Safety Valves - soffieria sestese

Transcription

Safety Valves - soffieria sestese
Safety Valves
08
The safety valve is basically a plunger that
sits in a seat and is held against that seat
by a spring. The pressure in the line presses
against that plunger and, when the pressure
exceeds the pressure of the spring holding
the plunger against the seat, the plunger is
pushed away from the seat, allowing gas to
pass through.
Technical characteristics
–– Our valves are constructed with body in
borosilicated glass 3.3 and plunger in PTFE.
–– The valves are designed to meet the
requirements of DNV Business Assurance
and are supplied with inspection
certificate 3.1
Technical Specifications
DN
15
25
Discharge
Coefficient Kd
0.559
0.559
Flow Diameter
(mm)
15
25
Flow Cross
Section (mm²)
176
490
Set Pressure
Range (bar g)
0,5 ÷ 1,0
0,5 ÷ 1,0
Code
SSVF015
SSVF025
Other sizes and setting pressure on request
Soffieria Sestese S.r.l.
Via Riccardo Wagner, 291
20831 Seregno (MB) – ITALY
Tel. +39 0362 17.90.991
Fax +39 0362 17.95.763
VAT Ref. IT00846850964
C.F. 07109250154
[email protected]
www.soffieriasestese.it