DATA BOOK - STROM PRAHA as

Transcription

DATA BOOK
OFF-THE-ROAD TIRES
GENERAL INFORMATION
RADIAL TIRE
BIAS TIRE
O-RING, FLAP, RIM, VALVE, CONVERSION TABLES
©2009 Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan
All rights reserved.
No part of this manual may be reproduced in any form by any electronic or mechanical means,
including information storage and retrieval devices or systems, without prior written permission
from Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan.
Notice: Although great care has been taken in producing this manual, we can accept no responsibility for any loss or
damage resulting from undetected errors or misprints which may have occurred.
Due to the constant advance of tire technology, the contents of this data book are subject to change without notice.
I
CONTENTS
INTRODUCTION
1. Industry Standard
INTRODUCTION
1. Industry Standard ................................................................................................. 1
2. Application Vehicle Matching Chart ................................................................... 1
GENERAL INFORMATION
1. Structural Diagram ............................................................................................... 2
2. Definitions ............................................................................................................. 3
3. Classification ........................................................................................................ 4
4. Tire Markings ........................................................................................................ 6
RADIAL TIRE
1. Tread Designs ..................................................................................................... 11
2. Application .......................................................................................................... 16
3. Technical Data .................................................................................................... 22
4. Remarks............................................................................................................... 52
Bridgestone Corporation has developed a wide range of tire patterns and specifications, so
that the proper Off-the-Road tire can be matched to any vehicle, service, or operating
conditions.
Bridgestone’s Off-the-Road tires are designed and produced to meet the commonly accepted
international standards, those set by the TRA (Tire and Rim Association) in the U.S.A., by the
ETRTO (European Tire and Rim Technical Organization) in Europe and/or by the JATMA (Japan
Automobile Tire Manufacturers’ Association) in Japan*.
Load capacities, inflation pressures, dimensions such as overall tire diameter and width, as
well as the relative rims and tube valves follow these standards.
If a tire is to be used for a purpose other than that for which it is originally intended, please
consult Bridgestone Corporation for advice.
*Where differences exist between the TRA, ETRTO and JATMA standards,
Bridgestone selects the most applicable.
2. Application Vehicle Matching Chart
APPLICATION
VEHICLE
Earthmover Service
Dump Trucks, Motor Scrapers, Articulated Dump Trucks,
Coal Haulers, Logging Trucks, Other Mining Trucks, etc.
Grader Service
Motor Graders
Loader & Dozer Service
Front-End Loaders, Back-hoe Loaders, Skid Steer Loaders,
Dozers, Shuttle Trucks, Load-Haul-Dumps, etc.
High-Speed Service
All-Terrain Cranes, High-Speed Vehicles,etc.
Industrial Service
Straddle Carriers, Aircraft Towing Tractors, Container Stackers,
Counter-balanced Lift Trucks, Mobile Crushers, Log Stackers, etc.
1. O-Ring Specifications ........................................................................................ 84
2. Flap Specifications ............................................................................................. 84
Logging Service
Log-Skidders
Compactor Service
Compactor, Road Rollers
3. Rim and Valve ..................................................................................................... 85
Sand Service
Sand Service Trucks
BIAS TIRE
1. Tread Designs ..................................................................................................... 54
2. Application .......................................................................................................... 56
3. Technical Data .................................................................................................... 62
4. Remarks............................................................................................................... 82
OTHER SPECIFICATION
OTHER INFORMATION
1. Unit Conversion Tables...................................................................................... 92
2. Specific Weight (Approximately)....................................................................... 95
II
INTRODUCTION 1
GENERAL INFORMATION
1. Structural Diagram
2. Definitions
Off-The-Road Radial Tire (ORR)
2.1 Tire Size
2.4 Overall Width (OW)
The size of each tire is indicated by nominal width and
rim diameter in inches and mm.
Radial structure is indicated by the letter “R”. For some
tire the aspect ratio is indicated by percentage.
“Overall Width” is the width of a new tire, including 24hour inflation growth, and including protective side ribs,
bars or decorations.
2.5 Section Width (SW)
Example
Radial Tire ; 40.00R57, 33.25R35, 445/95R25
Bias Tire ; 30.00-51, 45/65-45
Belt
Tread
Casing Ply
“Section Width” is the width of a new tire, including 24hour inflation growth and including normal sidewalls, but
not including protective side ribs, bars, or decorations.
2.2 Star Rating, Ply Rating and
Load Index
2.6 Static Loaded Radius and
Width (SLR, SLW)
The load capacity of a tire is indicated by the star
rating (in case of radial tire) and the ply rating (in case
of bias tire).
The load index is applied in countries where the
ETRTO standards are used.
“Static Loaded Radius” is the shortest distance from the
axle center to the contact surface of a tire and “Static
Loaded Width” is the overall width of a tire, mounted on
the approved rim at the specified inflation pressure and
placed still and vertically on a flat board, and loaded with
the specified load.
2.3 Overall Diameter (OD)
“Overall Diameter” is twice the section height of a new
tire, plus the nominal rim diameter, including 24-hour
inflation growth.
Chafer
2.7 Original Tread Depth (OTD)
“Original Tread Depth” is the tread depth of a new tire
measured at the point of tread-indicator where available
or one-fourth the width of the tire crown section from the
crown center, including 24-hour inflation growth.
Overall Width (OW)
Section Width (SW)
Off-The-Road Bias Tire (ORS)
Tread Width
Inner Liner
Bead Wire
Free
Radius
Section
Height
(SH)
Rim Flange Height
Breaker
Rim Width
Overall
Diameter
(OD)
Nominal Rim
Diameter
Dual
Spacing
Carcass
Chafer
Static Loaded
Radius
(SLR)
Static Loaded
Width
(SLW)
2
GENERAL INFORMATION 3
3.2 TRA Classification and Corresponding Bridgestone Off-The-Road
Tires
3. Classification
3.1 Uses and Characteristics of Off-The-Road Tires
The characteristics that Off-The-Road tires must possess differ according to their function and the type of vehicles
they are mounted on.
Off-The-Road tires are classified by the TRA as follows, and the names of the tread patterns of the corresponding
Bridgestone Off-The-Road tires are described below.
TRA Classification
Type/Service
Function
Main tire characteristics
required
Vehicles
Bridgestone Tread Pattern
Radial
Bias
Tread Type
E= Earthmover (Haulage Service)
E-2
Traction
E-3
Rock
E-4
Rock Deep
E-7
Flotation
G-1
G-2
G-3
G-4
Rib
Traction
Rock
Rock Deep
VUT VKT VSB
VFT VHS VSW
VLT VMT VTS
VEL VRL VRD VRF
L317 VLTS VSNT VMTS
VMTP VZTS VZTP VELSL
VELS VRLS VRDP VRPS
VRQP
VSJ
Dump trucks
Articulated dump trucks
Earthmover
Transporting
Coal haulers
Heat-resistance,
Cut-resistance,
Wear-resistance,
Shock burst-resistance
Scrapers
Trucks
Grader
Grading, Leveling
Graders
Loader and
dozer
Loading and
dozing
Loaders, Bulldozers
LHD
Compactor
Compacting
Traction,
Maneuverability,
(directional stability)
Cut-resistance,
Wear-resistance
Stability
Oil-resistance,
Cut-resistance,
Wear-resistance
Logging
Traction, Flotation,
Cut-resistance
Log-skidding
Log-skidders
High-speed
Heat-resistance,
Wear-resistance,
Traction
High-speed
Travelling
RLS ELS2
SCP2
G=Grader
RG
GL FG
RL
VUT VKT VSW
VMTS
L=Loader & Dozer (Slow Speed Service)
L-2
L-3
L-4
L-5
L-5S
Traction Regular
Rock Regular
Rock Deep
Rock Extra-Deep
Smooth Extra-Deep
C-1
C-2
Smooth
Grooved
LS-2
Intermediate
VUT VKT VSW
VLT VMT VJT VTS
VLTS VSNT VSNL
VSDT VSDL
VSMS
GL FG
RL VL2
RLS NL
DL
STMS
C=Compactor Service
RR
AL2
LS=Logging Service
TGS
High-Speed Service
High-Speed Service
Tire-rollers
WL RL VL2
VKT VGT VSB VHB VHS VSW
Industrial Service
VHB VEL VCH VCHD VCHS
VELS VRLS VSDL VSMS
Industrial Service
RL RLS ELS2 STMS YS2
Design Tread-Depth
150%
100%
250%
All-Terrain Cranes
Industrial
Uneven wear,
Wear-resistance,
Stability
Handling & Towing
Handling & Towing Equipment
4
Regular Tread
Deep Tread
Extra Deep Tread
E-2/E-3
L-2/L-3
G-2/G-3
E-4
L-4
G-4
L-5/L-5S
4. Tire Markings
(ORR)
4.2 Type of Tire Structures Classified by Service and Designated by
Bridgestone
1
Each Bridgestone tire has a Bridgestone code number on the tire sidewall according to its specifications.
1 Brand Name
OFF
2 Bridgestone’s Specifications Code
3 Pattern Name
THE
R OA D
OFF
THE
ROA D
GRADER
& DOZER
TYPE 2-A
TYPE 2-A
E S I S TA N T
CUT R
E S I S TA N T
CUT R
For
Earthmover service
For
Loader and Dozer service
THE
ROA D
5 Tire Size, Star Rating,Tubeless or Tube Type
IAL SERVICE
INDUSTR
For
Industrial service
OFF
THE
For
Grader service
ROA D
AND
CRANE USE
WHEEL
For
High-Speed Service
Tire Structures Classified by Type of Service and Bridgestone’s
Designations
4
Service
Service
BS
No.
BS Code
Code No.
Structure
Structure
Earthmover Service (E)
1A
2A
3A
Standard
Cut-resistant
Heat-resistant
Grader Service (G)
1A
2A
Standard
Cut-resistant
Loader & Dozer Service (D)
2A
2V★
2Z★
Cut-resistant
Special cut-resistant (Type“V”)
Special cut-resistant (Type“Z”)
Logging Service (S)
2V
3
4.1 Type of Tire Size Designation
Regular
OFF
L OA D E R
TYPE 2-A
OFF
2
R OA D
E S I S TA N T
CUT R
4 Serial Number
5
THE
E A R T H M OV I N G
Tire Aspect Ratio
27.00 R 49
Star Rating
Rim Diameter (inches)
Radial Structure
Section Width (inches)
★★
Standard
★
Wide Base
SH = 0.95
SW
33.25 R 35
NOTES: Bias Tire Only
★★
2V tires are standard for log skidder service since the possibility of the cutting is high in log skidder operations.
Steel Breaker Tire
Star Rating
Radial Structure
SH = 0.80
SW
Super Wide Base 40 / 65 - 39 30PR
Ply Rating
Characteristics:
Aspect Ratio 65 Series
Radial Structure
Aspect Ratio 95 Series
Section Width (mm)
Speed Symbol
Load Index
6
SH = 0.65
SW
SH, SW : See Page 3
170 E 385 / 95 R 24
A: Standard
V: Cut-resistant type “V”
Structure:
(Steel Breaker)
Z: Cut-resistant type “Z”
(Side Steel Breaker)
Type of Service:
Type V
Type Z
Steel breaker
construction
Side steel breaker
construction
1: Standard
2: Cut-resistant
3: Heat-resistant
E: Earthmover
G: Grader
D: Loader & Dozer
S: Logging
Steel Breaker Bias Tire
Steel Breaker Off-the-Road tires feature breaker material which is
changed from nylon to steel in order to resist cutting and cut bursting.
Bridgestone Steel Breaker Off-the-Road tires are widely used on loaders
at mining and quarry sites, loaders and shuttle trucks in underground
mines, and also on log loaders.
Side Steel Breaker Bias Tire
In this tire the steel breaker extends to the sidewall of the tire to protect
it against damage. The construction is similar to that described above.
4.3 Load Index
4.4 Speed Symbol
The LOAD INDEX is an international numerical code for the maximum load a tire can carry at the speed indicated by
its speed symbol under service conditions specified by Bridgestone.
The SPEED SYMBOL indicates the speed at which the tire can carry a load corresponding to its load index under
service conditions specified by Bridgestone.
LI
kg
LI
kg
LI
kg
LI
kg
LI
kg
LI
0
1
2
3
4
5
6
7
8
9
45
46.2
47.5
48.7
50
51.5
53
54.5
56
58
50
51
52
53
54
55
56
57
58
59
190
195
200
206
212
218
224
230
236
243
100
101
102
103
104
105
106
107
108
109
800
825
850
875
900
925
950
975
1 000
1 030
150
151
152
153
154
155
156
157
158
159
3 350
3 450
3 550
3 650
3 750
3 875
4 000
4 125
4 250
4 375
200
201
202
203
204
205
206
207
208
209
14 000
14 500
15 000
15 500
16 000
16 500
17 000
17 500
18 000
18 500
250
251
252
253
254
255
256
257
258
259
60 000
61 500
63 000
65 000
67 000
69 000
71 000
73 000
75 000
77 500
10
11
12
13
14
15
16
17
18
19
60
61.5
63
65
67
69
71
73
75
77.5
60
61
62
63
64
65
66
67
68
69
250
257
265
272
280
290
300
307
315
325
110
111
112
113
114
115
116
117
118
119
1 060
1 090
1 120
1 150
1 180
1 215
1 250
1 285
1 320
1 360
160
161
162
163
164
165
166
167
168
169
4 500
4 625
4 750
4 875
5 000
5 150
5 300
5 450
5 600
5 800
210
211
212
213
214
215
216
217
218
219
19 000
19 500
20 000
20 600
21 200
21 800
22 400
23 000
23 600
24 300
260
261
262
263
264
265
266
267
268
269
80 000
82 500
85 000
87 500
90 000
92 500
95 000
97 500
100 000
103 000
20
21
22
23
24
25
26
27
28
29
8
80
82.5
85
87.5
90
92.5
95
97
100
103
70
71
72
73
74
75
76
77
78
79
335
345
355
365
375
387
400
412
425
437
120
121
122
123
124
125
126
127
128
129
1 400
1 450
1 500
1 550
1 600
1 650
1 700
1 750
1 800
1 850
170
171
172
173
174
175
176
177
178
179
6 000
6 150
6 300
6 500
6 700
6 900
7 100
7 300
7 500
7 750
220
221
222
223
224
225
226
227
228
229
25 000
25 750
26 500
27 250
28 000
29 000
30 000
30 750
31 500
32 500
30
31
32
33
34
35
36
37
38
39
106
109
112
115
118
121
125
128
132
136
80
81
82
83
84
85
86
87
88
89
450
462
475
487
500
515
530
545
560
580
130
131
132
133
134
135
136
137
138
139
1 900
1 950
2 000
2 060
2 120
2 180
2 240
2 300
2 360
2 430
180
181
182
183
184
185
186
187
188
189
8 000
8 250
8 500
8 750
9 000
9 250
9 500
9 750
10 000
10 300
230
231
232
233
234
235
236
237
238
239
33 500
34 500
35 500
36 500
37 500
38 750
40 000
41 250
42 500
43 750
40
41
42
43
44
45
46
47
48
49
140
145
150
155
160
165
170
175
180
185
90
91
92
93
94
95
96
97
98
99
600
615
630
650
670
690
710
730
750
775
140
141
142
143
144
145
146
147
148
149
2 500
2 575
2 650
2 725
2 800
2 900
3 000
3 075
3 150
3 250
190
191
192
193
194
195
196
197
198
199
10 600
10 900
11 200
11 500
11 800
12 150
12 500
12 850
13 200
13 600
240
241
242
243
244
245
246
247
248
249
45 000
46 250
47 500
48 750
50 000
51 500
53 000
54 500
56 000
58 000
270
271
272
273
274
275
276
277
278
279
kg
106 000
109 000
112 000
115 000
118 000
121 000
125 000
128 000
132 500
136 000
Speed Symbol
Speed (km/h)
Speed Symbol
Speed (km/h)
A1
A2
A3
A4
A5
A6
A7
A8
5
10
15
20
25
30
35
40
B
C
D
E
F
G
50
60
65
70
80
90
4.5 Conversion Table: Star Rating to Ply Rating
Service
Tire Size
Earthmover
12.00R24
14.00R24
14.00R25
16.00R25
18.00R25
Star
Rating
★★★
★★★
★★★
★★
★
★★
18.00R33
21.00R33
21.00R35
24.00R35
24.00R49
27.00R49
30.00R51
33.00R51
36.00R51
40.00R57
17.5R25
20.5R25
★★
★★
★★
★★
★★
★★
★★
★★
★★
★★
★
★
★★
25/65R25
23.5R25
★★
★
★★
26.5R25
29.5R25
29.5R29
33.25R29
33.25R35
37.25R35
37.5R39
40.5/75R39
★★
★★
★★
★★
★★
★★
★★
★★
Corresponding
Ply Rating
up to 24
up to 32
up to 32
up to 36
up to 24
up to 36
up to 40
up to 36
up to 44
up to 48
up to 48
up to 54
up to 58
up to 64
up to 66
up to 74
up to 16
up to 24
up to 28
up to 32
up to 24
up to 32
up to 32
up to 34
up to 40
up to 44
up to 44
up to 48
up to 52
up to 54
Service
Tire Size
Grader
14.00R24
16.00R24
17.5R25
15.5R25
17.5R25
20.5R25
Loader
Star
Rating
★
★
★
★
★
★
★★
23.5R25
★
★★
26.5R25
★
★★
29.5R25
★
★★
29.5R29
35/65R33
45/65R45
★
★
★
Corresponding
Ply Rating
up to 16
up to 16
up to 16
up to 16
up to 16
up to 24
up to 28
up to 24
up to 32
up to 24
up to 36
up to 28
up to 34
up to 34
up to 36
up to 50
Note: Due to the practice of altering inflation pressure to improve flotation on sand, Bridgestone does not apply a star
rating to tire size 21.00R25 VSJ.
RADIAL TIRE
1. Tread Designs
■Earthmover Service
4.6 Size Conversion Table
Metric
Inch
385/95R24, 25
445/95R24, 25
445/80R25
505/95R25
525/80R25
750/65R25
14.00R24, 25
16.00R24, 25
17.5R25
18.00R25
20.5R25
30/65R25
E2
4.7 Dual Specification Codes
Some Bridgestone Off-The-Road Tires have dual specification codes which can be used for both services.
Combination
Construction
V-STEEL
ULTRA TRACTION
(VUT)
26.5R25 MS* VLT T DE2
E2
*1 D2A
*2 E2A
26.5 – 25 20 VL2 T DE2
Bias
D2A
E2A
17.5 – 25 12 FG T DG2
+
Grader Service
Bias
D2A
G2A
17.5R25
Earthmover Service
+
Grader Service
✽ Multiple
✽1
VKT T EG2
Radial
E2A
G2A
Star Rating
Bridgestone Radial Tires marked with “LOADER & DOZER ★(one star)” and “EARTHMOVER ★★(two star)”
have specified load capacity on each servicing condition.
V-STEEL
F-TRACTION
(VFT)
Strength of tire casing is designed to constrain inflation pressure used.
<26.5R25 as an example>
Type of Service
V-STEEL
S-BLOCK
(VSB)
Size Designation
Radial
+
Earthmover Service
V-STEEL
K-TRACTION
(VKT)
Star Rating
Loader
★(one
Earthmover
★★(two
star)
stars)
Inflation
Pressure
Load
(Load Index)
Speed
(Speed Symbol)
5.00 bar
15,000 kgs
(202)
11,500 kgs
(190)
10 km/hour
(A2)
50 km/hour
(B)
5.25 bar
V-STEEL
H-SERVICE
(VHS)
V-STEEL
SNOW WEDGE
(VSW)
E3
Description on Tire Sidewall
V-STEEL
L-TRACTION
(VLT)
10
Wide Base
Regular
V-STEEL M-TRACTION
(VMT)
V-STEEL
TRACTION-STABILITY
(VTS)
RADIAL TIRE 11
E4
E3
V-STEEL
E-LUG
(VEL)
Wide Base
Regular
V-STEEL R-LUG
(VRL)
V-STEEL
ROCK DEEP
(VRD)
V-STEEL
ROCK FAST
(VRF)
14.00R24~16.00R25
21.00R33~37.00R57
53/80R63
V-STEEL R-LUG S (VRLS)
■Sand Service
E4
L317
V-STEEL
L-TRACTION S
(VLTS)
V-STEEL
N-TRACTION
(VSNT)
E4
V-STEEL
M-TRACTION S
(VMTS)
V-STEEL
M-TRACTION
PREMIUM (VMTP)
V-STEEL
ROCK DEEP
PREMIUM (VRDP)
V-STEEL
ROCK PREMIUM
SERVICE (VRPS)
E7
V-STEEL
ROCK QUARRY
PREMIUM (VRQP)
V-STEEL
JAMAL
(VSJ)
■Grader Service
E4
V-STEEL
Z-TRACTION S
(VZTS)
12
V-STEEL
Z-TRACTION
PREMIUM (VZTP)
37.00R57
40.00R57
VELSL
G2
18.00R25~ 40.00R57
21.00R35 50/90R57
31/90R49
46/90R57
V-STEEL E-LUG S (VELS)
V-STEEL
U-TRACTION
(VUT)
V-STEEL
K-TRACTION
(VKT)
G4
V-STEEL
SNOW WEDGE
(VSW)
V-STEEL
M-TRACTION S
(VMTS)
RADIAL TIRE 13
■Loader & Dozer Service
■Industrial Service
L2
V-STEEL
U-TRACTION
(VUT)
L3
V-STEEL
K-TRACTION
(VKT)
V-STEEL
SNOW WEDGE
(VSW)
V-STEEL
L-TRACTION
(VLT)
L3
V-STEEL
J-TRACTION
(VJT)
V-STEEL
M-TRACTION
(VMT)
V-STEEL
L-TRACTION S
(VLTS)
V-STEEL
N-TRACTION
(VSNT)
V-STEEL
N-LUG
(VSNL)
■High-Speed Service
V-STEEL
V-STEEL
SUPER-DEEP
D-LUG
TRACTION (VSDT) (VSDL)
14
V-STEEL
HIGHWAY SERVICE
(VHS)
V-STEEL
SNOW WEDGE
(VSW)
V-STEEL
H-BLOCK
(VHB)
V-STEEL
E-LUG
(VEL)
L4
V-STEEL
TRACTION-STABILITY
(VTS)
L5
V-STEEL
H-BLOCK
(VHB)
V-STEEL
CONTAINER
HANDLER
(VCH)
V-STEEL
CONTAINER
HANDLER DEEP
(VCHD)
V-STEEL
CONTAINER HANDLER
STABILITY AND SAFETY
(VCHS)
L5S
V-STEEL SMOOTH
TREAD-MS
(VSMS)
V-STEEL
K-TRACTION
(VKT)
V-STEEL
G-TRACTION
(VGT)
V-STEEL
S-BLOCK
(VSB)
V-STEEL
E-LUG S
(VELS)
V-STEEL
R-LUG S
(VRLS)
V-STEEL
D-LUG
(VSDL)
V-STEEL
SMOOTH TREAD-MS
(VSMS)
RADIAL TIRE 15
2. Application
■Earthmover Service
HEAT RESISTANT
CUT RESISTANT
VLT
VKT
VSNT
VMT
L317
VMTS
VSB
VZTS
VRL
VZTP
VRLS
VRD
VRQP
VEL VELSL
VHS
VELS
VRDP
VRF
Size
Type Star Rating
335/80 R 20
365/80 R 20
405/70 R 20
T/L
T/L
T/L
30.00 R 51
36.00 R 51
T/T
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
★3
★1
★2
★2
★2
★2
★2
★2
★2
★2
VSB(E2)
14.00 R 24
14.00 R 25
T/T
T/L
★3
★3
20.5 R 25
23.5 R 25
T/L
T/L
T/L
T/T: Tube Type T/L: Tubeless Type
★2
★2
T/L
T/L
MS
MS
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
MS
MS
MS
MS
MS
★2
★2
★2
875/65 R 29
★2
★2
★2
18.00 R 25
18.00 R 33
21.00 R 35
24.00 R 35
Type Star Rating
29.5 R 35
33.25 R 35
37.25 R 35
40.5/75 R 39
27.00 R 49
T/L
T/L
T/L
T/L
T/L
★2
★2
★2
★2
T/L
T/L
T/L
T/L
T/L
★2
★2
★2
★2
★2
VRD(E3)
59/80 R 63
T/L
★2
T/L
T/L
★2
★2
MS
L317(E4)
17.5 R 25
23.5 R 25
29.5 R 25
30.00 R 51
33.00 R 51
40.00 R 57
❋ VSW is especially designed for snow surface operations.
