Linux Systems Performance

Apr, 2016 Linux Systems Performance Brendan Gregg
Senior Performance Architect
Systems Performance in 50 mins Agenda A brief discussion of 6 facets of Linux performance:
1. 
2. 
3. 
4. 
5. 
6. 
Observability
Methodologies
Benchmarking
Profiling
Tracing
Tuning
Audience: Everyone (DBAs, developers, operations, …)
1. Observability How do you measure these? Linux Observability Tools Observability Tools •  Tools showcase common metrics
–  Learning Linux tools is useful even if you never use them:
the same metrics are in GUIs
•  We usually use these metrics via:
–  Netflix Atlas: cloud-wide monitoring
–  Netflix Vector: instance analysis
•  Linux has many tools
–  Plus many extra kernel sources of data that lack tools, are
harder to use, and are practically undocumented
•  Some tool examples…
upGme •  One way to print load averages:
$ uptime
07:42:06 up
8:16,
1 user,
load average: 2.27, 2.84, 2.91
•  A measure of resource demand: CPUs + disks
–  Other OSes only show CPUs: easier to interpret
•  Exponentially-damped moving averages
•  Time constants of 1, 5, and 15 minutes
–  Historic trend without the line graph
•  Load > # of CPUs, may mean CPU saturation
–  Don’t spend more than 5 seconds studying these
top (or htop) •  System and per-process interval summary:
$ top - 18:50:26 up 7:43, 1 user, load average: 4.11, 4.91, 5.22
Tasks: 209 total,
1 running, 206 sleeping,
0 stopped,
2 zombie
Cpu(s): 47.1%us, 4.0%sy, 0.0%ni, 48.4%id, 0.0%wa, 0.0%hi, 0.3%si, 0.2%st
Mem: 70197156k total, 44831072k used, 25366084k free,
36360k buffers
Swap:
0k total,
0k used,
0k free, 11873356k cached
PID
5738
1386
1
2
[…]
USER
apiprod
apiprod
root
root
PR
20
20
20
20
NI VIRT RES SHR S %CPU %MEM
0 62.6g 29g 352m S 417 44.2
0 17452 1388 964 R
0 0.0
0 24340 2272 1340 S
0 0.0
0
0
0
0 S
0 0.0
TIME+
2144:15
0:00.02
0:01.51
0:00.00
•  %CPU is summed across all CPUs
•  Can miss short-lived processes (atop won’t)
•  Can consume noticeable CPU to read /proc
COMMAND
java
top
init
kthreadd
htop vmstat •  Virtual memory statistics and more:
$ vmstat –Sm 1
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---r b
swpd
free
buff cache
si
so
bi
bo
in
cs us sy id wa
8 0
0
1620
149
552
0
0
1
179
77
12 25 34 0 0
7 0
0
1598
149
552
0
0
0
0 205 186 46 13 0 0
8 0
0
1617
149
552
0
0
0
8 210 435 39 21 0 0
8 0
0
1589
149
552
0
0
0
0 218 219 42 17 0 0
[…]
•  USAGE: vmstat [interval [count]]
•  First output line has some summary since boot values
–  Should be all; partial is confusing
•  High level CPU summary
–  “r” is runnable tasks
iostat •  Block I/O (disk) stats. 1st output is since boot.
$ iostat -xmdz 1
Linux 3.13.0-29 (db001-eb883efa)
Device:
xvda
xvdb
xvdc
md0
rrqm/s
0.00
213.00
129.00
0.00
08/18/2014
wrqm/s
r/s
0.00
0.00
0.00 15299.00
0.00 15271.00
0.00 31082.00
w/s
0.00
0.00
3.00
3.00
_x86_64_
rMB/s
0.00
338.17
336.65
678.45
(16 CPU)
wMB/s
0.00
0.00
0.01
0.01
\
/
\
/
\
...
...
...
...
...
Workload •  Very useful
set of stats
...
