professional quality pliers

Transcription

7" Ergo Handle
PL7222
5" Standard Handle
Soft Flex™ Flush Cutters
PL5222
You can expect long cutting life from these top quality tools, which are
made in the USA. Designed to cut all sizes of Soft Flex™ wire, they also
cut stainless steel, tungsten and nickel wire, up to .015mm. The blade
exceeds a Rockwell hardness of 64. Both cutters feature a comfortable,
cushioned grip which aids in distributing cutting pressure more
effectively. The PL7222 features an extra long handle to make it even
more comfortable. Comparable to the best cutters on the market.
CUTTING CAPACITY SOFT COPPER WIRE DIAMETER
0.15mm–1.00mm, .006"-.040"
Item #
PL5222
PL7222
Description
Flush Cutter with Standard Handle
Flush Cutter with Ergo Handle
The Safety Tip Protector
All Tronex are supplied with a unique plastic protector for the tip.
It “puts the tool safely to bed” when it’s not being used. It prevents
chipping of the tip from accidental dropping and can prevent the
exceptionally sharp edges from injuring an operator.
Length
5"
7"
Tronex
Razor Flush® Cutters
Flush
There is no bevel on either cutting edge. The backside is absolutely flat at an angle of 45˚ to
the plane of the cutting surfaces. The exceptionally sharp edges produce cuts with virtually no
raised surface on the cut lead. Also, minimum shock is imparted to the cut lead or component.
However, more frequent sharpening is required with a Razor Flush® cutter. The Razor Flush®
edge is executed by a proprietary process & thus unmatched by any other precision cutting tool
in the world. The pointed head allows for increased cutting access yet has sufficient strength to
avoid tip breakage when used within its capacity. Will cut soft copper wire ranging from .004”.035” (0.10–0.90mm) diameter.
Item #
PL5223
PL7223
Description
Razor Flush Cutter with Standard Handle
Razor Flush Cutter with Ergo Handle
Length
5"
7"
Tronex
Chain Nose Pliers
Tronex
Flat Nose Pliers
Tronex
Round Nose Pliers
Feature a very fine tip (.060" x .050"), “eased”
inner edges, and
extended gripping
power. Tronex
chain nose pliers
have flat-faced
inner jaws.
The Tronex flat nose plier features
a very fine tip,
smooth jaws &
“eased” inner
edges. Each of the
two tips measures
3.4mm x 1.5mm.
Features very fine tips. Each of the two tips is
.030" in dia. The
very long jaw of
the Tronex round
nose plier, 1.3",
allows for an
increased range
of loop diameters,
from .030"- .250"
to be formed.
The long jaw
also can provide
increased access.
Item #
PL5110
PL7110
PL5310
PLIER
DIAGRAM
KEY
Description
Chain Nose Plier with Standard Handle
Chain Nose Plier with Ergo Handle
Round Nose Plier with Standard Handle
Chain
Nose
Flush
Cutter
SemiFlush
Cutter
Length
5"
7"
5"
Flat
Nose
Item #
PL7310
PL5410
PL7410
Hollow
Round
Description
Round Nose Plier with Ergo Handle
Flat Nose Plier with Standard Handle
Flat Nose Plier with Ergo Handle
Flat
Round
Half-round
Flat
Length
7"
5"
7"
Round
Nose
49
German Series
(Best Quality)
By combining the finest steel and materials with a European dedication to superior quality, German pliers have become world
renowned as the jewelers tool of choice. We are proud to offer our best selling Slimline German pliers, with both Boxjoint and
Lapjoint constructions. These tools feature amazing durability, comfortable handles and are meant for long term repeat usage.
They will become and integral part of any serious jewelry makers repertoire.
Boxjoint, Slimline, 120mm (4.75")
Our Best selling German series! Extra fine tips, PVC
cushion grip, with double leaf spring. Excellent for
light and light to medium work!
1
2
16PCSD
3
Item #
1. 10PCSD
2. 14PCSD
3. 16PCSD
4
5 Semi-flush
Description
Chain Nose, Boxjoint with Spring
Round Nose, Boxjoint with Spring
Flat Nose, Boxjoint with Spring
Length
4.75"
4.75"
4.75"
6 Flush
Item #
4. 18PCSD
5. 41PCSD
6. 51PCSD
Description
Bent Chain Nose, Boxjoint w/ Spring
Semi-flush Side Cutter, Boxjoint with Spring
Flush Cutter, Boxjoint with Spring
Length
4.75"
4.75"
4.75"
German Ergonomic Series 120mm (4.75")
Our best selling range of German pliers are now available with a special
ergonomic cushion grip.Which helps to reduce fatigue and increase
efficiency. Box joint construction, with a double leaf spring, 120mm.
1
2
3
4
5 Semi-flush
6 Flush
ER14
Item #
1. ER10
2. ER14
3. ER16
4. ER18
5. ER41
6. ER51
50
Description
Chain Nose with Ergo Handle and Spring
Round Nose with Ergo Handle and Spring
Flat Nose with Ergo Handle and Spring
Bent Chain with Ergo Handle and Spring
Semi-flush Side Cutter with Ergo Handle and Spring
Side Cutter Flush with Ergo Handle and Spring
Length
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
German Boxjoint, 130mm (5")
High quality pliers which are ideal for medium
and light heavy work. PVC grip.
1
Item #
1. 100PC
2. 106PC
3. 104PC
2
3
Description
Chain Nose, Smooth, Box Joint
Round Nose, Smooth, Box Joint
Flat Nose, Smooth, Box Joint
5
4 Semi-flush
Length
5"
5"
5"
Item #
4. 40PC
5. 87PC
Description
Semi-flush Side Cutter, Box Joint
Bent Chain Nose, Box Joint (Not Shown)
Length
5"
5"
German Lapjoint, 120mm (4.75")
PVC grip.
1,2,3 & 4
5&6
7&8
38PC
9
10
11 Semi-flush
Item #
1. 88PC
2. 89PC
3. 88PCSD
4. 89PCSD
5. 90PC
6. 90PCSD
7. 91PC
8. 91PCSD
9. 92PC
10. 94PC
11. 38PC
Description
Short Nose, Chain Nose, Smooth
Short Nose, Chain Nose, Serrated
Short Nose, Chain Nose, Smooth w/Spring
Short Nose, Chain Nose, Serrated w/Spring
Chain Nose, Long Jaw, Smooth
Chain Nose, Long Jaw with Spring
Chain Nose, Long Jaw, Serrated
Chain Nose, Long Jaw, Serrated w/Spring
Round Nose, Smooth, Lapjoint
Flat Nose
Side Cutter
Length
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
German Boxjoint, Extra Long
Nose 140mm (5.5")
PVC grip.
1&2
3
102PC
Item #
1. 102PC
2. 103PC
Description
Chain Nose, Smooth, Boxjoint
Chain Nose, Serrated Jaw, Boxjoint
Length
5.5"
5.5"
Item #
3. 108PC
Description
Round Nose, Smooth, Boxjoint
Length
5.5"
51
economy pliers
PL600 Series
Super Slim Line, 115mm (4.5")
These 4.5", 115mm, boxjoint pliers are
wonderful for close-up precision applications.
Available with or without springs. You will not
believe the quality of these tools. The tips are
the finest we have in our line. Excellent for
small hands! PVC grip.
1, 2 & 3
4 & 5 Semi-flush
PL600 Series - Without Spring
Item #
2. PL610
5. PL611
7. PL614
9. PL616
11. PL618
6&7
8&9
10 & 11
Description
Super-fine Chain Nose without Spring
Super-fine Semi-flush Side Cutter without Spring
Super-fine Round Nose without Spring
Super-fine Flat Nose without Spring
Super-fine Bent Chain Nose without Spring
Length
4.5"
4.5"
4.5"
4.5"
4.5"
PL600 Series - With Spring (shown)
Item #
1. PL650
3. PL653
4. PL651
6. PL654
8. PL656
10. PL658
PL650SET
LPOUCH3
Description
Length
Super-fine Chain Nose with Spring
4.5"
Super-fine Serrated Chain Nose with Spring
4.5"
Super-fine Semi-flush Side Cutter with Spring
4.5"
Super-fine Round Nose with Spring
4.5"
Super-fine Flat Nose with Spring
4.5"
Super-fine Bent Chain Nose with Spring
4.5"
Plier Set: PL650, PL651, PL654 & PL656 in leatherette case
Empty black leatherette case, 9" x 6.5" x 1.25", 9 bands (see page 113)
PL660 Series
Super Slim Purple Plier Line, 115mm (4.5")
This line of pliers features four 4.5" plier types with Super-fine tips: Chain Nose,
Round Nose, Flat Nose, Bent Chain Nose and Side Cutter. All pliers feature bar
coded retail-ready BeadSmith packaging with hanger-holes. Additional features:
• Polished steel heads
• PVC handles
• Boxjoint construction
• Double-leaf spring for smooth operation
1
2 Semi-flush
PL664
3
4
5
Item #
1. PL660
2. PL661
3. PL664
4. PL666
5. PL668
PL660SET
LPOUCH4
52
Description
Length
4.5" Super-fine Chain Nose w/Spring
4.5"
4.5" Super-fine Semi-flush Side Cutter w/Spring
4.5"
4.5" Super-fine Round Nose w/Spring
4.5"
4.5" Super-fine Flat Nose w/Spring
4.5"
4.5" Super-fine Bent Chain Nose w/Spring
4.5"
Plier Set: PL660, PL661, PL664 & PL666 in leatherette case
Empty Purple leatherette case, 9" x 6.5" x 1.25", 9 bands (see pg. 113)
economy pliers
PL700 & PL800 Series: Slim Line 120mm (4.75")
An exciting duplication of our most popular German series. These 4.75", 120mm,
boxjoint pliers are available with or without a double leaf spring. Much sleeker
than our other economy models! PVC grip.
1&2
3&4
5&6
7&8
9 & 10
11 & 12
Semi-flush
PL716
PL700 Series, Red Handle - With Spring (shown)
Item #
1. PL710
3. PL711
5. PL714
7. PL716
9. PL718
11. PL741
PLIDSET
Description
Slimline Chain Nose with Spring
Slimline Chain Nose Serrated with Spring
Slimline Round Nose with Spring
Slimline Flat Nose with Spring
Bent Chain Nose with Spring
Semi-flush Side Cutter with Spring
Color coded PL700 4-pc. plier set w/pouch (see pg. 54)
PL800 Series, Blue Handle - Without Spring
Length
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
Item #
2. PL810
4. PL811
6. PL814
8. PL816
10. PL818
12. PL841
Description
Slimline Chain Nose
Slimline Chain Nose Serrated
Slimline Round Nose
Slimline Flat Nose
Bent Chain Nose
Semi-flush Side Cutter
Length
4.75"
4.75"
4.75"
4.75"
4.75"
4.75"
PL10 Original Economy Series
Our original set of economy pliers with PVC grip. These
tools are similar to PL700 series (shown above).
1&2
3&4
5
PL16
6
7
8
Item #
1. PL10
2. PL104
3. PL14
4. PL144
5. PL16
6. PL18
7. PL1020
8. PL1080
Description
Chain Nose Economy
Chain Nose Economy Micro
Round Nose Economy
Round Nose Economy Micro
Flat Nose Economy
Bent Chain Nose Economy with black handle
Long Chain Nose Economy
Long Round Nose Economy
Length
4.75"
4.5"
4.75"
4.5"
4.75"
4.75"
5.5
5.5"
53
economy pliers
PL500 Series: 115mm (4.5")
A good choice for a professional tool at a very
good economy price. PVC grip.
1
2
4 Semi-flush
5
3
PL511
Item #
1. PL512
2. PL513
3. PL511
4. PL515
5. PL514
Description
Chain Nose with Spring
Round Nose with Spring
Flat Nose with Spring
Semi-flush Side Cutter with Spring
Bent Chain Nose with Spring
“COLOR I.D.“ Series Color Coded Pliers (4.75")
Length
4.5"
4.5"
4.5"
4.5"
4.5"
1 Semi-flush
2
3
4
2
3
How many times have you reached for the wrong plier because
all of the handles are the same color? To alleviate such confusion,
we’ve put together a plier set in which every plier has a different
color handle! The set includes our best selling PL700 series with
a new variation of handle colors:
• Round Nose = purple handle
• Chain Nose = red handle
• Flat Nose = pink handle
• Side Cutter = white handle
The black leather pouch (LPOUCH3) measures
9" x 6.5" x 1.25", and has additional elastic
bands to accommodate extra tools!
