2 - Diamond Products

Transcription

Call: 1-800-321-5336
HOW TO PLACE ORDERS
FAX: 1-800-634-4035
Our Customer Service Representative Will Need:
· Company name and billing address · Shipping address, if different · Your Purchase Order No. and/or name
· Your Diamond Products Customer No. · Resale, Tax or other special situations · Special Instructions · Email address
· Date Needed
· Product(s) desired:
Example:
Quantity
1 Catalog # Description
12462
4” X .250 1
01789
Standard Gold Dry Tuck Point Blade
M-1 with CB748 Complete Combo Rig
CUSTOMER SERVICE POLICIES
FREIGHT POLICY: Three or more pieces of equipment shipped within the continental U.S. is FOB Factory. Diamond
Tool and Abrasive orders for over $400.00 net are FOB Destination via UPS Ground or truck. Premium shipping (i.e.
2nd day or overnight) is always FOB Factory. Equipment being picked up or shipped from a warehouse is subject to
additional freight charges. Shipments to Puerto Rico have a minimum of $4000 (abrasives), $3000 (diamond tools).
FAST PAY DISCOUNT: A Fast Pay Cash Discount will be allowed when payment is received in Elyria, Ohio within
the terms specified on your invoice.
SALES TAX: Sales tax will be charged where applicable unless a tax exemption certificate is provided.
REPAIRS: Items returned for repair should be carefully packaged and accompanied by a Packing Slip with the
following information:
· (RGA) number obtained from the Returns Dept. or Customer Service Dept.
· Your company name, address, phone and email · List of items for repair · Returned Goods Authorization
· Explanation of repair(s) needed · Original invoice (warranty only)
TRIAL POLICY: Purchase orders are requested and full payment is expected on all trial materials. Trials will be
invoiced on the basis of normal ordering quantity that the customer is expected to purchase if the trial is successful.
Orders must specify the exact number normally purchased and be invoiced on that basis. Trials proving only
partially satisfactory, but usable, will be credited on the basis of the value received. Trials proving completely
unsatisfactory receive full credit. The efficiency of the trial performance is the decision of the customer.
REPLACEMENT/REFUND: All catalog items returned to stock are subject to a 15% restocking fee. Non-catalog items,
special order items and any item beyond two (2) years from original invoice date are subject to a mandatory 50%
restocking fee. Discontinued items and/or items purchased beyond four (4) years from original invoice date cannot
be returned. Items returned for replacement or refund should be in original cartons and must be accompanied by
a packing slip with the following information:
· Returned Goods Authorization (RGA) number obtained from Returns Dept or Customer Service Dept.
· List of items returned · Reason(s) for return(s) · Copy of original invoice(s)
WAREHOUSE LOCATIONS
Main Office - Elyria, Ohio 800-321-5336
1. Cleveland, Ohio - 216-712-6973
2. Lawrence, Massachusetts - 978-683-1566
3. Annapolis Junction, Maryland - 800-342-4750
4. Atlanta, Georgia - 888-472-2930
5. Orlando, Florida - 407-896-1800
6. Franklin Park, Illinois - 847-678-9543
7. Blue Springs, Missouri - 877-990-1385
8. Stafford, Texas - 281-491-0351
9. Mexico City, Mexico - +52 (55) 5696-2451
10. Anaheim, California - 888-779-7292
11. Hayward, California - 510-264-9199
12. Portland, Oregon - 503-232-3480
13. Richmond, BC Canada - 604-241-0500
14. Mississauga, ON Canada - 905-565-1355
15. L’Assomption, PQ Canada - 514-990-2262
16. Denver, Colorado - 303-455-8175
17. Salt Lake City, Utah - 801-972-7056
Call (800) 321-5336
To open your internet account for order status,
shipping information, order confirmation
or net pricing register online at:
www.diamondproducts.com
Diamond Products logos are trademark of Diamond Products Limited. Permission granted to copy pages for business use only.
Wet Asphalt/Green Blades
Page 15-19
Wall Saw/Hand Saw Blades
Page 20-21
Wet Specialty
Blades
Page 22-24
Diamond Wire
Page 25
Floor Grinding Heads, Blocks
and PCD Grinding Products
Page 26
Dry High Speed Blades
Pages 28-29
Ultimate High Speed Blades
Page 30
Specialty High Speed Blades
Cut-ALL and Fiber Board
Page 31
Specialty High Speed Blades
Page 32
Dry Turbo Blades
Page 33-34
Specialty Turbo Blades
Page 35
Tuck Point Blades
Pages 42-43
Cup Grinders
Pages 44-48
Early Entry
Pages 50-51
Tile Blades
Pages 52-53
Small Diameter
Segmented Blades
Page 38-39
Dry Walk Behind
Blades
Pages 54-55
Heavy Duty and Premium
Wet Bits
Page 60-61
Professional
Wet Core Bits
Page 62
Impregnated, Precast and
Turbo Core Bits
Page 64-67
Thinwall Stone and Tile Bits
Page 68
Plated Hole Saw Bits
Page 69
Dry Core Bits
Page 70-71
Carbide, Threaded,
Specialty Core Bits
Page 72-74
Bit Segments and Crowns
Page 78-81
Bit Segments and Crowns
Page 83
Coring Equipment
Star Blue, Utility Green &
Standard Gold Wet Bits
Page 58-59
Sawing Equipment
Dry/Wet Masonry Blades
Page 40-41
Turbo High Performance Blades
Page 36-37
Tyrolit Abrasives
Wet High Performance
Cured Concrete Blades
Page 9-14
Core Bits
Wet Cured Concrete Blades
Page 6-8
Diamond Blades
DIAMOND TOOL PRODUCT TABLE OF CONTENTS
Diamond Blades
TYROLIT ABRASIVES PRODUCT TABLE OF CONTENTS
Abrasives Safety Info
Page 87
Depressed Center Wheels
Pages 88-90
Raised Hub Wheels
Page 91
Super Thin Wheels
Page 92-94
Small Diameter
Page 95
Chop Saw Wheels
Page 95
Cut-Off Wheels
Pages 96
Walk Behind Wheels
Page 96
High Speed Wheels
Page 97-98
Flap Discs
Page 99-100
Resin Fiber Discs
Page 101
Wire Brushes, Cups
& Wheels
Pages 102-103
Blocks, Stones
& Semi-Flex Discs
Page 104
Labels & Markings
Page 105
Coring Equipment
Sawing Equipment
Tyrolit Abrasives
Core Bits
Icon Information
Page 86
Tyrolit Abrasives go through
extensive testing to bring you the
highest quality product.
CC1500E
Basement Saw
Pages 120-121
CC1800XL Saw
Pages 122-125
CC2500 Saw
Pages 126-127
CC3500 Saw
Pages 128-129
CC3700 &
CC3700TE Saw
Pages 130-133
CC4100D
Differential Rear
Pivot
Pages 134-137
CC6500XLS Saws
Pages 138-139
CC7074 Inline &
Transverse Saws
Pages 140-145
CC7100 Saw
Pages 146-147
CC7200 Saw
Pages 148-149
CC7874XL
Easy Rider Saw
Pages 150-151
CC8000
Rider Saw
Pages 152-153
Curb Cutter 2000
Pages 154-155
CC110 Saw
Pages 156-157
Walk Behind Saw
Accessories
Pages 158-159
Mini-Groover
Machines
Pages 160-161
CC1700
Crack Chasing Saws
Pages 162-163
Floor Grinders
Pages 164-165
Polishing
Equipment
Pages 166-169
Core Cut
Wall Saws
Pages 170-171
Wall Saw Guards
Pages 172-173
Hydrostress
Wall Saws
Page 174
Corner Cut Saw and
Hydrostress Guards
Page 175
Hydrostress
Wire Saws
Page 176
Power Units
Pages 182-188
Grooving & Grinding
Pages 189-191
Masonry Saws
Pages 200-203
Block Saws
Pages 204-205
Tile Saws
Pages 206-207
M5 Rig
Pages 220-221
M6 Rig
Pages 222-223
Circular Wire Saw Wire Saw Accessories
Page 177
Page 178
Custom Trucks
Pages 192-193
M1AA-15 Rig
Page 211
U.D.M.
Page 224
Hydraulic Hand Saws
Pages 194-195
WS25 Wire Saw Mobile Track Wire Saw SC3000 Slot Cutter
Page 179
Page 180
Page 181
Fast-Cut SLR Saw
Pages 196-197
Chain Saws
Page 198-199
M1 Rig
Pages 212-213
M2 Rig
Pages 214-215
M3 Rig
Pages 216-217
M4 Rig
Pages 218-219
CB700 Drill Motor
Page 225
Drill Motors
Pages 226-229
Hydraulic Coring
Pages 230-231
Masts & Adapters
Pages 232-233
Coring Accessories Water & Dust Suppression
Pages 234-238
Pages 239-243
Coring Equipment
CC1300XL Saw
Pages 118-119
Sawing Equipment
CC1200 Saw
Pages 116-117
Tyrolit Abrasives
CC150-EE
Early Entry Saw
Page 115
Core Bits
CC1000 and
CC1100XL Saws
Page 114
Diamond Blades
EQUIPMENT PRODUCT TABLE OF CONTENTS
LITERATURE & MERCHANDISING
Master Product Catalog
Tyrolit Abrasives Booklet
Product Binder
Full color catalog of diamond tools
and equipment (with pricing)
(U.S.) Cat # 36569
(Canadian) Cat # 36572
Full color booklet of
Tyrolit Abrasive Products
Cat # 35552
Heavy duty binder that includes the
master product catalog and flyers
Binder Only - Cat # 24816
With US Pricing - Cat # 21988
With Canadian Pricing - Cat # 23234
Saw Poster
Header Signs
A full set of header signs for your
planogram or wall. This includes all
category signs along with quality signs
Cat # 21998
Counter Mat
A durable mat the helps the counter
personnel find the right dry high speed
blade quickly.
Measures 16” x 22”
Cat # 27440
Full color image poster
to dress up your walls
Cat # 31405
Tyrolit Poster
Ask about getting our
literature on a CD!
Full color abrasives poster
to dress up your walls
Cat # 19091
LITERATURE & MERCHANDISING ITEMS
Description
Cat #
Description
Cat #
(U.S. Pricing)
36569
Display Stand
78561
(Canadian Pricing)
36572
Pro Cutter Guide
22005
Tyrolit Booklet
35552
Saw Poster
31405
Full Binder (U.S)
21988
U.S. Parts Prices (CD)
22008
Full Binder (Canada)
23234
Authorized Distributor Sticker
25750
Binder Only
24816
Canadian Parts Prices (CD)
22010
Header Signs
21998
Counter Mat
27440
White Training Booklet
21990
Tyrolit Counter Display
16103
Outdoor Banner 48”x67”
35078
M-1 Rig Display
08017
Indoor Banner 36”x48”
17400
M1AA-15 Rig Display
62219
Metal sign 24” x 26”
35829
Reorder Tag
36178
Extra Display Hooks (12)
84156
Tyrolit Poster
19091
LITERATURE & MERCHANDISING
Product Display Stand
Heavy duty rolling stand that
allows you to display diamond
blades and core bits.
· 2-sided slat wall
· Locking caster wheels
· Literature racks
· Adjustable bit holders
· Allows three 14” blades across
· Includes header and channel signs
Cat # 78561
Extra Hooks (pack of 12)
Cat # 84156
Tyrolit Counter Display
Spinning stand with 24 pegs that
holds 4”, 4-1/2” and 5” wheels
Cat # 16103
Metal Outdoor Sign
Logo Banner
Painted metal sign for outside of your
building for authorized distributors.
Measures: 24” x 36”
Cat # 35829
Enhance your showroom with this vinyl
logo banner with metal grommets (2 sizes)
Outdoor - 48”x67” - Cat # 35078
Indoor - 36” x 48” - Cat # 17400
M1AA-15 Display Stand
M1 Display Stand
The cardboard display
enhances the features of your
M1AA-15 core rig
Cat # 62219
The cardboard display
enhances the features of your
M1 core rig
Cat # 08017
CHECK OUT OUR NEW WEBSITE!
Improved Navigation
Product Search Engine
Updated Images
Technical Downloads
Links to Product videos
and Training
Enhanced Catalog viewer
Links to Our Social Media Outlets
Current Company News
New Product Information
and More
NOT REGISTERED?
visit the website for an online form or call 1-800-321-5336
to register your account to check order status,
shipping information, order confirmation or net pricing
Scan with your smartphone
for our website
SEND US yOUR EMAIL ADDRESS
For the latest product updates, press releases,
promotions and more.
Send to: [email protected]
Diamond Products protects all contact information and will not sell, give or share any consumer
information with outside sources.
Diamond Blades
AGGREGATE MAP for
U.S.A. & Canada
Other types of aggregate can be
found in many parts of the
U.S. and Canada
These are the basic aggregates
found in the shown areas.
Soft Limestone
Sandstone
Dolomite
Limestone
Siliceous
Medium Hard
River Rock
Pit Gravel
Limestone
Dolomite
Decomposed
Granite
Medium Crushed
Gravel
Soft Shell
SOFT
Medium Traprock
MEDIUM SOFT
MEDIUM
2
Granite
Slate
Traprock
Basalt
Quartzite
MEDIUM HARD
Hard Chert
Quartz
Flint Rock
Hard River
Rock
HARD
How A Diamond Blade Works
#2
#1
The exposed diamond crystals do the grinding work. The metal
matrix or bond holds the diamond in place. Trailing behind
each exposed diamond is a bond tail which helps to support the
diamond. As the blade rotates through the material, the exposed
surface diamonds grind the material being cut.
After several thousand passes through the material, the exposed
diamonds begin to crack and fracture. The matrix holding the
diamonds also begin to wear away.
#4
#3
Eventually the diamond completely breaks apart and its fragments
are swept away with the material it is grinding. When the blade is
cooled with water this material, included with water, produces slurry.
As the old diamonds are fractured and worn away they are
replaced by new diamonds and the process continues until the
segments are worn down to the core.
#1 Rule for Diamond Blades:
Use a Hard Bond to Cut Something Soft and Use a Soft Bond to Cut Something Hard
DIAMOND QUALITY - YOU GET WHAT YOU PAY FOR
LOW QUALITY SYNTHETIC DIAMONDS
Weaker crystals with irregular shape
Shorter life & lower cutting rates
Lower thermal stability
Does not handle steel & hard
aggregates well
• Jagged points that break
causing faster wear & lower
cutting & drilling performance
• Widely used in low priced dry products
•
•
•
•
MEDIUM QUALITY SYNTHETIC DIAMONDS
• Good crystal strength & shape
• Good for sawing & drilling
applications
• Good cutting speed
• Handles moderate steel & hard
aggregate applications
3
HIGH QUALITY SYNTHETIC DIAMONDS
Strongest crystals
Lasts longer
Withstands high temperatures
Octahedral shape for increased
tool life & faster cutting
• High impact strength against
steel & hard aggregate
•
•
•
•
Diamond Blades
DIAMOND INFORMATION
Diamond Blades
WET BLADE INFO
(X) Slant Seg Protection
No extra charge on any blade. Used on cured
concrete, asphalt and green concrete blades
when undercutting conditions are occurring
EXAMPLE BOND: C56SHXM
(R) Radius Protection
Low cost undercut protection for average
undercutting situations.
EXAMPLE BOND: C56STRM
(Q) Insert Protection
Our most popular, maximum wear retardant
protection used in tough undercut conditions
across North America.
Noted with an “I” in the part number.
EXAMPLE BOND: C56PQM
ICONS:
For use on walk
behind saws.
To ensure maximum performance,
water is required to cool these blades
during the cutting process.
For use on wall
or hydraulic
hand saws.
Wet Blade Diamond Depth
By Quality Grade
Quality
Grade
Quality
Code
Diamond
Depth
Segment
Height
Imperial Purple Wet Cured
I
.394
.494
Imperial Purple Asphalt/Green
I
.312
.412
Heavy Duty Orange
H
.250
.350
Premium Black
P
.275
.375
Pro Blue
T
.310
.410
Super Premium Silver
SP
.375
.475
Mega Premium Green
MP
.437
.537
4
Diamond Depth indicates the measurement of
diamonds in a segment. This measurement is
different than the segment height .
Segment height is the total measurement of the
diamond depth plus the backer pad.
A backer pad is the side of the segment that
does not have diamonds in it to ensure a good
weld to the blade core.
Quality Grade - code
HIGH SPEED SPECIFICATION CHART
Quality Level
Cured
Concrete
H8D
H8B
H7S
H8I
H7X
H7H
H7P
H7SH
H7XU
H7HU
H8CAU
H8CA
H8ICA
Quality Code denotes grade Based on quality
not seg height
and color code
1
2
3
4
6
7
8
7
6
7
7
7
4
Delux-Cut (D)
Star Blue (B)
Standard Gold (S)
Imperial Purple (I)
X-tra Plus Red (X)
Heavy Duty Orange (H)
Premium Black (P)
Super Heavy Duty Silver (SH)
X-tra Plus Red Ultimate (XU)
Heavy Duty Orange Ultimate (HU)
Cut-ALL Ultimate (H8CAU)
Cut-ALL (CA)
Imperial Purple Cut-ALL (ICA)
General
Purpose
H8D
H8B
H8S
H8I
H8X
H8H
H8P
H8SH
H8XU
H8HU
H8CAU
H8CA
H8ICA
Material Being Cut
Green
Concrete
H10D
H10B
H10S
H10I
H10X
H10H
H10P
H10SH
H10XU
H10HU
-H8CA
H8ICA
TURBO BLADE SPECIFICATION CHART
Quality Level
Quality Code denotes grade and color
code
Based on quality not
seg height
1
2
3
4
7
8
3
7
8
8
2
4
3
Delux-Cut (D)
Star Blue (B)
Standard Gold (S)
Imperial Purple (I)
Premium Black (P)
High Performance Standard Gold (S)
High Performance Heavy Duty Orange (H)
High Performance Premium Black (P)
T-Seg Premium Turbo (P)
Shock Wave Blue (B)
Shock Wave White (W)
XL-Turbo (XL)
Hard Materials,
Concrete
--T7S
T7I
T7H
T7P
HPT7S
HPT7H
HPT7P
TS7P
T7SWB
T7SWW
T7XL
Asphalt
H10D
H10B
H10S
H10I
H10X
H10H
H10P
H10SH
H10XU
H10HU
-H8CA
H8ICA
Brick
& Block
H10D
H10B
H10S
H10I
H10X
H10H
H10P
H10SH
H10XU
H10HU
-H8CA
H8ICA
Material Being Cut
General Purpose
T7D
T7B
T7S
T7I
T7H
T7P
HPT7S
HPT7H
HPT7P
TS7P
T7SWB
T7SWW
T7XL
Soft Materials,
Asphalt/Block
--T7S
-T7H
T7P
HPT7S
HPT7H
HPT7P
TS7P
T7SWB
T7SWW
T7XL
SMALL DIAMETER BLADE SPECIFICATION CHART
Quality Level
Quality Code denotes grade and color code
Based on quality not seg
height
1
2
3
6
7
8
Delux-Cut (D)
Star Blue (B)
Standard Gold (S)
X-tra Plus Red (X)
Premium Black (P)
Material Being Cut
Concrete,
Soft Materials,
General Purpose
Asphalt/Block
E2D
E2D
E2B
E2B
E2S
E5S
E2X
E5X
E2H
E5H
E2P
E5P
MASONRY BLADE SPECIFICATION CHART
Quality Level
Quality Code denotes grade
and color code
Based on quality
not seg height
Hard Material,
Hard Brick
General Purpose
Combo Brick/Block
Combo Brick/
Block
Abrasive Brick/
Block
1
2
3
7
8
--DM80S
DM80H
DM80P
DM85D
DM85B
DM85S
DM85H
DM85P
DM85D
DM85B
DM86S
DM86H
DM86P
--DM87S
DM87H
DM87H
Delux-Cut (D)
Star Blue (B)
Standard Gold (S)
Premium Black (P)
Material Being Cut
5
Diamond Blades
DRY BLADE SPECIFICATION CHARTS
Diamond Blades
DiamonD BlaDes
imPeRial WeT CUReD ConCReTe BlaDes
For Cost efficient Cutting
imPeRial PURPle
WeT CUReD BlaDes 14”-36”
imperial Purple - i
.394” Diamond Depth
• Economical blades that work well for
contractors who don’t have a heavy
volume of cutting to do.
SIZE
PART #
CAT #
14” x .125
16” x .125
18” x .125
20” x .140
20” x .187
24” x .155
26” x .155
26” x .187
30” x .155
30” x .187
36” x .187
CI14125M
CI16125M
CI18125M
CI20140M
CI20187M
CI24155M
CI26155M
CI26187M
CI30155M
CI30187M
CI36187M
36800
36808
36809
36811
37037
36814
36815
37039
36817
36818
36834
LIST
PRICE
$559
642
719
879
1,009
1,228
1,403
1,511
1,474
1,650
1,939
NOTE: 24” and larger come with Slant (x) Segment.
• Delivers the speed and convenience
of a diamond blade compared with
conventional abrasive blades that require
frequent blade changes.
• Basic quality diamond and economical
cutting value.
1” arbor with drive pin hole standard.
water is required to cool these blades
For use on walk
behind saws.
aGGReGaTe HaRDness
meDiUm aGGReGaTe
imperial Purple specifications for light to medium
Reinforced Concrete
C2650i
6
HeaVY DUTY oRanGe
HeaVY DUTY oRanGe
SIZE
LIST PRICE
WITH ‘X’ SLANT
or NO WEAR
PROTECTION
SIZE
LIST PRICE
WITH ‘X’ SLANT
or NO WEAR
PROTECTION
LIST PRICE
WITH ‘Q’
INSERTS
10” X .110
$418
24” X .140
$1,301
$1,455
10” X .125
452
24” X .155
1,384
1,545
12” X .110
475
$548
24” X .165
1,440
1,607
12” X .125
515
597
24” X .175
1,498
1,670
12” X .140
561
24” X .187
1,559
1,738
12” X .155
623
24” X .210
1,780
12” X .187
730
823
24” X .250
2,002
12” X .250
900
1,055
25” X .155
1,461
12” X .375
1,294
26” X .155
1,523
1,719
14” X .110
580
652
26” X .165
1,583
1,788
14” X .125
637
712
26” X .175
1,645
1,855
14” X .140
697
777
26” X .187
1,749
1,965
14” X .155
752
26” X .250
2,132
LIST PRICE
WITH ‘Q’
INSERTS
2,205
14” X .187
886
974
28” X .187
1,864
2,058
14” X .250
1,096
1,199
30” X .175
1,792
1,948
14” X .375
1,583
1,714
30” X .187
1,863
2,023
16” X .125
745
818
30” X .210
2,006
16” X .140
802
880
30” X .250
2,395
16” X .155
859
32” X .175
1,853
16” X .187
1,012
32” X .187
1,922
16” X .250
1,239
32” X .210
2,099
18” X .125
834
923
32” X .250
2,563
18” X .140
912
1,005
36” X .175
2,165
2,363
18” X .155
1,018
1,133
36” X .187
2,240
2,439
18” X .165
1,117
36” X .210
2,516
18” X .175
1,162
1,262
36” X .250
2,847
18” X .187
1,191
1,344
42” X .187
3,337
18” X .210
1,221
1,362
42” X .210
3,506
18” X .250
1,420
42” X .220
3,577
20” X .125
926
1,063
48” X .210
3,966
20” X .140
997
1,140
48” X .250
4,785
20” X .155
1,164
1,261
54” X .220
5,061
20” X .187
1,251
60” X .220
5,651
20” X .250
1,565
See page 2 for color
coded aggregate listings.
2,580
Heavy Duty orange - H
2,087
• Fast cutting blade that works
well with a wide variety of high
or low HP saws.
• Combines long life performance
while maximizing your blade
dollars.
3,078
To ensure maximum
performance, water is
required to cool these
blades during the cutting
process.
4,793
Custom arbor sizes/types are available.
When ordering, please specify arbor size/type if
different from 1”.
* Additional blade sizes available upon request.
aGGReGaTe HaRDness
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
H.D. oRanGe specifications for light to medium Reinforced Concrete
C62H
C60H
C56H
C52H
C51WH
H.D. oRanGe specifications for Heavily Reinforced Concrete
C56H
C56H
C52H
C51WH
C50H
7
For use on walk
behind saws.
If you need a price for something
not shown, please call customer service
at (800) 321-5336.
Most wet concrete blades are silver
brazed. Any blade can be laser welded
upon request.
DiamonD BlaDes
HeaVY DUTY WeT CUReD ConCReTe BlaDes
DiamonD BlaDes
PRemiUm BlaCK WeT CUReD ConCReTe BlaDes
PRemiUm BlaCK
Premium
Black - P
• A high quality blade
that delivers long
lasting, fast cutting
performance.
• Designed for contractors
who demand maximum
efficiency and value.
To ensure maximum
required to cool these
blades during the
cutting process.
For use on walk
behind saws.
PRmeiUm BlaCK
SIZE
LIST PRICE
WITH ‘X’
SLANT or NO
WEAR
PROTECTION
10” X .110
$515
24” X .140
$1,565
$1,606
$1,928
10” X .125
562
24” X .155
1,675
1,715
2,056
12” X .110
589
24” X .165
1,746
1,836
2,139
LIST
PRICE
WITH ‘R’
RADIUS
LIST
PRICE
WITH ‘Q’
INSERTS
SIZE
LIST PRICE
WITH ‘X’
SLANT or NO
WEAR
PROTECTION
LIST
PRICE
WITH ‘R’
RADIUS
LIST
PRICE
WITH ‘Q’
INSERTS
12” X .125
649
24” X .175
1,821
1,866
2,226
12” X .140
700
24” X .187
1,904
1,950
2,323
12” X .155
780
24” X .210
2,170
12” X .187
854
24” X .250
2,459
2,598
2,946
12” X .250
1,130
25” X .155
1,764
1,804
2,165
12” X .375
1,644
1,960
26” X .155
1,842
1,879
2,257
14” X .110
722
885
26” X .165
1,920
1,958
2,349
14” X .125
796
834
968
26” X .175
2,003
2,090
2,445
14” X .140
876
914
1,054
26” X .187
2,130
2,169
2,585
14” X .155
946
1,131
26” X .250
2,631
14” X .187
1,109
1,178
1,315
28” X .187
2,262
14” X .250
1,392
1,511
1,633
30” X .175
2,162
2,211
2,612
14” X .375
2,020
2,330
30” X .187
2,255
2,306
2,721
16” X .125
923
961
1,095
30” X .210
2,443
2,498
2,940
16” X .140
1,001
1,038
1,180
30” X .250
16” X .155
2,914
3,458
1,078
1,263
32” X .175
16” X .187
1,267
2,253
2,634
32” X .187
16” X .250
1,571
2,347
18” X .125
1,016
1,049
1,216
32” X .250
3,129
18” X .140
1,113
1,147
1,324
36” X .175
2,608
2,635
3,023
18” X .155
1,241
1,276
1,461
36” X .187
2,713
2,740
3,139
18” X .165
1,359
1,582
36” X .210
3,044
3,077
3,499
18” X .175
1,416
1,651
36” X .250
3,470
18” X .187
1,456
1,645
42” X .187
3,883
3,903
4,328
18” X .210
1,498
1,618
42” X .210
4,109
4,129
4,582
18” X .250
1,759
1,795
2,037
42” X .220
4,205
4,231
4,694
20” X .125
1,126
1,156
1,424
48” X .210
4,527
4,634
4,982
20” X .140
1,220
1,247
1,533
48” X .250
5,454
5,951
20” X .155
1,351
1,380
1,680
54” X .220
5,439
5,951
20” X .187
1,531
1,560
1,889
20” X .250
1,933
$687
$822
1,304
aGGReGaTe HaRDness
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
PRem BlaCK specifications for light to medium Reinforced Concrete
C62P
C60P
C56P
C52P
C51WP
PRem BlaCK specifications for Heavily Reinforced Concrete
C56P
C56P
C52P
C51WP
C50P
8
2,610
3,166
2,740
2,332
2,741
3,589
3,972
60” X .220
7,281
7,773
at (800) 321-5336.
upon request.
HiGH PeRFoRmanCe
PRo BlUe
SIZE
PRo BlUe
LIST
LIST PRICE
LIST PRICE
PRICE
WITH ‘X’ SLANT
WITH ‘R’
WITH ‘Q’
or NO WEAR
RADIUS
INSERTS
PROTECTION
SIZE
LIST PRICE WITH
LIST PRICE LIST PRICE
‘X’ SLANT or NO
WITH ‘R’ WITH ‘Q’
WEAR
RADIUS INSERTS
PROTECTION
10” X .110
$546
24” X .140
$1,756
$1,795
$2,131
10” X .125
595
24” X .155
1,881
1,921
2,276
12” X .110
624
24” X .165
1,967
2,009
2,374
12” X .125
688
24” X .175
2,053
2,095
2,469
12” X .140
749
24” X .187
2,148
2,193
2,581
12” X .155
829
24” X .210
2,446
2,490
12” X .187
970
1,172
24” X .250
2,782
12” X .250
1,207
1,438
25” X .155
1,982
2,021
$858
2,904
3,287
2,396
12” X .375
1,762
26” X .155
2,068
2,106
2,501
14” X .110
782
26” X .165
2,163
2,199
2,606
14” X .125
865
$902
1,036
26” X .175
2,255
2,295
2,712
14” X .140
953
991
1,131
26” X .187
2,402
2,441
2,873
14” X .155
1,033
1,071
1,221
26” X .250
2,984
14” X .187
1,210
1,248
1,414
28” X .187
2,456
2,674
3,023
14” X .250
1,523
1,565
1,761
30” X .175
2,426
2,475
2,891
14” X .375
2,219
2,401
2,524
30” X .187
2,535
2,585
3,017
16” X .125
1,001
1,037
1,171
30” X .210
2,755
2,808
3,265
16” X .140
1,091
1,269
30” X .250
3,288
16” X .155
1,173
32” X .175
2,472
16” X .187
1,375
32” X .187
2,581
16” X .250
1,718
1,954
32” X .210
2,797
18” X .125
1,128
1,161
1,333
32” X .250
3,440
18” X .140
1,239
1,273
1,452
36” X .175
2,850
3,096
3,267
18” X .155
1,381
1,413
1,603
36” X .187
2,969
2,994
3,403
18” X .165
1,509
1,536
1,736
36” X .210
3,335
3,355
18” X .175
1,537
1,660
1,806
36” X .250
3,814
3,833
4,316
18” X .187
1,566
1,687
1,901
42” X .187
4,228
4,239
4,681
18” X .210
1,713
1,755
1,976
42” X .210
4,490
4,507
5,378
18” X .250
1,969
2,414
42” X .220
4,602
4,614
5,095
20” X .125
1,252
1,282
1,560
48” X .210
5,132
5,245
5,496
20” X .140
1,361
1,391
1,683
48” X .250
6,178
20” X .155
1,509
1,535
1,846
54” X .220
6,153
6,149
6,698
20” X .187
1,711
1,738
2,078
60” X .220
8,265
20” X .250
2,172
2,248
1,211
Professional
Blue - T
3,848
2,803
2,855
3,114
8,796
•
•
Same high quality
as our Premium
Black blade with
a taller segment to
lower your cutting
costs.
Made for 35HP saws
and larger
To ensure maximum
performance, water
is required to cool
these blades during
the cutting process.
For use on walk
behind saws.
aGGReGaTe HaRDness
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
PRo BlUe specifications for light to medium Reinforced Concrete
C62T
C60T
C56T
C52T
C51WT
PRo BlUe specifications for Heavily Reinforced Concrete
C56T
C56T
C52T
C51WT
C50T
9
at (800) 321-5336.
upon request.
DiamonD BlaDes
PRo BlUe WeT CUReD ConCReTe BlaDes
DiamonD BlaDes
sUPeR PRemiUm silVeR WeT CUReD ConCReTe BlaDes
HiGH PeRFoRmanCe
sUPeR PRemiUm silVeR
SIZE
LIST PRICE
WITH ‘X’
SLANT or NO
WEAR
PROTECTION
10” X .110
$616
10” X .125
676
12” X .110
706
12” X .125
782
$950
12” X .140
855
1,030
12” X .155
948
12” X .187
1,103
12” X .250
1,391
12” X .375
2,032
14” X .110
890
14” X .125
989
14” X .140
super Premium
silver - sP
• A high quality long
life blade.
• Made with high diamond
concentration.
• Especially well suited for
sawing in tough applications.
To ensure maximum
performance, water
is required to cool
these blades during
For use on walk
behind saws.
1,092
LIST
PRICE
WITH ‘R’
RADIUS
$1,280
SIZE
LIST PRICE
WITH ‘X’ SLANT
or NO WEAR
PROTECTION
LIST
PRICE
WITH ‘R’
RADIUS
LIST
PRICE
WITH ‘Q’
INSERTS
24” X .140
$1,983
$2,018
$2,154
24” X .155
2,134
2,172
2,521
24” X .165
2,237
2,274
2,636
24” X .175
2,339
2,375
2,749
24” X .187
2,458
2,494
2,880
24” X .210
2,790
2,826
3,238
24” X .250
3,193
3,293
25” X .155
2,247
2,282
2,651
26” X .155
2,345
2,379
2,769
26” X .165
2,458
2,490
2,891
26” X .175
2,570
2,601
3,018
1,267
26” X .187
2,737
2,768
3,199
3,434
3,547
3,975
LIST
PRICE
WITH ‘Q’
INSERTS
1,303
1,622
1,021
1,126
1,157
14” X .155
1,186
1,221
1,367
26” X .250
14” X .187
1,386
1,420
1,584
28” X .187
2,895
2,937
14” X .250
1,759
1,811
1,988
30” X .175
2,746
2,790
3,202
14” X .375
2,572
30” X .187
2,877
2,920
3,350
16” X .125
1,140
1,171
1,306
30” X .210
3,138
3,189
16” X .140
1,244
1,277
1,417
30” X .250
3,746
16” X .155
1,345
32” X .175
2,815
16” X .187
1,574
1,738
1,767
32” X .187
16” X .250
1,963
2,956
3,071
3,627
18” X .125
1,288
1,313
1,484
36” X .175
3,181
3,194
3,582
18” X .140
1,416
1,444
1,625
36” X .187
3,324
3,340
3,740
18” X .155
1,576
1,605
1,794
36” X .210
3,731
3,818
4,170
18” X .165
1,715
1,742
1,937
36” X .250
4,289
4,301
4,770
18” X .175
1,752
1,779
1,982
42” X .187
4,655
4,842
5,095
18” X .187
1,791
1,817
2,026
42” X .210
4,971
4,831
5,496
18” X .210
1,914
1,983
42” X .220
5,109
5,379
5,590
18” X .250
2,237
2,442
2,647
48” X .210
5,479
5,602
5,940
20” X .125
1,422
1,449
1,724
48” X .250
6,590
6,802
8,835
20” X .140
1,552
1,577
1,866
54” X .220
20” X .155
1,719
1,742
2,047
60” X .220
20” X .187
1,953
1,975
2,308
20” X .250
2,508
2,914
aGGReGaTe HaRDness
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
sP silVeR specifications for light to medium Reinforced Concrete
C62SP
C60SP
C56SP
C52SP
C51WSP
sP silVeR specifications for Heavily Reinforced Concrete
C56SP
C56SP
C52SP
C51WSP
C50SP
10
3,887
4,293
2,925
3,189
7,088
6,919
9,246
at (800) 321-5336.
upon request.
meGa PRemiUm GReen
SIZE
LIST PRICE
WITH ‘X’
SLANT or NO
WEAR
PROTECTION
12” X .110
$756
12” X .125
837
12” X .155
12” X .187
meGa PRemiUm GReen
SIZE
LIST PRICE
WITH ‘X’
SLANT or NO
WEAR
PROTECTION
24” X .140
$2,086
24” X .155
2,247
1,023
24” X .165
2,353
1,246
24” X .175
2,496
12” X .250
1,552
24” X .187
2,697
12” X .375
2,216
24” X .210
3,020
14” X .110
955
14” X .125
1,053
14” X .140
1,181
14” X .155
1,282
14” X .187
1,561
14” X .250
1,963
14” X .375
LIST
PRICE
WITH ‘R’
RADIUS
LIST
PRICE
WITH ‘Q’
INSERTS
$1,113
LIST
PRICE
WITH ‘R’
RADIUS
LIST
PRICE
WITH ‘Q’
INSERTS
$2,282
$2,636
2,968
24” X .250
3,433
1,198
25” X .155
2,401
2,481
2,857
1,357
26” X .155
2,470
2,524
2,919
26” X .165
2,585
2,616
3,030
1,759
26” X .175
2,701
2,727
3,151
2,035
26” X .187
3,019
3,220
3,482
2,855
26” X .250
3,779
16” X .125
1,232
28” X .187
3,148
16” X .140
1,325
30” X .175
2,898
2,937
3,352
16” X .155
1,423
30” X .187
3,027
16” X .187
1,719
30” X .210
3,435
18” X .125
1,394
1,417
1,588
32” X .175
3,024
18” X .140
1,526
1,553
1,733
32” X .250
4,023
18” X .155
1,697
1,912
36” X .175
3,350
3,756
18” X .165
1,778
36” X .187
3,493
4,143
18” X .175
$1,082
1,857
42” X .187
4,818
18” X .187
2,010
42” X .210
5,191
18” X .210
2,197
42” X .220
5,404
18” X .250
2,522
48” X .210
5,425
20” X .125
1,526
1,568
54” X .220
7,081
20” X .140
1,655
1,645
20” X .155
1,822
20” X .187
2,204
20” X .250
2,822
4,088
3,584
mega Premium
Green - mP
•
•
•
Extremely long life
blade especially good for
hard aggregates.
Made with our
highest diamond
concentration.
Delivers the lowest diamond
tool cost per inch foot in the
industry.
To ensure maximum
performance, water
is required to cool
these blades during
For use on walk
behind saws.
aGGReGaTe HaRDness
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
meGa PRem specifications for light to medium Reinforced Concrete
C62MP
C60MP
C56MP
C52MP
C51WMP
meGa PRem specifications for Heavily Reinforced Concrete
C56MP
C56MP
C52MP
C51WMP
C50MP
11
at (800) 321-5336.
upon request.
DiamonD BlaDes
meGa PRemiUm GReen WeT CUReD ConCReTe BlaDes
DiamonD BlaDes
PRoFessional ConCReTe HiGH GRaDe WeT BlaDes
PRoFessional ConCReTe HiGH GRaDe - 10” - 20”
Pro Plus
(T+)
.310 Diamond
Depth
Super Heavy
Duty (SH)
.375 Diamond
Depth
Super Premium
Plus (SP+)
.375 Diamond
Depth
Super
Supreme (SU)
.375 Diamond
Depth
SIZE
Pro Heavy
Duty (TH)
.310 Diamond
Depth
10” x .110
$467
$637
10” x .125
508
692
12” x .110
531
12” x .125
585
12” x .140
633
12” x .155
699
12” x .187
865
12” x .250
1,066
12” x .375
1,544
2,174
14” x .110
658
921
14” x .125
724
822
1,122
1,018
1,050
14” x .140
797
880
1,228
1,139
1,175
14” x. 155
859
994
1,329
1,238
1,278
14” x .187
1,063
1,509
1,555
14” x .250
1,325
1,891
1,954
14” x .375
1,919
2,746
16” x .125
835
917
1,196
16” x .140
903
1,046
1,285
16” x .155
969
1,123
1,381
1,480
16” x .187
1,198
1,664
1,739
732
$662
808
$834
878
990
$1,325
1,211
16” x .250
1,205
1,241
1,496
1,543
2,130
18” x .125
935
1,034
1,443
1,345
1,386
18” x .140
1,026
1,130
1,576
1,474
1,520
18” x .155
1,144
1,271
1,739
1,642
1,689
18” x .165
1,252
1,851
1,717
1,792
18” x .175
1,305
1,962
1,793
1,850
18” x .187
1,363
1,941
2,002
2,119
2,186
18” x .210
18” x .250
1,694
20” x .125
1,068
1,169
20” x .140
1,154
1,263
20” x .155
1,277
1,398
20” x .187
20” x .250
2,430
1,475
1,520
1,599
1,649
1,760
1,815
1,523
2,130
2,284
1,914
2,696
1,921
Professional Concrete High Grade
Wet Blades are made with very
high quality diamonds and heavy
concentration to give you the longest
life diamond blade.
water is required to cool these
blades during the cutting process.
Professional High & Highest Grade
prices shown above do not include wear
protection segments.
These are custom quality grades. Please
consult the factory or sales for more
information on custom specifications.
12
at (800) 321-5336.
upon request.
PRoFessional ConCReTe HiGHesT GRaDe - 12” - 20”
SIZE
Mega Premium
Plus (MP+)
.437 Diamond
Depth
Mega
Supreme (MU)
.437 Diamond
Depth
12” x .110
$782
$804
Giga Premium
(GP)
.500 Diamond
Depth
Giga Supreme
(GU)
.500 Diamond
Depth
$858
12” x .125
865
887
12” x .187
1,290
1,330
1,419
12” x .250
1,609
12” x .375
2,345
14” x .110
988
1,016
1,086
14” x .125
1,091
1,124
14” x .140
1,222
1,280
1,313
14” x .155
1,467
1,330
1,369
14” x .187
1,617
1,572
14” x .250
2,035
14” x .375
2,966
16” x .125
1,278
1,313
16” x .140
1,373
1,417
16” x .155
1,558
16” x .187
1,788
$895
$1,161
$1,668
953
1,203
1,785
2,131
1,798
1,402
$1,416
$1,526
1,687
$1,806
2,098
18” x .125
1,439
1,476
$1,480
1,582
18” x .140
1,579
1,613
$1,626
1,739
18” x .155
1,757
1,810
$1,840
1,933
18” x .165
1,841
1,987
$1,912
2,028
18” x .175
1,924
1,956
$1,984
2,125
18” x .187
2,081
2,087
$2,144
2,295
18” x .210
2,276
2,335
18” x .250
2,573
2,525
20” x .125
1,577
1,526
$1,624
1,735
20” x .140
1,714
1,733
$1,766
1,891
20” x .155
1,887
1,947
$2,003
2,083
20” x .187
2,410
2,519
$2,635
2,820
20” x .250
2,927
Our metallurgy engineers can
design custom bonds to solve
any application you may have.
Professional High & Highest Grade
prices shown above do not include wear
protection segments.
13
at (800) 321-5336.
upon request.
DiamonD BlaDes
PRoFessional ConCReTe HiGHesT GRaDe WeT BlaDes
DiamonD BlaDes
PRoFessional ConCReTe HiGH GRaDe WeT BlaDes
PRoFessional ConCReTe HiGH GRaDe - 24” - 42”
Pro Plus
(T+)
.310 Diamond
Depth
Super Premium
Plus (SP+)
.375 Diamond
Depth
1,778
$2,423
$2,521
1,833
2,532
2,636
SIZE
Pro Heavy
Duty (TH)
.310 Diamond
Depth
Super Heavy
Duty (SH)
.375 Diamond
Depth
24” x .140
$1,487
$1,625
24” x .155
1,588
24” x .165
1,655
24” x .175
1,724
1,887
24” x .187
1,799
1,971
25” x .155
1,676
26” x .155
1,746
26” x .165
1,821
26” x .175
1,895
26” x .187
2,015
30” x .175
2,054
30” x .187
2,139
2,787
2,998
2,581
2,685
2,017
2,694
2,787
1,983
2,812
2,913
2,919
3,042
3,186
3,226
2,238
3,241
3,257
32” x .187
3,385
3,276
36” x .175
2,417
36” x .187
2,508
42” x .187
3,839
3,640
2,700
3,722
3,795
4,964
42” x .210
5,573
5,794
PRoFessional ConCReTe HiGHesT GRaDe - 24” - 48”
SIZE
Super
Supreme (SU)
.375 Diamond
Depth
Mega Premium
Plus (MP+)
.437 Diamond
Depth
24” x .155
$2,670
24” x .165
2,793
24” x .175
2,934
24” x .187
3,266
24” x .210
$3,573
25” x .155
2,845
26” x .155
2,950
26” x .165
Mega
Supreme (MU)
.437 Diamond
Depth
2,958
3,089
26” x .175
3,224
26” x .187
3,564
28” x .187
3,435
30” x .175
$3,229
3,478
3,926
Diamond Products uses
only the highest quality
synthetic diamonds on
all wet blades which are
made in the U.s.a.
3,428
30” x .187
3,581
30” x .210
3,929
36” x .175
3,587
To ensure maximum
required to cool these blades
3,857
42” x .187
5,084
42” x .210
5,944
48” x .210
6,291
6,077
14
at (800) 321-5336.
upon request.
imPeRial PURPle
imperial Purple - i
• Delivers the speed and convenience
of a diamond blade compared with
abrasive blades that require frequent
blade changes.
SIZE
PART #
CAT #
LIST PRICE
SLANT
SEG ‘X’
PROTECTION
14” x .140
AI14140XM
36821
$663
18” x .140
AI18140XM
36822
883
20” x .140
AI20140XM
36823
987
24” x .155
AI24155XM
36824
1,282
26” x .165
AI26165XM
36825
1,468
30” x .187
AI30187XM
36828
1,602
36” x .187
AI36187XM
36831
2,007
cutting value
Includes Slant (x) Segment Wear Protection.
To ensure maximum
performance, water is required
to cool these blades during
For use on walk
behind saws.
aGGReGaTe HaRDness
meDiUm aGGReGaTe asPHalT/GReen ConCReTe
imperial Purple specification
a6000i
15
at (800) 321-5336.
upon request.
DiamonD BlaDes
imPeRial PURPle
asPHalT, GReen ConCReTe & asPHalT oVeR ConCReTe
WeT BlaDes
For Cost efficient Cutting
DiamonD BlaDes
HeaVY DUTY oRanGe
asPHalT, GReen ConCReTe
& asPHalT oVeR ConCReTe
WeT BlaDes
HeaVY DUTY oRanGe asPHalT/GReen ConCReTe/asPHalT
oVeR ConCReTe WeT BlaDes 12”-36”
SIZE
LIST PRICE
WITH ‘X’
SLANT
SEGMENT
LIST PRICE
WITH ‘R’
RADIUS
SEGMENT
LIST PRICE
WITH ‘Q’
INSERT
SEGMENTS
12" X .125
$533
$551
$585
12" X .140
611
670
12" X .187
733
803
12" X .250
892
980
12" X .375
1,279
1,401
14" X .125
653
678
699
14" X .140
755
782
805
14" X .187
893
929
958
14" X .250
1,098
1,144
1,179
14" X .375
1,586
16" X .125
757
16" X .140
863
18" X .125
856
1,681
782
838
885
941
950
18" X .140
984
1,017
1,077
18" X .155
1,088
1,124
1,187
18" X .187
1,160
1,195
1,276
18" X .175
1,284
18" X .250
1,420
1,450
1,566
20" X .125
942
953
1,044
20" X .140
1,072
1,102
1,180
20" X .155
1,175
1,250
1,289
24" X .155
1,395
1,438
1,518
24" X .175
1,504
1,617
1,707
24" X .187
1,564
1,713
1,801
26" X .155
1,535
26" X .175
1,655
1,713
1,801
26" X .187
1,756
1,817
1,910
Heavy Duty orange - H
• Fast cutting blade that works well with a
wide variety of high or low HP saws.
• Combines long life performance while
maximizing your blade dollars.
1,671
30" X .175
1,687
1,750
1,836
30" X .187
1,750
1,816
1,904
32" X .187
1,923
1,937
36" X .175
2,164
36" X .187
2,238
When ordering, please specify arbor size/type if different from 1”.
For use on walk behind saws.
2,334
2,384
To ensure maximum performance, water is required
to cool these blades during the cutting process.
2,469
See page 2 for color coded aggregate listings.
When determining an Asphalt, Green Concrete or Asphalt over
Concrete specification use this formula:
Blade type A, G or AC, (spec #) (grade) optional wear
protection) M
A = Asphalt, G = Green Concrete, AC = Asphalt over Concrete
Example: A606TRM or AC62SWSPQM
Low HP = 18 HP or lower
High HP = 20 HP or higher
at (800) 321-5336.
Most asphalt, green concrete and asphalt
over concrete blades are silver brazed.
Any blade can be laser welded upon request.
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
H.D. oRanGe Cutting asphalt with low HP saw specifications
A635H
A615H
A606H
A605H
A350H
H.D. oRanGe Cutting asphalt with High HP saw specifications
A665H
A635H
A630H
A606H
A605H
H.D. oRanGe Cutting Green Concrete with low HP saw specifications
G670H
G660H
G606H
G606H
G605H
H.D. oRanGe Cutting Green Concrete with High HP saw specifications
G670H
G660H
G606H
G606H
G605H
H.D. oRanGe Cutting asphalt over Concrete with low HP saw specifications
AC64DWH
AC64DWH
AC64DWH
AC62DWH
AC62DWH
H.D. oRanGe Cutting asphalt over Concrete with High HP saw specifications
AC64DWH
AC64DWH
AC64DWH
AC62DWH
AC62DWH
16
PRemiUm BlaCK asPHalT/GReen ConCReTe/asPHalT
oVeR ConCReTe WeT BlaDes 12”-36”
Premium Black - P
• A high quality blade that delivers long
lasting, fast cutting performance.
• Designed for contractors who demand
maximum efficiency and value.
SIZE
LIST PRICE
WITH ‘X’
SLANT
SEGMENT
LIST PRICE
WITH ‘R’
RADIUS
SEGMENT
LIST PRICE
WITH ‘Q’
INSERT
SEGMENTS
12" X .125
$652
$689
$819
12" X .140
764
786
923
12" X .187
885
957
1,106
12" X .250
1,114
1,181
1,361
12" X .375
1,603
1,945
14" X .125
802
853
965
14" X .140
927
979
1,099
14" X .187
1,104
1,171
1,303
14" X .250
1,413
1,462
1,618
14" X .375
1,973
2,109
2,315
16" X .125
953
976
1,163
16" X .140
1,082
1,109
1,305
18" X .125
1,026
1,084
1,284
18" X .140
1,180
1,240
1,451
18" X .155
1,310
1,368
1,590
18" X .175
1,334
1,441
1,725
18" X .187
1,399
1,479
1,713
18" X .250
1,736
1,847
2,120
20" X .125
1,132
1,189
1,418
20" X .140
1,294
1,345
1,586
20" X .155
1,440
1,478
1,733
24" X .155
1,684
1,752
2,045
24" X .175
1,851
1,903
2,217
24" X .187
1,919
1,988
2,314
26" X .155
1,878
1,931
2,245
26" X .175
2,038
2,097
2,435
26" X .187
2,166
2,230
2,576
30" X .175
2,085
2,149
2,486
30" X .187
2,172
2,240
2,588
32" X .187
2,350
2,518
2,821
36" X .175
2,642
2,732
3,111
36" X .187
2,744
2,836
3,234
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
PRemiUm BlaCK Cutting asphalt with low HP saw specifications
A635P
A615P
A606P
A605P
A350P
PRemiUm BlaCK Cutting asphalt with High HP saw specifications
A665P
A635P
A630P
A606P
A605P
PRemiUm BlaCK Cutting Green Concrete with low HP saw specifications
G670P
G660P
G606P
G606P
G605P
PRemiUm BlaCK Cutting Green Concrete with High HP saw specifications
G670P
G660P
G606P
G606P
G605P
PRemiUm BlaCK Cutting asphalt over Concrete with low HP saw specifications
AC64DWP
AC64DWP
AC64DWP
AC62DWP
AC62DWP
PRemiUm BlaCK Cutting asphalt over Concrete with High HP saw specifications
AC64DWP
AC64DWP
AC64DWP
AC62DWP
AC62DWP
17
protection) M
at (800) 321-5336.
DiamonD BlaDes
PRemiUm BlaCK
WeT BlaDes
DiamonD BlaDes
PRo BlUe
WeT BlaDes
PRo BlUe asPHalT/GReen ConCReTe/asPHalT oVeR
ConCReTe WeT BlaDes 12”-36”
SIZE
LIST PRICE
WITH ‘X’
SLANT
SEGMENT
LIST PRICE
WITH ‘R’
RADIUS
SEGMENT
LIST PRICE
WITH ‘Q’
INSERT
SEGMENTS
12" X .125
$696
$730
$859
12" X .140
811
834
968
12" X .187
964
1,017
1,163
1,264
1,439
1,882
1,842
2,062
12" X .250
12" X .375
14" X .125
876
923
1,037
14" X .140
1,012
1,059
1,179
14" X .187
1,202
1,275
1,408
14" X .250
1,500
1,599
1,756
14" X .375
2,371
2,318
2,521
16" X .125
1,034
1,057
1,244
16" X .140
1,159
1,203
1,399
18" X .125
1,142
1,202
1,409
18" X .140
1,314
1,371
1,588
18" X .155
1,476
1,518
1,744
18" X .175
1,552
1,645
1,882
18" X .187
1,590
1,653
1,932
18" X .250
2,100
2,065
2,346
20" X .125
1,289
1,319
1,558
20" X .140
1,461
1,498
1,744
20" X .155
1,605
1,645
1,906
24" X .155
1,920
1,967
2,274
24" X .175
2,090
2,144
2,468
• Same high quality as our Premium Black blade
with a taller segment to lower your cutting cost.
24" X .187
2,189
2,245
2,581
• Best used with 35HP and up
26" X .155
2,089
2,170
2,498
26" X .175
2,300
2,363
2,711
26" X .187
2,436
2,512
2,873
30" X .175
2,357
2,422
2,771
30" X .187
2,445
2,533
2,892
32" X .187
2,657
2,702
36" X .175
2,891
2,975
3,291
36" X .187
3,012
3,102
3,508
Professional Blue - T
protection) M
at (800) 321-5336.
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
PRo BlUe Cutting asphalt with low HP saw specifications
A635T
A615T
A606T
A605T
A350HT
PRo BlUe Cutting asphalt with High HP saw specifications
A665T
A635T
A630T
A606T
A605T
PRo BlUe Cutting Green Concrete with low HP saw specifications
G670T
G660T
G606T
G606T
G605T
PRo BlUe Cutting Green Concrete with High HP saw specifications
G670T
G660T
G606T
G606T
G605T
PRo BlUe Cutting asphalt over Concrete with low HP saw specifications
AC64DWT
AC64DWT
AC64DWT
AC62DWT
AC62DWT
PRo BlUe Cutting asphalt over Concrete with High HP saw specifications
AC64DWT
AC64DWT
AC64DWT
AC62DWT
AC62DWT
18
sUPeR PRemiUm silVeR asPHalT/GReen ConCReTe/
asPHalT oVeR ConCReTe WeT BlaDes 12”-36”
SIZE
LIST PRICE
WITH ‘X’
SLANT
SEGMENT
LIST PRICE
WITH ‘R’
RADIUS
SEGMENT
LIST PRICE
WITH ‘Q’
INSERT
SEGMENTS
12" X .125
$795
$811
$938
1,161
1,132
1,279
12" X .140
12" X .187
1,057
14" X .125
988
1,032
1,146
14" X .140
1,134
1,180
1,298
14" X .187
1,350
1,428
1,559
14" X .250
1,759
1,805
1,963
14" X .375
2,572
16" X .125
16" X .140
1,290
1,336
1,532
18" X .125
1,306
1,339
1,543
18" X .140
1,516
1,527
1,742
18" X .155
1,649
1,686
1,914
18" X .175
1,774
1,833
18" X .187
18" X .250
• A high quality long life blade.
• Made with high diamond concentration.
• Especially well suited for sawing in tough applications.
1,843
2,081
1,472
1,789
2,239
20" X .125
super Premium silver - sP
2,830
1,189
2,608
20" X .140
1,613
1,722
1,909
20" X .155
1,776
1,831
2,089
24" X .155
2,141
2,258
2,495
24" X .187
2,472
2,519
2,851
2,680
26" X .155
2,360
2,415
26" X .175
2,559
2,630
26" X .187
2,706
2,810
3,165
30" X .175
2,673
2,736
3,057
30" X .187
2,767
2,843
32" X .187
36" X .187
3,196
3,383
3,406
When creating a specification use this formula:
Blade type A or AC or G, (spec #) (grade) (wear protection) M
example: a606PQm
soFT
meD. soFT
meDiUm
meD. HaRD
HaRD
sP silVeR Cutting asphalt with low HP saw specifications
A635SP
A615SP
A606SP
A605SP
A350SP
sP silVeR Cutting asphalt with High HP saw specifications
A665SP
A635SP
A630SP
A606SP
A605SP
protection) M
sP silVeR Cutting Green Concrete with low HP saw specifications
G670SP
G660SP
G606SP
G606SP
G605SP
sP silVeR Cutting Green Concrete with High HP saw specifications
G670SP
G660SP
G606SP
G606SP
G605SP
sP silVeR Cutting asphalt over Concrete with low HP saw specifications
AC64DWSP AC64DWSP AC64DWSP AC62DWSP AC62DWSP
sP silVeR Cutting asphalt over Concrete with High HP saw specifications
AC64DWSP AC64DWSP AC64DWSP AC62DWSP AC62DWSP
19
at (800) 321-5336.
DiamonD BlaDes
WeT BlaDes
Wall saW & HanD saW BlaDes
DiamonD BlaDes
maximize Your Cutting with our original and split segment Designs
40mm
original segment
20mm
split segment
For use on wall
or hydraulic
hand saws.
16mm
split segment
Select
Grade
sP - super Premium
T - Professional
P - Premium
H - Heavy Duty
(other grades available
upon request)
-20mm split seg
-9mm split seg
• Split segments give
less resitance for
faster and more
economical cutting.
• This -20 design
keeps segments
cooler in higher
steel applications.
Wall saw - Hand saw Blade specifications
• For fast cutting and
enhanced blade life
For PROFESSIONAL
GRADE ONLY
-16mm split seg
-40mm straight seg
• Original segment for
standard cutting and
long life.
Sandwich
Non-Sandwich
W212
W20
General purpose hard aggregate
W323
W2033
Fast cutting and long life
W3A3
W33
Fast cutting general purpose
W434
W3342
General purpose medium aggregate
W535
W42
Long life general purpose
W545
W49
Long life soft aggregate, brick & block
W5A5
W50
• This ‘horseshoe’
shaped design
provides faster
cutting speeds
and long life and
also helps reduce
segment loss.
Application
Fast cutting hard aggregate
When creating a specification for wall saw blades, use this formula:
W (spec) (grade) -20, -16 or M
Example: W535P-20
When ordering -20 blades, add MM to end of part number. Example: WP24187MM
When ordering -16 blades, add M16 to end of part number. Example: WP24187M16
Wall saw Blade Diamond Depths
Segment
Type
H.D.
Orange
(H)
Premium
Black
(P)
Pro
Blue
(T)
Super
Premium
(SP)
40mm
.236
.250
.310
.375
20mm
.310
.310
.375
.437
16mm
.310
.310
.375
.450
9mm
.310
.310
.375
.450
All wall saw & hand saw blades come with 1” arbor.
Custom arbor sizes/types are available. When ordering, please
specify arbor size/type if different from 1”.
* Additional blade sizes are available upon request.
20
maximize Your Cutting with our original and split segment Designs
SIZE
Wall saW & HanD saW BlaDes 12”-72”
U-GUlleT Wall saW & HanD saW BlaDes 18”-36”
H.D.
Premium Black
Pro Blue
Super Prem
Orange (H)
(P)
(T)
Silver (SP)
.310 Diamond .310 Diamond .375 Diamond .437 Diamond
Depth
Depth
Depth
Depth
SIZE
12" x .110
$531
12" x .125
567
14" x .110
14" x .125
18" x .187
$1,050
$1,210
18" x .210
1,099
1,284
$1,415
20" x .125
1,395
1,496
$774
789
24" x .187
1,455
1,569
1,756
698
820
886
24" x .210
1,520
1,707
1,911
780
889
912
26" x .187
1,633
1,766
1,979
639
$567
667
757
14" x .140
16" x .125
$619
Premium Black
Pro Blue
Super Prem
(P)
(T)
Silver (SP)
.310 Diamond .375 Diamond .437 Diamond
Depth
Depth
Depth
18" x .125
855
971
998
30" x .187
1,804
2,041
2,306
18" x .187
1,151
1,274
1,401
30" x .210
1,879
2,117
2,371
18" x .210
1,223
1,350
1,488
34" x .187
2,250
2,395
18" x .220
1,348
1,498
1,627
34" x .210
2,278
2,535
18" x .250
1,588
1,725
36" x .187
2,307
2,550
20" x .125
980
1,082
36" x .210
2,464
2,701
1,147
20" x .140
864
1,034
1,134
1,214
20" x .187
1,048
1,265
1,385
1,530
20" x .210
1,076
1,317
1,466
1,616
24" x .140
1,034
1,276
1,314
1,461
24" x .187
1,285
1,531
1,651
1,839
24" x .210
1,332
1,622
1,797
2,004
1,785
1,939
2,154
2,121
2,324
2,602
24" x .220
24" x .250
1,706
26" x .187
1,468
1,717
1,857
2,107
26" x .210
1,518
1,848
2,006
2,251
1,856
2,060
2,259
30" x .187
1,606
1,897
2,120
2,356
30" x .210
1,690
2,046
2,279
2,507
30" x .220
1,838
2,313
2,465
2,683
30" x .250
2,650
2,873
3,270
32" x .175
2,091
2,377
30" x .175
32" x .187
2,264
2,502
2,536
32" x .210
2,422
2,608
2,759
36" x .175
2,384
2,613
2,849
2,425
2,669
2,911
2,589
2,842
3,152
2,640
3,020
3,366
3,207
3,437
3,848
36" x .187
1,901
2,106
36" x .210
36" x .220
2,295
36" x .250
42" x .187
3,411
3,692
3,969
42" x .210
3,707
3,872
4,211
42" x .250
3,876
4,172
4,604
48" x .210
4,026
4,399
4,723
48" x .250
4,364
4,737
5,186
4,739
5,033
5,473
54" x .250
5,147
5,462
6,026
60" x .220
6,473
6,618
6,803
11,552
11,731
54" x .210
72" x .220
2,753
4,093
11,161
21
3,060
UlTimaTe Wall saW BlaDe
• -20 or -16 split sandwich segment designed
with ‘U’ gullet core
• Cuts faster, removes slurry more efficiently
• Holds side clearances better
(Just order your normal -20 or -16 blades and
add ‘U’ to the end of the specification)
When creating a specification for U-Gullet wall
saw blades, use this formula:
W (spec) (grade) -20, -16 or M + U
Example: W535P-20U or W323SP-16U
sandwich
segment
High Diamond
Concentration
Low Diamond
Concentration
sandwich seg Wall saw Blades
• Faster cutting - blades maintain better clearance
for their full life and better tracking in the cut
• Longer life - sandwich segs help keep blades that
are 75% worn in use by preventing breakdown
due to binding and lack of side clearance
DiamonD BlaDes
Wall saW & HanD saW BlaDes
WeT sPeCialTY BlaDes
DiamonD BlaDes
Random Crack, Joint Widening and Traffic loop Blades
Random Crack saw Blades
Random Crack Saw Blades are used to prepare random cracks for resealing with
joint sealant material. Available in Heavy Duty Orange (H) and Premium Black (P)
Random Crack saw Blades 5”-8”
All crack saw blades can be either laser welded or silver
brazed upon request.
Undercut protection may be added to any random crack
saw blade.
* Additional blade sizes are available upon request.
SIZE
H.D.
Orange (H)
Part #
H.D.
Orange
LIST PRICE
Premium
Black (P)
Part #
Premium
Black List
Price
Add for
(Q) Insert
Protection
5" X .250
CCH05250
$414
CCP05250
$530
$41
5" X .375
CCH05375
541
CCP05375
694
62
5" X .500
CCH05500
672
CCP05500
856
79
6" X .250
CCH06250
472
CCP06250
599
54
6" X .375
CCH06375
616
CCP06375
784
81
6" X .500
CCH06500
757
CCP06500
962
104
7" X .250
CCH07250
561
CCP07250
747
54
7" X .375
CCH07375
766
CCP07375
973
81
Random Crack saw specifications
7" X .500
CCH07500
942
CCP07500
1,204
104
Aggregate
Type
Green
Concrete
Cured
Concrete
8" X .250
CCH08250
650
CCP08250
826
54
8" X .375
CCH08375
842
CCP08375
1,076
81
Hard to
Med. Hard
G64DW
C56
8" X .500
CCH08500
1,038
CCP08500
1,324
104
Soft
G606DW
C60
NOTE: Please see page 4 for (Q) Insert Protection description.
Joint Widening & Cleaning
Joint Widening & Cleaning specifications
Widen control joints in green concrete or
old sealed joints in cured concrete.
w Used in pairs with spacers, which allow the
desired joint width to be maintained by flipping
the blades inside out as the side gauge wears
on the outside edge
w Spacers used between joint blades are made
specifically for your machine and application
w Available in:
Premium Black (P)
Professional Blue (T)
Aggregate Type
Specification
Hard-Average Abrasive
G62DW
Hard-High Abrasive
G64DW
Med Hard-Average Abrasive
G605DW
Soft-High Abrasive
G606DW
Traffic Loop Blades 12”-18”
“Traffic” loop Blades
Used for traffic loop cutting. Disc style core
for use on competition style loop saws. Uses
asphalt or concrete wet blade specifications give us your application and we’ll determine
the blade for you. Typical grades include:
Premium Black (P), Professional Blue (T)
* Other sizes may be available.
Call the factory for more information.
SIZE
Premium
Black (P)
Part #
Premium
Black
LIST PRICE
Pro Blue (T)
Part #
Pro Blue
List Price
12" x .250
CLP12250
$2,518
CLT12250
$2,539
12" x 310
CLP12310
2,629
CLT12310
2,655
12" x 375
CLP12375
2,750
CLT12375
2,782
14 x .250
CLP14250
2,985
CLT14250
3,014
14" x .310
CLP14310
3,119
CLT14310
3,151
14" x .375
CLP14375
3,267
CLT14375
3,302
14" x .500
CLP14500
3,560
18" x ,250
CLP18250
3,706
CLT18250
3,734
18" x .310
CLP18310
3,868
CLT18310
3,905
18" x .375
CLP18375
4,047
CLT18375
4,091
18" x .500
CLP18500
4,408
22
Bevel, ninja Joint Cleaning and Refractory Blades
Bevel wet blades are used in pairs
with each blade having a 45 degree
angle giving the user a 90 degree
bevel in the cut.
Additional blade sizes are
available upon request.
Prices are per single blade.
Bevel Blades 8”-12”
SIZE
H.D. Part #
H.D.
List Price
Premium
Part #
Premium
List Price
8" X .250
CH08250MBVL
$600
CP08250MBVL
$779
12" X .250
CH12250MBVL
900
CP12250MBVL
1,130
Bevel Blade specifications
• Blades must be ordered in pairs.
• Bevel blades can be redressed to
maintain chamfer for angle.
Available in
or Premium Black (P)
Aggregate Type
Specification
Hard
C56
C60
C64
Medium Hard
Soft
(Spacers sold separately.)
ninja Joint Cleaning Blades 12”-14”
SIZE
H.D. Part #
H.D.
List Price
Premium
Part #
Premium
List Price
Pro Blue
Part #
Pro Blue
List Price
12" X .187
CNH12187M
$497
CNP12187M
$650
CNT12187M
$721
12" X .220
CNH12220M
608
CNP12220M
747
CNT12220M
860
12" X .250
CNH12250M
638
CNP12250M
892
CNT12250M
935
14" X .187
CNH14187M
613
CNP14187M
835
CNT14187M
949
14" X .220
CNH14220M
787
CNP14220M
988
CNT14220M
1,166
14" X .250
CNH14250M
851
CNP14250M
1,114
CNT14250M
1,185
ninja Joint Cleaning Blades are used in pairs for fast, aggressive removal of
sealants and compressibles in existing control joints while cutting joint face into
smooth surface for resealing. See Joint Widening Specifications for Bonds.
Available in Heavy Duty Orange (H),
Premium Black (P) and Pro Blue (T).
These are typical blades sizes.
Custom sizes may be available.
Spacers are used between
Ninja blades and are made
specifically for your machine
and application.
(Spacers sold separately.)
*Ninja blades must be used in pairs. Prices listed are
for single blades. Spacers are required for Ninja blades.
Please call the factory for customized spacers.
Refractory Blades 12”-20”
SIZE
H.D.
Orange (H)
Part #
H.D.
Orange
List Price
Premium
Black (P)
Part #
Premium
Black
List Price
Supreme
Silver (U)
Part #
Supreme
Silver
List Price
12" X .110
RH12110M
$371
RP12110M
$503
RU12110M
$602
12" X .125
RH12125M
394
RP12125M
547
RU12125M
655
14" X .110
RH14110M
461
RP14110M
611
RU14110M
722
14" X .125
RH14125M
496
RP14125M
667
RU14125M
778
16" X .125
RH16125M
553
RP16125M
709
RU16125M
938
18" X .125
RH18125M
632
RP18125M
805
RU18125M
970
20" X .125
RH20125M
718
RP20125M
911
RU20125M
1,080
Refractory Blade specifications
Material/Abrasive Level
Specification
High alumina, hard materials, fast cutting
R92-(grade)
Medium duty fire brick, fast cutting
R95-(grade)
General purpose, insulating brick, ladle brick
R98-(grade)
Long life for silicon carbide & other abrasive materials
R99-(grade)
23
Long Lasting, Fast Cutting
in a Wide Range of Refractory Materials
Available in these high concentration quality grades:
Heavy Duty Orange (H), Premium Black (P)
& Supreme Silver (U)
1” arbor with drive pin hole is standard. Custom arbor sizes/
types available upon request. When ordering, please specify
arborsize/type.Additionalbladesizesavailableuponrequest.
DiamonD BlaDes
DiamonD BlaDes
Refractory, Ring Blades, Diamond Wire and Grooving & Grinding Blades
Chamfer special Grinding Blade
Chamfer Grinding
Blade Used for angle
and Decorative Cuts
Size
Part #
Cat #
Description
List Price
12” x .250” x 1”
CP12250CHF15
04094
Premium with 1.575”
long, 45 degree
segments
$3,886
12” x .250” x 1”
CP12250CHF1
41198
Premium with 1” long,
45 degree segments
3,551
Wall
Initial
Cut
For use on walk
behind saws.
45 degree
Chamfer
cut
Material to
For use on wall
or hydraulic
hand saws.
be cut
Grinding and Grooving Wet Blades
Diamond Products helps maximize the life of its grinding
heads by matching the correct
diamond concentrations with machine horsepower
We manufacture high quality, long lasting CoRe CUT
grinding and grooving blades in all arbors for all types of machines.
Call us at 1-800-321-5336 for blade specifications for your machine.
PCD Grinding Heads
PCD Grinding Head
For epoxy and glue removal.
Use in multiples on 8” or 10”
grinding head.
Part #
CAT #
Application
List Price
PCDWING
21751
PCD Wing for grinding (3
pieces per grinding head)
$180
GH08PCD
13406
8” grinding head with 2
PCD grinding shoes
534
GH10PCD
23758
10” grinding head with 3
PCD grinding shoes
687
CGPC4500
14986
General Purpose
epoxy removal
310
CGPC7000
21715
Carbide insert only
387
For use on CoRe CUT single
head floor grinders.