T/L
T/L
T/L
T/L
T/L
T/L
★2
★2
★2
★2
★2
★2
Type Star Rating
20.5 R 25
23.5 R 25
750/65(30/65) R 25
26.5 R 25
29.5 R 25
T/L
T/L
T/L
T/L
T/L
MS
MS
★2
★2
★2
VSNT(E4)
26.5 R 25
29.5 R 25
29.5 R 29
35/65 R 33
T/T
T/T
T/L
T/T
★3
★3
★3
★3
14.00 R 24
14.00 R 25
16.00 R 25
18.00 R 25
18.00 R 33
21.00 R 35
24.00 R 35
27.00 R 49
T/L
T/L
T/L
T/L
MS
MS
MS
MS
T/T
T/L
T/L
T/L
T/L
T/L
T/L
T/L
★3
★3
★2
★2
★2
★2
★2
★2
T/T
T/L
T/L
T/L
T/L
★3
★2
★2
★2
★2
VMTP(E4)
12.00 R 24
18.00 R 33
21.00 R 33
21.00 R 35
24.00 R 35
Size
Type Star Rating
T/T: Tube Type T/L: Tubeless Type
MS: Multiple Star Rating
24.00 R 49
27.00 R 49
33.00 R 51
Size
T/L
T/L
T/L
★2
★2
★2
T/L
T/L
★2
★2
T/L
★2
24.00 R 35
24.00 R 49
27.00 R 49
30.00 R 51
33.00 R 51
36.00 R 51
37.00 R 57
53/80 R 63
VZTS(E4)
37.00 R 57
40.00 R 57
VZTP(E4)
46/90 R 57
T/L
T/L
★2
★2
27.00 R 49
33.00 R 51
42/90 R 57
40.00 R 57
46/90 R 57
53/80 R 63
59/80 R 63
T/L
T/L
T/L
T/L
T/L
T/L
T/L
★2
★2
★2
★2
★2
★2
★2
T/T
T/L
T/L
T/L
T/T
★3
★3
★2
★2
★2
VELS(E4)
18.00 R 25
18.00 R 33
21.00 R 35
31/90 R 49
40.00 R 57
46/90 R 57
50/90 R 57
VRLS(E4)
14.00 R 24
14.00 R 25
16.00 R 25
21.00 R 33
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
★2
★2
★2
★2
★2
★2
★2
★2
T/L
T/L
T/L
T/L
T/L
T/L
T/L
★2
★2
★2
★2
★2
★2
★2
T/L
T/L
T/L
T/L
T/L
★2
★2
★2
★2
★2
T/L
T/L
★2
★2
VRDP(E4)
VELSL(E4)
37.00 R 57
40.00 R 57
Type Star Rating
VRLS(E4) (continued)
VMTP(E4) (continued)
VMTS(E4)
VRF(E3)
11.00 R 20
12.00 R 20
12 R 22.5
12.00 R 24
Size
VLTS(E4)
VRL(E3)
53/80 R 63
59/80 R 63
VTS(E3)
16
T/L
T/L
VLT(E3)
20.5 R 25
23.5 R 25
750/65(30/65) R 25
26.5 R 25
29.5 R 25
33.25 R 29
37.25 R 35
40.5/75 R 39
Size
VEL(E3)
VMT(E3)
VFT(E2)
18.00 R 33
24.00 R 49
27.00 R 49
Type Star Rating
❋ VSW(E2)
VKT(E2)
14.00 R 24
17.5 R 25
18.00 R 25
20.5 R 25
23.5 R 25
25/65 R 25
26.5 R 25
29.5 R 25
29.5 R 29
37.5 R 39
Size
VRPS
VHS(E2)
VUT(E2)
ROCK
VFT
TRACTION
VMTP VLTS
VSW
VRPS(E4)
NEW
NEW
40.00 R 57
46/90 R 57
50/90 R 57
53/80 R 63
59/80 R 63
VRQP(E4)
18.00 R 33
24.00 R 35
RADIAL TIRE 17
■ Grader Service
■ Loader & Dozer Service
HEAT RESISTANT
VUT
VSW
VKT
VUT
CUT RESISTANT
VLT
VLTS
TRACTION
CUT RESISTANT
TRACTION
HEAT RESISTANT
VSW
VKT
VSDT
VJT VMT
ROCK
VTS
ROCK
VMTS
VSNT
VSNL
Size
Type Star Rating
VUT(G2)
13.00 R 24 TG
14.00 R 24 TG
15.5 R 25
17.5 R 25
20.5 R 25
23.5 R 25
T/L
T/L
T/L
★1
★1
★1
T/L ★1★3
T/L
★1
T/L
★1
VMTS(G4)
14.00 R 24 TG
335/80 R
365/80 R
405/70 R
15.5 R
17.5 R
20.5 R
23.5 R
Size
T/L
★1
14.00 R
15.5 R
17.5 R
20.5 R
23.5 R
26.5 R
T/L
T/L
T/L
T/L
T/L
T/L
T/L
★1★2
★1
★1
★1
24 TG
25
25
25
25
25
T/L
T/L
T/L
T/L
T/L
T/L
★1
★1
★1
★1
★1
★1★2
24 TG
25
25
25
T/L
T/L
T/L
T/L
★1
★1
MS
MS
❋ VSW(L2)
14.00 R
17.5 R
20.5 R
23.5 R
T/T: Tube Type
T/L: Tubeless Type
TG: For Semi-Drop Center Rim
20.5 R
23.5 R
750/65(30/65) R
26.5 R
29.5 R
25
25
25
25
25
T/L
T/L
T/L
T/L
T/L
T/T: Tube Type
T/L: Tubeless Type
MS
MS
MS
MS
MS
25
25
25
25
25
T/L
T/L
T/L
T/L
T/L
★1★2
★1
★1★2
★1★2
★1
Size
23.5 R
26.5 R
29.5 R
29.5 R
35/65 R
VJT(L3)
Type Star Rating
25
25
25
29
33
T/L
T/L
T/L
T/L
T/L
★1★2
★1★2
★1★2
★1★2
★1
15
15
15
20
25
25
25
25
25
25
29
33
39
45
51
57
57
T/T
T/T
T/L
T/T
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
★2
★2
★2
★2
★1
★1★2
★1★2
★1★2
★1★2
★1★2
★1★2
★1★2
★1
★1★2
★2
20
20
24
24
25
25
25
29
T/T
T/T
T/T
T/T
T/L
T/L
T/L
T/L
★2
★2
★2
★2
★1★2
★1★2
★1★2
★2
VSDL(L5)
T/L
T/L
T/L
★1
★1
MS
25
25
25
29
29
T/L
T/L
T/L
T/L
T/L
★1
★1
★1
★1
★1
20.5 R 25
23.5 R 25
T/L
T/L
MS
MS
20.5 R 25
23.5 R 25
26.5 R 25
8.25 R
10.00 R
14.5 R
12.00 R
15.5 R
17.5 R
20.5 R
23.5 R
26.5 R
29.5 R
29.5 R
35/65 R
45/65 R
45/65 R
50/65 R
55.5/80 R
60/80 R
NEW
VTS(L3)
550/65 R
650/65 R
750/65 R
775/65 R
875/65 R
VLTS(L4)
26.5 R
29.5 R
29.5 R
35/65 R
25
25
29
33
T/L
T/L
T/L
T/L
14.00 R 20
35/65 R 33
45/65 R 45
T/T
T/L
T/L
MS
MS
MS
MS
★2
★2
★2
★2
VSNL(L4)
18
VSMS
VSDT(L5)
17.5 R
20.5 R
23.5 R
26.5 R
29.5 R
VSNT(L4)
VLT(L3)
Type Star Rating
VMT(L3)
20
20
20
25
25
25
25
VKT(L2)
❋ VSW(G2)
14.00 R 24 TG
16.00 R 24 TG
17.5 R 25
Type Star Rating
VUT(L2)
T/L
★1
T/L
★1
T/L ★1★2
T/L
★1
T/L
★1
T/L
★1
VKT(G2)
14.00 R 24 TG
16.00 R 24 TG
17.5 R 25
Size
VSDL
★2
★2
★2
NEW
VSMS(L5S)
9.00 R
12.00 R
12.00 R
14.00 R
17.5 R
18.00 R
26.5 R
29.5 R
RADIAL TIRE 19
■ High-Speed Service
■ Industrial Service
ON ROAD
OFF ROAD
VHB
VKT
TRACTION
VGT
VSB
VCHS
14.00 R 24
16.00 R 25
18.00 R 25
T/T
T/L
T/L
★3
★2
★3
18.00 R 25
T/L
★3
NEW
T/T
T/T
T/L
T/L
T/L
★3
★3
★3
★3
★3
18.00 R 33
T/L
★3
16.00 R 25
T/L
★2
23.5 R 25
35/65 R 33
T/L
T/L
★2
★2
18.00 R 25
T/L
★2
12.00 R
14.00 R
14.00 R
18.00 R
18.00 R
20
24
24 TG
25
33
VEL
VEL
VELS
VHB
VSW
Size
Type Star Rating
VKT
177E 445/95 R 25
(16.00R25)
VHS
Size
T/L
170E 385/95 R 24
(14.00R24)
★2
T/L
★1
T/L
★2
T/T
T/L
★3
177E 445/95 R 25
(16.00R25)
T/L
★2
177E 445/95 R 25
(16.00R25)
T/L
★2
186E 505/95 R 25
(18.00R25)
T/L
★2
T/T
★3
T/T
170E 385/95 R 25
(14.00R25)
T/L
T/L
170E 385/95 R 25
(14.00R25)
★3
170F 385/95 R 25
(14.00R25)
T/L
★3
177E 445/95 R 25
(16.00R25)
T/L
★2
174F 445/95 R 25
(16.00R25)
T/L
★2
186E 505/95 R 25
(18.00R25)
T/L
★2
179E 525/80 R 25
(20.5R25)
T/L
★2
T/T: Tube Type
T/L: Tubeless Type
20
12.00 R 20
12.00 R 24
14.00 R 24
T/T
T/T
T/T
★3
★2
★3
16.00 R 25
T/L
★2
VCHD
170E 385/95 R 24
(14.00R24)
NEW
VCH
★3
170E 385/95 R 24
(14.00R24)
NEW
Type Star Rating
170E 385/95 R 25
(14.00R25)
VHS
VSB
Size
❋ VSW
VHB
VGT
24 R 21
170E 445/80 R 25
(17.5R25)
Type Star Rating
VRLS
VSDL
VSMS
■ Sand Service
VSJ(E7)
16.00 R 20
21.00 R 25
T/T: Tube Type
T/L: Tubeless Type
T/T
T/L
28
RADIAL TIRE 21
3. Technical Data
LI/SS
Star
Rating
TRA Code
or
Application
Spec
★2
L5
D2A
TKPH TMPH
Approximate Inflated Dimensions
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Recommended
Minimum
Dual Spacing Rim/Flange Height
mm
inch
inch
Pattern
Tire Load Limits at Various Cold Inflation Pressures
285
11.2
48.0
-
VSDL
★2
L5
D2A
-
-
905
35.6
287
11.3
416
16.4
330
13.0
48.0
-
7.50V
VSDL
14.5R15
Tubeless
VSDL
★2
L5
D2A
-
-
899
35.4
359
14.1
413
16.3
412
16.2
48.0
-
11.00/1.5
VSDL
20"
9.00R20
VSMS
★2
L5S
D2A
-
-
1054
41.5
260
10.2
474
18.7
303
11.9
51.0
-
7.00T
20"
VSMS
11.00R20
L317
★3
E4
-
188
129
1107
43.6
290
11.4
512
20.2
325
12.8
25.0
335
13.2
8.00V
L317
1146
45.1
308
12.1
523
20.6
346
13.6
25.0
384
15.1
8.50V
★3
L317
E4
-
208
142
VSDL
★2
L5
D2A
-
-
1168
46.0
320
12.6
538
21.2
359
14.1
57.0
-
VSMS
★2
L5S
D2A
-
-
1173
46.2
312
12.3
540
21.3
351
13.8
57.0
-
VCH
★3
Industrial
Service
IDU
-
-
★3
IDU
-
-
D2A
-
-
-
-
-
kPa
psi
400
58
Loader
10
5
★
kg
lbs
★
kg
lbs
★
kg
lbs
★2
2200 2275 2350 2425 2500 2575 2650 2725 2800 2875 2950 3025 3100
4860 5020 5200 5360 5540 5700 5860 6000 6200 6350 6500 6650 6800
★2
2875 2975 3075 3175 3275 3375 3475 3575 3650 3750 3850 3950 4025
6350 6550 6800 7000 7200 7450 7650 7850 8050 8250 8500 8700 8900
★2
2425 2550 2650 2775 2875 2975 3100 3200 3300 3400 3500
5360 5620 5860 6100 6350 6600 6800 7050 7250 7500 7700
Loader
10
5
E/M
E4
50
30
E4
★
kg
lbs
★
kg
lbs
★
kg
lbs
★
kg
lbs
★2
3075 3250 3350 3450 3550 3650 3750 3875 4000 4000 4125 4250 4375
6800 7150 7400 7600 7850 8050 8250 8550 8800 8800 9100 9350 9650
★3
2810 2910 3010 3100 3200 3300 3390 3480 3570 3670 3760
6200 6420 6640 6830 7050 7280 7470 7670 7880 8080 8290
★3
3110 3220 3330 3430 3540 3650 3750 3850 3950 4060 4160
6860 7100 7340 7560 7800 8050 8270 8490 8720 8940 9170
★2
4375 4500 4625 4875 5000 5150 5300 5450 5600 5800 5800 6000 6150
9650 9900 10200 10700 11000 11400 11700 12000 12300 12800 12800 13200 13600
6.50T
L317
VSDL
VSMS
Loader
10
5
VCH
VCHS
IDU
425
62
450
65
475
69
500
73
2500 2600 2710
5510 5730 5970
2770 2880 2990
6110 6350 6590
525
76
550
80
See characteristics page 46
VCHS
176A5
14.00R20
VSNL
★2
Industrial
Service
L4
16.00R20
VSJ
28
E7
1196
47.1
360
14.2
550
21.7
414
16.3
10.00WI
VSNL
VSJ
Loader
10
5
Sand
★
kg
lbs
DE2
-
-
1036
40.8
319
12.6
463
18.2
357
14.1
kPa
psi
11x20
VUT
365/80R20
Tubeless
VUT
405/70R20
Tubeless
VUT
21"
24R21
Tubeless
22.5"
12R22.5
Tubeless
141B
153A2
E2
L2
DE2
143B
155A2
E2
L2
DE2
-
-
-
-
VGT
★1
High-Speed
Service
-
520
356
L317
★3
E4
-
188
129
1087
42.8
347
13.7
483
19.0
389
15.3
21.0
1092
43.0
398
15.7
485
19.1
446
17.6
20.0
-
11x20
-
13x20
VUT
VUT
21"
VGT
725
105
750
109
775
112
800
115
825
120
Loader
L2
10
5
L2
L2
★
kg
lbs
★
kg
lbs
★
kg
lbs
275
40
300
44
325
47
350
51
375
54
2430 2575 2725 2900 3075
5350 5700 6000 6400 6800
2900 3075 3250 3450 3650
6400 6800 7150 7600 8000
3075 3250 3450 3650 3875
6800 7250 7600 8100 8550
HighSpeed
22.5"
1109
43.7
292
11.5
517
20.4
327
12.9
25.0
343
13.5
9.00
L317
22
700
102
-
19.0
675
98
335/80R20
E2
L2
650
94
405/70R20 365/80R20
136B
147A2
625
91
★2
5200 5400 5550 5750 5900 6100 6250 6450 6600 6800 6950 7100 7300
11400 11900 12300 12600 13000 13400 13800 14200 14600 15000 15300 15700 16100
VUT
600
87
-
34.0
575
83
8.25R15
405
15.9
14.5R15 10.00R15
248
9.8
11.00R20 9.00R20
880
34.6
12.00R20
-
16.00R20 14.00R20
-
10.00R15
335/80R20
Tubeless
Size
15"
VSDL
VSDL
12.00R20
Application
Max.Speed
km/h
mph
24R21
15"
8.25R15
Pattern
E/M
50
30
kPa
psi
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
815
118
★
kg
lbs
★3
2410 2510 2610 2700 2800 2890 2990 3080 3170 3260 3350 3440 3530 3620 3690 3760
5310 5530 5750 5950 6170 6370 6590 6790 6990 7190 7390 7580 7780 7980 8140 8290
12R22.5
Tire Size
For the TKPH(TMPH) Ratings of Radial Tires
For the Load and Inflation Pressure Tables of Radial Tires
1) The figures are at 38˚C (or 100˚F) ambient temperature. If the ambient temperature is over 38˚C (or 100˚F), consult a Bridgestone Representative.
2) If the round-trip distance is less than 5km (or 3 miles), the above ratings can be increased by 12%.
3) If the Maximum Speed exceeds 50km/h (or 30 mph), consult a Bridgestone Representative.
4) When haul length exceeds 16km (10miles) one way, consult a Bridgestone Representative.
5) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8.
1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph)
2) Figures under the star rating denote the maximun load and inflation pressures.
3) For Loader & Dozer Service, Dig & Load Operation or distances are up to 76m (250ft) one way.
4) For Load & Carry operations, tire load limit will be adjusted following the table of page 53.
RADIAL TIRE 23
Tire Size
Recommended
Minimum
mm
inch
inch
TRA Code
or
Application
Spec
L317
★3
E4
-
177
121
1254
49.4
319
12.6
577
22.7
355
14.0
31.5
391
15.4
VMTP
★3
E4
E2A
136
93
1256
49.4
319
12.6
577
22.7
355
14.0
31.5
391
15.4
VSMS
★2
L5S
D2A
-
-
1275
50.2
312
12.3
573
22.6
364
14.3
57.0
-
VCH
★2
Industrial
Service
IDU
-
-
G2
G2A
LI/SS
TKPH TMPH
OTD
mm
Pattern
Size
24"
★1
VUT
★
kg
lbs
VSMS
Loader
10
5
IDU
★
kg
lbs
VCH
14.00R24 TG
Tubeless
-
-
1290
50.8
357
14.1
585
23.0
380
15.0
25.0
-
E2
E2A
106
73
1351
53.2
390
15.4
612
24.1
442
17.4
25.0
450
17.7
VSB
★3
E2
E2A
179
123
1365
53.7
390
15.4
628
24.7
433
17.0
21.0
450
17.7
VHB
★3
Industrial
Service
-
-
-
E4
E2A
E1A
91
119
62
82
1400
55.1
386
15.2
642
25.3
428
16.9
38.0
450
17.7
VRLS
★3
E4
E2A
85
58
1403
55.2
390
15.4
644
25.4
432
17.0
39.0
450
17.7
VSMS
★2
L5S
D2A
-
-
1394
54.8
390
15.4
634
25.0
437
17.2
72.0
-
VCH
★3
Industrial
Service
IDU
-
-
★3
Industrial
Service
IDU
-
-
VKT
★1
G2
L2
G2A
D2A
-
-
1351
53.2
370
14.6
612
24.1
422
16.6
25.0
-
VUT
★1
G2
G2A
-
-
1354
53.3
373
14.7
611
24.1
420
16.5
25.5
-
VSW
★3
G2
-
-
-
1351
53.2
390
15.4
594
23.4
446
17.6
23.5
-
VMTS
New
VCHS
196A5
550
80
575
83
600
87
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
825
120
★2
4875 5150 5300 5450 5600 5800 6000 6150 6300 6500 6500 6700 6900
11000 11400 11700 12000 12300 12800 13200 13600 13900 14300 14300 14700 15200
8.00TG
Grader
40
25
10.00W
VKT
VSB
VMTS
VRLS
E/M
50
30
VSMS
Loader
10
5
IDU
kPa
psi
200
29
225
33
★
kg
lbs
★1
1850 2000 2180 2360 2500 2650 2800 3000
4080 4400 4800 5200 5520 5840 6150 6600
kPa
psi
450
65
★
kg
lbs
★3
4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 5710 5830 5940 6050
8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 12500 12800 13100 13400
475
69
250
36
500
73
275
40
525
76
300
44
550
80
325
47
575
83
350
51
600
87
375
54
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
DG2
G4
G2A
★3
Industrial
Service
IDU
370
14.6
1400
55.1
-
VHB
VCH
VCHS
L2
★1
10.00W
14.00R24
★3
★1
525
76
VMTS
153A8
175A2
500
73
★3
196A5
★3
3050 3180 3300 3430 3550 3670 3790 3900 4020 4140 4250
6720 7010 7280 7560 7830 8090 8360 8600 8860 9130 9370
E/M
50
30
475
69
VKT
VCHS
450
65
L317
VMTP
VUT
14.00R24
kPa
psi
12.00R24
8.50V
13.00R24 TG
13.00R24 TG
Tubeless
24
Application
Max.Speed
km/h
mph
373
14.7
426
16.8
TBA
TBA
TBA
TBA
kPa
psi
200
29
Grader
40
25
★
kg
lbs
★1
2240 2430 2650 2800 3000 3250 3350 3650
4940 5360 5840 6150 6600 7150 7400 8050
Loader
10
5
★
kg
lbs
8.00TG
10.00VA
VKT
VUT
VSW
VMTS
VKT
VSW
★
★2
kg
5950 6200 6450 6700 6950 7200 7450 7700 7950 8200 8450 8700 8950 9200 9500
lbs 13120 13700 14220 14800 15300 15900 16400 16980 17500 18080 19600 19180 19690 20680 20900
225
33
250
36
275
40
300
44
325
47
350
51
375
54
525
76
550
80
★3 VSW=Consult a Bridgestone Representative.