Item #
1. PL721
2. PL724
3. PL726
4. PL710
PLIDSET
LPOUCH3
Description
Semi-flush Side cutter with white handles
Round nose plier with purple handles
Flat nose plier with pink handle
Chain nose with red handle
Color coded PL700 4-pc. plier set with leatherette pouch
Empty black leatherette case, 9" x 6.5" x 1.25", 9 bands (see pg. 65)
Long Handle Series, 6"
1
Longer handles mean better leverage!
This series features lapjoint construction
with a double leaf spring and PVC grip.
An excellent economy range.
Compare the size of our Long
Handle plier (T072) against a
4.5" Round Nose plier from
our PL500 Series (PL513).
PL513
54
Length
4.75"
4.75"
4.75"
4.75"
4.75"
TO72
Item #
1. T072
2. T073
3. T074
Description
Chain Nose with Long Handle
Round Nose with Long Handle
Bent Chain Nose with Long Handle
Length
6"
6"
6"
economy pliers
PL200 & PL300 Heavy Duty Series: Boxjoint, 5"
Our new 130mm economy pliers are for customers doing heavier work. Boxjoint
construction, double leaf spring, 5" in length with PVC grip.
1 Semi-flush
2
3
4
PL314
PL200 Series: Yellow Handle-No Spring
Item #
1. PL211
2. PL214
3. PL216
4. PL210
PL300 Series: White Handle with Spring (shown)
Description
Semi-flush Side Cutter with Yellow PVC Grip
Round Nose with Yellow PVC Grip
Flat Nose with Yellow PVC Grip
Chain Nose with Yellow PVC Grip
Length
5"
5"
5"
5"
Item #
1. PL311
2. PL314
3. PL316
4. PL310
Description
Side Cutter with Springs with White PVC Grip
Round Nose with Springs with White PVC Grip
Flat Nose with Springs with White PVC Grip
Chain Nose with Springs with White PVC Grip
Length
5"
5"
5"
5"
!
ER650 Ergonomic Series New I tems
Super-Fine Ergo 4-pc. Plier Set
Includes: Chain Nose, Round
Nose, Flat Nose and Side Cutter.
Plus a Leatherette Carry Case!
• Polished Steel Heads
• Double Leaf Springs
for smooth operation
• Ergnomic Grips
• Boxjoint Construction
ER650SET
Deluxe Beader’s Tool Set
with Ergonomic Pliers
Includes: Ergo Chain Nose, Ergo
Round Nose, Ergo Side Cutter,
Ergo Nylon Jaw Flat Nose,
Crimping Plier, Ergo Knot Cutter,
Knotting and Split Ring Tweezers
and ScoopEEZ® Bead Scoop.
Plus a Leatherette Carry Case!
ER650SET
ER9SET
ER9SET
1
Item #
1. ER650
2. ER651
3. ER654
4. ER656
2 Semi-flush
Description
Super Fine Ergo
Super Fine Ergo
Super Fine Ergo
Super Fine Ergo
3
Chain Nose Plier
Semi-flush Side Cutter Plier
Round Nose Plier
Flat Nose Plier
4
Item #
5. ER566
6. ER658
ER650SET
ER9SET
5
6
Description
Super Fine Ergo Double Nylon Jaw Flat Nose Plier
Super Fine Ergo Bent Chain Nose Plier
4-pc. Super Fine Ergo Plier Set
Deluxe Beaders Ergo Tool Kit
55
economy pliers
Ergonomic Series: Boxjoint, 130mm (5")
The newest family in our ergo series offers “German-like” quality at economy prices. Customers who have seen
these tools can not believe we can offer professional quality tools at these incredible prices. Fine micro-precision
tips with ergonomic comfort handles. Box joint construction, double leaf spring. 5" in length.
1
2
6 Semi-flush
7 Semi-flush
3
4
Item #
1. ER910
2. ER914
3. ER916
4. ER918
5. ER941
6. ER945
7. ER984
8. ER900
5 Semi-flush
Description
Chain Nose w/ Ergo Handle
Round Nose w/ Ergo Handle
Flat Nose w/ Ergo Handle
Bent Chain Nose w/ Ergo Handle
Semi-flush Side Cutter w/ Ergo Handle
Semi-flush Pointed Side Cutter w/Ergo Handle
Semi-flush End Cutter
Five Piece Set (not shown): ER910, ER914, ER916, ER918, ER941
Length
5"
5"
5"
5"
5"
5"
5"
5"
Super Economy Ergo Series, 4.75"
Our popular line of Super Economy pliers (PL1) is now
available with comfort grip ergo handles.
1
Item #
1. ERPL6
2. ERPL4
3. ERPL41
2
3 Semi-flush
Description
Flat Nose with Ergo Handle
Round Nose with Ergo Handle
Side Cutter (semi-flush) with Ergo Handle
Length
4.75"
4.75"
4.75"
4
Item #
4. ERPL8
5. ERPL1
ERPLSET
5
Description
Bent Chain Nose with Ergo Handle
Chain Nose with Ergo Handle and Cutter
Five Piece Set-includes all of the above
Length
4.75"
4.75"
4.75"
Merry Grip (Japanese)
These quality Japanese pliers have a unique palm fitting handle. Women,
in particular, find these tools very comfortable to work with. PVC grip.
1 Semi-flush
Item #
1. MG1
2. MG2
3. MG3
56
2
Description
Merry Grip Semi-flush Cutter
Merry Grip Flat Nose
Merry Grip Bent Chain Nose
3
4
Length
3.5" (90mm)
4.25" (105mm)
4.25" (105mm)
Item #
4. MG4
5. MG5
5
Description
Merry Grip Chain Nose (105mm)
Merry Grip Round Nose (105mm)
Length
4.25" (105mm)
4.25" (105mm)
economy pliers
“La Femme” Ergo Pliers
Small Tools for Small Hands
This line is available in two different styles; either Boxjoint with gold handles or Lapjoint with purple handles. Especially good for
smaller hands, the “La Femme” line features four 4-1/2" plier types: Chain Nose with Cutter, Round Nose, Flat Nose,
and Side Cutter. Pliers are sold individually or as a 4-piece set which includes all 4 plier types, plus an attractive
zippered carrying case! All pliers and sets are sold in barcoded retail-ready BeadSmith packaging.
1
2
3
4 Semi-flush
Purple Handle Ergo Pliers feature:
• Lapjoint construction
• Nickel-plated for added strength
• Soft grip handles are ergonomically designed for fatigue-less operation
4.5" Purple Handle Lapjoint Ergo Pliers
Item #
1. ER801
2. ER804
3. ER806
Description
Chain Nose with Cutter
Round Nose
Flat Nose
1
2
3
4 Semi-flush
Length
4.5"
4.5"
4.5"
Item #
4. ER841
ER810
Description
4-Pc. Plier Set with Carrying Case
Length
4.5"
4.5"
Gold Handle Ergo Pliers feature:
• Boxjoint construction
• Nickel-plated for added strength
• Soft grip handles are ergonomically designed for fatigue-less operation
4.5" Gold Handle Boxjoint Ergo Pliers
Item #
1. ER701
2. ER704
3. ER706
Description
Chain Nose with Cutter
Round Nose
Flat Nose
Length
4.5"
4.5"
4.5"
Item #
4. ER741
ER710
Description
4-Pc. Plier Set with Carrying Case
Length
4.5"
4.5"
57
economy pliers
s!
New I tem
• Double Leaf Spring
• Stainless Steel Tips
• European Quality
Comfort Series 6" Ergonomic Pliers
1
2
3
4 Semi-flush
Comfortable, Extra-Long
Ergonomic Handles!
Extra Wide Thumb Roll
for Added Leverage!
Item #
1. PLCG01
2. PLCG04
Item #
3. PLCG06
4. PLCG41
PLCG3SET
Description
BeadSmith Ergo 6" Chain Nose Plier
BeadSmith Ergo 6" Round Nose Plier
Description
BeadSmith Ergo 6" Flat Nose Plier
BeadSmith Ergo 6" Semi-flush Side Cutter
Beadsmith Ergo 3 piece Set (Chain, Round & Side Cutter)
5-Piece Color I.D. Economy Plier Set
Color-coded Pliers! Pick up the right tool every time!
Our most economical plier series is also one of our most popular!
4.5" length with PVC grip.
1
2
Cutter
PL4
3
Item #
1. PL4
2. PL1
3. PL8
58
4 Semi-flush
5
Description
Green Round Nose with Spring
Aqua Chain Nose with Spring and Cutter
Blue Bent Chain Nose with Spring
Length
4.5"
4.5"
4.5"
Item #
4. PL41
5. PL6
PLSET
Description
Yellow Side Cutter (semi-flush) with Spring
Red Flat Nose with Spring
5-Piece Set (includes all 5 styles listed above)
Length
4.5"
4.5"
economy pliers
!
Xuron Tools New I tems
Tweezer Chain Nose Plier
Super Fine Round Nose Plier
The ultimate needlenose pliers. Six separate
milling operations on each plier’s nose ensures
the blades match in size, shape and alignment.
These pliers combine the precision to pick up a
human hair with the strength required for wire
forming operations. Cushioned grips and spring
action speed use, enhance control and make the
pliers more comfortable in your hand. PL450
Traditional jeweler’s plier designed for
a non-traditional approach. Innovative
round tip transitions to elliptical shape
along length of blades for maximum
dexterity and forming possibilities.
Exceptional tip strength. Ideal for
forming or looping of very fine wire in
precision work. Cushion grips and
spring action maximize operator
comfort. PL488
Split Ring Plier
Finally, a split ring plier that actually works.
Curved catch tip opens ring then securely
grasps it, simplifying installation. Ergonomic
design, non-slip Xuro-Rubber™ grips and light
weight make it easy to use. Works with all sizes
down to #00. PL496
1
2
Tweezer Chain
Nose Plier
PL450
Double Flush Cut Shear
This shear gives square ended cuts on
both the cut and off-cut sides. It features
comfort enhancing soft rubber grips and
a return spring for ease of use. PL691
3 Split Ring Plier
4 Double Flush
All of these items are made in the USA and sold
individually in retail-ready packages.
Item #
1. PL450
2. PL488
3. PL496
4. PL691
Description
Tweezer Chain Nose Plier-USA Made
Super Fine Round Nose Pliers-USA Made
Split Ring Pliers-USA Made
Dbl. Flush Cut Shear-USA Made
High Tech Series, 5.5"
Designed for precision work, these pliers offer a black comfort
grip and excellent micro tips. A black oxidized finish, springs,
and an amazing price make this plier series exceptional.
1
2
3
PLHT5
4 Semi-flush
Item #
1. PLHT10
2. PLHT14
3. PLHT16
4. PLHT41
5 Split Ring Plier
Description
Chain Nose
Round Nose
Flat Nose
Semi-flush Cutter
6 Economy Memory
Wire Cutter
Length
5.5"
5.5"
5.5"
5"
7 Metal/Leather Hole
Punch
Item #
5. PLHT5
6. PLHT6
7. PLHT7
Description
Split Ring
Memory Wire Cutter
Metal/Leather Hole Punch - hole dia. 1.6mm (1/16")
Length
5.5"
5"
6"
59
economy pliers
Foam Grip Series, 4.5"
Do you find your customers complain of pain and fatigue
from working with pliers? Well, suffer no longer! Our
economy range of special foam handled pliers is the perfect
solution. Lap joint construction. Double leaf spring.
1
3
2
TO11
Item #
1. T010
Description
Chain Nose with Foam Grip
Length
4.5"
Item #
2. T011
3. T009
Description
Flat Nose with Foam Grip
Round Nose with Foam Grip
Length
4.5"
4.5"
Nylon Jaw Pliers, Boxjoint, 4.75"
These ideal wire working tools will not scratch or damage wire or metal findings. They’re superb for
straightening wire! Smaller & more comfortable than comparable tools from other manufacturers, our
Nylon Jaw Pliers are 120mm (4.75") and come with double-leaf springs for stressless work. PVC grip.
1
2
3&4
5
PL568
Item #
1. PL560
2. PL564
3. PL566
Description
Chainnose 2 per bag
Roundnose 2 per bag
Flat Nose 2 per bag
Length
4.75"
4.75"
4.75"
Replacement Jaws
Item #
RJ560 (2/bag)
RJ564 (2/bag)
RJ566 (2/bag)
Item #
4. ER566
5. PL568
PL550
Description
Length
Ergo Double Nylon Jaw Flat Nose
1/2 Round-1/2 Flat
4.75"
Flat Nose (not shown)
5.5"
Tapered Flat Nose Pliers, Boxjoint, 4.75"
The tips of these flat nose pliers have been narrowed to allow greater control when
bending wire. The 1mm, 1.5mm, and 2mm tips are finer the other flat nose options.
