Controller unit

ISO 9001:2008
V05EN
Index
The company
4
CM Series Engine Control Panel
CM 40 Series
CM 20/30 Series
CM 2A/3A Series
CM 02 Series
CM 60 Series
6
RA Series DIgital Instruments
RA10 Thermocouples reader
RA20 RPM Counter/working hours counter
RA40 Pressure and temperature reader
19
Wiper Control Units
Single wiper CT2NX
30
Wiper Controller Units
CT10 Series
CT20 Series
32
Intelligent Wiper Switch
Single wiper CT41 Series
Single wiper CT41P Series
Two wiperCT42 Series
Two wiper CT42P Series
Three wiper CT43P Series
36
Modular Wipers Control System
CTMOD Series
46
Accessories
48
the company
The company Pine s.r.l.
PINE S.r.l. was founded in
1993 introducing the first
microprocessor control integrated
system for marine diesel engine.
Our primary target is to
supply products designed
for nautical (military,
professional and leisure)
and industrial applications
able to satisfy reliability
and quality requirements
expected.
Technologically advanced
solutions, wide experience and
sector know-how, allow
to design marine application
systems, and on request, in
accordance with Marine Register
specifications.
Such prerogatives give the
possibility to get over a deeprooted wariness about electronics
diffused everywhere (from engine
manufactures to final customers),
entering in a market ruled only by
analogic instrumentation.
Thanks to a high level service,
reliability, quality and customer
service, PINE sells products
in the world wide market.
An assistance service based on
local Companies permits to help
customer on the first installation
and in the after market.
5
CM Series
Engine
Control
Panels
Engine Control Panels
General features
Bright led display visualization
Variable luminous intensity
High precision readings
Alarms management
Inputs adaptable to
any kind of transducer
Two or more panels can be
connected together in a “MasterSlave” configuration
Polarity inversion and wrong
cabling protections.
Complete
Supplied with starting switch,
fuse, buzzer and engine
push-Stop button.
Microprocessor based
A wide technology puts apart
common analog panels.
Reliable
Collision and vibration resistant,
insensible to humidity or sudden
change of temperature, panel is
protected by a polyester mounted
on an aluminium support.
Precise
Greater precision compared with
the analog instrumentation.
Flexible
Customizable configuration
to fit the panel for any kind
of engine, always giving
an effective protection.
7
O
OW
98
O
DOWN
185
8
N
Engine Control Panel CM 40 Series
Description
Digital control panel based on
microprocessor, fit for low power
engine where at least main
readings have to be monitored.
Ideal where space is one of the
most important needs.
Power supply
12 Vcc (CM41) 24 Vcc (CM42)
12 Vcc (CM41)
24 Vcc (CM42)
Visualization
4 led displayed measurements in a
single row:
• RPM
• Working hours
• Battery voltage
• Water temperature
5 warning lamps for signaling
and alarms.
Variable luminous intensity.
Size
185 x 98mm, 100 mm depth
On request
Automatic Stop enabled/disabled
by a panel front switch
Pre-heating management
Oil pressure or Fuel level instead
of Water temperature
Remote silencing input
Smart painted metal box , fixed
by four anti-vibrants.
12V version (CM41)
Power supply
Power Consumption
Protections
Working temperature
Storage temperature
Visualization
Warning lamps
Acoustic indication
Inputs
RPM measurement
Water temp. measurement
24V version (CM42)
12 Vcc min 6 V, max 15 V
24Vcc min 10 V, max 35 V
Less than 4 W
Polarity inversion, Battery disconnecting extravoltage (not repetitive)
-10°C/+60°C
-30°C/+70°C
One-row bright led display
High Water Temperature
Low Oil Pressure
Alternator
Preheating
Low Battery
Buzzer
2 analogs and 6 digitals
Alternator “W” contact
Veglia 40/120°C
85
81
168
CUTTING EDGE
170
DEPTH: 100mm
9
N
P
OP
P
N
W
U
N
O
DOWN
UP
118
120
224.0
CUTTING EDGE
228
DEPTH : 100mm
10
N
Engine Control Panel CM 20/30 Series
Description
Digital panel based on
microprocessor, it is the best seller
of the whole CM series family
It replaces the classical analog
panel reducing space trouble to
the minimum
Inputs compatible with the most
common commercial transducers
Acoustic alarms silenced by
a panel front key.
