prepare for summer rides

Transcription

prepare for summer rides
May 2013
PREPARE FOR SUMMER RIDES
ts
h
g
i
l
d
s
a
r
e
o
H
r
r
i
&
* Tail n Ness More!
* Arle Much M
* And
National Cycle
Windshields
pgs. 2-5
Custom Chrome reserves the right to correct printed errors
Screens by National Cycle
15342
15357
33114
•
•
•
•
No-Hole Ballsocket
Rake Adjust
Height Adjust
U-Clamp
Deflector Screen by National Cycle
The 15 1/2" tall Deflector Screen is made from a DOT
approved high-impact acrylic. The mounting system
uses the innovative Rake Adjust which permits 100°
of screen adjustment without moving the mounting
hardware. A double No-Hole Ballsocket attaches the
screen to the mounting hardware, providing simple
assembly and adjustability. Two sets of clamps are
included in each kit to fit 7/8" or 1" handlebars.
15342
Clear screen (MFG #N2590)����������������������� $109.99
15343
Tinted screen (MFG #N2591)��������������������� $119.99
Flyscreen by National Cycle
•
•
•
•
No-Hole Ballsocket
Rake Adjust
Height Adjust
QuickSet
Deflector Screen DX by National Cycle
The “DX” Deflector Screen has all the features of the original
Deflector Screen with the addition of QuickSet clamps for easy, notool removal and reinstallation of the windshield. For most models
with 1" or 1 1/4" handlebars.
33114
Clear screen; 1" (MFG #N2594A)������������������������������������������ $119.99
The Flyscreen windshield has a fully
adjustable mounting system which
features flush fit countersunk bolts
and a polished chrome finish. Made
of high-impact acrylic with a choice of
dark tint (dark enough to hide cables)
or light tint (which enhances chrome).
All materials are DOT approved.
Measures 9" from top of headlight cutout. Fits all Harley models with stock or
aftermarket exposed fork tubes 43mm
or less.
15357
Dark tint (MFG #N2531)
����������������������������������������� $134.99
All prices shown are suggested retail prices.
2
The Wave Windscreen by National Cycle
VStream Windshield by National Cycle
National Cycle’s widely acclaimed VStream windsheilds are now
available for late model FLHT/FLHX riders. The tall and standard
sizes are outstanding highway performers and offer optimum wind
management and comfort. Offered with or without a vent. The low
and ultra low provide the performance of the VStream with a more
custom look. Made of Quantum hardcoated polycarbonate.
PERFORMANCE
The typical airflow pattern of the wake from most windshields
is called a van Karman vortex. At speeds of 50-90 mph, the air
swirls off the windshield in an approximate 90-degree segment
of rotation, hits the bottom of the rider’s neck on the way up,
and curves off the shoulder at approximately 45 degrees. We
gave the VStream its name for the shape it takes at the upper
edge. The patented V shape is so quiet because it pushes this
vortex out and away from the side of the rider’s head. The rider’s
helmet then resides in still air, and the passenger’s environment is
greatly improved as well. Of course, with small sporty screens of
different sizes, the effect on the rider will vary, but there is always
a notable difference in quietness and comfort!
STRENGTH
VStream windshields deliver unprecedented durability and optical clarity through the use of 4.56.0mm thick Lexan polycarbonate with FMR hardcoating or our exclusive Quantumô hardcoating.
For All FLHT/FLHX Models from 97-13
603483 Ultra low, dark tint 7.25”�������������������������������������������������������������������������������������������������������������������� $99.99
National Cycle’s new Wave is a great looking windscreen for
riders that want that custom look. Like almost all National Cycle
windscreens, they’re made from impact resistant polycarbonate
with their exclusive Quantum hardcoating for unbeatable scratch
resistance. It’s stylish... sleek... and sexy. It’s the new Wave. Ride it!
For All FLHT/FLHX Models from 96-13
603582 Low, Dark tint windscreen (measured from top of fairing)
5.25” tall ������������������������������������������������������������������������������������ $129.99
603580 Tall, Clear windscreen (measured from top of fairing) 10.00”
tall ���������������������������������������������������������������������������������������������� $149.99
603580
603582
All prices shown are suggested retail prices.
