upper-face module

Transcription

upper-face module

CMF
SMARTLockTM Locking Screw Technology
1000-915-000 Rev. A
Universal Fixation System: Overview
Universal Fixation System: Design Options
The Stryker Leibinger Universal Fixation System represents the next generation
of bone fixation for all Cranio-Maxillofacial fractures, orthognathic, and reconstructive
needs. The Universal Fixation System includes these unique features and benefits:
•
•
•
•
•
The Stryker Leibinger Universal Fixation System
features newly designed full and half size aluminum
containers and implant modules for your specific
Cranio-Maxillofacial needs.
Implant modules designed for specific anatomical regions to enhance the ease-of-use.
Comprehensive implant selection in a flexible modular system.
SMARTLock screw technology applied throughout the entire system for optimal rigid fixation.
A system that allows for customizable options to fit each surgeon’s specific needs and techniques.
Ergonomically redesigned instrumentation for improved handling.
Full Size
Sterilization
Container
Comprehensive Implant
Modules for specific anatomic
regions of the skull
New Technology & Innovations
Auxiliary Screw
Module available for
1.2 & 1.7mm screws
Comprehensive
Mesh Tray
The Universal Fixation System is a redesign, not a repackaging of our implant systems.
It represents the latest available technology for the internal fixation of all Cranio-Maxillofacial needs.
The applied technology provides the surgeon with the innovations needed to achieve the
appropriate level of fixation in each clinical setting.
SMARTLock
SCREW TECHNOLOGY
10º
10º
1 . 7 m m G R A D U AT E D S TA B I L I T Y P L AT E S
The SmartLock design features a unique Low Profile Cross-Pin
Screw Head. This screw head offers superior friction
fit and axial guidance compared to other available screw heads.
• The only one-step locking screw with a locking capability up to
10˚ of angulation for the Mid-Face and Mandible locking plates.
• SMARTLock Locking Screws are manufactured with fine
threads on the underside of the screw head, which upon
insertion engage the circular “lip” within the hole.
• The SMARTLock Locking Screw Technology in mid-face
and mandible applications not only provides a more stable
plate-screw construct, but also decreases the possibility of
infections or implant failure caused when screws loosen.
The Stryker Leibinger Graduated Stability Plates offer the
progressive level of fixation required as the LeFort I advancement
increases. This built-in progressive stability is a unique feature for
optimal Lefort I fixation.
• The shorter plates used for limited
LeFort I advancements are more
malleable for ease of use.
• The longer plates used for
extensive LeFort I advancements
provide the increased level of rigidity
required for stable fixation.
Providing the
level of stability
when and where
you need it.
Accessory Tray available
for optional instruments,
drills & saws
Half Size
Sterilization
Container
LOW PROFILE PLATES
.60mm Standard
.50mm Malleable
• These easy-to-contour Malleable
Low Profile Plates are offered
in both the Upper-Face and
Mid-Face Fixation Modules.
• These plates are the ideal micro
implant for the management of
small bone fragments in non-load
bearing regions of the skull.
SMARTLoad
S C R E W
F I E L D
• The new screw field design
features a recessed screw hole
that facilitates easy loading of the
screw by guiding the tip of the
screwdriver blade accurately into
the head of the screw.
• In addition, recessed screw holes
decrease the amount of screw
spillage that can occur when loading.
Condensed Hole Spacing
Standard Hole Spacing
• The malleable design enables
the plates to be “bent on
contact” in situ.
• Customizable screw markers allow
for maximum storage of popular
screw sizes and designs.
Dedicated Instrument Tray
with color coded instruments
and silicone strips
Optional Pre-bent
LeFort I
Orthognathic Inlay
Comprehensive
Orthognathic
Module
Which modules work best for you?
UPPER-FACE PLATES
UPPER-FACE MODULE
The Stryker Leibinger Upper-Face Module is primarily used for
the fixation of upper-face fractures and for the stabilization of
osteotomies and bone grafts required in reconstructive surgery.
The Upper-Face Module has cross-over application for specific
mid-face and dento-alveolar fixation needs.
Upper-Face: Inlay of Module
Unique Features:
Standard Plates (Gold)
Profile height: .60mm
Malleable Plates (Blue)
• Malleable Low Profile plates (Blue) for Micro applications,
Standard plates (Gold) for Micro Plus applications
• SMARTLock Screw Technology applied to 1.2
self-drilling and self-tapping screws
• Comprehensive implant options specifically designed
for the upper-face region
• Universal screwdriver for 1.2mm and 1.7mm screws
• Simplified instrumentation
Applications:
•
•
•
•
•
Fracture Management
Cranial vault fractures
Orbital fractures
Frontal sinus fractures
Naso-orbital-ethmoid fractures
Zygomatic complex fractures
•
•
•
•
Reconstruction of Defects and Deformities
Cranial vault region
Orbital region
Zygomatic region
Dento-alveolar region
Upper-Face Standard Inlay
Upper-Face: Bottom of Module
Burr Hole Covers Standard (Gold)
Burr Hole Covers Malleable (Blue)
55-04235 55-06235
55-04237 55-06237
3D Plates Standard (Gold)
1.2mm Screw Options
3D Plates Malleable (Blue)
54-03003
54-03002
54-04002
54-03001
54-04001
Orbital Floor Plates Standard (Gold)
Self-Drilling
Self-Tapping
Self-Drilling
Self-Tapping
For use in both Standard (Gold) or Malleable (Blue) plates
Orbital Floor Plates Malleable (Blue)
Upper-Face Bottom of Module
MID-FACE PLATES
MID-FACE MODULE
The Stryker Leibinger Mid-Face Module is primarily used
for the fixation of mid-face fractures and the stabilization of
osteotomies and bone grafts. This comprehensive module
features new technologies that maximize flexibility and
overall ease-of-use.