24
Grinding Heads and Grinding Blocks
Floor Grinding Heads
• Large 10” and 12” grinding heads that take the rough spots out of concrete surfaces in a hurry along with an
8” head for smaller units
• Effective on floors, streets, highways, sidewalks and more
• Cleans, levels and smooths bumps and uneven areas
• Removes rain spots and epoxies
• For use on Core Cut floor grinders and other similiar machines
DiamonD BlaDes
WeT FlooR GRinDinG
Heavy Duty orange Floor Grinding Heads
Material, Abrasive Level
Hard, Non-Abrasive Material
Soft, Abrasive Material
8”, 12 Seg
Specification
CAT #
List Price
10”, 12 Seg
Specification
CAT #
List Price
GSH9
GHH9
03330
14317
$405
405
GSH10
GHH10
11393
23592
$557
557
10”, 24 Seg
Specification
CAT #
List Price
12”, 12 Seg
Specification
CAT #
List Price
12”, 24 Seg
Specification
CAT #
List Price
GSH20
GHH20
11401
11398
$923
923
GSH12
GHH12
69786
76758
$788
788
GSH24
GHH24
39534
38541
$1,153
1,153
Premium Black Floor Grinding Heads
10”, 12 Seg
Specification
CAT #
List Price
10”, 24 Seg
Specification
CAT #
List Price
GSP10
GHP10
11406
20198
$690
690
GSP20
GHP20
00019
11410
$1,168
1,168
12”, 12 Seg
Specification
CAT #
List Price
12”, 24 Seg
Specification
CAT #
List Price
GSP12
GHP12
41193
41194
$927
927
GSP24
GHP24
39164
40051
$1,380
1,380
Grinding Blocks
•
•
•
•
•
Grinding blocks designed for wet floor grinding
Can be easily re-segmented
Set of three or six diamond blocks available that also work with competition-style floor grinders
Works best for grinding high spots, preparation for new finished or polished concrete floors
Made with top quality diamonds to ensure long lasting, fast grinding efficiency
Grinding Block specifications
Aluminum Disc Shown with Wooden
Wedges and Blocks
Diamond
Segmented
Grinding Block
Carbide
Cutting Block
Grinding blocks have a bolt-on back
which offers a more secure holding of
the diamond grinding block.
Part #
GB4000
GB4000
GB4000
CAT #
39674
68323
76121
Application
Hard Concrete, Non-Abrasive
General Purpose
Epoxy Mortar, Long Life
Spec
GB64
GB66
GB68
List Price
$197
197
197
GB4000
GB4000
GB4000
43782
60218
45915
60 Grit
80 Grit
120 Grit
GB50T60
GB50T80
GB50T120
$197
197
197
GB4000S
GB4000S
GB4000S
GB4000S
GB4000S
93642
54071
96260
96261
95837
50 Grit
60 Grit
64 Grit
66 Grit
68 Grit
GB50
GB60
GB64
GB66
GB68
$160
160
160
160
160
CCB4000
CCBI4000
GB4000H
6041057
6041058
WEDGES
72741
85627
93254
55473
47862
46872
Terrazzo Grinding - Contains Diamonds
Grinding Block steel shoe with 4 segments
Carbide Cutting Block
Carbide Cutting Insert Only
Block Holding Base
Aluminum Disc - Right Side w/3 slot
Aluminum Disc - Left Side w/3 slot
Wooden Wedges for Holding Blocks
$226
64
72
126
126
1
*Designed for our dual head floor grinders. Recommended to replace all 3 blocks at the same time.
25
WeT DiamonD WiRe
DiamonD BlaDes
High Quality Diamond Beaded Wire
Diamond Beaded Wire
For use on all Core Cut wire saws for cutting reinforced
concrete, masonry and stone. Available with rubber injected
and plastic coated versions in Premium and Supreme grades.
Diamond Beaded Wire
Description
Concentration
Diamond Grade
Specification
Part #
Cat #
List Price
11 x 6 Premium Rubber Wire
Very High
Medium
BS-421
WR1160PR
57519
$144
11 x 6 Supreme Rubber Wire
High
Ultra High
BS-30
WR1160UR
99948
164
10 x 6 Electro Plated Wire
(Plastic Coated - beads sharpened)
High
Ultra High
BSG3
SWRD10EP3
28154
130
10 x 6 Electro Plated Wire
(Rubber Coated)
High
Ultra High
BSC3
WRD10.2EP3S 48781
133
HT45 Hydraulic Crimping Tool
Makes it easy to repair or connect diamond wire
Part # 1400174 - Cat # 68408 - List Price: $1,564
Wire Connectors 3/8”
Part # 1400177 - Cat # 74910 - List Price: $30
Wire and Bead accessories
swivel Connectors
C-12 Hand Held Wire Cutter
26
Description
Part #
Cat #
List Price
3/4” Spring
1900062
00157
$1
Brass Crimp Bead
1900182
00161
1
3/16” Galvanized Wire
1900235
53461
4
5/16” Wire Connector
1900183
00162
3
Swivel Crimp Tool
860404
67966
872
Hand Crimping Tool
1900074
00160
908
For standard Ring saws & The Dragon Ring saw
Heavy Duty orange Wet Dragon Claw Ring Blades
SIZE
CAT #
Specification
List Price
16” x .155
29301
C41HM-16
$1,366
16” x .155
93866
C42HM-16
1,366
20” x .155
29303
C41HM-16
1,520
20” x .155
93865
C42HM-16
1,520
Dragon Claw Ring Blades
· For use ONLY with the Dragon Ring Saw
· Special 16mm split segments for fast cutting and
slurry removal
· Use with water only
Bond Specifications:
C41HM-16 - Very Hard Aggregate
C42HM-16 - Hard to Medium Hard Aggregate
· Blades include wear plate for saw
(also sold separately)
Wet Ring saw Blades
SIZE
CAT #
Specification
List Price
14” x .165
90666
C42HM
$641
14” x .165
92209
C50HM
641
14” x .165
90021
C51WHM
641
14” x .165
92527
G50HM
641
14” x .235
91403
C42WHM
925
14” x .235
91404
C51WHM
925
14” x .165
91495w
C42HM
665
14” x .165
92666w
C50HM
665
14” x .165
90134w
C51WHM
665
14” x .165
54864w
G50HM
665
14” x .235
92576w
C42WHM
933
14” x .235
91057w
C51WHM
933
w Denotes blades that include drive wheel.
NOTE: These blades DO NOT fit the
Dragon Ring Saw
Ring saw Blades specs
C42HM
Very Hard Concrete
C42WHM
Very Hard Concrete with High Steel
C50HM
Hard Concrete
C51WHM
Hard Concrete with Moderate Steel
G50HM
Green Concrete with Hard Aggregate
•
•
•
•
27
Available with or without drive wheel
Custom wet bond specifications available
Offers a 10” cutting depth
Use for pre-cutting or following chain cutting
DiamonD BlaDes
WeT RinG saW BlaDes
DiamonD BlaDes
HiGH sPeeD DiamonD BlaDes Value Priced, Cost effective Cutting
Delux-Cut
• Basic quality diamond and
economical cutting value
• Dry or wet cutting
• Diamond depth of .472”
• Segment height of .512”
Specifications:
H8D - General purpose
H10D - Asphalt, green concrete,
brick and block
SIZE
10” x .110 x 1”
12” x .110 x 1”
14” x .125 x 1”
16” x .125 x 1”
H8D
CAT #
22856
70495
70499
20926
H8D 5-Packs
star Blue
standard Gold
• Good quality diamond and good
cutting value
Specifications:
H8B - General purpose
H10B - Asphalt, green concrete,
brick and block
H8B
List Price
$94
108
114
233
SIZE
10” x .110 x 1”
12” x .110 x UNV
14” x .125 x UNV
16” x .125 x UNV
CAT #
17710
92398
85261
21424
H8B 5-Packs
• Better quality diamond and better
cutting value
Specifications:
H7S - Reinforced concrete hard materials
H8S - General purpose
H10S - Asphalt, green concrete,
brick and block
H7s
List Price
$116
121
169
301
SIZE
12” x .110 x UNV
14” x .125 x UNV
16” x .125 x UNV
CAT #
57706
57719
91674
List Price
$197
274
358
SIZE
12” x .110 x UNV
14” x .125 x UNV
16” x .125 x UNV
57707
57720
92873
$197
274
358
12” x .125 x UNV
14” x .125 x UNV
16” x .125 x UNV
57708
57721
91767
$197
274
358
H8s
12” x .110 x 1”
14” x .125 x 1”
01795
01796
$519
549
12” x .110 x UNV
14” x .125 x UNV
95054
95055
$570
801
12” x .125 x UNV
14” x .125 x UNV
16” x .125 x UNV
12” x .110 x 1”
14” x .125 x 1”
17560
17580
$1,038
1,098
50526
50537
50545
12” x .125 x 1”
14” x .125 x 1”
16” x .125 x UNV
03048
14355
21217
$121
169
301
$108
114
233
12” x .125 x UNV
14” x .125 x UNV
16” x .125 x UNV
12” x .125 x 1”
14” x .125 x 1”
36841
15889
$570
801
50563
50595
$519
$549
H8D 10-Packs
12” x .110 x 1”
14” x .125 x 1”
16” x .125 x 1”
H10D
H10D 5-Packs
12” x .110 x 1”
14” x .125 x 1”
H10B
H10B 5-Packs
imperial Purple
• Better quality diamond and very
good cutting life
Specifications:
H8I - General purpose very good life
H10I - Asphalt, green concrete,
brick and block very good life
H10s
1” arbor blades include 20mm heavy duty bushing
UNV = 1” and 20 mm universal arbor
List Price
$280
392
490
15376
15379
15381
$280
392
490
H10i
Dry blades can also be used
with water for cooling.
5-packs and 10-packs shipped without retail packaging.
These are packed in one box with cardboard separations.
CAT #
85149
78976
48798
For use on high speed, masonry and
low HP walk behind saws
individual Blades arrive in the
latest Detailed Retail Packaging
Quality Code denotes grade
and color code
Delux-Cut (D)
Star Blue (B)
Standard Gold (S)
Imperial Purple (I)
X-tra Plus Red (X)
Premium Black (P)
Super Heavy Duty Silver (SH)
X-tra Plus Red Ultimate (XU)
Heavy Duty Orange Ultimate (HU)
Cut-ALL Ultimate (CAU)
Cut-ALL (CA)
Imperial Purple Cut-ALL (ICA)
H8i
HiGH sPeeD sPeCiFiCaTion CHaRT
Quality level
Based on quality
not seg height
1
2
3
4
6
7
8
7
6
7
7
7
4
Cured Concrete
H8D
H8B
H7S
H8I
H7X
H7H
H7P
H7SH
H7XU
H7HU
H8CAU
H8CA
H8ICA
28
General
Purpose
H8D
H8B
H8S
H8I
H8X
H8H
H8P
H8SH
H8XU
H8HU
H8CAU
H8CA
H8ICA
material Being Cut
Green Concrete
Asphalt
Brick & Block
H10D
H10B
H10S
H10I
H10X
H10H
H10P
H10SH
H10XU
H10HU
H8CAU
H8CA
H8ICA
H10D
H10B
H10S
H10I
H10X
H10H
H10P
H10SH
H10XU
H10HU
H8CAU
H8CA
H8ICA
H10D
H10B
H10S
H10I
H10X
H10H
H10P
H10SH
H10XU
H10HU
H8CAU
H8CA
H8ICA
Heavy Duty Diamonds with
super High segments
X-tra Plus Red
• Higher quality diamond and long
cutting life
Specifications:
H7X - Reinforced concrete - hard
materials and long life
H8X - General purpose - long life
H10X - Asphalt, green concrete,
brick and block - long life
Heavy Duty orange
• Very high quality diamond and
longer cutting life
Specifications:
H7H - Reinforced concrete - hard
materials and longer life
H8H - General purpose - longer life
H10H - Asphalt, green concrete,
brick and block - longer life
H7X
Premium Black
• Highest quality diamond and
longest cutting life
Specifications:
H7P - Reinforced concrete, hard
materials with heavy steel longest life
H8P - General purpose - longest life
H10P - Asphalt, green concrete,
brick and block - longest life
H7H
H7P
super H.D. silver
super long cutting life
Specifications:
H7SH - Reinforced concrete, hard
materials with heavy steel super long life
H8SH - General purpose - super
long life
H10SH - Asphalt, green concrete,
brick and block - super
long life
H7sH
SIZE
CAT #
List Price
SIZE
CAT #
List Price
SIZE
CAT #
List Price
SIZE
CAT #
List Price
10” x .110 x 1”
11762
$325
10” x .110 x 1”
11421
$393
12” x .110 x UNV
53745
$512
12” x .110 x UNV
57723
$529
12” x .110 x UNV
53710
368
12” x .110 x UNV
53729
441
12” x .125 x UNV
53749
520
12” x .125 x UNV
57727
567
12” x .125 x UNV
53717
403
12” x .125 x UNV
53733
484
14” x .110 x UNV
53753
644
14” x .110 x UNV
57731
644
14” x .110 x UNV
53721
460
14” x .110 x UNV
53737
554
14” x .125 x UNV
53757
701
14” x .125 x UNV
57735
694
14” x .125 x UNV
53725
497
14” x .125 x UNV
53741
600
16” x .125 x UNV
90597
819
16” x .125 x UNV
33327
802
16” x .125 x UNV
75606
588
14” x .235 x 1”
11546
1,074
18” x .125 x 1”
11633
893
18” x .125 x 1”
83749
871
18” x .125 x 1”
15713
643
16” x .125 x UNV
91045
705
20” x .125 x 1”
67003
923
20” x .125 x 1”
11802
735
18” x .125 x 1”
11555
768
12” x .110 x UNV
53746
$512
20” x .125 x 1”
11560
882
12” x .125 x UNV
53750
520
12” x .110 x UNV
57724
$529
14” x .110 x UNV
53754
644
12” x .125 x UNV
57728
567
11422
$393
14” x .125 x UNV
53758
701
14” x .110 x UNV
57732
644
10” x .110 x 1”
H8X
H8H
H8P
H8sH
11763
$325
12” x .110 x UNV
53714
368
12” x .125 x UNV
53718
403
12” x .110 x UNV
53730
441
16” x .125 x UNV
91164
819
14” x .125 x UNV
57736
694
14” x .110 x UNV
53722
460
12” x .125 x UNV
53734
484
18” x .125 x 1”
11634
893
16” x .125 x 1”
32399
802
14” x .125 x UNV
53726
497
14” x .110 x UNV
53738
554
18” x .125 x 1”
69223
871
16” x .125 x UNV
89386
588
14” x .125 x UNV
53742
600
12” x .110 x UNV
53747
$512
20” x .125 x 1”
66622
923
18” x .125 x 1”
11799
643
14” x .235 x 1”
11547
1,074
12” x .125 x UNV
53751
520
20” x .125 x 1”
15137
735
16” x .125 x UNV
90185
705
14” x .110 x UNV
53755
644
12” x .110 x UNV
57725
$529
18” x .125 x 1”
11556
768
14” x .125 x UNV
53759
701
12” x .125 x UNV
57729
567
11761
$325
20” x .125 x 1”
11561
882
16” x .125 x UNV
92168
819
14” x .110 x UNV
57733
644
18” x .125 x 1”
11631
893
14” x .125 x UNV
57737
694
11418
$393
16” x .125 x 1”
74438
802
10” x .110 x 1”
H10X
10” x .110 x 1”
H10H
H10P
H10sH
12” x .110 x UNV
53715
368
12” x .125 x UNV
53719
403
10” x .110 x 1”
14” x .110 x UNV
53723
460
12” x .110 x UNV
53731
441
18” x .125 x 1”
64096
871
14” x .125 x UNV
53727
497
12” x .125 x UNV
53735
484
20” x .125 x 1”
27096
923
16” x .125 x UNV
76291
588
14” x .110 x UNV
53739
554
18” x .125 x 1”
11798
643
14” x .125 x UNV
53743
600
20” x .125 x 1”
11801
735
14” x .235 x 1”
28280
1,074
16” x .125 x UNV
89971
705
18” x .125 x 1”
14231
768
20” x .125 x 1”
11558
882
Dry blades can also be used
with water for cooling.
29
DiamonD BlaDes
HiGH sPeeD DiamonD BlaDes High Quality, long life Cutting
HiGH sPeeD UlTimaTe BlaDes
DiamonD BlaDes
Wide spaced Gullets for Fast, High Quality Cutting
X-Tra Plus Red
Heavy Duty orange
• Higher quality diamond and long
cutting life
• Very high quality diamond and longer
cutting life
Specifications:
H7XU - Reinforced concrete hard
materials
H8XU - General purpose - long life
H10XU - Green concrete, asphalt, brick &
block - longer life
Specifications:
H7HU - Reinforced concrete hard
materials - longer life
H8HU - General purpose - longer life
H10HU - Green concrete, asphalt, brick &
block - longer life
H7XU
H7HU
Cut-all multi-Purpose
Ultimate
• Very high quality diamond and longer
cutting life
• Great for the general contractor that
requires a faster cut to get the job done
quickly
Specification:
H8CAU - Multi-Purpose best suited for
harder materials
H8CaU
SIZE
CAT #
73928
List
Price
$350
12” x .125 x UNV
21922
List
Price
$384
SIZE
CAT #
12” x .125 x UNV
78765
List
Price
$323
14” x .125 x UNV
78766
363
14” x .125 x UNV
74413
396
14” x .125 x UNV
21927
482
16” x .125 x UNV
78767
449
16” x .125 x UNV
73192
481
16” x .125 x UNV
21928
529
66309
$350
SIZE
CAT #
12” x .125 x UNV
H8HU
H8XU
12” x .125 x UNV
66306
$323
12” x .125 x UNV
14” x .125 x UNV
66307
363
14” x .125 x UNV
66310
396
16” x .125 x UNV
66308
449
16” x .125 x UNV
66311
481
H10HU
H10XU
12” x .125 x UNV
78768
$323
12” x .125 x UNV
68680
$350
14” x .125 x UNV
78769
363
14” x .125 x UNV
70172
396
16” x .125 x UNV
78770
449
16” x .125 x UNV
78764
481
The Cut-all split segment
Creates a larger Weld surface,
offering Double the Weld
strength Than Conventional
split segment Blades
High speed blades have a drive
pin hole for use on small low
horsepower walk behind saws
The Wide spaced Gullets allow less
surface-to-surface Contact
and a Faster Cut!
For use on high speed, masonry
and low HP walk behind saws
30
High Quality Blades for Unique applications
The Cut-all split segment
Creates a larger Weld surface,
offering Double the Weld
strength Than Conventional
split segment Blades
imperial Purple
H8CA
Cat #
List Price
12” x .125 x UNV
84967
$453
14” x .125 x UNV
84968
16” x .125 x UNV
SIZE
• High speed blade with split segment
design cuts cured and green concrete, brick
and block, paver block, stone, precast,
ductile iron and asphalt. This is best suited
for harder materials.
SIZE
H8ICA
Cat #
List
Price
567
12” x .125 x UNV
15372
$413
84969
623
14” x .125 x UNV
15373
480
18” x .125 x 1”
86709
737
16” x .125 x 1“
15375
548
20” x .125 x 1”
84970
851
20 x .140 x 1”
86633
954
Cut-all 5-PaCKs
12” x .125 x UNV
84989
$2,175
14” x .125 x UNV
84990
2,719
UNV = 1” and 20 mm universal arbor.
High speed blades have a drive pin hole
for use on small low HP walk behind saws
• Great for the general contractor or
landscaper whose job is different everyday.
• Split segment removes slurry more
efficiently for faster and more economical
cutting.
• Diamond depth: .310” (H8CA), .354” (H8ICA)
• Segment height: .460” (H8CA), .433”
(H8ICA)
For use on high speed, masonry and low HP walk behind saws
FiBeR CemenT BoaRD BlaDe
• Designed for stacked sheet cutting of fiber cement board
• Four segments made with polycrystalline
synthetic diamonds
• Outlasts several carbide-tipped blades
Fiber Cement Board Blade
SIZE
7-1/4” x 085 x 7/8”
Cat #
71787
List Price
$117
Runs on Cordless, Portable electric,
Table and miter Radial saws
31
DiamonD BlaDes
HiGH sPeeD sPeCialTY BlaDes
HiGH sPeeD sPeCialTY BlaDes
DiamonD BlaDes
High Quality Blades for Unique applications
Cuts everything from a to Z
• Vacuum bonded technology - diamonds are adhered to
the gullets
• Great for rescue and emergency situations
• Cuts a wide range of materials - from A2Z
• Holes in the ‘segments’ help with cooling while cutting
metal and other heat generating materials
• Electroplated diamond technology
• Fast cutting through thin gauge studs and plastics
• 100% diamond exposure doesn’t require sharpening
• Segmented core to keep the blade cool while cutting
• Good quality diamonds for long life cutting
Not suitable for wood applications
a2Z Vacuum Bonded Blade
SIZE
4-1/2” x .080 x 7/8”
6” x .090 x 7/8”
7” x .095 x 7/8”
12” x .125 x 1”
14” x .125 x 1”
16” x .125 x 1”
T7AZ Cat #
21511
13565
21531
21535
21571
21576
For Use on Thin Gauge metal studs
not recommended for steel plate or concrete
List Price
$114
138
181
358
406
535
stud-Cut Blade
SIZE
Cat #
List Price
14” x .125 x 1”
91594
$420
7/8” arbor blades include 5/8” bushing
Ductile iron Blade
• Ideal for cutting ductile iron and thin gauge
metal drywall studs
• Turbo-style segment design
• Abrasive material adhered to the core to help
prevent metal burrs
Ductile iron Blade
SIZE
12” x .125 x UNV
14” x .125 x UNV
16” x .125 x UNV
20” x .155 x 1”
DI7H Cat #
71508
68000
94342
77634
List Price
$251
306
350
894
• Carbide-tipped for metals, roofing and building materials,
wood, tar, fire doors, plastic and rubber.
Not suitable for concrete.
• For use ONLY on saws with retractable blade guards.
• Made with .250” thick carbide chunks that allow
extremely fast cutting that will not bind or load
(an important factor in rescue cutting).
*Warning: When sawing, dust
and material particles will be
common as this product is very
aggressive. Wear protective
safety equipment when using
and handling this blade. Blade
edges are very sharp. Must be
used with a retractable blade
guard saw. Do not exceed saw
manufacturer recommended RPM.
Periodic inspections are required
to insure proper condition. Never
use damaged or cracked blades.
Please consult warning sheet
provided with blade.
32
Demo-Cut Blade
SIZE
Cat #
List Price
4-1/2” x .150 x 5/8”
4-1/2” x .250 x 5/8”
7” x .150 x 5/8”
7” x .250 x 5/8”
12” x .250 x 1”
14” x .250 x 1”
16” x .250 x 1”
18” x .250 x 1”
20” x .250 x 1”
08425
08424
04610
04613
96301
96302
26491
05347
04286
$243
303
386
441
561
674
1,036
1,166
1,517
TURBo BlaDes
Delux-Cut
star Blue
• Basic quality diamond and economical cutting value
SIZE
T7D
Cat #
T7D
List Price
4” x .080 x 7/8”
4-1/2” x .080 x 7/8”
5” x .080 x 7/8”
6” x .080 x 7/8”
7” x .095 x 7/8”
8” x .095 x 7/8”
9” x .095 x 7/8”
10” x .110 x 1”
12” x .125 x 1”
14” x .125 x 1”
21124
21134
21139
21141
21163
21183
21203
21204
21205
21212
$14
16
23
28
34
40
55
73
105
132
DiamonD BlaDes
High Quality Blades with Turbo Design for Fast Cutting
• Good quality diamond and good cutting value
T7D
5-pack
Cat #
T7D
5-pack
List Price
21242
21288
21289
21308
21318
$69
79
109
134
163
21220
21229
505
632
SIZE
T7B
Cat #
List Price
4” x .080 x 7/8”
4-1/2” x .080 x 7/8”
5” x .080 x 7/8”
6” x .080 x 7/8”
7” x .095 x 7/8”
8” x .095 x 7/8”
9” x .095 x 7/8”
10” x .110 x 1”
12” x .125 x 1”
14” x .125 x 1”
74959
74960
80002
80003
74961
80004
80005
80006
74962
74964
$19
21
30
35
42
50
68
93
132
164
T7B
5-pack
Cat #
T7B
5-pack
List Price
76589
76590
$89
99
76591
203
84981
84983
632
786
UNV = 1” and 20 mm
universal arbor
standard Gold
imperial Purple
• Better quality diamond and better cutting value
SIZE
T7S
Cat #
4” x .080 x 7/8”
12480
4-1/2” x .080 x 7/8”
12483
5” x .080 x 7/8”
12486
6” x .080 x 7/8”
12487
7” x .095 x 7/8”
12489
8” x .095 x 7/8”
12493
9” x .095 x 7/8”
12494
10” x .110 x 1”
12495
12” x .125 x UNV
58454
14” x .125 x UNV
58455
16” x .125 x 1”
14527
20” x .140 x 1”
15584
5-Packs - T7s
4” x .080 x 7/8”
55237
4-1/2” x .080 x 7/8”
55238
7” x .095 x 7/8”
55239
• Better quality diamond and very good cutting life
List
Price
$41
49
68
76
82
99
166
220
251
284
321
509
$198
237
396
SIZE
T7I
Cat #
T7I
List Price
T7I
5-pack
Cat #
T7I 5-Pack
List Price
12” x .125 x 1”
14” X .125 X 1”
79952
79953
$280
392
84987
84988
$1,345
1,884
• T7I blades have a built-in wear retardant to extent the life of the blade
Turbo blades offer a faster cut than segmented blades due to the
serrated segment design, allowing less surface-to-surface contact.
Blades 4”, 4-1/2”& 7”used
on right angle grinders
T7=
Blades 4”to 10”used Blades 12” & 14” used on high
speed and masonry saws
on circular saws
General
Purpose
Cutting
33
Dry cutting
products
can be used
with water
TURBo BlaDes
DiamonD BlaDes
High Quality Blades with Turbo Design for Fast Cutting
Heavy Duty orange Turbo
Premium Black Turbo
• Very high quality diamond and longer cutting life
T7H
Cat #
4” x .080 x 7/8”
12281
4-1/2” x .080 x 7/8”
12286
5” x .080 x 7/8”
12290
6” x .080 x 7/8”
12292
7” x .095 x 7/8”
12298
8” x .095 x 7/8”
12309
9” x .095 x 7/8”
12312
10” x .110 x 1”
12315
12” x .125 x UNV
53862
14” x .125 x UNV
53863
16” x .125 x 1”
12336
16” x .125 x 20mm
28824
20” x .140 x 1”
12338
5-Pack Turbo - T7H
4” x .080 x 7/8”
55240
4-1/2” x .080 x 7/8”
55241
7” x .095 x 7/8”
55242
SIZE
• Highest quality diamond and longest cutting life
List
Price
$102
131
161
179
184
236
285
337
378
445
556
556
695
SIZE
4” x .080 x 7/8”
4-1/2” x .080 x 7/8”
5” x .080 x 7/8”
6” x .080 x 7/8”
7” x .095 x 7/8”
8” x .095 x 7/8”
9” x .095 x 7/8”
10” x .110 x 1”
12” x .125 x UNV
14” x .125 x UNV
16” x .125 x 1”
16” x .125 x 20mm
20” x .140 x 1”
T7P
Cat #
12392
12393
12394
12395
12396
12397
12398
33578
59558
50282
12406
70589
12408
List
Price
$143
186
226
253
263
336
406
483
520
701
819
819
1,261
$489
628
885
super High segments
Turbo blades offer a faster cut than segmented
blades due to the serrated segment design,
allowing less surface-to-surface contact.
super H.D. silver Turbo
• Very high quality diamond and super long cutting life
SIZE
Blades 4” to 10”
used on circular
saws
T7=
Blades 4”, 4-1/2”
& 7” used on right
angle grinders
General
Purpose
Cutting
12” x .125 x UNV
14” x .125 x UNV
Blades 12” & 14” used
on high speed and
masonry saws
Dry cutting
products
can be used
with water
34
T7SH
Cat #
64360
59517
List
Price
$567
694
special Turbo Designs for effective Cutting
Premium T-seg Turbo Blades
Specification: T7 - General Purpose in Hard Materials
For use on a variety of saws including: high speed,
electric circular, tile, masonry and block saws
SIZE
TS7P Cat #
List Price
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
5” x .075 x 7/8
6” x .080 x 7/8”
7” x .090 x 7/8”
8” x .095 x 7/8”
9” x .095 x 7/8”
10” x .095 x 7/8”
12” x .125 x 1”
14” x .125 x 1”
73958
73959
73960
73961
73962
73964
73965
73966
74610
74612
$54
58
64
84
97
115
141
161
287
375
Premium T-seg Turbo 5-Packs
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
5” x .075 x 7/8”
6” x .080 x 7/8”
7” x .090 x 7/8”
8” x .095” x 7/8”
9” x .095 x 7/8”
10” x .095 x 7/8”
12” x .125 x 1”
14” x .125 x 1”
Premium T-seg Turbo
•
•
•
•
General purpose cutting in concrete and masonry
Special T-Segment offers built-in core protection
Turbo style serrated segments give a fast cut
Blades 7” and above come with a 7/8” bushing
(removable) in a diamond arbor
• Blades below 7” come with a 7/8” round arbor
74142
74143
74144
74145
74146
74148
74149
74150
74615
74617
$258
277
307
406
465
554
678
771
1,379
1,799
For use on electric circular saws - up to 9” diameter.
12” and 14” use on high speed saws.
Dry cutting
products
can be used
with water
shock Wave Blue
• Wavy core enhances cutting speed
• Continuous rim turbo style for a
smooth cut
• Long cutting life
shock Wave Blue
Turbo Blades
SIZE
4” x .085 x 7/8”
4-1/2” x .085 x 7/8”
7” x .085 x 7/8”
T7SWB
Cat #
18007
18008
18009
List
Price
$31
35
71
Xl-Turbo Blade
shock Wave White
• Wavy core enhances cutting speed
• Continuous rim turbo style for a
smooth cut
• Longer cutting life
shock Wave White
Turbo Blades
T7SWW
Cat #
4” x .095 x 7/8”
18010
4-1/2” x .100 x 7/8” 18011
7” x .110 x 7/8”
18012
SIZE
For use on electric
circular saws and right
angle grinders
• Unique turbo core with enhanced air
holes to keep the blade cool at high
speeds
• General purpose, super fast cutting good blade cutting life
Xl-Turbo Blades
List
Price
$41
48
98
SIZE
T7XLCat #
List Price
12” x .125 x 1”
19311
$298
14” x .125 x 1”
19312
353
16” x .125 x 1”
20161
414
20” x .125 x 1”
20183
569
1” arbor blades come with a 20mm bushing
35
DiamonD BlaDes
sPeCialTY TURBo BlaDes
HiGH PeRFoRmanCe TURBo BlaDes
DiamonD BlaDes
segmented Turbo Design for an even Faster, long life Cut
star Blue H.P. Turbo
standard Gold H.P. Turbo
• Very fast cutting
• Basic blade life
• Very fast cutting
• Better blade life
star Blue H.P. Turbo
standard Gold H.P. Turbo
SIZE
HPT7B Cat #
List Price
SIZE
HPT7S Cat #
List Price
4” x .080 x 7/8”
87986
$43
4” x .080 x 7/8”
11703
$74
4-1/2” x .080 x 7/8”
88004
66
4-1/2” x .080 x 7/8”
11704
97
7” x .095 x 7/8” *
88020
109
5” x .080 x 7/8”
28247
135
12” x .125 x 1”
88053
224
6” x .080 x 7/8”
19906
141
14” x .125 x 1”
88056
247
7” x .095 x 7/8”
11705
151
20” x .140 x 1”
88060
505
8” x .095 x 7/8”
11707
188
9” x .095 x 7/8”
22322
232
10” x .110 x 1”
11708
255
12” x .125 x UNV
58452
295
14” x .125 x UNV
58453
330
16” x .125 x 1”
28654
405
18” x .125 x 1”
14072
466
20” x .140 x 1”
11715
572
24” x .125 x 1”
09723
952
24” x .140 x 1”
34336
952
* 7/8” bushing (removable) with diamond arbor
standard Gold H.P. Turbo 5-Packs
used on circular
saws
HPT7=
Blades 4”, 4-1/2”
angle grinders
Blades 12” & 14” used
on high speed and
masonry saws
4” x .080 x 7/8”
57939
$356
4-1/2” x .080 x 7/8”
57941
465
7” x .095 x 7/8”
57943
727
1” arbor blades come with 20mm bushing
General
Purpose
Cutting
Dry cutting
products
can be used
with water
• Segmented core with serrated turbo-style diamond segments
allow a faster cut due to less surface-to-surface contact
• Faster cutting than traditional continuous rim turbo blades
• Dry blades that can also be used with water for cooling
36
HiGH PeRFoRmanCe TURBo BlaDes
Heavy Duty orange H.P. Turbo
Premium Black H.P. Turbo
• Better quality for very fast cutting in general
purpose - hard materials, pavers, hard brick/
block and stone
• Longer blade life
• Best quality for very fast cutting in general
purpose - hard materials, pavers, hard brick/
block and stone
• Longest blade life
Heavy Duty orange H.P. Turbo
SIZE
HPT5H Cat # HPT7H Cat #
4” x .080 x 7/8”
4-1/2” x .080 x 7/8”
5” x .080 x 7/8”
6” x .080 x 7/8”
7” x .095 x 7/8”
8” x .095 x 7/8”
9” x .095 x 7/8”
10” x .110 x 1”
12” x .125 x UNV
14” x .125 x UNV
16” x .125 x UNV
18” x .125 x 1”
20” x .125 x 1”
20” x .140 x 1”
24” x .140 x 1”
23909
25669
42803
94460
35586
16777
16776
26574
59995
59890
29711
71056
56521
24198
27664
Premium Black H.P. Turbo
List Price
11637
11639
11641
11642
11643
11645
11646
11648
58210
58451
33372
11677
37682
11678
76645
$93
114
150
164
180
226
261
296
350
396
481
552
613
686
981
Heavy Duty orange H.P. Turbo 5-Packs
4” x .080 x 7/8”
57940
4-1/2” x .080 x 7/8”
57942
7” x .095 x 7/8”
57944
SIZE
4” x .080 x 7/8”
7” x .095 x 7/8”
8” x .095 x 7/8”
10” x .110 x 1”
12” x .125 x UNV
14” x .125 x UNV
16” x .125 x 1”
18” x .125 x 1”
18” x .140 x 1”
20” x .140 x 1”
24” x .140 x 1”
Blades 4”, 4-1/2”
angle grinders
HPT5
Hard, Reinforced Concrete
88284
17236
30995
80973
65113
27120
03633
11694
15856
52852
19688
11682
11683
79607
59335
11692
11693
22472
13816
48757
$127
222
277
412
422
481
547
902
904
984
1,144
super High segments
super Heavy Duty silver
• Higher segment height with Heavy
Duty quality diamonds for very fast cutting in
general purpose - hard materials, pavers, hard
brick/block and stone
• Super Extended life
Blades 12” & 14” used on high
speed and masonry saws
super Heavy Duty silver H.P. Turbo
HPT7
General Purpose
HPT5P Cat # HPT7P Cat # List Price
$445
549
865
For use on high speed and masonry saws
used on circular
saws
DiamonD BlaDes
segmented Turbo Design for an even Faster, long life Cut
SIZE
Dry cutting products
can be used with water
37
12” x .125 x UNV
14” x .125 x UNV
16” x .125 x 1”
18” x .125 x 1”
20” x .140 x 1”
HPT5SH
12509
63332
60790
81633
HPT7SH Cat # List Price
61048
58891
57928
79616
59679
$462
567
611
611
854
DiamonD BlaDes
small DiameTeR seGmenTeD BlaDes
Dry Cutting Blades for electric Circular saws and Right angle Grinders
Delux-Cut
star Blue
Delux-Cut
SIZE
E2D Cat #
4” x .080 x 7/8”
20966
4-1/2” x .080 x 7/8”
21002
5” x .080 x 7/8”
22729
6” x .080 x 7/8”
22783
7” x .080 x 7/8”
22785
8” x .080 x 7/8”
22802
9” x .080 x 7/8”
22820
e2D - 10 Packs
4” x .080 x 7/8”
21003
4-1/2” x .080 x 7/8”
21016
star Blue
List Price
$13
15
22
28
31
35
40
SIZE
E2B Cat #
4” x .070 x 7/8”
74950
4-1/2” x .070 x 7/8”
74951
5” x .080 x 7/8”
70461
6” x .080 x 7/8”
70470
7” x .080 x 7/8”
74952
8” x .080 x 7/8”
74953
9” x .080 x 7/8”
70494
e2B - 10 Packs
4” x .070 x 7/8”
42196
4-1/2” x .070 x 7/8”
42201
$129
148
List Price
$16
20
28
34
38
43
49
$159
187
specifications:
e2 - Hard materials - concrete
e5 - soft, abrasive materials - asphalt, block
standard Gold
• Better quality diamond and
better cutting value
SIZE
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
5” x .080 x 7/8”
5-1/2” x .080 x 7/8”
6” x .080 x 7/8”
7” x .080 x 7/8”
8” x .080 x 7/8”
9” x .095 x 7/8”
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
7” x .080 x 7/8”
E2S Cat #
11344
11347
11350
17232
11352
11355
11359
95049
5-Packs
57953
57954
57955
E5S Cat #
11346
11349
11351
28289
16866
11357
11360
95050
List Price
55256
55258
55260
$217
247
371
$45
52
59
70
75
77
89
106
38
For use on electric circular saws
and side grinders
Dry cutting
products
can be used
with water
small DiameTeR seGmenTeD BlaDes
X-Tra Plus Red
Heavy Duty orange
• Higher quality diamond and long cutting life
SIZE
X-Tra Plus Red
DiamonD BlaDes
Dry Cutting Blades for electric Circular saws and Right angle Grinders
Heavy Duty orange
E2X Cat #
E5X Cat #
List Price
SIZE
E2H Cat #
E5H Cat #
List Price
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
5” x .080 x 7/8”
5-1/2” x .080 x 7/8”
6” x .080 x 7/8”
7” x .080 x 7/8”
8” x .080 x 7/8”
9” x .080 x 7/8”
11366
11370
11374
28290
11378
11380
11383
11387
11368
11373
11375
11376
11379
11381
11386
11388
$65
83
85
102
110
114
134
175
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
5” x .080 x 7/8”
5-1/2” x .080 x 7/8”
6” x .080 x 7/8”
7” x .080 x 7/8”
8” x .080 x 7/8”
9” x .080 x 7/8”
11242
11249
11257
16300
11263
11268
11290
11297
11244
11253
11259
11260
11264
11274
11293
11302
$85
105
107
122
130
137
156
232
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
7” x .080 x 7/8”
55261
55263
55265
55262
55264
55266
$311
401
549
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
7” x .080 x 7/8”
55267
55270
55272
55268
55271
55273
$410
505
657
5-Packs
5-Packs
specifications:
e2 - Hard materials - concrete
e5 - soft, abrasive materials - asphalt, block
Premium Black
• Highest quality diamond and
longest cutting life
SIZE
Premium Black
E2P Cat # E5P Cat #
List Price
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
5” x .080 x 7/8”
5-1/2” x .080 x 7/8”
6” x .080 x 7/8”
7” x .080 x 7/8”
8” x .080 x 7/8”
9” x .080 x 7/8”
11304
11307
11310
18197
11315
11319
11338
11340
11305
11308
11311
11312
11316
11322
11339
11342
$103
119
123
160
170
182
215
282
4” x .070 x 7/8”
4-1/2” x .070 x 7/8”
7” x .080 x 7/8”
55274
55276
55278
55275
55277
55279
$494
574
876
5-Packs
For use on electric circular saws
and side grinders
Dry cutting
products
can be used
with water
39
masonRY BlaDes
DiamonD BlaDes
Dry & Wet Blades for Brick & Block applications
Delux-Cut
star Blue
Delux-Cut masonry
SIZE
12” x .110 x 1”
14” x .125 x 1”
18” x .125 x 1”
20” x .125 x 1”
DM85D Cat #
20887
20888
20908
20924
star Blue masonry
SIZE
12” x .110 x 1”
14” x .125 x 1”
18” x .125 x 1”
20” x .125 x 1”
List Price
$88
93
269
357
DM85B Cat #
70504
70520
20649
20651
List Price
$102
108
315
419
masonry Blade specifications:
DM80 - Hard materials, hard brick - fast cutting
DM85 - General purpose, combo brick/block
DM86 - Combo brick/block
DM87 - Abrasive brick/block
standard Gold
standard Gold masonry
SIZE
DM80S
Cat #
DM85S
Cat #
DM86S
Cat #
DM87S
Cat #
List
Price
10” x .110 x 1”
11947
11948
11949
11950
$283
12” x .110 x 1”
11952
11954
11955
11956
335
14” x .110 x 1”
11959
11961
11964
11965
386
14” x .125 x 1”
22087
18360
36413
30441
451
16” x .125 x 1”
76800
74823
76801
11968
505
18” x .125 x 1”
28288
11973
11974
20122
554
20” x .125 x 1”
11976
11977
11978
11979
680
24” x .140 x 1”
40793
40794
40795
40796
884
40
For use on masonry
and block saws
Dry cutting
products
can be used
with water
masonRY BlaDes
Heavy Duty orange
DiamonD BlaDes
Dry & Wet Blades for Brick & Block applications
Premium Black
• Highest quality diamond and longest cutting life
Heavy Duty orange masonry
Premium Black masonry
SIZE
10” x .110 x 1”
12” x .110 x 1”
14” x .110 x 1”
14” x .125 x 1”
16” x .125 x 1”
18” x .125 x 1”
20” x .125 x 1”
24” x .140 x 1”
DM80H DM85H
Cat #
Cat #
DM86H
Cat #
DM87H
Cat #
List
Price
SIZE
DM80P
Cat #
DM85P
Cat #
DM86P
Cat #
DM87P
Cat #
List
Price
11817
11825
11847
11859
21697
11879
11893
40797
11820
11828
11853
11862
21421
11883
11897
40799
11821
11829
11855
11864
46214
11884
11898
40800
$372
452
523
580
634
725
832
1,053
10” x .110 x 1”
12” x .110 x 1”
14” x .110 x 1”
14” x .125 x 1”
16” x .125 x 1”
18” x .125 x 1”
20” x .125 x 1”
24” x .140 x 1”
11904
11908
11917
22109
11930
18611
11940
40801
11905
11909
11920
14644
11931
11935
11942
40802
11906
11910
11921
11925
38115
11936
11943
40803
11907
11911
11922
21993
53034
11937
11944
51752
$424
484
610
677
836
846
1,043
1,185
11819
11827
11850
11861
11876
11881
11895
40798
masonry Blade specifications:
DM80 - Hard materials, hard brick - fast cutting
DM85 - General purpose, combo brick/block
DM86 - Combo brick/block
DM87 - Abrasive brick/block
For use on masonry
and block saws
silenT CoRe masonRY BlaDes
Laser cut
harmonic dampeners
reduce vibration.
Noise is reduced
by -10dB
Special laser anchor slots
near the segments provide
for increased noise reduction
Heavy Duty orange silent Core masonry
SIZE
14” x .125 x 1”
18” x .125 x 1”
20” x .140 x 1”
24” x .140 x 1”
DM80HSC DM85HSC DM86HSC DM87HSC
Cat #
Cat #
Cat #
Cat #
66587
66637
66638
66669
66644
66645
66646
66647
66648
32040
66650
66651
66652
66653
66654
66655
Premium Black silent Core masonry
List Price
SIZE
DM80PSC
Cat #
DM85PSC
Cat #
$678
1,093
1,100
1,505
14” x .125 x 1”
18” x .125 x 1”
20” x .140 x 1”
24” x .140 x 1”
66640
66641
66642
66643
66656
66657
10099
66659
41
DM86PSC DM87PSC
Cat #
Cat #
66660
66661
66662
66663
66664
66665
66666
66667
List Price
$810
1,101
1,280
1,566
DiamonD BlaDes
TUCK PoinT BlaDes Dry Cutting Blades for Tuck Pointing in mortar Joints
3-in-1
2-in-1
For use on electric circular
saws and side grinders
Delux-Cut
cutting value
Delux-Cut Tuck Point Blades
DT9D Cat #
List Price
SIZE
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
7” x .250 x 7/8”
21065
21072
21074
$48
53
124
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
7” x .250 x 7/8”
21090
21096
21108
$233
252
593
Delux-Cut Tuck Point - 5-Pack
star Blue
• 2-in-1 for faster cutting
• 3-in-1 for faster cutting and a wider cut
star Blue Tuck Point Blades
DT9B Cat #
List Price
SIZE
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
5” x .250 x 7/8”
7” x .250 x 7/8”
74966
74967
51438
74968
$61
65
79
156
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
7” x .250 x 7/8”
76592
76593
76594
$291
311
747
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
5” x .250 x 7/8”
7” x .250 x 7/8”
20790
22691
07916
51191
$87
89
103
144
4” x .375 x 7/8”
4-1/2” x .375 x 7/8”
79892
79893
$141
150
star Blue Tuck Point - 5-Pack
star Blue 2-in-1 Tuck Point Blades
Dry cutting
products
can be used
with water
star Blue 3-in-1 Tuck Point Blades
3-in-1
2-in-1
Utility Green
• Very good quality diamond and very
good cutting value
• 2-in-1 for a faster cut
• 3-in-1 for faster cutting and a wider cut
Utility Green Tuck Point Blades
SIZE
DT9G Cat #
List
Price
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
5” x .250 x 7/8”
7” x .250 x 7/8”
94186
94187
96364
25953
$81
106
141
180
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
31807
20207
4” x .375 x 7/8”
4-1/2” x .375 x 7/8”
5” x .375 x 7/8”
94183
94184
94185
standard Gold
cutting value
standard Gold Tuck Point Blades
SIZE
DT9S Cat #
List
Price
$87
102
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
5” x .250 x 7/8”
7” x .250 x 7/8”
8” x .250 x 7/8”
12462
12466
12470
12475
12476
$179
187
192
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
7” x .250 x 7/8
55225
55226
55227
Utility Green 2-in-1 Tuck Point Blades
Utility Green 3-in-1 Tuck Point Blades
5-Packs
Heavy Duty orange
longer cutting life
Heavy Duty orange Tuck Point Blades
SIZE
DT9H Cat #
List
Price
$144
166
188
273
296
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
5” x .250 x 7/8”
7” x .250 x 7/8”
8” x .250 x 7/8”
12418
12429
12437
12446
12454
$190
216
243
348
397
$692
796
1,310
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
7” x .250 x 7/8
55228
55229
55230
$909
1,038
1,671
specification: DT9 - General purpose tuck pointing in mortar joints
42
5-Packs
sPeCialTY TUCK PoinT & V-CRaCK BlaDes
DiamonD BlaDes
Unique Products for specific applications
Tuck Point blades can be fitted with a
diamond shaped arbor. Extra charge for
diamond arbors (tuck point blades) $15.00
staggered
segments
for
Faster
Cutting
•
•
•
•
Your choice of
5/16” or 1/4” shafts.
Heavy Duty orange High Performance
Vertical Tuck Point Pins
Very high quality diamond and longer cutting life
General purpose - longer life
Super-fast cutting due to less surface to surface contact
For use on circular saws and right angle grinders
• Great for cleaning out mortar from hard to
reach joints and butt (vertical) joints
• Grinds out butt joints in seconds without
damaging existing blocks
• For use on basic router machines
Heavy Duty orange High Performance
Tuck Point Blades
Heavy Duty orange Vertical Tuck Point Pins
SIZE
HPDT9H Cat #
List Price
SIZE
VT2H Cat #
List Price
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
5” x .250 x 7/8”
7” x .250 x 7/8”
8” x .250 x 7/8”
11697
11698
11700
11702
16638
$285
314
325
499
538
1/4” Diameter
12524
$104
3/8” Diameter
12529
129
93788
104
93789
129
55280
55360
55361
$1,370
1,508
2,393
5-Packs
4” x .250 x 7/8”
4-1/2” x .250 x 7/8”
7” x .250 x 7/8
Delux-Cut V-Crack
1/4” Diameter
with 1/4” Shaft
3/8” Diameter
with 1/4” Shaft
star Blue V-Crack
• Basic quality diamond and
economical cutting value
• Good quality diamond and
good cutting value
Delux-Cut V-Crack Blades
star Blue V-Crack Blades
SIZE
V2D Cat #
4”
21118
7”
21122
Heavy Duty V-Crack
longer cutting life
Heavy Duty orange V-Crack Blades
SIZE
V2B Cat #
List Price
SIZE
V2H Cat #
List Price
$141
4”
02739
$176
4”
27542
$311
265
7”
02746
331
7”
26719
491
7”
with diamond arbor
97808
580
List Price
Note: 5/8”-11 hub unless otherwise noted
all V-Crack Blades:
• Cleans, routs and repairs cracks in concrete and other materials
• Fast cutting while leaving a clean groove
• Segment design provides longer life
• Segment width .310 at the widest point
• For use on right angle grinders
43
5-Packs
4”
55223
$1,494
7”
55224
2,359
DiamonD BlaDes
CUP GRinDeRs
single and Double Row segmented
Delux-Cut
star Blue
• Basic quality diamond and economical grinding value
• Good quality diamond and good grinding value
single Row - s5D
single Row - s5B
Double Row - D5D
Double Row - D5B
• General grinding
and removal
and removal
and removal with
a smooth finish
and removal with
a smooth finish
Delux-Cut segmented Cup Grinders
star Blue segmented Cup Grinders
SIZE/DESCRIPTION
SPEC
Cat #
List
Price
SIZE/DESCRIPTION
SPEC
Cat #
List
Price
4” x 5/8-11 Single Row
S5D
22405
$44
S5B
77383
$56
4-1/2” x 5/8-11 Single Row
S5D
22406
55
4-1/2” x 5/8-11 Single Row
S5B
77502
68
S5D
22408
84
S5B
77542
105
4” x 5/8-11 Double Row
D5D
22410
74
D5B
70360
$94
4-1/2” x 5/8-11 Double Row
D5D
22415
84
4-1/2” x 5/8-11 Double Row
D5B
70387
105
D5D
22418
110
D5B
70391
138
Utility Green
• Very good quality diamond and very good grinding value
Utility Green segmented Cup Grinders
single Row - s5G
and removal
SIZE/DESCRIPTION
SPEC
Cat #
List
Price
S5G
94177
$80
S5G
94178
152
D5G
94175
128
D5G
94176
211
Double Row - D5G
and removal with a
smooth finish
For use on right
angle grinders
Dry cutting
products
can be used
with water
44
CUP GRinDeRs
DiamonD BlaDes
single and Double Row segmented
standard Gold
• Better quality diamond and better grinding value
single Row - s5s
• Heavy removal
Ring style - R5s
Double Row - D5s
• Continuous ring for
• General grinding with smooth finish
• Heavy removal
smooth grinding
standard Gold segmented Cup Grinders
SIZE/DESCRIPTION
SPEC
Cat #
List Price
S5S
07442
$105
S5S
28508
152
S5S
07450
180
4” x 5/8-11 Ring Style
R5S
07439
$169
D5S
07429
$166
D5S
07431
210
D5S
07434
235
Heavy Duty orange
• Very high quality diamond and longer life
single Row - s5H
• Heavier removal
Ring style - R5H
Double Row - D5H
• Continuous ring for
• General grinding with smooth finish
• Heavier removal
smooth grinding
Heavy Duty orange segmented Cup Grinders
SIZE/DESCRIPTION
SPEC
Cat #
List Price
S5H
00015
$156
S5H
07404
199
S5H
00017
280
4” x 5/8-11 Ring Style
R5H
07385
$298
D5H
00016
$235
D5H
07370
285
D5H
00018
384
45
For use on right
angle grinders
Dry cutting
products
can be used
with water
TURBo CUP GRinDeRs
DiamonD BlaDes
angled segments for Faster Grinding
Segmented
Segmented
Ring Style
Delux-Cut
Ring Style
star Blue
• Spiral turbo for a fast grind
• Basic quality
• Try the ring style for a smoother finish
• General grinding and removal
• Try the ring style for a smoother finish
Delux-Cut spiral Turbo
Cup Grinders
star Blue spiral Turbo
Cup Grinders
SIZE
T5D Cat#
List Price
SIZE
T5B Cat #
List Price
4” x 5/8-11 (10 seg)
22419
$50
4” x 5/8-11 (10 seg)
00036
$63
4-1/2”x5/8-11(12 seg)
22435
57
4-1/2”x5/8-11(12 seg)
90079
71
7” x 5/8-11 (12 seg)
22474
80
7” x 5/8-11 (12 seg)
90193
112
7” x 5/8-11 (24 seg)
22453
130
7” x 5/8-11 (24 seg)
90359
163
Delux-Cut Ring Turbo Cup Grinders
star Blue Ring Turbo Cup Grinders
4” x 5/8-11 (RT5D)
22457
$106
4” x 5/8-11 (RT5B)
04098
$133
7” x 5/8-11 (RT5D)
22464
216
7” x 5/8-11 (RT5B)
04099
270
For use on right
angle grinders
Utility Green
Dry cutting
products
can be used
with water
• General grinding and removal
• Good life
Utility Green spiral Turbo Cup Grinders
SIZE
T5G Cat #
List Price
4” x 5/8-11 (9 seg)
4” x 7/8” (9 seg)
4” x 5/8-11 (18 seg)
4” x 7/8” (18 seg)
4-1/2” x 5/8-11 (9 seg)
4-1/2” x 7/8” (9 seg)
4-1/2” x 5/8-11 (18 seg)
4-1/2” x 7/8” (18 seg)
5” x 5/8-11 (14 seg)
5” x 7/8” (14 seg)
7” x 5/8-11 (12 seg)
7” x 7/8” (12 seg)
7” x 5/8-11 (24 seg)
7” x 7/8” (24 seg)
94133
94134
94127
94128
94131
94132
94129
94130
09793
96471
94135
94136
94137
94138
$78
78
128
128
89
89
144
144
162
162
177
177
255
255
standard Gold
• General grinding and medium removal
• Better life
standard Gold spiral Turbo
Cup Grinders
46
SIZE
T5S
Cat #
List Price
4” x 5/8-11 (9 seg)
17846
$160
4” x 7/8” (9 seg)
23177
160
4” x 5/8-11 (10 seg)
59574
185
4” x 7/8” (10 seg)
76901
185
7” x 5/8-11 (12 seg)
16410
225
7” x 7/8” (12 seg)
17834
225
7” x 5/8-11 (24 seg)
15263
342
7” x 7/8” (24 seg)
18641
342
TURBo CUP GRinDeRs
Heavy Duty orange
Premium Black
• General grinding and heavy removal
• Spiral turbo for fast, aggressive grinding
• Very high quality diamond and longer grinding life
• General grinding and heavier removal
• Spiral turbo for fast, aggressive grinding
• Highest quality diamond and longest grinding life
Heavy Duty orange spiral Turbo
Cup Grinders
SIZE
4” x 5/8-11 (9 seg)
4” x 7/8” (9 seg)
5” x 5/8-11 (12 seg)
5” x 7/8” (12 seg)
7” x 5/8-11 (12 seg)
7” x 7/8” (12 seg)
7” x 5/8-11 (24 seg)
7” x 7/8” (24 seg)
T5H Cat #
17943
20710
69357
78871
15095
18155
15096
18396
DiamonD BlaDes
angled segments for Faster Grinding
Premium Black spiral Turbo
Competition style
List Price
$242
242
310
310
329
329
657
657
SIZE
6” (14 seg)
with special 3/4” arbor
6” (14 seg)
with 5/8-11 hub
T5P Cat #
List Price
22537
$611
43715
611
Dry Ring Cup Grinders
• 3 bonds to fit your application
• Fine grit - smoothest finish
• Medium grit - basic grinding and removal
• Coarse grit - heavy aggressive removal
PCD Cup Grinders
• Poly Crystalline Diamond allows aggressive removal
of glue and epoxy
Dry Ring Cup Grinders
SIZE
GRIT
PCD Cup Grinders
BOND
Cat #
List Price
4” x 7/8”
Fine
KT5HF
35645
$261
4” x 7/8”
Medium
KT5HM
26060
274
4” x 7/8”
Coarse
KT5HC
23329
285
4” x 5/8-11
Fine
KT5HF
19546
261
4” x 5/8-11
Medium
KT5HM
17539
274
4” x 5/8-11
Coarse
KT5HC
23051
285
7” x 5/8-11
Coarse
KT5HC
23154
513
SIZE
CAT #
Application
List Price
4-1/2” x 5/8-11 14986 General Purpose epoxy removal
7” x 5/8-11
21715 General Purpose epoxy removal
For use on right angle grinders
47
$310
387
Dry cutting
products
can be used
with water
loW PRoFile CUP GRinDeRs
DiamonD BlaDes
for low Profile Grinding machines
Standard Gold Bond Specification:
S33S2530
Grinding Medium to Hard Concrete
Better quality diamond and better grinding value
Heavy Duty Orange Bond Specification:
S33H2530
Grinding Medium to Hard Concrete
Very high quality diamond and longer grinding life
Standard Gold Low Profile Cups
Heavy Duty Orange Low Profile Cups
Size
Segment
Type
Number of
Segments
Cat #
List
Price
Size
Segment
Type
Number of
Segments
Cat #
List
Price
5” x 5/8”-11
Single Row
7
84635
$198
5” x 5/8”-11
Single Row
7
84678
$231
5” x 7/8”
Single Row
7
48352
198
5” x 7/8”
Single Row
7
84692
231
5” x 5/8”-11
Spiral Turbo
12
48359
237
5” x 5/8”-11
Spiral Turbo
12
84649
269
5” x 7/8”
Spiral Turbo
12
48389
237
5” x 7/8”
Spiral Turbo
12
84677
269
· Lower profile that will fit on Bosch© grinders
· available in standard Gold and Heavy Duty orange quality grades
· a more shallow Cup Than The Basic Cup Grinders
single Row = Basic grinding and removal
spiral Turbo = Fast, heavy grinding and removal
Dry cutting
products
can be used
with water
5/8”
7/8”
Total
Cup Height
Total
Cup Height
5/8”-11 Threaded Hub Version
7/8” arbor Version
Bosch© is a copyright of Robert Bosch Tool Corporation
and is in no way affiliated with Diamond Products Ltd
48
Wet & Dry Pads for Polishing Concrete
Diamond Grinding Discs
Efficiently grind all types of
concrete, masonry, block and
stone.
Wet Resin Polishing Pads
Combine the benefits of resin
and its ultra smooth finish
with the longevity of diamonds
single Diamond Discs and Resin Pads
Dry Resin Polishing Pads
Individual pads that replace single pads.
Due to the wearing of the pads, replacing all pads at the
same time is recommended.
Produce a mirror finish quickly
with finer diamond grits
3” Resin Polishing Pads - For Ds175 Hand machine only
STEP #
DESCRIPTION
PART #
CAT #
FINISH
List Price
1
2
3
4
5
6
7
3” Wet 50 Grit Resin/Metal (set of 3)
3” Wet 200 Grit Resin (set of 3)
AS-DPC30053PK
AS-DPC30103PK
AS-DPC30203PK
AS-DPC30403PK
AS-DPC30803PK
AS-DPC31503PK
AS-DPC33003PK
47387
47394
47446
47458
47459
47397
47408
Heavy Material Removal
Medium Material Removal
Fine Grinding, Skin Removal
Fine Honing
Beginning Polish
Gloss
Mirror Finish
$155
155
155
155
155
155
155
STEP #
DESCRIPTION - BOND
PART #
CAT #
FINISH
List Price
5” Wet Grinding Disc - T33S2530 (6 Seg)
5” Dry 800 Grit Resin (set of 3)
CGST56SP3PK
CGST512SP3PK
CGST512SP3PK
CGST512SP3PK
CGST512SP3PK
CGST512SP3PK
AS-DPC50503PK
AS-DPC50103PK
AS-DPC50203PK
AS-DPC50403PK
AS-DPC50803PK
AS-DPC51503PK
62886
57162
60646
47077
47082
60652
47366
47374
47375
47379
47380
47384
Hard Epoxy Grinding (25/30 grit)
X-Tra Heavy Removal (25/30 grit)
Heavy Removal (40/50 grit)
Medium Removal (50/60 grit)
Fine Grinding (80/100 grit)
X-Tra Fine Grinding (140/170 grit)
Fine Honing
Satin Finish
Polish Gloss
Near Mirror Finish
$473
655
655
655
655
655
258
258
258
258
177
177
1
2
3
4
5
6
7
5” Diamond Discs & Resin Polishing Pads
Rubber backup
adapters for
polishing
pads - used on
5/8-11 threaded
spindles
sinGle 3” Resin Polishing Pads
DESCRIPTION
Rubber Velcro Backup Pads- sinGle
DESCRIPTION
PART #
CAT #
List Price
3” backup pad
BP-DT358
63228
$55
4” backup pad
BP-DT458
63246
57
5” backup pad
BP-DT558
63247
77
sinGle 5” Diamond Grinding Discs
CAT #
List
Price
DESCRIPTION
for STEP #1 OPTIONS
sinGle 5” Resin Polishing Pads
CAT #
List
Price
DESCRIPTION
CAT #
List
Price
3” Wet 50 Grit Resin Pad
50369
$52
5” Wet 25/30 Grit Disc 6 seg
58179
$158
50380
$85
50370
52
5” Wet 25/30 Grit Disc
51362
218
50376
85
50371
52
55547
218
50377
85
50372
52
49593
218
50378
85
50373
52
56687
218
50381
59
50374
52
60038
218
50382
59
50375
52
49
DiamonD BlaDes
PolisHinG PaDs
DiamonD BlaDes
ComPeTiTion sTYle sKiD PlaTe ReFURBisHinG KiTs
Available for the old style skid plate that consisted of an assembly and the new style skid plate which is
a cast aluminum alloy. The two refurbishment kits are NOT interchangeable. To ensure you order the
correct kit, compare your existing skid with the photos. If you have an old style skid plate, you will need
the sTeel BooT. If you have a cast aluminum alloy plate, you will need the CasT BooT.
CasT BooT
sTeel BooT
Cast Boot shown with
skid plate installed.
side view of installed skid plate
side view of installed skid plate
standard Thin Blades - sTeel BooT
Blade
Diameter
Blade
Thickness
Cat #
6” & 8”
.095”
36915
standard Thin Blades - CasT BooT
List Price
Blade
Diameter
Blade
Thickness
Cat #
List Price
$46.12
6” & 8”
.095”
36940
$48.12
9” & 10”
.100”
36917
51.82
9” & 10”
.100”
36944
50.93
12” and 13-1/2”
.120”
36924
57.49
12” and 13-1/2”
.120”
36952
53.78
12” & 14”
.120”
36933
56.84
12” & 14”
.120”
36957
56.84
Thick Blades - sTeel BooT
Thick Blades - CasT BooT
6” & 8”
.225”
36916
$46.12
6” & 8”
.225”
36941
$48.12
9” & 10”
.250”
36918
51.82
9” & 10”
.250”
36946
50.93
9” & 10”
.380”
36920
51.82
9” & 10”
.380”
36949
50.93
9” & 10”
.500”
36921
51.82
9” & 10”
.500”
36951
50.93
FoR X-400 & GX-4200 saWs -sTeel BooT
12” & 13-1/2”
.250”
36925
FoR X-400 & GX-4200 saWs - CasT BooT
12” & 13-1/2”
$57.49
.250”
36953
$53.78
12” & 13-1/2”
.380”
36931
57.49
12” & 13-1/2”
.380”
36954
53.78
12” & 13-1/2”
.500”
36932
57.49
12” & 13-1/2”
.500”
36955
53.78
12” & 14”
FoR X-3090 PaVeR saWs - sTeel BooT
FoR X-3090 PaVeR saWs - CasT BooT
12” & 14”
.250”
36935
$56.84
.250”
36958
12” & 14”
.380”
36936
56.84
12” & 14”
.380”
36959
56.84
12” & 14”
.500”
36937
56.84
12” & 14”
.500”
36968
56.84
$56.84
NOTE: Refurbishing kits for any thickness blades must be applied to an original Soff-Cut® skid plate of the same blade thickness.
Soff-Cut® is a registered trademark of Husqvarna AB (publ) and is in no way affliated with Diamond Products Limited.
50
Wide selection for Various early entry saws
Dry Cutting
Blade is
air-Cooled
entry-Cut blades for use on Core Cut CC150ee saw
entry-Cut blades have a 1” arbor and drivepin hole that can
be used on standard, low HP walk behind saws
soft Bond for Hard aggregate ·
medium Bond for medium aggregate ·
Hard Bond for soft aggregate
star Blue
• Good life in green concrete
• Three bonds for different aggregate types
star Blue entry-Cut Blades
SIZE
SPECIFICATION
BOND
Cat #
6” x .100 x 1”
6” x .100 x 1”
6” x .100 x 1”
EC100B
EC200B
EC300B
SOFT
MED
HARD
15738
15739
15740
• Long life in green concrete
• Customizable bonds to fit your application
Basic starting Bonds
C52 - for hard aggregate
C55 - for medium aggregate
C60 - for soft aggregate
Consider the aggregate in your area and cure time
before determining the bond specification.
List
Price
$155
155
155
special arbor Hole for Competition-style low Horsepower saws
Premium Black
• Long life in green concrete
• Three bonds for different aggregate types
First-Cut early entry Blades
SIZE
Premium Black entry-Cut Blades
SIZE
SPECIFICATION
BOND
Cat #
List Price
6” x .100 x 1”
6” x .100 x 1”
6” x .100 x 1”
EC100P
EC200P
EC300P
SOFT
MED
HARD
15741
15743
15747
$263
263
263
Heavy Duty orange
early entry Blades
early entry blades for use on Core Cut CC1000 saw
• 1” arbor with drivepin hole
• Three bonds to choose from for green concrete
GCs100H - Soft bond for hard aggregate
GCs200H - Medium bond for medium aggregate
GCs300H - Hard bond for soft abrasive aggregate
early entry Heavy Duty orange
Green Concrete Blades
SIZE
GCS100H
Cat #
GCS200H
Cat #
GCS300H
Cat #
List
Price
8” x .100 x 1”
8” x .125 x 1”
8” x .250 x 1”
44486
44489
44492
44487
44490
44493
44488
44491
44494
$358
379
664
51
6” x .095
8” x .125
10” x .110
12” x .125
14” x .125
C52 Cat # C55 Cat # C60 Cat #
Heavy Duty orange - GooD
16428
16429
16430
16435
16436
16437
16439
16440
16441
16442
16444
28120
16446
16447
00003
List Price
10” x .110
12” x .125
14” x .125
Pro Heavy Duty - BeTTeR
16449
16450
16451
16453
16454
16455
16456
16457
16459
$505
625
765
6” x .095
8” x .125
10” x .110
12” x .125
14” x .125
Premium Black - BesT
16460
16461
16462
03737
16463
16470
16471
16473
16474
16475
16476
16477
16478
16479
16487
$251
421
556
692
837
Joint spacers
$240
381
452
552
674
50 per bag
2” long x 1/2” wide x 1/8” thick
· Used when making cross-cuts
in green concrete
Cat # 17145
List Price: $11.06
DiamonD BlaDes
eaRlY enTRY BlaDes
DiamonD BlaDes
DRY Tile BlaDes
For Fast, Chip-Free Cutting in a Wide Variety of Tile, masonry & stone
Delux-Cut Dry Tile
SIZE
TD2D Cat #
List Price
*4” x .060 x 7/8”
20664
$20
*4-1/2” x .060 x 7/8”
20675
23
*5” x .060 x 7/8”
20681
28
*6” x .060 x 7/8”
20716
38
**7” x .060 x 5/8”
20721
49
8” x .060 x 5/8”
20733
60
10” x .060 x 5/8”
20751
65
Delux-Cut
• Continuous rim for a
smooth cut
• Basic quality diamond
and economical cutting
value
5 Packs
*4” x .060 x 7/8”
20768
$94
**7” x .060 x 5/8”
20769
237
*Denotes 7/8” arbor with 5/8” bushing.
**Denotes diamond arbor with 5/8” (removable) bushing
star Blue Dry Tile
SIZE
TD2B Cat #
List Price
*4” x .060 x 7/8”
80012
$25
*5” x .060 x 7/8”
80013
34
**7” x .060 x 5/8”
80014
62
8” x .060 x 5/8”
80015
74
80016
81
10” x .060 x 5/8”
star Blue
smooth cut
• Good quality diamond
and good cutting value
5 Packs
*4” x .060 x 7/8”
80017
$118
**7” x .060 x 5/8”
80018
297
Heavy Duty orange Dry Tile
SIZE
TD2H Cat #
List Price
*4” x .060 x 7/8”
12508
$77
*5” x .060 x 7/8”
12510
97
*6” x .060 x 7/8”
12512
107
**7” x .060 x 5/8”
12515
124
8” x .060 x 5/8”
12517
146
12519
157
10” x .060 x 5/8”
5 Packs
*4” x .060 x 7/8”
55221
$371
**7” x .060 x 5/8”
55222
593
Heavy Duty orange
smooth cut
• Special air hole design
to keep the blade cool
when cutting
• Very high quality
diamond and longer
cutting life
Dry Cutting
Blade is
air-Cooled
TD2=
General
Purpose
Cutting
52
WeT Tile BlaDes
For Fast, Chip-Free Cutting in a Wide Variety
of Tile, masonry & stone
standard Gold
smooth cut
• Better quality diamond
and better cutting
value
Heavy Duty orange
smooth cut
• Very high quality
diamond and longer
cutting life
Premium Black
smooth cut
• Highest quality
diamond and longest
cutting life
Wet Cutting must Cool Blade
with Water
Ti7_ - Fast, smooth cut in granite, marble, glass,
porcelain and other hard, dense tiles.
Ti10_ - Fast cutting in ceramic or fiberglass and
other soft, porous tiles.