WWW.CUSTOMCHROME.COM
3
Windshield & Accessories by National Cycle
23822
33100
Touring
H: 20"-21 1/2"
W: 21 1/2
Touring Heavy Duty
The Touring Heavy Duty offers plenty of
height and width for outstanding wind,
rain, and bug protection. The classic
look ensures the shield enhances the
front end of your bike.
33100
Windshield ONLY (MFG
#N2210); mounting kit sold
below�������������������������������� $199.99
Triple Holdster for Heavy Duty Windshields
Windshield Mounting
Grommet
Designed to replace the rubber
mounting grommet on Road King and
Softail models equipped with a factory
windshield.
688644 Windshield grommet (ea) �� $4.99
National Cycle's Triple Holdster provides extra storage for road trips or every day
riding. The heavy gauge synthetic leather conforms easily around the windshield
or instrument cluster and is both durable and weather resistant. The center pouch
measures 11 1/2" x 5" x 3" deep, and the side pouches measure 4 1/2" x 4 1/2" x 3"
deep.
23822
Fits Touring, Chopped and Beaded Heavy Duty and OEM 57996-60A, 58018-86
and 58193-94 windshields����������������������������������������������������������������������������������� $104.99
All prices shown are suggested retail prices.
4
630127
630120
630129
630124
2000HD-EFI Tuner by Dynatek
• The new Dyna 2000-HDEFI is an ignition and fuel injection control module
that plugs in line with the bike’s stock ECM. It uses original equipment style
connectors, so no splicing or cutting of the harness is required.
• Ignition Timing Control- Significant horsepower can often be made by making
timing adjustments as well as being able to correct detonation problems that
may occur. You can advance or retard your stock timing curve by +/- 10 degrees
using the included Control Center software.
• Fuel Control- The Dyna 2000-HDEFI allows for very specific fuel adjustment of the
entire range of throttle openings and rpm combinations. Adjustments can also
be based on additional inputs such as cylinder head temp or gear position
• Increased Rev Limit- The rev limiter is raised to 6200 RPM.
• Compatible with the DynaTune auto tuning kit- The Dyna 2000-HDEFI can be
used with the DynaTune auto tune kit for on the fly automatic fuel adjustment.
630120
630121
630122
630123
630124
630125
630126
630127
630128
630129
630130
630131
2000HD-EFI for 883 XL 07-13 ����������������������������������������������������������������������������� $379.00
2000HD-EFI for 1200 XL 07-13 ��������������������������������������������������������������������������� $379.00
2000HD-EFI for XR1200 09-13����������������������������������������������������������������������������� $379.00
2000HD-EFI for Touring models 08-09 ������������������������������������������������������������� $379.00
2000HD-EFI for Touring models 10-13 ������������������������������������������������������������� $379.00
2000HD-EFI for Softail models 07-11 ��������������������������������������������������������������� $379.00
2000HD-EFI for CAN-BUS Softail models ��������������������������������������������������������� $379.00
2000HD-EFI for FLSTN/FLSTC models 09-11����������������������������������������������������� $379.00
2000HD-EFI for Dyna models 06-11������������������������������������������������������������������� $379.00
2000HD-EFI for CAN-BUS Dyna models ����������������������������������������������������������� $379.00
2000HD-EFI for V-rod models 08-11 ����������������������������������������������������������������� $379.00
2000HD-EFI for V-rod models 2012������������������������������������������������������������������� $379.00
DynaTune Auto Tune Units
630132 Dynatune module for Delphi EFI����������������������������������������������������������������������� $399.99
630133 Dynatune module for CAN-BUS EFI������������������������������������������������������������������� $399.99
All prices shown are suggested retail prices.
WWW.CUSTOMCHROME.COM
5
Bag Lights & Bag Organizer
641988
Compartment Light for
Tour Paks and Trunks
by Hardbagger
641988 is a 6 V surface mount,
battery energized lamp that
requires no wiring or labor to
install. It requires four AAA
641989
batteries (not included).
