Skorpio

Skorpio.doc
RS Epos Version 3
Skorpio X3 - Configuration
This document explains the steps required in order to configure the new Datalogic
Skorpio X3.
Pre Configuration (Head Office PC)
Setting Up
Unpack all the items relating to the Skorpio X3.
1 x Skorpio X3
1 x Single Slot Charger
1 x PSU
Connect the PSU to the single slot charger and plug it into a mains socket. Then
plug the charger into your PC using a micro USB or printer cable. Be sure to plug the
charger directly into a USB port on your PC and not through a USB hub.
Attach the Battery to the Skorpio device and place the Skorpio into the charger and
wait for the device drivers to install on the PC. Once the installation is finished open
“Windows Mobile Device Centre” on the computer. If prompted with more, select “Don't
Register”.
At the Windows Mobile Device Centre Home Screen, you might need to press the
Home button and then choose,
“Connect without setting up your device”,
“File Management”
“Browse the content of your Device”.
This document is a guide to the operation of RS Epos V3.1 functionality may change in future releases
Copyright Re-Scan Ltd Michael Carter Revision #11 Page 1 of 8
Skorpio.doc
Copy the contents of the “Skorpio
Rescan Install Files” to the root directory
of the Skorpio. e.g. ‘Copy and Run’,
‘Program Files’ and ‘FlashDisk’
NxEM Licensing
Find the correct Licence that
matches the serial number of the handheld
device you are installing and then copy that
file into the “FlashDisk” folder.
Cleaning the Start Menu
With the Skorpio still in the
cradle using the PC browse to the
following folder in the Skorpio
directory:
“Windows”, “Start Menu”, “Programs”
(You may have to un-tick “Hide
Protected operating system files
(Recommended)” in order to browse
to this folder).
Remove – Games, Active Sync, Alarms, Calendar, Contacts, Getting Started, Help,
Internet Explorer, Marketplace, Messenger, MSN Money, MSN Weather, Notes, Phone,
Pictures & Videos, Remote Desktop Mobile, Search Phone, Tasks, Text, Windows Live and
Windows Media.
This document is a guide to the operation of RS Epos V3.1 functionality may change in future releases
Copyright Re-Scan Ltd Michael Carter Revision #11 Page 2 of 8
Skorpio.doc
Pre Configuration (Skorpio)
Date and Time
Remove the Skorpio from the cradle. (You
might need to leave the NXEmulator by pressing in
sequence: [BlueButton] [Up Arrow] [1] [2] [3] [4]
[ENT] )
Scroll to the time and press “Set”, Scroll to
“Time” and change settings for, “Time Zone”, “Date“
and “Time”.
Once all settings are correct press “OK” and
“Save”
Home Screen Setup
On the Skorpio press the “Windows Key”
the bottom left and then select the “File
Explorer” icon.
in
. Press the Icon in the top right that looks a
mobile phone under the title File Explorer then
browse to: “My Device\Copy and Run”.
Run the following programs:
“ChrisTec.Windows”, “Opera_Mobile”,
“NetCFv35” and “NxEm-DL”.
Once all programs have been installed click and
hold on the background of the folder and then
select “Show all Files”
Press the “Windows Key” and navigate to
“Settings”, “Home” and then in the top right
select “Items”. In the menu on the left make sure
that only “Date”, “Wireless”, “Managed Items” are ticked and then press “OK”.
The desktop or Home should now look like there is the date and wireless status at
the top and 4 blue boxes with RSRadio, Opera Mobile, Win VNC and NxEm Config.
This document is a guide to the operation of RS Epos V3.1 functionality may change in future releases
Copyright Re-Scan Ltd Michael Carter Revision #11 Page 3 of 8
Skorpio.doc
Scanner Configuration
On the Skorpio press the “Windows Key”,
“Settings”, “System” and “Decoding”. Press “Config”, “1D
Bar Code”, “EAN-13” and Tick “Send check digit”.
Press the right arrow to change to EAN-8 and tick “Send
check digit”, continue pressing the right arrow and tick all
“Send check digit” options that you see. Press “OK” and
“X”
VNC Configuration
On the Skorpio press the “Win VNC” button on
the home screen to start the service. Once the service
has started you will see a VNC icon in the bottom right
of the screen.
