Centurion™ Lightbars

Transcription

Catalog LB02
Count on Whelen, the leaders in
Emergency Warning,
to design integrated siren and
light control systems that put
state-of-the-art performance in
packages that are easily
configured to your exact needs.
Whelen Products are
designed & manufactured
in the U.S.A.
About Our Lightbars
Lightbar Comparison Chart
FEATURES
Standard Switching
Low Current Switching
STROBE
Switching Current
Output Switching Number of Control Lines
Number Outlets per Power Supply
Maximum Power Supplies Per Bar
Input Power per Power Supply
Output Power per Power Supply
Energy per outlet (watts) All Lamps Connected
Input Voltage
Input Current per Power Supply
Maximum Number of Strobes
ScanLock™ Flash Patterns
Number of Flash Patterns, Strobe
Flash Patterns, Strobe
HALOGEN
Switching Current (per 20 watt lamp)
Switching Current (per 27 watt lamp)
Maximum Number of Halogens
ScanLock Flash Patterns
Number of Flash Patterns, Halogen
Flash Patterns, Halogen
Flashing Take-Downs
Flashing Alleys
Halogen Rotator (per 50 watt bulb)
LED
Switching current (per full size panel)
Maximum Number of LED Panels
Type of LED Used
Number of LEDs per Panel
ScanLock Flash Patterns
Number of Flash Patterns, LED
Flash Patterns, LED
TRAFFIC ADVISOR
Halogen
LED
Strobe
Strobe/Halogen
Full Size
Duplex
Control
OTHER DATA
Messenger
AMECA Certified to SAE and CA XIII
Size, Height (without feet)
Size, Depth
Size, Length, Standard
Optional Lengths
9M
Ultra
Y
Y
<.5 amps
6
4
3
75
60
15
12*
6
12
Y
10
G
Ultra-Freedon
LFL-Patriot
LFL-Liberty
Y
Y
Y
Y
-
<.5 amps
3
4
3
115
90
22.5
12
9
12
Y
10
G
-
<.5 amps
3
4
2
115
90
22.5
12
9
8
Y
10
I
-
2.1/9
2.1/9
2/6
^
27/115
20/90
10/22.5
12
2.1/9
8
Y/10/1
G/Comet
<.5 amps
<.5 amps
10
Y
5
HC
Y
-
<.5 amps
<.5 amps
8
Y
6
HC
Option
Option
-
<.5 amps
4
Y
5
HC
Y
-
<.5 amps
4
Y
4
HB
Option
Option
-
<.5 amps
4
Y
5
HC
Y
-
1.5 amps
8 (dual)
Y/1
3.7 amps
<.5 amps
10
5mm
88
Y
5
HC
<.5 amps
8
5mm
88
Y
16
LA
<.5 amps
12
Ultra-LED™
12/8
Y
21
LC
<.5 amps
12
5mm
56
Y
15
LB
<.5 amps
16
Ultra-LED™
12/8
Y
21
LC
<.5 amps
8
5mm
80
-
Y
Y
Y
Y
Y
TACTRL1A
TACTLD1
Y
Y
Y
Y
Y
TACTRL1A
TACTLD1
Y
Y
TACTLD1
Y
Y
Y
3 Wire Control
Y (TIR6)
Y
TACTLD1
Y
Y
TACTRL1A
Y
2.5
12
44/49/54
-
Y
2.5
12
44/49/54
-
Y
6.37
11.89
48/52/60/72
-
Y
Y
Y
Y
Y
Y
3.75
3.75
2.5
10
12
12
44/50/55
44/50/55
44/50/55
60 / 66 / 72 / 77 / 82 / 88 / 93 / 98
* = 12/24 volt standard, options are 12 volt standard
^ = Depends on options selected
G = CometFlash, DoubleFlash, TripleFlash, Rapid Rate, Action Flash,
Modu-Flash, Micro Burst II, Long Burst Flash, Action Scan
I = CometFlash, Action Flash, Long Burst Flash
HB = DoubleFlash 60, Single Flash 100, Single Flash 150, Steady On
HC = Single Flash 100, Single Flash 150, Signal Alert, CometFlash,
Steady Burn override on one pair
Centurion
LC = CometFlash 150 (Alternating, Simultaneous & California),
LA = Single Flash 75, Single Flash 375, CometFlash 75, Signal Alert 75,
DoubleFlash 240 (Alternating & Simultaneous), DoubleFlash
Steady On
120 (Alternating & Simultaneous), Single Flash 375 (Alternating
LB = Comet Flash 75, DoubleFlash 120, Rapid Rate 300, Rapid Rate 150,
& Simultaneous), Single Flash 150 (Alternating & Simultaneous),
Rapid Rate 60, Action Flash, Modu-Flash, Signal Alert 75,
Single Flash 75 (Alternating & Simultaneous), Signal Alert 150
Signal Alert 50, Simul-Blast, Zig Zag Blast, Random Blast,
(Alternating & Simultaneous), Action Flash (Alternating &
Zig Zag I, Zig Zag II, Steady On.
Simultaneous plus Alternating/Simultaneous), Modu-Flash
(Alternating & Simultaneous), Action Scan, Steady On
All Edge®Ultra™, 9M & LFL Lightbars offer Modular Design.
To help you build your Lightbar,
Whelen Worksheets are available in print or
“Lightbar Wizard” build-a-bar program is
available on disk or on our Website at:
www.whelen.com
All inboard
lighthead
modules are the
same size and can be placed
anywhere in the lightbar.
End strobe modules slide
in channels of
the extruded aluminum
housing.
Lighthead modules
snap in for a tight
secure fit.
Mate-N-Lok
connectors snap
together for
easy
lighthead
replacement
or additions.
®
Whelen Products are
in the U.S.A.
®
Edge 9M Lightbars
Built on the classic Edge
9000 extruded aluminum
I-Beam chassis, the 9M
Series is a highly effective,
user friendly and cost
efficient addition to the Edge
family. Available in four, six,
eight, ten or twelve strobe
versions, 9M features
modular construction
“snap-in/lock-in” components for ease of service,
exchange or upgrade.
TM
■ Classic Edge proportions with
straightforward, modular construction
for changes, upgrades or service.
■ Models include 4, 6, 8, 10, or 12
strobe lightheads plus up to ten secondary
warning, halogen or LED modules.
■ Optional, built-in Traffic Advisor™
in strobe, LED or halogen versions.
Modular design. Lamp modules and
slide-in lenses are of equal size
and can be placed anywhere in the
lightbar.
■ End caps with clear lenses and
color inner filters allow individual color
selection of front and rear strobes.
■ Color filters are also available for
duplex light modules.
■ Available with optional ScanLock™
flash pattern control (using an external
connection) that lets you toggle through
ten strobe, halogen and LED flash patterns and lock in the pattern you select.
Selected pattern is stored in non-volatile
memory until you decide to change.
Internal ScanLock feature is standard.
■ ScanLock allows each power supply
and flasher board to be programmed in
a different flash pattern.
■ Select up to 3 power supplies
(12 strobes max.) and 2 flasher boards
per lightbar (8 halogen flashers).
■ Each flasher runs up to 4 lightheads
and includes steady burn override for
one pair of lights to be used for flashing
take-downs, etc.
■ All non-duplex options are available
in kit form, field-upgradeable by
distributor, installer or user.
■ Passenger side, 15’ external cable
harness, standard on 9M Low “LC”
Current lightbars, includes two (8 gauge)
power cables to the battery, and sixteen
low power (22 gauge) function wires for
connection to the customer supplied
switch control. These low power function
wires need less than 1/2 amp to operate,
allow for simple operational independence of each light bar control function,
and make wiring a snap!
■ Optional driver side cable exit with
25’ power cable.
■ Three standard lengths: 44”, 49”
and 55”.
■ Custom lengths are 60, 66, 72, 77,
82, 88, 93 and 98”.
■ Permanent mount available with a
wide variety of gutter mounting options.
■ All models meet or exceed SAE
Class 1 and California Title XIII
requirements.
■ 5 year HDP warranty on power
supply, 2 year warranty on strobe tubes.
■ Size: 3-3/4” (95mm) H x 10”
(254mm) W x 44-3/8” (112cm) or
49-3/4” (126cm) or 55-1/8” (140cm).
9M14 Series
1 power supply, 4 strobes
9M144000: 44-3/8” lightbar
9M148000: 49-3/4” lightbar
9M142000: 55” lightbar
9M14-F Series
1 power supply, 4 front facing strobes
9M14400F: 44-3/8” lightbar
9M14800F: 49-3/4” lightbar
9M14200F: 55” lightbar
9M26 Series
2 power supplies, 6 strobes
9U24 Series
9M264000: 44-3/8” lightbar
9M268000: 49-3/4” lightbar
9U24-F Series
9M28 Series
9M284000: 44-3/8” lightbar
9M288000: 49-3/4” lightbar
9U36 Series
For options see listing on page 9
9U38 Series
9U40 Series
9U42 Series
LEGEND
Linear
Strobe
4E Series
Strobe
Power
Supply
Whelen Products are
in the U.S.A.