Actual Tip Sizes
1, 2 & 3
Angled View
1mm 1.5mm 2mm
Item #
1. PL1610
2. PL1615
3. PL1620
60
Description
1mm Tapered Flat Nose
1.5mm Tapered Flat Nose
2mm Tapered Flat Nose
Length
4.75"
4.75"
4.75"
PL1610
Replacement Jaws
Item #
RJ566 (2/bag)
RJ568 (2/bag)
PL551 (2/bag)
economy pliers
BeadSmith Minis
Additional plier features:
• Polished steel heads
• PVC handles
• Lapjoint construction
• Single-leaf springs
1
mini
Compare the size of
the Mini Chain Nose
plier (PLMN01)
against a 4.5" Round
Nose plier from our
PL500 Series (PL513).
The Mini measures a
petite 3" long! Small
enough to fit in a
pocket or purse!
Portable tools for beaders on-the-go!
This exciting new line features 7 miniature tools:
Chain Nose pliers, Round Nose pliers, Flat Nose
pliers, Side Cutter, Nylon Jaw Chain Nose pliers,
#5 Knotting tweezers and Split Ring tweezers. All
of the tools feature barcoded retail-ready
BeadSmith packaging with hanger-holes.
2
3
5
6
TOOLS
3-Piece Mini Plier Set
Includes:
Includes:
Includes:
• Round Nose Mini
• Chain Nose Mini
• Flat Nose Mini
PL33
• Round Nose Mini
• Chain Nose Mini
• Flat Nose Mini
• Mini Side Cutter
PL334
• All 7 mini-tools
• PLUS a petite purple
leatherette carry case!
PLMN07
PL33
Item #
1. PLMN01
2. PLMN04
3. PLMN06
Item #
4. PLMN41
5. PLMN55
6. PLMNTW
PLMN55JAW
PL33
PL334
PLMN07
PLMNP
Description
Mini Chain Nose, 3"
Mini Round Nose, 3"
Mini Flat Nose, 3"
Super Economy COLOR I.D. Mini Plier Sets
PL334
PLMN07
Description
Mini Semi-flush Side Cutter, 3"
Mini Chain Nose Nylon Jaw, 3.5"
Mini Tweezer Pair: one #5 Knotting tw.(a) & one Split Ring tw. (b)
Mini Chain Nose Nylon Jaw, 3.5"
3-piece Mini Plier Set
4-piece Mini Plier Set
7-piece Mini Plier Set with Pouch
Leatherette Mini Pouch 5-1/8" x 4-1/8" x 1-1/4"
New Items!
Our 3” Color-Coded Mini Pliers Feature…
• Cushion Grip Handles
• Lapjoint Construction
• Spring Action
3-piece Set Includes…
• Round Nose Plier
• Chain Nose Plier
• Semi-flush Side Cutter
PL3MINI
8-piece Set Includes… All 3 Mini Pliers
Listed above PLUS, five additional tools!
• Flat Nose Plier
• Knotting Tweezer
• Nylon Jaw Plier • Thread Cutter
• ScoopEEZ® Bead Scoop
All conveniently stored in a compact black
canvas case! PLMN08
PLMN08
Compact & Portable!
PL3MINI
Item #
PL3MINI
Description
BeadSmith 3 Piece Mini Color I.D. Plier Set
Case measures only 4.25" x 7"
when zipped
Item #
PLMN08
Description
BeadSmith 8 Piece Mini Color I.D. Plier Set
61
beadsmith plier sets
!
New I tem
Deluxe Beader’s
Tool Set
ER650 Ergonomic Series
Deluxe Beader’s
Tool Set with
Ergonomic Pliers
Includes:
• Side Cutter
• Crimping Plier
• Knot Cutter
• Knotting Tweezer
• Split Ring Tweezer
• Nylon Jaw Flat Nose Plier
• Purple Leatherette Pouch
Includes:
• Ergo Chain Nose
• Ergo Round Nose
• Ergo Side Cutter
• Ergo Nylon Jaw Flat Nose
• Crimping Plier
• Ergo Knot Cutter
• Knotting Tweezers
• Split Ring Tweezers
• Leatherette Pouch
PL9SET
ew I tem!
N
ER650 Ergonomic Series
ER9SET
“COLOR I.D.”
Color Coded 4-Pc.
Boxjoint Plier Set
Super-Fine Ergo
4-pc. Plier Set
Includes:
• Round Nose w/white handle
• Chain Nose w/red handle
• Flat Nose w/pink handle
• Side Cutter with
purple handle
Includes:
• Chain Nose
• Round Nose
• Flat Nose
• Side Cutter.
PLIDSET
ER650SET
4-Piece Gold
Boxjoint Ergo
Plier Set
4-Piece Purple
Lapjoint Ergo
Plier Set
Includes:
• Flat Nose Plier
• Side Cutter
Includes:
• Flat Nose Plier
• Side Cutter
ER710
ER810
Super-fine
4-Piece Set
“Purple Plierz”
4-Piece Set
Includes:
• Super-fine Round Nose
• Chain Nose
• Flat Nose
• Side Cutter
• Black Leatherette
Pouch
Includes:
• Super-fine Round Nose
• Chain Nose
• Flat Nose
• Side Cutter
• Matching Purple
Leatherette Pouch
PL650 SET
PL660SET
Economy Ergonomic
5-Piece Plier Set
Includes: 5" Bent Chain Nose, 5" Round Nose, 5" Chain
Nose, 5" Flat Nose, and 5" Side Cutter. Plus a Black Canvas
Carrying Case! ER900
62
Open & Closed
Views
beadsmith plier sets
5-Piece Economy New I tem!
Plier Set
Super Economy Ergonomic
5-Piece Plier Set
Includes:
• 5" Round Nose
• 5" Chain Nose with Cutter
• 5" Flat Nose
• 5" Side Cutter
• 5" Bent Chain Nose
Includes:
• 5" Round Nose
• 5" Chain Nose w/ Cutter
• 5" Flat Nose
• 5" Side Cutter
• 5" Bent Chain Nose
PLSET
ERPLSET
!
New I tem
Comfort Series
6" Ergonomic Plier Set
“COLOR I.D.”
Color Coded 3-Piece
Lapjoint Plier Set
Includes:
• Round Nose
• Chain Nose
• Side Cutter
Includes:
• Round Nose with green handle
• Chain Nose with blue handle
• Side Cutter with yellow handle
PLCG3SET
PL3SET
New I tems!
Color Options Series: Beader’s Tool Set
Tools in your Favorite Vibrant Colors!
Eight
Choose from
Sets!
Different Color
Features 8 fashion-color tools in a color-coordinated clutch… Perfect for the
style-conscious beader! Each set contains the following tools: Chain Nose Plier;
Bent Chain Nose Plier; Flat Nose Plier; Nylon Jaw Flat Nose Plier; Round Nose
Plier; Side Cutter; Knotting Tweezer; Split Ring Tweezer; and a stylish color clutch.
All 6 color-matched pliers feature:
• Double-Leaf Springs for Comfort
• Slip-Resistant Matte Finish Grips
• Boxjoint Construction
Chocolate
PLFAS01
Desert Beige
PLFAS02
Orchid
PLFAS03
Light Blue
PLFAS04
Aqua
PLFAS05
Light Olive
PLFAS06
Olive
PLFAS07
Bubblegum
PLFAS08
63
pliers/tools
PL950
• No sharp edges! No crimp covers!
• Secure, Quick & Easy
• Professional finish for your jewelry
• For use exclusively with 2mm sterling silver or gold-filled tubular
crimps & .014-.015" flex wire and .018-.019" flex wire
We’ve been referring inquiring retail customers to local bead shops
stocking these items, so make sure you have plenty on hand!
PL940
ER950
s!
New I tem
ER940
Item #
ER940
ER950
Description
Ergo Magical Crimping Plier for .014-.015 Flex Wire
Ergo Magical Crimping Plier for .018-.019 Flex Wire
Crimping Pliers
Item #
PLJCRIMP
PLCRIMP
PLMICROCRIMP
Description
Jumbo Crimping Pliers
Crimp Forming Pliers
Micro Crimper
Item #
PLCRIMP2
64
Description
Double Notch Crimper
O ri g i na l
J u m bo
M i cr o
PL J C MP
RI
PL CRI M P
LM
IC R C R I M
O
P
Compatible Crimp Beads
.026-.032" (.66-.81mm), 3mm crimp
.013-.024" (.33-.60mm), 2mm crimp
.010-.013" (.25-.33mm), 1-1.5mm crimp
Double Notch Crimper
“The Problem Solver”
This crimper has two forming cavities
to tighten 2-3mm round, tube or
combination crimps up to 15%
tighter than our original crimp tool
(PLCRIMP). It also features a true
ergonomic handles which give
you a great grip. With a little
practice, you’ll be able to
match the right cavity
with the right crimp
every time.
Description
Magical Crimping Plier for .014-.015 Flex Wire
Magical Crimping Plier for .018-.019 Flex Wire
P
Create perfect crimps every time! Flat nose
pliers only crush crimp beads, leaving sharp
edges, but the “Crimping Plier” actually creates
smooth, rounded crimps every time. A special
two-step process allows the plier to first separate
the crimp into two sections, securing each of
your threads, and then crush the crimp to
ensure the tightest crimp possible. Now
available in 3 different styles to accommodate
different crimp bead sizes. Each plier measures
approximately 5-1/8".
Item #
PL940
PL950
Fold-Over Crimp Plier
Enlarged for Detail
Ideal for leather, suede and ribbon fold-over
crimps. Features a heavy-duty 9mm wide
jaw with two different fold-over notches
to create professional fold-over crimps.
Measures 5.5" (140mm). Creates
wonderfully smooth,
rounded crimps.
Finished
crimp
Item #
PL110
Description
Fold-Over Crimp Plier
1) Put stringing material
into the crimp
2) Place crimp in a notch
on the plier jaw
3) Squeeze until the
crimp closes
Length
5.5"
pliers/tools
Memory Wire Cutter
Hi-Tech Economy Memory
Wire Cutter
Cuts memory wire easily and
efficiently without pitting or
quickly dulling. Measures 5".
Made in the USA.
Item #
PL2193
Cuts memory wire easily and efficiently
without pitting or quickly dulling.
Measures 5". Made in Taiwan.
Description
Memory Wire Cutter
Flex-Wire Cutter
Item #
PLHT6
Flush
Description
5" Hi-Tech Memory Wire Cutter
6" Maxi Sheer
Flush Cutter
Finally a plier suitable to cut
multi-strand flex-wire time
& time again. This cutter
is made of high carbon steel
blades that are precision
ground to ultra sharp cutting
edges. Made in the USA.
Made from the highest grade, high
carbon steel, this wire cutter will flush
cut soft wire up to 1.6mm, 14 gauge.
This tool has more torque than our
PL410 flex-wire cutter.
Item #
PL410
Item #
PL2175
Description
Flex-wire Cutter
Ultra Flush Cutter
with Spring
Flush
Flush
Description
6" Maxi Sheer Flush Cutter
Double Flush
Hard Wire Cutter
Flush
Need more strength in a precision cutter?
This 5" (125mm) flush cutter has
ergonometric handles and a spring for
ease of use. The jaws are induction
hardened to a 58 Rockwell hardness.
Cuts through thicker wire than the
#PL270 (max cut 1.6mm copper wire).
Made in Europe.
This heavy-duty shear features self-adjusting
clamping fixtures which hold the material
being cut perpendicular to the cutter jaws. It
greatly simplifies the cutting process while
adding significantly to both the precision of
the cut and cutting capacity. Gives square
ended cuts on both the cut and off-cut sides.
Cuts wire up to 0.060".
Item #
PL5000
Item #
PL2193F
Description
Ultra Flush Cutter with Spring
Flush Cutter
New Items!
The most durable Micro-Shear® flush cutter.
Features a tough alloyed steel, state-of-the-art
heat treating, high precision screw-and-post
pivot and ultra-precise grinding. Cuts
everything from Mylar® or thread up to 14
AWG soft wire. Advanced ergonomically
designed Xuro-Rubber™ cushion grips, Light
Touch™ return spring and glare eliminating
finish help you work comfortably and
precisely, for longer than is possible with a
conventional cutter.