Mid-Face: Inlay of Module
Malleable Plates (Blue)
Standard Plates (Gold)
• Comprehensive selection of Malleable (Blue)
or Standard (Gold) implants
• Mid-Face locking plates (Gray) that accommodate
all 1.7mm screws
• SMARTLock Screw Technology applied to 1.7mm
self-drilling, self-tapping and locking screws
• Universal screwdriver for all 1.7mm and 1.2mm screws
Standard
G.S.P.
Malleable
55-06760 55-06761 55-06762 55-06763
55-07760 55-07761 55-07762 55-07763
55-04760 55-04761 55-04762 55-04763
55-06764 55-06765
55-07764 55-07765
55-04764 55-04765
55-06766
55-07766
55-04766
55-06767
55-07767
55-04767
Applications:
Fracture Management
• LeFort I fractures
• Zygomatic complex fractures
• Cranial vault fractures
Mid-Face Standard Inlay
Reconstruction of Defects and Deformities
• Maxillary region
• Zygomatic region
• Cranial Vault region
Mid-Face: Bottom of Module
Optional Inventory
Locking Plates (Gray)
1.7mm Screw Options
Self-Drilling
Self-Tapping
Locking Screw
Locking (Gray) plates
Self-Drilling
Self-Tapping
Standard (Gold) plates
Self-Drilling
Self-Tapping
Malleable (Blue) plates
Mid-Face Bottom of Module
Mid-Face Module
Unique Features:
Orthognathic Module
ORTHOGNATHIC PLATES
ORTHOGNATHIC MODULE
The Stryker Leibinger Orthognathic Module incorporates
enhanced technologies to create a comprehensive system.
This system accommodates a wide-range of surgical
techniques used for the management of dentofacial (jaw)
deformities.
1.7mm Unique Features:
•
•
•
•
Orthognathic: Basic Inlay
Standard
G.S.P.
Malleable
55-06760 55-06761 55-06762 55-06763
55-07760 55-07761 55-07762 55-07763
55-04760 55-04761 55-04762 55-04763
Orthognathic: Pre-bent Lefort I Inlay
55-06764 55-06765
55-07764 55-07765
55-04764 55-04765
Three “L” plate designs: Standard, Malleable and GSP
Pre-bent LeFort I and Genioplasty Plates
Locking plates (Gray) that accommodate all 1.7mm screws
SMARTLock screw technology applied to 1.7mm, 2.0mm
and 2.3mm screws
55-06766
55-07766
55-04766
55-06767
55-07767
55-04767
1.7mm Applications:
LeFort I osteotomy fixation
Genioplasty (chin osteotomy)
Dento-alveolar/segmental osteotomies
Bone graft fixation
Orthognathic Module
•
•
•
•
2.0/2.3mm Unique Features:
• Sagittal split osteotomy plates
• SMARTLock locking 2.0mm and 2.3mm
screws for sagittal split osteotomies
• Dedicated orthognathic trocar system
and drill bits
• Right-angle instrumentation
Orthognathic: Bottom of Module
Orthognathic Module
2.0/2.3mm Applications:
• Sagittal split osteotomy fixation
55-10704
55-10706
55-07734
55-10708
55-10710
55-10712
55-06734
Sagittal Split Plates
60-16820
Screw Measuring Block
60-19820
Mandible Fracture Module
FRACTURE PLATES
MANDIBLE FRACTURE MODULE
The Stryker Leibinger Universal Mandible
Fracture Module is the most comprehensive
system on the market.
Unique Features:
• Low Profile Mini and 3D plates (Blue)
• Fracture plates (Gold) have laser etchings across
top of the plate to aid in top/bottom orientation
• All plates accommodate multiple screw diameters
and designs
• Universal screwdriver for 2.0mm, 2.3mm and
2.7mm screws
• 2.0mm and 2.3mm Compression plate options
(only to be used with neutral bone screws)
2.0/2.3mm Mini Plates
Profile height: 1.0mm
Order Qty: Package of 1
2.0/2.3mm Fracture Plates
4 Holes
4 holes
4 holes with bar
4 holes
4 holes with bar
55-10503 H
55-10504 F H
55-10505 F
55-15504 F
55-15505 F H
6 holes
6 holes with bar
55-15506 F H
55-15507 F
6 holes
6 holes
55-10506 F H
55-10507 H
16 holes
55-10515 H
14 holes
55-15514 F H
16 holes
55-10516 F H
Applications:
2.0/2.3mm 3-D Plates
Profile height: 1.0mm Qty: Package of 1
Mini and 3D Plates
• Tension band and/or Champy technique
• Mandibular angle fractures
• Subcondylar fractures
F
4 hole C-Shaped
6 hole angle, 140˚
55-15524 F
55-15536 F H
Full Mandibular Fracture Module
6 hole angle, 115˚
3x2 holes
4x2 holes
55-10532 F
55-10542 F H
55-15526 F
2.0/2.3mm Compression Plates
2.0mm
2.3mm
Neutral Bone Screw
2.0mm
6x2 holes
2.3mm
55-10562 F H
SMARTLock Screw
4 holes, 2.0mm
6 holes, 2.0mm
55-15570 F H
55-15580 F H
4 holes, 2.3mm
6 holes, 2.3mm
55-15575 H
55-15585 H
Multiple diameter screw placement in all mandible plates.
