New Products 2013 New Products 2013

Transcription

Ne w
Ne w
Prod uct s
Prod uct s
2 0 1 3
2 0 1 3
The World’s Most Advanced
Modeling Amplifier Has Evolved
Peavey’s Most Advanced Electric Guitar Modeling Amplifier is
Now the World’s First Variable Instrument Performance Amp.
™
One Amp for Electric, Acoustic, and Bass Guitar.
Once again Peavey Electronics revolutionizes the modeling amp
industry. Introducing the world’s first Variable Instrument Performance
amplifier, the VYPYR® V.I.P. — the world’s first amp that contains Bass
guitar, Acoustic guitar and Electric guitar amplifier models. Now for
the first time ever using our Variable Instrument Input, a single amp
can provide amplification for a variety of instrument types.
All VYPYR effects, amp models and parameter controls can be
accessed via the amp itself, with no need to hook the amplifier to a
computer. Peavey’s WYSIWYG control surface quickly allows the user
the ability to see and adjust the control position — no guessing where
the control is supposed to be or having to manually move it to where
it should be from preset to preset.
Not only does the amplifier morph from a bass amp to an acoustic
amp, to an electric amp, it also, for the first time ever in an amplifier
in this category, allows the electric guitar player access to instrument
models as well.
VYPYR’s new USB bi-directional data and audio port provides an
easy way to record, and/or connect to our VYPYR software and store
presets, get lessons, and practice to backing tracks while connected
to your computer.
Using appropriate technology, Peavey uses a combination of a
powerful 32-bit, floating point SHARC processor and patented
TransTube® analog circuitry to create the best sounding modeling
amplifiers available. Nothing sounds as good as a VYPYR.
All of the revolutionary features from the original VYPYR series, now
even better. More power, more effects, more amp models, Variable
Instrument Input, instrument models, and more make this the
ultimate amplifier.
•
Up To 71 Editable Models 36 Amp Models
25 Effect Models 10 On Board Instrument Models
VIP 1
VIP 2
VIP 3
•
• Variable Instrument Input (Electric,
Acoustic, & Bass)
Acoustic, & Bass)
• 20 Watts RMS
• 40 Watts RMS
• Acoustic Guitar Simulation
• 12" Custom Voiced Heavy Duty Speaker
• Bass Guitar Simulation
• 10 Instrument Models
• 2 Bass Amp Models
• 2 Acoustic Amp Models
• On Board Looper*
• WYSIWYG LED Indicator Controls
• Bi-Directional USB (Data-MIDI-Audio
Record Out) - iOS Device Compatible**
• Up to 5 Effects Simultaneously*
Acoustic, & Bass)
• 100 Watts RMS
• 12" Custom Voiced Heavy Duty Speaker
• Power Sponge® 100 Watts to 1 Watt
• LCD Display for Quick Preset, Model,
and Effect Selection
• 10 Instrument Models
• Amp Accessible Real-Time Parameter
Controls
• Up to 5 Effects Simultaneously*
*Activated with optional Sanpera® I or II foot controller ** Requires optional camera connection kit
Electric
Guitar
or
Acoustic
Guitar
or
VYPYR® Edit
Bass
Guitar
Sanpera™ II Footcontroller
• Two expression pedals offers real time
control over Volume, Wah, Pitch Shifter,
Rotary Speaker and Slicer
• Roadworthy cast-metal housing
• 10 momentary selector buttons with LEDs
• Self-power via MIDI
• Swappable expression pedals
• Large LCD display
• Dedicated tap tempo capabilities
• Preset select or instant on/off effects
operation
• Looper control
• Bank increment/decrement function
• High-quality metal switches
• Access almost any Vypyr® amp function
• On-screen tuner
Downloadable
Software
Sanpera™ I Footcontroller
• Expression pedal offers real time control over
Volume, Wah, Pitch Shifter, Rotary Speaker
and Slicer
• Bank select function
• 4 momentary selector buttons with LEDs
• High-quality metal switches
• Looper activation and control
• Roadworthy cast-metal housing
Peavey Introduces Next Generation ValveKing® Series
New line delivers boutique tones and brand new features for today's working guitarist.
In addition to all the boutique qualities and hot-rodded tones that guitarists have come to expect from the
ValveKing® series, the next generation line incorporates brand new cutting-edge features for recording and
performing musicians. For the recording musician, the ValveKing features a USB direct recording output, which
pipes the mic'ed amp vibe directly into a computer. On the rear panel, the built-in Peavey MSDI™ (Microphone
Simulated Direct Interface™) XLR direct interface eliminates the need for miking by allowing users to send the
amp's signal directly to a recording device or mixing console.
With versatile tone for rock, jazz, or metal, the new generation ValveKings have the capabilities to create almost