Power supply
12 Vcc (CM20)
Universal 12 / 24 Vcc (CM30)
Visualization
6 measurements led displayed
in three rows:
Power supply
Power Consumption
Protections
Working temperature
Storage temperature
Visualization
Warning lamp
Acoustic indication
Preheating time
(ref. to engine water temperature)
• RPM
• Working hours
• Water temperature
• Fuel level and reserve lamp
• Engine Oil pressure
• Battery voltage
• 7 warning lamps for signaling
and alarms
• Variable luminous intensity
to the engine water temperature
Two or more panels connected
together for a Multi-Station
control
Electronic control unit can
be supplied with or without
aluminium front panel
Smart painted metal box, fixed
by four anti-vibrants.
Size
246 x 138 mm, 100 mm depth.
Applications
Fit for mid-power engine
It represents the ideal solution
when all engine basic readings
have to be monitored
Panels can be placed on the ship
pilot bridge, on flying-bridge or
engine room.
On request
Automatic stop enabled/disable
by a panel front switch
Acoustic alarm remote repeating
Remote silencing input
Pre-heating management related
CM20 12 Vcc (min 6 V, max 15 V)
CM30 12/24 Vcc (min 10 V, max 30 V)
Less than 6 W
Polarity inversion, Battery disconnecting extravoltage (not repetitive)
-10°C/+60°C
-30°C/+70°C
3 rows bright led display and variable luminous intensity
High Water Temperature (ATA)
Low Oil Pressure (BPO)
Alternator (D+)
Preheating
Low Battery
Alarm1 (AL1)
Alarm2 (AL2 CM30 only)
Buzzer
0°C 15 seconds
20°C 10 seconds
40°C
7 seconds
> 50°C
0 seconds
-20 seconds without
transducer or negative
temperature
Engine revolution
Alternator “W” contact
Pick-up on crown wheel (by Pine adaptor)
Proximity switch (on request)
Water (oil) temperature
VDO 40 120°C
Veglia 40 120°C
Jaeger 40 120°C (on request)
0 20 mA or 4-20 mA (on request)
Oil pressure
VDO 0 10 bar
VDO 0 25 bar (on request)
Veglia 0 8 bar
Jaeger 0 10 bar (on request)
Jaeger 0 25 bar (on request)
0-20 mA or 4-20 mA (on request)
Level
Resistor type
Transdoucer type
11
Electronic unit only
12
Engine Control Panel CM 2A/3A Series
Description
Microprocessor based
programmable digital
control panel
It replaces the classical analog
panel reducing space trouble
to the minimum.
User adjustable pre-alarm an
alarm thresholds for each reading.
Automatic stop also available.
Power supply
12 Vcc (CM2A).
Universal 12 / 24 Vcc (CM3A)
Visualization
6 led displayed measurements in
three rows:
• RPM
Power supply
Power Consumption
Protections
Working temperature
Storage temperature
Visualization
Warning lamp
Acoustic indication
Preheating time
(ref. to engine water temperature)
• Working hours
• Maintenance / Oil change timer
Management
• Water temperature
• Fuel Level and reserve lamp
• Engine Oil pressure
• Battery voltage
• 7 warning lamps for signaling
and alarms
• Variable luminous intensity.
Size
246 x 138 mm, 100mm depth
On request
Acoustic alarm remote repeating
Remote silencing input
Pre-heating management related
to the engine water temperature
Two or more panels connected
together for a Multi-Station
control
Electronic control unit can
be supplied with or without
aluminium front panel
Smart painted metal box, fixed
by four anti-vibrants.
Applications
Fit for mid-power engine
It represents the ideal solution
when all engine basic readings
have to be monitored.
Panels can be placed on the ship
pilot bridge, on flying bridge or
engine room.
