THE MIRRORS! - Custom Chrome

Transcription

THE MIRRORS! - Custom Chrome
MAY 2012
DITCH
WHAT'S
HOT
THE SMOKE,
IT'S ALL ABOUT
THIS MAY!
THE MIRRORS!
FEATURED RINEHART EXHAUST PIPES
GRIPS FROM BILTWELL
PAGE 2
LEGENDARY SUSPENSION
PAGE 8
www.customchrome.com
NEW PRODUCTS FROM TECHMOUNT!
1
11 1
Custom Chrome reserves the right to correct printed errors
NEW MIRRORS & FEATURED SPEAKERS
651845
651842
689609
OEM Style Die-Cast Mirrors
A complete selection of die-cast mirrors with one-piece
stems for all models. Each mirror has a flat tinted face.
Sold each.
Short Stem Mirrors
651844 Left, black (replaces OEM 91892-82T)������������ $16.99
651845 Right, black (replaces OEM 91875-82T) �������� $16.99
Long Stem Mirrors
651843 Left, black (replaces OEM 91894-82T)������������ $16.99
651842 Right, black (replaces OEM 91879-82T) �������� $16.99
689610
DCS Amp and Speaker System by Hawg Wired
Screw the wires! It doesn’t get any easier than this. The latest in the DCS line of equipment
raises the bar in the “plug and play” category. This DCS system slams out a clean, clear, and
loud 120 watts RMS and is teamed up with our ZX series 6.5” or SX 5.5” component speakers.
Each system comes equipped with our “Direct Connect” harness that literally eliminates all
wiring. Following in suit with that DCS harness, the speakers are full plug and play as well.
Prepare yourself for the most rewarding 30 min install available.
689609 DCS 5.5” kit, fits all Touring models 98-12 ���������������������������������������������������������������������������$579.99
689610 DCS 6.5” kit, fits all Touring models (except Road Glide) 98-12���������������������������������������$599.99
689611 DCS 6.5” kit, fits Road Glide models 98-12 ���������������������������������������������������������������������������$599.99
6.5” Speaker Adapter Rings
by Hawg Wired
651841
651846
Stock
Replacement
Mirror
Rectangular Mirror
Stamped steel body.
Fits right and left side.
Replaces OEMs 91875-77,
91878-77
651846 Black, sold each
Mirror head measures 2”
x 4 1/4”. Comes complete
with mounting hardware.
Sold each.
651841 Black,
Rectangular
mirror�����������$8.99
689612
689613
Looking for that extra thump and mid
range definition only a 6.5” speaker can
offer? Designed to be a direct replacement to the stock 5.25” rings. Rings are
compatible with stock or aftermarket
replacement grills. Sold in pairs.
689612 Adapter rings 6.5” for Road
Glide�������������������������������������$49.99
689613 Adapter rings 6.5” for Batwing
fairings���������������������������������$49.99
������������������� $8.99
651847
651827
Throttle Clamp
Sets
Chrome die-cast clamp
sets include the upper
and lower clamp with
screws. Available for
single or dual cable
applications.
651827 Black, single
cable clamp set
������������������� $6.99
651828
Black, dual
cable clamp set
������������������� $6.99
All prices shown are suggested retail prices.
22
600549
600545
Custom Mirror
Clamp
This chrome die-cast
2-piece clamp fits all 1"
handlebars and is ideal for
mounting mirrors, turn signals and other accessories
using 5/16" mounting bolt.
651847 Black, sold each
������������������������$7.99
651839
Custom Billet Style Mirrors
• Aluminum Die-Cast construction
• Available in a variety of styles in a chromeplated or black finish
• Sold in pairs; mounting hardware included
Black Mirrors
600545 Vintage, Black���������������������������������� $59.99
600549 Eliptical, Black���������������������������������� $59.99
Late-Style Short Stem
4"-Round Mirrors
Add classic styling to your late-model
bike with our chrome-plated 4"-round
mirrors. They fit all models and feature
threaded stems that come complete
with all required mounting hardware.
