DC Components

Transcription

DC Components

R
®
ELECTROTECHNOLOGY
DC Components
R
®
DC Components 2013
Contents
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DC - Distribution and Protection Components
CH 10 gPV Fuse Selection / NH gPV Fuse Selection
CH 10gPV - Fuse-Links
CH 10x85 gPV - Fuse-Links
CH 10x85 PV - Fuse-Links
CH 10 PV - Fuse-Links
VLC 10 DC - Fuse Disconnector
PCF 10 DC - Fuse Disconnector
Section Rail / Fuseholder for 10 x 38 mm Fuse Links
NH DC 750V - Fuse-Links
Fuse Base U1-3 DC 1200V
Fuse Base U1-1/GZ/PV
Fuse Disconnector TL1-1/9/1000V/PV
Fuse Disconnector TL1,3-1/9/1200V
Nh Strip-Fuseways L2,3-2/1200V
Steel-Frame Clamp KM2G-F / NH Handle for Fuse Link DC 1100V
Mertronic - Lightning and Surge Arresters / Mertronic PV Selection
Mertronic B-PV 550/12,5 (10/350) / Mertronic B-PV 1000/12,5 (10/350)
Mertronic C-PV for Photovoltaic System on a Building without External Lightning Protection
Mertronic C - PV / Mertronic C-PV 100, 550/20 / Mertronic C-PV 1000/20
Technical Data
PV Switch Disconnector for Photovoltaic / Switch Disconnectors and Load
IP65 Wall Mounted Distribution Boards ECH
Technical Data / Enclosure Designation
12 Modules PV Distribution Boards 1,2 Inputs / Type Designation / Electric Scheme
PV 500 / B / 25 / 2 / PV 1000 / C / 25 / 2
24 Modules PV Distribution Boards (3,4,5,6 Inputs)
PV1000/B/25/6 / PV500/C/25/6
Protection of PV Modules on REVERSE Current by CH gPV Fuse Link
Protection of the Wiring Between ARRAYS from Short-Circuit
Protection from “AC REVERSE Current” (Transformerless Inverter)
Notes
AC - Distribution and Protection Components
ASTI - Miniature Circuit Breakers and Residual Current Devices
Residual Current Circuit Breakers RCCBs EFI Type A
EVE - Modular Devices / MERSWITCH - Switch Disconnectors
Mertronic - Motor Contactors and MERBREAK - MCCBs
Mertronic - Surge Arresters / NV/NH - Low Voltage Knife Blade Fuses and Disconnectors
KVS - Free-Standing Cable Distribution Cabinets
Enclosures
Design on Customer’s Request
Meter Distribution Cabinet / AC Collector
Overcurrent and Overvoltage Protection for Wind Power Generation
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Contents
Introduction
Photovoltaic systems are composed by photovoltaic panels,
cables, fuses, switches, overvoltage arresters and power inverter.
Photovoltaic panels utilize the power of sunlight to converters
photons to DC current.
Electricity generated by solar panels is then fed into a power
inverter that converts DC current to AC current. gPV fuse has
been developed to protect cable and panel against «reverse»
over current.
MERTRONIC B, C-PV series of over voltage surge protective devices
has been developed to protect against direct and indirect lightning
discharges and is intended to protect photovoltaic systems.
The circuit topology consists of two varistors stages each
protected by a thermal disconnection device.
Over Current Protection
• PV module protection from »DC REVERSE« current on DC side
Array with three or more strings of panels:
PV systems that have three or more strings connected in parallel
need to have each string protected by fuses.
Systems that have less than three strings will not generate enough fault current to damage the conductors/solar panels.
Normally there are two gPV fuses connected on each string (+ and - pole) that protect conductors/solar panels from
damage and eliminate any safety hazards.
Fuses isolate the faulted string. The rest of PV system can continue to generate electricity.
• PV module protection from »AC REVERSE« current caused by defective inverter
If an inverter becomes defective (transformer less …), AC reverse current can feed into DC strings and destroy PV
modules.
2 | www.merkur-hamburg.de
CH 10 gPV Fuse Selection / NH gPV Fuse Selection
CH 10 gPV Fuse Selection
Define panel data:
- Isc (string)
- Uoc (STC) - open circuit
voltage at standard
conditions
- number of panels
- number of strings
Does
module
number in
protected string
exceed TWO?
NO
No gPV string fusing
required
YES
gPV string fuse In!
1, 4 x Isc (panel)
gPV string fuse Un!
1, 2 x Uoc (STC)
(panel) x number of
panels
Apply gPV string fuse
to + and - pole of string
NH gPV Fuse Selection
Define panel data:
-Isc (panel)
-Uoc (STC) - open circuit
voltage at standard
conditions
-number of panels
-number of strings
NH PV fuse In ≥ 1,5 x Isc
(panel) x number of strings
NH PV fuse Un ≥ 1,2 x Uoc
(STC)
(panel) x number of panels
Apply NH PV fuse
to + and - pole of string
www.merkur-hamburg.de | 3
General Characteristics
Rated voltage
Breaking capacity
Standards
Application
UL file: E347771
1000V d.c. L/R=2ms
30kA d.c.
IEC 60269-6 ed 1.0 (2010-9)
For protection of photovoltaic modules
CH 10 gPV
Size
In(A)
Code No. «standard contacts»
Code No. «type
SU contacts»
10x38
1
2
3
3.5
4
5
6
7
8
10
12
13
14
15
16
20
25*
113736249
113736212
113736211
113736246
113736213
113736222
113736214
113736221
113736215
113736216
113736217
113736248
113736247
113736223
113736218
113736219
113736210
113736239
113736226
113736224
113736238
113736227
113736235
113736228
113736225
113736229
113736229
113736231
113736239
113736237
113736236
113736232
113736233
113736234
Pre-arcing
Joule integral (A²s)
L/R=2ms
0.8
1.3
2.6
3
4
7.4
10
13
17
21
28
30
31
33
35
50
75
Operating
Joule integral (A²s)
L/R=2ms
2.5
3.5
7.5
9.5
13
23
45
57
62
88
110
160
180
260
270
430
620
Power
Power
dissipation
Weight Packaging
dissipation
(0,7xln) Pd
(g)
(pcs)
(ln) Pd(W)
(W)
0.4
1
0.52
1.25
0.55
1.3
0.48
1.16
0.52
1.25
0.63
1.49
0.73
1.65
0.79
1.92
10/500
10/12
0.84
2
SU:10/380
0.97
2.3
0.95
2.2
1
2.3
1.1
2.5
1
2.4
1.1
2.6
1.3
3
1.6
4
Standard Contacts
*900V d.c.
Type SU Contacts
Rated voltage
Breaking capacity
Standards
Application
UL file: E347771
1500V d.c. L/R=2ms
30kA d.c.
IEC 60269-6 ed 1.0 (2010-9)
For protection of photovoltaic modules
CH 10x85 gPV
Size
Standard Contacts
In(A)
2
4
5
6
8
10x85
10
12
15
16
20*
25*
*1200V d.c.