CM2A 12 Vcc (min 6 V, max 15 V)
CM3A 12/24 Vcc (min 10 V, max 30 V)
Less than 6 W
Polarity inversion, Battery disconnecting extravoltage (not repetitive)
-10°C/+60°C
-30°C/+70°C
3 rows bright led display and variable luminous intensity
High Water Temperature (ATA)
Low Oil Pressure (BPO)
Alternator (D+)
Preheating
Low Battery
Alarm1 (AL1 CM3A only)
Buzzer
0°C 15 seconds
20°C 10 seconds
40°C
7 seconds
> 50°C
0 seconds
-20 seconds without
transducer or negative
temperature
Engine revolution
Alternator “W” contact
Pick-up on crown wheel
Proximity switch (on request)
Water (oil) temperature
VDO 40 120°C
Veglia 40 120°C
Jaeger 40 120°C (on request)
Caterpillar (on request)
0 20 mA or 4-20 mA (on request)
Oil pressure
VDO 0 2 bar
VDO 0 5 bar
VDO 0 10 bar
VDO 0 25 bar
Veglia 0 8 bar
Jaeger 0 10 bar (on request)
Jaeger 0 25 bar (on request)
0-20 mA or 4-20 mA (on request)
Level
Resistor type
Transdoucer type
13
O
O
O
OW
N
O
135
W
O
O
DOWN
DOWN
O
388
59
110
62
362
CUTTING EDGE
72
228
DEPTH : 100mm
14
72
N
Engine Control Panel CM 02 Series
Description
Totally programmable digital
control panel based
on microprocessor
User adjustable pre-alarm
and alarm thresholds for
each input
Automatic Stop enabled/disabled
by a panel front switch.
Power supply
Universal 12 / 24 Vcc.
Power supply
Power Consumption
Protections
Working temperature
Storage temperature
Visualization
Visualization
14 measurements led displayed
in six rows:
• RPM
• Working hours
• 8 analog readings
• Maintenance / Oil change timer
management
• One or two exhaust gas
temperatures
• 10 warning lamps for signalling
and alarms
• Variable luminous intensity
Size
388 x 136 mm, 100 mm depth
On request
Acoustic alarm remote repeating
Remote silencing input
Smart painted metal box, fixed
by four anti-vibrants.
Universal 12/24 Vcc (min 10 V, max 30 V)
Less than 10 W
Against polarity inversion and battery disconnecting extravoltage (not
repetitive)
-10°C/+60°C
-30°C/+80°C
6 rows bright led display and variable luminous intensity
High Water Temperature (ATA)
Al1
Warning lamp
Left panels
3 alarms
Al2
Al3
Low Oil Pressure (BPO)
Right panel
7 alarms
Alternator (D+)
Maintenance/Oil change
Preheating
Low Battery
Al
Acoustic indication
Thermocouple
Preheating time
Buzzer
K Type (Chrome – Aluminium) – J Type (Iron – Constantan)
0°C 15 seconds
20°C 10 seconds
40°C
7 seconds
> 50°C
0 seconds
-20 seconds without
transducer or negative
temperature
Engine revolution
Water (oil)
temperature
Transdoucer type
Alternator “W” contact
Pick-up on crown wheel
Proximity switch (on request)
VDO 40 120°C
Veglia 40 120°C
Jaeger 40 120°C (on request)
Caterpillar (on request)
0 20 mA or 4-20 mA (on request)
Oil pressure
VDO 0 2 bar
VDO 0 5 bar
VDO 0 10 bar
VDO 0 25 bar
Veglia 0 8 bar
Jaeger 0 10 bar (on request)
Jaeger 0 25 bar (on request)
Murphy 0 25 bar (on request)
0-20 mA or 4-20 mA (on request)
Level
Resistor type
Current output type
15
16
Engine Control Panel CM 60 Series
Features
CAN BUS SAE J1939 compliance
Modular system
Alarm repeater
Reader and alarm annunciator
Made in Italy
CM 61
Small and compact
Save dash board space
CM 63
All the features to better control
the engine
CM 62
Low cost engine control panel
Technical features
Power Supply
Nominal voltage: from 12 / 24 VDC
Range: min 10 VDC max 35 VDC
Power Consumption
(no load)
Less than 5 W / 10 W
Protections
Polarity inversion, Battery disconnecting extravoltage (not repetitive).