Plate/Module Availability
Rigid-Revolving Screwdriver handle
F Available only in Full-size module
Single screwdriver blade for all screws
(2.0/2.3/2.7mm Emergency)
H Available only in Half-size module
H
Half Mandibular Fracture Module
Plates Not Actual Size
Mandible Fracture Module
Fracture Plates
• Fractures of all mandibular regions
Mandible Recon Module
RECON PLATES
MANDIBLE RECON MODULE
2.0/2.3mm Straight
Primary Reconstruction Plates
The Stryker Leibinger Mandible Recon Module
incorporates cutting-edge technology that allows
the surgeon complete control during mandibular
reconstruction.
2.0/2.3mm Straight Reconstruction Plates
11 holes
55-28911
11 holes
55-15911
Unique Features:
• Plates accommodate multiple screw diameters
and designs
• Laser etchings across the top of the plate to aid in
top/bottom orientation
• Universal screwdriver blade for 2.0mm, 2.3mm
and 2.7mm screws
• Low profile precontoured plates minimize
bending time
17 holes
Condyles
55-28917
17 holes
2.0/2.3mm Hemi Reconstruction Plates
55-15917
Medial View
Lateral View
Temporary Condylar Prostheses with
plate pockets on back side.
56-25001 Left
56-25002 Right
Temporary condylar prostheses
are attached to the
Reconstruction Plate with
fastening screws.
2.0/2.3mm Hemi Primary Reconstruction Plates
Applications:
6+17
55-28920 Right
Primary Reconstruction Plates
• Reconstruction with vascularized or
non-vascularized bone graft(s)
• Repair of comminuted fractures
*Not recommended for defect bridging
without bone graft(s)
5+17
55-15920 Right
Applications:
Reconstruction Plates
• Reconstruction with vascularized or
non-vascularized bone graft(s)
• Defect bridging without bone graft(s)
• Repair of comminuted fractures
17+6
55-28922 Left
2.0/2.3mm Full Reconstruction Plates
17+5
6+13+6
55-15922 Left
Precontoured Plates
55-28934
6+15+6
55-28932
6+17+6
Temporary Recon Screw Holder
55-28930
Mandible Recon Module
Customized reconstruction module
accommodates all mandibular
reconstruction needs
DynamicMesh/Micro Mesh TRAY
DeltaSystem
DynamicMesh
RESORBABLE IMPLANT TECHNOLOGY
DynamicMesh has optimal properties to facilitate unparalleled,
three-dimensional contouring while maintaining adequate rigidity
for bone defects of varied size and location. DynamicMesh can
be shaped to fit most three-dimensional bone surfaces without
unwanted wrinkled or overlapped areas.
Unique Features:
The Stryker Leibinger DeltaSystem Resorbable
Module provides a comprehensive alternative
to titanium for cranio-maxillofacial fixation.
•
•
•
•
Unique Material:
Malleable (.30mm profile height)
54-00344 (40mm x 40mm)
54-00346 (90mm x 90mm)
54-00345 (120mm x 120mm)
• Orbital wall trauma/reconstruction
• Frontal sinus trauma/reconstruction
• Cranioplasties and the reconstruction of skull defects
Standard (.60mm profile height)
54-00642 (90mm x 90mm)
54-00643 (120mm x 120mm)
54-00641 (200mm x 200mm)
54-00646 (90mm x 90mm)
54-00645 (120mm x 120mm)
54-00647 (200mm x 200mm)
e ngt h
LA
CTID
ab
LID
E
10
O
5
ID
E
ili t y
G LY
C
Ab
tio n
Delta
System
T
Torque-limiting screwdrivers
Innovative screw head design
Simplified water bath system
Efficient screw delivery system
Applications:
E
85
ur
Applications:
54-00340 (40mm x 40mm)
54-00342 (85mm x 85mm)
54-00343 (120mm x 120mm)
L-
C
D-LA
For use with 1.7mm screws
S tr
C onto
For use with 1.2mm screws
• The DeltaSystem tripolymer is a composition
of poly L-Lactide/D-Lactide/Glycolide having
a molecular ratio of 85/5/10.The resulting
tripolymer is an extraordinary combination
of strength, contourability and absorption
well-suited for cranio-maxillofacial surgery.
rp
Unique Features:
• Standard (Gold - .60mm profile height) and Malleable
Low Profile (Blue - .30mm profile height) designs
• Dedicated screw holes for many options in screw placement
• Easy to cut and accurately contour to anatomical structures
• Instrumentation for “in situ” cutting
• A bi-directional measuring ruler is built into the tray
OPTIONAL MODULES
so
• Indicated for the fixation of the cranioorbital and midface fractures and for
stabilization of osteotomies and bone
grafts used in reconstructive surgery.
Auxiliary Screw Module
Unique Features:
This customizable screw module is
a simple and convenient way to
store extra screws, drill bits and blades.
