SPEED RAIL INSTANT STRUCTURE FITTINGS

Transcription

SPEED RAIL INSTANT STRUCTURE FITTINGS
NO.3 - 90 ELBOW
0
NO. 17 - ADJUSTABLE ELBOW OR TEE
Part No.
Nom. Pipe
Size (in.)
HOL334
HOL31
HOL3114
%
1
1%
HOL1734
HOL171
HOL17114
Nom. Pipe
Size (in.)
%
1
1%
NO. 19 = ADJUSTABLE CROSS
NO.5 - TEE
Part No.
HOL534
HOL51
HOL5114
Nom. Pipe
Size (in.)
Part No.
Nom. Pipe
Size (in.)
HOL1934
HOL191
HOL19114
%
1
1%
NO. 41 - ADJUSTABLE FLANGE
NO.1- CROSS
Part No.
Nom. Pipe
Size (in.)
HOL734
HOL71
HOL7114
%
1
1%
NO. 9 - SIDE OUTLET ELBOW
Part No.
HOL4134
HOL411
HOL41114
Nom. Pipe
Size (in.)
%
1
1%
NO. 41 - FLOOR FLANGE
Part No.
Nom. Pipe
Size (in.)
HOL934
HOL91
HOL9114
%
1
1%
Part No.
HOL4734
HOL471
HOL47114
Nom. Pipe
Size (in.)
%
1
1V4
NO. 50 - WALL FLANGE
NO. 11 - SIDE OUTLET TEE
Nom. Pipe
Size (in.)
Part No.
HOL1134
HOL111
HOL11114
302
Part No.
%
1
1%
Part No.
HOL5034
HOL501
HOL50114
880 MEEKER AVE • BROOKLYN, NY 11222
Tel: 718-387-0300 • FAX: 718-387-1874
Nom. Pipe
Size (in.)
%
1
1V4
TYPE IINDUSTRIAL MECHANICS
WOOD STEP LADDERS
TYPE IINDUSTRIAL/INDUSTRIAL
ALUMINUM STEP LADDERS
These rugged industrial grade step ladders meet or exceed all ANSI
and OSHA standards. All steps are rodded for extra strength. Complete with pail rest.
Medium duty, commercial/industrial grade aluminum step ladders
conform to OSHA and ANSI standards for metal ladders. Complete
with pail rest and exclusive Tool-Tra-Top®.
250 LB.
RATING
250 LB.
RATING
Exclusive
Tool-Tra-Top')
Size
Part No.
HDL1006
HDL1008
HDL10010
HDL10012
(ft.)
6
8
Size
Part No.
10
12
(ft.)
HDL5006
HDL5008
HDL50010
Front Rail - 3!4 x 3518"
Back Rail- % x 2%"
Front Tread - 3!4 x 3%"
Back Rung - 131t6"
6
8
10
TYPE I INDUSTRIAL ElECTRICIANS
WOOD STEP LADDERS
A superior wood step ladder designed for use by electricians and
other tradesmen. Meets or exceeds all OSHA and ANSI standards.
TYPE II MEDIUM DUTY COMMERCIAL ALUMINUM
EXTENSION LADDERS
Flat step aluminum extension ladders conform to OSHA
and ANSI standards. Complete with gravity/spring
locks with spring activated nylon flipper, and 2 piece
ABS pulley, double riveted.
250 LB.
RATING
225 LB.
RATING
Size
Part No.
HDL2006
HDL2008
HDL20010
HDL20012
Front Rail - 25/32 X 31/4"
Back Rail - W8 x 2114"
Front Tread - 25/3 2 X 3%"
Back Rung -10/16"
(ft.)
6
8
10
12
Total
Length
of
Over-
Part No.
Sec.
Lap
Max.
Work
Lgth.
HDL60024
HDL60028
HDL60032
24'
28'
32'
3'
3'
3'
21'
25'
29'
1 SOUTH SECOND ST. • DEER PARK, NY 11729
Tel: 631-242-8555 • FAX: 631-667-8869
303
TYPE lA HEAVY DUTY
INDUSTRIAL RODDED
LADDERS WOOD SINGLES
These ladders aren't just the most recent
development on the market, they're also
becoming the most popular. Not only are
they very tough and resilient, they're
stronger and lighter than wood. Most importantly, they're non-conductive, so they
can be used in situations where wood and
especially aluminum might be considered dangerous. A great all-around bUy
for the money!
These rugged singles offer 1%/1 x 2314/1
hemlock rails and 131'16/1 ash rungs.
INDUSTRIAL
FIBERGLASS LADDERS
Part No.
Size
Weight
HDL17204
HDL17205
HDL17206
HDL17208
4ft.
5 ft.
6ft.
8ft.
161bs.
191bs.
231bs.
361bs.
LITTLE GIANT AREAL STEP UP IN ARTICULATING LADDERS.
These Little Giant ladders are the sturdiest, highest quality ladders of their kind, and
feature exclusive automatic locking hinges for extraordinary safety. More and more
preferred over conventional ladders because oftheir fantastic versatility, these ladders
offer the easiest, most convenient set up YOU'll find. They're really portable, too,
because their fold down height lets you carry them inside your vehicle rather than
having to strap them to the outside. Not only can these Little Giant ladders replace
several sizes of conventional stepladders, they easily convert to an extension ladder
and adjust to fit safely on stairwells and other uneven surfaces. Skid-resistant feet and
flared legs for exceptional stability. Made in the USA, completely assembled and
meets or exceeds OSHA standards.
Size
Width
Weight
8ft.
10ft.
14ft.
16 ft.
16/1
16/1
16"
16"
171bs.
211bs.
291bs.
341bs.
LITTLE GIANT TYPE 1A
EXTRA HEAVY DUTY
INDUSTRIAL ARTICULATED LADDER
300 LB. DUTY RATING
Part
No.
HDL10100
HDL10200
HDL10300
Extension
Height
Stepladder
Height
Scaffolding
Height
Storage
Height
(Ibs.)
7'to 11'
9'to 15/1
11'to 19'
3'6" to 5'5"
4'4" to 7'3/1
5'4" to 9'3"
3'
4'
5'
3'7/1
4'7"
5'7"
26
35
43
Wt.
LITTLE GIANT TYPE II MEDIUM DUTY
COMMERCIAL ARTICULATED LADDERS
225 LB. DUTY RATING
Part
No.
HDL20100
HDL20200
304
Part No.
HDL19008
HDL19010
HDL19014
HDL19016
Extension
Height
Stepladder
Height
Scaffolding
Height
Storage
Height
(Ibs.)
7' to 11'
9'to 15"
3'6" to 5'5"
4'4" to 7'3"
3'
4'
3'7"
4'7"
21
27
Tel: 718-387-0300 • FAX: 718-387-1874
Wt.
BAKER ADVANTAGE ROLLING SCAfFOLDS
FEATURES:
• Square, steel tubular frames are 29" wie and available in 6'
and 8' lengths
• Braces are designed to allow movement over lower
obstacles
• Guard rail system designed to stay at platform level at all
times
., Convenient locking system allows for quick and easy height
adjustment
., Plywood deck is reinforced with two steel supports
underneath and surrounded with a steel frame
• Compatible with other brands of utility scaffold
., Packages are provided for ordering convenience and to
meet specific job reqUirements
., Units can be stacked for increased working heights
• Platform adjusts in 4" increments. Each end can adjust
separately to be used on both level surfaces and stairs
• Can be stacked to reach a working height of 23' 6" with
outriggers installed
• 5" diameter swivel casters are rated at 190 Ibs. each and
come complete with rear brakes and snaps
Part
No.
Description
BAK10010
BAK10020
BAK10030
BAK10040
6' Base Unit with Casters
42" x 6' Upper Section less Walkboard
6' Guard Rail System with Toe Board
Set 18" Outriggers
STEEL ROLLING WAREHOUSE LADDERS
300 Lb. Rated
Louisville Ladder steel rolling warehouse ladders are considered one ofthe best on the
market. As solid as stairs, yet easy to move to any area. Rugged all steel construction.
Sturdy handrails, easy 57% degree climbing angle. "Sure Grip" tread. 7" deep steps
and 10" deep top platform provide quality features for the everyday user. Four spring
loaded casters are standard on 2-step to 5-step models. Casters retract when load is
placed on the ladder setting the ladderfirmly in place on the rubber tips. When the load
is removed, springs push down the casters enabling the ladder to move about freely.
FOB Factory.
Part
No.
~
Height To
Top Step
Base
Width
Caster
Size
Handrail/
Guardrail Height
LLSW1603
LLSW1603W03
LLSW2403
LLSW2403W03
LLSW1604
2' 41/2"
2'41/2"
2' 41/2"
2'4112"
3'2"
20"
20"
30"
30"
20"
2"
2"
2"
2"
3"
No Rails
30"/30"
No Rails
30"/30"
No Rails
LLSW2407
LLSW2408
LLSW2409
LLSW2410
LLSW2412
5'6112"
6'4"
7'1112"
7'11"
9'6"
30"
30"
30"
30"
30"
4"
4"
4"
4"
4"
30"/42"
30"/42"
30"/42"
30"/42"
30"/42"
"
Tel: 631-242-8555 • FAX: 631-667-8869
305
INGERSOLL-RAND.
LITTLE MULE CABLE PULLER
MATERIAL HANDLING
SILVER SERIES MANUAl CHAIN HOIST
LITTLE MULE cable hoists are a labor saving answer to an
almost endless variety of tough jobs. With capacities ranging from 3,4 to 2 tons these hoists can tackle tough jobs
easily and efficiently. High strength aluminum alloy, and
lightweight wire rope make these hoists portable and easy
to handle.
• All steel construction
• Reliable disc brake
• Premium grade alloy load chain
• Zinc plated hand chain
• Hardened swivel-latch hooks
• Low headroom, light weight
• Standard lifts of 10,15, and 20 feet; hand chain drop is 2 ft less
than lift
• Zinc-nickle-chrome finish-more durable and corrosion resistant
than paint
Part No.
Capacity
Metric Tons
IR00510
IR00515
IR00520
IR01010
IR01015
IR01020
IR02010
IR02015
IR02020
IR030 10
IR03020
IR05010
IR05020
'h
'h
1h
1
1
1
2
2
2
3
3
5
5
Lbs.
*Lift Length
(ft.)
No. of
Chain Falls
1100
1100
1100
2200
2200
2200
4400
4400
4400
6600
6600
11000
11000
10
15
20
10
15
20
10
15
20
10
20
10
20
1
1
1
1
1
1
2
2
2
2
2
2
2
"\;
\,
Part No.
YAL434WN
YAL404WN
CAPACITY (Ibs.)
Single
Double
Line
Line
1500
2000
LIFT (ft.)
Single
Double
Line
Line
3000
4000
Wire Rope
Diam. (in.)
15
10
30
20
3116
7h2
LUG-ALL CABLE PULLERS
*NON STANDARD LIFTS AVAILABLE FROM STOCK
LUG-ALL cable hoists feature strong aluminum frames, a
reversible safety handle, and an interlocking pawl system.
LUG-ALL's can be oeprated smoothly at any angle, Three
workable hooks allow a variety of working positions. Free
release, for fast cable payout works only when the hoist is
unloaded. Model shown below features clevis hook.
INGERSOLl~AND.
MATERIAL HANDLING
SILVER SERIES LEVER HOIST
• All steel construction
·360 degree handle rotation
• Rubber handle grip in all sizes
• Reliable disc brake
• Premium grade alloy chain
• Hardened swivel-latch hooks
• Lightweight
• Low handle force
• Short handle stroke
• Zinc-nickle-chrome finish-more durable and corrosion
resistant than paint
Part No.
IR07505
IR11505
IR30005
IR60005
Capacity
Metric Tons
0/'4
1'h
3
6
Lbs.
*Lift
Length
(ft.)
No. of
Chain Falls
Netwt.
(Ibs.)
1650
3300
6600
13200
5
5
5
5
1
1
1
2
15
24
44
66
Part No.
LUG2250C15
CAPACITY (Ibs.)
Single
Double
Line
Line
1125
LIFT (ft.)
Single
Double
Line
Line
15
2250
Wire Rope
Dlam. (in.)
7'h
YALE
ELECTmC LIGHTWEIGHT PORTABLE HOISTS
*NON STANDARD LIFTS AVAILABLE FROM STOCK
Lightweight, portable electric hoists that can go anywhere,
At a net weight of only 17 Ibs. (V2 ton unit) these are, pound
for pound, the most powerful hoists on the market. They
incorporate features like electronic overload protection
piUS an overload indicator light to alert the user of an
overload condition; upper and lower limit switches to prevent hook over travel, 0.3 HP permanent magnet motors
and pendant control with internal strain relief.
YALE PE RATCHET LEVER HOISTS
Lightweight Models
3J4 to 6 ton capacities. Link and roller chain models. 20 degree lever
stroke for precise load spotting. Standard lift 5 feet. Self-adjusting,
water resistant load brake operates independently of load. Free
wheeling chain adjustment feature. One piece aluminum frame
design.
LINK CHAIN MODElS
Part No.
YAL34PES
YAL112PES
YAL3PES
YAL6PES
Capacity
(Tons)
*Lift
(ft.)
%
5
5
5
5
1'h
3
6
*NON STANDARD LIFT LENGTHS AVAILABLE FOR IMMEDIATE DELIVERY.
306
Part
No.
YAL14101S
YAL14102S
YAL14201S
YAL14202S
YAL12101S
YAL12102S
Capacity
(tons)
Lift
(ft.)
Speed
(fpm)
Voltage
Weight
(Ibs.)
1;4
1;4
10
10
20
20
10
10
12
12
12
12
10
10
115V
230V
115V
230V
115V
230V
14
24
17
17
17
17
%
V4
'h
Y2
Tel: 718-387-0300 • FAX: 718-387-1874
c
ADJUSTABLE PIPE LIFTING CLAMPS
MERRILL "GX" LIFTING CLAMPS
For Horizontal or Vertical Plate lifting
Plate lifting clam ps that can be used for both vertical
and horizontal-to-verticallifting. Exclusive wear indicator system clearly indicates to the operator
when the cam needs to be changed. Spring loaded
cams remain engaged under no-load conditions for
easier turning of plates from horizontal to vertical.
Drop forged and heat treated. Gripping surfaces