Temperature
WORKING TEMPERATURE
-20 +60 °C
STORAGE TEMPERATURE
-30 +80 °C
Relative Humidity
Max 95 %
Visualization
TRANSFLECTIVE LCD display 128 x 64 dots back light, sun light readable
Can Bus Interface
Messages SAE J1939 compatible
RS485 Interface
Connection to other panels - repeaters
Data Recording
All the engine events / alarms – download
on a PC
WARNING LAMP
“System ready” warning lamp Up to 16 warning lamps
ACOUSTIC SIGNALING
Internal buzzer
Engine Revolutions
Input
1 input from RPM sender
1 “input” from CAN BUS
SENDERS: Alternator “W”
Or - Pnp proximity sensor
Or - Pick-up on crown wheel
Analogue Inputs
10 analogue measures
5 ANALOGUE INPUTS
1 – 10 Input from CAN BUS
4 alarm set points
Alarm Inputs
16 alarm inputs
8 from external connections - N.C. or N.O.
contacts
1 - 16 from CAN BUS / Serial interface RS485
SYSTEM READY
Contact closed if READY
ALTERNATOR EXCITATION
Excitation current about 200 mA
5 OUTPUTS RELAY
PROTECTED by internal self-resettable fuse
(PTC) .
SIGNAL FOR EXTERNAL TACH
Settable for any RPM gauge / tachometer
Signallings
OUTPUTS
17
RA Series
D i g i t a l
Instruments
RA Series Digital Instrument
Microprocessor based
Designed to represent the ideal
solution in marine applications.
Compact
Many readings in a single
row led display, visualized by
automatic or manual swapping.
Versatile
Instruments are compatible
with either marine applications
transducers or the industrial ones.
General features
Readings visualization in a single
row bright led display
Variable luminous intensity
High precision readings
User adjustable thresholds alarm
Relay output pin for each alarm
External siren output
Universal power supply 12 / 24 Vcc.
Polarity inversion and wrong
cabling protections
Size 48 x 96 mm (DIN 43700) –
120 mm depth.
19
48
RA series
A1
A2
TYPE
B1
B2
MODE
AB
RPM
°C
AB
HOUR
°C
96
20
SET
SEL
RA Series RA 10 Thermocouples Reader
Applications
Fit for systems where high
temperatures have to be
monitored, such as the exhaust
gas ones.
Precise
Provided with a 12 bit A/D
converter, with adjustable
offset and slope (gain) for high
precision readings.
Alarms
The User adjustable alarm
thresholds indicate anomalies or
over-temperature situations for fast
maintenance intervention.
Visualization
Single row bright led display
with variable luminous intensity.
One temperature (RA11) or two
temperature with automatic or
manual swapping (RA12).
Temperature processing
Instruments can be set up to work
as thermostats.
Insensible to
Wiring electrical dispersion caused
by humidity or condensate.
Power supply
12/24 V d.c. (from 10 to 30 Volt d.c.)
Working temperature
From -5 up to 60°C
Thermocouple
K Type (Chrome - Aluminium) – J Type (Iron - Constantan)
Range of measure (K)
From 0 to 990°C
Range of measure (J)
From 0 to 750°C
Accuracy
+/-2°C for both thermocouple types
Resolution
1°C
Available alarms
Adjustable A1, A2 and B1, B2 thresholds, led signaling, buzzer,
external buzzer repeating
External siren output
SPOT type, Imax = 2 A res. / Vmax = 50 V
Plastic box
DIN 43700 - 48.0 x 96.0 mm - total depth: 120.0 mm
Cutting edge
45.0 x 91.0 mm
45
91
CUTTING EDGE
DEPTH : 120mm
21
48
RA series
A1
A2
TYPE
B1
B2
MODE
AB
RPM
HOUR
96
22
SET
SEL
RA Series RA 20 RPM Counter/Working Hours Counter
Applications
Fit for systems where high
precision engine revolutions
reading is required.
Input signal is provided by
alternator “W” contact or
comes from the most common
transducers such as magnetic
pick-up on crowned wheel or PNP
and NPN proximity switches.
Set-up
RPM calibration procedure is as
simple as intuitive.
The same is for the programmation
of all working parameters.
Visualization
Single row bright led display with
variable luminous intensity:
RPM, working hours.
User adjustable alarm thresholds,
maintenance or oil change timer
management.
Low RPM
Instrument can be set to read very
low RPM, displayed with a decimal
digit also.
Power supply
12/24 V d.c. (from 10 to 30 Volt d.c.)