Item #
PL9200
Flush
Description
Tapered Head Micro-Shear Flush Cutter
Description
Double Flush Hard Wire Cutter
Economy
Flush Cutter
New Items!
This 5" tool is perfect for thin gauge
wire. The cutting blades feature a
Rockwell hardness of 55. Best
of all, the price is unbeatable!
Item #
PL54
Description
5” Economy Flush Cutter
Angled Micro-Shear® Flush Cutter
The PL280 allows easier cutting in difficult areas. An angled
head provides excellent sight lines when used in either the
vertical or horizontal position. A slim profile increases
accessibility to hard to reach surfaces. Light weight, glare
eliminating black finish, and non-slip
Xuro-Rubber™ grips ensure operator comfort. Flush
cuts soft wire up to 20 AWG (0.8mm).
Item #
PL280
Flush
Flush
Angled
View
Description
Angled Micro-Shear® Flush Cutter
65
pliers/tools
s!
Power-Up Series Cutters New I tem
Heavy Duty Semi-flush Cutter
Our 6-1/2" Heavy Duty
Cutter is excellent for thick
gauge wire. It includes a
“safety lock” for when the
plier is not in use.
Item #
PL499
!
New I tem
Description
6-1/2" Heavy Duty Semi-flush Cutter
Side Cutter with Spring
Tungsten Carbide Jaw Inserts
This wire cutter is anything but ordinary!
Unlike a typical wire cutter, it features jaw
inserts with Tungsten Carbide, an extremely
solid compound developed at high
temperatures. This element not only makes
this tool durable for hard-wire cutting, but
will also make it possible to outlast a
standard wire cutter. In addition, the
cushion grip on the handles and the return
springs allow for an easy and comfortable
use. Measures 120mm.
Item #
PL741-TC
s!
New I tem
Armed with
Tungsten Carbide
Jaw Inserts
Description
120mm Side Cutter w/ Springs Tungsten Carbide Jaw Inserts
by Keiba®
Thicker and harder wires are now used much more
often in jewelry-making and other hand-crafts for
more variety of expression. Sometimes, it requires
strenuous work to cut these hard wires with regular
pliers on the market. Keiba® developed their PowerUp series to cut hard materials with much less
gripping power. Power-Up series have a graceful
design, but with double the cutting power. Double
the cutting power means that you can cut thick wires
with half of the gripping power that would be
needed when using standard cutters.
Choose from two styles:
Full-flush Power-Up Cutter (PL266)
and Semi-flush Power-Up Cutting Nipper (PL276).
Both include an attached
loop of ball chain that serves
as a safety-lock to avoid
injury. Made in Japan.
Sold in retail-ready package.
Ball
chain
serves as
safetylock.
Item #
PL266
PL276
Description
Full Flush Heavy Duty Cutter
Semi-flush Heavy Duty Cutter
Wire/Knot Cutter
Ideal tool for
cutting thread.
Made in
the USA.
This 5" (125mm) flush cutter is similar to our best
selling PL170 cutter. This tool has a better hardness
and will efficiently cut metal over a longer time. 58
Rockwell hardness. For use with wire 16 gauge or
less. Max cut 1.3mm copper wire. Made in Europe.
Description
Wire/Knot Cutter
Item #
PL270
Description
Wire/Knot Cutter
Maun Side Cutter
Sprue Cutter with Spring
140mm compound
action cutter offers
unbelievable
cutting ability.
Ideal for sprues
or hard to cut material.
Ideal for
cutting
thread and
soft wire.
Item #
PL299
Item #
T068
Description
Maun Side Cutter
Description
Spruce Cutter with Spring
Thread Clipper
Spring action, sharp, and inexpensive
makes this thread cutter very popular.
Thread Cutter with Cover
Item #
TC100
Item #
TC200
66
Description
Thread Clippers
PL266
Full-flush Cutter
PL276
Semi-flush Cutter
Wire/Knot Cutter
Item #
PL170
PL276
This European quality, professional jeweler’s tool
features a spring action handle. Easily cuts through
a variety of bead
& craft materials,
including yarn
and thin wire.
Description
Thread Cutter with Cover
pliers/tools
Plate Shear 7" Straight Jaw
Made in Germany, these quality shears have long
been a favorite. 7" in length.
Also available with a curved
jaw 318PC
Item #
317PC
Description
Ultra Flush Cutter with Spring
Thread Cutter Pendant
This cute, ingenious device has a camouflaged
circular blade that easily cuts threads. This
device can be worn as a pendant or can be set
atop a reel of thread for instant use. The perfect
thread cutter for travel since it will pass security
inspection at airports.
Antique Silver TCP454
Antique Gold TCP455
Item #
TCP454
TCP455
Description
Ant. Silver Thread Cutter Pendant
Ant. Gold Thread Cutter Pendant
Power Pro
Scissors
An inexpensive scissor
that is very effective at
cutting Power Pro and
other hard-to-cut threads.
Item #
PPSC
Description
Power Pro Scissors
Scissors
Ideal for cutting thread.
Plate Shear, 7"
Curved Jaw
Item #
318PC
Description
Double Flush Hard Wire Cutter
Softgrip® 5" Micro
Scissors
by Fiskars®
Comfort and precision in one little scissor.
Softgrip handles make cutting easy and
relaxed, bringing a new level of comfort to
work. Micro-tip® has an extra-fine point you
can actually see. Now you can make
any meticulous cut down to
the smallest snip.
Item #
SC7097
Description
Softgrip® 5" Micro Scissors by Fiskars®
Laser Scissors
A 4.5" serrated
scissor designed
to cut in tiny
hard to reach
places with
amazing precision.
Item #
S642
Description
Laser Scissors
Chinese
Scissors
These large handled
4" thread sheers offer
excellent control. Very
sharp, with fine points
for precision work.
Item #
JT122
Description
Scissors for Cutting Thread
Item #
SC4
Description
Chinese Scissors
End Cutter, Straight
Jaw, 4.75", Boxjoint
End Cutter, Oblique Jaw,
4.75", Boxjoint
Item #
84PCSD
Item #
94PCSD
Description
End Cutter, Straight Jaw, 4.75", Boxjoint
Description
End Cutter, Oblique Jaw, 4.75", Boxjoint
67
pliers/tools
Combination Round Nose
& Cutter, Boxjoint
Premium Quality Combination
Round Nose & Cutter,
Smooth, Lapjoint
Cutter
Item #
62PC
63PC
Description
Smooth, Combination Round Nose & Cutter, Boxjoint
Serrated, Combination Round Nose & Cutter, Boxjoint
Combination
Round Nose & Cutter,
Serrated, Lapjoint
Our most popular
round nose/cutter
combo (rosary plier)!
This is a great
2-in-1 tool.
Made in Germany.
Item #
58PC
58PCSD
Cutter
Description
Without Spring
With Spring
Length
5.5"
5.5"
Combination Chain
Nose & Cutter,
Smooth, Lapjoint
Cutter
Item #
59PC
59PCSD
Description
Comb. Round Nose, Cutter, Serrated, Lapjoint without Spring
Combination Round Nose,Cutter, Serrated, Lapjoint w/Spring
Cutter
Item #
75PC
76PC
76PCSD
Description
Comb. Chain Nose & Cutter, 5 Serrated
Comb. Chain Nose & Cutter, Smooth, Lapjoint without Spring
Combination Chain Nose & Cutter, Smooth, Lapjoint w/Spring
Combination Round Nose & Cutter, 4.5", Economy Round Nose & Cutter
Our new Chinese made economy
Smooth, Lapjoint
Cutter
Item #
PL50
Description
Comb. Round Nose & Cutter, 4.5" Smooth, Lapjoint
Our extremely popular Economy Rosary plier
is now available with a comfort grip ergonomic
handle. Lapjoint construction, spring action.
Measures 5".
Item #
ER958
Just when you think you have seen
it all... This finely made all purpose
plier can loop, cut, flatten and close
jump rings. Features a PVC cushion
grip, lapjoint construction and
double leaf spring.
Item #
PL4IN1
68
Description
4-in-1 Plier
Description
Economy Round Nose & Cutter (Rosary Plier)
Mini V-making
Cutter
Description
Ergonomic Economy Round Nose & Cutter (Rosary Plier)
The 4-in-1 Plier
Round Nose & Cutter is the first
inexpensive Rosary Plier that
we have found that meets our
rigid product specifications.
This 4-3/4" spring
loaded tool actually
cuts metal!
Item #
PL58
Economy Ergonomic Round
Nose & Cutter (Rosary Plier)
(Rosary Plier)
Perfect for making small
V shapes and bends in
wire. Will leave a
small toolmark
on the wire.
Item #
PL43
Description
Mini V-making
The 4-in-1 Plier with Ergonomic
Comfort Grip
The extremely popular
“4-in-1 Plier” is now
available in a comfort
grip ergonomic handle.
Reduces hand fatigue.
Item #
Description
ERPL4IN1 4-in-1 Plier with Ergonomic Comfort Grip
Cutter
Length
4.75"
pliers/tools
Loop Closing Plier
Ring Holding
Plier
Measures 4-3/4".
Hold Rings in place
while you repair, set
stones, or simply polish.
Item #
PL200
Description
Loop Closing Plier
Item #
PL300
Description
Ring Holding Plier
Split Ring Plier
High Tech Split Ring Plier
Finally an easy way to open Split
Rings. Simply place the bent nose
in the center of the ring and add
pressure. The split ring will
easily slide apart. Available
with or without spring.
Our new “High Tech” family of
pliers is also available in a split ring
opener. Extremely fine nose.
Works well with even the
smallest of split rings.
Item #
PLSR3
PLSR5
Description
With Spring
Without Spring
Length
4.75"
4.75"
Economy Hollow/Round, 5"
Item #
PLHT5
Description
High Tech Split Ring Plier
Length
5.5"
Hollow/Round, 5", Boxjoint
Excellent for making
precise bends and
loops in wire.
Item #
PL32
Item #
320PC
320PCSD
Description
Economy Hollow/Round, 5"
Description
Hollow/Round, 5", Boxjoint without Spring
Hollow/Round, 5", Boxjoint with Spring
Flat/Round, 5", Boxjoint
Half Round/Flat, 5",Boxjoint
Item #
310PC
Item #
300PC
Description
Flat/Round, 5", Boxjoint
3-Step Round/Hollow Pliers New I tem!
Double spring and red handle.
Approx. Measurements
2.3mm]3.7mm]4.8mm]-
Item #
PL34
Description
3-Step Round/Hollow Pliers
Description
Half Round/Flat, 5", Boxjoint
Flat/3-Step Round Nose
Perfect for creating exact
loops over and over again.
Normal round nose
pliers have a tapered nose
which causes looping to be
inconsistent. The specialty
3-Step plier will guarantee
the same size loop
every time. 5".
Item #
PL48
1mm]1.5mm]2mm]-
Description
Flat/3-Step Round Nose
69
pliers/tools
1/2 Round – 1/2 Flat Boxjoint
Ergo 1/2 Round-1/2 Flat
5" Boxjoint
Item #
PL528
Item #
ER928
Description
Economy Flat/Round Nose
New
I tem!
Description
Ergo 1/2 Round/ 1/2 Flat , 5" Boxjoint
Wire Twisting Plier
Bow Opening Plier
Jaws open as you squeeze the
handle. Ideal for use with links,
jump rings and bows.
Clamp down on your craft wire and
secure with a vise on the other side.
Simply pull the end and watch the
wire twist into perfectly uniform
spirals. The more you twist, the
tighter the spirals. Excellent when
working with colored wire. Two sizes.
TP6 - 6" small,
TP8 - 8" large
Item #
PLBW01
Description
Bow Opening Plier
Item #
TP6
TP8
Description
Wire Twisting Plier 6"
Wire Twisting Plier 8"
Bail Making Pliers
Bead Knotting Plier
This tool is perfect for making
bails on pendants large enough
to fit large chains and collars.
There are two different sized
cylinders for creating either
6mm or 8.5mm bails.
This extra-fine, super-light chain nose
plier gives the beader precise control.
Crimp and knot with a single tool.
Box joint construction, polished
steel, single leaf spring, with a
cushion grip. Made in
Pakistan. Approx. 5"
in length with
red handles.
Item #
PL42
Description
Bail Making Plier
Jump Ring
Closing Plier
Our jump ring closing plier is
grooved at the tip to hold jump
rings for soldering or closing.
Item #
PL44
Description
Jump Ring Closing Plier
High Quality Leather
Hole Puncher
Features six revolving punches.
