Universal Trauma brochure

Transcription

Trauma
Shaped by the Hands
of a Surgeon
Our company was founded by a physician with a desire to invent
better product solutions, deliver better clinical outcomes and to thereby
improve the field of medicine.
Our products are derived from a close working partnership with
surgeons, physicians and healthcare experts from the entire
spectrum of the healthcare field. That has been the basis
of our success for nearly eight decades and will continue
to foster success into the future.
Stryker is one of the preeminent medical products and
services companies in the world. Our focus is on the
fundamentals and a relentless attention to details of not
only design and manufacture, but also of application and
outcomes. The output of our work supports the skills
and talents of the medical profession. And because of
this, we set our standards high and work to surpass
our own ambitious goals.
Universal Trauma System: Overview
The Leibinger Universal CMF Trauma System represents
the next generation of bone fixation for all Cranio-Maxillofacial
fractures, orthognathic, and reconstructive needs.
Universal Trauma
Universal Trauma System: Overview
The Leibinger Universal CMF Trauma System represents the next
generation of bone fixation for all Cranio-Maxillofacial fractures,
orthognathic, and reconstructive needs.
Technology & Innovations
SMARTLock Self-Locking Screws
The SmartLock design features a Low Profile
Cross-Pin Screw Head. This screw head is designed
to offer excellent friction fit and axial guidance.
• SMARTLock Locking Screws are manufactured
with fine threads on the underside of the screw
head, which upon insertion are designed to engage
the circular “lip” within the hole.
Screw Disc Delivery System
10º
10º
• The SMARTLock Locking Screw Technology in
mid-face and mandible may not only provide a
more stable plate-screw construct, but may also
decrease the possibility of infections or implant
failure if screws loosen.
• Incorporates SMARTLoad screw
delivery field for easy loading.
• Rotating disc exposes 5 screws
while protecting remaining
screws from spillage.
• Color coded according to
screw diameter.
Condensed Hole Spacing
Standard Hole Spacing
.50mm Profile Height
SMARTLoad Screw Delivery Field
• The new screw field design features
a recessed screw hole that may facilitate
easy loading of the screw by guiding
the tip of the screwdriver blade
accurately into the head of the screw.
• In addition, recessed screw holes
may decrease the amount of screw
spillage that can occur when loading.
• Customizable screw markers allow
for maximum storage of popular
screw sizes and designs.
GSP Graduated Stability Plates
Malleable Easy-to-contour Plates
• The Leibinger Graduated Stability
Plates offer the progressive level of
fixation required as the advancement
increases.
• These easy-to-contour Malleable
Low Profile Plates are offered in
both the Upper-Face and Mid-Face
Fixation Modules.
• The shorter plates used for limited
advancements are more malleable.
• These plates are an excellent micro
implant for the management of small
bone fragments in non-load bearing
regions of the skull.
• The longer plates used for extensive
advancements offer the increased
level of rigidity required for stable fixation.
• The design of the Malleable Low
Profile Plates may allow them to be
"bent on contact" in situ.
Modular Design Optimal Versatility
• Full Size
Sterilization
Container
• Comprehensive Implant
Modules for specific anatomic
regions of the skull
• Dedicated Instrument Trays
with color coded instruments
and silicone strips
• Optional modules available
Universal Trauma System: Design Options
The Leibinger Universal CMF Trauma System features
full and half size aluminum containers and implant
modules for your specific Cranio-Maxillofacial needs.
• Half Size
Sterilization
Container
1.2 Upper-Face Micro Fixation Module
The Leibinger Upper-Face Module
is primarily used for the fixation of
upper-face fractures and for the
stabilization of osteotomies and bone
grafts required in reconstructive surgery.
The Upper-Face Module has cross-over
application for specific mid-face and
dentoalveolar fixation needs.