any sound imaginable. ValveKing’s proprietary Vari-Class™ knob enables guitarists to adjust the ValveKing's
“class” characteristics, allowing for complete power amp type versatility. True to its name, ValveKing even
includes the new TSI™ tube-monitoring indicator that keeps you apprised of the health of your tubes!
ValveKing offers other high-end features like variable power control, so you can tailor your output to your
performance situation without compromising tone. With triple 12AX7s, two independent foot-switchable
channels each with their own EQ, and the Vari-Class™ variable Class A/AB simulation control, the next generation
ValveKing delivers massive amounts of completely customizable all-tube power.
ValveKing® Micro Head
• Two EL84 and three 12AX7 tubes
• 2x Footswitch inputs. One controls Channel
& Boost. One controls Reverb & Effects
loop.
• Gain boost on lead channel
• Reverb with level control
• Buffered effects loop
• Vari-Class™ variable Class A simulation
control
• Patented Microphone Simulated Direct
Interface (MSDI™) with ground lift and
speaker defeat
• Speaker output with impedance switch
• TSI™ tube monitoring with LED pass/fail
indicator lights
• Footswitch input
• Microphone Simulated USB Recording
output
• 3 band EQ
• 20w, 5w and 1w power switch
ValveKing® Head
• Four 6L6GC and three 12AX7 tubes
• Two independent footswitchable channels
• Separate EQ for each channel
• Footswitchable gain/volume boost on lead
channel
• Resonance & Presence controls
control
Interface (MSDI™) output with ground lift
and speaker defeat switch
• Two powered outputs with impedance
switch for using an external cabinet
• 100w, 25w & 5w power switch
indicator lights
• Two footswitch inputs. One controls
Channel & Boost. One controls Reverb &
Effects loop
• USB direct recording output
• Bright switch on Clean channel
ValveKing® Combo 20
• Two EL84 and three 12AX7 tubes
channel
• Damping control - controls Presence and
Resonance at the same time
control
and speaker mute switch
indicator lights
Effects loop
ValveKing® Combo 50
• Two 6L6GC and three 12AX7 tubes
channel
• Damping control controls Presence and
Resonance at the same time
control
and speaker mute switch
indicator lights
Effects loop
ValveKing® Head
ValveKing®
Combo 50
ValveKing®
Combo 20
ValveKing® Micro Head
Michael Anthony Signature
VB-MA™ Bass Amplifier
As a member of legendary bands, Michael Anthony has toured the
globe, performing before millions of people. Currently with the supergroup Chickenfoot, Anthony has relied on the Peavey VB-3 exclusively and is now proud to share a uniquely voiced model that suits
his exacting demands perfectly.
Similar to Peavey’s popular VB-3™ bass amplifier, the dual-channeled
VB-MA is styled with a striking red backlit panel that features Michael
Anthony’s chili pepper logo. The VB-MA combines four 12AX7 and
two 12AT7 preamp tubes with a matched octet of EL34 tubes that
give players tons of characteristic pentode tube tone with uncharacteristically tight response for an all-tube amplifier. An innovative,
and tour necessary world-compatible switch-mode power supply and
advanced design provide stadium levels of blastine tonality.
When it comes to live performance, Anthony insists on rock solid
tonal control. That’s why the VB-MA is loaded with a true independent second overdrive channel with separate EQ and Master Volume
controls. But Anthony and Peavey didn’t stop there. The addition of
a unique Blend control enables players to blend between overdrive
and clean channels for even more tonal flexibility.
Backing up the amplifier’s organic tube tone is a vintage three-band
active/mid-cut EQ that combines traditional high and low tone controls with a mid control featuring a four-position midrange selector
switch that allows players to set the mid-frequency at 200, 450,
600 or 800 Hz. Combined with the nine-band, constant-Q graphic
equalizer—spaced at optimized frequencies, with each slider providing 15 dB of cut and boost—the VB-MA allows for virtually any EQ
curve imaginable.
Peavey’s patented Resonance and Presence controls, which adjust
the damping factor at the low and high ends, respectively and are
also useful in dialing in power and response for particular styles,
including “tight” sounds that are not normally associated with tube
amplifiers. The VB-MA features a three-way speaker impedance selector, to enable players to match the VB-MA to virtually any bass
speaker enclosure.
Voiced and styled to match the VB-MA tube bass amplifier, the new
VM-810 bass enclosure features the exclusive Michael Anthony
logo, and eight custom-designed 10" ceramic-magnet loudspeakers
paired into four tone chambers. It can be operated in stereo or mono