...
...
...
...
\ avgqu-sz
/
0.00
\
126.09
/
99.31
\
0.00
await r_await w_await
0.00
0.00
0.00
8.22
8.22
0.00
6.47
6.47
0.00
0.00
0.00
0.00
ResulGng Performance svctm
0.00
0.06
0.06
0.00
%util
0.00
86.40
86.00
0.00
free •  Main memory usage:
$ free -m
total
Mem:
3750
-/+ buffers/cache:
Swap:
0
used
1111
436
0
free
2639
3313
0
•  buffers: block device I/O cache
•  cached: virtual page cache
shared
0
buffers
147
cached
527
strace •  System call tracer:
$ strace –tttT –p
1408393285.779746
1408393285.779873
1408393285.780797
1408393285.781338
) = 15 <0.000048>
313
getgroups(0, NULL)
= 1 <0.000016>
getgroups(1, [0])
= 1 <0.000015>
close(3)
= 0 <0.000016>
write(1, "LinuxCon 2014!\n", 15LinuxCon 2014!
•  Eg, -ttt: time (us) since epoch; -T: syscall time (s)
•  Translates syscall args
–  Very helpful for solving system usage issues
•  Currently has massive overhead (ptrace based)
–  Can slow the target by > 100x. Use extreme caution.
tcpdump •  Sniff network packets for post analysis:
$ tcpdump -i eth0 -w /tmp/out.tcpdump
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size
^C7985 packets captured
8996 packets received by filter
1010 packets dropped by kernel
# tcpdump -nr /tmp/out.tcpdump | head
reading from file /tmp/out.tcpdump, link-type EN10MB (Ethernet)
20:41:05.038437 IP 10.44.107.151.22 > 10.53.237.72.46425: Flags [P.],
20:41:05.038533 IP 10.44.107.151.22 > 10.53.237.72.46425: Flags [P.],
20:41:05.038584 IP 10.44.107.151.22 > 10.53.237.72.46425: Flags [P.],
[…]
65535 bytes
seq 18...
seq 48...
seq 96...
•  Study packet sequences with timestamps (us)
•  CPU overhead optimized (socket ring buffers), but can
still be significant. Use caution.
netstat •  Various network protocol statistics using -s:
•  A multi-tool:
$ netstat –s
-i: interface stats
-r: route table
default: list conns
•  netstat -p: shows
process details!
•  Per-second interval
with -c
[…]
Tcp:
736455 active connections openings
176887 passive connection openings
33 failed connection attempts
1466 connection resets received
3311 connections established
91975192 segments received
180415763 segments send out
223685 segments retransmited
2 bad segments received.
39481 resets sent
[…]
TcpExt:
12377 invalid SYN cookies received
2982 delayed acks sent
[…]
slabtop •  Kernel slab allocator memory usage:
$ slabtop
Active / Total Objects (% used)
Active / Total Slabs (% used)
Active / Total Caches (% used)
Active / Total Size (% used)
Minimum / Average / Maximum Object
:
:
:
:
:
4692768 / 4751161 (98.8%)
129083 / 129083 (100.0%)
71 / 109 (65.1%)
729966.22K / 738277.47K (98.9%)
0.01K / 0.16K / 8.00K
OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME
3565575 3565575 100%
0.10K 91425
39
365700K buffer_head
314916 314066 99%
0.19K 14996
21
59984K dentry
184192 183751 99%
0.06K
2878
64
11512K kmalloc-64
138618 138618 100%
0.94K
4077
34
130464K xfs_inode
138602 138602 100%
0.21K
3746
37
29968K xfs_ili
102116 99012 96%
0.55K
3647
28
58352K radix_tree_node
97482 49093 50%
0.09K
2321
42
9284K kmalloc-96
22695 20777 91%
0.05K
267
85
1068K shared_policy_node
21312 21312 100%
0.86K
576
37
18432K ext4_inode_cache
16288 14601 89%
0.25K
509
32
4072K kmalloc-256
[…]
pcstat •  Show page cache residency by file:
# ./pcstat data0*
|----------+----------------+------------+-----------+---------|
| Name
| Size
| Pages
| Cached
| Percent |
|----------+----------------+------------+-----------+---------|
| data00
| 104857600
| 25600
| 25600
| 100.000 |
| data01
| 104857600
| 25600
| 25600
| 100.000 |
| data02
| 104857600
| 25600
| 4080
| 015.938 |
| data03
| 104857600
| 25600
| 25600
| 100.000 |
| data04
| 104857600
| 25600
| 16010
| 062.539 |
| data05
| 104857600
| 25600
| 0
| 000.000 |
|----------+----------------+------------+-----------+---------|
•  Uses the mincore(2) syscall. Useful for database
performance analysis.
