/N: 27110019906
Carrier Mdl. 30HS120-F600 80-Ton Chiller,
S/N: 1494J07293 [1994]
Capital Temptrol Mdl. RCHCM150 120 Ton Chiller,
400 PSIF, S/N: 08-00-57404-001-001 [2000]
York Mdl. 4CAL0104EC46XCASBT Water Chiller,
[3] exhaust fans [new approx. 2006]
Carrier 30GT-025-610 Liquid Chiller, 2-fan, R-22,
S/N: 0599F96392
POWDER COAT BOOTHS – NEW 2002
[2] 2002 ITW Gema “Vortech”, 36" x 60" opening,
[2] 30" x 42" manual touch-up stations, [2] 8-gun
oscillating PG-2A electrostatic powder, Vortech J
Technology multi-recovery, auto damper
DRY OFF OVENS
[2] Amiberica Mdl. SF-40 60" x 92" x 80", 1000 degree
and 48' x 34' x 10' high, with dual pass conveyor, 400
degree, exhaust, etc. (both new approximately 2000)
WASTE WATER TREATMENT
[2] 10,000 gal. fiberglass tanks, assorted pumps &
diaphragms, [2] 4500 gal. reaction tanks, sand filter with
stainless steel tank, holding tanks, assorted agitators,
Allen Bradley control & monitoring system
1 OF 2
Pac-Press Mdl. PAC800G16A 33-Plate Filter Press,
100-psi, 16 cu. Ft., S/N: 302 (1992)
2002 ITW Gema “Vortech” Automatic Powder Coat Booths
CHEMICAL COATING LINE
[2] Clausing Kondia Mdl. FV-1 3HP Vertical Mill, with
9" x 48" table with power feed, Acu-Rite digital readout,
60-4000 RPM, S/N: Y-516; X-6
Complete material handling system, assorted soak
tanks, rinse tanks, acid solution tanks, 20,000 gal.
plating solution tank, blowers, etc.
PHOSPHATE COATING LINE
Material handling system, assorted rinse tanks, acid
tanks & soak tanks, 2000-amp rectifier (2002), 15,000
gal. phosphate tank, Babco material handling system,
agitation blower, plc control, etc.
SHOPPING CART ASSEMBLY LINE
12" x 50’ Long New London Motorized Rubber
Belt Conveyor, impact wrenches, Chicago
pneumatic compression riveters, 36" wide x 150' long
(approximately) metal slat motorized conveyor, pop
riveters, mezzanine, ramps, etc.
TOOLROOM
10" x 24" Brown & Sharpe “1024 Micromaster”
Surface Grinder, with electromagnetic chuck,
S/N: 523-1024-371 (1986)
Seiki Mdl. 3VH Vertical Mill, 3HP, with power feed
table, Futaba Mdl. CJ2004 pulscale digital readout,
S/N: 4038
MISCELLANEOUS MACHINERY
2005 Fisher Mdl. XDL-B-XYZ-PT8 X-Ray Machine,
S/N: SN080004782
Seiki Mdl. 2VH 3HP Vertical Mill, 10" x 50" table,
power feed, Acu-Rite X/Y digital readout, S/N: 4098
(1986)
Ridgid Mdl. 535 Pipe Threader, S/N: EBE030560803
[2003]
DoAll Mdl. CPM-200S Vertical Mill, with 9" x 42" hand
feed table, R-8 spindle, pulley drive, S/N: 0910259
Lantech “Lan-Wrapper” Automatic Pallet Wrapper,
approximately 6' high, 48" x 48" turntable, S/N: V-2530
DoAll Vertical Mill, with 8-spindle speeds, 80-2720
RPM, Trak “102” digital readout, 9" x 42" table,
S/N: 82-0910290
[8] Assorted Power Nibblers, 20" throat
16" x 60" Tos Mdl. SN40 Lathe, with inch/mm
threading, S/N: 440100901126
29" Wide EMI Motorized Cleated Conveyor
Hardinge DSM Turret Lathe, with vari-speed,
6-position turret, S/N: N/A
11" x 8' Long EMI Motorized DC Rubber Belt
Conveyor
40" Wide EMI Rubber Belt Motorized Conveyor
Genie Mdl. SLA-10 Portable Lift
4' Arm x 9" Column Carlton Radial Arm Drill, with
t-slotted base, power elevation, 26" x 26" x 18"
box table
Assorted Quantities 42" x 96" 2-Tier Adjustable Pallet
Racking, with wire decking