• Customizable screw markers
• SMARTLoad screw field for easy loading
Micro Mesh
Micro Mesh is an ultra-thin mesh used for
defect bridging of the skull/skull base and orbital
region, especially after tumor removal.
Unique Features:
Mesh Tray
• Screws may be inserted directly through the mesh
without the need for a dedicated screw hole
• Available in two ultra-thin sizes: .10mm (Blue)
and .20mm (Gold)
• If fixation with bone screws is not possible or preferred
suture material may be used
• A bi-directional measuring ruler is built into the tray
Applications:
For use with a screw range of 1.0mm to 1.9mm
54-00260 (120mm x 120mm)
54-00261 (120mm x 60mm)
54-00262 (60mm x 60mm)
54-00270 (120mm x 120mm)
54-00271 (120mm x 60mm)
54-00272 (60mm x 60mm)
•
•
•
•
Orbital floor
Lateral orbital wall
Sinus wall
Cranial defects
STORAGE OPTIONS
Inventory Management Cart
Unique Features:
This customizable cart is designed to help
centralize and organize the additional
support inventory to keep Stryker Leibinger
implant systems at the desired par levels.
•
•
•
•
•
Customizable drawer dividers
Drawer and shelving options
Vertical cart design
Storage racks
Mobile
Complementary Products
BoneSource® Classic
As a pure hydroxyapatite cement, BoneSource®
Classic is an osteoconductive, isothermic biomaterial
that is easily sculptable and remains stable over time.
Colorado Needle
The Colorado Microdissection Needle has a patented
ultra-sharp tip for clean, precise soft tissue dissection.
The heat resistant tungsten alloy maintains tip sharpness
and is highly polished for easy cleaning. We offer a
wide selection of needles for use in standard
handpieces (1/16”, 3/32”).
Medical Modeling
CT-Based Anatomical Bone Models facilitate
pre-surgical planning in complex clinical settings.
These accurate 3D models can reduce OR time
through enhanced preoperative planning.These
medical models allow the pre-bending of plates
and precise depth measurement for screws.
Procedural Guide
Applications
• Repair of craniotomy burr holes
• Repair of contiguous craniotomy cuts
• Repair of cranial defects
Applications
Step 1- Expose the
fracture.
• Precise cutting and coagulation
during electrosurgery
Step 2- Use benders to
contour Locking Plates.
Benders include plate
pockets with hole-pegs to
reduce hole deformation.
Step 3- Cut plate with right
handle (R) in area labeled
“CUT.” Slide the plate into
the cutting area. Cut will take
place within the window.
Step 4- Insert drill guide
into drill guide handle and
drill hole. *Drill guides must
be used when drilling holes
intended to be used with
locking screws.
Step 5- Only insert first
screw about 75% of the way,
then drill the hole for the
second screw and insert second screw 100% until locked
into the plate. Finish the first
screw then proceed accordingly with the other screws.
Step 6- Fracture fixation is
complete.
Step 5- Steps 3 and 4 are
skipped by using a self-drilling
tap. Set depth stop at
appropriate depth and use
self-drilling tap attached to
the tap handle. Make sure
that the hole-depth is equal
to (or longer) than the
length of screw to be used.
Step 6- Insert screws with
the torque-limiting feature in
the “ON” position on the
screwdriver handle.
Step 7- Fracture fixation is
complete.
Step 4- Insert the drill
guide through trocar and
drill hole.
Step 5- Measure desired
screw length using a
depth gauge.
Step 6- Insert screw
and repeat process for
each screw until fracture
fixation is complete.
Contour & Application: Resorbable Plates
Applications
Useful in the planning of:
• Distraction osteogenesis
• Orthognathic surgery
• Skull base tumor access
• Mandibular and cranial vault
reconstruction
IMF Screw System
Applications
The Intermaxillary Screw Fixation system offers
advantages over conventional arch bars for specific
jaw fracture needs.The IMF screw system reduces
operative time and risk of disease transmission,
requires minimal hardware and can easily be applied
in clinical settings.
• Immobilization of edentulous fractures
• Reduction and immobilization of
displaced and nondisplaced maxillary
and mandibular fractures
TOM Bone Mill
Applications
Tessier Osseous Microtome
Manually operated microtome that processes up to
40cc’s of bone at a time into bone chips. Three different
cutting cylinders are available depending on the size of
bone chips needed.
Contour & Application: Mid-Face Locking Plate
Step 1- Expose the fracture
and select the appropriate
template. Create the necessary contour on the template.
Step 2- Using the forceps,
hold appropriate plate to template and submerge in sterile
water bath. After 15 seconds,
remove and contour to the
template and let cool in room
temperature. For additional “in
situ” contouring, use contouring
pens.
Step 3- Drill holes.
Step 4- Tap the hole using
the bone tap. Be sure to set
appropriate depth on the
tap’s depth stop.
Contour & Application: Mandible Fracture Plate
•
•
•
•
•
Mandible reconstruction
Maxillary reconstruction
Sinus lift procedures
Dento-alveolar defect reconstruction
Frontal sinus obliteration
Step 1- Expose fracture(s).
Step 2- Use benders to
contour Fracture Plate.
Benders include plate
pockets to reduce hole
deformation.