are case hardened, alloy steel. The working mechanism is fully enclosed for protection.
Working Load
Limit (Tons)
Grip Range
(in.)
Wt.
(Ibs.)
1
1116 - 3f4
3f4 - 1%
13/8 - 2
1;'16 -1
1 -1 3/4
8
8V2
11
CC6423005
CC6423923
CC6423924
CC6423010
CC6423925
CC6423926
CC6423015
CC6423020
1
1
3
3
3
17
18
20
40
143
1%-2%
5
V2-2
10
1/2 - 2V2
SUPERCLAMP Pipe Lifting Clamps are designed
for efficient and easy handling of cylindrical objects
such as pipes or bars. The clamp is readily applied
to cylindrical objects.
SCP1
SCP2
SCP3
SCP4
SCP5
SCP6
SCP7
SCP8
SCpg
ADJUSTABLE RAIL LIFTING CLAMPS
i··
,·-· -J· · ·~· ~.
Developed for standard rail sections, this rail clamp
adjusts quickly and easily, while providing a secure
grip on the rail. Its light weight, low maintenance
requirements and extra heavy duty construction
makes these clamps indispensible for anyone who
needs to move rail sections. Adjusts to all standard
rail to 113A.
"1
'~,:
. 'f·
".> \.
-t)
.•.
Safe Working
Load (Tons)
Part No.
SCR1
SCR2
This clamp features a heavy plate welded to its bottom edge making it ideal for
dragging plates or heavy objects. Made of drop forged and heat treated steel with
case hardened jaws for wear resistance. Note: Read manufacturer's instructions
before using clamps.
Part No.
Working
Load
Limit
(Tons)
V2
CC55DR
CC21DR
CC33DR
1
3
Grip
Range
(in.)
Weight
(Ibs.)
0-%
0-3/4
0-1
5
11
25
41/2
7
9
11
13
15
17
19
24
2%
4
5
7
8
9
10
12
16
2240
3360
4480
6720
6720
6720
6720
8960
8960
1""""-
MERRILL DRAG CLAMPS
Adjustable to Fit 0.0. (in.)
Min.
Max.
Safe Working
Load (Ibs.)
Part No.
3
5
ADJUSTABLE RUNWAY BEAM TROLLEYS
With Anti-Drop Plates
SUPERCLAMP Adjustable Runway Beam Trolleys
are of acknowledged and experienced design. The
unique quality features of the new range of manual
traveling gear are the "Anti-Drop Plates" (ADPS),
which are incorporated into the practical design of
these transferable and mobile securing attachments.
FIXED JAW ADJUSTABLE GIRDER CLAMPS
These clamps provide versatile rigging or hoisting points
usable for lifting, pulling, anchor points or temporary holding. They're quick and easy to install without tools and are
easily removable for use in different locations. And their
special design applies the load away from flange edges to
reduce flange stress. Best of all, the threaded adjustment
mechanism easily attaches to a wide range of flange widths
to provide a safe and secure grip.
Part No.
SCBA1
SCBA2*
SCBA3
SCB1
SCB2
SCB3
Safe Working
Load (Tons)
1
1'/2
2
3
6
10
Width Adjustment (in.)
Min.
Max.
2%
3
3
3
41/2
4
Max. Flange
Thick. (in.)
8
8
8
8
12
12
1
1
1
11h
1%
1%
*Note: Anti Drop Plates not incorporated into SCBA2
JET MANUAL BALL BEARING ADJUSTABLE TROLLEYS
Part No.
Capacity
(Tons)
YAL1000
YAL2000
YAL3000
YAL5000
1
2
3
5
Flange Width (in.)
Min.
Max.
3.0
3.0
3.9
3.9
9.0
9.0
9.0
10.2
Net
WI. (Ibs.)
Part No.
Cap'y
(Tons)
8.8
13.2
17.6
22.0
JET12T
JET1T
JET2T
JET3T
JET5T
'/2
1
2
3
5
Tel: 631-242..8555 • FAX: 631-667-8869
I Beam Flange I Beam Vert.
Width (in.)
Meas. (in.)
3'l'16- 5'/2
3% - 57/8
4Va - 615116
4-6
5-7
5-12
5-12
8 -18
8-18
10-20
307
THE ORIGINAL GRIPHOISJTM
UNIVERSAL LIFTING .. PULLING TOOLS
There are a number of reasons the GRIPHOIST® name is the most trusted in the
industry. Griphoist is a UNIVERSAL TOOL. It is a hoist, a winch, a tensioner, a binder, a
puller and much more. It is also a PORTABLE tool. It has the lowest weight to capacity
ratio of any hoist or winch with nearly comparable capacities. Griphoist is also a
UNIQUE tool. Due to its unique wire rope gripping system, it provides UNLIMITED
pulling length or lifting height and pinpoint accuracy in positioning any workload.
Griphoist offers SAFETY: it is simply designed and ruggedly constructed with the
finest alloy heat-treated steel. The load is automatically help securely with overload
protection. An indispensable tool for all construction and maintenance jobs, it is used
daily by millions of people all over the world .
• eL:=.:l
GRIPHOIST MODEL T-508
2000 Ibs. Material Lifting Capacity
The T-508 is the lightweight #1 of the newT-500
series. It has an improved load capacity vs.
weight ratio. Also new is that with only a 60
degree angle lever operation you get a faster lift
or pUll. This saves considerable amounts of
energy, time and money. The T-508 is exactly
right for applications in construction, steel and
frame structures, mining, utilities, etc.
This is the rugged lightweight #2, for all jobs
where minimum weight is of maximum interest.
• Steel Erection-accurate positioning of metal
structures, guying metal framework
• Electricity-tensioning aerials (electricity and
telephone), erecting poles, assembling
pylons
• Transport-loading and unloading, securing
loads
• Industry-rigging operations in workshops,
maintenance of machinery, installation of
boilers, valves, pipes, spotting railroad cars
This is the rugged lightweight #3-again, a
low-weight machine (51 Ibs.) in comparison to
its capacity (8000 Ibs.). This makes its use interesting for applications where the weight factor is important.
• Steel Erection-fixing heavy girders, erection
steel buildings, derricks, silos, lifting hopper
bottoms, assembling tall aerial cableway
pylons
• Industry-Installation and removal of heavy
machinery, presses, removal for repairs of
heavy machinery parts in mills, cement
plants, oil and chemical industries
• Transport-debogging trucks, securing
heavy loads
Part No.
Model
No.
Material Lifting
Capacity (Ibs.)
GRH05080
GRH05160
GRH05320
T-508
T-516
T-532
2000
4000
8000
Griphoist Wire Rope
Dia.
Break Load
511e"
Feet Per
Minute
Ship
Wgt.
7-9
261bs.
611bs.
77lbs.
10,OOOlbs.
20,000Ibs.
40,000Ibs.
7116"
0/8"
6
6
INDUSTRIAL HAND WINCHES
These industry duty hand winches make any lifting or pulling job easier. Lightweight,
portable and compact they move easily from job to job. Ideal for use in the plant or on
the construction site. Standard features include: Double brake pawl for maximum
safety and reliability-engages automatically whenever handle stops; Brake mechanism of hardened steel with stainless steel springs; double pawl ensures quiet
operation; Weather protected mechanisms-both break and gear sections are hermetically sealed with sealed bearings for dust and weather protection; Handle grip is
designed to allow maximum comfort during operation; Handle length is easily
adjustable. All units eqUipped without cable.
Part No.
JET181005
JET181025
JET181050
JET181075
JET181300
308
Vert. Lift
Cap'y
(Ibs.)
220
1,100
2,200
4,400
6,600
Horiz. Pull
Cap'y
(Ibs.)
1,100
5,000
11,000
22,000
33,000
Drum
Cap'y
1f4"x65V2'
l!4"x 131'
5/1e" x 131'
3fe"x 131'
W'x131'
Tel: 718-387-0300 • FAX: 718-387-1874
Hand Pull
Required
to Lift
Loads (Ibs.)
28
28
32
28
40
Gear
Ratio
1:1
1:3.8
1:7
1:22.68
1:29.16
BEEBE SHUft-WORM HAND WINCHES
500 THRU 1,850 LRS. WINCHING CAPACITY
For intermittent hand use, these automatic, self-locking winches feature open worm gear, ductile iron frames, cast
iron drums, cast steel worms, steel shafts and lock-on handles.
Part No.
Capacity
1st Layer
Gear
Ratio
1/8"
BBW2
BBW5
BBW10
500 Ibs.
7501bs.
18501bs.
25:1
25:1
28:1
119
327
980
Drum Capacities (ft.)
3/16"
1/4"
54
148
405
5/16"
Net
Wt.
15
42
146
17
20
56
25
68
237
".
BEEBE HANDI~WINCH HAND WINCHES
Y2 AND 1 JON WINCHING CAPAClnES
~!
.. Portable hand winches for light lifting, lowering, holding, moving or securing
"Winches are cast steel, ductile iron, bronze, available with or without hand brake
.. Spring operated holding dogs are standard, two way operation on models without brakes
.. Two drum widths: 3" and 6"
.. Marine models standard
3" Drum, without brake
Part No.
Capacity
1st Layer
BBAM3
BBBM3
Y2ton
1 ton
Gear
Ratio
Ve"
3ft s
5.25:1
5.25: V'0.5: 1
367
367
151
151
Gear
Ratio
Ye"
3116"
5.25:1
5.25:VlO.5:1
367
367
151
151
Gear
Ratio
1h"
3A61/
5.25:'Ao.5: 1
735
735
303
303
Gear
Ratio
Va"
3/16/1
5.25:1
5.25:Y,0.5:1
735
735
303
303
5As"
Ship
Wt.(lbs.)
54
54
19.75
22.5
114"
5As"
Ship
Wt.(lbs.)
89
89
54
54
22
24
'/4"
o/1s"
Ship
Wt.(lbs.)
109
109
22
24
v."
5As"
Ship
Wt.(lbs.)
178
178
109
109
23.5
27.5
/t
114"
89
89
3" Drum, with brake
Part No.
Capacity
1st Layer
BBAM3B
BBBM3B
V2ton
1 ton
6" Drum, without brake
Part No.
Capacity
1st Layer
BBAM6
BBBM6
V2ton
1 ton
5.25:1
178
178
6" Drum, with brake
Part No.
Capacity
1st Layer
BBAM6B
BBBM6B
lhton
1 ton
BEEBE ALL STEEL HAND WINCHES
2 AND 5 TON WINCHING CAPACITIES
• Winches are cast steel, ductile iron, bronze with replaceable bronze bearings
.. Fast two-speed gear change-4:1 for slack cable take-up only
.. One piece handle with adjustable pinion
o Easy free-spooling
• Spring loaded holding dog with release handle
• Hand operated adjustable holding brake
o Marine models have cable clamp, zinc matallized brake drum, rust-resistant paint
Part No.
Capacity
1st Layer
Gear
Ratio
BBLM6
BBLM10
BBHM8
BBHM12
2ton
2 ton
5 ton
5ton
4:1-22:1
4:1·22:1
4:1-24:1
4:1-24:1
114"
5A6"
278
464
180
300
o/e"
lh"
sAl"
Net
Wt.(lbs.)
133
222
358
537
66
111
220
330
123
185
60
70
110
138
Options
Part No.
BBSBH
Description
Safety Brake Handle-load automatically held when cranking stops
Tel: 631-242-8555 • FAX: 631-667..8869
309
PORTABLE GAS POWERED WINCHES
The G1800 and G900 are the latest additions to the gas
powered Winch Line. Both units offer "go anywhere"
pulling power to a variety of users with countless
applications for rescue workers, hunters, boat yard
workers, off road vehicles and anyone needing a strong
dependable winch in a tough to reach spot. Unique
features include free spool and a manual load release that
is controlled by the operator. The G1800 and G900 are
both powered by the Homelite® Super 2 Power Head.
The G150 is a windlass capstan design for unlimited cable
lengths.
MODEL DESCRIPTION
Rated Stall
Single Line
(Ibs./kgs.)
Control
Cable
Size
Cable
Guide
Free
Spool
Accessories
Included
Shipping
Wt.
(Ibs./kgs.)
Part No.
Type
RUG1800
Portable
with Accessories
1800/818 Manual Throttle
3/16/1 x 75'
(4.8mm x 22.7m)
Yes
Yes
0/16/1 x 6' (7.9mm x 1.8m)
tie down cable w/2 hooks
39/18
RUG900
Portable
with Accessories
900/409 Manual Throttle
W' x 80'
(3.2mm x 24.4m)
Yes
Yes
5/16/1 x 6' (7.9mm x 1.8m)
33/15
RUG900 LC
Portable
with Accessories
900/409
Manual Throttle
W' x 180'
(3.2mm x 49m)
Yes
Yes
5;16/1 x 6' (7.9mm x 1.8m)
35/15
Windlass
1000/454
Remote foot
Throttle
NI A
N/A
N/A
5/16/1 x 6' (7.9mm x 1.8m)
34/15
RUG150
WINCH RATING/LOAD CAPACITIES
UNIT SPECIFICATIONS
G1800
G900 & G900LC
G150
Models G1800
Actual
Line Speed No. of Lines
Pulling (no load) Avg. and Pulley
Power
fpm/mpm
Blocks
Models G900 & G900LC
Actual
Line Speed
Pulling
(no load) Avg.
Power
fpm/mpm
Weight
33Ibs./15kgs.
w/cable
27/29Ibs./13kgs.
wlcable
251bs./11 kgs.
Dimensions
16V2"x11/1x9/1
(40cmx28cm
x23cm)
16112"x11/1x9"
(40cmx28cm
x23cm)
15/1x10"x13"
(38cmx26cm
x33cm)
7000 Ibs.
(3180 kgs.)
7/2.1
4 Iinesdouble block
Power Head
1.9 cu. in.
1.9 cu. in.
1.9 cu. in.
3500 Ibs.
(1590 kgs.)
13/4.0
2 linessingle block
1700Ibs.
(818 kgs.)