★1
6700 6900
14800 15200
8.00TG
14.00R24TG
24"
12.00R24
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
Star
Rating
Pattern
38.0
VCHS
-
IDU
RADIAL
TIRE 25
★3
-
-
mm
21.0
Recommended
Minimum
mm
inch
inch
450
10.00W
17.7
Pattern
High-Speed
Service
-
-
Application
Max.Speed
km/h
mph
kPa
psi
VSB
-
450
65
480
70
520
75
550
80
590
85
620
90
660
95
Logging Load
kg
lbs
-
VSB
VHB
VHS
G2A
-
-
1473
58.0
418
16.5
675
26.6
470
18.5
28.5
-
VSW
★1
G2
-
-
-
1485
58.5
417
16.4
680
26.8
467
18.4
22.5
-
VSB
★3
E2
E2A
179
123
1365
53.7
390
15.4
628
24.7
433
17.0
21.0
450
17.7
VMTS
★3
E4
650
25.6
435
17.1
38.0
450
17.7
E4
62
93
58
389
15.3
★3
91
136
85
1406
55.4
VRLS
E2A
E3A
E2A
1403
55.2
389
15.3
650
25.6
435
17.1
39.0
450
17.7
-
-
-
1365
390
628
433
21.0
53.7
15.4
24.7
17.0
VKT
VSW
Grader
40
25
720
105
760
110
Size
790
115
L
(20PR)
3700 3910 4110 4310 4500 4690 4870 5150 5300 5450 5600
8150 8620 9070 9500 9930 10340 10730 11400 11700 12000 12300
HighSpeed
10.00VA
690
100
J
(18PR)
Range
G2
Maximum Speed = 88km/h (55mph)
kPa
psi
200
29
225
33
250
36
275
40
300
44
325
47
350
51
375
54
★
kg
lbs
★1
2900 3150 3350 3650 3875 4125 4375 4625
6400 6950 7400 8050 8550 9100 9650 10200
kPa
psi
450
65
★
kg
lbs
★3
4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 5710 5830 5940 6050
8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 12500 12800 13100 13400
kPa
psi
450
65
25"
VSB
170E
170E
170F
★3
170E
★3
VSW
Logging
High-Speed
Service
High-Speed
Service
-
★2
★1
VKT
★1
L2
VSDL
★1
L5
-
450
E/M
50
30
10.00/1.5
VSB
VSW
-
-
-
1355
394
631
427
53.3
15.5
24.8
16.8
23.5
450
10.00/1.5
-
-
1269
50.0
383
15.1
559
22.0
436
17.2
27.0
-
D2A
-
-
1275
50.2
392
15.4
570
22.4
445
17.5
23.5
-
D2A
-
-
1329
52.3
392
15.4
606
23.9
443
17.4
64.0
-
★2
E4
E2A
123
84
1535
60.4
450
17.7
696
27.4
507
20.0
45.0
513
20.2
VRLS
★2
E4
E2A
E1A
112
146
77
100
1531
60.3
448
17.6
697
27.4
510
20.1
45.0
513
20.2
VHB
★2
Industrial
Service
IDU
-
-
VCHD
★2
Industrial
Service
IDU
-
-
Industrial
Service
IDU
VSB
VHS
VSW
550
80
550
80
590
85
575
83
620
90
600
87
660
95
Loader
10
5
Grader
40
25
11.25/2.0
VMTS
VRLS
E/M
50
30
VHB
VCHD
VRLS
IDU
690
100
650
94
720
105
675
98
760
110
700
102
725
105
750
109
775
112
800
115
790
115
L
(20PR)
3700 3910 4110 4310 4500 4690 4870 5150 5300 5450 5600
8150 8620 9070 9500 9930 10340 10730 11400 11700 12000 12300
Maximum Speed = 88km/h (55mph)
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
★
★1
★2
kg
5000 5150 5450 5600 5800 6150 6300 6500 6700 6900 7100
lbs 11000 11400 12000 12300 12800 13600 13900 14300 14800 15200 15700
kPa
psi
125
18
150
22
★
kg
lbs
★1
1550 1750 2000 2180 2360 2575 2800 3000
3420 3860 4400 4800 5200 5680 6150 6600
kPa
psi
450
65
475
69
175
25
500
73
200
29
525
76
225
33
550
80
250
36
575
83
275
40
600
87
300
44
625
91
For slope and ditching service, inflation pressures should be increased by 100kPa
(15psi) with no increase in load rating.
For extreme conditions, consult a Bridgestone Representative for additional
recommended operating requirements.
650
94
675
98
700
102
★
★2
kg
5150 5450 5600 5800 6000 6300 6500 6700 6900 7100 7300
lbs 11400 12000 12300 12800 13200 13900 14300 14800 15200 15700 16100
-
625
91
J
(18PR)
HighSpeed
kPa
psi
VUT
520
75
525
76
Range
12.00/1.3
VUT
VKT
VSDL
480
70
500
73
Logging Load
kg
lbs
17.7
475
69
14.00R25
VSB
VMTS
VRLS
17.7
VMTS
★2
10.00/1.5
Logging
High-Speed
Service
G2, L2
DG2
VUT
VRLS
26
-
OTD
★1
New
16.00R25
Tubeless
-
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1365
390
628
433
53.7
15.4
24.7
17.0
VKT
VHS
15.5R25
Tubeless
TKPH TMPH
385/95R24 (14.00R24)
170E
★3
Logging
High-Speed
Service
High-Speed
Service
Spec
385/95R25 (14.00R25)
385/95R25
(14.00R25)
Tubeless
170E
TRA Code
or
Application
16.00R24 TG
170E
VHS
25"
14.00R25
Tubeless
Star
Rating
VSB
VHB
16.00R24 TG
Tubeless
LI/SS
15.5R25
385/95R24
(14.00R24)
Pattern
16.00R25
Tire Size
-
RADIAL TIRE 27
VKT
177E
★2
High-Speed
Service
-
-
-
VHB
177E
★2
High-Speed
Service
-
-
-
VHS
177E
174F
★2
High-Speed
Service
-
-
-
177E
★2
High-Speed
Service
-
-
-
VKT
★1
EG2
VUT
★1
E2
G2
L2
G2, L2
D2A
DG2
95
-
65
-
New
VSW
17.5R25
Tubeless
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Recommended
Minimum
mm
inch
inch
Size
HighSpeed
1339
52.7
440
17.3
600
23.6
490
19.3
27.0
-
1340
52.8
444
17.5
586
23.1
500
19.7
28.0
-
-
-
1340
52.8
440
17.3
597
23.5
480
18.9
27.0
-
VMT
★2
E3
L3
E1A
D2A
144
-
99
-
1352
53.2
443
17.4
600
23.6
514
20.2
30.0
-
VSDL
★1
★2
★1
L5
D2A
-
-
1400
55.1
440
17.3
639
25.2
495
19.5
68.0
-
★2
★1
L5S
D2A
-
-
1374
54.1
440
17.3
623
24.5
487
19.2
68.5
-
★2
High-Speed
Service
-
-
-
170E
Application
Max.Speed
km/h
mph
DG2
VGT
Pattern
VKT
VHB
VHS
VSW
G2
L2
153A8
176A2
VSMS
28
TKPH TMPH
★1
VSW
445/80R25
(17.5R25)
Tubeless
18.00R25
Tubeless
Spec
445/95R25 (16.00R25)
Star
Rating
14.00/1.5
★2
E2
E1A
239
164
1610
63.4
510
20.1
733
28.9
571
22.5
31.0
587
23.1
VEL
★2
E3
E2A
181
124
1605
63.2
506
19.9
729
28.7
580
22.8
34.0
587
23.1
★3
Industrial
Service
-
-
-
275
40
★1
★2
3350 3550 3750 4000 4125 4375 4625 4750 5000 5150 5450
7400 7850 8250 8800 9100 9650 10200 10500 11000 11400 12000
VKT
VMT
E/M
50
30
★
kg
lbs
VUT
VKT
VSW
VMT
VSDL
VSMS
Loader
10
5
★
kg
lbs
VUT
VKT
VSW
Grader
40
25
VGT
HighSpeed
VKT
kPa
psi
VKT
VEL
VMTS
VELS
E/M
50
30
VSMS
Loader
10
5
IDU
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
★1
★2
6000 6150 6500 6700 7100 7300 7500 7750 8000 8250 8500
13200 13600 14300 14800 15700 16100 16500 17100 17600 18200 18700
kPa
psi
125
18
★
kg
lbs
★1
1850 2120 2360 2650 2900 3075 3350 3650
4080 4680 5200 5840 6400 6800 7400 8050
150
22
175
25
200
29
225
33
250
36
275
40
300
44
For slope and ditching service, inflation pressures should be increased by 100kPa
(15psi) with no increase in load rating.
For extreme conditions, consult a Bridgestone Representative for additional
recommended operating requirements.
kPa
psi
13.00/2.5
300
44
17.5R25
LI/SS
445/80R25
(17.5R25)
445/95R25
(16.00R25)
Tubeless
TRA Code
or
Application
Pattern
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
825
120
★
★2
kg
6700 7100 7300 7500 7750 8000 8250 8500 8750 9000 9250
lbs 14800 15700 16100 16500 17100 17600 18200 18700 19300 19800 20400
VMTS
★2
E4
E2A
169
116
1649
64.9
514
20.2
754
29.7
571
22.5
51.0
587
23.1
VELS
★2
E4
E2A
E1A
144
179
99
123
1638
64.5
515
20.3
744
29.3
580
22.8
50.0
587
23.1
VSMS
★2
★1
L5S
D2A
-
-
1675
65.9
512
20.2
733
28.9
592
23.3
84.5
-
★2
Industrial
Service
-
-
-
18.00R25
Tire Size
13.00/2.5
VEL
VSMS
★
kg
lbs
★1
★2
11200 11800 12150 12500 12850 13200 13600 14000 14500 15000 15000 15500 16000
24700 26000 26800 27600 28300 29100 30000 30900 32000 33100 33100 34200 35300
RADIAL TIRE 29
20.5R25
Tubeless
Spec
TKPH TMPH
★3
Industrial
Service
IDU
-
-
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
★3
Industrial
Service
IDU
-
-
VHB
186E
★2
High-Speed
Service
-
-
-
VHS
186E
★2
High-Speed
Service
-
-
-
★2
★1
E2
L2
E2A
D2A
160
-
110
-
1470
57.9
530
20.9
644
25.4
597
23.5
30.5
MS
E2, L2
DE2
-
-
1470
57.9
530
20.9
640
25.2
603
23.7
30.5
VUT
VLT
177B
186A2
VMT
Application
Max.Speed
km/h
mph
VHB
VHS
HighSpeed
-
17.00AL/1.7(★1only)
17.00/2.0
-
★1
G2, L2
DG2
-
-
1473
58.0
533
21.0
643
25.3
608
23.9
30.5
-
MS
E3
L3
DE2
149
-
102
-
1495
58.9
533
21.0
676
26.6
586
23.1
40.0
-
★1
L3
D2A
-
-
1480
530
652
597
33.0
-
VKT
VSW
VLT
VLTS
VUT
E/M
50
30
Grader
40
25
kPa
psi
275
40
★
kg
lbs
★1
★2
4375 4750 5000 5300 5600 5800 6150 6500 6700 6900 7300
9650 10500 11000 11700 12300 12800 13600 14300 14800 15200 16100
kPa
psi
125
18
★
kg
lbs
★1
2430 2800 3150 3450 3875 4125 4375 4625
5360 6150 6950 7600 8550 9100 9650 10200
VJT
186A2
★1
L3
D2A
-
-
1480
58.3
530
20.9
652
25.7
597
23.5
33.0
-
VLTS
177B
186A2
MS
E4
L4
DE2
126
-
86
-
1478
58.2
530
20.9
667
26.3
581
22.9
49.0
-
★2
★1
L5
D2A
-
-
1552
61.1
531
20.9
704
27.7
583
23.0
78.0
-
525/80R25
(20.5R25)
Tubeless
21.00R25
Tubeless
★2
High-Speed
Service
-
308
211
E7
-
30
VHS
VSJ
179E
VUT
VKT
VSW
VLT
VMT
VJT
VLTS
VSDL
Loader
10
5
VHS
HighSpeed
-
VSJ
-
300
44
150
22
325
47
175
25
350
51
200
29
375
54
225
33
400
58
250
36
425
62
275
40
450
65
475
69
500
73
525
76
300
44
For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating.
For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.
kPa
psi
VSDL
Size
IDU
214A5
VSW
Pattern
VHB
VCHS
VCHS
VKT
Recommended
Minimum
mm
inch
inch
18.00R25
TRA Code
or
Application
505/95R25 (18.00R25)
VHB
Star
Rating
20.5R25
505/95R25
(18.00R25)
Tubeless
LI/SS
★
kg
lbs
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
★1
★2
8000 8250 8750 9000 9500 9750 10000 10300 10900 11200 11500
17600 18200 19300 19800 20900 21500 22000 22700 24000 24700 25400
525/80R25
18.00R25
Tubeless
Pattern
21.00R25 (20.5R25)
Tire Size
Sand
RADIAL TIRE 31
Spec
TKPH TMPH
VKT
★2
★1
E2
L2
E2A
D2A
205
-
140
-
VSW
MS
E2, L2
DE2
-
-
1596
62.8
620
24.4
692
27.2
689
27.1
31.5
-
VUT
★1
G2, L2
DG2
-
-
1599
63.0
620
24.4
702
27.6
688
27.1
33.5
-
MS
E3
L3
DE2
190
-
130
-
1623
63.9
616
24.3
734
28.9
680
26.8
42.5
-
★2
E3
L3
E2A
D2A
190
-
130
-
1600
63.0
617
24.3
702
27.6
688
27.1
35.0
-
L3
D2A
-
-
1602
63.1
616
24.3
696
27.4
695
27.4
35.0
-
VLT
185B
195A2
OTD
mm
33.0
Pattern
VJT
195A2
VLTS
185B
195A2
MS
E4
L4
DE2
161
-
110
-
1616
63.6
612
24.1
729
28.7
675
26.6
54.0
-
VSDT
201A2
195A2
★2
★1
L5
D2A
-
-
1660
65.4
621
24.4
745
29.3
680
26.8
79.0
-
★2
★1
L5
D2A
-
-
1672
65.8
608
23.9
755
29.7
677
26.7
87.0
-
★2
IDU
-
-
E2A
162
111
1486
58.5
635
25.0
670
26.4
690
27.2
30.5
-
VSDL
VKT
VSW
VLT
VMT
VJT
VLTS
VUT
VKT
VSW
VLT
VMT
VJT
VLTS
VSDT
VSDL
VSDL
Loader
10
5
20.00/2.0
VKT
E/M
50
30
Loader
10
5
VKT
★2
550/65R25
Tubeless
VTS
★1
L3
D2A
-
-
1350
53.1
547
21.5
594
23.4
605
23.8
32.5
-
(14.00/1.5)
17.00/2.0
VTS
650/65R25
Tubeless
VTS
★1
L3
D2A
-
-
1502
59.1
642
25.3
660
26.0
710
28.0
37.0
-
19.50/2.5
VTS
750/65R25
(30/65R25)
Tubeless
VLT
MS
E3
L3
DE2
225
-
154
-
1625
64.0
765
30.1
718
28.3
831
32.7
43.0
-
(22.00/3.0)
24.00/3.0
VLT
VLTS
★1
L3
D2A
-
-
1607
63.3
745
29.3
701
27.6
833
32.8
41.0
-
★2
E4
E2A
195
134
E2
L2
E2A
-
257
-
176
-
765
30.1
677
26.7
713
28.1
756
29.8
832
32.8
772
30.4
55.0
★2
1623
63.9
1732
68.2
-
E3
L3
DE2
220
-
151
-
1755
69.1
678
25.7
787
31.0
736
29.0
45.0
-
★2
★1
L3
D2A
-
-
1735
68.3
684
26.9
754
29.7
766
30.2
38.0
-
MS
E3
L3
DE2
220
-
151
-
1737
68.4
682
26.9
754
29.7
766
30.2
38.0
-
VLTS
26.5R25
Tubeless
190B
VKT
VLT
193B
202A2
VMT
VJT
193B
202A2
★1
MS
39.0
Grader
40
25
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
★
★1
★2
kg
5600 6000 6500 6700 7100 7500 7750 8250 8500 9000 9250
lbs 12300 13200 14300 14800 15700 16500 17100 18200 18700 19800 20400
kPa
psi
125
18
★
kg
lbs
★1
3150 3550 4000 4500 4875 5300 5600 6000
6950 7850 8800 9900 10700 11700 12300 13200
kPa
psi
25/65R25
Tubeless
190B
202A2
E/M
50
30
275
40
Size
150
22
175
25
200
29
225
33
250
36
275
40
300
44
Industrial
Service
E2
VTS
32
★1
★1
kPa
psi
VUT
VMT
Application
Max.Speed
km/h
mph
23.5R25
Recommended
Minimum
mm
inch
inch
19.50/2.5
-
TRA Code
or
Application
LI/SS
VLT
VTS
22.00/3.0
275
40
300
44
325
47
★
kg
lbs
350
51
375
54
400
58
425
62
VKT
VLT
VJT
E/M
50
30
VKT
VLT
VMT
VJT
Loader
10
5
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
★1
★2
10300 10600 11200 11500 12150 12500 12850 13200 13600 14000 14500
22700 23400 24700 25400 26800 27600 28300 29100 30000 30900 32000
IDU
E/M
50
30
Loader
10
5
450
65
★
kg
5600 6000 6300
lbs 12350 13200 13850
★
kg
lbs
★
kg
lbs
★
kg
6900 7300 7750
lbs 15200 16100 17100
★
kg
lbs
★2
6700 7100 7450 7750
14800 15600 16350 17100
750/65R25 (30/65R25) 650/65R25 550/65R25 25/65R25
23.5R25
Tubeless
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1602
612
690
686
63.1
24.1
27.2
27.0
Star
Rating
Pattern
★1
7500 7750 8250 8500
16500 17100 18200 18700
★1
10000 10600 10900 11500
22000 23400 24000 25400
★2
8250 8750 9250 9750 10300 10600
18200 19300 20400 21500 22700 23400
★1
13200 13600 14500 15000
29100 30000 32000 33100
★
★1
★2
kg
7100 7500 8000 8500 9000 9500 9750 10300 10600 11200 11500
lbs 15700 16500 17600 18700 19800 20900 21500 22700 23400 24700 25400
★
kg
lbs
26.5R25
Tire Size
★1
★2
12850 13200 14000 14500 15000 15500 16000 16500 17000 18000 18500
28300 29100 30900 32000 33100 34200 35300 36400 37500 39700 40800
RADIAL TIRE 33
TKPH TMPH
VLTS
193B
★2
E4
E2A
186
127
MS
E4
L4
DE2
165
-
113
-
1779
70.0
685
27.0
799
31.5
740
29.1
57.5
-
VSDT
209A2
202A2
60.0
L5
D2A
D2A
-
-
1775
69.9
697
27.4
790
31.1
778
30.6
88.0
-
★2
★1
L5
D2A
-
-
1790
70.5
684
26.9
797
31.4
761
30.0
95.5
-
VSMS
★2
★1
L5S
D2A
-
-
1775
69.9
684
26.9
810
31.9
746
29.4
95.0
-
VKT
★2
E2
E2A
E1A
310
376
212
258
1861
73.3
762
30.0
822
32.4
844
33.2
44.0
-
MS
E3
L3
DE2
266
-
182
-
1885
74.2
762
30.0
840
33.1
830
32.7
48.0
-
★2
E3
182
242
154
762
30.0
808
31.8
868
34.2
42.0
-
L3
E4
266
354
225
1865
73.4
★1
★2
E2A
E1A
D2A
E2A
1865
73.4
762
30.0
835
32.9
844
33.2
65.0
-
MS
E4
L4
DE2
220
-
151
-
1905
75.0
768
30.2
849
33.4
835
32.9
60.0
-
200B
208A2
VMT
VLTS
208A2
200B
VSNT
VSDT
875/65R29
Tubeless
mm
VSDL
VLT
29"
775/65R29
Tubeless
★2
★2
★1
OTD
216A2
208A2
★2
★2
★1
L5
D2A
D2A
-
-
1903
74.9
779
30.7
845
33.3
869
34.2
96.0
-
25.00/3.5
VSDL
★2
★1
L5
D2A
-
-
1925
75.8
766
30.2
855
33.7
846
33.3
104.0
-
VTS
★1
L3
D2A
-
-
1740
68.5
775
30.5
762
30.0
843
33.2
43.0
-
(24.00/3.5)
25.00/3.5
VTS
MS
E3
L3
DE2
-
-
1865
73.4
850
33.5
804
31.7
982
38.7
47.5
-
27.00/3.5
(28.00/3.5)
Pattern
VKT
★2
E2
E2A
E1A
330
401
226
275
1958
77.1
765
30.1
870
34.3
841
33.1
44.0
-
VSNT
MS
E4
L4
DE2
232
-
159
-
2000
78.7
774
30.5
905
35.6
849
34.6
60.0
-
New
VSDT
VSDL
34
218A2
211A2
★2
★2
★1
★2
★1
L5
D2A
D2A
-
-
1989
78.3
779
30.7
883
34.8
872
34.3
96.0
-
L5
D2A
-
-
2008
79.1
776
30.6
900
35.4
856
33.7
104.5
-
25.00/3.5
kPa
psi
275
40
300
44
325
47
E/M
50
30
VSNT
VSDT
VSDL
VSMS
Loader
10
5
VKT
VLT
VMT
VLTS
VSNT
E/M
50
30
VLT
VMT
VSNT
VSDT
VSDL
Loader
10
5
★
kg
lbs
Loader
10
5
E/M
50
30
Loader
10
5
E/M
50
30
Loader
10
5
★
kg
lbs
★
kg 10000 10900 11500
lbs 22000 24000 25400
★
kg
lbs
★
kg
9250 9750 10300
lbs 20400 21500 22700
★
kg
lbs
29"
VTS
VTS
VKT
VSNT
VSNT
VSDT
VSDL
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
Size
575
83
600
87
625
91
650
94
★
★1
★2
kg
7100 7500 8000 8500 9000 9500 9750 10300 10600 11200 11500
lbs 15700 16500 17600 18700 19800 20900 21500 22700 23400 24700 25400
VLTS
VSNT
VTS
29.5R29
Tubeless
Application
Max.Speed
km/h
mph
★
kg
lbs
★1
★2
12850 13200 14000 14500 15000 15500 16000 16500 17000 18000 18500
28300 29100 30900 32000 33100 34200 35300 36400 37500 39700 40800
26.5R25
Spec
★
★1
★2
kg
8500 9250 9750 10300 10900 11500 11800 12500 12850 13600 14000
lbs 18700 20400 21500 22700 24000 25400 26000 27600 28300 30000 30900
★1
★2
15500 16000 17000 17500 18000 19000 19500 20000 20600 21200 22400
34200 35300 37500 38600 39700 41900 43000 44100 45400 46700 49400
29.5R25
TRA Code
or
Application
★1
15000 15500 16500 17000
33100 34200 36400 37500
★2
12150 12850 13600 14000 14500 15500
26800 28300 30000 30900 32000 34200
★1
18500 19500 20600 21200
40800 43000 45400 46700
★1
★2
10900 11500 12150 12500 13200 13600 14500 15000
24000 25400 26800 27600 29100 30000 32000 33100
★1
★2
16500 17000 18000 18500 19500 20000 20600 21200 22400 23000 23600
36400 37500 39700 40800 43000 44100 45400 46700 49400 50700 52000
775/65R29
Star
Rating
VSNT
29.5R25
Tubeless
Recommended
Minimum
mm
inch
inch
22.00/3.0
-
LI/SS
875/65R29
26.5R25
Tubeless
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1736
675
784
743
68.3
26.6
30.9
29.3
Pattern
29.5R29
Tire Size
RADIAL TIRE 35
LI/SS
VSMS
Star
Rating
TRA Code
or
Application
Spec
★2
L5S
D2A
TKPH TMPH
-
-
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
2008
766
904
861
79.1
30.2
35.6
33.9
Recommended
Minimum
mm
mm
inch
inch
104.5
25.00/3.5
-
OTD
Pattern
★2
E3
E2A
E1A
349
476
239
326
2076
81.7
864
34.0
906
35.7
943
37.1
54.0
-
27.00/3.5
VFT
★2
E2
822
32.4
567
22.3
30.5
587
23.1
13.00/2.5
E3
1805
71.1
500
19.7
835
32.9
560
22.0
35.0
587
23.1
VMTS
★2
E4
192
225
146
180
210
136
168
500
19.7
★2
281
328
213
263
307
199
246
1811
71.3
VEL
E1A
E3A
E2A
E1A
E3A
E2A
E1A
1862
73.3
515
20.3
849
33.4
576
22.7
51.0
587
23.1
VMTP
★2
E4
E2A
E1A
185
229
127
157
1870
73.6
515
20.3
846
33.3
575
22.6
55.0
587
23.1
VELS
★2
E4
116
145
168
-
512
20.2
856
33.7
575
22.6
49.0
587
23.1
Industrial
Service
170
211
246
-
1856
73.1
★3
E2A
E1A
E3A
-
300
44
325
47
350
51
375
54
★
kg
lbs
★
kg 11200 12150 12850 13600 14000
lbs 24700 26800 28300 30000 30900
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
★2
16500 17000 18000 18500 19500 20000 20600 21200 22400 23000 23600
36400 37500 39700 40800 43000 44100 45400 46700 49400 50700 52000
★2
15000 15500 16500 17000 17500 18500
33100 34200 36400 37500 38600 40800
33"
★2
VRQP
VCHS
21.00R33
Tubeless
VLT
Loader
10
5
E/M
50
30
275
40
Size
219A5
★3
E4
Industrial
Service
IDU
122
-
84
1890
74.4
515
20.3
876
34.5
575
22.6
64.5
587
23.1
VFT
VEL
VMTS
VMTP
VELS
VRQP
E/M
50
30
VCHS
VELS
IDU
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
★
★2
kg
7750 8000 8500 8750 9000 9250 9750 10000 10300 10600 10900
lbs 17100 17600 18700 19300 19800 20400 21500 22000 22700 23400 24000
18.00R33
E2ALS
kPa
psi
13.00/2.5
VMTP
★2
E4
E2A
E1A
237
293
162
201
1998
78.7
578
22.8
909
35.8
650
25.6
61.0
701
27.6
VRLS
★2
E4
E2A
227
155
1978
77.9
578
22.8
899
35.4
650
25.6
54.0
701
27.6
VSNT
MS
E4
L4
DE2
250
-
171
-
2075
81.7
904
35.6
936
36.9
976
38.4
62.5
-
VSNL
★2
★2
L4
D2A
D2A
-
-
2075
81.7
880
34.6
936
36.9
981
38.6
62.5
-
★1
L5
D2A
-
-
2075
81.7
890
35.0
914
36.0
990
39.0
96.0
-
★2
★1
L5
D2A
-
-
2075
81.7
880
34.6
917
36.1
951
37.4
95.0
-
★2
Industrial
Service
IDU
-
-
15.00/3.0
VMTP
VRLS
E/M
50
30
★
★2
kg 10000 10300 10900 11200 11500 11800 12500 12850 13200 13600 14000
lbs 22000 22700 24000 24700 25400 26000 27600 28300 29100 30000 30900
21.00R33
33"
18.00R33
Tubeless
VLT
kPa
psi
VSMS
33.25R29
Tubeless