Step 3- Cut Fracture
Plate with the right handle
(R) in the area labeled
"CUT.” Slide the plate
through the cutter from
left to right. Cut will take
Universal System Ordering Information
Procedural Guide
Contour & Application: Primary Reconstruction Plate
Step 1- Expose defect and
select appropriate template.
Recommended screw placement
for each segment includes:
Neutral Bone Screws
• 4ea- 2.0mm
• 4ea- 2.3mm
SMARTLock Screws
• 3ea- 2.0mm
• 3ea- 2.3mm
Step 2- Cut Primary
Reconstruction Plate with the
right handle (R) in the area
labeled "CUT.” Slide the
plate through the cutter from
left to right. Cut will take
Step 3- Contour Primary
Reconstruction Plate to
match template using
benders. Benders include
plate pockets to reduce hole
deformation.
Step 4- Insert drill guide
through trocar and drill
hole.
Step 5- Measure desired
screw length using a
depth gauge.
Step 6- Once plate is in
place, remove screws and
plate. After mandibular
resection, replace “prebent” plate and screws.
Recommend using
temporary recon
screw holder.
Contour & Application: Reconstruction Plate
Product # Description
Upper-Face
Mid-Face/1.7mm Orthognathic
Mid-Face/1.7mm Orthognathic
Upper-Face Fixation Plates, Standard Inlay
55-04424 24 Hole Straight Plate, malleable condensed
55-04218 18 Hole Straight Plate, malleable
55-04231 2x2 Hole 3-D Plate, malleable
55-04240 7 Hole Double Y Plate, malleable
55-04250 10 Hole Curved Plate, malleable
55-06224 24 Hole Straight Plate
55-06254 4 Hole Orbital Plate
55-06250 10 Hole Curved Plate
55-06260 8 Hole L Plate 90˚ Left
55-06261 8 Hole L Plate 90˚ Right
55-06270 7 Hole T Plate
55-06240 7 Hole Double Y Plate
55-06231 2x2 Hole 3-D Plate
Mid-Face Fixation Plates, Standard Inlay
55-04724 24 Hole Straight Plate, malleable condensed
55-04720 20 Hole Straight Plate, malleable
Standard L Plates
55-06760 5 Hole L Plate 2mm Adv. 100˚ Left, standard
55-06761 5 Hole L Plate 2mm Adv.100˚ Right, standard
55-06763 5 Hole L Plate 5mm Adv. 100˚ Right, standard
GSP L Plates
55-07760 5 Hole L Plate 2mm Adv. 100˚ Left, GSP
55-07761 5 Hole L Plate 2mm Adv. 100˚ Right, GSP
Malleable L Plates
55-04760 5 Hole L Plate 2mm Adv. 100˚ Left, malleable
55-04761 5 Hole L Plate 2mm Adv. 100˚ Right, malleable
55-04763 5 Hole L Plate 5mm Adv 100˚ Right, malleable
1.7mm Orthognathic Module, Prebent LeFort I Inlay
55-11700 11 Hole LeFort I Plate, 0mm Adv. Left
55-12700 11 Hole LeFort I Plate, 0mm Adv. Right
55-06704
55-06724
55-06750
55-06754
55-06771
55-05151
55-05164
1.7mm Cross-Pin Self-Tapping Screws
(5 screws per package)
51-17003 1.7x3mm Self-Tapping Screw
Upper-Face Fixation Plates, Bottom Module
55-06237 10x10 Hole 3-D plate
55-04237 10x10 Hole 3-D plate, malleable
54-03003 Orbital Floor Plate Isolated Small, 0.3mm
54-03002 Orbital Floor Plate Basic Middle, 0.3mm
54-04002 Orbital Floor Plate Basic Middle, 0.4mm
54-03000 Template Combined, Orbital Floor Plate, Small/Middle
54-03001 Orbital Floor Plate Complex Large, 0.3mm
54-04001 Orbital Floor Plate Complex Large, 0.4mm
54-04000 Template, Orbital Floor Plate, Large
55-06376 1.2 Malleable Burr Hole Cover Plate, 7mm
55-06375 1.2 Burr Hole Cover Plate, 7mm
1.2mm Cross-Pin Self-Tapping Screws
Step 1- Expose defect and
select appropriate template.
Recommended screw placement
for each segment:
Neutral Bone Screws
• 4ea- 2.3mm
SMARTLock Screws
• 3ea- 2.3mm
2.0mm screws are
recommended for bone graft
fixation only
Step 2a- To cut, lock plate in left
handle (L) labeled "CUT.” Place
cutting mechanism in right handle
(R) flush alongside the plate recess
in the left handle. Slide (R) handle
up until plate is seated within
locking mechanism.
Step 2b- Once plate is fully seated in the cutting mechanism, rotate
counterclockwise to shear plate.
Step 3a- Contour Reconstruction Plate to match
template using benders.
Benders include plate pockets
to reduce the amount of hole
deformation.
Step 3b- Roller benders
can be used for out-of-plane
bending.
Step 4- Insert drill
guide through trocar
and drill hole.
Step 5- Measure
desired screw length
using a depth gauge.
Step 6- Once plate is in
place, remove screws and
plate. After mandibular
resection, replace “prebent” plate and screws.
Recommend using
temporary recon
screw holder.
1.2mm Cross-Pin Self-Drilling Screws
51-12903 1.2x3mm Self-Drilling Screw
1.4mm Emergency Self-Tapping Screws
51-14003 1.4x3mm Emergency Screw
Indications For Use: Universal Mandible System
The Stryker® Leibinger Universal Mandibular System is a mandibular plate and screw system intended for
stabilization and rigid fixation of mandibular fractures and reconstruction.