53
standard Gold Wet Tile
SIZE
TI7S
Cat #
TI10S
Cat #
3-3/8” x .050 x 5/8”
45233
4” x .060 x 5/8
12374
87701
48
6” x .060 x 5/8”
12375
87702
61
7” x .060 x 5/8”
45234
87703
65
8” x .060 x 5/8”
12377
87704
76
9” x .060 x 5/8”
45235
87705
87
10” x .060 x 5/8”
12379
87706
98
12” x .080 x 1”
45236
87707
150
14” x .080 x 1”
13522
87708
194
List Price
$39
Heavy Duty orange Wet Tile
SIZE
TI7H
Cat #
TI10H
Cat #
List
Price
4” x .060 x 5/8”
58059
87709
$61
4-1/2” x .060 x 5/8”
87835
12343
64
4-1/2” x .060 x 20mm
96903
6” x .060 x 5/8”
12346
87710
73
7” x .060 x 5/8”
57855
87711
89
8” x .060 x 5/8”
12352
87712
100
9” x .060 x 5/8”
12355
87713
115
10” x .060 x 5/8”
12359
87714
123
12” x .080 x 1”
13512
87715
171
14” x .080 x 1”
23838
87716
243
64
Premium Black Wet Tile
SIZE
TI7P
Cat #
TI10P
Cat #
List
Price
4” x .060 x 5/8”
12361
87717
$77
6” x .060 x 5/8”
12362
87718
93
7” x .060 x 5/8”
45553
87719
110
8” x .060 x 5/8”
12364
87720
122
9” x .060 x 5/8”
87725
87721
137
10” x .060 x 5/8”
12368
87722
152
12” x .080 x 1”
12369
87723
248
14” x .080 x 1”
12370
87724
287
Keep those diamonds
exposed with the tile
sharpening stone
Cat # 48960
list Price: $58
DiamonD BlaDes
To ensure maximum
required to cool these blades
DRY WalK BeHinD BlaDes
DiamonD BlaDes
For saws 20 Horsepower and Below
Delux-Cut
star Blue
cutting value
• Good quality diamond and good
cutting value
star Blue Dry Walk Behind
Delux-Cut Dry Walk Behind
SIZE
DC1D
Cat #
DA2D
Cat #
List Price
SIZE
DC1B
Cat #
DA2B
Cat #
List Price
12” x .125 x 1”
20806
20861
$133
12” x .125 x 1”
70424
70412
$166
14” x .125 x 1”
20825
20875
172
14” x .125 x 1”
70426
70422
215
Dry intermittent
Cutting to let
Blades air-Cool
imperial Purple
standard Gold
• Better quality diamond and very good
cutting life
cutting value
standard Gold Dry Walk Behind
SIZE
DC1S
Cat #
DA2S
Cat #
DG3S
Cat #
12” x .125 x 1”
12” x .187 x 1”
14 x .125 x 1”
14” x .187 x 1”
18” x .125 x 1”
20” x .125 x 1”
11208
27278
11210
11211
50004
17457
11189
14702
11190
11191
50002
14917
11219
11222
imperial Purple Dry Walk Behind
List Price
$389
494
493
739
741
746
• For use on small walk behind saws 20HP or lower
• For intermittent cuts without water for
patch/repair work or expansion joints
• Laser welded for dry cutting
54
SIZE
DC1I Cat #
List Price
12” x .110 x 1”
89306
$418
14” x .125 x 1”
73080
534
DC1_
Da2_
DG3_
Dry
Concrete
Dry
asphalt
Dry
Green
Concrete
DRY WalK BeHinD BlaDes
Heavy Duty orange
DiamonD BlaDes
For saws 20 Horsepower and Below
Premium Black
• Very high quality diamond
• Wide gullets to keep the blade cool
• Longer blade life
• Highest quality diamond
• Wide gullets to keep the blade cool
• Longest blade life
Premium Black Dry Walk Behind
Heavy Duty orange Dry Walk Behind
SIZE
DC1H
Cat #
DA2H
Cat #
DG3H
Cat #
List
Price
SIZE
DC1P
Cat #
DA2P
Cat #
DG3P
Cat #
List
Price
12” x .125 x 1”
12” x .187 x 1”
14 x .125 x 1”
14” x .187 x 1”
18” x .125 x 1”
20” x .125 x 1”
11196
11197
11199
11200
11203
60330
11156
11158
11162
11170
11174
44475
11213
50718
11215
19093
44588
$521
674
640
821
851
942
12” x .125 x 1”
12” x .187 x 1”
14 x .125 x 1”
14” x .187 x 1”
18” x .125 x 1”
20” x .125 x 1”
11204
11205
11206
11207
14582
55061
11175
15954
11178
11183
34477
60631
11217
24109
11218
77223
25607
$655
878
805
1,268
904
1,222
.125” Blades can be used on high speed saws!
V-Gullets allow less
surface-to-surface
contact and helps keep
the blade cool in dry
applications.
Dry intermittent
Cutting to let
Blades air-Cool
DC1_
Da2_
DG3_
Dry
Concrete
Dry
asphalt
Dry
Green
Concrete
• All dry walk behind blades include a
drive pin hole
• For use on small walk behind saws 20HP or lower
• For intermittent cuts without water for
patch/repair work or expansion joints
• Laser welded for dry cutting
55
DiamonD BlaDes
BlaDe & CUP GRinDeR BUsHinGs
Reducer Rings for Blade & Cup arbors
BlaDe & CUP GRinDeR BUsHinGs
Description
Part #
Cat #
List Price
7/8” outside diameter x 5/8” inside diameter x .045 thickness
1700001
00099
$1
7/8” outside diameter x 20 MM inside diameter x .045 thickness
1700002
00100
1
1700003
00101
1
1700004
00102
1
1700005
00104
1
1700006
00105
1
1” outside diameter x 20 MM inside diameter x .070 thickness
1700007
00106
1
1” outside diameter x 3/4” inside diameter x .070 thickness
1700008
00107
3
1700009
00109
2
1-3/8” outside diameter x 1” inside diameter x .110 thickness
1700010
00110
8
1700011
00111
2
1700012
00112
3
DIAMOND outside diameter x 5/8” inside diameter x .045 thickness
1700013
00113
1
5/8” to 20 MM Step Bushing
1700014
00114
4
1700016
00115
5
1700017
69693
22
1-1/2” outside diameter x 3/4” inside diameter x .375 thickness
1700018
76719
14
1700019
05705
5
1” outside diameter x 20 MM inside diameter x .375 thickness
1700020
00116
3
1700021
00117
5
1700022
00118
5
20 MM outside diameter x 5/8” inside diameter x .075 thickness
1700023
00119
2
1700025
25746
5
1700026
00120
3
1700028
00121
5
1700029
00122
5
1700030
75411
21
1700032
00123
5
1700033
00124
4
20 MM outside diameter x 15 MM inside diameter x .110 thickness
1700035
54121
3
1700036
52248
5
5/8” to 7/8” Step Bushing
1700038
00125
5
DIAMOND outside diameter x 1/2 inside diameter x .045 thickness
1700039
00126
1
20 MM outside diameter x 5/8” inside diameter x .050 thickness
1700041
00127
7
1700043
00129
5
1700109
00134
5
1” outside diameter x 20 MM inside diameter knurled bushing
1700117
48764
6
1" outside diameter x 20MM inside diameter x .250 thickness
1" outside diameter x 20MM inside diameter x .200 thickness
* for SpeediCut/FastCut saws
1700122
46799
3
1700134
50326
3
56
Core Bits
STAR BLUE & Utility GREEN WET CORE BITS
Designed for the
occasional driller
with average to light
duty wet drilling
Specification
BOL - General
Specification
GOL - General
purpose, cured
concrete and hard
materials
Core Bits
purpose, cured
concrete and hard
materials
Star Blue
Utility Green
Good quality diamond and good
coring value.
Very good quality diamond and
very good coring value.
Wide spaced for fast coring.
Star Blue Wet Core Bits - 1” to 10”
Utility Green Wet Core Bits - 1” to 12”
SIZE
BOL Cat # List Price
SIZE
GOL Cat # List Price
Water is Required
to Cool Wet
Core Bits
1”
09978
$96
1”
78008
$112
1-1/8”
09979
102
1-1/4”
78020
145
1-1/4”
09981
118
1-1/2”
78023
161
1-1/2”
09989
123
2”
14252
209
Ordering Information:
1-3/4”
10022
137
2-1/2”
14254
246
2”
10028
157
3”
14255
268
Star Blue & Utility Green core bits
are not available with custom bonds.
Note: All diameters are nominal.
2-1/4”
10029
169
3-1/2”
14256
311
2-1/2”
10031
189
4”
14257
354
3”
10041
222
4-1/2”
14258
450
3-1/2”
10055
257
5”
14259
483
4”
10057
298
5-1/2”
14262
530
4-1/4”
10072
320
6”
14264
600
4-1/2”
10074
366
7”
78024
734
5”
10083
389
8”
78058
900
6”
10084
469
9”
78027
1,034
7”
10092
659
10”
78061
1,184
8”
10103
684
12”
78064
1,340
9”
10171
826
10”
10173
834
58
Core Bit Lengths:
Standard core length = 13”
No extra length core is available for
Star Blue or Utility Green Core bits.
Star Blue Hub Sizes:
1” to 2” = 5/8”-11 threaded hub.
2-1/4”” and up = 1-1/4”-7 threaded hub.
Available only with welded threaded hub.
Utility Green Hub Sizes:
1” to 1-1/2” = 5/8”-11 threaded hub.
1-5/8” and up = 1-1/4”-7 threaded hub.
STANDARD GOLD WET CORE BITS
Water is Required
to Cool Wet
Core Bits
Specification
SMF- General
purpose in hard
materials
Core Bits
Standard Gold
Better quality diamond and better coring value.
Designed for average to light duty wet core drilling.
Standard Gold Wet Core Bits
SIZE
All bits may be ordered with custom bonds
Exact tolerances upon request.
Core Bit Lengths:
Up to 14” Diameter Core Bits Standard Core Length = 13”
16” Diameter Core bits Standard Core Length = 19”
Any length available upon request.
Hub Sizes:
1/2” to 1-1/2” = 5/8”-11 threaded hub.
•See page 77 for expansion adapter Part #’s and List Prices.
•See page 77 for Extra Core Length Pricing.
•See page 83 for Re-segmenting Prices.
2”
2-1/4”
2-1/2”
2-3/4”
3”
3-1/4”
3-1/2”
4”
4-1/4”
4-1/2”
5”
5-1/2”
6”
6-1/4”
6-1/2”
7”
8”
9”
10”
12”
14”
16”
59
SMF Cat #
06206
06208
06210
06213
06217
25241
06219
06225
06228
06231
06235
06236
06239
06241
06243
06244
06245
06247
06195
06201
06204
60327
List Price
$224
239
265
287
289
333
335
384
423
477
514
603
622
704
848
913
976
1,187
1,280
1,435
1,834
2,075
Open End
List Price
$198
211
236
254
272
291
295
341
379
431
460
547
558
642
783
836
876
1,067
1,155
1,186
1,369
--
HEAVY DUTY WET CORE BITS
Heavy Duty Orange
Our most popular core bit, Heavy Duty Orange gives excellent footage and
drilling speed. Designed for all types of wet drilling in applications with light
to moderate steel, Heavy Duty Orange is the best bit in the industry.
Very high quality diamond and longer coring life.
Specifications
HOL - General Purpose, Longer Life
H33F - Hard aggregate H64L - Asphalt/Block
Core Bits
Heavy Duty Orange Wet Core Bits - 1/2” to 10”
Water is Required
to Cool Wet
Core Bits
SIZE
HOL
Cat #
H33F
Cat #
H64L
Cat #
1/2”
5/8”
3/4”
7/8”
1”
1-1/8”
1-1/4”
1-3/8”
1-1/2”
1-5/8”
1-3/4”
1-7/8”
2”
2-1/4”
2-1/2”
2-3/4”
3”
3-1/4”
3-1/2”
4”
4-1/4”
4-1/2”
5”
5-1/2”
6”
6-1/4”
6-1/2”
7”
8”
9”
10”
05099
05141
05173
05192
04812
04837
15509
04874
15525
04907
04910
04920
15479
04959
00004
04992
00005
05032
00006
00007
05079
00008
00009
05117
00010
05144
05151
05163
05183
05199
04822
18027
41661
18028
41662
21156
04835
04859
19356
04886
19933
21343
19934
04926
04955
04972
04991
04999
28616
22376
05052
05075
05083
05101
27758
05123
20285
05148
19092
05176
05196
04815
36273
16875
16877
16866
04810
27000
25596
36274
28619
26414
28621
20934
04934
04957
04976
28623
05013
28624
28625
05060
05077
05086
05107
28626
05131
05143
05150
24977
05180
28627
04820
Core Bit Lengths:
18” Diameter Core Bits Standard Core Length = 21”
20”to 24” Diameter Core bits Standard Core Length = 23”
Heavy Duty Heavy Duty
Heavy Duty HOL Wide
Wide Spaced Open End
List Price
Space Cat #
List Price
List Price
$145
146
147
148
154
163
189
192
197
210
219
241
252
270
303
322
356
409
412
476
513
586
623
724
751
839
1,041
1,055
1,094
1,322
1,334
20102
28637
05258
05260
05263
28671
22164
05269
28178
22165
05273
24610
05278
28638
28672
20415
05281
20055
21475
$227
246
277
298
332
360
386
426
463
536
575
675
703
791
955
1,003
1,047
1,274
1,280
$135
151
177
180
183
197
198
219
227
242
275
292
323
373
376
435
470
540
571
670
691
778
979
989
999
1,206
1,214
Heavy Duty Orange Wet Core Bits - 12” to 24”
Size
HOL
Cat #
H33F
Cat #
H64L
Cat #
Heavy Duty
List Price
Add for
Bolt On or
Spoked Hub
Heavy Duty
Open End
List Price
12”
04853
04841
04848
$1,540
$20
$1,275
14”
04882
04877
24889
1,902
23
1,594
16”
04903
18777
25130
2,174
27
2,083
18”
04918
04914
28628
2,473
30
2,123
20”
04947
28617
28636
2,697
34
2,245
24”
04968
28618
04966
3,487
38
2,938
Note: Any length available upon request.
Hub Sizes:
1/2” to 1-1/2” = 5/8”-11 threaded hub.
60
PREMIUM WET CORE BITS
Premium Black
With VERY HIGH diamond concentration, Premium Black gives maximum footage
and drilling speed in all types of wet drilling applications. Good in moderate to
high steel applications. Highest quality diamond and longest coring life
Specifications
POL - General Purpose, Longest Life
P33F - Hard aggregate P64L - Asphalt/Block
Premium Black Wet Core Bits - 1/2” to 10”
POL
Cat #
P33F
Cat #
P64L
Cat #
Premium
Black
List Price
1/2”
5/8”
3/4”
7/8”
1”
1-1/8”
1-1/4”
1-3/8”
1-1/2”
1-5/8”
1-3/4”
1-7/8”
2”
2-1/4”
2-1/2”
2-3/4”
3”
3-1/4”
3-1/2”
4”
4-1/4”
4-1/2”
5”
5-1/2”
6”
6-1/4”
6-1/2”
7”
8”
9”
10”
05826
05917
05962
06004
05293
05338
05381
05404
05441
05472
05483
05509
05529
05571
05607
05629
05661
05688
05709
05761
05791
05805
05843
05867
05892
05921
05927
05945
05984
06013
05306
05820
05912
05957
05998
05286
23309
05373
05399
05427
18689
05476
28580
05516
05565
05596
28581
05643
26748
22306
05742
05782
28582
05831
27102
20265
05919
28583
26932
05969
28584
27971
28585
61808
28587
25115
19871
28588
22003
36271
05438
36267
28595
28596
05525
23771
28597
28598
21246
05686
28599
05753
05788
23173
24580
28600
05886
28601
28602
28603
05980
28604
28605
$156
160
161
167
170
186
219
222
226
264
271
280
288
309
321
368
413
448
458
566
605
658
720
834
867
933
1,108
1,170
1,206
1,468
1,520
Core Bit Lengths:
18” Diameter Core Bits Standard Core Length = 21”
20”to 24” Diameter Core bits Standard Core Length = 23”
POL Wide
Space Cat #
18517
06159
06160
20036
06165
28609
06169
06175
28610
18400
06182
18754
06187
28611
17898
18209
18210
18211
18035
Premium Black Premium
Wide Spaced Open End
List Price
List Price
$258
279
315
338
383
415
445
498
545
620
660
774
809
878
1,056
1,108
1,152
1,410
1,458
$156
175
187
209
212
248
250
256
261
282
293
337
381
416
419
466
562
614
667
779
807
870
1,045
1,094
1,111
1,353
1,399
Premium Black Wet Core Bits - 12” to 24”
Size
POL
Cat #
P33F
Cat #
P64L
Cat #
Premium
Black
List Price
Add for
Premium
Bolt On or
Black Open
Spoked Hub End List Price
12”
05361
05351
05359
$1,699
$20
$1,394
14”
05417
05412
28606
2,098
23
1,763
16”
05462
26250
28607
2,322
27
1,855
18”
05498
26254
05496
2,720
30
2,405
20”
05536
26258
28608
2,995
34
2,650
24”
05584
26262
05583
3,746
38
3,483
Hub Sizes:
1/2” to 1-1/2” = 5/8”-11 threaded hub.
61
Core Bits
Water is Required
to Cool Wet
Core Bits
SIZE
PROFESSIONAL WET CORE BITS
The Industry Standard in High Quality Coring
Core Bits
Water is Required
to Cool Wet
Core Bits
Specification
UOL- Cured Concrete
UOF - Hard Aggregate
with high steel
Specification
TOL- Fast Coring
with heavy steel
Specification
SPOL- Long life in
hard concrete with
moderate steel
Supreme Silver
Pro Blue
Super Premium Red
Highest high quality diamond concentration
meant for smaller holes in very heavy steel
and extremely hard aggregate.
* All sizes available in UOF or UOL.
High quality diamond with wide spaced
segments for very fast drilling in heavy
steel and hard aggregate.
High quality diamond with wide spaced
segments for fast drilling in moderate steel.
Tall .400” segement for Longer life.
Supreme Silver Wet Core Bits
Pro Blue Wet Core Bits
Super Premium Wet Core Bits
SIZE
Spec
Cat #
List Price
SIZE
TOL
Cat #
List Price
Open End
List Price
SIZE
SPOL Cat #
List Price
Open End
List Price
1/2”
UOF
07190
$163
1”
06712
$182
$171
1”
06629
$175
$164
5/8”
UOF
07200
167
1-1/4”
06732
243
231
1-1/4”
21128
227
215
3/4”
UOF
07208
178
1-1/2”
06740
251
237
1-1/2”
06639
235
223
7/8”
UOF
07220
181
1-3/4”
19920
293
271
1-3/4”
06640
285
263
1”
UOF
07097
185
2”
06753
316
291
2”
06641
302
278
1-1/8”
UOF
07110
225
2-1/2”
06760
363
335
2-1/2”
06647
334
307
1-1/4”
UOF
07120
251
3”
06771
445
413
3”
06650
431
399
1-3/8”
UOF
07127
256
3-1/2”
06781
504
464
3-1/2”
06652
465
427
1-1/2”
UOF
07137
274
4”
06791
562
521
4”
06654
530
491
1-5/8”
UOF
07146
319
4-1/2”
06802
695
648
4-1/2”
06660
683
639
1-3/4”
UOF
07154
324
5”
06808
822
769
5”
06662
756
706
1-7/8”
UOF
07160
333
6”
06819
921
859
6”
06665
900
839
2”
UOL
07166
355
7”
06826
1,275
1,199
7”
06670
1,203
1,130
2-1/4”
UOL
28674
375
8”
06833
1,455
1,358
8”
06672
1,307
1,214
2-1/2”
UOL
07173
426
9”
06841
1,700
1,585
9”
06676
1,555
1,441
2-3/4”
UOL
07177
448
10”
06715
1,747
1,624
10”
06631
1,686
1,566
3”
UOL
07179
500
3-1/4”
UOL
23918
564
3-1/2”
UOL
45301
578
Our Pro Blue and Super Premium Red bits are designed with the professional driller in mind.
They have a wider spaced segment design which delivers more power to the cutting surface.
This additional power results in faster coring and higher productivity.
•See page 77 for expansion adapters
62
Core Bit Lengths: Standard Core Length = 13”
Hub Sizes: 1/2” to 1-1/2” = 5/8”-11 threaded hub.
LARGE DIAMETER WET CORE BITS
The Industry Standard in High Quality Coring
Water is Required
to Cool Wet
Core Bits
Spoked Hub
Core Bits
Exclusive on large
diameter bits.
Large Diameter Wet Core Bits
Large diameter bits include a spoke back
hub that has a built in 45 degree radial
water sprayer which gets water to the tube
and segments where it is needed.
HOL - General Purpose, Longer Life
POL - Hard Aggregate, Longest Life
Heavy Duty Orange Large Diameter Wet Core Bits
Premium Black Large Diameter Wet Core Bits
SIZE
26”
28”
30”
32”
34”
36”
38”
40”
42”
44”
46”
48”
Number HD Orange Spoked Hub
Reseg
of Segs HOL Cat # List Price
List Price
40
44
47
49
52
56
60
62
65
68
71
74
04986
04996
05023
05031
28641
25778
28642
28643
28644
41642
41643
28055
$4,891
5,449
6,061
6,544
7,069
7,634
8,141
8,548
9,439
9,910
10,406
11,017
$1,869
1,995
2,089
2,156
2,563
2,686
3,039
3,105
3,200
3,297
3,391
3,487
SIZE
Number
of Segs
26”
28”
30”
32”
34”
36”
38”
40”
42”
44”
46”
48”
40
44
47
49
52
56
60
62
65
68
71
74
63
Premium Spoked Hub
Reseg
POL Cat # List Price
List Price
05622
05632
05671
05682
05696
05721
05740
24832
05781
05797
32564
05817
$5,180
5,720
6,385
6,886
7,420
7,981
8,601
8,945
9,876
10,337
10,815
11,464
$1,909
2,037
2,136
2,205
2,614
2,741
3,098
3,166
3,265
3,362
3,461
3,560
All bits may be ordered with custom
bonds.
Standard Core Length:
26” to 30” = 23”
31” to 48” = 35”
Note: Lengths longer than the
standard are quoted on an
individual basis.
Hub Sizes:
•1-1/4”-7 threaded hub unless
otherwise specified.
•1-7/8” -7 threaded hub available
upon request
Note:All diameters are nominal.
IMPREGNATED B & SUPER B BITS
Segment Ring Allow Less Segment Loss in Concrete with Steel and Cable
Core Bits
Water is Required
to Cool Wet
Core Bits
Specification
B - Concrete with
Specification
SB - Concrete with
light steel and cable
light steel and cable
with high segment for
longer life
Impregnated Yellow
Impregnated Super B Red
Continuous crown segment for applications with
prestressed cable, loose rebar and wire mesh.
Taller continuous crown segment for applications
with prestressed cable, loose rebar and wire mesh.
Impregnated Yellow Wet Core Bits
Impregnated Super B Red Wet Core Bits
SIZE
B Cat #
List Price
Open End
List Price
1”
1-1/8”
1-1/4”
1-3/8”
1-1/2”
1-5/8”
1-3/4”
1-7/8”
2”
2-1/4”
2-1/2”
2-3/4”
3”
3-1/4”
3-1/2”
4”
4-1/4”
4-1/2”
5”
5-1/2”
6”
6-1/4”
6-1/2”
7”
8”
9”
10”
04624
18628
04632
20172
04636
28640
17937
04640
04643
04645
04649
04652
04657
04659
04661
04664
04666
04669
04671
04674
04677
04678
19360
04681
04683
04685
04626
$188
203
204
217
233
252
269
271
280
312
342
366
389
416
433
482
541
594
650
704
760
888
912
989
1,044
1,251
1,541
$174
187
189
203
217
235
243
245
252
280
310
331
352
379
387
435
493
543
591
643
691
820
840
902
934
1,119
1,402
SIZE
1”
1-1/8”
1-1/4”
1-3/8”
1-1/2”
1-3/4”
2”
2-1/2”
2-3/4”
3”
3-1/2”
4”
4-1/4”
4-1/2”
5”
5-1/2”
6”
7”
8”
10”
Super B Cat # List Price
06249
38042
19343
58412
06252
93190
06255
06258
25207
06263
06265
06268
37666
33912
06271
24589
06274
33287
06276
58081
$190
204
206
224
236
277
300
332
382
416
460
549
574
622
694
753
811
1,055
1,115
1,398
Not available with extra core length or custom bonds
Note: All diameters are nominal. Bit Core Length = 13”
Hub Sizes:
1” to 1-1/2” = 5/8”-11 threaded hub. 1-5/8” and up = 1-1/4”-7 threaded hub.
See page 77 for expansion adapter Part Numbers and List Prices
64
PRECAST CORE BITS
Close Segments Allow Less Segment Loss In Precast Concrete with Cable
Water is Required
to Cool Wet
Core Bits
Fast Coring, Longer Life
Fast Coring, Longest Life
Very high quality
diamond and longer
coring life.
Highest quality diamond
and longest coring life.
Precast Core Bits
• Made to resist segment failure from coring through pre-tensioned wire in precast materials
Heavy Duty Orange Precast Core Bits
Premium Black Precast Core Bits
SIZE
HOL Cat #
List Price
SIZE
1”
41210
$165
1”
41226
$191
1-1/4”
41211
216
1-1/4”
41227
245
1-1/2”
41212
224
1-1/2”
41228
256
1-3/4”
41213
246
1-3/4”
41229
307
2”
41214
260
2”
41230
326
2-1/2”
41215
342
2-1/2”
41231
363
3”
41216
402
3”
41232
467
3-1/2”
41217
465
3-1/2”
41233
518
4”
41218
540
4”
41234
641
4-1/2”
41219
661
4-1/2”
41235
747
5”
41220
705
5”
41236
815
6”
41221
849
6”
41237
982
7”
41222
1,195
7”
41238
1,325
8”
41223
1,239
8”
41239
1,369
9”
41224
1,499
9”
41240
1,662
10”
41225
1,511
10”
41241
1,723
Core Bit Lengths: Standard Core Length = 13”
65
POL Cat # List Price
Hub Sizes:
1” to 1-1/2” = 5/8”-11 threaded hub.
Core Bits
Specification
POL - General Purpose,
Specification
HOL - General Purpose,
TURBO WET CORE BITS
Unique Segment Designs for Fast, Long Life Core Drilling
Water is Required
to Cool Wet
Core Bits
Core Bits
Specification
TBOWL- General purpose,
moderate steel
Specification
THOWL- General purpose,
moderate steel, Longer Life
Serrated segment design
for less surface to
surface contact
Star Blue
Heavy Duty Orange
Good quality diamond and good coring value.
Serrated segment for faster cutting
Very high quality diamond and longer coring life in
medium aggregate concrete with moderate steel.
Serrated segment for faster coring.
Heavy Duty Orange Turbo Bits
Star Blue Turbo Bits
SIZE
SIZE
TBOWL Cat # List Price
2”
2-1/2”
3”
3-1/2”
4”
4-1/2”
5”
6”
8”
10”
10185
10186
10237
10238
10266
10272
10290
10305
10307
10323
$141
172
194
241
267
287
309
380
601
740
Star Blue core bits are not available with custom bonds.
Heavy Duty Orange core bits may be ordered with custom bonds.
Note: All diameters are nominal. Heavy Duty Orange core bits may be ordered with
exact tolerances.
Core Bit Lengths: (Note: Extra length core is not available for Star Blue core bits.)
Up to 14” Diameter Standard Core Length = 13”
16” Diameter Standard Core Length = 19”
Star Blue Hub Sizes:
2” = 5/8”-11 threaded hub. 2-1/2” and up = 1-1/4”-7 threaded hub.
Heavy Duty Orange Hub Sizes:
1/2” to 1-1/2” = 5/8”-11 threaded hub. 1-5/8” and up = 1-1/4”-7 threaded hub.
See Page 77 for Extra Core Length Pricing See Page 83 for Re-segmenting Prices
66
1-1/2”
1-3/4”
2”
2-1/4”
2-1/2”
3”
3-1/4”
3-1/2”
4”
4-1/4”
4-1/2”
5”
5-1/2”
6”
7”
8”
9”
10”
12”
14”
16”
THOWL Cat # List Price
06885
35416
06888
06889
06893
06896
93299
06898
06901
06902
06905
06907
23868
06910
06911
06914
06915
06880
06882
65118
38999
$168
196
226
270
276
310
388
386
426
454
460
494
509
607
756
961
1,059
1,185
1,369
1,844
2,120
TURBO WET CORE BITS
Unique Segment Designs for Fast, Long Life Core Drilling
Water is Required
to Cool Wet
Core Bits
Specification
TSPOL - General purpose
moderate steel, fast
TSP33L - Hard aggregate,
fast coring
TSP64L - Asphalt & block,
fast coring
TSPSAG3+ - Fast coring
in hard aggregate with
moderate steel
Core Bits
Specification
TPOWL- General purpose
with high steel, Longest Life
Premium Black
Super Premium Red
Highest quality diamond and longest coring life in
medium aggregate concrete with heavy steel.
Serrated segment for faster coring.
High diamond concentration and quality for very long life. Fastest
coring bit in various applications with heavy steel. Extra high
diamond depth of .400” for the longest life and fastest core.
Premium Black Turbo Bits
Super Premium Red Turbo Bits
SIZE
1-1/2”
1-3/4”
2”
2-1/4”
2-1/2”
3”
3-1/4”
3-1/2”
4”
4-1/4”
4-1/2”
5”
5-1/2”
6”
7”
8”
9”
10”
12”
14”
16”
TPOWL Cat # List Price
06957
30049
06960
06962
06965
06969
44618
06972
06974
06977
06978
06979
06981
06982
06987
06988
16094
06955
06956
23026
24481
$206
237
275
288
307
368
458
404
447
530
536
569
593
627
864
1,063
1,218
1,360
1,496
1,832
2,532
SIZE
2”
2-1/2”
3”
3-1/2”
4”
4-1/2”
5”
6”
7”
8”
9”
10”
TSPOL
Cat #
84820
84821
84822
84823
84824
84825
84826
84827
84828
84829
84830
84831
Serrated segment design
for less surface to
surface contact
TSP33L
Cat #
84836
84837
84838
84839
84840
84841
84842
84843
84844
84845
84846
84847
Segment
Top View
TSP64L TSPSAG3+
Cat #
Cat #
17056
77374
84853
77774
17057
77219
20939
77882
84856
77474
20942
78400
17058
77475
17063
77476
20943
78082
20945
77372
20946
78171
84863
77373
Ribbed segment design
for a faster cut - saving
you time and money
List
Price
$302
334
431
465
530
683
756
900
1,203
1,307
1,555
1,686
Segment
Top View
Core Bit Lengths:
Up to 14” Diameter Standard Core Length = 13”
All bits may be ordered with custom bonds 16” Diameter Standard Core Length = 19”
Hub Sizes:1-1/2” to 1-1/2” = 5/8”-11 threaded hub.
67
THINWALL WET CORE BITS
Light Weight Bits for Fast, Handheld Coring
Core Bits
Water is Required
to Cool Wet
Core Bits
Premium Black and Supreme Silver Thinwall Handheld Core Bits
SIZE
1/2”
5/8”
3/4”
7/8”
1”
1-1/8”
1-1/4”
1-3/8”
1-1/2”
1-5/8”
1-3/4”
1-7/8”
2”
2-1/4”
2-3/8”
2-1/2”
2-3/4”
3”
4”
5”
6”
* Add $12 for Built-In BANTAM Hub
Measurements of Thinwall Core Bits
Outside
Inside
Outside
Inside
Diameter Diameter Diameter Diameter
1/2”
.330
1-3/8”
1.200
5/8”
.450
1-1/2”
1.325
3/4”
.575
1-5/8”
1.450
7/8”
.700
1-3/4”
1.680
1”
.830
1-7/8”
1.700
1-1/8”
.950
2”
1.830
1-1/4”
1.080
2-1/2”
1.980
POL Cat # P33Z Cat #
07061
07065
07071
07077
07017
07021
07027
07031
07037
18222
07043
18223
07050
17941
18224
17948
18225
17827
17828
17829
17940
07059
07063
07069
07073
07014
07019
07024
07029
07034
18916
07042
28786
07046
28913
52793
07054
30015
07057
19043
36871
31774
Premium
List Price
$122
130
145
154
161
177
186
190
194
198
202
206
209
217
251
259
274
287
381
520
625
UOL Cat # U33Z Cat #
28516
28517
28518
28519
28520
28521
28522
28523
28524
28525
28526
28527
28528
28529
28530
28531
28532
28533
28534
28535
28536
30730
21013
86368
36295
30731
99202
90727
97714
34688
21014
56917
21073
17391
21080
21081
52029
21082
46028
46029
36301
36302
Supreme
List Price
$141
154
167
180
190
209
218
223
227
230
234
239
244
255
294
304
323
336
446
607
733
All thinwall bits have a 5/8”-11 hub. Other specifications available upon request.
Core bits have a standard 13” core length.
See Page 77 for Extra Core Length Pricing
Note: All diameters are nominal. Exact tolerances upon request.
SPECIFICATIONS:
POL & UOL - General purpose, fast coring
P33Z & U33Z - Fast coring in harder materials and stone
CORE BITS
FOR TILE, MARBLE & GRANITE
Water is Required to
Cool Wet Core Bits
Premium Black Stone Bits
SPECIFICATION: P28Z - Very hard materials, fast coring
Premium Black Bits for Natural Stone
SIZE
1”
1-1/4”
1-3/8”
1-1/2”
1-3/4”
P28Z Cat #
28026
28027
28029
28033
28034
List Price
$214
279
281
286
342
Premium Black Tile Bits
Wet thinwall core bits with 2” core length for fast, smooth coring
in tile. The soft bond handles very hard tile and the thin crown
segment creates a nice finished core. 3” overall length
Wet core bits for drilling marble and granite.
Core length of 2” allows an accurate hole in hard materials.
Crown style for a smooth finish. 3” overall length.
SPECIFICATION: P28Z - Very hard materials, fast coring
Works well with our straight shank
adapters and water swivels
3/8” SS to 5/8-11 adapter - Cat #01913 - $29.24
1/2” SS to 5/8-11 adapter - Cat # 01899 - $29.24
5/8” SS to 5/8-11 adapter - Cat # 01936 - $40.94
375HD water swivel
5/8-11 to 5/8-11 with water valve
Cat # 01885 - List Price: $215
Custom Bonds Available
See Page 77 for Extra Length Pricing
68
Premium Black Tile Bits
SIZE
1”
1-1/4”
1-3/8”
1-1/2”
1-3/4”
2”
P28Z Cat #
73910
73913
73914
73924
73915
73923
List Price
$209
240
246
251
262
270
PLATED HOLE SAW BITS
Electroplated Diamond Bits for Tile, Stone and More
Materials:
• Tile - all types
• Marble
• Granite
• Glass
• Fiberglass
• Pottery
• Mirror
• Slate
Applications:
• Faucet Installations
• Towel Bars
• Shower Doors
• Shelving Brackets
• Toilet Anchors
• Plumbing Pipe Holes
• Electrical Outlets
• and More!
Water is Required
for Cooling
14 Piece Set
Core Bits
10 Piece Set
Core Bore
Plated Hole Saw Bits Easily Fit
Into Standard Rotary Drills and
Are Simple To Use
* Resegmenting, extra core
length and custom bonds
are not available
5 Piece Set with Universal Guide
Universal guides can help you keep
your bit straight and aligned with your
desired drilling spot
Plated hole saw bits are selfsharpening. You get the entire
life of the diamond due to the
electroplated technology
Plated Hole Saw Bits (Individual)
SIZE
1/8”
1/4”
5/16”
3/8”
1/2”
5/8”
7/8”
1”
1-1/4”
1-3/8”
1-1/2”
1-5/8”
2”
2-1/4”
2-3/8”
2-1/2”
2-7/8”
3”
3-1/4”
Cat #
04235
04236
07344
04237
04239
09324
09326
04240
04241
04243
04248
09330
04250
04251
04253
04254
09334
04255
09335
List Price
$15
22
26
31
48
49
50
56
62
71
72
86
99
115
145
152
157
162
171
Plated Hole Saw Sets
Suction Ring Set
These trap rings prevent the use of
putty dam. Putty dam is clay or putty
rolled into a ring to prevent water from
escaping the drilling area. This can be
messy and time consuming.
Water trap rings are recommended for
keeping your drilling area cleaner.
69
DESCRIPTION
5 piece set with
universal guide
10 piece set with pilot
adapter
14 pieces set
with guide, water bottle
suction rings
1-1/2” & 3” set
Cat #
List Price
04257
$424
03287
792
04258
158
03288
32
DRY DIAMOND CORE BITS
Core Drill Without Water
Dry bits are used with
intermittent cuts allowing
air to cool the bit
Core Bits
NO WATER NEEDED
Star Blue
DRY HOLE SAW
Heavy Duty Orange
DRY HOLE SAW
DB - Block and soft brick not for use on concrete
Good quality diamond and
good coring value
DH - Block and soft brick not for use on concrete
Very high quality diamond
and longer coring life
Star Blue Dry Hole Saw Bits
SIZE
Heavy Duty Orange Dry Hole Saw Bits
Drill/Grinder Max RPM/
DB Cat # List Price
Min. Amps Min RPM
SIZE
DH Cat #
List Price
Min. Amps Min RPM
7/8”
35377
$90
6
6000/2300
7/8”
04771
$139
6
6000/2300
1”
35385
92
6
6000/2300
1”
04706
142
6
6000/2300
1-1/4”
35390
100
6
6000/2300
1-1/4”
04711
154
6
6000/2300
1-1/2”
35392
115
7
5000/1600
1-1/2”
04717
177
7
5000/1600
1-3/4”
35399
122
7
5000/1600
1-3/4”
04720
187
7
5000/1600
2”
35406
137
7
5000/1200
2”
00011
210
7
5000/1200
2-1/4”
35437
143
7
5000/1200
2-1/4”
04727
220
7
5000/1200
2-1/2”
35440
148
7
5000/1200
2-1/2”
00012
227
7
5000/1200
3”
35444
193
7
5000/800
3”
00013
297
7
5000/800
3-1/2”
35452
217
10
5000/800
3-1/2”
00014
334
10
5000/800
4”
35453
230
10
5000/700
4”
04745
354
10
5000/700
4-1/2”
35459
278
10
5000/700
4-1/2”
04751
428
10
5000/700
5”
35478
320
10
3500/700
5”
04756
493
10
3500/700
6”
35479
398
10
2500/600
6”
04764
613
10
2500/600
Dry Hole Saw Notes:
•Not all types of brick and block can be drilled please consult factory.
•9” drilling depth and 5/8”-11 hub
•Jacobs Chuck adapter available for hand held
rotary drills 5/8”-11 thread to straight shank
•Custom bonds, extra core length and
resegmenting is not available on dry core bits.
Adapters for Dry Bits
Description
Part #
Cat #
List Price
5/8”-11 pilot adapter
4400035
01902
$39.77
1/2” straight shank pilot adapter
4400034
01901
39.77
1/2” carbide pilot drill with A-Taper
1400029
00033
51.00
70
DRY DIAMOND CORE BITS
Core Drill Without Water
Dry bits are used with
intermittent cuts allowing
air to cool the bit
NO WATER NEEDED
Premium Black
DRY HOLE SAW
Heavy Duty Orange
DRY VACUUM BIT
DVH - Cured concrete & masonry
Core Bits
DP - Brick and block not for use on concrete
Highest quality diamond
and Longest life
Very high quality diamond
and Longer Life
Dry Vacuum Bit Notes:
Wider segments with heavier
barrel wall to withstand harder
brick and prevent segment loss.
• Do not use in applications with
steel heavier than wire mesh
• 9” drilling depth with 1.250”-12
threaded hub
Heavy Duty Orange Dry Vacuum Bits
Premium Black Dry Hole Saw Bits
List Price
Min. Amps Min RPM
SIZE
Cat #
List Price
Max RPM/
Min RPM
SIZE
DP Cat #
7/8”
46326
$159
6
6000/2300
1-1/2”
04775
$177
5000/1600
1”
46327
162
6
6000/2300
1-3/4”
04777
187
5000/1600
1-1/4”
46328
174
6
6000/2300
2”
04780
210
5000/1200
1-1/2”
46329
202
7
5000/1600
2-1/4”
04782
220
5000/1200
1-3/4”
46330
214
7
5000/1600
2-1/2”
04785
227
5000/1200
2”
46331
238
7
5000/1200
3”
04789
297
5000/800
2-1/4”
46332
251
7
5000/1200
3-1/2”
04793
334
5000/800
2-1/2”
46333
260
7
5000/1200
4”
04796
354
5000/700
3”
46334
340
7
5000/800
4-1/2”
04799
428
5000/700
3-1/2”
46335
382
10
5000/800
5”
04802
493
3500/700
4”
46336
404
10
5000/700
6”
04805
613
2500/600
4-1/2”
46337
488
10
5000/700
Dry Vacuum Bits Must Use a Dry Vacuum Swivel
5”
46338
562
10
3500/700
6”
46339
698
10
2500/600
5/8”-11 to 1.250”-12 Vacuum Swivel Assembly
Vacuum attachment fits a standard shop vacuum
Cat # 01950, Part # 4400125 $252.00
Swivel Extension - (12”)
Cat # 01951, Part # 4400126 $63.86
Dry Hole Saw Notes:
•Not all types of brick and block can be drilled please consult factory.
•9” drilling depth and 5/8”-11 hub
•Jacobs Chuck adapter available for hand held
rotary drills 5/8”-11 thread to straight shank
DRY VACUUM BIT ADAPTER
For use with a standard shop
vacuum to remove dust and debris.
Great for use in clean areas where
dust control is required.
71
THREADED CORE BITS
Unique Core Bits for Specialized Applications
Core Bits
Water is Required
for Cooling
Threaded Core Bits
Allows increased range of drilling depth with continuous tubing threaded bits and barrels. Additional barrel
lengths can be added as you drill deeper, similar to oil drilling. Standard threaded bits have a core length of 12”
and extra barrel lengths are available in 12”, 24”, 36” and 48”. Segment width of threaded bits are .187” for bits
1-1/2” to 6-1/2”. Threaded bits 7” to 10” have .250” segment width.
Specifications:
HOL - General purpose, cured concrete with moderate steel
POL - General purpose, concrete with heavy steel, long life
P33F - Very hard aggregate with heavy steel
UOF- High diamond concentration for concrete with extremely high steel content
Threaded Bits
SIZE
1-1/2”
2”
2-1/4”
2-1/2”
2-3/4”
3”
3-1/4”
3-1/2”
4”
4-1/4”
5”
5-1/2”
6”
6-1/4”
6-1/2”
7”
8”
9”
10”
HD Orange
Premium
Premium
Premium
HD Orange
HOL
Black POL Black P33F
Black
List Price
Cat #
Cat #
Cat #
List Price
44577
18073
36614
05252
05253
28541
$285
362
371
424
449
478
17967
05254
541
621
45315
777
28543
913
69850
52319
28186
50411
79382
1,015
1,155
1,173
1,384
1,539
06134
06138
06140
06143
23245
06144
28546
06146
06148
87522
06150
28548
06151
50412
28550
06152
06154
28551
06129
26298
26300
26299
26301
21098
26314
21099
26317
26318
21105
26319
21110
28553
21111
21113
26320
26321
72240
26323
72
$336
444
456
532
541
599
652
681
773
863
969
1,059
1,154
1,212
1,324
1,425
1,442
1,711
1,840
Supreme
Silver UOF
Cat #
Supreme
Silver
List Price
29515
07233
71468
18259
18260
18261
$410
571
591
649
660
739
18297
83914
749
818
THREADED CAPS AND BARRELS
For Deep Hole Drilling
Core Bits
Threaded Caps & Threaded Barrels
DIAMETER
1-1/4”-7
Threaded Threaded
12” Core
Cap Part #
Cap
Barrel Part #
List Price
12” Core
Barrel
List Price
24” Core
Barrel Part #
24” Core
Barrel
List Price
36” Core
Barrel
Part #
36” Core
48” Core
Barrel
Barrel Part #
List Price
48” Core
Barrel
List Price
1”
06862
$141
60334
$139
56985
$152
62087
$228
91894
$241
1-1/4”
06864
145
85085
141
76835
156
80066
235
62088
250
1-1/2”
06865
147
47307
143
52106
163
47312
245
54789
264
2”
06867
150
47308
145
47773
165
47774
247
53897
267
2-1/4”
06868
153
58974
212
58975
235
82301
257
95136
280
2-1/2”
06869
224
49936
215
49937
242
49938
268
65808
301
2-3/4”
54344
232
60161
218
54343
248
85872
279
69504
309
3”
06870
234
47309
220
49917
250
47314
281
47509
312
3-1/4”
73973
240
85705
226
89515
262
73974
299
73975
335
3-1/2”
06872
253
49912
232
49913
274
49914
316
57188
359
4”
06873
257
47310
234
49925
295
47315
349
54236
402
4-1/4”
58973
263
58972
236
58971
330
47874
432
25922
535
4-1/2”
49895
275
49919
242
49920
345
49921
455
72869
564
5”
06874
292
47588
267
48713
365
49931
485
56475
605
5-1/2”
58910
301
58911
292
58912
459
25926
625
25930
792
6”
06875
319
47311
340
49933
553
47316
767
56078
981
6-1/4”
19357
321
20976
387
19348
648
58927
909
20918
1,170
6-1/2”
49088
420
49087
866
25933
1,039
25934
1,212
97036
1,384
7”
06876
429
62372
958
86403
1,222
62373
1,487
71541
1,751
8”
06877
455
53570
965
54813
1,235
47479
1,496
51261
1,764
9”
55077
463
82978
972
81181
1,251
55076
1,530
92031
1,809
10”
06863
469
68676
992
49465
1,292
49947
1,591
49464
1,890
73
CARBIDE REBAR & PLATE CUTTER CORE BITS
Carbide Inserts on a Thick Core Barrel Allow Coring Rebar and Plate Steel
Carbide Rebar and Plate Cutter Core Bits
Core Bits
Water is Required
for Cooling
Carbide Rebar & Plate Cutters
Designed to cut through rebar or plate
steel after a diamond core bit has drilled
through the concrete.
Carbide inserts are brazed into the core
barrel. These specialized bits must be
used with water to keep the bit cool while
drilling in steel.
13” Standard core length
SIZE
Rebar
Cutter
Cat #
1/2”
5/8”
3/4”
7/8”
1”
1-1/8”
1-1/4”
1-3/8”
1-1/2”
1-5/8”
1-3/4”
1-7/8”
2”
2-1/2”
3”
3-1/2”
4”
5”
6”
07253
07256
07257
07259
07236
07237
07238
07239
07240
58064
07241
07242
07243
07248
07249
07250
07252
07254
07255
Rebar
# of
Cutter
Inserts
List Price
$264
274
282
288
297
312
326
366
402
418
422
441
459
472
634
681
742
1,050
1,244
4
4
4
4
4
4
6
6
6
6
6
6
8
10
10
14
16
18
24
Plate
Cutter
Cat #
59195
49514
49515
52040
07260
07262
07263
61081
07265
62663
07266
55705
07267
07269
07270
62429
07273
43399
07275
Plate
# of
Cutter List
Inserts
Price
$288
291
292
307
326
343
385
394
483
518
540
544
546
619
745
827
865
1,310
1,790
4
6
6
8
10
12
12
12
14
14
16
16
20
22
24
32
34
36
38
Retractable Carbide Bits
Used in Offices and buildings where
duct work is present
Cat # 01673
Carbide bit drills through thin ductwork
and diamond bit drills through concrete
Retractable Carbide Bits
Cat # 01930
Cat # 01928
Cat # 00032
Description
Cat #
List Price
2-1/4” x 2-1/2” Retractable carbide
Diamond Bit (complete)
01673
$742
2-1/4” Carbide Hole Saw
2-1/2” x 8” HOL Threaded Bit*
Threaded Bit Adapter
2-3/4” Left/Right Threaded Cap
2-1/2” Left/Right Threaded Cap
00032
05252
01929
01930
01928
300
424
216
60
60
*Specify threads for retractable carbide bit when ordering.
Cat # 01929
Cat # 05252
74
SPECIALTY CORE BITS
Custom Bits for Various Applications
Water is Required
for Cooling
The #1 Source for Custom Core Bits
Step Bits
Core Bits
Designed to make a recessed ‘step’ for drain covers,
and other special uses. Custom sizes available.
Available in all quality grades and in
straight segment or turbo style.
Other Sizes and Specifications Available
*Star Blue and Utility Green excluded
These bits are custom made to your individual
application. Examples shown below.
Call customer service to order yours today!
Step Bits
Heavy Duty Orange
HOL-General Purpose, Longer Life
Size/Description
Part #
Cat #
Specification
List Price
2” X 3” X 4” X 6” CORE
BH200030004000
01079
HOL
$1,084
2” X 4”
BH20004000
23045
HOL
946
2” X 4” X 6”
BH200040006000
08724
HOL
1,769
2”X 4” X 6-1/2”
BH200040006500
27384
HOL
1,769
2-1/4” X 2-1/2” X 8-1/4” CORE
BH22502500
04961
HOL
558
2-9/32” X 2-9/16”
BH22812562
52075
HOL
657
3” X 3 1/2” CORE
BH30003500
78611
HOL
768
4.515” X 2.980” X 3/8” CARBIDE PILOT
BH451538
66964
HOL
2,251
4.700” X 4.090” X 3/8” CARBIDE PILOT
BH470038
66967
HOL
2,588
5” X 3” X 1”
BH531STP
50768
HOL
1,298
Premium Black
POL-General Purpose, Longest Life
Size/Description
Part #
Cat #
Specification
List Price
1” X 3” X 5” X 24” DRILL DEPTH
BP100030005000
26784
POL
$1,907
1 3/4” X 2”
BP17502000
25738
POL
558
2” X 3 1/2”
BP20003500
76194
POL
747
2” X 5”
BP20005000
97639
POL
1,009
2-1/4” X 2-1/2”
BP22502500
05572
POL
711
6.850” X 6-1/8”
BP68506125
29113
POL
2,816
1 1/4” X 3/4”
BP7501250
18535
POL
385
75
PANCAKE BITS
Custom Core Bits for Specialized Applications
Water is Required
for Cooling
‘Pancake’ Bits
Core Bits
For use in applications where a hole is needed with a
recessed top. Great for airport runway light canisters.
Most custom sizes and bonds available.
These bits are custom made to your individual
application. Examples shown below.
Other Sizes and Specifications Available
Call customer service to order yours today!
Pancake Bits
Heavy Duty Orange
HOL-General Purpose, Longer Life
Size/Description
Part #
Cat #
Specification
List Price
2.880” X 4.620”
BH28804620
84474
HOL
$961
3.000” X 4.500”
BH30004500
99174
HOL
1,232
3-1/2” X 3”
BH35003000
13780
HOL
413
3.541” X 1.500” PILOT
BH35411500
51323
HOL
806
3.840” X 1/2” CARBIDE PILOT
BH384012
61773
HOL
778
3.840” X 1.500” PILOT
BH38401500
53314
HOL
904
4” X 2” with 2” CENTER PILOT 3” LONG
BH40002000P
01093
HOL
946
4.120” X 4.750”
BH41204750
84475
HOL
2,251
4.515” X 2.980” X 3/8” CARBIDE PILOT
BH451538
66964
HOL
2,251
4.700” X 4.090” X 3/8” CARBIDE PILOT
BH470038
66967
HOL
2,588
5” X 3”
BH50003000P
16889
HOL
1,210
5 1/2” WITH 1 1/4”-7 HUB
BH5500P
04467
HOL
759
6 1/2” X 4 3/4” HEAVY DUTY
BH65004750
20352
HOL
1,647
7” X 6-1/2”
BH70006500P
71695
HOL
2,097
Premium Black
POL-General Purpose, Longest Life
Size/Description
Part #
Cat #
Specification
List Price
1-3/4” X 1-1/8”
BP17501125
04358
POL
$447
2-1/2” PANCAKE X 2” PILOT
BP25002000
23843
POL
727
2 1/2” PANCAKE X 7/8” PILOT
BP250078
96775
POL
490
1-3/4” X 2-7/8”
BP28751750
04356
POL
645
3-1/8” X 7/8” PILOT
BP312578
88235
POL
610
4-1/2” X 2-3/4” WITH PILOT
BP45002750P
25612
POL
1,078
5” X 3-1/2”
BP50003500
99106
POL
1,081
76
CORE BIT OPTIONS
Expansion Adapters for Open End Bits & Pricing for Extra Core Length
Add to List Price for Extra
Core Length
Expansion Adapters - For Use
with Open-Ended Bits
Part #
Cat #
List Price
1”
4010476
01638
1-1/8”
4010477
01639
1-1/4”
4010478
54239
1-3/8”
4010479
01640
1-1/2”
4010480
01641
1-5/8”
4010481
01642
1-3/4”
4010482
01643
1-7/8”
4010483
71254
2”
4010484
01644
2-1/4”
4010485
01645
2-1/2”
4010486
01646
2-3/4”
4010487
01647
3”
4010488
01648
3-1/4”
4010489
01649
3-1/2”
4010490
01651
4”
4010491
01652
4-1/4”
4010492
01654
4-1/2”
4010493
01655
5”
4010494
01656
5-1/2”
4010495
01658
6”
4010496
01659
6-1/4”
4010497
01660
6-1/2”
4010498
01661
7”
4010499
01662
8”
4010500
01663
9”
4010501
01664
10”
4010502
01665
$67
73
74
78
85
86
87
88
89
102
111
124
135
146
158
180
197
208
226
248
269
314
343
372
407
415
508
Expansion adapters are used instead of welded
hubs on open-end core bits. These adapters are
made up of two threaded plates with expansion
ring. These three pieces are placed in the core
barrel and tightened on the drill rig spindle. The
expansion ring expands, and tightens against
the core barrel - keeping the bit secure.
77
SIZE
Per Extra Inch of
Core Length
1/2”
$1
5/8”
1
3/4”
1
7/8”
1
1”
2
1-1/8”
2
1-1/4”
2
1-3/8”
2
1-1/2”
2
1-5/8”
2
1-3/4”
2
1-7/8”
2
2’
4
2-1/4”
4
2-3/8”
4
2-1/2”
4
2-3/4”
4
3”
5
3-1/4”
5
3-1/2”
5
4”
6
4-1/4”
6
4-1/2”
6
5”
8
5-1/2”
8
6”
9
6-1/4”
9
6-1/2”
9
7”
10
8”
12
9”
13
10”
15
12”
20
14”
23
16”
27
18”
30
20”
34
24”
38
Core Bits
SIZE
Core Bits
CORE BIT SEGMENTS ONLY .145” through .187” Thickness
Heavy Duty Orange Segments Only
Specification: HOL
Premium Black Segments Only
Specification: POL
Pro Blue Segments Only
Specification:TOL
.145” Thickness
.145” Thickness
.145” Thickness
Bit
Size
Part #
Cat #
List
Price
Bit
Size
Part #
Cat #
List
Price
Bit
Size
Part #
Cat #
List
Price
1”
BSGH14501
30043
$22.73
1”
BSGP14501
30309
$29.41
1”
BSGT14501
30968
$30.09
1-1/4”
BSGH145125
30047
22.73
1-1/4”
BSGP145125
30316
29.41
1-1/4”
BSGT145125
30998
30.09
1-1/5”
BSGH14515
30081
22.73
1-1/5”
BSGP14515
30317
29.41
1-1/5”
BSGT14515
31007
30.09
2”
BSGH14502
25040
22.73
2”
BSGP14502
25562
29.41
2”
BSGT14502
26864
30.09
2-1/2”
BSGH14525
25041
22.73
2-1/2”
BSGP14525
25579
29.41
2-1/2”
BSGT14525
26894
30.09
3”
BSGH14503
25044
22.73
3”
BSGP14503
22013
29.41
3”
BSGT14503
26906
30.09
4”
BSGH14504
25062
22.73
4”
BSGP14504
25581
29.41
4”
BSGT14504
26909
30.09
5”
BSGH14505
25076
22.73
5”
BSGP14505
22030
29.41
5”
BSGT14505
26913
30.09
6”
BSGH14506
23257
22.73
6”
BSGP14506
26141
29.41
6”
BSGT14506
26923
30.09
8”
BSGH14508
30082
22.73
8”
BSGP14508
30303
29.41
8”
BSGT14508
30969
30.09
12” +
BSGH14512
30088
22.73
12” +
BSGP14512
30305
29.41
12” +
BSGT14512
30979
30.09
.165” Thickness
.165” Thickness
1”
BSGH16501
25318
$26.68
1-1/4”
BSGH165125
30105
1-1/5”
BSGH16515
30164
2”
BSGH16502
2-1/2”
3”
1”
BSGP16501
1”
BSGT16501
26.68
1-1/4”
BSGP165125
30962
26.68
1-1/5”
BSGP16515
25591
34.44
1-1/4”
BSGT165125
31040
33.78
34.44
1-1/5”
BSGT16515
31045
33.78
25321
26.68
2”
BSGP16502
25595
34.44
2”
BSGT16502
26925
33.78
BSGH16525
30209
26.68
2-1/2”
BSGP16525
BSGH16503
25323
26.68
3”
BSGP16503
25597
34.44
2-1/2”
BSGT16525
26948
33.78
23003
34.44
3”
BSGT16503
26954
33.78
4”
BSGH16504
22796
26.68
4”
BSGP16504
23812
34.44
4”
BSGT16504
26955
33.78
5”
BSGH16505
25332
26.68
6”
BSGH16506
25334
26.68
5”
BSGP16505
25599
34.44
5”
BSGT16505
26960
33.78
6”
BSGP16506
25605
34.44
6”
BSGT16506
26967
33.78
8”
BSGH16508
25335
26.68
8”
BSGP16508
15289
34.44
8”
BSGT16508
27246
33.78
12” +
BSGH16512
25336
26.68
12” +
BSGP16512
25614
34.44
12” +
BSGT16512
30460
33.78
.187” Thickness
25586
.165” Thickness
$34.44
.187” Thickness
1”
BSGH18701
30897
$29.66
1-1/4”
BSGH187125
30903
1-1/5”
BSGH18715
30905
2”
BSGH18702
2-1/2”
3”
30342
31022
$33.78
.187” Thickness
1”
BSGP18701
1”
BSGT18701
29.66
1-1/4”
BSGP187125
30364
29.66
1-1/5”
BSGP18715
25634
38.31
1-1/4”
BSGT187125
31112
37.82
38.31
1-1/5”
BSGT18715
31124
37.82
25341
29.66
2”
BSGP18702
25637
38.31
2”
BSGT18702
26969
37.82
BSGH18725
25367
29.66
2-1/2”
BSGP18725
BSGH18703
25369
29.66
3”
BSGP18703
30306
38.31
2-1/2”
BSGT18725
26971
37.82
25730
38.31
3”
BSGT18703
26978
37.82
4”
BSGH18704
25378
29.66
4”
BSGP18704
25974
38.31
4”
BSGT18704
26979
37.82
5”
BSGH18705
25386
29.66
6”
BSGH18706
25390
29.66
5”
BSGP18705
25979
38.31
5”
BSGT18705
27014
37.82
6”
BSGP18706
17281
38.31
6”
BSGT18706
27017
37.82
8”
BSGH18708
23582
29.66
8”
BSGP18708
23804
38.31
8”
BSGT18708
27018
37.82
12” +
BSGH18712
20612
29.66
12” +
BSGP18712
15318
38.31
12” +
BSGT18712
27020
37.82
$38.31
31109
$37.82
Bit Crowns - 1/2” through 1”
Diameter HD Orange
HOL Cat #
1/2”
5/8”
3/4”
7/8”
1”
28555
28556
28557
28558
28559
HD Orange
Premium
Premium Black Supreme Silver Supreme Silver
List Price Black POL Cat #
List Price
UOF Cat #
List Price
$70
71
75
89
116
28566
21790
20261
18340
06309
$106
108
111
125
137
78
06357
06359
06361
06362
06346
$127
132
137
154
163
Bit Crowns are continuous
and have water ways to allow
water and slurry to escape.
CORE BIT SEGMENTS ONLY .145” through .187” Thickness
NOTE: Bits 9” and above use
part #’s ending in 12
Super Premium Red Plus Turbo Segments Only
Specification: TSPSAG3+
.145” Thickness
.145” Thickness
Bit Size
Part #
Cat #
List
Price
Bit Size
Part #
Cat #
List
Price
1”
BSGU14501
31174
$34.54
1”
BSGTSP+14501
30478
$28.82
1-1/4”
BSGU145125
31181
34.54
1-1/4”
BSGTSP+145125
30480
28.82
1-1/5”
BSGU14515
27773
34.54
1-1/5”
BSGTSP+14515
30485
28.82
2”
BSGU14502
27796
34.54
2”
BSGTSP+14502
17126
28.82
2-1/2”
BSGU14525
27834
34.54
2-1/2”
BSGTSP+14525
28433
28.82
3”
BSGU14503
27851
34.54
3”
BSGTSP+14503
19853
28.82
4”
BSGU14504
27852
34.54
4”
BSGTSP+14504
15872
28.82
5”
BSGU14505
27855
34.54
5”
BSGTSP+14505
28449
28.82
6”
BSGU14506
27856
34.54
6”
BSGTSP+14506
28451
28.82
8”
BSGU14508
31184
34.54
8”
BSGTSP+14508
30487
28.82
12” +
BSGU14512
31196
34.54
12” +
BSGTSP+14512
30500
28.82
.165” Thickness
.165” Thickness
1”
BSGU16501
31610
$38.78
1”
BSGTSP+16501
31681
$31.46
1-1/4”
BSGU165125
31626
1-1/5”
BSGU16515
31627
38.78
1-1/4”
BSGTSP+165125
31691
31.46
38.78
1-1/5”
BSGTSP+16515
31701
31.46
2”
BSGU16502
27882
38.78
2”
BSGTSP+16502
28453
31.46
2-1/2”
BSGU16525
27894
38.78
2-1/2”
BSGTSP+16525
19389
31.46
3”
BSGU16503
27899
38.78
3”
BSGTSP+16503
18872
31.46
4”
BSGU16504
27902
38.78
4”
BSGTSP+16504
15965
31.46
5”
BSGU16505
27905
38.78
5”
BSGTSP+16505
18910
31.46
6”
BSGU16506
27911
38.78
6”
BSGTSP+16506
14797
31.46
8”
BSGU16508
27923
38.78
8”
BSGTSP+16508
14836
31.46
12” +
BSGU16512
30476
38.78
12” +
BSGTSP+16512
28475
31.46
.187” Thickness
.187” Thickness
1”
BSGU18701
31574
$43.51
1”
BSGTSP+18701
31718
$35.20
1-1/4”
BSGU187125
31575
1-1/5”
BSGU18715
31578
43.51
1-1/4”
BSGTSP+187125
31727
35.20
43.51
1-1/5”
BSGTSP+18715
31730
35.20
2”
BSGU18702
27938
43.51
2”
BSGTSP+18702
28487
35.20
2-1/2”
BSGU18725
27942
43.51
2-1/2”
BSGTSP+18725
28492
35.20
3”
BSGU18703
27955
43.51
3”
BSGTSP+18703
28507
35.20
4”
BSGU18704
27958
43.51
4”
BSGTSP+18704
09681
35.20
5”
BSGU18705
27967
43.51
5”
BSGTSP+18705
18636
35.20
6”
BSGU18706
27978
43.51
6”
BSGTSP+18706
28737
35.20
8”
BSGU18708
27993
43.51
8”
BSGTSP+18708
08511
35.20
12” +
BSGU18712
28231
43.51
12” +
BSGTSP+18712
14844
35.20
Bit Crowns - 1-1/8” through 1-3/4”
Diameter HD Orange
HOL Cat #
1-1/8”
28560
1-1/4”
28561
1-3/8”
28562
Bit Crowns are continuous
1-1/2”
28563
and have water ways to allow
1-5/8”
28564
water and slurry to escape.
1-3/4”
51159
HD Orange
Premium
Premium Black Supreme Silver Supreme Silver
List Price Black POL Cat #
List Price
UOF Cat #
List Price
$129
06312
$150
06348
$178
132
06315
156
06349
186
140
06319
166
06350
202
148
06325
175
06351
213
155
18889
182
06352
223
167
06332
196
06355
249
79
Core Bits
Loose segments include
silver braze.
Extra braze available
Cat # 00166 $1.00
Supreme Silver Segments Only
Specification: UOL
CORE BIT SEGMENTS ONLY
Core Bits
.200” through .250” Thickness
Heavy Duty Orange Segments Only
Specification: HOL
Premium Black Segments Only
Specification: POL
Pro Blue Segments Only
Specification: TOL
.200” Thickness
.200” Thickness
.200” Thickness
Bit Size
Part #
Cat #
List
Price
1”
BSGH20001
30908
$31.44
1”
BSGP20001
30366
$40.66
1”
BSGT20001
31135
$41.68
1-1/4”
BSGH200125
30913
31.44
1-1/4”
BSGP200125
30390
40.66
1-1/4”
BSGT200125
31138
41.68
1-1/5”
BSGH20015
30909
31.44
1-1/5”
BSGP20015
30395
40.66
1-1/5”
BSGT20015
31142
41.68
2”
BSGH20002
25395
31.44
2”
BSGP20002
25985
40.66
2”
BSGT20002
27041
41.68
2-1/2”
BSGH20025
25398
31.44
2-1/2”
BSGP20025
25994
40.66
2-1/2”
BSGT20025
27055
41.68
3”
BSGH20003
25399
31.44
3”
BSGP20003
26010
40.66
3”
BSGT20003
27066
41.68
4”
BSGH20004
25401
31.44
4”
BSGP20004
26011
40.66
4”
BSGT20004
27075
41.68
5”
BSGH20005
25402
31.44
5”
BSGP20005
26012
40.66
5”
BSGT20005
27080
41.68
6”
BSGH20006
25403
31.44
6”
BSGP20006
26013
40.66
6”
BSGT20006
27099
41.68
8”
BSGH20008
25425
31.44
8”
BSGP20008
26014
40.66
8”
BSGT20008
27100
41.68
12” +
BSGH20012
25430
31.44
12” +
BSGP20012
26015
40.66
12” +
BSGT20012
27113
41.68
1”
BSGH22001
30914
$34.17
1”
BSGP22001
30396
$44.22
1”
BSGT22001
31156
$45.34
1-1/4”
BSGH220125
30915
34.17
1-1/4”
BSGP220125
30405
44.22
1-1/4”
BSGT220125
31159
45.34
1-1/5”
BSGH22015
30920
34.17
1-1/5”
BSGP22015
30434
44.22
1-1/5”
BSGT22015
31161
45.34
2”
BSGH22002
25433
34.17
2”
BSGP22002
26016
44.22
2”
BSGT22002
27134
45.34
2-1/2”
BSGH22025
25434
34.17
2-1/2”
BSGP22025
26021
44.22
2-1/2”
BSGT22025
27146
45.34
3”
BSGH22003
25449
34.17
3”
BSGP22003
26022
44.22
3”
BSGT22003
27151
45.34
4”
BSGH22004
25472
34.17
4”
BSGP22004
26024
44.22
4”
BSGT22004
27154
45.34
5”
BSGH22005
25455
34.17
5”
BSGP22005
26025
44.22
5”
BSGT22005
27163
45.34
6”
BSGH22006
25475
34.17
6”
BSGP22006
26028
44.22
6”
BSGT22006
27165
45.34
8”
BSGH22008
25486
34.17
8”
BSGP22008
26045
44.22
8”
BSGT22008
27166
45.34
12” +
BSGH22012
23596
34.17
12” +
BSGP22012
21049
44.22
12” +
BSGT22012
27167
45.3
1”
BSGH25001
30928
$38.21
1”
BSGP25001
30455
$49.49
1”
BSGT25001
31163
$50.85
1-1/4”
BSGH250125
30942
38.21
1-1/4”
BSGP250125
30456
49.49
1-1/4”
BSGT250125
31168
50.85
1-1/5”
BSGH25015
30947
38.21
1-1/5”
BSGP25015
26053
49.49
1-1/5”
BSGT25015
31173
50.85
2”
BSGH25002
30257
38.21
2”
BSGP25002
26054
49.49
2”
BSGT25002
27168
50.85
2-1/2”
BSGH25025
30268
38.21
2-1/2”
BSGP25025
26075
49.49
2-1/2”
BSGT25025
27169
50.85
3”
BSGH25003
30271
38.21
3”
BSGP25003
26081
49.49
3”
BSGT25003
27170
50.85
4”
BSGH25004
30287
38.21
4”
BSGP25004
26082
49.49
4”
BSGT25004
27172
50.85
5”
BSGH25005
30299
38.21
5”
BSGP25005
26086
49.49
5”
BSGT25005
27184
50.85
6”
BSGH25006
25499
38.21
6”
BSGP25006
26095
49.49
6”
BSGT25006
27224
50.85
8”
BSGH25008
25502
38.21
8”
BSGP25008
26104
49.49
8”
BSGT25008
27236
50.85
12” +
BSGH25012
23106
38.21
12” +
BSGP25012
21401
49.49
12” +
BSGT25012
27244
50.85
Bit Size
Part #
.220” Thickness
Cat #
List
Price
Bit Size
Part #
Cat #
List
Price
.220” Thickness
.250” Thickness
.220” Thickness
.250” Thickness
.250” Thickness
Loose segments include silver braze.
Cat # 00166 $1.00
80
CORE BIT SEGMENTS ONLY
.200” through .250” Thickness
Super Premium Red Plus Turbo
Segments Only
Specification: TSPSAG3+
Supreme Silver Segments Only
Specification: UOL
.200” Thickness
.200” Thickness
Part #
Cat #
List Price
Bit Size
Part #
Cat #
List Price
1”
BSGU20001
31586
$47.75
1”
BSGTSP+20001
31745
$38.78
1-1/4”
BSGU200125
31595
47.75
1-1/4”
BSGTSP+200125
31748
38.78
1-1/5”
BSGU20015
31604
47.75
1-1/5”
BSGTSP+20015
31754
38.78
2”
BSGU20002
27995
47.75
2”
BSGTSP+20002
28509
38.78
2-1/2”
BSGU20025
28001
47.75
2-1/2”
BSGTSP+20025
28539
38.78
3”
BSGU20003
28008
47.75
3”
BSGTSP+20003
28589
38.78
4”
BSGU20004
28012
47.75
4”
BSGTSP+20004
28592
38.78
5”
BSGU20005
28018
47.75
5”
BSGTSP+20005
23837
38.78
6”
BSGU20006
28031
47.75
6”
BSGTSP+20006
28615
38.78
8”
BSGU20008
28084
47.75
8”
BSGTSP+20008
08543
38.78
12” +
BSGU20012
28090
47.75
12” +
BSGTSP+20012
13568
38.78
.220” Thickness
1”
BSGU22001
1-1/4”
1-1/5”
.220” Thickness
31633
$52.01
1”
BSGTSP+22001
BSGU220125
31640
BSGU22015
31642
2”
BSGU22002
2-1/2”
3”
4”
5”
52.01
1-1/4”
BSGTSP+220125
31805
42.15
52.01
1-1/5”
BSGTSP+22015
31809
42.15
28283
52.01
2”
BSGTSP+22002
28629
42.15
BSGU22025
28293
52.01
2-1/2”
BSGTSP+22025
28630
42.15
BSGU22003
28092
52.01
3”
BSGTSP+22003
28651
42.15
BSGU22004
28118
52.01
4”
BSGTSP+22004
28656
42.15
BSGU22005
28134
52.01
5”
BSGTSP+22005
28665
42.15
6”
BSGU22006
28144
52.01
6”
BSGTSP+22006
28676
42.15
8”
BSGU22008
28150
52.01
8”
BSGTSP+22008
21810
42.15
12” +
BSGU22012
28165
52.01
12” +
BSGTSP+22012
08572
42.15
.250” Thickness
1”
BSGU25001
1-1/4”
1-1/5”
31803
$42.15
.250” Thickness
31658
$57.93
1”
BSGTSP+25001
BSGU250125
31677
BSGU25015
31678
2”
BSGU25002
2-1/2”
3”
31810
57.93
1-1/4”
BSGTSP+250125
31811
47.27
57.93
1-1/5”
BSGTSP+25015
31879
47.27
28167
57.93
2”
BSGTSP+25002
28689
47.27
BSGU25025
28180
57.93
2-1/2”
BSGTSP+25025
28704
47.27
BSGU25003
28191
57.93
3”
BSGTSP+25003
28707
47.27
4”
BSGU25004
28197
57.93
4”
BSGTSP+25004
28718
47.27
5”
BSGU25005
28202
57.93
5”
BSGTSP+25005
28720
47.27
6”
BSGU25006
28205
57.93
6”
BSGTSP+25006
17594
47.27
$47.27
8”
BSGU25008
28212
57.93
8”
BSGTSP+25008
28729
47.27
12” +
BSGU25012
28213
57.93
12” +
BSGTSP+25012
08589
47.27
NOTE: Bits 9” and above use part #’s ending in 12
Loose segments include silver braze.