perf_events •  Provides the "perf" command
•  In Linux source code: tools/perf
–  Usually pkg added by linux-tools-common, etc.
•  Multi-tool with many capabilities
–  CPU profiling
–  PMC profiling
–  Static & dynamic tracing
•  Covered later in Profiling & Tracing
Where do you start?...and stop? 2. Methodologies An#-­‐Methodologies •  The lack of a deliberate methodology…
•  Street Light Anti-Method:
–  1. Pick observability tools that are
•  Familiar
•  Found on the Internet
•  Found at random
–  2. Run tools
–  3. Look for obvious issues
•  Drunk Man Anti-Method:
–  Tune things at random until the problem goes away
Methodologies • 
• 
• 
• 
• 
• 
Linux Performance Analysis in 60 seconds
The USE method
CPU Profile Method
Resource Analysis
Workload Analysis
Others include:
– 
– 
– 
– 
– 
– 
Workload characterization
Drill-down analysis
Off-CPU analysis
Static performance tuning
5 whys
…
Linux Perf Analysis in 60s 1.  uptime
2.  dmesg | tail
3.  vmstat 1
4.  mpstat -P ALL 1
5.  pidstat 1
6.  iostat -xz 1
7.  free -m
8.  sar -n DEV 1
9.  sar -n TCP,ETCP 1
10.  top
Linux Perf Analysis in 60s 1.  uptime
2.  dmesg | tail
3.  vmstat 1
4.  mpstat -P ALL 1
5.  pidstat 1
6.  iostat -xz 1
7.  free -m
8.  sar -n DEV 1
9.  sar -n TCP,ETCP 1
10.  top
load averages kernel errors overall stats by Gme CPU balance process usage disk I/O memory usage network I/O TCP stats check overview hTp://techblog.neVlix.com/2015/11/linux-­‐performance-­‐analysis-­‐in-­‐60s.html The USE Method •  For every resource, check:
1. 
2. 
3. 
Utilization
Saturation
Errors
X Resource UGlizaGon (%) •  Definitions:
–  Utilization: busy time
–  Saturation: queue length or queued time
–  Errors: easy to interpret (objective)
•  Helps if you have a functional (block) diagram of your
system / software / environment, showing all resources
Start with the questions, then find the tools
USE Method for Hardware •  For every resource, check:
1. 
2. 
3. 
Utilization
Saturation
Errors
•  Including busses & interconnects
(hTp://www.brendangregg.com/USEmethod/use-­‐linux.html) CPU Profile Method 1.  Take a CPU profile
2.  Understand all software in profile > 1%
•  Discovers a wide range of issues by their CPU usage
–  Directly: CPU consumers
–  Indirectly: initialization
of I/O, locks, times, ...