2
®
Edge Ultra ™ Strobe Lightbars
Modular construction and a
wide selection of light sources
and configurations give you
a custom lightbar with
"off-the-shelf" convenience.
TM
Ultra starts with new modular architecture "snap-in/lock-in" components, and
an internal wiring harness that lets you
select the exact strobe, LED and
halogen warning configuration you
require.New lenses and lamp modules
are of equal size so that they can be
placed anywhere on the lightbar.
Redesigned power supplies deliver 25%
more power to each strobe tube. Easily
upgradeable. For example, buy a fourstrobe version today; add up to eight
more strobe modules or other options
at a later date. Now, as never before,
you can easily build the exact lightbar
you've been looking for.
Distributors will appreciate the convenience of stocking basic assemblies with
factory installed wiring harnesses.
All Edge Ultra lightbars have a slightly
wider footprint, which provides greater
stability, and weight distribution on
today’s thinner vehicle roof construction.
■ Ultra LC is available in four, six,
eight, ten or twelve strobe models.
■ External cable is small in diameter
for easier installation.
■ Internal electronics allows for
twenty-two gauge external wiring for all
switching functions.
■ Low “LC” Current operation uses a
small diameter external cable harness
for operation with standard or low current switch controls or micro switches.
■ Secondary warning lamp modules
available are all strobe, all halogen, all
LED; combination: strobe over halogen,
strobe over LED, halogen over halogen,
LED over LED, and Brake/Tail/Turn.
■ All lamp modules and lenses
(except end caps and end position) are
the same size and can be placed anywhere on the lightbar.
■ Design your own lightbar in your
choice of strobe, halogen and LED
modules or build in a halogen or LED
Traffic Advisor™ if desired.
■ End caps with clear lenses are
available with colored inner filters for
individual front and rear color selection.
Filters are also available for color combinations on duplex light modules.
■ Strobe Power Supplies provide ten
externally selectable flash patterns
using new ScanLock™ (patent pending)
momentary selection switching.
■ New optional "Personality" module
provides enhanced control and added
flexibility to the operation of all lamps in
the Ultra LC. Contact your Whelen
Representative for details.
■ Three standard lengths: 44, 50 & 55”.
■ Pre-wired with 15' passenger side
exit cable. Optional driver side cable exit
is available.
■ New upgraded Strobe Power
Supplies are located on the ends of the
lightbar for ease of access and provide
25% more power to each strobe tube.
■ Custom lengths available: 60, 66, 72,
77, 82, 88, 93 & 98”.
■ All Ultra lightbars meet Class I SAE
requirements and California Title XIII
requirements.
■ 5 year HDP warranty on power
supply, 2 year warranty on strobe tubes.
■ Size: 3-3/4” (95mm) H x 12”
(304mm) W x 44-3/8” (113cm) or
49-3/4” (126cm) or 55-1/8” (140cm)
9U24 Series
1 power supply,4 strobes
9U244000: 44-3/8” lightbar
9U248000: 49-3/4” lightbar
9U242000: 55” lightbar
9U24-F Series
1 power supply, 4 strobes
9U24400F: 44-3/8” lightbar
9U24800F: 49-3/4” lightbar
9U24200F: 55” lightbar
9U36 Series
9U364000: 44-3/8” lightbar
9U368000: 49-3/4” lightbar
9U38 Series
9U384000: 44-3/8” lightbar
9U388000: 49-3/4” lightbar
9U40 Series
9U404000: 44-3/8” lightbar
9U408000: 49-3/4” lightbar
9U42 Series
9U424000: 44-3/8” lightbar
9U428000: 49-3/4” lightbar
9U24 Series
9U24-F Series
9U36 Series
9U38 Series
9U40 Series
9U42 Series
LEGEND
Linear
Strobe
4E Series
Strobe
3
Power
Supply
Whelen Products are
in the U.S.A.
®
Edge Ultr a™- Freedom ™™ LED Lightbars
Start with four Linear-LED™ modules
and add up to eight more
Linear-LED modules, or different
options, for a total of twelve lights
in the combination you need.
TM
New Ultra Freedom features the next
generation, all Linear-LED™ technology
in a warning package that rivals strobe
in impact, but provides heavy-duty, long
life operation with low, low current
draw. All Ultra lightbars are made for
rough treatment and long hours. From
the extruded aluminum chassis on up,
every component is designed and
field-tested for performance under just
those conditions.
■ Choose from a basic four corner
“LINEAR12U” LED model, then add up
to 8 “LINEAR8U” LED directional modules,
for a total of 12 Linear-LED™ modules.
■ An all Linear-LED™ (patent pending)
lightbar featuring the next generation
of ultra bright, ultra wide-angle LED
technology.
■ Build your lightbar in any color
combination with take downs and LED
modules in any position you want.
■ Aerodynamic profile, with the stateof-the-art optics.
■ Three standard lengths: 44, 50 & 55”.
■ Optional halogen flashing take-downs,
alley lights and LED Traffic Advisor™.
■ Clear outer lenses are standard,
optional color lenses available.
■ Optional five or six LED Traffic
Advisor™ with ultra high intensity TIR6
LED modules.
■ Each group of four LED lightheads
are driven by an all electronic module
that provides proper input power and
choice of flash patterns. You are
assured of equal light intensity from
each lighthead through a voltage range
of 10 – 16 VDC.
■ ScanLock™ allows you to scan
through ten flash patterns and lock in
the desired pattern. Every pair of lights
can have its own unique pattern.
■ All models exceed SAE requirements.
■ Extruded aluminum I-beam chassis
provides superb strength and stability.
■ Slightly wider footprint provides
greater stability and weight distribution
on the thinner roof construction of
today’s vehicles.
■ All LED modules feature new wideangle design for increased performance.
■ Low “LC” current operation uses a
■ Prewired with 15’ passenger side
cable exit, optional driver side cable exit
is available.
■ Custom lengths available: 60, 66, 72,
77, 82, 88, 93 & 98”.
■ 5 year HDP warranty on LEDs.
■ Size: 3-3/4” (95mm) H x 12”
(304mm) W x 44-3/8” (113cm) or
49-3/4” (126cm) or 55-1/8” (140cm)
UL Series
4 corner LINEAR12U LEDs, 1 electronic module
UL4****: 44-3/8” lightbar
UL8****: 49-3/4” lightbar
UL2****: 55” lightbar
* Replace asterisk in model number with color of LED
lightheads required.
A = Amber, B = Blue, C = White, R = Red
LEGEND
LINEAR12U
LED Module Electronic
Module
Whelen Products are
in the U.S.A.
4
®
Edge LFL-Patriot ™™ Strobe Lightbars
Edge® LFL Patriot™ starts with
high-impact strobe warning, then
lets you add LED and halogen
components to fit your exact
requirements.
TM
Edge performance and reliability in our
newest and lowest profile lightbar.
Extremely low profile (2 ½" high) with
all the pizzazz of a conventional height
lightbar. The Edge LFL Patriot Series
combines the latest strobe, LED and
halogen technology into compact stateof-the-art design. Start with 4, 6, or 8
strobes and add up to 12 LED modules
and up to 4 halogen modules. Available
with an LED Traffic Advisor™.
All LFL Patriot lightbars have a slightly
wider footprint that provides greater
stability and weight distribution on the
thinner roof construction of today's
vehicles.
■ Sleek, aerodynamic profile, stateof-the-art optics.
■ Strobe, LED and halogen models.
■ LED modules feature new wide
angle LED's for increased performance.
■ Linear strobe tubes are soldered in
for reliability and heavy-duty service.
■ Strobe Power Supplies provide ten
externally selectable flash patterns
using new ScanLockTM (patent pending)
momentary selection switching.
■ Optional halogen take-downs, halogen alley lights, LED flashers (up to six
front and six rear).
■ Optional LED Traffic Advisor with
two-wire control, which does not require
a special control head for operation.
■ New optional "Personality" module
provides enhanced control and added
flexibility to the operation of all lamps.
Contact your Whelen Representative for
details.
■ Low “LC” Current operation uses a
■ Three standard lengths: 44” (43.12”),
48” (48.50”) and 54” (53.89”).
■ Pre-wired with 15’ passenger side
cable exit. Optional driver side cable exit
available.
■ Extruded aluminum chassis
■ Five year warranty on power supply,
2 year warranty on strobe tubes, 5 year
warranty on LEDs.
■ Size: 2-1/2” (64mm) H x 12”
(304mm) W x 43-1/8” (109cm) or
48-1/2” (123cm) or 53-7/8” (137cm)
LL14 Series
1 power supply,4 strobes (2 front/2 rear)
LL144000: 43-1/8” lightbar
LL148000: 48-1/2” lightbar
LL142000: 53-7/8” lightbar
LL14-F Series
1 power supply, 4 strobes (4 front)
LL14400F: 43-1/8” lightbar
LL26 Series
2 power supplies, 6 strobes (4 front/2 rear)
LL264000: 43-1/8” lightbar
LL268000: 48-1/2” lightbar
LL262000: 53-7/8” lightbar
LL28 Series
2 power supplies, 8 strobes (4 front/4 rear)
LL284000: 43-1/8” lightbar
LL288000: 48-1/2” lightbar
LL282000: 53-7/8” lightbar
LL14 Series
LL14-F Series
LL1426 Series
Actual
height
LL1428 Series
LEGEND
Strobe
Linear
Strobe
Power
Supply
of
LFL
Patriot™
and
Liberty™
Whelen Products are
in the U.S.A.