Application
Max.Speed
km/h
mph
29.5R29
29.5R29
Tubeless
Pattern
33.25R29
Tire Size
21.00R33
VSDT
VSDL
36
217A2
kPa
psi
28.00/3.5
VSNT
VSNT
VSNL
VSDT
VSDL
VSDL
E/M
50
30
Loader
10
5
275
40
300
44
325
47
350
51
375
54
400
58
425
62
★
kg 10600 11500 12150 12850 13600 14000 15000
lbs 23400 25400 26800 28300 30000 30900 33100
★
kg
19500 20600
lbs
43000 45400
450
65
475
69
500
73
15500 16000 17000
34200 35300 37500
★1
21200 22400 23000
46700 49400 50700
525
76
550
80
575
83
600
87
625
91
650
94
★2
17500
38600
★2
23600 25000 25750 26500 27250 28000
52000 55100 56800 58400 60000 61500
35/65R33
35/65R33
Tubeless
IDU
RADIAL TIRE 37
★2
E3
VMTS
★2
E4
VMTP
★2
VELS
OTD
Recommended
Minimum
mm
inch
inch
TKPH TMPH
E3A
E2A
E1A
410
265
328
281
182
225
1993
78.5
568
22.4
912
35.9
646
25.4
37.5
701
27.6
2038
80.2
575
22.6
932
36.7
655
25.8
54.0
701
27.6
E4
E2A
E1A
237
293
162
201
2048
80.6
577
22.7
922
36.3
655
25.8
61.0
701
27.6
★2
E4
E2A
E1A
227
281
155
192
2044
80.5
577
22.7
935
36.8
650
25.6
59.0
701
27.6
VEL
★2
E3
E1A
448
307
2123
83.6
660
26.0
950
37.4
741
29.2
44.0
795
31.3
VMTS
★2
E4
980
38.6
734
28.9
59.0
795
31.3
E4
335
215
266
660
26.0
★2
489
314
388
2175
85.6
VMTP
E3A
E2A
E1A
2194
86.4
660
26.0
975
38.4
734
28.9
68.0
795
31.3
VRLS
★2
E4
980
38.6
734
28.9
59.0
795
31.3
E4
215
266
310
142
660
26.0
★2
314
388
453
207
2175
85.6
VRQP
E2A
E1A
E3A
E2ALS
2194
86.4
660
26.0
995
39.2
745
29.3
71.5
795
31.3
VRL
★2
E3
E1A
380
260
2120
83.5
768
30.2
932
36.7
844
33.2
39.5
-
mm
Pattern
38
Size
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
VEL
VMTS
VMTP
VELS
E/M
50
30
★
★2
kg 10300 10600 11200 11500 11800 12150 12850 13200 13600 14000 14500
lbs 22700 23400 24700 25400 26000 26800 28300 29100 30000 30900 32000
VEL
VMTS
VMTP
VRLS
VRQP
E/M
50
30
★
★2
kg 13200 13600 14000 14500 15500 16000 16500 17000 17500 18000 18500
lbs 29100 30000 30900 32000 34200 35300 36400 37500 38600 39700 40800
24.00R35
17.00/3.5
450
65
21.00R35
kPa
psi
VRL
★2
E3
E1A
472
323
2228
87.7
846
33.3
990
39.0
970
38.2
49.0
-
27.00/3.5
VRL
37.25R35
Tubeless
VLT
★2
E3
E2A
E1A
417
569
286
390
2388
94.0
954
37.6
1054
41.5
1063
41.9
59.5
-
31.00/4.0
VLT
VRL
VRL
★2
E3
E1A
563
386
2370
93.3
954
37.6
1045
41.1
1063
41.9
51.0
-
VKT
★2
E2
E1A
696
477
2524
99.4
982
38.7
1120
44.1
1080
42.5
51.0
-
32.00/4.5
VLT
★2
E3
E2A
E1A
500
682
342
467
2609
102.6
1002
39.4
1157
45.6
1127
44.4
58.5
-
32.00/4.5
VRL
★2
E3
E1A
675
462
2588
101.9
1002
39.4
1147
45.2
1125
44.3
48.5
-
39"
VKT
VLT
VRL
275
40
300
44
325
47
350
51
375
54
E2
E3
E3
★
kg 10000 10600 11200 11800 12500
lbs 22000 23400 24700 26000 27600
★
kg 12150 12850 14000 14500 15500
lbs 26800 28300 30900 32000 34200
★
kg 14500 15500 16500 17500 18500
lbs 32000 34200 36400 38600 40800
E/M
50
30
E/M
50
30
★
kg 16000 17000 18000
lbs 35300 37500 39700
★
kg 18000 19000 20600
lbs 39700 41900 45400
E/M
E3
50
30
E2
E3
400
58
425
62
450
65
475
69
500
73
525
76
29.5R35
kPa
psi
25.00/3.5
33.25R35
Tubeless
40.5/75R39
Tubeless
35"
15.00/3.0
VRL
39"
37.5R39
Tubeless
Application
Max.Speed
km/h
mph
★2
13200 13600 14500 15000 15500 16000
29100 30000 32000 33100 34200 35300
★2
16000 17000 17500 18500 19000 20000
35300 37500 38600 40800 41900 44100
★2
19500 20600 21200 22400 23000 23600
43000 45400 46700 49400 50700 52000
33.25R35
29.5R35
Tubeless
VEL
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
Spec
37.25R35
24.00R35
Tubeless
TRA Code
or
Application
LI/SS
★2
19000 20000 21200 21800 23000 23600 25000 25750
41900 44100 46700 48100 50700 52000 55100 56800
★2
21800 22400 23600 25000 25750 27250 28000 29000
48100 49400 52000 55100 56800 60000 61500 64000
37.5R39
35"
21.00R35
Tubeless
Star
Rating
Pattern
40.5/75R39
Tire Size
RADIAL TIRE 39
TRA Code
or
Application
Spec
★1
L5
D2A
TKPH TMPH
-
-
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
2580
1074
1116
1205
101.6
42.3
43.9
47.4
Recommended
Minimum
mm
mm
inch
inch
116.0
32.00/4.5
36.00/4.5
OTD
Pattern
27.00R49
Tubeless
31/90R49
Tubeless
51"
30.00R51
Tubeless
40
L4
D2A
-
-
2730
107.5
1123
44.2
TBA
TBA
TBA
TBA
75.0
-
VSDL
★2
★1
L5
D2A
-
-
2730
107.5
1123
44.2
1188
46.8
1274
50.2
111.5
-
VFT
★2
E2
E1A
562
385
2486
97.9
656
25.8
1147
45.2
738
29.1
38.5
795
31.3
VMTP
★2
E4
E2A
-
361
-
247
-
2547
100.3
656
25.8
1175
46.3
735
28.9
68.0
795
31.3
VRLS
★2
E4
1166
45.9
738
29.1
59.0
795
31.3
E2
2646
104.2
750
29.5
1207
47.5
835
32.9
44.0
892
35.1
VRL
★2
E3
2645
104.1
750
29.5
1205
47.4
835
32.9
42.5
892
35.1
VMTS
★2
E4
2690
105.9
750
29.5
1230
48.4
835
32.9
64.0
892
35.1
VMTP
★2
E4
2708
106.6
750
29.5
1239
48.8
835
32.9
73.0
892
35.1
VRLS
★2
E4
2687
105.8
750
29.5
1231
48.5
835
32.9
66.5
892
35.1
VRDP
★2
E4
2711
106.7
750
29.5
1240
48.8
835
32.9
76.0
892
35.1
VELSF
★2
E4
234
288
337
382
551
441
516
333
411
481
301
373
436
284
351
411
284
351
411
292
362
656
25.8
★2
341
421
492
557
804
644
753
486
600
702
440
544
636
415
513
600
415
513
600
427
528
2531
99.6
VFT
E2A
E1A
E3A
E2A
E3A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
2694
106.1
771
30.4
1228
48.3
862
33.9
66.5
VHS
★2
E2
E1A
1001
686
2826
111.3
854
33.6
1282
50.5
950
37.4
VMT
★2
E3
1294
50.9
E4
729
340
413
491
854
33.6
★2
1065
496
603
717
2850
112.2
VRLS
E3A
E2A
E1A
E3A
2911
114.6
854
33.6
1311
51.6
36.00/4.5
17.00/3.5
45"
VSNL
VSDL
49"
VFT
VMTP
VRLS
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
Loader
10
5
★
kg
lbs
Loader
10
5
★
★1
★2
kg 35500 37500 38750 40000 42500 43750 45000 46250 47500 50000 51500
lbs 78500 82500 85500 88000 93500 96500 99000 102000 104500 110000 113500
675
98
700
102
★1
33500 34500 36500 37500 40000
74000 76000 80500 82500 88000
E/M
50
30
★
kg
lbs
★2
15500 16500 17000 17500 18500 19000 19500 20000 20600 21200 21800
34200 36480 37500 38600 40800 41900 43000 44100 45400 46700 48100
24.00R49
★2
400
58
Size
19.50/4.0
VFT
VRL
VMTS
VMTP
VRLS
VRDP
E/M
50
30
★
kg
lbs
★2
19500 20000 20600 21800 22400 23000 23600 25000 25750 26500 27250
43000 44100 45400 48100 49400 50700 52000 55100 56800 58400 60000
956
37.6
19.50/4.0
VELSF
E/M
50
30
★
kg
lbs
★2
20600 21200 22400 23000 23600 25000 25750 26500 27250 27800 29000
45400 46700 49400 50700 52000 55100 56800 58400 60000 61500 64000
37.5
993
39.1
22.00/4.5
E/M
50
30
★
kg
lbs
★2
23600 25000 25750 26500 28000 29000 30000 30750 31500 32500 33500
52000 55100 56800 58400 61500 64000 66000 68000 69500 71500 74000
950
37.4
45.0
993
39.1
963
37.9
74.5
993
39.1
27.00R49
49"
24.00R49
Tubeless
VSNL
kPa
psi
VSDL
45"
45/65R45
Tubeless
Application
Max.Speed
km/h
mph
45/65R39
Star
Rating
45/65R45
VSDL
LI/SS
51"
VHS
VMT
VRLS
31/90R49
45/65R39
Tubeless
Pattern
30.00R51
Tire Size
RADIAL TIRE 41
E4
VRLS
★2
E4
VRDP
★2
E4
VHS
★2
E2
VRLS
★2
E4
VSDL
★2
L5
VZTS
★2
E4
VELSL
★2
E4
VRLS
★2
E4
42/90R57
Tubeless
VRDP
★2
E4
40.00R57
Tubeless
VMT
★2
E3
VZTS
★2
E4
VELSL
★2
E4
VELS
★2
E4
VRDP
★2
E4
VRPS
★2
E4
VZTP
★2
E4
VELS
★2
E4
36.00R51
Tubeless
50/65R51
Tubeless
57"
37.00R57
Tubeless
New
46/90R57
Tubeless
42
697
828
405
479
E2A
E1A
E3A
E2A
E1A
E3A
E3A
E2A
E1A
E3A
D2A
558
679
807
558
679
807
1485
642
781
927
-
382
465
553
382
465
553
1017
440
535
635
-
E2A
E1A
E3A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
694
845
1003
1148
694
845
1003
715
870
1033
1204
1463
1739
773
940
1117
1330
773
940
1117
773
940
1117
773
940
1117
766
927
1103
796
968
1150
475
579
687
786
475
579
687
490
596
708
825
1002
1191
529
644
765
911
529
644
765
529
644
765
529
644
765
401
635
755
545
663
788
mm
48.0
Recommended
Minimum
mm
inch
inch
1074
24.00/5.0
42.3
Pattern
Application
Max.Speed
km/h
mph
kPa
psi
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
Size
700
102
VMT
VMTP
VRLS
VRDP
E/M
50
30
★
kg
lbs
★2
27250 29000 30000 30750 32500 33500 34500 35500 36500 37500 38750
60000 64000 66000 68000 71500 74000 76000 78500 80500 82500 85500
26.00/5.0
VHS
VRLS
E2
★
kg
lbs
★2
33500 35500 36500 37500 38750 40000 41250 42500 43750 45000 46250
74000 78500 80500 82500 85500 88000 91000 93500 96500 99000 102000
-
40.00/4.5
VSDL
Loader
10
5
87.5
1217
47.9
27.00/6.0
1190
46.9
77.0
1217
47.9
1535
60.4
1190
46.9
87.5
1217
47.9
1060
41.7
1539
60.6
1210
47.7
97.0
1323
52.1
3512
138.3
1108
43.6
1560
61.4
1264
49.8
64.0
1311
51.6
3585
141.1
1140
44.9
1606
63.2
1289
50.7
91.5
1311
51.6
3542
139.4
1108
43.6
1575
62.0
1264
49.8
80.0
1311
51.6
3562
140.2
1127
44.4
1582
62.3
1291
50.8
91.5
1311
51.6
3575
140.7
1108
43.6
1591
62.6
1264
49.8
97.0
1311
51.6
3575
140.7
1108
43.6
1591
62.6
1264
49.8
97.0
1311
51.6
3585
141.1
1145
45.1
1591
62.6
1299
51.1
97.0
1412
55.6
3557
140.0
1145
45.1
1577
62.1
1299
51.1
88.0
1412
55.6
3063
120.6
932
36.7
1376
54.2
1052
41.4
89.5
1074
42.3
3036
119.5
932
36.7
1371
54.0
1051
41.4
78.5
1074
42.3
3061
120.5
932
36.7
1376
54.2
1051
41.4
87.0
1074
42.3
3108
122.4
1015
40.0
1390
54.7
1163
45.4
44.0
1184
46.6
3204
126.1
1015
40.0
1431
56.3
1153
45.4
86.5
1184
46.6
3070
120.9
1278
50.3
1347
53.0
1361
53.6
128.0
3422
134.7
1044
41.1
1541
60.7
1190
46.9
3388
133.4
1044
41.1
1524
60.0
3410
134.3
1044
41.1
3456
136.1
33.00R51
★2
1018
1209
591
700
OTD
36.00R51
VMTP
E1A
E3A
E2A
E1A
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
2988
932
1338
1052
117.6
36.7
52.7
41.4
★
★2
kg 45000 47500 50000 51500 54500 56000 58000 60000 61500 63000 65000
lbs 99000 104500 110000 113500 120000 123000 127500 131500 135500 139000 143500
57"
VZTS
VELSL
VRLS
E4
E/M
E4
50
E4
30
★
kg
lbs
★2
37500 38750 40000 41250 43750 45000 46250 47500 48750 50000 51500
82500 85500 88000 91000 96500 99000 102000 104500 107500 110000 113500
27.00/6.0
VRDP
E4
29.00/6.0
VMT
VZTS
VELSL
VELS
VRDP
VRPS
E3
E4
E4
E4
E4
★
kg
lbs
★
kg
lbs
★2
38750 40000 41250 42500 45000 46250 47500 48750 50000 51500 53000
85500 88000 91000 96500 99000 102000 104500 107500 110000 113500 117000
★2
42500 45000 46250 48750 50000 51500 53000 54500 56000 58000 60000
93500 99000 102000 107500 110000 113500 117000 120000 123500 128000 132500
29.00/6.0
(32.00/6.0)
VZTP
VELS
E/M
50
30
★
kg
lbs
★2
45000 47500 48750 51500 53000 54500 56000 58000 60000 61500 63000
99000 104500 107500 113500 117000 120000 123500 128000 132500 135500 139000
50/65R51
E3
TKPH TMPH
37.00R57
★2
Spec
42/90R57
VMT
33.00R51
Tubeless
LI/SS
40.00R57
TRA Code
or
Application
Pattern
46/90R57
Star
Rating
Tire Size
RADIAL TIRE 43
E4
VRPS
★2
E4
55.5/80R57
Tubeless
VSDL
L5
50/90R57
Tubeless
VELS
★2
E4
VRPS
★2
E4
New
60/80R57
Tubeless
VSDL
63"
53/80R63
Tubeless
59/80R63
Tubeless
VRF
★2
E3
VRLSA
★2
E4
VRDP
★2
E4
VRPS
★2
E4
VRD
★2
E3
VRF
VRDP
New
44
L5
VRPS
★2
★2
★2
E3
E4
E4
E2A
E1A
E3A
E2A
E1A
E3A
D2A
796
968
1150
796
968
1150
-
E1A
E3A
E2A
E1A
E3A
D2A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E1A
E3A
E1A
E3A
E1A
E3A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
1092
1278
884
1092
1278
-
1628
1045
1233
1512
974
1150
1408
974
1150
1408
1784
2050
1686
1937
1784
2050
1686
1937
1228
1515
1773
1160
1431
1675
1228
1515
1773
1160
1431
1675
545
663
788
545
663
788
-
748
875
605
748
875
-
1115
716
845
1036
667
788
964
667
788
964
1222
1404
1155
1327
1222
1404
1155
1327
841
1038
1214
794
980
1147
841
1038
1214
794
980
1147
OTD
mm
97.0
Recommended
Minimum
mm
inch
inch
1412
29.00/6.0
55.6
(32.00/6.0)
Pattern
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
VSDL
Loader
10
5
E/M
50
30
★
kg
lbs
★
kg
lbs
82500 85000 90000 92500 95000 97500 100000 103000 106000
182000 187500 198000 203500 209000 214500 220500 227000 233500
★2
56000 58000 60000 63000 65000 67000 69000 71000 73000 75000 77500
123500 128000 132500 139000 143500 147500 152000 156500 161000 165500 171000
Loader
10
5
★
kg
lbs
82000 85750 89500 93250 97000 100500 104000 107750 111000 114750 118000
180500 189250 197500 205500 213500 221500 229500 237250 245000 252500 260000
E/M
50
30
★
kg
lbs
★2
67000 69000 71000 75000 77500 80000 82500
147500 152000 156500 165500 171000 176500 182000
★
kg
lbs
★
kg
lbs
★2
80000 82500 87500 90000 92500 95000 100000
176500 182000 193000 198500 204000 209500 220500
★2
77000 79000 84000 86000 89000 91000 96000
169300 174600 185200 190500 195800 201050 211650
1412
55.6
3740
147.2
1410
55.5
1634
64.3
1616
63.6
125.5
-
44.00/6.0
3825
150.6
1283
50.5
1694
66.7
1471
57.9
91.5
1562
61.5
32.00/6.5
34.00/6.5
VELS
VRPS
3840
151.2
1283
50.5
1702
67.0
1471
57.9
107.0
1562
61.5
3952
155.6
1491
58.7
1738
68.4
1755
69.1
118
-
47.00/6.0
VSDL
3741
147.3
1311
51.6
TBA
TBA
TBA
TBA
64.0
1626
64.0
36.00/5.0
3780
148.8
1300
51.2
1630
64.2
1511
59.5
83.5
1626
64.0
3828
150.7
1304
51.3
1657
65.2
1511
59.5
110.0
1626
64.0
3828
150.7
1304
51.3
1657
65.2
1511
59.5
110.0
1626
64.0
4020
158.3
1466
57.7
1710
67.3
1712
67.4
71.0
1780
70.0
44.00/5.0
41.00/5.0
1780
70.0
475
69
★2
45000 47500 48750 51500 53000 54500 56000 58000 60000 61500 63000
99000 104500 107500 113500 117000 120000 123500 128000 132500 135500 139000
97.0
71.0
450
65
★
kg
lbs
1299
51.1
1712
67.4
425
62
E/M
50
30
1586
62.4
1710
67.3
400
58
Size
VRDP
VRPS
1145
45.1
1459
57.4
kPa
psi
3575
140.7
4022
158.3
Application
Max.Speed
km/h
mph
63"
VRF
VRLSA
VRDP
VRPS
46/90R57
★2
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
3575
1145
1586
1299
140.7
45.1
62.4
51.1
55.5/80R57
VRDP
TKPH TMPH
50/90R57
46/90R57
Tubeless
Spec
60/80R57
TRA Code
or
Application
LI/SS
53/80R63
Star
Rating
Pattern
VRD
VRF
VRDP
VRPS
* 44.00/5.0 Rim
* 41.00/5.0 Rim
44.00/5.0
41.00/5.0
4017
158.1
1467
57.8
1710
67.3
1712
67.4
116.0
1780
70.0
59/80R63
Tire Size
44.00/5.0
41.00/5.0
4017
158.1
1467
57.8
1710
67.3
1712
67.4
116.0
1780
70.0
44.00/5.0
41.00/5.0
RADIAL TIRE 45
LI/SS
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Recommended
Minimum
mm
inch
inch
Pattern Application
Star
Inflation
Rating
Pressure
Tire Load Limits at Various Speeds
315
12.4
512
20.2
360
14.2
29.5
380
15.0
★3
Industrial
Service
1139
44.8
297
11.7
507
20.0
355
14.0
41.5
375
14.8
kPa
psi
8.50V
VCH
VCHS
24"
VCH
IDU
★3
IDU
★2
km/h 0 Creep
mph Static Creep
5
3
10
5
15
9
20
12
25
15
30
19
35
22
9000
19800
6500
14300
Load 1000
Wheel 145
Steering 1000
Wheel 145
kg
lbs
kg
lbs
9250
20400
7100
15700
9250
20400
7100
15700
9250
20400
7100
15700
9250
20400
7100
15700
9250
20400
7100
15700
9250
20400
7100
15700
9250
20400
7100
15700
9000
19800
6500
14300
Load
960
Wheel 139
Steering 960
Wheel 139
★3
Load 1000
Wheel 145
Steering 1000
Wheel 145
kg
lbs
kg
lbs
kg
lbs
kg
lbs
12500
27600
10000
22000
18000
39700
14500
32000
10900
24000
8750
19300
16000
35300
12850
28300
10000
22000
8000
17600
14500
32000
11500
25400
9250
20400
7500
16500
13600
30000
10900
24000
9000
19800
7100
15700
12850
28300
10300
22700
8750
19300
6900
15200
12850
28300
10300
22700
8500
18700
6900
15200
12500
27600
10000
22000
12500
27600
10000
22000
★2
Industrial
Service
1254
49.4
323
12.7
558
22.0
376
14.8
29.5
-
8.50V
14.00R24
VHB
★3
383
15.1
390
15.4
383
15.1
630
24.8
610
24.0
626
24.6
410
16.1
460
18.1
445
17.5
450
17.7
480
18.9
480
18.9
10.00W
VHB
VCH
VCHS
IDU
★3
1357
53.4
1393
54.8
1412
55.6
23.5
VCH
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
10.00VA
VCHS
IDU
★3
Load 1000
Wheel 145
Steering 1000
Wheel 145
kg
lbs
kg
lbs
18000
39700
14500
32000
16000
35300
12850
28300
14500
32000
11500
25400
13600
30000
10900
24000
12850
28300
10300
22700
12850
28300
10300
22700
12500
27600
10000
22000
12500
27600
10000
22000
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
1484
58.4
1500
59.1
1531
60.3
1610
63.4
1609
63.3
1650
65.0
1681
66.2
440
17.3
435
17.1
448
17.6
515
20.3
507
20.0
504
19.8
512
20.2
690
27.2
655
25.8
713
28.1
733
28.9
727
28.6
707
27.8
730
28.7
475
18.7
503
19.8
488
17.6
565
22.2
571
22.5
596
23.5
592
23.3
IDU
★2
Load
Wheel
Steering
Wheel
960
139
960
139
kg
lbs
kg
lbs
21800
48100
17500
38600
19500
43000
15500
34200
17500
38600
14000
30900
16500
36400
13200
29100
16000
35300
12500
27600
15500
34200
12500
27600
15000
33100
12150
26800
15000
33100
12150
26800
VHB
VEL
VCHS
IDU
★3
Load 1000
Wheel 145
Steering 1000
Wheel 145
kg
lbs
kg
lbs
30750
68000
25000
55100
27250
60000
21800
48100
24300
53600
19500
43000
23000
50700
18500
40800
22400
49400
17500
38600
21800
48100
17500
38600
21200
46700
17000
37500
21200
46700
17000
37500
VSMS
IDU
★2
960
139
kg
lbs
29000 25750 23000 21800 20600 20600 20000 20000
64000 56800 50700 48100 45400 45400 44100 44100
690
100
kg
lbs
26100 23200 21025 19575 18850 18415 18125 17980
57550 51160 46360 43160 41560 40610 39970 39650
VCHS
196A5
★3
VCHS
196A5
★3
New
25"
16.00R25
Tubeless
18.00R25
Tubeless
VHB
★2
VCHD
★2
VRLS
★2
VHB
★3
VEL
★3
VCHS
23.5R25
Tubeless
33"
18.00R33
Tubeless
35/65R33
Tubeless
214A5
★3
32.0
63.0
22.5
54.0
45.0
26.0
34.0
64.0
513
20.2
523
20.6
540
21.3
587
23.1
612
24.1
600
23.6
612
24.1
11.25/2.0
13.00/2.5
25"
VHB
VCHD
VRLS
VSMS
★2
VSDL
★2
Industrial
Service
1672
65.8
608
23.9
755
29.7
687
27.0
87.0
722
28.4
19.50/2.5
VSDL
IDU
★2
★3
Industrial
Service
Industrial
Service
Industrial
Service
1856
73.1
1860
73.2
2075
81.7
508
20.0
512
20.2
880
34.6
803
31.6
800
31.5
900
35.4
585
23.0
604
23.8
986
38.8
68.5
600
23.6
634
25.0
-
13.00/2.5
33"
VCHS
VELS
IDU
★3
28.00/3.5
VSDL
IDU
VCHS
219A5
VELS
★3
VSDL
★2
84.5
49.0
95.0
Load 1000
Wheel 145
Steering 1000
Wheel 145
★2
780
113
kg 35500
lbs 78500
kg 28000
lbs 61500
kg 50400
lbs 111100
31500
69500
25000
55100
44800
98750
28000
61500
22400
49400
40600
89500
26500
58400
21200
46700
37800
83350
25000
55100
20000
44100
36400
80250
25000
55100
20000
44100
35560
78400
24300
53600
19500
43000
35000
77150
12.00R24
VCH
24300
53600
19500
43000
14.00R24
1140
44.9
14.00R24 TG
Industrial
Service
16.00R25
176A5
★3
12.00R20
Industrial Service
20"
24"
12.00R24
14.00R24 TG
Tubeless
Size
18.00R25
VCHS
TRA Code
or
Application
23.5R25
Industrial Service
20"
12.00R20
VCH
Star
Rating
18.00R33
Pattern
35/65R33
Tire Size
Off-the-Road Tires Used for Industrial Vehicle Applications
1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log stackers etc.,
used on hard improved surfaces, smooth floors and runways.