Code No.
«standard
contacts»
Code No.
«type SU
contacts»
113736311
113736312
113736340
113736313
113736314
113736315
113736316
113736351
113736317
113736318
113736319
113736321
113736322
113736310
113736323
113736324
113736325
113736326
113736320
113736327
113736328
113736329
Pre-arcing
Joule
integral
(A²s) L/
R=1ms
1.6
7
11
21
22
53
41
49
141
212
273
Operating
Joule
integral
(A²s) L/
R=1ms
2.2
11
13
37
80
119
82
240
230
408
570
Power
Power
dissipation
Weight Packaging
dissipation
(0,7xln) Pd
(g)
(pcs)
(ln) Pd(W)
(W)
1.13
1.19
1.25
1.33
1.6
1.63
1.31
1.4
1.57
1.68
2.17
2.72
2.96
3.1
3.2
4.19
4.2
3.47
3.55
3.65
3.85
5
15/17
10/210
SU:10/160
Type SU Contacts
Rated voltage
Breaking capacity
Standards
Characteristic
1200V d.c. L/R=2ms
30kA d.c.
IEC 60269-4
gR
CH 10x85 PV
Size
In(A)
Code No.
«standard
contacts»
10x85
2
4
6
8
10
12
16
20
25
113736331
113736332
113736333
113736334
113736335
113736336
113736337
113736338
113736339
Code No.
«type SU
contacts»
113736341
113736342
113736343
113736344
113736345
113736346
113736347
113736348
113736349
Pre-arcing
Joule
integral
(A²s) L/
R=1ms
1.6
12.5
21
22
53
41
141
212
273
Operating
Joule
integral
(A²s) L/
R=1ms
1.7
13
28
61
91
63
177
314
438
Power
Power
dissipation
Weight Packaging
dissipation
(0,7xln) Pd
(g)
(pcs)
(ln) Pd(W)
(W)
1.13
1.19
1.33
1.60
1.63
1.31
1.57
1.68
2.17
2.74
2.96
3.20
4.19
4.20
3.47
3.65
3.85
5.00
15/17
10/210
SU:10/160
Standard Contacts
Type SU Contacts
Rated voltage
Breaking capacity
Standards
Characteristic
700V a.c./d.c. L/R=2ms
30kA a.c./d.c.
IEC 60269-4
gR
CH 10 PV
Size
In(A)
Code No.
«standard
contacts»
10x38
2
4
6
8
10
12
16
20
25
113736128
113736129
113736120
113736131
113736132
113736133
113736134
113736135
113736136
Standard Contacts
Code No.
«type SU
contacts»
113736411
113736412
113736413
113736414
113736415
113736416
113736417
113736418
113736419
Pre-arcing
Joule
integral
(A²s) L/
R=2ms
1.2
7.6
14
30
20
48
97
164
246
Operating
Joule
integral
(A²s) L/
R=2ms
1.41
28
63
98
73
122
182
301
434
Power
Power
dissipation
Weight Packaging
dissipation
(0,7xln) Pd
(g)
(pcs)
(ln) Pd(W)
(W)
0.44
0.55
0.73
0.70
0.98
0.82
1.06
1.27
1.61
1.10
1.30
1.70
1.62
2.44
1.85
2.61
3.00
4.00
10/12
10/500
SU:10/380
Standard Contacts
CH 10 PV I/t characteristics
General Characteristics (UL pending)
Rated voltage
900V a.c./d.c. L/R=2ms
Breaking capacity
30kA a.c./d.c.
Standards
IEC 60269-4
Characteristic
gR
CH 10 PV
Size
In(A)
Code No.
«standard
contacts»
10x38
2
4
6
8
10
12
16
20
25
113736138
113736139
113736130
113736141
113736142
113736143
113736144
113736145
113736146
Code No.
«type SU
contacts»
113736421
113736422
113736423
113736424
113736425
113736426
113736427
113736428
113736429
Pre-arcing
Joule
integral
(A²s) L/
R=2ms
1.2
7.6
14
30
20
48
97
164
246
Operating
Joule
integral
(A²s) L/
R=2ms
1.89
37
81
126
94
157
234
387
558
Power
Power
dissipation
dissipation
(0,7xln) Pd
(ln) Pd(W)
(W)
0.44
0.55
0.73
0.70
0.98
0.82
1.06
1.27
1.61
1.10
1.30
1.70
1.62
2.44
1.85
2.61
3.00
4.00
Weight (g)
Packaging
(pcs)
10/12
10/500
SU:10/380
Standard Contacts
Standard Contacts
Rated voltage
Rated current
Max. fuse link power dissipation
Cross section of connecting wir
Pole build-in width
Mouting on the rail
Utilization category
Standards Fuse-links
Standards - Fuse disconnector
UL file: E212627
1000V d.c.
max. 25A
3W
1,5 mm²-25mm²
18 mm
EN 60715
DC-20B
IEC 60269-2:2006 UL 284-4
IEC 60947-1 Ed. 4.0 EN 60947-1:1999+A1+A2 IEC
60947-3 Ed. 2.1 EN 60947-3:1999+A1:2001
VLC 10 DC
Number of poles
1P
2P
1P
2P
Ue/Ui [V]
1000
1000
1000
1000
Imax.[A]
25
25
25
25
Code No.
113652113
113654113
113652213
113654213
Indicator
LED
LED
Weight [g]
65
Packing [pcs]
12/108
6/54
12/108
6/54
Rated voltage
Rated current
Pole build-in width
Mouting on the rail
UL file: E212627
1000V d.c.
max. 25A
3W
1,5 mm²-25mm²
18 mm
EN 60715
DC-20B
IEC 60269-2:2006 UL 284-4
IEC 60947-1 Ed. 4.0 EN 60947-1:1999+A1+A2 IEC
60947-3 Ed. 2.1 EN 60947-3:1999+A1:2001
VLC 14 DC
Number of
poles
1P
2P
1P
2P
Ue/Ui [V]
Imax.[A]
Code No.
Indicator
Weight [g]
1000
1000
1000
1000
50
50
50
50
113672113
113674113
113672213
113674213
LED
LED
100
Packing
[pcs]
12/96
6/48
12/96
6/48
Rated voltage
Rated current
Pole build-in width
Mouting on the rail
UL file: E212627
1000V d.c.
max. 25A
3W
1,5 mm²-25mm²
18 mm
EN 60715
DC-20B
IEC 60269-2:2006 UL 284-4
IEC 60947-1 Ed. 4.0 EN 60947-1:1999+A1+A2 IEC
60947-3 Ed. 2.1 EN 60947-3:1999+A1:2001
PCF 10 DC
Number of
poles
1P
2P
1P
2P
Ue/Ui [V]
Imax.[A]
Code No.