20" Jet Mdl. VBSS1220A Vertical Bandsaw, with 26" x
28" table, grinder & welder attachment, S/N: X50127
14" Milwaukee Mdl. 6175 Abrasive Saw
10" x 18" Tannewitz Horizontal Bandsaw, 2HP,
S/N: 2125
Also Available: drills, taps, reamers, nuts & bolts, vises,
welding tables, tool cabinets & boxes, etc.
5000# Digital Platform Scales, 48" x 48" above ground
15" Wilton Mdl. 2500 Drill Press
Custom Built H-Frame Hydraulic Press, 10HP, 70"
between uprights, 30" x 70" table
4-Station Indexing Weld Station
Approximately [20] Stackable Type Cone-Bottom
Hoppers
With BIDSPOTTER.COM you can bid
on items in auctions from anywhere in the world!
Approximately 96’ of 5-Tier Cantilever Racking for
Tube Stock
To register to bid in this Koster Industries Inc.
Maguire Clear-Vu Loader
auction, please visit us at www.bidspotter.com
Gammflux 12-Zone Heater Control & Assorted DME
Mdl. MFP8G & MFP12G Heat Controls
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
http:www.kosterindustries.com • e-mail: [email protected]
6
MATERIAL & WORK-IN-PROCESS
Assorted coils of unused wire, assorted tube steel (unused), large quantity of work-in-process shopping
cart frames & baskets, also finished product including large quantity of various style shopping carts & hand
baskets
View of Hot Stampers
690
View of Assorted Style Carts
MANUFACTURING OPPORTUNITY!!!! MOLDS FOR SALE!!!!
Over 50 molds and related fixtures for the production of shopping carts, hand baskets and material
handling carts for such customers as Walmart, Lowe’s, Target, Macy’s, JCPenney, etc.
Note: Molds will be offered subject to prior sale. If not sold, they will be offered at auction day of sale.
View of Thermal Care Cooling Towers
For further information on product lines and molds, please contact:
Gulf Atlantic Capital Corporation
2701 N. Rocky Pointe Drive, Suite 360
Tampa, FL 33607
MISCELLANEOUS & PLANT ITEMS
Miscellaneous Shop & Crib Items: metal scrap
bins, hand tools, power tools, pneumatic tools, postmounted fans, Roura dumping hoppers, banding carts,
cantilever tube racking, metal tube & wire benders,
shop carts, miscellaneous conveyor sections, wire
transfer bins, weld exhaust extractors, pedestal fans,
Miller Mdl. CP-302 welders, miscellaneous tooling,
ladders, Denison c-frame hydraulic press, plating line
maintenance equipment, rail-riding dip tanks, RI dual
conveyor system, disc sanders, pedestal grinders, drum
crusher, air diaphragm pumps, work benches, bearing
pullers, mig welding parts, [2] Greenlee boxes, switches,
fuses, quantity of hi-hat stands, joboxes, CM electric
hoists, Gorbel hoists, floor polishers, cafeteria tables,
Scottsman Mdl. BH900S-C ice maker, pallet jacks,
assorted gravity feed racking, 36" x 36" granite surface
plate, [10] 28" x 71" picnic tables, Nu-Era tool cabinets,
fasteners, casters, work benches, large quantity of
electrical replacement parts, couplings, relays, Enerpac
hydraulic torque wrenches, hydraulic cylinders, bunting
magnetic units, Mobile Crimp 4.20 crimper, etc.
Contacts: Mike Shirley – 813.281.5001 or [email protected]
Mike Verdisco – 813.281.5002 or [email protected]
MISCELLANEOUS OFFICE ITEMS
Desks, chairs, file cabinets, tables, bookcases,
rolling secretarial chair, partitions, reception area