15/4.5
Reduction
Ratios
263:1
216:1
135:1
26/8.0
1 lineno block
9001bs.
(409 kgs.)
30/9.0
Drum
Diameter
(No Cable)
2/1
5cm
1800 Ibs.
(818 kgs.)
1112"
3.8cm
3112"
9cm
75' of 3/16/1
160' ofW'
N/A
23m of5mm
49m of3mm
Drum
Capacities
PORTABLE GASOLINE POWERED WINCH ACCESSORIES
Part No.
Description
RUG200
RUG201
112" Poly-propylene rope perlft
112" Poly-propylene rope (stretch resistant)
perlft
9/16" (14.3mm) hook (attached to rope G200
or G201 at no charge)
Winch carrier mount
5' (1.5m) remote throttle control (for G150
only)
10' (3m) remote throttle control (for G150
only)
RUG203
RUG210
RUG215
RUG216
310
Shipping
Wt.
Ibs./kgs.
N/A
N/A
3/1.3
10/4.5
3/1.3
Part No.
RUG230
RUG231
RUG236
RUG237
RUG238
RUG240
RUG247
Description
Cable clamp/lock for cable .06" to .25"
Cable clamp/lock for cable .125" to .5"
Gear Grease 1 oz. tube
W' x 80' (3.2mm x 24.4m) cable w/hook
Va" X 150' (3.2mm x 49m) cable w/hook
3;16" x 75' (4.8mm x 22.7m) cable w/hook
5/16/1 x 6' (7.9mm x 1.8m) tie down w/2 hooks
Shipping
Wt.
Ibs./kgs.
5/2.3
5/2.3
N/A
5/2.3
4/1.8
6/2.7
5/2.3
5/2.3
Tel: 718-387-0300 • FAX: 718-387-1874,
"
HI-JACK® MULII-PURPOSE LIfTER
500 lb. Capacity
..~..
A portable, economical method
of lifting loads up to 500 Ibs. to
heights up to 10 feet (orto 15 feet
with ceiling or wall stabilizer).
Can be easily set up by one man
in just minutes. Made from 11
gauge tubular standards with
friction-free roller action lifting
jack. 30" x 30" base for exceptional stability. 1', 2' and 4' interchangeable posts for maximum
versatility. Standard equipment
includes both wall and ceiling
stabilizers.
One man can now lift 500 lb. loads up to
20 ft. in two minutes or less. The model
VMC512A will elevate loads up to 12' and
can be converted to lift heightsof5', 8' org'
using the interchangeable posts supplied.
The model VMC520A has a maximum lift
height of 20' and is equipped with outrigger bars and adjustable wing screw levelers and sturdy rubber feet to stabilize the
load. The model VMC520A can be quickly
converted to intermediate heights of 5', 10',
14' or 16' with the interchangeable posts
supplied. Both models include an anti-friction 500 lb. capacity hand winch with automatic brake that holds the load in any position. 3" casters standard on both models.
Part No.
VMC512A
VMC520A
Maximum lifting Capacity
Weight
Height
(Ibs.)
(ft.)
500
500
12
20
Ship
Wt.
(Ibs.)
212
282
Part No.
VMC1A
Part No.
VMC1012A
VMC1012AX
1000
24" Height Extension
12'6"
15
Wt.
(ibs.)
110
Extra heavy duty construction allows loads of up
to 750 Ibs. to be lifted to a height of 18 feet.
Features push button swing-out outriggers for
added stability, reversible platform forks, all steel
construction and non-marking casters. Folds
down to fit easily in a van or pick-up. All needle
roller bearing winch operates smoothly and
easily.
Ship
Wt.
(Ibs.)
282
500
Ship
*When used with ceiling or wall stabilizers supplied.
Heavy duty 1000 lb. portable lifter lifts loads up to
1000 Ibs. to a height of up to 12'6" quickly and
easily. Two handle cable winch for efficient leverage. 5" casters front and rear for portability.
Fits through any 30" doorway. Includes 3' and 5'
interchangeable posts that provide a variety of
lifting heights. Optional 24" height extension increases maximum lifting height to 14'6". Outriggers fold out for increased stability - fold in for
maximum portability.
Maximum Lifting Capacity
Weight
Height
(Ibs.)
(ft.)
Weight
*Height
(ibs.)
(ft.)
Part No.
VMC758T
Weight
Height
(Ibs.)
(ft.)
750
18
Ship
Wt.
(Ibs.)
420
,
,
Tel: 631-242-8555 • FAX: 631..667-8869
311
WIRE ROPE CLIPS
CROSBY FORGED CLIPS
Hot dipped galvanized steel. Recommended for light duty
service. Meets Federal Specs FF-T-276b Type II.
Genuine Crosby-Laughlin forged wire rope clips
are hot dipped galvanized. Bases are forged on
all sizes shown. Meets Federal Spec FF-C-450
Type 1 Class 1.
Part No.
Size (in.)
'CLG41118
;CLG 4:i1"1316
!CL$4tn4
Clip &
Rope Size
(in.)
Part No.
Min. No
Clips Req.
2
2
2
CLG45018
CLG450316
CLG45014
:CLG~50516
%6
3;'a
2
iqLG450716
. V16.
2
lGt<345038
"
.~
2
3
3
4
CLG45012
CLG45058
CLG45034
MALLEABLE CLIPS
Malleable wire rope clips provide excellent value for light holding jobs.
All sizes are hot dipped galvanized to prevent rust. Not recommended
for weight bearing applications.
Clip &
Rope Size
Part No.
(in.)
CLG42618
CLG426316
CLG42614
CLG411516
CLG41138
CLG41112
:GLG4}158
5/.8'.
;ClG41178
%
7/a
:CLG4'1134:
IMPACTO WIRE ROPE CUTTERS
The standard tool used throughout the world! These are
the original portable impact cutters, and designed for one
purpose: to cut wire rope quickly, cleanly and safely.
Actuated by striking with a hammer, they are simple to
, operate, and do a super cutting job with only a few blows.
These cuttters are precision engineered to deliver a
good, clean cut without affecting the original roundness
of the wire rope. Even the finest wires cut cleanly. The
blades and dies are made of the best tool steel available, heat-treated
and ground to close tolerances. No other similar product matches this
quality of materials and workmanship.
Part No.
Description
IMP1
IMP2
IMP3
1" Wire Rope Cutter
11;16" Wire Rope Cutter
1W' Wire Rope Cutter
AIRCRAfT CABLE - 7 X 19
CLG42634
CLG42678
CLG4261
3f4
7/a
1
CROSBY FIST-GRlp® CLAMPS
Genuine Crosby Fist-Grip® offer maximum holding
power. They are easily installed since the two parts
are identical. Made from all forged steel and hot
galvanized. Supplied with heavy hex nuts. Meet or
exceed Federal Specification FF-C-450 Type III.
Part No.
Clip&
Rope Size
CLG429516
CLG42938
CLG42912
Other sizes available on request.
312
5116
3fa
1/2
Minimum
# Required
2
2
3
Standard flexible aircraft and stainless steel cable in the most popular
sizes. Tough construction resists crushing of heavy loads. It is used
where flexibility and good resistance to wear is required.
Part No.
Dia. (in.)
Breaking
Strength (Ibs.)
1fa
3116
1/4
5116
3/a
1/2
2,000
4,200
7,000
9,800
14,400
22,800
1/a
3116
1/4
1,760
3,700
6,400
Galvanized
WIR018
WIR0316
WIR014
WIR0516
WIR038
WIR012
~taitil.~i~ Steel
WIROSS18
WIROSS316
WIROSS14
::i
Tel: 718-387-0300 • FAX: 718-387-1874
CROSBY SCREW PIN SHACKLES
CROSBY CLEVIS GRAB HOOKS
Crosby forged screw pin anchor shackles are quenched and tempered with alloy
pins. All sizes are hot dipped galvanized to prevent rust.
Part No.
Size
(in.)
Safe
Work
load
(Tons)
Inside
Lgth.
(in.)
Inside
Width
At Pin
(in.)
3116
V3
7/S
3/e
CLG209316
CLG20914
CLG209516
CLG20938
V4
V2
We
V2
5116
%
1
17/32
17/32
21/32
3/e
1V16
Flat design to minimize deformation of chain links. Forged from bar quality carbon
steel, heat treated to break high test chain.
CARBON - For Use With Proof Coil Chain
Part No.
Size of
Chain
(in.)
Dimensions (in.)
Clevis
Inside
Throat
Width
Open
Working
Load
Limit
(Ibs.)
CLH330i4
CLH3305i6
CLH33038
CLH330i2
CLG20978
CLG2091
CLG2091-18
2600
3900
5400
9200
GRADE 70 (TRANSPORT) CLEVIS GRAB HOOKS
CROSBY EYE HOOKS
CARBON - 320C
Average proof load is twice the safe working load. Carbon steel heat treated.
Safe
Work
Dimensions (in.)
B
load
Part No.
CL320C34
CL320C1
CL320Ci-i2
CL320C2
CL320C3
CL320C5
CL320C7-12
(Tons)
3f4
1
1 V2
2
3
5
7V2
Part
No.
E
o
(without
latCh)
(with
latch)
1
111'16
iVa
1%
1V2
17/8
7/a
2%
For use with Grade 70 transport chain. These forged alloy products are heat treated
for greater strength.
3%2
1
1%
i 1V32
11'1;16
2Y16
CLA33014
CLA330516
CLA33038
Chain Size
(in.)
Max. Working load
Limit (Ibs.)
V4
3500
4500
7100
5116
3fB
CROSBY "MISSING LINK" REPLACEMENT LINKS
• Forged steel, quenched and tempered
• Integral rivets join the two halves-matched
lugs distribute the load
• Meets or exceeds Fed. Specs. RR-C-271b
Type II
ALlOY-320A
Alloy heat treated steel. Average proof is twice safe working load.
Safe
Wo~
Part No.
CL320A1
CL320A1-12
CL320A2
CL320A3
CL320A4-12
CL320A7
B
Load
(Tons)
Dimensions (in.)
E
(Without
(with
latch)
latch)
o
1
3f4
1
1V2
29/32
11;16
7/8
3%2
2
3
4V2
7
11/a
1114
19;16
2
1%
1%
1V2
F/a
iVa
11 V32
11V16
1
*Have rivets only-no interlocking lugs
Tel: 631-242-8555 • FAX: 631-667-8869
313
CROSBY A 327 GRADE 8 ALLOY m SLING HOOKS
m
Individually proof tested.
• Alloy steel quenched and tempered
" Individually proof tested
• Proof test certification shipped with each
hook
Part No.
Part No.
CLA32714
CLA32738
CLA32712
CLA32758
Size
(in.)
Working Load
Limit* (Ibs.)
%
3fs
3,500
7,100
12,000
18,100
V2
5/8
CLA34212
CLA34258
CLA34234
CLA3421
CLA3421-14
CLA3421-12
Size
(in.)
Inside
19th. (in.)
Inside
Wd. (in.)
Working load
Limit* (Ibs.)
112
5
6
5V2
7
8%
10V2
2V2
3
2%
3V2
4 3/8
5%
4,920
6,600
10,320
24,360
35,160
47,880
5/8
%
1
1%
1V2
*Minimum Ultimate Load is 6 times Working Load Limit (single pull)
CROSBY GRADE 8 ALLOY A-345 MASTER LINK ASSEMBLIES
*Ultimate Load 4 times Working Load Limit
" Alloy steel quenched and tempered
• Individually proof tested
link
CROSBY GRADE 8 ALLOY CLEVIS HOOKS
SLING HOOKS
GRAB HOOKS
SLING HOOKS
Crosby grade 8 alloy sling hooks are quenched and tempered. Each
hook is individually proof tested. Pin locking requires no special tools.
Proof test certification shipped with each hook.
Part No.
CLA33914
CLA33938
CLA33912
CLA33958
Chain
Size
(in.)
%
3fs
V2
5!a
*Work
load
Limit
(Ibs.)
Part No.
CLA34534
CLA3451
CLA3451-14
CLA3451-12
Master Link
Size (in.)
Working load
Limit* (Ibs.)
%
1
1%
11/2
9,100
18,400
31,200
47,000
*Working Load Limit with coupling links at 60° included angle. Ultimate
Load is 3.5 times the Working Load Limit.
CROSBY GRADE 8 LOK-A-LOY 8 ALLOY CONNECTING LINK
3,500
7,100
12,000
18,100
"Individually proof tested
• Exclusive locking sleeve for simple
assembly-no special tools needed
link
• Alloy steel quenched and tempered
*Ultimate load is 4 times working load limit.
GRAB HOOKS
Crosby grade 8 alloy grab hooks are quenched and tempered. Each
hook is individually proof tested and certified. Pin locking requires no
special tools.
Part No.
CLA33814
CLA33838
CLA33812
Chain
Size
(in.)
*Work
load
Limit
(Ibs.)
%
3fs
V2
3,500
7,100
12,000
CALL FOR COMPLETE SPECIFICATIONS
314
Part No.
CLA33714
CLA33738
CLA33712
CLA33758
CLA33734
Size
(in.)
Working Load
limit* (Ibs.)
Min. Hole
Size
1/4
3,500
7,100
12,000
18,100
28,300
.53
.75
.94
1.12
1.28
3fs
1/2
5!a
%
*Ultimate Load 4 times Working Load Limit
Tel: 718-387-0300 • FAX: 718-387-1874
CROSBY S~4320 LATCH KITS
BARREL HOOKS
Forged Carbon Steel. Galvanized. Meets
the requirements of Federal Specification
RR-C-271 B Type V, Class 6.
Part No.
CLG377
• Heavy duty stamped latch interlocks with hook tip
• High cycle, long spring life
• Can be made into a "Positive Locking" hook
Hook Size (tons)
Carbon
Alloy
Part No.
CLS432034
CLS43201
CLS4320112
CLS43202
CLS43203
CLS43205
CLS4320712
CLS432010
CLS432015
3f4
1
1V2
I.D.
Eye
Dimensions (in.)
O.D.
O'AII
Eye
Lgth.
1.56
2.81
Working Load
Limit (Tons)
\J{@
W;l
t-l
~:1
(:7E:::';-;Z;i-s.~...;t;;~s'?!lJ
2.88
McKISSICK SNATCH BLOCKS
1
1V2
2
2
3
3
5
5
7
71/2
10
15
11
15
22
Forged alloy heat treated hooks. Bronze
bushing. Opening feature permits insertion