Indicator
Weight [g]
1000
1000
1000
1000
25
25
25
25
113661312
113661314
113661322
113661324
LED
LED
58
120
58
120
Packing
[pcs]
12/108
6/54
12/108
6/54
Section Rail / Fuseholder for 10 x 38 mm Fuse Links
Section Rail
PCF 10 DC, VLC 10 DC
Type
Description
Code No.
IZS10/1F/54
IZS16/1F/54
10mm², 1 pole, 54 mod
113032212
113032222
Cross
section
(mm²)
10
16
Length (m)
Weight [g]
Packing
[pcs]
1
1
150
220
40
40
VLC 14 DC
Type
Description
Code No.
IZS16/1F/36
113032232
Cross
section
(mm²)
16
Length (m)
Weight [g]
Packing [pcs]
1
280
40
Fuseholder for 10 x 38 mm Fuse Links
Fuseholder for 10 x 38 mm Fuse Links
Code
117821446
Type
HK10383
Type
HK10383
A
12.3
B
9.8
Weight [g]
1
C
19
Packing [pcs]
250
Dimensions[mm]
D
E
2.0
2.0
F
0.75
G
11.0
H
4.0
Rated voltage
Breaking capacity
Standards
750V d.c. (L/R=15ms)
20kA d.c.
IEC 60269-6 ed 1.0 (2010-9), IEC 60269-4
Fuse-link for DC application. Applied in fuse base PK0
and PK1 DC.
Application
DC 750V
In(A)
32
40
50
63
80
100
125
160
gPV
Code No.
Code No.
Size 0
Size 1C
115221419 115221411
115221421 115221412
115221422 115221413
115221423 115221414
115221424 115221415
115221425 115221416
115221426 115221417
115221427 115221418
Size
0
1C
PV (gR)
Power
Code No.
Code No. dissipation
[W]
Size 0
Size 1C
115221611 115221621
7.6
115221613 115221623
8.8
115221614 115221624
11.0
115221615 115221625
13.5
115221616 115221626
17.0
115221617 115221627
21.0
115221618 115221628
22
115221619 115221629
22.8
A
125
135
B
35
40
C
50
55
Pre-arcing Joule
integral [I²t] (L/
R=15ms)
Operating Joule
integral [I²t] (L/
R=15ms)
Weight (g)
Packaging
(pcs)
70
135
250
520
1,050
2,580
6,300
13,060
370
650
1,000
1,790
3,000
6,140
14,090
27,220
280/0
300/1C
3/24
D
60
65
Rated voltage
Breaking capacity
Standards
Application
1000V d.c. (L/R=2ms)
20kA d.c.
IEC 60269-6 ed 1.0 (2010-9), IEC 60269-4
Fuse-link for DC application. Applied in fuse base PK0
and PK1 DC.
DC 1000V
gPV
In(A)
32
40
50
63
80
100
125
160*
*900V d.c.
PV (gR)
Code No.
Size 0
Code No.
Size 1C
Code No.
Size 0
Code No.
Size 1C
Power
dissipation
[W]
115221492
115221494
115221495
115221496
115221497
115221498
115221499
115221490
115221482
115221484
115221485
115221486
115221487
115221488
115221489
115221480
115221631
115221633
115221634
115221635
115221636
115221637
115221638
115221639
115221641
115221643
115221644
115221645
115221646
115221647
115221648
115221649
7.6
8.8
11.0
13.5
17.0
21.0
22
22.8
Size
0
1C
A
125
135
Pre-arcing Joule
integral [I²t] (L/
R=2ms)
52
96
155
290
520
1,110
2,800
5,950
B
35
40
C
50
55
Operating
Joule
integral
[I²t] (L/
R=2ms)
430
730
920
1,760
3,160
5,280
11,340
20,750
D
60
65
Weight (g)
Packaging
(pcs)
280/0
300/1C
3/24
Rated voltage
1100V d.c. (L/R=5ms)
Breaking capacity
10kA d.c.
Standards
IEC 60269-6 ed 1.0 (2010-9), IEC 60269-4
Application
Fuse-link for DC application. Applied in fuse base U1-3-1/1200/H
DC 1100V
gPV
Trip
indicator - K
(pic. 2)
115221542
115221543
115221544
115221545
115221525
115221527
115221526
115221528
115221520
115221553
115221554
/
S170 screw
contact
(pic. 3)
115221546
115221547
115221548
115221549
115221531
115221540
115221532
115221534
115221535
115221555
115221556
115221558
PV (gR)
Standard
Trip
indicator indicator - K
(pic 1)
(pic. 2)
115221651 115221661
115221652 115221662
115221653 115221663
115221654 115221664
115221655 115221665
115221696 115221697
115221656 115221666
115221657 115221667
115221658 115221668
115221659 115221669
115221650 115221660
/
/
Power
dissipation
(0,7xIn) Pd
[W]
Power
dissipation
[W]
Pre-arcing
Joule
integral [I²t]
(L/R=5ms)
Operating
Joule
integral [I²t]
(L/R=5ms)
6.2
7.0
8.2
9.6
14.6
13.9
17.8
17.9
25.2
28.2
28.8
37.7
15.0
17.0
20.0
23.0
35.0
32.6
42
46
54.0
60.5
67.0
80.8
2,720
4,000
6,500
11,000
19,400
42,600
40,000
85,260
166,800
175,000
235,000
493,000
3,520
5,500
9,000
15,000
28,640
83,400
60,000
117,400
221,900
260,000
345,000
584,000
Weight (g)
Packaging
(pcs)
750
1/16
1050
1/15
1360
1/22
2
#
'
Picture 1
0
"
Standard
Size
In(A)
indicator
(pic. 1)
63
115221537
80
115221538
100
115221539
1XL
125
115221540
160
115221521
200
115221522
200
115221541
2XL
250
115221524
315
115221536
350
115221551
3L
400
115221552
500* 115221557
*1000V d.c., L/R=2ms
%
!
Picture 2
Picture 3
Size
1XL
2XL
3L
A
194
209
209
B
24
30
37
C
40
48
60
Dimensions[mm]
E
G
P
46
61.5
20.5
54
71
27.3
64
82
35.6
R
13.7
16.2
17.0
M
50
59
70
O
52
61
74
104
6
4
80A 125A
63A
100A 160A
103
NH1
200
A
A
200
6
4
315A
250A 350A 500A
400A
NH2
Pre-arcing time (s) tv/s
2
2
102
6
4
2
101
6
4
2
100
6
4
2
10-1
6
4
2
10-2
6
102
2
4
6
103
2
Prospective current (A) Ip/A
4
6
gPV, PV(gR) 750V, 1000V t-I Characteristics
gPV, PV(gR) 1100V t-I Characteristics
Type
Rated voltage
Rated current
fuse links size
Conv. Free air thermal current with fuse-links
Conv. Free air thermal current with solid links
Max. permis. Power dissipation per fuse-link
Screw
Cable lug (DIN46235)
Flat terminal
Flat termination
Cable terminal
Rated torque
Clamping cross-section
Terminal
Rated torque
Degree of protection - Front side, device fitted
Ambient temperature*
Rated operating mode
Actuation
Operating
Mounting position
conditions
Altitude
Pollution degree
Overvoltage category
Insulation class
Standards
U1-1/1200
U2-1/1200
U3-1/1200
1200V d.c.