5
®
Edge LFL-Liberty ™™ LED Lightbars
We put together the latest
Linear-LED™ technology, all the
super performance, high
reliability features needed to give
you maximum, heads up warning
in an extreme low profile lightbar
that’s almost undetectable on
the highways.
TM
New LFL Liberty features the next
generation, all Linear-LED™ technology
in a warning package that rivals strobe
in impact, but provides heavy-duty, long
life operation with low, low current
draw. All LFL lightbars are made for the
rough treatment and long hours that
your job demands. From the extruded
aluminum chassis on up, every
component is designed and field-tested
for performance under just those
conditions.
■ Choose from a basic four corner
“LINEAR12L” LED model, then add up
to 12 “LINEAR8L” LED directional
modules, for a total of 16 Linear-LED™
modules.
■ All Linear-LED™ (patent pending)
lightbar featuring the next generation
of ultra bright, ultra wide-angle LED
technology.
■ Build your lightbar in any color
combination with take downs and LED
modules in any position you want.
■ Sleek, aerodynamic profile with
state-of-the-art optics.
■ Three standard lengths: 43” (43.12”),
48” (48.50”) and 54” (53.89”).
■ Optional halogen take-downs and
alley lights.
■ Optional five or six LED Traffic
Advisor™ with ultra high intensity TIR6
LED modules.
■ Clear outer lenses are standard,
optional color lenses are available.
■ Each group of four LED lightheads
are driven by an all electronic module
that provides proper input power and
choice of flash patterns. You are
assured of equal light intensity from
each lighthead through a voltage range
of 10 – 16 VDC.
■ ScanLock™ allows you to scan
through ten flash patterns and lock in
the desired pattern. Every pair of lights
can have its own unique pattern.
■ Extruded aluminum chassis
■ Slightly wider footprint provides
greater stability and weight distribution
on the thinner roof construction of
today’s vehicles.
■ All LED modules feature new wideangle design for increased performance.
■ Low “LC” current operation uses a
■ Prewired with 15’ passenger side
cable exit. Optional driver side cable exit
available.
■ 5 year HDP warranty on LEDs.
■ Size: 2-1/2” (64mm) H x 12”
(304mm) W x 43-1/8” (109cm) or
48-1/2” (123cm) or 53-7/8” (137cm)
SL Series
4 corner LINEAR12L LEDs, 1 electronic module
SL4****: 43-1/8” lightbar
* Replace asterisk in model number with color of LED
lightheads required.
A = Amber, B = Blue, C = White, R = Red
LEDs remain colorless until lightbar is turned on for a
more stealth appearance.
LEGEND
Linear12
LED Module Electronic
Module
Whelen Products are
in the U.S.A.
6
Mini Lightbars
Compact Edge, LFL and Centurion
lightbars are useful where space
is at a premium.
9M StrobePlus+
9M with optional take downs
Halogen
TM
Strobe
9M Mini Edge and
StrobePlus+™ Mini Edge
■ Available in four or six strobe models in a compact 28-1/2" size.
■ Permanent mount, magnetic mount
and heavy-duty suction cup (four 5”
(127mm) heavy duty suction cups)
mounting available.
■ StrobePlus+ version is the answer
for a total range of driving conditions
from bright sunlight to heavy rain, driving snow or thick fog. It incorporates 4
halogen modules that flash simultaneously with the strobe lighthead to
reduce stroboscopic effect. Two front
and 2 rear strobes plus two front and
two rear halogen lamps. Includes
ISP4HS remote power supply.
■ Options for permanent mount models only, includes ScanLock™ with ten
selectable flash patterns. Internal
ScanLock is standard.
■ 5 year warranty on power supply,
2 year warranty on strobe tubes.
■ Size: 3-3/4” (95mm) H x 10”
(254mm) W x 28-1/2” (72cm) L.
9MMEDGEP: 4 Strobes, (2 front/2 rear),
permanent mount.
9MMEDGEM: 4 strobes, (2 front/2 rear),
permanent mount.
9MMEDGSP: 4 strobes, (2 front/2 rear),
suction cup mount.
9MMEDFFD: 4 strobes, (4 front),
permanent mount.
9MMEDG6P: 6 Strobes, (4 front/2 rear),
permanent mount.
9MMEDG6M: 6 strobes, (4 front/2 rear),
permanent mount.
9MMEDG6S: 6 strobes, (4 front/2 rear),
suction cup mount.
SSNF9MEP: StrobePlus+ 4 strobe, 4 halogen lamps, permanent mount.
Options:
9MTD2: two halogen take-down lights
9MALY: two halogen alley lights
9MFFI: two front halogen flashing lights
9MRFI: two rear halogen flashing lights
9MFFL**: two front LED flashing lights
9MRFL**: two rear LED flashing lights
Centurion™ Mini Lightbar
Edge® Mini LFL Patriot
■ 4 Strobe Mini LFL Patriot™ Series
Sleek, aerodynamic profile, with stateof-the-art optics in our lowest profile
lightbar.
■ Only 2-1/2” high and 17-1/4” or
22” in length.
■ Available in magnetic or permanent
mount.
■ Optional take downs, alley lights
and single flashers for 22” model only.
■ Extruded aluminum 2 piece chassis
will not sag, warp or bend.
■ 5 year warranty on power supply,
2 year warranty on strobe tubes.
■ Size: 2-1/2” (64mm) H x 12”
(304mm) W x 17-1/4” (44cm) or
22” (56cm) L.
MLFL17M: 17-1/4" magnetic mount.
MLFL17P: 17-1/4" permanent mount.
MLFL22M: 22" magnetic mount.
MLFL22P: 22" permanent mount.
Options:
LHALY: two halogen alley lights
LHTD1: one front halogen take-down light
LHRFL*: one rear LED flasher
LEGEND
Linear
Strobe
C200A000/C200A00E
400
400
Linear Strobe Strobe Halogen
CS Power Supply
C002A0**
LEGEND
LEGEND
SSNFMEDP
C200A000: Two rotating halogen beacons,
diamond mirror, 17’ wiring harness
C200A00E: Two rotating halogen beacons,
diamond mirror, 6” pigtail, no options available.
C002A0**: Two 22 watt, 360° strobe beacons, with color or clear domes housed in a
clear or color outer lens.
Options:
CDALY: two twin duplex alley lights
CDTD2: two twin duplex take-down lights,
clear filter
CDCRL: one twin duplex California steady
red identification light, red filter, driver side
CDCBL: one twin duplex California steady blue
identification light, blue filter, passenger side
CDFF**: two twin duplex front flashers,
electronic flasher, includes filter color of choice
CDRF**: two twin duplex rear flashers, electronic flasher, includes filter color of choice
CSEMF: substitute an electro-mechanical
flasher for solid state flasher (for one pair only)
CL14SF: two lower level intersector 14 series
strobes, front facing, includes 20 watt power
supply, clear only
CL17SF**: two lower level 17 series strobes,
front facing, includes 20 watt power supply
CL17SR**: two lower level 17 series strobes,
rear facing, includes 20 watt power supply
CCRUISE: two built in cruise lights
CCF*IN: color filter for rotator, installed
* Replace asterisk in model number with color lens desired.
A = Amber, B = Blue, C= Clear, G = Green, R = Red
9MMEDG6
9MMEDGE
Power
Supply
■ Useful for vehicles where space is
tight or where, due to the size of the
vehicle, the use of two mini lightbars
offers a strategic benefit over the use
of a single lightbar.
■ 22” (56cm) wide.
■ Permanent mount standard with two
1-1/2” high permanent mount brackets.
■ Optional slide bolt mounts and 5”
riser permanent mount available.
■ 3 year warranty on motor assembly.
■ Size: 6-3/8” (161mm) H x 12”
(304mm) W x 22” (56cm) L.
360°
Halogen “V”
Rotator Mirror Strobe
Power Supply
Whelen Products are
in the U.S.A.
7
Centurion ™ Lightbars
Bolder and wider profile, these rotating halogen and combination lightbars feature larger reflectors that
deliver twice the light intensity of any
other rotating lightbar on the market.
Combination strobe/halogen with
LED flashers and Take Downs
A bigger, bolder, brighter rotating halogen lightbar ideally suited for Police
vehicles. Rugged Centurion lightbars
are sized to hold a wide range of factory
or customer installed options including
a 123 dB speaker, corner strobes, halogen flashers and more. It's easy to
install, easy to maintain, and features
"shock mount" rotator plate design to
isolate motor and gear noise for surprisingly quiet performance. Build the
Centurion that meets all your requirements … now and down the road!