641989 is a 12 volt, surface
mount dome light with an
on-off switch and battery fused wire harness assembly. The efficient circuit provides
longer life and protection. The eight (8) SMD type LED array allows for a wider light
output dispersion angle up to 150°
641988 LED battery powered compartment light (ea)������������������������������������������������� $20.99
641989 LED 12V compartment light (ea)������������������������������������������������������������������������� $64.99
Top Shelf Saddlebag Organizer
If you have ever dug through your saddlebags only to find your mangled sunglasses, cell phone, keys or cigarettes on the bottom of the bag, then the Top Shelf
Hard Bag Organizer is for you! This custom-molded plastic tray is just 3” deep and
can store your valuables at the top of your saddlebag for quick and easy access.
There is also an optional 12v power plug that can be installed into the tray so you
could charge or power up your electronics on the go! As well as a foam insert you
can shape to hold your valuables from moving around. The unit takes less than a
minute to install and includes the organizer tray, Grip rubber floor mat, oversized
bail head washer and instructions. Designed to fit all OEM hard bags from 93-13.
Made in the U.S.A.
641984 Top shelf organizer for 93-03 Touring models with hard bags, Right side������ $42.99
Accessories
641982 Replacement rubber floormat������������������������������������������������������������������������������� $9.99
All prices shown are suggested retail prices.
6
600783
Custom Handlebar Risers
Jammer Vintage Style
Colored Handlebar Grips
For late Big Twins and Sportster models
from 74-12 (except 08-12 Touring
models and models with handlebar
air reservoir). Left side grip is 1" I.D.
and the right side grip is 1 1/8" I.D.
for use with throttle assembly. A great
look when matched with our "Slim
Line" or "Old School" solo seats, EZ
P-Pads, bicycle style kicker pedals and
floorboard mats! Sold in pairs.
111122 Black�������������������������������������� $9.99
Chrome and Rubber Cruiser
Grips
These grips offer a classic black rubber
surface that offers plenty of comfort
and grip, while the chrome end caps
give them the finishing touch.
604932 Chrome & Rubber Cruiser
Grips, fits 08-12 Touring models
with electronic throttle by wire
���������������������������������������������� $22.99
600789
600781
These risers are CNC-Machined from forged aluminum and feature a smooth top
with hidden hardware. They are available in a variety of lengths in either a chromeplated or gloss black finish. Designed for use with handlebars that have a 1”
clamping area. Sold in pairs.
Chrome
600781 4” smooth top risers, chrome����������������������������������������������������������������������������� $117.99
600782 6” smooth top risers, chrome����������������������������������������������������������������������������� $124.99
600783 8” smooth top risers, chrome����������������������������������������������������������������������������� $139.99
600784 10” smooth top risers, chrome��������������������������������������������������������������������������� $159.99
Black
600786
600787
600789
4” smooth top risers, black��������������������������������������������������������������������������������� $117.99
6” smooth top risers, black��������������������������������������������������������������������������������� $124.99
10” smooth top risers, black������������������������������������������������������������������������������� $159.99
All prices shown are suggested retail prices.
WWW.CUSTOMCHROME.COM
7
Mirrors & Hand Controls
604938
Rad II Teardrop
Mini Oval
Black Ness-Tech Micro DieCast Mirrors
• Small stylish designs for custom
applications
• Black anodized die-cast construction
• Hardware for Harley and Cruiser
models
• Sold each
648346 Mini Oval - left������������������ $49.99
648347 Mini Oval - right���������������� $49.99
688212
Skull Lever Sets for Big
Twins
Skull end chromed aluminum levers for
use with OEM style controls. Fit all Big
Twins from 72-11 except 08-up Touring
models. 688212 Skull lever set for 96-11 Big
Twins (except 08-up Touring)
���������������������������������������������� $35.99
Ness-Tech Micro Die-Cast
Mirrors
• Small stylish designs for custom
applications
• Chrome-plated die-cast construction
• Feature convex glass for greater
visibility
• All necessary installation hardware
included
• Available in three different styles
648326
648327
Chrome Spur Grips
Chrome-plated die-castings with a
diamond shaped smooth rubber inserts.