250A
1XL
200A
325A
35W
M10
25-150mm²
30x10 mmx-mm
30-35Nm
KM2G
IP 00
400A
2XL
315A
520A
46W
M10
25-240mm²
30x10 mmx-mm
30-35Nm
25-300mm²
32Nm
KM2G
630A
3L
630A
1000A
70W
M10
25-300mm²
40x10 mmx-mm
30-35Nm
25-300mm²
32Nm
IP 00
-25°C to +55°C
Continuous operation
Vertical, horizontal
up to 2000 m
3
III
C-VDE 0110
EN 60269, IEC 60269, DIN VDE 0636, DIN 43620, DIN 43623
IP 00
A
C
B
K
H
10.5
30
Type
In(A)
Code No.
U1-232/1200/H
U1-1/1200/H
U1-1/1200/H/K
U2-1/1200/H
U2-1/1200/H/K
U3-1/1200
U3-1/1200/K
250
250
250
400
400
630
630
115233145
115233138
115233139
115233130
115233141
115233142
115233143
A
56
56
64
68
B
232
257
257
270
Type
I
U1-232/1200/H
U1-1/1200/H
U2-1/1200/H
U3-1/1200
E
D
F G
C
140
140
140
140
Max.
Connection
(mm²)
150
150
150
240
240
300
300
D
25
25
30
40
Mechanical
fuse monitor
Weight (g)
without
without
with
without
with
without
with
500
550
600
930
1000
1200
1250
Dimensions[mm]
E
F
37
84.5
37
84.5
37
100
38
103
Packaging (pcs)
2
1
G
96
96
103
-
H
17.5
17.5
17.5
25
I
M10
M10
M10
M12
K
262
287
287
307
I
25
25
J
10
4.5
K
200
170
M
26
20
Rated voltage
1000V d.c.
Rated current
160A, 250A
Insulation class C-VDE 0110
EN 60269, IEC 60269, DIN VDE 0636, DIN 43620, DIN
Standards
43623
Type
PK1 DC
PK0 DC
In [A]
250
160
Code No.
115233136
115233136
Weight [g]
598
258
Type
PK1 DC
PK0 DC
Packing [pcs]
3/42
3/90
A
175
150
B
80
74
C
141
130
D
81
60
Dimensions[mm]
E
F
G
M10 ø 10, 5
30
M8-M8 ø 7, 5
-
H
55
33
Rated voltage
Rated current
fuse links size
Max. permis. Power dissipation per fuse-link
Screw
Cable terminal Flat terminal
Flat terminal
Flat termination
Rated torque
1000V d.c.
160A
1C, 1
160A
325A
31W
M10
25-150mm²
30x10 mmx-mm
30-35Nm
Type
In [A]
Code No.
U1-1/GZ/PV
160
115233146
Max.
Connection
(mm²)
150
Weight [g] Packing [pcs]
387
1
General characteristics
Number of poles
Rated voltage
Rated current
Fuse-links
Size to DIN 43620
Max. rated current (gL/gG)
Max. permis. Power loss per fuse-link
Screw
Cable lug (DIN 46235)
Cable terminal
Flat termination
Rated torque
Type of protection - front side, device fitted
Actuation
Operating conditions
Mounting position
Altitude
Pollution degree
1
1000V d.c.
160A
160A
DC-20B
1C,1
160A
25W
M10
25-240mm²
30x10 mm
30-35Nm
IP20, IP10
-25 to +55
Cont. operation
Dependent manual actuation
up to 2000 m
3
III
Type
In [A]
Code No.
Max. Connection
(mm²)
Terminal
Weight [g]
Packing [pcs]
TL1-1/9/1000V/
PV
160
115233149
150
M10
387
1
119
69
68
117
317
230
Ø 10.,5
25
115
102,5
230
Ø 10.,5
16.5
69
30
25
Type
For NH fuse-lins/extended length/acc. To DIN VDE 0636-2
Rated voltage
Rated current
fuse link size
Rated frequency
Size
Bolt diameter
Cable lug (DIN 46235)
Flat bar
Rated torque
Operating condition
Switching cover open
Actuation
Mounting position
Altitude
Pollution degree
Cable terminal-Flat terminal
Type of protection - front side, device fitted
TL1/1200V
TL3/1200V
a1=194mm, a4=124mm a1=209mm, a4=124mm
1200V a.c. / 1000V d.c.
1200V a.c. / 1000V d.c.
250A
630A
1XL
2XL, 3L
250A
630A
325A
1000A
40-60Hz
40-60HZ
AC-20B, DC-20B
AC-20B, DC-20B
25W
70W
M10
M12
25-150mm²
25-300mm²
30x10 mm
40x10 mm
30-35Nm
30-35Nm
IP20
IP20
IP10
IP10
-25 to +55
Cont. operation
Dependent manual actuation
up to 2000 m
3
III
*35°C normal temperature, 55°C with reduced operating current
Type
In [A]
Code No.
TL1-1/9/1200V
TL3-1/9/1200V
250
630
115233147
115233148
Max. Connection
(mm²)
150
300
Terminal
Weight [g]
Packing [pcs]
M10
M12
1485
2535
1
1
Flat Terminal
M10x25
TL3-1/9/1200V
Flat Terminal
M10x25
Type
For NH fuse-links acc. to IEC 60269-6
Size
Rated voltage
Rated current
fuse links size
Rated insulation voltage
Flat terminal
Cable terminal
Clamp KM2G
Clamp KM2G-F
Type of protection- front side, device fitted - with front side strip cover
Actuation
Mounting position
Altitude
Pollution degree
*35°C normal temperature, 55°C with reduced operating current
Bolt diameter
Flat bar
Tightening torque
Tightening torque
Tightening torque
L2
L3
2 (extended
3 (extended
body)
body)
1200V d.c.
1200V d.c.
250A
400A
1XL, 2XL
3L
250A
400A
1200V d.c.
1200V d.c.
46W
75W
M12
M12
1x25-240mm²
1x25-240mm²
30x10 mm
30x10 mm
35-40Nm
35-40Nm
2525150mm²/185150mm²/185300 mm²
300 mm²
32Nm
32Nm
25-240 mm²
25-240 mm²
32 Nm
32 Nm
IP 10
IP 10
-25 to +55
Cont. Operation
Dependent manual operation
Vertical
up to 2000 m
3
III
Type
L2-2/1200/3A/HA/PV
L2-2/1200/9/KM2G-F/HA/PV
L3-2/1200/3A/HA/PV
L3-2/1200/9/KM2G-F/HA/PV
In(A)
Code No.
250
250
400
400
115233140
115233151
115233151
115233153
Max.