modes with 800 watts power handling.
New amp features massive tube• Eight EL-34, Fourpowered
12AX7 and two 12AT7
tubes
bass
tone in a surprisingly
• Universal power supply for worldwide compatibility
lightweight
• Overdrive with blend control for blending
in the overdrive withpackage.
the
clean channel with EQ control
• Striking red backlit panel with Michael Anthony’s chili pepper logo
• Volume/Overdrive
• Low/Mid/Shift/High
• Bright switch
• Low cut switch
• Tube compressor with Level control
• Master 9-band graphic EQ with defeat switch and LED
• Master volume
• Master Resonance and Presence controls
• Single input
• 15 dB Pad switch
• Mute switch with flashing blue LED
• Power and Standby switches
• Back-lit faceplate for Pilot
• Buffered tuner send
• Master effects loop
• 300 Watts
DW Acoustic Series
DW-1 Acoustic Specifications
Dreadnought body with spruce laminate top
Mahogany back and sides
03018230 DW-1
Mahogany neck with rosewood fingerboard; 21 frets
Passive piezo pickup
Adjustable truss rod
Rosewood bridge
Scale length 25.5” with a nut width of 1.625”
Dreadnought body with spruce laminate top
Mahogany back and sides
03018240 DW-2
Active electronics with built-in tuner
Rosewood bridge
Dreadnought body with lower cutaway; solid spruce top
Rosewood back and sides
03018250 DW-3
Active electronics with built-in tuner
Laser etched custom rosette
Rosewood bridge
™
The Peavey Composer™ acoustic guitar is a parlor-size
musical instrument made for guitarists who want the
tone and craftsmanship of a full-size instrument with
the comfort and playability of a parlor guitar.
Composer™ AU Mandolin Specifications
Shape inspired by Peavey Composer Parlor guitar
Solid spruce top with maple back and sides; white binding
Maple neck with rosewood fingerboard
Rosewood floating bridge
03018320 Composer ™ AU Mandolin
13.78” scale length
1.18” nut width
Composer™ AC 3/4 Scale Classical
Acoustic Specifications
Spruce top with maple back and sides; white binding
Mahogany neck with rosewood fingerboard
Rosewood bridge
03018340 Composer ™ 3/4 Scale Classical
23 1/4” scale length
1 13/16” nut width
Composer™ Ukele Specifications
24” natural spruce top
Sapele back & sides
Sapele neck with rosewood fingerboard
Rosewood bridge
03016310 Composer ™ Ukulele
Black chrome die-cast machine heads
Composer™ Parlor Specifications
Custom parlor style body design
Natural or sunburst finishes
23 3/4” scale length
Eastern mahogany neck
Rosewood fingerboard and bridge
03014420 Composer ™ Parlor Sunburst (shown)
Spruce top
03014170 Composer ™ Parlor Natural
Custom binding
Includes backpack style gig bag
Composer™ GU Guitalele Specifications
Saple top, back and sides
Maple neck with rosewood fingerboard
Chrome die-cast machine heads
03019870 Composer ™ GU Guitalele
Rosewood bridge
Classic Style
®
Raptor Plus Amazing Tones
A timeless standard with three expressive
pickups! The Raptor is designed for total playing
comfort, with a 25.5” scale and ergonomic
tuner placement on a six-in-line headstock
with straight string pull.
Raptor® Plus Specifications
25.5” scale
Solid body construction with new styling for better ergonomics and balance
Wide top pole piece single coil pickups for bigger string window with more focus
Tremolo bridge
Peavey six-in-a-line headstock with ergonomic tuner placement and string pull
Master volume and tone controls
5-way pickup selector, hum canceling in second and fourth position
Dual action torsion rod
New colors now available: Cherryburst, Ivory and Northeast Red
Case not included
03018130 Raptor ® Plus Cherryburst
03018120 Raptor ® Plus Ivory
03018140 Raptor ® Plus Northeast Red
Predator Plus
®
03018010 Predator ® Plus Snowy White
Raptor® Plus Specifications
Vintage burst finish includes
AAA quilt maple cap stained
using Peavey’s exclusive four
step deep stain color process.
25.5” scale
Sealed diecast tuners, 15:1 gear ratio
Master volume and tone controls with push/pull tone for single coil operation
Two Peavey custom designed humbucking pickups
Three-way switching selector
Solid basswood body
String-thru-body for maximum sustain
Binding on body
Black and candy apple red also available with licensed Floyd Rose® tremolo
Case not included
Raptor Custom
®
Peavey Powerplate
The patent pending Peavey Powerplate
is a new innovation for stringed
instruments. The Powerplate is a metal
plate that is embedded into the back of
the headstock which increases sustain
and volume. The Powerplate is mounted
using the machine heads and increases
the amount of string vibration energy
that is projected by the instrument.
Raptor® Custom Specifications
25.5” scale
Solid body construction with new styling for better ergonomics and balance