Approx. hole punch diameters
are 2.0, 2.4, 2.75, 3.2, 4.0, and
4.75mm. Tool measures 9".
Made in England.
Item #
LP100
70
Description
High Quality Leather Hole Puncher
Item #
PL500
Description
Bead Knotting Plier
Length
4.75"
Hi-Tech Metal/Leather
Hole Punch
Made of tool tempered steel,
the punch is 1.6mm (1/16").
Ideal for making precision
holes in soft metal up to
24 gauge. The plier action
gives added torque.
Item #
PLHT7
Description
High-Tech Metal/Leather Hole Puncher
tools
Motorized Bead Reamers
Cordless Bead Reamer
• Perfect for Softening Rough Edges of Beads
• Use to Smooth and Enlarge Bead Holes
• Includes 3 Diamond-tips
• Battery-operated
(2 x AA, sold separately)
• 10,000 rpm, 2.4-3V DC
Electric Bead Reamer
• Compact, Lightweight Design
• Perfect for Softening Rough Edges of Beads
• Use to Smooth and Enlarge Bead Holes
• Includes 3 Diamond-tips
• Variable Speed Control,
1,000-18,000 rpm, 24V DC
BR801
BR213
!
New I tem
WBRH01
Item #
BR801
BR213
Description
Cordless Bead Reamer 32.4-V, 10,000 rpm, battery-operated
Electric Bead Reamer 24V, 1,000-18,000 rpm
Item #
WBRH01
Diamond-Tip Bead Reamer Set
Description
Wooden Bead/Ring Holder
Our Diamond-Tip
Bead Reamer is ideal for
enlarging bead holes and
softening rough edges.
• Professional jeweler’s tool
• Includes 3 diamond-points stored inside the handle
• Enlarges bead holes
• Softens rough edges
• Hollow aluminum handle allows convenient
storage of tips
• Brass chuck
!
New I tem
Here’s how it works:
1) Loosen collet, insert the base of a point into the
chuck & re-tighten
2) Wet the point with water and turn it side to side
until the hole is smooth or enlarged to desired size
Chuck
45˚ Edging Point
Sm. Reaming Point
Tips are
stored
inside
handle
Lg. Reaming Point
Item #
BR600
Collet
Description
Diamond-Tip Bead Reamer Set
Deluxe Diamond Coated
Bead Reamer Set
Economy Bead Reamer Set
Includes: three tips-small and large reaming points
plus a 45˚ edge reamer; hollow handle for
storing diamond points; easy release chuck
fits into the aluminum housing so that it
releases instantly when the collet is
unscrewed; anodized aluminum
handle, brass rust resistant
chuck; versatile, easy to
use, and trouble free.
Item #
BR500
BR510
BR520
BR530
Description
Diamond Coated Bead Reamer Set
Small Diamond Replacement
Diamond Bur 45 Degree Edging
Large Diamond Replacement
A diamond tipped bead reamer is the perfect
tool to soften rough edges on beads, and to
smooth and enlarge bead holes.
Four piece set.
Length
3mm x 140mm
2mm x 100mm
2mm x 100mm
Item #
BR4
Description
BeadSmith Economy 4 piece Bead Reamer Set
71
tools
14-Piece Craft Drill Set
4-pc. Diamond
Reamer Set
These diamond-tipped reamers are
intended for use on glass, ceramic or
stone beads. Perfect for softening rough
bead edges as well as smoothing &
enlarging bead holes. Features include:
• Sturdy Wood Handle
• 4 Interchangeable Diamond Grit Tips
• Storage Tube for Bits
As with any reamers,
be sure to apply only
slow, gentle pressure
to avoid breaking or
chipping your beads.
Item #
BR5
Description
4 piece Miniature Drill Set
Spiral Hand Drill
Use for fine work. This spring-loaded drill is 4.25"
long and will accept #69 through #80 bits.
Weight: 25gms/pc
New Item!
Item #
DRILL01
Description
Minature Brass Drilling Tool
Precise Push Drill
by Fiskars®
Now you can drill small or delicate objects with
Just the push of a finger! Simply push & the drill spins
automatically.
• Cordless and lightweight
• Ideal for small and delicate items like beads,
light woods, or any surface that you need a tiny hole
• Works with a wide range of drill bit sizes*
The perfect tool for resizing holes. Hand drill
thin metals, plastics, ceramics, wood & much
more. Makes hole sizes .023-.064. Includes
12 piece drill set (sized 52-74), pin vise
& magnetic cap.
Item #
BDRILL
Description
14-piece Craft Drill Set
Needle File Set and
Miniature Needle File Set
These 12 piece economy needle file sets
are ideal for filing rough metal surfaces.
Made in China.
Item #
NF731
NF738
Description
12-pc Needle File Set
12-pc Mini Needle File Set
Length
3mm x 140mm
2mm x 100mm
!
New I tem
10-piece Ergo File Set
Our needle files work wonderfully for a variety
of jewelry making applications. They can be
used to file rough edges on metal beads and
findings, or even to shape and detail polymer
clay and PMC before and after firing. Their
small size also makes them ideal for getting
into confined spaces. The files are made of
high grade steel and are set in comfortable
2" x .5" handles. Total tool length is approx. 6"
Item #
NF740
Description
10-pc Ergo File Set
Set Includes these shapes:
• 2 Round
• 1 Half Round
• 2 Triangle • 1 Square
• 1 Knife
• 1 Oval
• 2 Flat (1 blunt/1 tapered)
6-piece Cutting Broach Set
Plastic handled broaches, packaged in a plastic wallet.
Weight: 90gms/set. Sizes: .8 - 2.3mm. Made in India.
*Bits not included
Item #
DR8920
Description
Precise Push Drill by Fiskars®
Craft Hand Drill with 4 Bits
by Fiskars
Drill through 50 sheets of paper! Comfortable
design for everyday use. Enclosed gears ensure
smooth operation for maximum
drilling pressure.
To insert drill bit:
1. Hold crank in place
2. Twist drill chuck counter-clockwise to open
3. Insert bit
4. Twist drill chuck clockwise to
tighten and secure bit.
®
Item #
DR8516
72
Description
Craft Hand Drill with 4 bits by Fiskars®
Item #
CUT1
Description
6-piece Cutting Broach Set
5" Beading Awls
Ideal tool for knotting between beads.
AWL1
AWL2
P42
Item #
AWL1
AWL2
P42
Description
Metal Awl
Metal Awl with wooden handle
Metal Awl with PVC grip
Length
5"
5"
5"
tools
Tri-Cord Knotter
Learn to make perfect knots!
SP112
SP112
Tri-Cord Tin Cup Knotter
Take the guesswork out of Tin Cup necklaces! The new Tricord tin cup knotter allows you to space beads perfectly and
create professional knots every time. An adjustable slide allows
you to use any spacing that you desire. SP120
Tri-Cord DVD
Tri-cord Knotter Instructional 30 Min. DVD. DVD112
SP120
Tri-Cord Kit
Kit includes: Tri-cord Knotter; instructional video; chain nose
plier with cutter; gold & silver bead caps; French wire;
needles; thread cutter; and size E nylon thread. SK112
Item #
SP112
SP120
Description
Tri-Cord Knotter
Tri-Cord Tin Cup Knotter
BeadSmith Knotting Tool
• Creates secure, uniform knots
• Useful for stringing pearls and
other types of beads
• Retail-ready blister packaging
Item #
EZKNOT
SK112
Item #
SK112
DVD112
Description
Tri-Cord Knotting Kit
Tri-Cord Knotting DVD
New Item!
• Includes illustrated step-by-step
instructions (shown below)
Description
BeadSmith Knotting Tool
73
tools
4-Piece Pin Vise Set New I tem! Nickeled Pin Vise
Ideal for holding small tools,
with Wood Handle
rods and wires. Sizes range
from 0" to 3/16" (0-4.75mm).
& an Extra Collet
Pin Vise
Holds pins in place
for precision work.
Made of hardened steel w/black
finish. Made in India.
Weight: 150gms/set.
Item #
J80
Description
Pin Vise
Pin Vises
Item #
PVS01
(Graver Chuck)
Weight: 40gms/pc.
Made in India.
Description
4-Piece Pin Vise Set
s!
New I tem
!
New I tem
Item # Description
PINT01 Pin Vise- Nickled w/handle & Extra Collet
Third Hand with
Alligator Clips
Nickeled Pin Vise with 2 reversible collets. Opens 0-3mm, ideal for
holding twist drills, craft blades or tubing for filing. Made in India.
PINT02
Keep your hands free!
Ball joints let you angle
at any position.
Nickeled Pin Vise with 2 collets (American Pattern)
Made in India.
Item #
3HAND01
PINT03
tem!
New I
Description
Third Hand with Alligator Clips
Third Hand Round
Base with Tweezer
Features self-locking tweezers,
mounted on a round
base. Ball joints let
you adjust to any
desired angle.
Nickeled Pin Vise with Sliding Collar. Ideal for
wire wrapping. 0" to 1/32" (.8-8mm) 4.25" long.
Made in India.
PINT04
Single-end, four-jaw swivel Nickeled Pin Vise
with 2 reversible collets. Made in India.
Item #
3HAND02
PINT06
tem!
New I
Description
Third Hand-Round Base with Tweezer
Mini Bench Clamp
Attaches to any table converting
it into an instant work station.
Pin Vise with oxidized finish, single collet
Excellent value! Made in India.
PINT07
Item #
PINT02
PINT03
PINT04
PINT06
PINT07
Description
Pin Vise Nickled with 2 reversible collets
Pin Vise Nickled with 2 collets (American style)
Pin Vise Nickled Sliding
Pin Vise Nickled Swivel Type (2 reversible collets)
Pin Vise Oxidized with Single Collet
Mini Spring Clamps
These 2" mini spring clamps will
hold your work when clamping
is necessary. Tips are rubber
coated to protect surface.
Bag of 12.
Item #
CL02
74
Description
Mini Spring Clamps
Item #
BC103
Description
Mini Bench Clamp
Hemostat
Clamp
Bench Pin with
Metal Holder
Clamps small components
with its serrated jaw.
Made to eaily screw to the edge of
any workbench. The
screw will lock securly
in place. Measures 4".
Made in India.
Item #
HC26
HC25
Description
Serrated
Smooth
Length
5"
5"
Item #
BPW8
!
New I tem
Description
Bench Pin with Metal Holder
tools
Wooden Bench Pins New Items!
Use these wooden bench pins as supports for filing, sawing and setting. They fit easily into a slot on your workbench. Made in India.
BPW1
BPW2
Item #
BPW1
BPW2
BPW5
Description
Wooden Bench Pin, dbl. cut 5.25 x 2.25"
Wooden Bench Pin, dbl. cut 6.25 x 2.5"
Item #
BPW5
Description
Wooden Bench Pin, 7 x 2.5"
Bench Filing Block
m!
with Rubber Pad New I te
Bench Pin and
Combination Anvil
Bench Pin with V-Slot
Clamp
Rubber block with an iron frame and raised
steel anvil will provide a 3.25" addition to
your workbench while
filing. Screws
into workbench.
Made in India.
Clamp to surfaces
up to 2" thick.
Made in India.
For benches
up to 1.75"
thick. Weight:
200gms/pc.
Made in India.
Item #
BPW3
Item #
BPW4
Item #
BPW6
!
New I tem
Description
Bench Filing Block with Rubber Pad
Description
Bench Pin and Anvil Combination
Description
Bench Pin with V-Slot Clamp
Wooden Ring Wooden Inside European Ring
Wood Ring
Clamp w/ Parallel Clamp with
Vice with
Ring Clamp
Expands as the brass nut Leather Lined Jaw Leather Lined Jaw
Fly Nut
is turned to grasp ring
from the inside. Length
5-3/4". Made in India.
6" in length.
Made in India.
WDRN01
Item #
WDRN01
WDRN02
WDRN03
The jaws stay parallel. 6"
in length. Made in India.
WDRN02
WDRN03
Description
Wooden Ring Vise with Fly Nut
Wooden Ring Vise with Brass Nut
European Style Ring Clamp with Parallel Jaws
Included wedge can be used
either at the rounded or at the
squared end. 6" in length
Made in India.
RNCL01
Item #
RNCL01
RNCL02
!
New I tem
Nylon Ring
Clamp with
Leather Jaw
Long-lasting. Includes
wedge. 6" in length.
Made in India.
RNCL02
Description
Ring Clamp Wooden with Wedge
Ring Clamp Nylon with Wedge
Chain Sta New I tem!
Introducing Chain Sta, a new
stabilization solution that will
enable you to determine the
finished length of your bracelet
along with the attached clasp!