Connection
(mm²)
25-240
25-240
25-240
25-240
Terminal
Weight (g)
Packaging
(pcs)
2.5
3.5
7.5
9.5
3500
3650
4110
4260
1
1
1
1
Steel-Frame Clamp KM2G-F / NH Handle for Fuse Link DC 1100V
Steel-Frame Clamp KM2G-F
NH Handle for Fuse Link DC 1100V
NH Handle for Fuse Link DC 1100V
Code
Type
115052223
GP 1200
Weight (g)
400g
Packing (pcs)
1
MERTRONIC - Lightning and Surge Arresters / ETITEC PV Selection
MERTRONIC - Lightning and Surge Arresters
Overvoltage Protection Selection
MERTRONIC PV Selection
Define PV System
data: - Umax
External
Lighting
protection
exist?
Uc> 1,2xUmax
NO
Apply MERTRONIC
C PV on string and
on inverter side
YES
Apply MERTRONIC B PV
on string and inverter
side
MERTRONIC B-PV for Photovoltaic System on a Building with External Lightning Protection
PV
+
+
-
-
-
L
~
N
PE
MERTRONIC B-PV
T - Connection MERTRONIC B-PV
MERTRONIC B-PV
V - Connection MERTRONIC B-PV
MERTRONIC B-PV 550/12,5 (10/350) / MERTRONIC B-PV 1000/12,5 (10/350)
MERTRONIC B-PV series of overvoltage surge protective devices has been developed
to protect against direct and indirect lightning discharges and is intended to protect
photovoltaic systems.
The circuit topology consist of two varistors stages each protected by a thermal
disconnection device.
Category IEC/EN/VDE Class I,II/Type 1,2/B+C
Location of use: Photovoltaic systems-PV module side
Protective element: High Engery MOVs
Type
MERTRONIC B-PV 550/12,5 (10/350)
MERTRONIC B-PV 1000/12,5 (10/350)
MERTRONIC B-PV 550/12,5 (10/350) RC
MERTRONIC B-PV 1000/12,5 (10/350) RC
RC - Remote signalization contracts
Code No.
125556325
125556314
125556315
125556316
MERTRONIC B-PV 550/12,5 (10/350)
High surge discharge ratings, Ilmp =12,5kA/pole, Imax =40kA/
per pole
Internal protection and safety: Separate thermal disconnector for
each MOV block
Status indication: Mechanical flag + remote signalization
contacts (RC)
Uc [V DC]
550
1000
550
1000
Iimp [kA]
12.5
Weight (g)
300
350
310
360
Packaging (pcs)
1/3
MERTRONIC B-PV 1000/12,5 (10/350)
Technical Data
Technical Data
Type
In accordance with
Max. contionous operating voltage Uc(DC)
Nominal discharge current In(8/20)
Max. discharge current Imax (8/20)
Impulse current Iimp (10/350)
Specific energy
Charge
Protection level Up at In (8/20)
Protection level Up at Iimp (10/350)
Follow current If
Response time tA
Residual current at Uc
Thermal protection
Short-circuit withstand current
Temperature range
Terminal cross section
Terminal screw torque
Mounting EN 60715
Degree of protection
Housing material
Dimensions DIN 43880
Remote contacts - type ….RC
Contacts ratings
Packaging dimensions
MERTRONIC B-PV xxxx/12,5 (10/350)
550V
1000V
IEC-61643-1
550V
1000V
20kA
20kA
40kA
40kA
12,5kA
12,5kA
39kJ/Ω
39kJ/Ω
6,25 As
6,25 As
< 2,0kW
< 2,6kW
<1,7 kW
< 2,4 kW
No
<25 ns
< 2,5 mA
yes
25 kA / 50Hz
-40°C+80°C
35 mm² (solid)/25 mm² (stranded)
Max. 4,5 Nm
35 mm top-hat rall
IP 20
Thermoplastic, exthinguishing degree UI 94 V-0
4 TE
AC 250V /0,5A; 125V/2A
Max. 1,5 mm²
0,25 Nm
108 mm x 79 mm x 76 mm
MERTRONIC C-PV for Photovoltaic System on a Building without External Lightning Protection
PV
+
+
-
-
-
L
~
N
PE
2 X MERTRONIC C-PV 100V/550V
PV
+
+
-
-
L
~
N
PE
2 X MERTRONIC C-PV 1000V
T Connection MERTRONIC C-PV
V Connection MERTRONIC C-PV
Note: If distance between string and inverter is less than 7 m, then you need only one MERTRONIC (B,C).
MERTRONIC C - PV
MERTRONIC C-PV series of overvoltage surge protective devices has been developed
to protect against indirect discharges and is intended to protect photovoltaic
systems.
The circuit topology consist of two (three) varistors stages each protected by a thermal
disconnection device.
Category IEC/EN/VDE Class II/Type 2/C
Location of use: Branch sub-distribution
boards
Protective element: High Engery MOVs
MERTRONIC C - PV
Type
MERTRONIC C-PV 100/20
MERTRONIC C-PV 100/20 RC
MODULE MERTRONIC C-PV 100/20
RC - Remote signalization contracts
Code No.
125556317
125556318
125556319
125556310
125556321
125556322
125556332
125556333
125556334
MERTRONIC C-PV 100, 550/20
High surge discharge ratings, Iln =20kA/
pole, Imax =40kA/per pole
Internal protection and safety: Thermal
disconnector for each MOV block
Status indication: Mechanical flag +
remote signalization contacts (RC)
Uc [V DC]
100
550
1000
100
550
1000
100
550
1000
Iimp [kA]
20
Weight (g)
200
255
365
210
265
375
52
52
52
Packaging (pcs)
1/7
1/7
1/5
1/7
1/7
1/85
12/24
12/24
12/24
Technical Data
Technical Data
Type
In accordance with
Max. contionous operating voltage Uc(DC)
Nominal discharge current In(8/20)
Max. discharge current Imax (8/20)
Impulse current Iimp (10/350)
Specific energy
Charge
Protection level Up at In (8/20)
Protection level Up at Iimp (10/350)
Follow current If
Response time tA
Residual current at Uc
Thermal protection
Short-circuit withstand current
Temperature range
Mounting EN 60715
Degree of protection
Housing material
Dimensions DIN 43880
Remote contacts - type ….RC
Contacts ratings
Packaging dimensions
MERTRONIC B-PV xxxx/12,5 (10/350)
100 V
550V
1000V
IEC-61643-1
100V
550V
1000V
20kA
20kA
20kA
40kA
40kA
40kA
< 0,7 kV
< 2,1 kV
< 4,0kV
No
<25 ns
< 1,5 mA
yes
25 kA / 50Hz
-40°C+80°C
35 mm² (solid)/25 mm² (stranded)
Max. 4,5 Nm
35 mm top-hat rall
IP 20
Thermoplastic, exthinguishing degree UI 94 V-0
2 TE
2 TE
3 TE
AC 250V /0,5A; 125V/2A
Max. 1,5 mm²
0,25 Nm
108 mm x 79 mm x 76 mm
PV Switch Disconnector for Photovoltaic / Switch Disconnectors and Load
The construction of the switch ensures reliable switching up to 58A with 1000V in the category DC 21B.