Cat # 00166 $1.00
81
Core Bits
Bit Size
CORE BIT Information
Number of Segments on Wet Core Bits
Segment
Size
Uses segs for
1” bit
Uses segs for
1-1/4” bit
Core Bits
Uses segs for
1-1/2” bit
Core Bit
Diameter
Standard
Gold
Heavy Duty
Orange
Premium
Black
Pro
Blue
1
4
4
4
1
4
4
1 1/4
5
5
1 3/8
5
5
1 1/2
4
4
1 5/8
5
5
Super
Premium Red
Turbo
5
4
1 3/4
5
5
Uses segs for
2” bit
1 7/8
4
4
2
5
5
5
4
4
5
Uses segs for
2-1/4” bit
2 1/4
5
5
5
5
5
5
2 1/2
6
6
6
5
5
6
2 3/4
6
6
6
6
6
6
Uses segs for
3” bit
5
3
7
7
7
6
6
7
3 1/4
8
8
8
8
6
8
3 1/2
8
8
8
7
7
8
4
10
10
10
8
8
10
4 1/4
10
10
10
8
8
10
3 3/4
Uses segs for
4” bit
Use segs for
5” bit
Uses segs for
6” bit
Uses segs for
8” bit
Uses segs for
12” bit
4 1/2
11
11
11
9
9
11
5
12
12
12
10
10
12
5 1/2
13
13
13
11
11
13
6
14
14
14
12
12
14
6 1/4
14
14
14
12
12
14
6 1/2
15
15
15
13
13
15
7
14
16
16
14
16
8
16
16
16
16
18
9
18
18
18
18
10
20
20
20
20
20
12
24
24
24
24
24
14
28
28
28
28
16
30
30
30
30
18
30
30
30
20
32
32
24
38
38
26
40
40
28
44
44
30
47
47
32
49
49
34
52
52
36
56
56
38
60
60
40
62
62
42
65
65
44
68
68
46
71
71
48
74
74
82
CORE BIT OPTIONS - RESEGMENTING
We Will Re-Tip Your Worn Bit at a Savings to You
Resegmented Core Bits
Save money by recycling your used core bits.
The bigger the bit, the more you save.
Send us your used core bits, ours or a competitors, and we will cut off the end and put new
segments on it for a bit as good as new.
Core bits can be resegmented with most quality grades and bonds provided the tube is suitable.
Costs to Resegment Your Used Core Bits
Premium
Black
7/8”
$88
$97
140
1”
96
98
103
1-1/8”
100
103
108
1-1/4”
116
120
127
1-3/8”
123
125
132
1-1/2”
159
163
173
1-5/8”
163
168
178
1-3/4”
168
173
184
192
188
Standard
Gold
3/4”
Supreme
Silver
Pro
Blue
Super
Premium
Red
$101
$105
112
115
150
155
160
165
170
180
HD
Orange
Turbo
Premium
Super Premium
Black
Red Turbo
Turbo
Core Bits
Heavy
Duty
Orange
SIZE
$135
1-7/8”
2”
$172
193
198
194
2-1/4”
182
204
208
206
2-1/2”
209
235
239
236
2-3/4”
218
244
249
246
3”
245
276
281
278
3-1/4”
272
307
314
$194
$190
$208
198
211
223
237
240
252
252
265
279
282
296
3-1/2”
282
317
321
292
308
321
324
341
4”
352
358
363
371
352
383
387
408
4-1/4”
362
380
397
354
4-1/2”
389
421
430
373
395
425
431
452
5”
428
436
442
452
437
466
472
496
5-1/2”
447
503
513
6”
514
522
586
6-1/4”
524
562
596
6-1/2”
552
593
604
7”
573
668
683
472
541
531
614
674
8”
700
722
732
750
776
9”
722
736
751
803
886
10”
837
854
869
889
981
558
753
872
1,006
565
593
627
636
780
779
772
790
931
876
12”
964
984
1,003
14”
1,090
1,114
1,136
1,124
1,076
16”
1,200
1,224
1,228
18”
1,387
1,414
20”
1,484
1,513
24”
1,803
1,841
*Call Customer Service for Additional Services
83
CORE BIT INFORMATION
Number of Segments on a Core Bit & RPM Charts
Core Bits
Segmented Core Bit Recommended
R.P.M. Reference Chart
Bit Diameter
Minimum
RPM
Maximum
RPM
Ideal RPM
5/16"
7639
12736
10182
1/2"
4775
7960
6364
5/8"
3820
6368
5091
Carbide/Plate Cutter Core Bit Recommended
R.P.M. Reference Chart
Bit Diameter
Minimum
RPM
Maximum
RPM
Ideal RPM
3/4"
3183
5307
4242
1/2"
458
900
611
7/8"
2728
4549
3636
5/8"
367
900
489
1"
2387
3980
3182
3/4"
306
900
407
1-1/5"
1989
3317
2652
7/8"
262
900
349
1-1/8"
2122
3538
2828
1"
229
350
306
1-1/4"
1910
3184
2545
1-1/8"
204
350
272
1-3/8"
1736
2895
2314
1-1/4"
183
350
244
1-1/2"
1592
2653
2121
1-3/8"
167
350
222
1-5/8"
1469
2449
1958
1-1/2"
153
350
204
1-3/4"
1364
2274
1818
1-5/8"
141
350
188
1-7/8"
1273
2123
1697
1-3/4"
131
350
175
2"
1194
1990
1591
1-7/8"
122
350
163
2-1/4"
1061
1769
1414
2"
115
350
153
2-3/8"
1005
1676
1340
2-1/2"
92
350
122
2-1/2"
955
1592
1273
3"
76
350
102
2-3/4"
868
1447
1157
3-1/2"
65
350
87
3"
796
1327
1061
4"
57
350
76
3-1/4"
735
1225
979
5"
46
350
61
3-1/2"
682
1137
909
6"
38
350
51
4"
597
995
795
4-1/4"
562
937
749
4-1/2"
531
884
707
5"
477
796
636
5-1/2"
434
724
579
6"
398
663
530
6-1/4"
382
637
509
6-1/2"
367
612
490
7"
341
569
455
8"
298
498
398
9"
265
442
354
10"
239
398
318
12"
199
332
265
14"
171
284
227
16"
149
249
199
18"
133
221
177
20"
119
199
159
22"
109
181
145
24"
99
166
133
26"
92
153
122
28"
85
142
114
30"
80
133
106
32"
75
124
99
34"
70
117
94
36"
66
111
88
38"
63
105
84
40"
60
100
80
42"
57
95
76
44"
54
90
72
46"
52
87
69
48"
50
83
66
Dry Hole Saw and Dry Vacuum Core Bit
Recommended R.P.M. Reference Chart
Bit Diameter
84
Minimum
RPM
Maximum
RPM
Ideal RPM
7/8"
2300
6000
5457
1"
2300
6000
4775
1-1/4"
2300
6000
3820
1-1/2"
1600
5000
3183
1-3/4"
1600
5000
2728
2"
1200
5000
2387
2-1/4”
1200
5000
2122
2-1/2"
1200
5000
1910
3"
800
5000
1592
3-1/2"
800
5000
1364
4"
700
5000
1241
4-1/2”
700
5000
1103
5"
700
3500
993
6"
600
2500
828
TYROLIT ABRASIVES
Cut Off
Wheels
Flap
Discs
Resin Fiber Discs
Flaring Cup Wheels,
Grinding Stones & Rubs
Wire Brushes
Tyrolit Abrasives
Grinding
Wheels
Application Icons
0-5o grinding,
brushing,
drilling &
mortar raking
Material Icons
Steel
2-in-1: Steel/Stainless Steel
Stainless Steel: INOX
30o grinding
Angle Grinder
Straight Grinder
Angle Grinder
High Speed Saw
Cast Materials
Masonry
Aluminum &
Non-Ferrous Materials
90o cutting off
MACHINE Icons
Asphalt
Bench Grinder
Chop Saw
Hand-Guided
Portable Electric
Saw
Low HP
Walk Behind Saw
Stationary Saw
Concrete
PVC
86
ABRASIVES
SAFETY INFORMATION
Handle Grinding Wheels Safety
Safety is everyone’s business in both the application and care of grinding wheels. Wheels improperly used may not only be
breakable - they can be dangerous. Grinding wheel operation must always be in strict compliance with the American National
Standards Institute (ANSI) B7.1 Safety Requirements and the Occupational Safety and Health Act which regulates speed; safety
guards; flanges; mounting procedures; general operating rules; handling, storage and inspection; and general machine conditions.
WARNING!!!
WARNING!!!
IMPROPER USE MAY CAUSE GRINDING
WHEEL BREAKAGE AND SERIOUS INJURY.
AIRBORNE PARTICULATES AND FUMES GENERATED
BY THE GRINDING PROCESS MAY CAUSE INJURY
TO THE EYES AND
SKIN AND SERIOUS
RESPIRATORY ILLNESS.
These airborne concentrations are produced by the
material being ground, the coolant and the grinding
wheel. Consult the MATERIAL SAFETY DATA
SHEETS for each material involved in the process.
Always use adequate ventilation, dust control and
NIOSH and MSHA approved personal protective
equipment appropriate for the grinding process involved.
DON’T OVERSPEED, ABUSE, OR DROP
WHEEL ALWAYS USE A GUARD, PERSONAL
PROTECTIVE EQUIPMENT AND PROPER
MOUNTING PROCEDURES.
DO:
DON’T:
1. DO always HANDLE AND STORE wheels in a careful
manner.
2. DO VISUALLY INSPECT all wheels for possible
damage before mounting.
3. DO MAKE SURE MACHINE SPEED does not exceed
MAXIMUM OPERATING SPEED marked on wheel or
its container.
4. DO CHECK MOUNTING FLANGES for equal size,
relieved as required and correct diameter.
(Should be at least 1/3 diameter of the wheel.)
5. DO USE MOUNTING BLOTTERS supplied with wheels.
6. DO be sure WORK REST is properly adjusted on bench
and floor stand grinders. (Should be center of wheel or
above and no more than 1/8” away from wheel.)
7. DO always USE A PROPERLY DESIGNED SAFETY
GUARD covering at least on half of the grinding wheel.
8. DO allow WHEELS to run at operating speed, with
guard in place, for at least one minute before grinding.
9. DO always WEAR SAFETY GLASSES or equivalent
proper eye protection when grinding.
10. DO TURN OFF COOLANT before stopping wheel to
avoid creating an out-of-balance condition.
11. DO make sure work is held FIRMLY in place. CLAMP
work when using non-reinforced cut-off wheels.
12. DO CHECK THE SPEED OF THE GRINDER as
recommended in ANSI B7.1 Safety Requirements.
1. DON’T use a wheel that HAS BEEN DROPPED or
DAMAGED or appears to have been abused.
2. DON’T FORCE a wheel onto the machine OR ALTER
the size of the mounting hole - if wheel won’t fit the
machine, get one that will.
3. DON’T ever EXCEED MAXIMUM OPERATING SPEED
established for the wheel.
4. DON’T use mounting flanges on which the bearing
surfaces ARE NOT CLEAN, FLAT AND FREE FROM
BURRS.
5. DON’T TIGHTEN the mounting nut EXCESSIVELY.
6. DON’T grind on the SIDE OF THE WHEEL unless
wheel is specifically designed for that purpose.
(See the current ANSI B7.1 Safety Requirements for
exceptions.)
7. DON’T start the machine until the WHEEL GUARD IS
IN PLACE.
8. DON’T STAND DIRECTLY IN FRONT of a grinding
wheel whenever a grinder is started.
9. DON’T grind without proper ventilation and personal
protective equipment (See ANSI B7.1)
10. DON’T grind material for which the WHEEL IS NOT
DESIGNED.
11. DON’T JAM work into the wheel. NEVER JAM, TWIST,
BEND OR TILT a cult-off wheel when cutting.
12. DON’T GRIND with a machine that vibrates excessively.
87
Tyrolit Abrasives
CAUTION: Comply with American National Standards
Institute Code B7.7, Occupational Safety and Health
Act and Safety Guide with Packaging.
TYROLIT DEPRESSED CENTER WHEELS for Cutting & Light Grinding
Tyrolit PREMIUM 2-in-1 Wheels for Steel and Stainless Steel - Type 27
Type 27
·
·
·
·
·
Aluminum oxide grain
High performance, aggressive, fast cutting
Designed for cutting steel and stainless steel
For cutting solid materials, tubes, profiles and thin-wall materials
Contaminate-free/iron, sulfer and chlorine <0.1%
SIZE
Specification Max Safe RPM Material #
4-1/2” x 3/32” x 7/8”
A30Q-BFXA
13280
872346
4-1/2” x 3/32” x 5/8”-11 A30Q-BFXA
13280
233199
5” x 3/32” x 7/8”
A30Q-BFXA
12220
872347
Cat # Unit Pkg. Qty.
79647
25
20626
10
16554
25
«««
List Price
$2.98
6.78
3.60
Tyrolit PREMIUM Wheels for Aluminum & Non-Ferrous Materials - Type 27
30o
Tyrolit Abrasives
Right Angle
Grinder
· Aluminum oxide grain
· High performance cut-off wheels designed especially for non-ferrous metals
such as aluminum, titanium, copper, brass, bronze and nickel
· Special bond prevents loading on soft non-ferrous metals
· Contaminate-free/iron, sulfur and chlorine <0.1%
«««
SIZE
Specification Max Safe RPM
4-1/2” x 1/8” x 7/8”
A36NBFX
13280
4-1/2”x 1/8”x 5/8”-11
A36NBFX
13280
Material #
5289
913335
Cat #
64571
68291
Unit Pkg. Qty.
10
10
List Price
$5.01
7.31
Tyrolit BASIC Wheels for General Purpose Use - Steel - Type 27
90o
Right Angle
Grinder
·
·
·
·
General purpose cutting & light grinding wheels for steel
Good cutting rate and wheel life
For all cross sections
SIZE
4” x 1/8” x 3/8”
A30BF
15270
4” x 1/8” x 5/8”
A30BF
15270
4-1/2” x 1/8” x 7/8”
A30BF
13280
4-1/2” x 1/8”x 5/8”-11
A30BF
13280
5” x 1/8” x 7/8”
A30BF
12220
5” x 1/8” x 5/8”-11
A30BF
12220
7” x 1/8” x 7/8”
A30BF
8600
7” x 1/8” x 5/8”-11
A30BF
8600
9” x 1/8” x 7/8”
A30BF
6640
9” x 1/8” x 5/8”-11
A30BF
6640
Material #
20006667
20006668
20006669
20006670
20006671
20010579
20006672
20006673
20006674
20006675
Cat #
59887
58773
58770
58695
59562
72258
59363
58822
58994
59239
Unit Pkg. Qty.
25
25
25
10
25
10
25
10
25
10
«
List Price
$1.78
1.78
2.15
4.04
2.58
4.64
3.91
6.88
5.54
8.73
Tyrolit BASIC Wheels for General Purpose Use - Concrete/Masonry - Type 27
· Silicon carbide grain
· General purpose cutting & light grinding wheels for concrete, masonry
and stone
· Good cutting rate and wheel life
· High side stability for difficult applications
«
SIZE
4-1/2” x 1/8” x 7/8”
4-1/2” x 1/8” x 5/8”-11
7” x 1/8 x 7/8
7” x 1/8” x 5/8”-11
Specification
C30BF
C30BF
C30BF
C30BF
Max Safe RPM
13280
13280
8600
8600
88
Material #
20010585
20010586
20010635
20010636
Cat #
69224
69226
74309
74329
Unit Pkg. Qty.
10
10
10
10
List Price
$2.18
4.04
4.26
4.94
TYROLIT DEPRESSED CENTER WHEELS for Cutting & Light Grinding
Tyrolit PREMIUM 2-in-1 Wheels for Steel and Stainless Steel
Pipeline Applications - Type 27
· High performance, aggressive and fast cutting/light grinding/notching
· Designed for both steel and stainless steel
«««
· Contaminate-free iron, sulfer and chlorine, <0.1%
SIZE
4-1/2” x 1/8” x 5/8”
A30QBFX
13280
4-1/2”x1/8” x 5/8”-11
A30QBFX
13280
5” x 1/8” x 7/8”
A30QBFX
12220
7” x 1/8” x 7/8”
A30QBFX
8600
7” x 1/8” x 5/8”-11
A30QBFX
8600
9” x 1/8” x 7/8”
A30QBFX
6640
9” x 1/8” x 5/8”-11
A30QBFX
6640
Material #
5287
898115
5308
5349
898116
5406
898118
Cat #
59084
67133
74486
59852
65108
62349
65412
Unit Pkg. Qty.
25
10
25
25
10
25
10
Type 27
List Price
$3.93
7.21
5.08
7.01
10.70
9.94
13.14
30o
Angle Grinder
Tyrolit PREMIUM Pipeliner Plus Wheels for Steel and Cast Materials - Type 27
SIZE
4-1/2” x 1/8” x 7/8”
4-1/2” x 1/8” x 5/8”-11
5” x 1/8” x 7/8”
5” x 1/8” x 5/8”-11
7” x 1/8” x 7/8”
7” x 1/8” x 5/8”-11
9” x 1/8” x 7/8”
9” x 1/8” x 5/8”-11
High quality zirconia alumina grain
High performance, aggressive, fast cutting/light grinding/notching
Designed specifically for the pipeline industry
For the most demanding applications
«««
Designed for both metal and cast materials
Specification
ZA24-BF
ZA24-BF
ZA24-BF
ZA24-BF
ZA24-BF
ZA24-BF
ZA24-BF
ZA24-BF
Max Safe RPM
13280
13280
12220
12220
8600
8600
6640
6640
Material #
352336
352334
356632
356633
352339
3523338
352341
352340
Cat #
27007
27012
27015
27022
27023
27024
27025
27033
Unit Pkg. Qty.
10
10
10
10
10
10
10
10
List Price
$4.59
7.77
5.22
8.32
10.30
14.52
16.42
19.92
Tyrolit BASIC Specialty Wheels for Aluminum, Non-Ferrous Materials
and Stainless Steel - Type 27
· Aluminum oxide/silicon carbide grain blend
· Designed specifically for grinding aluminum and stainless steel
· Very good cut rate and life without loading
SIZE
4” x 1/4” x 5/8”
4-1/2” x 1/4” x 7/8”
4-1/2” x 1/4” x 5/8-”11
7” x 1/4” x 7/8”
7” x 1/4” x 5/8”-11
Specification
AC30BF-AL/SS
AC30BF-AL/SS
AC30BF-AL/SS
AC30BF-AL/SS
AC30BF-AL/SS
Max Safe RPM
15270
13280
13280
8600
8600
Material #
20006689
20006690
20006691
20008347
20006692
89
Cat #
60269
59586
58727
59293
59367
«
Unit Pkg. Qty.
10
10
10
10
10
List Price
$2.61
3.43
5.17
5.46
8.48
Tyrolit Abrasives
·
·
·
·
·
TYROLIT DEPRESSED CENTER WHEELS for Grinding
Tyrolit BASIC Wheels for Concrete/Masonry - Type 27
· General purpose wheel for rough grinding of concrete, masonry and stone
«
· Very good stock removal rates and wheel life
Type 27
30o
Angle Grinder
SIZE
4” x 1/4” x 5/8”
C30BF
15270
4-1/2” x 1/4” x 7/8”
C30BF
13280
4-1/2” x 1/4” x 5/8”-11
C30BF
13280
5” x 1/4” x 7/8”
C30BF
12220
5” x 1/4” x 5/8”-11
C30BF
12220
7” x 1/4” x 7/8”
C30BF
8600
7” x 1/4” x 5/8”-11
C30BF
8600
9” x 1/4” x 7/8”
C30BF
6640
9” x 1/4” x 5/8”-11
C30BF
6640
Material #
20007745
20006654
20006656
20006658
20010584
20006660
20006662
20006664
20006666
Cat #
58772
59604
59605
63955
83269
59606
60211
61337
60772
Unit Pkg. Qty.
10
10
10
10
10
10
10
10
10
List Price
$2.34
2.46
4.80
3.66
5.45
4.95
8.08
7.23
10.68
Tyrolit BASIC Wheels for Steel - Type 27
Tyrolit Abrasives
· General purpose wheel for ferrous metals - surface or edge grinding
«
· Very good stock removal rates and wheel life
SIZE
3” x 1/4” x 3/8”
4” x 1/4” x 3/8”
4” x 1/4” x 5/8”
4-1/2” x 1/4” x 7/8”
4-1/2” x 1/4” x 5/8”-11
5” x 1/4” x 7/8”
5” x 1/4” x 5/8”-11
6” x 1/4” x 7/8”
6” x 1/4” x 5/8”-11
7” x 1/4” x 7/8”
7” x 1/4” x 5/8”-11
9” x 1/4” x 7/8”
9” x 1/4” x 5/8”-11
Specification
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
Max Safe RPM
18000
15270
15270
13280
13280
12220
12220
10200
10200
8600
8600
6640
6640
Material #
20008290
20006651
20006652
20006653
20006655
20006657
20010581
20016035
20016036
20006659
20006661
20006663
20006665
Cat #
58938
58781
58821
58717
58819
58694
68573
76862
76863
58774
58652
58775
58771
Unit Pkg. Qty.
10
10
10
10
10
10
10
10
10
10
10
10
10
List Price
$1.73
1.73
1.73
2.46
4.59
3.11
5.18
3.94
6.38
4.38
7.75
6.52
9.72
Tyrolit PREMIUM 2 in 1 Wheels for Steel & Stainless Steel - Type 27
· High performance rough grinding wheels designed especially for steel
and stainless steel
· Excellent stock removal rates and exceptional wheel life
· Contaminate-free iron/sulfur and chlorine, <0.1%
«««
SIZE
4” x 1/4” x 5/8”
4-1/2” x 1/4” x 7/8”
4-1/2” x 1/4” x 5/8”-11
5” x 1/4” x 7/8”
7” x 1/4” x 7/8”
7” x 1/4” x 5/8”-11
9” x 1/4” x 7/8”
9” x 1/4” x 5/8”-11
Specification
A30Q-BFXA
A30Q-BFXA
A30Q-BFXA
A30Q-BFXA
A30Q-BFXA
A30Q-BFXA
A30Q-BFXA
A30Q-BFXA
Max Safe RPM
15270
13280
13280
12220
8600
8600
6640
6640
90
Material #
5278
5293
898119
5313
1421
898120
5412
898121
Cat #
59850
59268
64380
59269
59478
64639
59952
64640
Unit Pkg. Qty.
10
10
10
10
10
10
10
10
List Price
$3.22
4.47
7.97
5.19
7.95
11.58
11.79
15.51
TYROLIT ABRASIVES RAISED HUB GRINDING WHEELS
Tyrolit BASIC High Performance Zirconia Wheels for Steel & Cast Materials - Type 27
· Zirconia alumina grain
· High performance grinding wheel for the most demanding applications
Type 27
· Highest stock removal rates and ultimate wheel life
· Designed for ferrous metals, stainless steel and cast materials
SIZE
Specification
3” x 1/4” x 3/8”
ZA30BF
4” x 1/4” x 3/8”
ZA30BF
4” x 1/4” x 5/8”
ZA30BF
4-1/2” x 1/4” x 7/8”
ZA30BF
4-1/2” x 1/4” x 5/8”-11
ZA30BF
5” x 1/4” x 7/8”
ZA30BF
5” x 1/4” x 5/8”-11
ZA30BF
7” x 1/4” x 7/8”
ZA30BF
7” x 1/4” x 5/8”-11
ZA30BF
9” x 1/4” x 7/8”
ZA30BF
9” x 1/4” x 5/8”-11
ZA30BF
Max RPM
18000
15270
15270
13280
13280
12220
12220
8600
8600
6640
6640
Material #
20010212
20006680
20006681
20006682
20006683
20006684
20010582
20006685
20006686
20006687
20006688
Cat #
61012
59046
59603
59130
58824
60584
67729
58842
58696
58784
59129
Unit Pkg. Qty.
10
10
10
10
10
10
10
10
10
10
10
«
List Price
$5.77
6.86
6.86
7.12
8.43
8.53
10.12
10.71
12.58
14.66
16.49
Right Angle
Grinder
·
·
·
·
·
SIZE
7” x 1/4” x 7/8”
7” x 1/4” x 5/8”-11
9” x 1/4” x 7/8”
9” x 1/4” x 5/8”-11
Zirconia alumina grain
High performance grinding wheel for the most demanding applications
Highest stock removal rates and ultimate wheel life
Designed for ferrous metals, stainless steel and cast materials
Type 28 saucer shape provides greater surface area coverage and
provides the operator with better grinding visibility
«
Specification
A30BF
A30BF
A30BF
A30BF
Max RPM
8600
8600
6640
6640
Material #
20006676
20006677
20006678
20006679
Cat #
59420
58892
59240
59635
Unit Pkg. Qty.
10
10
10
10
List Price
$6.89
9.22
11.28
13.73
Tyrolit BASIC Raised Hub Dish Wheels for Concrete/Masonry - Type 28
·
·
·
·
SIZE
7” x 1/4” x 7/8”
7” x 1/4” x 5/8”-11
9” x 1/4” x 7/8”
9” x 1/4” x 5/8”-11
Zirconia alumina grain
High performance grinding wheel for the most demanding applications
Very good stock removal rates and wheel life
Type 28 saucer shape provides greater surface area coverage and
provides the operator with better grinding visibility
«
Specification Max RPM
C30BF
8600
C30BF
8600
C30BF
6640
C30BF
6640
Material #
20016031
20016032
20016033
20016034
Cat #
76151
76153
76154
76155
91
Unit Pkg. Qty.
10
10
10
10
List Price
$7.23
9.25
11.86
13.85
Type 28
Right Angle
Grinder
Tyrolit Abrasives
Tyrolit BASIC Grinding Wheels for Steel - Type 28
TYROLIT ABRASIVES SUPER-THIN CUT-OFF WHEELS
Tyrolit BASIC Wheels for INOX, Steel & Stainless Steel - Type 1
·
·
·
·
·
·
Type 1
90o
Right Angle
Grinder
SIZE
4” x .040 x 5/8”
4-1/2” x .040 x 7/8”
5” x .040 x 7/8”
6” x .045 x 7/8”
General purpose wheel for cutting INOX, steel and stainless steel
For cutting thin-wall metal sheets, profiles and tubes
Good cutting rates and wheel life
Excellent price & performance ratio
Contaminate-free of iron, sulfur and chlorine, <0.1%
A60-BF
15270
WA60-BF
13280
WA60-BF
12220
WA60-BF
10200
Material #
222893
486473
486475
591956
18567
25
18568
25
18569
25
17963
25
«
List Price
$1.99
2.06
2.18
2.54
Tyrolit Abrasives
Tyrolit PREMIUM 2-in-1 Wheels for Steel & Stainless Steel - Type 1
· Premium aluminum oxide grain
· Aggressive, fast cutting wheels for steel and stainless steel
· Very good wheel life
«««
· Contaminate-free of iron, sulfur, chlorine, <0.1%
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
4” x .060 x 5/8”
A46-BF
15270
368016
15105
25
4-1/2” x .040 x 7/8”
A60Q-BFXA
13280
77965
65335
25
4-1/2” x .060 x 7/8”
A46Q-BFXA
13280
77963
65336
25
5” x .040 x 7/8”
A60Q-BFXA
12220
77966
65337
25
5” x .060 x 7/8”
A46Q-BFXA
12220
77964
65338
25
6” x .045 x 7/8”
A60Q-BFXA
10200
63812
58952
50
6” x .060 x 7/8”
A46Q-BFXA
10200
920351
59368
25
7’ x .060 x 7/8”
A46Q-BFXA
8600
920352
62831
25
9” x .075 x 7/8”
A46Q-BFXA
6640
920353
62832
25
Reusable Metal Adapter Flanges
for Dish Wheels
Type
Spec
Material #
Cat #
List
Price
Adapter
SF113
20007845
59242
$39.67
Nut
S113
20007890
59602
17.77
Reusable Metal Adapter Flanges
All 7” and 9” raised hub dish wheels, except those
with ready mount adapters, require mounting with
properly designed adapter flanges.
92
List Price
$2.48
2.48
2.64
2.60
2.88
3.28
3.60
4.11
5.53
Tyrolit PREMIUM Long Life Wheels for Steel - Type 1
Type 1
· High performance cut-off wheels designed especially for steel
· Hard “S” bond provides exceptionally long life
«««
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
4-1/2” x .040 x 7/8”
A60S-BFXA
13280
913181
58815
25
$2.48
2.64
2.60
2.88
4-1/2” x .060 x 7/8”
A46S-BFXA
13280
867822
58814
25
5” x .040 x 7/8”
A60S-BFXA
12220
913182
58904
25
5” x .060 x 7/8”
A46S-BFXA
12220
936979
58905
25
90o
Right Angle
Grinder
Tyrolit PREMIUM INOX Super Thin Cut-Off Wheels for Stainless Steel - Type 1
Type 1
«««
SIZE
Specification
4-1/2” x .040 x 7/8”
A60R-BFXA
Max RPM Material #
13280
41502
Cat #
Unit Pkg. Qty.
78391
25
4-1/2” x .060 x 7/8”
A46R-BFXA
13280
35952
82761
25
5” x .040 x 7/8”
A60R-BFXA
12220
41503
78884
25
5” x .060 x 7/8”
A46R-BFXA
12220
35954
89220
25
6” x .045 x 7/8”
A46R-BFXA
10200
318945
97708
25
6” x .060 x 7/8”
A46R-BFXA
10200
291583
94002
25
7” x .060 x 7/8”
A46R-BFXA
8600
291588
21143
25
List Price
$2.93
3.11
3.03
3.37
3.79
3.93
5.33
Tyrolit PREMIUM Grinding Wheels for Aluminum & Non-Ferrous Materials - Type 27
· ·Aluminum
AluminumOxide
oxide Grain
grain
· ·High
performance,
rough
grinding wheels
for non-ferrous
metals
Ultimate performance
characteristics
in cutting
material made
of rust
· No
loading
and acid resistant steels
· ·For
surface and edge
grinding
Contaminate-free
of iron,
sulfur and chlorine, <0.1%
· Contaminant-free/iron, sulfur and chlorine <0.1%
«««
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
4-1/2” x 1/4” x 7/8”
A36NBFX
13280
5295
61021
10
4-1/2” x 1/4” x 5/8”-11
A36NBFX
13280
913325
68797
10
7” x 1/4” x 7/8”
A36NBFX
8600
5365
69049
10
7” x 1/4” x 5/8”-11
A36NBFX
8600
913331
68538
10
93
List Price
$6.52
7.30
9.36
11.87
90o
Right Angle
Grinder
Type 27
Right Angle
Grinder
Why use
Super-Thin?
•Ease of operation
•Clean cutting surfaces
•Shorter cutting times
minimal burring
•Less cutting waste
and dust
•Reduced machine load
•Suitable for various
materials
Tyrolit Abrasives
· Ultimate performance characteristics in cutting material made of rust
· Contaminate-free of iron, sulfur and chlorine, <0.1%
Tyrolit PREMIUM Super Thin Cutting Wheels for Aluminum & Stone - Type 1
·Silicon carbide grain
·High performance cut-off wheels especially for aluminum, concrete
and stone
·Fast cutting times on aluminum, bronze, aluminum alloys, copper,
brass, nickel, and titanium.
·Also suitable for cutting masonry materials.
«««
·Consistent free cutting wheel utilizing a non-loading bond.
Type 1
90o
Right Angle
Grinder
SIZE
4-1/2” x .040 x 7/8”
Specification
C46S-BFXA
Max RPM
13280
Material #
337383
Cat #
14271
Unit Pkg. Qty.
25
List Price
5” x .040 x 7/8”
C46S-BFXA
12220
342978
14274
25
2.84
$2.58
Tyrolit Abrasives
Tyrolit PREMIUM 2-in-1 Wheels for Steel & Stainless Steel - Type 27
· Ultimate performance characteristics in cutting material made of rust
· Depressed center configuration
«««
Type 27
Right Angle
Grinder
SIZE
4-1/2” x .040 x 7/8”
4-1/2” x .060 x 7/8”
5” x .040 x 7/8”
6” x .045 x 7/8”
Specification
A60Q-BFXA
A60Q-BFXA
A60Q-BFXA
A60Q-BFXA
Max RPM
13280
13280
12220
10200
Material #
87215
238987
87216
118477
Cat #
59503
90834
60214
68874
Unit Pkg. Qty.
25
25
25
25
List Price
$2.65
2.95
2.81
3.50
Tyrolit PREMIUM INOX Wheels for Stainless Steel & Acid-Resistant Steel - Type 27
Type 27
Right Angle
Grinder
Each flange kit contains
one pair of equally
matched reusable 1-5/8”
flanges. For use with
4-1/2”, 5” and 6” straight
cut-off Super thin wheels
with 7/8” hole on all right
angle grinders
·
·
·
·
·
SIZE
Ultimate performance wheel for cutting steel and stainless steel
For cutting thin-wall metal sheets, profiles and tubes
Contaminate-free of iron, sulfur and chlorine, <0.1%
Depressed center configuration
Specification
Max RPM
Material #
Cat #
«««
Unit Pkg. Qty.
List Price
4-1/2” x .045 x 7/8”
TA60P-BFXA
13280
472863
14266
25
$3.14
5” x .045 x 7/8”
TA60P-BFXA
12220
458870
14267
25
3.30
6” x .045 x 7/8”
TA60P-BFXA
10200
458871
14268
25
4.04
Flange and Wrench Kits
Description
Material #
Matched Flanges
20013391
Spanner Wrench - for use 20010522
with flanges
Cat #
63707
List Price
$66.11
66953
25.22
94
Threaded Flange
.040 Ultra Thin
Spanner Wrench
Threaded Flange
TYROLIT ABRASIVES XPERT SMALL DIAMETER CUT-OFF WHEELS
Tyrolit BASIC Small Diameter Cut Off Wheels Side Reinforced for Steel and Cast Material - Type 1
·
·
·
·
·
·
Max RPM
3” x 1/32” x 1/4”
3” x 1/32” x 3/8”
3” x 1/16” x 1/4”
3” x 1/16” x 3/8”
3” x 3/32” x 1/4”
3” x 3/32” x 3/8”
3” x 1/8” x 3/8”
4” x 1/32” x 1/4”
4” x 1/32 x 3/8”
4” x 1/32” x 5/8”
4” x 1/16” x 1/4”
4” x 1/16” x 3/8”
4” x 1/16” x 5/8”
4” x 3/32” x 5/8”
4” x 3/32” x 3/8”
4” x 1/8” x 1/4”
4” x 1/8” x 3/8”
25,000
25,000
25,000
25,000
25,000
25,000
25,000
19,100
19,100
19,100
19,100
19,100
19,100
19,100
19,100
19,100
19,100
Coarse A36
Material #
--20008032
20006721
20010548
20006735
20006737
---20006726
20006728
20006730
20010556
--20006732
Coarse A36
Cat #
--59085
58697
72053
58825
59610
---59611
58660
59612
78295
--58818
Type 1
«
Pkg Med/Fine A60 Med/Fine A60
Qty Material #
Cat #
-20008031
58812
-20006719
58720
100
20006720
59002
40
20008026
59614
25
20010566
73705
50
20006736
59615
50
20006722
59477
-20006723
59616
-20006724
59100
-20006725
59476
100
20006727
59617
40
20006729
59618
40
20006731
59619
25
20010577
77640
-20006739
59620
-20010574
73485
25
20006733
59621
Pkg
Qty
75
75
40
40
25
50
50
100
75
75
100
100
40
25
50
25
50
List Price
$1.49
1.49
1.49
1.49
1.56
1.56
1.93
2.07
2.07
2.07
2.12
2.12
2.12
2.14
2.14
2.22
2.22
Straight grinder
1/4” Metal Adaptor
Cat # 70030 - $13.00
3/8” Metal Adaptor
Cat # 70031 - $16.27
Tyrolit BASIC Portable Electric Saw Wheels for Steel - Type 1
· Designed for cutting all ferrous metals (or masonry, concrete option)
with portable circular saws
· General purpose wheel with good cut rates and life
· Integrated diamond knockout adapter
SIZE
7” x 1/8” x 5/8”
8” x 1/8” x 5/8”
Material #
Cat #
Unit Pkg. Qty.
A30BF
8600
20006710
58517
25
A30BF
7650
20006711
58519
25
XPERT Portable Electric Saw Wheels for Masonry - Type 1
C30BF
8600
20006713
58518
25
C30BF
7650
20006714
58520
25
7” x 1/8” x 5/8”
8” x 1/8” x 5/8”
Type 1
«
List Price
$3.24
4.13
Electric
Circular Saw
3.38
4.37
Tyrolit BASIC Chop Saw Wheels for Steel - Type 1
· Single Reinforced General Purpose - fast, burr-free cuts in metal and
cutting steel studs, rebar and lighter gauge metals
· Double Reinforced Stud Cutter - good for steel studs, rebar and light
gauge metal
· Premium - Extreme life with fast cutting
SIZE
12” x 7/64” x 1”
14” x 7/64” x 1”
16” x 7/64” x 1”
12” x 3/32” x 1”
14” x 3/32” x 1”
16” x 3/32” x 1”
12” x 1/8” x 1”
14” x 1/8” x 1”
Single Reinforced - General Purpose
Max RPM
Material #
Cat #
5100
20006707
59622
4400
20006708
58811
3850
20006709
59623
Double Reinforced Stud Cutter
A36BF
5100
30013029
59187
A36BF
4400
30011735
58810
A36BF
3850
30013030
58777
Premium
A30N-BF02M
5100
643371
86643
A30N-BF02M
4400
408229
81805
Specification
A36BF
A36BF
A36BF
95
Unit Pkg. Qty.
10
10
10
List Price
5.89
6.90
11.23
10
10
10
7.18
8.66
12.23
10
10
21.57
26.86
«
Type 1
Chop Saw
Low HP Machines
Tyrolit Abrasives
SIZE
General purpose cutting wheel for all metals
Side reinforced for increased life
For cutting thinwall material and deburring
A36 for fast cutting on rough applications
A60 for smooth, burr-free cuts
TYROLIT ABRASIVES CUT-OFF and WALK BEHIND WHEELS
Tyrolit BASIC Stationary Cut-Off Wheels for Steel - Type 1
· General purpose cut-off wheels designed for higher horsepower
stationary cut-off machines
· Designed to make straight cuts in structural steel, solids, pipe
and tubing
Type 1
Stationary
Cut-Off Saws
SIZE
10” x 1/8” x 5/8”
10” 1/8” x 1”
12” x 1/8” x 1”
14” x 1/8” x 1”
16” x 1/8” x 1”
16” x 5/32” x 1”
18” x 5/32” x 1”
20” x 5/32” x 1”
Specification
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
A30BF
Max RPM
6150
6150
5100
4400
3850
3850
3400
3100
Material #
20006697
20006698
20006699
20006700
20006701
20006702
60006703
20006704
Cat #
58823
58649
58816
58765
58817
59625
59626
58813
Unit Pkg. Qty.
10
10
10
10
10
10
5
5
«
List Price
$9.00
9.00
10.27
13.06
16.13
18.47
27.42
34.25
Tyrolit BASIC Stationary Cut-Off Wheels for Masonry/Concrete - Type 1
· General purpose cut-off wheels designed for higher horsepower
stationary cut-off machines
Tyrolit Abrasives
· Designed to make straight cuts in masonry, concrete, stone and brick
SIZE
12” x 1/8” x 1”
14” x 1/8” x 1”
Specification
C30BF
C30BF
Max RPM
5100
4400
Material #
20006706
20008024
Cat #
59627
59628
Unit Pkg. Qty.
10
10
«
List Price
$10.38
14.76
Tyrolit BASIC Cold & Hot Pressed Walk Behind Wheels for Concrete - Type 1
· Silicon carbide grain - designed for cutting concrete, masonry, brick on
all low HP walk-behind machines
· Fast cutting and good life with triple reinforcement for added safety
· Hot pressed wheels combine fast cutting action with extremely long life
· The hot press process enhances wheel life and strength - use on <18HP
· Suitable for concrete, green concrete and asphalt
«
Type 1
Low HP
Walk Behind Saws
SIZE
14” x 3/16” x 1”
14” x 1/4” x 1”
18” x 1/4” x 1”
18” x 3/8” x 1”
14” x 3/16” x 1”
14” x 1/4” x 1”
18” x 1/4” x 1”
18” x 3/8” x 1”
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
CP
4400
30015063
69238
10
CP
4400
34912
34912
10
CP
3400
ABCC18250
37741
10
CP
3400
ABCP18375
34918
10
Hot Pressed Walk Behind Wheels for Concrete - Type 1
CHP
4400
30015060
59631
5
CHP
4400
30015061
59632
5
CHP
3400
30015062
59633
5
CHP
3400
ABCP18375
34918
5
List Price
$15.59
18.95
66.79
87.99
41.04
50.45
88.89
87.99
Tyrolit BASIC Cold Pressed Walk Behind Wheels for Asphalt & Green Concrete- Type 1
· Designed for cutting asphalt and green concrete on all low HP
walk-behind saws <18HP
«
· All wheels have drive pin hole
SIZE
14” 3/16” x 1”
Specification
CP
Max RPM
4400
96
Material #
30015064
Cat #
69239
Unit Pkg. Qty.
10
List Price
$15.59
TYROLIT ABRASIVES HIGH SPEED CUT-OFF WHEELS
Tyrolit BASIC Heavy Duty High Speed Gas & Portable Saw Wheels for Steel - Type 1
· Designed for all ferrous metals including structural steel, angle iron
and rebar
· A free cutting wheel with exceptional cut rate and very good life
«
· Triple-reinforced for stability and safety
SIZE
12” x 1/8” x 1”
12” x 1/8” x 20mm
14” x 1/8” x 1”
14” x 1/8” x 20mm
16” x 5/32” x 1”
16” x 5/32” x 20mm
Specification
A30BF/100
A30BF/100
A30BF/100
A30BF/100
A30BF/100
A30BF/100
Max RPM
6400
6400
5500
5500
4700
4700
Material #
20006695
20008022
20006696
20008101
20016029
20016030
Cat #
59229
59005
59196
59226
76156
88483
Unit Pkg. Qty.
10
10
10
10
10
10
List Price
$8.15
8.15
11.98
11.98
21.77
21.77
Type 1
High Speed
Gas & Portable
Saws
Tyrolit BASIC Heavy Duty High Speed Gas & Portable Saw Wheels
for Ductile/Cast & Asphalt - Type 1
· Aluminum oxide / silicon carbide grain blend
· Exceptional cut rate and life
«
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
12” x 1/8” x 1”
AC30BF/100
6400
20008028
59629
10
$8.15
12” x 1/8” x 20mm
AC30BF/100
6400
20008029
58731
10
8.15
14” x 1/8” x 1”
AC30BF/100
5500
20008030
59630
10
11.98
14” x 1/8” x 20mm
AC30BF/100
5500
20008253
59495
10
11.98
16” x 1/8” x 1”
AC30BF/100
4700
20010592
69232
10
21.77
16” x 1/8” x 20mm
AC30BF/100
4700
20010593
69233
10
21.77
Tyrolit BASIC Heavy Duty High Speed Gas & Portable Saw Wheels
for Masonry & Concrete - Type 1
· Designed for cutting concrete, masonry, stone, brick and PVC pipe
· Exceptional cut rate and very long life
«
SIZE
12” x 1/8” x 1”
12” x 1/8” x 20mm
14” x 1/8” x 1”
14” x 1/8” x 20mm
16” x 1/8” x 1”
16” x 1/8” x 20mm
Specification
C30BF/100
C30BF/100
C30BF/100
C30BF/100
C30BF/100
C30BF/100
Max RPM
6400
6400
5500
5500
4700
4700
Material #
20008018
20008224
20008027
20008023
20010596
20010597
97
59251
10
58732
10
58849
10
59572
10
69236
10
69237
10
List Price
$8.15
8.15
11.98
11.98
21.77
21.77
Tyrolit Abrasives
· Designed for cutting ductile pipe, asphalt and cast iron
TYROLIT ABRASIVES HIGH SPEED CUT-OFF WHEELS
Tyrolit PREMIUM High Speed Gas & Electric Saw Wheels for Steel - Type 1
· Premium aluminum oxide grain
· When increased productivity is required in cutting all ferrous metals,
structural steels, rebar and metal decking.
· Good for rail cutting applications
· Superior cut rate and wheel life
Type 1
High Speed
Gas & Portable
Saws
«««
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
12” x 1/8” x 1”
A30P/100
5100
20010511
64192
10
$10.70
12” x 1/8” x 20mm
A30P/100
5100
20010520
64193
10
10.70
14” x 1/8” x 1”
A30P/100
4400
20010509
64194
10
14.30
14” x 1/8” x 20mm
A30P/100
4400
20010510
64195
10
14.30
Tyrolit PREMIUM High Speed Gas & Electric Saw Wheels
for Ductile/Cast Iron & Asphalt - Type 1
Tyrolit Abrasives
· Premium aluminum oxide/silicon carbide grain
· When increased productivity is required in cutting ductile pipe, cast
iron and asphalt
«««
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
12” x 1/8” x 1”
AC24/100
5100
20010513
64196
10
$10.70
12” x 1/8” x 20mm
AC24/100
5100
20010514
64197
10
10.70
14” x 1/8” x 1”
AC24/100
4400
20010515
64198
10
14.30
14” x 1/8” x 20mm
AC24/100
4400
20010516
64199
10
14.30
Tyrolit PREMIUM HIgh Speed Gas & Portable Saw Wheels
for Masonry & Concrete - Type 1
· Premium silicon carbide grain
· When increased productivity is required in cutting concrete, masonry,
stone and PVC pipe
«««
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
12” x 1/8” x 1”
1C24/100
5100
20010517
64200
10
$10.70
12” x 1/8” x 20mm
1C24/100
5100
20010518
64202
10
10.70
14” x 1/8” x 1”
1C24/100
4400
20010519
64203
10
14.30
14” x 1/8” x 20mm
1C24/100
4400
20010521
64204
10
14.30
98
TYROLIT ABRASIVES FLAP DISCS
Tyrolit BASIC 2-in-1 Zirconia Flap Discs for Steel and Stainless Steel - Type 29
· General purpose, economically priced flap disc
· Zirconium grain
· Suitable for grinding, deburring, trimming, bevelling, cleaning and
surface conditioning
· Good for all metals
· Contaminant-free/ iron, sulfur and chlorine <0.1%
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
4” x 5/8”
ZA40-B
15270
474872
35612
10
$4.43
4” x 5/8”
ZA60-B
15270
474874
47895
10
4.43
4” x 5/8”
ZA80-B
15270
474875
47966
10
4.43
4-1/2” x 7/8”
ZA40-B
13280
273884
48032
10
4.56
4-1/2” x 7/8”
ZA60-B
13280
273810
48199
10
4.56
4-1/2” x 7/8”
ZA80-B
13280
273871
48221
10
4.56
5” x 7/8”
ZA40-B
13280
273872
48236
10
5.19
5” x 7/8”
ZA60-B
13280
273873
48257
10
5.19
5” x 7/8”
ZA80-B
13280
273874
48271
10
5.19
«
Type 29
Tyrolit PREMIUM Zirconia Flap Discs for Steel and Stainless Steel - Type 27
· Premium zirconium grain
· Suitable for grinding work, deburring, trimming, beveling, cleaning and
· Extremely long life compared to aluminum oxide discs
· Aggressive and fast cutting
· Suitable for grinding steel, stainless steel and cast materials
«««
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
4-1/2” x 7/8”
ZA40-B
13280
668686
60248
10
$7.59
4-1/2” x 7/8”
ZA60-B
13280
668687
60533
10
7.59
4-1/2” x 7/8”
ZA80-B
13280
668691
60534
10
7.59
4-1/2” x 7/8”
ZA40-B (plastic back)
13280
458028
15293
10
8.27
4-1/2” x 7/8”
13280
458029
15294
10
8.27
4-1/2” x 7/8”
13280
458030
47570
10
8.27
15.60
7” x 7/8”
ZA40-B
8600
668696
60740
10
7” x 7/8”
ZA60-B
8600
668697
60638
10
15.60
7” x 7/8”
ZA80-B
8600
668698
61993
10
15.60
99
Type 27
30o
Right Angle
Grinder
Tyrolit Abrasives
15o
Right Angle
Grinder
TYROLIT ABRASIVES FLAP DISCS
Tyrolit PREMIUM Zirconia Flap Discs for Steel and Stainless Steel - Type 29
Tyrolit Abrasives
· Premium zirconium grain
· Suitable for grinding work, deburring, trimming, beveling, cleaning and
· Extremely long life compared to aluminum oxide discs
· Aggressive and fast cutting
· Suitable for grinding steel, stainless steel and cast materials
«««
Type 29
15o
Right Angle
Grinder
SIZE
Specification
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
4-1/2” x 7/8”
ZA40-B
13280
668642
59653
10
$7.59
4-1/2” x 7/8”
ZA60-B
13280
668644
58956
10
7.59
4-1/2” x 7/8”
ZA80-B
13280
668649
59270
10
7.59
4-1/2” x 7/8”
ZA120-B
13280
643803
32442
10
8.88
10.06
4-1/2” x 5/8”-11
ZA40-B
13280
30014923
65058
10
4-1/2” x 5/8”-11
ZA60-B
13280
30014924
65059
10
10.06
4-1/2” x 5/8”-11
ZA80-B
13280
30014925
65060
10
10.06
4-1/2” x 5/8”-11
ZA120-B
13280
30014926
65061
10
10.06
5” x 7/8”
ZA40-B
12220
668663
66137
10
9.52
5” x 7/8”
ZA60-B
12220
668664
63387
10
9.52
5” x 7/8”
ZA80-B
12220
668665
59271
10
9.52
6” x 7/8”
ZA40-B
10200
519212
48283
10
11.98
6” x 7/8”
ZA60-B
10200
519213
48287
10
11.98
6” x 7/8”
ZA80-B
10200
519214
48292
10
11.98
11.98
6” x 7/8”
ZA120-B
10200
519215
48299
10
7” x 7/8”
ZA40-B
8600
668670
60420
10
15.60
7” x 7/8”
ZA60-B
8600
668672
59486
10
15.60
7” x 7/8”
ZA80-B
8600
668673
59272
10
15.60
7” x 5/8”-11
ZA40-B
8600
30014927
65062
10
17.83
17.83
7” x 5/8”-11
ZA60-B
8600
30014928
65063
10
7” x 5/8”-11
ZA80-B
8600
30014929
65064
10
17.83
7” x 5/8”-11
ZA120-B
8600
30014930
65065
10
17.83
100
TYROLIT ABRASIVES RESIN FIBER DISCS
Tyrolit Premium Resin Fiber Discs - Aluminum Oxide for Steel
· General purpose aluminum oxide disc for light to medium sanding
and finishing applications
· Suitable for ferrous and/or non-ferrous metals
Specification
A24
A36
A50
A60
A80
A100
A120
A24
A36
A50
A60
A80
A100
A120
A16
A24
A36
A50
A60
A80
A100
A120
Max RPM
13000
13000
13000
13000
13000
13000
13000
11900
11900
11900
11900
11900
11900
11900
8500
8500
8500
8500
8500
8500
8500
8500
Material #
30010278
30010279
30010281
30010282
30010284
30010285
30010286
30010290
30010291
30010292
30010293
30010294
30010295
30010296
30012098
30010300
30010301
30010302
30010303
30010304
30010305
30010306
Cat #
60773
58874
60774
60090
59921
60775
60776
62325
61098
60828
64606
62326
66354
66355
62834
60839
59361
60428
66356
59362
62835
66357
Unit Pkg. Qty.
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
List Price
$1.39
1.28
1.21
1.16
1.12
1.12
1.12
1.52
1.47
1.43
1.34
1.24
1.24
1.24
2.62
2.27
2.22
2.18
2.02
1.89
1.89
1.89
Right Angle
Grinder
Tyrolit Abrasives
SIZE
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
5” x 7/8”
5” x 7/8”
5” x 7/8”
5” x 7/8”
5” x 7/8”
5” x 7/8”
5” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
Tyrolit Premium Resin Fiber Discs - Zirconia for Metal & Cast Materials
· Heavy duty zirconia grain disc for tough sanding and finishing
applications
· Suitable for ferrous and/or non-ferrous metals
SIZE
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
4-1/2” x 7/8”
5” x 7/8”
5” x 7/8”
5” x 7/8”
5” x 7/8”
5” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
7” x 7/8”
SIZE
4-1/2”
5”
7”
Specification
ZA24
ZA36
ZA50
ZA60
ZA80
ZA24
ZA36
ZA50
ZA60
ZA80
ZA16
ZA24
ZA36
ZA50
ZA60
ZA80
Material #
44878
44879
44880
Max RPM
13000
13000
13000
13000
13000
11900
11900
11900
11900
11900
8500
8500
8500
8500
8500
8500
Material #
30010310
30010311
30010312
30010313
30010315
30010316
30010318
30010319
30010320
30010321
30010322
30010323
30010324
30010325
30010327
30010328
Backing Pads
Cat #
Unit Pkg. Qty.
64970
1
68811
1
64548
1
Cat #
66358
60271
66359
60223
59922
66360
65034
60827
65033
66361
63241
60424
58779
59624
60346
66362
Unit Pkg. Qty.
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
List Price
$11.00
13.55
18.73
101
List Price
$2.12
1.96
1.84
1.72
1.61
2.22
2.12
1.96
1.89
1.79
3.69
3.25
3.18
3.07
2.85
2.66
Nut for Backing Pad
Cat # 60272
$1.90
Right Angle
Grinder
TYROLIT ABRASIVES WIRE BRUSHES
Spindle Mounted Wire Brushes for Steel
·For use on portable tools and die grinders
·1/4” diameter shank
·Designed for use in cleaning and finishing recessed areas and pipes
for aggressive cutting and deburring
Straight
Grinder
Diameter
3/4”
1-1/8”
Diameter
3/4”
1”
Diameter
2”
3”
Knot Type Steel Wire
Wire Size Trim Length Overall Length Max RPM Material #
.020
1.20
2.80
20000
52685
.020
1.20
2.80
20000
52680
Crimped Steel Wire
.020
.86
2.60
20000
52679
.020
1.0
2.70
20000
890722
Circular Flared Steel WIre
.012
.50
0.50
20000
890845
.012
.60
0.75
20000
890848
63573
25
63574
25
List Price
$18.19
21.42
63575
25
63576
25
List Price
$5.47
6.43
64424
25
63577
25
List Price
$7.36
8.66
Tyrolit Abrasives
Crimped Wire Cup Brushes for Steel
·For use on right angle grinders
·5/8”-11 threaded arbor
·Designed for heavy cutting, deburring, weld prep and rust removal
·Fast, aggressive cutting action
·Crimped wire for greater flexibility and light cleaning and material removal,
especially for irregular surfaces. Available in carbon or stainless steel wire
Right Angle
Grinders
Diameter
2-3/4”
4”
5”
6”
Wire Size
.012
.014
.020
.020
Diameter
5”
Wire Size
.020
Crimped Wire Brushes for Steel
Arbor
Max RPM Material #
Cat #
5/8-11
12000
52666
60071
5/8-11
9000
896251
80418
5/8-11
6500
896253
77633
5/8-11
6000
896254
76578
Crimped Wire Brushes for INOX/Stainless
Arbor
Max RPM Material #
Cat #
5/8-11
9000
52668
61101
Unit Pkg. Qty.
1
1
1
1
List Price
$9.94
31.06
34.92
41.59
Unit Pkg. Qty.
1
List Price
$63.71
Knot Wire Cup Brushes for Steel or Stainless Steel
·
·
·
·
·
Right Angle
Grinders
For use on right angle grinders
5/8”-11 threaded arbor
Designed for heavy cutting, deburring, weld prep and rust removal
Fast, aggressive cutting action
Weld or large area cleaning
Knot Wire Cup Brushes for Steel
Arbor
Max RP
Material #
5/8-11
12000
52672
5/8-11
9000
52673
5/8-11
6500
52675
5/8-11
6000
52678
Knot Wire Cup Brushes for INOX/Stainless
Diameter
Wire Size
Arbor
Max RPM Material #
2-3/4”
.020
5/8-11
12000
52676
4”
.020
5/8-11
9000
52677
Wire Cup Adapters
Adapter Size
Adapts To
Material #
Cat #
M10 x 1.25 to 5/8”-11
Makita
20011963
69535
M10 x 1.50 to 5/8”-11 B&D, Hitachi, Skil 20011964
73998
3/8-24 to 5/8”-11
Air Tools
20011965
68002
Diameter
2-3/4”
4”
5”
6”
Wire Size
.020
.020
.020
.020
102
Cat #
60072
61851
58778
79856
Unit Pkg. Qty.
1
1
1
1
List Price
$15.04
31.14
49.46
51.97
Cat #
60463
64591
Unit Pkg. Qty.
1
1
List Price
$24.75
62.71
Unit Pkg. Qty.
1
1
1
List Price
$8.63
8.63
8.63
TYROLIT ABRASIVES WIRE WHEELS
Tyrolit Premium Wire Brushes for Joint Crack Cleaning for Concrete - Type 1
· For use on small, low horsepower walk behind saws
· Designed for cleaning concrete expansion joints
Low HP
Walk Behind
Saws
· Maximum RPM - 5,000
Diameter
Wire Size
Arbor
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
12” x .625 with drive pin
.035
1”
5000
896247
76619
2
$113.01
Tyrolit Premium Wire Wheels for Bench Grinders for Steel
· For use on bench grinders
· Crimped wire for flexibility
· Designed for general cleaning, surface preparation and scale removal
· Standard 1-1/4” arbor with bushing set included
6”
6”
8”
10”
.012
.012
.012
.012
Arbor Face Width Trim Length Max RPM Material #
5/8”
2”
2”
3/4”
.70
1.0
1.0
1.50
1.20
1.30
1.90
2.00
6000
6000
4500
3600
896115
52966
894770
896246
Tyrolit Abrasives
Diameter Wire Size
Bench
Grinders
Cat # Unit Pkg. Qty. List Price
59096
62841
61820
70986
19.78
19.82
24.80
62.71
1
1
1
1
Tyrolit Premium Twist Knot Wire Wheels for Steel or Stainless Steel
· For use on small side grinders
· Regular Twist Knot - provides low flexibility and aggressive cutting
and cleaning
· Stringer Bead Twist Knot - provides more aggressive cleaning and
cutting for the most demanding applications. Designed for welds, flux
removal and applications where a narrow face is required
Regular Twist Knot Wire Wheels For Steel
Diameter
4”
6”
Wire Size
.014
.020
4”
5”
6-1/2”
.020
.020
.020
6”
.020
4”
5”
.020
.020
Arbor
5/8”-11
5/8”-11
Max RPm
12000
9000
Material #
52693
52697
Cat #
62674
59670
Unit Pkg. Qty.
1
1
Stringer Bead Knot Wire Wheels For Steel
5/8”-11
12000
52694
61506
5/8”-11
9000
52695
59204
5/8”-11
9000
52699
61099
Regular Twist Knot Wire Wheels For INOX/Stainless
5/8”-11
9000
52702
68618
Stringer Bead Knot Wire Wheels For INOX/Stainless
5/8”-11
12000
52700
62321
5/8”-11
9000
52701
79009
103
List Price
$18.85
39.59
1
1
1
24.97
42.99
43.39
1
61.12
1
1
37.37
64.45
Side
Grinders
TYROLIT ABRASIVES CUP WHEELS, BLOCKS, STONES & GRINDING DISCS
Flaring Cup Wheels for Steel & Masonry
· For use on right angle grinders
· Coarse 16 or 24 grit wheel for demanding grinding applications
Right Angle
Grinders
· Heavy stock removal on all ferrous metals
SIZE
4” x 2” x 5/8”-11
5” x 2” x 5/8”-11
6” x 2” x 5/8”-11
6” x 2” x 5/8”-11
SIZE
4” x 2” x 5/8”-11
5” x 2” x 5/8”-11
6” x 2” x 5/8”-11
XPERT Flaring Cup Wheels for Metal - Type 11
Specification
Max RPM Material #
Unit Pkg. Qty.
Cat #
A24PB (24 grit)
9050
2010525
65500
1
A24PB (24 grit)
7260
20006831
59295
1
A16PB (16 grit)
6050
20006824
59010
1
A24PB (24 grit)
6050
20006829
59296
1
XPERT Flaring Cup Wheels for Masonry & Concrete - Type 11
Specification
Max RPM Material #
Unit Pkg. Qty.
Cat #
C16PB (16 grit)
9050
2010526
65501
1
C16PB (16 grit)
7250
2010524
65499
1
C16PB (16 grit)
6050
20006823
59147
1
List Price
$19.00
23.82
27.62
27.62
List Price
$20.81
27.31
31.56
Tyrolit Abrasives
Rubbing Blocks & Grinding Stones for Concrete/Masonry
· Rubbing Blocks - long life and good performance for removing mold
and form marks, cleaning castings and smoothing concrete surfaces - comes with or without handle
· Grinding Stones - for removal and/or grinding concrete imperfections, uneven
joints or smoothing exposed aggregate. Available in Coarse (fast removal),
Medium (finish grinding) or Fine (smoothing surfaces)
Hand Tool
SIZE/DESCRIPTION
6” x 3” x 1” with handle
8” x 3-1/2” x 1-1/2” with handle
6” x 2” x 2” fluted without handle
8” x 2” x 2” fluted without handle
SIZE
2” x 2” x 4”
2’ x 2” x 8”
2” x 2” x 4”
2” x 2” x 8”
2” x 2” x 4”
2” x 2” x 8”
Grit
Coarse
Coarse
Medium
Medium
Fine
Fine
Rubbing Blocks
Material #
ABRBH-HR252
ABRBH-HR250
ABRBF-HR241
ABRBF-HR242
Grinding Stones
Material #
ABCH-10
ABCH-10-8
ABCH-24
ABCH-24-8
ABCH-80
ABCH-80-8
Cat #
35064
35065
35061
35062
Unit Pkg. Qty.
6
6
6
6
List Price
$32.53
39.92
16.68
21.62
Cat #
35067
68014
35063
68015
35066
68016
Unit Pkg. Qty.
6
6
6
6
6
6
List Price
$11.14
20.60
11.14
20.60
11.14
20.60
Zec© and Semi-Flexible Grinding Discs for Concrete/Masonry
Side
Grinders
Nut for Zec© Disc
Cat # 60210
$15.80
· Zec© Disc - 16 grit silicon carbide, minimal loading, ideal for grinding
concrete, masonry and stone along with adhesives from concrete.
No backup pad needed.
· Semi-Flex Disc - 16, 24 and 36 grit silicon carbide - a lower cost
alternative to plastic-backed Zec wheels. Must be used with
backup pads (page 16)
ZEC© Grinding Disc - No Backup Pad Required
SIZE
Grit
Max RPM
Material #
Cat #
Unit Pkg. Qty.
List Price
4-1/2” x 7/8”
16-Grit Silicon
13280
SCGD4500
58155
5
$13.15
7” x 7/8”
16-Grit Silicon
8600
SCGD7000
58154
5
15.29
General Purpose Grinding Disc - Must Be Used with Backup Pad - See Page 16 for Backup Pads
4-1/2” x 7/8”
16-Grit Silicon
13280
20016050
21271
5
$8.90
4-1/2” x 7/8”
24-Grit Silicon
13280
20016051
21273
5
8.90
4-1/2” x 7/8”
36-Grit Silicon
13280
20016052
21274
5
8.90
7” x 7/8”
16-Grit Silicon
8600
20016053
21282
5
12.19
7” x 7/8”
24-Grit Silicon
8600
20016054
21275
5
12.19
7” x 7/8”
36-Grit Silicon
8600
20016055
21276
5
12.19
104
TYROLIT ABRASIVE LABEL MARKINGS
QUALITY GRADES:
«
BASIC
«««
PREMIUM
Brand Name
Application
Maximum
Speed
Wheel Shape
Grade
Specification
Safety Icons
Wheel Size
EAN-Bar Code
Material Descriptions
Multi-Lingual
Material Icon
Tyrolit Abrasives
Part Number
Part # ABRFABPACK
Cat # 32580
List Price $21.83
With FREE Logo
Dew Rag!
Includes:
4-1/2” x 1/4” x 7/8”
BASIC raised hub for metal
# 20006653
Cat # 58717
(Type 27)
4-1/2” x 1/4” x 7/8”
Premium 2in1 raised hub disc
# 5293
Cat # 59268
(Type 27)
4-1/2” x .040 x 7/8”
Premium 2in1 UltraThin
cutting disc
# 913181
Cat # 58815
(Type 1)
105
4-1/2” x .045 x 7/8”
Premium 2in1 thin cut off
wheel for INOX
# 472863
Cat # 14266
(Type 27)
4-1/2” x 7/8”
Premium Zirconia flap disc
for metal/INOX
# 668644
Cat # 58956
(Type 29)
NOTES
SAW ICONS AND INFORMATION
On most saw and equipment pages you will find the elements shown below.
This describes the icon meanings and where to find specific information.
Saw Model Number/
Description
CC7074 InLine Saw
Available Power Options
36”
Saw Blade Capacity
Page Color Codes
ORANGE
BLACK
SAWING
DRILLING
EQUIPMENT EQUIPMENT
EQUIPMENT POWER ICONS
EQUIPMENT LEXICON & INFORMATION
Applies to Saws and Equipment
Abbreviations:
F.P.M. - Feet Per Minute. Measurement of travel of a
Helpful Tips:
self propelled machine.
G.P.H. - Gallons Per Hour. Normally used when
measuring water consumption of a machine.
Sawing Equipment
G.P.M. - Gallons Per Minute. A measurement of the
amount of hydraulic fluid that is pumped into a motor.
HP or H.P. - Horsepower rating of a motor or engine.
PH - Electric phase of a motor.
P.S.I. - Pounds per square inch that refers to air
pressure needed on pneumatic motors and equipment.
R.P.M. - Rotations Per Minute. The measurement of
the number of rotations something is spinning. Typically refers to a blade, motor or core bit and very important when cutting and coring. Spinning a blade or bit at
the wrong R.P.M. can result in lower blade life or bit life
and even injury to the operator.
V - Voltage of an electric motor (example: 230V) and is
the power supply needed to run the machine.
• Be sure to always apply grease to the grease points
on your saw after every full day of use.
• Always check your drive belts for the proper tension
and make sure they are clean and free of slurry.
• Inspect your blade flange (or collar) on your saw
before mounting a blade to be sure there is no
damage or burrs in the metal or drive pin.
• Use proper fuel (or fuel mix) depending on engine
type.
• Be sure the front pointer is straight and not damaged
so you can follow your cut line properly.
Saw slowing down in the cut?
• Check RPM settings compared to blade.
• Saw may need tuned up.
• Belts may need adjusted.
• Blade bond specification may be too hard for the
material being cut - go to a softer bond.
Other Commonly Used Terms:
Collar - Otherwise known as a flange. This is the metal piece on a saw that holds the blade in place around
the arbor.
Drive Pin - A metal pin that goes through a blade’s drive pin hole and into the blade flange, keeping the blade from
spinning around the bladeshaft.
108
DIAMOND BLADE CUTTING SPEEDS & SAFETY
Things to Consider About Operating Speeds & Safety
Horsepower: High horsepower may require harder bonds and higher
diamond concentration. Lower horsepower may require softer bonds and
lower diamond concentration.
Material Hardness/Abrasive: Harder, less abrasive materials require
slower shaft speed. Softer, more abrasive materials require faster shaft
speed.
Shaft Speed: Increasing blade shaft speed makes the diamond blade cut
harder. Decreasing shaft speed makes the blade wear faster.
WARNING: Operating saw blades at rotational speeds greater than
the maximum RPM can cause blade damage and possibly personal
injury.
Walk Behind Wet Blades
Maximum Recommended
Blade
Cutting Operating Speed
Diameter
Depth
RPM
12”
14”
3-3/4”
4-3/4”
2900
2900
Dry Blades
Maximum
Safe Speed
RPM
Blade
Diameter
4500
4”
1”
9075
15000
4-1/2”
1-1/4”
8065
13300
5”
1-1/2”
7250
12000
7”
2-1/2”
5175
8725
8”
2-5/8”
4500
7650
10”
2-3/4”
3600
7500
12”
3-3/4”
3400
6300
14”
4-3/4”
3200
5400
3900
16”
5-3/4”
2600
3400
18”
6-3/4”
2600
3000
20”
7-3/4”
2450
2700
24”
9-3/4”
1950
2250
26”
10-3/4”
1950
2100
30”
11-3/4”
1650
1800
36”
14-3/4”
1400
1500
42”
17”
1050
1300
48”
20”
850
1100
54”
22-1/2”
775
1000
60”
25-1/2”
625
72”
31-1/2”
575
Masonry Blades
Maximum
Cutting
Depth
Recommended
Operating Speed
RPM
Maximum
Safe Speed
RPM
750
14”
5”
2550
3900
18”
7”
2300
3000
20”
8”
2300
2900
24”
10”
2300
2800
Maximum Recommended Maximum
Cutting Operating Speed Safe Speed
Depth
RPM
RPM
18”
6-1/4”
1500
3000
20”
7-1/4”
1500
2700
24”
9-1/4”
1450
2250
30”
12-1/4”
1400
1800
36”
15-1/4”
1300
1500
Blade
Diameter
42”
18-1/4”
950
1300
6”
1-3/4”
6050
10175
48”
21-1/4”
850
1100
7”
2-1/4”
5175
8725
54”
24-1/4”
700
1000
8”
2-3/4”
4500
7650
60”
27-1/4”
625
900
9”
3-1/4”
4025
6800
72”
33-1/4”
575
750
10”
3-3/4”
3625
6125
Tile Blades
109
Maximum Recommended Maximum
Depth
RPM
RPM
Sawing Equipment
900
Blade
Diameter
Wall Saw Blades
Blade
Diameter
Maximum Recommended
Maximum
Depth
RPM
RPM
ELECTRIC WALK BEHIND SAWS
MOST
CHOICES
WE OFFER THE MOST CHOICES OF ELECTRIC POWERED
SAWS & EQUIPMENT
CC1507E
Basement Saw
CC1305E3-XL
CC1000 JOINT CUTTING SAW
Model #
Motor Type
Part #
Cat #
CC1025E
CC1025E
2.5 HP electric Baldor 1PH - 110V/230V
2.5 HP electric Baldor 1PH - 110V/230V - 5/8” Shaft
5800552
5800716
47104
63217
Blade
Capacity
8”
8”
Uncrated/
Crated Wt. (lbs.)
90/110
90/110
List Price
$2,644
2,620
CC1300-XL WALK BEHIND SAWS
Model #
Motor Type
CC1305E1-XL
CC1305E3-XL
CC1305E3-XL
5 HP Baldor Electric 1 PH 230V
Uncrated/
18” Capacity 18” Capacity
Crated Weight List Price
Part #
Cat #
(lbs.)