•  Narrows target of study
to only its running
components
Flame Graph Resource Analysis •  Typical approach for system performance analysis:
begin with system tools & metrics
Workload •  Pros:
–  Generic
–  Aids resource
perf tuning
ApplicaGon Libraries System •  Cons:
–  Uneven coverage
–  False positives
System Calls Kernel Hardware Analysis Workload Analysis •  Begin with application metrics & context
•  Pros:
–  Accurate, proportional metrics
–  App context
•  Cons:
–  App specific
–  Difficult to dig from
app to resource
Workload ApplicaGon Libraries System System Calls Kernel Hardware Analysis 3. Benchmarking ~100% of benchmarks are
wrong
Benchmarking •  Apart from observational analysis, benchmarking is a
useful form of experimental analysis
–  Try observational first; benchmarks can perturb
•  However, benchmarking is error prone:
–  Testing the wrong target: eg, FS cache instead of disk
–  Choosing the wrong target: eg, disk instead of FS cache
… doesn’t resemble real world usage
–  Invalid results: eg, bugs
–  Misleading results: you benchmark A, but actually measure B,
and conclude you measured C
•  The energy needed to refute benchmarks is multiple
orders of magnitude bigger than to run them
Benchmark Examples •  Micro benchmarks:
–  File system maximum cached read operations/sec
–  Network maximum throughput
•  Macro (application) benchmarks:
–  Simulated application maximum request rate
•  Bad benchmarks:
–  gitpid() in a tight loop
–  Context switch timing
The Benchmark Paradox •  Benchmarking is used for product evaluations
–  Eg, evaluating cloud vendors
•  The Benchmark Paradox:
–  If your product’s chances of winning a benchmark are 50/50,
you’ll usually lose
–  http://www.brendangregg.com/blog/2014-05-03/the-benchmark-paradox.html
•  Solving this seeming paradox (and benchmarking in
general)…
For any given benchmark result,
ask:
why isn’t it 10x?
AcGve Benchmarking •  Root cause performance analysis while the benchmark is
still running
–  Use the earlier observability tools
–  Identify the limiter (or suspected limiter) and include it with the
benchmark results
–  Answer: why not 10x?
•  This takes time, but uncovers most mistakes
4. Profiling Profiling •  Can you do this?
“As an experiment to investigate the performance of the
resulting TCP/IP implementation ... the 11/750 is CPU
saturated, but the 11/780 has about 30% idle time. The time
spent in the system processing the data is spread out among
handling for the Ethernet (20%), IP packet processing
(10%), TCP processing (30%), checksumming (25%), and
user system call handling (15%), with no single part of the
handling dominating the time in the system.”
Profiling •  Can you do this?
“As an experiment to investigate the performance of the
resulting TCP/IP implementation ... the 11/750 is CPU
saturated, but the 11/780 has about 30% idle time. The time
spent in the system processing the data is spread out among
handling for the Ethernet (20%), IP packet processing
(10%), TCP processing (30%), checksumming (25%), and
user system call handling (15%), with no single part of the
handling dominating the time in the system.”
– Bill Joy, 1981, TCP-­‐IP Digest, Vol 1 #6 hTps://www.rfc-­‐editor.org/rfc/museum/tcp-­‐ip-­‐digest/tcp-­‐ip-­‐digest.v1n6.1 perf_events •  Introduced earlier: multi-tool, profiler. Provides "perf".
usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
The most commonly
annotate
archive
bench
buildid-cache
buildid-list
data
diff
evlist
inject
kmem
kvm
list
lock
mem
record
report
sched
script
stat
test
timechart
top
trace
probe
used perf commands are:
Read perf.data (created by perf record) and display annotated code
Create archive with object files with build-ids found in perf.data file
General framework for benchmark suites
Manage build-id cache.
List the buildids in a perf.data file
Data file related processing
Read perf.data files and display the differential profile
List the event names in a perf.data file
Filter to augment the events stream with additional information
Tool to trace/measure kernel memory(slab) properties
Tool to trace/measure kvm guest os
List all symbolic event types
Analyze lock events
Profile memory accesses
Run a command and record its profile into perf.data
Read perf.data (created by perf record) and display the profile
Tool to trace/measure scheduler properties (latencies)
Read perf.data (created by perf record) and display trace output
Run a command and gather performance counter statistics
Runs sanity tests.