2) Use Specifications of Industrial Service only.
46
3) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).
4) For Speeds exceeding 30km/h (18mph), consult a Bridgestone Representative.
5) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative.
RADIAL TIRE 47
LI/SS
High-Speed Service
21"
24R21
VGT
Tubeless
Star
Rating
TRA Code
or
Application
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Recommended
Minimum
mm
inch
inch
Pattern Application
★1
High-Speed
Service
1380
54.3
601
23.7
623
24.5
647
25.5
24.5
-
580
85
kg
lbs
7120
15700
170E
VSB
170E
1365
53.7
390
15.4
628
24.7
433
17.0
21.0
450
17.7
★3
High-Speed
Service
1357
53.4
383
15.1
630
24.8
410
16.1
23.5
450
17.7
★3
High-Speed
Service
1356
53.4
384
15.1
626
24.6
422
16.6
23.0
450
17.7
High-Speed
Service
1365
53.7
390
15.4
628
24.7
433
17.0
21.0
450
17.7
kPa
psi
10.00W
VSB
VHB
VHS
HighSpeed
★3*
900
131
km/h 0 Creep
mph Static Creep
kg
lbs
5
3
10
5
15
9
20
12
30
19
40
25
50
31
60
37
70
43
80
50
90
56
100
62
17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
* VSB’s star rating is equivalent to ★3.
170E
170F
★3
High-Speed
Service
1356
53.4
384
15.1
626
24.6
422
16.6
23.0
450
17.7
VSW
170E
★3
High-Speed
Service
1355
53.3
394
15.5
631
24.8
427
16.8
23.5
450
17.7
VKT
177E
★2
High-Speed
Service
1480
58.3
428
16.9
717
28.2
474
18.7
28.5
513
20.2
VHB
177E
★2
High-Speed
Service
1484
58.4
440
17.3
690
27.2
475
18.7
22.5
177E
174F
★2
High-Speed
Service
1484
58.4
435
17.1
684
26.9
480
18.9
VSW
177E
★2
High-Speed
Service
1484
58.4
435
17.1
695
27.4
VGT
170E
★2
High-Speed
Service
1339
52.7
440
17.3
VHB
186E
★2
High-Speed
Service
1590
62.6
VHS
186E
★2
High-Speed
Service
VHS
179E
★2
High-Speed
Service
10.00/1.5
25"
VSB
VHS
VSW
(170E)
HighSpeed
★3*
900
131
kg
lbs
17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
* VSB’s star rating is equivalent to ★3.
VHS
(170F)
HighSpeed
★3
900
131
kg
lbs
15000
33070
HighSpeed
★2
900
131
kg
lbs
21500 17500 15500 13400 12000 10800 9500 9050 8600 8100 7300 6000 5100 4375
47500 38500 34200 29600 26400 23800 20900 20000 19000 18000 16100 13200 11300 9650
513
20.2
VKT
VHB
VHS
VSW
(177E)
25.5
513
20.2
VHS
(174F)
HighSpeed
★3
900
131
kg
lbs
16750
36930
476
18.7
23.0
513
20.2
610
24.0
485
19.1
24.0
-
14.00/1.5
VGT
HighSpeed
★2
700
102
kg
lbs
17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
510
20.1
778
30.6
565
22.2
26.0
587
23.1
13.00/2.5
VHB
VHS
HighSpeed
★2
900
131
kg
lbs
28000 22700 20200 17500 15600 14100 12300 11800 11200 10600 9500 7800 6650 5700
61800 50200 44500 38500 34300 31000 27200 26000 24700 23400 20900 17200 14700 12600
1593
62.7
505
19.9
727
28.6
565
22.2
26.0
587
23.1
1480
58.3
533
21.0
677
26.7
578
22.8
31.0
-
17.00/2.0
VHS
HighSpeed
★2
700
102
kg
lbs
22900 18600 16500 14300 12700 11500 10100 9600 9150 8700 7750 6350 5400 4650
50400 40900 36300 31400 28000 25300 22200 21200 20200 19100 17100 14000 12000 10200
11.25/2.0
12600 10800 9900 9000 7500 6900 6720 6600 6300 8000 5640 5100
27780 23810 21830 19850 16540 15220 14820 14560 13890 13230 12440 11250
14070 12060 11055 10050 8375 7705 7505 7370 7035 6700 6300 5695
31020 26590 24380 22160 18470 16990 16550 16250 15510 14780 13890 12560
385/95R24 (14.00R24)
VHS
High-Speed
Service
385/95R25 (14.00R25)
170E
New
48
88
55
445/95R25 (16.00R25)
VHB
VHS
525/80R25
(20.5R25)
Tubeless
km/h
mph
445/80R25
170E
New
445/80R25
(17.5R25)
Tubeless
505/95R25
(18.00R25)
Tubeless
★1
kPa
psi
24"
VSB
VHS
445/95R25
(16.00R25)
Tubeless
Size
*Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).
18.00/1.5
HighSpeed
505/95R25 (18.00R25) (17.5R25)
25"
385/95R25
(14.00R25)
Tubeless
Inflation
Pressure
High-Speed Service
21"
VGT
24"
385/95R24
(14.00R24)
Star
Rating
24R21
Pattern
525/80R25
(20.5R25)
Tire Size
RADIAL TIRE 49
25"
21.00R25
Tubeless
50
LI/SS
Star
Rating
TRA Code
or
Application
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Recommended
Minimum
mm
inch
inch
Pattern Application
Ply
Sand Service
20"
VSJ
VSJ
28
E7
E7
1315
51.8
1728
68.0
414
16.3
584
23.0
590
23.2
784
30.9
475
18.7
649
25.6
18.5
22.5
520
20.5
685
27.0
Max.
kg
lbs
VSJ
Sand
25"
VSJ
Sand
Size
*It is Recommended that 90% of the below indicated loads per tire is to be applied when used on a dual axle.
10.00W
15.00/3.0
Tire Cold Inflation Pressures at Various Load Limits
Rating Speed
28PR 65km/h
40mph
50km/h
30mph
16km/h
10mph
-
65km/h
40mph
50km/h
30mph
16km/h
10mph
kPa
psi
kPa
psi
kPa
psi
kPa
psi
kPa
psi
kPa
psi
4250 4500 4750 5000 5250 5500 6000 7000 8000 8500 9000 9500
9370 9920 10470 11020 11570 12130 13230 15430 17640 18740 19840 20940
490
71
390
57
280
41
540
78
420
61
300
44
580
84
450
65
320
47
630
91
490
71
350
51
680
98
720
105
16.00R20
Sand Service
20"
16.00R20
Pattern
330
48
260
38
200
28
410
60
320
47
230
34
490
71
390
57
280
41
540
78
420
61
300
44
590
85
630
92
21.00R25
Tire Size
RADIAL TIRE 51
4.3 Load-and-Carry Operations for Front End Loader Service
4. Remarks
4.1 Excess Load
Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those in the appropriate above-listed
load tables are often encountered.
These excess loads result from items such as actual vehicle weight exceeding the design weight, varying density of
materials, field modifications to the equipment, load transfer, etc.
Only under these conditions, the actual tire load in service may exceed the above load ratings for the tire(*) by an
amount not greater than shown in the following table:
E2, E3, E4*
L**
Maximum Excess Load
7%
7%
Maximum Excess Pressure
14%
14%
800kPa
825kPa
116psi
120psi
Maximum Pressure
Service conditions of a loader is defined as “picking up material and relocating a short distance away, a maximum of
76m (250 feet), one way, with a maximum speed of 10km/h (5mph)”. However, a loader can pick up a load and
transport such load to another location and return unloaded for a longer distance. This type of service is called Loadand-Carry operations. Transportation usually occurs at low speeds, up to 25km/h (15mph), and distances are
limited.
The tires when used in Load-and-Carry operations may encounter heat problems especially on the front axle tires.
To avoid such problems, Bridgestone recommends the following operating conditions.
For tires over 33" inch rim diameter tires, careful study is required to maximize tire life while considering TonKilometer-Per-Hour (Ton-Mile-Per-Hour) limits. Please consult Bridgestone representative for more information.
If you need to use the tire beyond this recommendation, please consult Bridgestone representative.
For Radial Tires
When excess loads are encountered, cold inflation pressures must be increased to compensate for higher loads.
For each 1% increase in load, the inflation pressure must be increased by 2%.
*except following sizes on the list
11.00R20
12.00R20
335/80R20
365/80R20
405/70R20
12R22.5
12.00R24
Inflation Pressure
Rim Diameter
Tread
Class
**except 55.5/80R57 and 60/80R57
29" and below
Conventional size
(95 series)
★
L2, L3
L4
The maximum excess loads will result in reduced tire performance.
L5
L5S
★★
Wide base size
(85, 65 series)
★
★★
33" and above
Load Capacity*
Wide base size
(65 series)
10km/h (5mph)
★
Maximum Cycle
Distance
(m)
Allowable Average
Work-shift Speed
(km/h)
★★
1800
550kpa 825kpa 500kpa 650kpa 600kpa 750kpa
(80psi) (120psi) (73psi) (94psi) (87psi) (109psi)
100% of
STD.load
1500 (VSDT)
1200 (VSDL)
1200
16
14
10
6
5
* STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating.
4.2 The Variation in Load Carrying Capacity with Operating Speed
Operating Speed
(km/h)
E2, E3
E4
G
Static
L**
+60%
Creep
+30%
*
4
+15%
10
52
Please refer to the load - inflation pressure table for loader and dozer service “10km/h (5mph) service” .
0
15
+12%
20
+10%
-
-13%
-
25
+8%
-20%
30
+6%
35
+4%
40
+3%
45
+2%
-
50
0
-9%
55
-2%
-
60
-6%
-18%
65
-12%
-27%
0
70
-20%*
*
75
-30%*
*
80
-42%*
*
80<
*
*
Reference speed for calculating load variance
* Consult a Bridgestone Representative
** About the size of 55.5/80R57 and 60/80R57,
consult a Bridgestone representative.
RADIAL TIRE 53
BIAS TIRE
1. Tread Designs
■ Earthmover Service
E3
W-LUG
(WL)
R-LUG
(RL)
■ Sand Service
L4
E4
V-LUG2
(VL2)
R-LUG S
(RLS)
E-LUG S2
(ELS2)
■ Grader Service
E7
RIB GRADER
(RG)
G2
G-LUG
(GL)
FAST GRIP
(FG)
■ Loader & Dozer Service
G3
R-LUG
(RL)
54
L5S
D-LUG
(DL)
SMOOTH TREAD-MS
(STMS)
■ Logging Service
C1
C2
ROAD ROLLER
(RR)
ALLIGATOR2
(AL2)
LS2
TIMBER GRIP S
(TGS)
■ Industrial Service
L2
G-LUG
(GL)
N-LUG
(NL)
■ Compactor Service
G1
SAND CLIPPER-2
(SCP2)
R-LUG S
(RLS)
L5
L3
FAST GRIP
(FG)
R-LUG
(RL)
V-LUG2
(VL2)
R-LUG
(RL)
R-LUG S
(RLS)
E-LUG S2
(ELS2)
SMOOTH TREAD-MS
(STMS)
YARD SERVICE-2
(YS2)
BIAS TIRE 55
2. Application
■ Earthmover Service
■Grader Service
HEAT RESISTANT
GL
CUT RESISTANT
TRACTION
CUT RESISTANT
TRACTION
HEAT RESISTANT
FG
RG
ROCK
VL2
RLS
RL
RL
ROCK
WL
ELS2
Size
Type
Ply Rating
WL(E3)
9.00-20
18.00-25
37.25-35
Type
Size
Ply Rating
RLS(E4)
T/T
14
RL(E3)
10.00-20
11.00-20
12.00-20
12.00-24
14.00-24
16.00-25
Size
T/T
T/T
T/T
T/T
T/T
T/L
T/T
T/L
T/L
14
14
18
20
20 24 28
28
28
32
36
T/L
T/L
T/L
T/L
16 20 24
16 20 24
20 24 26
22 28
18.00-33
21.00-35
T/L
T/L
32 36
36
T/T
T/L
32
32
9.00-20
9.00-20
10
T/T
14
T/L
T/T
T/L
T/T
T/T
T/L
T/L
T/T
12
10
14
12 16
16
12 16
12
12
T/T
16
FG(G2)
13.00-24 TG
14.00-24 TG
16.00-24 TG
17.5-25
20.5-25
RL(G3)
16.00-24 TG
T/T: Tube Type
T/L: Tubeless Type
56
T/T
GL(G2)
VL2(E3)
20.5-25
23.5-25
26.5-25
29.5-25
Ply Rating
RG(G1)
ELS2(E4)
18.00-25
18.00-33
Type
T/T: Tube Type
T/L: Tubeless Type
BIAS TIRE 57
■Loader & Dozer Service
HEAT RESISTANT
CUT RESISTANT
FGF
NL
VL2
RL
Size
Type
Ply Rating
GL(L2)
9.00-20
33x12.5-15
12.5/70-16
10-16.5
12-16.5
12.5/65-18
15.5/60-18
15.5/70-18
10.00-20
11.00-20
15.5/70-20
42x17-20
17.5/65-20
Type
Ply Rating
T/T
14
T/L
T/T
T/L
T/T
T/T
T/L
T/L
T/L
T/T
T/L
T/L
T/L
T/T
T/T
T/L
T/T
T/L
4
4
4
4
8
68
68
8
8
8
8
8
10 12 14
10 12 16
10
10
10
13.00-24 TG
14.00-24 TG
16.9-24
18.4-24
15.5-25
17.5-25
20.5-25
T/L
T/T
T/L
T/T
T/T
T/T
T/L
T/T
T/L
T/L
T/T
12
12
12 14
12
10
10
12
12
12 16
12
12
Size
Type
Ply Rating
T/T
16
12.00-24
14.00-24
14.00-24 TG
16.00-24 TG
T/T
T/T
T/L
T/T
Size
16 20
24
12
16
15.5-25
17.5-25
20.5-25
23.5-25
26.5-25
29.5-25
Type
Ply Rating
T/L
T/L
T/T
T/L
T/T
T/L
T/T
T/L
T/T
T/L
12
16
16
16 20 24
16 20
16 20 24
16 20 24
16 20 24 26
20 24
22 28
RLS(L4)
14.00-24
18.00-25
23.5-25
26.5-25
29.5-25
T/T: Tube Type
T/L: Tubeless Type
58
STMS
VL2(L3)
FGF(L2)
10.00-20
DL
RLS
RL(L3)
FG(L2) (continued)
FG(L2)
5.70-12
23x8.50-12
27x8.50-15
Size
ROCK
FG
ROCK
GL
TRACTION
CUT RESISTANT
TRACTION
HEAT RESISTANT
T/T
T/T
T/L
T/L
T/L
20
32
16
26 32
28
Size
NL(L4)
35/65-33
Type
Ply Rating
T/L
24 30
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
16
12 16
20
20 32
28
24 30 42
56
42
38 58
62
62
Type
Ply Rating
T/T
T/T
T/L
T/L
T/L
T/L
16 20
20
20
24 28 32
32 36
34
STMS(L5S)
DL(L5)
17.5-25
20.5-25
23.5-25
26.5-25
29.5-25
35/65-33
40/65-39
41.25/70-39
45/65-45
50/65-51
65/65-57
Size
12.00-24
14.00-24
17.5-25
18.00-25
26.5-25
29.5-29
T/T: Tube Type
T/L: Tubeless Type
BIAS TIRE 59
■Compactor Service
Size
Type
■Industrial Service
Ply Rating
RR
10.5/80-16
9.00-20
14/70-20
Type
Ply Rating
12.00-20
14.00-24
14.00-24 TG
16.00-25
T/T
T/T
T/L
T/L
T/T
T/L
T/L
T/L
20
24 28
24
28 32
28
36 40
40
40
T/L
T/L
T/L
24
28 32
36
T/L
T/L
T/L
40
36
40
T/T
T/L
20
40
T/L
28 32
RL
RR(C1)
7.50-15
9.5/65-15
7.50-16
Size
T/T
T/T
T/L
T/T
T/L
T/T
T/T
12
6
6
6
6
10
12
T/L
T/T
8
8
RL
18.00-25
21.00-25
21.00-35
AL2(C2)
23.1-26
RLS
14.00-24 TG
16.00-25
23.5-25
AL2
RLS
ELS2
18.00-25
18.00-33
21.00-35
■Logging Service
ELS2
TGS(LS2)
30.5L-32
T/T
16
STMS
12.00-24
18.00-25
TGS
STMS
YS2
16.00-25
■Sand Service
YS2
SCP2(E7)
14.00-20
T/T
18
SCP2
T/T: Tube Type
T/L: Tubeless Type
60
T/T: Tube Type
T/L: Tubeless Type
BIAS TIRE 61
3. Technical Data
Ply
Rating
TRA Code
or
Application
Spec
L2
-
TKPH TMPH
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
-
5JA
Pattern
inch
-
570
22.4
153
6.0
TBA*
TBA*
TBA*
TBA*
15.5
FG
4
L2
-
-
-
576
22.7
215
8.5
TBA*
TBA*
TBA*
TBA*
14.5
775
30.5
209
8.2
360
14.2
225
8.9
-
-
5JA
250
9.8
6.00GS
FG
220
32
240
35
260
38
280
41
300
44
325
47
350
51
PR
kg
lbs
PR
kg
lbs
4
445 470 495 520 545 565 590 620
980 1035 1090 1145 1200 1245 1300 1365
4
550 585 620 655 685
1210 1290 1365 1445 1510
kPa
psi
350
51
420
925
FG
4
L2
-
-
-
686
27.0
208
8.2
317
12.5
218
8.6
16.5
-
7JA
RR
6
C1
-
-
-
671
26.4
238
9.4
312
12.3
242
9.5
-
-
7JA
33x12.5-15
FG
8
L2
-
-
-
851
33.5
318
12.5
385
15.2
336
13.2
22.5
-
10.00F
RR
FG
RR
6
C1
-
-
-
7.50-16
814
32.0
230
9.1
380
15.0
238
9.4
776
30.6
214
8.4
TBA*
TBA*
TBA*
TBA*
-
250
9.8
6.00GS
6LB
16"
RR
10.5/80-16
Tubeless
RR
6
C1
-
-
-
807
31.8
272
10.7
TBA*
TBA*
TBA*
TBA*
-
-
8LB
RR
12.5/70-16
Tubeless
FG
6
8
L2
-
-
-
860
33.9
319
12.6
389
15.3
336
13.2
21.0
-
10LB
FG
FG
6
8
L2
-
-
-
771
30.4
268
10.6
353
13.9
278
10.9
19.5
-
8.25
16.5"
FG
FG
8
L2
-
-
-
831
32.7
315
12.4
376
14.8
325
12.8
20.0
-
9.75
FG
Compactor PR
10
kg
5
lbs
kPa
psi
Loader
PR
10
kg
5
lbs
Compactor PR
10
kg
5
lbs
kPa
psi
Loader
PR
10
kg
5
lbs
375
54
400
58
425
62
450
65
475
69
Loader
10
5
Loader
10
5
PR
kg
lbs
PR
kg
lbs
525
76
550
80
575
84
600
87
625
91
650
94
675
98
700
102
725
105
750
109
12
1700 1750 1850 1900 1950 2060 2120 2180 2240 2300 2300 2360 2430 2500 2575 2575 2650
3740 3860 4080 4180 4300 4540 4680 4800 4940 5080 5080 5200 5360 5520 5680 5680 5840
180
26
200
29
220
32
240
35
260
38
280
41
300
44
325
47
4
695 740 780 820 860
1530 1630 1720 1805 1895
6
1100 1155 1205 1255 1315
2430 2550 2560 2770 2900
120
17
140
20
160
23
180
26
200
29
220
32
240
35
260
38
280
41
300
44
325
47
350
51
375
54
400
58
425
62
8
1510 1605 1695 1785 1870 1950 2035 2130
3330 3540 3735 3935 4125 4300 4485 4695
C1
PR
Compactor
kg
10
lbs
5
PR
kg
lbs
PR
kg
lbs
500
73
6
1405 1470 1535 1600 1675 1750 1820 1890
3100 3240 3380 3530 3690 3860 4010 4170
6
1645 1725 1800 1875
3630 3800 3970 4130
6
8
1050 1145 1240 1330 1410 1495 1570 1645
2315 2525 2735 2930 3110 3295 3460 3625
6
8
1140 1215 1285 1350 1415 1475 1540 1610 1685 1750 1820
2515 2680 2830 2975 3120 3250 3395 3550 3715 3860 4010
8
1470 1565 1655 1740 1820 1905 1980 2075 2170
3240 3450 3650 3835 4010 4200 4365 4575 4785
12-16.5
*Due to factory transfer.