5800580
75071
340/355
$3,611
5800581A
93652
350/367
3,775
5800581B
97080
355/372
3,775
List Price
Part #
Cat #
5800577
5800578A
5800578B
$3,573
3,730
3,730
75068
99977
26493
CC1310E3XL-20 WALK BEHIND SAWS
20” Capacity
Part #
CC1310E3XL-20
5800589A
CC1310E3XL-20
5800589B
CC1310E3XL-20 10 HP Baldor Electric Dual Voltage 230V & 460V
5800985
Model #
Motor Type
20” Capacity
Cat #
93810
93220
57763
CC1500 BASEMENT SAW
Model #
Motor Type
Part #
Cat #
CC1507E3-20
7.5 HP, 3 PH 460V
5801500
19131
Blade
Capacity
20”
Uncrated/
Crated Weight (lbs.)
265/280
265/280
385/415
Uncrated/Crated
Weight (lbs.)
185/205
List Price
$5,230
5,230
6,094
List Price
$6,936
Sawing Equipment
CC1800XL PUSH SAWS
Model #
Motor Type
CC1875E1XL-P
CC1810E3XL-P
CC1810E3XL-P
CC1810E3XL-P
7.5 HP Baldor Electric, 1PH- 230V
10 HP Baldor Electric, 3PH- 230V
CC1875E1XL-S
CC1810E3XL-S
CC1810E3XL-S
CC1810E3XL-S
Uncrated/
Part #
Cat #
Part #
Cat #
Crated Weight List Price
List Price
w/20” Guard w/20” Guard
w/14” Guard w/14” Guard
(lbs.)
5800628
54480
5800629
54490
330/370
$5,194
$5,293
5800692A
54485
5800693A
54497
330/370
5,183
5,280
5800692B
54565
5800693B
54580
330/370
5,183
5,280
5800692C
54568
5800693C
54581
330/370
5,183
5,280
CC1800XL SELF-PROPELLED SAWS
5800736
5800738A
5800738B
5800738C
54507
54508
54596
54597
$6,275
6,263
6,263
6,263
CC2500 WALK BEHIND SAWS
Model #
Motor Type
Part #
Cat #
CC2515E-14
CC2515E-14
CC2515E-14
CC2515E-20
CC2515E-20
CC2515E-20
CC2515E-26
CC2515E-26
CC2515E-26
15 HP Leeson Electric 230V
15 HP Baldor Electric 575V
5800400A
5800400B
5800400C
5800401A
5800401B
5800401C
5800402A
5800402B
5800402C
48413
99980
27948
98001
93694
27951
94379
94409
45795
110
5800737
5800739A
5800739B
5800739C
Blade
Capacity
14”
14”
14”
20”
20”
20”
26”
26”
26”
54539
54540
54600
54601
380/420
380/420
380/420
380/420
Uncrated/Crated
Weight (lbs.)
700/770
700770
700/770
710780
710/780
710/780
720/790
720/790
720/790
$6,375
6,360
6,360
6,360
List Price
$ 8,745
8,745
8,745
8,823
8,823
8,823
9,050
9,050
9,050
ELECTRIC WALK BEHIND SAWS
BEST
SELECTION
CC3730E
CC3740E
MODEL #
Motor Typle
Part #
CAT #
CC3520E-14
CC3520E-14
CC3520E-14
CC3520E-20
CC3520E-20
CC3520E-20
CC3520E-26
CC3520E-26
CC3520E-26
CC3520E-30
CC3520E-30
CC3520E-30
CC3530E-14
CC3530E-20
CC3530E-26
CC3530E-30
30 HP Lincoln Electric (460V)
5800784A
5800784B
5800784C
5800785A
5800785B
5800785C
5800786A
5800786B
5800786C
5800787A
5800787B
5800787C
5800788A
5800789A
5800790A
5800791A
50442
03729
03730
50443
57116
03733
50444
51919
03739
50446
68486
03743
50439
50440
50392
50441
Model #
Engine/Motor Type
Part #
Cat #
CC3725E-14
CC3725E-14
CC3725E-14
CC3725E-20
CC3725E-20
CC3725E-20
CC3725E-26
CC3725E-26
CC3725E-26
CC3725E-30
CC3725E-30
CC3725E-30
CC3725E-36
CC3725E-36
CC3725E-36
CC3730E-14
CC3730E-20
CC3730E-26
CC3730E-30
CC3730E-36
CC3740E-20
CC3740E-26
CC3740E-30
CC3740E-36
5800445A
5800445B
5800445C
5800446A
5800446B
5800446C
5800447A
5800447B
5800447C
5800448A
5800448B
5800448C
5800449A
5800449B
5800449C
5800381A
5800382A
5800383A
5800384A
5800385A
5800436A
5800437A
5800438A
5800439A
14306
03765
03781
07869
07870
07878
03782
97597
03783
32087
03797
03805
07716
03811
03829
14300
97788
99455
15225
60786
50871
97350
99107
10497
Blade
Capacity
14”
14”
14”
20”
20”
20”
26”
26”
26”
30”
30”
30”
14”
20”
26”
30”
Uncrated/Crated
Weight (lbs.)
1,005/1,075
1,005/1,075
1,005/1,075
1,015/1,085
1,015/1,085
1,015/1,085
1,025/1,095
1,025/1,095
1,025/1,095
1,035/1,105
1,035/1,105
1,035/1,105
1,035/1,105
1,045/1,115
1,055/1,125
1,065/1,135
List Price
$14,973
14,973
14,973
15,052
15,052
15,052
15,208
15,208
15,208
15,360
15,360
15,360
15,855
15,931
16,084
16,242
Motor Type
50 HP Baldor Electric (460V)
CC7200 SAWS
Part #
5800286
5800287
5800288
5800289
5800290
5800291A
5800291B
5800398
111
Cat #
48528
48529
48530
48531
48532
04445
03512
26560
Uncrated/Crated
Weight (lbs.)
1,385/1,465
1,385/1,465
1,385/1,465
1,395/1,475
1,395/1,475
1,395/1,475
1,405/1,485
1,405/1,485
1,405/1,485
1,415/1,485
1,415/1,485
1,415/1,485
1,425/1,495
1,425/1,495
1,425/1,495
1,350/1,430
1,360/1,440
1,370/1,450
1,380/1,460
1,390/1,470
1,4351,515
1,445/1,525
1,455/1,535
1,465/1,545
Blade Capacity Uncrated/Crated Weight (lbs.)
26”
1,735/1,885
30”
1,745/1,895
36”
1,755/1,905
42”
1,775/1,925
48”
1,795/1,945
54”
1,810/1,960
54”
1,810/1,960
60”
1,860/2,010
List Price
$15,853
15,853
15,853
16,001
16,001
16,001
16,227
16,227
16,227
16,467
16,467
16,467
16,681
16,681
16,681
16,438
16,584
16,804
17,025
17,241
17,025
17,252
17,480
17,709
List Price
$21,729
21,886
22,118
23,130
23,628
23,936
23,936
25,433
Sawing Equipment
Model #
CC7250E-10-26
CC7250E-10-30
CC7250E-10-36
CC7250E-10-42
CC7250E-10-48
CC7250E-10-54
CC7250E-10-54
CC7250E-10-60
Blade
Capacity
14”
14”
14”
20”
20”
20”
26”
26”
26”
30”
30”
30”
36”
36”
36”
14”
20”
26”
30”
36”
20”
26”
30”
36”
ELECTRIC SAWS, GROOVERS & FLOOR GRINDERS
THE WIDEST RANGE
CG-2 MiniGroover
CC82E1-8 Floor
Grinder
CG-1 & CG-2 MINI-GROOVERS
Model #
Motor Type
Part #
Cat #
CG-1E15
CG-2E30
15 HP Baldor Electric - 3PH
30 HP Lincoln Electric 3PH
5803005
5803007
08009
08985
Grinding Head
Capacity (Width)
10”
16”
SINGLE HEAD FLOOR GRINDERS
Model #
Motor Type
Part #
Cat #
CC82E1-8
CC102E1
CC175E1
CC175E3
CC175E3
CC175E3
2HP - 1PH - *115V or 230V Baldor Electric
2 HP - 1PH - *115V or 230V Baldor Electric w/starter
7.5 HP - 1PH - 230V Baldor Electric w/starter
5800989PKG
5800539
5800529
5800530A
5800530B
5800530C
15072
48551
48552
95042
94981
98244
CC275E1 Floor
Grinder
Uncrated/Crated
Weight (lbs)
780/840
1,525/1,605
List Price
$19,803
27,005
Head
Capacity
8”
10”/12”
10”/12”
10”/12”
10”/12”
10”/12”
Uncrated/Crated
Weight (lbs.)
110/130
370/420
370/420
370/420
370/420
370/420
Head
Capacity
(2)10”/(2)12”
(2)10”/(2)12”
(2)10”/(2)12”
(2)10”/(2)12”
Uncrated/Crated
Weight (lbs.)
350/400
400/450
400/450
400/450
List Price
$2,760
3,130
4,745
4,129
4,129
4,129
* Must specify 115V or 230V when ordering
Sawing Equipment
DUAL HEAD FLOOR GRINDERS
Model #
Motor Type
Part #
Cat #
CC202E1
CC275E1
CC275E1
CC275E3
2 HP - 1 PH, *115V or 230V Baldor Electric w/starter
5800533
5800535
5800536A
5800536B
48555
48556
11192
94965
List Price
4,533
6,580
6,041
6,041
RECOMMENDED POWER CORD GAUGE - 3 PHASE
Horsepower Phase Voltage Amps 50ft Cord 100ft Cord 150ft Cord 200ft Cord 300ft Cord
5
5
7.5
10
10
15
15
20
20
25
25
30
40
50
3
3
3
3
3
3
3
3
3
3
3
3
3
3
230
460
230
230
460
230
460
230
460
230
460
460
460
460
12
6
17
24
12
36
18
52
26
58
29
37
48
62
#14
#14
#12
#10
#14
#8
#12
#6
#10
#6
#10
#8
#6
#4
#12
#14
#10
#8
#14
#6
#12
#6
#10
#4
#10
#8
#6
#4
#10
#14
#8
#6
#12
#6
#12
#4
#8
#4
#8
#8
#6
#4
112
#8
#14
#6
#6
#12
#4
#10
#2
#8
#2
#8
#6
#6
#4
#6
#12
#6
#4
#10
#2
#8
N/A
#6
N/A
#6
#4
#4
#2
Minimum Recommended
Generator Sizes
Saw
H.P. Phase KW
Soft
Start
CC850
CC850
5
5
1
3
15
12
--
CC875
CC875
7.5
7.5
1
3
20
20
--
CC1300XL
CC1300XL
5
5
1
3
15
12
--
CC1800XL
CC1800XL
7.5
10
1
3
20
25
--
CC2500
15
3
30
--
ELECTRIC MASONRY & BLOCK SAWS
OF ELECTRIC EQUIPMENT
CC300M
CC350M
CC500MXL2-E1
CC300M MASONRY SAW
Model #
Motor Type
Part #
Cat #
CC300M-E2
2 HP - 115 Volt 15 amp Electric
5800730
84807
CC350M PAVER SAW
Model #
Motor Type
Part #
Cat #
CC350M-E1
CC350M-E2
1.5HP - 15 Amp - 115V/60Hz Electric
1.5HP - 7.5 Amp - 230V/60Hz Electric
5800731
5800732
98685
98686
CC500XL-2 MASONRY SAWS
Model #
Motor Type
Part #
Cat #
CC515MXL2-E1
CC520MXL2-E1
CC525MXL2-E1
CC530MXL2-E1
1.5 HP Baldor - 1PH-115/230V Electric
3.0 Baldor-1PH 230V - 50 Hz Electric
5800799
5800814
5800801
5800802
03725
08667
03726
03728
CC800M BLOCK SAWS
Motor Type
Part #
Cat #
CC850M-E1-20
CC850M-E3-20
CC850M-E3-20
CC875M-E1-20
CC875M-E3-20
CC875M-E3-20
CC875M-E3-20
CC875M-E1-24
CC875M-E3-24
CC875M-E3-24
CC875M-E3-24
5 HP - 1PH Baldor Electric 230V w/water pump
5 HP - 3PH Baldor Electric 230V w/water pump
5 HP -3PH Baldor Electric 460V w/water pump
7.5 HP - 1PH Baldor Electric 230V w/water pump
5800540
5800541A
5800541B
5800542
5800544A
5800544B
5800549
5800543
5800545A
5800545B
5800550
46820
96416
18533
47664
96015
96336
48549
47630
97240
97000
48550
Minimum Recommended Generator Sizes
Phase KW
Soft
Start
Saw
H.P.
CC3500
CC3500
20
30
3
3
40
60
25kw
40kw
CC3700
CC3700
CC3700
CC6500
CC7200
25
30
40
40
50
3
3
3
3
3
50
60
80
80
100
30kw
40kw
60kw
60kw
80kw
Blade
Capacity
14”
Uncrated/CratedWeight
List Price
(lbs.)
80/87
$933
Blade
Capacity
14”
14”
Uncrated/Crated
Weight (lbs.)
178/190
178/190
Blade
Capacity
14”
14”
14”
14”
Uncrated/Crated
WEIGHT (lbs.)
219/244
195/220
221/276
230/255
Blade
Capacity
20”
20”
20”
20”
20”
20”
20”
24”
24”
24”
24”
Uncrated/Crated
WEIGHT (lbs.)
530/600
550/620
550/620
560/630
550/620
550/620
550/620
560/630
550/620
550/620
570/640
List Price
$1,117
1,117
List Price
$2,092
2,137
2,267
2,360
List Price
$4,389
4,364
4,364
4,603
4,574
4,574
4,566
4,736
4,706
4,706
4,701
RECOMMENDED POWER CORD GAUGE - 1 PHASE
Horsepower Phase Voltage Amps 50ft Cord 100ft Cord 150ft Cord 200ft Cord 300ft Cord
1.5
1
115
13
#12
#10
#8
--1.5
1
230
6
#14
#14
#12
--2
1
115
16
#10
#8
#6
--2
1
230
8
#14
#14
#12
--2.5
1
115
21
#10
#8
#6
--2.5
1
230
11
#14
#12
#10
--5
1
230
23
#10
#8
#6
#6
#4
7.5
1
230
33
#8
#8
#6
#4
#2
CAUTION: Use of a wire gauge that is too small will cause loss
of power or overheating and will damage the electric motor.
113
Sawing Equipment
Model #
CC800M
PUSH
The ultra lightweight saw
that cuts decorative
and joint cuts in concrete
8”
Dust diverter keeps
the cut line clean
Horsepower as
rated by the engine
manufacturer
CC1000 Specifications:
• Maximum Depth of Cut:
• Blade Shaft RPM:
• Blade Shaft Diameter:
• Arbor Size:
• Front Wheels:
• Rear Wheels:
Features/Benefits:
• Center cut design making it easier to keep the cut straight
• Power transference to blade drive via 2
molded notch 3VX premium belts for
better cutting performance and long belt life
• Cyclone air cleaner for increased engine longevity
• 1/8” steel frame
• Upcut design for a cleaner cut
• 1” or 5/8” arbor with greaseable bearings
• Adjustable blade alignment
Parts Manual #: 1800565
CC1000 Dimensions:
A. Saw Height:
34-1/2”
B. Minimum Length, Pointer Up: 26-1/2”
C. Maximum Length, Pointer Down: 56”
18”
D. Pointer Extension:
E. Frame Width:
10”
23-1/2”
F. Frame Length:
G. Saw Width:
14-1/2”
H. Front Axle Center Length:
6-1/2”
7”
I. Rear Axle Center Length:
J. Wheel Base Length:
11”
Model #
Engine//Motor Type
Part #
Cat #
Crated List
Wt. (lbs.) Price
2.5 HP Baldor electric 1PH 5800552 47104
110V/230V
2.5 HP Baldor electric
CC1025E
5800716 63217
1PH - 110V/230V - 5/8” shaft
5.5 HP Honda
CC1055H
5800620 82084
with 5/8” shaft
CC1025E
CC1055H
5.5 HP Honda
CC1100XL JOINT CLEANING MINI SAW
5800551 46851
90
2,644
90
2,620
90
2,507
90
$2,507
Features/Benefits:
• Upcut or downcut available
• Heavy duty adjustable handles
• Water valve can be mounted on left or right
• 1” arbor size with drive pin
• 11 HP GX-390 Honda engine
PUSH
14”
Sawing Equipment
2-1/4”
3,800
1”
1” or 5/8” option
3” x 2” x 3/4”
5” x 2” x 3/4”
CC1100XL Specifications:
• Maximum Depth of Cut: 4-5/8”
2,650
• Blade Shaft Diameter: 1”
• Arbor Size:
1” Diameter
• Front Wheels: 3” x 2” x 3/4”
• Rear Wheels: 8” x 2” x 3/4”
CC1100XL Dimensions:
A. Saw Height
40-3/4”
B. Minimum Length Pointer Up,
Handle Down
36”
C. Maximum Length Pointer Down,
Handle Up
68”
D. Handle Extension
10”
E. Frame Width
19-1/2”
F. Frame Length
16-5/8”
G. Saw Width
19-1/2”
H. Front Track
9-1/8”
I. Rear Track
18-1/4”
J. Wheel Base Length
8-1/2”
Upcut action
perfect for
cleaning out
joints!
CC1100XL JOINT CLEANING MINI SAW
04648
Blade
Capacity
14”
Crated Wt.
(lbs.)
212
08366
14”
212
Model #
Engine Type
Part #
Cat #
CC1113H-XL-14
11HP Honda Downcut
5801015
CC1113HU-XL-14
11 HP Honda Upcut
5801020
114
List Price
$2,540
2,540
CC150-EE EARLY ENTRY SAW
6”
PUSH
Horsepower as
rated by the engine
manufacturer
Blade not included
Features:
Benefits:
· Uses standard 6” diamond blades with 1” arbor
· Mechanical blade depth control
· Center lift mechanism
· Integrated lifting handle
· Special arbors not needed
· Reliable Honda, Briggs or Lifan engines
· Two front wheels for greater stability
· Non-marking polyurethane wheels
· Long lasting skid-plate
Patented
Skid-Plate
Adjustment Mechanism
Lasts through the Life of Several
Diamond Blades Part # 6040612
Cat # 16810
List Price: $41
CC150-EE EARLY ENTRY SAW
Model #
Engine
Part #
Cat #
Blade
Capacity
CC155H-EE-6
4.8 HP Honda GX160
5800749
04591
6”
115/148
$2,811
CC155B-EE-6
5.5 HP Briggs Vanguard
5801314
03682
6”
115/148
2,540
CC165L-EE-6
6.5 HP Lifan
5801106
34128
6”
115/148
2,260
CC150-EE OPTIONS
CC150-EE Specifications:
• Maximum Depth of Cut:
• Blade Shaft Diameter:
• Front Wheels:
• Rear Wheels:
Uncrated/Crated
List Price
Wt. (lbs.)
1-3/16”
3,800
1”
3” diameter
3” diameter
Description
Part #
Joint protectors - for use when
making cross-cuts in green
JOINTPRO-50
concrete (bag of 50)
Cat #
List Price
17145
$10.63
6” blade guard
6040553
16054
139
Catalytic muffler for Honda
GX160
2504794
29321
1,079
115
Sawing Equipment
Works Great with Our
Entry-Cut Line of Blades
See Page 51
The CC150-EE utilizes a one-inch
arbor, allowing you to use standard
diamond blades without worrying
about special arbors.
CC1200 PORTABLE SAW
14”-18”
PUSH
The Best Cutting
Value in a Portable
Walk Behind Saw
CC1200 with Optional
Water Tank
Tank Bracket/Lift Bale is
Included with Saws
Features:
• 18” maximum blade capacity
• 6-5/8” maximum cutting depth
• Heavy duty design
• Slip-on blade guard
• Left or right side sawing
• Screw feed raise & lower
• Cyclone air filter
• Built-in depth indicator
• Lifting bale/water tank bracket included
Horsepower as
rated by the engine
manufacturer
Benefits:
• Choice of Robin-Subaru, Honda or Lifan engines
• Heavy duty handles offer no slack and won’t rattle
like competitor handles
• Lightweight enough for 2 people to lift and carry
• Lifting bale makes transport easy
Sawing Equipment
CC1200 PORTABLE SAW
Part #
Cat #
---
Engine Type
CC1209LS-18
9 HP Lifan Gas
CC1209RS
9 HP EX270 Robin-Subaru Gas
5800630
87505
$2,025
5800631
85391
205/245
2,062
CC1209HS
8 HP GX270 Honda Gas
5800632
91814
2,282
5800633
93847
210/250
2,321
CC1213HS
5800636
88915
2,525
5800637
85390
250/290
2,565
CC1215LS
15 HP Lifan Gas
--
--
--
5801105
47822
205/245
1,949
Part #
Cat #
List Price
6049047
25948
$106
6040321
10155
2,554
Description
List Price
18” Capacity 18” Capacity Uncrated/Crated
List Price
Part #
Cat #
Weight (lbs.)
5801108
37650
205/248
$1,900
Model #
--
CC1200 OPTIONS
7 1/2 gallon water tank with 5/8” hose (includes tank, petcock, hose, coupler and bungee style tie-down)**
Propane conversion kit for 8 HP Honda (4.7 gallon tank, horizontal vapor)+
[must order with Part # 2502503]
Propane conversion kit for 11 HP Honda (4.7 gallon tank, horizontal vapor)+
[must order with Part # 6043551]
Extra slip-on blade guard 14”
6040322
10156
2,554
6016001
92016
311
Extra slip-on blade guard 18”
6016000
92017
349
** For dust suppression when dry cutting.
+ Propane conversion kits include the following: conversion to dual fuel, safety fuel lock, liquid
propane fuel tanks with float gauge and safety check connector. Extra lead time is required for fitting
propane fuel options.
116
Built -in Depth
Indicator is on
Every CC1200
Model
Precision screw feed raise and
lower system with lock
CC1209RS
with Robin-Subaru engine gives you a lower cost option
Maximum Depth of Cut with 14” blade:
4-5/8”
Maximum Depth of Cut with 18” blade:
6-5/8”
Blade Shaft RPM:
2,600
Blade Shaft Diameter:
1-1/4”
Arbor Size:
1” with single drive pin
Blade Mounting:
Right or Left
Blade Raise/Lower:
Precision screw feed
Handle Bars:
Adjustable
Depth Indicator:
Standard
CC1200 Dimensions:
A. Saw Height
46”/36”
B. Min Length Pointer Up,
Handle Down
39”
C. Max Length Pointer Down,
Handle Up
60”
D. Height to Hand Wheel 32”
E. Rear Axle Center Length13-3/4”
F. Frame Length
26”
G. Frame Width Front
23”
H. Front Axle Center Length9-1/2””
I. Frame Width Rear
17”
13”
117
Sawing Equipment
CC1215LS-18
with Lifan engine that has a 3-year warranty like Honda
CC1300XL SMALL WALK BEHIND SAW
PUSH
14”-20”
Benefits:
A Portable Walk
Behind Saw
That’s Built Extra
Tough
• Through rear axle for added
strength
• Choice of Honda engine,
Baldor or hydraulic motor
• Heavy duty handles offer no
slack and doesn’t rattle like
other adjustable handles
Features:
• Heavy duty frame design
• 3 V-belts for extra power
delivery to the blade shaft
• 7-5/8” maximum cutting depth
• Slip-on blade guards
• Solid, sealed self aligning
blade shaft bearings
• Left or right side sawing
• Screw feed raise & lower
• 20” maximum blade capacity
• Cyclone air filter
• 4 position adjustable handles
Parts List # 1800666
Horsepower as
rated by the engine
manufacturer
Great for
Basement work!
Blade not included
Sawing Equipment
CC1300XL WALK BEHIND SAWS
Uncrated/
14” Capacity 14” Capacity 14” Capacity 18” Capacity 18” Capacity
18” Capacity
Crated Weight
Part #
Cat #
List Price
Part #
Cat #
List Price
(lbs.)
Model #
Engine/Motor Type
CC1309HS-XL
8 HP Honda GX270
5800575
75066
$3,236
5800579
75070
225/250
$3,300
CC1313HS-XL
11 HP Honda GX390
5800576
75067
3,379
5800571
69995
250/290
3,452
CC1305E1-XL
5800577
75068
3,573
5800580
75071
340/355
3,611
CC1305E3-XL
5800578A
99977
3,730
5800581A
93652
350/367
3,775
CC1305E3-XL
5800578B
26493
3,730
5800581B
97080
355/372
3,775
CC1313HSU-XL
11 HP Honda GX390 Upcut
5800871
27131
3,901
5800872
26751
350/367
3,961
CC1300XL WALK BEHIND SAWS - 20” MODELS
Model #
CC1310E3XL-20
CC1310E3XL-20
CC1310E3XL-20
CC1313HSXL-20
CC1313HYXL-20
CC1313HYXL-20
CC1313HYXL-20
Engine/Motor Type
10 HP Baldor Electric 3 PH
w/switch box - 230V
10 HP Baldor Electric 3 PH
w/switch box- 460V
10 HP Dual Voltage Baldor Electric
230V & 460V
11 HP Honda GX390
15 GPM Hydraulic motor
20” Capacity
Part #
20” Capacity
Cat #
Uncrated/
List Price
5800589A
93810
350/380
$5,230
5800589B
93220
350/380
5,230
5800985
57763
385/415
6,094
5800723
5800724A
5800724B
5800724C
21855
37387
50852
37388
220/250
230/265
230/265
230/265
3,502
4,928
4,928
4,928
118
Heavy duty adjustable handles
and precision screw feed raise and lower
Electric Models are Suitable
Where Exhaust Fumes
are Not Allowed
Maximum depth of cut with 14” blade:
4-5/8”
6-5/8”
7-5/8”
Blade shaft RPM:
2,600
Blade shaft diameter:
1-1/4”
Arbor size:
1” with drive pin
Blade Mounting:
Right or Left
Blade Raise/Lower:
Handle Bars:
Adjustable
CC1300XL Options
Description
Part #
Cat #
List Price
Water Tank Kit with 5/8” hose (7.5 gal.)**
6049060
00998
$136
Extended Blade Shaft Kit (up to 1” spacing)
6048107
48388
43.79
Catalytic Muffler for 11HP Honda
2501567
78637
1,007
Propane Conversion Kit for 8 HP Honda
(4.7 gallon tank, horizontal vapor)+
[must also order with Part # 6048940]
6040321
10155
2,554
6040322
10156
2,554
Extra Slip-on Blade Guard 14”
6048912
97088
407
6048910
97883
444
6048904
98682
552
** For dust suppression when dry cutting.
Water tank kit not available for electric saw models.
A. Saw Height Max - Handle Up 41-3/8”
B. Saw Height Min - Handle Down35-1/4”
C. Saw Length Max - Pointer Down
61-1/4”
D. Saw Length Min - Pointer Up 38-1/2”
E. Frame Width
12-3/4”
F. Frame Length
23-5/8”
G. Saw Width
22-3/4”
H. Front Axle Center Length
7-1/2”
I. Rear Axle Center Length
15-1/2”
13”
Crated Dimensions:
54” x 30” x 48”
119
Sawing Equipment
+ Propane conversion kits include
the following: conversion to dual
fuel, safety fuel lock, liquid propane
fuel tanks with float gauge and
safety check connector.
Quick Change
Voltage On the Dual
Voltage Model
CC1500E BASEMENT SAW
14”-18”
PUSH
For Lightweight
Hassle-Free Sawing
Blade not included
Features:
Benefits:
· 6-1/2” maximum cutting depth
· Lightweight aluminum frame
· Screw feed raise and lower system
· Motor can be removed in 3-4 minutes to allow for a
single-person operation
· 1” arbor with single drive alignment pin
· Electric powered for basements with limited access
and where exhaust fumes are not allowed
Sawing Equipment
· Front pointer for staying on your cut-line
CC1500E BASEMENT SAW
Model #
Engine Type
Part #
Cat #
Blade
Capacity
CC1507E3-20
7.5 HP 460V, 3 PH
5801500
19131
20”
Uncrated/Crated
List Price
Weight (lbs.)
185/205
CC1500E OPTIONS
Description
Part #
CAT #
List Price
14” slip-on blade guard
6048912
97088
$407
18” slip-on blade guard
6048910
97883
444
120
$6,936
CC1500E Operator view showing the
heavy duty screw feed raise/lower
Enhanced V-Belt Tensioning System
Keeps Your Belts Tight
You’ve Never Seen Anything Like This!
• Quick Motor Removal Allows Easy
• One-Person Transportation
• Lightweight Aluminum Frame and Lightest
Weight Motor - Both 100 lbs. Each
CC1500E Specifications:
CC1500E Dimensions:
A. Saw Height (Min/Max)
41-1/2”
B. Minimum Length, Pointer Up,
Handle Down
42-3/8”
C. Maximum Length, Pointer Down,
Handle Up
62-5/8”
D. Height to Hand Wheel Controls4-3/8”
E. Frame Width Rear
14”
F. Frame Length
25-1/2”
G. Frame Width Front
25”
7-3/8”
17-1/8”
14-1/2”
C
B
D
A
F
G
E
I
H
J
121
Sawing Equipment
4-5/8”
6-1/2”
Blade shaft RPM:
2,000
1-1/4”
Arbor size:
1” with drive pin
Blade Raise/Lower:
Handle Bars:
Adjustable
Sawing Equipment
Leader in Customer Service
and Engineering Tech Support
on the Phones and in the Field
122
4-Stage Air Cleaner
The four stage dry air cleaner
gives your engine the best
possible protection and ensures
long service life. Includes an
inner filter to safeguard your
engine in the event the outer
filter is torn or damaged.
Slip-on Blade Guard
Slip-on blade guard with multi-spray tubes assure
your blade gets the right amount of water every time.
Lifting Hook
The entire saw can be lifted by this strong steel
hook that is bolted on the saw upright.
Easy Access Engine
Along with adjusting to the
operator’s height, the grips
can be moved outward
or inward depending on
preference.
Front End Weights
Front weights are installed
on the front of the saw
where its needed - over
the blade instead of the
back which could cause
unnecessary strain on the
operator.
123
Heavy Duty Crated Steel Frame Base
The strongest frame on the market prevents frame
‘tweaking’ from happening. This is sometimes caused
when a blade is pinched in the cut and saw could
raise and slam back down on the concrete.
Sawing Equipment
2-Position
Adjustable Handles
Oil dipstick and fill are easily found on the front
of the saw which makes servicing simple.
CC1800XL MEDIUM WALK BEHIND SAW
PUSH
SELF
PROPELLED
14”-20”
Large Saw Features
in a Medium Saw Design
Features:
Horsepower as
rated by the engine
manufacturer
· Heavy duty handle design
· Maximum cutting depth of
7-5/8” with 20” blade
· Left or right side sawing
· Screw feed raise and lower system
· Self aligning blade shaft bearings
Benefits:
Blade not included
· Variety of power options
· Handles can be pointed in or out for
operator ease and comfort
· Easy access to battery with heavy duty
battery isolator switch to prevent battery drain
· Lifting hook standard on all models
· Electric start with pull start backup (Briggs model)
Parts List #: 1801035 (gas)
1801037 (hydraulic & electric)
Sawing Equipment
CC1800XL PUSH SAWS
Part #
Cat #
14” Capacity
Part #
Cat #
20” Capacity Uncrated/Crated
w/14” Guard w/14” Guard List Price w/20” Guard w/20” Guard List Price
Weight (lbs.)
Model #
Engine/Motor Type
Belts
CC1875E1XL-P
CC1810E3XL-P
CC1810E3XL-P
CC1810E3XL-P
CC1813HXL-P
CC1813HEXL-P
CC1816BVXL-P
CC1818HYXL-P
CC1818HYXL-P
CC1818HYXL-P
11 HP Honda GX390
11 HP Honda GX390*
16 HP Briggs Vanguard
18 HP Danfoss Hydraulic (15gpm)
4
4
4
4
3
3
4
4
4
4
5800628
5800692A
5800692B
5800692C
5800694
5802258
5800696
5800698A
5800698B
5800698C
54480
54485
54565
54568
54486
27946
54487
54489
54571
54579
$5,194
5,183
5,183
5,183
3,331
3,999
3,995
3,807
3,807
3,807
5800629
5800693A
5800693B
5800693C
5800695
5802259
5800697
5800699A
5800699B
5800699C
54490
54497
54580
54581
54498
17244
54505
54506
54582
54593
$5,293
5,280
5,280
5,280
3,405
4,066
4,037
3,886
3,886
3,886
330/370
330/370
330/370
330/370
280/320
280/320
310/350
300/340
300/340
300/340
CC1875E1XL-S
CC1810E3XL-S
CC1810E3XL-S
CC1810E3XL-S
CC1813HXL-S
CC1813HEXL-S
CC1816BVXL-S
CC1818HYXL-S
CC1824HYXL-S
CC1830HYXL-S
CC1820HXL-S
CC1823BVXL-S
11 HP Honda GX390
11 HP Honda GX390*
16 HP Briggs Vanguard
18 HP Honda GX620* w
23 HP Briggs Vanguard* w
4
4
4
4
3
3
4
4
4
4
4
4
5800736
5800738A
5800738B
5800738C
5800643
5802260
5800645
5800647A
5800647B
5800647C
5800667
5801218
54507
54508
54596
54597
54536
27947
54537
54538
54598
54599
51234
22269
$6,275
6,263
6,263
6,263
4,296
5,180
4,619
4,912
4,912
4,912
6,311
5,775
5800737
5800739A
5800739B
5800739C
5800644
5802261
5800646
5800648A
5800648B
5800648C
5800668
5801219
54539
54540
54600
54601
54541
78112
54542
54549
54604
54623
53351
22271
$6,375
6,360
6,360
6,360
4,323
5,246
4,689
4,980
4,980
5,030
6,381
5,828
380/420
380/420
380/420
380/420
330/370
330/370
360/400
350/390
350/390
350/390
405/445
420/460
* Electric start
w Includes remote cyclone air cleaner
CC1800XL SELF-PROPELLED SAWS
124
CC1800XL control panel with screw feed, ignition
switch, adjustable handles and hour meter.
Handles have two sets of grips that can be positioned
outward or inward (as shown).
CC1820HXL-S
4-5/8”
6-5/8”
7-5/8”
Blade shaft RPM:
2,600
1-1/4”
Arbor size:
1” w/drivepin
Blade shaft drive: 3 belt for 11HP,
4 belt other models
Blade mounting:
Right or Left
Transmission (self propelled only):Eaton Model 6
Drive Speed:
0-80 feet/min
Fuel Capacity (gas models)
2 gallons
Electric Start (18-23 HP models): Standard
Low Oil Alert:
Standard
Tach/Hour Meter (18-23 HP models):
Standard
Part #
6048970
6049020
2801502
6048959
6048873
2501567
2504604
6048107
Cat #
66686
70611
36079
66687
66688
78637
08363
48388
List Price
$421
182
90.36
117
207
1,007
1,474
43.79
6040322
10156
2,554
6040323
10157
2,725
6048912
6048904
97088
98682
407
552
* For dust suppression when dry cutting only. (not available on electric saws)
wStandard on all 18HP and 23HP models.
**Standard on all electric saws with 20” blade capacity and saws over 15HP.
A. Saw Height (Min/Max)
35”/42”
Handle in Lower Position 48”
Handle in Upper Position
70”
D. Height to Hand Wheel Controls36”
E. Height to Top of Lift Bar
40-1/2”
F. Frame Width Rear
16”
G. Frame Length w/Weights
33”
H. Frame Width Front
22-3/4”
I. Front Axle Center Length
11”
J. Rear Axle Center Length
12”
K. Wheel Base Length
15-1/2”
Front Wheel Dimensions
5” x 1-1/2” x 3/4”
Rear Wheel Dimensions
6” x 1-1/2” x 5/8”
* Does not include blade guard
125
Sawing Equipment
+ Propane conversion kits include the
following: conversion to dual fuel, safety
fuel lock, liquid propane fuel tanks with
float gauge and safety check connector.
CC1800XL OPTIONS
Description
Electric Water Pump (electric start engines only)
Water Tank Kit* (7.5 gallon)
Tach/Hour Meter-Digital(displays engine RPM) w
Weight Kit (26 lbs.) **
Parking Brake
Catalytic Muffler for 11HP GX390 Honda Engines
Catalytic Muffler for 18HP GX690 Honda Engines
Extended Blade Shaft Kit for up to 1” spacing
14” Slip-on Blade Guard
20” Slip-On Blade Guard
CC2500 MEDIUM WALK BEHIND SAW
SELF
PROPELLED
14”-26”
Delivers the Power of a
Large Saw with
a Compact Size
Horsepower as
rated by the engine
manufacturer
Features/Benefits:
Sawing Equipment
· Screw feed raise/lower with
optional power raise/lower
· Positive gear drive to rear
axle via Eaton hydrostatic
transmission
· 2 position tilt handle bars
· Rigid high strength 3/16” steel
box frame with heavy bar
reinforcement
· Hydraulic raise/lower offered on
all models
· Maximum cutting depth of 10-3/8”
with 26” model
Blade not included
Parts List #: 1800418
Model #
Engine/Motor Type
Part #
Cat #
Blade
Capacity
Uncrated/Crated
Weight (lbs.)
List Price
CC2515E-14
CC2515E-14
CC2515E-14
CC2515E-20
CC2515E-20
CC2515E-20
CC2515E-26
CC2515E-26
CC2515E-26
CC2520H-14
CC2520H-20
CC2520H-26
CC2524H-14
CC2524H-20
CC2524H-26
CC2525HY-14
CC2525HY-20
CC2525HY-26
CC2527KC-14
CC2527KC-20
CC2527KC-26
18 HP Honda GX630 **
20.5 HP Honda GX660 **
25 HP Hydraulic 25 GPM @ 2500 PSI
27 HP Kohler Command **
27 HP Kohler Command **
27 HP Kohler Command ** +
5800400A
5800400B
5800400C
5800401A
5800401B
5800401C
5800402A
5800402B
5800402C
5800406
5800407
5800408
5800492
5800493
5800494
5800489
5800490
5800491
5800597
5800598
5800599
48413
99980
27948
98001
93694
27951
94379
94409
45795
48418
47164
48419
48423
48424
48425
48426
48427
48428
79036
79037
78816
14”
14”
14”
20”
20”
20”
26”
26”
26”
14”
20”
26”
14”
20”
26”
14”
20”
26”
14”
20”
26”
700/770
700770
700/770
710780
710/780
710/780
720/790
720/790
720/790
600/670
610/680
620/690
590/660
600670
610/680
610680
610/680
610680
590/670
610680
620/690
$8,745
8,745
8,745
8,823
8,823
8,823
9,050
9,050
9,050
9,283
9,371
9,579
9,888
9,961
10,180
7,599
7,673
7,888
10,813
10,887
11,103
50 cycle motors available on request. (motor starter switch box included).
** Includes remote cyclone air cleaner.
126
+ 26” blade guard cannot be used on left side of saw.
CC2500 Control Panel Shown
with Optional Raise/Lower Control Lever
25 HP Hydraulic
Powered
CC2500 OPTIONS
+ Propane conversion kits include the
following: conversion to dual fuel, safety
fuel lock, liquid propane fuel tanks with
float gauge and safety check connector.
26” Tapered Mount Blade Guard
Part #
6047932
6047933
6047934
6047967
6047970
6047980
6047997
6047998
6047999
2504604
6010630B
6010631B
6010632B
Cat #
47451
48432
48433
48002
47467
52974
78817
79041
79042
08363
25424
25426
23197
List Price
$139
418
154
743
1,801
1,801
1,180
2,099
2,099
1,474
773
814
961
6040328
42101
2,836
6040324
10158
2,687
6010950
6010952
20011
08213
6010954
19322
376
558
719
wNot available on electric saw models (CC2515E) or hydraulic saw models
(CC2525HY) without Power Raise/Lower Assembly.
* Includes battery and alternator.
CC2500 Dimensions:
A. Saw Height
Handle in Lower Position C. Maximum Length, Pointer Down,
D. Handle Extension
E. Frame Width
F. Frame Length
G. Saw Width
Crated Saw Dimensions
127
47-1/2”
47-1/2”
107-1/2”
24”
20”
38”
26-1/2”
15-1/2”
17-3/4”
20”
6” x 2” x 1”
8” x 2” x 1”
52” L x 34” W x 55” H
Sawing Equipment
Description
Water Safety Switch w
Water Pump (electric) w
4-5/8”
Spot Light w
7-3/8”
10-3/8”
Electric Raise/Lower Assembly for Gas Saw
Blade shaft RPM:
Varies
Electric Raise/Lower Assembly for Electric Saw *
1-1/2”
Electric Raise/Lower Assembly for Hydraulic Saw *
Arbor size:
1” w/drivepin
Hydraulic Raise/Lower Assembly for Gas Saw
Blade shaft drive:
4 belt thru 25HP,
Hydraulic Raise/Lower Assembly for Electric Saw *
5 belt for 27HP
Hydraulic Raise/Lower Assembly for Hydraulic Saw *
Blade mounting:
Right or Left
Catalytic Muffler for 18 HP and 20.5 HP Honda
Transmission (self propelled only):Eaton Model 6
Blade stacking kit - 5” flange (for blades 1-1/2” apart)
Drive Speed:
0-130 feet/min
Fuel Capacity (gas models)
5 gallons
Blade spacing kit - 5” flange (for blades 2” apart)
Blade spacing kit - 5” flange(for blades 4” apart)
INCLUDES:
Propane Conversion Kit for 20.5 HP Honda
Electric Start (18-23 HP models) Low Oil Alert
(4.7 gallon tank, horizontal vapor) +
Tach/Hour Meter (18-23 HP models)
Frame Lift
Quick Disconnect Blade Flanges Cutting Depth Indicator
(4.7 gallon tank, horizontal vapor) +
Telescoping front pointer
CC3500 WALK BEHIND SAW
SELF
PROPELLED
14”-30”
Ideal for municipalities
and rental stores!
Have You Seen Me Lately?
Completely Redesigned!
30% more torque
with new jackshaft design
(ON GAS MODELS)
Benefits:
· Fits through a 30” door
· Strongest frame on the market
· Utilizes many of the same heavy-duty
components used on our bigger saws
· Great mid-size saw for service, utility work
and rental
Features:
· Maximum 30” blade capacity
· Self-propelled hydrostatic transmission
· Cyclone air cleaner
· Slip-on blade guard
Blade not included
Parts List # : 1801378 (Briggs & Kohler gas)
1800951 (Baldor & Lincoln Electric)
Horsepower as
rated by the engine
manufacturer
575V or 50 cycle motors
available on request. (motor
starter switch box included).
Quick-release Blades/Flange,
Slip-on Blade Guards and
Double Concave Roller
Bearing are standard on all
CC3500 models.
Sawing Equipment
MODEL #
Engine/Motor Type
Part #
CAT #
CC3535JBV-14
CC3535JBV-20
CC3535JBV-26
CC3535JBV-30
CC3540JK-14
CC3540JK-20
CC3540JK-26
CC3540JK-30
CC3520E-14
CC3520E-14
CC3520E-14
CC3520E-20
CC3520E-20
CC3520E-20
CC3520E-26
CC3520E-26
CC3520E-26
CC3520E-30
CC3520E-30
CC3520E-30
CC3530E-14
CC3530E-20
CC3530E-26
CC3530E-30
35 HP Briggs and Stratton Vanguard
40 HP Kohler Command
30 HP Lincoln Electric 460V
5801305
5801306
5801307
5801308
5801301
5801302
5801303
5801304
5800784A
5800784B
5800784C
5800785A
5800785B
5800785C
5800786A
5800786B
5800786C
5800787A
5800787B
5800787C
5800788A
5800789A
5800790A
5800791A
25324
25330
25331
25337
25315
25319
25320
25322
50442
03729
03730
50443
57116
03733
50444
51919
03739
50446
68486
03743
50439
50440
50392
50441
128
Blade
Uncrated/Crated
Capacity
Weight (lbs.)
14”
20”
26”
30”
14”
20”
26”
30”
14”
14”
14”
20”
20”
20”
26”
26”
26”
30”
30”
30”
14”
20”
26”
30”
950/1,020
960/1,030
970/1,040
980/1,050
950/1,020
960/1,030
970/1,040
980/1,050
1,005/1,075
1,005/1,075
1,005/1,075
1,015/1,085
1,015/1,085
1,015/1,085
1,025/1,095
1,025/1,095
1,025/1,095
1,035/1,105
1,035/1,105
1,035/1,105
1,035/1,105
1,045/1,115
1,055/1,125
1,065/1,135
List Price
$14,453
14,509
14,567
14,735
16,848
16,905
16,973
17,029
14,973
14,973
14,973
15,052
15,052
15,052
15,208
15,208
15,208
15,360
15,360
15,360
15,855
15,931
16,084
16,242
Briggs & Stratton engines have a 3-year warranty!
CC3500 Control Panel Shown with Optional Shaft
and Tachometer.
CC3500 OPTIONS
4-3/8”
7-3/8”
10-3/8”
12-3/8”
1-3/4”
Arbor size:
1” w/drivepin
Blade shaft drive:
6 belt
Blade mounting:
Right or Left
Blade raise & lower:
Electro-hydraulic pump
Transmission:
Eaton Model 10
Drive speed:
0-200 feet/min
Air filter:
4 stage
Fuel capacity (gas models)
6 gallons
INCLUDES:
Electric start Telescoping front pointer
Hour meter Cutting depth indicator
Frame lift Quick disconnect blade flanges
Description
Part #
CAT #
List Price
Water Safety Switch
6047932
47451
$139
6011032
02506
418
Parking Brake
6011228
81191
349
Spot Light
6010112
02427
154
Spot Light Kit for Soft Start Electric Models
6012182
27477
228
Shaft Tachometer (CC3535 model)
Blade spacing kit - 5” flange
(for blades 1-1/2” apart)
(for blades 2” apart)
6011434
49732
501
6010630B
25424
773
6010631B
25426
814
6010632B
23197
961
Lowering Speed Metering Valve
6010227
02480
234
Soft Start Controller Add On for 230/460 volt
6011449A
14278
3,723
Soft Start Controller Add On for 575 volt
6011449B
14279
3,723
Propane (bi-fuel) Conversion Kit
(Briggs models only)
6040564
25338
2,982
6010950
20011
376
6010952
08213
558
6010954
19322
719
6010956
20456
889
+ Propane conversion kits include the following:
conversion to dual fuel, safety fuel lock, liquid
propane fuel tanks with float gauge and safety
check connector.
CC3500 Dimensions:
A. Saw Height
47-1/4”
Handle in Lower Position 55-1/2”
Handle in Upper Position 112”
D. Handle Extension
24”
E. Frame Width
23-3/8”
F. Frame Length
39-1/2”
G. Saw Width
29-7/8”
H. Front Axle Center Length 18-1/2”
20-3/4”
18-1/4”
K. Blade Shaft Max Height
16-1/2”
6” x 2” x 1”
8” x 2” x 1”
52” L x 34” W x 54-1/2” H
129
Sawing Equipment
Water Pump (electric)
CC3700 WALK BEHIND SAW
SELF
PROPELLED
14”-36”
Features:
Benefits:
· 36” maximum blade capacity
· Cyclone air cleaner (diesel model)
·Compact large saw
·Forward position motor for more
weight at the blade and less on
the operator
·Frame designed for higher torque
from high horsepower engines
·One hand sawing control
Powerful
Multi-Application
Saw
Big Power That Fits
Through a
30” Doorframe
Horsepower as
rated by the engine
manufacturer
Parts List #: 1800774 (electric)
1800878 (diesel)
Blade not included
Sawing Equipment
Model #
Engine/Motor Type
Part #
Cat #
CC3725E-14
CC3725E-14
CC3725E-14
CC3725E-20
CC3725E-20
CC3725E-20
CC3725E-26
CC3725E-26
CC3725E-26
CC3725E-30
CC3725E-30
CC3725E-30
CC3725E-36
CC3725E-36
CC3725E-36
CC3730E-14
CC3730E-20
CC3730E-26
CC3730E-30
CC3730E-36
CC3740E-20
CC3740E-26
CC3740E-30
CC3740E-36
CC3728-14
CC3728-20
CC3728-26
CC3728-30
CC3728-36
30 HP Deutz Diesel
30 HP Deutz Diesel
30 HP Deutz Diesel
30 HP Deutz Diesel
30 HP Deutz Diesel
5800445A
5800445B
5800445C
5800446A
5800446B
5800446C
5800447A
5800447B
5800447C
5800448A
5800448B
5800448C
5800449A
5800449B
5800449C
5800381A
5800382A
5800383A
5800384A
5800385A
5800436A
5800437A
5800438A
5800439A
5800440
5800441
5800442
5800443
5800444
14306
03765
03781
07869
07870
07878
03782
97597
03783
32087
03797
03805
07716
03811
03829
14300
97788
99455
15225
60786
50871
97350
99107
10497
48476
48477
48478
48479
48480
130
Blade
Capacity
14”
14”
14”
20”
20”
20”
26”
26”
26”
30”
30”
30”
36”
36”
36”
14”
20”
26”
30”
36”
20”
26”
30”
36”
14”
20”
26”
30”
36”
Uncrated/Crated
Weight (lbs.)
1,385/1,465
1,385/1,465
1,385/1,465
1,395/1,475
1,395/1,475
1,395/1,475
1,405/1,485
1,405/1,485
1,405/1,485
1,415/1,485
1,415/1,485
1,415/1,485
1,425/1,495
1,425/1,495
1,425/1,495
1,350/1,430
1,360/1,440
1,370/1,450
1,380/1,460
1,390/1,470
1,4351,515
1,445/1,525
1,455/1,535
1,465/1,545
1,400/1,480
1,410/1,490
1,420/1,500
1,430/1,510
1,440/1,520
List Price
$15,853
15,853
15,853
16,001
16,001
16,001
16,227
16,227
16,227
16,467
16,467
16,467
16,681
16,681
16,681
16,438
16,584
16,804
17,025
17,241
17,025
17,252
17,480
17,709
21,026
21,172
21,542
21,763
21,985
CC3700 Starter Box
CC3700 OPTIONS
CC3700 Control Panel
Large electric saws feature an electric controller/
starter and a 2” emergency stop button within
easy reach of the operator.
4-1/2”
7-1/2”
10-1/2”
11-3/4”
1-3/4”
Arbor size:
1” w/drivepin
Blade shaft drive:
8 belt
Blade mounting:
Right or Left
Transmission:
Eaton Model 10
Drive speed:
0-200 feet/min
Air filter:
4 stage
Fuel capacity (gas models)
6 gallons
Hour Meter
Frame lift
PART #
6047932
6011032
6010112
6012182
6011228
6012168
6010227
CAT # List Price
47451
$139
02506
418
02427
154
27477
228
81191
349
06788
717
02480
234
6010630A
23186
773
6010631A
23187
814
6010632A
16558
961
6012187A
14310
3,723
6012187B
14311
3,723
6010950
6010952
6010954
6010956
6010958
20011
08213
19322
20456
13375
376
558
719
889
998
* For 20” maximum blade capacity.
** For electric saws - factory installed
CC3700 Dimensions:
A. Saw Height
49”
116”
D. Handle Extension
24”
E. Frame Width
25-3/4”
F. Frame Length
46”
G. Saw Width
32-1/4”
H. Front Axle Center Length 19-7/8”
22-5/8”
21-3/8”
19-1/2”
6” x 2” x 1”
8” x 2” x 1”
52” L x 34” W x 55” H
131
Sawing Equipment
INCLUDES:
Electric start
Quick disconnect blade flanges
Cutting depth indicator
DESCRIPTION
Water Safety Switch
Spot Light
Parking Brake
Shaft Tachometer
*Blade stacking kit - 4-1/2” flange
*Blade spacing kit - 4-1/2” flange
*Blade spacing kit - 4-1/2” flange
Soft Start Controller Add On
for 230/460 volt **
for 575 volt **
CC3700TE ELECTRIC TWIN SHAFT SAW
Features:
SELF
PROPELLED
20”-36”
Benefits:
· 36” maximum blade
capacity
· The most powerful
electric saw available
on a medium saw platform
· Self-propelled hydrostatic
transmission
· Twin shafts for quick blade
size change
· Frame designed for higher
torque from high
horsepower engines
· Splash-proof control box
with amp meter
Horsepower as
rated by the engine
manufacturer
Run More Blade
Sizes at Optimal
Speeds
Sawing Equipment
CC3700TE Dual Shaft Electric Saws
Uncrated/Crated
Blade
List Price
Capacity
Weight (lbs.)
Model #
Engine Type
Part #
Cat #
CC3730TE-20
30HP Dual Shaft Lincoln Electric (460 V)
5800671A
49602
20”
1,290/1,370
$19,180
CC3730TE-26
5800673A
10135
26”
1,300/1,445
19,391
CC3730TE-30
5800675A
10138
30”
1,310/1,455
19,605
CC3730TE-36
5800677A
10140
36”
1,320/1,405
19,814
CC3730TE-20
5800671B
03180
20”
1,310/1,445
19,180
CC3730TE-26
5800673B
10136
26”
1,365/1,445
19,391
CC3730TE-30
5800675B
10139
30”
1,370/1,455
19,605
CC3730TE-36
5800677B
10142
36”
1,385/1,365
19,814
CC3740TE-20
5800681A
99552
20”
1,365/1,445
19,636
CC3740TE-26
5800683A
10151
26”
1,370/1,455
19,856
CC3740TE-30
5800685A
10153
30”
1,385/1,465
20,078
CC3740TE-36
5800687A
44130
36”
1,395/1,475
20,296
CC3740TE-20
5800681B
10150
20”
1,365/1,445
19,636
CC3740TE-26
5800683B
10152
26”
1,370/1,455
19,856
CC3740TE-30
5800685B
10154
30”
1,385/1,465
20,078
CC3740TE-36
5800687B
03255
36”
1,395/1,475
20,296
5800687C
05424
36”
1,395/1,475
22,625
CC3740TE-36 40HP Dual Shaft Lincoln Electric (575 V) 50Hz
Quick-release bladeshaft/flange, slip-on blade guards, quick release rear wheels, double concave roller bearings are standard.
132
Twin Blade Shafts Allows
Quick Blade Size Changes
CC3700TE Control Panel
Large electric saws feature an electric controller/starter
and a 2” emergency stop button within
easy reach of the operator.
CC3700TE Specifications:
CC3700TE OPTIONS
7-1/2”
DESCRIPTION
10-1/2”
11-3/4”
Spot Light
14-3/4”
1-3/4”
Arbor size:
1” w/drivepin
Blade shaft drive:
8 belt
for 230/460 volt*
Blade mounting:
Right or Left
Electro-hydraulic pump Soft Start Controller Add On for 575 volt*
Transmission (self propelled only): Eaton Model 10
Drive speed:
0-200 feet/min
INCLUDES:
Hour meter
Amp meter
Frame lift
* Factory installed
PART # CAT # List Price
6011032 02506
$418
6010112 02427
154
6012182 27477
228
6010227 02480
234
6012187A 14310
3,723
6012187B
6010952
6010954
6010956
6010958
3,723
558
719
889
998
14311
08213
19322
20456
13375
133
Sawing Equipment
CC3700TE Dimensions:
A. Saw Height
49”
B. Minimum Length, Pointer Up
Handle in Lower Position
59”
116”
D. Handle Extension
24”
E. Frame Width
25-3/4”
F. Frame Length
46”
G. Saw Width
32-1/4”
19-7/8”
22-5/8”
21-3/8”
19-1/2”
6” x 2” x 1”
8” x 2” x 1”
Crated Saw Dimensions 52” L x 34” W x 55” H
Sawing Equipment
Diamond Products is
Constantly Looking for
New Improvements to
Please Our Customers
Differential Drive System
allows for easy maneuvering by preventing
heavy lifting when moving the saw.
Rear Pivot increase the ability to
moving the saw by pivoting the drive
wheels. The wheels are installed on the
back for front pivot. The wheels are set
forward for back pivot capability.
134
Comprehensive Control Panel
gives all the gauges and controls right in
front of the operator
3-Speed Gearbox
Pivot Handles allow
gives you 3 speeds without having to change
belts and sheaves. This allows you to have the
right speeds to finish the job faster.
you to adjust the angle of
the handlebars.
Dual Water Sprayer
allows the right amount of water
to hit the blade while sawing.
The water is evenly spread over
the blade for cooling.
Recommended greasing every 25 hours.
Heavy Duty Crated
Steel Frame Base
The strongest frame on
the market prevents frame
‘tweaking’ from happening.
This is sometimes caused
when a blade is pinched in
the cut and the saw could
raise and slam back down
onto the concrete.
Differential Lock provides positive drive to
both rear wheels for maximum traction
135
Sawing Equipment
Easy to Access PTO bearings for greasing.
CC4100D DIFFERENTIAL DRIVE
SELF
PROPELLED
14”-36”
3-SPEED MODELS
NOW AVAILABLE
Blade not included
Horsepower as
rated by the engine
manufacturer
Benefits:
Features:
Sawing Equipment
· Up to 14-3/4” cutting depth with
36” blade
· Quick release bladeshaft and flange
· Powerful Kubota turbo diesel engine
· 4-stage air cleaner with maintenance
indicator for maximum engine protection
· 3 speed gearbox models available
· Differential drive system allows for easy
maneuvering - no heavy lifting to turn
· Rear pivot models increase
maneuvering capabilities
· Fits through a 30” door frame
· Differential lock provides positive
drive to both rear wheels for maximum
traction
· Bladeshaft tachometer lets you know
the blade speed - where you need it
CC4100D WITH DIFFERENTIAL DRIVE
Model #
CC4144D XL-14RP
CC4144D XL-20RP
CC4144D XL-26RP
CC4144D XL-30RP
CC4144D 3XL-14RP
CC4144D 3XL-20RP
CC4144D 3XL-26RP
CC4144D 3XL-30RP
CC4144D 3XL-36RP
Engine/Description
Part #
Cat #
44 HP Kubota Diesel- Rear Pivot
5801030
5801031
5801032
5801033
5802274
5802275
5802276
5802277
5802278
02780
02783
02813
02821
28217
28218
28219
28220
28221
44 HP Kubota Diesel - Rear Pivot
44 HP Kubota Diesel - Rear Pivot - 3-speed
44 HP Kubota Diesel -Rear Pivot - 3-speed
44 HP Kubota Diesel- Rear Pivot - 3-speed
136
Blade Uncrated/Crated
List Price
Capacity
Weight (lbs.)
14”
20”
26”
30”
14”
20”
26”
30”
36”
1,100/1,170
1,110/1,180
1,120/1,190
1,130/1,200
1,100/1,170
1,110/1,180
1,120/1,190
1,130/1,200
1,140/1,210
$24,717
24,824
24,920
25,038
27,800
28,100
28,400
28,600
28,900
CC4100D Specifications:
4-3/8”
7-1/2”
10-1/2”
11-3/4”
14-3/4”
1-11/16”
Arbor size:
1” w/drivepin
Blade shaft drive: 6 belt
Blade mounting:
Right or Left
Transmission:
Eaton Model 10
Fuel capacity:
6 gallons
Air filter:
4-stage with indicator
Drive speed:
0-200 feet/min
INCLUDES:
Hour meter
Tachometer
High temperature shut off
Frame lift
Available with Optional
3-Speed Gear Box
CC4144D SAW OPTIONS
DESCRIPTION
Water Pump kit
14” Tapered Mount Blade
PART #
6045205
6010950
6010952
6010954
6010956
6010958
CAT #
20752
20011
08213
19322
20456
13375
List Price
$363
376
558
719
889
998
137
Sawing Equipment
CC4100D Dimensions:
A. Saw Height
44-1/2”
Handle in Lower Position * 47”
100”
D. Handle Extension
20”
E. Frame Width
24”
F. Frame Length
36-1/2”
G. Saw Width
31”
19”
21”
17”
Blade Shaft Max Height
16-1/2”
6” x 2” x 1”
10” x 3” x 1”
CC6500XLS WALK BEHIND SAW
14”-36”
Fast Cutting, Fuel
Efficient and Reliable
49 HP & 60 HP Diesel
SELF
PROPELLED
Horsepower as
rated by the engine
manufacturer
With Bladeshaft
Tachometer
(Where It’s Needed)
Not at the Engine
Gives True Blade Speed
Blade not included
Sawing Equipment
Features:
Benefits:
· Up to 36” blade capacity
· One-hand sawing control
· Two diesel engine choices
· Quick release bladeshaft/flange and rear wheels
· Double concave roller bearings
· Self propelled with hydrostatic transmission
· Strongest frame on the market
· Fits through a 36” wide door frame
· Less rear weight for easy maneuvering and reduced
operator fatigue
CC6550XLS SAWS
Blade
Capacity
14”
20”
26”
30”
36”
Uncrated/Crated
Weight (lbs.)
1,410/1,510
1,420/1,520
1,430/1,530
1,454/1,545
1,445/1,545
86489
14”
1,420/1,520
$25,408
5800751
86481
20”
1,430/1,530
25,633
5800752
86491
26”
1,440/1540
25,855
60 HP Deutz Turbo Diesel
5800753
86492
30”
1,455/1,555
26,078
5800754
86345
36”
1,465/1,565
26,301
Model #
Engine Type
Part #
Cat #
CC6550XLS-14
CC6550XLS-20
CC6550XLS-26
CC6550XLS-30
CC6550XLS-36
49 HP Deutz Diesel
49 HP Deutz Diesel
49 HP Deutz Diesel
49 HP Deutz Diesel
49 HP Deutz Diesel
5800809
5800810
5800811
5800812
5800813
15054
15055
15042
15060
15062
CC6560XLS-14
5800750
CC6560XLS-20
CC6560XLS-26
CC6560XLS-30
CC6560XLS-36
List Price
$23,567
23,596
23,643
24,157
24,285
CC6560XLS SAWS
138
3-Speeds Models Coming 2nd Quarter, 2012
The CC6500XLS Control Panel is Easy to Use
CC6500XLS OPTIONS
CC6500XLS Specifications:
4-1/2”
7-1/2”
10-1/2”
11-3/4”
14-3/4”
1-3/4”
Arbor size:
1” w/drivepin
Blade shaft drive: 10 belt
Blade mounting:
Right or Left
Transmission:
Eaton Model 10
Drive speed:
0-200 feet/min
Air filter:
4 stage
Fuel capacity
9 gallons
CC6500XLS Dimensions:
A. Saw Height
51”
Handle Out
124”
D. Handle Extension
24”
E. Frame Width (Rear)
27-5/8”
F. Frame Width (Front)
31-1/4”
G. Frame Length
49 1/2”
H. Saw Width*
32-1/4”
21-3/4”
24-1/2”
23-7/8”
L. Blade Shaft Max Height
19-1/2”
6” x 2” x 1”
8” x 2” x 1”
52” L x 34” W x 55” H
*Saw width is reduced by removing blade guard to
permit entry through a 36” opening
6010842A
15065
$671
6010842B
15071
671
6011309
6010522
6011032
6010112
6010227
95172
67821
02506
02427
02480
1,738
139
418
154
234
6010630A
23186
773
6010631A
23187
814
6010632A
16558
961
6011228
6010596
6010950
6010952
6010954
6010956
6010958
81191
70748
20011
08213
19322
20456
13375
349
176
376
558
719
889
998
*Available only when ordering a new saw.
Use part # 2703449 for existing saw.
139
Sawing Equipment
INCLUDES:
Electric start
Bladeshaft tachometer
Hour meter
Amp meter w/warning light
Frame lift
Slip-on blade guard
DESCRIPTION
Oil Bath Bladeshaft Upgrade for 14”-26”
Blade Shafts - ordered with saw
Oil Bath Bladeshaft Upgrade for 30”-36”
Blade Shafts - ordered with saw
Catalytic Muffler Upgrade*
Water Safety Switch
Spot Light
Blade stacking kit - 4-1/2” flange
Blade spacing kit - 4-1/2” flange
Parking Brake
Glow Plug
Sawing Equipment
Most Complete line of
Products with the Most
Choices in Equipment and
Diamond Tools
140
Four Stage Air Cleaner
Control Panel
The four stage dry air cleaner gives the engine the best
possible protection and ensures long service life.
Includes an inner filter to safeguard your engine in the
event the outer filter is torn or damaged.
With emergency shutoff, tachometer gauge and
one hand throttle control
Spot Light Kit
Tie Downs are located in various spots
around the saw - front, rear and top to make it
easy when transporting.
Work at night with the high powered spot light.
The lens can be adjusted to point at your cutting path
Sawing Equipment
Handle Adjustment
Patent-pending handle adjustment
makes it easy to move the handles
where you need them
Easy Access Panel allows
quick maintenance along with vented
cover for air circulation. Operatorfriendly with foot pedal to give more
leverage when moving the saw.
141
In-Line Sawing Configuration
with right angle direct drive water cooled
gear box. Oil bath bladeshaft gearbox
allows for lower maintenance as the drive
belts stay out of the damaging slurry.
CC7074 IN-LINE SAW
Increased Production
· Lower Maintenance Costs
· Better Fuel Efficiency
20”-48”
SELF
PROPELLED
Available With
Enhanced Clutch
Assembly:
Allows the blade to be
disengaged while the
engine is running
Interim Tier IV Engine
Horsepower as
rated by the engine
manufacturer
Sawing Equipment
The Next
Generation of
Sawing
Features:
Benefits:
· Inline configuration with right angle
direct drive gearbox
· Water cooled right angle gearbox
· Hydraulic wheel motor drive
· Patent pending handle adjustment
· Bladeshaft gearbox:
- Oil bath for low maintenance
- Keeps drive belts out of the slurry
· Automatic water shut-off
- Conserves water
- Eases operation
CC7074 IN-LINE SAWS
Model #
Engine Type
CC7074-20
CC7074-26
CC7074-30
CC7074-36
CC7074-42
CC7074-48
CC7074C-20
CC7074C-26
CC7074C-30
CC7074C-36
CC7074C-42
CC7074C-48
74 HP Kubota Turbo Diesel
74 HP Kubota Turbo Diesel with Clutch
Option A Option A Option B Option B
Uncrated/
Standard Standard Deeper Deeper Blade
Crated Weight
Cut
Cut
Cut
Cut Capacity
(lbs.)
Part #
Cat #
Part #
Part #
5801050
37619
20”
2,000/2,125
5801051
07865
26”
2,015/2,140
5801052
07358
30”
2,025/2,150
5801065
07511
36”
2,060/2,185
5801066
37629
42”
2,075/2,200
5801067
37630
48”
2,175/2,300
5801056
36442
20”
2,050/2,175
5801057
36443
26”
2,065/2,190
5801058
36444
30”
2,075/2,200
5801071
30000
36”
2,110/2,235
5801072
36451
42”
2,125/2,275
5801073
30020
48”
2,225/2,350
3-Speed Models Available 2nd Qtr 2012
142
List Price
$34,047
34,107
34,187
34,567
34,749
34,830
36,725
36,785
36,864
37,245
37,395
37,507
CC7074 OPTIONS
Description
Part #
Cat #
List Price
6017183
21337
$360
Weight Kit (55 lbs.)*
6017244
12608
303
6010952
08213
558
6010954
19322
719
6010956
20456
889
6010958
13375
998
6010960
08216
1,127
6010962
24618
1,259
* Standard on CC7074-48
143
CC7074 Dimensions:
A. Saw Height
52-1/2”
B. Minimum Length
63-1/2”
C. Maximum Length, Pointer
140”
28”
D. Maximum Handle Extension
E. Frame Length
53-3/4”
F. Wheel Base Length
24-1/4”
G. Saw Width
36-1/2”
H. Frame Width
29”
I. Front Wheels Inside Width
20-1/2”
J. Rear Wheels Outside Width
27-3/4”
K. Inner Flange to Inner Flange Width
31-3/4”
L. Ground Clearance (Saw Level) 2-1/2”
L. Ground Clearance (Saw Raised) 1-3/4”
Blade Raise Maximum Height
26”
8” x 3” with
Polyurethane Tread
10” x 3” with
Rubber Tread
52” L x 34” W x 55” H
Sawing Equipment
7-1/4” (5” flange)
10-1/4” (5” flange)
12-1/4” (5” flange)
14-3/4” (6” flange)
17-1/4” (7” flange)
19-3/4” (8” flange)
Engine:
Kubota V3307-DI-T Turbo
Engine Specs:
4 Cylinder, 3.3 Liter
Max Engine Power:
74.3HP at 2,600 RPM
Power at the Blade Shaft:
70 Horsepower
Emission Regulation:
EPA Tier 3/Interim Tier 4
2”
Arbor size:
1” w/drivepin
Blade shaft bearings:
Multiple ball bearings
in oil bath
Blade shaft drive:
20 V-belts - 4 power bands
Blade mounting:
Right or Left
Blade Coolant:
Dual multi-spray tubes
Drive speed:
0-250 feet/min
forward and reverse
Transmission:
Hydro pump powering
dual wheel motors
Air filter:
4 stage w/restriction indicator
Fuel capacity
9 gallons
CC7070 TRANSVERSE SAW
SELF
PROPELLED
14”-42”
17-1/4” Cutting Depth
with a 42” Blade
Fits Through a 36”
Doorway!
Horsepower as
rated by the engine
manufacturer
Sawing Equipment
Blade not included
Features:
Benefits:
· Interim tier 4 compliant
· Bladeshaft gearbox:
- Oil bath for low maintenance
- Keeps drive belts out of the slurry
· Front pivot
· Oil bath blade shaft
· Automatic water shut-off
- Conserves water
- Eases operation
· Hydraulic wheel motor drive
· Quick set handle adjustment
· Front pivot allows better cutting performance due
to having more weight over the blade shaft
CC7070 TRANSVERSE SAWS
Model #
Engine Type
Part #
Cat #
Blade
Capacity
Uncrated/
Crated Weight
(lbs.)
List Price
CC7070-14
5800840
29659
14”
1,890/2,015
$32,204
CC7070-20
5800841
29660
20”
1,900/2,025
32,288
CC7070-26
5800842
29661
26”
1,915/2,040
32,351
CC7070-30
5800843
29662
30”
1,925/2,050
32,403
CC7070-36
5800844
29666
36”
1,960/2,085
32,498
CC7070-42
5800845
29669
42”
1,975/2,100
32,708
144
CC7070 Transverse Specifications:
CC7070 TRANSVERSE OPTIONS
Description
Part #
Cat # List Price
6017183 21337
$360
Weight Kit (55 lbs.)