Tool to visualize total system behavior during a workload
System profiling tool.
strace inspired tool
Define new dynamic tracepoints
See 'perf help COMMAND' for more information on a specific command.
perf_events: CPU profiling •  Sampling full stack traces at 99 Hertz, for 30 secs:
# perf record -F 99 -ag -- sleep 30
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.745 MB perf.data (~119930 samples) ]
# perf report -n --stdio
1.40%
162
java [kernel.kallsyms]
[k] _raw_spin_lock
|
--- _raw_spin_lock
|
|--63.21%-- try_to_wake_up
|
|
|
|--63.91%-- default_wake_function
|
|
|
|
|
|--56.11%-- __wake_up_common
|
|
|
__wake_up_locked
|
|
|
ep_poll_callback
|
|
|
__wake_up_common
|
|
|
__wake_up_sync_key
|
|
|
|
|
|
|
|--59.19%-- sock_def_readable
[…78,000 lines truncated…]
perf_events: Full "report" Output … as a Flame Graph perf_events: Flame Graphs git clone --depth 1 https://github.com/brendangregg/FlameGraph
cd FlameGraph
perf record -F 99 -a –g -- sleep 30
perf script | ./stackcollapse-perf.pl |./flamegraph.pl > perf.svg
•  Flame Graphs:
–  x-axis: alphabetical stack sort, to maximize merging
–  y-axis: stack depth
–  color: random, or hue can be a dimension (eg, diff)
•  Interpretation:
–  top edge is on-CPU, beneath it is ancestry
•  Easy to get working
–  http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html
•  Also in Mar/Apr issue of ACMQ
•  The first ever flame graph was generated for MySQL
•  This background is the output of a DTrace CPU profile,
which only printed unique stacks with counts
Size of one stack st
1 Flame Graph: MySQL … same data perf_events: Workflow list events count events perf list
perf stat
capture stacks perf record
Typical Workflow perf.data text UI dump profile perf report
flame graph visualizaGon perf script
stackcollapse-perf.pl
flamegraph.pl
perf_events: Counters •  Performance Monitoring Counters (PMCs):
$ perf list | grep –i hardware
cpu-cycles OR cycles
stalled-cycles-frontend OR idle-cycles-frontend
stalled-cycles-backend OR idle-cycles-backend
instructions
[…]
branch-misses
bus-cycles
L1-dcache-loads
L1-dcache-load-misses
[…]
rNNN (see 'perf list --help' on how to encode it)
mem:<addr>[:access]
[Hardware
[Hardware
[Hardware
[Hardware
event]
event]
event]
event]
[Hardware
[Hardware
[Hardware
[Hardware
event]
event]
cache event]
cache event]
[Raw hardware event …
[Hardware breakpoint]
•  Identify CPU cycle breakdowns, esp. stall types
•  PMCs not enabled by-default in clouds (yet)
•  Can be time-consuming to use (CPU manuals)
5. Tracing Linux Event Sources Tracing Stack add-­‐on tools: trace-cmd, perf-­‐tools, bcc, … front-­‐end tools: tracing frameworks: back-­‐end instrumentaGon: perf jrace, perf_events, BPF tracepoints, kprobes, uprobes in Linux jrace •  Added by Steven Rostedt and others since 2.6.27
–  CONFIG_FTRACE, CONFIG_FUNCTION_PROFILER, …
–  See Linux source: Documentation/trace/ftrace.txt
–  A collection of powerful features, good for hacking
•  Use directly via /sys/kernel/debug/tracing (not easy):
linux-4.0.0+# ls /sys/kernel/debug/tracing/
available_events
max_graph_depth
available_filter_functions options
available_tracers
per_cpu
buffer_size_kb
printk_formats
[…]
stack_max_size
stack_trace
stack_trace_filter
trace
•  Or via front-ends:
–  Steven's trace-cmd
–  my perf-tools: iosnoop, iolatency, funccount, kprobe, …
jrace: perf-­‐tools iosnoop •  Block I/O (disk) events with latency:
# ./iosnoop –ts
Tracing block I/O. Ctrl-C to end.