Unique Features:
• Malleable Low Profile plates (Blue)
for Micro applications, Standard plates
(Gold) for Micro Plus applications
• Comprehensive implant options
specifically designed for the
upper-face region
• Universal screwdriver and blade for all
1.7mm and 1.2mm screws
1.2mm Screw Options
Self-Drilling
Self-Tapping
Self-Drilling
Self-Tapping
For use in both Standard (Gold) or Malleable (Blue) plates
1.2 Upper-Face Module Details
Upper-Face: Inlay of Module
Malleable Plates (Blue)
Profile height: 0.5mm
Standard Plates (Gold)
Upper-Face: Bottom of Module
Burr Hole Covers Standard (Gold)
Burr Hole Covers Malleable (Blue)
3D Plates Standard (Gold)
3D Plates Malleable (Blue)
Orbital Floor Plates Standard (Gold)
Orbital Floor Plates Malleable (Blue)
1.7 Mid-Face Mini Fixation Module
The Leibinger Mid-Face Module
is primarily used for the fixation of mid-face
fractures and the stabilization of osteotomies
and bone grafts. This comprehensive module
features technologies designed to maximize
flexibility and overall ease-of-use.
Unique Features:
• Comprehensive selection of Malleable (Blue)
or Standard (Gold) implants
• Mid-Face locking plates (Grey) that
accommodate all 1.7mm screws
• SMARTLock Screw Technology applied
to 1.7mm locking screws
• Universal screwdriver and blade for all
1.7mm and 1.2mm screws
• Simplified instrumentation
1.7mm Screw Options
Self-Drilling
Self-Tapping
Locking Screw
Locking (Grey) plates
Self-Drilling
Self-Tapping
Standard (Gold) plates
Self-Drilling
Self-Tapping
Malleable (Blue) plates
1.7 Mid-Face Module Details
Mid-Face: Inlay of Module
Malleable Plates (Blue)
Standard Plates (Gold)
Mid-Face: Optional Inlay
Dynamic Mesh
Malleable (Blue)
Standard (Gold)
Mid-Face: Bottom of Module
Locking Plates (Grey)
2.0 Mini-Plating Half Module
The Leibinger MP Module
is a 2.0mm system dedicated
to craniofacial fractures and the
stabilization of osteotomies. This
comprehensive module is available
in both full and half sizes.
Unique Features:
•
•
•
•
•
•
Color coded plates and screws
Comprehensive selection
of plates
Dedicated screwdriver for
all 2.0mm screws
Dedicated instrumentation
Cross-Pin screw head design
Optimized thread pitch on
4 and 5mm screws
2.0mm MP
Self-Tapping Screw
Dedicated MP Instrumentation
Würzburg
Steinhäuser
Plates
Plates
1.0mm Profile Height 0.80mm Profile Height
2.0 Mini-Plating Half Module
Mini-Plating:
Inlay of 1/2 Module
Würzburg Plates (Green)
Mini-Plating:
Bottom of 1/2 Module
Steinhäuser Plates (Green)
3-D Plates (Green)
Pre-bent Plates (Green)
2.0 Mini-Plating Full Module
The Leibinger MP Module
is a 2.0mm system dedicated to
craniofacial fractures and the
stabilization of osteotomies.
This comprehensive module is
available in both full and half sizes.
Unique Features:
•
•
•
•
•
•
Color coded plates and screws
Comprehensive selection of plates
Dedicated screwdriver for
all 2.0mm screws
Dedicated instrumentation
Cross-Pin screw head design
Optimized thread pitch on
4 and 5mm screws
Dedicated MP Instrumentation
2.0mm MP
Self-Tapping Screw
Würzburg
Steinhäuser
Plates
Plates
1.0mm Profile Height 0.80mm Profile Height
2.0 Mini-Plating Full Module Details
Mini-Plating:
Inlay of Full Module
Steinhäuser Plates (Green)
3-D Plates (Green)
Mini-Plating:
Bottom of Full Module
Pre-bent Plates (Green)
2.0/2.3 Mandible Fracture Fixation Module
The Leibinger Mandible Fracture Module
Unique Features:
• Low Profile Mini and 3D plates (Blue)
• Fracture plates (Gold) have laser etchings across
top of the plate to aid in top/bottom orientation
• Plates accommodate multiple screw diameters
and designs
• Universal screwdriver for 2.0mm, 2.3mm,
and 2.7mm screws
• 2.0mm and 2.3mm Compression plate options
(only to be used with neutral bone screws)
• Simplified instrumentation
• MMF Self-Drilling screws available in
full size module
Full Size Mandible
Fracture Module
2.0/2.3mm Screw Options
2.0mm
2.3mm
Neutral Bone Screw
2.0mm
2.3mm
SMARTLock Screw
Multiple diameter screw placement in all mandible plates.