Sold each.
651840 Left-side, black (replaces OEM
91931-92T)���������������������������$12.99
651839 Right-side, black (replaces OEM
91930-92T)���������������������������$12.99
PRODUCTS FROM BILTWELL
651801
651803
651802
651804
651825
Custom Throttle Clamps
These custom throttle clamps from Custom
Chrome hold the throttle sleeve in place on
the handlebars and feature smooth styling
and a deep chrome finish. Includes upper
and lower clamps with hardware.
651825 Black, dual cable ��������������������������$6.49
651826 Black, single cable������������������������$6.49
Vibra-Kushion Footpegs
These state-of-the-art chrome-plated footpegs have an innovative design which provides custom styling
and superior comfort. Other features of these pegs include replaceable hollow-core wear-resistant rubber
insert cleats and interchangeable steel mounting clevis’. Fit most early and late-model bikes.
651801 Black Extended toe peg (3 1/2” long)������������������������������������������������������������������������������������������������������������� $10.99
651802 Black Large, male mount����������������������������������������������������������������������������������������������������������������������������������� $34.99
651803 Black Small, male mount����������������������������������������������������������������������������������������������������������������������������������� $28.99
651804 Black Standard length toe peg��������������������������������������������������������������������������������������������������������������������������� $6.99
631112
Biltwell Whiskey Throttle Assembly
’Shorty’ Risers
Custom risers approx. 1” tall avaialble in
either a chrome-plated or gloss black finish.
651821 Black, pair ������������������������������������$47.99
651824
The Biltwell Whiskey throttle is constructed of
CNC-machined 6061 T-6 aluminum and fits all
1-inch O.D. handlebars. Two sets of four different
cable ferrules are included with each full assembly. These plated steel ferrules fit both threaded
and click-in barrel ends on stock Harley cables.
If you don’t run stock H-D cables on your motorcycle, the ferrules provide plenty of options for
custom single- or double-cable assembly.
633238 Whiskey Throttle black�����������������������$99.99
633239 Whiskey Throttle polished�����������������$99.99
633240 Whiskey Throttle Tube�����������������������$49.99
631102
Arlen Ness Rad III Hand Control Kits
Universal Throttle and Grips
Chrome throttle clamp with tension adjustor, includes both handle grips.
651824 Black, Fits 1”-handlebars����������$12.99
641619
Dog Bone Handlebar Top Clamp by
Biltwell
This cast stainless steel dog bone clamp is a great
addition to the Biltwell Slimline risers. They are
perfect for use with taller bars or if you just want
that extra clamping surface and rigidity with a
‘low-key’ clean look. They are available in a polished or black finish and were designed to only
be used with Biltwell ‘Slimline’ Risers.
641619 Black Dog Bone top clamp ���������������$59.99
651823
Replacement 1" throttle assemblies with
adjusting screw. Available for single cable
or dual cable models from 73-81. They also
work on custom applications.
651822 Dual cable assembly for all 81 models and custom applications, black
Fits all 08-11 Touring models with radio,
15mm bore dual disc ������������������������������� $349.95
Fits all 08-11 Touring models with radio &
cruise control, 15mm bore dual disc��$349.95
Replacement Parts
631111 Replacement clutch lever������������������������$27.95
631112 Replacement brake lever������������������������$27.95
654022 Complete 9/16” master cylinder rebuild kit
651800
����������������������������������������������������������$7.99
Single cable assembly for all models
from 74-80, black��������������������������$7.99
��������������������������������������������������������������������$349.95
631530
631531
Chrome Throttle Assemblies
651823
Arlen Ness presents the industry’s first factory replacement full custom hand controls. An evolution of
his popular Rad II hand controls, the Rad III controls
will complement a set of custom handlebars while
still maintaining all your stock switch’s and functions. Complete kits include: master cylinder, clutch
perch, levers, and switch housings (uses your OEM
switches).