Working temperature
From -5 up to 60°C
Range of measure
From 1 up to 50,000 RPM on 4 digits
Accuracy
<1 at 6,000 RPM (“rA” parameter set to 1)
Resolution
1 or 10 RPM, depending on “riS” parameter in SEt1
Max input frequency
5 KHz for PNP an NPN switch – 10 KHz for “W” 20 KHz for magnetic pick-up
Available alarms
User adjustable A1 and A2 thresholds, led signaling, buzzer, A1 alarm,
or buzzer repeating (A2 disabled)
Relay output
Spot type Imax = 2 A res. / Vmax = 50 V
Plastic box
DIN 43700 – 48.0 x 96.0 mm – total depth: 120.0 mm
Cutting edge
45.0 x 91.0 mm
45
91
CUTTING EDGE
DEPTH : 120mm
23
48
RA series
A1
A2
TYPE
B1
B2
MODE
AB
C∞
BAR
96
24
SET
SEL
RA Series RA 40 Pressure and Temperature Reader
Applications
Fit for systems where high
precision readings have to be
monitored, such as temperatures
or engine pressure. Input signals
can come from any kind of marine
transducer.
RA40 is also compatible with 4-20
mA standard.
Alarm thresholds
Two adjustable alarm thresholds
can be set for every reading. Alarms
remote repeating is also available.
Temperature and pressure
processing
Instrument can be set up to work
as thermostat and pressure switch.
Visualization
Two pressures or two temperatures,
or one temperatures, or one
temperatures and one pressure.
Power supply
12/24 V d.c. (from 10 to 30 Volt d.c.)
Working temperature
From -5° up to 60°C
Available alarms for each reading
User adjustable A1 and A2 thresholds, led signaling, buzzer, A1 alarm,
or buzzer repeating (A2 disabled)
External siren output
Spot type Imax = 2 A res. / Vmax = 50 V
Scale proportional regulation
Adjustable by set-up programmation for both readings up to +/ -25%
of default value
Plastic box
DIN 43700 – 48.0 x 96.0 mm – total depth: 120.0 mm
Cutting edge
45.0 x 91.0 mm
45
91
CUTTING EDGE
DEPTH : 120mm
25
40
109
58
40
Wiper Control
Units
191
178
4,5
191
178
10
58
Wiper Control Unit CT2 NX Series
M3
M2
Descriptions
CT62 is a very low-cost control
system fit for two wipers.
It includes all functions necessary
for windscreen cleaning.
It can be installed in few minutes
and it is provided with
user-friendly commands.
applications
Fit for single or double speed motors
provided with parking switch.
Easy to use
All functions performed through
ON-OFF-ON push button.
Functions
• 4 intermittent levels
• one or two speeds
• syncronized brushes at
any mode
• automatic washing program
• leds signalling working functions
Easy to install
Plug-in connector or fast-on
connections
In-circuit fuse
Supplied with mounting screws
From 10 to 30 V dc
Up to 150 W at 12 V
Up to 250 W at 2
24 V
Less than 70 mA at 10 V
STAND BY CURRENT Up to 200 W
Less
Less than
6 Wthan 40 mA at 30V
POWER SUPPLY
MOTOR POWER
CT621
Power supply
12 V
Motor power
Up to 200 W
Power consumption
Less than 6 W
Protection
Polarity inversion PROTECTION
Inputs
1 command button
2 parking switch
Outputs
2 Slow-speed brush
2 High-speed brush
1 Signalling led
1 Washing pump
Size
125 x 104 x 30 mm
CT622
From 10 to 30 V dc
POWER SUPPLYPolarity inversion
1 command button
From
2
to
5 parking switches Up to 250
MOTOR2 POWER
parking switch Up to 150 W at 12 V
(open in park
Lessposition)
than 70 mA at 10 V
Slow-speed
STAND2BY
CURRENT brush
Less
2 High-speed brush than 40 mA at 30V
Polarity inversion
INPUTS
• From 2 to 5 motors - slow/high speed
Polarity inversion
I max
= 12 A
1 Washing
pump
From 2 to 5 parking switches
x 30 mmpump
INPUTS125 x 104
• washing
(open in park position)
I max = 1 A
1 Signalling led
PROTECTION
OUTPUTS