of rope while block is suspended from a gin
pole. Exclusive bolt retaining springs assure no lost bolts.
LEBUS STANDARD TYPE LOADBINDERS
f~
5.0
Width
of Lip
Forged steel, quenched and tempered Lebus
load binders feature extra heavy construction at
the leverage point to prevent spreading. Heel of
binder toggles away from load, permitting easy
release. Ball and socket swivel joints at hook
assemblies permit a straight line pull.
Part
No.
CL4184-12
CL4186
Sheave
Diameter
Size (in.)
Wire Rope
Size (in.)
Working
Load
Limit
(Metric Tons)
3/8-%
4
o/s-3,4
8
4V2
6
WI.
(Ibs.)
11.7
26.9
LlfTALl ADJUST-A-LINK
$
The Adjustable Alloy Chain Sling
~.
i
Part No.
CL71
CU\1
CLC1
Min.-Max.
Chain Size
(in.)
Handle
Lgth. (in.)
Take-Up
(in.)
Working
Load Lim.
(Ibs.)
5/16-%
3/8 - 1/2
1/2 - 5/8
16
18'/2
21
4%
41/2
4 3/4
5,400
9,200
13,000
LEBUS RATCHET TYPE LOADBINDERS
Continuous take-up with infinite adjustment gets the last half link of
chain. Features one piece assembly - no bolts or nuts to loosen. The
ratchet spring is rustproofed. All
load bearing or holding parts are
forged. Easy operating positive
ratchet.
Part No.
CLR7
CLRA
Min.-Max.
Chain Size
(In.)
Handle
Lgth. (in.)
Take-Up
(in.)
Working
Load Lim.
(Ibs.)
5/16-%
3/8 - 1/2
14
14
8
8
5,400
9,200
Heavy duty U.S. Grade 80 alloy chain with patented adjusting master link makes this
economical chain sling unique. Easier to use and much more versatile than other
single or double chain slings. Every sling is proof tested and assembly ratings are
stamped into the master link. Alloy sling hooks are standard.
Part No.
Size & Length
L107006
L107010
L109006
L109010
L112010
L112014
L116010
L116014
7/32" X 6'
%2"x10'
9/32" x 6'
%2"x10'
3fa" xi 0'
3/8" x 14'
1/2" X 10'
1/2"X 14'
Tel: 631-242-8555 • FAX: 631-667-8869
Capacities (Ibs.)
Single
Double
@90°
@60°
2100
2100
3500
3500
7100
7100
12000
12000
3600
3600
6100
6100
12300
12300
20800
20800
315
CROSBY FORGED TURNBUCKLES
CROSBY FORGED SHOULDER NIff EYE BOLTS
Get guaranteed rated capacity with Crosby forged turnbuckles. Popular sizes
provide capacities equal to the next larger size in many other brands. Made from hot
dip galvanized forged steel. Hook and eye series shown below. Other styles and
sizes available on request.
Hot dip galvanized. Forged steel. All bolts hot dip galvanized after threading. Hex
nuts are American Standard Heavy, hot dip galvanized.
Diameter and
Takeup (in.)
Overall length
With Ends Closed
CLHG225386
CLHG225126
CLHG225129
3/a X 6
iF/a"
V2 x 6
V2X9
135/16
165/16
iQ~p'!~g2!51212
1;2xt2
195/16
151/2
181/2
Part No.
'%~6
;CliRtp225586
:C~f1J3?25589
%x9
CLHG2255812
CLHG225349
CLHG2253412
21V2
5fax12
3f4x9
314 X 12
20
23
MANILA ROPE WOOD BLOCKS
Wood manila rope blocks with loose swivel hooks with latch and
becket. Commonly used for block and tackle lifting applications.
Shank Dia.
& Lgth. (in.)
Part No.
Working
load (Ibs.)
. ,}!i)(2
,OLG277142
'CLG277144
:CLGZ7;751 6214
CLG277516414 .
CU32J138212
650
650·
1200
1200
1550
·.·.14x4
.'o/i~)( 2i4
o/1!;X4V4
%X2V2
CLG27738412
CLG27712314
CLG277126
CLG277584
CLG277586
%X4V2
lh x 3%
V2x6
: OLG27734412
'CLG277346
;CLG?71785
'~/4X4V2
1550
2600
2600
5200
5200
%x4
5/a x6
7200
7200'
10600
13300
>:0/4)(6
?!sf!5
lx6
CLG~7716
CROSBY FORGED EYEBOLTS
Genuine Crosby forged eye bolts are made from hot dip galvanized forged steel.
Regular nut style shown below. Shoulder nut series also available.
Part No.
CLH21C4
CLH21C5
CLH21C6
CLH22C4
CLH22C5
CLH22C6
Block
Size
(in.)
Diam. of
(in.)
Type
Work
Load
(lb5.)
4
5
6
V2
Single
Single
Single
Double
Double
Double
1,000
1,200
1,800
1,400
1,800
2,500
Rope
5fa
3/4
V2
5/a
4
5
6
3f4
CROSBY GIN BLOCKS FOR MANILA ROPE
Crosby manila rope gin blocks feature drop forged swivel
latch hooks and iron bearings. Excellent for light hoisting
by Roofers and Contractors. Enamel red finish.
Shank Dia.
and 19th.
(in.)
Part No.
·CL(32.91142
!CL(3:2SjJ0144
:CL0:21;1;1516214
%x2
',' %x4
".,~:6X21,4
'3%'6'X4%
.:3/a X21f2
CLq2~)516414
•GLG.?fjl:,18212
%x4Vz
%x6
V2 X 3V4
V2X 6
V2x8
CLG29138412
CLG291386
CLG29112314
CLG291126
CLG291128
Thread
Lgth.
(in.)
t V2
(2Y2
JY2
~Y2,
. ',Al(z
2lh
2V2
1V2
3
3
: CLC?~~P21 0
: CLG:~~i1:5,84
:CU~1?915f38
Part No.
CLT350C12
(in.)
7/a -1
12
c
316
Rim
Thick
(in.)
1%
\
>
Working
Load
(Ibs.)
1,000
~
2
3
3
x10
3
." .•• .2.
/2 A!
j
1%
..'. 2112
11/4
"0..
2%
CLG29119
CLG291112
1x9
1 x 12
120fr'
1550'f.
1550
1550
2600
2600
2600
26QQ'
5200
5200 ...
11/4
1V2
1'/2
1'/2
1'/2
5200
7200
7200
7200
7200
2V2
3
3
3
3
'
:,1
720Q'
1p~gO! .•.:
1Q6,°9"':'!
~~g~jCi
4
2
4
4
2
4
y
880 MEEKER AVE • BROOKLYN, NY n222
Tel: 718-387-0300 • FAX: 718-~~7-1874
,
65Q"
650
"'1200.:·
520b6'
520P';;
':Yax8
Jx6
Working
Load
(Ibs.)
11,4:' '2V2
:']la)(J2
: C~G:2~116 '"
-
11/2
2
2
2
.. ,7/6 x5
:CL~2.~.1188
•C",<32\1178.12
-«.
1V2
%
3f4
1
1
1
.x:r o/4xJ2
:CL<32.9t785
Outside
Diam.
(in.)
4
x 4V2
3f4x 6
314 X 8
3/4
.¢lG~,~1,$fl12
Rope
5/ax12
3/4
0.0.
(in.)
1f21
lh..'-::1
5/a '::'11/4
o/a
_11,4
3f4··;tV2
·1 '.
11,4
.CLG~1586
• CkG:?~15810
CLG2915812
CLG29134412
CLG291346
CLG291348
CLG2913410
Diam.
Eye Dis.
I.D.
(in.)
13300
13300
BENT EYE BOllS
CARBON STEEL ZINC PLATED
=
Furnished with hex nuts (unassembled). All
sizes manufactured with rolled threads up
to 5/8". Zinc plated Blue Dichromated. NOT
RECOMMENDED FOR LIFTING.
Overall
Length
All Dimensions in inches
Shank
length
Thread
Length
Part No.
Thread Daa.
DAN21370
DAN21371
8-32
8-32
1%
1%
DAN21380
DAN21381
DAN21382
DAN21383
10-24
10-24
10-24
10-24
1'5/'6
1 V,6
'
2'\116
3'\I1s
10/16
1
2
3
1V2
3/a
3/a
%
DAN21390
12-24
23116
1 '/2
1%
3/a
DAN21400
DAN21410
DAN21420
DAN21430
DAN21440
DAN21450
DAN21460
DAN21470
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
2
1
1'/2
7/8
DAN21500
DAN21510
DAN21520
DAN21530
DAN21540
DAN21550
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
DAN21600
DAN21610
DAN21620
DAN21630
DAN21640
DAN21650
DAN21660
DAN21670
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
11V2
13V2
8
10
12
DAN21700
DAN21710
DAN21720
DAN21730
7/16-14
7/16-14
7/16-14
7/16-14
6
8
10
12
4
6
8
10
DAN21740
DAN21750
DAN21760
DAN21770
DAN21780
DAN21790
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5
6
7
8
10
12
3
4
5
6
8
10
DAN21800
DAN21810
DAN21820
DAN21830
5/8-11
5/8-11
5/8-11
5/8-11
6
8
10
12
1Va
1
1
11;5
2V2
I.D. Eye
%
3/a
1Va
7fa
1
5A6
9A6
Wa
9A6
17/a
1%
4
5
6
2
2 /2
'
3
4
5
3/a
9As
911s
1%
9A6
1V2
911s
911s
3V4
2V4
2
3%
4
5
6
7
2
2%
3%
4%
5%
37/8
4
5
6
8
9 /2
'
2V2
2V4
2%
3
3V2
1V2
1V2
1%
17/8
'/2
314
2
%
2V2
2V2
2V2
3/4
3/4
2%
2Va
2V2
2V2
2V2
2V2
2V2
3%
4V4
6V.
2%
3f4
5/8
1
1
1
1
1
1
1
2V2
2%
2 11.1
2V2
2314
3
3
3
3
3
3%
3
3
3
3
5V2
7V2
9V2
1%
1V4
1V4
1%
UNIVERSAL PLASTIC SHIM PLATES
PLASTIC UaSHIMS
U-Shaped plastic structural shims are rugged, inexpensive and convenient leveling
and aligning aids with a wide variety of construction applications.
2" x 2"
3" x 4" U
Part No.
PLS3416
PLS3418
PLS3414
•
Thickness
(in.)
Size
(in.)
Bolt Hole
(in.)
Pkg.
Qty.
V,S
3x4
3x4
3x4
?fa
7/a
7/a
1,000
1,000
500
Va
Y4
'<
•
•
'
) , "
t!
-
4" x 4"
Universal shim plates can be used for a wide variety of alignment and
leveling tasks. 2" x 2" shims are manufactured in a 4" x 24/1 snap/stack with
molded scribe lines which can be snapped off singly or in groups
according to size needed. 4/1 x 4/1 shims are packed individually.
Size
(in.)
Thickness
(in.)
Pkg.
Part No.
PLS16022
PLS18022
PLS14022
PLS16044
PLS18044
PLS14044
2x2
2x2
2x2
4x4
4x4
4x4
V,6
Va
2400
2400
2400
600
600
300
\
1 SOUTH SECOND ST. • DEER PARK, NY U729
Tel: 631-242-8555
• FAX: 631-667-8869
,
."
.
.
%
V's
Va
%
Qty.
.
317
U..BOLTS
CARBON STEEL .. ZINC PLATED
Unassembled, with nuts. All sizes
manufactured with rolled threads.
STRAP WASHERS
CARBON STEEL· ZINC PLATED
Part No.
Thread
Dia.
Inches
A
DAN34010
DAN34020
DAN34030
DAN34070
DAN34080
1/4
1/4
1/4
1/4
1/4
-20
-20
-20
-20
-20
%
%
%
1
DAN34210
DAN34220
DAN34240
DAN34250
DAN34270
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
13/a
1%
1
1%
2
2
1%
2Vz
2
DAN34320
DAN34330
DAN34400
DAN34410
3/8
3/8
1/2
1/2
DAN34474
DAN34491
5/8 -11
3/4 -10
Part No.
DAN35501
DAN35502
DAN35503
DAN35504
DAN35505
DAN35506
DAN35507
Width
Bet. Legs
Inches
B
Inside
Length
Inches
C
1%
1%
2%
1%
2
1Va
-16
-16
-13
-13
4Va
3%
4%
4%
3
3V2
3/a
3/a
3/a
Vz
%
%
%
1Vz
%
%
2V2
3
2V2
3
5
11V2
1313/i6
8%
107/a
19/32
13/i6
1%
110/16
15/i6
2%
3%
Pipe
Size
Inches
1V2
3
Center to
Center Width
Between Slots
Thread
Length
Inches
D
4
8
4
10
Approx. Dimensions in inches
Length
Overall
Thickness
Slot
Size
2 15/32
3132
3132
3/32
3/32
1/a
%2X 11/i6
9/32 X 11/16
11/32 X 1V16
1V32 X 11;16
7/i6 x %
7/i6 X %
7/i6 X %
3V16
3 5/32
3 1V16
3 5/16
4 3/a
5%
Va
%
Strap washers for Vi' diameter U-bolts are available upon request.
Part No.
For U-Solt Stock Nos.
Part No.
For U-Solt Stock Nos.
DAN35501
DAN35502
DAN34000 thru DAN34090
DAN341 00, DAN3411 0,
DAN34120
DAN34200, DAN34210,
DAN34220, DAN34230
DAN35504
DAN34240, DAN34250,
DAN34270
DAN34303, DAN34301,
DAN34302
DAN34310, DAN34320
DAN34330
DAN35503
S·HOOKS ZINC PLATED
318
DAN35505
DAN35506
DAN35507
Part No.
Size
Wire Dia.
DAN41705
DAN41710
DAN41715
DAN41720
DAN41725
%2
3/i6
%
5/16
3/a
.134
.192
.250
.313
.375
Inside Length
1
1%
13/4
F/a
2 23/64
Tel: 718-387-0300 • FAX: 718-387-1874
I.D.Eye
3/a
3/a
21;32
%
25
1 /32
PROOF COIL CHAIN
STRAIGHT LINK COIL CHAIN
~
Made from low carbon steel, Proof Coil Chain is a general utility chain for
such uses as log chain, cargo lashing chain, security chain, etc. Electrically welded links. Available in self colored or zinc plated finishes.
Part No.
PCC014S
PCC014Z
PCC516S
PCC516Z
PCC038S
PCC038Z
PCC012S
PCC012Z
Size
(in.)
Finish
V4
V4
*Work Load
Limit (Ibs.)
Feet/
Drum
1,175
1,175
1,750
1,750
2,450
2,450
4,250
4,250
800
800
550
550
400
400
200
200
Self Color
Zinc
Self Color
Zinc
Self Color
Zinc
Self Color
Zinc
5116
5116
3Ia
3Ia
1/2
V2
Straight link coil chain is a welded chain easily identified by its link design.
The link is long and relatively narrow in proportion. It is an excellent
choice for tailgates, trailer safety chain and barrier chain. IT IS NOT TO BE
USED FOR OVERHEAD LIFTING. All zinc plated.
Full Boxes Only
Part No.
Size
Wire Diam.
(in.)
Feet/Box
ASL2Z
ASL10Z
ASL20Z
ASL40Z
ASL50Z
2
1/0
2/0
4/0
5/0
.148
.177
.192
.218
.250
100
100
100
100
100
TENSO CHAIN
STRAIGHT LINK MACHINE CHAIN
Twin Loop
Short link electrically welded chain for general use where strength,
compactness and smoothness are desired and extra flexibility is needed.
Generally used for such purposes as overhead door chains, tailgate
chains and numerous other uses. All zinc plated.
A weldless chain that combines strength, flexibility, light weight and neat
appearance. It is an all purpose chain for a wide variety of uses including
swing sets, animal chains and hammocks. Note: It is recommended that
no twin loop chain smaller than 1/0 be used for swing sets. All zinc plated.
Full Boxes Only
Full Boxes Only
Part No.
Size
ASM02Z
ASM03Z
ASM10Z
ASM20Z
ASM40Z
ASM50Z
#2
#3
1/0
2/0
4/0
5/0
Wire Diam.
(in.)
.135
.148
.177
.192
.218
.250