631102 Fits all 96-11 FXST, FXD and XL models
(except 04-12 XL models) with 9/16” bore
single disc ������������������������������������������������$349.95
631104 Fits all 96-07 Touring models with radio,
11/16” bore dual disc ������������������������������� $349.95
631529 Fits all 08-11 Touring models (without radio
or cruise control), 15 mm bore dual disc
Vibra-Kushion Footpeg Stirrups
651800
Black, Pair ���������������������������������������������$45.99
����������������������������������������������������������������������$34.95
654023
654024
Complete 11/16” master cylinder rebuild kit
����������������������������������������������������������������������$34.95
Complete 15mm master cylinder rebuild kit
����������������������������������������������������������������������$39.95
All prices shown are suggested retail prices.
33
PUT A PIPE IN IT!
Churchill 2-into-2 Pipes by Rinehart
Churchill Systems for Softails
3000121 86-12 Softail 2 in 2 black with black endcaps ���������������������������������������������������� $789.95
Churchill Systems for Dynas
3000221 06-12 Dyna 2 in 2 black with black endcaps ���������������������������������������������������� $789.95
654025
2-into-2 Softail Pipes by Rinehart
Flush 2-into-2 Systems for Softails
3000102 86-12 Softail 2 in 2 black with black endcaps �����������������������������$749.95
Staggered 2-into-2 Systems for Softails
3000103 86-12 Softail 2 in 2 black with black endcaps �����������������������������$749.95
654027
Soft-Touch Grips
by Arlen Ness
The ultimate in comfort and style for
your bike. The knurled or dimpled
rubber center provides an excellent
gripping surface plus vibration
dampening, Scalloped or Smooth
Billet end caps are machined from
6061-T6 aluminum and chrome
plated or black anodized. Matching
footpegs and brake/shifter pegs also
available.
Fits all 08-12 Touring models
with ‘Throttle-by-Wire’ electric
throttle
654026 Dimpled with smooth end
cap, chrome������������������$59.95
654028 Dimpled with smooth end
cap, black����������������������$59.95
2-into-2 Dyna Pipes by Rinehart
The perfect package of sound and proven
Rinehart power.
Flush 2-into-2 Systems for Dynas
3000202 06-12 Dyna 2 in 2 black with black endcaps������������������������������������������������������$749.95
Staggered 2-into-2 Systems for Dynas
3000203 06-12 Dyna 2 in 2 black with black endcaps ����������������������������������������������������$749.95
Classic Duals by Rinehart
Fits all Models from 76-12
(except 08-12 Touring models
and models with air reservoir in
the handlebars)
654025 Dimpled with smooth end
cap, chrome������������������$59.95
654027 Dimpled with smooth end
cap, black ��������������������$59.95
Bring back the traditional true dual header look on your 09 and
later Touring model and add some state of the art performance
made by Rinehart.
Classic Duals with 3.5” Mufflers
1000310 09-12 Classic Duals 3.5” black with black endcaps $989.95
Twin Cam Cam Covers
2-into-1 Pipes by Rinehart
2-into-1 Systems for Softails
2000201 86-12 Softail 2 in 1 black with black endcaps ����������������������������������������������������$749.95
2-into-1 Systems for Dynas
2000301 06-12 Dyna 2 in 1 black with black endcaps ����������������������������������������������������$739.95
All prices shown are suggested retail prices.
44
Available in either a chrome-plated
or black powder coated finish. A
great replacement cover with a fit
and finish that matches OEM parts.
Hardware included. Fits all 01-12
Twin Cam models (Replaces OEM
#25369-01)
Fits all 01-12 Twin Cam models
(Replaces OEM #25369-01)
628111 Black������������������������������$89.99
688049
LED License Plate Lights
These license plate lights areavailable in two styles and two finishes.
Choose from chrome-plated or black
finish and radius or cone shaped.
Sold each.