6017244 12608
303
14” Tapered Mount Blade Guard 6010950 20011
376
558
719
889
998
1,127
145
CC7070 Transverse Saw Dimensions:
A. Saw Height
55-1/2”
B. Minimum Length
59-3/4”
C. Maximum Length, Pointer
138”
D. Maximum Handle Extension 28”
E. Frame Length
50”
F. Wheel Base Length
24-1/2”
G. Saw Width
38-3/4”
H. Frame Width (rear)
29”
H. Frame Width (front)
31-1/4”
I. Front Wheels Inside Width
20-1/2”
J. Rear Wheels Outside Width
27-3/4”
K. Inner Flange to Inner Flange Width33-3/4”
L. Ground Clearance (Saw Level) 2-1/2”
Ground Clearance (Saw Raised)1-3/4”
Blade Raise Maximum Height
23”
8” x 3”
with Polyurethane Tread
10” x 3”
with Rubber Tread
Sawing Equipment
4-1/2” (4.5”flange)
7-1/2” (4.5”flange)
10-1/2” (4.5”flange)
11-3/4” (6” flange)
14-3/4” (6” flange)
17-1/4” (7” flange)
Engine:
Kubota V3307-DI-T Turbo
Engine Specs:
4 Cylinder, 3.3 Liter
Max Engine Power:
74.3HP at 2,600 RPM
Emission Regulation:
EPA Tier 3/Interim Tier 4
2”
Arbor size:
1” w/drivepin
Multiple ball bearings
in oil bath
Blade shaft drive:
10 V-belts - 2 power bands
Blade mounting:
Right or Left
Blade Coolant:
Dual multi-spray tubes
Drive speed:
0-250 feet/min
forward and reverse
Transmission:
Hydro pump powering
dual wheel motors
Air filter:
4 stage w/restriction indicator
Fuel capacity
9 gallons
CC7100 PRODUCTION WALK BEHIND SAW
SELF
PROPELLED
14”-42”
Turbo Charged Diesel
Production Walk
Behind Saw
Horsepower as
rated by the engine
manufacturer
Sawing Equipment
Blade not included
Features:
Benefits:
· Turbo charged diesel engine for longer life and
lower maintenance
· 16-3/4” cutting depth with 42” model
· Forward positioned motor for more weight on the
blade (where it’s needed) and less on the
operator
· Gear drive system
· Excellent for bridge deck and parapet sawing
· Comes standard with shaft tachometer
· Extra heavy duty reinforced single piece frame,
designed specifically for the Deutz engine
· 4-stage cyclone air filter
CC7100 SAWS
Model #
Engine Type
Part #
Cat #
Blade
Capacity
Uncrated/
List Price
CC7172-14
5800220
02321
14”
1,790/1,915
$29,268
CC7172-20
5800221
47703
20”
1,800/1,925
29,355
CC7172-26
5800222
02322
26”
1,810/1,935
29,656
CC7172-30
5800223
48513
30”
1,820/1,945
29,888
CC7172-36
5800224
02323
36”
1,830/1,955
30,111
CC7172-42
5800225
47494
42”
1,840/1,975
31,168
146
CC7100 OPTIONS
CC7100 Control Panel with drive lever, power raise/
lower buttons and gauges
4-1/2”
7-1/2”
10-1/2”
11-3/4”
14-3/4”
16-3/4”
1-3/4”
Arbor size:
1” w/drivepin
Blade shaft drive:
10 belt
Blade mounting:
Right or Left
Transmission:
Eaton Model 10
Drive speed:
0-200 feet/min
Air filter:
4 stage
Fuel capacity
9 gallons
Slip-on blade guard
Quick release rear wheels
Frame lift
Part #
Cat #
List Price
Catalytic Muffler Upgrade Only
6011309
95172
$1,738
Water Safety Switch
6010522
67821
139
6011032
02506
418
Spot Light
6010112
02427
154
Blade stacking kit - 4-1/2” flange
Parking Brake
6010227
02480
234
6010630A
23186
773
6010631A
23187
814
6010632A
16558
961
6011228
81191
349
Glow Plug
6010596
70748
176
6010950
20011
376
6010952
08213
558
6010954
19322
719
6010956
20456
889
6010958
13375
998
6010960
08216
1,127
CC7100 Dimensions:
A. Saw Height
63”
61”
126”
D. Handle Extension
24”
27-5/8”
37”
G. Frame Length
51”
H. Saw Width
43-1/4”
31”
24-1/2”
23-7/8”
22-1/2”
8” x 3” x 1”
10” x 3” x 1-1/4”
147
Sawing Equipment
INCLUDES:
Electric start
Hour meter
Description
CC7200 HIGH PRODUCTION WALK BEHIND SAW
SELF
PROPELLED
26”-60”
HIGH PRODUCTION
DEEP CUT SAW
Horsepower as
rated by the engine
manufacturer
Sawing Equipment
Features/Benefits:
· Jackshaft design for high torque, lower RPM
requirements for deep sawing with large diameter blades
· 26-1/2” cutting depth with 60” model
· Shaft tachometer on diesel models
· Extra heavy duty reinforced steel, single piece frame design
· Forward positioned motor puts weight on the blade where
it’s needed and off the operator
Blade not included
CC7200 SAWS
Model #
Engine Type
Part #
Cat #
CC7272-26
CC7272-30
CC7272-36
CC7272-42
CC7272-48
CC7272-54
CC7250E-10-26
CC7250E-10-30
CC7250E-10-36
CC7250E-10-42
CC7250E-10-48
CC7250E-10-54
CC7250E-10-54
CC7250E-10-60
50 HP Baldor Electric (460V)*
5800176
5800177
5800178
5800179
5800180
5800181
5800286
5800287
5800288
5800289
5800290
5800291A
5800291B
5800398
48521
48522
02308
02309
02310
02311
48528
48529
48530
48531
48532
04445
03512
26560
*Includes motor starter and switch box
148
Blade
Uncrated/
Capacity Crated Weight (lbs.)
26”
2,100/2,250
30”
2,110/2,260
36”
2,120/2,270
42”
2,140/2,290
48”
2,160/2,310
54”
2,175/2,325
26”
1,735/1,885
30”
1,745/1,895
36”
1,755/1,905
42”
1,765/1,925
48”
1,795/1,945
54”
1,810/1,960
54”
1,810/1,960
60”
1,860/2,010
List Price
$31,926
32,095
32,409
33,563
33,865
34,333
21,729
21,886
22,118
23,130
23,628
23,936
23,936
25,433
CC7200 OPTIONS
DESCRIPTION
PART #
CAT #
List Price
Catalytic Muffler Upgrade*
6011309
95172
$1,738
Water Safety Switch (Diesel Saw)
6010522
67821
139
Water Pump (Electric)
6011032
02506
418
Spot Light
6010112
02427
154
Blade stacking kit - 6” flange
6010630C
17000
773
6010631C
21357
814
6010632C
17592
961
6010227
02480
234
Soft Start Controller x
6010228
02481
4,842
Soft Start Controller Add On for 230/460 volt
6013197A
14350
3,723
Soft Start Controller Add On for 575 volt
6013197B
14351
3,723
Parking Brake
6011228
81191
349
Glow Plug (for Deutz engine)
6010596
70748
176
6010950
20011
376
6010952
08213
558
6010954
19322
719
6010956
20456
889
6010958
13375
998
6010960
08216
1,127
6010962
24618
1,259
6010964
99721
1,429
9-3/4”
11-3/4”
14-3/4”
16-3/4”
19-3/4”
22-3/4”
26-1/2”
1-3/4”
Self-aligning double
concave roller
Arbor size:
1” w/drivepin
Blade shaft drive:
10 belt primary,
20 belt secondary
Blade mounting:
Right or Left
Transmission:
Eaton Model 10
Drive speed:
0-200 feet/min
Air filter:
4 stage
Fuel capacity (Diesel)
9 gallons
High temperature shutoff
Amp meter w/warning light
Frame lift
149
CC7200 Dimensions:
A. Saw Height
63”
70”
135”
D. Handle Extension
24”
27-5/8”
37”
G. Frame Length
60”
H. Saw Width
43-1/4”
31”
24-1/2”
25-3/8”
28-1/2”
8” x 3” x 1”
10” x 3” x 1-1/4”
Sawing Equipment
INCLUDES:
Electric start
Hour meter
Slip-on blade guard
* For new saw orders only.
Use Part # 2703449 for upgrading existing saws.
x For electric saws only - factory installed
CC7874XL EZ RIDER JOINT CUTTING SAW
SELF
PROPELLED
14” - 20”
Highest Production
Joint Cutting
Easy Maneuverability
and Easy Operation!
Horsepower as
rated by the engine
manufacturer
Blade not included
Sawing Equipment
Upcut Sawing Keeps
Joints Clean
Features:
· Fast driving speed with precise and stable steering
· Upcut sawing
· Extra wide 5” adjustable wheels
· Adjustable seat and steering with vibration isolated seat
and foot rest
· 3 lights for night sawing
· Adjustable lowering speed
· Patented linear belt tensioner for precise blade
shaft alignment
· Large double row tapered roller bearing on the blade shaft
· Automatic engine overheat and low oil shut off
Benefits:
· Easy to use features for less operator error
· Perfect blade visibility
· Two independent water adjustments for joint cleaning
· Folding pointer for storage on the saw
· Enclosed belt drive for longer belt and pulley life
· Remote grease zerks for easy lubricating
· Inboard bearing support allows easy belt removal
CC7874XL EZ RIDER JOINT CUTTING SAW
Model #
Engine Type
Part #
Cat #
Blade
Uncrated/Crated
Capacity
Weight (lbs.)
List Price
CC7874XL-14
73 HP Deutz Turbo Diesel 5800819
29948
14”
1,900/2,050
$45,560
CC7874XL-20
73 HP Deutz Turbo Diesel 5800818
29674
20”
1,950/2,100
46,472
150
Upgraded, larger hydraulic oil tank
4”
7”
Engine:
Deutz 73 HP turbo charged diesel,
air cooled with electronic shutdown
2”
Roller bearing pillow blocks
Arbor size:
1” w/drivepin
Blade shaft drive:
(10) 3V belts (2 sets of 5)
Blade mounting:
Right side
Electric over hydraulic system
12 volt DC
Travel - forward & reverse:
Hydraulic driven rear wheel
Drive speed:
0-375 feet/min
Air filter:
Dual element with rotating
vane pre-cleaner
Depth stop:
Dual side
INCLUDES:
Front Sealed Wheel Bearings Tachometer
Fuel Gauge
Hour Meter
Water Safety Switch
Lifting Bale
CC7874XL OPTIONS
DESCRIPTION
PART #
CAT #
List Price
14” Blade Guard
6046030
08994
$324
20” Blade Guard
6047214
75074
600
WHY CUT EXPANSION JOINTS?
Concrete expands and contracts with
temperature and moisture changes...as the
temperature rises or the moisture content
of the concrete increases, expansion takes
place...as the temperature drops, the concrete
will contract. The provision to accommodate
movement at predetermined locations with
proper joint cuts, prevents the development
of stresses that could rupture the concrete.
Sawing Equipment
Saw Height
72”
Frame Width (Rear)
26-1/2”
Frame Length
80”
Saw Width
57”
Front Axle Center Length
39-7/8”
Wheel Base Length
48”
Frame Specifications
2” x 4” x 188 wall tubing
Wheel Dimensions (2 front, 1 rear)14” diameter x 5” wide
151
CC8000 RIDER SAW
SELF
PROPELLED
14”-54”
A Saw You Can Ride or Use
as a Power Pack!
Hydraulic Powered
Drive & Bladeshaft
Means No Belts!
Horsepower as
rated by the engine
manufacturer
Blade not
included
Features/Benefits:
Sawing Equipment
· 74 HP Deutz diesel with isolators to reduce vibration
· Multi application platform allows the saw to be used as
a hydraulic power pack
· Zero turn radius for precise turning control
· Hydraulic driven blade shaft delivers an infinite amount of
variable RPM’s with no horsepower loss
· Arm can be rotated to enter the cut up to a 10 degree angle
· No belts to tighten or replace
· Converts from a downcut to an upcut saw in less than a minute
which is great for joint widening or rehab work
· Arm-mounted blade raises and lower easily while engine and
operator remains level
· 22-3/4” Maximum Cutting Depth
CC8000 RIDER SAWS
Model #
Engine Type
Part #
Cat #
CC8072-14
CC8072-20
CC8072-26
CC8072-30
CC8072-36
CC8072-42
CC8072-48
CC8072-54
5800415
5800416
5800417
5800418
5800419
5800420
5800421
5800422
47632
48540
46819
48541
48542
48543
48544
47868
Blade
Capacity
14”
20”
26”
30”
36”
42”
48”
54”
Uncrated/Crated
List Price
Weight (lbs.)
2,620/2,870
$49,501
2,630/2,880
49,583
2,640/2,890
49,660
2,650/2,900
49,825
2,670/2,920
49,982
2,680/2,930
50,210
2,690/2,940
50,388
2,700/2,950
50,715
* Can be used as a power pack only with the option Part # 6040256 (Cat # 76796) at 30 GPM, 2,500 PSI
Saws without QQ hoses - add high pressure QD hose kit with above option - Part # 6040257 (Cat # 29775)
152
CC8000 OPTIONS
INCLUDES:
Electric Start
Tachometer
Adjustable Depth Stop
PART #
6010112
6040117
6040135
6040338
CAT #
02427
47869
50826
54214
List Price
$154
417
20,299
263
6010630C
17000
773
6010631C
21357
814
6010632C
17592
961
6010447
28701
295
6010950
6010952
6010954
6010956
6010958
6010960
6010962
6010964
20011
08213
19322
20456
13375
08216
24618
99721
376
558
719
889
998
1,127
1,259
1,429
CC-8072 RIDER SAW CUTTING ATTACHMENT
Hour Meter
Telescoping Front Pointer
Quick Disconnect Blade Flanges
Model/Description
Cat #
List Price
CC8072 Curb Cutting Saw 74HP DEUTZ
- 30” Guard
82607
$66,347
CC8000 Dimensions:
A. Saw Height
67-3/4”
82”
129-1/4”
D. Frame Width 45”
E. Frame Length
58”
F. Saw Width
64-5/8”
G. Front Axle Center Length
39-7/8”
31-5/8”
10” x 4” x 1-1/4”
12” x 6-1/2” x 1”
Wheel Base Length
47-1/2”
153
Sawing Equipment
3-3/4”
6-3/4”
9-3/4”
11-3/4”
14-3/4”
16-3/4”
19-3/4”
22-3/4”
2-1/2”
Precision ball
Blade shaft drive:
Hydraulic motor
Arbor size:
1” w/single drive pin
Blade mounting:
Right side
Hydraulic, solenoid
valve controlled
Transmission:
Variable displacement
hydraulic pump & motor
Air filter:
4 stage
Fuel capacity:
9 gallons
Hydraulic oil capacity:
17 gallons
DESCRIPTION
Spot Light
Water Pump Kit
Dust Collection System
Strobe Light Kit
Tiller Steering Option - connects
directly to the rear drive wheel
CURB CUTTER 2000
SELF
PROPELLED
36”
The Easiest Way to
Cut a Curb!
Horsepower as
rated by the engine
manufacturer
Sawing Equipment
Blade not included
Easy to Use Control Station
With All the Guages Needed to
Monitor Flow, RPM and More
Benefits:
Features:
· Precise diamond cutting means there is no damage to
adjacent curb structure or roadway
· Heavy duty but compact design means the Curb Cut
2000 easily fits on an existing flatbed trailer unlike other
curb cutters which require a dedicated truck
· Flush cuts parapet and barrier walls, garage door
openings and can perform articulated cutting
· Precision ride-on single operator machine that can
cut a 16 foot driveway opening in 15 min!
· 100 HP John Deere diesel engine
· Cuts driveway and ramp openings in all types of
existing curbs
CURB CUTTER 2000
Model #
Engine
Part #
Curb Cutter 2000 100 HP John Deere CS-2000-100
Cat #
Blade Capacity
82501
36”
154
Uncrated/Crated
List Price
Weight (lbs.)
5,100/5,800
$156,450
Driveway/Sidewalk
Sidewalk
ramp
Corners ground
Flush cut
Angle cut
Roadway
1
2
3
Once the location of the
new driveway/sidewalk
is determined, the Curb
Cutter 2000 cuts a flush
cut along the bottom of the
monolithically poured curb.
After the flush cut is completed,
angle cuts are made.
Once the cuts are finished,
the debris is broken away and
removed leaving a completed
driveway/sidewalk opening with
no damage to remaining curb
structure or pavement.
CURB CUTTER 2000 Specifications:
ENGINE
-100 HP John Deere water cooled diesel engine with electronic
safety shut down system
Fuel Tank Capacity:
28 gallons
Drive Speed:
0-200 feet/min
CURB CUTTER 2000 OPTIONS
Description
Part #
Cat #
List Price
Hydraulic grinder
CS-2000-HG
86911
$4,274
Curb saw trailer
CS-2000-T
87827
11,234
Sawing Equipment
HYDRAULICS
-75 gallon hydraulic oil tank capacity
-Blade pump - 50 GPM pressure flow compensation
-Closedloopgrounddrivepumpwithpiggybackgearpumpfor
cylinder functions
-5 bank control valve
-10 micron hydraulic filters
-High efficiency hydraulic heat exchanger
-Hydraulic flow meter and pressure gauge
BLADE
Maximum Blade Diameter:
36” flush cut
Maximum Plunge:
15”
Maximum Vertical:
10”
Maximum Right to Left Angle
15 degrees
Maximum Reverse Angle w/20” blade:
5 degrees
Arbor Diameter:
1”
Blade Tilt:
15-17 degrees
CONTROL PANEL
Tachometer, engine temperature meter, hour meter, volt meter, starter switch,
oil pressure gauge, murphy switches and strobe light
FEATURES
Mechanical parking brake, 6” diameter solid rubber wheels and water tank
OPTIONS
Stanley hydraulic pole grinder and night working lights
DIMENSIONS
Saw Length: 130”, Height: 87”, Width: 62”
155
CC110 High Powered Saws
36” - 72”
Deep Sawing
Made Easy
SELF
PROPELLED
Parts List # 1801463 (deep cut model)
1805083 (slab saw model)
Sawing Equipment
The Coolest and Cleanest Running
Diesel Saw Out There!
CC110-DC Features/Benefits:
CC110-SS Features/Benefits:
· Powerful 110 HP Cummins Diesel engine
· Charge air cooled engine - The intake air is 30 degrees
cooler than ambient air.
Cool air means power.
· Complete skid plate that protects the belt and blade
shaft bearings
· 2-1/2” diameter blade shaft and bearings
· Cleanest running diesel engine in any large walk
behind saw
· Maximum cutting depth of 32” with 72” blade
· Outboard bearing support
· 6 bolt blade collars with safety hub
· Powerful 110 HP Cummins Diesel engine
· 36” blade capacity
· 2” blade shaft blade
· Drilled and tapped blade shaft bearings and jack
shaft bearings
· Standard 12 volt powered 5th wheel for easy turning
· Improved filter system to keep fan and radiator clean
· Improved safety shielding
· Blade shaft bolt locks
· Parking brake standard
· Enhanced easy adjust jackshaft assembly
· Maximum cutting depth of 14-1/2”
CC110 HIGH POWERED SAWS
Blade
Uncrated/Crated
List Price
Capacity
Weight (lbs.)
Model #
Engine
Part #
Cat #
CC-110-SS
110 HP Cummins Diesel
5801110
37262
36”
2250/2,650
$59,099
CC-110D-DC
110 HP Cummins Diesel
CC-110D-DC
18603
72”
2,550/2,800
60,099
156
CC110-DC Specifications:
14-1/2”
17-1/2”
20-1/2”
23-1/2”
26-1/2”
29-1/2”
32”
Engine Manufacturer:Cummins QSB3.3 Intrim Tier IV
Maximum Horsepower:
110HP at 2,400 RPM
Blade shaft diameter:2-1/2”
Blade shaft bearings: Self-aligning double concave roller
Blade shaft drive:
5-5VX belts
Arbor size:
1” w/6 bolts
Blade mounting:
Right and left side
Blade raise & lower: Electro-hydraulic pump
Transmission:
Eaton
Fuel capacity:
9 gallons
Air Filter:
2-stage
Gauges
Cantrax engine control
INCLUDES:
Electric Start
Low Oil Alert
Tachometer
Blade Shaft Wrench
CC110-SS Specifications:
11-1/2”
14-1/2”
Engine Manufacturer:Cummins QSB3.3 Intrim Tier IV
Maximum Horsepower:
110HP at 2,400 RPM
Blade shaft diameter:2”
Blade shaft bearings: Self-aligning double roller
Blade shaft drive:
5-5VX belts
Arbor size:
1” ‘Louie arbor’
Blade mounting:
Right and left side
Blade raise & lower: Electro-hydraulic pump
Transmission:
Eaton
Fuel capacity:
9 gallons
Air Filter:
2-stage
Gauges
Cantrax engine control
INCLUDES:
Electric Start
Low Oil Alert
Tachometer
Blade Shaft Wrench
High Temperature Shut-Off
Hour Meter
Amp Meter Warning Light
Fifth wheel
CC110-SS SLAB SAW OPTIONS
CC110-DC DEEP CUT OPTIONS
Description
Part #
Cat #
List Price
48” blade guard
CC-DC-SS-48
29773
$1,264
54” blade guard
CC-DC-SS-54
75912
1,374
60” blade guard
CC-DC-SS-60
28401
1,418
66” blade guard
CC-DC-SS-66
79825
1,629
72” blade guard
CC-DC-SS-72
28404
1,662
High Temperature Shut-Off
Hour Meter
Amp Meter Warning Light
Fifth wheel
Description
Part #
Cat #
List Price
Light bar kit
6010112
02427
$154
30” blade guard
6090371
96634
1,193
36” blade guard
6090372
89384
1,293
CC110-DC Dimensions:
A. Saw Height
E. Frame Width F. Saw Width
G. Frame Length
Wheel Base Length
Crated Saw Dimensions 157
74”
30”
30”
80”
31-5/8”
10” x 3” x 1-1/4”
12” x 3” x 1”
47-1/2”
80” L x 44” W x 70” H
Sawing Equipment
CC110-SS Dimensions:
A. Saw Height
71”
74”
126”
D. Handle Extension Length
24”
E. Frame Width (rear)
30”
F. Frame Width (front)
36”
G. Frame Length
53”
H. Saw Width
39”
24
26-1/2”
24”
L. Blade Shaft Height
20”
SAW ACCESSORIES
Heavy Duty Steel Frames
The strongest frame on the market prevents frame ‘tweaking’ from happening. This is sometimes caused when
a blade is pinched in the cut and the saw could raise and then slam back down on the concrete.
Sawing Equipment
Four Stage Air Cleaner
The four stage dry air cleaner gives your
engine the best possible protection and
ensures long service life. Includes an inner
filter to safeguard your engine in the event
the outer filter is torn or damaged.
Water Safety Switch
Automatically shuts off engine when water flow
is not sufficient for wet cutting
For gas saws
Part # 6047932, Cat # 47451 List Price:$139
For diesel saws
Part # 6010522, Cat # 67821 List Price:$139
Tapered Mounted Blade Guards
Most saws have tapered blade guards that make it easy to access
the blade and flange. The guards have a multi-spray water system
that ensures maximum water coverage
Electric Diaphragm
Water Pump
Maintains constant water
pressure when jobsite water
pressure is poor.
158
Shaft Tachometer
Gives an accurate readout of the bladeshaft RPM.
for CC3535 - Part # 6011434, Cat # 49732 List Price:$501
SAW ACCESSORIES
Flange Bolt Lock Kit
Eaton Transmission
Ensures secure blade mounting.
Add a flange bolt lock for added safety:
Part # 6011702, Cat # 16252
List Price:$10.63
All self propelled saws use an Eaton
Transmission that has an increased
pitch gear tooth for longer gear life and
gear drive to rear axle.
Parking Brake
Large saws can be fit with a parking
brake for holding the saw in place on
inclines or any situation where the saw
should not roll or move.
Adjustable Handle Bars
Spotlight Kit
Allows you to saw at night
CC3500 to CC8000 saws
Part # 6010112, Cat # 02427
List Price: $154
Reposition the handles for extra leverage when
sawing with larger diameter blades or for easier
maneuverability when positioning the saw.
Available for:
CC3500, CC3700, CC6500, CC7100
and CC7200 series of walk behind saws
Part # 6011228, Cat # 81191
List Price: $349
Propane powered saws are
ideal where electric power is not
accessible or gas/diesel fumes are
not allowed. Conversion kits are
bi-fuel, allowing the saw to be easily
switched from propane to gasoline
or gasoline to propane. Saws can
also be fit for propane only.
Magnetic Spot Light
Provides added visibility for night
sawing or sawing that is easy to install.
Part # 6011170, Cat # 47551
List Price:$145
PROPANE CONVERSION KITS
Description
Kit Part #
CC1200 and CC1300 with 8HP Honda engine
6040321
CC1200 and CC1300 with 11 HP Honda engine
6040322
CC1800 with 18 HP Honda engine
6040323
CC2500 with 18 HP Honda engine
6040324
CC2500 with 20.5 HP Honda engine
6040328
CC3500 with 35HP Briggs Vanguard engine
6040564
159
Cat #
10155
10156
10157
10158
42101
25338
List Price
$2,554
2,554
2,725
2,687
2,836
2,982
Sawing Equipment
Propane Conversion Kits
CG-1 & CG-2 WALK BEHIND MINI GROOVERS/GRINDERS
SELF
PROPELLED
12” Diameter
Grinding Head
Horsepower as
rated by the engine
manufacturer
Easy to Use,
Compact Grooving
and Grinding
Machines
Sawing Equipment
Parts List: 1801244
Blades not included
Features:
Benefits:
· Available with 4 power choices
· Useful for creating textured anti-slip areas for
improved traction
· Compact & maneuverable in hard to reach areas
· Power raise and lower system
· An affordable alternative to large grinding
machines
· Heavy duty construction to handle big jobs
CG-1 & CG-2 MINI-GROOVERS
Model #
Engine/Capacity
Grinding Head
Capacity (Width)
Part #
Cat #
Uncrated/Crated
Weight (lbs)
List Price
CG-1G24
20.5 HP Honda GX760
10”
5803003
08005
800/860
$19,354
CG-1E15
15 HP Baldor Electric
10”
5803005
08009
780/840
19,803
CG-2E30
30 HP Lincoln Electric
16”
5803007
08985
1,525/1,605
27,005
CG-2D49
49 HP Deutz Diesel
16”
5803006
08771
1,600/1,680
31,505
160
Mini- Groover control panel with power
raise and lower controls, drive control
and gauges
CG-2 with a powerful
30 HP Lincoln electric motor
Mini-Groover Dimensions
Diagram #
CG-1
CG-2
A
38-7/8”
49-3/8”
B
42”
65-3/4”
C
88”
120-1/2”
D
18”
38”
E
24-3/8”
26-3/4”
F
27”
64-1/4”
G
38”
34”
H
27”
13-1/2”
I
22”
29-3/8”
J
22”
21-1/4
161
Sawing Equipment
Uses 12” diameter blades on a 10” or 16” grinding head with
specifications that can be custom fit to your application
CC1700 CRACK CHASING SAWS
6”
CC1714R-6
Part#
Cat#
Description
CC1722R-6
List Price
Part#
Sawing Equipment
5802266 33799 14 HP Robin-Subaru gas engine $7,061
Cat#
Description
5802267 27712 22 HP Robin-Subaru gas engine $9,450
Features/Benefits
· Extremely operator friendly
· Center mounted blade makes following random cracks easy
and accurate
· Safer to operate than carbide cutter units
· Eliminates percussive fractures often caused by carbide cutters
· Depth of cut indicator directly in the operator’s line of sight
minimizes cutting depth and saves on sealant costs
· Produces a perfect sealant reservoir for maximum pavement life
· Push button electric depth control on the handle
· Electric raise and lower
Crack Saw Diamond Blades for Extra Smooth Routing
of Even the Most Erratic Random Cracks
Random Crack Saw Blades are
used to prepare random cracks for
resealing with joint sealant material.
Available in
and Premium Black (P)
Crack Saw
Blade Sizes
6” x .250
6” x .375
6” x .500
Additional sizes available
upon request.
Random Crack Saw Blade Specifications
Aggregate Type
Hard/Medium Hard
Soft
Use these crack saws and
blades for routing random
cracks in concrete or asphalt
List Price
Asphalt
A64DW
A606DW
Cured Concrete
C56
C60
See page 22 for Crack Saw Blade pricing.
162
Rear blade location.
Down-cut as viewed by the operator.
CC1714R-6
CC1722R-6
Materials cut
Cured concrete & asphalt
Cured concrete & asphalt
Accepted Blade Width
.250”, .375”, .500”, .750”
.250”, .375”, .500”, .750”
Blade Rotation
Down-cut
Down-cut
Blade Shaft Speed
4600 RPM
4600 RPM
Max Cutting Depth
1-1/2”
1-1/2”
Dimensions
43” x 24” x 50” (handle up)
62” x 24” x 29” (handle down)
46” x 31” x 53” (handle up)
64” x 31” x 38” (handle down)
Engine
14 HP Robin-Subaru Model EH-41,
air cooled, 4 cycle, single slant
cylinder, overhead valve gasoline
22 HP Robin-Subaru Model EH-65,
air cooled, 4 cycle, V-Twin cylinder,
overhead valve gasoline
Starting System
Manual recoil starter/electric start with
automatic mechanical compression
release and zero kick back
Electric start with automatic
mechanical compression release and
zero kick back
Air Filter
Dual element cleaner; cyclone filter
Heavy duty
Oil System
Oil alert with automatic shutdown
sensor
Oil alert with automatic shutdown
sensor
Blade Raise/Lower System
Electric actuated with switch on
handle bar
Electric actuated with switch on handle
bar
Handle
Six position adjustable
Six position adjustable
Wheels
Hard poly
Hard poly (optional pneumatic tires Part # 6040737 / Cat#36466 $299
Shipping Weight
270 lbs.
470 lbs.
List Price
$7,061
$9,450
Approximate Existing
Finished
Crack Width
Routed Width
163
1/4”
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
7/8”
1”
1-1/8”
Sawing Equipment
Model #
CC80 & CC100 SINGLE HEAD FLOOR GRINDERS
Grinds, Cleans,
Levels and Smooths
Bumps and Uneven
Areas Quickly
8”, 10”, 12”
8” Capacity = 8” diameter grinding head
See Page 9 for Diamond Grinding Heads
CC100 Parts List: 1800502
CC175
CC113
CC114
Features:
Benefits:
· Remote throttle
· 2” dust port opening
· Single grease point
· Steel box frame
· Adjustable handles
· Lifting handles
· Adjustable wheel location for added grinding strength
· Variety of power options: gas, electric, hydraulic or propane fitting
· Single head for fast, aggressive grinding
· Greasing points are easily accessible
· Electric models include starter box
CC80 & CC100 SINGLE HEAD FLOOR GRINDERS
Sawing Equipment
Model #
CC82E1-8
CC102E1
CC113H
CC175E1
CC175E3
CC175E3
CC175E3
CC114HY
Engine/Motor Type
Part #
Cat #
Head
Capacity
Uncrated/
Crated
List Price
Weight (lbs.)
2HP - 1PH - *115V or 230V Baldor Electric
5800989PKG 15072
8”
110/130
2 HP - 1PH - *115V or 230V Baldor Electric
5800539
48551
10”/12”
370/420
10.2 HP Honda GXV390 Gas
5800527
47385
10”/12”
370/420
7.5 HP - 1PH - 230V Baldor Electric
5800529
48552
10”/12”
370/420
5800530A
95042
10”/12”
370/420
5800530B
94981
10”/12”
370/420
5800530C
98244
10”/12”
370/420
14 HP Danfoss Hydraulic - 2500 PSI, 12 GPM
5800532
48553
10”/12”
220/270
NOTE: Each Floor Grinder comes with on 65lb weight ballast (*excludes Models # CC82E1-8 & CC102E1)
Optional Second weight available
2501047
47017
Standard 115V
Power!
$2,760
3,130
3,709
4,745
4,129
4,129
4,129
4,203
CC100
Dimensions:
Length = 53” w/handle
(41” w/o handle)
Height = 40” w/handle
(31” w/o handle)
Width = 28”
$263
CC80 Low Profile Floor Grinder
· Remove paint, epoxy and rough spots
· 2800 rpm grinding head speed
· 2 HP Baldor - 1PH, 115V, 16 amp motor
· Includes 50ft, 12 gauge extension cord
Propane kit for
CC113H only
Part # 6040322
List Price: $2,554
CC80
Dimensions:
Updated slurry skirt that
keeps the machine
on the grinding surface
Low profile for hard to
reach areas
164
Adjustable rear axle and
heavy duty steel frame
(41” w/o handle)
(31” w/o handle)
Width = 28”
CC200 DUAL HEAD FLOOR GRINDERS
10”, 12”
Accommodates Both
Diamond Grinding Heads
and Grinding Blocks
CC200
Dimensions:
Horsepower as
rated by the engine
manufacturer
(41” w/o handle)
(31” w/o handle)
Width = 28”
Electric Models
Include Starter Box
Features:
· Remote throttle
· 2” dust port opening
· 1/4” thick steel box frame
· Multiple grease point
· Water connection
· Multiple lifting handles and single lifting point
Benefits:
· Dual head allows large 24” grinding area with two 12” grinding heads
· 4 rear axle positions and swivel axle
· Matches the height of the grinding head being used and allows for
rapid change in weight distribution during grinding or transport
· Can use diamond grinding head, carbide blocks or grinding stones
Propane kit for
CC213H only
Part # 6040322
List Price: $2,554
CC 200 DUAL HEAD FLOOR GRINDERS
Model #
Part #
Cat #
List Price
5,673
4,533
6,580
6,041
6,041
6,167
$263
Floor Grinding Accessories
See Pages 24-25 for More Information
Carbide Cutting Block
Aluminum discs used with 3 grinding blocks For use with two discs on dual head models only.
Also works with competition style floor grinders.
Diamond Grinding Block
NOTE: Use diamond grinding blocks on dual head models only.
165
10” or 12”
Diamond Grinding Heads
Sawing Equipment
CC213H
CC202E1
CC275E1
CC275E1
CC275E3
CC214HY
Head
Uncrated/Crated
Capacity
Weight (lbs.)
10.2 HP Honda GXV390
5800537
47799
(2)10”/(2)12”
340/390
2 HP - 1 PH, *115V or 230V Baldor Electric
5800533
48555
(2)10”/(2)12”
350/400
7.5 HP - 1 PH, 230 Volt Baldor Electric
5800535
48556
(2)10”/(2)12”
400/450
5800536A
11192
(2)10”/(2)12”
400/450
5800536B
94965
(2)10”/(2)12”
400/450
14 HP Hydraulic - 2500 PSI, 12 GPM
5800538
48558
(2)10”/(2)12”
240/290
NOTE: Each Floor Grinder comes with on 65lb weight ballast (*excludes Model # CC202E1)
Optional Second weight available
2501047
47017
Engine/Motor Type
DS3011 PLANETARY HAND POLISHER
The Industry Standard in Concrete Counter Top Polishing
Parts List: 1801003
Sawing Equipment
12” Grinding Width
Features:
Benefits:
·Uses three 5” diamond polishing pads and/
or diamond grinding discs
·Planetary, gear driven system
·Powered by a heavy duty FEIN® variable
speed motor
·Center coolant feed
·Precision bearings
·Heavy duty handles and body
·Built-in vacuum port
·Rugged, hand-operated 12” platform that grinds,
hones and polishes concrete surfaces
·Operates wet or dry (with optional dust cowl)
·12” platform turns at a lower rate than the higher
rotational speed (>2000rpm) of the 5” platens
·The RPM provides the optimal speed for
diamond polishing, producing a perfect finish 5
times faster than a single head polisher
One of three 5” grinding platens
(Velcro® surface)
Great for Counter and
Table Tops
DS3011 SPECIFICATIONS
Part #
5801328
Cat #
32947
Power
115V, 60Hz
Current
11 amp, uses 20amp breaker
Driver Speed
2500 RPM
Uncrated Weight
30 lbs.
Crated Weight
37 lbs.
Slurry Skirt
Included
Coolant Feed
Included
List Price
$2,733
See Page 49 or 169 for Diamond Polishing Discs and Pads
166
DS301X HEAVY DUTY PLANETARY HAND POLISHER
More Power Means Greater Production!
See Page 49 or 169
for Diamond Polishing
Discs and Pads
Parts List: 1801066
Benefits:
·Uses three 5” diamond polishing pads or discs
·Planetary, gear-driven tool
·Operates wet or dry (with optional dust cowl)
·Powered by a heavy duty Fein motor
·Center coolant feed
·Precision dual bearings
·Built-in vacuum port for dry operation
·Extra heavy duty version of the DS301X
·Rugged, hand-operated 12” platform that grinds, hones
and polishes concrete countertops, floors and edges
·The RPM provides the optimal speed for diamond
polishing, producing a perfect finish 5 times faster than
a single head polisher
DS301X SPECIFICATIONS
Part #
5800981
Cat #
62879
Power
110V, 60Hz
Current
15 amps
Ideal Speed
3,000 RPM
Weight
40 lbs.
Shipping Weight
45 lbs.
Slurry Skirt
Included
Coolant Feed
Included
List Price
$3,083
Hand Polishing Tips
• Attach diamond pads in center of
each platen.
• Operate DS3011 or DS301X at
highest speeds (3 to 6 on variable
speed control knob).
• Move with a back and forth, side to
side motion to be sure you cover
complete surface.
• Overlap passes about 2” to 3”.
• With metal bond 50/60 grit grinding
discs, the DS3011 will remove
approximately 1/4” of concrete in
60-90 seconds, exposing aggregate.
• Move polisher across surface faster
for light exposure (sand finish)
167
Create mirror-like finishes with the
7-step polishing process using our
diamond discs and polishing pads
Sawing Equipment
Features:
DS175 PLANETARY HAND POLISHER
Designed for Getting
Into Tight Spots
Polishes at 3,000 RPM
7” Grinding Width
Great for Countertops
Parts List: 1801002
Sawing Equipment
See Page 49 or 169
for Diamond Polishing
Discs and Pads
Features:
Benefits:
· Uses three 3” diamond polishing pads and
diamond grinding discs
· Planetary, gear driven system
· Driven by a variable speed Makita power
unit operating at 2,500 to 4,700 RPM
· Center coolant feed
· Precision bearings
· Grinds, hones, polishes and cleans steps,
counter tops, floor edges and hard to
reach areas.
· Scratch removal, surface restoration or
preparation is fast, easy and perfectly flat
· System may be used wet with a slurry skirt
(use a GFCI) or dry using the vacuum port
that is provided
DS175 SPECIFICATIONS
Part #
5800977
Cat #
47008
Power
115 volt/60 Hz
Driver Speed
Variable 2,500 to 4,700 RPM
Uncrated Weight
13 lbs.
Crated Weight
20 lbs.
Slurry Skirt
Included
Coolant Feed
Included
Tool Support Assembly
Included
List Price
$1,426
168
POLISHING PADS
Wet & Dry Pads for Polishing Concrete
Diamond Grinding Discs
Efficiently grind all types of
concrete, masonry, block and
stone.
Wet Resin Polishing Pads
Combine the benefits of resin
and its ultra smooth finish
with the longevity of diamonds
Single Diamond Discs and Resin Pads
Dry Resin Polishing Pads
Individual pads that replace single pads.
Due to the wearing of the pads, replacing all pads at the
same time is recommended.
Produce a mirror finish quickly
with finer diamond grits
3” Resin Polishing Pads - For DS175 Hand Machine Only
STEP #
DESCRIPTION
PART #
CAT #
FINISH
List Price
1
2
3
4
5
6
7
AS-DPC30053PK
AS-DPC30103PK
AS-DPC30203PK
AS-DPC30403PK
AS-DPC30803PK
AS-DPC31503PK
AS-DPC33003PK
47387
47394
47446
47458
47459
47397
47408
Heavy Material Removal
Fine Honing
Beginning Polish
Gloss
Mirror Finish
$150
150
150
150
150
150
150
STEP #
DESCRIPTION - BOND
PART #
CAT #
FINISH
List Price
CGST56SP3PK
CGST512SP3PK
CGST512SP3PK
CGST512SP3PK
CGST512SP3PK
CGST512SP3PK
AS-DPC50503PK
AS-DPC50103PK
AS-DPC50203PK
AS-DPC50403PK
AS-DPC50803PK
AS-DPC51503PK
62886
57162
60646
47077
47082
60652
47366
47374
47375
47379
47380
47384
Hard Epoxy Grinding (25/30 grit)
X-Tra Heavy Removal (25/30 grit)
Heavy Removal (40/50 grit)
Medium Removal (50/60 grit)
Fine Grinding (80/100 grit)
X-Tra Fine Grinding (140/170 grit)
Fine Honing
Satin Finish
Polish Gloss
Near Mirror Finish
$459
636
636
636
636
636
250
250
250
250
172
172
5” Diamond Discs & Resin Polishing Pads
1
2
3
4
5
6
7
Rubber Velcro Backup Pads- SINGLE
DESCRIPTION
PART #
CAT #
List Price
3” backup pad
BP-DT358
63228
$53
4” backup pad
BP-DT458
63246
55
5” backup pad
BP-DT558
63247
75
SINGLE 5” Diamond Grinding Discs
DESCRIPTION
List
CAT #
Price
DESCRIPTION
for STEP #1 OPTIONS
SINGLE 5” Resin Polishing Pads
List
CAT #
Price
DESCRIPTION
CAT #
List
Price
$83
50369
$50
5” Wet 25/30 Grit Disc 6 seg
58179
$153
50380
50370
50
51362
212
50376
83
50371
50
55547
212
50377
83
50372
50
49593
212
50378
83
50373
50
56687
212
50381
57
60038
212
50382
57
50374
50
50375
50
169
Sawing Equipment
Rubber backup
adapters for
polishing
pads - used on
5/8-11 threaded
spindles
CC1600 WALL SAW SYSTEMS
The Versatile Wall Saw That
Delivers Dependable, Full
Cutting Capability
24” to 60”
Parts List: 1800714
Sawing Equipment
Features/Benefits:
· Solid design and construction
· Three piece body for economical body repair
· Flush and angle cutting capability
· Available with 3.8 cubic inch or 5.2 cubic inch motor
· Saw comes standard with flush cut and complete tool kit
· Maximum flow and pressure: Max 30 GPM - Max 3000 psi
CC1600 WALL SAWS
DESCRIPTION
PART #
CAT #
List Price
CC1600 - 3.8PA Auto Travel Wall Saw Package *
with tracks, 36” guard & aluminum track feet (LY style)
5800933
79609
$21,034
CC1600 - 5.2PA Auto Travel Wall Saw Package*
with tracks, 36” guard & aluminum track feet (LY style)
5800934
81683
21,150
CC1600 - 3.8PS Auto Travel Wall Saw Package*
with stiffened track, 36” guard & steel track feet
5800931
78128
21,294
CC1600 - 5.2PS Auto Travel Wall Saw Package*
with stiffened track, 36” guard & steel track feet
5800932
78495
21,408
CC1600 High Cycle Wall Saw Package with 400V/400Hz 2400 rpm
WEKA Motor, tracks, 36” guard, track stiffeners and aluminum track feet
5800897
50469
26,021
*Packages include: wall saw head, blade guard, 90” track, 51” track, 4 track feet and tool kit.
170
CC1600 High Cycle
· Rugged and dependable
· Available in 400V, 400Hz
· 25HP Weka water cooled
high cycle motor
· Auto feed keeps
operator away from
machine for safer
operation
· System can be adapted to
an existing wall saw
CC1600 WALL SAW HEADS & MOTORS
DESCRIPTION
PART #
CAT #
List Price
CC1600 - 3.8 Manual Travel Wall Saw Head with motor and tool kit
5800925
85207
$14,192
CC1600 - 3.8 Auto Travel Wall Saw Head with motor and tool kit
5800921
78012
16,657
CC1600 - 5.2 Auto Travel Wall Saw Head with motor and tool kit
5800922
78416
16,772
Cross 3.8 cubic inch hydraulic motor
2600375
83144
865
Cross 5.2 cubic inch hydraulic motor
CC1600E Wall Saw Head with electric feed and travel motors
and Hi-Cycle Motor Adaptor
* Inverter required for CC1600E Hi-Cycle Electric Wall Saw 25 HP
460V/400Hz output with autofeed (includes cart).
2600092
52158
1,221
5800660
85208
19,545
5800971
20240
25,427
CC1600 WALL SAW TRACK
CC1600 TRACK STIFFENER
DESCRIPTION
PART #
CAT #
SHIP WT. List Price
40” track without stiffener *
6050166
48574
17 lbs.
6050167
47639
6050168
PART #
CAT #
$1,435
40” stiffener only
6050191
48579
15 lbs.
$109
23
1,810
6050192
48580
20
37
2,565
147
46856
6050193
48581
33
218
47523
50
3,472
6050169
6050194
48582
44
368
6050197
72750
100
4,200
40” track with stiffener **
6050161
48575
29
1,547
6050162
48576
37
1,961
6050163
48577
37
2,793
6050164
48578
82
* Use with standard aluminum track foot - Part # 4400106 – See below
** Use with steel track foot - Part # 6050130 – See below
SHIP WT. List Price
Sawing Equipment
DESCRIPTION
3,773
CC1600 TRACK FOOT SYSTEM & TRACK FEET
DESCRIPTION
PART #
CAT #
New Angle Track Foot Kit
Can go from 0 to 45 degrees.
May be used with stiffener or
mount directly to track.
SHIP WT. List Price
6050212
10024
16 lbs.
$469
Steel track foot for stiffened track
6050130
48583
16
190
Stair track foot *
6050150
48585
16
226
Standard aluminum track foot
4400106
01942
8
164
CC1600 OPTIONAL WALL SAW CARTS
* Requires stiffened track
DESCRIPTION
CAT #
SHIP WT.
List Price
Cart for CC1600 Wall Saw 5800972 31060
140 lbs.
$1,716
171
PART #
CC1600 WALL SAW BLADE GUARDS
Standard One and Two Piece, 2” Wide
s
r Tube
ate
With W
Two-Piece Blade Guards
With Water Tubes
Two-Piece Blade Guards
Without Water Tubes
BLADE
CAPACITY
24”
30”
36”
42”
48”
54”
60”
66”
72”
TWO PIECE
TWO PIECE
LIST PRICE
GUARD PART # GUARD CAT #
6047038
6047039
6047040
6047041
6047042
6047043
6049013
6049011
6049009
48586
48587
47640
48588
48589
48590
83259
86957
28406
$597
706
856
1,014
1,204
1,300
1,494
1,659
1,891
BLADE
CAPACITY
2-PIECE
GUARD PART #
2-PIECE
GUARD CAT #
LIST PRICE
24”
30”
36”
42”
48”
54”
60”
66”
72”
6047000
6047003
6047006
6047009
6047012
6047015
6049014
6049012
6049010
02587
02589
02592
02595
02598
02600
64690
28407
09081
$803
912
1,089
1,274
1,487
1,607
1,718
1,883
2,115
Designed for the CC1600 and LY360-35H wall saws with water
directed through blade guard (instead of the arm).
Sawing Equipment
Designed for CC1600 Wall Saw.
es
er Tub
at
With W
One-Piece Blade Guards
Without Water Tubes
BLADE
CAPACITY
ONE PIECE
GUARD PART #
24”
30”
36”
42”
48”
54”
60”
66”
72”
CC-24-BG-F
CC-30-BG-F
CC-36-BG-F
CC-42-BG-F
CC-48-BG-F
CC-54-BG-F
CC-60-BG-F
CC-66-BG-F
CC-72-BG-F
One-Piece Blade Guards
With Water Tubes
ONE PIECE
LIST PRICE
GUARD CAT #
80976
82413
80977
83246
85433
85429
85430
81941
85431
$519
554
638
720
846
1,093
1,175
1,220
1,240
Designed for CC1600 and LY360 wall saws.
BLADE
CAPACITY
ONE PIECE
GUARD PART #
ONE PIECE
GUARD CAT #
LIST PRICE
24”
30”
36”
42”
48”
54”
60”
66”
72”
6048978
6048979
6048980
6048981
6048982
6048983
6048984
6048985
6048986
63690
63692
63693
63705
63711
63729
63731
63773
63777
$502
543
627
837
992
1,054
1,294
1,335
1,357
172
CC1600 WALL SAW BLADE GUARDS
Flush Cut One and Two Piece, 1” Wide
Wit
hW
Two-Piece Flush Cut Blade Guards
Without Water Tubes
ate
r Tu
bes
Two-Piece Flush Cut Blade Guards
With Water Tubes
BLADE
CAPACITY
PART #
CAT #
LIST PRICE
BLADE
CAPACITY
PART #
CAT #
LIST PRICE
24”
30”
36”
42”
48”
54”
6047050
6047051
6047052
6047053
6047054
6047055
84081
82128
80042
82127
84082
83770
$421
520
627
770
910
1,158
24”
30”
36”
42”
48”
54”
6047020
6047021
6047022
6047023
6047024
6047025
48595
46889
47568
02602
47521
02603
$601
698
806
947
1,089
1,336
Designed for CC1600 Wall Saw.
Designed for the CC1600 and LY360-35H wall saws with water
directed through blade guard (instead of the arm).
Wi
th
ter
Tu
be
s
One-Piece Flush Cut Blade Guards
With Water Tubes*
BLADE
CAPACITY
PART #
CAT #
LIST PRICE
BLADE
CAPACITY
PART #
CAT #
LIST PRICE
24”
30”
36”
42”
48”
54”
CC-24-FL-BG
CC-30-FL-BG
CC-36-FL-BG
CC-42-FL-BG
CC-48-FL-BG
CC-54-FL-BG
85432
81579
81785
81580
39710
38619
$399
419
488
617
910
1,082
24”
30”
36”
42”
48”
54”
6048987
6048988
6048989
6048990
6048991
6048992
63673
63675
63677
63680
63686
63687
$453
527
594
774
792
797
* Designed for CC1600 Wall Saw.
173
Sawing Equipment
one-Piece Flush Cut Blade Guards
WithOUT Water Tubes
Wa
HYDROSTRESS® WALL SAW SYSTEMS
Up to 86”
·Available with Hydrostress track
or runs on competitor tracks
·Fully automatic
·Quick release blade flange
·Gear drive available
FZ
DZ
Sawing Equipment
HYDROSTRESS WALL SAW PACKAGES
DESCRIPTION
PACKAGE CONTENTS
FZ-2ST Hydraulic
Wall Saw Package
Hydraulic Wall Saw Head, (4) Aluminum Track Feet, (1) 86”
Aluminum Track, (1) 43” Aluminum Track, 40” Blade Guard and Tool Kit
5800217
02320
$25,691
FZ-CC-2ST Hydraulic
Wall Saw Package
Hydraulic Wall Saw Head, 40” Blade Guard and Tool Kit
5800916
77179
19,624
FZ-4S Hydraulic
Wall Saw Package
5802227
47704
29,565
WZ Hydraulic
Wall Saw Package
5802249
30699
36,215
WX-15 Hi-Cycle Electric
Wall Saw Package
Electric Wall Saw Head, (4) Aluminum Track Feet, (1) 86”
5802251
52788
63,551
DZ-2S Wall Saw System
with PPH25 Power Pack
Hydraulic Wall Saw Head, PPH20** Power Pack, (4) Track Feet, (1) 86”
5801208
14375
43,822
PPH40RR Power Pack
PPH40RR 575 Volt with 12 gpm stage
5802257
12171
63,087
PPH40RR Power Pack
PPH40RR 460 Volt with 12 gpm stage
5802256
06685
63,087
HYDROSTRESS WALL SAW MOTORS AND ACCESSORIES
ITEM
BS-2 Remote Control
Hydraulic Motor 30CC/1.8 cu. inch
DESCRIPTION
PART #
Remote Control Unit for Hydrostress
wall saws with single pump input
Without case drain for maximum
48” blade diameter
With case drain for maximum
174
CAT # List Price
5800112
48601
$6,682
3400144
01461
1,577
3400275
51859
3,052
3400377
01552
2,970
3400247
47989
3,170
3400889
83372
3,313
PPH-40
HYDROSTRESS® WALL SAW GUARDS & TRACK
HYDROSTRESS BLADE GUARDS
DESCRIPTION
32” Blade Guard Standard (3 piece)
40” Blade Guard Flush (3 piece)
48” Blade Guard Standard (3 piece)
56” Blade Guard Combo (2 piece) *
Holder for 2-piece blade guard (hook)
Holder for 2-piece blade guard (screw)
PART #
3401040
3402552
3402553
3401979
3400102
3400810
3400746
3400183
CAT #
80649
80930
30573
78577
01448
66558
47988
01475
List Price
$3,292
5,948
6,555
3,271
4,128
5,169
1,013
547
* Indicates blade guards that require one of the following blade guard holders:
Part # 3400183 or Part # 3400746
HYDROSTRESS TRACK
DESCRIPTION
PART #
CAT #
List Price
43” Aluminum/Steel for FZ, DZ Saws
3402051
67409
$1,572
86” Aluminum/Steel for FZ, DZ Saws
3402050
67408
3,154
43” Steel for FZ, DZ Saws
2500304
00373
2,595
86” Steel for FZ, DZ Saws
2500303
00372
4,581
Track Connector *
3402067
70393
399
* Locks two tracks (2500304 and 2500303 or 3402050 and 3402051) together.
HYDROSTRESS TRACK FEET
DESCRIPTION
PART #
CAT #
List Price
Aluminum Flat Style
for Aluminum Track
3402053
67407
$404
Standard Steel for Steel Track
3400480
47702
264
* Bar and chain sold separately.
See page 198-199
DESCRIPTION
PART #
CAT #
List Price
CSF50 Corner Cut Chain Saw for
Hydrostress Track* (20”)
5801041
14423
$20,913
Corner Cut Chain Saw for LY Track *
5800908
69393
14,684
· Carriage runs on Hydrostress and competitor style tracks
· Makes a perfect flush cut
· Reduces chain wear to half of hand held chain saws
· Less operator fatigue and safer than hand held chain saws
· Quick disconnect power head
175
Sawing Equipment
HYDROSTRESS CORNER CUT CHAIN SAWS
HYDROSTRESS® WIRE SAW SYSTEMS
If You Have Access to Both Sides of the Material, Wire Sawing is a Great Alternative to Wall Sawing!
WCH14
Features/Benefits:
SB Features/Benefits:
· Patented multiple roll
drive allows you to
start running with
minimum wire tension
· Cutting rate increases
by 50% compared to
conventional systems
· Virtually emission free
· Capable of large
demolition jobs
· Large wire storage and
long travel to give the
greatest performance
· Fine feed for application
control using innovative
damping system
· Patented drive roller system
· Fast, easy assembly for a
one person operation
· Can be wall mounted
· Compatible with the
WX-15 inverter and
electric motor
SB
WCH14
WCH14 Wire Saw Information:
SB Wire Saw Information:
· Maximum Cut: Perimeter up to 36 feet
· Wire Required: Minimum 11 feet
· Maximum Wire Storage: 46-1/2 feet
· Height: 60”, Width: 25”, Depth: 32”
Requirements:
· 17-21 GPM Power Pack
· BS-2 Remote Control Unit
· Maximum Cut: Perimeter up to 33 feet
· Maximum Wire Storage: 50 feet
Requirements:
HYDROSTRESS® WCH14 WIRE SAW
Sawing Equipment
Description
Part #
Assembled
Cat #
Weight (lbs.)
Complete Wire Saw
5803019 93588
with 30 CC Motor
BS-2 Remote Control Unit
5800112 48601
(single pump) with 26’ Hoses
HYDROSTRESS® SB WIRE SAW
List
Price
230
$27,051
60
6,682
Description
Part #
Cat #
Assembled
Weight (lbs.)
List
Price
375
$30,051
60
6,682
Complete Wire Saw
5502228 60599
with 40 CC Motor
5800112 48601
SK-B Features/Benefits:
SK-B Wire Saw Information:
· Offers direct mounting together with a patented multiple roll
drive that guarantees easy installation and trouble-free nonslip start up.
· Converts from drill rig to wire saw in minutes
· Fast, easy assembly for a one person operation
· Can be wall mounted
· Compatible with the WX-15 inverter and electric motor
· Maximum Cut: Perimeter up to 19-1/2 feet
· Maximum Wire Storage: 24-1/2 feet
Requirements:
HYDROSTRESS® SK-B WIRE SAW
Description
Part #
Cat #
Complete Wire Saw
5802234 63376
with 26 CC Motor
5800112 48601
Assembled
Weight (lbs.)
List
Price
190
$20,017
60
6,682
See Page 26 for Diamond Wire
See Page 182-188 for Power Packs
176
Various CC Sire Saws Motors Available, call customer
service for additional information at 800-321-5336
HYDROSTRESS® CIRCULAR & PLUNGE WIRE SAWS
Diamond Products Offers the Largest Range of Wire Saws In the Market!
Makes a Circular Cuts Up to 8’ Diameter
SL Circular Wire Saw Features/Benefits:
SL Circular Wire Saw Information:
· Simple and safe in the application
· Minimum installation time
· Economical, replaces expensive drill bits
· Compatible with the WX-15 inverter and electric motor
· Wire sawing instead of drilling opens up new application possibilities.
· Elliptical shaped cutouts are possible.
· Simple tensioning of the wire
· Precise flexible water supply
· Minimum Diameter: 20”
· Maximum Diameter: 98”
· Maximum Thickness: 24”
· Wire Requirement: Minimum 11 feet
Requirements:
HYDROSTRESS® SL CIRCULAR WIRE SAW
Assembled
List
Weight (lbs.) Price
5802240 74442
296
$14,072
Description
Part #
Complete Wire Saw with 22 CC Motor
Cat #
BS-2 Remote Control Unit (single pump) with 26’ Hoses 5800112 48601
6,682
60
Plunge Wire Saw Pulley Assembly
Features/Benefits:
See Page 26 for
Diamond Wire
See Page 182-188
for Power Packs
HYDROSTRESS® PLUNGE WIRE SAW pulley ASSEMBLY
Description
Part #
Cat #
List Price
Plunge Wire Saw Pulley Assembly Left Side
Plunge Wire Saw Pulley Assembly Right Side
3402034
3402035
68223
68224
$3,382
3,382
HYDROSTRESS® PULLEY FRAMES
HYDROSTRESS® IDLER PULLEYS
Description
Part #
Cat # List Price
8” Idler Pulley
Idler Pulley Stand
3400896
3400895
73031
73030
Description
Part #
Cat #
List Price
Pully Frame - Right Side 3400859
Pully Frame - Left Side 3400860
62784
62783
$1,966
1,966
$461
88.44
177
Sawing Equipment
· Sturdy Design
· Gentle Wire guidance thanks to plastic guide
· Optimal water guidance guaranteed
· Suitable for horizontal and vertical cuts
· Swivel rollers for correct wire guidance
· Fixed in 10” drilled hole
· Wire secured by protective plate
WIRE SAW ACCESSORIES
C-12 Hand Held
Wire Cutters
Wire Connectors
Makes it east to repair or connect
diamond wire easily
HT45 Crimping Tool Jaws
(set of 2 pieces)
Measures:
1.100” wide x .355” thick x .830 high
Crimp Jaws Only
Universal Tee
Universal
Knuckle
8” Idler Pulley
Idler Pulley Stand
with hole for bolting
to surface
Wire Saw Clamp
Sawing Equipment
WIRE SAW ACCESSSORIES
Wire Saw 7 Wheel
90 Degree Bracket
Plastic Idler Wheel Assembly
10” and 16”
Description
Part #
Cat #
List Price
1400174
68408
$1,504
HT45 Crimping Tool Jaws
1400297
72310
105
C-12 Hand Held Wire Cutters
1900073
00159
797
Screw Connectors
1400180
51176
41
Wire Connectors 3/8”
1400177
74910
29
Swivel Connectors
1400178
48176
90
8” Idler Pulley
3400870
77760
449
Idler Pulley Stand
Idler Pulley Stand
(for use with idler pulley with clamp)
Universal Tee
3400895
73030
88.44
3400896
73031
461
6020004
02569
110
Universal Knuckle
6020002
02567
178
Wire Saw Clamp
6020003
02568
123
Wire Saw 7 Wheel (90 degree bracket)
6075128
21504
10,240
10” Plastic Idler Wheel Assembly
6020035
02583
382
16” Plastic Idler Wheel Assembly
6020025
02581
554
M-2 Portable Wire Saw
5802248
99915
8,846
Swivel Crimp Pin Tool (For Pin Removal)
860404
67966
838
Punch Replacement (For Part# 860404)
148130
75678
101
178
WS25 WIRE SAW
Features/Benefits:
·Unlimited cutting depth
·No vibration or noise and fast cutting speed
·Modular design provides infinite setup options
·Universal clamps provide infinite orientation
of idler wheels
·Bases mount to concrete surface with
anchor bolts
Parts List: 1800760
Specifications:
0-5,000 ft/min - infinitely variable and reversible
6 ft. stroke driven by Danfoss 1.93 cubic inch hydraulic motor
Set up vertical or horizontal from the same frame
36” diameter driven by Char-Lynn 9.9 cubic inch hydraulic motor
525 rpm @ 25 gpm
32” diameter with neoprene lining in ‘V’ groove
8”, 10” and 16” special polyethylene wheels with sealed bearings
8” idler adapts to the end of 2” pipe
10” and 16” idlers have 1” shaft for use with universal clamps
For use with 2” schedule 80 pipe
Includes: (1) 8ft. column, (1) 36” drive wheel, (4) mounting bases,
(4) 16” idler wheels, (2) universal clamps, (1) 11ft. (1) 6ft and
(4) 3ft. schedule 80 pipe sections
WS25 WIRE SAW
Description
Part #
Cat #
List Price
WS25 Wire Saw
(Single Pump) with 26’ hoses
Wire Saw Control Station
5800061
02248
$11,825
5800112
48601
6,682
5800059
02247
12,881
02581
02583
02582
02578
02565
79330
79331
554
382
266
223
227
2,064
2,906
WS25 ACCESSORIES
16” idler wheel
10” idler wheel
8” idler wheel
Universal clamp
Pipe mounting base
24” drive wheel
32” drive wheel
179
6020025
6020035
6020034
6020020
6020000
6020051
6020052
Sawing Equipment
Wire Speed:
Drive Motor:
Sawing Angle:
Drive Wheel:
Second Drive Wheel:
Idler Wheels:
Pipe Mounting:
MOBILE TRACK WIRE SAW
Moveable Wire Saw That Increases
Cutting Speed and Profits!
Innovative tensioning spring for
consistent wire tension
Sawing Equipment
Part #: CC-TWS-V6R
Cat #: 24141
List Price:$158,242
Features/Benefits:
· Twice the cutting speed of conventional wire saws
· Infinitely variable speed and reversible drive
· Works well on rough terrain, inclines and where conventional wire saws
can’t operate
· Eliminates most of wire sawing set-up time
· Rubber tracks for superior movement
· Entire saw can be pulled back to pull the wire through the cut
· Safety strobe light
Specifications:
Radio remote control has a
range of 300 feet for safety
and convenience
· Powerful Cummins 110 HP engine
· 22 gallon fuel tank
· Dual stage air filter
· 36” drive wheel with variable speed
· 12” idler wheels with greaseable bearings and replaceable liners
Dimensions:
Length:
Height:
Width:
Weight:
78” (without idler)
68” (with muffler)
48”
3,300 lbs.
180
SC3000 SLOT CUTTING SAW
Up to22”
· Cuts three slots at one time using six 22” diameter blades
· Vacuums slurry as it cuts (slurry is pumped from the unit to an adjacent tanker)
Specifications:
Engine:
Drive Speed:
Fuel Capacity:
Maximum depth of cut
with 22” blade:
300 HP Cummins turbocharged diesel
200 feet per minute
48 gallons
Dimensions:
7-1/4”
Length:
Width:
Height:
Weight:
156”
66”
108”
10,000 lbs.
181
Part #: SC-3000
Cat #: 94595
List Price:$279,991
Sawing Equipment
Features/Benefits:
HYDRAULIC POWER UNITS
Part List and Manual #: 1801653
Part List and Manual #: 180372
CB15XL
· 15HP electric motor
· Heavy duty frame design
· Single lifting point
· Two large wheels for easy moving
Ful
· lyadjustableflowcontrol
Ful
· lyadjustableflowcontrol
Specifications:
Specifications:
Hydraulic Flow:
Maximum Pressure:
Hydraulic Tank Capacity:
Flow Control:
Hose:
Quick Disconnects: Dimensions: Weight:
Sawing Equipment
CB20E-XL
0-12 gpm
2,100 psi
11 gallons
Fully adjustable flow
25’ x 1/2” or 25’ x 5/8”
1/2” and 3/4”
48-1/2” L x 26-1/2” W x 39” H
450 lbs.
Hydraulic Flow:
Maximum Pressure:
Flow Control:
Hose:
0-15 gpm
2400 psi
11 gallons
Fully adjustable flow
25’ x 1/2” or 25’ x 5/8”
1/2” and 3/4”
48-1/2” L x 26-1/2” W x 39” H
550 lbs.
CB15XL POWER UNIT
Model #
Description
Part #
Cat#
Uncrated/Crated
List Price
Weight (lbs.)
CB15-XL (1/2”) 15 HP 230V Baldor Electric Motor with 1/2” x 25’ hose, 0-12 gpm @ 2100 psi 4250058A
10998
450/490
$8,605
CB15-XL (1/2”) 15 HP 460V Baldor Electric Motor with 1/2” x 25’ hose, 0-12 gpm @ 2100 psi 4250058B
10286
450/490
8,605
CB15-XL (1/2”) 15 HP 575V Baldor Electric Motor with 1/2” x 25’ hose, 0-12 gpm @ 2100 psi 4250058C
73238
450/490
8,605
CB15-XL (5/8”) 15 HP 230V Baldor Electric Motor with 5/8” x 25’ hose, 0-12 gpm @ 2100 psi 4250059A
13164
450/490
8,605
CB15-XL (5/8”) 15 HP 460V Baldor Electric Motor with 5/8” x 25’ hose, 0-12 gpm @ 2100 psi 4250059B
20568
450/490
8,605
CB15-XL (5/8”) 15 HP 575V Baldor Electric Motor with 5/8” x 25’ hose, 0-12 gpm @ 2100 psi 4250059C
14383
450/490
8,605
CB20E-XL POWER UNIT
CB20E-XL (5/8”) 20 HP 230V Baldor Electric with 5/8”x25’ hose 0-15 gpm @ 2400 psi
4220029A
43370
550/600
$10,259
4220029B
03082
550/600
10,259
4220029C
03085
550/600
10,259
182
CB18BV-XL
CB21H-XL
· 18HP Briggs-Vanguard gas engine
·Heavydutyframedesign · 20.5 HP Honda GX660 gas engine· Heavy duty frame design
· Large wheels for easy moving
·Fullyadjustableflowcontrol
Specifications:
Hydraulic Flow:
Maximum Pressure:
Flow Control:
Hose:
Specifications:
0-11 gpm
2850 psi
5-1/2 gallons
Fully adjustable
25’ x 1/2”
1/2”
35-1/2”L x 23-1/2”W x 30”H
350 lbs.
0-12 gpm
2600 psi
11 gallons
Fully adjustable
25’x1/2” or 25’x5/8”
1/2” and 3/4”
48-1/2”Lx26-1/2”Wx39”H
450 lbs.
4400267 $1,179
4.4 gallons
CB18BV-XL POWER UNIT
Model #
Description
CB18BV-XL (1/2”) 18 HP Briggs-Vanguard with 1/2” x 25’ hose, 0-12 gpm @ 2600 psi
Part #
Cat#
Uncrated/Crated
Weight (lbs.)
List Price
4250067
34017
350/375
$6,400
CB21H-XL POWER UNITS
CB21H-XL (1/2”)
20.5 HP Honda GX660 with 1/2” x 25’ hose, 0-12 gpm @ 2600 psi
4250063
78503
450/465
$8,402
CB21H-XL (5/8”)
20.5 HP Honda GX660 with 5/8” x 25’ hose, 0-12 gpm @ 2600 psi
4250064
35571
450/465
8,402
2702624
25901
25/30
2,465
Catalytic Muffler for 20.5HP Honda, high mount right side
183
Sawing Equipment
Hydraulic Flow:
Maximum Pressure:
Flow Control:
Hose:
Cooler Option Part #: Fuel Tank Capacity:
CB35BV-XL
CB49D
· 35 HP Briggs-Vanguard gas engine
· Fully adjustable flow control
Sawing Equipment
Specifications:
· 49 HP Deutz diesel engine
· Four large wheels for easy moving
· Hose hanger
Specifications:
Hydraulic Flow:
0-15 gpm
Maximum Pressure:
2950 psi
Hydraulic Tank Capacity:11 gallons
Fully adjustable
Flow Control:
Hose:
25’ x 5/8”
Quick Disconnects:
1/2” and 3/4”
48-1/2”L x 26-1/2”W x 39”H
Dimensions:
450 lbs.
Weight:
Cooler Option Part #:4400298 $1,638
Fuel Tank Capacity:
4.4 gallons
Hydraulic Flow:
24 gpm
Maximum Pressure:
2500 psi
Fully adjustable
Flow Control:
Hose:
25’ x 5/8”
Quick Disconnects:
1/2” and 3/4”
26”L x 24”W x 45”H
Dimensions:
1,210 lbs.
Weight:
Fuel Tank Capacity:
9 gallons
CB48D
· 48 HP Yanmar diesel water cooled engine
· Four heavy duty wheels for easy moving
· Hose hanger
· Large flow capacity for big jobs
Specifications:
Hydraulic Flow:
25 gpm
Maximum Pressure:
2500 psi
Fully adjustable
Flow Control:
Hose:
60’ x 3/4”
Fuel Tank Capacity:
13 gallons
1/2” and 3/4”
Quick Disconnects:
50”L x 33”W x 46”H
Dimensions:
Weight:
1,410 lbs.
Fuel Tank Capacity:
13 gallons
CB35BV-XL POWER UNITS
Model #
Description
n/a
35 HP Briggs-Vanguard gas engine with 5/8” x 25’ hose,
0-15 gpm @ 2950 psi
Catalytic Muffler for 35HP Briggs Vanguard gas engine
CB49D
49 HP Deutz diesel, 24 gpm @ 2500 psi
CB35BV-XL
Part #
Uncrated/
Cat# Crated Weight List Price
(lbs.)
4220028
03109
450/465
$9,031
2707355
29029
20/25
2,158
4250062
40613
1,210/1,300
$28,109
35791
1,410/1,500
$42,000
CB49D POWER UNIT
CB48D POWER UNITS
CB48D
48 HP Yanmar diesel, 25 gpm @ 2500 psi
184
2600811
CB30E-XL Part List and Manual #: 180372
CB30E-XL/CB40E-XL
CB50E
· 30HP electric motor(CB30E-XL) or
40HP electric motor (CB40E-XL & CB40E-XL H.P.)
· Four lifting points
· Heavy duty cage design
· High pressure power unit
Specifications:
Specifications:
Hydraulic Flow:
22 gpm
Maximum Pressure:
3900 psi
Fully adjustable
Flow Control:
Hose:
3/4” x 60’
Quick Disconnects: 1/2” and 3/4”
56”L x 26”W x 42”H
Dimensions: 1,290 lbs.
Weight:
CB30E-XL POWER UNITS
CB30E-XL
30 HP Leeson Electric motor, 21 gpm, @ 2500 psi 230V with starter box 4250050A
Uncrated/
Crated
List Price
Weight (lbs.)
$19,137
04487
1,250/1,310
CB30E-XL
30 HP Leeson Electric motor, 21 gpm, @ 2500 psi 460V with starter box 4250050B
09534
1,250/1,310
19,137
CB30E-XL
30 HP Leeson Electric motor, 21 gpm, @ 2500 psi 575V with starter box 4250050C
04263
1,250/1,310
19,137
Model #
Description
Part #
Cat#
CB40E-XL POWER UNIT
CB40E-XL
40 HP Electric motor, 28 gpm, @ 2250 psi 460V with starter box
4250052
48597
1,300/1,370
$25,395
CB40E-XL H.P.