• From 2 to 5 motors - slow/high
I max = 12 A
• active functions
and timing regulation
• washing pump
• parking switches
damaged
I max = 1 A
INDICATIONS OUTPUTS
M1
M3
M2
M5
M4
CONTROL PANEL SIZE
INDICATIONS
RELAY BOX SIZE
WIPER CONTROLLER
STAND BY CURRENT
parking switches damaged
191 x 109 X•40
mm
CONTROL PANEL SIZE
98 x 100 mm
RELAY BOX SIZE
191 x 109 X 40 mm
Polarity inversion
80
From 2 to 5 parking switches
(open in park position)
PROTECTION
INPUTS
80
• From 2 to 5 motors - slow/high speed
I max = 12 A
• washing pump
I max = 1 A
79
85
100
98 x 100 mm
• active functions and timing regu
From 10 to 30 V dc
Up to 150 W at 12 V
Up to 250 W at 24 V
Less than 70 mA at 10 V
Less than 40 mA at 30V
POWER SUPPLY
MOTOR POWER
WIPER CONTROLLER
M5
M4
85
OUTPUTS
INDICATIONS
WASH
ON OFF
CT series
CT series
98
CUTTING
• activeEDGE
functions and timing regulation
• parking switches damaged
CUTTING EDGE
WASH
CONTROL PANEL SIZE
98 x 100 mm
RELAY BOX SIZE
191 x 109 X 40 mm
98
83
80
27
85
100
ON OFF
83
DEPTH: 75mmDEPTH: 75mm
WIPER CONTROLLER
79
ON OFF
79
M1
CUTTING EDGE
WASH
CT series
M1
28
M2
M3
M4
M5
Wiper Controller Unit CT10 Series
Coordinate
The wiper movements
synchronizing brushes,
having the same harmonious
effect you get in cars.
salve
Your windscreen problems in
a very easy way.
Visualize
Selected intermittent level,
motors state, low washing liquid
level, parking switches damaged.
Drive
Wipers all together
(general ON/OFF) or one by one
(single ON/OFF for each wiper)
Automatic washing program
Versions
From 1 up to 5 wipers
in a single electronic unit,
Power supply
12 V cc, 24 V cc
Driver
12 V motor, 16 A
24 V motor, 8 A
Power consumption
Less than 4 W
Protection
Polarity inversion
Inputs
Low windscreen liquid level
Automatic parking switches
Outputs
Wiper motor (from 1 up to 5)
Washing pump
Indications
Active functions and timing regulation
Low windscreen liquid level
Parking switches damaged
Size
98 x 100 mm
12 or 24 Vcc power supply.
Fit for
Any kind of motors.
Motors are driven by a relay-box
connected to the electronic unit
by a simple multipole cable.
Strong
A polyester frontal mounted on a
3 mm aluminium protects the unit
against water sprinkle or dust.
WIPER CONTROLLER
79
85
100
80
CUTTING EDGE
ON OFF
WASH
CTseries
98
83
DEPTH: 75mm
29
M1
30
M2
M3
M4
M5
Wiper Controller Unit CT20 Series
Coordinate
The wiper movements
synchronizing brushes,
having the same harmonious
effect you get in cars.
very easy way.
• 3 intermittent levels
two speeds
• synchronized brushes at any
mode – patented
• automatic washing program
• indicator leds for active function
Visualize
Selected intermittent level,
motors state,
low washing liquid level,
parking switches damage.
Drive
Wipers all together
(general ON/OFF) or one by one
(single ON/OFF for each wiper)
Automatic washing program.
salve
Your windscreen problems in a
Power supply
12 V cc, 24 V cc
Driver
12 V motor, 16 A
24 V motor, 8 A
Power consumption
Less than 4 W
Protection
Polarity inversion
Inputs
Automatic parking switches
Outputs
Wiper motor (from 1 up to 5)
Washing pump
Indications
Active functions and timing regulation
Low windscreen liquid level
Parking switches damaged
Size
98 x 100 mm
Versions
From 1 up to 5 wipers in a single
electronic unit, 12 or 24 Vcc
power supply.
Fit for
Any kind of motors.
Motors are driven by a relay-box
connected to the electronic unit
by a simple multipole cable.
Strong
A polyester frontal mounted on a
3 mm aluminium protects the unit
against water sprinkle or dust.