688049 Cone black light (ea)��$10.99
FEATURED PRODUCTS FROM TECHMOUNT
652051
with 652063
652058
652063
652052
652053
Accessory Mounting Systems by Techmount
Handlebar Mount Kits
Fits handlebar sizes from 7/8” up to 1 1/4”. Requires only 3/4” of handlebar
space and can be mounted at any angle.
652051 Basic handlebar mount kit black�������������������������������������������������������������$69.99
652052 Swivel handlebar mount kit chrome�������������������������������������������������������$89.99
Control Mount Kits
Control Mount attaches to handlebar control clamps (clutch or brake side).
Replaces the two factory pinch bolts with new stainless bolts and spacers.
652053 Control mount kit black�����������������������������������������������������������������������������$69.99
652054 Control mount kit chrome�������������������������������������������������������������������������$89.99
Mirror Mount Kit
Mirror mounts take advantage of the unused mirror hole found on many HD
touring models.
652055 Mirror mount kit black�������������������������������������������������������������������������������$59.99
Antenna Brackets by
Techmount
Techmount Adapters
For some devices an adapter is required in order to use a Techmount. The
Quick Change adapter allows easy installation and removal of the most
popular devices on the market. Just attach it to your device and slide it on
and off the mount as needed.
652058 Quick change adapter �������������������������������������������������������������������������� $14.99
652059 Garmin Zumo 660 adapter black���������������������������������������������������������� $9.99
652061 Dynojet adapter pin black���������������������������������������������������������������������� $4.99
652062 Dynojet adapter pin silver���������������������������������������������������������������������� $4.99
652063 Gopro adapter������������������������������������������������������������������������������������������ $9.99
Techmount Extensions
Move your device to the exact location
you prefer it to be with these rotating extension shafts. Available in two
lengths and finishes. Sold each.
652064 Techmount 2” (50mm) extension black����������������������������$9.99
652066 Techmount 3” (76mm) extension black����������������������������$9.99
These brackets allow you to mount
XM radio antennas to your bike
securely.
652068 XM satellite radio antenna
bracket��������������������������$14.99
652069 Garmin XM radio antenna
bracket��������������������������$19.99
FRONT
GPS and Phone Cases by Techmount
Keep your devices safe from rain, road grime and other hazards with one of
these water resistant cases.
• A water tight wire port is integrated into the bottom to allow power and
data cables to be routed to the motorcycle.
• Water Tight zipper allows easy access
• Quick detach dual T adapter on the back makes removing the entire case
when not needed, quick (no need to ride around looking at an empty
case).
• Touch screen front panel allows all the touch features to work while inside
the case.
• GPS case includes (4) padded inserts to compensate for the thickness variations in the GPS units. This allows a snug fit for the GPS.
• Phone case includes padded insert to compensate for the thickness variations in the phone or MP3 units. This allows a snug fit for the various sizes
of these devices.
• Molded Neoprene construction
652070 GPS case���������������������������������������������������������������������������������������������������������$24.99
652071 Phone case�����������������������������������������������������������������������������������������������������$24.99
BACK
652070
652071
*Devices shown for reference only
All prices shown are suggested retail prices.
55
NEW ITEMS THIS MONTH!
’Sculpted’ 2-Piece Rocker Box Kit for Twin Cam Models
Screw-In Style ‘Pop-Up’ Gas Caps
Give your gas tank a custom look without having to cut, weld
or re-paint! These caps simply screw into your existing tank
bungs. They fit in nearly flush when closed; opens easily with
just a 1/4 turn of the center of the cap. Billet aluminum construction with either a chrome-plated or wrinkle black finish.
Available for a wide variety of models & years.