Chain Sta will allow you to
securely clip or hang the chain
of your bracelet while you fill it
with beads, charms and spacers.
Enlarged View
of the Clamp
and Hanger
Item #
CSTA
Description
Chain Sta
75
tools
BeadSmith ScoopEEZ®
The perfect tool for scooping and guiding small beads into
storage containers! This simple tool is ideal for use with seed beads.
For optimum results, use with a BeadSmith® bead mat as shown
below. Sold in an individual barcoded retail-ready blister pack.
®
Scoops
beads with
ease!
STEP 1
STEP 2
Sweep the long edge of the
Scoop-EEZ along your bead mat
until it fills with beads, then tilt
and lift to scoop.
Slip the pointed end of the
Scoop-EEZ into a container and
pour in the beads!
Item #
SCP1
Description
One 16 x 152mm bead scoop in retail-ready package
Pearl/Bead Shovels
Bead Scoops
Available either with or without a handle.
Tiny bead scoops in 3 different sizes.
Extra Large Plastic
Bead Scoop
Our 6" scoop is perfect for
large beads that can’t be used
with a smaller triangle tray.
Weight: 20gms.
Made in India.
BSH5H
BSH5
Item #
BSH5H
BSH5
Description
Pearl/Bead Shovel with Handle
Pearl/Bead Shovel without Handle
Jewel Setter™
At last a fumble-free way to pick up and position
beads and flat-back jewels! This wonderfully handy
tool is truly perfect for use with beads, especially if
you’re creating inlay bead projects. Among other
things, it’s also great for positioning beads,
flat-backs and stickers on scrapbook pages.
Measures approximately 5" long.
1) Press the tacky end of a Jewel Setter™ on
the top side of the bead or jewel to pick it up.
2) If needed, apply adhesive to the bottom of the
bead or on the place where it is to be set.
3) Set the bead in place and use the pointed
end of the other positioner for
any slight adjustments needed
for exact positioning.
Item #
PC15
76
Description
Jewel Setter
SCP55
SCP85
SCP110
Item #
SCP110
SCP85
SCP55
Description
Large: 11cm x 4cm x 2cm
Medium: 8.5cm x 3cm x 1.5cm
Small: 5.5cm x 2cm x 1cm
New I tem!
Item #
SCP2
Description
Plastic Bead Scoop Extra Large
“Hold-On” for
Bead Stringing
Hold-On holds string ends while you
work and prevents beads from slipping
off. From Soft Flex™ to silk, Hold-On
works on all stringing materials.
Hold-On is a must-have tool for
beading; it replaces tape which leaves a
sticky residue, is more secure than
clips, removable, reusable, ready to use
and non-toxic. The back label shows
the three quick steps to using Hold-On.
Remove it by simply pulling it off the string
end. With Hold-On you can try on your work
before crimping on your findings; just push the
string ends secured with Hold-On together and
make adjustments before it’s too late!
Item #
H395
Description
20gm pkg. of neutral “Hold-On”
tools
Bead Stopper
Now Available in Two Sizes!
We know how frustrating it can be when all the beads you’ve just strung
accidentally slip off the thread. This simple and handy little device clips
to the end of your thread to keep beads in place while you’re working.
No more spilled beads to clean up, or starting from scratch! The easy-touse Bead Stopper is ideal for fine threads. Made from stainless steel to
prevent rust. The new Mini Bead Stopper is perfect for stringing seed
beads and small projects
and is sold in packages
of 8. The original Bead
Stopper is available in
packages of 6 or 16. All
are in retail-ready blister packs.
New I tem!
Work Saver
Use this inexpensive tool to help “Save Your Work”. Simply clip the Work
Saver to the end of a bead strand to stop your beads from slipping off the
string. Sold by the bag of 20.
Item #
AC30
Description
Beadsmith Work Saver - Bag of 20
Beads sold separately
Thread Zap
The ideal tool to seal thread ends by burning. The heating element at the
end of the wand heats to 1200 degrees instantly at the push of a button.
The fine tip easily gets to hard to reach thread. Includes AA battery.
Beads sold separately
!
New I tem
TZ1200
Shown in
Actual Sizes!
Mini Bead Stopper
Item #
BSMINI08
BS06
BS16
Original Bead Stopper
Description
Mini Bead Stopper, package of 8
Original Bead Stopper, package of 6
Original Bead Stopper, package of 16
Jump Ring Opener
This clever device will make opening and closing jump rings simple.
Just slide the fully adjustable ring over your index finger and insert
the jump ring into the
screw-like head. Give a
slight twist and the jump
ring will open. Twist in the
other direction and the
jump ring will close.
Minimum order
of 10 pieces.
Beadsmith Thread Zap Replacement Tips
We have replacement tips available for the
ideal tool to seal thread ends by burning. The
heating element at the end of the wand heats
at the press of a button! The fine tip easily gets
to hard to reach thread. Sold by the pair.
Item #
TZ1200
TZTIP
TZTIP
Description
Thread Zap thread burner
Thread Zap replacement tips, box of 2
Jump Ring Opener
Open and close jump rings with
ease! Simply slip the Jump Ring
Opener onto your finger for a
quick and easy way to work with
your jump rings!
Here’s how it works:
1. Place the jump ring opener on one
hand & grasp the side of your jump
ring with a flat or chain nose plier.
2. Slip the bottom of the jump
ring into the slot which
offers the best fit.
3. Gently twist the jump
ring sideways with the
pliers to open it. Attach
the jump ring where
needed, then twist it shut.
Item #
JRR1
Description
Jump Ring Opener (min. order of 10)
Item #
JRR2
Description
Jump Ring Opener (min. order of 6)
77
tools
BeadSmith 5-Step Mandrels New I tem!
Beaders & wire artists alike will love this tool for its ability to
create consistently sized loops, circles & coils in wire. Made
from stainless steel with a PVC
grip, the smooth surface
will not mar wire.
Available in two
different sizes which are
packaged both individually
and as a two-piece set. Each tool
offers five diameters.
Small mandrel measurements:
1.5, 2.5, 3.5, 4.5, & 5mm
Large mandrel measurements:
6, 7, 8, 9, & 10mm
Item #
P48A
P48B
P48SET
Made of
hardened and
tempered
steel. Weight:
160 gms/set.
Made in India.
P48SET
Close-Up
RS18
Item #
RS18
RS19
Hardwood
Bangle
Mandrel
15 x 2.5".
Weight:
1000 gms/set
Made in India.
New
I tem!
Superior Steel without markings.
Weight: 700gms/pc.
Made in India. RS18
Gauge Ring Mandrel, ungrooved,
Marked with U.S. Standard Ring Sizes 1-15
Weight: 900gms/pc.
Made in India. RS19
Description
5 Step Mandrel 1.5-5mm
5 Step Mandrel 6-10mm
5 Step Mandrel Set
Oval Bezel
Mandrel
New
I tem!
Bracelet
Mandrel
14" round
(hollow).
Polished cast
steel. Weight:
3000 gms/pc.
Made in India.
Close-Up
RS19
MANB03
Description
Bezel Mandrel Oval
Hard Wood Bangle Mandrel
Mandrel Bracelet
The Right AngleTM Wire Mandrel New I tem!
by Fiskars®
Make 4 Shapes in 23 sizes with just one tool!
Now the possibilities are endless! Craft beautiful
wire objects, such as home accent pieces, lovely
jewelry and ornaments, or just about
anything you can imagine!
Item #
MAN1000
Jewelry
Projects
Home Accent
Pieces
Description
The Right Angle™ Wire Mandrel by Fiskars®
Plastic & Wooden
Wooden Ring
Ring Sticks
New I tems! Mandrel
Made in India.
Unmarked, great
for wire wrapping.
6" in length.
Made in India.
Finger Sizer
2 Styles to choose from!
Perfect fit everytime!
Full & Half Sizes on a Chain
Great for wire
wrapping!
New I tem!
New
I tem!
Close-Up
RS17
Full & Half Sizes
on a Loop
RS17
RS14
Item #
RS14
RS16
78
RS19
New
I tem!
MANB02
Item #
MANB01
MANB02
MANB03
RS18
Description
Ring Mandrel, Superior Steel without Marking
Ring Mandrel, Ungrooved US Standard 1-15
Scrapbooking
MANB01
New I tems!
Ring Mandrels
RS15
RS16
Description
Finger Size Half Round US Standard 1-15
Ring Finger Sizes
Item #
RS15
RS17
WDRN04
Description
Plastic Ring Stick
Wooden Ring Stick
Wooden Mandrel for Rings 6
WDRN04
tools
EZ Bracelet™ & EZ Necklace™ Jewelry Sizers
EZ Bracelet™ Bracelet Sizers
The EZ Bracelet bracelet sizer is a must for every beader. With the EZ Bracelet, you’ll make bracelets that fit the first
time, every time! No more re-stringing because the bracelet’s the wrong size. No more wasted beading wire and crimps!
No more wasted time! No more repeated fittings! The EZ Bracelet is lightweight, (only 2 oz.) and only 12"/31cm tall.
So it’s easy to take with you everywhere! It’s made of heavy roller polished vinyl for years of beading fun. It’s easy to
assemble too! And, because it is shipped unassembled (i.e. flat), it’s cheap to mail to friends as a gift! Available marked
with either inch measurements (EZB1) or centimeters (EZB2).
Inches
EZ Bracelet™ Bracelet Sizer - Mini Edition
Just like the original EZ Bracelet™… only petite and portable!
Measurements are in inches and range from 5 to 8-3/4". EZB3
Metric
EZ Necklace™ Necklace Sizer
Works just like the EZ Bracelet, with measurements from 11" to 27"
for sizing necklaces. EZK1
Packaging on all “EZ” items include thorough instructions.
Item #
EZB2
EZB1
EZB3
EZK1
Description
EZ Bracelet-metric measure
EZ Bracelet-inch measure
EZ Bracelet Mini - travel size
EZ Necklace-inch measure
EZB1
EZK1
Necklace sizer
EZ Earring and EZ Eyes
With these clever tools and 20 gauge wire you can create
multiple styles of ear wire, wire loops, and even eyepins.
They work well with Artistic Wire, Niobium, Gold-filled,
Sterling Silver, half-hard or softer wires.You can even
customize the length of the shanks. Making ear wires has
never been so quick and “EZ”! All of the EZ Tools are sold
in retail-ready packages and include instructions.
EZB3
EZB2
Mini bracelet sizers
Bracelet sizers
w I tem!
EZ Earring 2 Ne
I tem!
EZ Eyes New
French Hoop Ear Wire Tool
Tool for Making Wire Loops and Eyes
EZ Earring
Fish Hook Ear Wire Tool
Actual
size of a
finished
eye pin
Actual size
of a finished
french hoop
Actual size
of a finished
ear wire
Item #
EZEARRING
Description
EZ Earring wire bender
Item #
EZEAR2
Description
EZ Earring 2 wire bender
Item #
EZEYES
Description
EZ Eyes eye pin maker
Easy Ear Wire™
Are you spending too much on earwires, buying large quantities for
economy, just to have them sit on a shelf for weeks or even years? Easy
Ear Wire™ will save you money. With this hand-operated machine you
can make your own ear wires for less than half the usual cost. All you pay
for is the wire you use. Easy-to-use and fully automatic, the Easy Ear
Wire™ maker was invented to make your ear wires easily and quickly.
Just put in a straight piece of wire and in seconds you will have an
elegant ear wire ready for use. It’s so easy and quick you will not need to
keep an inventory of ear wires for you earrings. Simply make them as
you need them. Your customers will appreciate that even your ear wires
are now handmade by you. Comes with complete instructions.
Item #
EEW1
Description
EZ Earring Wire Bender
79
tools
6" Metal Ruler Set New I tem!
80mm Brass Gauge
Deluxe Brass Gauge
80mm brass gauge slide. Measures both inches and millimeters.
Made in Germany. 370
Economy Brass Gauge
80mm brass gauge slide. Measures both inches and millimeters.
Made in India. 390
Includes two 6"
flexible rulers.
Measures in inches
and centimeters.
Item #
J60
Description
Metal Ruler Set
12"/30cm Clear Ruler w/Bead Diagrams
370
The crystal clear acrylic allows you see right through for measuring beads,
string, and more! There are very helpful diagrams which show round bead
sizes from 2-20mm. Also printed on the ruler are the approximate
number of beads per inch for beads sized 2-10mm.
!