The construction of the contacts and the material selection guarantee that no oxidation (small switching frequency
develops, and is thus prevented inadmissible heating-up.
The switch disconnector has 2, 4 or 4+2 contacts, by serial / paralel wirring of the contacts the contact rating will be
increased.
The switching speed at the manually operated handle does not have an effect on the switching attitude of the
contacts.
Rated voltage
Rated current
Standards
Up to 1000V d.c.
Up to 58A d.c.
IEC 60364-7-712
For interupting the DC/AC inverter from
the solar panels
Applications
PV Switch Disconnector for Photovoltaic
Code
Type
Weight (g)
115771171
115771172
115771173
115771174
115771175
115771176
115771177
LS16 SMA A2
LS25 SMA A2
LS32 SMA A2
LS16 SMA A4
LS25 SMA A4
LS32 SMA A4
LS32 SMA A4 + 2
Packing
(pcs)
2-pole
150
1
4-pole
4+2 pole
430
Switch Disconnectors and Load
DC 21B
Technical data according to IEC 60947-3, VDE0660
LS16..
LS25..
LS32..
LS32..A4+2
500V
600V
800V
1000V
2 poles in series
16A
16A
16A
9A
4 poles in series
16A
16A
16A
16A
2 poles in series
25A
25A
20A
11A
4 poles in series
25A
25A
25A
25A
2 poles in series
32A
32A
23A
25A
4 poles in series
32A
32A
32A
32A
4 Poles in series + 2 poles parallel
58A
58A
58A
58A
Because of very high breaking point capacity, switch disconnectors «LS…» are suitable for many different operating conditions
Available in 4, 8, 12, 24, 36 modules
Applications:
Watertight wall-mounted distribution boards apply in domestic and industry architecture for
mounting modular equipment for protection (IP65) against wet, dust and another dirtiness
Structure:
Enclosure is made of high thermal stability material - ASA (Acrylonitrile-Acrylic-Styrene), plastic
with good dielectrical and mechanical attributes, UV resistant (colour stability)
Advantages: Aesthetic and attractive look, easy and quick montage
Main elements:
- Bottom cover with DIN rail, PE and N bars and holes for PG cable inlets properly marked
- Top cover with seal of the door
- Transparent door made of polycarbonate (PC) with plastic lock (in standard) or metal lock with
key (in option)
Technical Data / Enclosure Designation
Technical Data:
Protection class
Isolation class
Impact kit
Nominal voltage
Temperature range
IEC compatibility
Type
Code
number
ECH-4G
112212171
ECH-8G
112212172
ECH-12PT
112212173
ECH-24PT
112212174
ECH-36PT
112212175
Accessories
ECH-Lk
112212176
IP65
II
IK 07
400V AC
-25°C do +60°C
IEC-60670-24
Œ
Description
Wall mounted encl. 4 mod,
IP-65 transparent door
Wall mounted encl. 8 mod,
IP-65 transparent door
Wall mounted encl. 12
mod, IP-65 transparent
door
door
door
Number of
terminals
at PE/N
Dimensions
(HxWxD) (mm)
Weight (kg)
Packaging
(pcs.)
4/4
201x128x120
0.46
1/5
8/8
201x202x120
0.68
1/5
10/10
256x319x144
1.24
1/5
15/15
384x319x144
1.7
1/5
15/15
535x319x144
2.31
1/5
-
-
0.017
1
Lock with key for ECH
Enclosure Designation
Type
E C H ...G
...PT
Vertical door opening
( 4 or 8 modules)
Horizontal door opening
(12, 24 or 36 modules)
Modules (4, 8, 12, 24, 36)
12 Modules PV Distribution Boards 1,2 Inputs
12 Modules PV Distribution Boards 1,2 Inputs
Rated voltage
500V, 1000V d.c.
Rated current
25A, 25A d.c.
Standards
IEC 60364-7-712:2005, EN60439-1, Type test ICEM-TC Maribor
Protection class
IP54
Category(switch)
DC21B
Isolation class
Temperature range
-25°C to + 60°C
Application
As PV distribution board in photovoltaic power plant
Overvoltage
Protection
Voltage
Inputs
1
2
1
2
1
2
1
2
B
500V d.c.
C
12 modules
(318x258x142mm)
B
1000V d.c.
C
Overvoltage Protection
Type B
Type C
13a D.C.
112214112
112214125
112214116
112214117
112214110
112214121
112214124
112214125
Ground Cable
16mm²
6mm²
25a D.C.
PV500/25/B/1
PV500/25/B/2
PV500/25/C/1
PV500/25/C/2
PV1000/25/B/1
PV1000/25/B/2
PV1000/25/C/1
PV1000/25/C/2
112214128
112214129
112214252
112214253
112214256
112214257
112214250
112214141
PV500/25/B/1
PV500/25/B/2
PV500/25/C/1
PV500/25/C/2
PV1000/25/B/1
PV1000/25/B/2
PV1000/25/C/1
PV1000/25/C/2
Weight (g)
Pack.
1860
1980
1860
1980
1860
1980
1860
1980
1
Important !
CH 10 gPV fuse-links are not included in the distribution
board package and need to be ordered separately.
Type Designation
Electric Scheme:
Nominal D.C.
Voltage
Type of Overvoltage
Protection
LS xx SMA A2
4
2
3
1
MERTRONIC C
PV 1000 / 25 / B / 2
F2
PE
F1
F1
F2
INVERTER
String
6mm2
Nr. of Inputs
Nominal D.C.
Current
-
+
String
PV 500 / B / 25 / 2 / PV 1000 / C / 25 / 2
PV 500 / B / 25 / 2
1
2
3
4
5
6
7
8
9
10 11 12
3
13 14 15
16 17 18
19 20 21
22 23 24
25 26 27
5
4
28 29 30
6
INVERTER
+
MERTRONIC B-PV
PE
STRING INPUTS
STRING INPUTS
2
1
Ser. Nr. xxx
PV 1000 / C / 25 / 2
1
2
3
4
5
6
7
8
9
10 11 12
3
2
13 14 15
16 17 18
19 20 21
5
4
22 23 24
25 26 27
6
7
28 29 30
INVERTER
+
1
STRING INPUTS
PE
-
STRING INPUTS
Ser. Nr. xxx
Rated voltage
500V, 1000V d.c.
Rated current
13A, 25A d.c.
IEC 60364-7-712:2005, EN 60439-1,
Standards
Type test ICEM-TC Maribor
Protection class
IP54
Category (switch)
DC 21B
Isolation class
II ⧈
Temperature range
-25 °C to +60°C
Application
As PV distribution board in photovoltaic power plant
Important!
CH 10 gPV fuse-links are not included in the distribution board
package and need to be ordered separately.
Overvoltage
Protection
Voltage
B
500V d.c.