Fits 96-11 Models
653087 Pop-Up gas cap set includes one vented & one nonvented gas cap for 96-11 models, wrinkle black ���$57.99
653089 Vented Pop-Up gas cap for 96-11 models, wrinkle black
(sold each)�����������������������������������������������������������������������$29.99
653091 Non-vented Pop-Up gas cap for 96-11 models, wrinkle
black (sold each) �����������������������������������������������������������$29.99
Fits 82-95 Models
653086 Pop-Up gas cap set includes one vented & one nonvented gas cap for 82-95 models, wrinkle black ���$57.99
600242 Vented Pop-Up gas cap for 82-95 models, chrome (sold
each)���������������������������������������������������������������������������������$29.99
653088 Vented Pop-Up gas cap for 82-95 models, wrinkle black
(sold each)�����������������������������������������������������������������������$29.99
653090 Non-vented Pop-Up gas cap for 82-95 models, wrinkle
black (sold each) �����������������������������������������������������������$29.99
Elevate your motor to an art form with this elegant design. The installation of these covers
dramatically alters the appearance of your Twin Cam engine giving it a totally custom
look. Includes chrome-plated or black satin powder painted die-cast aluminum rocker box
covers, with chrome hardware, chrome bolt caps and gaskets. Fits all Twin Cam models
from 99-12. Sold in pairs.
683459
641616
Ripple CV Carb Top by Biltwell
Plastic is for toys, not motorcycles! Replace
that fugly stock carb top in about five
minutes with just a screw driver. These sweet
units are available in cast aluminum, gloss
black powdercoat or in a fully polished,
cast stainless steel. They are machined after
casting to ensure accurate sealing, but the
edges are left raw for that unique cast look.
Fits 90-06 Big Twins and 88-06 Sportsters.
641616
641612
Black Satin Powder Painted ��������������������������������������������������������������������������������������������� $269.99
Ripple CV carb top, black�����������$29.99
Custom Bullet Marker Lights
Black
688063
688065
688064
688066
Red (single filament bulb)� $9.99
Amber (single filament bulb)
������������������������������������������������� $9.99
Red (dual filament bulb) ��� $9.99
Amber (dual filament bulb)
������������������������������������������������� $9.99
Note: Designed as supplemental lighting ONLY, not
to replace Original Equipment running lights or turn
signals.
641613
Ripple Points Covers by Biltwell
A timeless design that will fit the look of multiple styles.
These points covers are available in either a cast aluminum
with gloss black powdercoat finish or a cast Stainless Steel
with a polished finish. They come in either a 2 or 5-hole
patterns to fit most Big Twins and Sportsters from 70-12.
5-Hole for all 99-12 Twin Cam models
641613 5-Hole Ripple points cover, Black������������������������������ $29.99
2-Hole for all 70-98 Big Twin & 70-12 Sportster models
641612 2-Hole Ripple points cover, Black������������������������������ $29.99
All prices shown are suggested retail prices.
66
651854
Chrome Fuel Filter
Small size, but packs big protection for your
motor. Easily cleaned, reusable screen.
651855 For 5/16" fuel line ������������������������ $6.99
651854 For 1/4" fuel line �������������������������� $6.99
688081
Point Covers
Fits all Sportster and Big Twin models
70-03 (except Twin Cam models).
688081 Black, Plain (repl. OEM 3258285T)����������������������������������������� $5.99
BARS FROM SANTEE
697163
Santee Designer Series ‘Bonanza’
Handlebars by Fred Kodlin
These are the latest new and improved
design Bonanza Bars II from Fred Kodlin of
Murdercycles. They are available in a ‘Flat’,
'Low', ‘Medium’, ‘High’, and in a Touring version
and are available in either a chrome-plated or
black finish. Dimpled and drilled for internal
wiring designed for use with 96-12 style handlebar controls.