They are a perfect match to our Chrome
Spur footpegs.
604938 Diamond Grips, fits all 08-12
Touring models with throttle
by wire����������������������������� $24.99
Left Rad II Mirror ����������� $49.99
Right Rad II Mirror��������� $49.99
See our Hand Controls Section
in our 2013 catalog for more!
All prices shown are suggested retail prices.
8
688054
688053
Chrome
or Black
Cast EarlyStyle Outer
Primary
Covers
55485
602217
Reinforced
outer primary covers for 4-speed Big Twin and 5-speed Softail
models from 70-88. The starter shaft support bearing is installed
and additional thrust washers are provided for belt and chain drive.
Ready to mount on 8-hole primaries with flat boss for ninth hole. FL
cover has floorboard mounting tab. Chrome hardware included.
688053 Black primary cover fits 4-speed FX and 5-speed Softail models
from 71-88 (small dowel pins) ���������������������������������������������� $169.99
688054 Black primary cover fits 4-speed FL models from 70-84 with
chain final drive������������������������������������������������������������������������ $169.99
Chrome Late
Sportster Primary
Cover
Santee 1” Wide and Low Handlebars
Polyurethane
Handlebar Damper
Kit by Arlen Ness
Polyurethane bushings
have excellent vibration
damping without the
mushy feel of rubber
dampers. Includes inner
sleeves and chrome
washers. Fits most models
from 73-12.
05846
Complete kit
1” steel handlebars, works with either early or late model style
controls (except throttle-by-wire models). Available in different
widths to optimize comfort and in either a chrome-plated or black
powder coated finish.
82-12 models (except 08-12 Touring)
55485
32” wide Drag bar, Chrome ���������������������������������������������������� $27.99
602217 36” wide Drag bar, Black���������������������������������������������������������� $29.99
������������������� $29.99
Dress up your late Sportster
with this beautifully
chromed outer primary
cover or accentuate your
black or natural finish
OEM cover with one of our
derby or inspection covers.
605607 Outer primary cover 06-13 XL������������������������������������������������ $235.99
648961
‘Z-Bars’ by Custom Chrome
Constructed from high strength chrome-plated steel tubing in 1.25"
or 1" diameters. The 1.25" version comes drilled and dimpled for
internal wiring. The 1" versions are available either dimpled for
82-up style controls or without dimples for pre-82 style controls or
custom applications (34"wide).
648961 1" dimpled ���������������������������������������������������������������������������������� $79.99
WWW.CUSTOMCHROME.COM
All prices shown are suggested retail prices.
9
Taillights & Plate Frames
Maltese Cross
Taillight
Complete with 12-volt
bulb. Universal mount.
19649
Taillight ����������������������������������������������������������� $15.99
19650
Lens only ����������������������������������������������������������� $4.99
Note: Installation of these accessories may be in violation of FMVSS
Standard #108.
Curved ‘Laydown’
License Plate
Mount
Curvaceous cousin to
our popular CC #13199,
the original laydown
license mount. Not only can this mount be angled to
the profile of the fender, it also follows the radius,
for a tighter, cleaner look. Fits most models Includes
hardware and rubber isolation spacers.
14205
Chrome curved ‘laydown’ license plate bracket
License
Plate
Frame with
Marker
Lights
Chrome license plate frame is made of precision
die-cast aluminum and features integrated vertical
marker lights. Amber lenses with single filament
12 volt bulbs can be wired as marker lights or turn
signals.
240176 Chrome license frame with marker lights
��������������������������������������������������������������������������$47.99
��������������������������������������������������������������������������� $29.99
Cateye
Taillights
The most popular
taillight on the
market! Available
with chrome-plated
die-cast or black
anodized aluminum housings, 12 volt bulb, and
built-in license plate illumination. Mounting
studs are spaced 2" center-to-center for a variety
of applications. E-Mark. Sold each.