Feet/Box
100
100
100
100
100
100
Part No.
Size
Wire Diam.
(in.)
Feet/Box
ATC4Z
ATC3Z
ATC2Z
ATC1Z
ATC10Z
ATC20Z
ATC30Z
ATC40Z
4
3
2
1
1/0
2/0
3/0
4/0
.072
.080
.091
.105
.120
.135
.148
.162
100
100
100
100
100
100
100
100
TWIST LINK MACHINE CHAIN
This chain features a short twisted link for maximum flexibility and compactness. Used primarily on tailgates, agricultural implements and industrial equipment.
COPPER DIPPED SASH CHAIN
Full Boxes Only
Part No.
Size
Wire Diam.
(in.)
Feet/Box
ATM02Z
ATM03Z
ATM10Z
ATM20Z
ATM40Z
ATM50Z
#2
#3
1/0
2/0
4/0
5/0
.135
.148
.177
.192
.218
.250
100
100
100
100
100
100
Sash chain is a stamped, formed chain slightly stronger than jack chain. It
is used for operating heater controls on ducts and dampers, as well as
window sashes in double hung windows. Copper dipped finish .
Full Boxes Only
Part No.
ASC8C
Size
Material
Diam. (in.)
Feet/Box
8
.035
100
Tel: 631-242-8555 • FAX: 631-667-8869
319
GRADE 8 ALLOY LIFTING CHAIN
TlEDOWN CHAINS
Made from the highest quality Grade 8 heat treated alloy steel. Shot
blasted for a clean finish and coated with a rust inhibitor. All chain is proof
tested at the factory. Proof load is 2 times the working load.
Part No.
AC814
AC838
AC812
Size
(in.)
*Working Load
Limit (Ibs.)
Feet!
Drum
Grade 70 (Transport) yellow chromate. Used for higher work load limits.
Furnished with Grade 70 Clevis Grab Hooks.
%
3,500
7,100
12,000
800
500
300
NOTE: ONLY GRADE 70 TRANSPORT CHAIN AND HOOKS ARE APPROVED FOR INTERSTATE TRANSPORT.
3/8
1/2
*4 to 1 Design Factor
Part No.
TRANSPORT GRADE 70 CHAIN
This is special high carbon steel chain with increased hardenability and
improved resistance to wear which allows greater practical strength-toweight ratio. Ideal for truck load binding applications and for use in
towing, construction, logging and farm applications. Furnished zinc
plated with yellow chromate. chain is embossed with "7" at specified
intervals. WARNING: do not exceed work load limits. Not to be used for
overhead lifting.
Size
Work Load
Limit (Ibs.)
Weight
(Ibs.)
x 14'
x 16'
5/16 X 18'
5/16 x 20'
4700
4700
4700
4700
17
19
21
23
14'
6600
6600
6600
6600
25
28
31
34
TDC51614
TDC51616
TDC51618
TDC51620
5/16
TDC38140
TDC38160
TDC38180
TDC38120
3/8 X
5/16
3/8
x 16'
3/8
x 18'
x 20'
3/8
BINDER CHAINS
NOTE: DOT APPROVED FOR TRUCK TIE-DOWNS USED FOR INTERSTATE TRANSPORT.
Part No.
TGC14
TGC516
TGC38
Size
(in.)
Work load
Limit (Ills.)
Feet!
Drum
Used as load binder chains. Grade 70 (Transport) finished yellow chromate. Furnished with Grade 70 Clevis grab hooks.
1/4
3150
4700
6600
800
550
400
NOTE: ONLY GRADE 70 TRANSPORT CHAIN AND HOOKS ARE APPROVED FOR INTERSTATE TRANSPORT.
5/16
3Ja
Part No.
BC1420
BC51620
BC3820
GRADE 10 (TRANSPORT) CLEVIS GRAB HOOKS
Size
Work load
Limit (Ibs.)
Weight
(Ibs.)
% x 20'
20'
3/8 X 20'
3150
4700
6600
16
24
33
5/16 X
CROSBY SCREW EYE BOLTS
Forged steel quenced and tempered. Hot dipped galvanized.
For use with Grade 70 transport chain. These forged alloy products are
heat treated for greater strength.
Part No.
Part No.
CLA33014
CLA330516
CLA33038
320
Chain Size
(in.)
Max. Working load
limit (Ibs.)
3500
4500
7100
CLG275142
CLG275516214
CLG27538212
CLG27512314
CLG275584
Shank Dia.
and 19th.
Eye
%x2
x 2%
3/8 x 2112
1/2 x 3%
5/8 x 4
.50
.63
.75
1.00
1.25
5/16
880 MEEKER AVE • BROOKLYN, NY 1:1222
Tel: 718-387-0300 • FAX: 718-387-1874
I.D.
We la/1p;cate custom chain slingsl
WIRE ROPE SLINGS
Our custom chain slings are made with genuine Crosby grade 8 Alloy
sling components and grade 8 alloy lifting chain. All components are
readily available from stock so slings can be shipped within 24 hours. To
order determine chain size from chart below, number of legs required for
the application, and overall reach required. Or ask our knowledgeable
sales people for assistance.
Siegel Bros. can provide wire rope slings both ready made and made to order. But
most importantly, we can provide them ready to ship on a moment's notice. Simply
determine the type of sling you need, the diameter of wire rope and the length and
we'll do the rest. EIP rope for 15% extra strength is standard. Wire core resists
crushing.
CHOKER
VERTICAL
Type 1,1·l.L
TYPE CO
TYPESOS
TYPESOG
SINGLE LEG WITH
MASTER LINK EACH END
SINGLE LEG WITH
SLING HOOK
SINGLE LEG WITH
GRAB HOOK
8ASKET
Type 1·1-1.1.
Type 1·I·LT
2·LEG BRIDLE
TYPE 1·2·0H
3·LEG BRIDLE
TYPE 1·3-0H
6 X 19 EiP, iWRC
Single Part Slings
Capacity-Tons
Rope
TYPE DOS
TYPE DOG
TYPETOS
DOUBLE LEG WITH
SLING HOOKS
DOUBLE LEG WITH
GRAB HOOKS
TRIPLE LEG WITH
SUNG HOOKS
Dia.
(in.)
7/8
1
1%
TYPE TOG
TYPE OOS
TYPEOOG
TRIPLE LEG WITH
GRAB HOOKS
FOUR LEG WITH
SLiNG HOOKS
FOUR LEG WITH
GRAB HOOKS
1/4
%
1/2
%
%
7/8
90°
60°
2J d
45°
30°
~
~
3,500
6,100
4,900
3,500
7,100 12,300 10,000
7,100
12,000 20,800 17,000 12,000
18,100 31,300 25,600 18,100
28,300 49,000 40,000 28,300
34,200 59,200 48,400 34,200
60°
45°
7,400
15,100
25,500
38,400
60,000
72,500
.48
.74
1.1
1.4
1.3
2.0
2.9
3.9
2.5
3.2
3.9
5.6
1.7
2.4
2.5
4.0
5.1
6.4
7.8
11
7.6
9.8
12
5.6
7.2
9.1
15
20
24
111 EE384
111 EE386
111 EE388
111EE124
30°
1.1
:91
.65
1.7
104
1.0
2.5
3.4
4:4
: 5.5
6.8
9.7
2,0
1.4
, 1.7
, 2.6
:
10
15
3.8
4.8
5.9
8.4
4.1
4.3
6.9
20
26
31
16
21
26
11
15
18
9.7
13
16
2.5 ,: 6.6
3.2 : 8.3
3.9
7.6
9.8
:
12
.67
1.3
5.4
6.8
8.3
12
3.7
5.6
.82
.97
1.5
2.2
2.9
2:7. 1.9: 5.0
$.6
4.5
5;5
7,9
:
1.4
2.1
3.0
4.1
048
1.8
1;0 .74
1.~>, 1.1
2.5
2.0 "104
2,9
2A t.7
3,3 . 2A
3.5. 2;5
5:7 4.0
7:9·.·.• 5.6
10 7.2
13 9.1
Description
Size
%"x4'
Double
Double
Double
Double
3/8" x 6'
0/8" x 8'
1;2" x 4'
Loop Wire
Loop Wire
Loop Wire
Loop Wire
Rope
Rope
Rope
Rope
Sling
Sling
Sling
Sling
"6~~b'I~L~&¥-wir~'RopeS{Ir1~'".
5,200
10,600
18,000
27,100
42,400
51,300
Double!..:opp Wire RopeSlil'l~'··
Doublei;;popWire Hope SUng
[JClllbl_~LClClP,,!,!ire_.rqop~_~;I~r\_g.·'
111 EE588
111EE5810
111 EE5812
, ~
,
.65
1.0
1.4
1.9
Part No.
~ ~"~ d::l1flJ
9,100
18,400
31,200
47,000
73,500
88,900
Vert
2 legs
3 Legs
• 2 Legs-qhOker
Vert. Choker Basket. 60° 45° 30°' 60° 45° 30° :600 45° .300
Stock Sizes - On the shelf, ready to ship.
WORKING LOAD LIMITS - 4 TO 1 DESIGN FACTOR
TRIPLE AND QUAD. LEG
SINGLE LEG
DOUBLE LEG
Spectrum 8
AlioyChairn
Size
Multiple-Leg Slings
Capacity-Tons
'
%"x8'
5/8" x 10'
5/s"x 12'
Double Loop Wire Rope Sling
.....
Tel: 631-242-8555 • FAX: 631-661-8869
321
HEAVY DUTY NYLON WEB SLINGS
TO ORDER NYLON WEB SLINGS SPECIFY:
Nylon Slings are strong, lightweight and flexible. They
are highly resistantto alkalies, but should never be used
in acid conditions. They form easily around any surface
and are easy to inspect. Temperature limit is 200°F,
SUBJECT TO DAMAGE BY SHARP EDGES.
1. Sling type and part no.
2. Number of plys
3. Web width
4. Sling length (pull to pull)
When treated for abrasion, they have a stretch factor of
,,' 10%.
TYPE 3 .. 4
TYPE 6
:J
[
Type 3 - Flat Eye
Reverse Eye Sling
Superior durability. Wear pads cover all surfaces. Reversible eyes.
Part No.
~
w
Q.
z
0
~
Q.
0
;:
too
Sling
Width (in.)
Rated Capacities (Ibs.)
Basket
Vertical
Choker
RE1-802T
RE1-804T
RE1-806T
2
4
6
4,500
7,700
11,000
3,600
6,200
8,800
9,000
15,400
22,000
RE2-802T
RE2-804T
RE2-806T
2
4
6
6,500
13,000
20,000
5,200
10,400
16,000
13,000
26,000
40,000
Type 4 - Twisted Eye
Flat Eyes - Easier to remove from under loads. Twisted Eyes - Choke
better, nest better on crane hook.
TYPE 5
Endless
~
Q.
w
z
0
>-
...J
Q.
0
~
Web
Width (in.)
EN1-801
EN1-802
EN1-803
EN1-804
EN1-805
EN1-806
1
2
3
4
5
6
3,200
6,400
8,600
11,500
13,600
16,300
2,500
5,000
6,900
9,200
10,900
13,000
6,400
12,800
17,200
23,000
27,200
32,600
EN2-801
EN2-802
EN2-803
EN2-804
EN2-805
EN2-806
1
2
3
4
5
6
6,200
12,200
16,300
20,700
24,500
28,600
4,900
9,800
13,000
16,500
19,600
23,000
12,400
24,400
32,600
41,400
49,000
57,200
g
Q
Unilink Hardware Sling
~
w
z
0
~
Q.
0
~
322
~
Q.
0
~
Part No.
Web
Width (in.)
Vertical
Basket
Choker
EE1-801
EE1-802
EE1-803
EE1-804
EE1-805
EE1-806
EE1-808
EE1-810
EE1-812
1
2
3
4
5
6
8
10
12
1,600
3,200
4,800
6,400
8,000
9,600
12,800
16,000
19,200
1,250
2,500
3,800
5,000
6,400
7,700
10,200
12,800
15,400
3,200
6,400
9,600
12,800
16,000
19,200
25,600
32,000
38,400
EE2-801
EE2-802
EE2-803
EE2-804
EE2-805
EE2-806
EE2-808
EE2-810
EE2-812
1
2
3
4
5
6
8
10
12
3,200
6,400
8,600
11,500
13,600
16,300
19,200
22,400
26,900
2,500
5,000
6,900
9,200
10,900
13,000
15,400
17,900
21,500
6,400
12,800
17,200
23,000
27,200
32,600
38,400
44,800
53,800
Stock sizes - on the shelf-ready to ship.
Part No.
Hardware protects sling from rough crane hooks. Hardware can often be
reused, lowering replacement cost. Unilinks choke from either end.
Q.
z
0
Basket
Vertical
Choker
Part No.
TYPE U
~
w
Q.
Most versatile style sling. Shifting wear points can extend sling life.
:::--<»
(Q>?:
Part No.
Web
Width (in.)
Choker
Basket
Vertical
UU1-802
UU1-803
UU1-804
2
3
4
3,200
4,800
6,400
2,500
3,800
5,000
6,400
9,600
12,800
UU2-802
UU2-803
UU2-804
2
3
4
6,400
8,600
11,500
5,000
6,900
9,200
12,800
17,200
23,000
EE280204
EE280206
EE280208
EE280210
~:-",,:.
Size
2" X 4'
2" x 6'
2" x 8'
,2-:-,.",.,.x....~1".,O.~,.'_ •..,.,_ . . __ ...•._o"".'"
Two
Two
Two
Two
Ply Type 4
Ply Type 4
Ply Type 4
Ply Type 4
4"x 8'
4"x 12'
4" x 16'
4" x 20'
Two
Two
Two
Two
Ply Type 4
Ply Type 4
Ply Type 4
Ply Type 4
~~L-:~
EE280408
EE280412
EE280416
EE280420
Description
Tel: 718.. 387.. 0300 • FAX: 718.. 387-1874
':~~~
TIEDOWN RATCHET ASSEMBLIES
Ratchet buckle quickly tightens webbing around loads to avoid
load shift during transit. Four capacities available in two different
styles: Type A (Endless) has one length of webbing for bundling
loads together, Type B (Two Piece) is available with various end
fittings to secure loads to truck or trailer beds. Fixed length of
18".
TYPE A (Endless)
TYPE B (Two Piece)
SERIES 5000
SERIES 10,000
With Short Handle Ratchet
Working Load Limit -1650 Lbs. Breaking Strength - 5000 Lbs.
2" Wide Polyester Webbing
With Long Handle Ratchet
Working Load Limit - 3300 Lbs. Breaking Strength -10,000 Lbs.
Part No.
Length (ft.)
Description
Length (ft.)
27
30
61001
61002
27
30
Triangles
61003
61004
Snap Hooks
61005
61006
27
30
60501
60502
27
30
~
Flat Hooks
60503
60504
27
30
~
60505
60506
27
30
~
TYPE A
Endless
TYPE B
Two Piece
.~
Part No.
61011
61012
60517
60518
Description
TYPE A
Endless
TYPE B
Two Piece
~
Flat Hooks
27
30
c=
Triangles
27
30
~
Snap Hooks
SERIES 15,000
SERIES 1000
Working Load Limit - 5000 Lbs. Breaking Strength -15,000 Lbs.
Working Load Limit - 330 Lbs. Breaking Strength -1000 Lbs.
1" Wide Nylon Webbing
Part No.
60107
Length (ft.)
10
Description
TYPE A
Endless
TYPEB
Two Piece
60101
10
~
Wire U Hook
60103
10
~\
Open Hook (Vinyl
Coated)
60105
~
10
"
Hook & Keeper
Part No.
27
30
61502
61503
27
30
61504
61505
61508
61509
61501
Description
Length (ft.)
61512
61513
TYPE A
Endless
TYPEB
Two Piece
~
Flat Hooks
27
30
~-=-
Forged Triangles
27
30
@i3§:~~
Chain Anchor
Extension Handle for 3" Ratchet
.
Tel: 631-242-8555 • FAX: 631-667-8869
323
MANILA ROPE
Nylon is one of the strongest, most elastic rope