New I tem
390
Item #
RULER1
Item #
370
390
Description
80mm Brass Gauge Deluxe, Made in Germany
80mm Brass Gauge Economy, Made in India
Plastic Caliper
Compact and lightweight design.
Perfect for travel Measures items
up to 3.25"/80mm
!
New I tem
• Ideal for beads
• Measure by inches & millimeters
at the same time
Item #
PC80
Description
Plastic Caliper Box of 10
Jewelry Wand
Clasp Fastener
®
Don’t struggle with your jewelry - get it on
with the Wand! Not just a fastener, it’s a
clasp opener! It pushes clasp levers back,
then holds them so they can’t slip away.
Relieves the frustration of operating lobster
claw and spring ring clasps. Works on
bracelets, necklaces, watches, toggles,
foldovers, slide inserts, etc. Packaging
includes complete instructions for use with
different clasps. It’s like having an extra
helping hand! Sold individually.
Item #
JWAND
80
Description
Jewelry Wand Clasp Fastener
Description
12"/30cm Clear Ruler with Bead Diagrams
12" Ultimate
Folding Ruler
Fold it…
Each link in this cleverly designed
ruler measures one inch. Made of
durable plastic, it can be laid flat,
wrapped around an object, or folded
into a cube for compact portability!
When completely folded together, it
measures only 1.5" x 1.5" x 1". Measurements are
given in both inches & centimeters. Assorted colors.
Flex it…
Flatten it!
Item #
FR100
Description
12" Ultimate Folding Ruler - Assorted Colors
Clip-n-Zip® 3-in-1 Fastening Device
The Clip-n-Zip® eliminates the frustration of needing an extra hand to
help you fasten a bracelet or zip up a back zipper. An alligator clip at the
end holds the bracelet’s catch while you close the clasp with your other
hand. For zippers, there’s a 15" long chain
which is stored inside the
wand–simply unscrew
the top to pull it out,
then attach the clip to
your dress’s back zipper
and pull it up yourself!
The third feature is a
button hook, which is
revealed by unscrewing
the alligator clip. The
wand casing is made of
gold-tone plastic and
measures 7" long.
Item #
CNZ200
Description
12" Ultimate Folding Ruler - Assorted Colors
tools
Tweezers
TW5
Item #
TW5
TW10
TW380
TWAA
TWAA
TWSR5
Description
#5 Knotting Tweezer 5"
#10 Knotting Tweezer with Bent Nose 6"
Diamond Tweezer 6"
AA Tweezer 5"
TWMM
TWP20
Item #
TWMM
TWP20
TWSH
TWSR5
TW380
TW10
Description
MM Tweezer 5"
Pearl Tweezer with Pick-up Cups 5.5"
Tweezer with Shovel 7"
Split Ring Tweezer 5"
Ball Pein Jeweler’s Hammer
Plastic-Rubber Jeweler’s Hammer
Our new 9-1/2" Ball Pein Jeweler’s Hammer is an
essential tool for jewelry-makers. With its solid steel
head, it is excellent for
flattening and shaping
many types of hard or
half-hard wires. You will
find this tool very
comfortable to use
because it is geared with a
long yet light wooden
handle, measuring 8-3/4"
in length that feels
balanced to the weight of its head.
This lightweight 9-1/2" Plastic-Rubber
Jeweler’s Hammer features
two different
heads, one is a hard yellow
plastic and the other is soft
black rubber. The plastic
head helps avoid the type
of marring that a steel
hammer might cause. The
rubber head is helpful for
much more delicate work.
Item #
HAM01
Description
Ball Pein Hammer
Item #
HAM02
Description
Plastic-Rubber Hammer
Chasing Hammer
Miniature Ball Pein Hammer
The large base of this hammer is ideal for flattening.
The peen side is used for metal design.
Used for flattening, removing
dents and shaping. 2 oz head.
Weight: 110gms/pc.
Made in India.
Item #
CH223
Description
Chasing Hammer
Item #
HAM03
TWSH
New I tem!
Description
Hammer Ball Peen type miniature 2 oz.
81
tools
Hammer with Replaceable
Brass and Nylon Heads
Nylon Hammer with
Wooden Handle
Allows you to change the heads to any combination desired.
They can also be changed when they get worn out.
9.25" long with 1/2" diameter heads.
Made in India.
Faces can easily be removed with a half turn.
Head diameter is 1.125" (27mm)
Weight: 230gms/set.
Made in India.
New I tem!
Item #
HAM04
Description
Hammer with Replaceable Brass and Fiber Head
Brass Hammer
with Wooden Handle
New I tem!
Item #
HAM05
Description
Nylon Hammer with Wooden Handle and 1 Face
Wooden Mallet
Excellent for removing dents and flattening
of metals. Head size is 3.75" long and 1.875"
in diameter. Weight: 275gms/pc.
Made in India.
Head measures 2" x 1.25". One flat face & one
round face. 9" long. Weight: 100gms/set.
Made in India.
New I tem!
Item #
HAM06
Description
Brass Hammer with Wooden Handle
New I tem!
Item #
HAM07
Description
Wooden Mallet
Rawhide Mallet
Dual Head Mini Mallet
Used for metal work to avoid
scratching or scaring metal.
European quality.
A versatile new tool with detachable ends.
Plastic/metal face.
Item #
HA401
Description
Rawhide Mallet
Item #
JH105
7-Pc. Wax Carver and Spatula Set
Includes 5 of the most common tools. Great for PMC!
Weight: 275gms/set. Made in India.
New I tem!
Description
Dual Mini Mallet
Watch Face Opener
with Riveted Wooden
Handle
Weight: 20gms/pc.
Made in India.
New I tem!
Item #
CRV01
82
Description
7 piece Wax Carver
Item #
WF-KNIFE
Description
Watch Face Opener with wooden handle
tools
Universal Work Holder
Aluminum with wooden handle.
Weight: 220gms/pc
Item #
UNIV01
New I tem!
Description
Universal Work Holder
7-Piece Screwdriver Set
with Spare Blades
Very useful for cutting straight edges.
Weight: 430gms/pc.
Item #
TUBC01
New I tem!
These screwdrivers feature anodized
color-coded hex heads and revisible
blades. Packaged in a plastic pouch.
New I tem!
Tube Cutter
Description
Tube Cutter
9-Piece Screwdriver Set
with Aluminum Stand
Aluminum base holder includes a storage
compartment for extra blades. Blade
sizes range from .60 to 2mm.
New I tem!
Item #
SCRW07
Description
7 piece screwdriver set with spare blades
Screw Plate with
14 Taps/Dies
Hole Size: 0.7mm to 2mm.
Weight: 30gms/set.
New I tem!
Item #
SCRW09
Description
9 piece screwdriver set with holder
Scratch Brush
Fiberglass Bristle with Metal Ferrule
Hole Size: 0.7mm, to 2mm.
Weight: 10gms/set.
BRUSH02
New I tems!
Enlarged View
Replacement refill
REP01
Item #
SCRP01
Description
Screw Plate with 14 Taps/Dies
Hard Bristle Brush
Polishes and removes rust and dirt from metal surfaces.
Hard nylon bristles are mounted in a clear plastic handle.
Weight: 55gms/pc. Made in India.
Item #
BRUSH01
Item #
BRUSH02
REP01
BRUSH02
Description
Scratch Brush with Fibre Glass Bristle and Metal Ferrule
Replacement Refills for #BRUSH02
New I tem!
Description
Plastic Handle Brush with Hard Nylon Bristles
83
tools
BeJeweler Pro Hot Fix Tool
Graceful and stylish, the New Generation BeJeweler Pro electric
rhinestone applicator has true ergonomic styling!
This professional model features:
• A design patented soft handle that maximizes productivity
while preventing operator fatigue and discomfort
• A short nozzle to allow the ultimate precision placement
• Universal voltage for use with either 110 or 220 volts
• Professional, sleek packaging with instructions
• Rhinestone tips in 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm,
7mm sizes that are etched for easy size identification
• Hot Spot (flat) tip for applying all other size / shape hot-fix
embellishments
• Deep support stand holds tool firmly
• Includes an insert with detailed directions and pattern,
plus a free matching blue cleaning brush!
• Flared tip on handle helps prevent fingers from touching heated metal
Beyond question, the best hot-fix rhinestone tool ever designed!
Rhinestone & Stud Setter
Sets stones & pearls 5mm, 7mm, 8mm and nail heads 5mm, 6.5mm,
9mm. Includes: setter machine, 4 different plunger sizes, adjustable
setting plate, 12 patterns, fashion & instruction booklet.
New I tem!
Bonus Clea ning Brush!
Item #
BJPRO
Description
BeJeweler Pro Hot Fix Tool
Acculab Digital Scales
Ideal for counting parts
& weighing components
All three models are made in
the USA and feature a flip-down
protective cover, integrated
cal-weights, a stainless steel
pan and back-lit display.
Other features include:
• Protective flip-down and removable
cover allows stackability & shipping
protection
• 14 Mass unit conversions (grams,
oz., lbs, lbs:oz, carats, and more)
• Runs with 9 volt Battery or included
AC adapter
• External one button calibration with
3 weight options (Two 100g weights included.)
d
• Lock down capability
e drop-shippe
These items ar ufacturer
an
• Two year manufacturer warranty
m
from the
Item #
BEDAZZLER
Description
Rhinestone and Stud Setter
Two-hole Metal/Leather Punch
Features two different hole sizes, 1.6mm (1/16") and 2.3mm (3/32").
Made of tool steel, each punch is tempered for making precision holes in
soft metal up to 24 gauge! Screw action makes holes without
deforming metal. Can also be used for leather, plastic and
other materials. A perfect hole every time!
Item #
LPUNCH1
84
Description
Two-hole Metal/Leather Punch
Item #
VIC-212
VIC-412
VIC-612
Capacity
210g/7.4oz
410g/14.4oz
610g/21.5oz
Readability
.01g
.01g
.01g
Pan Size
3.8" diameter
5.6" x 5.1"
5.6" x 5.1"
Bead Counting Set
Counts by the gross (144) in increments of 12, and by the hundred (100)
in increments of10. The ideal device to count round beads size 2-7mm.
An adjustable sliding cover controls how many rows of holes are exposed.
Save time and get an exact count every time!
Item #
BC10
Description
3-piece Bead Counting Set
tools
Wood Doming Block
with Two Punches
Stainless Steel Doming Block
High quality steel with tempered finish.
Measures: 2.5 x 2.5".
Weight: 1500gms/pc.
Made in India.
One doming block
with depression
on 6 sides and two
wood punches.
Weight: 210gms/set.
Made in India.
Alternate
Views
New I tem!
New I tem!
Item #
BLCK01
Description
Stainless Steel Doming Block, 2.5" x 2.5
Item #
DMW01
Description
Wood Doming Block and 2 Punches
High-Quality 24-Piece Doming Economy 24-Piece Doming
Punch Set with Wood Stand Punch Set
Tempered round anodized heads.
Sizes range from 7/94 - 1".
Weight: 3100gms/set.
Made in India.
Packaged in a cardboard box.
Weight: 1800gms/set. Made in India.
Adjustable Saw Frame
German-Style
3"/80mm. Weight: 210gms/set.
Made in India.
New I tem!
New I tem!
New I tem!
Item #
Description
DMPUNCH01 H/Q Doming Punch Set of 24
Item #
Description
DMPUNCH02 Economy 24 pieces
Tambour Needle Set
Magnetic Needle Case
Kit includes 3 needles: heavy,
medium and fine, plus one
needle holder.
This handy magnetic needle
case can hold dozens of needles
and the needle threader. The
magnetic backing enables it to
be attached either to a magnet
board (see pg. 127), or any
other metal surface.
Item #
TN75
Item #
CN1
Description
Tambour needle holder with 3 needles
Description
1-pc. Magnetic Needle Case
Needle Threaders
Description
German Style Saw Frame
Needle-Safe™
Available in 2 sizes, the Needle-Safe™ has a
magnetic lining on
both interior surfaces
to keep dozens of
needles neatly in place.
Item #
Description
NC01015 Sm. needle case: 4.5" x 1.75" x .375"
NC01101 Lg. needle case: 4.5" x 2.25" x .625"
Wooden Needle Cases
The “Flush” models have lids the same diameter as the body, the regular
models have a lid which is slightly wider than the body. These are a
required supply for 4 books by Jennie Might, including Beaded Needle
Cases-BK1447, Beaded Favors-BK1682, The Long and Short of It-BK1679,
& 4th Times the Charm-BK1666
(see book catalog).