Indications For Use: Locking Reconstruction Plate with attachable Temporary Condylar Head
The Locking Reconstruction Plate with attachable Temporary Condylar Head is intended for temporary
reconstruction in patients undergoing ablative tumor surgery requiring the removal of the mandibular condyle.
This device is not for permanent implantation, for patients with TMJ or traumatic injuries, or for treatment of
temporomandibular joint disease (TMD).
Mid-Face Fixation Plates, Bottom Module
55-05716 16 Hole Straight Plate, locking
55-05758 8 Hole Curved Plate, locking
55-05731 2x2 Hole 3-D Plate, locking
55-05733 6x2 Hole 3-D Plate, locking
55-05751 5 Hole Y Plate with 4mm Bar, locking
55-05752 5 Hole Y Plate with 8mm Bar, locking
55-05742 7 Hole Double Y Plate, locking
55-05761 5 Hole L Plate 2mm Adv., locking
55-05779 8 Hole Y Plate, locking
DynamicMesh
54-00340 1.0/1.2 DynamicMesh, Malleable, 40x40x.3mm
54-00642 1.0/1.2 DynamicMesh, Standard, 90x90x.6mm
54-00344 1.7 DynamicMesh, Malleable, 40x40x.3mm
54-00646 1.7 DynamicMesh, Standard, 90x90x.6mm
1.7mm Orthognathic System Inlay
Standard L Plates
GSP L Plates
55-07764 6 Hole L Plate 8mm Adv.100˚ Left, GSP
Malleable L Plates
55-04763 5 Hole L Plate 5mm Adv. 100˚Right, malleable
55-04765 6 Hole L Plate 8mm Adv.100˚ Right, malleable
Micro Mesh
54-00260 1.0-1.9 Micro Mesh, Malleable, 120x120x.1mm
54-00270 1.0-1.9 Micro Mesh, Standard, 120x120x.2mm
55-07781
55-07782
55-07783
55-07784
55-06724
55-05151
55-05152
Upper-Face Drill Bits (Single use only)
60-09504 0.9mm Twist Drill, 4mm WL, Stryker End
DynamicMesh/Micro Mesh
Indications For Use: Universal CMF System
The Stryker® Leibinger Universal CMF System is a Cranio-Maxillofacial (CMF) plate and screw system
intended for osteotomy, stabilization and rigid fixation of CMF fractures and reconstruction.
4 Hole Straight Plate with Bar
24 Hole Straight Plate
10 Hole Curved Plate
4 Hole Curved Plate with Bar
5 Hole T Plate
5 Hole Y Plate With 8mm Bar
7 Hole Double Y Plate
4 Hole Z Plate Small Left, GSP
4 Hole Z Plate Small Right, GSP
4 Hole Z Plate Large Left, GSP
4 Hole Z Plate Large Right, GSP
24 Hole Straight Plate
1.7mm Orthognathic, Bottom Module
55-10704 6 Hole Chin Plate 4mm, orthognathic
55-07734 2x34 Hole Double Strip Plate, malleable
55-06734 2x34 Hole Double Strip Plate, standard
55-05781 4 Hole Z Plate Small, locking Midface
55-05783 4 Hole Z Plate Large, locking Midface
55-05751 5 Hole Y Plate with 8mm Bar, locking Midface
55-05752 5 Hole Y Plate With 12mm Bar, locking Midface
55-05767 6 Hole L-Plate 12mm Adv., locking
1.7mm Cross-Pin Self-Drilling Screws
1.9mm Cross-Pin Emergency Screws
1.7mm Cross-Pin Locking Screws
51-17504 1.7x4mm Locking Screw
1.9mm Cross-Pin Locking Emergency Screws
51-19505 1.9x5mm Emergency Locking Screws
Drill Bits (Single use only)
60-13570 1.3 x 79mm Twist Drill, 6mm WL, Stryker End
60-19506 1.7mm Lag Twist Drill, 6mm WL, Stryker End
Universal System Ordering Information
2.0mm/2.3mm
Orthognathic/Mandible
2.0mm/2.3mm
Orthognathic/Mandible
2.0/2.3mm Orthognathic Module
55-10554 6 Hole Locking Sagittal Split Plate,
6mm Bar
55-10556 6 Hole Locking Sagittal Split Plate,
12mm Bar
55-10564 4 Hole Locking Straight Sagittal Split Plate,
6mm Bar
55-10566 6 Hole Locking Straight Sagittal Split Plate,
12mm Bar
2.0mm Cross-Pin Bone Screws
52-20404 2.0x4mm, Bone Screw, Cross-Pin
2.0/2.3mm Orthognathic Drill Bits (Single use only)
60-16035 Drill, WL 35mm, Stryker Shaft (1.6x115mm)
60-19035 Drill, WL 35mm, Stryker Shaft (1.9x115mm)
60-16820 1.6mm Twist Drill, 20mm WL, Sagittal Split,
Stryker End
60-19820 1.9mm Twist Drill, 20mm WL, Sagittal Split,
Stryker End
60-16908 1.6mm Twist Drill, 8mm WL, 90˚, Dental End
MANDIBLE FRACTURE SYSTEM IMPLANTS
Mini Plates (Order Qty: Pkg of 1)
55-10504 Mini Plate, 4 holes
55-10505 Mini Plate, 4 holes w. bar
55-10515 Locking 16 Hole Straight Plate, 5mm Hole Spacing