WIPER CONTROLLER
79
85
100
80
CUTTING EDGE
ON OFF
WASH
CTseries
98
83
DEPTH: 75mm
31
Intelligent
W i p e r
Switch
Single Wiper Switch CT41 Series
Applications
CT41 replace up to two standard
switches.
Suited for low cost single or double
speed motors provided with
parking switch.
Easy to use
Buttons to increase / decrease
speed and intermittent time
ON/OFF button
Each function is displayed
by a led bar.
Description
CT41 is a very low-cost control
switch for one wiper. It includes
all functions needed for
windscreen cleaning.
It is user friendly and it can be
installed in few minutes.
Functions
• Single wiper selection
• 3 intermittent levels
• one or two speed
• motor brake
• automatic washing program
• indicator leds for active function
Easy to install
No need of mounting screws
Plug-in connector.
CT41
Power supply
10 – 30 V DC
Motor power
Up to 50 W at
Power consumption
Less than 2 W
Protection
Polarity inversion
Inputs
Parking switch
Outputs
Slow speed
High speed 1
Washing pump
Size
49 x 24,5 x 91 mm without female connector
68
49
36,5
11
Up to 70 W at
10
24,5
21
85
33
36,5
49
21
24,5
34
Single Wiper Switch Hight Current CT41P Series
Applications
CT41P replace up to two
standard switches.
Suited for single or double speed
motors provided with parking
switch.
Easy to use
Buttons to increase / decrease
speed and intermittent time
ON/OFF button
Each function is displayed
by a led bar.
Description
CT41P is a high-power low-cost
control switch for one wiper. It
includes all functions needed for
windscreen cleaning. It is user
friendly and it can be installed in
few minutes.
Functions
• Single wiper selection
• 3 intermittent levels
• one or two speed
• motor brake
• automatic washing program
• indicator leds for active function
• dimmer input
Easy to install
Plug-in connector
Fast-on contacts for motor
connections.
CT41P
Power supply
10 – 30 V DC
Motor power
Up to 250 W at 12 V
Power consumption
Less than 2 W
Protection
Polarity inversion
Inputs
Parking switch
Outputs
Slow speed
High speed
Washing pump
Size
49 x 24,5 x 91 mm without female connector
Relay box size
150 x 90 x 40 mm
Up to 350 W at 24 V
Dimmer
35
68
49
36,5
11
36
10
24,5
21
85
Two Wiper Control Switch CT42 Series
Applications
CT42 replace up to three
standard switches.
Suited for low cost single or double
speed motors provided with
parking switch.
Easy to use
Buttons to increase / decrease
speed and intermittent time
ON/OFF button for single or
both wipers
Each function is displayed
by a led bar
Description
CT42 is a very low-cost control
switch for two wipers. It includes all
functions needed for windscreen
cleaning.
It is user friendly and it can be
installed in few minutes.
Functions
• single wiper selection
• synchronized brushes at any
mode-patented
• 3 intermittent levels
one or two speed
• motor brake
• automatic washing program
• indicator leds for active function
Easy to install
No need of mounting screws
Plug-in connector.
CT42
Power supply
10 – 30 V DC
Motor power
Up to 50 W at 12 V
Power consumption
Less than 2 W
Protection
Polarity inversion
Inputs
2 parking switch
Outputs
Slow speed right motor
Slow speed left motor
1 Washing pump
Size
49 x 24,5 x 91 mm without female connector
Up to 70 W at 24 V
High speed right motor
High speed left motor
37
38
Two Wiper Control Switch Hight Current CT42P Series
Applications
CT42P replace up to three
standard switches.
Suited for single or double
speed motors provided with
parking switch.
Easy to use
Buttons to increase / decrease
speed and intermittent time
ON/OFF button for single
or both wipers
Each function is displayed by
a led bar
Description
CT42P is high-power low-cost
control switch for two wipers. It
includes all functions needed for
windscreen cleaning. It is user
friendly and it can be installed in
few minutes.
Functions
• Single wiper selection
• synchronized brushes at
any mode - patented
• 3 intermittent levels
• one or two speed
• motor brake
• automatic washing program
• indicator leds for active function
• dimmer input
Easy to install
Plug-in connector
Fast-on contacts for motor
connections.