STARTs
ENDs
COMM
5982800.302061 5982800.302679 supervise
5982800.302423 5982800.302842 supervise
5982800.304962 5982800.305446 supervise
5982800.305250 5982800.305676 supervise
[…]
PID
1809
1809
1801
1801
TYPE
W
W
W
W
DEV
202,1
202,1
202,1
202,1
BLOCK
17039600
17039608
17039616
17039624
BYTES LATms
4096
0.62
4096
0.42
4096
0.48
4096
0.43
# ./iosnoop –h
USAGE: iosnoop [-hQst] [-d device] [-i iotype] [-p PID] [-n name] [duration]
-d device
# device string (eg, "202,1)
-i iotype
# match type (eg, '*R*' for all reads)
-n name
# process name to match on I/O issue
-p PID
# PID to match on I/O issue
-Q
# include queueing time in LATms
-s
# include start time of I/O (s)
-t
# include completion time of I/O (s)
-h
# this usage message
duration
# duration seconds, and use buffers
[…]
jrace: perf-­‐tools iolatency •  Block I/O (disk) latency distributions:
# ./iolatency
Tracing block I/O. Output every 1 seconds. Ctrl-C to end.
>=(ms)
0
1
2
4
8
..
->
->
->
->
->
<(ms)
1
2
4
8
16
:
:
:
:
:
:
I/O
2104
280
2
0
202
|Distribution
|
|######################################|
|######
|
|#
|
|
|
|####
|
>=(ms)
0
1
2
4
8
16
32
[…]
..
->
->
->
->
->
->
->
<(ms)
1
2
4
8
16
32
64
:
:
:
:
:
:
:
:
I/O
1144
267
10
5
248
601
117
|Distribution
|
|######################################|
|#########
|
|#
|
|#
|
|#########
|
|####################
|
|####
|
jrace: perf-­‐tools funccount •  Count a kernel function call rate:
# ./funccount -i 1 'bio_*'
Tracing "bio_*"... Ctrl-C to end.
FUNC
bio_attempt_back_merge
bio_get_nr_vecs
bio_alloc
bio_alloc_bioset
bio_endio
bio_free
bio_fs_destructor
bio_init
bio_integrity_enabled
bio_put
bio_add_page
COUNT
26
361
536
536
536
536
536
536
536
729
1004
Counts are in-­‐kernel, for low overhead [...]
–  -i: set an output interval (seconds), otherwise until Ctrl-C
jrace: perf-­‐tools uprobe •  Dynamically trace user-level functions; eg, MySQL:
# ./uprobe 'p:dispatch_command /opt/mysql/bin/mysqld:_Z16dispatch_command19enum_server_commandP3THDPcj
+0(%dx):string'
Tracing uprobe dispatch_command (p:dispatch_command /opt/mysql/bin/mysqld:0x2dbd40 +0(%dx):string).
Ctrl-C to end.
mysqld-2855 [001] d... 19956674.509085: dispatch_command: (0x6dbd40) arg1="show tables"
mysqld-2855 [001] d... 19956675.541155: dispatch_command: (0x6dbd40) arg1="SELECT * FROM
numbers where number > 32000"
–  Filter on string match; eg, "SELECT":
# ./uprobe 'p:dispatch_command /opt/mysql/bin/mysqld:_Z16dispatch_command19enum_server_commandP3THDPcj
cmd=+0(%dx):string' 'cmd ~ "SELECT*"'
Tracing uprobe dispatch_command (p:dispatch_command /opt/mysql/bin/mysqld:0x2dbd40 cmd=
+0(%dx):string). Ctrl-C to end.