19762
Chrome die-cast taillight�������������������$29.99
Cateye
Taillight
by Custom
Chrome
Features a license
plate clear window
to light up your
license plate.
600693 Cateye taillight black housing ������������������� $19.99
Chrome or Black License Plate
Accessories
688074
Black, fits plates measuring 7” wide x 4”-tall
whose hole dimensions are 5 3/4 x 2 3/4 ����� $4.99
All prices shown are suggested retail prices.
10
Mesh Sold
Shown for Separately –
Reference
Only
629331
Custom Chrome Air Cleaner Front Covers
Stage I ‘Big Sucker’ Air Filter Kit by Ness
All-in-one aluminum backing plate features built-in carb support. Breather tunnels at each head
to decrease crankcase pressure. High performance air filter flows better than stockAccepts all oval
or round Original Equipment outer air cleaner covers. Includes the backing plate, high-flow air
filter, chrome banjo bolts, and all necessary hardware.
Big Sucker Kits
Stage I
08-13 FLT Models
618510
$129.99
00-13 Big Twin
except 08-13 FLT
650417
$129.99
Choose any one of these front covers to complete the look of your
Economy or Deluxe Custom Chrome air cleaner assembly. They
also fit Ness Stage 1 Big Sucker kits and Stage 1 Screamin Eagle air
cleaners. A black backing plate and wire mesh is also available to
customize the look.
Custom Chrome Air Cleaner Covers Chrome
629331 Smooth Cross air cleaner cover chrome�������������������������������� $48.99
629335 4-Splade air cleaner cover chrome ���������������������������������������� $48.99
629339 Sidewinder air cleaner cover chrome������������������������������������ $54.99
629341 Prowler air cleaner cover chrome ������������������������������������������ $54.99
All prices shown are suggested retail prices.
WWW.CUSTOMCHROME.COM
11
Headlights & Seat Conversion Kit
Side
Mount
Taillight
Universal
side mount
bracket made
in the USA by
National Cycle. Each kit includes a DOT
approved 12-volt taillight.
19888
Complete kit���������������������� $53.99
688165
Seat shown for reference only
688167
688166
4.5” Chrome Spotlamps
• Swivel style bottom mount
• Different lens styles available
• 55 W H3 type bulb
• 688167 approved as fog lamp
• Sold each
688165 Spotlamp hi-beam clear lens����������������������� $47.99
688166 Spotlamp hi-beam blue lens����������������������� $47.99
688167 Spotlamp fog lamp fluted lens������������������� $45.99
5 1/2"
Bates Style
Headlight
This is a classic bottom mount Bates
style headlight.
Available in a chrome-plated or black
finish. Is EC approved and has an extra
running light for safety.
688020 Chrome headlight������������ $43.99
688021 Black headlight ���������������� $43.99
Solo Seat Conversion Kit for Late Sportsters by
LaRosa Design
Solo Seat mount kit for all 08-12 Harley-Davidson Sportster models,
ready to install, already assembled. Just add the seat of your choice.
Includes:
• Mount Frame
• Front T-Bar
• Barrel Springs
603282 Solo seat kit with 5” springs for 08-09 XL models������������ $195.99
603285 Solo seat kit with 5” springs for 10-12 XL models������������ $216.99
All prices shown are suggested retail prices.
12
SPH10 Bluetooth
Headset and
Intercom by
SENA
The SPH10 is a
Bluetooth v3.0 Stereo
Headset with longrange Bluetooth Intercom designed specifically for outdoor sports activities.