fibers available. It provides excellent shock absorption, withstanding dynamic loads that would break
other ropes. Nylon shows excellent resistance to
abrasion, rot, mildew, marine growth, petroleum
products and most chemicals.
Manila rope is one of the staples of the industry. It is used extensively in marine,
agriculture, trucking, construction and petroleum exploration industries, and is a
good all-purpose rope.
Full COils Only
Full Coils Only
Part No.
Part No.
Tensile
Strength
Size
1/4"
3/8"
MAR014
MAR038
MAR012
MAR058
MAR034
MAR100
MAR14100
MAR38100
MAR12100
540
1215
2385
3960
4860
8100
540
1215
2385
V2"
%"
3/4"
1"
V4"
0/8"
1/2"
Working
load
Ft.
Per Coil
1200
600
600
600
600
600
100
100
100
41
122
264
496
695
1160
41
122
264
Size
eir.
Dia.
(in.)
NYR014
NYR038
NYR012
NYR058
NYR034
NYR100
%
%
3fs
1V8
1V2
1/2
2
2%
3
5/8
3f4
1
Tensile
Strength
(Ibs.)
Working
Load
(Ibs.)
Ft.
Per
Coil
1490
3350
5750
9350
12800
22500
124
278
525
935
1420
2500
1200
600
600
600
600
600
MASON TWINE
POL¥PROPYLENE ROPE
Polypropylene rope is inexpensive compared to
other lines, light weight, and floats and is available
in a wide range of sizes and constructions. Polypropylene has elasticity midway between manila
and nylon, will not absorb water and is not affected
by mildew, mold, marine growth or most chemicals.
It is ideal for general marine use, electrical contracting and public utilities.
Full Coils Only
Size
Dia.
(in.)
Part No.
POR014
POR038
POR012
POR058
POR034
PORi 00
Cir.
%
3f4
3fs
V2
1'/a
1%
2
2%
3
%
3f4
1
Ft.
Tensile
Strength
(Ibs.)
Working
load
(Ibs.)
Per
Coil
1130
2430
3780
5580
7650
12600
113
244
420
950
1090
1800
1200
600
600
600
600
600
Used primarily by Masons in conjunction with line levels for accurate leveling of
masonry work. Nylon Mason Twine offers added resistance to breakage from
abrasion.
Part No.
Description
Ft./Roll
Roli/#24 Mason Twine
250' Roll/Nylon Mason Twine - White
250' Roll/Nylon Mason Twine - Yellow
TWN1000
TWN2000
TWN2001
280
260
260
SISAL TWINE
Great all purpose cord for tying, wrapping, binding and many other jobs.
MERRILL-O'BRIAN DRUM DEHEADER
Part No.
Description
SITW12
Sisal Twine, '/2 lb. Ball
NYLON SASH CORD
Quickly cuts the heads out of steel drums without leaving dangerous edges. All
parts are drop forged and heat treated. High grade alloy blade and fulcrum are
detachable and replaceable. To make the initial cut easier, the tool has a point in the
rear and a striking surface in the front.
Part No.
MER138
MER139
Description
Deheader with alloy blade
Deheader with non-sparking blade
,
,
324
Length (in.)
Wt. (Ibs.)
24
24
5V2
5V2
-
Part No.
Description
Length
ft.
NYSACO
SAC010
SAC08
#10 Nylon Sash Cord
#10 Cotton Sash Cord
#8 Cotton Sash Cord
100
100
100
~
-
,
Tel: 718-387-0300 • FAX: 718-387-1874
HILMAN ROLLERS NO.2 SERIES FLAT TOP ROLLERS 15 TONS OR LESS CAPACITY
The NO.2 series Flat Top Rollers have a recommended maximum load-carrying capacity of 15 tons,
per set of four. The overall height of these models ranges between only 3%" to 41/8". These roller units
are virtually maintenance free, and built to last a lifetime. They're ideal for moving machine tools
weighing up to 15 tons, heavy cargo, and any such equipment.
Part No.
HIL375SLD
HIL375SD
HIL375RD
Type
Swivel/Lock
Swivel
Rigid
Capacity
U.S. Tons
Ea.
Set/4
Hgt.
(in.)
Width
(in.)
length
(in.)
3.75
3.75
3.75
4%
4%
41/16
5%
5%
5%
10
10
10
15
15
15
NO.4 SERIES FLAT TOP ROLLERS 30 TONS OR LESS CAPACITY
This NO.4 series Flat Top Roller is the next step up from the NO.2 series. Its maximum recommended
load carrying capacity is 30 tons, per set of 4. With 100% increase in capacity, the overall heights
range from only 3%" to 4%". The NO.4 series is very popular for the moving of heavier machine tools
and equipment. The framework on all models in this series is a high carbon steel that is easily
weldable for simple or sophisticated modification.
Part No.
HIL75SLD
HIL75SD
HIL75RD
Type
Swivel/Lock
Swivel
Rigid
Capacity
U.S. Tons
Ea.
Set!4
7.5
7.5
7.5
Hgt.
(in.)
30
30
30
Width
(in.)
Length
(in.)
5%
5%
5%
101/2
101/2
101/2
NO.5 SERIES FLAT TOP ROLLERS 80 TONS OR LESS CAPACITY
An extra roll on the floor, a wider roller chain and a special high tensile alloy steel frame combine to
give the No.5 series a maximum dynamic capacity of 60 tons, per set of four. The height of these
rollers ranges from only 4" to 4%", with a roll width of only 4", making these the most favorable of all the
"smaller" capacity Flat Tops in terms of bearing area.
Part No.
HIL15SLD
HIL15SD
HIL15RD
Type
Swivel/Lock
Swivel
Rigid
Capacity
U.S. Tons
Ea.
Set!4
Hgt.
(in.)
15
15
15
4%
4%
4%
60
60
60
Width
(in.)
length
(in.)
12%
12%
12%
COMPLETE RIGGERS' SETS 3 ION CAPACITIES
Move loads up to 3 tons with Hilman Rollers' endless "chain track" with these 3 ton Riggers' Sets.
Features include:
• Fully guaranteed· Built tough· Minimum maintenance' Rubber padded top simplifies moving
metal based equipment "Improved scoop steering handle· All-steel parts ease modification· Low
center of gravity design· Removable triple-strength chain track
Part No.
HILK3RS-4
HILK3RS22
Description
3-ton Riggers' set with 4 swivel rollers, two 14" kit size scoop handles,
carrying case
3-ton Riggers' set with 2 swivel rollers, 2 rigid rollers, two 14" kit size scoop
handles, carrying case
COMPLETE RIGGERS' SETS STUN CAPACITIES
With all the quality features of the 3 ton Riggers' sets, the all new Hilman 8 ton Riggers' sets are
perfectly sized for a wide variety of "heavier" weight moving projects. Move up to 16,000 pounds like a
feather! Full directional capability, including tight turns in tight spots.
Part No.
HILK8RS4
HILK8RS22
J.
Description
8-ton Riggers' set with 4 swivel rollers, two 30" connector steering handles
and steel carrying case
8-ton Riggers' set with 2 swivel rollers and 2 rigid rollers, two 30" connector
steering handles and steel carrying case
I
~
•
1 SOU1JH SECOND ST. • DEER PARK, NY 11729
Tel: 631-242-8555 • FAX: 631-667-8869
325
~SlMPLEXr
~SlMPLEXr
RATCHET LEVER JACKS
HEAVY DUTY HYDRAULIC HAND JACKS
These jacks are especially suited for
moving machinery, lifting or skidding construction equipment, and
railroad bolster and coupler repair.
Housing for all models, except
TKA1022 are constructed of malleable iron. Model A1022 has a lightweight aluminum housing (42 Ibs.
total weight) for maximum mobility.
TK85A
TKA1022
Cap'y
(Tons)
Stroke
(in.)
Cap. Min.
Ht. (in.)
Toe Min.
Ht. (in.)
Wi.
(Ibs.)
TK84A
TK85A
TK86A
5
5
5
7
10
13
14
17
20
13/4
1%
1%
28
30
35
:TK22
TKtQ17
TKA1022
10
10
10
12%
91,12
21114
12
17
201/2
2%
1%
2
65
40
42
TK24A
TK2029
15
20
13
18
23114
281/4
2114
21/4
93
104
Part No.
• One piece drop forged bases and rugged welded
construction
• Operates horizontally with the pump handle turned up
• All models include over-travel protection
• Grooved saddles help prevent load slippage
• All models comply fully with ASME/ANSI B30.1 safety
standards
• 2-12 ton models include screw extensions
• low profile models are available for use in close quarters
• Plungers are chrome plated to resist corrosion
• All models are fully repairable
These workhorses are ideal for use in general industrial applications, automotive
maintenance, construction and material handling in shops, factories, oil fields and
mines.
Part No.
Cap'y
(Tons)
TKHJ2
TKHJ3
TKHJ5
TKHJ8
TKHJ12
TKHJ22
2
3
5
8
12
22
Closed
Hi.
(in.)
Stroke
(in.)
Exten.
Screw
Hi.
(in.)
Max.
Ht.
(in.)
7%
71/2
7 7/8
7 7/8
91/2
10%
139116
14%
15%
15%
18'/2
17
~
LEVER BARS
HYDRAULIC PUMP AND CYLINDER SETS
A
B
Lever bars used to give additional leverage when used with ratchet
lowering jacks. Also can be used to help position loads and in general
material handling applications.
Part No.
Key
length (in.)
TK10640
TK10665
TK10675
A
B
B
36
60
72
FORCE-PAK Pump and Cylinder sets have been carefully matched to provide
maximum efficiency and service-life. All sets come complete with 6-foot high
pressure hydraulic hose equipped with % NPT quick-disconnect couplings. All
cylinders are solid spring return type. See below for complete cylinder and pump
specifications.
Cylinder Specs.
Part No.
TKFPS102
TKFPS106
TKFPS1010
TKFPS256
TKFPS2514
TKFPS506
~
SUPERJACKS
Low profile jacks for fast lifting, support,
and exact leveling of heavy loads. Widely
used for bridge, tank, structural steel work,
Ship building and all industries where powerful, all-position jacks are required.
The T-K superjack is so rugged it carries an
exclusive five-year warranty.
Part No.
TK2510B
TK5010B
326
Cap'y
(Tons)
Min. Ht.
(in.)
Stroke
(in.)
Handle
Effort/Ton
(Ibs.)
Wi.
(Ibs.)
25
50
10114
105116
5
4
6
4
38
75
Consist of .(ltem Nos.)
Cylinder
Hose
Pump .... ·
TKRP3A
TKRP3A
TKRF'3A
TKRP3A
TKRP6BR ..
TKRP6BR
TKHSR102T
TKHSR106T
TKHSR1010T
TKHSR256T
TKHSR2514T
TKHSR506T
TKRP~C8
TKRP3C8
TKRP3C8
TKRP3C8
TKRP3C8
TKRP3C8
Cap'y
(Tons)
Closed
Ht. (in.)
Stroke
(in.)
10
10
10
25
25
50
425/32
2Va
6Va
10%
6%
14%
6'/4
9 314
133/4
100/.
183/4
11%
This is the quality floor leveling and support system you can count on.
Some of the features you'll find on these posts include:
• Heavy duty plates, top and bottom, two holes provided for rigid
anchoring
• 6" cold drawn screw with 4%" length deep v rolled thread tested and
proven to be 30% stronger; nipple at top of screw engages hole of
top plate to give positive anchoring
• Heavy cast collar with shoulder provides sure grip on inside of tubing
• Twin swedge pins provide 200% extra bearing strength and positive locking
• long turning handle provided - insures fast, easy adjustment
Part No.
TEliT
Capacity (Ibs.)
Min. Ext.
Max. Ext.
16,500
12,400
880 MEEKER AVE • l)ROOKLYN, NY 11222
Tel: 718-387-0300 • FAX: 718-387-1874
Adjustment
Capacity
4'9"- 8'4"
~IUMPLEXr
HYDRAULIC SOLID SPRING RETURN
CYLINDERS
Single acting, all position Force-Pak cylinders are
excellent for general purpose applications. Select
the stroke and capacity to fit your specific needs.
Five to 25 ton models are equipped with two base
mounting holes. Plungers are bronze plated to help
protect against off-center stresses.
Part No.
TKHSR102T
TKHSR106T
TKHSR108T
TKHSR256T
TKHSR252T
TKHSR506T
HIGH PRESSURE HYDRAULIC HOSE ASSEMBLIES
Cap'y
(Tons)
Closed
Ht. (in.)
Stroke
(in.)
Pump Res.
Req'd/Cyl.
(cu. in.)
Oper. Press
atCap'y
(Ibs./in.)
10
10
10
25
25
50
42%2
93f.1
11%
10%
6'h
111;8
2 'fil
6 'fil
8
6'/4
2
6V4
4.8
13.7
18.0
32.2
10.3
69
8,945
8,945
8,945
9,700
9,700
9,054
This high-pressure industrial grade hose has two-wire braid construction
which is rated at 10,000 psi operating pressure with a minimum burst
pressure of 30,000 psi.
All hoses have a 0/8 inch 1.0. with 3/8 male NPTF connections. Spring
guards are included as standard equipment. Special lengths available
upon request.
Hose i.D.
(in.)
Part No.
TKRP3C8
Model RP3A, with reservoir
operating pressure of 10,000
PSI pressure relief valve
HYDRAULIC HAND PUMPS
These lightweight, piston-type pumps are completely portable. Easily