■ Two speed motors: 135 RPM outboard; 135 or 175 RPM inboard with a
double ball bearing motor assembly.
■ Snap-in 50 watt halogen lamps.
■ Extruded aluminum base never
warps or sags.
■ Captive tongue and groove design
secures dome to base with added moisture resistance.
■ Parts change easily using only a
screwdriver.
■ New mounting foot kit provides
wider foot print for greater stability.
■ Sizes are 48", 52", 60", and 72".
■ Models include solid color domes
with clear lower level lens and clear lens
dividers.
■ Prewired with 17’ driver side exit.
■ Exceeds SAE and California Title
XIII requirements.
■ A wide range of options, which can
be factory installed or easily added later
by the customer.
■ 3 year warranty on motor assembly.
■ Size: 6-3/8” (161mm) H x 12” (304mm) W
x 48” (122cm), 52” (132cm), 60” (152cm) or
72” (183cm) L.
Strobe version with optional
additional strobes and Traffic Advisor.
Four rotator with optional inner color
filters, center rotator, take downs and
outboard strobes.
CENTURION™ SERIES 360° STROBE
LIGHTBARS
C2008000, C2002000, C2000000, C2007000
Includes Two 22 watt, 360° Strobe Beacons
with 30° Mirrors
Last Two Digits Indicate Color of Internal Strobe Lens
C4008000, C4002000
C00280**: 48”
C00220**: 52”
C00200**: 60”
C00270**: 72”
CENTURION™ SERIES ROTATING
LIGHTBARS
C4000000, C4007000
C00280**, C00220**, C00200**, C00270**
LEGEND
Halogen Diamond “V”
Rotator Mirror Mirror
360°
Strobe
Model numbers ending in “E” indicate model without
options available.
C2008000/C200800E: Two Rotators,
Two “V” Mirrors, 48”
Two “V” Mirrors, 72
C4008000/C400800E: Four Rotators,
Three Diamond Mirrors, 48”
Three Diamond Mirrors, 72” Long
* Replace asterisk in model number with lens color desired.
A = Amber, B = Blue, C= Clear, G = Green, R = Red
Strobe Lightbars
Two 22 watt, 360° Strobe beacons and
30° mirrors with color or clear domes
housed in a clear or color outer lens.
Standard lengths are 48”, 52”, 60” and
72”.
Combination Lightbars
Strobe, rotating, flashing halogen or
LED combination lightbars available.
Contact factory for information.
Whelen Products are
in the U.S.A.
8
®
Edge 9M ™ Lightbar Options
Piercer II™ Dual Strobe
Alley Light
Halogen
Flasher
Lo-Pro Siren
Take-Down
LED Flasher
OPTIONS FOR 9M™ SERIES LIGHTBARS
9MSCANLK 15' five conductor cable allows
for external individual ScanLock™ flash patterns
of each power supply and flasher module
9MDSCBL driver side cable exit, includes
25" power/ground cable
SA40 Lo-Pro speaker
SA41 Lo-Pro speaker kit for customer
supplied driver
9MALY two halogen alley lights
9MDALY two duplex halogen alley lights
9MTD2 two halogen take-down lights, wire
through auxiliary inputs
9MDTD2 two duplex halogen take-down
lights, wired through the auxiliary input
9MH2** two halogen lights, includes flasher
with steady burn priority mode
9MDH2** two duplex halogen lights, includes
flasher with steady burn priority mode
9MH4**** four halogen lights, includes
flasher with steady burn priority mode for
one set of lights
9MDH**** four duplex halogen lights,
includes flasher with steady burn priority
mode for one set of lights
9ML2** two LED panels, includes flasher
with steady burn priority mode
9MDL2** two duplex LED panels, includes
flasher with steady burn priority mode
9ML4**** four LED panels, includes flasher
with steady burn priority mode for one pair
of lights
9MDL**** four duplex LED panels, includes
one set of lights
9MC4**** two halogen lights and two led
panels, includes flasher with steady burn
priority mode for one pair of lights
9MDC**** two duplex halogen lights and
two duplex led panels, includes flasher with
steady burn priority mode for one set of lights
PRM1S** Piercer II™ dual strobe nose piece
with built-in power supply.
PRM2CCC PierceAlert™, twin oscillating
lamp, clear housing with clear lens
PRM2C** PierceAlert™, twin oscillating
lamp, clear housing with color lens
PRM2*CC PierceAlert™, twin oscillating
lamp, color housing with clear lens
PRM2*** PierceAlert™, twin oscillating
lamp, color housing with color lens
9MCRUISE LED cruise lights
9MSIGNP printed sign
9MSIGNL lighted sign
9UOPTI44 44" lightbar pre-wired for 3M
model 9592 Opticom™
Duplex LED Flasher
Under Linear Strobe
Six panel LED Traffic Advisor™
model 9592 Opticom
model 9592 Opticom
9592 3M emitter for Edge® 9M lightbars
XT100 Cobra® Safety Alert® Warning Radar
transmitter
XR100WIR lightbar pre-wired for Cobra
XT100 radar transmitter (includes cable &
bracket)
TA9M05H built-in 5 halogen lamp Traffic
Advisor™ with control head, for 44" lightbar
TAD9M05H built-in 5 duplex halogen lamp
Traffic Advisor with control head, for 44"
lightbar
TA9M06H built-in 6 halogen lamp Traffic
Advisor with control head
TAD9M06H built-in 6 duplex halogen lamp
Traffic Advisor with control head
TA9M05L built-in 5 LED panels Traffic
Advisor with control head, for 44" lightbar
TAD9M05L built-in 5 duplex LED panels
Traffic Advisor with control head, for 44"
lightbar
TA9M06L built-in 6 LED panels Traffic
Advisor with control head
TAD9M06L built-in 6 duplex LED panels
Traffic Advisor with control head
TA9M05S built-in 5 strobe light Traffic
Advisor two wire control, includes power
supply, for 44" lightbar
TAD9M05S built-in 5 duplex strobe light
Traffic Advisor two wire control, includes
power supply, for 44" lightbar
TA9M06S built-in 6 strobe light Traffic
Advisor two wire control, includes power
supply
TAD9M06S built-in 6 duplex strobe light
Traffic Advisor™ two wire control, includes
power supply
9HFIL* half color filters for use with strobe
or halogen duplex modules
9UECFIL* corner color filter for use with
clear end cap
LENSGLUE optional lens section glued
9MLTH1 custom length up to 83"(60", 66",
72", 77", or 82")
9MLTH2 custom length 83"+ (88", 93", or 98")
MGM02 built-in Smart Arrow Messenger®
Series
PierceAlert™ Twin
Rotators
OPTIONAL KITS FOR 9M™ SERIES
LIGHTBARS
CUSTOMER INSTALLED KITS
MKSCANLK 15' five conductor cable allows
for external individual ScanLock™ flash
patterns of each power supply and flasher
module.
MKALY two halogen alley lights kit, includes
harness, no end cap
MKALY** two halogen alley lights kit,
includes harness, two end caps with gaskets
and screws
MKTD2 two halogen take-down light kit.
includes two 5" clear lenses. wire through
auxiliary inputs.
MKH2** two halogen lights kit, includes
flasher with steady burn priority mode and
two 5" lens
MKH4**** four halogen light kit, includes
one set of lights and four 5" lens.
MKL2** two LED panel kit, includes flasher
with steady burn priority mode, and two 5"
lens.
MKL4**** four LED panel kit, includes
one pair of lights, and four 5" lens.
MKC4**** two halogen lights and two LED
panel kit, includes flasher with steady burn
priority mode for one pair of lights, LEDs
and four 5" lens.
TAMK05H built-in 5 halogen lamp Traffic
Advisor™ with control head kit, for 44" lightbar with two 15.8" amber lens.
TAMK06H built-in 6 halogen lamp Traffic
Advisor™ with control head kit with two
15.8" amber lens
TAMK05L built-in 5 LED panels Traffic
Advisor™ with control head, for 44" lightbar
kit with two 15.8" amber lens.
TAMK06L built-in 6 LED panels Traffic
Advisor™ with control head kit with two
15.8" amber lens
TAMK05S built-in 5 strobe light Traffic
Advisor™ two wire control, includes power
supply, for 44" lightbar kit with two 15.8"
amber lens.
TAMK06S built-in 6 strobe light Traffic
Advisor™ two wire control, includes power
supply kit with two 15.8" amber lens.
MK9M4S2 two strobe light upgrade kit,
includes two 400 series strobes and one
9M4S power supply
MK9M4S4 four strobe light
upgrade kit, includes 4 - 400
series strobes and one 9M4S
power supply
* Replace symbol in model number with letter
indicating lens color or LED color desired:
A=Amber, B=Blue, C=Clear/White,
Whelen Products are
R=Red, G=Green
in the U.S.A.