• Stable and secure fit for active condition
• Bluetooth Specification v3.0
• Firmware Upgradeable
• Bluetooth Intercom up to 900 meters (980 yards)
• 4-way Conference intercom
• Multipoint for Mobile Phone + GPS
• Voice Prompts
• Bluetooth stereo headset for Bluetooth audio devices such as MP3 players
• Bluetooth music playback control by AVRCP: play, pause, track forward and track
back
• Easy Headset Controls by versatile Jog Dial
• Sufficient sound level with integrated audio booster
• Bluetooth hands-free for Bluetooth mobile phones
• Bluetooth headset or stereo headset for Bluetooth GPS navigations
• Durable, Sweat and Water resistant for active conditions
• Crystal clear and natural sound quality
• Up to 10 hours talk time, 7 days stand-by time
• Two-year limited warranty
629686 SPH10 Half helmet headset��������������������������������������������������������������������������������� $219.99
Bluetooth Headset/
Intercom by SENA
The SMH10 is a Bluetooth v2.1
Class 1 Stereo Headset with
long-range Bluetooth Intercom,
designed specifically for motorcycles. With the SMH10, you can call hands-free on
your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS
navigations by Bluetooth wirelessly, and have intercom conversations in full duplex
with a passenger or other motorcycle riders.
Bluetooth Specification v2.1
• Bluetooth Intercom up to 900 meters (980 yards)
• Multi-Pair Bluetooth intercom for a 4-person network
• Bluetooth stereo headset for Bluetooth A2DP audio devices such as MP3 players
• Bluetooth music playback control by AVRCP: play, pause, track forward and track
back
• Easy operation by versatile Jog Dial
• Hands-free operation with Bluetooth mobile phones
• Bluetooth headset or stereo headset for Bluetooth GPS navigations
• Stereo music by 3.5mm audio cable
• Water resistant for use in inclement weather
• Up to 12 hours talk time, 10 days stand-by time
• Can be used while charging on road trips (Charge-on-the-Fly) • Individual volume control for each audio source
• Earbud capability option available
629698 SMH10 single unit������������������������������������������������������������������������������������������������� $209.99
All prices shown are suggested retail prices.
WWW.CUSTOMCHROME.COM
13
Exhaust Pipes
Santee “Designer Series”
‘Venom’ Pipes by Big Bear
Choppers
650387
Santee “Designer Series” ‘Skirt Blowers’ Exhaust
by Paul Yaffe Originals
The latest and sickest pipe design from the mind of Paul Yaffe.
Straight up in your face styling with a multi-piece heat shield design
that will totally set your bike apart from the crowd. Includes a set of
velocty stack exhaust tips for a race-ready, all-business look.
600069 For Softail models 86-06, chrome ���������������������������������������� $449.99
651053 For Softail models 12-13, chrome ���������������������������������������� $449.99
651054 For Softail models 12-13, black �������������������������������������������� $459.99
Santee “Designer Series” ‘Y Pipes’ by
John Reed
Created by Custom Chrome’s master designer John
Reed to make a statement and make it with authority.
Available in 1 3/4" and 2" with a tasty show chrome
finish. Unless your neighbors are bikers too, you’re
going to ruffle some feathers with these pipes!
651045 1 3/4” for Softail models 12-13 chrome ��� $239.99
651047 2” for Softail models 12-13 chrome ������� $259.99
651048 2” for Softail models 12-13 black ����������� $229.99
These 2" pipe sets are constructed of
14-gauge seamless tubing and feature
extreme slash cut tips. They come
complete with mounting brackets.
651055 ‘Venom’ for stock Softail
models 12-13�������������������� $279.99
All prices shown are suggested retail prices.
14
Chrome Swingarm Pivot Bolt
Covers for Softail Models
Moroso Suppression Core Plug Wire Sets
Looking for a quality plug wire to replace your stock wires that have seen better
days? Here are some wires that will out perform your stock ones but won’t cost you
an arm and a leg. Proudly made in the USA with the finest materials available.
668274 Fits all FLT, FLHT, FLHR, FLTR models 97-98 ������������������������������������������������������� $15.99
668279 Fits all XL models 04-06 ����������������������������������������������������������������������������������������� $15.99
668277 Fits all XL 1200S models����������������������������������������������������������������������������������������� $29.99
668293 Fits all XL models 58-69 ����������������������������������������������������������������������������������������� $15.99
Moroso 8mm Spiral Core
Plug Wire Sets
Moroso’s Spiral Core Ignition Wire
specifications were conceived and
designed by Moroso engineers
using the latest technology and
finest materials obtainable. When
manufacturers completed the
extrusion process, Moroso Ignition
Wire had achieved unsurpassed
energy transmission, electro-magnetic
interference suppression and dielectric
strength. .The wire has been used successfully on every type of vehicle from
common Street vehicles to Top Fuel Dragsters and NASCAR Nextel Cup Stock Cars.