For the TKPH(TMPH) Ratings of Bias Tires
62
7.50-15
-
27x8.50-15
-
9.5/65-15
-
33x12.5-15
C1
9.5/65-15
12-16.5
Tubeless
200
29
7.50-16
12
FG
16.5"
10-16.5
Tubeless
180
26
15"
RR
27x8.50-15
16"
7.50-16
Tubeless
Loader
10
5
Loader
10
5
kPa
psi
5.70-12
-
23x8.50-12
4
RR
27x8.50-15
Tubeless
Size
12.5/70-16 10.5/80-16
15"
7.50-15
12"
FG
FG
23x8.50-12
Application
Max.Speed
km/h
mph
10-16.5
12"
5.70-12
Tubeless
Pattern
12-16.5
Tire Size
For the Load and Inflation Pressure Tables of Bias Tires
1) Maximum Speeds are as below. Earthmover Service : 50km/h (30mph), Grader Service : 40km/h (25mph), Loader & Dozer Service : 10km/h (5mph),
Compactor Service : 10km/h (5mph)
2) Figures under the ply rating denote the maximun load and inflation pressures.
BIAS TIRE 63
Ply
Rating
TRA Code
or
Application
Spec
L2
-
TKPH TMPH
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
-
W10
Pattern
inch
878
34.6
315
12.4
398
15.7
327
12.9
19.5
8
L2
-
-
-
932
36.7
391
15.4
416
16.4
404
15.9
21.5
-
W10
FG
15.5/70-18
Tubeless
FG
8
L2
-
-
-
1035
40.7
405
15.9
TBA*
TBA*
TBA*
TBA*
20.5
-
W13
FG
RG
10
G1
-
-
-
1023
40.3
267
10.5
TBA*
TBA*
TBA*
TBA*
15.0
-
7.00T
20"
RG
GL
RR
10
C1
-
-
-
1005
39.6
265
10.4
458
18.0
297
11.7
-
310
12.2
RR
GL
14
G2,L2
-
-
-
1023
40.3
255
10.0
478
18.8
276
10.9
21.0
-
WL
14
E3
SCR
-
-
1027
40.4
257
10.1
466
18.3
280
11.0
19.5
310
12.2
GL
WL
FG
FGF
10
12
14
16
L2
-
-
-
1064
41.9
280
11.1
495
19.5
295
11.6
24.0
-
L2
-
-
-
1057
41.6
276
10.9
478
18.8
302
11.9
18.0
334
13.1
RL
14
E3
CRT
42
29
1067
42.0
285
11.2
489
19.3
304
12.0
22.5
-
FG
10
12
16
L2
-
-
-
1100
43.3
299
11.8
510
20.0
323
12.7
24.5
352
13.9
14
E3
RL
49
34
1090
42.9
296
11.7
TBA*
TBA*
TBA*
TBA*
24.0
FG
FGF
RL
Loader
10
5
PR
kg
lbs
PR
kg
lbs
PR
kg
lbs
8
1065 1165 1260 1350 1435 1515 1595 1670
2345 2570 2775 2975 3165 3340 3515 3680
8
1525 1670 1805 1935 2060 2195
3360 3680 3980 4265 4540 4840
8
1725 1885 2040 2185 2325 2455
3800 4155 4495 4815 5125 5410
Grader
40
25
PR
kg
lbs
Compactor
10
5
Loader
10
5
E/M
50
30
Loader
10
5
E/M
50
30
8.00V
Loader
10
5
344
13.5
RL
64
120
17
7.50V
FG
CRT
kPa
psi
E/M
50
30
140
20
160
23
180
26
200
29
220
32
240
35
260
38
280
41
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
12.5/65-18
-
15.5/70-18 15.5/60-18
-
FG
11.00-20
Size
10
14
955 1035 1110 1180 1245 1310 1375 1435 1495 1565 1635 1705 1780 1850 1910 1965 2025
2110 2280 2450 2600 2740 2890 3040 3160 3300 3460 3600 3760 3920 4060 4210 4340 4480
kPa
psi
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
PR
kg
lbs
PR
kg
lbs
10
2900 3000 3150 3250 3350 3450 3550 3650
6400 6600 6950 7150 7400 7600 7850 8050
kPa
psi
200
29
PR
kg
lbs
14
1280 1350 1420 1490 1555 1620 1695 1770 1845 1915 1985 2055 2120 2185 2245 2310
2820 2980 3130 3280 3430 3570 3740 3900 4070 4220 4380 4530 4670 4820 4950 5090
kPa
psi
475
69
PR
kg
lbs
10
12
14
16
3550 3650 3750 3875 4000 4125 4125 4250 4345 4440 4530 4620
7850 8050 8250 8550 8800 9100 9100 9350 9580 9790 9990 10180
kPa
psi
200
29
PR
kg
lbs
14
1445 1530 1610 1685 1760 1830 1920 2005 2085 2170 2245 2320 2395 2470
3190 3370 3550 3710 3880 4030 4230 4420 4600 4780 4950 5110 5280 5450
kPa
psi
450
65
PR
kg
lbs
10
12
16
3750 3875 4000 4125 4250 4250 4375 4500 4675 4780 4880
8300 8550 8800 9100 9350 9350 9650 9900 10300 10540 10740
kPa
psi
200
29
PR
kg
lbs
14
16
1570 1660 1750 1830 1910 1990 2085 2180 2270 2355 2440 2525 2605 2685 2760 2840
3460 3660 3860 4030 4210 4390 4600 4810 5000 5190 5380 5570 5740 5920 6080 6260
9.00-20
8
15.5/60-18
Tubeless
10.00-20
18"
FG
FG
20"
9.00-20
Application
Max.Speed
km/h
mph
14
3150 3250 3350 3450 3450 3550 3630 3710 3790 3875
6950 7150 7400 7600 7600 7850 8000 8190 8360 8550
220
32
500
73
220
32
475
69
220
32
240
35
525
76
240
35
500
73
240
35
260
38
550
80
260
38
525
76
260
38
280
41
575
83
280
41
550
80
280
41
300
44
600
87
300
44
575
83
300
44
325
47
625
91
325
47
600
87
325
47
350
51
650
94
350
51
625
91
350
51
375
54
675
98
375
54
650
94
375
54
400
58
700
102
400
58
675
98
400
58
425
62
725
105
425
62
450
65
475
69
500
73
525
76
550
80
750
109
450
65
475
69
10.00-20
18"
12.5/65-18
Tubeless
Pattern
500
73
700
102
425
62
450
65
475
69
500
73
525
76
550
80
11.00-20
Tire Size
BIAS TIRE 65
18
E3
SCR
52
36
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1138
316
513
331
44.8
12.4
20.2
13.0
OTD
mm
25.5
Minimum
Dual Spacing
mm
inch
382
15.0
Recommended
Rim/Flange Height
Pattern
inch
8.50V
RL
20
14.00-20
SCP2
18
Industrial
Service
IDU
E7
-
-
RL
-
Application
Max.Speed
km/h
mph
E/M
50
30
IDU
kPa
psi
275
40
300
44
325
47
350
51
375
54
400
58
PR
kg
lbs
18
2180 2300 2430 2500 2650 2725 2800 2900 3000 3075
4800 5080 5360 5520 5840 6000 6150 6400 6600 6800
SCP2
-
RR
12
C1
-
-
-
970
38.2
380
15.0
448
17.6
392
15.4
-
FG
42x17-20
FG
17.5/65-20
Tubeless
24"
12.00-24
FG
10
10
10
L2
L2
L2
-
-
-
-
-
-
-
-
-
1072
42.2
410
16.1
TBA*
TBA*
TBA*
TBA*
21.5
1077
42.4
431
17.0
TBA*
TBA*
TBA*
TBA*
25.5
1107
43.6
450
17.7
TBA*
TBA*
TBA*
TBA*
25.0
1232
48.5
318
12.5
TBA*
TBA*
TBA*
TBA*
24.5
1232
48.5
318
12.5
560
22.0
351
13.8
1275
50.2
321
12.6
606
23.9
339
13.3
-
kPa
psi
11.00TG
-
W13
-
14.00TG
-
W14L
-
8.5
8.50V
FG
FG
FG
20
E3
L3
DE2
66
-
45
-
RL
STMS
16
20
D2A
L5S
D2A
-
-
391
15.4
55.0
-
FG
Industrial
Service
IDU
-
12
G2
L2
DG2
-
-
10
12
G2
L2
G2A
D2A
-
-
STMS
-
PR
kg
lbs
PR
kg
lbs
PR
kg
lbs
PR
kg
lbs
140
20
160
23
180
26
200
29
220
32
240
35
260
38
280
41
300
44
325
47
350
51
375
54
400
58
425
62
450
65
2130 2330 2520 2700
4695 5135 5555 5950
12
2775 2905 3035 3160 3310 3460 3600 3740 3875 4005
6100 6400 6700 6950 7300 7650 7950 8250 8550 8850
10
2475 2620 2755 2890
5455 5775 6075 6370
10
2915 3080 3240 3395 3545 3690
6425 6790 7140 7485 7815 8135
10
2875 3040 3195
6340 6700 7045
kPa
psi
275
40
375
54
PR
kg
lbs
16
20
2500 2575 2725 2800 3000 3075 3150 3250 3350 3450 3550 3650
5520 5680 6000 6150 6600 6800 6950 7150 7400 7600 7850 8050
kPa
psi
475
69
1835 2010 2175 2330
4045 4430 4795 5135
2740
6040
Loader
10
5
IDU
300
44
500
73
325
47
525
76
350
51
550
80
575
83
400
58
600
87
1286
50.6
340
13.4
588
23.1
374
14.7
28.0
425
62
625
91
450
65
650
94
475
69
675
98
500
73
700
102
525
76
725
105
550
80
750
109
775
112
800
115
825
120
PR
16
20
kg
5000 5150 5300 5450 5600 5600 5800 6000 6150 6270 6410 6540 6660 6780 6900
lbs 11000 11400 11700 12000 12300 12300 12800 13200 13600 13790 14100 14390 14700 14900 15200
-
8.00TG
(10.00VA)
FG
13.00-24 TG
E/M
50
30
8.5
8.50V
RL
STMS
FG
66
Compactor
10
5
Loader
10
5
Loader
10
5
Loader
10
5
120
17
24"
RL
16
13.00-24 TG
Tubeless
500
73
RR
15.5/70-20
Tubeless
475
69
Sand
14/70-20
450
65
-
425
62
Size
12.00-20
RL
TKPH TMPH
14.00-20
Spec
14/70-20
TRA Code
or
Application
17.5/65-20 42x17-20 15.5/70-20
Ply
Rating
12.00-24
12.00-20
Pattern
Grader
40
25
Loader
10
5
kPa
psi
125
18
150
22
175
25
200
29
225
33
250
36
275
40
300
44
PR
kg
lbs
PR
kg
lbs
10
12
1700 1900 2060 2240 2360 2500 2650 2725
3740 4180 4540 4940 5200 5520 5840 6000
325
47
350
51
375
54
400
58
425
62
450
65
12
4500 4750 5000 5150 5300 5600
9900 10500 11000 11400 11700 12300
13.00-24 TG
Tire Size
BIAS TIRE 67
14.00-24
Pattern
RL
RLS
STMS
TRA Code
or
Application
Spec
E3
E2A
109
75
D2A
IDU
-
-
28
L3
Industrial
Service
20
L4
D2A
Ply
Rating
20 28
24
20
L5S
TKPH TMPH
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1355
387
627
400
53.3
15.2
24.7
15.7
OTD
mm
28.0
Minimum
Dual Spacing
mm
inch
450
17.7
Recommended
Rim/Flange Height
Pattern
inch
10.00W
RL
D2A
-
-
-
-
1407
55.4
390
15.4
646
25.4
440
17.3
48.0
1373
54.1
367
14.4
646
25.4
391
15.4
78.0
450
17.7
Application
Max.Speed
km/h
mph
E/M
50
30
10.00W
RL
RLS
STMS
RL
-
Loader
10
5
IDU
300
44
kPa
psi
275
40
PR
kg
lbs
20
24
28
3350 3550 3750 3875 4000 4250 4375 4500 4625 4750 4875 5000 5150 5300 5450 5600
7400 7850 8250 8550 8800 9350 9650 9900 10200 10500 10700 11000 11400 11700 12000 12300
kPa
psi
425
62
450
65
325
47
475
69
350
51
500
73
375
54
525
76
400
58
550
80
425
62
575
83
450
65
600
87
475
69
625
91
500
73
650
94
525
76
675
98
550
80
Size
700
102
575
83
725
105
600
87
750
109
625
91
775
112
650
94
800
115
825
120
850
124
PR
12
16
20
24
kg
6300 6500 6700 6900 7100 7300 7500 7750 8000 8250 8250 8500 8670 8830 9000 9170 9330 9500
lbs 13900 14300 14800 15200 15700 16100 16500 17100 17600 18200 18200 18700 19100 19500 19800 20200 20600 21000
14.00-24
Tire Size
-
-
1336
52.6
375
14.8
606
23.9
374
14.7
L2
D2A
-
-
1330
52.3
390
15.4
TBA
TBA
TBA
TBA
12
L3
D2A
D2V
-
-
1355
53.3
387
15.2
614
24.2
410
16.1
24
Industrial
Service
IDU
-
-
RLS
24
Industrial
Service
IDU
-
-
FG
12
G2
G2A
-
-
12
RL
14.00-24 TG
16.00-24 TG
16.9-24
D2A
FG
16
G2
G2A
-
RL
16
G3, L3
DG2
FG
10
L2
-
8.00TG
(10.00VA)
450
17.7
10.00VA
(8.00TG)
12
14
16
2060 2300 2500 2650 2800 3075 3250 3450 3550 3650
4540 5080 5520 5840 6150 6800 7150 7600 7850 8050
Grader
40
25
PR
kg
lbs
FG
RL
Loader
10
5
IDU
PR
kg
lbs
1336
52.6
375
14.8
606
23.9
400
15.7
31.0
-
150
22
175
25
200
29
225
33
250
36
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
430
16.9
550
80
12
16
6300 6500 6700 6900 7100 7300
13900 14300 14800 15200 15700 16100
8.00TG
(10.00VA)
10.00VA
(8.00TG)
1330
52.3
390
15.4
TBA
TBA
TBA
TBA
-
1453
57.2
438
17.2
638
25.1
500
19.7
32.5
-
-
-
1478
58.2
419
16.5
671
26.4
446
17.6
33.5
513
20.2
-
-
1320
52.0
447
17.6
591
23.3
462
18.2
30.5
-
10.00VA
FG
RL
RL
Grader
40
25
Loader
10
5
W15L
FG
68
125
18
FG
10.00VA
28.0
kPa
psi
395
15.6
L2
-
RL
RLS
16
12
31.0
14.00-24 TG
G2A
18.4-24
FG
10
L2
-
-
-
1385
54.5
483
19.0
612
24.1
516
20.3
32.5
-
W16L
25"
15.5-25
Tubeless
FG
12
L2
D2A
-
-
1284
50.6
410
15.7
565
22.2
399
15.7
23.5
-
12.00/1.3
VL2
12
L3
D2A
-
-
1284
50.6
410
15.6
568
22.4
448
17.6
27.0
-
FG
Loader
L2
10
5
L2
PR
kg
lbs
PR
kg
lbs
16
2650 3000 3250 3450 3650 4000 4250 4500
5840 6600 7150 7600 8050 8800 9350 9900
kPa
psi
120
17
PR
kg
lbs
PR
kg
lbs
10
2300 2520 2725 2920 3105 3280 3455
5070 5555 6005 6435 6845 7230 7615
10
2765 3025 3270 3505 3725 3940
6095 6670 7210 7725 8210 8685
kPa
psi
225
33
PR
kg
lbs
12
4000 4250 4500 4750 4875 5150 5300 5600
8800 9350 9900 10500 10700 11400 11700 12300
16
7100 7300 7750 8000 8250
15700 16100 17100 17600 18200
140
20
160
23
180
26
200
29
220
32
240
35
16.00-24 TG
G2
16.9-24
14
18.4-24
FG
25"
FG
VL2
Loader
10
5
250
36
275
40
300
44
325
47
350
51
375
54
400
58
15.5-25
14.00-24 TG
Tubeless
BIAS TIRE 69
Spec
FG
12
L2
D2A
TKPH TMPH
-
-
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1284
410
565
399
50.6
15.7
22.2
15.7
OTD
mm
23.5
Minimum
Dual Spacing
mm
inch
-
Recommended
Rim/Flange Height
Pattern
inch
12.00/1.3
FG
16.00-25
Tubeless
16.00-25
17.5-25
Tubeless
RL
28
E3
E2A
139
95
28
32
Industrial
Service
IDU
-
-
RLS
28
32
Industrial
Service
IDU
-
-
YS2
28
32
Industrial
Service
IDU
-
-
28
E3
E2A
139
95
28
Industrial
Service
IDU
-
-
RL
1478
58.2
432
17.0
671
26.4
459
18.1
33.5
513
20.2
11.25/2.0
RL
RL
RLS
YS2
Loader
10
5
E/M
50
30
IDU
kPa
psi
225
33
250
36
275
40
300
44
325
47
350
51
375
54
400
58
PR
kg
lbs
PR
kg
lbs
12
4000 4250 4500 4750 4875 5150 5300 5600
8800 9350 9900 10500 10700 11400 11700 12300
425
62
450
65
475
69
500
73
Size
525
76
550
80
575
83
28
4375 4625 4875 5000 5300 5450 5600 5800 6000 6300 6500 6500 6700
9650 10200 10700 11000 11700 12000 12300 12800 13200 13900 14300 14300 14800
1495
58.9
432
17.0
671
26.4
459
18.1
33.5
513
20.2
11.25/2.0
FG
12
16
G2, L2
DG2
-
-
1345
53.0
450
17.7
596
23.5
472
18.6
27.5
-
VL2
16
L3
D2A
-
-
1348
53.1
444
17.5
597
23.5
470
18.5
30.5
-
DL
16
L5
D2A
-
-
1410
55.5
445
17.5
656
25.8
470
18.5
69.5
-
STMS
20
L5S
D2A
D2Z
-
-
1385
54.5
450
17.7
645
25.4
462
18.2
69.0
-
14.00/1.5
FG
70
Application
Max.Speed
km/h
mph
15.5-25
TRA Code
or
Application
16.00-25
Ply
Rating
17.5-25
VL2
16
L3
D2A
-
-
1348
53.1
444
17.5
597
23.5
470
18.5
30.5
-
18.00-25
Tubeless
RL
32
E3
E2A
173
118
1602
63.1
503
19.8
727
28.6
572
22.5
37.5
587
23.1
36
40
Industrial
Service
IDU
-
-
ELS2
40
Industrial
Service
IDU
-
-
STMS
24
28
32
40
L5S
D2A
-
-
Industrial
Service
IDU
-
-
Grader
40
25
kPa
psi
125
18
PR
kg
lbs
12
16
2120 2360 2575 2900 3000 3150 3350
4680 5200 5680 6400 6600 6950 7400
kPa
psi
13.00/2.5
FG
VL2
DL
STMS
Loader
10
5
RL
E/M
50
30
STMS
520
20.5
762
30.0
550
21.7
84.0
-
175
25
200
29
225
33
250
36
275
40
13.00/2.5
RL
ELS2
STMS
Loader
10
5
IDU
225
33
250
36
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
PR
12
16
20
kg
4750 5000 5300 5600 5800 6150 6300 6700 6900 7100 7300 7500 7750 8000 8250
lbs 10500 11000 11700 12300 12800 13600 13900 14800 15200 15700 16100 16500 17100 17600 18200
PR
kg
lbs
kPa
psi
1675
65.9
150
22
17.5-25
15.5-25
Pattern
32
5600 6000 6300 6500 6900 7100 7300 7500 7750 8000 8250 8500 8750
12300 13200 13900 14300 15200 15700 16100 16500 17100 17600 18200 18700 19300
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
725
105
750
109
PR
24
28
32
kg 10000 10450 10900 11500 11500 11800 12150 12500 12850 13200 13600 13600 14000 14500 14500 15000
lbs 22000 23000 24000 25400 25400 26000 26800 27600 28300 29100 30000 30000 30900 32000 32000 33100
18.00-25
Tire Size
BIAS TIRE 71
Spec
RLS
32
L4
D2A
-
-
ELS2
32
E4
E2ALS
139
95
TKPH TMPH
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1642
515
745
578
64.6
20.3
29.3
22.8
OTD
mm
57.5
Minimum
Dual Spacing
mm
inch
587
23.1
Recommended
Rim/Flange Height
Pattern
inch
13.00/2.5
530
20.9
796
31.3
545
21.5
66.5
kPa
psi
ELS2
1685
66.3
Application
Max.Speed
km/h
mph
587
23.1
E/M
50
30
20.5-25
Tubeless
FG
12
VL2
16
20
24
12
16
DL
20.5-25
DG2
-
-
1493
58.8
534
21.0
652
25.7
551
21.7
29.5
-
E3
L3
DE2
80
-
55
-
1494
58.8
542
21.3
641
25.2
587
23.1
33.0
-
L5
D2A
-
-
1558
61.3
548
21.6
714
28.1
570
22.4
79.5
-
12
G2, L2
DG2
-
-
1493
58.8
534
21.0
652
25.7
551
21.7
29.5
-
VL2
16
20
L3
D2A
-
-
1494
58.8
542
21.3
641
25.2
587
23.1
33.0
-
21.00-25
Tubeless
RL
40
Industrial
Service
IDU
-
-
23.5-25
Tubeless
VL2
E3
L3
DE2
16
20
24
16
20
16
36
23.5-25
17.00/1.7
(12,16PR)
17.00/2.0
VL2
FG
FG
RLS
72
G2, L2
Loader
10
5
E/M
50
30
Grader
40
25
250
36
PR
kg
lbs
kPa
psi
RLS
225
33
275
40
300
44
325
47
350
51
375
54
73
-
1607
63.3
618
24.3
682
26.9
688
27.1
43.0
D2A
-
-
Industrial
Service
IDU
-
-
1658
65.3
615
24.2
724
28.5
668
26.3
67.5
450
65
475
69
500
73
525
76
550
80
575
83
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
725
105
750
109
PR
32
kg 10000 10450 10900 11500 11500 11800 12150 12500 12850 13200 13600 13600 14000 14500 14500 15000
lbs 22000 23000 24000 25400 25400 26000 26800 27600 28300 29100 30000 30000 30900 32000 32000 33100
kPa
psi
125
18
150
22
175
25
PR
kg
lbs
PR
kg
lbs
4125
9100
12
2800 3150 3550
6150 6950 7850
200
29
225
33
250
36
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
16
20
24
4500 4875 5150 5450 5800 6000 6300 6500 6700
9900 10700 11400 12000 12800 13200 13900 14300 14800
16
3750 4000
8250 8800
FG
VL2
DL
Loader
10
5
RL
IDU
PR
kg
lbs
12
16
20
24
6300 6700 7100 7500 7750 8250 8500 8750 9250 9500 9750 10000 10300
13900 14800 15700 16500 17100 18200 18700 19300 20400 20900 21500 22000 22700
-
kPa
psi
19.50/2.5
VL2
RLS
DL
VL2
D2A
L4
425
62
32
5600 6000 6300 6500 6900 7100 7300 7500 7750 8000 8250 8500 8750
12300 13200 13900 14300 15200 15700 16100 16500 17100 17600 18200 18700 19300
107
-
400
58
Size
18.00-25
TRA Code
or
Application
20.5-25
Ply
Rating
21.00-25
18.00-25
Pattern
-
RLS
Loader
10
5
E/M
50
30
IDU
175
25
200
29
225
33
PR
kg
8000
lbs
17600
PR
16
kg
5300 5800 6150
lbs 11700 12800 13600
250
36
275
40
300
44
16
8500 9000 9500
18700 19800 20900
20
6500 6900 7300
14300 15200 16100
325
47
350
51
375
54
400
58
425
62
450
65
475
69
20
24
10000 10600 10900 11200 11800 12150 12500
22000 23400 24000 24700 26000 26800 26700
24
7750 8000
17100 17600
DL
20
L5
D2A
-
-
1673
65.9
616
24.3
779
30.7
646
25.4
88.0
-
VL2
16
20
24
L3
D2A
-
-
1607
63.3
618
24.3
682
26.9
688
27.1
43.0
-
23.5-25
Tire Size
19.50/2.5
VL2
Loader
10
5
PR
kg
lbs
16
20
24
8000 8500 9000 9500 10000 10600 10900 11200 11800 12150 12500
17600 18700 19800 20900 22000 23400 24000 24700 26000 26800 26700
BIAS TIRE 73
Spec
20
24
26
16
24
26
32
E3
L3
DL
20
32