With File Explorer browse to “My Device\
Program Files\efonvnc\arm4” and then
open”vncconfig”. Once in the configuration software
select “Authentication” and “Config”. Enter a password
and press “OK”.
Once the changes have been made hold the
following buttons until the device has reset. [Yellow
Button] [Blue Button] and [ESC].
Set Device Name (optional)
Press Windows key, select Settings, then
System, then About. Select Device ID in the top right of
the About screen.
Rename the Device Name from ‘SkorpioX3’ to
‘Skorpio’ or whichever name you prefer.
This document is a guide to the operation of RS Epos V3.1 functionality may change in future releases
Copyright Re-Scan Ltd Michael Carter Revision #11 Page 4 of 8
Skorpio.doc
Power Configurations (Optional)
Press Windows Key
Select Settings
Select System
Select Power
Select Auto-Off
Press both buttons that say 5 Minutes and change
them to 30 or 60 minutes respectively for battery
and external power configurations. Press the X or
Close to return to the main menu.
Customer Installation
Wireless Configuration
On the Skorpio press the “Windows Key”, “Settings”, “Connections” and select
either the red/gray “Wi-Fi” icon or the “SCU” Icon with Laird. You are now in the wireless
configuration utility. To set up a wi-fi connectin select in order:
Select the “Profile” Tab
Press “Scan” button.
Tap the Wi-Fi SSID of the network
Press “Configure” button
Press “Yes”
Enter the Wireless Key for the network
if prompted
Select the “Main” Tab
Press “Yes”
Bring down the list of Active Profiles by
pressing the down arrow
Select the profile named after the Wi-Fi
SSID
Press “OK” in the bottom right.
This document is a guide to the operation of RS Epos V3.1 functionality may change in future releases
Copyright Re-Scan Ltd Michael Carter Revision #11 Page 5 of 8
Skorpio.doc
Back Office Configuration
In order for the Skorpio X3 to connect to the back office t needs to have a static IP
Address. The IP address can be set up on the computer by:
Click “Start” or the Windows Icon or Press the Windows Key
Run “CMD”
Type “ipconfig -all” (without the quotes) into the command prompt and press “enter”
Make a note of the, IPv4 Address, Subnet Mask, Default Gateway, DNS Servers
Open “Network and Sharing Centre”
Click “Change adapter settings”
Right Click “Local Area Connection”
Select “Properties”
Select “Internet Protocol Version 4 (TCP/IPv4)
Select “Properties”
Select “Use the following IP Address”
Fill in the details that you noted down
Press “Ok”
Press “Ok”
Re-Scan Configuration
We must now tell Re-Scan how the Skorpio will be connecting, to do this we log into
Re-Scan and go to,
System → Parameters → Interface → Picco → Amend → Client Number (Choose
Back Office Client Number) → TCP Port Number (1978) → Save
This document is a guide to the operation of RS Epos V3.1 functionality may change in future releases
Copyright Re-Scan Ltd Michael Carter Revision #11 Page 6 of 8
Skorpio.doc
NxEM Configuration
Once Re-Scan is configured to use the Skorpio
the Skorpio must be told how to connect to Re-Scan.
This is done via the “NXEM Config” program which can
be found on the home screen.
Remove Skorpio from cradle
Press NXEM Config
Press Open
Press the [+]
FlashDisk
nxemcfg.txt
Exit
Enter Back Office IP Address
Enter Server Port (1978)
Enter Device ID (We recommend the last 4 digits of the
S/N)
Enter Back Office Name
Press Save
This document is a guide to the operation of RS Epos V3.1 functionality may change in future releases
Copyright Re-Scan Ltd Michael Carter Revision #11 Page 7 of 8
Skorpio.doc
Known Issues
Issue
Solution
Wi-Fi Externally
Disabled
Screen has frozen
Remove the Skorpio from the charging station and try again.
Hold the Yellow, Blue and Esc buttons together to re-boot Skorpio
This document is a guide to the operation of RS Epos V3.1 functionality may change in future releases
Copyright Re-Scan Ltd Michael Carter Revision #11 Page 8 of 8