Wide top pole piece single coil pickups for bigger string window with more focus
Tremolo bridge
Peavey six-in-a-line headstock with ergonomic tuner placement and string pull
Master volume and tone controls
5-way pickup selector, hum canceling in second and fourth position
Available in Black with maple neck, Northeast red, Silverburst and Gulfcoast Blue
Case not included
03018150 Raptor ® Custom Black
03018160 Raptor ® Custom Northeastern Red
03018180 Raptor ® Custom Sliverburst
03018170 Raptor ® Custom Gulfcoast Blue
Riptide Series
03018220 Riptide ™ Black
03018200 Riptide ™ Gulfcoast Blue
03018210 Riptide ™ Classic White
™
03018190 Riptide ™ Lauderdale Red
Riptide™ Plus Specifications
Canadian hard rock maple neck
25.5” scale; 22 frets
Bolt-on neck with comfortable 5-bolt attachment
Rosewood fingerboard
Two custom-wound single coil pickups
Chrome hardware
Compensated tele-style bridge
Sealed Grover ® tuners with 16:1 ratio
Available in black, Gulfcoast blue, Classic white and Lauderdale Red
Milestone Series
™
Rock-Solid Performance
Peavey Powerplate
The patent pending Peavey
Powerplate is a new innovation
for stringed instruments. The
Powerplate is a metal plate that
is embedded into the back of the
headstock which increases sustain
and volume. The Powerplate is
mounted using the machine heads
and increases the amount of string
vibration energy that is projected by
the instrument.
Milestone® Specifications
34” scale; 20 frets
Exclusive PowerPlate™ increases sustain
Maple neck with rosewood fretboard
19:1 ratio tuning machines; chrome hardware
Dual-expanding truss rod
12” radius
Balanced, comfortable body styling with sculpted front and back, improved access neck joint
One split single coil, one straight single coil pickup (hum canceling when used together)
Stamped steel bridge
Two volume, master tone controls
Available in Vintage Burst, Ivory, Gulfcoast Blue and Black
03018100 Milestone ® Vintage Burst
03018480 Milestone ® Black
03018110 Milestone ® Gulfcoast Blue
03018090 Milestone ® Ivory
The Milestone® bass is a rare combination of stunning craftsmanship and intelligent
design with an attractive price range. The body design is both classic and elegant,
providing an intuitive feel. Try one today and get ready to be amazed!
ESCORT
®
Portable Pro
Audio Systems
Escort® Portable PA Systems
• Two-way speaker system with 10” woofer
• RCA/3.5 TRS media inputs
• USB MP3 playback
• Patented FLS® (Feedback locating system)
• Digital multi-effects
• Midmorph®
• LCD screen for ease of file playback and effect
selection
• Seven-band graphic equalizer
• Two folding speaker stands
• Two 15’ speaker cables
• Storage compartment for optional accessories
• Convenient package with luggage-style wheels
Escort® 3000, 5000, & 6000
Expanding on one of the most successful and most often imitated
portable PA system in the world, Peavey Electronics is proud to
introduce new versions of its innovative Escort® portable PA systems.
The Escort series integrates the entire PA system into one complete,
easy to use, easy to transport, highly reliable, incredible sounding
package, making it the perfect choice for schools, churches, DJs, and
small music groups.
The new Escort takes the reliability, transportability, and audio quality
of the original and combines it with state-of-the-art features such
as digital multi-effects, USB MP3 player, Bluetooth® wireless audio
(Escort 6000), Peavey's Midmorph® technology, and our patented FLS®
(Feedback Locating System).
The carrying case provides storage for everything needed for sound,
including plenty of room for optional accessories such as microphones
and cables. In addition to the included folding speaker stand, the case
even includes luggage style wheels to roll the entire system away. No
heavy lifting, just heavy audio!
Escort® 3000
• 300 Watts (150 x 2)
• 7 Channels
• Custom rubberized knobs
• 6 combination XLR 1/4" inputs
Escort® 5000
• 500 Watts (250 x 2)
• 8 Channels
• 7 Combination XLR 1/4" inputs
• Monitor send
• Subwoofer output
Escort® 6000
• 600 Watts (300 x 2)
• 9 Channels
• 7 Combination XLR 1/4" inputs
• Monitor send
• Subwoofer output
• Bluetooth® wireless audio playback
PORTABLE AND POWERFUL
PORTABLE
POWERED AUDIO
SYSTEM
PV i
PORTABLE
The tradition of roadworthy, reliable professional portable audio
systems continues with the PV®i Portable pro audio system.
The PVi features 300 watts of power for crystal -clear audio
reproduction from a variety of sources. This eight channel
system includes four XLR or 1/4" microphone inputs and
two stereo inputs featuring 1/8", RCA or 1/4" inputs.
Each channel includes three bands of EQ along with a
variety of digital effects with LED display. In addition