L5
D2A
-
STMS
32
36
L5S
D2A
26.5-25
VL2
20
24
L3
29.5-25
Tubeless
VL2
RLS
22
28
DE2
TKPH TMPH
132
-
90
-
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1738
683
745
734
68.4
26.9
29.3
28.9
OTD
mm
44.0
Minimum
Dual Spacing
mm
inch
-
Recommended
Rim/Flange Height
Pattern
inch
22.00/3.0
D2A
-
-
1785
70.3
700
27.6
800
31.5
736
29.0
67.0
-
-
1798
70.8
694
27.3
815
32.1
727
28.6
97.0
-
-
-
1798
70.8
680
26.8
827
32.6
719
28.3
95.0
-
D2A
-
-
1738
68.4
683
26.9
745
29.3
734
28.9
44.0
-
E3
L3
DE2
150
-
103
-
1850
72.8
770
30.3
792
31.2
833
32.8
49.0
-
RLS
28
L4
D2A
-
-
1912
75.3
784
30.9
813
32.0
805
31.7
74.0
-
DL
28
L5
D2A
-
-
1900
74.8
768
30.2
873
34.4
805
31.7
105.5
-
26"
23.1-26
Tubeless
AL2
8
C2
-
-
-
1472
58.0
595
23.4
654
25.7
618
24.3
19.0
-
23.1-26
AL2
8
C2
-
-
-
1472
58.0
595
23.4
654
25.7
618
24.3
19.0
-
29"
29.5-29
Tubeless
STMS
34
L5S
D2A
D2Z
-
-
2023
79.6
749
29.5
931
36.7
792
31.2
103.0
-
25.00/3.5
200
29
225
33
250
36
275
40
E/M
50
30
VL2
RLS
DL
STMS
Loader
10
5
PR
kg
lbs
VL2
E/M
50
30
Loader
10
5
PR
22
kg
8000 8750 9250 10000 10600
lbs 17600 19300 20400 22000 23400
PR
kg
12150 12850 13600
lbs
26800 28300 30000
VL2
RLS
DL
300
44
325
47
350
51
375
54
400
58
425
62
450
65
Size
475
69
500
73
525
76
550
80
630
92
PR
20
24
26
kg
6700 7300 7750 8250 8750 9250 9500
lbs 14800 16100 17100 18200 19300 20400 20900
16
20
24
26
32
10000 10900 11500 12150 12500 13200 13600 14000 14500 15000 15500 16000 16500 17000
22000 24000 25400 26800 27600 29100 30000 30900 32000 33100 34200 35300 36480 37500
36
18600
41000
28
10900 11500
24000 25400
28
14500 15000 16000 16500 17000 17500
32000 33100 35300 36480 37500 38600
26"
Compactor PR
10
kg
5
lbs
110
16
23.1-26
kPa
psi
DW20A
DW20B
8
2850
6285
29"
kPa
psi
25.00/3.5
STMS
Loader
10
5
175
25
200
29
PR
kg
lbs
225
33
250
36
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
34
12850 14000 14500 15500 16000 17000 17500 18000 19000 19500 20000 20600 21200
28300 30900 32000 34200 35300 37500 38600 39700 41900 43000 44100 45400 46700
32"
TGS
16
LS2
S2V
-
-
1847
72.7
780
30.7
840
33.1
790
31.1
56.0
-
DW27A
DW27B
TGS
74
175
25
VL2
AL2
32"
30.5L-32
kPa
psi
D2A
L4
Application
Max.Speed
km/h
mph
26.5-25
TRA Code
or
Application
29.5-25
VL2
Ply
Rating
29.5-29
26.5-25
Tubeless
Pattern
Logging
kPa
psi
105
15
140
20
170
25
210
30
245
36
270
40
PR
kg
lbs
PR
kg
lbs
16
32km/h(20mph) Maximum Speed
4710 5370
10390 11840
16
16km/h(10mph) Maximum Speed
4345 5140 5855 6520 7130
9580 11330 12910 14370 15720
30.5L-32
Tire Size
BIAS TIRE 75
Ply
Rating
TRA Code
or
Application
Spec
E4
E2A
161
110
E1A
182
125
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
587
23.1
13.00/2.5
Pattern
inch
76
Size
E2A
161
110
36
Industrial
Service
IDU
-
-
1860
73.2
509
20.0
860
33.9
887
34.9
530
20.9
533
21.0
56.5
66.5
E/M
50
30
ELS2
IDU
275
40
300
44
325
47
350
51
375
54
400
58
D2V
-
-
2085
82.1
890
35.0
953
37.5
928
36.5
62.5
-
DL
24
30
42
L5
D2V
-
-
2085
82.1
890
35.0
979
38.5
945
37.2
97.0
97.0
-
RL
40
Industrial
Service
IDU
-
-
28.00/3.5
NL
DL
35"
RLS
36
E4
E2A
204
140
ELS2
40
Industrial
Service
IDU
-
-
E3
E1A
2040
80.3
588
23.1
950
37.4
610
24.0
59.5
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
L4
RLS
425
62
PR
32
36
kg
6500 6900 7300 7500 8000 8250 8500 8750 9000 9250 9750 10000 10300 10500 10700 10900
lbs 14300 15200 16100 16500 17600 18200 18700 19300 19800 20400 21500 22000 22700 23100 23600 24000
24
30
36
RLS
ELS2
587
23.1
NL
RL
kPa
psi
18.00-33
E4
504
19.8
701
27.6
15.00/3.0
RL
ELS2
Loader
10
5
E/M
50
30
IDU
PR
24
30
42
kg 16500 17000 18000 19000 19500 20000 21200 21800 22400 23000 23600 24300 25000 25750 26500
lbs 36480 37500 39700 41900 43000 44100 46700 48100 49400 50700 52000 53600 55100 56800 58400
35/65-33
32
1877
73.9
PR
36
kg
8750 9000 9500 10000 10300 10900 11200 11500 11800 12150 12500 12850
lbs 19300 19800 20900 22000 22700 24000 24700 25400 26000 26800 27600 28300
358
245
2330
91.7
955
37.6
1060
41.7
1000
39.4
51.5
-
kPa
psi
31.00/4.0
E/M
50
30
175
25
200
29
225
33
250
36
275
40
300
44
325
47
PR
36
kg 13600 14500 15500 16500 17500 18500 19500
lbs 30000 32000 34200 36400 38600 40800 43000
L5
D2V
-
-
2420
95.3
1020
40.2
1112
43.8
1070
42.1
106.5
-
kPa
psi
32.00/4.0
DL
42
L5
D2V
-
-
2510
98.8
1054
41.5
1145
45.1
1104
43.5
115.5
-
32.00/4.5
DL
45"
45/65-45
Tubeless
DL
38
58
L5
D2V
-
-
2730
107.5
1146
45.1
1261
49.6
1185
46.6
116.0
-
36.00/4.5
45"
DL
51"
50/65-51
Tubeless
DL
62
L5
D2V
-
-
3070
120.9
1260
49.6
1412
55.6
1300
51.2
127.5
-
40.00/4.5
51"
DL
57"
65/65-57
Tubeless
DL
62
L5
D2V
-
-
3735
147.0
1640
64.6
1672
65.8
1706
67.2
142.5
-
52.00/6.0
57"
DL
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
Loader
L5
10
5
L5
PR
kg 22400 23600 25000
lbs 49400 52000 55100
PR
kg 27250 29000 30000
lbs 60000 64000 66000
Loader
10
5
PR
38
58
kg 30000 31500 32500 34500 35500 37500 38750 40000 41250 42500 43750 45000 46250 47250 48250 49250 50000
lbs 66000 69500 71500 76000 78500 82500 85500 88000 91000 93500 96500 99000 102000 104200 106400 108600 110000
Loader
10
5
PR
62
kg 37500 40000 42500 43750 46250 47500 48750 51500 53000 54500 56000 58000 58000 60000 61500 63000
lbs 82500 88000 93500 96500 102000 104500 107500 113500 117000 120000 123500 128000 128000 132500 135500 139000
Loader
10
5
PR
62
kg 67000 71000 73000 77500 80000 82500 87500 90000 92500 95000
lbs 147500 156500 161000 171000 176500 182000 193000 198500 204000 209500
56
25750 27250 28000 29000 30000 30750 31500 32500 34500 34500 36500 37500 38750 40000 41250
56800 60000 61500 64000 66000 68000 69500 71500 76100 76000 80500 82700 85400 88200 90900
42
31500 32500 33500 35500 36500 37500
69500 71500 74000 78500 80500 82500
41.25/70-39
56
40/65-39
39"
DL
DL
41.25/70-39
Tubeless
21.00-35
32
RL
39"
40/65-39
Tubeless
Application
Max.Speed
km/h
mph
45/65-45
37.25-35
Tubeless
OTD
37.25-35
ELS2
35"
21.00-35
Tubeless
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
33"
RLS
36
35/65-33
Tubeless
TKPH TMPH
50/65-51
33"
18.00-33
Tubeless
Pattern
65/65-57
Tire Size
BIAS TIRE 77
TRA Code
or
Application
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
Pattern
Size
TBA*
TBA*
TBA*
TBA*
24.0
378
14.9
8.50V
STMS
20
Industrial
Service
1275
50.2
321
12.6
606
23.9
339
13.3
55.0
391
15.4
8.50V
14.00-24
RL
24
28
Industrial
Service
1355
53.3
367
14.4
627
24.7
400
15.7
28.0
450
17.7
10.00W
14.00-24 TG
Tubeless
RL
24
Industrial
Service
1360
53.5
395
15.6
614
24.2
410
16.1
28.0
450
17.7
10.00VA
RLS
24
Industrial
Service
1407
55.4
390
15.4
646
25.4
440
17.3
48.0
-
RL
28
32
Industrial
Service
1495
58.9
445
17.5
671
26.4
459
18.1
33.5
513
20.2
RLS
28
32
Industrial
Service
1548
60.9
438
17.2
722
28.4
460
18.1
57.0
513
20.2
YS2
28
32
Industrial
Service
1465
57.7
430
16.9
658
25.9
472
18.6
49.2
513
20.2
16.00-25
RL
28
Industrial
Service
1478
58.2
445
17.5
671
26.4
459
18.1
33.5
513
20.2
18.00-25
Tubeless
RL
36
40
Industrial
Service
1608
63.3
508
20.0
727
28.6
572
22.5
36.0
587
23.1
ELS2
40
Industrial
Service
1685
66.3
515
20.3
796
31.3
530
20.9
66.5
587
23.1
24"
STMS
RL
RLS
25"
RL
RLS
YS2
RL
ELS2
STMS
0
Static
Creep
Creep
5
3
10
5
15
9
20
12
25
15
30
19
20
Load
Wheel
Steering
Wheel
1000
145
1000
145
kg
lbs
kg
lbs
11800
26000
9500
20900
10600
23400
8500
18700
9500
20900
7750
17100
9000
19800
7100
15700
8500
18700
6900
15200
8500
18700
6700
14800
8250
18200
6500
14300
8250
18200
6500
14300
IDU
20
IDU
24
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
1000
145
1000
145
1000
145
1000
145
1000
145
1000
145
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
12500
27600
10000
22000
17000
37500
13600
30000
18000
39700
14500
32000
10900
24000
8750
19300
15000
33100
12150
26800
16000
35300
12850
28300
10000
22000
8000
17600
13600
30000
10900
24000
14500
32000
11500
25400
9250
20400
7500
16500
12850
28300
10300
22700
13600
30000
10900
24000
9000
19800
7100
15700
12500
27600
10000
22000
12850
28300
10300
22700
8750
19300
7100
15700
12150
26800
9750
21500
12850
28300
10300
22700
8500
18700
6900
15200
11800
26000
9500
20900
12500
27600
10000
22000
8500
18700
6900
15200
11800
26000
9500
20900
12500
27600
10000
22000
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
900
131
900
131
1000
145
1000
145
kg
lbs
kg
lbs
kg
lbs
kg
lbs
20600
45400
16500
36400
22400
49400
18000
39700
18500
40800
14500
32000
20000
44100
16000
35300
16500
36400
13200
29100
18000
39700
14500
32000
15500
34200
12500
27600
17000
37500
13600
30000
15000
33100
11800
26000
16500
36400
12850
28300
14500
32000
11500
25400
16000
35300
12850
28300
14500
32000
11500
25400
15500
34200
12500
27600
14500
32000
11500
25400
15500
34200
12500
27600
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
1000
145
1000
145
1000
145
1000
145
kg
lbs
kg
lbs
kg
lbs
kg
lbs
29000
64000
23000
50700
30750
68000
25000
55100
25750
56800
20600
45400
27250
60000
21800
48100
23000
50700
18500
40800
24300
53600
19500
43000
21800
48100
17500
38600
23000
50700
18500
40800
20600
45400
16500
36400
21800
48100
17500
38600
20600
45400
16500
36400
21800
48100
17500
38600
20000
44100
16000
35300
21200
46700
17000
37500
20000
44100
16000
35300
21200
46700
17000
37500
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
1000
145
1000
145
830
120
830
120
kg
lbs
kg
lbs
kg
lbs
kg
lbs
36500
80500
29000
64000
28000
61500
22400
49400
32500
71500
25750
56800
25000
55100
20000
44100
29000
64000
23600
52000
22400
49400
18000
39700
27250
60000
21800
48100
21200
46700
17000
37500
26500
58400
21200
46700
20000
44100
16000
35300
25750
56800
20600
45400
20000
44100
16000
35300
25000
55100
20000
44100
19500
43000
15500
34200
25000
55100
20000
44100
19500
43000
15500
34200
Load
Wheel
Steering
Wheel
1000
145
1000
145
kg
lbs
kg
lbs
33500
74000
26500
58400
29000
64000
23600
52000
26500
58400
21200
46700
25000
55100
20000
44100
24300
53600
19000
41900
23600
52000
19000
41900
23000
50700
18500
40800
23000
50700
18500
40800
IDU
28
32
13.00/2.5
km/h
mph
IDU
28
11.25/2.0
kPa
psi
IDU
36
40
STMS
40
Industrial
Service
1675
65.9
520
20.5
762
30.0
550
21.7
84.0
587
23.1
21.00-25
Tubeless
RL
40
Industrial
Service
1745
68.7
560
22.0
775
30.5
620
24.4
41.0
668
26.3
15.00/3.0
RL
IDU
40
23.5-25
Tubeless
RLS
36
Industrial
Service
1658
65.3
615
24.2
724
28.5
668
26.3
67.5
695
27.4
19.50/2.5
RLS
IDU
36
ELS2
36
Industrial
Service
1860
73.2
509
20.0
887
34.9
533
21.0
66.5
587
23.1
13.00/2.5
33"
ELS2
IDU
36
12.00-24
316
12.4
14.00-24
1138
44.8
16.00-25
Industrial
Service
18.00-25
20
12.00-20
Industrial Service
20"
24"
12.00-24
33"
18.00-33
Tubeless
Inflation
Pressure
inch
RL
25"
16.00-25
Tubeless
Ply
Rating
Appli.
21.00-25
Industrial Service
20"
12.00-20
RL
Ply
Rating
23.5-25
Pattern
18.00-33
Tire Size
78
BIAS TIRE 79
35"
21.00-35
Tubeless
Pattern
Ply
Rating
TRA Code
or
Application
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
15.00/3.0
Pattern
Ply
Rating
Appli.
Inflation
Pressure
Size
inch
35"
RL
40
Industrial
Service
2000
78.7
575
22.6
937
36.9
648
25.5
41.0
701
27.6
ELS2
40
Industrial
Service
2040
80.3
592
23.3
955
37.6
617
24.3
67.0
701
27.6
RL
ELS2
IDU
40
Load
Wheel
Steering
Wheel
kPa
psi
km/h
mph
0
Static
Creep
Creep
5
3
10
5
15
9
20
12
25
15
30
19
1000
145
1000
145
kg
lbs
kg
lbs
43750
96500
34500
76000
38750
85500
30750
68000
35500
78500
28000
61500
32500
71500
26500
58400
31500
69500
25000
55100
30750
68000
25000
55100
30000
66000
24300
53600
30000
66000
24300
53600
21.00-35
Tire Size
Off-the-Road Tires Used for Industrial Vehicle Applications
1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log
stackers etc., used on hard improved surfaces, smooth floors and runways.
2) Use Specifications of Industrial Service only.
3) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).
4) For Speeds exceeding 30km/h (18mph), consult a Bridgestone Representative.
5) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative.
6) For RTG (Rubber Tired Gantry Crane) operation, consult a Bridgestone Representative.
Sand Service
20"
14.00-20
Pattern
Ply
Rating
TRA Code
or
Application
OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
Pattern
Appli.
18
E7
1206
47.5
370
14.6
TBA*
TBA*
TBA*
TBA*
10.5
-
Tire Load Limits at Various Cold Inflation Pressures (100kPa = 1bar)
Size
inch
Sand Service
20"
SCP2
Max.
Speed
✽ When
tires are to be used under conditions other than those recommended above, consult a Bridgestone Representative.
9.00V
SCP2
Sand
10km/h
5mph
50km/h
30mph
65km/h
40mph
kPa
psi
70
10
100
15
140
20
170
25
210
30
240
35
kg
lbs
kg
lbs
kg
lbs
1960
4320
1340
2950
1135
2500
2485
5480
1695
3740
1435
3160
2950
6500
2015
4440
1695
3740
3355
7400
2285
5040
140
4280
3720
8200
2550
5620
2160
4760
4080
9000
2790
6150
2360
5200
14.00-20
Tire Size
80
BIAS TIRE 81
4.3 Load-and-Carry Operations for Front End Loader Service
4. Remarks
4.1 Excess Load
Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those in the appropriate above-listed
load tables are often encountered.
These excess loads result from items such as actual vehicle weight exceeding the design weight, varying density of
materials, field modifications to the equipment,
E2, E3, E4*
L**
load transfer, etc.
Maximum Excess Load
15%
15%
Only under these conditions, the actual tire load
Maximum
Excess
Pressure
30%
30%
in service may exceed the above load ratings
for the tire(*) by an amount not greater than
825kPa
825kPa
Maximum Pressure
shown in the following table:
120psi
120psi
Service conditions of a loader is defined as “picking up material and relocating a short distance away, a maximum of
76m (250 feet), one way, with a maximum speed of 10km/h (5mph)”. However, a loader can pick up a load and
transport such load to another location and return unloaded for a longer distance. This type of service is called Loadand-Carry operations. Transportation usually occurs at low speeds, up to 25km/h (15mph), and distances are
limited.
The tires when used in Load-and-Carry operations may encounter heat problems especially on the front axle tires.
To avoid such problems, Bridgestone recommends the following operating conditions.
For tires over 33" inch rim diameter tires, careful study is required to maximize tire life while considering TonKilometer-Per-Hour (Ton-Mile-Per-Hour) limits. Please consult Bridgestone representative for more information.
If you need to use the tire beyond this recommendation, please consult Bridgestone representative.
When excess loads are encountered, cold inflation pressures must be increased to compensate for higher loads.
For each 1% increase in load, the inflation pressure must be increased by 2%.
*except following sizes on the list
9.00-20
10.00-20
11.00-20
For Bias Tires
Load Capacity**
10km/h (5mph)
**except following sizes on the list
5.70-12
23x8.50-12
27x8.50-15
33x12.5-15
12.5/70-16
10-16.5
12-16.5
12.5/65-18
15.5/60-18
15.5/70-18
15.5/70-20
42x17-20
17.5/65-20
16.9-24
18.4-24
The maximum excess loads will result in reduced tire performance.
4.2 The Variation in Load Carrying Capacity with Operating Speed
Operating Speed
(km/h)
Static
Creep
4
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
80<
E2, E3, E4**
G
*
+12%
+10%
+8%
+6%
+4%
+3%
+2%
0
*
*
*
*
*
*
*
**except following sizes on the list
-
Inflation Pressure
for Front Tires
Standard inflation
pressure
+
100kpa (15psi)
Allowable Average
Work-shift Speed
(km/h)
85% of
STD. load
1200
500
10
***
300
Rim Diameter
29" and below
L2, L3
L4
L5
L5S
Maximum Cycle
Distance
(m)
33" and above
90% of
STD. load
3
** STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating.
Please refer to the load - inflation pressure table for loader and dozer service “10km/h (5mph) service”.
***Not permissible
The inflation pressure should not exceed 825kPa (120psi).
L***
+60%
+30%
+15%
0
-13%
-20%
4.4 Other Remark
For L5/L5S tyres following sizes on the list, on front tires for front end loaders, it is permissible to increase inflation
pressure up to 100kPa (15psi) above, with no increase in load.
(Maximum inflation pressure should not exceed 825 kPa (120psi).)