40 HP Electric motor, 18 gpm @ 3450 psi with 460V starter box
4250053
85392
1,300/1,370
$28,887
CB50E
50 HP Electric motor, 22 gpm, @ 3900 psi 460V high pressure
4250055
93820
1,290/1,350
$49,257
CB50E POWER UNIT
185
Sawing Equipment
Hydraulic Flow:
18 gpm (CB40E-XL H.P.)
21 gpm (CB30E-XL)
28 gpm (CB40E-XL)
Maximum Pressure:
2500 psi (CB30E-XL)
2250 psi (CB40E-XL)
3450 psi (CB40E-XL H.P.)
Hydraulic Tank Capacity: 23.7 gallons
Fully adjustable
Flow Control:
Hose:
3/4” x 60’
1/2” and 3/4”
Quick Disconnects: Dimensions: 49”L x 28”W x 40”H
Weight:
1,250 lbs. (CB30E-XL)
1,300 lbs. (CB40E-XL & CB40E-XL H.P.)
HYDRA-GEN Power Unit
Hydra-Gen Takes
the Place of:
· 480 volt - 50 KW
generator
· 25 gpm - 2500 psi
hydraulic unit
· 120 volt - 5000 watt
generator
Part list and manual #: 1805052
Fits on most utility trucks and the Diamond
Products Custom Utility Truck
Available as in-truck model or
enclosed for outdoor flat beds
HYDRA-GEN POWER UNIT
Description
Part #
Sawing Equipment
John Deere 123 HP Hydra-Gen Unit 50kw
CC-HG-SK
John Deere 123HP Hydra-Gen Enclosed Unit 50kw CC-HGE-SK
John Deere 133HP Hydra-Gen 75kw
CC-HG-75KW
50’ hose set (2) with valve and quick disconnects
CC-50-HH
100’ hose set (2) with valve and quick disconnects CC-100-HH
50’ 6/4 cord with plugs
CC-50-EC
100’ 6/4 cord with plugs
CC-100-EC
Electronic on/off controls with flow meter
2800490
Remote throttle
6075060
30 gallon fuel tank
2503321
Water tight enclosure - must use with outdoor units
WTE
50 gallon tank - truck frame mount
2503605
Cat #
80490
94567
87265
85202
85203
85204
85205
80491
04691
85987
86661
91723
Uncrated/Crated
List Price
Weight (lbs.)
3,800/3,900
$58,742
3,900/4,000
60,761
4,200/4,300
64,384
55/65
1,752
110/120
2,554
50/60
601
100/110
1,313
35/40
4,263
5/8
672
90/115
1,189
800/850
1,878
90/125
738
Specifications:
Engine:
Electrical:
Hydraulics:
Dimensions:
Weight:
John Deere Tier III - 4045T turbo-diesel
High temperature and low oil safety shut off switches
Hour meter, temperature gauge, amp meter, oil pressure gauge (fuel tank not included)
50 or 75 KW Lima Mac generator with four separate outlets:
480V, 3-phase - 50 amp
480V, 3-phase - 30 amp
120V, single phase - 15 amp
120V, single phase - 30 amp
Variable displacement Eaton piston pump with pressure flow compensator
Flow: 25 gpm, Pressure: 2500 psi with 50 gallon reservoir tank
30” wide x 78” long x 64” tall (73” to top of stack)
3,800 lbs.
186
CB66 Power Unit
CB66 POWER UNIT
Part #
Cat #
List Price
66 HP Power Unit with John Deere Liquid Cooled
Diesel Engine
4250200
15801
$33,250
Specifications:
Engine:
Hydraulic Pump:
Fuel Tank:
Hydraulic Tank:
Hydraulic Flow:
Hoses:
66 HP John Deere liquid cooled diesel
Adjustable hydraulic flow & pressure
18 gallon with gauge
35 gallon hydraulic oil
Maximum 30 gpm flow - adjustable
Maximum 3000 psi - adjustable
1” return line, 3/4” pressure line
INCLUDES:
· Center lifting hook
· Skid type mount
· In-tank hydraulic oil filters
· Remote engine oil drain
· Air and water hydraulic oil cooling
· Houston street engine controls with shut down system
CB66 Dimensions:
Includes remote
pendant station
Length: 60”
Width: 27”
187
Height: 57”
Weight: 1,825 lbs.
without fuel
Sawing Equipment
Description
CB70-JD Trailer or Skid Mounted Power Unit
Large Capacity
at 28 GPM!
CB70DT Trailer Mount
Sawing Equipment
Features/Benefits:
· Large capacity hydraulic flow
· Choice of skid mount or trailer mount
accomodates your transportation on the job
· Easy to access parts for quick maintenance
Specifications:
Engine:
Maximum GPM:
Maximum PSI:
Flow Control:
Fuel Tank Capacity:
Hose:
Dimensions:
Yanmar, 4-cylinder diesel
water cooled
28 gpm
2,800 psi
Fully adjustable
40 gallons
17 gallons
100’ x 3/4”
110” x 72” x 60”
CB70DS Skid Mount
CB70 POWER UNITS
Uncrated/Crated
List Price
Weight (lbs.)
Model #
Description
Part #
Cat #
CB70DT
68 HP Yanmar diesel, trailer mount
2600353
78665
2,900/3,000
$45,084
CB70DS
68 HP Yanmar diesel, skid mount
2600354
78663
2,900/3,000
40,888
188
TBG-130C BRIDGE DECK GROOVER
12”
A new and improved version of
the TBG130B, the TBG-130C
Bridge Deck Groover delivers
more productivity, reduced
grooving costs and less highway
downtime.Redesignedhydraulics
for maximum efficiency and
ease of maintenance.
Call 1-800-225-0142 for more
information and pricing.
Features/Benefits:
Engine: ·Vacuum - positive displacement with larger vacuum chamber,
replaceable filters and easily accessible cleanouts
·Rapid blade carriage retract.
·Automatic blade coolant.
·Side mounted removable operator platform
·Front and rear pointers
·Night operation light package
·Automatic kickouts for starting and stopping cut in the same place
·Adjustable bogey for independent depth control
·Hydraulically driven positive displacement blower with inlet filter and
discharge silencer
·Slurry pump
·Heavy duty pad-eyes on all four corners for crane loading onto
bridges with no access.
·On board 50 gallon fuel tank provides up to 10 hours of operating time.
Cummins model 6.7 Cummins turbo-charged diesel
with full electronic control and on board diagnostics.
195 HP @2000 rpm.
Dimensions:
Length: 90”; Cutting Head Width: 39” max. Height:
111”; Bladeshaft: 5”; Blade Diameter: 12”
Drive Control: Provided by two hydraulic wheel motor assemblies,
each with integral brake and two speed function.
2 wheel heavy duty disk brakes
Brakes:
Bladeshaft: Closed loop variable displacement pump and bent
axis fixed displacement axial piston motor. Both 90 cc.
Drive:
Blade Coolant: Magnetic strainer and water pressure gauge with
audible alarm for low pressure and automatic coolant
shaft. Pump flow range is infinitely variable up to 48
gpm, with max 5000 PSI.
Function Power: Axial piston pump for 24 gpm to control valves
Instrumentation: Blade drive pressure gauge
Blade coolant pressure gauge & low pressure alarm
Engine oil pressure gauge
(with low pressure shutdown)
Engine coolant temperature gauge
(with high temperature shutdown)
Engine tachometer (max. engine speed = 2100 rpm)
Engine voltage meter
Electronic data screen that the operator can preset
to read J1939 fault codes and monitor engine
parameters (i.e. RPM, water temp, oil pressure, boost
pressure, %load, engine hours, date/time, etc)
UNIQUE “CRAB” FEATURE
A switch is provided on the control panel which causes the rear
drive wheels to pivot to 28 degrees. A quick turn of the steering wheel to full left lock positions the front wheels at the same
28 degrees. This allows the T BG130C to “crab” sideways while
backing up and remain parallel to the previously cut grooves. The
TBG130C can thus groove in a 12’ wide lane and realign for the
next pass in one backward movement. NO MACHINE ON THE
MARKET TODAY OFFERS THIS FEATURE (see diagrams below).
189
Sawing Equipment
Specifications:
PC150 BUMP GRINDER and GROOVER
12”
The PC150 Bump Grinder and Groover is a
fast, compact that delivers 80% of that larger
unit’s productivity for reduced grinding costs.
Sawing Equipment
Call 1-800-225-0142 for more
Blades Can be Stacked 36” Wide
Features/Benefits:
·Capable of grinding to within 10” of a vertical wall.
·Fast, nimble and easy to use.
·5” diameter spindle for use with 12” diameter blades and can
accept up to a 36” width grinding head.
·Front bogey assembly is adjustable for an effective wheelbase of
9’ to 11’ (center of cutting head to center of front bogey).
·Onboard vacuum system with diaphragm slurry pump and silencer.
Specifications:
Engine:
Cummins QSB 6.7 liquid cooled, turbocharged after cooled, electronic, controlled diesel engine producing 260 HP @ 2000
RPM. Drive to the blades is through a power take-off clutch and mechanical gear box and belt drive. At maximum power
fuel consumption is 10 gph. Fuel capacity is 100 gallons (10 hours of operating time).
Head Drive:
Power from the engine is transmitted through a manually operated/over center PTO clutch into a right angle drive
gearbox through a special shock absorbing coupler. The vacuum blower is mounted directly above the right angle drive
and driven by one of the output shafts.
Blades:
A 5” diameter spindle for use with 12” diameter blades is standard.
Propulsion:
Drive is provided by two hydraulic wheel motor assemblies, each with integral brake and two speed function. Speed is
0-300 feet per minute forward/reverse.
Controls:
Ground drive controlled with an electronic joystick which drives a Danfoss proportional drive. Speed is 0-300 FPM
forward or reverse.
Instrumentation: (lighted for night time operations):
Blade Drive Pressure Gauge; Blade Coolant Pressure Gauge and Alarm; Engine Oil Pressure Gauge (with low pressure
shutdown); Engine Coolant Temperature Gauge (with high temperature shutdown); Engine Tachometer (max. engine
speed is 2100 RPM); Engine Voltage Meter, Gear box lube pressure gauge, Hydraulic system pressure gauge, Blade
coolant pressure gauge and low pressure alarm, Electronic data screen that the operator can preset to read J1939 fault
codes and monitor engine parameters (i.e. RPM, water temp, oil pressure, boost pressure, %load, engine hours, date/
time, etc)
Grinding: Length = 17’. Front Bogey assembly is hydraulically adjustable for an effective wheelbase of 9’ to 11’
Dimensions: (center of cutting head to center of front bogey). Width = 8’. Weight is approximately 17,000 lbs with grinding head.
Height:
8’4” with machine unpinned and lowered.
190
PC6000EC HIGHWAY GRINDER
14”-18”
Features/Benefits:
·Built on a standard PC6000 platform with full electronic control and
instrumentation, as well as advanced features such as data logging and
electronic blade measurement.
·A full industrial computer acts as an operator interface for the machine
allowing the operator to monitor conditions and adjust set points as needed.
·Sensors located around the machine constantly monitor operating conditions
and adjust forward travel speed.
·Computer that delivers total control of depth control wheels, engine load and
forward speed.
Call 1-800-225-0142 for more
The PC6000EC Highway Grinder
brings proven and patented closed loop
control to the field of highway diamond
grinding. Custom designed and built
at our Oakdale, California facility The
revolutionary PC-6000EC is state-of-theart in highway grinding efficiency.
A full industrial computer acts as an operator interface for the machine allowing
the operator to monitor conditions and adjust set points as needed.
Dimensions: Weight: Transportation: Power: Cutting Width: Fuel Capacity: Fuel Consumption:
Hydraulic System: Head Drive: Function Power: Instrumentation: Other Features: Blades: Length: 47’ Width: 8’6” Height: 11’.
53,000 lbs. with grinding head and fuel tank full. 75,000 lbs with water tank full.
Machine is a legal load (with water tank empty) for standard 3-axle tractor. Axle loads are approximately 25,000 lbs.
on trailer tandem and 25,000 lbs. on tractor tandem. No permits required. Standard light and air connections.
680 HP QSX15-630 Cummins diesel engine, liquid cooled.
50” maximum. Blade Diameter: 14”, 16” or 18”.
450 gallons (tank supplies both main and auxiliary engines).
22-25 gph (main engine).
50 gallon hydraulic reservoir.
Power from the engine transmitted through a manually operated/over center PTO clutch into a right angle drive
gearbox though a special shock absorbing coupler. The output shafts of the right angle gearbox drive two timed
synchronous belts which transmit the power to the blade shaft.
Provided by an axial piston pump which delivers 24 GPM to Rexroth control valves.
Blade Coolant Pressure Gauge and Alarm; Right Angle Drive Pressure Gauge. Engine Instrumentation and
Industrial PC.
Dual Controls with electronic joysticks on each side to control ground drive. Electro-Hydraulically operated depth
control jacks reduce operator fatigue. Integral two-speed wheel motors increase travel speed while automatically
selecting the appropriate travel gear.
14”, 16” or 18” blades may be used with the PC6000EC.
191
Sawing Equipment
Specifications:
CUSTOM UTILITY TRUCKS
Made the Way
You Want with
Your Jobs
in Mind
Side graphic wrap not included
Sawing Equipment
Call 1-800-321-5336 for more information.
Hydra-Gen Power Unit
Power Reels
· John Deere 123 HP
Holds two 100’, 3/4” hydraulic hoses, swivel
· Installed and ready to go onto your truck fittings, 12 volt power needed, hoses not included
Part # CC-HG-SK, Cat # 80490
Reels Only
List Price: $58,742
Wall Sawing:
Enclosed Hydra-Gen Unit
Part # 2506351, Cat # 04703 List Price:$2,738
Part # CC-HGE-SK, Cat # 94567
Hand Sawing:
List Price: $60,761
Part #2502581, Cat # 91720 List Price:$1,687
Larger Capacity Hydra-Gen Unit
Electric Slab Sawing:
Part # CC-HG-75KW, Cat # 87265
List Price: $64,384
Reel Electric with Water:
See Page 186 for More Information
192
Blade Rack
Up to 54” capacity
Part # 6075081, Cat # 04701
List Price: $549
We offer 10 gauge steel water tanks, powdercoated inside and
outside - built to your specifications any size and shape!
Core Bit Rack
3 Level Shelf Unit
Part # 6075078
Cat # 04698
List Price: $1,237
Part # 6075073
Cat # 04693
List Price: $711
Plastic Water Tank
· 175 gallons
· 3/8” thick plastic, 10” fill cap
· 52” tall x 36” deep x 22” wide
Part # 2506323, Cat # 04689
List Price: $2,913
Additional Truck Options
Wall Saw Track Holder
Blade Guard Holders
Right Side
Part # 6075079, Cat # 04699
Left Side, List Price: $138
Part # 6075080, Cat # 04700
List Price: $138
Left Side
Part # 6075075, Cat # 04695
Right Side List Price: $240
Part # 6075076, Cat # 04696
List Price: $240
Part #
Cat #
List
Price
Remote throttle for Hydra-Gen
6075060
04691
$672
2503321
85987
1,189
2503605
91723
738
Plastic water tank 3/8” thick with baffles
2506323
04689
2,913
2 steel water tanks, 190 gallons each
powder coated (380 gallon total)
2-WT-388
86268
4,724
325 gallon water tank for flatbed truck
FB-WT
86662
3,421
Power reel for (2) 100’ 3/4” hoses
46” wide x 25” long x 26” tall
2502580
85814
2,758
2502110
2503413
99987
28003
3,006
515
2503101
88117
1,304
2503178
21063
2,095
2503179
21062
2,238
69299
69319
04692
86272
94799
86658
85205
18697
99988
18701
27885
18703
54363
04704
91718
04697
06139
46.11
358
1,058
4,303
332
45.91
1,313
552
268
381
107
1,243
39.60
37.10
3.78
268
141
30 gallon fuel tank for Hydra-Gen
mounted on unit
Truck mounted 50 gallon auxiliary fuel tank
mounted on truck frame
Power reel for (1) 3/4” x 150’ hose
Power Hose Reel
Ventilation Fan
· For two 100’ x 3/4” hoses · Installed in the top of the truck box
· 22” wide x 36” long x 36” tall
· Ventilation for heat and fumes
Part # 2506351, Cat # 04703
· 12 volt
List Price: 2,738
Part # 2506353, Cat # 04690
List Price: $375
Water Pumps
Honda water pump with plumbing
Part # HWP-CL, Cat # 86660
List Price: $1,499
Sliding water pump mount
Part # 6040605, Cat # 53413
List Price: $285
12 volt water pump (5 GPM)
Part # 2706488, Cat # 51268
List Price: $531
110-220 volt single phase
water pump
Part # 2601676, Cat # 94800
List Price: $959
193
Hand crank reel- holds 200’ of 1/2” hose
Power reel w/o swivel - holds 200’ of 6-4
SO electric cord
Power reel with swivel-holds 200’ of
10-3 SO electric cord
Power reel with swivel-hold 200’ of
10-4 SO electric cord
Hose stop
2502157
2506280
Power reel rack - holds 3 reels
6075072
Power reel w/200’ 6-4 cord and 50amp plug ECR200P
Paint box
2503474
Saw tie downs (each) lashing ring- 2 per saw 2503320
100’ of 6-4 SO cord with 50amp plugs
CC-100-EC
Floor mount handsaw rack for 2 saws
6045000
Hook rack
6040421
Strobe light
2802597
Strobe light base
2802596
Wall saw holder
6045001
12 volt spot light - outside
2500194
12 volt spot light - inside
2804501
1/2” water hose
3201312
Hand saw holder
6075077
Hammer/prybar holder
6075091
3/4” roller set for reel
Sawing Equipment
Description
HYDRAULIC HAND SAWS
21” - 25”
Pro Series Flush Cut:
·Dual trigger
·Trigger activated water valve
·Overhung load adapter that eliminates premature
motor failure due to axial and radial loads on
the motor shaft while creating a protective seal
preventing hydraulic fluid contamination.
·Cover included
PRO SERIES HYDRAULIC HAND SAWS - FLUSH CUT
Parts List: 1805054
Blade Capacity/
Guard Type
Leader in After-the-Sale Service with
Technical Assistance and Customer
Friendly Warranties
(GPM) Gallons
Per Minute
Part #
Cat #
Ship
Weight
List
Price
21” Flush Cut
8 gpm
5800850
03958
39
21” Flush Cut
10 gpm
5800851
07210
39
21” Flush Cut
12 gpm
5800852
05818
39
21” Flush Cut
15 gpm
5800853
15005
39
25” Flush Cut
8 gpm
5800854
08693
41
25” Flush Cut
10 gpm
5800855
15199
41
25” Flush Cut
12 gpm
5800856
06345
41
25” Flush Cut
15 gpm
5800857
15201
41
$3,830
3,830
3,830
3,830
3,900
3,900
3,900
3,900
Light Weight Flush Cut:
CARTS FOR PRO SERIES AND LIGHT WEIGHT HAND SAWS
· Dual trigger
· Trigger activated water valve
· Blade flanges mount directly to motor
· Cover included
· Light weight
Description
Part #
Cat #
Ship
Weight
List
Price
$1,243
1,247
6087148 17624
46
6087149 76037
48
Sawing Equipment
Cart - 21” Hydraulic Hand Saw
Parts List: 1805084
LIGHT WEIGHT HYDRAULIC HAND SAWS - FLUSH CUT
Blade Capacity/
Guard Type
(GPM) Gallons
Per Min
21” Flush Cut
Cat #
Ship
Weight
List
Price
8 gpm
Dual trigger 5800860 14392
29 lbs.
21” Flush Cut
10 gpm
29
21” Flush Cut
12 gpm
29
21” Flush Cut
15 gpm
29
$3,100
3,100
3,100
3,100
Feature
Part #
194
Hand saw carts make horizontal
cutting easier and eases
operator fatigue
HYDRAULIC HAND SAWS
16” - 24”
HS SERIES Hydraulic Hand Saws - Standard Guard
Blade Capacity/ (GPM) Gallons
Guard Type
Per Minute
HS Series Standard:
· Single trigger
· Manual water valve
Part #
Cat #
Ship Weight List Price
16” / Standard
10 gpm
HS-16-10
68005
32 lbs.
16” / Standard
12 gpm
HS-16-12
15210
32
16” / Standard
15 gpm
HS-16-15
35393
32
20” / Standard
8 gpm
HS-20-8
91407
27
20” / Standard
10 gpm
HS-20-10
95255
32
20” / Standard
12 gpm
HS-20-12
86118
32
20” / Standard
15 gpm
HS-20-15
80760
32
24” / Standard
8 gpm
HS-24-8
97183
32
24” / Standard
10 gpm
HS-24-10
50461
32
24” / Standard
12 gpm
HS-24-12
92375
32
24” / Standard
15 gpm
HS-24-15
80466
32
$3,474
3,474
3,474
3,437
3,437
3,437
3,437
3,522
3,522
3,522
3,522
HS SERIES HYDRAULIC HAND SAWS
- FLUSH CUT WITHOUT COVERS
Blade Capacity/
Guard Type
(GPM) Gallons
Per Minute
Part #
Cat #
Ship Weight
20” Flush Cut
10 gpm
HS-20-F-10
50463
32 lbs.
20” Flush Cut
12 gpm
HS-20-F-12
94878
32
20” Flush Cut
15 gpm
HS-20-F-15
81451
32
24” Flush Cut
8 gpm
HS-24-F-8
50465
32
24” Flush Cut
10 gpm
HS-24-F-10
50319
32
24” Flush Cut
12 gpm
HS-24-F-12
94076
32
24” Flush Cut
15 gpm
HS-24-F-15
80458
32
$3,678
3,678
3,678
3,783
3,783
3,783
3,783
Cat #
Ship Weight
List Price
List Price
OPTIONS
Part #
Cover for Flush Cut 20” hand saw
2502559
80750
20 lbs.
Cover for Flush Cut 24” hand saw
2503508
87129
20
$428
540
CARTS FOR HS SERIES STANDARD & FLUSH CUT HAND SAWS
Description
Part #
Cat #
Ship Weight
6087146
25538
45 lbs.
6087147
21803
48
Hand saw carts make horizontal
cutting easier and eases
operator fatigue
List Price
Sawing Equipment
Description
HS Series Flush Cut without Cover:
· Single trigger
· Manual water valve
$832
837
HYDRAULIC HAND SAWS - COUNTER CLOCKWISE ROTATION
Blade Capacity / (GPM) Gallons
Guard Type
Per Minute
Part #
Cat #
Ship Weight
20”
12 gpm
5801204
37578
39 lbs.
20”
15 gpm
5801205
15338
39
24”
15 gpm
5801206
92798
39
24”
12 gpm
5801207
13539
39
195
List Price
$3,321
3,373
3,482
3,430
FAST-CUT SLR HIGH SPEED CUT-OFF SAW
Runs Cleaner and
Greener!
12”or 14”
With SLR Technology
Scavenged Loss Reduction
For a Cleaner Running Engine
SLR muffler complying with EUII and
EPAIII exhaust emission limits emission reduction without
aging factor
Sawing Equipment
FC7312 & FC7314 FAST-CUT SLR HIGH SPEED SAWS
List Price
Capacity
Weight (lbs.)
Model #
Engine
Part #
Cat #
FC7312
5.6bHP, 73cc - 20mm arbor
5801527
29476
12”
21.38/26
$1,111
FC7314
5.6bHP, 73cc - 20mm arbor
5801528
03853
14”
21.38/28
1,146
Features:
· Light weight and balanced for less operator fatigue
· Smooth start decompression valve reduces start up force by 70%
· 5-stage filtration system
· Fully adjustable blade guard
· Water kit included and garden hose connection
· Tool kit included with universal wrench, angle torx screwdriver,
screwdriver and bushing in carry bag
· Sure-grip rubber coated handles
Ultra-Extend
2-stroke synthetic oil
· Powerful 73cc engine
(48 - 2oz bottles per case)
Part # 6060477, Cat #17374
List Price: $74
196
4 bottles Included with saw.
Ultra-Extend synthetic oil
Makes 1 gallon - 50:1 ratio
Larger initial foam filter along with
upgraded main paper filter
Benefits:
· Optimized cooling from air flow and fuel compensator - reduces cylinder temperature
· Reinforced hood fastening system keeps the air cleaner cover secure
· Better engine tuning allows for minimal maintenance
· Improved fuel consumption and increased cutting efficiency
· Quick action blade guard adjustment and belt tensioning
· Proven mass dampening system that greatly reduces vibration for operator comfort
· Computerized ignition with digital timing control for easy starting, blade
· RPM control and consistent power
· Ignition coil with start support function for faster starting
197
Sawing Equipment
Modified Deco Valve,
Carburetor and Improved
Ignition Coil for Fast Starting
HCH50 FLUSH CUT CHAIN SAW
Features/Benefits
· Unique bar mount design allows you to flush cut to the wall, floor or ceiling
· Cuts 1.5” deeper than the competition
· Runs much quieter than gas powered saws
· Requires our own bar and chain - available in sizes 12”, 16”, 20’ and 24”
· Minimum hydraulic supply: 10 gpm, maximum: 12 gpm
Sawing Equipment
HCH50 FLUSH CUT DIAMOND CHAIN SAWS
Description
Part #
Cat #
Weight (lbs.) List Price
HCH50 Flush Cutting Hydraulic Chain Saw *
5801010
55079
27
$3,924
* NOTE: Bar and chain not included with power head - must be purchased separately.
12” Bar for HCH50 & CSF50 Flush Cut Chain Saw
6063039
85297
2 lbs.
235
6060261
77961
2.5
250
6060260
76238
3
323
6063038
83689
3.5
413
Rental Gauge for Diamond Chain
2501008
48560
48
861
* CSF50 Hydrostress corner cut chain saw found on pg 175
DIAMOND CHAIN SAW ACCESSORIES
DESCRIPTION
PART #
CAT #
List Price
Chain Repair Kit - includes segment, 2
drive links and 2 connecting links
For concrete chain saw - more designed
to repair an old segment
6048617
27193
$68.36
6048615
27191
528
6048742
6048786
47103
36739
25.20
508
6048714
57420
40.32
Service kit - includes spinner, breaker,
chain repair kit
Anvil for chain breaker
Carrying case for chain saw
Connect link kit with both male and femal
links - 5 per kit
198
Many chains to choose from:
Abrasive: soft, abrasive materials
Concrete: general purpose, hard materials
Double Bumper:general purpose with segment protection - steel ‘ramps’ on the
chain links that protect the segment from getting knocked off
Premium: general purpose, long life
Supreme: general purpose, longer life
DIAMOND CHAIN
Great finishing tool when cutting
openings that diamond blades can’t
get the depth needed. Doesn’t
‘overcut’ like round blades when
cutting corners.
199
PART #
DCC3112SPD
DCP3112SP
DCU3112SP
DCA3716SP
DCC3716SP
DCC3716SPD
DCP3716SP
DCU3716SP
DCA4320SP
DCC4320SP
DCC4320SPD
DCP4320SP
DCU4320SP
DCU4924SP
DCC4924SPD
CAT #
85300
85298
85299
77950
77952
77958
77954
77956
77951
77953
77959
77955
77957
85302
85410
List Price
$1,083
1,047
1,083
1,022
1,088
1,088
1,250
1,293
1,236
1,271
1,271
1,450
1,499
1,989
2,019
Sawing Equipment
DESCRIPTION
12” Concrete - 31 seg (general purpose)
12” Premium - 31 seg (long life)
12” Supreme - 31 seg (longer life)
16” for Abrasive Material - 37 seg
16” for Concrete - 37 seg (general purpose)
16” Concrete - 37 seg (double bumper)
20” for Abrasive Material - 43 seg
20” for Concrete - 43 seg (general purpose)
CC300M MASONRY SAW
14”
Light Weight and Easy to Use
Moveable Head
Can Be Used To Bring the
Blade Down on the
Material or Locked to
Push the Material
Into the Blade
Features/Benefits:
Specifications:
· The most cost-efficient way to cut masonry
· Cuts 5” deep with 14” blade
· Powerful 2 HP electric motor
· Durable frame design
· Tool-free air filter replacement
· Longer motor life due to a superior foam air filter
· Includes 2 spare air filters
· Smooth sliding material cutting table
· Cutting head is pulled down into the material
Power Supply:
Motor Power:
Amp Draw:
RPM:
Max. Depth of Cut:
Max. Length of Cut:
Material Capacity:
Saw Height:
Saw Length:
Saw Width:
Masonry Blades
can be found
on Pages 40-41
Sawing Equipment
* Blade not included
115V/60Hz
2 HP
15 amp
3,600
5”
16”
8” x 8” x 16”
24” without stand
28”
23”
CC300M MASONRY SAW
Model #
Motor Type
Part #
CC300M
2 HP - 115 Volt 15 amp Electric
5800730
List Price
Capacity Weight (lbs.)
$993
84807
14”
80/87
Cat #
CC300M TRAY/CART ATTACHMENTS
Description
Rip Guide
180o Adjustable
Angle Guide
CC300M with
Wet Cut Kit
Part #
6043002
Cat # List Price
57689
$37.04
6043004
57691
68.02
CC300M with Dust
Collection Kit
Wet cut kit
Includes water pump
CC300M OPTIONS
Description
Folding Stand for CC300M
Wet Cut Kit for CC300M
Dust Collection Kit for CC300M
Wet/Dry Pro Vacuum
200
Part #
6043056
6043058
6043057
2600612
Cat # List Price
84808
$158
90644
308
84809
239
27631
3,003
Connects to most
shop vacuums, our
pro collection vac
and dustless systems
See our Dustless
Products on
Pages 240-243
CC350M MASONRY SAW
14”
Cost Efficient Masonry Cutting
Masonry Blades
can be found
on Pages 40-41
Features/Benefits:
· The most cost-efficient way to cut pavers
· Powerful 1.5 HP electric motor
· Includes leg kit with 2 rear wheels
· Smooth sliding material cutting table
· Cutting head is pulled down into the material
· Cuts 5” deep with 14” blade
· Durable frame design with closed back
· Water pump included
· Water and material is contained in the heavy duty metal tray
CC350M MASONRY SAW
Motor Type
Part #
Cat #
List Price
CC350M-E1 1.5HP, 15 Amp 115V/60Hz Electric 5800731
98685
14”
178/193
$1,117
CC350M-E2 1.5HP, 7.5 Amp 220V/60Hz Electric 5800732
98686
14”
178/193
1,117
Specifications:
Power Supply:
Motor Power:
Amp Draw:
RPM:
Max. Depth of Cut:
Max. Length of Cut:
Material Capacity:
Saw Height:
Saw Length:
Saw Width:
Weight:
115V/60Hz or 220V/60Hz
1.5HP
7.5 or 15 amp
3,600
5”
16”
8” x 8” x 16”
29” without leg kit
50-1/2” with leg kit
48”
24”
178 lbs. with leg kit
Cutting head can be adjusted to cut at
45 or 90 degree angles
201
Sawing Equipment
Model #
CC500MXL2 MASONRY SAW
14”
Part # 5800803
Part # 5800801
Shown with optional
folding stand
Side Carrying
Handles Are
Standard
Masonry Blades
can be found
on Pages 40-41
Parts Lists # 1800657 (CC500M)
1801098 (CC500MXLII)
Sawing Equipment
Features:
Benefits:
· Easy and safe access to depth control lock
· Stay level blade guard
· Open back cutting allows longer material to be cut
· Removable cutting head
· Heavy duty frame design help resist damage to saw body
· Leg kit standard - folding stand optional
· Reinforced slide rails keep the cart running smoothly
· Side carrying handles
· Simple yet strong design allows easy maintenance
· Includes water pump
· Sealed drain hole on the bottom of the tray allows quick clean up
· Vulcanized rubber coated material slide cart
· Open throat cutting
Low Amperage on Electric Models:
· 1.5HP Model Standard Draw 13.4 Amp - Perfect for House Power
· 2.0HP Model Standard Draw 15.8 Amp
· 2.5HP Model Standard Draw 21 Amp
CC500MXL2 MASONRY SAWS
Model #
Motor/Engine Type
Part #
Cat #
CC515MXL2-E1
CC520MXL2-E1
CC525MXL2-E1
CC530MXL2-E1
CC555MXL2-H
CC555MXL2-BV
CC565MXL2-L
2.0 HP Baldor - 1PH 115/230V Electric
3.0 Baldor-1PH 115/230V - 50 Hz Electric
5.5 Honda GX200 Gas
5.5 HP Briggs & Stratton Gas
6.5 HP Lifan Gas
5800799
5800814
5800801
5800802
5800803
5801217
5801101
03725
08667
03726
03728
03732
23961
34008
202
Blade Uncrated/Crated List
Price
14”
14”
14”
14”
14”
14”
14”
194/219
195/220
196/221
205/230
172/197
170/195
172/197
$2,092
2,137
2,267
2,360
2,980
2,729
2,250
Removing the saw head is simple just pull two locking pins and lift the
head off of the frame. The cutting
depth adjustment is on the side of
the frame instead of the back.
The blade shaft and bearings are
enclosed in a dust free housing to
ensure long bearing life. The blade
shaft cover plate allows easy access for
greasing the bearings. The flange block
bearings make bearing replacement
easy without the need for a hydraulic
press or other special tools.
The stay-level blade guard provides the
operator with safety and convenience
while sawing. Our pivot mechanism
resists slurry build-up, which could
affect pivoting performance.
As an option, the CC500M can be fit with an
emergency shut off button. (shown above)
Part # 6011615 Cat # 27628 $162
Specifications:
Maximum Depth of Cut:5”
Blade Shaft Diameter:7/8”
Arbor Diameter:1”
Blade Shaft Bearings: Flange block ball bearings
Blade Shaft Drive:
2 belt
Right (electric), Left (gas)
Blade Mounting:
Blade Raise/Lower:
Counterbalanced, spring tensioned head
pivots on two 7/8” flange block bearings
Blade Coolant:
Dual spray tubes, pump fed (electric models),
pump from tray (gas models)
3-stage cyclone (gas models)
Air Filter:
Fuel Capacity:
1 gallon (gas models)
High Temp Shut-off: Included (electric models)
Folding Stand
Folding Stand
with Wheel Kit
CC500MXL2 OPTIONS
Part #
Cat #
Folding Stand
Folding Stand Upgrade*
Folding Stand Wheel Kit
Cord 50 ft. 12GA 115V 20A
Twist to 15A Straight
2500839
6030042
6030040
46870
46893
48547
List
Price
$208
175
82.97
4699100
47884
128
Cord 100 ft. 12GA 115 V 20A
4699101
Twist to 15A Straight
48548
226
*Must be ordered with new saw to upgrade from the leg kit.
CC500M Dimensions:
A. Saw Length
34”
B. Saw Width
24-3/4”
C. Saw Height
32-7/8”
D. Stand Height
27”
E. Total Height*
58-3/8”
F. Arbor Height over Cart15-3/8”
G. Cart Travel
20-3/4”
*Withcuttingheadraisedtomaximumheight
203
Sawing Equipment
Description
CC800M BLOCK SAW
20”-24”
Part #
5800540
Part #
5800547
Sawing Equipment
Features:
Benefits:
· 24” blade cuts a 10” block in a single pass
· Stay level blade guard and enclosed blade shaft
· Replaceable cart travel rails
· Durable 3/16” steel frame
· Includes water pump
· Easy rolling 16” x 25” aluminum cutting cart/tray
with vulcanized rubber coated non-slip top
· Large capacity, deep tapered water tray
· Foot pedal controlled operating head leaves the operators
hands free to guide material
· Hand wheel for quick and easy blade cutting depth adjustment
· Enclosed cart wheels prevent damage
· Forklift opening for easy transport
· 2 V-belts promote efficient delivery of power to the blade
· Open back design for rip cutting longer materials
· Counterbalanced stay level blade guard assures the head is
parallel to the cutting cart at all times
CC800M BLOCK SAWS
Model #
Motor/Engine Type
Part #
Cat #
CC850M-E1-20
CC850M-E1-20
CC850M-E3-20
CC875M-E1-20
CC875M-E3-20
CC875M-E3-20
CC875M-E3-20-575V
CC875M-E1-24
CC875M-E3-24
CC875M-E3-24
CC875M-E3-24-575V
CC809H-20
CC809L-20
CC813H-20
CC813H-24
5 HP - 1PH Electric
5 HP - 3PH Electric 230V
5 HP -3PH Electric 460V
7.5 HP - 1PH Electric
7.5 HP - 3PH Electric 230V
7.5 HP - 1PH Electric
9 HP Lifan Gas
5800540
5800541A
5800541B
5800542
5800544A
5800544B
5800549
5800543
5800545A
5800545B
5800550
5800546
5801107
5800547
5800548
46820
96416
18533
47664
96015
96336
48549
47630
97240
97000
48550
47024
33971
47047
47046
204
Blade
Uncrated/Crated
List Price
Capacity WEIGHT (lbs.)
20”
530/600
$4,389
20”
550/620
4,364
20”
550/620
4,364
20”
560/630
4,603
20”
550/620
4,574
20”
550/620
4,574
20”
550620
4,566
24”
560/630
4,736
24”
550/620
4,706
24”
550/620
4,706
24”
570/640
4,701
20”
580/650
4,935
20”
576/645
4,250
20”
600/670
5,208
24”
600/670
5,348
Pedal mechanism
is spring loaded,
giving you more
control of your cut
Hand wheel makes
it easy to adjust
your cutting depth
Foot pedal leaves the
operator’s hands free
which helps safety
issues when cutting
Specifications:
Maximum Depth of Cut: 8” with 20” blade, 10” with 24” blade
Arbor Diameter:1”
Blade Shaft Bearings: Flange block ball bearings
2 premium gripnotch v-belt
Blade Shaft Drive:
Blade Raise/Lower:
Counterbalanced, spring tensioned head pivots on
two 1” flange block bearings
Dual spray tubes, pump fed (electric models),
Blade Coolant:
garden hose connection (gas models)
Air Filter:
3-stage cyclone (gas models)
Fuel Capacity:
1 gallon (gas models)
High Temp Shut-off: Included (electric models)
Starter:
Recoil on gas models, capacity on electric models
We offer 20” and 24” masonry blades
to maximize your productivity when
using the CC800M or any of the other
masonry saw models.
CC800M Dimensions:
A. Saw Length
34”
B. Saw Width
24-3/4”
C. Saw Height
32-7/8”
D. Stand Height
27”
E. Total Height*
58-3/8”
F. Arbor Height over Cart15-3/8”
G. Cart Travel
20-3/4”
*Withcuttingheadraisedtomaximumheight
Masonry Blades can be
found on Pages 40-41
205
Sawing Equipment
Available in 5 different quality grades.
See Pages 40-41 for more information.
TILE SAWS
All Tile Saws Include
a Free Tile Blade
4-1/2”- 10”
Great for Tile, Marble
and Granite
CC400T
Portable Hand Held
· 4-1/2” blade capacity
· 1/2 HP carbon brush motor
15 amp, 115V-60Hz
· Uses tile or turbo blades
· 20mm arbor
· Maximum 1-1/2” cutting
depth and 45o miter cuts
· Water sealed blade shaft
· Includes carrying case
CC600T Light Weight Tile Saw
· Light weight
· Up to 7” blade capacity (5/8” arbor)
· 3/4 HP carbon brush motor gives 6,000 RPM
at the blade shaft
· Rip cut up to 17”, diagonal cut to 12”
· Automatic thermal overload protection
prevents power surges and overheating
· Easy to clean water tray
· Liquid cooled bearing housing
· Includes 45o and 90o rip guide/miter block
CC900TE Economy Tile Saw
· Lighter, portable version of the CC900T
· 1-1/2 HP, 15amp, 115V high torque motor
· Plastic tray can be removed for cleaning
· Replaceable liquid cooled bearing housing
· Blade guard includes brush for additional
blade cooling protection and overspray
Sawing Equipment
TILE SAWS
Model #
Motor Type / Description
Part #
CC400T
CC600T
CC900TE
1/2 HP Hand Held Tile Saw
3/4 HP 7” Economy Tile Saw
1-1/2 HP 10” Economy Tile Saw
5800557PKG
5800558PKG
5800559PKG
Optional Folding Stand w/Workbench
Optional Floding Stand w/Wheels
6043305
6043528
Dimensions
List Price
Capacity Weight (lbs)
$178
65018 4-1/2”
7/17
9”L x 9”W x 7”H
574
65019
7”
43/53
33”L x 20”W x 16”H
872
65020
10”
98/108
39”L x 24”W x 24”H
Cat #
OPTIONS
80766
03734
$164
205
Accessories:
CC400T Accessory Kit
(included with saw, not sold
separately) Includes: water tube,
flange wrench and flange tightener
Tile Blades can be
Optional Folding Stand
with Workbench
Scissor stand that fits the
600T tile saw
206
Optional Folding Stand
with Wheels
Scissor stand that fits
the CC900TE, CC900T &
CC1000T tile saws
TILE SAWS
All Tile Saws Include
a Free Tile Blade
Up to 10”
Extra Wide
Cutting Table
Precision Cuts
CC900T Heavy Duty Tile Saw
CC1000T Heavy Duty Tile Saw
· 1-1/2 HP, 15amp, 115V high torque motor
· Solid, heavy duty steel frame
· Removable stainless steel water tray
· Cutting tray/cart uses ball bearing wheels for smooth
movement and accurate cutting
· Blade guard includes brush for additional blade cooling
protection and overspray
· 1-1/2 HP 15amp, 115V high torque motor
· Rigid, heavy duty steel frame
· Convenient carrying handles
· Cutting tray/cart uses ball bearing wheels for smooth
movement and accurate cutting
· Blade guard includes brush for additional blade cooling
protection and overspray
TILE SAWS
Model #
Motor Type / Description
CC900T
CC1000T
1-1/2 HP Heavy Duty Tile Saw
1-1/2 HP Super Duty Tile Saw
Cat #
OPTIONS
6030060
6043002
6043004
6043006
6043043
6043096
46817
57689
57691
57693
60885
81771
$81.61
37.04
68.02
51.02
113.00
68.96
Accessories:
180o Angle Guide
For CC900T & CC1000T tile saws
Side Extension Table
For the CC900TE tile saw
Water Pump
Included with all table top
tile saws (2.5 gpm)
Tile Blades can be
Miter Block
Included with all table
top tile saws
45o / 90o Rip Guide
For CC900TE & CC900T tile saws
207
Sawing Equipment
Water Pump
o
45 / 90o Rip Guide
180o Angle Guide
Side Extension Table
Miter Block CC900TE, CC900T, CC1000T
Miter Block CC600T
Dimensions
List Price
Capacity Weight (lbs)
$988
5800556PKG 56914
10”
111/130
39”L x 24”W x 24”H
5800572PKG 72483
10”
115/142
43”L x 26”W x 24”H 1,185
Part #
NOTES
RIG/MOTOR ICONS AND INFORMATION
On most rig and equipment pages you will find the elements shown below.
This describes the icon meanings and where to find specific information.
Rig/Motor Model Number
and Description
M-1 COMPLETE CORE RIGS
10”
Bit Size or Capacity
Page Color Codes
ORANGE
BLACK
SAWING
DRILLING
EQUIPMENT EQUIPMENT
CORE RIG POWER ICONS:
4 ELEMENTS OF EFFECTIVE DRILLING: W.A.S.P.
Water
When drilling with a wet core bit, one of the most important factors is water. Many drillers misleadingly think the
more water used, the better. As the diamonds work on grinding away the concrete, water helps form a concrete
‘soup’ called slurry that actually helps the grinding process by keeping the diamonds exposed. If there is not enough
water, there isn’t anything to create the slurry and the diamonds will continue to grind the same particles. If there is
too much water, all of the concrete dust particles will wash away with nothing to help keep the diamonds exposed.
The best amount of water to use is when you see the slurry look like heavily creamed coffee. This consistency
proves to be the most effective when wet core drilling.
Anchor
Proper rig anchoring is essential to insure a straight core. The best method of anchoring is using physical anchors
rated for core drilling. Using a base vacuum is fine as long as the surface is smooth and the vacuum gasket is in
good shape. It is never recommended to vacuum a rig to a wall due to unreliable job site power. Many rigs also
have a ceiling jack that allows the driller to shore the top of the mast up to an overhead area with a sturdy piece of
wood. Never stand on a rig to hold it down. This is an unsafe practice. Standing on a rig causes a ‘ribbing’ effect on
the core and will eventually cause the bit to bind up in the hole.
Speed
Setting your motor at the correct R.P.M. could mean the difference between grinding properly and glazing the
diamond segments. Every core bit should be run at the proper R.P.M. The smaller the bit, the faster the R.P.M.
should be set. These ratings are standard with almost all manufacturers and many core drills have multiple settings
so you can use different size core bits on the rig. (see page 31 for core bit RPM charts)
Power
In order to maintain the correct R.P.M., you need the power to do the job. The majority of core drills out there are
electric powered. It is best to use an amp meter when electric drilling to monitor the gauge and ensure you do
not cause a loss of productivity. Keeping the motor bogged-down and the gauge in the red can wear the internal
components of your electric drill motor. Also, insufficient power can rob the core bit of its R.P.M. and the ability of the
diamonds from being exposed. This can also be said when drilling with a hydraulic motor. It is important to maintain
the correct gallons per minute to ensure the correct R.P.M.
M1AA-15 PORTABLE CORE RIG
up to
6”
Convenience and Durability
in a Light Weight Core Rig
Features:
Benefits:
· 6 inch bit capacity (anchor), 3” bit capacity (with APV base)
· Weighs only 35 lbs.
· 120V - 15 amp, 3.5 HP Core Bore motor
· Single speed - 800 RPM
· Spring loaded slide handle for easy coring
· Convenient carrying handle on carriage
· Built-in LED light amp meter
· Includes water trap ring
· Easy to use for standard hole drilling
· Light weight and portable
· Uses standard power outlets
· Small compact unit for precise coring
· No separate amp meter box
· Trap ring keeps water contained
· Lower cost alternative to larger rigs
D
Water Trap Ring
(Included with rig)
Allows basic water containment
Part # 2704100, Cat # 95186
List Price: $112
Also Includes:
36mm wrench Part # 2704103, Cat # 96047
List Price: $36.13
48mm wrench Part # 2704104, Cat # 95631
List Price: $36.13
A
C
F
B
(width)
E
Dimensions:
A.30”
B.15”
C.6-5/8”
D.21”
E.5-1/4”
F.8-1/2”
Location to drill anchor hole = 9-1/2”
Measured from the center of the
motor spindle to the center of the
anchor/vacuum slot on base
Bit not included
M1AA-15 with APV base
(all purpose vacuum)
M1AA-15 PORTABLE DRILL RIG
Model #
Uncrated/Crated List Price
Weight (lbs.)
Description/Motor
MotorRPM
Part #
Cat #
M1AA-15
Anchor rig / 15 Amp Core Bore
800
4220050
85986
35/45
$1,233
M1AA-15
Complete rig with add-on vacuum base
and vacuum pump / 15 amp Core Bore
800
4220058
87078
80/90
1,811
211
Coring Equipment
Vacuum base add-on with vacuum pump
allows you to use the M1AA-15 anchor
rig as a vacuum rig
All purpose vacuum base add-on only:
Part # 4247075, Cat # 01818
List Price: $312
Vacuum pump only:
Part # 4244078, Cat # 01771
List Price: $368
M-1 COMPLETE CORE RIGS
10”
up to 14” with spacer*)
Our Best Selling Core Rig!
Features:
*Spacer blocks
are found on
page 236
· 2-1/2” square column (mast) with
black oxidized finish
· 6” wheels for easy mobility
Benefits:
· Slide handle allows for drilling in
tight areas
· Combination base is a quick
change over from vacuum to
anchor base
· Dual switch/outlet control panel
with amp meter (except for CB700
models with LED amp meter)
· Great for the general
contractor or pro contractor
· Vacuum pump for quick mounting
to flat surface without drilling an
anchor hole
(included with combination rig)
M-1 Complete
Combination
Rig with CB748
motor
M-1 Complete
Anchor Rig with
Milwaukee motor
· 4 leveling screws on the base
· Ceiling jack helps keep the rig
in place as a backup for
anchoring or vacuuming the base
down (used with a brace
piece - 2 x 4 or other material)
· Up to 14” bit capacity
with one spacer
block
COMPLETE M-1 COMBINATION DRILL RIGS WITH VACUUM PUMP
Model #
Motor
Motor RPM
M1C-20-CB-V
M1C-20-CB700-V
M1C-20-MW4004-V
M1C-20-MW4096-V
M1C-20-MW4005-V
M1C-15-MW4097-V
M1C-23-DK22-V
M1C-23-DK22S-V
20 Amp Core Bore CB748
20 Amp Milwaukee
20 Amp Milwaukee
20 Amp Milwaukee
15 Amp Milwaukee
23 Amp Weka DK22
23 Amp Weka DK22S
350/900
400/930
300/600
450/900
600/1200
500/1000
550/1120/1680
800/1640/2430
M1C-20-CB
M1C-20-CB700
M1C-20-MW4004
M1C-20-MW4096
M1C-20-MW4005
M1C-15-MW4097
M1C-23-DK22
M1C-23-DK22S
20 Amp Milwaukee
20 Amp Milwaukee
20 Amp Milwaukee
15 Amp Milwaukee
23 Amp Weka DK22
23 Amp Weka DK22S
M1A-20-CB
M1A-20-CB700
M1A-20-MW4004
M1A-20-MW4096
M1A-20-MW4005
M1A-15-MW4097
M1A-23-DK22
M1A-23-DK22S
20 Amp Milwaukee
20 Amp Milwaukee
20 Amp Milwaukee
15 Amp Milwaukee
23 Amp Weka DK22
23 Amp Weka DK22S
Combo Rig
Part #
4245055
4245099
4245048
4245059
4245049
4245051
4245053
4245046
Cat #
01789
30076
01784
01794
01785
01787
47173
50138
Uncrated/Crated
List Price
Weight (lbs.)
129/140
$3,224
129/140
2,842
129/140
2,991
129/140
2,991
129/140
2,991
129/140
2,919
117/135
4,207
117/135
4,208
Coring Equipment
COMPLETE M-1 COMBINATION DRILL RIGS WITHOUT VACUUM PUMP
350/900
400/930
300/600
450/900
600/1200
500/1000
550/1120/1680
800/1640/2430
4245071
4245100
4245072
4245073
4245074
4245075
4245077
4245078
65862
30077
75375
67092
74708
70125
71962
72583
114/120
114/120
108/114
108/114
108/114
108/114
107/113
107/113
$2,862
2,206
2,641
2,641
2,641
2,568
3,860
3,860
01774
30070
47162
01776
01782
01780
52339
66795
98/104
98/104
91/97
91/97
91/97
91/97
95/100
95/100
$2,724
2,086
2,506
2,506
2,506
2,434
3,725
3,725
COMPLETE M-1 ANCHOR DRILL RIGS
CB700 Rigs do not include a control panel.
CB700 has a built-in amp meter.
350/900
400/930
300/600
450/900
600/1200
500/1000
550/1120/1680
800/1640/2430
212
4245001
4245098
4245009
4245003
4245010
4245006
4245008
4245011
New and Improved
Vacuum Seal Retention
Keeps Vacuum Gasket
Held Into the Base Longer
for a Durable Seal
Parts List: #1801636
Angle Combination
Stand Only
(42” mast)
Part # 4245062
Cat # 01799
List Price:$1,047
Standard Combination Stand Only
(42” mast)
Part # 4245065, Cat # 01801, List Price:$864
Special Combo Stand
for Milwaukee motors (42” mast)
Part # 4241213, Cat # 55248, List Price:$1,454
Angle Anchor
Stand Only
(42” mast)
Part # 4246070
Cat # 01809
List Price: $921
Standard Anchor
Stand Only
(42” mast)
Part # 4246055
Cat # 01806
List Price: $729
Drill stand only includes: base, column (mast),
carriage, ceiling jack, motor mount plate and wheels
Over a Thousand Different Ways to
Build Your Custom Rig!
Complete combination rig includes: combo anchor/
vacuum base, drill motor, column (mast),
carriage, motor mount, control panel, vacuum pump,
vacuum gasket, ceiling jack and wheel kit
Complete anchor rig includes: small anchor base,
drill motor, motor mount, column (mast),
carriage, control panel, ceiling jack and wheel kit
Custom Combination Rig Components:
Combo drill stand, Drill motor (pages 227-230),
optional control panel (page 236) and optional
vacuum pump (page 236)
Custom Anchor Rig Components:
Anchor drill stand, drill motor (pages 227-230)
and optional control panel (page 236)
M-1 Combination Rig Dimensions:
A.45”
B.24-1/2”
C.5-1/8”(CB748)
5-1/2” (Milw.) D.2-1/2” square
E.19”
F.23-1/4”
G.13-1/2” width
H.29-1/4”
Location to drill anchor hole = 12”
Measured from the center of the motor
spindle to the center of the anchor/
vacuum slot on base
Don’t forget to ask about our
3 Year Gold Extended Warranty
on new electric core rigs!
See page 246 for more information
on extended warranties
213
5 Year Platinum Extended Warranty
Coring Equipment
M-1 Anchor Rig Dimensions:
A.44”
B.24-1/2”
C.5-1/8”(CB748)
5-1/2” (Milw.)
D.2-1/2” square
E.11”
F.16”
G.6” width
H.23-3/4”
M-2 HEAVY DUTY CORE RIGS
10”
(up to 36” with spacer
& hydraulic motor*)
Features:
· Dual switch/outlet control panel
Benefits:
· Heavy duty rig for larger jobs
The #1 Pro
Rig in the
U.S.A.
· 4-spoke handle
· 2-7/8” precision made, chrome
· Larger mast to withstand
high torque and large
diameter bits
· The 4-spoke handle allows
plated square column (mast)
the operator to easily
apply feed pressure
*Spacer blocks
are found on
page 236
· Vacuum pump for
quick mounting to
flat surface without
drilling an anchor hole
(Included with combination rig)
· Great for the professional
driller
M-2 Complete
Combo Rig
with CB748
motor
· 10” bit capacity (up to 36” with
spacer block or pillow block
and hydraulic motor)
· Roller carriage available for
M-2 Complete
Anchor Rig with
Weka motor
more precise drilling, which in
turn promotes longer life on
diamonds.
· 6” wheels for easy
· Combo base is a quick
change over from vacuum
to anchor base
mobility
· 4 Leveling Screws
on base
COMPLETE M-2 COMBINATION DRILL RIGS WITH VACUUM PUMP
Uncrated/Crated
Weight (lbs.)
141/148
145/152
139/146
139/146
139/146
139/146
137/144
137/144
Model #
Motor
Motor RPM
Part #
Cat #
List Price
M2C-20-CB-V
M2C-20-CB700-V
M2C-20-MW4004-V
M2C-20-MW4096-V
M2C-20-MW4005-V
M2C-15-MW4097-V
M2C-23-DK22-V
M2C-23-DK22S-V
20 Amp Milwaukee
20 Amp Milwaukee
20 Amp Milwaukee
15 Amp Milwaukee
23 Amp Weka DK22
23 Amp Weka DK22S
350/900
400/930
300/600
450/900
600/1200
500/1000
550/1120/1680
800/1640/2430
4241050
4241164
4241048
4241059
4241049
4241051
4241068
4241069
01696
30117
01694
01704
01695
59573
47426
50007
M2C-20-CB
M2C-20-CB700
M2C-20-MW4004
M2C-20-MW4096
M2C-20-MW4005
M2C-15-MW4097
M2C-23-DK22
M2C-23-DK22S
20 Amp Milwaukee
20 Amp Milwaukee
20 Amp Milwaukee
15 Amp Milwaukee
23 Amp Weka DK22
23 Amp Weka DK22S
350/900
400/930
300/600
450/900
600/1200
500/1000
550/1120/1680
800/1640/2430
4241082
4241166
4241083
4241084
4241085
4241086
4241088
4241089
71149
30152
76314
75479
69558
76984
73291
75275
67/70
67/70
124/131
124/131
124/131
124/131
120/128
120/128
3,268
2,585
3,035
3,035
3,035
2,962
4,254
4,254
M2A-20-CB
M2A-20-CB700
M2A-20-MW4004
M2A-20-MW4096
M2A-20-MW4005
M2A-15-MW4097
M2A-23-DK22
M2A-23-DK22S
20 Amp Milwaukee
20 Amp Milwaukee
20 Amp Milwaukee
15 Amp Milwaukee
23 Amp Weka DK22
23 Amp Weka DK22S
350/900
400/930
300/600
450/900
600/1200
500/1000
550/1120/1680
800/1640/2430
4241001
4241163
4241009
4241003
4241010
4241006
4241008
4241011
01686
30098
01692
01687
01693
01689
01691
52247
120/127
400/930
114/120
114/120
114/120
114/120
114/120
114/120
3,113
2,445
2,884
2,884
2,884
2,812
4,103
4,103
$3,629
3,322
3,385
3,385
3,385
3,313
4,601
4,601
Coring Equipment
COMPLETE M-2 COMBINATION DRILL RIGS WITHOUT VACUUM PUMP
COMPLETE M-2 ANCHOR DRILL RIGS
214
New and Improved
Vacuum Seal
Retention Keeps
Vacuum Gasket Held
Into the Base Longer
for a Durable Seal
Angle Combination
Stand Only
Combination
Stand Only
Large Base Anchor
Stand Only
Angle Anchor
Stand Only
Anchor
Stand Only
(42” mast)
Part # 4241056
Cat # 01702
List Price: $1,603
(42” mast)
Part # 4241055
Cat # 01700
List Price: $1,258
(42” mast)
Part # 4241064
Cat # 01708
List Price: $1,258
(42” mast)
Part # 4241110
Cat # 01717
List Price: $1,448
(42” mast)
Part # 4241100
Cat # 01714
List Price: $1,108
Upgrade your slide carriage to a heavy duty roller carriage
which lasts longer and gives precision movement
M-2 Roller Carriage Upgrade (ordered with new rig)
Part # 4241000, Cat # 01684, List Price: $227
M-2 Roller Carriage (for existing rigs)
Part # 4277531, Cat # 01844, List Price: $875
Drill Stand Only includes: base, column (mast),
carriage, ceiling jack, motor mount plate and wheels
Complete Combination Rig includes: combo anchor/
vacuum base, drill motor, column (mast), motor mount,
carriage, control panel, vacuum pump,
Complete Anchor Rig includes: small anchor base,
drill motor, column (mast), carriage, control panel,
ceiling jack and wheel kit
optional control panel (page 236) and optional
vacuum pump (page 236)
M-2 Large Anchor Rig
Dimensions:
A.44-1/2”
B.22-1/2”(CB748)
24-3/4” (Milw.)
C.5-1/2”
D.2-7/8”(square)
E.18-1/2”
F.20-3/4”
G.15-1/4”
H.27-1/2”
Location to drill anchor hole =
12-1/2” Measured from the center
of the motor spindle to the center
of the anchor/vacuum slot on base
215
M-2 Combination Rig
Dimensions:
A.44-3/4”
B.22-3/4”
C.5-1/2”
D.2-7/8”(square)
E.19-1/4”
F.23-1/4”
G.13-1/2”
H.29”
Coring Equipment
M-2 Anchor Rig
Dimensions:
A.
44-1/4”
B.22-1/4”
C.5-1/2”
D.2-7/8”(square)
E.
12-1/2”
F. 17-3/4”
G.
7”
H.
24”
M-3 LIGHTWEIGHT STAIR RIG
6” mounted
3” hand-held
Light Weight & Economical
Benefits:
· Light weight and economical
Features:
· Slide handle permits drilling in
tight areas
· Single switch outlet control panel
· 1-1/2” square column (mast) with
black oxidized finish
· Swivel masts can turn 360o for
easy drilling on stairs
· Compact size for hard-to-reach
drilling areas
Part #
4247405
· Swivel base and mast
· Slide handle
· Ceiling jack
Bit not
included
· 4 leveling screws on the base
· Wheel kit on anchor models
· Ceiling jack helps keep the rig in
place as a backup for anchoring or
vacuuming the base down
(used with a brace piece - 2x4 or
other material)
· Weka models allow the motor to
be unmounted and used hand-held
M-3 COMBINATION DRILL RIGS WITH VACUUM PUMP
MODEL #
MOTOR
RPM
M3C-14-DK12-V
14 Amp Weka DK12
970/2330/4400
M3C-14-DK13-V
14 Amp Weka DK13
970/2330/4400
M3C-15-MW4097-V
15 Amp Milwaukee
500/1000
M3C-20-CB-V
20 Amp Core Bore
350/900
M3C-20-CB700-V 20 Amp Core Bore CB700
400/930
M3C-20-MW4004-V
20 Amp Milwaukee
300/600
M3C-20-MW4096-V
20 Amp Milwaukee
450/900
M3C-20-MW4005-V
20 Amp Milwaukee
600/1200
COMBO RIG
PART #
CAT #
Uncrated/Crated
List Price
Weight (lbs.)
4247405
4247406
4247435
4247525
4247013
4247538
4247530
4247539
01819
87271
01820
01821
30190
10165
54220
01822
84/89
84/89
90/95
90/95
90/95
90/95
90/95
90/95
$3,201
3,675
2,746
3,045
2,678
2,818
2,818
2,818
Coring Equipment
M-3 COMBINATION DRILL RIGS WITHOUT VACUUM PUMP
M3C-14-DK12
M3C-15-MW4097
M3C-20-CB
M3C-20-CB700
M3C-20-MW4004
M3C-20-MW4096
M3C-20-MW4005
14 Amp Weka DK12
970/2330/4400
15 Amp Milwaukee
500/1000
20 Amp Core Bore
350/900
400/930
20 Amp Milwaukee
300/600
20 Amp Milwaukee
450/900
20 Amp Milwaukee
600/1200
4247437
4247438
4247440
4247012
4247441
4247442
4247443
76919
65890
87074
30181
10166
70581
10168
63/66
63/66
68/74
68/74
68/74
68/74
68/74
2,822
2,394
2,650
2,058
2,435
2,435
2,435
M3A-14-DK12
M3A-15-MW4097
M3A-20-CB
M3A-20-CB700
M3A-20-MW4004
M3A-20-MW4096
M3A-20-MW4005
14 Amp Weka DK12
970/2330/4400
15 Amp Milwaukee
500/1000
20 Amp Core Bore
350/900
400/930
20 Amp Milwaukee
300/600
20 Amp Milwaukee
450/900
20 Amp Milwaukee
600/1200
4247001
4247003
4247005
4247011
4247009
4247008
4247010
01811
01813
01815
30171
49990
47280
01817
68/72
68/72
70/76
70/76
70/76
70/76
70/76
2,774
2,324
2,611
2,023
2,396
2,396
2,396
M-3 ANCHOR DRILL RIGS
216
The Weka DK12 & DK13
M-3 Models Allow You to
Remove the Motor To Use in
Hand-Held Applications!
New and Improved
Vacuum Seal Retention
Keeps Vacuum Gasket
Held Into the Base
Longer for a Durable
Seal
Combination Stand Only
with 360o swivel mast
(30” overall length mast)
Part # 4247546
Cat # 01825
List Price: $679
Up to 3” Bit Capacity When
Used Hand Held
with 360o swivel mast
For Weka Motors
Anchor Stand Only
Anchor Stand Only
(34” mast)
For Weka Motors
(34” mast)
Part # 4247540
Cat # 01823
List Price: $642
(30” overall length mast)
Part # 4247547
Cat # 49709
List Price: $685
Part # 4247541
Cat # 48110
List Price: $636
Drill stand only includes: base, column (mast),
carriage, ceiling jack and motor mount plate
Complete combination rig includes: combo anchor/vacuum
base, drill motor, column (mast), motor mount,
carriage, control panel, vacuum pump
vacuum gasket and ceiling jack
Complete anchor rig includes: small anchor base,
drill motor, column (mast), carriage, motor mount, control panel,
optional control panel (page 236) and
optional vacuum pump (page 236)
A.35-1/2”
B.29-3/8”
C.4-5/8”
D.1-1/2”(square)
E.12”
F.8”
G.
1-1/2”
spindle to the center of the anchor/vacuum
slot on base
G
217
Coring Equipment
A.35-1/2”
B.29-3/8”
C.4-5/8”
D.1-1/2”(square)
E.10”
F.6-3/4”
M-4 MULTI-PURPOSE CORE RIG
6” mounted
3” hand-held
Great Versatility in a
Light Weight Rig
Benefits:
Features:
· Light weight and portable
· Reversible slide handle
(for use on left or right side)
· Combo bases have angle
braces for drilling up to 45o
· High strength, hard anodized
1-5/8” x 2” aluminum column
· Top carrying handle
(Ceiling jack available)
· 4 adjustable slide bearings
provide superior carriage
rigidity
· Great for the general
contractor (basic drilling) or
plumber (hand-held drilling)
· Quick release motor mount
· Carriage lock
· Leveling bolts on all
model bases
· Quick change over from
vacuum to anchor base
· Hand-held option
· 4 Leveling screws on base
Bits not included
Complete combination rig includes:
combo anchor/vacuum base, drill motor,
column (mast), carriage, and vacuum pump
Combo drill stand, drill motor (pages 227230), optional control panel (page 236) and
optional vacuum pump (page 236)
M-4 COMPLETE COMBINATION DRILL RIGS WITH VACUUM PUMP
Model #
Motor
RPM
Part #
Cat #
M4C-14-DK12-V
14 Amp Weka DK12
M4C-14-DK13-V
14 Amp Weka DK13
M4C-18-DK16-V
18 Amp Weka DK16
M4C-15-MW4097-V
15 Amp Milwaukee
M4C-20-MW4004-V
20 Amp Milwaukee
M4C-20-MW4096-V
20 Amp Milwaukee
M4C-20-MW4005-V
20 Amp Milwaukee
M4C-7-DK12-V 7 Amp Weka DK12 (230V)
970/2330/4400
970/2330/4400
900/1900/3900
500/1000
300/600
450/900
600/1200
970/2330/4400
4240001
4240044
4240054
4240002
4240004
4240005
4240006
4240009
00020
51033
98393
01677
46815
01678
01679
60114
M4C-14-DK12
14 Amp Weka DK12
M4C-14-DK13
14 Amp Weka DK13
M4C-18-DK16
18 Amp Weka DK16
M4C-15-MW4097
15 Amp Milwaukee
M4C-20-MW4004
20 Amp Milwaukee
M4C-20-MW4096
20 Amp Milwaukee
M4C-20-MW4005
20 Amp Milwaukee
M4C-7-DK12
7 Amp Weka Dk12 (230V)
970/2330/4400
970/2330/4400
900/1900/3900
500/1000
300/600
450/900
600/1200
970/2330/4400
4240046
4240047
4240057
4240048
4240050
4240051
4240052
4240053
66489
66975
08871
68601
89951
72631
76402
10169
Uncrated/Crated
List Price
Weight (lbs.)
74/78
$3,171
74/78
3,377
74/78
3,407
85/90
2,805
85/90
2,874
85/90
2,874
85/90
2,874
74/78
3,598
Coring Equipment
M-4 COMPLETE COMBINATION DRILL RIGS WITHOUT VACUUM PUMP
218
67/72
67/72
67/72
68/72
68/72
68/72
68/72
66/70
2,787
2,993
2,987
2,420
2,490
2,490
2,490
3,214
New and Improved
Vacuum Seal
Retention Keeps
Vacuum Gasket Held
for a Durable Seal
Anchor Stand Only
for Weka Motor (30” mast)
Part # 4240024, Cat # 47074
List Price: $710
for Milwaukee Motor (30” mast)
Part # 4240027, Cat # 47860
List Price: $710
Part # 4240022, Cat # 47885
List Price: $942
Part # 4240026, Cat # 47564
List Price:$ 942
Swivel masts
can be rotated
3600
Part # 4240020, Cat # 01680
List Price: $867
Part # 4240025, Cat # 01683
List Price: $867
Swivel Combo Stand Only
Part # 4240028, Cat # 47778
List Price: $747
Part # 4240029, Cat # 59343
List Price: $747
Over a Thousand Different Ways to Build Your Custom Rig!
Complete anchor rig includes:
small anchor base, drill motor, column
(mast), carriage, control panel,
ceiling jack and wheel kit
Drill stand only includes:
base, column (mast), carriage,
ceiling jack motor mount,
vacuum gasket and wheels
Anchor drill stand, drill motor
(pages 227-230) and optional
control panel (page 236)
M-4 COMPLETE ANCHOR DRILL RIGS
Model #
Motor
RPM
Part #
Cat #
970/2330/4400
970/2330/4400
900/1900/3900
500/1000
300/600
450/900
600/1200
970/2330/4400
4240010
4240045
4240055
4240011
4240013
4240014
4240015
4240016
46871
61221
98683
48859
69636
52505
58320
87938
M4S-14-DK12
14 Amp Weka DK12
580/1400/2900
M4S-14-DK16
18 Amp Weka Dk16
900/1900/3900
M4S-15-MW4097
15 Amp Milwaukee
500/1000
M4S-20-MW4004
20 Amp Milwaukee
300/600
M4S-20-MW4096
20 Amp Milwaukee
450/900
M4S-20-MW4005
20 Amp Milwaukee
600/1200
M4S-7-DK12
7 Amp Weka DK12 (230V) 970/2330/4400
4240030
4240056
4240031
4240033
4240034
4240035
4240036
46983
98684
80917
10170
68389
93513
76985
M4A-14-DK12
14 Amp Weka DK12
M4A-14-DK13
14 Amp Weka DK13 Dry
M4A-18-DK16
18 Amp Weka DK16
M4A-15-MW4097
15 Amp Milwaukee
M4A-20-MW4004
20 Amp Milwaukee
M4A-20-MW4096
20 Amp Milwaukee
M4A-20-MW4005
20 Amp Milwaukee
M4A-7-DK12
7 Amp Weka DK12 (230V)
M-4 COMPLETE SWIVEL DRILL RIGS
Uncrated/Crated
List Price
Weight (lbs.)
67/71
$2,629
67/71
2,871
70/74
2,909
53/55
2,263
53/55
2,332
53/55
2,332
53/55
2,332
68/70
3,057
76/80
76/80
84/89
84/89
84/89
84/89
80/85
3,050
3,285
2,687
2,752
2,752
2,752
3,545
(combo rig), 9-1/4” (anchor rig)
slot on base
The hand-held motor quick
release allows you to take the
motor out and use hand-held.
(Weka models only)
219
Coring Equipment
A.33-1/8”
B.20-3/4”
C.
7-7/8”
D.22-1/4”
E.3-5/8”
F.16-7/8”
M-5 EXTRA DUTY CORE RIG
12”
(up to 20” with spacer
& electric or hydraulic motor*)
Features:
Benefits:
· Quick release motor mount
· 4-spoke sliding handle (can
be used on right or left)
· Positive carriage lock
· 2-1/2” x 3” extruded
aluminum light weight
column (mast) that is hard
anodized to prevent wear
· Quick release vacuum button
· Top carrying handle
(ceiling jack available)
· Quick motor mount
release
· Large bit capacity in a
smaller rig system
· Allows for mounting
hydraulic motors
· Angle stand to drill up
to 45o
· Double column support for
increased stability
· Easily adjustable slide
bearings
Bits not
included
Parts List:
#1801636
*Spacer blocks are
found on page 236
Special plate needed for
hydraulic motor
THE LIGHTEST BIG RIG ON THE MARKET!