mounted in confined areas. They can be operated vertically or horizontally. Full 1 year warranty.
Part. No.
Usable
Reservoir
Cap'y
(cu. in.)
Oper. Press
(PSI)
TKRP3A
70
10,000
Stroke
(in.)
length
(ft.)
Equipped with
Coupler
8
TK18213
Need specialized lifting equipment?
We can design systems to lift up to
500 Tons!
Vol/Stroke
(cu. in.)
0.15
il-
LIQUID FILLED GAUGES & GAUGE ADAPTERS
A
These gauges are furnished with Y4" NPTF male bottom connections. They are
liquid filled to dampen needle vibration and are calibrated to 10,000 PSI with the
10,000-15,000 PSI range shown as a warning zone. The gauge adapter is recommended for use with these gauges and gives sufficient length to provide clearance
for the 3W' diameter gauge.
Part No.
Description
TK18906
TK18977
liquid Filled Gauge
Gauge Adapter
Calibrated
Range
(PSI)
Face
Dia.
(in.)
0-10,000
31h
B
c
D
HIGH FLOW HYDRAULIC COUPLERS
These premium grade couplings provide maximum fluid flow and are plated to
resist corrosion. Cylinder Half Gouplings have male 3fa" NPTF threads, Hose Half
Couplings have female W' NPTF threads.
Part No.
Key
TK18209
TK18211
TK18213
TK18215
A
B
C
D
Description
Complete Coupling
Cylinder Half Coupling w/Dust Cap
Hose (Male) Half Coupling Female Threads
Dust Cap for Hose Half
Tel: 631-242-8555 • FAX: 631-667-8869
327
,
HYDRAULIC HAND PALLET TRUCKS
These hydraulic hand pallet trucks are designed to meet the everyday requirements of the busy warehouse.
The heavy duty steel frame is constructed to withstand years of continuous use. All pallet trucks listed below
carry a 1 year limited warranty and can be serviced by anyone ofthe authorized service centers throughout
the United States.
Standard Features:
• Touch control neutral lever
• Lifetime lubricated parts
• Melamin resin color coating for a durable finish
• Automatic-return handle assumes upright position when work is done
• Unique oil pressure pump with load limiter
• Urethane rubber coated steel wheels for smooth operation
Part No.
Cap'y
(Ibs.)
Wi
W2
L1
L2
JET140044
JET140042
JET140040
5,000
5,000
5,000
27
27
27
6
48
42
36
15
15
15
6
6
Dimensions (in.)
H2
Hi
77/e
77/8
77/e
3Ve
3Vs
3Ve
A
B
Ship. Wi.
(Ibs.)
7x2%
7x23J4
7x2%
3V2 x 27/8
3'/8 x 27/8
3'/e x 27/8
195
182
173
MANUAllY OPERATED LifTS
1,000 LB. CAPACITY-FOOT PEDAL OPERATION
The utmost in versatility atthe most economical price. Compact to fit through standard doors and to perform
in highly congested areas, these foot operated lifts are designed to handle all types of lifting tasks from
transporting dies and molds to stacking skids and pallets.
Lift
Ht. (in.)
Cap'y
(Ibs.)
Part No.
Low'd
Ht.(in.)
Ht.
O'all Dimensions (in.)
Width
19th.
5%
5%
5%
66
80
92
26
26
26
5114
5%
5%
66
80
92
3V4
3%
3%
66
80
92
Base Legs
1.0.
0.0.
Ship
Wt.(lbs.)
38
38
38
15
15
15
21
21
21
230
250
270
27
27
27
42
42
42
15
15
15
21
21
21
300
320
340
32
32
32
49
49
49
26
26
26
32
32
32
330
350
370
PLATFORM SERIES (24"Wx24"L)
LEC152
LEC166
LEC178
1,000
1,000
1,000
52
66
78
ADJUSTABLE 25" FORKS (NON"STRADDLE)
1,000
1,000
1,000
LEC252
LEC266
LEC278
52
66
78
ADJUSTABLE 30 u FORKS (STRADDLE)
LEC452
LEC466
LEC478
50
64
76
1,000
1,000
1,000
All prices FOB shipping point.
BAYIERY OPERATED LIFTS
A safe, efficient, higly dependable general purpose stacker. Powered by a heavy duty 12 volt battery and
operated with a hand throttle for easy lifting and controlled lowering of loads up to one ton. All steel welded
construction and heavy duty hydraulic system allows you to load and unload trucks, and to move large bulky
crates with ease.
Lift
Ht. (in.)
Cap'y
(Ibs.)
Part No.
Low'd
Ht. (in.)
Ht.
O'all Dimensions (in.)
Lgth.
Width
5%
5%
5%
66
80
92
24
24
24
5'14
5 1/4
5'14
66
80
92
80
92
104
Base Legs
1.0.
0.0.
Ship
Wt.(lbs.)
41
41
41
15
15
15
21
21
21
400
420
440
27
27
27
45
45
45
15
15
15
21
21
21
450
470
490
32
32
32
54
54
54
26
26
26
32
32
32
580
605
630
PLATFORM SERIES (24"W x 24"L)
LEC552
LEC566
LEC578
1,000
1,000
1,000
52
66
78
ADJUSTABLE.?5" FORKS(NO.N~STRAODLE)
1,000
1,000
1,000
LEG652
LEC666
LEG678
52
66
78
AOJUSTAEiLI:30" FORKS (STRADDLE)
LEG862
LEC874
LEC886
1,000
1,000
1,000
62
74
86
All prices FOB shipping point.
"
328
I
t
"
"
~
"
Tel: 718-387-0300 • FAX: 718-387-1874
,
5
-
"~~,
..
I
_
I
'"I
v
-
~
~
_
...
\.-
,
-.,
< I
~
1
DUAL HANDLE STEEL HAND TRUCKS
800 LB. CAPACITY FRAME
'\
SERIES 20 DUAL HANDLE, STAIR GLIDES, "TRI-HOl"
AXLE BRACKET WITH "D-LOK" AXLE
20 Series
Dual Handle
800 lb.
Capacity
Frame
10/1 x 2.75/1 Solid Rubber
8/1 x 1.62/1 Molded-on Rubber
Height
(in.)
Width
(in.)
Part No.
600
800
49
49
20
20
HAR5060
HAR5077
Part No.
HAR5660
10"
x 2.75"
Solid Rubber
Truck
load
Cap. (los.)
Height
(in.)
Width
(in.)
600
50
18
Wheel Dia.
TypeofTire
10" x 2.75/1 Solid Rubber
8/1 x 1.62" Molded-On Rubber
Truck
l.oad
Cap. (Ibs.)
Height
(in.)
Width
(in.)
500
500
46
46
20
20
SERIES 51 DUAL HANDLE, DUAL HOLE AXLE BRACKET
WITH D-LOK AXLE
• 8-ga. Harper-Loy toe plate with machine beveled edge
and rounded corners to slide under the load easier
• 5/8" "D-Iok" axle, unichrome plated to resist rust
• Concave steel strap inner frame allows cylindrical object
handling
• Three point axle to frame construction assures maximum
load strength
• Phosphate-coated, rust-resistant frames finished with
scratch resistant, high gloss electrostatically applied
powder coat, oven baked, Harper Green
Dual Handle
400 lb. Capacity
Part No.
Wheel Dia.
Type otTire
Height
(in.)
Width
(in.)
HAR5186
10" x 2" Solid RUbber
451/4
19
CONTINUOUS HANDLE MEDIUM DUTY STEEL HAND TRUCKS
DUAL HANDLE ALUMINUM WELDED HAND TRUCKS
800 LB. CAPACITY
~
SERIES 50 DUAL HANDLE, STAIR GLIDES, "TRI-HOl"
AXLE BRACKET WITH "D-LOK" AXLE
• Dual handle for safe control of load
• Heavy dUty 1" 0.0. x 14-ga. tubular steel frame robotically
welded for years oftrouble free service
• 8-ga. Harper-Loy steel toe plate with machine beveled
edge and rounded corners to slide under the load easier
• Concave steel strap inner frame allows cy[indrical object
handling
• "Tri-hol" axle bracket for choice of 6", 8", or 10" wheels
• %" "-10k" axle, unichrome plated to resist rust
electrostatically applied powder coat, oven baked,
Harper green
DUAL HANDLE MEDIUM DUTY STEEL HAND TRUCKS
SERIES 56 CONTINUOUS FRAME, lOOP HANDLE,
STAIR GLIDES, "TRI-HOl" AXLE BRACKET WITH
"D-LOK" AXLE
• Loop Handle offers push, pull, or lift option to operator
• Heavy duty 1/1 0.0. x 14-ga. tubular steel frame robotically
welded for years of trouble free service
• W' Harper-Loy steel toe plate with machine beveled edge
handling
• "Tri-hol" axle bracket for choice of 6",8", or 10" wheels
• %" "D-Iok" axle, unichrome plated to resist rust
Harper green paint
Wheel Dia.
Type otTire
50 Series
Dual
Handle 500
lb. Capacity
Frame
Truck
l.oad
Cap. (Ibs.)
CONTINUOUS FRAME STEEL HAND TRUCKS
56 Series
Continuous
Frame 800
lb. Capacity
Frame
"
• Dual handle style for controlling load with both hands
• Heavy duty 1" 0.0. x 14-ga. tubular steel frame robotically
welded for years of trouble free service
• Y4" Harper-Loy steel toe plate with machine beveled edge
handling
• "Tri-hol" axle bracket for choice of 6", 8", or 10" wheels
• %" "D-lok" axle, unichrome plated to resist rust
Harper green paint
Wheel Dia.
Type of Tire
Part No.
HAR2060
HAR2077
DUAL HANDLE STEEL HAND TRUCKS
SERIES 55 CONTINUOUS HANDLE, DUAL HOLE AXLE
BRACKET WITH "D-LOK" AXLE
• 8-ga. Harper-Loy toe plate with machine beveled edge
• 5/a" "D-lok" axle, unichrome plated to resist rust
handling
• Three point axle to frame construction assures maximum
load strength
scratch resistant, high gloss electrostatically applied
powder coat paint
• Round Back Design Handles Round Objects
• Tubular reinforced side frames and curved square tube cross bars
• Dual handle design for easy handling
• Light weight for easy portability
Continuous Handle
400 lb. Capacity
Part No.
HARMKD77
J-
\
Wheel Size
Type ot Tire
Height
(in.)
Width
(in.)
Part No.
Wheel Dia.
Type otTire
Height
(in.)
Width
(in.)
8 X 15/8 Mold on Rubber
49
19%
HAR5586
10" x 2" Solid Rubber
451/4
19
,."
~
v
1 SOUTH SECOND ST. • DEER PA.RK, NY 8729
Tel: 631-242-8555 • FAX: 631..667-8869
329
ULTRA-LITE ALUMINUM HAND TRUCKS DUAL HANDLE DESIGN
- WITH INTERCHANGEABLE PARTS
"
DRUM DOLLIES
Drum dollies are available with steel or rubber wheel swivel casters. All units are of onepiece steel construction and are arc-welded
throughout. Drums sit on the underframe inside strong 3116" x 2" steel locating band.
Cross-straps are press-formed to fit together
so that the drum rests on a smooth, flat surface.
',\•.,;;;:..-='.:<::",,',\
11,\
r";"'l\~~
I
r
"'f
J!~!
G2DA12
Dual Handle
500 lb. Capacity
Wheel Size
Tire Type
Capacity
(Ibs.)
8" x 1.75" Solid Rubber
500
ULTRA-LITE ALUMINUM HAND TRUCKS CONTINUOUS HANDLE
DESIGN - WITH INTERCHANGEABLE PARTS
Scientifically designed aluminum extrusions
were selected as the material for these new UltraLite Hand Trucks because of its unique combinations of properties including a high strengthto-weight ratio plus exceptional corrosion-resistant characteristics. Due to the riveted construction, a full line of accessories are available and
can be added, removed or replaced at any time.
Replacement parts are predrilled and precision
matched and are consistent with industry standards allowing interchangeability of parts with
other brands. Call for complete catalog. Shipped
knocked down.
t
L :,
~~l
Wheel Size
Type of Tire
Drum
Cap'y
HAR8141
HAR8337
350
750
3" x 3;16 Rubber
3 x 1W' Rubber
55
55
0IQ:7"'~'
Part No.
·Il"
Capacity
(Ibs.)
TILTING DRUM RACKS
HARG2DA12
i
Part No.
Harper Tilting Drum Racks provide greater
safety when upending heavy drums of oil,
paint, fuel or other liquids for draining.
Drums are cradled in horizontal position
with bung drain 21" off floor. The basic
frame is welded into a strong, one-piece
.
construction from 1" 0.0. x 14-ga. steel
tubing. All models have "non-skid" features on front rockers to prevent
frame from sliding when drum is tipped.
Part No.
Wheel Size
Type of Tire
Load
Cap'y (Ibs.)
HAR8818
5" X 13/s" Solid Rubber
500
HARG2CA12
Wheel Size
Tire Type
Capacity
(Ibs.)
8" x 1.75" Solid Rubber
500
HAR7659
1,200
330
16
(
l
A
• Constructed of heavy wall square and round tube
• Adjustable and replaceable sliding chime hook for steel
or fiber drums
• Foot rest helps operator to position truck under drum
and eases the break-over
• Foot rest also is a safety device keeping load from falling
back on operator
• Series 76 has spring loaded device to help ease drum
onto toes and automatically returns truck to vertical
position when drum is disengaged
Load
Cap'y (Ibs.)
23
j
"DRUM N' BARREL" TRUCKS
Part No.
431h
HARPER WELDING CYLINDER TRUCKS
G2CA12
Continuous Handle
500 lb. Capacity
Part No.
Dimensions (in.)
L x H x W
Drum Height (in.)
HI.
Min.
Max.
(in.)
48
24
60
Width
(in.)
".
~".;
B
HARPER Welding Cylinder Trucks are built tough to stay on the job for
years.
A. This model features the dual handle design giving excellent control of
the loaded truck when used over rough floors and around construction sites. Features 18" x 2112" steel wheels.