17.5-25
20.5-25
23.5-25
0
-9%
-18%
-27%
*
9.00-20
Tread
Class
10.00-20
26.5-25
29.5-25
29.5-29
35/65-33
40/65-39
41.25/70-39
45/65-45
50/65-51
65/65-57
Reference speed for calculating load variance
Consult a Bridgestone Representative
11.00-20
***except following sizes on the list
5.70-12
23x8.50-12
27x8.50-15
82
33x12.5-15
12.5/70-16
10-16.5
12-16.5
12.5/65-18
15.5/60-18
15.5/70-18
15.5/70-20
42x17-20
17.5/65-20
16.9-24
18.4-24
BIAS TIRE 83
OTHER SPECIFICATION
1. O-Ring Specifications
Code
No.
Applicable Size
Radial
13.00R24 TG
14.00R24 TG
16.00R24 TG
P-25AX 14.00R25*
15.5R25
17.5R25
20.5R25
29.5R25
385/95R25
445/80R25
445/95R25
14.00R25**
P-25B
16.00R25
17.5R25
18.00R25
20.5R25
21.00R25
23.5R25
25/65R25
26.5R25
29.5R25
30/65R25(750/65R25)
385/95R25
445/80R25
445/95R25
505/95R25
525/80R25
550/65R25
650/65R25
750/65R25
29.5R29
P-29B
33.25R29
775/65R29
875/65R29
P-24A
Diameter
3. Rim and Valve
Inner
Circumference
inch
Code
No.
Bias
mm
inch
mm
13.00-24 TG
14.00-24 TG
15.5-25
17.5-25
20.5-25
16.00-25
17.5-25
18.00-25
20.5-25
21.00-25
23.5-25
26.5-25
29.5-25
29.5-29
-
6.6
0.26
1768 69.61
P-33B
6.8
0.27
1779 70.04
P-35B
P-39B
9.8
0.39
1779 70.04
P-45B
P-49B
P-51C
P-57C
P-63C
9.8
0.39
2127 83.74
Applicable Size
Radial
18.00R33
21.00R33
35/65R33
21.00R35
24.00R35
29.5R35
33.25R35
37.25R35
37.5R39
40.5/75R39
45/65R39
45/65R45
24.00R49
27.00R49
31/90R49
30.00R51
33.00R51
36.00R51
50/65R51
37.00R57
40.00R57
42/90R57
46/90R57
50/90R57
55.5/80R57
60/80R57
53/80R63
59/80R63
Diameter
Inner
Circumference
Bias
mm
inch
mm
inch
18.00-33
35/65-33
21.00-35
37.25-35
40/65-39
41.25/70-39
45/65-45
50/65-51
65/65-57
-
9.8
0.39
2382
93.78
9.8
0.39
2572 101.26
9.8
0.39
2900 114.17
9.8
9.8
0.39
0.39
3326 130.94
3611 142.17
12.7
0.5
3694 145.43
12.7
0.5
4129 162.56
Rim Width
Rim Flange
12.7
0.5
4580 180.31
Rim Flange
Lock Ring
2. Flap Specifications
Flap
550/600-15
650/700/750-15
12/65B-15
750/825AR15
750/825-R16
200D1000-R15
700A825-R20
900A111-R20
1100B13/80-R20
1400/14/80R20
1300A1600-20
42x17-20
14/70-20
1300-24
1200A1400-24,25
1100B1300-R24
1300/1400-24,25
1400/1600R24,25
1600-24,25
155A1800-24,25
235-25
265-25
2100R33
84
Bead-Seat Band
Rim Base
* For Rim Size 10.00-25
** For Rim Size 11.25-25
Locking Key
(part of lock ring)
Bead Seat
πDB
G1
P
mm
inch
mm
inch
mm
inch
1175
1177
1196
1201
1255
1201
1255
1201
1594
1594
1618
1576
1587
1916
1942
1922
1942
1942
1916
1926
1934
2010
2553
46.3
46.3
47.1
47.3
49.4
47.3
49.4
47.3
62.8
62.8
63.7
62.1
62.5
75.4
76.5
75.7
76.5
76.5
75.4
75.8
76.1
79.1
100.5
4.0
4.5
7.0
6.0
5.0
6.5
5.0
6.0
6.5
8.5
8.0
9.0
9.0
9.0
9.0
7.5
9.0
9.0
9.0
6.0
9.0
12.0
9.0
0.16
0.18
0.28
0.24
0.20
0.26
0.20
0.24
0.26
0.33
0.31
0.35
0.35
0.35
0.35
0.30
0.35
0.35
0.35
0.24
0.35
0.47
0.35
129
169
270
184
174
205
180
205
218
240
246
390
331
229
232
220
232
260
293
340
560
570
413
5.1
6.7
10.6
7.2
6.9
8.1
7.1
8.1
8.6
9.4
9.7
15.4
13.0
9.0
9.1
8.7
9.1
10.2
11.5
13.4
22.1
22.4
16.3
Nominal
Diameter
Valve-Stem
Support
Valve Hole
O-Ring
8.50V
P
G1
24
DB
Nominal Diameter of Rim (inches)
Flange Type
Rim Width (inches)
Flap
OTHER SPECIFICATION 85
3.1 Rim Designation
Full Tapered Bead Seat Rims (5 pieces)
A
11.00/1.5
11.25/2.0
13.00/2.5
15.00/3.0
17.00/2.0
17.00/3.5
18.00/1.5
19.50/2.5
19.50/4.0
20.00/2.0
22.00/3.0
22.00/4.5
24.00/3.0
24.00/3.5
24.00/5.0
25.00/3.5
26.00/5.0
27.00/3.5
27.00/6.0
28.00/3.5
29.00/6.0
31.00/4.0
32.00/4.0
32.00/4.5
32.00/6.5
34.00/6.5
36.00/4.5
36.00/5.0
40.00/4.5
41.00/5.0
44.00/5.0
44.00/6.0
47.00/6.0
52.00/6.0
86
Tire Size
Radial
14.5R15
16.00R25
445/95R25(16.00R25)
18.00R25
505/95R25(18.00R25)
18.00R33
21.00R25
21.00R33
21.00R35
550/65R25
24.00R35
24.00R49
24R21
23.5R25
650/65R25
27.00R49
31/90R49
25/65R25
750/65R25(30/65R25)
26.5R25
30.00R51
750/65R25(30/65R25)
775/65R29
33.00R51
29.5R25
775/65R29
29.5R29
29.5R35
36.00R51
875/65R29
33.25R29
33.25R35
37.00R57
42/90R57
875/65R29
35/65R33
40.00R57
46/90R57
37.25R35
37.5R39
40.5/75R39
45/65R39
50/90R57
50/90R57
45/65R39
45/65R45
53/80R63
50/65R51
59/80R63
59/80R63
55.5/80R57
60/80R57
-
Bias
16.00-25
18.00-25
18.00-33
21.00-25
21.00-35
24.00-35
23.5-25
26.5-25
29.5-25
29.5-29
35/65-33
37.25-35
40/65-39
41.25/70-39
45/65-45
50/65-51
65/65-57
Flat Base Rims
D
B
Recommended Rim/
Flange Height
Semi Drop Center Rims (SDC)
Full Tapered Bead Seat Rims (3 pieces)
Tire Size
Recommended Rim/
Flange Height
Radial
Bias
14.00R25
385/95R25(14.00R25)
15.5R25
12.00/1.3
17.5R25
14.00/1.5
445/80R25(17.5R25)
550/65R25
550/65R25
17.00/2.0
17.00AL/1.7(★1only) 20.5R25
17.00/1.7
20.5R25
17.00/2.0
525/80R25(20.5R25)
10.00/1.5
14.00-25
15.5-25
17.5-25
20.5-25
20.5-25
-
E
Recommended Rim/
Flange Height
Tire Size
Radial
13.00R24 TG
14.00R24 TG
16.00R24 TG
335/80R20
365/80R20
405/70R20
-
6.00GS
8.00TG
10.00F
10.00VA
11x20
11.00TG
13x20
14.00TG
Bias
6.50T
7.50-15
7.50-16
14.00-24 TG
33x12.5-15
13.00-24 TG
14.00-24 TG
16.00-24 TG
14/70-20
42x17-20
7.00T
7.50V
8.00V
8.5
8.50V
9.00
9.00V
10.00WI
10.00W
Drop Center Rims (DC, W, DW)
C
4.50E
5.1/2K
5.50F
7JA
11LB
6LB
8LB
10LB
8.25
9.75
W10
W13
W14L
W15L
DW20B
DW21B
DW27B
Radial
Bias
8.25R15
9.00R20
10.00R15
11.00R20
12.00R20
12.00R24
12R22.5
14.00R20
16.00R20
14.00R24
385/95R24(14.00R24)
385/95R25(14.00R25)
8.25-20
9.00-20
10.00-20
14.00-20
11.00-20
12.00-24
12.00-20
12.00-24
14.00-24
14.00-24
-
Tire Size
Recommended Rim/
Flange Height
5JA
Tire Size
Recommended Rim/
Flange Height
Radial
-
Bias
5.70-12
23x8.50-12
5.50-15
9.00-15
9.00-15
23x8.50-12
27x8.50-15
9.5/65-15
14.0/65-15
7.50-16
10.5/80-16
12.5/70-16
10-16.5
12-16.5
12.5/65-18
15.5/70-18
15.5/70-20
17.5/65-20
16.9-24
18.4-24
16.9-28
23.1-26
24.5-32
30.5L-32
A
C
B
D
E
Interchangeable Swivel Valves For Tubeless Or Tube Type Tires
3.2 Valve Types
Large Bore Valves
TRJ4000-4 1/2
Tube Valve and
Rim Section
Dimensions (mm)
F˚
A
B
TRJ650
27.5 79.5 80˚
TRJ4000-4 1/2 31
114.0 90˚
TRJ4000-8
31
203.0 90˚
TRJ4000-7 1/2 31
190.5 90˚
B
Valve No.
F˚
Tube
Flap
A
This type of VALVE consists of a combination of the rubber base SP-4000 or
SP-2.
Tube Type Spud
Tubeless Type Spud
SP4000
SP2
28mm
Tube Valve
Tubeless Valve and
Rim Section
9.5mm
Inner Liner
Standard valve location is
on center line
Optional location is shown.
ø114mm
Tube Type Rubber Base Valves
TR218
B
A
Valve No.
A
B
TR218A
20.6
11.1
TR220A
30.2
20.7
Rim Valve
9.5mm
Dimensions (mm)
Tube Valve
ø63.5mm
B
PV-7
86˚
Tubeless Valve
A
Valve No.
PV-7
Dimensions (mm)
A
B
C
D dia.
73
100
7
90
C
D dia.
88
Tube Type Rubber Covered Valves
JS75
Dimensions (mm)
F˚
A
B
Valve No.
B
JS75
TR76A
TR77A
TR77E
TR78A
TR175A
TR177A
JS177B
JS179
JS179A
TR179A
PV38
PV89
V3-02-3
V3-02-15
F˚± 2˚
A
ø95mm
24
70
24
86
24
105
35
94
24
127
24
115
24
95
28
91
36
133
29
137
24
141
24
136
42.8
123
35.8 44.5
23.3 145.5
TR13
E
82˚
86˚
86˚
86˚
86˚
86˚
86˚
86˚
86˚
86˚
86˚
80˚
86˚
85˚
86˚
38mm
Valve No.
Dimensions (mm)
E
11.5
16.5
TR13
TR15
ø56mm
Tube Type Screw-on Valves
PV88
B
D
G˚
JSJ1175
90˚
F˚
B
A
F˚± 2˚
C
Large Bore Valves
A
Valve No.
JSJ1078S
JSJ1175
JSJ1175B
JSJ1175C
Dimensions (mm)
A
B D dia. F˚
30
35
35
35
121
105
105
102
32
32
32
32
Valve No.
84˚
88˚
80˚
60˚
D dia.
V3-06-2
V3-06-5
PV88
PV118
ø95mm
TR150CW
A
Dimensions (mm)
B
C
D
F˚
23.3 44.5
23.3 62.5
26.3 80.5
35.4 130.0
20.8
25.9
47.0
84.0
37.5
49.0
54.5
–
55˚
41˚
30˚
10˚
G˚
55˚
41˚
30˚
–
ø15.5mm
JS2
B
F˚
88.5mm
A
Valve No.
JS2
Valves, TR150 and TR150CW, are also
called Hand Bendable Valves, that is, their
stems are made of very flexible material
permitting manual bending in all directions
and to any angle.
Dimensions (mm)
F˚
A
B
26
33
70˚
ø57mm
90
OTHER INFORMATION
1. Unit Conversion Tables
INFLATION PRESSURE
2
kg/cm
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2
WEIGHT
lb/in
kPa
bar
kg/cm
1
3
4
6
7
9
10
11
13
14
16
17
18
20
21
23
24
26
27
28
30
31
33
34
36
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
2
2
(FROM POUND TO KILOGRAM)
lb/in
kPa
bar
lb
kg
lb
kg
lb
kg
lb
kg
37
38
40
41
43
44
45
47
48
50
51
53
54
55
57
58
60
61
62
64
65
67
68
70
71
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
1
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
220
240
0.5
4.5
9.1
13.6
18.1
22.7
27.2
31.8
36.3
40.8
45.4
49.9
54.4
59.0
63.5
68.0
72.6
77.1
81.6
86.2
90.7
99.8
108.9
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
700
800
900
1000
1100
117.9
120.0
136.1
145.2
154.2
163.3
172.4
181.4
190.5
199.6
208.7
217.7
226.8
235.9
244.9
254.0
263.1
272.2
317.5
362.9
408.2
453.6
499.0
1200
1300
1400
1500
1600
1700
1800
1900
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4600
4800
544.3
589.7
635.0
680.4
725.8
771.1
816.5
861.8
907.2
997.9
1088.6
1179.4
1270.1
1360.8
1451.5
1542.2
1633.0
1723.7
1814.4
1905.1
1995.8
2086.6
2177.3
5000
5200
5400
5600
5800
6000
7000
8000
9000
10000
11000
12000
13000
14000
15000
16000
17000
18000
19000
20000
2268.0
2358.7
2449.4
2540.2
2630.9
2721.6
3175.2
3628.8
4082.4
4536.0
4989.6
5443.2
5896.8
6350.4
6804.0
7257.6
7711.2
8164.8
8618.4
9072.0
WEIGHT
kg/cm
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.4
7.5
92
2
2
lb/in
72
74
75
77
78
80
81
82
84
85
87
88
89
91
92
94
95
97
98
99
101
102
104
105
107
2
kPa
bar
kg/cm
490
500
510
520
530
540
550
560
570
580
590
600
610
620
630
640
650
660
670
680
690
700
710
720
730
4.9
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.6
7.7
7.8
7.9
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10.0
2
lb/in
108
109
111
112
114
115
116
118
119
121
122
124
125
126
128
129
131
132
133
135
136
138
139
141
142
bar
kg
lb
kg
lb
kg
740
750
760
770
780
790
800
810
820
830
840
850
860
870
880
890
900
910
920
930
940
950
960
970
980
7.4
7.5
7.6
7.7
7.8
7.9
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
1
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
2.2
11.0
22.0
33.1
44.1
55.1
66.1
77.2
88.2
99.2
110.2
121.3
132.3
143.3
154.3
165.3
176.4
187.4
198.4
209.4
220.5
242.5
264.6
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
350
400
450
500
550
286.6
308.6
330.7
352.7
374.8
396.8
418.9
440.9
463.0
485.0
507.1
529.1
551.2
573.2
595.2
617.3
639.3
661.4
771.6
881.8
992.1
1102.3
1212.5
600
650
700
750
800
850
900
950
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
lb
kg
1322.8 2500
1433.0 2600
1543.2 2700
1653.5 2800
1763.7 2900
1873.9 3000
1984.1 3500
2094.4 4000
2204.6 4500
2425.1 5000
2645.5 5500
2866.0 6000
3086.4 6500
3306.9 7000
3527.4 7500
3747.8 8000
3968.3 8500
4188.7 9000
4409.2 9500
4629.7 10000
4850.1
5070.6
5291.0
°C
(CENTIGRADE/FAHRENHEIT)
°F
°C
°F
°C
°F
+71
+159.8
+101
+213.8
+131
+267.8
72
161.6
102
215.6
132
269.6
109.4
73
163.4
103
217.4
133
271.4
44
111.2
74
165.2
104
219.2
134
273.2
59.0
45
113.0
75
167.0
105
221.0
135
275.0
60.8
46
114.8
76
168.8
106
222.8
136
276.8
17
62.6
47
116.6
77
170.6
107
224.6
137
278.6
10.4
18
64.4
48
118.4
78
172.4
108
226.4
138
280.4
11
12.2
19
66.2
49
120.2
79
174.2
109
228.2
139
282.2
10
14.0
20
68.0
50
122.0
80
176.0
110
230.0
140
284.0
9
15.8
21
69.8
51
123.8
81
177.8
111
231.8
141
285.8
8
17.6
22
71.6
52
125.6
82
179.6
112
233.6
142
287.6
7
19.4
23
73.4
53
127.4
83
181.4
113
235.4
143
289.4
6
21.2
24
75.2
54
129.2
84
183.2
114
237.2
144
291.2
5
23.0
25
77.0
55
131.0
85
185.0
115
239.0
145
293.0
4
24.8
26
78.8
56
132.8
86
186.8
116
240.8
146
294.8
3
26.6
27
80.6
57
134.6
87
188.6
117
242.6
147
296.6
2
28.4
28
82.4
58
136.4
88
190.4
118
244.4
148
298.4
1
30.2
29
84.2
59
138.2
89
192.2
119
246.2
149
300.2
0
32.0
30
86.0
60
140.0
90
194.0
120
248.0
150
302.0
+1
33.8
31
87.8
61
141.8
91
195.8
121
249.8
160
320.0
2
35.6
32
89.6
62
143.6
92
197.6
122
251.6
170
338.0
3
37.4
33
91.4
63
145.4
93
199.4
123
253.4
180
356.0
4
39.2
34
93.2
64
147.2
94
201.2
124
255.2
190
374.0
lb
5
41.0
35
95.0
65
149.0
95
203.0
125
257.0
200
392.0
5511.5
5732.0
5952.4
6173.0
6393.3
6613.8
7716.1
8818.4
9920.7
11023.0
12125.3
13227.6
14329.9
15432.2
16534.5
17636.8
18739.1
19841.4
20943.7
22046.0
6
42.8
36
96.8
66
150.8
96
204.8
126
258.8
7
44.6
37
98.6
67
152.6
97
206.6
127
260.6
8
46.4
38
100.4
68
154.4
98
208.4
128
262.4
(FROM KILOGRAM TO POUND)
kPa
TEMPERATURE
°F
°C
°F
°C
°F
-19
- 2.2
+11
+51.8
+41
+105.8
18
0.4
12
53.6
42
107.6
17
+1.4
13
55.4
43
16
3.2
14
57.2
15
5.0
15
14
6.8
16
13
8.6
12
°C
9
48.2
39
102.2
69
156.2
99
210.2
129
264.2
10
50.0
40
104.0
70
158.0
100
212.0
130
266.0
PRESSURE
kg/cm2
kPa
bar
kg/cm2
psi
1
98.07
0.9807
14.22
kPa
bar
0.0102
1
0.01
0.1450
1.020
100
1
14.503
psi
0.0703
6.895
0.06895
1
OTHER INFORMATION 93
2. Specific Weight (Approximately)
LENGTH
m.meter
c.meter
meter
k.meter
inch
foot
yard
mile
1
10.0000
1000.00
25.3995
304.794
914.383
-
0.10000
1
100.00
100000
2.53995
30.4794
91.4383
160931
0.00100
0.01000
1
1000.00
0.02540
0.30479
0.91438
1609.31
0.00001
0.00100
1
0.00003
0.00030
0.00091
1.60931
0.03937
0.39371
39.3707
39370.7
1
12.0000
36.0000
63360.0
0.00328
0.03281
3.28089
3280.89
0.08333
1
3.00000
5280.00
0.00109
0.01094
1.09363
1093.63
0.02778
0.33333
1
1760.00
0.00062
0.62138
0.00002
0.00019
0.00057
1
meter2
are
hectare
k.meter2
foot2
yard2
acre
mile2
0.010000
1
100.000
10000.0
0.000929
0.008361
40.4687
25900.2
0.000100
0.010000
1
100.000
0.000009
0.000084
0.404687
259.002
0.000001
0.000100
0.010000
1
0.000000
0.000000
0.004047
2.59002
10.7639
1076.39
107639.0
1
9.00000
43560.2
-
1.19600
119.600
11960.0
0.111111
1
4840.00
-
0.000247
0.024710
2.47105
247.105
0.000023
0.000207
1
640.000
0.000000
0.000039
0.003861
0.386098
0.000000
0.00000
0.001562
1
gram
k.gram
ton
s.ton
l.ton
ounce
pound
1
1000.00
907185
28.3495
453.592
0.00100
1
1000.00
907.185
1016.04
0.02835
0.45359
0.00100
1
0.90719
1.01604
0.00003
0.00045
0.00110
1.10230
1
1.12000
0.00003
0.00050
0.00098
0.98421
0.89286
1
0.00003
0.00045
0.03527
35.2739
35273.9
32000.0
35840.0
1
16.0000
0.00220
2.20462
2204.62
2000.00
2240.00
0.06250
1
cub.meter
liter
cub.inch
cub.foot
cub.yard
U.S.gallon
U.K.gallon
1
0.00100
0.00002
0.02832
0.76455
0.00379
0.00455
1000.00
1
0.01639
28.3167
764.554
3.78543
4.54596
61027.1
61.0271
1
1728.00
46656.0
231.000
277.413
35.3147
0.03532
0.00058
1
27.0000
0.13368
0.16037
1.30802
0.00131
0.00002
0.03704
1
0.00495
0.00594
264.186
0.26419
0.00433
7.48051
201.974
1
1.20091
220.216
0.22022
0.00361
6.23549
168.358
0.83270
1
m.meter
c.meter
meter
k.meter
inch
foot
yard
mile
AREA
2
meter
are
hectare
k.meter2
foot2
yard2
acre
mile2
1
100.000
10000.0
0.092903
0.836130
4046.87
-
Material
Pounds/cu.yd
Metric Tons/m3
Anthracite
2000
1.2
Basalt
3400
2.0
Bauxite
2400
1.4
Clay: dry
2500
1.5
wet
2900
1.7
Coal
1200
0.7
Copper ore
2700
1.6
Crushed gypsum
2700
1.6
Earth: dry
2500
1.5
wet
2700
1.6
Granite
2900
1.7
Gravel: dry
2900
1.7
wet
3400
2.0
Note: Weight of materials varies with moisture content, grain
exact weight.
Material
Pounds/cu.yd
Metric Tons/m3
Iron ore: Magnetite
4700
2.8
Limestone
2500
1.5
Pyrites
4400
2.6
Over-Burden
75%rock-25%earth
3400
2.0
50%rock-50%earth
2900
1.7
25%rock-75%earth
2700
1.6
Sand: dry
2400
1.4
wet
3000
1.8
Sandstone
2500
1.5
Snow: dry
170
0.1
wet
840
0.5
Uranium
2700
1.6
size, degree of compaction, etc. Test must be made to know
WEIGHT
gram
k.gram
ton
s.ton
l.ton
ounce
pound
CAPACITY
cub.meter
liter
cub.inch
cub.foot
cub.yard
U.S.gallon
U.K.gallon
FORCE
1 kgf
=
9.81 N
POWER (horse power)
94
1 hp
=
550 ft • lbf/s
=
745.7 W
1 PS
=
75 m • kgf/s
=
735.5 W
OTHER INFORMATION 95
MEMO
DATA BOOK
PRINTED WITH
SOY INK
Printed in Japan with vegetable-based ink on recycled paper
09ORA01E(Dec.’09)
TM

DATA BOOK - STROM PRAHA as

Transcription

Similar documents

rema tip top automotive programme - 2015/2016

More products, latest offers, great value and fast delivery

pattern digest

Caterpillar Performance Handbook

Haulage Truck - Goodyear Off-The

Large Specalog for 994H Wheel Loader, AEHQ6739-02