1/2 Size Mandible Fracture Module
Optional Modules
MMF Screw Module
The Leibinger MMF screws are intended for use
as bone screws in temporary maxillomandibular
fixation, offering indirect stabilization of fractures
of the maxilla and mandible.
Unique Features
• Stainless steel design for
maximum strength
• Optimized head design for
securing wires or elastics
• Self-drilling for easy, one
step insertion
Auxiliary Screw Module
This customizable screw module is
a simple and convenient way to store
extra screws, drill bits and blades.
Unique Features:
• Customizable screw markers
• SMARTLoad screw field for
easy loading
Lag Screw Module
2.0mm diameter screws available in
24, 27 30, 33, 36, 39 and 42mm lengths.
Module features white laser etching
indicating part number and descriptions.
Unique Features:
• Includes all necessary instrumentation
for lag screw technique
• Dedicated module allows for
expedient access
Bone Graft Module
Holds 1.2 and 1.7 diameter screws
for bone grafting procedures.
Unique Features:
• SMARTLoad screw field for
easy loading
• Extensive screw field to hold
more screws
Screw Removal Kit
Assortment of screwdriver blades
for removal of Leibinger screws.
Unique Features:
• Universal screwdriver
handle included
• Comprehensive offering
of screwdriver blades
Mesh Tray
Dedicated tray for storage of all sizes
of Micro and Dynamic mesh.
Unique Features:
• A bi-directional measuring ruler
is built into the tray.
• Individual part numbers are etched
on lid for easy identification
2.0/2.3 Mandible
Fracture Module
Details
Mandible: Inlay of Full Module
3D Plates (Blue)
Mini Plates (Blue)
Mandible: Bottom of Full Module
Fracture Plates (Gold)
Compression Plates (Gold)
Mandible: Bottom of 1/2 Module
Mandible: Inlay of 1/2 Module
Fracture Plates (Gold)
3D Plates (Blue)
Compression Plates (Gold)
Mini Plates (Blue)
Procedural Guide
Contour & Application: Mid-Face Locking Plate
Step 1- Expose the fracture.
Step 2 - Use benders to contour Locking
Plates. Benders include plate pockets with
hole-pegs to reduce hole deformation.
Step 3 - Cut plate with right handle (R) in area
labeled “CUT.” Slide the plate into the cutting
area. Cut will take place within the window.
Step 4 - Insert drill guide into drill guide
handle and drill hole. *Drill guides must be
used when drilling holes intended to be used
with locking screws.
Step 5 - Only insert first screw about 75%
of the way, then drill the hole for the second
screw and insert second screw 100% until
locked into the plate. Finish the first screw
then proceed accordingly with the other screws.
Step 6 - Fracture fixation is complete.
Contour & Application: Mandible Fracture Plate
Step 1 - Expose fracture(s).
Step 2 - Use benders to contour Fracture
Plate. Benders include plate pockets to
reduce hole deformation.
Step 3 - Cut Fracture Plate with the right
handle (R) in the area labeled "CUT.” Slide
the plate through the cutter from left to
right. Cut will take place within the window.
Step 4 - Insert the drill guide through
trocar and drill hole.
Step 5 - Measure desired screw length
using a depth gauge.
Step 6 - Insert screw and repeat process for
each screw until fracture fixation is complete.
Important Notice: The materials contained in this booklet have been provided for general educational information purposes only. The information contained in this booklet cannot and
should not replace the independent medical judgment of the treating physician. As a manufacturer, Stryker does not provide medical advice or services and does not recommend specific
technique or instruction. It is always the responsibility of the treating physician to determine the appropriate treatment and technique, based on the physician's medical knowledge and
the individual circumstances of the particular case. It is also the treating physician's sole responsibility to inform the patient about potential risks, complications, and benefits of certain
products and procedures. In addition, the information contained herein is not intended to and should not replace the instructions-for-use provided with the Leibinger Universal System. The
treating physician should review the instructions-for-use in their entirety before using any Stryker product because the materials contained herein may not include all relevant potential
risks and complications. Under no circumstances should the material in this booklet be provided to the patient unless the treating physician has reviewed the material and approved its
use for the particular patient. Please be aware that health care information can change quickly and the treating physician is responsible for confirming that the information contained
herein is current. For further information about the Leibinger Universal System, please contact Stryker Craniomaxillofacial at 800 962 6558.