9
®
Edge Ultra ™ Lightbar Options
Halogen
Flasher
Take-Down
Duplex LED Flasher
Under Duplex
Linear Strobe
Piercer II™ Dual Strobe
PierceAlert™ Twin
Rotators
Duplex Alley Light
Under DuplexLinear Strobe
Six panel Halogen Traffic Advisor™
LED Flasher
Corner Color Filters
Six panel LED Traffic Advisor™
OPTIONS FOR ULTRA™-LC SERIES
LIGHTBARS
9UDSCBL driver side cable exit, includes 25'
power/ground cable
9LALY two halogen alley lights
9LDALY two duplex halogen alley lights
9LTD2 two halogen take-down lights
9LDTD2 two duplex halogen take-down
lights
9LTD1 one halogen take-down light
9LFTA flashing take-down & flashing alley
light enable module, requires purchase of
take-down and/or alley lights
PRL1S** Piercer II™, dual strobe, nose
piece with built-in power supply
PRL2CCC PierceAlert™, twin oscillating
lamp assemblies, clear housing with clear
windows
PRL2C** PierceAlert™, twin oscillating lamp
assemblies, clear housing with color windows
PRL2*CC PierceAlert™, twin oscillating lamp
assemblies, color housing with clear windows
PRL2*** PierceAlert™, twin oscillating lamp
assemblies, color housing with color windows
9LCRL one halogen California steady red
identification light
9LCBL one halogen California steady blue
identification light
9LFFL** two LED flashing lights, front facing
9LDFFL** two duplex LED flashing lights,
front facing
9LRFL** two LED flashing lights, rear facing
9LDRFL** two duplex LED flashing lights,
rear facing
9LFFI two halogen flashing lights, front facing
9LDFFI two duplex halogen flashing lights,
front facing
9LRFI two halogen flashing lights, rear facing
9LDRFI two duplex halogen flashing lights,
rear facing
9MCRUISE LED cruise lights
9LCRUISE four incandescent cruise lights
XT100 Cobra® Safety Alert® Warning Radar
Transmitter
XT100WIR lightbar prewired for Cobra's
XT100 Radar Transmitter (includes cable &
bracket)
9UOPTI55 55" Edge Ultra™ lightbar pre-wired
for 3M Model 9592 OPTICOM
9UOPTI49 49.75" Edge Ultra lightbar prewired for 3M Model 9592 OPTICOM
9UOPTI44 44" Edge Ultra™ lightbar pre-wired
for 3M Model 9592 OPTICOM
9592 3M Emitter for Edge Ultra lightbars
9LMATRIX special configuration other than
standard
9LSIGNP printed sign for Edge lightbar
9LSIGNL LED backlighted sign for Edge
lightbar, amber
9LPREWIR Edge lightbar pre-wired to
Whelen switch control
TA9LLED built-in LED Traffic Advisor™,
programmable flash patterns std.
(not available in all models)
TAD9LLED built-in duplex LED Traffic
Advisor™, programmable flash patterns std.
(not available in all models)
TA9L00A Built-in halogen Traffic Advisor™,
programmable flash patterns standard. (not
available on all models)
TAD9L00A Built-in duplex halogen Traffic
Advisor, programmable flash patterns
standard (not available in all models)
9HFIL* half color filter for strobe or halogen
duplex modules
9UECFIL* corner color filter for use with
clear end cap
LENSGLUE optional lens section, glued
9LLTH1 custom length up to 83" (except
standard 44.375", 49.75" and 55") (60", 66",
72", 77", or 82")
9LLTH2 custom length 83+" to 100" (88",
93", or 98")
MGM02 built-in Smart Arrow Messenger®
Series
OPTIONAL KITS FOR
EDGE® ULTRA™-LC SERIES LIGHTBARS
UKH2** halogen light kit, includes two
halogen modules & two 5" lens specify lens
colors for use as take-down, work lights or
flashers
UKL** LED light kit, includes two LED
panels & two 5" color lens.
TAUK05A Traffic Advisor kit, includes five
halogen modules, internal/external harness,
TACTRL1A & two 15.8" amber lens (not
duplex)
TAUK06A Traffic Advisor kit, includes six
halogen modules, internal/external harness,
duplex)
TAUK05L Traffic Advisor kit, includes five
LED modules, internal/external harness,
duplex)
TAUK06L Traffic Advisor kit, includes six
LED modules, internal/external harness,
duplex)
UKEB42 two strobe light upgrade kit,
includes 2-4ELTUBE and 1-EB4 power supply
UKEB44 four strobe light upgrade kit,
includes 4-4ELTUBE and 1-EB4 power supply
OPTIONS FOR EDGE® ULTRA™ LED
SERIES LIGHTBARS
ULH2CC two halogen flashing take-down
lights
ULALY two halogen alley lights
ULCRUZ** four LED cruise lights
ULTATIR5 five TIR6 LED Traffic Advisor,
includes control head, for 44” lightbar
ULTATIR6 six TIR6 LED Traffic Advisor,
includes control head
ULDSCBL driver side cable exit, includes 25'
power and ground cable
UKALY alley light kit, includes two halogen
modules, no end caps
UKALY** alley light kit, includes two
halogen modules, two end caps w/gaskets
and screws, specify end cap colors
* Replace symbol in model number with letter indicating
lens color or LED color desired:
A=Amber, B=Blue, C=Clear/White, R=Red, G=Green
Whelen Products are
in the U.S.A.
10
®
Edge LFL Patriot ™™ & Liberty ™™ Lightbar Options
Take-Down
Halogen Flasher
Alley Light
LED Flasher
Six panel LED Traffic Advisor™ for LFL-Patriot™
Cruise Lights
Six panel TIR6 LED Traffic Advisor™ for LFL-Liberty™
OPTIONS FOR EDGE® LFL PATRIOT™
SERIES LIGHTBARS
OPTIONAL KITS FOR EDGE®
LFL PATRIOT™ SERIES LIGHTBARS
NOT ALL OPTIONS AVAILABLE ON ALL MODELS
LLDSCBL driver side cable exit, includes 25'
power/ground cable
LLALY two halogen alley lights
LLTD2 two halogen take-down lights
LLTD1 one halogen take-down light
LLFTA flashing take-down & flashing alley
light enable module, requires purchase of
take-down and/or alley lights
SLCRUZ** LED cruise lights
LLCRUISE four cruise lights
LLFFL** two LED flashing lights, front facing,
red and/or amber
LLTALED5 five LED panel Traffic Advisor™,
two wire control (no control head)
LLTALED six LED panel Traffic Advisor, two
wire control (no control head)
LLMATRIX special configuration other than
standard
LLPREWIR Edge® lightbar pre-wired to
Whelen switch control
LENSGLUE optional lens section, glued
50LENSL* 500 series non-optic lens
LLESFIL* LFL end strobe filter
LKALY** alley light kit, includes two halogen
modules and two 500 series alley inserts, no
end caps
LKH2** halogen light kit, includes two halogen modules & two 5 1/16" lens, specify
lens colors for use as take-down or work
lights
LKL** LED light kit, includes two LED panels & two 5 1/16" color lens, specify led colors, amber or red
TALK05A Traffic Advisor kit, includes five
LED modules, personality module & two
15.8" amber lens, LC series only
TALK06A Traffic Advisor kit, includes six
LED modules, personality module & two
15.8" amber lens LC series only.
LK4122 two strobe light upgrade kit,
includes 2- 500 series strobes & 1-LFL412
power supply
LK4124 four strobe light upgrade kit,
includes 4- 500 series strobes & 1-LFL412
power supply
OPTIONS FOR EDGE® LFL LIBERTY™
SERIES LIGHTBARS
SLD§§§§0 LED Linear8 direction inboard
warning lights
SLH2CC two halogen flashing take-down
lights
SLALY two halogen alley lights
SLCRUZ** four LED cruise lights
SLTATIR5 five TIR6 LED Traffic Advisor,
includes control head, for 44” lightbar
SLTATIR6 six TIR6 LED Traffic Advisor,
includes control head
SLDSCBL driver side cable exit, includes 25'
power and ground cable
* Replace symbol in model number with letter indicating
lens color or LED color desired:
A=Amber, B=Blue, C=Clear/White, R=Red, G=Green
§ Replace symbol with quantity/color of LED lightheads
required (maximum 12 modules).
Use X = 12, Y = 11 & Z = 10.
Order of colors are Red, Blue, Amber and White, i.e.,
SLD22220 = 2 Red, 2 Blue, 2 Amber & 2 White,
SLD0Z020 = 0 Red, 10 Blue, 0 Amber & 2 White.
Whelen Products are
in the U.S.A.