the PVi portable is capable of playing back MP3
audio tracks via USB. Recording audio out can easily
be done digitally via USB or via the onboard analog
record RCA outputs. A seven-band EQ completes
the master section allowing the audio to be tuned
for a variety of different environments. Speakers
and cables are included in this self-contained,
portable PA system featuring rugged metal
latches and a five-year extended warranty.
• 300 watts
• 8 channel powered mixer
• Full 3-band EQ per channel
• 2x stereo channels
• Media inputs
• Record outputs
• Analog and digital record outputs
• Built in digital effects and delay
• Seven-band master Graphic EQ
• USB input for MP3 playback
• EFX send and return
• Includes speakers and speaker cable
• Assignable stereo power section
®
PVXp™10
Two-way bi-amped sound reinforcement enclosure
• 10" heavy-duty woofer
• RX™10N compression driver, with 1" diaphragm
• 400 watts peak available power
• Ultra-reliable fan-cooled power amps
• Patented Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage
• Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
• Input is via a combo female XLR and 1/4" TRS phone jack with balanced input
• Thru output is via an XLR and 1/4" TRS phone jack
• Durable plastic injection-molded trapezoidal enclosure
• Extra angled section on right side allows floor monitor use
• Full-coverage heavy-duty perforated steel grilles, with powder coat finish
• Pole mount molded-in for 1 3/8" diameter poles
• Top and bottom flying point inserts
PVXp™ SUB
Vented bass powered subwoofer enclosure
• 15" heavy-duty woofer
• Threaded pole for top speaker mount
• 850 watts peak available power
• Power amp has forced air cooling for maximum reliability
• Internal line level low-pass/high-pass crossover network
• Fully adjustable Kosmos® C for increased bass impact
• XLR/one quarter inch combo jack input
• Two high-pass XLR outputs, one full range thru XLR output
• Large heavy-duty locking casters
• Perforated steel grill
• Steel handles
• T-nut woofer mounting
• Rugged dado and rabbet construction plus internal braces for
lightweight yet strong cabinet
• Compact dimensions for a 15" woofer based sub
Elements
™
Weatherproof enclosures
Elements™ C Series
Elements™ M Series
all peavey® performance & reliability.
All WEATHER DESIGN TO RESIST THE ELEMENTS.
The all-new American-made, incredibly durable, reliable and versatile Elements weatherproof enclosures are a combination of innovative cabinet construction and proven, weatherized components designed for direct contact with the elements in the most demanding climates. Gone
are the days of hanging so-called enclosures outside only to replace the speaker in a year or two.
The Elements C series of composite enclosures are constructed from an advanced composite material that is dimensionally stable in wet
conditions and resists contamination, yet has the resonant properties of wood. This light and durable material ensures unmatched sonic performance while providing reliable service year after year. The aluminum grills of the Elements C series enclosures feature a barrier membrane
that repels water yet allows moisture to escape without affecting the sonic performance of the loudspeaker.
The IP45 rated Elements C series is available in three two-way, full range configurations and as a flyable subwoofer. The Elements 115C and
Elements 112C debut new 15" and 12" weatherproof Black Widow® woofers and an RX™22 2" titanium diaphragm compression driver tweeter
coupled to a Quadratic-Throat Waveguide® rotatable horn. The Elements 115C and Elements 112C can each be ordered with either a 60 X 40
or a 105 X 60 horn. The Elements 108C combines a 75 X 75 horn with an 8" weatherproof woofer in a compact and durable enclosure. The
Elements 212 subwoofer is a flyable subwoofer enclosure featuring a pair of 12" weatherproof woofers.
The Elements M series enclosures feature rugged molded cabinets and a variety of speaker sizes and horn options. All cabinets feature an
IP45 environmental rating, thanks to stainless multi-fly-point hardware, sealed terminal connections, weather-repellant grills and weatherproof
speaker cones. The cabinet and hardware designs combine to form a system that can be used in almost any application. The Elements M
series array hardware and cabinet design allows cabinets to be mounted in either vertical or horizontal arrays in 5-degree increments. In addition, lighting/power pole mounting hardware is available to accommodate both the M and C series cabinets.
Each Elements M series two-way system features an RX™22 2" titanium diaphragm compression driver tweeter and is available with 8", 10"