Dynamic Mesh
Unique Features
Dynamic Mesh has properties to facilitate • Standard (Gold - .60mm profile height)
controlled, three-dimensional contouring
and Malleable Low Profile (Blue - .30mm
while maintaining adequate rigidity for bone
profile height) designs
defects of varied size and location. Dynamic • Dedicated screw holes for many options
Mesh can be shaped to fit most threein screw placement
dimensional bone surfaces without
• Easy to cut and accurately contour
unwanted wrinkled or overlapped areas.
to anatomical structures
• Instrumentation for “in situ” cutting
For use with 1.2mm screws
Malleable (.30mm profile height)
54-00340 (40mm x 40mm)
54-00342 (85mm x 85mm)
54-00343 (120mm x 120mm)
For use with 1.7mm screws
Standard (.60mm profile height)
54-00642 (90mm x 90mm)
54-00643 (120mm x 120mm)
54-00641 (200mm x 200mm)
Universal Orthognathic
The Leibinger Universal Orthognathic System incorporates
enhanced technologies to create a comprehensive
system. This system accommodates a wide range
of surgical techniques used for the management of
dentofacial (jaw) deformities.
Universal Mandible Recon
The Leibinger Universal Mandible Reconstruction
System represents the next generation of bone
fixation that offers enhanced flexibility and cutting
edge technology, allowing the surgeon complete
control during mandibular reconstruction.
54-00344 (40mm x 40mm)
54-00346 (90mm x 90mm)
54-00345 (120mm x 120mm)
54-00646 (90mm x 90mm)
54-00645 (120mm x 120mm)
54-00647 (200mm x 200mm)
Features
• Three “L”plate designs: Standard,
Malleable and GSP
• Pre-bent advancement plates
• SMARTLock Screw Technology applied
to 1.7mm, 2.0mm, and 2.3mm screws
Features:
• Plates accommodate multiple screw
diameters and designs
• Universal screwdriver blade for 2.0mm,
2.3mm, and 2.7mm screws
• Low profile primary reconstruction plates
• Precontoured plates offer better
handling and system management
Micro Mesh
Micro Mesh is an ultra-thin mesh used
for defect bridging of the skull/skull base
and orbital region.
Unique Features
• Screws may be inserted directly through
the mesh without the need for a dedicated
screw hole
• Available in two ultra-thin sizes: .10mm
(Blue) and .20mm (Gold)
• If fixation with bone screws is not possible
or preferred, suture material may be used
For use with a screw range of 1.0mm to 1.9mm
54-00260 (120mm x 120mm)
54-00261 (120mm x 60mm)
54-00262 (60mm x 60mm)
54-00270 (120mm x 120mm)
54-00271 (120mm x 60mm)
54-00272 (60mm x 60mm)
Medical Modeling
CT-Based Anatomical Bone Models facilitate
pre-surgical planning in complex clinical settings.
These accurate 3D models can increase OR
efficiency through pre-operative planning. These
medical models allow the pre-bending of plates,
and precise depth measurement for screws.
Colorado Needle
The Colorado Microdissection Needle has an ultra-sharp
tip for clean, precise soft tissue dissection. The heat
resistant tungsten alloy is designed to maintain tip
sharpness, and is highly polished for easy cleaning.
Leibinger Instrument Sets
Leibinger instruments have a storied history of
quality and dependability. Each instrument is
made with close attention to clinical application,
balance, and precision.
