Traxx Carpet Welding System

CARPET WELDING SYSTEM
“Don't just seal it—WELD IT!”
Using Fusion™
engineered carpet
welding products
from TRAXX
Extended lip guides
tip along carpet
backing better
Patented ball
check valve dispenses
just the right flow
and prevents dripping!
Push the gun away from
you applying a consistent
bead of adhesive along one
entire carpet edge. Repeat
on second carpet edge.
Rest lower lip of the Fusion™
Carpet Welding Tip along
edge of the cut carpet
backing. Press the gun’s
trigger to get a good bead
of adhesive to form.
During the normal seaming process, any iron will
automatically reactivate the
Traxx Engineered Glue Sticks.
Complete the weld by pinching the carpet edges together
immediately behind the iron.
The TRAXX Carpet Welding System is ENGINEERED to seal and weld
carpet edges to minimize or even eliminate seam peaking.
FOR BEST RESULTS USE WITH
STIXX™ Engineered Carpet
Glue Sticks
The result is not just edge or seam sealing but a true 'welding' effect,
re-activated from the iron's heat when the seam is performed!
...without Fusion™!
Use with TRAXX Engineered
Glue Sticks which have been
specially formulated to
reactivate and weld seams, and
contain a UV tracer for proofpositive compliance with CRI,
CFI and carpet manufacturer’s
Edge Securing standards.
Using Fusion™ from TRAXX
And, Introducing...
The new Fusion™ Engineered Seam Weight
from TRAXX for cooling and setting carpet seams
for a beautiful and virtually seamless installation!
THE WELDING SYSTEM PRODUCTS:
Fusion™ Carpet Welding Tip
TTX-6210
TRAXX 100-Watt Glue Gun
TTX-6100
Fusion™ Engineered Seam Weight
TTX-6220
Engineered Products. Professional Results.™
Rev. 9/13