Ultra Fine
NCW3
UFT
Threader with Cutter
NT1
Item #
UFT1
NT1
NT2
Item #
SAWF01
Two-pack
NT2
Description
Ultra Fine Needle Threader (for #13 needles) - Bag/10
Needle Threader with Thread Cutter - Minimum of 10 pieces
Needle Threader with Thread Cutter - 2 pieces per card
Item #
NCW2
NCW3
NCW2-FLUSH
NCW3-FLUSH
Description
Wooden Needle
Wooden Needle
Wooden Needle
Wooden Needle
NCW2-FLUSH
New!
Case 2.5" Long x .5" Wide Bag/2
Case 3.5" Long x .5" Wide Bag/2
Case-Flush, 2.5" Long x .5" Wide Bag/2
Case-Flush, 3.5" Long x .5" Wide Bag/2
85
wire tools
Wig Jig Pegs
These pegs expand your wire
designing possibilities when
using transparent Wig Jigs.
They come in a variety of
shapes and sizes. Available for
the Olympus, Olympus-Lite
or the Delphi.
Square Super Pegs Large
(1/2", 5/8", 3/4")
Delphi Lg. Square WJDSQ1
Square Super Pegs Small
(1/4", 5/16", 3/8")
Delphi Sm. Square WJDSQ2
Round Super Pegs Small
(3/16", 1/4", 5/16", 3/8", 7/16", 1/2")
Olympus Sm. Rnd. WJSUPERPEGSM
Delphi Sm. Rnd. WJDELPHIPEGSM
Round Super Pegs Large
(5/8", 3/4", 7/8")
Olympus Lg. Round WJSUPERPEGLG
Delphi Lg. Round WJDELPHIPEGLG
Extra Metal Pins (20 per bag)
3/32" x 3/4" Pins WJOLYMPUSPIN1
3/32" x 5/8" Pins WJOLYMPUSPIN2
1/16" x 5/8" Pins WJDEPHIPIN
Wig Jig Dowels
Great for pressing wire between the jig for pegs,
for coiling wire and for making jumprings. Get
into those hard-to-reach areas. Dowels are 1/8",
3/16", and 14" in diameter.
WJDOWEL
Spiral Makers
Olympus WJSPIRALOL
Delphi WJSPIRALDELPHI
Wigjig® Olympus
Wigjig® Olympus-Lite
Wig Jig Olympus is a 5" x 5" clear
acrylic wire for jig with 481 holes
and 20 removable pegs. Simply lay
the Wig Jig Olympus on top of
anything, set the pegs in place to
create endless possibilities. Includes 5
templates for finishing pieces:
Flower, Loopy Chain, Endless
Loops, Lantern and Trio of Chains.
This less expensive version of the Olympus
has a smaller work area but the same size
pegs and spacing as the Olympus. This was
done intentionally so that you can
interchange existing Olympus accessoriesSuper Pegs & Spiral Maker- with the new
Olympus-Lite. Made of aircraft-quality acrylic, it is clearly the best
entry level jig on the market. All Olympus accessories work on the
Olympus-light.
Item #
WJOLYMPUS
Item #
WJOLT
Description
Wigjig® Olympus 5" x 5"
WigJig Centaur
Wigjig®
Electra & Cyclops
The creators of the original clear acrylic
Wig Jig now bring the next generation
in wire working jigs: the Electra &
Cyclops. These transparent Wig Jigs have
a peg template in a starburst pattern to
facilitate making designs with curves,
stars, circles and new angles. You can
make wire components not possible on
any other jig. The Electra has the same
size pegs as the Olympus and OlympusLite, while the Cyclops has smaller pegs
and closer holes like the Delphi and
accordingly, designs made on the
Cyclops are smaller and more delicate.
All of the accessories for both the
Olympus can be used with the Electra
and all of the accessories for the Delphi
can be used with the Cyclops. Both jigs
include 10 metal pegs and wire designing
tips. Measures 5" x 5".
Item #
WJCYCLOPS
WJELECTRA
86
Description
Wigjig® Olympus-Lite
The Centaur combines the round hole pattern of the WigJig Cyclops with
the square hole pattern of the WigJig Delphi to provide the most
capability for designing jewelry of any jig. You can make wire components
not possible on any other single jig. The Centaur has smaller pegs and
closer hole spacing of the WigJig Cyclops and Delphi so it is excellent for
making jewelry wire components that are smaller and more delicate.
Electra
Includes jig with 441 holes, and comes with 20 metal pegs. Super Pegs
and Spiral Makers for the WigJig Delphi fit the Centaur. The Centaur
can make almost all
the jewelry designs
that can be made
on the WigJig
Delphi and almost
all the designs that
can be made on the
WigJig Cyclops.
Cyclops
Description
Wigjig® Cyclops 5" x 5"
Wigjig® Electra 5" x 5"
Item #
WJCENT
Description
4" Centaur jig
wire tools
Wigjig® Delphi
Wire Whacker
This 3 x 3" clear acrylic wire form jig with
181 holes and 20 removable pegs, has
smaller pegs and closer holes than the
Olympus and Olympus-Lite. Accordingly,
designs made on the Delphi are smaller and
more delicate. This is a great addition to the
Olympus jigs since it facilitates making matching sets of jewelry. For
example. Smaller earring components can be made on the Delphi to
match larger necklace and bracelet links made on the Olympus. It also
works very well for paper arts designs.
Press and harden your
wire designs using the
Wire Whacker with
your hand or hammer!
Item #
WJDELPHI
Description
3" x 3" Wigjig® Delphi
• Easy-to-handle, simple-to-use
• Works with most wire gauges
• Won’t mark or nick most types
of wire, including: Gold, GoldFilled, Sterling Silver & Copper
• Wire diameter doesn’t change
WSI
!
New I tem
Steel Bench Block
with Wood Base
• Constructed of finely polished
case-hardened steel with a sturdy
hardwood backing
• Ideal for flattening wire, laying
out work or chasing
• Measures 4" x 4" x 1"
• Instructions for hardening wire
are included on package
(additional block sold separately)
After placing your wire designs between the two Wire Whacker boards,
whack the top board with your hand or hammer. Your wire designs will
harden and retain their shape!
Item #
WSI
BBW44
Steel
Bench Blocks
Useful for flattening,
laying out or chasing,
these blocks are
constructed of tool steel;
ground flat, polished and
case-hardened. Available
in two sizes.
BB44
sold separately
Item #
BBW44
Description
Wire Whacker
Description
Bench Block
Item #
BB22
BB44
Description
Small: 2.5" x 2.5" x .5"
Large: 4" x 4" x 1"
Thing-A-Ma-Jig
The newest in inexpensive jigs to hit the
market are now available! The Thing-A-Ma-Jig
allows crafters to form wire into stunning
designs. The patterns and shapes that can be
created are endless.
Thing-A-Ma-Jig Beginner
A clear plastic 3" x 4" jig which can be placed
on top of any design. Includes plastic pegs,
and 2 yards of copper, silver and gold craft
wire. Complete with basic wire tips. JIG25
Thing-A-Ma-Jig Deluxe
An aluminum, 4-1/2 " x 5-1/2" wire jig.
Includes various metal pegs. Complete with
basic wire tips. JIG100
Item #
JIG25
JIG100
Description
Thing-A-Ma-Jig Beginner, 3" x 4" wire jig
Thing-A-Ma-Jig Deluxe, 4.5" x 5.5" wire jig
JIG100
JIG25
87
wire tools
Knitting Spools
The spools are made in Ohio of hard maple. They have been
grooved to fit in your hand for more ergonomic working than
other spools that are sold for fiber work. Each spool comes
packaged in a plastic tube with a stylus for manipulating the
wire to create wire and bead necklaces. Also available is a
natural rubber band that is
made to fit over the knitting
spools for enhanced grip.
With the rubber band on
the spool, less pressure is
needed to hold the spool
while working.
KS3
KS5
KSRB
Item #
KS3
KS5
Description
3 Pin Knitting Spool
5 Pin Knitting Spool
Wyr Knittr™
Wire is hot... Knitting is hot.
Combining the two is almost too
hot to handle! Introducing the
Wyr Knitter, the most significant
innovation for using wire to
date. The Wyr Knittr uses 28, 30
or 32 gauge wire to knit mesh
tubing for making jewelry,
embellishing scrapbook pages
and creating home decor accents.
It also knits in beads by just
dropping them through the
center of the machine into the
wire mesh. Or, thread the wire
with seed beads or small bugle
beads for even more specialty
effects. Wire mesh can be
flattened, compressed, braided,
folded, twisted and more. Kit
includes an innovative spool clip
for keeping wire on spool while
knitting and five project patterns.
Item #
WK2495
by Artistic Wire™
A brand new wire tool that helps
you direct and use your wire
with precision. Acts like a needle
for your wire. Set comes with
the Writer, 2 spools of wire (5
yds. each), and jig patterns. May
be used with all jigs (sold
separately). Used with 5 yard
spools found in the “Buy The
Dozen” put up (on pg. 98).
88
Description
Knitting Spool Rubber Band
Wooden Weaving Dolls
Originally marketed as a children’s toy, this simple to use knitting spool
makes knitting wire fun and easy. Features 4 bent pins on top of the
spool to help slide your wire on
and off. Includes instructions and
4-1/4" wooden
rod for lifting
wire over the
pins. Available
in four
assorted colors:
Red, Yellow,
Green and
Pink.
Item #
WD630
Description
Wooden Weaving Dolls
Description
Wyr Knittr TM
Wire Writer
Item #
AWWW
Item #
KSRB
Description
Wire Writer
Round Your Wire!
Tool for Smoothing Wire Ends
With its European quality cup bur,
this simple to use tool is perfect for
smoothing the rough & often sharp
ends of cut beading wire. Features a
hardwood handle and 1.8mm bur.
Item #
RYW01
BUR18
!
New I tem
Description
Round Your Wire Tool with 1.8mm Cup Bur
1.8mm Cup Bur used with #RYW01
wire tools
Twist ‘n’ Curl™
The popularity of wirework, and the need for professional tools, has led to the creation of this ingenious
new product. The Twist ‘n’ Curl can take much of the drudgery and uncertainty out of making coils or
tight spirals for wirework projects. The stem of this T-shaped tool joins the cross bar at its midpoint. The
cross bar has a hole for securing the wire as it being twisted around the stem into smooth, even spirals.
TNCMINI
TNC2
Item #
TNC
TNC2
Description
Heavy Duty 1 Piece
Standard with Removable Mandrill
TNC
Item #
TNCMINI
Description
2 Tools, Different Diameter Mandrills
The Coiling Gizmo
Wire Draw Plate
An economy coiling tool to help create and design jewelry from coiled
wire. Make a coilspring with wire coiled around one of the two crank
rods. A core wire is inserted into this spring. Coiling it again will produce
a bead. Detailed instructions with photos are included. CG100
A simple way to make wire based chain
round & smooth and to condense the
diameter of the chain without scratching
or marring the wire. Includes complete
directions for using the plate and can be
used with any soft wire.
Item #
DPDELUXE
Description
Wire Draw Plate
Wire Worker
Item #
CG100
Description
The Coiling Gizmo
Spinster
Make beautiful multi-colored rope using On
the Surface Spinster. Choose from the color
coordinated cards and make eye-catching
embellishments. Perfect for necklaces, purse
handles, or amulet bags.
Item #
OTSSPN
Description
Spinster
Miniature Horn Anvil
High quality, all steel construction.
Ideal for precision work.
Item #
AN112
Description
Miniature Horn Anvil
by Artistic Wire™
Make a variety of wire beads with the Wire
Worker. It includes an assortment of mandrels
& instructions that make creating different
shapes and sizes fun and easy! Wire Worker
includes wire, 6 mandrels, handle and
instructions.
Item #
AWWK
Description
Wire Worker by Artistic Wire
TM
The Handi Bender
The Original Wire Bending Jig
The handi-bender is designed to handle steel
and softer wires up to 1/4" in diameter. The
handi-bender has hundreds of uses. Great for
making circles, angles, spirals, coils, loops, and
curves, which can easily be incorporated into
your wire project/jewelry. Made of rugged die
cast aluminum and includes pins for bending.
Item #
WBJ1
Description
The Handi Bender
89

professional quality pliers

Transcription

Similar documents

Master Toolkit Model ITK-MAS-2612 includes all of following Tools

1/35 American M29C Weasel

Cold Planers

ILSCO Irreversible Grounding Products Brochure

Section C - Tools - Atlantic Stained Glass

product - Deacero

Process Controls

HK-150 - Alcoa