Features
•
•
•
•
Useful in the planning of:
Distraction osteogenesis
Orthognathic surgery
Skull base tumor access
Mandibular and cranial vault
reconstruction
Applications
• Precise electro-cutting and
electrocoagulation during
electrosurgery
Features
• Ergonomic design for easy handling
• Precise manufacturing process ensures
instruments meet our exacting standards
• Balance of each instrument is appropriate
for its clinical application
Ordering Information
1.2mm Upper Face
1.7mm Mid Face
1.7mm Mid Face
1.2mm Modules & Inlays
29-12002 Upper-Face Fixation Module, empty,
without inlay
29-12003 Inlay for Upper-Face Plates
1.7mm Modules & Inlays
29-17102 Mid-Face Fixation Module, empty,
without inlay
29-17003 Inlay for Mid-Face Plates
29-17004 Inlay For Mid-Face Plates, half size,
(optional)
29-17005 Inlay For Mid-Face Mesh, half size,
(optional)
1.7mm Self-Tapping Screws, Gold (5/Pkg)
50-17003 1.7 x 3mm
50-17004 1.7 x 4mm
50-17005 1.7 x 5mm
50-17006 1.7 x 6mm
50-17008 1.7 x 8mm
50-17010 1.7 x 10mm
50-17012 1.7 x 12mm
1.7mm Malleable Plates, Blue
55-04724 Straight Plate, condensed, 24 Hole
55-04720 Straight Plate, 20-Hole
55-03731 3-D Plate, 2 x 2 Hole
55-03733 3-D Plate, 6 x 2 Hole
1.7mm Self-Drilling Screws, Silver (5/Pkg)
50-17903 1.7 x 3mm
50-17904 1.7 x 4mm
50-17905 1.7 x 5mm
50-17906 1.7 x 6mm
1.7mm Standard Plates, Gold
55-06704 Straight Plate, 4 Hole, with Bar
55-06708 Straight Plate, 8 hole
55-06724 Straight Plate, 24 Hole
55-05188 Curved Plate, 6 Hole, with bar
55-06754 Curved Plate, 4 Hole, with bar
55-06750 Curved Plate, 10 Hole
55-06771 T Plate, 5 Hole
55-06731 3-D Plate, 2 x 2 Hole
55-06733 3-D Plate, 6 x 2 Hole
55-05151 Y Plate, 5 Hole, 4mm Bar
55-05164 Double Y Plate, 7 Hole
Screw Disc
29-17345 Screw Disc for 1.7mm self-tapping
or self-drilling screws (Optional)
1.2mm Malleable Plates, Blue
55-04424 Straight Plate, condensed, 24 Hole
55-04231 3-D Plate, 2 x 2 Hole
55-04233 3-D Plate, 6 x 2 Hole
55-04235 3-D Plate, 6 x 6 Hole
55-04237 3-D plate, 10 x 10 Hole
55-04250 Orbital plate, 10 Hole
55-06376 Burr Hole Cover, 7mm Diam.
1.2mm Standard Plates, Gold
55-06250 Orbital Plate, 10 Hole
55-06260 L Plate 90° Left, 8 Hole
55-06261 L Plate 90° Right, 8 Hole
55-06270 T Plate, 7 Hole
55-06231 3-D Plate, 2 x 2 Hole
55-06233 3-D Plate, 6 x 2 Hole
55-06235 3-D Plate, 6 x 6 Hole
55-06237 3-D Plate, 10 x10 Hole
54-03003 Orbital Floor Plate, Isolated, small, 0.3mm
54-03002 Orbital Floor Plate, Basic, medium, 0.3mm
54-04002 Orbital Floor Plate, Basic, medium, 0.4mm
54-03000 Template Combined, Orbital Floor Plate,
Small/medium
54-03001 Orbital Floor Plate, Complex, Large, 0.3mm
54-04001 Orbital Floor Plate, Complex, Large, 0.4mm
54-04000 Template, Orbital Floor Plate, Large
55-06254 Orbital Plate, 4 Hole
50-12003 1.2 x 3mm
50-12004 1.2 x 4mm
50-12005 1.2 x 5mm
50-12006 1.2 x 6mm
50-12008 1.2 x 8mm
50-12010 1.2 x 10mm
50-12012 1.2 x 12mm
50-12903 1.2 x 3mm