B. This model features continuous handle design to carry a medium
oxygen and small acetylene cylinder combination. Tool box is standard equipment.
Key
Part No.
Wheel Dia.
and Type
A
HAR218-31
HAR214-27
HAR150-31
18" x 2112" Steel
14" x 2 Semi-Pneumatic
18" x 21/2" Steel
A
B
Tel: 718-387..0300 • FAX: 718..387..1874
Comb. Cyl.
Cap'y (in.)
23
23
17
STANDARD WOOD DOLLIES
CARPET COVERED ENDS
Long rails and end rails are full %" thickness
and are bullnosed on all inside edges for
comfort in handling. Carriage bolts on end
rails are counterbored below surface. Four
3" hard rubber swivel casters 840 Ibs. capacity.
Long rails are full %" thickness with bullnosed inside edges for comfort in handling.
End rails are extra wide for added durability.
Carriage bolts are counterbored below surface underneath the carpet. Four 3" hard
rubber swivel casters 840 Ibs. capacity.
Part No.
Size (in.)
DUR2460
DUR3080
24 x 16
30x 18
Part No.
Size (in.)
DUR2406
DUR3008
24x 16
30 x 18
FLUSH PLATFORM WOOD DOLLIES
Double thick (11/2") laminated long rails. All
carriage bolts are counterbored below the
surface. Step up style. Four 3" hard rubber
swivel casters, 840 lb. capacity.
Part No.
Size (in.)
DUR2416
DUR3018
DUR3624
24 x 16
30 x 18
36x24
SINGLE HANDLE PLATFORM TRUCKS
Heavy Duty Single Handle Platform Trucks
of We" thick kiln dried oak. Center and end
cross battens are bolted. 5" diameter caster
set is 1400 lb. capacity. Comes with single
rack handle.
SOLIO PLATFORM WOOD DOLLIES
......
• • ~..... p
~
Solid platform is of full %" thickness, Includes full 3/4" thick battens which are securely attached with countersunk screws
from the underside. All carriage bolts are
counterbored below the surface. Four 3"
hard rubber swivel casters, 840 lb. capacity.
Part No.
Size (in.)
DUR6140
DUR8100
DUR4230
24x 16
30 x 18
36x24
DOUBLE HANDLE PLATFORM TRUCKS
Heavy Duty Double Handle Platform Trucks
of 1VB" thick kiln dried oak. Center and end
cross battens are bolted. 5" diameter caster
set is 1400 lb. capacity. Double rack handles
standard.
Platform
Size (in.)
Part No.
CCP244861
CCP275461
CCP306061
CCP367261
24x48
27x54
30x60
36x 72
FOB Shipping Point
DUAL HAND TRUCK
'1.,.c .
Medium Duty Dual Hand Truck converts
from hand truck to platform truck in seconds.
8 gauge steel toe plate with machine beveled edge and rounded corners. Front
wheels are 8" x 1.75" solid rubber. Rear
casters are 3" x 13/16 rubber swivel type. Load
capacity is 350 Ib on 2 wheels or 500 Ibs on
4 wheels.
CCP244862
CCP275462
CCP306062
CCP367262
..
"'
\to'.
24x48
27x54
30x60
36x72
ALUMINUM DUAL PURPOSE TRUCK
Lightweight aluminum two wheel truck converts to large capacity platform truck in seconds. Large 10" x 3.5" pneumatic tires in
front for ease of handling heavy loads. 5" x
1.25 corded neopreen swivel casters in back
for maximum capacity. Handles 600 Ibs as
hand truck and 850 Ibs as platform trUCk.
~
is ;. .' .'
Platform
Size (in.)
Part No.
' ..
Part No.
Platform
Size (in.)
Weight
(Ibs.)
Part No.
Platform
Size (in.)
Weight
(Ibs.)
HAR1240
13 x 39
36
HAR1745
131/4 X 49112
49
Tel: 631-242-8555 • FAX: 631-667-8869
331
REGULAR DUTY CASTERS
GENERAL PURPOSE HAND TRUCK
Seasoned Oak with Steel Straps
An extremely popular truck considered an
essential tool in most shipping departments.
Unsurpassed for handling small lot merchandise, including round objects in stores, warehouses, manufacturing plants and bakeries.
It is lightweight and easy to carryon delivery
trucks. Features 6" x 1518" mold-on rubber
wheels.
SWIVEL TYPE
RIGID TYPE
Our swivel series casters features patented LOCK-WELD construction that provides
a welded steel structure with a holding area many times the cross section area of a
comparative king pin type caster. LOCK-WELD casters are guaranteed against
separation, unless the force exceeds the strength of the steel itself.
Part No.
O'AI!
Ht. (in.)
Frame
Top (in.)
46
20V2
F9215SRT
Nose
Width (in.)
Patented leg design adds strength and swiveling efficiency by dispersing shocks
and overloads over a greater portion of the ball raceway. Raceways are cold forged,
ball bearings and spanner bushings are hardened.
Cap'y
(lbs.)
Our rigid series features a rugged design that utilizes strength of girder-type
construction. Hardened steel spanner bushings lock legs securely in place.
600
Both series available with either cushion tread or semi-steel wheels, Other wheel
types available on request.
Wheel Dia.
(in.)
Part No.
WAREHOUSE TRUCK
Seasoned Oak with Steel StrapSj
O'AII Ht.
(in.)
Wheel
Type
Cap'y
(Ibs.)
.SWIVEL SERIES
F2121W
F212SR
F21251W
F2131W
F213SR
F2141W
F214SR
F2151W
F215SR
F2161W
F216SR
Widely regarded as one of the best trucks for
handling cartons and crates in stores, warehouses, freight terminals and industrial facilities. Eastern pattern with wheels placed outside truck frame. Features 8" x 2" mold-on
rubber on cast iron wheels.
2V2
2V2
2
2
2 '/2
3
3
4
3V.
3%
3%
5
5
6%
4
5
5
6
6
6V4
7V4
lV4
Semi Steel
Cushion Tread
Semi Steel
Semi Steel
Cushion Tread
Sem: Steel
Cushion Tread
Semi Steel
Cushion Tread
Semi Steel
Cushion Tread
125
85
200
300
125
400
200
500
240
650
350
Semi Steel
Cushion Tread
Semi Steel
Cushion Tread
Semi Steel
Cushion Tread
Semi Steel
Cushion Tread
Semi Steel
Cushion Tread
250
110
300
125
425
200
600
240
800
350
RIGID SERIES
Part No.
O'AII
Ht (in.)
Frame
Top (in.)
Nose
Width (in.)
51
F92722SRT
F31251W
F3125SR
F3131W
F313SR
F3141W
F314SR
F3151W
F315SR
F3161W
F316SR
Cap'y
(Ibs.)
3V4
2V2
2'h
3
3
4
4
5
5
6
6
3%
3%
3%
5
5
6'/4
6V4
7V,
7'/4
600
fAIRBANKS lEVER TRUCKS
Provide the mechanical advantage of great leverage for lifting heavy cases or crates, machinery,
die blocks, and other heavy units. Used by riggers,
truckers, freight handlers and stevedores.
4 WHEEL DRUM iRUC~(
4 Wheel Drum Truck features two 10" wheels
up front and two 5" wheels behind the frame
for effortless heavy load handling. Raised
loop handle assists in rocking the truck onto
the rear wheels for unbelievable ease in loading and unloading barrels on and off pallets.
Short wheel base make this the most maneuverable truck on the market. Front wheels are
10" x 2" mold-on rubber. Rear wheels are 5" x
15/8" mold-on rubber.
Part No.
O'AIi Ht.
Ht. (in.)
F9494RT
58
l'
Selected perfect grain seasoned oak handles,
rounded and smoothed. Beveled nose iron bolted
to oak handle, bolts countersunk flush with nose
iron surface.
Standard with semi-steel, plain bearing wheels.
Cap')!
(Ibs.)
24
"
16
Pari No.
FC60
FC72
1,000
Length
of
Hdle(in.)
Nose (in.)
Length
of Plate
(in.)
Cap'y
(Ibs.)
60
72
6
6
9
9
3,500
4,250
Width
at
"880 'MEEKER' Avi ~ BRl)'oKl0xcN, 'NY ll222
-
.
' Tel: 718-387-0300 • If.A!X: 71S-38'''l-JI874
332
,
1
T ' ) .
"
"
•
~". <',.
,
,~~,' ~ _':
p
"';
I
~
MOLD-ON RUBBER
MOLD·ON
SOUD RUBBER
RUBBER
Mold-on rubber tire on steel hub. 5fa" bore with
ball bearing and grease fitting. 13,4" hub width.
Part
No.
Diameter
HAR66W
6"
Tread
Width
Cap'y
(Ills.)
Bore
1W'
Part
No.
325
5/S"
Solid rubber tire on offset poly hub.
with ball bearing. 2%" hub width.
Mold-on rubber tire on steel hub. W' bore with
roller bearing and grease fitting. 23,4" hub width.
HAR59W
MOLD-ON
Diameter
Tread
Width
Bore
Cap'y
(Ibs.)
10"
21;2"
7/S"
790
Part
No.
bore
Diameter
Tread
Width
Bore
Cap'y
(Ibs.)
10"
23;4"
51a"
400
HAR60W
lERO PRESSURE
SOLID RUBBER
RUBBER
5/8"
Mold-on rubber tire on steel hub. 5/8" bore with
ball bearing and grease fitting. 2V4" hub width.
Part
No.
Diameter
Tread
Width
Bore
Cap'y
(los.)
6"
2"
5/S"
460
HAR63W
Solid rubber tire on poly hub. 5/a" bore with ball
bearing. 2V4" hub width.
MOLD·ON
Diameter
Width
Bore
Cap'y
(los.)
6"
2"
%"
250
HAR69W
RUBBER
Part
No.
Diameter
Bore
(ibs.)
8"
1%"
5/S"
450
HAR77W
Part
No.
MOLD ON
Diameter
Bore
(Ibs.)
6"
2"
O/S"
400
Cap'y
(Ibs.)
8"
13;4"
5/S"
175
Part
Tread
No.
SOLID RUBBER
RUBBER
Bore
Baloon rubber tire on offset hub. %" bore with
ball bearing. 2" offset hub width. Grease fitting
for lubrication.
Cap'y
Tread
Width
HAR11W
Tread
Width
BALLOON TIRE
Solid rubber construction with a hard core and
soft tread. 2%" Hub width. Oilite bearing.
Cap'y
Tread
Width
Diameter
HAR12W
SOUD !lmBIER
Mold-on rubber tire on steel hub. 5fa" bore with
ball bearing. 2" hub width. Grease fitting for
lubrication.
Part
No.
Tread
Part
No.
Zero pressure rubber tire on offset poly hub.
bore with oilite bearing. 1112" hub width.
5/8"
Diameter
Width
Bore
Cap'y
(Ibs.)
8"
2Y4"
51a"
450
HAR55W
PNEUMATIC
Mold-on rubber tire on steel hub. 5/a" bore with
ball bearing. 2V4" hub width. Grease fitting for
lubrication.
Part
No.
Diameter
Tread
Width
Bore
Cap'y
(11)5.)
10"
2"
%"
700
HAR62W
}
,
~
','_
-
,).
Solid rubber tire on offset poly hub.
with ball bearing. 2%" hub width.
Part
No.
Diameter
Tread
Width
HAR14W
..
-
-
'1
·.1
,.....
..~~
Pneumatic 2-ply tire on offset hub. 5;8" bore,
steel core, 2V4" offset hub width. Max inflation
301bs.
bore
Bore
Cap'y
(los.)
O/S"
400
'I~-
I,
5/8"
~y~"
Part
No.
HAR16W
I
Diameter
Tread
Width
Bore
Cap'y
(Ibs.)
10"
3%"
O/S"
260
"
>
~
,
r SOUTH SECONli st. '. DEER' BARK,
.'
NY 11729
Tel: 631-242-8555 • F:A.X]:" 631-667-8869
,
•
' . "
, I
"
• ,
.'
,":
,',',',',
': "
",.
"
"
'
,
'
1 '
333
,
SWIVELING ROUND EYE BOLT SNAPS
BREECHING SNAPS
Malleable iron construction, zinc plated finish.
Part No.
O'AII Lgth.
(in.)
Max. Opening
(in.)
COV423
COV424
COV425
COV456
Box
Qty.
20
20
20
20
SWIVELING ROUND EYE QUICK SNAPS
Malleable iron bolt snaps are zinc plated. Spring action snap with swivel
eye.
Part No.
Dimensions (in.)
ABC
Box
Qty.
WC22558
WC22534
%
4
4 1/8
10
10
5/8
3/8
%
RIGID EYE SINGLE SHEAVE PULLEYS
One piece, cast construction with triple copper/
nickel plating and solid brass sheaves.
Malleable iron construction with galvanized finish to resist rust. Swing
open latch for quick connection. Eye swivels 360°.
Part No.
Dimensions (in.)
ABC
3%
3%
4%
WC2511
WC2512
WC2513
Box
Qty.
10
10
10
RIGID ROUND EYE QUICK SNAPS
Part No.
WC017434
WC01741
WC0174114
WC0174112
WC01742
Sheave Dia.
(in.)
Eye Size
(in.)
Rope Dia.
(in.)
Box
Qty.
10
10
10
10
10
%
3/16
V4
1
7/32
%
%
5/16
15/32
V2
1V4
1V2
2
%
%
SWIVEL m SINGLE SHEAVE PULLEYS
One piece, cast construction with triple copper!
nickel plating and solid brass sheaves.
KEY
~
~
Malleable iron construction with galvanized finish. Swing open latch
allows quick connection.
Part No.
Dimensions (in.)
C
B
Part No.
A
WC2491
WC2492
WC2494
5/8
1V16
334
7/8
25;'16
3
41h
5/16
3/8
%
Box
Qty.
10
10
10
WC017334
WC01731
WC0173114
WC0173112
WC01732
Sheave Dia.
(in.)
Eye Size
(in.)
%
5/16
5;'16
1
1%
1V2
2
5/8
%
%
Tel: 718-387-0300 • FAX: 718-387-1874
Rope Cia.
(in.)
Box
Qty.
V4
10
10
10
10
10
5/16
3/8
%
V2

SPEED RAIL INSTANT STRUCTURE FITTINGS

Transcription

Similar documents

IBS Series - Wing Inflatables

Hear it. Taste it. See it. Touch it.

easyPilot Cobra™ Shootbolt

012602 Art. VESPINO

kik-step®

kik-step®

Proud to be IBS. - International Business School

Consenso Latinoamericano sobre Síndrome de Intestino Irritable

kik-step®

3000 series - Swivel Joints