mysqld-2855 [001] d... 19956754.619958: dispatch_command: (0x6dbd40) cmd="SELECT * FROM
numbers where number > 32000"
mysqld-2855 [001] d... 19956755.060125: dispatch_command: (0x6dbd40) cmd="SELECT * FROM
numbers where number > 32000"
•  Ok for hacking, but not friendly; need perf_events/BPF
perf_events •  Powerful profiler (covered earlier) and tracer:
– 
– 
– 
– 
User-level and kernel dynamic tracing
Kernel line tracing and local variables (debuginfo)
Kernel filtering expressions
Efficient in-kernel counts (perf stat)
•  Intended as the official Linux tracer/profiler
•  Becoming more programmable with BPF support (2016)
–  Search lkml for "perf" and "BPF"
perf_events: LisGng Events # perf list
cpu-cycles OR cycles
instructions
cache-references
cache-misses
branch-instructions OR branches
[…]
skb:kfree_skb
skb:consume_skb
skb:skb_copy_datagram_iovec
net:net_dev_xmit
net:net_dev_queue
net:netif_receive_skb
net:netif_rx
[…]
block:block_rq_abort
block:block_rq_requeue
block:block_rq_complete
block:block_rq_insert
block:block_rq_issue
block:block_bio_bounce
block:block_bio_complete
[…]
[Hardware
[Hardware
[Hardware
[Hardware
[Hardware
event]
event]
event]
event]
event]
[Tracepoint
[Tracepoint
[Tracepoint
[Tracepoint
[Tracepoint
[Tracepoint
[Tracepoint
event]
event]
event]
event]
event]
event]
event]
[Tracepoint
[Tracepoint
[Tracepoint
[Tracepoint
[Tracepoint
[Tracepoint
[Tracepoint
event]
event]
event]
event]
event]
event]
event]
perf_events: Tracing Tracepoints #
[
[
#
perf
perf
perf
perf
record -e block:block_rq_complete -a sleep 10
record: Woken up 1 times to write data ]
record: Captured and wrote 0.428 MB perf.data (~18687 samples) ]
script
run 30339 [000] 2083345.722767: block:block_rq_complete: 202,1 W () 12984648
run 30339 [000] 2083345.722857: block:block_rq_complete: 202,1 W () 12986336
run 30339 [000] 2083345.723180: block:block_rq_complete: 202,1 W () 12986528
swapper
0 [000] 2083345.723489: block:block_rq_complete: 202,1 W () 12986496
swapper
0 [000] 2083346.745840: block:block_rq_complete: 202,1 WS () 1052984
supervise 30342 [000] 2083346.746571: block:block_rq_complete: 202,1 WS () 1053128
supervise 30342 [000] 2083346.746663: block:block_rq_complete: 202,1 W () 12986608
run 30342 [000] 2083346.747003: block:block_rq_complete: 202,1 W () 12986832
[...]