50-12904 1.2 x 4mm
Screw Disc
29-12345 Screw Disc for 1.2 self-tapping
or self-drilling screws (Optional)
1.4mm Emergency Screws, Purple (5/Pkg)
50-14003 1.4 x 3mm
50-14005 1.4 x 5mm
50-14007 1.4 x 7mm (Optional)
50-14009 1.4 x 9mm (Optional)
Twist Drills for 1.2mm Screws
60-09504 0.9 x 46mm, 4mm working length,
Stryker End
Stryker End
Stryker End
1.7mm Malleable L Plates, Blue
55-04760 L Plate, 2mm Bar, 100° Left, 5 Hole
55-04761 L Plate, 2mm Bar, 100° Right, 5 Hole
55-04762 L Plate, 5mm Bar 100° Left, 5 Hole
1.7mm Standard L Plates, Gold
1.7mm GSP L Plates, Gold
1.7mm Locking Plates, Grey
55-05758 Curved Plate, 8 Hole
55-05731 3-D Plate, 2 x 2 Hole
55-05733 3-D Plate, 6 x 2 Hole
55-05779 Y Plate, 8 Hole
55-05761 L Plate, 5 Hole, 2mm Bar
50-19003 1.9 x 3mm
50-19005 1.9 x 5mm
50-19007 1.9 x 7mm (Optional)
50-19009 1.9 x 9mm (Optional)
1.7mm Locking Screws. Grey (5/Pkg)
50-17504 1.7 x 4mm
50-17505 1.7 x 5mm
50-17506 1.7 x 6mm
Twist Drills for 1.7mm Screws
Stryker End
Stryker End
Stryker End
Stryker End
Stryker End
Upper-Face/Mid-Face Instruments
29-13031 Upper-Face/Mid-Face Instrument Tray
01-08110 Plate/Screw Forceps
62-12176 Upperface/Midface Plate Bender, Left
62-12175 Upperface/Midface Plate
Bender/Cutter, Right
62-12173 3-Prong Bender
62-18330 In-Situ Plate Cutter
62-20285 Screwdriver Handle, Metal
62-12170 Upperface/Midface Screwdriver Blade
60-20012 Bone Repositioning Pin Twist Drill,
2.0mm diameter
62-32440 Bone Repositioning Pin
62-20000 Universal Drill Guide Handle
62-17517 Drill Guide For 1.7mm Locking Screws
Optional
29-13022
01-08105
01-08115
36-00726
62-18500
Midface Instruments
Accessory Tray
Locking Plate Forceps, Straight
Locking Plate Forceps, Angled
Plate Bending Pliers, 13.5cm
Screw Diameter and Length
Measuring Block
2.0mm Mini-Plating
2.0/2.3mm Mandible Fracture
2.0mm Mini-Plating Modules & Inlays
Mandible Modules & Inlays
29-20200 2.0mm MP Module, Full Size, empty, without Inlay 29-13051 Universal Mandible Fracture Module,
29-20201 Inlay for 2.0mm MP Plates, Full Size
Full Size, empty
29-20250 2.0mm MP Module, Half Size, empty, without Inlay
29-13053 Inlay for Mandible Fracture Plates, Full Size
29-20251 Inlay for 2.0mm MP Plates, Half Size
29-20232 Universal Mandible Fracture Module,
Half Size, empty
2.0mm Mini Plates
29-20231 Inlay for Mandible Fracture Plates, Half Size
55-06310 3-D Plate, 2 x 2 Hole, Square, 0.6mm
55-06312 3-D Plate, 2 x 2 Hole, Rectangle, 0.6mm
55-06320 3-D Plate, 3 x 2 Hole, Square, 0.6mm
2.0mm Mini Plates, Blue
55-08203 Straight Plate, 4 Hole, 4mm Bar
55-10503 Mini Plate, 8mm Bar, 4 Hole
55-10504 Mini Plate, 4 Hole
55-08205 Straight Plate, 4 Hole, 8mm Bar
55-10505 Mini Plate with Bar, 4 hole
55-10507 Mini Plate with Bar, 6 Hole
55-08230 L Plate, 4 Hole, w/o Bar, Right
55-10515 Mini Plate, condensed 16 Hole
55-08231 L Plate, 4 Hole, w/o Bar, Left
55-08232 L Plate, 4 Hole, 8mm Bar, Right