11
Centurion ™ Lightbar Options
Twin Duplex Take-Downs
Center Rotator
Twin Duplex Alley Light
Color Rotator Filter
One Twin Duplex Take-Down
Halogen Work Lights
6” x 4” Strobes
Eight panel Traffic Advisor™
17 Series Strobe
OPTIONS FOR CENTURION™ SERIES
LIGHTBARS
BUILT-IN (NOT ALL OPTIONS AVAILABLE IN ALL
MODELS)
CHSROTAC one high speed center rotator,
175 FPM, with two “V” mirrors
CHSROTAI two high speed inboard rotators,
175 FPM, with four “V” mirrors
CROTAC one center rotator w/ two “V” mirrors
C360I** two 22 watt 360° inboard strobe
beacons, 30° mirrors
C360I* one 22 watt 360° inboard strobe
beacon, 30° mirror
CDALY two twin duplex alley lights
CDTD2 two twin duplex take-down lights,
clear filter
CDTD2C one twin duplex take-down light,
center mounted, clear filter
CDCRLED one duplex California steady red
LED identification light, driver side
CDCRL one twin duplex California steady red
identification light, red filter, driver side
CDCBL one twin duplex California steady blue
identification light, blue filter, passenger side
CDFF** two twin duplex front flashers, electronic flasher, includes filter color of choice
CDRF** two twin duplex rear flashers, electronic flasher, includes filter color of choice
CSEMF substitute an electro-mechanical
CL14SF two lower level outboard/intersector
14 series strobes, front facing, includes 20
watt power supply, clear only
CL17SF** two lower level outboard 17
series strobes, front facing, includes 20 watt
power supply
CL17SR** two lower level outboard 17
series strobes, rear facing, includes 20 watt
power supply
CL17LF** two lower level outboard 17
series LED panels, front facing, includes
flasher
CL17LR** two lower level outboard 17
series LED panels, rear facing, includes
flasher
CU64SF two upper 6" x 4" strobes, front facing, includes center mounted power supply,
optional color filters available for use w/clear
outer domes
CU64SR two upper 6" x 4" strobes, rear
facing, includes center mounted power
supply, optional color filters available for use
w/clear outer domes
CU64SA four upper 6" x 4" strobes, 2 front/2
rear, includes center mounted power supply,
optional color filters available for use w/clear
outer domes
CCF64S* color filter for 6" x 4" strobe
C64WL two 6" x 4" rear halogen work lights
(60” bar minimum, center mounted)
CDBTTLED two built-in duplex LED
brake/tail/turn, red filter
CCRUISE two built-in cruise lights
XT100 Cobra® Safety Alert® warning radar
transmitter
XT100WIR lightbar prewired for Cobra’s
XT100 radar transmitter (includes cable &
bracket)
OPTICENT Centurion™ lightbar pre-wired for
3M model 792H Opticom (includes cable &
bracket only)
792H self contained emitter with black/gray
painted lighthead.
TACD06A built-in duplex Traffic Advisor, 6
lights
TACD08A built-in duplex Traffic Advisor, 8
lights
CROTFIL* 180° color half-cylinder filter kit
for rotator
CCF*IN color filter for rotator, installed
CICCLEDR five duplex LED ICC lights, red
CICCLEDA five duplex LED ICC lights, amber
SP123C 100 watt speaker center mounted
(requires dome set with center speaker grille)
OPTIONAL KITS FOR CENTURION™
LIGHTBAR SERIES
(CUSTOMER INSTALLED, NOT ALL OPTIONS
AVAILABLE IN ALL MODELS)
KDALY two twin duplex alley lights, clear filter
K360I** two 22 watt 360° inboard strobe
beacons kit, 30° mirrors
KDTD2 two twin duplex take-down lights,
clear filter
KDTD2C one twin duplex take-down light,
center mounted, clear filter
KDCRLED one twin duplex California steady
red LED identification light
KDCRL one twin duplex California steady red
identification light, red filter
KDCBL one twin duplex California steady
blue identification light, blue filter
KDFF** two twin duplex front flashers, electronic flasher, includes filter color of choice
KDRF** two twin duplex rear flashers, electronic flasher, includes filter color of choice
KSEMF substitute an electro-mechanical
KL14SF two lower level outboard/intersector™ 14 Series strobes kit, front facing,
includes 20 watt power supply, clear only
KL17S** two lower level outboard 17 Series
strobes kit, includes 20 watt power supply
KCU64SA four 6"x4" linear strobe kit,
includes 90 watt strobe power supply
KCU64SF two 6"x4" linear strobe kit,
includes 90 watt strobe power supply
K64WL two 6"x4" rear halogen work lights
(60” bar minimum, center mounted)
KDBTTLED two duplex LED brake/tail/turn,
red filter
KCRUISE two built-in cruise lights
KROTFIL* 180° color half-cylinder filter kit
for rotator
KCF* color filter for rotator
* Replace symbol in model number with letter
indicating lens color or LED color desired:
A=Amber, B=Blue, C=Clear/White,
R=Red, G=Green
KHSROTAC one high speed center rotator
kit, 175 FPM with 2 “V” mirrors
KHSROTAI two high speed inboard rotators
kit, 175 FPM with 2 “V” mirrors
KROTAC one center rotator with two “V”
mirrors
KROTA2 two inboard rotators with four “V”
mirrors
Whelen Products are
in the U.S.A.
12
CenCom ™ Siren
THE SMARTEST SIREN AND LIGHT
CONTROL SYSTEM lets you control
your lights , traffic arrow and siren
functions from a single keypad.
A single combination Amplifier/Relay
Module (ARM) provides ease of access
to fuses and connectors without removing the cover. Heavy-duty Anderson® type Power Connectors are designed to
handle rough treatment without damage
or disengaging accidentally.
System operates one or two 100-watt
speakers. The CenCom features a programmable system with a control head
that includes four-position slide switch
(one 40 amp and two 20 amp outputs)
and eighteen backlighted push buttons
with bright red LED on/off indicators.
State-of-the-art membrane switches
provide tactile feedback of activation
and are equipped with a solid rubber
overlay for moisture resistance. The top
row of eight siren control switches
include standard siren tones and “Hand
Free” operation, a Whelen exclusive.
The second row contains Traffic
Advisor® direction and flash pattern
control, low power and two auxiliary
circuits. The third row of five switches
are rated for 10 amps each. Each of
these switches and the two auxiliary
switches are programmable through the
ARM for On/Off, Momentary, 8 Second
Timer or Double-Tap Security 8 Second
Timer. Uni-directional microphone with
plug-in connector is standard. 20’
microphone extension cable is optional.
■ Control your lights, traffic arrow
and siren functions from a single keypad.
■ Easy to configure with Windows®
style programming.
■ Easy to operate, includes hands
free light and siren operation.
■ A USB port in Amplifier/Relay
Module (ARM) provides easy access for
programming. (Control head does not
need to be connected for programming).
■ Bright red LED indicators are clearly
visible, even in bright sun.
■ On/Off, Momentary, Eight-second
timer and Security Double-Tap eightsecond timer can be programmed
through seven switches, individually.
■ Control Panel can be easily surface
mounted via Velcro® or U bracket, standard. Semi-flush mounting trim plate,
optional.
■ Backlighted push buttons include
136 standard function labels to choose
from.
■ Aluminum housed Amplifier/Relay
Module is field-serviceable with easy to
access external fuses.
■ Operates one or two 100-watt
speakers.
■ Single 8-conductor, 22-gauge cable
connects Control head to
Amplifier/Relay Module (ARM) and
provides heavy-duty service unlike
telephone-style cables.
■ 20’ power and input/output cable
with connectors, standard.
■ Two-year warranty on the system,
Five year warranty on Amplifier.
■ Size: Control Head: 3-1/2” (89mm)
H x 6-7/8” (174mm) W x 1-5/16”
(33mm) D.
Amplifier: 3” (78mm) H x 8-1/4”
(210mm) W x 6-3/4” (171mm) D.
CCSRN: Control head with Amplifier/Relay
Module, Microphone and a 20’ power
input/output cable.
CCSRNTA: CCSRN with built-in Traffic Arrow
Module.
CCMICX20: 20’ Microphone extension cable
option, includes strain relief.
CCTRIM: Trim ring option, for semi-flush
mounting of control head.
Whelen Products are
in the U.S.A.
13
295 Series Siren Amplifiers
In “Hands Free” mode, a 295HF and
295HFS Series siren will be in “standby” mode awaiting instructions. You
can turn the siren On, activate WAIL,
YELP or PIERCER TONES and turn the
unit Off from the horn ring. No more
eyes off the road while fumbling for the
siren controls with one hand!
Model 295HFS Series amplifiers are
microprocessor controlled and rated for
100 or 200 watt output (with the exception of 295HF100, rated @ 100 watts).
Standard features include Radio
Rebroadcast, Public Address, Manual,
Wail, Yelp, Airhorn, and Piercer tones.
PTT (Push To Talk) switch on unidirectional microphone over-rides all siren
functions. All siren functions are backlit
in a soft, non-glare green for ease of
nighttime visibility. Contemporary
styling complements most Whelen
power controls and Traffic Advisor
Control Consoles for proper aesthetic
stacking. An adjustable bail bracket
allows mounting in a variety of
positions. Each model is mounted on a
slide out chassis with an integral quick
disconnect plug for ease of maintenance
or replacement.
In 295HFS Models, Si-Test® provides a
significant risk management advantage.