C
24 modules
(318x383x142mm)
B
1000V d.c.
C
Inputs
13a D.C.
3
4
5
6
3
4
5
6
3
4
5
6
3
4
5
6
112214176
112214177
112214178
112214179
112214184
112214185
112214186
112214187
112214192
112214193
112214194
112214195
112214190
112214101
112214102
112214103
25a D.C.
PV500/13/B/3
PV500/13/B/4
PV500/13/B/5
PV500/13/B/6
PV500/13/C/3
PV500/13/C/4
PV500/13/C/5
PV500/13/C/6
PV1000/13/B/3
PV1000/13/B/4
PV1000/13/B/5
PV1000/13/B/6
PV1000/13/C/3
PV1000/13/C/4
PV1000/13/C/5
PV1000/13/C/6
112214144
112214145
112214146
112214147
112214152
112214153
112214154
112214155
112214150
112214161
112214162
112214163
112214168
112214169
112214160
112214171
Pack.
2560
2680
2800
2920
2560
2680
2800
2920
2560
2680
2800
2920
2560
2680
2800
2920
1
PV500/25/B/3
PV500/25/B/4
PV500/25/B/5
PV500/25/B/6
PV500/25/C/3
PV500/25/C/4
PV500/25/C/5
PV500/25/C/6
PV1000/25/B/3
PV1000/25/B/4
PV1000/25/B/5
PV1000/25/B/6
PV1000/25/C/3
PV1000/25/C/4
PV1000/25/C/5
PV1000/25/C/6
Overvoltage Protection
Type B
Type C
Electric Scheme:
Weight (g)
Ground Cable
16mm²
6mm²
LS xx SMA A4
6
2
4
8
5
1
3
7
MERTRONIC C
-
+
F6
F5
F4
F3
F2
F1
F1
INVERTER
F3
F4
F5
PE
6mm2
String
F2
String
F6
PV1000/B/25/6 / PV500/C/25/6
PV1000/B/25/6
1
2
3
4
5
6
7
8
9
10 11 12
4
13 14 15
16 17 18
19 20 21
5
2
22 23 24
25 26 27
28 29 30
7
3
6
INVERTER
+
MERTRONIC
B-PV
PE
1
min. 9mm
STRING INPUTS
STRING INPUTS
Ser. Nr. xxx
PV500/C/25/6
1
2
3
4
5
6
7
8
9
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24
5
3
25 26 27
28 29 30
4
6
INVERTER
+
-
PE
1
2
STRING INPUTS
min. 9mm
STRING INPUTS
Ser. Nr. xxx
Protection of PV Modules on REVERSE Current by CH gPV Fuse Link
Protection of PV Modules on REVERSE Current
by CH gPV Fuse Link
CH10 gPV
(panel and cable protection)
NH DC (cable protection)
String 1
F1
array 1
(I1- I11 )….In
String 2
F2
I12
String n
se
lec
tiv
ity
I2….In
I1n
Fn
F1
String 1
array 2
F1
String 2
F2
I2
F2
Fn
String n
Fn
DC box
In
F1
array n
String 1
String 2
String n
F2
Fn
Main junction boxes
DC
AC
Protection of the Wiring Between ARRAYS from Short-Circuit
Protection of the Wiring Between ARRAYS
from Short-Circuit
F1
String 1
array 1
NH DC (cable protection)
String 2
String n
F2
I2….In
I1
Fn
F1
String 1
array 2
F1
String 2
F2
I2
DC
F2
AC
Fn
String n
Fn
DC box
In
F1
array n
String 1
String 2
String n
F2
Fn
Main junction boxes
Protection from “AC REVERSE Current” (Transformerless Inverter)
Protection from “AC REVERSE Current”
(Transformerless Inverter)
F1
String 1
String 2
F2
DC
AC
AC
String n
Fn
Notes
This part of the catalogue is only for informational purposes.
All required commercial and technical information on the
following products is available in our General Catalogue
and in Leaflet Special Purpose Fuses.
ASTI - Miniature Circuit Breakers and Residual Current Devices
ASTI - Miniature Circuit Breakers and Residual
Current Devices
Advantages of Miniature Circuit Breakers TRONIC11
➔ Sealing Cover
➔ Available in versions: 1-p, 1-p+N, 2-p, 3-p, 3-p+N with a wide
range of accessories
➔ New special version TRONIC11 remote control (RC) is a
miniature circuit breaker with remote control mechanism.
➔ Sealing Possibility
➔ “ON/OFF” mark on the
switch button
➔ Locking Device
➔ Better protection of
terminals against touching the
parts under voltage
➔ Rated current:
Characteristic B; 6 - 63 A
Characteristic C; 0,5 - 63 A
Characteristic D; 0,5 - 32 A
Characteristic K; 0,5 - 32 A
➔ New method of
mounting on the
DIN rail and simple
replacement
➔ Double connection
possibility
➔ Every product is
marked with EAN code
Application:
L1
DC
L2
RCD
AC
L3
N
EFI type A can be used in DC/AC inverters with transformers or in DC/AC
inverters for which the producer excludes the possibility of DC leakage
currents on AC side.
EFI 4
Type
S
EFI 2
Type
A
Type
A
For alternating and pulsating
direct residual current
√
√
Short-circuit capacity with
back-up fuse
√
√
√
√
Lower temperature limit of
application -25°C
√
√
√
√
VDE 0664, part 1
(up to 80 A)
√
√
Selective
(time delayed min. 40 ms)
Unwanted
tripping
Type
UT
√
√
√
Note: Tripping time according to standard IEC 61008
EFI-4 UT and EFI-4 S
RCCB EFI-4 UT is surge current resistant type UT (unwanted tripping)
up to 5kA 8/20μs. RCCB type A (Un 230/400V AC, 230V AC) recognizes
sinusoidal alternating and pulsating direct residual currents (according to
IEC/ EN 61008).
RCCB EFI-4 S (selective) time delayed to exclude unwanted tripping
because of possible occurance of short time leakage currents.
EVE - Modular Devices / MERSWITCH - Switch Disconnectors
EVE - Modular Devices
Utility grid monitoring relays HRN-54 and HRN-54N serves
to monitor voltage, phase failure and phase sequence
and perform anti-islanding protection together with ETI
multifunction time relays CRM-91H and CRM-93H.
• HRN-54
• HRN-54N
• CRM-91H
• CRM-93H
Application:
Anti-islanding protection for photovoltaic systems.
Build-in switch is used as a main switch in distribution boxes in houses
or as a switch for individual electric circuits. With a build-in switch we can
completely replace the cam switch. Build-in switch can be sealed either
in ON or OFF position.
Available in 1-, 2-, 3- and 4-pole versions.
MERSWITCH - Switch Disconnectors
MERSWITCH Switch diconnectors series LAS and built-in switches series
SV serves as control switches, load break switches and disconnecting
devices in AC distribution/protection cabinets.