55-08233 L Plate, 4 Hole, 8mm Bar, Left
2.0/2.3mm Fracture Plates, Gold
55-15504 Fracture Plate, 4 Hole
55-15505 Fracture Plate with Bar, 4 Hole
55-08240 T Plate, 6 Hole, 90˚
55-15507 Fracture Plate with Bar, 6 Hole
55-08250 Y Plate, 5 Hole
55-15524 Fracture Plate C-Shaped, 4 Hole
55-08262 Double Y Plate, 6 Hole, 8mm Bar
55-15526 Angled Fracture Plate,115°, 6 Hole
55-08510 Straight Plate, 30 Hole, 0.80mm
55-15536 Angled Fracture Plate, 140°, 6 Hole
55-08520 L Plate, 9 Hole, 0.80mm, Right
55-08521 L Plate, 9 Hole, 0.80mm, Left
2.0mm 3-D Plates, Blue
55-08542 T Plate, 8 Hole, 0.80mm
55-10532 3-D Plate, Rectangular, 3 x 2 Hole
55-08579 Y Plate, 8 Hole, 0.80mm
55-10542 3-D Plate, Square, 4 x 2 Hole
55-08586 Curved Plate, 12 Hole, 0.80mm
55-10562 3-D Plate, Curved, 6 x 2 Hole
55-09104 Chin Plate, 4mm Bar
2.0mm Compression Plates, Gold
55-15570 4 Hole for 2.0mm screws
55-10563 Straight Plate, 4 Hole, Reinforced Bar
2.0mm Self-Tapping Screws, Green (5/Pkg)
50-20704 2.0 x 4mm
50-20705 2.0 x 5mm
50-20706 2.0 x 6mm
50-20404 2.0 x 4mm
50-20708 2.0 x 8mm
50-20405 2.0 x 5mm
50-20710 2.0 x 10mm
50-20712 2.0 x 12mm
50-20406 2.0 x 6mm
50-20714 2.0 x 14mm
50-20408 2.0 x 8mm
50-20716 2.0 x 16mm
50-20410 2.0 x 10mm
50-20718 2.0 x 18mm
50-20412 2.0 x 12mm
50-20720 2.0 x 20mm
50-20414 2.0 x 14mm
50-20416 2.0 x 16mm
50-20418 2.0 x 18mm
50-20904 2.0 x 4mm
50-20420 2.0 x 20mm
50-20905 2.0 x 5mm
50-20906 2.0 x 6mm
2.0mm Locking Screws, Grey (5/Pkg)
50-20504 2.0 x 4mm
50-23706 2. 3 x 6mm
50-20505 2.0 x 5mm
50-23708 2.3 x 8mm
50-20506 2.0 x 6mm
50-23710 2.3 x 10mm
50-20508 2.0 x 8mm
50-23712 2.3 x 12mm
50-20510 2.0 x 10mm
50-23714 2.3 x 14mm
50-20512 2.0 x 12mm
50-23716 2.3 x 16mm
50-20514 2.0 x 14mm
Twist Drills
50-20516 2.0 x 16mm
60-15920 1.5 x 107.5mm, 20mm working length, Stryker End 50-20518 2.0 x 18mm
60-15105 1.5 x 50mm, 5mm working length, Stryker End
50-20520 2.0 x 20mm
60-15486 1.5mm x 21mm, 8mm working length,
50-23404 2.3 x 4mm
90˚, Dental End
50-23406 2.3 x 6mm
60-15496 1.5mm x 29.2mm, 16mm working length,
50-23408 2.3 x 8mm
90˚, Dental End
50-23410 2.3 x 10mm
Mini-Plating Instruments
50-23412 2.3 x 12mm
29-13070 2.0mm MP Instrument Tray
50-23414 2.3 x 14mm
01-08115 Locking Plate Forceps, Angled
50-23416 2.3 x 16mm
36-00726 Bending Pliers
50-23418 2.3 x 18mm
01-08070 3 Prong Bender
50-23420 2.3 x 20mm
62-18335 2.0mm MP Plate Cutter
62-20295 Screwdriver Handle, Revolving/Rigid
60-20140 2.0mm MP Screwdriver Blade
62-20233 2.0mm MP Screwdriver Blade, 90˚
01-08502 Trocar Handle
01-08506 Trocar
01-08508 Trocar Drill Guide
01-08504 Cheek Retractor
62-08732 Depth Measuring Gauge
2.0/2.3mm Mandible Fracture
2.3mm Locking Screws, Grey (5/Pkg)
50-23504 2.3 x 4mm
50-23506 2.3 x 6mm
50-23508 2.3 x 8mm
50-23510 2.3 x 10mm
50-23512 2.3 x 12mm
50-23514 2.3 x 14mm
50-23516 2.3 x 16mm
50-23518 2.3 x 18mm
50-23520 2.3 x 20mm
2.7mm Emergency Screws, Gold (5/Pkg)
50-27405 2.7 x 5mm