and 12" woofer combinations. The Elements 110M, and 112M come with Quadratic-Throat Waveguide® rotatable horns and can be ordered in
60 X 40 or 105 X 60 configurations. The Elements 108M combines a 75 X 75 horn with an 8” weatherproof woofer in a compact and durable
enclosure. The Elements M series also contains a flyable 212 subwoofer that can be flown alongside in horizontal or vertical arrays.
ELEMENTS™ C series:
Elements M Series:
Mounting Provisions:
(12) 3/8"-16 threaded mounting suspension points (3 top, 3 bottom and 2 each side
& 1 each at top rear and bottom rear)
Three sets of (4) 1/4X20 SS inserts, the sets are located on the top, rear, and bottom
for use with the Peavey® Versamount™ 70+ and the Peavey Elements™ lighting and
power pole mount bracket.
Mounting Provisions:
Three sets of (4) 1/4X20 SS inserts, the sets are located on the top, rear, and bottom
for use with the Peavey® Versamount™ 70+ and the Peavey Elements™ lighting and
power pole mount bracket. Available horizontal and vertical array brackets. Pole
mount stand adaptor.
Enclosure Materials & Finish:
Cabinet is constructed with an advanced composite material, coated in our black
Hammerhead™ poly-urea with a lightly textured finish.
Triple-layer moisture-repellant grille assembly, consisting of a perforated stainless
steel outer grille, with inner hydro-phobic cloth mesh, and a proprietary third layer.
Input Connections:
Two NL-4 twist lock in parallel, and one 4-position screw terminal barrier strip, with
“ + - + - ” parallel wiring (for daisy-chaining). Weather-sealed input cup cover with
gland nut.
• Quadratic Throat Waveguide™ for horn equipped models.
• Rotatable horn with available 60 X 40 or 105 X 60 coverage patterns (Elements
108C 75 x75)
• Water-resistant Black Widow® woofers (except Elements 108C)
• RX22 compression driver tweeter (all models except 212C Sub)
• All external hardware is stainless steel
• Overall system weatherization rating of: IP45
• Quadratic Throat Waveguide™ for horn equipped models.
• Unique trapezoidal enclosure designed to be flown in multiple angles and array
combinations
• Rotatable horn with available 60 X 40 or 105 X 60 coverage patterns (Elements
108M 75 x75)
• Water-Resistant Black Widow® woofers (except Elements 108C)
• RX22 compression driver tweeter (all models except 212M Sub and Elements 108M)
• Stainless steel hardware
• Weather sealed input panel
• Overall system weatherization rating of: IP45
Elements MP and MT Series:
• Two-way surface mount installation enclosures
• High-performance woofers
• 1" metal dome tweeter
• Weather resistant enclosure
• Available in powered and passive configurations
• Powered versions come with BLUETOOTH® wireless connectivity
• Passive versions are transformer equipped with 70 and 100 V taps as well as 8 Ohm thru
• Versamount® 35 compatible rear mounting points
Lightweight
Efficient
Intelligent
The All New IPR
Power AMPS
™
We’ve pushed technological limits
to bring you an amazingly powerful
and efficient power amp for just
pennies per watt!
IPR2 2000
IPR2 3000
IPR2 2000 DSP
IPR2 3000 DSP
• 530W RMS x 2 at 4 ohms
• Two independent crossovers
• Combination XLR 1/4" inputs
• Combination twist-lock output connectors
• 7.0 lbs. / 3.17 kg.
• 7.94 lbs. / 3.47 kg.
• Onboard DSP section with delay, EQ,
assignable independent crossovers, setup
wizard, lockable security settings
• Waves® MaxxBass® processing
• 7.0 lbs. / 3.17 kg.
• 7.94 lbs. / 3.47 kg.
Shaking up the pro audio industry with innovative
increasing output power, reliability and thermal
power amplifier designs has become our stock
efficiency. IPR2 Series amplifiers are designed
in trade. More than 30 years ago, we were the
with a resonant switch-mode power supply and a
first to break the dollar-per-watt barrier. Not long
high-speed class-D topology that yields the highest
after that, we became the first manufacturer to
audio resolution and efficiency available. And all
mass-produce a class-D amplifier for use in live
at a cost that shatters the old-guard paradigm of
audio applications. We debuted our first switch-
power-amp valuation. This isn’t about “dollars per
mode power supply over a decade ago. Then in
watt.” This is pennies per watt.
2009 we launched the IPR™ series and one again
The revolutionary Peavey IPR2 DSP Series power
Peavey revolutionized the power amp industry.
Now introducing the refinement of that amazing
technology
with
improved
performance
and
reliability, the Peavey IPR™2 Series.
amplifiers are the only power amps to integrate
Waves® MaxxBass® technology, which uses psychoacoustics to create precise harmonic overtones
that give the illusion of adding low frequencies to