furniture, lateral file cabinets, cubicle dividers,
conference room furniture, executive office furniture,
board room furniture, break room furniture, pc work
stations, printers, network communications equipment,
facsimile machines, scanners, phone system, UPS
battery backups, HP Designjet 450C plotter, laser
printers, couch, etc.
View of Molds & Product
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
http:www.kosterindustries.com • e-mail: [email protected]
7
city
Large Capa & Wire
Molder
Injection Fabricator
and Tube
BY ORDER OF SECURED PARTY
1301 Battery Brooke Parkway, Richmond, Virginia 23237
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 13%
Buyer’s Premium. A minimum deposit of 25% on all lots purchased is required at the
time of sale in cash, certified or cashier’s check. Company or personal checks will
be accepted only if accompanied by a letter from the payor’s bank guaranteeing
unqualified payment to Koster Industries Inc. All checks must be made payable to
the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster
Industries Inc. on balances due will be accepted with prior arrangement. No lot may
be removed until complete settlement is made.
1994
2000 Ton Cincinnati Milacron Mdl. VL2000-362
Injection Molder
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
First-Class Mail
U.S. Postage
PAID
Minneapolis, MN
Permit #3723
AXP/9020143
AUCTION SALE
acity
Large Cap & Wire
ld
Mo er
Injection Fabricator
b
and Tu e
BY ORDER OF SECURED PARTY
1301 Battery Brooke Parkway, Richmond, Virginia 23237
Manufactu
rer of
Shopping
Cart
Baskets & s, Hand
Material
Handling
Carts
AUCTION DATE: THURSDAY, MARCH 5TH, STARTING AT 10:30 A.M.
INSPECTION DATE: WEDNESDAY, MARCH 4TH FROM 8:00 A.M. TO 4:00 P.M. AND MORNING OF SALE
HOTELS:
HOLIDAY INN . . . . . . . . . . . . . . . . . . . . . . . . . . . 800.345.8082
COMFORT INN . . . . . . . . . . . . . . . . . . . . . . . . . . 804.751.0000
CLARION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 804.226.1800
DIRECTIONS:
1977
¼" Nilson Mdl. S-432 Four-Slide
100 Ton Rousselle Straight
Side Press
From Richmond, Virginia, Airport: Start on RICHARD E. BYRD
TERMINAL DR. going toward S. AIRPORT DR. Go 0.17 miles.
Make a Sharp LEFT Turn on S. AIRPORT DR. toward TERMINAL
and PARKING. Go 0.24 miles. Turn RIGHT on EUBANK RD.
toward SHUTTLE LOT A and B. Go 0.75 miles. Turn LEFT on
S. LABURNUM AVE. Go 4.32 miles. Take ramp onto VA-895
W. toward I-95/VA-150 (Toll applies). Go 2.82 miles. Take the
PETERSBURG exit onto I-95 S. (Toll applies). Go 3.18 miles.
Take exit #64/WILLIS RD. Go 0.18 miles. Turn LEFT on WILLIS
RD. (VA-613). Go 0.49 miles. Turn RIGHT on COACH RD. Go
0.66 miles. Turn LEFT on BATTERY BROOKE PARKWAY.

Similar documents

Lotus Approach/CATALOGUE2009.APR

Lotus Approach/CATALOGUE2009.APR ELECTROLUX VACUUM CLEANER SP747, SP748, SP757, SP767, Z90, Z94, Z100, Z305, Z310, Z312

More information

HEIM Rousselle PDF Set - Your Equipment Source, Inc

HEIM Rousselle PDF Set - Your Equipment Source, Inc Rousselle Single Point Gap Frame (Steel Fabricated) Standard Features • Steel Fabricated • Combination Air Clutch and Brake • Crankshaft Motion • Ball Type Adjustment Screw with Bronze Seat • Multi...

More information