Two different real time diagnostic tests
include: Continuous dynamic testing
during normal siren operations and a
unique silent test while in the “Radio”
mode with the “Manual” button
depressed. During either operation, one
or both red LED lamps will extinguish
instantly upon sensing a siren or
speaker(s) malfunction. Si-Test®
instantly assures you of proper warning
capability and two speaker operation for
high risk situations. It also eliminates
the need for annoying siren “blasts”
during vehicle inspections or shift
changes. Only Whelen offers this
“silent” testing, day or night.
■ Siren 295HFS Series Features six
functions, plus radio repeat and public
address.
■ “Hands Free” operation. Turn
On/Off and access all three siren tones
without removing hands from the steering wheel.
■ Si-Test® silent, self-diagnostic
indicator of siren or speaker failure,
standard on all 295HFS models.
■ Combination On/Off and horn ring
transfer switch.
■ Prewired uni-directional microphone.
■ Adjustable microphone and radio
repeat volume controls.
MODEL 295HF100
MODEL WS2100
100 WATT ELECTRONIC SIREN
■ Economically priced.
■ 100 watt output only.
■ Six function siren plus radio repeat
and public address.
■ Size: 2-1/2” (64mm) H x 6-1/16”
(154mm) W x 6-1/8” (156mm) D.
ELECTRONIC SIREN AMPLIFIER
■ Economically priced.
■ Operates one or two 100 watt Siren
Speakers.
■ Six function siren plus radio repeat
and public address.
■ Size: 2-1/2” (64mm) H x 6-1/16”
(154mm) W x 6-1/8” (156mm) D.
Keep both hands on the
wheel, both eyes on the road,
and you’re still in full control
of emergency warning with
Whelen Electronic Sirens.
■ 295HFSA1 has a “park-kill” feature,
which disables the siren when the
vehicle is in park.
■ 295HFSA5/6 has “park-kill” plus
a time-out relay for shotgun lock, truck
lock, etc.
■ Adjustable intensity backlighting in
soft LED non-glare green, bulb used on
295HF100.
■ Solid State over/under voltage
shutdown and output short circuit
protection.
■ Input polarity protection.
■ External spade-type fuse.
■ Adjustable bail bracket allows
mounting of unit in a variety of positions.
■ Activate siren tones via “Aux. Enable”
input (slide switch, power controls, or
relay-to-ground connection).
■ Locking quick disconnect plug for
ease of service or replacement.
■ Selectable 100 or 200 watt output,
standard on HFS Series. (100 watt only
on Model 295HF100.)
■ Meets/exceeds Class A requirements
of SAE, AMECA, KKK1822 and
California Title XIII specifications.
MODEL 295HFSA1
ELECTRONIC SIREN AMPLIFIER
■ Park Kill feature, disables the siren
when the vehicle is in park.
■ Volume control knob on faceplate
standard.
standard.
■ Si-Test®, silent self-diagnostic.
■ 5 year warranty on amplifier.
■ Size: 2-1/2” (64mm) H x 6”
(152mm) W x 6-7/8” (175mm) D.
Whelen Products are
in the U.S.A.
14
295 Series Siren Amplifiers
MODELS 295HFSA5 &
295HFSA6
MODEL 295HFS2
ELECTRONIC REMOTE SIREN
AMPLIFIER
■ Flush Mount control head.
■ Selectable 100 or 200 watt output.
■ SI-TEST®, silent self-diagnostic test.
■ Interconnection between control
head and remote amplifier is via three
small, #18 gauge wires. All other
connections are to the remote
amplifier 12-pin plug.
■ Size: Control Head: 2-7/8” (73mm) H
x 6-1/4” (159mm) W x 2-3/8” (60mm) D.
Amplifier: 2-3/8” (60mm) H x 6”
(152mm) W x 7” (178mm) D.
OPTION
MODEL 295HFSDA: Second amplifier
kit for Dual Siren Amplifier use.
MODEL 295HFS3
ELECTRONIC REMOTE SIREN AMPLIFIER
■ Surface or under-dash mount
control head.
■ Selectable 100 or 200 watt output is
standard.
head and remote amplifier is via three
connections are to the remote amplifier
12-pin plug.
■ Size: Control Head: 2” (51mm) H x
6” (152mm) W x 2-3/8” (60mm) D.
(152mm) W x 7” (178mm) D.
OPTION
MODEL 295HFSDA: Second amplifier kit for
Dual Siren Amplifier use.
ELECTRONIC SIRENS WITH 9-SWITCH
LIGHT CONTROL
■ Park Kill Feature disables the siren
tone when the vehicle is in park.
■ Timed Out Relay for shotgun lock,
MODEL 295HFS4
trunk lock, etc.
ELECTRONIC REMOTE SIREN AMPLIFIER ■ Six function siren plus radio repeat
■ Surface or under-dash mount
and public address.
control head.
■ Selectable 100 or 200 watt output.
■ Directly compatible with Whelen
■ Four position slide switch and five
“LC” Low Current Series Lightbars.
push-on/push-off switches and one
■ Compatible with other lightbars and momentary switch.
warning devices via a solid state switch■ Push-button switches control secing module or relays.
ondary functions.
■ Each slide switch position has difstandard.
ferent colored LED “On” indicator.
■ Six function siren plus radio repeat ■ Push button switches have a
and public address.
green/red LED indicator for operating
■ Four position slide switch and five
status display.
push-on/push-off switches and one
■ Choice of 36 press-on legend tabs.
momentary switch.
■ Slide switch controls three separate ■ 5 year warranty on amplifier.
primary warning light functions and can ■ Model 295HFSA5 features low curbe wired to turn on siren in “full pursuit” rent switching: a four-position, three
mode.
function slide switch which controls
■ Push-button switches control
three separate primary warning light
secondary functions.
functions and can be wired to turn on
■ Each slide switch position and
siren in “full pursuit” mode, plus five
push button switch has a colored LED
push-on/push-off switches and a proindicator for operating status display.
grammable switch with four choices
■ Push button switches have a
(momentary, 8 second timer, latchgreen/red LED indicator for operating
on/latch-off or flasher mode). LED "On"
status.
indicator.
■ Choice of 36 press-on legend tabs. ■ Model 295HFSA6 has the same
■ SI-TEST®, silent self-diagnostic test. switch configuration but the slide switch
and push buttons control nine state-ofhead and remote amplifier is via three
the-art, internal high-current solid state
drivers. Each of the 6 push buttons
connections are to the remote amplifier
activate one 10 amp output. Slide switch
12-pin plug.
activates a 20 amp circuit, and can be
wired, via a dipswitch to control a 3
■ Size: Control Head: 3-3/8” (86mm) H position program pattern. The 6th
x 6” (152mm) W x 2-3/8” (60mm) D.
position push button may be dipswitch
set for momentary, 8 second timer,
(152mm) W x 7” (178mm) D.
latch-on/latch-off, or flasher modes.
OPTION
Most high current applications such as
MODEL 295HFSDA: Second amplifier kit for
strobe power supplies, headlight and
Dual Siren Amplifier use.
brakelight flashers can be controlled by
the 295HFSA6.
■ Size: Control Head: 3-5/16” (84mm)
H x 6” (152mm) W x 8-3/8” (213mm) D.
MODEL 295HFSA5: Low current
switching
MODEL 295HFSA6: Standard current
switching
Whelen Products are
in the U.S.A.
15
Siren Amplifiers
Economical and waterproof sirens
are perfect for volunteer fire
personnel, security, escort,
undercover vehicles, motorcycles
and marine use.
PAP112
(shown with optional
microphone
extension cable)
BETA1
PAH112 and PAP112
■ Delivers 100 watts of power to a
100-watt siren speaker (purchased
separately).
■ Housing mounts in trunk, under the
seat or other remote location.
PAH112: Power Airhorn 100 watt amplifier,
(electronic amplifier only), 12.8 VDC.
Size: 2-1/2" (64mm) H x 5-7/8" (149mm) W
x 6-3/4" (171mm) D.
PAP112: Power Airhorn plus 100 watt
amplifier with public address and
microphone, 12.8 VDC.
Size: 2-1/2" (64mm) H x 5-7/8" (149mm) W
x 6-3/4" (171mm) D.
PAPEXT15: Optional 15’ extension cable for
PAP112 microphone.
ALPHA12S
ALPHA12R
ALPHA SWITCHES
ALPHA SERIES
■ Economical, four tone, 100 watt
siren. For applications not requiring
public address or radio repeat.
■ Self-contained and remote amplifier
models.
■ Meets Class A requirements with
most 100 Watt speakers.
■ HANDS-FREE operation.
■ Dip switches on rear of amplifier
allow easy set-up and configuration to
most local requirements without special
ordering.
■ Optional switch panels
or customer supplied switching may be
used with ALPHA12R.
WPA1
BETA2
WPA2
WPA112
WPA512
BETA112R
BETA SERIES
■ Economical, four tone, 100 watt
remote siren amplifier with Radio
Repeat and Public Address.
■ HANDS-FREE operation.
■ Meets Class A requirements with
most 100 watt speakers.