+
+
+
+
+
+
+
+
8 [0]
8 [0]
8 [0]
8 [0]
144 [0]
8 [0]
8 [0]
8 [0]
•  If -g is used in "perf record", stack traces are included
•  If "perf script" output is too verbose, try "perf report",
or making a flame graph
BPF •  Enhanced Berkeley Packet Filter, now just "BPF"
–  Enhancements added in Linux 3.15, 3.19, 4.1, 4.5, …
•  Provides programmatic tracing
–  measure latency, custom histograms, …
System dashboards of 2017+ should look very different
BPF: bcc ext4slower •  ext4 operations slower than the threshold:
# ./ext4slower 1
Tracing ext4 operations
TIME
COMM
06:49:17 bash
06:49:17 cksum
06:49:17 cksum
06:49:17 cksum
06:49:17 cksum
06:49:17 cksum
06:49:17 cksum
06:49:17 cksum
06:49:17 cksum
[…]
slower
PID
3616
3616
3616
3616
3616
3616
3616
3616
3616
than 1 ms
T BYTES
R 128
R 39552
R 96
R 96
R 10320
R 65536
R 55400
R 36792
R 15008
OFF_KB
0
0
0
0
0
0
0
0
0
LAT(ms)
7.75
1.34
5.36
14.94
6.82
4.01
8.77
16.34
19.31
FILENAME
cksum
[
2to3-2.7
2to3-3.4
411toppm
a2p
ab
aclocal-1.14
acpi_listen
•  Better indicator of application pain than disk I/O
•  Measures & filters in-kernel for efficiency using BPF
–  https://github.com/iovisor/bcc
BPF: bcc tools (early 2016) 6. Tuning Ubuntu Trusty Tuning: Early 2016 (1/2) • 
• 
• 
• 
• 
CPU
schedtool –B PID
disable Ubuntu apport (crash reporter)
also upgrade to Xenial (better HT scheduling)
Virtual Memory
vm.swappiness = 0
# from 60
kernel.numa_balancing = 0 # temp workaround
Huge Pages
echo never > /sys/kernel/mm/transparent_hugepage/enabled
File System
vm.dirty_ratio = 80
# from 40
vm.dirty_background_ratio = 5
# from 10
vm.dirty_expire_centisecs = 12000
# from 3000
mount -o defaults,noatime,discard,nobarrier …
Storage I/O
/sys/block/*/queue/rq_affinity
2
/sys/block/*/queue/scheduler
noop
/sys/block/*/queue/nr_requests
256
Ubuntu Trusty Tuning: Early 2016 (2/2) • 
• 
• 
Storage (continued)
/sys/block/*/queue/read_ahead_kb 256
mdadm –chunk=64 …
Networking
net.core.somaxconn = 1000
net.core.netdev_max_backlog = 5000
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_wmem = 4096 12582912 16777216
net.ipv4.tcp_rmem = 4096 12582912 16777216
net.ipv4.tcp_max_syn_backlog = 8096
net.ipv4.tcp_slow_start_after_idle = 0
net.ipv4.tcp_tw_reuse = 1
net.ipv4.ip_local_port_range = 10240 65535
net.ipv4.tcp_abort_on_overflow = 1
# maybe
Hypervisor (Xen)
echo tsc > /sys/devices/…/current_clocksource
Plus PVHVM (HVM), SR-IOV, …
Summary A brief discussion of 6 facets of Linux performance:
1. 
2. 
3. 
4. 
5. 
6. 
Observability
Methodologies
Benchmarking
Profiling
Tracing
Tuning
Takeaways Some things to print out for your office wall:
1. 
2. 
3. 
4. 
5. 
6. 
7. 
8. 
9. 
10. 
uptime
dmesg -T | tail
vmstat 1
mpstat -P ALL 1
pidstat 1
iostat -xz 1
free -m
sar -n DEV 1
sar -n TCP,ETCP 1
top
More Links •  Netflix Tech Blog on Linux:
• 
• 
http://techblog.netflix.com/2015/11/linux-performance-analysis-in-60s.html
http://techblog.netflix.com/2015/08/netflix-at-velocity-2015-linux.html
•  Linux Performance:
• 
http://www.brendangregg.com/linuxperf.html
•  Linux perf_events:
• 
• 
https://perf.wiki.kernel.org/index.php/Main_Page
http://www.brendangregg.com/perf.html
•  Linux ftrace:
• 
• 
https://www.kernel.org/doc/Documentation/trace/ftrace.txt
https://github.com/brendangregg/perf-tools
•  USE Method Linux:
• 
http://www.brendangregg.com/USEmethod/use-linux.html
•  Flame Graphs:
• 
• 
http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html
http://queue.acm.org/detail.cfm?id=2927301
Thanks • 
• 
• 
• 
• 
Questions?
http://slideshare.net/brendangregg
http://www.brendangregg.com
[email protected]
@brendangregg