CT42P
Power supply
10 – 30 V DC
Motor power
Up to 250 W at 12 V
Power consumption
Less than 2 W
Protection
Polarity inversion
Inputs
2 parking switch
Dimmer
Outputs
Slow speed right motor
Slow speed left motor
Washing pump
High speed right motor
High speed left motor
Size
49 x 24,5 x 91 mm without female connector
Relay box size
150 x 90 x 40 mm
36,5
49
21
Up to 350 W at 24 V
24,5
39
40
Three Wiper Control Switch Hight Current CT43P Series
Applications
CT43P replace up to four
standard switches.
Suited for single or double
speed motors provided with
parking switch.
Easy to use
Buttons to increase / decrease
speed and intermittent time
General ON/OFF button
Single wiper ON/OFF button
Each function is displayed
by a led bar
Description
CT43P is high-power low-cost
control switch for three wipers. It
includes all functions needed for
windscreen cleaning.
It is user friendly and it can be
installed in few minutes.
Functions
• single wiper ON/OFF pushbotton
• synchronized brushes at
any mode - patented
• 3 intermittent levels
• one or two speed
• motor brake
• automatic washing program
• indicator leds for active function
• dimmer input
Easy to install
Plug-in connector
Fast-on contacts for motor
connections.
CT43P
Power supply
10 – 30 V DC
Motor power
Up to 250 W at 12 V
Power consumption
Less than 2 W
Protection
Polarity inversion
Inputs
3 parking switches
Dimmer input
Outputs
Slow speed and high speed
each motor
Washing pump
Switch size
49 x 24,5 x 91 mm without female connector
Relay box size
191 x 110 x 40 mm
36,5
49
21
Up to 350 W at 24 V
24,5
41
36,5
21
24,5
Modular wipers
49
Control
System
Modular Wiper Control System CTMOD Series
Applications
CTMOD replace the standard
switches.
Suited for single or double speed
motors provided with parking
switch.
Easy to use
Buttons to increase / decrease
speed and intermittent time
General ON/OFF button
Single wiper ON/OFF button
Group ON/OFF pushbutton
on request
Each function is displayed by
a led bar
Description
CTMOD is a high-power low-cost
control system for any number
of wipers. It includes all functions
needed for windscreen cleaning.
It is user friendly and it can be
installed in few minutes.
Functions
• single wiper ON/OFF pushbutton
• group ON/OFF pushbutton
on request
• synchronized brushes at any
mode-patented
• 3 (or more) intermittent levels
one or two speed
• motor brake
• automatic washing program
• indicator leds for active function
• dimmer input
Easy to install
Plug-in connector for network
connection
Fast-on contacts for motor
connections
Can bus based
Power supply
10 – 30 V DC
Motor power
Up to 250 W at 12 V
Power consumption
Less than 2 W
Protection
Polarity inversion
Inputs
3 parking switches
Dimmer input
Outputs
Slow speed and high speed
each motor
Washing pump
Switch size
49 x 24,5 x 91 mm without female connector
Relay box size
191 x 110 x 40 mm
Up to 350 W at 24 V
43
Accessories
1
2
3
4
Accessories
1_Panel starting switches
Starting switch with starting lock
Starting switch without starting lock
Starting switch with starting lock
and pre-heating
2_Front panel accessories
Covered switches
Stop push-buttons
Fuses and fuse blocks
SR12 relay board
Relay mini-board to drive
external siren
5_Cabling and extension
wire connectors
ILME 16 / 24 poles
AMP17 / AMP23 16 poles
DEUTSCH 21 poles
3_Acoustic signaling
Front panel 24 V buzzer
24 V siren
6_Thermal transducers
K type thermocouple
18MA, 12MA and ¼ GAS
connections
4_Adapter and relay miniboard
Magnetic pick-up adapter
7_Engine – revolution
reader Transducers
Magnetic pick-up d. 16x1.5
Amplified proximity switch
0 – 105 °C
8_Industrial transducer
INT42VD012 kit – 0-10 bar
INT42VD025 kit – 0-2.5 bar
9_Extension wires on
request
One to one connection
“Y” connection for Master-Slave
configuration
10_Engine Box
Supplied with any kind
of connector
Supplied with anti-vibrant
5
6
7
8
9
10
45