■ PA over-ride in all functions.
■ Use with compact BETA1 and
BETA2 Control Heads or customer supplied switching.
■ Dip switches on rear of amplifier
allow easy set-up and configuration to
most local requirements without special
ordering.
BETA112R: Remote 12 VDC siren amplifier
with PA and Radio Repeat. Size: 2-3/8"
(60mm) H x 7-1/8" (181mm) W x 5-1/2"
(140mm) D.
BETA1: Control Head with noise canceling
microphone. 15' cable. Size: 2" (51mm) H x
4-1/2" (114mm) W x 2-1/2" (64mm) D.
BETA2: Fully encapsulated control head is
moisture resistant. Sealed toggle
and rotary switches. Removable noise canceling microphone. 20' cable and
connectors. Size: 1-3/4" (44mm) H x 4-1/4"
(108mm) W x 2" (51mm) D.
BETA2BKT: Optional flush mounting bracket
for BETA2 and WPA1 Series Control Heads.
ALPHA12S: Self-contained 12 VDC siren.
Size: 2-1/2" (64mm) H x
6" (152mm) W x 4-5/8" (117mm) D.
ALPHA12R: Remote 12 VDC siren amplifier.
Requires separate
switches, sold separately.
Size: 2-3/8" (60mm) H x 7-1/8" (181mm) W x
4" (102mm) D.
ALPHA 1,2,3, 4 & 5: Optional switches for
ALPHA12R.
WPA SERIES
■ Water-resistant Siren Amplifiers
and Control Heads for motorcycle and
marine use.
■ Four Tone Siren plus Public
Address and Radio Repeat.
■ 58 watt and 100 watt models.
■ HANDS-FREE operation. WPA
Series amplifiers work with WPA Series
Control Heads or customer supplied
controls.
■ Fully encapsulated, Control Heads
feature sealed toggle and rotary switches and removable Noise Canceling
Microphone.
WPA112: 100 watt, 12 VDC, Remote
Amplifier. Weathertight, extruded
aluminum housing for rugged environment.
Size: 2-7/8" (73mm) H x 3-1/2" (89mm) W x
7-7/8" (200mm) D.
WPA512: 58 watt, 12 VDC, Remote
Amplifier is same size and construction as
WPA112.
WPA1: Control Head with three position
toggle switch enables control for siren only
functions or combined light and siren operation. Includes handlebar mounting bracket,
7-1/2’ cable and connectors. Size: 1-3/4"
(44mm) H x 4-1/4" (108mm) H x 2” (51mm) D.
WPA2: Control Head with flush mounting
bracket, 20’ cable and connectors.
Size: Cutout: 1-3/4" (44mm) H x 4-1/4"
(108mm) W. Bracket: 2-1/2" (64mm) H x
5-1/4" (133mm) W. Protrusion: 3/4"
(19mm) Recess: 4-1/4" (108mm).
HANDLEBAR MOUNT
Whelen Products are
in the U.S.A.
16
Speakers
100 watt high efficiency speakers
for underhood, bumper and lightbars cover you with high impact
sound at all levels. 3 year warranty
on speaker drivers.
SP123C
SA314P
Designed for use with Centurion™ Series
Lightbars. 100 watt speaker is center
mounted.
SA314A
SA314A, SA314B, SA314P
Projector Series high performance,
multi-port 100 watt speaker puts high
performance traffic clearing warning
sound where it counts: down and in
front of your vehicle. Properly installed
away from your vehicle's interior, this
speaker complies with OSHA 1910.95
guidelines regarding "Permissible Noise
Exposure." Narrow, non-corrosive
aluminum or nylon composite housing
provides ease of mounting.
Installs to vehicle’s cross member in
minutes. All models exceed CA Title
XIII, Class A and SAE J1849 requirements. Available in cast aluminum natural finish or black epoxy coated finish
and black nylon/composite. Options
include Universal mounting bracket or
brackets for Ford Crown Victoria,
Explorer and Excursion; Chevy models
Impala, Suburban, Tahoe, Blazer and
Avalanche plus Dodge Intrepid and
BMW motorcycle. Refer to current price
list for details.
Size: 6-3/16” (156mm) H x 6-7/16”
(163mm) W x 3-1/2” (80mm) D.
SA314A: Natural cast aluminum housing.
SA314B: Aluminum, black epoxy coated.
SA314P: Black nylon/composite.
SA340TS
100 watt high efficiency RMS plastic
rectangular speaker horn.
Size: 5” (127mm) H x 8” (203mm) W x
7” (178mm) D.
PROJECT A-FLEX®
Model PROJECT is for underhood applications. Flexible 60” acoustical tube
allows the speaker driver to be mounted
virtually any distance from the horn.
Complete with 100 watt RMS driver and
mounting kit or available as kit for customer supplied 100 watt driver.
SA340STS
Compact, round aluminum speaker
horn. 100 watt, high efficiency driver.
Size: 5-5/8” (143mm) H x 5-5/8”
(143mm) W x 6-13/16” (173mm) D.
SA40/SA41
Low profile, heavy duty structural polycarbonate housing and field replaceable
100 watt RMS speaker driver. Easily
retrofits to Edge 9M Series Lightbars.
SA40: Lo-Pro™ speaker
SA41: Lo-Pro speaker kit for customer
supplied driver.
Whelen Products are
in the U.S.A.
17
Switch Controls Centers
Reduced size power control switch centers
designed to control all types of lightbar and
emergency signalling functions. Available with
or without relays or high current drivers. Heavy
duty power control centers provide reliable,
heavy duty switching control for all types of
emergency lighting including lightbars, flashers,
power supplies and beacons.
PCCS9P
Low current switch center for use with
Edge® 9M™, Ultra™-LC, Ultra-LED-LC ,
LFL-Patriot™ and LFL-Liberty™ Series
Lightbars. Low profile, all extruded
aluminum housings. Four position
progressive slide switch, five push-on/
push-off switches and a programmable
switch with four choices (momentary,
8 second timer, latch-on/latch-off or
flasher mode). LED "on" indicator.
Back-lighted legend windows. 72
standard press-on legend tabs included.
Adjustable bail brackets.
Size: 2” (51mm) H x 6-1/8” (156mm)
W x 3-5/8: (92mm) D.
PCCHD1 and PCCHD2
PCCHD1: Six heavy-duty 25 amp SPST
circuit breaker switches. LED on/off
indicators. Backlighted legends, 72 legend tabs included.
PCCHD2: Replaces first switch of the
PCCHD1 with a 40 amp circuit for use
as master switch or high current applications.
Sizes: 2-3/8” (60mm) H x 6” (152mm) W
x 5-3/8” (137mm) D.
PCC6R
SWITCH BRACKETS
1SWITCH through 4SWITCH:
One, two, three or four PC switch
brackets available. Choice of illuminated
or non-illuminated switches.
Specify switch type described below.
PC-1: single pole, single throw, illuminated,
On/Off
PC-2: single pole, single throw, momentary On
PC-3: single pole, double throw, illuminated,
On-Off-On
PC-4: single pole, double throw, On-On
PC-5: double pole, double throw, On-Off-On
PC5S: double pole, double throw, for strobeHi/Off/Low
PCCS9R
Connects to most rotating and strobe
lightbars without separately mounted
relay or relay boxes. Low profile, all
extruded aluminum housings. Nine
switch functions with programmable
slide lever for three primary warning
controls. LED “on” indicator. “Six push
button switches for secondary functions
(5 On/Off and 1 momentary). Back
lighted legend windows. 72 standard
press-on legend tabs included.
Adjustable bail bracket.
PCC10
PCC6R and PCC10
Six or ten lighted SPST switches rated
20 amps peak. Back-lighted legend
tabs, 72 standard legend tabs included.
Spare momentary style switch
supplied for high/low strobe intensity
control. Installation is easy with a rear
mounted "captive" terminal block.
Size: 2-1/2’ (64mm) H x 6” (152mm) W
x 4-3/4” (121mm) D.
PCC6R: Six switches; one 40 amp switch,
five 20 amp switches.
PCC10: Ten 20 amp switches
Whelen Products are
in the U.S.A.
18
ENGINEERING COMPANY, INC.
Route 145, Winthrop Road, Chester, Connecticut 06412
860-526-9504 • Fax 860-526-4078
www.whelen.com
DISTRIBUTED BY:
Whelen Engineering reserves the right to upgrade and improve products without notice.
© 2002 Whelen Engineering Company, Inc.
Printed in the U.S.A.
Code # 11402A - 0902
Whelen Products are
in the U.S.A.

Centurion™ Lightbars

Transcription

Similar documents

Emergency Services Equipment

ZL-PSTL Product Brochure

BRIGHT HEADLIGHTS

SNU Rally at the Fallon Cantaloupe Festival September 2012

Police Lighting Package Utility Interceptor - Strobes-R-Us

Pookoo Industrial Co., Ltd.

TD4 X-說明書(o)

Sugarcult Lights Out

S4•S6•100 - LLTek Home Page