M-5 COMBINATION DRILL RIGS WITH VACUUM PUMP
Model #
Motor
Motor RPM
M5C-23-DK22-V
23 Amp Weka DK22
550/1120/1680
M5C-23-DK22S-V
23 Amp Weka DK22S
800/1640/2430
M5C-20-CB-V
20 Amp Core Bore
350/900
M5C-20-CB700-V
400/930
M5C-20-MW4004-V
20 Amp Milwaukee
300/600
M5C-20-MW4096-V
20 Amp Milwaukee
450/900
M5C-20-MW4005-V
20 Amp Milwaukee
600/1200
M5C-15-MW4097-V
15 Amp Milwaukee
500/1000
M5C-11-DK22-V
11 Amp Weka DK22 (230V) 550/1120/1680
M5C-11-DK22S-V 11 Amp Weka DK22S (230V) 800/1640/2430
Part #
Cat #
4220001
4220002
4220003
4220084
4220005
4220006
4220007
4220009
4220010
4220011
47175
49581
47171
30210
59637
47172
69870
56171
62089
49825
Uncrated/Crated
Weight (lbs.)
118/124
118/124
119/126
119/126
119/126
119/126
119/126
119/126
114/120
114/120
4220017
4220018
4220019
4220085
4220020
4220021
4220022
4220024
4220025
4220026
70410
70564
66367
30211
66833
70023
74223
72396
10187
84682
105/111
105/111
105/111
105/111
99/105
99/105
99/105
99/105
98/104
98/104
Coring Equipment
M-5 COMBINATION DRILL RIGS WITHOUT VACUUM PUMP
M5C-23-DK22
M5C-23-DK22S
M5C-20-CB
M5C-20-CB700
M5C-20-MW4004
M5C-20-MW4096
M5C-20-MW4005
M5C-15-MW4097
M5C-11-DK22
M5C-11-DK22S
23 Amp Weka DK22
550/1120/1680
23 Amp Weka DK22S
800/1640/2430
20 Amp Core Bore
350/900
400/930
20 Amp Milwaukee
300/600
20 Amp Milwaukee
450/900
20 Amp Milwaukee
600/1200
15 Amp Milwaukee
500/1000
11 Amp Weka DK22 (230V) 550/1120/1680
11 Amp Weka DK22S (230V) 800/1640/2430
CB700 Rigs do not include a control panel. The CB700 has a built-in amp meter.
220
List Price
$4,737
4,592
3,619
3,055
3,377
3,377
3,377
3,304
4,703
4,703
4,250
4,250
3,264
2,638
3,031
3,031
3,031
2,959
4,293
4,293
The M-5 has a quick
disconnect motor mount
that makes it easy to
remove the motor
New and Improved
Vacuum Seal
Retention Keeps
Vacuum Gasket Held
for a Durable Seal
Anchor Stand Only (40” mast)
Part # 4220080, Cat # 46987
List Price: $1,126
Part # 4220082, Cat # 59150
List Price: $1,214
Part # 4220081, Cat # 58402
List Price: $1,302
Combo Angle Stand Only
(40” mast) Part # 4220030 Cat # 46894, List Price: $1,276
See Page 237
For Quick
Disconnect
Outriggers!
Complete combination rig includes:
Complete anchor rig includes:
combo anchor/vacuum base, drill motor, column
small anchor base, drill motor, column
(mast), carriage, motor mount, control panel,
(mast), carriage, control panel and wheel kit
vacuum gasket, vacuum pump and wheel kit
Drill stand only includes:
base, column (mast),
carriage, motor mount plate
and wheels
Combo drill stand, drill motor (page 227-230)
optional control panel (page 236), optional vacuum
pump (page 236 and longer masts (Page 234)
Anchor drill stand, drill motor (pages 227230) and optional control panel (page 236)
M-5 ANCHOR DRILL RIGS
Model #
Motor
Motor RPM
Part #
Cat #
Uncrated/Crated
Weight (lbs.)
List Price
M5A-23-DK22
23 Amp Weka DK22
550/1120/1680
4220051
47688
87/92
$4,100
M5A-23-DK22S
23 Amp Weka DK22S
800/1640/2430
4220052
66630
87/92
4,100
M5A-20-CB
20 Amp Core Bore
350/900
4220053
49597
91/96
3,110
M5A-20-CB700
400/930
4220086
30236
91/96
2,480
M5A-20-MW4004
20 Amp Milwaukee
300/600
4220055
72845
91/96
2,881
M5A-20-MW4096
20 Amp Milwaukee
450/900
4220056
57905
91/96
2,881
M5A-20-MW4005
20 Amp Milwaukee
600/1200
4220057
47176
91/96
2,881
M5A-15-MW4097
15 Amp Milwaukee
500/1000
4220059
10190
91/96
2,809
11 Amp Weka DK22 (230V) 550/1120/1680
4220060
54577
86/93
4,143
M5A-11-DK22S 11 Amp Weka Dk22S (230V) 800/1640/2430
4220061
70390
86/93
4,143
M5A-11-DK22
CB700 Rigs do not include a control panel. The CB700 has a built-in amp meter.
A.42-1/2”
B.32-3/4”
C.12-1/2”
D.25-1/2”
E.6-1/2”
F.26-1/4”
slot on base
slot on base
221
Coring Equipment
A.42-1/2”
B.29-1/4”
C.9-1/2”
D.25-1/2”
E.6-1/2”
F.21-3/4”
M-6 LARGE HYDRAULIC CORE RIG
Up to
72”
Makes Drilling Large
Diameter Holes
Faster and Safer
Features:
Benefits:
· 18” bit capacity with standard pillow block.
Add-on 4”x6” steel tube spacers available
for drilling up to 72” diameter holes.
· The large size and heavy duty
construction makes the M-6 a
safer way to drill with large
diameter core bits
· Heavy duty 15” x 12” roller carriage
· Massive 72” tall, 4” x 6” rectangular mast
· Sold as a stand only so you can
create your own system for
your applications
· Sturdy cast aluminum base
(steel base optional)
· 2:1 gear reduction makes lifting
larger bits easy
· 4-spoke handles
· Wheel kit and leveling bolts
Parts List: 1800844
· 6” rubber wheels on stand
base
The M-6 Uses Hydraulic Motors, Pillow Blocks and Flow Control Valves
See Pages 232-233 for Hydraulic Components and Drilling Accessories
Coring Equipment
M-6 DRILL STANDS ONLY
Description
Part #
Cat #
Uncrated/Crated
Weight (lbs.)
List Price
Large anchor stand with wheels, and quick disconnect
motor mount plate
4277581
47879
175/185
$3,393
M-6 steel anchor base
4640083
78638
138/146
926
*Spacer blocks are found on page 223 & 236
222
Optional Steel Base Assembly
M-6 Heavy Duty Roller Carriage
Part # 4640083, Cat # 78638, List Price:
Includes: base, wheels, leveling bolts and hardware
Base only: Part # 4640088, Cat # 56429, List Price: $679
with cam lock quick disconnect 1:1 and 1:2 rack &
pinion design and roller adjusters
Part # 4640114, Cat # 00973, List Price: $2,036
(included with M-6 stand only)
Pillow Block
Spacer Block
M-6 Pillow Block
for hydraulic motors - see pages 184-185 for options
M-6 Spacer Blocks
M-6 Autofeed QD Carriage Assembly
with cam lock quick disconnect
Part # 4640115, Cat # 14951, List Price: $3,842
up to 36” capacity - Part # 4640026, Cat # 47072, List Price: $135
up to 48” capacity - Part # 4640025, Cat # 47073, List Price: $148
M-6 Stand Dimensions:
Height:72”
(your choice)90”
120”
See Page 63 for large diameter core bits
223
Coring Equipment
Length:23”
Width:
19”
(wheel to wheel)
ULTIMATE DRILLING MACHINE
4” to 24”
FITS THROUGH A
STANDARD DOOR
FRAME!
Increase Your Drilling
Profitability
· 5,000 watts electric
power supply
· Hydraulic power supply
with flow control
· 115 volt and 230 volt twist locks
· 14 GPM maximum,
2,100 PSI maximum
· 115 volt ground fault interrupt
Features:
Benefits:
· Self propelled
· Honda GX670 engine with electric start
· 9 gallon fuel tank
· 44 gallon water tank for wet drilling
· Spot light and strobe light
· Power feed drill carriage
· Vacuum drill base
· Large bit capacity (up to 24”)
· Move the entire unit from hole to hole quickly
· Vacuum base - no anchor holes to drill
· Built-in tachometer allows you to monitor your drilling RPM
· Drill with ease without manually feeding the bit
U.D.M. - ULTIMATE DRILLING MACHINE
Description
Part #
Ultimate Drilling Machine
- mobile core rig with
4250025
electric and hydraulic
supply
Cat # List Price
03987
$35,395
Coring Equipment
90”
Dry Weight = 1,100 lbs.
Weight with full hydraulic oil tank = 1,200 lbs.
Weight with oil, gas & water = 1,600 lbs.
224
CORE BORE® CB700 DRILL MOTOR
14”
Features/Benefits:
· 20 amp, 120 volt, 2200 watt
electric Core Bore© motor
· 400/930 no load RPM
210/480 loaded RPM
· Built-in L.E.D. amp meter
Built-in L.E.D. Amp Meter
· Water connection for wet drilling
· Includes on/off switch/amp meter
· 1.250”-7 threaded spindle
· 2-year Warranty
Easy Speed Adjustment
CB700 Drill Motor and Core Rigs
Description
Part #
Cat #
List Price
CB700 MOTOR ONLY, 20 amp, 120 volt electric with LED amp meter
4244116
30062
$1,323
M-1 Complete Anchor Rig with CB700 Motor
4245098
30070
2,086
M-1 Complete Combination Rig with CB700 Motor
4245099
30076
2,842
M-1 Combo Rig with CB700 Motor - no vacuum pump
4245100
30077
2,206
M-1 Complete Combination Angle Rig with CB700 Motor
4245101
30078
3,146
M-1 Complete Combination Rig with CB700
4245102
30097
2,652
4241163
30098
2,445
4241164
30117
3,322
4241166
30152
2,585
4247011
30171
2,023
M-3 Combination Rig with CB700 Motor - no vacuum pump
4247012
30181
2,058
4247013
30190
2,678
4220084
30132
3,216
4220085
30211
2,638
4220086
30236
2,480
See individual rig pages for what is included with each rig
Part numbers shown do not include a separate control panel.
Amp meter and on/off switch are included on the motor itself.
225
Coring Equipment
CORE BORE® CB748 & Milwaukee DRILL MOTORS
*Up to 14”
*Depending on rig
CB748
HAS A 2-YEAR
WARRANTY
Milwaukee
MOTORS HAVE A
5-YEAR LIMITED
WARRANTY
Core Bore CB748
Milwaukee Motors
· 20 amp, 115 volt
· Available with or without on/off switch
· Water connection for garden hose when coring wet
· Slip clutch
· Includes open end wrench
Model 4004 - (4.8HP) Recommended Max Bit Size: 14”
Model 4097-20 - (2.5HP) Recommended Max Bit Size: 10”
· 20 amp, 115 volt
· Available with or without on/off switch
· Built-in water swivel and water control valve
· Slip clutch
· Includes open end wrench
CORE BORE and Milwaukee ELECTRIC DRILL MOTORS
Coring Equipment
Motor/Model #
Loaded
AMP
RPM
Part #
Cat #
Part #
Cat #
without
on/off
switch
without
on/off
switch
List
Price
with
on/off
switch
with Uncrated/Crated List
Weight (lbs.)
Price
on/off
switch
Core Bore CB748
20
350/900
4244000
01730
$1,761
4244005
01732
38/40
$1,800
Milwaukee Model 4004
20
300/600
4244032
01750
1,582
4244033
01751
24/31
1,671
20
450/900
4244038
01754
1,582
4244039
01755
24/31
1,671
20
600/1200
4244042
01758
1,582
4244043
01760
24/31
1,671
Milwaukee Model 4097-20
15
500/1000
4244030
01748
1,508
4244031
01749
26/30
1,600
See page 246 for more information on extended warranties
on new complete electric core rigs!
on new complete electric core rigs!
226
WEKA DRILL MOTORS
Various Bit Sizes
DK22
DK32
SR35
DK42
DK52
SR75S
·Heavy duty
·Water connection
·1.250”-7 threaded
spindle
·Recommended for bits
up 1”-12” Max 16”
·Heavy duty
·Water connection
spindle
2”-16” Max 18”
·9-Speed - 230V
·Water cooled with water
protection
·No carbon brushes and
rotating windings translate
into low maintenance
spindle
2”-18” Max 20”
·Heavy duty
·Water connection
spindle
3”-18” Max 20”
·Heavy duty
·Water connection
spindle
3”-20” Max 24”
·9-Speed - 480V
·Water cooled with water
protection
·No carbon brushes and
rotating windings translate
into low maintenance
·1.250”-7 threaded spindle
5”-24” Max 26”
Hilti QD to Weka Motor Mount
Part # 4648065, Cat # 88660
List Price: $329.00
WEKA ELECTRIC DRILL MOTORS
Motor/Model #
AMP
WEKA DK22
WEKA DK22
WEKA DK22L
WEKA DK22S
WEKA DK22S
WEKA DK32
WEKA DK32
23 (110V)
11 (230V)
23 (110V)
23 (110V)
11 (230V)
30 (110V)
15 (230V)
WEKA SR35
WEKA SR75
550/1120/1680
550/1120/1680
460/940/1400
800/1640/2430
800/1640/2430
230/480/720
230/480/720
(150/200/240)
16 (230V)
(300/390/470)
(470/610/730)
8.2 (460V-3PH)
220/460/690
14.2 (230V-3PH) 220/460/690
8.2 (460V-3PH) 320/660/1000
14.2 (230V-3PH) 320/660/1000
8.2 (460V-3PH)
180/380/570
14.2 (230V-3PH) 180/380/570
9 (460V-3PH)
170/340/520
18 (230V-3PH)
170/340/520
(90/180/280)
14 (480V-3PH) (125/250/395)
(155/305/475)
Hilti© is a copyright of Hilti Corporation and is in no way affiliated with Diamond Products Ltd.
Uncrated/Crated
List Price
Weight (lbs.)
31/33
$2,841
31/33
2,841
31/33
3,257
31/33
2,841
31/33
2,841
31/33
3,060
31/33
3,060
Loaded
RPM
Part #
Cat #
300/640/960
300/640/960
250/520/780
420/880/1300
420/880/1300
230/480/720
230/480/720
4244018
4244016
4244105
4244014
4244029
4244059
4244058
01741
47069
54872
47828
47070
46896
47071
200/390/610
4244064
79447
42/44
4,971
190/410/610
190/410/610
290/610/910
290/610/910
130/280/430
130/280/430
150/290/440
150/290/440
4244022
4244023
4244027
4244024
4244066
4244056
4244060
4244061
01743
01744
47641
01745
94768
91963
47119
48023
48/50
48/50
48/50
48/50
48/50
49/52
56/59
58/61
3,660
3,660
3,660
3,660
3,890
3,890
4,256
4,256
90/180/280
4244117
16537
50/55
6,259
227
All Weka motors include on/off switch
Coring Equipment
WEKA DK42
WEKA DK42
WEKA DK42S
WEKA DK42S
WEKA DK42AL
WEKA DK42AL
WEKA DK52
WEKA DK52
No Load RPM
WEKA HAND-HELD DRILL MOTORS
3”
Up to
hand-held
6” mounted
Carrying Case
Part # 2701483,
Cat # 47368
List Price: $103
WEKA DK12
WEKA DK13
· Thermal overload protection switch
· Side handle for stability
· Water connection for wet coring only
· 5/8”-11 or 1.250”-7 spindle
· Three speed for bits up to 3” (6” mounted)
· Includes carrying case and wrench
· Two leveling bubbles for accurate coring
· Thermal overload protection switch
· Side handle for stability
· Dust port and water connection for wet or dry coring
· 5/8”-11 or 1.250”-7 spindle
· Three speed for bits up to 3” (6” mounted)
· Includes carrying case and wrench
WEKA DK12 & DK13 HAND HELD MOTORS
Motor/Model #
AMP
No Load RPM
Loaded
RPM
Part #
Cat #
Uncrated/Crated
Weight (lbs.)
List Price
WEKA DK12 - Wet only
14
970/2330/4400
580/1400/2900
4244017
01738
25/27
$1,977
WEKA DK12 - Wet only
7 (230V)
970/2330/4400
580/1400/2900
4244013
54212
25/27
2,417
WEKA DK13 - Wet or Dry
14
970/2300/4400
580/1400/2900
4244062
47055
25/27
2,188
WEKA DK16
WEKA DK11
· Electronic overload system
Coring Equipment
· Special 3-thread spindle for removing bits quickly
WEKA DK11 & DK16 HAND-HELD MOTORS
Motor/Model #
AMP
No Load RPM
Loaded
RPM
Part #
Cat #
Uncrated/Crated
Weight (lbs.)
List Price
WEKA DK11
14 (110V)
8000
6500
4244063
78717
23/24
$2,187
WEKA DK16
18 (110V)
970/2300/4400
580/1400/2900
4244067
93678
23/24
2,220
228
CB500-HH HAND-HELD DRILL MOTOR
3”
Up to
hand-held
6” mounted
Easy, Low Cost Drilling
Shoulder Brace for
Increased Stability
Parts List #: 1801142
Features:
Benefits:
· 1300 Watt, 115 Volt electric motor
· Slip clutch
· Works with the M-4 stand and hand-held motor
mount
· 2-Speed gear box (1100 rpm and 2200 rpm)
· Shoulder brace for increased stability
· 5/8”-11 spindle and 1.250”-7 adapter
· Light weight and easy to use
· Water hose connection for wet drilling
· 1 year warranty against manufacturer defective parts
or workmanship
· 16” cord length
CORE BORE CB500-HH HAND-HELD DRILL MOTOR
Motor/Model #
AMP
No Load RPM
Part #
Cat #
Uncrated/Crated
Weight (lbs.)
List Price
CB500-HH
9 (115V)
1100/2200
4244004
66672
31/33
$646
Includes:
Plastic molded carrying case, side handle,
1.250”-7 adapter and wrench
229
Coring Equipment
Additional case only
Part # 2705617, Cat # 15585 - List Price: $145
HYDRAULIC DRILL MOTORS
Various
Bit Sizes
RECOMMENDED BIT RPMs
Bit
Diameter
1”
2”
3”
4”
6”
8”
10”
12”
14”
18”
20”
24”
36”
42”
Mounted Hydraulic Motors
Danfoss, Char-Lynn and White Motors
Mounted into a pillow block with spindle. The core bit is then attached to
the spindle for drilling. Motors include hydraulic hose connections.
Recommended
RPM
3200
1600
1050
800
530
400
320
265
225
175
160
130
85
75
HYDRAULIC MOTOR RPM CHART - MAXIMUM RPM WITH CUBIC INCH DISPLACEMENT & GPM COMBINATIONS
Danfoss Motor
Cubic Inch
Part #
.77
1.16
Char-Lynn Motor
1.55
1.94
4.9
6.2
8.0
9.6
11.9
White Motor
14.9
18.7
24.0
4250012 4250013 4250014 4250015 4250008 4250007 4250006 4250005 4250004 4250002 4250000 4250003
Cat #
01836
01837
01838
01839
01833
47655
8 GPM
2640
1680
1232
973
377
298
01832 01831
231
193
32.0
45.6
4250010
4250011
01830
01828
01826
01829
01834
01835
155
124
99
77
58
41
12 GPM
N/A
2520
1848
1459
566
447
347
289
233
186
148
116
87
61
20 GPM
N/A
N/A
N/A
2553
990
782
606
505
408
326
259
202
152
106
25 GPM
N/A
N/A
N/A
N/A
1226
969
751
626
505
403
321
250
188
132
List Price
$938
938
938
938
$1,549
1,549
1,549
1,549
1,549
1,549
1,549
1,549
$1,834
1,834
Coring Equipment
To choose the right hydraulic motor for your application, follow this formula:
Closest G.P.M. of your power unit + closest RPM of core bit on the Bit RPM chart above and
match these values on the chart above to get the Cubic Inch of the motor you need.
CORE BORE
4 HP Hand Held Hydraulic Motor
·3-speed with slip clutch
·300/800/1600 RPM
·1.250”-7 spindle (6” capacity)
·13 GPM maximum flow
Part # 4244057, Cat # 47075
List Price: $5,238
CORE BORE
4-Speed Mounted Hydraulic Motor
·160/320/480/960 RPM at 12 GPM
·Minimum RPM -110 at 8 GPM
·Maximum RPM - 1600 at 20 GPM
·12” drilling capacity without extension
·24” drilling capacity with extension
Part # 4250021, Cat # 84446
List Price: $4,242
230
CORE BORE
Tandem Core Rig
·M-2 stands that are fit for one or
more motor mounts allowing many
holes at once
Part # 4241300, Cat # 20421
List Price: $5,516
HYDRAULIC & PNEUMATIC COMPONENTS
Ingersoll-Rand Air Motors
Hand Held Air Motors
· Shown with pillow block
· Variable speeds depending on air source
· 3-speed with slip clutch
· Includes 5/8”-11 and 1.250”-7 spindle
AIR-PNEUMATIC MOTORS
DESCRIPTION
RPM
2.1 HP Hand held 3 speed @ 90 psi
3.8 HP Hand held 3 speed @ 90 psi
3.5 HP Ingersoll-Rand
8 HP Ingersoll-Rand
300/500/1500
190/420/805
variable
variable
Flow Control Valves
Variable speed control that
adjusts drilling speeds from zero
to the maximum RPM your motor
allows. Connects directly into
motor. For use with hydraulic
mounted motors (0-20GPM)
Safety
Override
Slip Clutch
Slip Clutch
N/A
N/A
Max
CFM
77
122
95
230
Part #
Cat #
4244054
4244053
4244051
4244052
51479
47377
01765
70339
Pillow Block
Assembly
Pillow Block
Assembly
1-.875”-7
spindle
1.250”-7
spindle
Uncrated/Crated
List Price
Weight (lbs)
35/37
$4,107
32/34
4,548
31/33
7,143
31/33
11,930
M-4
Pillow Block
Assembly
For use with M-4 core
rigs and Danfoss motor
1.250”-7 spindle
HYDRAULIC & PNEUMATIC COMPONENTS
Description
Part #
Cat #
Pillow Block Assembly - 1.250”-7 spindle for Char-Lynn motors
4277539
01853
Pillow Block Assembly - 1.875”-7 spindle for Char-Lynn motors
4277540
01855
4277547
20243
4277546
99280
Pillow Block Assembly - 1.250”-7 spindle for M-4 w/Danfoss Hydraulic motors
4600039
47441
Inline On/Off Valve (3/2 way) for power units w/gear motor (CB15 and CB24)
4640090
85296
Flow Control Valve (Hydraulic motors only) 0-20 GPM
4250019
01840
Flow Control Valve (inline) for Char-Lynn Hydraulic motors only 0-20 GPM
4699967
47662
Flow Control Valve, motor (mounted) for Char-Lynn Hydraulic motors only* 0-20 GPM
4699956
47556
Flow control valve hose kit with 3/4” fittings
4699989
48980
* Must order hose kit separately
231
Coring Equipment
Pillow Block Assembly - 1.250-7 spindle for White motors
Pillow Block Assembly - 1.875-7” spindle for White motors
Uncrated/Crated
List Price
Weight (lbs)
29/31
$1,049
30/32
1,304
29/31
1,049
30/32
1,304
6/7
709
23/24
864
23/24
709
23/24
776
9/10
490
12/14
348
COLUMNS (MASTS) FOR CORE RIGS
Coring Equipment
DRILL RIG COLUMNS (MASTS)
Description
Part #
Cat #
M-1 - 2-1/2” square x 36” long
4645084
02120
4645015
02079
4645081
02116
4645082
02117
4645083
02119
M-1 ANGLE 2-1/2” square x 36-3/4” long
4645070
02106
M-1 ANGLE 2-1/2” square x 42” long
4645068
02104
4645086
54972
4645085
61782
4641003
02006
4641002
02004
4641078
02036
4641079
02037
4641080
02038
4641084
52242
4641082
02039
M-2 - 2-7/8” square x 108” long
4641083
02040
Shipping
Weight List Price
(lbs.)
14
$184
16
214
18
244
23
290
27
350
14
193
16
223
18
250
23
296
24
320
28
375
32
427
40
536
48
645
56
747
64
914
72
1,030
80
1,145
M-2 - 2-7/8” square x 120” long
4644120
54847
4641089
02043
24
328
4641068
02028
28
380
4641091
51671
32
435
4641086
52192
40
541
4641087
51883
48
649
M-3 STAIR 1-1/2” square x 25” long
4643001
59189
7
169
4643037
02061
9
187
4643033
52857
11
207
4643034
02058
13
233
4643032
02057
15
252
M-3 ANCHOR 1-1/2” square x 34” long
4643002
02044
9
154
4643006
02047
10
169
4699923
54392
11
187
M-4 - 1-5/8” x 2” x 30” long
4600007
01990
4
172
M-4 - 1-5/8” x 2” x 42” long
4600034
51129
6
230
M-4 Anchor/Swivel 1-5/8” x 2” x 30” long
4600042
49017
4
180
M-4 Anchor/Swivel 1-5/8” x 2” x 42” long
4600047
47722
6
236
M-5 2-1/2” x 3” x 32” long
4600122
74431
9
321
M-5 2-1/2” x 3” x 40” long
4600106
49519
11
374
M-5 2-1/2” x 3” x 50” long
4600134
51415
14
427
M-5 2-1/2” x 3” x 60” long
4600123
88812
17
537
M-5 ANCHOR 2-1/2” x 3” x 40” long
4600115
49695
11
374
M-5 ANCHOR 2-1/2” x 3” x 50” long
4600135
51725
14
427
M-5 ANCHOR 2-1/2” x 3” x 60” long
4600127
58986
17
537
M-6 - 3-7/8” x 5-7/8” x 72” long
4640000
47837
84
1,298
M-6 - 3-7/8” x 5-7/8” x 96” long
4640042
52380
94
1,678
M-6 - 3-7/8” x 5-7/8” x 120” long
4640063
55510
104
2,060
232
Huge selection of columns
(masts) in lengths up to 120”
Use custom size masts to build
your core rig the way you want
ADAPTERS & EXTENSIONS
Have a special application? We make custom adapters and extension rods to handle your needs quickly!
ADAPTERS
EXTENSION RODS
4”
Length
6”Length
CORE BIT ADAPTERS
Description
Top Thread
Bottom
Thread Male
5/8”-11
5/8”-11 Bolt *
1.250”-7
5/8”-18
5/8”-11
5/8”-11
5/8”-11
5/8”-11
5/8”-11
5/8”-11
5/8”-11
5/8”-11
5/8”-11
5/8”-11
1.250”-7
1.250”-7
1.875”-7
Part #
Cat #
Weight List Price
1.250”-7 Female
1015
4400008
01878
2 lbs.
$50.30
12”
1.250”-7 Female
1015-B
4400162
47697
2
81.88
5/8”-11 Female
1510
4400009
01880
2
74.87
Length
1.250”-7 Female
1016
4400010
01881
2
74.87
1/2”-20 Female
1020
4400011
01882
2
74.87
Bantum Female
Bantum-15
4400012
01883
2
29.13
#2 Morse Taper Male
Morse #2
4400068
01920
2
58.49
#3 Morse Taper Male
Morse #3
4400061
01917
2
67.85
#4 Morse Taper Male
Morse #4
4400062
01918
2
87.73
#5 Morse Taper Male
Morse #5
4400063
79291
2
130.00
3/8” Straight Shank Male
3/8” S.S.
4400056
01913
1
29.24
1/2” S.S.
4400033
01899
2
29.24
5/8” S.S.
4400087
01936
1
40.94
1/2” BSP Male
1/2” British standard piping∞
4400037
01905
2
53.81
1/2” BSP Male
1/2” British standard piping∞
4400036
01903
2
78.37
1.875”-7 Female
Large thread reducer
4400121
01949
5
195.00
1.250”-7 Female
Large thread adapter
4400134
01956
5
195.00
* Male bottom thread is a replaceable grade 8, 5/8”-11 bolt with water way - Part # 4400163, Cat # 53577 - List Price: $12.86
∞ For use on Weka motors
24”
Length
CORE BIT EXTENSION RODS
NWJ LARGE THREAD
ADAPTER & EXTENSIONS
Part #
Cat # List Price
5’ drill extension with
NWJ threads
4400322
77369
4”
$582
NWJ Male-1.250”-7
Female adapter
4400323
77368
452
Male 1.250”-7- NWJ
Female adapter
4400324
77703
452
NWJ Male- 1.875”-7
Female adapter
4400325
78493
452
Male 1.875”-7 - NWJ
Female adapter
4400326
78494
452
4”
6”
6”
12”
12”
24”
36”
48”
6”
12”
125-4
125-4-S
water sprayer
120-6
125-6
120-12
125-12
125-24
125-36
125-48
187-6
187-12
1.250”-7
4400001
01863
5 lbs.
1-5/8” & up
1.250”-7
4400002
01864
5
72.52
up to 1-1/2”
1-5/8” & up
up to 1-1/2”
1-5/8” & up
1-5/8” & up
1-5/8” & up
1-5/8” & up
Optional large bits
Optional large bits
5/8”-11
1.250”-7
5/8”-11
1.250”-7
1.250”-7
1.250”-7
1.250”-7
1.875”-7
1.875”-7
4400003
4400004
4400005
4400006
4400042
4400007
4400024
4400141
4400113
01866
01869
01870
01873
01909
01877
01897
01962
01945
5
7
8
10
15
20
25
7
15
45.62
61.99
63.16
67.85
117.00
182.00
203.00
83.06
126.00
Thread
Part #
Cat # Weight
5/8”-11 adapters and extensions also fit dry hole saw
and thinwall core bits
Standard core bits have the following threaded hub sizes:
1-1/2” and under (bit diameter)= 5/8”-11 thread
NWJ threads have a large thread pitch that make it easy
to unscrew the core bit and/or other extensions
1-5/8” and up (bit diameter) = 1-250”-7 thread
(5/8” diameter, 11 threads per inch)
(1-1/4” diameter, 7 threads per inch)
233
Coring Equipment
1-5/8” & up
List
Price
$51.47
Length Description Fits Bit Size
Description
CONTROL PANELS & VACUUM PUMPS
Single Switch
Control Panel
With amp meter,
dual outlet - single
switch control both
Gauge max out at:
15, 18 or 20 amp
Digital Dual Switch Control Panel
DK42 Control Panel
Wth amp meter, dual outlet two switches
to control each outlet, gauges max at:
15, 18 or 20 amp
With amp meter, volt
meter, motor reversing
switch, vacuum pump
switch, single and three
phase outlets
Heavy Duty On/Off
Switch
Used on Core Bore
and Milwaukee
motors
CONTROL PANELS / AMP METERS
Dual Switch Control Panel
Wth amp meter, dual outlet two switches to control
each outlet, gauges max
at: 15, 18 or 20 amp
Description
Voltage
Part #
Dual Switch/Dual Outlet
115V
4243000
01724
Cat # Weight (lbs) List Price
5 lbs.
$288.00
Dual Switch/Dual Outlet
SIngle Switch/Dual Outlet
Single Switch/Dual Outlet
Heavy Duty On/Off Switch
Heavy Duty On/Off Switch
Dual Switch/Dual Outlet (for Milwaukee motors)
230V
115V
230V
115V
230V
110V
4243075
4277537
4277538
4244021
4243021
4277582
01729
01851
01852
01742
56316
47203
5
4
4
2
2
5
295.00
236.00
282.00
76.46
Dual Switch/Outlet for Weka DK22&DK32
Dual Switch/Outlet for Weka DK22&DK32
Control Panel 1 & 3 Phase for Weka DK42
Digital Dual Switch Control Panel
115V
230V
220V
115V
4277594
4277595
4243006
4243012
03325
84217
01726
37464
5
5
5
6
76.46
252.00
525.00
410.00
540.00
409.00
ANCHORS & SETTING TOOLS
Description
Part #
Cat #
1/2” Anchors (box of 50)
ANCHOR-1/2
3/8” Anchors (box of 50)
ANCHOR-3/8
1/2” Setting Tool
SETTINGTOOL-1/2
3/8” Setting Tool
SETTINGTOOL-3/8
46822
46857
74482
74846
List
Price
$69
45
4
3
Coring Equipment
VACUUM PUMPS
Description
Gast 1/8 HP, 24hg, vacuum pump with fittings - M-1/M-2
Gast 1/8 HP, 24hg vacuum pump with fittings - M-1/M-2
Gast 1/8 HP, 24hg vacuum pump without fittings
Gast 1/8 HP, 24hg vacuum pump without fittings
Gast 1/8 HP, 24hg vacuum pump with fittings for A.P.V. base
Gast 1/8 HP, 24hg vacuum pump with fittings for A.P.V. base
Gast 1/8 HP, 24hg vacuum pump with fittings - M-5
Gast 1/8 HP, 24hg vacuum pump with fittings - M-5
Vacuum pump cord - 100ft, 12 gauge - 125V with
15 amp connectors
Voltage
115V
230V
115V
230V
115V
230V
115V
230V
115V
230V
Part #
4244075
4244076
4244077
4244079
2600016
2600017
4244078
4244080
4244090
4244091
Cat #
01767
01769
01770
01772
00443
56522
01771
80355
46895
51410
125V
4699104
15914
234
Weight (lbs) List Price
9
364
9
439
9
400
9
470
8
353
8
400
9
368
9
459
9
374
9
447
15
197
CORING ACCESSORIES
Water Swivel
375 HD
Water Swivel
750 HD
Air Vacuum
Swivels
Bit Roller
Assembly
5/8”-11 female to
5/8”-11 male
5/8”-11 female to
1.250”-7 male
5/8”-11 or 5/8”-16 to
1.250”-7 Male
with ball
bearings
M-2 Roller Carriage
Adjustable with heavy
duty rollers
Dovetail Motor Mount
Quick Disconnect
M-5 Cam Operated
Q.D. Adapter
Removes motor quickly
Allows use of Outriggers
Super Nut
Used with drop-in
anchors to quickly
anchor a rig
Metal Bit
Spacer
M-4 Motor Mount
Clamp Assembly
Makes it easier to
remove bits from
the spindle
Allows you to mount the
DK12 or DK13 on the M-4
(60mm hole)
7” - M-1/M-2 Outrigger
10” - M-1/M-2 Outrigger
For the fastest disconnect that
adds 7” of drilling diameter
For the fastest disconnect that
adds 10” of drilling diameter
MOTOR MOUNTS AND DISCONNECTS
Part #
Cat #
M-1/M-3 Dovetail Motor Mount Quick Disconnect
M-2 Dovetail Motor Mount Quick Disconnect
M-4 Motor Mount Clamp Assembly for Weka Motors
M-4 Motor Mount Assembly for Milwaukee Motors
M-5 Style Quick Disconnect for M-1 and M-2 (allows use of Outrigger)
Quick Disconnect 7” Outrigger
Quick Disconnect 10” Outrigger
Weka to M-2 motor mount assembly (DK22 or larger)
Weka to M-1/M-3 motor mount assembly (DK22 or larger)
4648010
4648007
4600003
4600029
4699961
4400312
4400313
4648033
4648031
02150
02147
01987
02001
46830
84939
47129
02161
02160
Water Swivel 1.250”-7 Female to 1.250”-7 Male
Water Swivel 750 HD 5/8”-11 Female to 1.250”-7 Male
Water Swivel 750 HD 5/8”-16 Female to 1.250”-7 Male
Water Swivel 375 HD 5/8”-11 Female to 5/8”-11 Male
Water Swivel 375 HD 5/8”-16 Female to 5/8”-11 Male
Air Vacuum Swivel - 5/8”-11 Female to 1.250”-12 Male
Air Vacuum Swivel 5/8”-16 Female to 1.250”-12 Male
4400186
4400013
4400304
4400014
4400303
4400125
4400302
53840
01884
01980
01885
01979
01950
58733
10
10
10
10
10
10
10
425
226
226
217
217
252
264
Bit Roller Assembly
3/8”-16 Super Nut
1/2”-13 Super Nut
5/8”-11 Super Nut
Plastic Bit Washer 1-1/4”
Plastic Bit Washer 1-7/8”
Super Bit Spacer (metal) 1-1/4”
4600300
4400069
4400070
4400071
1400030
1400185
4600502
12624
01921
01922
01923
00034
50811
47552
1
1
1
1
0.1
0.1
0.2
88.85
32.75
32.75
32.75
2.34
2.34
41.71
4277531
01844
15
875
4277593
02370
10
821
4277598
16635
12
1,789
WATER AND VACUUM SWIVELS
DRILL MOTOR & SPINDLE ACCESSORIES
ROLLER CARRIAGES
M-2 Roller Carriage Assembly
M-2 Roller Carriage Assembly for Autofeed System
(gear box not included)
Gear Box/Carriage Only for M-2 Roller Carriage
for Autofeed System
235
Weight (lbs) List Price
5
$151
5
155
5
65
5
127
10
349
10
569
10
650
8
81.93
8
69.98
Coring Equipment
Description
CORING ACCESSORIES
Electric Cords with Twist Lock
Plug to Straight Plug
Spindle Wrench
for Weka Motors
Cat # 00206
Spindle
Wrench for
Core Bore and
Milwaukee
Motors
Cat # 00201
Description
CORING ACCESSORIES
Part #
Cat #
1-3/8” Spindle Wrench for Core Bore & Milwaukee Motors
1-1/4” Spindle Wrench for WEKA motors
Electric Cord - 50ft, 12GA, 115V, 20amp Twist to 15amp Straight *
Electric Cord - 100ft, 12GA, 115V, 20amp Twist to 15amp Straight *
Electric Cord - 50ft, 10GA, 115V, 30amp Twist to 15amp Straight **
Electric Cord - 100ft, 10GA, 115V, 30amp Twist to 15amp Straight **
DK42 cord - 100ft - 12 gauge, 250V, 20amp
Power Splitter Sidewinder - 230V - 2(110V) outlets
Core Bore Stop Box - 115V - for 15 amp use
Core Bore Stop Box - 115V - for 20 amp use
DK42 Control Panel Supplies 230V current at 1 and 3 phase
DK42 Phase converter 1 phase 230V to 3 phase 230V
2400010
2400015
4699100
4699101
4699102
4699103
4699105
2800379
4243050
4243051
4243006
4243010
00201
00206
47884
48548
47005
47987
49828
52225
01728
22092
01726
01727
5
5
13
25
16
31
5
22
10
10
25
45
$44.95
44.95
128
226
158
273
312
820
1,173
1,191
540
3,524
M-1 (2”) Spacer Block (adds 4” of drilling capacity)
M-2 (2”) Spacer Block (adds 4” of drilling capacity)
M-5 Spacer Block (for electric drill motors only) up to 20” capacity
M-6 Spacer Block (up to 36” capacity) 9.5”
M-6 Spacer Block (up to 48” capacity) 15.5”
4400072
4400073
4600136
4640026
4640025
01924
01926
47118
47072
47073
5
5
15
22
30
$91.11
119
201
135
148
Core Catcher Assembly Complete
The Extractor - Core Retrieval Tool
4400327
2401000
78095
26386
8
1
$231
43.68
SPACER BLOCKS
CORE REMOVAL
* For heavy duty on/off switch.
Coring Equipment
Core Bore Stop Box
Shuts off the electricity to the motor(s)
if the core bit hits grounded metal
Cat # 01728 or 22092
** For single and dual switch control panels
Core Catcher Assembly
The Extractor Core Retrieval Tool
Attaches to spindle on the top end and an
eye- bolt is anchored into the core.
The cable is attached to the eye-bolt or hook.
Includes: Spindle adapter and catcher cable
Cat # 78095
The cable is inserted down the sides of the core.
The cable clings to the core as the rings are pulled by
hand or lifted by other means
Cat # 26386
236
CORING ACCESSORIES
Hole Roughner Tool
Blade Measuring Gauge
Dial or Digital available: indicates
the wear on a diamond blade.
Great for measuring rental blades.
Bit Wear Measuring
Adapter Kit
Attaches to the Blade
Measuring Gauge to
measure core bit wear.
Adapter with welded spiked tool for creating a
rough surface in a core hole. Useful for
providing better adhesion of epoxy anchor
systems inside the hole.
The spiked end is made up of 6 carbide tips.
Includes 1.250”-7 adapter (welded)
Ask about sizes not listed below.
Vacuum Plate with Wheels
Vacuum Gaskets
Bit Sharpening Pot
All purpose vacuum base(A.P.V.)
that turns your small anchor base
into a vacuum base.
Includes: base, vacuum mount,
wheel kit and vacuum gasket
Rubber gasket that ensures a positive
suction on flat surfaces. Keeps the rig
in place. Stays in the base better than
ever before with our updated vacuum
bases
Cast iron pot that includes
silcon sand for sharpening
dull core bits.The sand acts
as an abrasive to expose the
diamonds in the segments
MISC ACCESSORIES
Part #
4400208
4400209
4400218
4247075
CB1875HR
CB2000HR
CB3000HR
CB4000HR
CB5000HR
4645020
4641024
4643040
4600016
4600132
4400223
2400190
4400022
4400023
4645016
237
Cat #
01972
01973
01974
01818
77440
27398
28447
28448
26522
02083
02022
02064
01995
47445
64228
58593
01895
01896
02080
12
$422
12
235
12
77.61
18
312
6
1,002
8
1,008
10
1,480
12
1,646
14
1,687
.1
30.29
.1
30.29
.1
18.45
.1
20.49
.1
25.77
2
279
1
107
25
160
5
132
3
58.52
Coring Equipment
Description
Blade Measuring Gauge with Digital Micrometer
Blade Measuring Gauge with Dial Indicator
Bit Wear Measuring Adapter Kit (attaches to Blade Gauge)
Vacuum Plate with Wheels (fits any small anchor base)
1-7/8” Carbide Hole Roughner with (6) .375” tips
2” Carbide Hole Roughner with (6) .375” tips
Vacuum gasket for M-1 vacuum base - 50” long (glued)
Vacuum gasket for M-3 vacuum base - 30-1/2” long (glued)
Bit Lifting Eye 1.875”-7 Thread Assembly
Bit Lifting Eye 1.250”-7 Thread Assembly
Sharpening Pot and Sand (to sharpen core bits)
Segment Brazing Tool
Ceiling Jack for M-1, M-3 & M-5 rigs
CORING ACCESSORIES
AUTOFEED CONTROL SYSTEMS
Part #
Cat #
Weight
(lbs.)
List
Price
M-2 Autofeed Carriage 115V/30 Amp 5801228
24135
10
$6,902
M-2 Autofeed Carriage 230V/15 Amp 5800661
91154
10
7,084
M-2 Autofeed Control 230V/15 Amp
5800503
(requires M-2 carriage)
48563
12
6,552
02370
23
821
Description
Complete M-2 Roller carriage
assembly for autofeed
4277593
M-2 Autofeed Control Unit
· Automatically runs your M-2 core rig
· Enables the operator to use several core drills at the same time
· Saves labor - especially in hard aggregate
· Extremely efficient serial drilling
· The unit keeps the motor load at the preset value
(17 to 24 amps at 115V; 10 to 15 amps at 230V)
· For use on Weka DK12 through DK32, CB748
and all Milwaukee drill motors
· Autofeed unit consists of control unit and a 2:1 gear box
with roller carriage only
M-6 AUTOFEED ASSEMBLY
Description
M-6 Autofeed QD Carriage
Assembly - Hydraulic Power
Feed Kit
Part #
Cat #
4640115 14951
Weight
(lbs.)
List Price
24
$3,842
M-6 Autofeed QD Carriage Assembly
Coring Equipment
with cam lock quick disconnect
· Allows automatic feed with one lever control
PIPE MOUNT SYSTEM
PIPE MOUNT
Description
Part #
Cat #
Pipe Mount Assembly
(Specify Core Rig Model)
4400509
64823
Weight
List Price
(lbs.)
10
$292
238
· Works with any Core Bore rig
· Can be used on any size pipe
· Includes base plate, tie-down strap and hardware
· Bit capacity depends on rig being used
WATER & DUST SUPPRESSION
E-400F Water Pressure
Tank with Fittings
E-350 Water Collector
Ring with Teel Pump
Available without fittings.
Heavy duty model for
Weka motors available.
For water suppression,
not wet core drilling.
· 3.5 gallon capacity
Helps keep water and
slurry contained
Trap Ring
Telescoping Trap Ring
Helps keep water and
slurry contained.
Different versions for
M-1, M-2 and M-4 rigs
Spring loaded trap ring
that allows you to core
small holes while keeping
the trap ring around the bit
WATER & DUST SUPPRESSION
Description
VCE2000U Wet/Dry Slurry
Vacuum
Cat #
Weight
List Price
(lbs.)
E-400F Water Pressure Tank with Fittings
4400021
01894
5 lbs.
$160
E-400 Water Pressure Tank without Fittings
2600042
00452
5
112
E400F HD Water Pressure Tank with Fitting
- for Weka Motors
4400526
15800
5
164
E-350 8” Water Collector Ring and Teel Pump (115V)
4400015
01886
10
195
E-350 8” Water Collector Ring and Teel Pump (230V)
4400201
01969
10
209
Trap ring with 7” stroke
for Weka DK11/DK12/DK13 (for bits up to 1-3/8”)
2600350
83907
5
197
Trap ring with 17” stroke
for Weka DK11/DK12/DK13 (for bits up to 1-3/8”)
2600359
79765
5
275
E-150 8” Trap Ring Only
4400016
01887
5
80.71
E-450 Teel Pump (115V) for Trap Rings
4400264
96860
5
114
E-450 Water Collector (230V) for Trap Rings
4400101
01940
5
130
E-250 Wet/Dry Vacuum Hose Adapter
4400017
01889
1
46.79
E-300 Dry Trap Ring for Dry Drilling
(specify size - 8” max)
4400018
01891
8
127
Max - 3” Diameter Trap Ring for M-1 Rig
4640095
94233
2
154
Max - 3” Diameter Trap Ring for M-2 Rig
4640096
94234
2
158
Max- 3” Diameter Trap Ring for M-4 Rig
4645103
92832
2
169
6” Diameter Trap Ring with 1-1/2”
Hose Adapter for M-1
4648057
79513
2
149
6” Diameter Trap Ring with 1-1/2”
Hose Adapter for M-2
4648058
82178
2
149
62
$928
WET/DRY VACUUM SYSTEM
VCE2000U Wet/Dry Slurry Vacuum
239
2600505 12842
Coring Equipment
110 volt, 20 amp motor, stainless
steel body container, flex hose with
adapter for large attachment, waste
liquid capacity of 10-1/2
gallons (9 gal .dry). Weight: 62 lbs.
Part #
DUSTLESS VACUUMS
Dustless Wet/Dry Vaccum is
better for fine dust because:
· Improved air flow = more
suction=better dust control
· Larger filters for superior air flow
· Larger canister (16 gallon) for
superior air flow
· Maintains suction after ingesting
40 pounds of fine dust
Specifications:
Inches Water Lift
CFM
Volts
Watts (Peak)
Amps
RPMs
Dustless Wet/Dry Vacuum
· Better than a shop vacuum
· Less expensive than an industrial vacuum
· Switch from dry to wet vacuuming without
changing filters
· Designed specifically to capture extra fine
dust particles
· Excellent for drywall, concrete, stone and
fiberglass
HEPA
76.9”
126.39
120V
1206
10.6
24,140
Fabric Filters
Micro Pre-Filter Wunder Bag
· 2-stage inner and outer fabric filters
· Machine washable - long life
· Stays dry at all times
· Clean outer filter without opening
canister by wiggling the agitator rod
· No need to change filters when
switching from dry to wet operation
· Large surface area for maximum airflow
· Eliminates the need to clean filters
· Disposable and inexpensive
· Retains strength when wet
· Holds more than 40 lbs. of dust
& debris
· Captures extra fine dust down to
0.5 microns
· Extends the life of HEPA filters
DUSTLESS SYSTEM and ACCESSORIES
Description
Part #
Cat #
16 Gallon Wet/Dry Vac with 12’ Hose
HEPA 16 Gallon Vac with 12’ Hose
Wet/Dry Filter Package Primary/Secondary
Micro Pre-Filter Wunder Bag 2-Pack
Master Pack Pre-Filter
(10 Micro Pre-Filter Wunder Bag 2-Packs)
Dealer Pack Pre-Filter
(5 Micro Pre-Filter Wunder Bag 2-Packs)
5/8” Arbor Extender
12’ Hose With Cuffs
25’ Hose with Cuffs-Coupler
2506601
2506603
2506631
6043900
22154
22171
22241
22243
Coring Equipment
HEPA Filter
Hepa Vaccum
The Micro Pre-filter bag and HEPA filter are
designed to support optimum air flow. Other filters
and pre-filters simply don’t have the surface area
to allow enough air to pass through to support
effective dust control. Dustless HEPA filters meet
all government requirements and are certified to
IEST-RP-CC001.5 insuring a minimum filtration
efficiency of 99.97% at 0.3 micron.
Longer Lasting HEPA filter
You can greatly extend the life of your
valuable HEPA filter by using a Micro
Pre-filter to capture 99% of the dust, leaving
your HEPA filter to capture only the smallest
particles.
· Certified to meet OSHA, EPA &
NIOSH guidelines
· Captures down to 0.3 micron
· Large circumference for increased air flow
· Large, loose pleats for increased air flow
240
6043901 22245
Weight List
(lbs.)
Price
31
$342.00
33
536.00
1
39.70
1
22.66
1
226.63
6043902 22252
1
113.32
2506638 22286
2506655 22325
2506656 22337
1
1
2
24.94
45.38
68.10
Hepa Head Floor/Carpet Tool
Activated by the movement of air being
drawn through the head of the carpet
cleaner. When the vacuum is turned on it
causes the beater bar and brushes to
revolve and pick up the dirt at the same
time. Because there is no electric motor
there is no need for an additional electrical
cord to get in the way. Meets EPA
requirement for lead paint removal work.
DUSTLESS SHROUDS & ACCESSORIES
* Shown with optional
cover plate
CutBuddieTM
· Great for crack chasing, tuck
pointing and decorative concrete
cutting
· Clear polycarbonate for improved
visibility
· Two sizes to fit most 4” to 7” grinders
DustBuddieTM
· Clear polycarbonate for improved
visibility and durability
· Removable front edge of shroud
for grinding close to the wall or edge
· Brush skirt for improved performance
· Fits most 4” to 7” hand grinders
DustieTM
· Low cost and easy to install
· Captures 99% of airborne dust
· Fits most hand grinders
· Designed to capture extra fine dust
· Cover Plate and 18” hose sold separately.
· Cover Plate for crack chasing, tuck pointing
and concrete cutting
DUST SHROUDS & ACCESSORIES
BitBuddieTM
8”
· Captures dust and slurry easily
· Suction holds it in place
· 1” to 4” version is excellent for
core drilling applications
· Trim to desired hole size
· 1-3/8” is great for tight places
like drilling faucet holes in stone
or concrete counter tops
· Flexible translucent shroud
· Includes 18” hose
Description
Part #
Cat #
5” DustBuddie Kit
5” Universal Dustie
5” CutBuddie for Blades
7” DustBuddie Kit
7” Universal Dustie
9” CutBuddie for Blades
1 3/8” BitBuddie with 18’ Hose
1” to 4” BitBuddie with 18’ Hose
8” BitBuddie - no hose
5” Cover Plate
7” Cover Plate
5/8” Arbor Extender
12’ Hose With Cuffs
25’ Hose with Cuffs-Coupler
TOOLPOD
VACPOD
2506612
2506613
2506615
2506618
2506619
2506621
2506625
2506626
2506733
2506628
2506629
2506638
2506655
2506656
2506636
2506637
22185
22196
22200
22211
22212
22218
22226
22231
13715
22232
22237
22286
22325
22337
22255
22267
List
Price
$102.18
28.34
136.26
102.18
28.34
147.62
40.84
40.84
56.80
11.30
11.30
24.94
45.38
68.10
113.54
113.54
ToolPod & VacPod
Used to ‘sync’ your grinder or vacuum to work together. Vacuum turns on and off with your machine.
Turbo Drywall Sander
TURBO DRYWALL SANDER
Description
Part #
Cat #
Drywall Sander with 6’ Pole
120 Grit 25 Pack Sandpaper for Drywall Sander
Multi-Grit Pack 25 Pack Sandpaper
for Drywall Sander
2506610
2506662
22180
22339
2506669
22346
241
Weight
List Price
(lbs.)
6
$158.98
1
28.33
1
28.34
Can be used with
or without 6 ft pole
· Sand in corners & tight places
· Perfect for bathrooms & kitchens
· Good for pro drywall contractors as a
touch up tool
Coring Equipment
The Turbo Drywall Sander is also much lighter than professional units, weighing less than
5lbs. compared to typical 8lbs units. The simple, brilliant design of the orbital sanding head
eliminates the need for electric motor mounted on the pole and greatly
reduces the system’s weight.
· Powered by the air flow from the vacuum
· Air turbine rotates at 10,000 RPMs for fast, efficient sanding
· Orbital sanding head does the work for you
· Good for pro drywall contractors as a touch up tool
· Pole extends 6 feet for tall ceilings · Lightweight - less than 5 lbs.
· Sand in corners & tight places
· Perfect for bathrooms & kitchens
DUSTLESS HEPA COLLECTION UNITS
How Air-Bender™ technology works
The Air-Bender™ cyclonic system
“bends” the air stream at the bottom
of the canister, and allows 98% of the
dust to settle in a large Passive Air Zone
before the air moves on to the HEPA filter
canister. By allowing only 2%, instead of
20%, of the dust to reach the HEPA filter,
Air-Bender™ technology enables contractors to go 10 times longer between
cleaning intervals.
DustBot 300™
· Lighter weight 20 gallon
Part #2507047, Cat # 35694
List Price: $6,295
DustBot 600™
· Heavy duty 30 gallon
Part #2507045, Cat # 35680
List Price: $8,395
DustBot 300 & 600 Collection Systems
• Save time with patent pending AirBlast™ cleaning system
• Save money by extending the life of your HEPA filter
• Go 10 times longer between filter cleaning intervals
• Capture 98% of dust BEFORE it reaches the HEPA filter
• Clean filters fast and easy with a quick pull/release
of the AirBlast™ handle
• Stop guessing - a gauge tells you when to clean filters
• Transport with ease – separate components are light weight
• Meet government standards with certified HEPA filter
• Collect dust from ANY size of grinder
• Empty the wheeled cyclone canister with ease
• Clean HEPA filters without removing
• Go long with up to 150 foot hose (optional)
• Contain dust more effectively with plastic bags
• Empty fast and easy with wheeled cyclone canister
• Reduce maintenance - NO solenoids!
• Extend motor life with tangental air bypass cooling
• Run on two 120v circuits or a single 240v circuit
Coring Equipment
DustDroid 300 & 600 Fine Dust Collection Systems
• Save time with patent pending AirBlast™ cleaning system
• Save money by extending the life of your HEPA filter
• Go 10 times longer between filter cleaning intervals
• Extend HEPA filter life with Air-Bender™ technology
• Capture 98% of dust BEFORE it reaches the HEPA filter
• Clean filters fast and easy with a quick pull/release of the
AirBlast™ handle
• Stop guessing - a gauge tells you when to clean filters
• Transport with ease – separate components are light weight
• Meet government standards with certified HEPA filters
• Clean HEPA filters without removing
• Go big with a 20 gallon dust collection canisters
• Go long with up to 100 foot hose (optional)
• Contain dust more effectively with plastic bags
• Reduce maintenance - NO solenoids!
• Extend motor life with tangental air bypass cooling
• Use with a 32” grinder while using a 120v circuit
DustDroid 300™
· Lighter weight 20 gallon unit
Part #2507046, Cat # 35690
List Price: $6,295
DustDroid 600™
· Larger 30 gallon unit
Part #2507044, Cat # 35675
List Price: $8,395
242
DUSTLESS HEPA COLLECTION UNITS
DustHoodie™
• For floor grinding applications
• Fits most 7” – 9” hand grinders
• Fast and easy to install
• Snaps on and off with ease
• Flexible synthetic fabric shroud gives
operator greater flexibility of angle
• No need to adjust height
• Reduces noise too!
SlurryDrum™ (Head Only)
• 124” Static water lift at 114 CFM open flow
• Fits standard 55 gallon drum (Drum sold separately)
• Runs off a small generator: 120 volts, 12 amps and 1,440 Watts
• Lightweight and portable
• Comes with a 15 foot, 1-1/2” diameter hose
• Standard 3-point plug
Part #2507048, Cat # 35698
List Price: $119.95
Part #2507042, Cat #35655
List Price: $1,595
HEPA Pack
• EPA RRP
• Certified HEPA
• Dual filter system
• Reusable cloth filter
• Sealed-top disposable HEPA filter bag
for EPA RRP & hazardous materials
• Agitator rod for cleaning filters without
opening canister.
• Back-friendly harness design
• Belt-mounted controls
• Weight: 11 lbs.
• Capacity: 2.5 gallon
243
Coring Equipment
Part #2507043, Cat #35670
List Price: $549.95
WARRANTIES
DIAMOND TOOLS LIMITED WARRANTY
Diamond Products Limited warrants all of its diamond tools against defects in material and
workmanship for a period of one (1) year from the date of shipment to Customer. All laser welded
blades and bits are warranted against segment loss due to weld failure. Determination of the
applicability of warranty will be made after the product is inspected by our Warranty Claims
Department. The warranty does not cover any tool which Diamond Products determines to have
been used in an improper application, subjected to negligent abuse, improperly mounted, altered,
involved in a non-application accident or miscellaneously damaged. The responsibility of Diamond
Products under this Warranty is limited to repair or replacement at Diamond Products’ option free of
charge. In no event shall Diamond Products be liable for consequential or incidental damages. This
warranty includes all labor, parts and shipping costs via UPS ground. Proof of purchase in the form
of an invoice showing the date of shipment to be within one (1) year must accompany all warranty
claims. Diamond Products reserves the right to prorate any warranty claim based upon a percentage
of tool life prior to the failure in question.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED.
EQUIPMENT LIMITED WARRANTY
Diamond Products warrants all products manufactured by it against defects in material and
workmanship under normal use and service for a period of one (1) year from the date of shipment
to Customer. The responsibility of Diamond Products under this Warranty is limited to replacement
or repair of defective parts at Diamond Products’ Elyria, Ohio factory, or at a point designated by it,
of such parts as shall appear to us upon inspection at such point, to have been defective in material
or workmanship, with expense for transportation and labor born by Customer. In no event shall
Diamond Products be liable for consequential or incidental damages arising out of the failure of any
product to operate properly. Integral units such as gasoline engines, electric motors, batteries, tires,
transmissions, etc., are excluded from this Warranty and are subject to prime manufacturer’s warranty.
ABRASIVES LIMITED WARRANTY
Warranties
Diamond Products Limited warrants all of its abrasive products against defects in material and
workmanship for a period of one (1) year from the date of shipment to Customer.
The warranty does not cover any products which Diamond Products determines to have been used
in an improper application, subjected to negligent abuse, improperly mounted, altered, involved in
a non-application accident or miscellaneously damaged. The responsibility of Diamond Products
under this Warranty is limited to repair or replacement at Diamond Products’ option free of charge.
In no event shall Diamond Products be liable for consequential or incidental damages. This warranty
includes all labor, parts and shipping costs via UPS ground. Proof of purchase in the form of an
invoice showing the date of shipment to be within one (1) year must accompany all warranty claims.
Diamond Products reserves the right to prorate any warranty claim based upon a percentage of
product life prior to the failure in question.
244
WARRANTIES
HIGHWAY GROOVING MACHINERY LIMITED WARRANTY
Diamond Products LTD makes the following limited warranty:
Diamond Products warrants each new and unused grooving or grinding machine and accessory
equipment sold by it (except items not manufactured by Diamond Products such as engines,
pumps, transmissions, and other trade accessories sold with, attached to, or operated with Diamond
Products’ products), to be free from defects in material and workmanship under normal use and
service for one (1) year from the date of shipment from the Diamond Products factory, the obligation
under this warranty being limited to the replacement or repair at the Diamond Products factory, or
at a point designated by it, of such parts as shall appear to it upon inspection at such point to have
been defective in material or workmanship at the time sold, provided that the parts or parts claimed
defective are returned to inspection points, transportation charges prepaid.
If after inspection of the returned products, Diamond Products determines that the defect is a
result of misuse, mishandling, installation, abnormal conditions of operation, unauthorized repair or
modification, or due to the Buyer’s failure to install, maintain or operate the product in compliance
with the written instructions, all expenses incurred by Diamond Products in connection with the
replacement or repair of the product shall be for the account of the Buyer. Any product returned to
Diamond Products for replacement shall become the property of Diamond Products.
The Buyer shall be responsible for all costs of shipping, customs clearance and other related
charges in connection with Diamond Products’ replacement or repair of products located outside the
continental United States pursuant to the limited warranty.
This warranty applies only to new and unused grooving or grinding machines and accessory
equipment which after shipment from the Diamond Products factory have not been altered, changed or
repaired in any manner. Maintenance items, such as filters, V-belts, air cleaners, wheels or Blade
shaft bearings, are not covered under this warranty. The validity, performance and interpretation of
the limited warranty shall be governed by the internal laws (and not the laws of conflicts) of the State
of California. All disputes arising in connection with the limited warranty shall be resolved, if not sooner
settled, by a court of competent jurisdiction located in Stanislaus County, California, U.S.A.
Exclusive Remedy:
Replacement or repair of the Diamond Products’ products as provided under this warranty is the
Buyer’s exclusive remedy. This exclusive remedy will not be deemed to have failed of its essential
purpose so long as Diamond Products is willing and able to replace or repair any defective product
in the prescribed manner. In the event Diamond Products fails to replace or repair the product
as aforesaid, Diamond Products’ entire liability shall not exceed the amount paid by the Buyer to
Diamond Products for its purchase of the defective product.
Limitations on Warranty:
In no event shall Diamond Products be liable for any indirect, special, incidental, consequential
or other damages, including but not limited to damage to or loss of property or equipment, lost
revenues or profits, or harm to goodwill or business reputation directly or indirectly arising from the
sale, handling or use of the product, or from any other cause relating thereto and Diamond Products’
liability hereunder. Diamond Products shall not be liable to the Buyer for any claims, demand,
injuries, damages, actions or causes of action what so ever based on negligence or strict liability.
245
Warranties
Exclusions of Warranties:
Diamond Products, LTD makes no warranty that the products sold hereunder shall be merchantable or
that such products shall be fit for any particular purpose. Moreover, Diamond Products makes no express
or implied warranties except for the Limited Warranty outlined above. In addition, no representation or
warranty, express or implied, made by any distributor, sales representative, or field agent of Diamond
Products which is not specifically set forth herein shall be binding on Diamond Products.
EXTENDED WARRANTIES FOR COMPLETE CORE RIGS
3-Yr Gold Extended Warranties
Payment terms on the rig and warranty:
12 x 12 payment terms -12 equal payments
on the rig and warranty.
Note: Prices shown are net prices and no
discounts will be applied to extended warranties
Core Rig
(Complete)
Warranty
Part #
Catalog #
3-yr Warranty
Net Price
M-1
GOLDWARRANTYM1
24552
$595.00
M-2
GOLDWARRANTYM2
24554
795.00
M-3
GOLDWARRANTYM3
24562
525.00
M-4
GOLDWARRANTYM4
24590
550.00
M-5
GOLDWARRANTYM5
24599
695.00
The free service for your machine: At any time during the 3 year warranty
period, the machine maybe returned to Diamond Products’ Ohio plant
for inspection and service of all major components at no charge on one
occasion. This service inspection includes both the rig and motor. The free
service will be provided once during the 3 year warranty period. Incoming
transportation cost for this service will be paid by the customer while the
return shipment will be paid by Diamond Products.
The Warranty for 3 Years Against Any Defects in Workmanship or Defect:
Diamond Products warrants all electric core drilling rigs and components sold by it against defects in workmanship or materials for
a period of 3 years from the date of shipment to the customer. The responsibility of Diamond Products under this warranty is limited
to replacement or repair of defective parts at Diamond Products’ Elyria, Ohio factory, or a point designated by it, of such parts as
shall appear to us upon inspection at such point, to have been defective in material or workmanship, including the expense for
ground transportation and labor at our Ohio facility. Any air transportation will be the responsibility of the customer. Cost of labor by
the customer will be the responsibility of the customer. In no event shall Diamond Products be liable for consequential or incidental
damages arising out of the failure of any product to operate properly to be determined by the Diamond Products return department.
This warranty cannot be transferred from one end user to another if the rig is resold. The warranty can be transferred from an
authorized Diamond Products distributor to an end user when the rig is sold as new. Extended warranties are not available outside
the United States. Extended warranty must be ordered at the same time as new rig purchase. Extended warranties are valid only
with purchase of new core rig and all parts included in a complete core rig. Core rig serial number is needed for warranty claim and
used for reference on extended warranties.
5-Yr Gold Extended Warranties
Payment terms on the rig and warranty:
18 x 18 payment terms -18 equal payments
on the rig and warranty.
Note: Prices shown are net prices and no
discounts will be applied to extended warranties
Core Rig
(Complete)
Warranty
Part #
Catalog #
5-yr Warranty
Net Price
M-1
PLATWARRANTYM1
24607
$895.00
M-2
PLATWARRANTYM2
24623
1,095.00
M-3
PLATWARRANTYM3
24634
825.00
M-4
PLATWARRANTYM4
24644
850.00
M-5
PLATWARRANTYM5
24648
995.00
The free service for your machine: At any time during the 5 year warranty
period, the machine maybe returned to Diamond Products’ Ohio plant
for inspection and service of all major components at no charge on one
occasion. This service inspection includes both the rig and motor. The free
service will be provided once during the 5 year warranty period. Incoming
transportation cost for this service will be paid by the customer while the
return shipment will be paid by Diamond Products.
Warranties
The Warranty for 5 Years Against Any Defects in Workmanship or Defect:
Diamond Products warrants all electric core drilling rigs and components sold by it against defects in workmanship or materials for
a period of 5 years from the date of shipment to the customer. The responsibility of Diamond Products under this warranty is limited
to replacement or repair of defective parts at Diamond Products’ Elyria, Ohio factory, or a point designated by it, of such parts as
shall appear to us upon inspection at such point, to have been defective in material or workmanship, including the expense for
ground transportation and labor at our Ohio facility. Any air transportation will be the responsibility of the customer. Cost of labor by
the customer will be the responsibility of the customer. In no event shall Diamond Products be liable for consequential or incidental
damages arising out of the failure of any product to operate properly to be determined by the Diamond Products return department.
This warranty cannot be transferred from one end user to another if the rig is resold. The warranty can be transferred from an
authorized Diamond Products distributor to an end user when the rig is sold as new. Extended warranties are not available outside
the United States. Extended warranty must be ordered at the same time as new rig purchase. Extended warranties are valid only
with purchase of new core rig and all parts included in a complete core rig. Core rig serial number is needed for warranty claim and
used for reference on extended warranties.
246
Call: 1-800-321-5336
HOW TO PLACE ORDERS
FAX: 1-800-634-4035
Our Customer Service Representative Will Need:
· Company name and billing address · Shipping address, if different · Your Purchase Order No. and/or name
· Your Diamond Products Customer No. · Resale, Tax or other special situations · Special Instructions · Email address
· Date Needed
· Product(s) desired:
Example:
Quantity
1 Catalog # Description
12462
4” X .250 1
01789
Standard Gold Dry Tuck Point Blade
M-1 with CB748 Complete Combo Rig
CUSTOMER SERVICE POLICIES
FREIGHT POLICY: Three or more pieces of equipment shipped within the continental U.S. is FOB Factory. Diamond
Tool and Abrasive orders for over $400.00 net are FOB Destination via UPS Ground or truck. Premium shipping (i.e.
2nd day or overnight) is always FOB Factory. Equipment being picked up or shipped from a warehouse is subject to
additional freight charges. Shipments to Puerto Rico have a minimum of $4000 (abrasives), $3000 (diamond tools).
FAST PAY DISCOUNT: A Fast Pay Cash Discount will be allowed when payment is received in Elyria, Ohio within
the terms specified on your invoice.
SALES TAX: Sales tax will be charged where applicable unless a tax exemption certificate is provided.
REPAIRS: Items returned for repair should be carefully packaged and accompanied by a Packing Slip with the
following information:
· (RGA) number obtained from the Returns Dept. or Customer Service Dept.
· Your company name, address, phone and email · List of items for repair · Returned Goods Authorization
· Explanation of repair(s) needed · Original invoice (warranty only)
TRIAL POLICY: Purchase orders are requested and full payment is expected on all trial materials. Trials will be
invoiced on the basis of normal ordering quantity that the customer is expected to purchase if the trial is successful.
Orders must specify the exact number normally purchased and be invoiced on that basis. Trials proving only
partially satisfactory, but usable, will be credited on the basis of the value received. Trials proving completely
unsatisfactory receive full credit. The efficiency of the trial performance is the decision of the customer.
REPLACEMENT/REFUND: All catalog items returned to stock are subject to a 15% restocking fee. Non-catalog items,
special order items and any item beyond two (2) years from original invoice date are subject to a mandatory 50%
restocking fee. Discontinued items and/or items purchased beyond four (4) years from original invoice date cannot
be returned. Items returned for replacement or refund should be in original cartons and must be accompanied by
a packing slip with the following information:
· Returned Goods Authorization (RGA) number obtained from Returns Dept or Customer Service Dept.
· List of items returned · Reason(s) for return(s) · Copy of original invoice(s)
WAREHOUSE LOCATIONS
Main Office - Elyria, Ohio 800-321-5336
1. Cleveland, Ohio - 216-712-6973
2. Lawrence, Massachusetts - 978-683-1566
3. Annapolis Junction, Maryland - 800-342-4750
4. Atlanta, Georgia - 888-472-2930
5. Orlando, Florida - 407-896-1800
6. Franklin Park, Illinois - 847-678-9543
7. Blue Springs, Missouri - 877-990-1385
8. Stafford, Texas - 281-491-0351
9. Mexico City, Mexico - +52 (55) 5696-2451
10. Anaheim, California - 888-779-7292
11. Hayward, California - 510-264-9199
12. Portland, Oregon - 503-232-3480
13. Richmond, BC Canada - 604-241-0500
14. Mississauga, ON Canada - 905-565-1355
15. L’Assomption, PQ Canada - 514-990-2262
16. Denver, Colorado - 303-455-8175
17. Salt Lake City, Utah - 801-972-7056
Call (800) 321-5336
To open your internet account for order status,
shipping information, order confirmation
or net pricing register online at:
www.diamondproducts.com
Diamond Products logos are trademark of Diamond Products Limited. Permission granted to copy pages for business use only.

2 - Diamond Products

Transcription

Similar documents

14 - Diamond Products

Carborundum Abrasives for the Industrial Market

Die BUCHSTAVIER - Das Dosierte Leben

High Speed Cut-Off Wheels PDF

28` Hallmark Office Trailer

0A7876 Copyright September 16, 2002 Diamant Boart Inc. Printed In