• LAS16 up to LAS125 (3,4-pole, from 16 to 125A)
• SV1100 up to SV4100 (1, 2, 3, and 4-pole; 100A)
MERTRONIC - Motor Contactors and MERBREAK - MCCBs
MERTRONIC - Motor Contactors and MERBREAK - MCCBs
MERTRONIC power contactors are used as separation device actuated on antiislanding protection signal between photovoltaic inverter and AC utility grid.
For the same purpose MERBREAK moulded case circuit breakers series EB2
assembled with motor operators enabling remote controlled operations can
be used. EB2R moulded case circuit breakers with integrated residual current
protection provides combined protection against overloads, short-circuits and
residual currents.
• CEM 9 up to CEM300 (AC3 9 up to 300A)
• MERBREAK EB2 (from 20 up to 630A)
• MERBREAK EB2R (from 20 up to 250A)
Low Voltage Moulded Case Circuit Breakers with
Residual Current Protection EB2R
Breaking capacities as
on MCCBs
Adjustable residual current tripping
thresholds between 30mA and 3A.
Adjustable time delay for residual
current protection between 60ms and
700ms including INST (instantaneous)
and NT (No Trip).
Voltage Presence LED Indicator and
Trip Indicator (the yellow button pops
up to indicate tripping due to residual
current)
Test Button (to test the residual current
detection and tripping system)
Type A: Tripping is ensured for residual
sinusoidal AC in the presence of residual
pulsating DC.
Dielectric test device plug (to allow dielectric
testing with the EB2R closed – ON)
Adjustable overload protection Ir can be set
between 63% and 100% of In
MERTRONIC - Surge Arresters / NV/NH - Low Voltage Knife Blade Fuses and Disconnectors
MERTRONIC - Surge Arresters
MERTRONIC surge arresters protect photovoltaic system
AC components against direct and indirect lightning
discharges and utility grid operating overvoltages.
• MERTRONIC class T1+T2: MERTRONIC B, B-F and
MERTRONIC WENT
• MERTRONIC class T2: MERTRONIC C
NV/NH - Low Voltage Knife Blade Fuses
and Disconnectors
MERKUR offers a new generation of low-voltage
fuse-links from size NV00C up to to NV3 with
new, dual indication of fuse-link operation,
called KOMBI.
The indicator is easily visible on the top and
centre of the fuse-link, whether it is situated in
a standard fuse base or vertical fuse rail or in
fuse-switch disconnector.
Fuse links with gG characteristic with rated
voltages 400V a.c., 500V a.c., 690V a.c. and
1000V a.c are available in versions with and
without striker pin, with rated current from 2 A
to 1600 A, depending on the selected product.
We also offer:
•NV fuse-rails sizes
00, 1, 2, 3 with accessories
•NV disconnectors with fuses siyes
00, 1, 2, 3, 4a.
MERKUR can also design and produce
special non-standard fuse-links on customers’
request.
Application:
• DC collector (connecting the DC cabling for PV inverters)
• AC collector (connecting the AC cabling for PV inverters)
• AC cabinets
• DC cabinets
DC Collector
AC Collector
.
.
L1 L2 L3 N
.
.
PE
MERTRONIC
B/C
-1K1
-1S1
-1A1
A2
A1
14
13
11
12 14
LAS
-1A1
21
22 24
TRONIC
1p
-1A1
L1 L2 L3
L3
A2
L1
A1
L2
N-in
N-out
L2-in
L2-out
FREQUENCY
AND
VOLTAGE
MONITOR
TRONIC
3p
L3-in
L3-out
ENERGY
METER
-1F3
-X1
MERTRONIC
B/C
.
.
.
TO GRID
TNC
L1 L2 L3 PEN
.
NH
HVL
Enclosures
TO PV PLANT
-X0
.
-1F1
L2
CEM
5
3
1
L1
6
4
2
-1K1
L3
L1-in
L1-out
kWh
Enclosures
L3
L1
L2
Design on Customer’s Request
Design on
Customer’s Request
Meter Distribution Cabinet / AC Collector
Meter Distribution Cabinet
HVL
HVL
LAS
CEM
TRONIC 11
TRONIC 11
HRN 54
MERTRONIC C
STV-D02
-1N
EFI-2
STV-D02
-1N
STV-D02
-1N
TRONIC 6
T
EFI-2
TRONIC 6
T
EFI-2
MERTRONIC C
T
MERTRONIC C
AC Collector
TRONIC 6
MERTRONIC B
MERTRONIC C
VS
Overcurrent and Overvoltage Protection for Wind Power Generation
Overcurrent and Overvoltage Protection
for Wind Power Generation
aR / gR NH
gR
CH
gS NH
Surge
Arresters
VLC / PCF
Disconnectors
gG CH
gG NH
VV MV
Notes
www.merkur-hamburg.de
MERKUR Ueberseehandel GmbH
Headquarter Germany
Office United Arab Emirates
Office Hongkong
Mattentwiete 5
20457 Hamburg
Germany
Level 41, Emirates Towers
Sheikh Zayed Road
P.O. Box: 31 303
Dubai - U.A.E.
S +49 - 40 32 08 27 3
X +49 - 40 32 08 27 59
S +971 - 43 13 28 92
X +971 - 43 13 27 53
S +852 - 39 80 92 25
X +852 - 39 80 92 34
Afghanisatan
Lebanon
United Arab Emirates
Liberty Corporation Co.
64m Street, Herat City
Afghanistan
S +937 - 99 69 44 81
Tele Project
P.O. Box 55268
Sin el Fil
Lebanon
S +961 - 16 87 900
Gilco Trading LLC
P.O. Box 4916
Daira, Dubai
United Arab Emirates
S +971 - 43 96 15 25
Oman
Yemen
Trade Links and Services Co. LLC
P.O.Box 2901
Ruwi 112
Sultanate of Oman
S +968 - 24 70 67 75
Al Ashwal for Elecrical Trade &
Agencies
Shoub Street
Sana’a
Yemen Republic
S +967 - 12 82 43 2
Unit 1202, Level 12,
One Peking Building
1 Peking Road, Tsim Sha Tsui
Hongkong
U [email protected]
Distributors
Bahrain
Shaheen Group
P.O.Box 405
Manama
Kingdom of Bahrain
S +973 -17 81 35 35z
Cameroon
Saudi Arabia
CALICO Sarl
BP 15566
Douala
Cameroon
S +237- 22 43 80 44
Ahmed Omer Bagazy Est.
P.O. Box 16367
Jeddah 21464
Saudi Arabia
S +966 - 26 47 29 28
Ghana
Sri Lanka
Luminant Electricals
P.O. Box CT5204
Cantonment-Accra
Ghana
S +233 - 27 52 29 62 2
Rotax Limited
332 Galle Road
Colombo 04
Sri Lanka
S +94 - 11 55 74 07 0
R
®

DC Components

Transcription

Similar documents

Systemkomponenten für die Photovoltaik System components for

CIMCO CJENIK 2016 (kn) - Daljinsko Upravljanje doo

Accessories