Boasting a net weight of just over 7 lbs. on the
the mix. This technology allows sound engineers
lightest model, the ground breaking IPR2 Series
to dial more perceived low-end into a system
utilizes an advanced design that allows our
without adding more power amps, processing or
engineers to dramatically reduce weight while
subwoofers.
IPR2 5000
IPR2 7500
IPR2 5000 DSP
IPR2 7500 DSP
• 12.5 lbs. / 5.7 kg.
• 12.5 lbs. / 5.7 kg.
• 12.5 lbs. / 5.7 kg.
• 12.5 lbs. / 5.7 kg.
IPR 50
PV i 6500 /
PV i 8500
®
®
Now
with
Portable powered TOP-BOX mixers with BluEtooth®
streaming audio, SD card & USB mp3 player
• FLS® Feedback Locating System
• Midmorph® EQ
• Kosmos®-C
• On-board 24- bit digital effects with mute button
• Digital effects parameter control
• Combination XLR and 1/4" input jacks
• 9-band graphic EQ with FLS
• Master Mute for channels 1-5 (PVi 6500)
• Master Mute for channels 1-7 (PVi 8500)
• Footswitchable effects defeat
• 15 Volt phantom power (PVi 6500)
• 48 Volt phantom power (PVi 8500)
• RCA, 1/8" Media input
• Selectable Main or Monitor dual power section
• RCA Record outputs
• LED Meter bridge
• Bluetooth® streaming audio
• SD card & USB MP3 player
• Clip light and signal present indicator
• Main line level 1/4" output
• DDT™ speaker protection circuit
Peavey WFS™ 3.70 Wireless speakers
The Peavey WFS 3.70 Wireless speakers are a set of Active speakers
with AirPlay® and DLNA® technology, enabling wirelessly streamed music from not only your IOS device but from any media distributed over
a network, Mac or PC.
Perfect for creating great sounding audio zones all over your entire
home, the WFS 3.70 feature a pair of speakers (one active and one
passive) with 70 total watts. Each rubber coated compact cabinet features a 3" Kevlar reinforced cone driver with dual magnets and a ¾"
silk dome tweeter. The sound is nothing short of amazing.
The speakers are incredibly easy to set up and takes just a few moments. With multiple pairs, you can have audio zones in your home
that can play separately from different sources or you can have distributed audio from one audio source.
And you’re not limited to what audio source goes to what speaker. You
can play your iPhone in the kitchen, audio from your PC in the living
room, your networked media player in the bedroom or change all the
audio sources for each zone.
Power Output: 70W peak power
Frequency Response: 20 Hz ~ 20 kHz
Woofers: 3" Kevlar with dual magnets
Tweeters: 3/4" silk dome
Digital Signal Processor: 32-bit
Total Harmonic Distortion: < 0.15%
Signal-to-Noise Ratio: > 85 dB
Amplifier type: Class D
Crosstalk: < 50 dB
Impedance: 20k Ohms
Dimensions: H: 160 x W: 110 x D: 140 mm
Weight: 3.0 kg
BTS 5.35
™
BLUETOOTH SPEAKER
a wireless stereo speaker for connection
with your mobile phone, PC, notebook or
any Bluetooth-enabled stereo device.
With a one-to-one pairing that protects listening privacy, the BTS 5.35
provides wireless A2DP Bluetooth stereo-music streaming and supports AFHSS / AVRCP / Class II (10 ~ 30 meters). The speaker accepts
both wireless and wired audio sources, and is compatible with any PC
via Bluetooth, as well as all Bluetooth-enabled stereo smart phones
and any brand of stereo-Bluetooth-enabled notebook.
The speaker’s powerful 5" subwoofer features a long-throw bass effect that supports movie-watching with encoded DTS® / Dolby® / THX®
home-theater sound. The power rating is 35 watts RMS, with a max
power of 54 watts RMS.
Output Power: 35 watts RMS, voltage @13V
Max Output Rating: 54 watts RMS, voltage @18V
Frequency Responses: 20 ~ 20 kHz
Lowpass Driver: 5.25" x1 ( in total), mixed paper cone
Highpass Driver: 2.5" x2 full range + 2 treble, PP silver coated
Lowpass Filter: 80 ~ 150 Hz
Highpass Filter: 600 ~ 20 kHz
Wireless Technology: 2.4G Bluetooth technology
Operation: Auto Pairing, Class II 10 meters
Bluetooth Integrated Chip set: CSR BC05
Loudspeaker Type: Active
Amplifier: Class AB / Analog IC NE5532
Dimensions: 9.5" x 9.5" x 9.5"
Weight: 12.1 lb.
analog/digital
hybrid mixers
FX 2 Series
MIXERS
™
The new FX2 features twice the processing power of the original. FX2 Series mixers feature new, Peavey-exclusive technology
to enhance live sound reproduction and project studio recording, including Silencer mic preamps, which allow very high gain
with low noise and distortion for crystal-clear signal reproduction. The four pre-fader auxes per channel provide four monitor
mixes, while the two post-fader auxes are ideal for adding effects (built-in or outboard). These mixers also include dual DSP
engines that allow multiple simultaneous effects assignable to any channel via aux 5/6. Onboard effects include reverb,