55-10507 6 Hole Straight Plate with Bar
55-10503 4 Hole Straight Plate Longer Bar
3D Plates (Order Qty: Pkg of 1)
55-10532 3D Plate, 3x2 Hole, Rectangle
55-10542 3D Plate, 4x2 Hole, Square
55-10562 3D Plate, 6x2 Hole, Curved, Square
Fracture Plates (Order Qty: Pkg of 1)
55-15504 Fracture Plate, 4 holes
55-15505 Fracture Plate, 4 holes w. bar
55-15507 Fracture Plate, 6 holes w. bar
55-15524 C-Shaped Fracture Plate, 4 holes
55-15526 Angle Fracture Plate, 6 holes, 115˚
55-15536 Angle Fracture Plate, 6 holes, 140˚
Compression Plates (Order Qty: Pkg of 1)
55-15570 2.0mm Compression Plate, 4 holes
Fracture Plate Templates
65-15504 Template for 55-15504
65-15505 Template for 55-15505
65-15506 Template for 55-15506
65-15507 Template for 55-15507
65-15514 Template for 55-15514
65-15524 Template for 55-15524
65-15526 Template for 55-15526
65-15536 Template for 55-15536
65-15570 Template for 55-15570
65-15580 Template for 55-15580
MANDIBLE RECONSTRUCTION SYSTEM IMPLANTS
Primary Reconstruction Plates (Order Qty: Pkg of 1)
55-15911 Primary Recon Plate, 11 holes, w. template
55-15917 Primary Recon Plate, 17 holes, w. template
55-15920 Primary Recon Plate (Hemi), 5+17,
Right w. template
55-15922 Primary Recon Plate (Hemi), 5+17,
Left w. template
Reconstruction Plates (Order Qty: Pkg of 1)
55-28911 Recon Plate, 11 holes, w. template
55-28917 Recon Plate, 17 holes, w. template
55-28920 Recon Plate (Hemi), 6+17, Right w. template
55-28922 Recon Plate (Hemi), 6+17, Left w. template
55-28930 Recon Plate (Full), 6+17+6, w. template
Temporary Condylar Prostheses (Order Qty: Pkg of 1)
56-25001 Temporary Condylar Prostheses, Left
56-25002 Temporary Condylar Prostheses, Right
Condyle Fastening Screws (2 screws per package)
56-25000 Condyle Fastening Screws
52-20504 2.0x4mm, Locking Screw, Cross-Pin
2.3mm Cross-Pin Bone Screws
2.7mm Emergency Cross-Pin Bone Screws
52-27408 2.7x8mm Bone Screw, Cross-Pin
2.7mm Emergency Cross-Pin Locking Screws
Universal Instrumentation
Universal Instrumentation
Upper-Face/Mid-Face Instrument Tray
29-13030 Upper-Face/Mid-Face Instrument Tray
01-08110 Universal Plate Forceps, Angled
62-12176 Upperface/Midface Plate Bender Left
62-12175 Upperface/Midface Plate Bender/Cutter Right
62-12173 Upperface/Midface 3-Prong Bender
62-18330 Upperface/Midface In-Situ Plate Cutter
62-20000 Universal Drill Guide Handle
62-17517 Drill Guide Insert for 1.7mm Locking Screws
62-12170 Upperface/Midface Screwdriver Blade (1.2/1.7)
62-20285 Universal Screwdriver Handle, Metal
62-32440 Universal Bone Repositioning Instrument
60-20012 Repositioning Pin Twist Drill
Implant Modules
29-12000 Upper-Face Module
29-12001 Upper Face Inlay I
29-13050 Universal Fracture Module
29-13060 Universal Recon Module
29-17000 Mid-Face Module
29-17001 Mid-Face Module Fracture Inlay
29-20230 Mandible Module
29-20231 Mandible Module Inlay
29-17200 Orthognathic Module
29-17201 Orthognathic Module Standard Inlay
29-17202 Orthognathic Module Prebent Inlay
29-12175 Auxillary Screw Module 1.2/1.7
Orthognathic Instrument Tray
29-13040 Orthognathic Instrument Tray
01-08110 Plate Holding Forceps, Angled
01-08730 Depth Measuring Gauge
62-12176 Upperface/Midface Plate Bender Left
62-12175 Upperface/Midface Plate Bender/
Cutter Right
62-20000 Universal Drill Guide Handle
62-17517 Drill Guide Insert for 1.7mm Locking
Screws
62-00303 Trocar
62-00302 Cheek Retractor Fixed
62-00309 Trocar Handle Orthognathic
62-12170 Upperface/Midface Screwdriver
Blade (1.2/1.7)
62-20285 Universal Screwdriver Handle, Metal
62-32440 Universal Bone Repositioning Instrument
60-20012 Repositioning Pin Twist Drill
Containers
29-13000 Universal Container Full Size
29-13001 Universal Container Half Size
29-13020 Universal Mandible Instrument/Fx Tray
29-13021 Universal Mandible Recon Tray
29-13022 Universal Accessory tray