609625
‘O/S’ Chrome Highway Bars
Black Front 1 1/4“-Diameter Highway Bars
609625 Fits FL Softail models from 00-11, black
�������������������������������������������������������������$138.99
609626
609628
Fits FX Softail models from 00-10, black
�������������������������������������������������������������$138.99
Fits all Dyna Glide models (except Dyna
Wide Glide models) from 91-05, black
�������������������������������������������������������������$137.99
Bonanza Bars II - Wide Version
697162
'High' wide Bonanza II, Black (36" wide,
15" rise, 12" center, 5 1/2" pullback, 1"
dia.)����������������������������������������������������� $129.99
697163
'Medium' wide Bonanza II, Black (36"
wide, 13" rise, 12" center, 5 1/2" pullback, 1" dia.)������������������������������������� $119.99
Santee Designer Series ‘Bonanza’
Highway Bar by Fred Kodlin
This is the latest from Fred Kodlin and the Murder
Cycles crew. These highway bars are the perfect
match to the ‘Bonanza’ handlebar series. The
Highway Bars feature 1 1/4” steel tubing with
built-in peg mounts so there is no need for those
bulky clamps. They are available in a chromeplated or black powdercoated finish.
Black
697175
697169
651850
Chrome Fork Tins
for FL Softail Models
Gloss black finish. Fits all 86-12 FLST, FLSTC,
FLSTF and 93-12 FLSTN (05-12 FLSTN will not
work unless OEM light bar is removed), mounting hardware Included. Available with or without fork slider covers.
‘Bonanza’ highway bar for 09-12 Touring
models (except FLTR Road Glide models),
black�������������������������������������������������������$259.99
‘Bonanza’ highway bar for 97-08 Touring
models (except FLTR Road Glide models),
black�������������������������������������������������������$259.99
Note: Models equipped with accessory front passing lamps may
need to drill a hole in rear panel to mount the on/off switch.
Black
651849
Optional Footpeg Clevises (required if you
want to run highway pegs)
652026 Black 3/8”-20 clevis, sold in pairs�������$19.99
Black headlight tins 3-piece kit (repl.
OEMs 67808-86, 67816-86 and 6782086)���������������������������������������������������������$53.99
‘Laydown’ License Plate Mounts
Chubby Outlaw ‘Z’ Apes
5 1/2" Round Air Cleaners
High-performance round air cleaners for Bendix/
Zenith, Keihin (except CV) and Tillotson carbs.
12026
Plain chrome round air cleaner ���������$27.99
688079 Plain black round air cleaner �������������$29.99
11912
Replacement filter�����������������������������������$7.49
Outlaws are perfect for narrow glide and midglide front ends or for an Outlaw look on Softails,
Road Kings and Road Glides. Designed with
the perfect wrist angle for optimum comfort
and available in a 10”, 12” and 14” tall version
in either a chrome-plated or black semi-gloss
powder coated finish. Made in the U.S.A.
Black
32.5” wide 8” pullback 8” center width
693769 14” rise Outlaw ‘Z’ Apes, black �������$229.99
693767 12” rise Outlaw ‘Z’ Apes, black �������$224.99
693765 10” rise Outlaw ‘Z’ Apes, black �������$219.99
660751
Black original-style ���������������������������$24.99
688074
Chrome or Black License Plate
Accessories
688074
Black, fits plates measuring 7” wide x
4”-tall whose hole dimensions are 5 3/4
x 2 3/4�����������������������������������������������������$4.99
All prices shown are suggested retail prices.
77
18225 Serene Drive, Suite 150, Morgan Hill, CA 95037
RUSH TO
T
N
E
M
T
R
A
P uct if not given
E
D
S
T
R
A
P
elf Destr
will S
t
n
e
m
u
c
o
tment.
r
D
a
p
e
D
s
t
r
to Pa
Follow Us On:
facebook.com/CustomChromeUSA
@CustomChromeUSA
Legend Air L3 & L9 Compact-Style
Softail Suspension Kits
For 00-11 FXST/FLST models (L3 Series)
697106 Black L3 ����������������������������������������� $1,599.99
Legend Air L2 & L8 Softail
Suspension Kits
All prices shown are suggested retail prices.
88
Custom Chrome® reserves the right to correct printed errors
Copyright© 2011 Custom Chrome A Division of DAE-IL USA, Inc.
For 00-11 FXST/FLST models (L2 series)
697104 Black L2 ���������������������������������������$1,199.99
Presorted
Standard
U.S. Postage
PAID
D-Mail Inc.