reverb enhanced, delay, compression, expander, de-esser, chorus, flanger, tube emulator, vocal enhancer and gate. Chain
up to two processors together on each of the two available effects windows. The digital output processing section includes
Feedback Ferret®, dual 5-band Parametric EQ or dual 28-band Graphic EQs, digital delay lines, and dynamics/limiters. The
output section can be configured for Stereo, Dual Mono or Subwoofer mode with a built-in electronic crossover. Dual USB 2.0
ports allow streaming of digital audio directly to a computer or recording to a memory stick, using the exclusive built-in MP3
compression. You can record your rehearsals, songwriting sessions or live performances directly to an inexpensive USB stick
... no other hardware needed and then transfer them to your computer to burn CDs or to transmit electronically. Or insert a
memory stick to playback audio files for use between sets.
• High-power dual DSP engine with improved digital effects and output
processing including Feedback Ferret®, 28-band GEQ/5-band PEQ,
delay and limiter
• USB 2.0 “A” connection to record directly to or playback from
memory stick
• USB 2.0 “B” connection for streaming digital out
• 3-band EQ with sweepable mid-frequency and variable low cut filters
• 2 stereo channels with dual mic/line inputs
• 48 volt phantom power
• 6 Aux sends
• 4 subgroups
• 100mm faders
• Double the processing power of the original FX Series
• New “high efficiency” switching power supply
• Silencer™ mic preamp XLR inputs
FX™2 32 Channel Mixer
DOUBLE THE PROCESSING POWER of the Original FX® Series - No Processing Limitations!
100 mm Faders - Improved USB Playback And Record - Onboard Output Processing!
SB™ 3216 Stage Box IO
Peavey Electronics and Waves have partnered to produce one of the most innovative and feature-rich digital
audio mixing platforms on the market today. The 3216 Stage Box IO interface from Peavey, powered by the
Waves SoundGrid audio processing/networking platform, is designed to work with the new Waves eMotion
Mixer for SoundGrid. Combined, the products result in a mixing platform that is unsurpassed in the industry
with regard to features, audio quality, and value. The Peavey Stage Box IO features 32 microphone/line
inputs and 16 line outputs. The digitally controlled high-quality mic preamps feature ultra-low input noise,
high slew rate, very low THD, and 66dB adjustment range in 1dB steps to maximize dynamic range. An
integrated gigabit Ethernet switch allows for easy networking. Combine two Stage Box IO interfaces for a total
of 64 inputs by 32 outputs.
• 32 microphone/line inputs
• XRL mic and TRS ¼" line inputs
• 16 Line outputs
• High performance digitally controlled
microphone preamps feature:
• Low input noise at both high and low gain
settings
• High slew-rate
• Very low THD
• Mic input accepts a +27 dBu input signal
without pad
• 66 dB adjustment range in 1 dB steps to
maximize dynamic range
• Gain changes on zero crossing to minimize
adjustment noise.
• 48 Volt phantom power switchable on every
mic input.
• Integral gigabit Ethernet switch for easy
networking
• Waves SoundGrid Digital audio network
protocol
• Balanced output maximum level switchable
between + 24 dBu and + 18 dBu
• Supports sample rates of 44.1 kHz, 48 kHz,
88.2 kHz and 96 kHz
• External word clock input and output
• Two AES digital outputs
• Headphone output with level control
• MIDI in and switchable out or thru
• 4U rack mount package
• Universal input power supply
eMotion LV1 Features
• 64 input channels (mono/stereo)
• 32 stereo busses + return channels
• L/R, center, mono main busses + master channels
• 8 DCA faders, 8 mute groups, 8 user-assignable function controls
• Cue/SIP and talk-back
• EMO-Q4 Equalizer: 4-band EQ with HP and LP per channel
• EMO-D5 Dynamics Processor: Comp/Gate/Expander/DeEsser/
• Limiter/Leveler per channel
• Up to 6 plugins per channel
• Connect to multiple DAWs for recording and playback
• Save and transmit sessions and snapshots from any DAW to eMotion
• Connect and share SoundGrid I/O devices, drivers and applications
• Up to 1000 Scenes/Snapshots
• Up to 96 kHz sample rate
• Automatic plugin delay compensation
www.peavey.com
Features and specifications are subject to change without notice.
©2013 Peavey Electronics Inc.

New Products 2013 New Products 2013

Transcription

Similar documents

Peavey H 15 sub

vTuner Internet Radio Rapid Prototyping SDK USB

Full Metal Jacket

Q-Bass-U 2.1 Audio - LTB Audio Systems

to Open Manual File - American Musical Supply

High Performance Home Theater. With Style.

Tech 21 VT Bass DI

Dorothy I. Summers Theatre Technical Rider

Bticino 334202 (5 Wire)

Ampeg SVT-CL Schematics

We are Innovation. Amplified.