29-13042 Drill Guide Instrument Rack
29-13052 Universal Mesh Tray
50-00301 Description Shield “1.2mm Upper-Face”
50-00302 Description Shield “1.2mm Upper-Face /
1.7mm Mid-face”
50-00303 Description Shield “1.7mm Mid-face”
50-00304 Description Shield “Orthognathic System”
52-00201 Description Shield “Mandible Fracture”
52-00202 Description Shield “Mandible Recon”
Mandible Instrumentation
64-00230 Recon Bender/Cutter, Left
64-00231 Recon Bender/Cutter, Right
64-00242 Bender/Cutter, Left
64-00243 Bender/Cutter, Right
64-00250 Roller Bender for Mandibular Plates
64-00175 Plate/Bone Forceps, Left
64-00176 Plate/Bone Forceps, Right
01-08110 Plate Holding Forceps, Angled
01-08630 Bone Reduction Forceps
01-14463 Bone Clamp Dingman
62-20290 Screwdriver Ratchet Handle
62-20295 Screwdriver Handle Revolving/Rigid
62-20130 Screwdriver Blade (2.0/2.3/2.7mm Emergency)
62-00301 Trocar Handle
62-00302 Cheek Retractor for 62-00301, Fixed
62-00303 Trocar
62-00201 Drill Guide, Centric, for 2.0mm Screws
62-00238 Drill Guide, Centric, for 2.3mm Screws
62-00202 Drill Guide, Eccentric, for 2.0mm Screws
62-00146 1.6mm Drill Guide, Lag, Pilot Drill
62-00148 2.0mm Drill Guide, Lag, Overdrill
62-20500 Tap for 2.0mm Mandibular Screws
62-20501 Tap for 2.0mm Mandibular Lag Screws
62-23150 Tap for 2.3mm Mandibular Screws
62-23501 Measuring Sleeve, 2.0/2.3mm Taps
60-94120 Countersink for Biconcave Washers, Hex
60-80142 Abrasive Burr, Stryker Shaft
60-80535 Temporary Recon Screw Holder
01-08730 Depth Measuring Gauge
56-00400 Biconcave Titanium Washers
Optional Instrumentation
62-20520 Drill Guide Insert for 2.0mm Screws Eccentric
62-20523 Drill Guide Insert for 2.3mm Screws Eccentric
62-20705 Lag Screw Depth Guide
62-92023 Right Angle Screwdriver Blade (2.0/2.3mm)
62-98730 Right Angle Depth Gauge
6514-7-100 Right Angle Luhr Fritzemeier Screwdriver
62-00308 Orthognathic Cheek Retractor Variable
62-18500 Universal Screw Guide
62-00192 Drill Guide eccentric, for 2.3mm screws
62-20284 1.2mm Screwdriver Handle, Upper Face
29-13043 Screwdriver Rack
Implant Markers (2 per package)
50-12000 1.2 Self Tapping Screw Marker
50-12900 1.2 Self Drilling Screw Marker
50-17000 1.7 Self Tapping Screw Marker
50-17900 1.7 Self Drilling Screw Marker
50-20000 2.0 Bone Screw Marker
50-20500 2.0 Locking Screw Marker
50-23000 2.3 Bone Screw Marker
50-23500 2.3 Locking Screw Marker
50-06700 “Standard”
50-04700 “Malleable”
50-07700 “G.S.P.”
52-00200 “2.0mm’’
52-00230 “2.3mm”
52-00270 “2.7mm”
52-00003 3mm Marker
52-00004 4mm Marker
52-00005 5mm Marker
52-00006 6mm Marker
52-00007 7mm Marker
52-00008 8mm Marker
52-00010 10mm Marker
52-00210 ‘’Bone Screws Marker’’
52-00215 ‘’Locking Screws Marker’’
Mandible Twist Drills (single use only)
60-16005 1.6mm Twist Drill, 5mm stop, Stryker
60-16007 1.6mm Twist Drill, 7mm stop, Stryker
60-16035 1.6mm Twist Drill, 35mm working length, Stryker
60-16050 1.6mm Pilot Drill, 50mm working length, Stryker
60-20050 2.0mm Overdrill, 50mm working length, Stryker
60-19035 1.9mm Twist Drill, 35mm working length, Stryker
60-16535 1.6mm Twist Drill 26mm WL, Stryker End
60-19535 1.9mm Twist Drill 26mm WL, Stryker End
60-16820 1.6mm Twist Drill, 20mm WL, Sagittal Split, Stryker End
60-19820 1.9mm Twist Drill, 20mm WL, Sagittal Split, Stryker End
60-16908 1.6mm Twist Drill, 8mm WL, 90 ˚, Dental End
Licensed by D. Wolter
STRYKER LEIBINGER and SMARTLOCK
are registered and/or unregistered
trademarks of STRYKER CORPORATION.
Stryker Leibinger Inc.
4100 East Milham Avenue
Kalamazoo, MI 49001 USA
Tel.:
(269) 324-5346
Toll Free: (800) 962-6558
Fax: (877) 648-7114
Stryker Leibinger GmbH & Co. KG.
Bötzinger Straße 41
D-79111 Freiburg
Germany
Tel.: (0761) 4512-0
Fax: (0761) 4512-120

upper-face module

Transcription

Similar documents

Universal Trauma brochure

Pick a Lathe - Your Tire Shop Supply

Orthopaedic Instruments

presentation