50-27408 2.7 x 8mm
50-27410 2.7 x 10mm
50-27412 2.7 x 12mm
50-27414 2.7 x 14mm
50-27416 2.7 x 16mm
50-27418 2.7 x 18mm
50-27420 2.7 x 20mm
2.7mm Emergency Locking Screws, Grey (5/Pkg)
50-27505 2.7 x 5mm
50-27508 2.7 x 8mm
50-27510 2.7 x 10mm
50-27512 2.7 x 12mm
50-27514 2.7 x 14mm
50-27516 2.7 x 16mm
50-27518 2.7 x 18mm
50-27520 2.7 x 20mm
MMF Self-Drilling Screws, Silver (4/Pkg)
50-20358 2.0 x 8mm
50-20362 2.0 x 12mm
Twist Drills for 2.0/2.3mm Screws
Luhr Fritzemeier Drills for 2.0/2.3mm Screws
60-16908 1.6 x 19mm, 8mm working length, 90˚, Dental End
62-92023 2.0/2.3mm, 90˚ Screwdriver Blade
Mandible
29-13025
62-20295
62-20290
62-20130
62-20135
64-00242
64-00243
62-00316
62-00314
62-00303
01-08731
62-02000
62-02001
62-02300
62-02301
01-08115
Optional
62-00441
62-20500
62-23150
62-00410
62-00411
Instruments
Mandible Instrument Tray
Screwdriver Handle, Revolving/Rigid
Screwdriver Handle, Ratchet
Screwdriver Blade (2.0/2.3)
MMF Screwdriver Blade w/Grasping Sleeve
Bender, Left
Bender/Cutter, Right
Universal Mandible Trocar Handle, Fixed
Cheek Retractor, Fixed
Trocar
Depth Measuring Gauge
2.0mm Trocar Drill Guide, Centric
2.0mm Trocar Drill Guide, Eccentric
2.3mm Trocar Drill Guide, Centric
2.3mm Trocar Drill Guide, Eccentric
Locking Plate Forceps, Angled
Mandible Instruments
Cheek Retractor, Variable
Tap 2.0mm
Tap 2.3mm
Plate Holding Cap for Universal Fracture Plates
Plate Holding Cap for Universal Mini Plates
A surgeon must always rely on his or her own
professional clinical judgment when deciding whether
to use a particular product when treating a particular
patient. Stryker does not dispense medical advice and
recommends that surgeons be trained in the use of any
particular product before using it in surgery.
The information presented is intended to demonstrate
the breadth of Stryker product offerings. A surgeon
must always refer to the package insert, product label
and/or instructions for use before using any Stryker
product. Products may not be available in all markets
because product availability is subject to the regulatory
and/or medical practices in individual markets. Please
contact your Stryker representative if you have questions
about the availability of Stryker products in your area.
Stryker Corporation or its divisions or other corporate
affiliated entities own, use or have applied for the following
trademark(s) or service mark(s): Leibinger, SMARTLock,
Stryker. All other trademarks are trademarks of their
respective owners or holders.
Literature Number: 9410-020-050 Rev. E
UnDe/P.S.
Copyright © 2011 Stryker
Printed in USA
Stryker Craniomaxillofacial
Kalamazoo, MI 49002 USA
t: 269 324 5346
toll free: 800 962 6558
f: 877 648 7114
www.stryker.com

Universal Trauma brochure

Transcription

Similar documents

upper-face module

Changed Prostheses List - Private Healthcare Australia

- Stryker MedEd

Reference Guide for • Upper-Face • Mid-Face