668287 Fits all XL 1200S models����������������������������������������������������������������������������������������� $35.99
These covers are held in place with set
screws and look great when installed
in conjunction with CC #28266 chrome
rear frame covers. They fit all Softail
models from 84-07 (except Fat Boy and
FLSTN models). Sold in pairs.
688179 Pivot bolt cover for Softails
00-07�������������������������������������$24.99
Fork
Boots
with
Dust
Shields
Here’s just
what is needed to perk up a tired set
of forks. Supple rubber fork boots
with chrome-plated or gloss black
dust shields help make your forks
look like new.
651851 Black, Fits FXR, Dyna &
Sportster models with 39 mm
forks from 88-11 ���������������$19.99
WWW.CUSTOMCHROME.COM
12" Drag Pipe Baffles
These replacement drag pipe baffles are
extra-long. Sold each.
11230
Fits 1 1/2"-diameter pipes���� $6.99
Steel Pipe
Baffles
8"-long universal
steel pipe baffles with
mounting bolt. Sold
each.
280019 Fits 2"-diameter
pipes������������ $4.99
All prices shown are suggested retail prices.
15
670475
Motor
Factory DOT
5 Brake
Fluid
Quickbob Front Fender
This fender compliments our ever popular Quickbob and Fatbob rear fender
kits. It fits 1980 and later FXST, FXSTC
and FXWG models.
699022 Quickbob front fender����$159.99
Ness 1” Lowered Kickstands
• A must when lowering your bike
• Available for both Touring and Softail
models
• Chrome-plated forged steel
631100 Fits 07-12 Softail models���� $79.99
631099 Fits 07-12 Touring models
���������������������������������������������� $79.99
Motor Factory
Motorcycle Brake
Fluid is designed for use with all drum
or disc brakes, stock Harley-Davidson
and high performance aftermarket
systems.
500351 8 oz. bottle (Sold in cases of 6)
���������������������������������������������� $56.99
Motor
Factory
DOT 4
Brake
Fluid
Meets or exceeds FMVSS-116, and SAE
Spec J-1703 specifications for excellent
brake performance.
640090 8 oz. bottle (case of 6) ���� $26.99
SPRING Forward!
670467
670470
18225 Serene Drive, Suite 150
Morgan Hill, CA 95037
www.customchrome.com
Follow Us On:
Medallion 5” Console
Gauge
The Medallion Premium 5” Console
Gauges have all the features you
wished for including a large digital
ribbon tachometer, gear position
1-6, programmable shift telltale,
1-time programmable odometer, 2
trip odometers, low fuel/low voltage/
cruise/security/check engine and ABS
telltales. Dash pod, wiring harness and
instructions are included. The gauges
fit FLHRC models from 04-13 and
Softail (FLST) models from 04-10 and
FXDC, FXDWG and FXDF models from
04-11. 670467 Console gauge, Blue Tradition
������������������������������������������ $399.99
670470
670475
670477
Console gauge, Flames��� $399.99
Console gauge, Skulls ���� $399.99
Console gauge, Tradition
������������������������������������������ $399.99
facebook.com/CustomChromeUSA
@CustomChromeUSA
Any “add-on” or “modified”
emissions-related parts contained
in this brochure that are subject
to anti-tampering laws may or
may not have been evaluated and/or exempted
by CARB. As a distributor, Custom Chrome
makes no representation or warranty with
respect to whether the emissions-related parts
in this brochure are legal for sale, installation
or use in any state unless the part is installed
in a vehicle used only for closed-course
competition. Consult with the manufacturer
as to any such exemptions before purchasing
any add-on or modified emissions-related
parts for non-competition use in California or
elsewhere.
All prices shown are suggested retail prices.
Custom Chrome representatives are here to serve you from
6am to 6pm Monday through Friday Pacific Standard Time
16