2004 Hoyt Catalog

2004 Hoyt USA Compound Bows
ViperTec
40-80#
40-80#
Draw weight
(Hunting)
32”
35 1⁄2”
Axle to axle
XT 1000
Limb
XTEC
Bow
XT 1000
XT 2000
33”
40-80#
30-80#
SuperTec
XT 2000
35”
40-80#
30-80#
UltraTec
XT 2000
37 1⁄2”
40-80#
30-80#
XT 3000
40 1⁄2”
40-80#
30-80#
XT 2000
38”
40-80#
30-80#
ProTec
XT 3000
41 1⁄2”
40-80#
30-80#
LX Pro
47 1⁄2”
40-80#
30-80#
XT 2000
38”
40-80#
30-80#
UltraElite
XT 3000
41”
40-80#
30-80#
LX Pro
47”
40-80#
30-80#
XT 2000
38”
40-80#
30-80#
ProElite
UltraMag UltraSport
20-50#
30-80#
Draw weight
(Target)
30-80#
RazorTec
DynaTec
Banshee
Wheel
16-23”
Cam & 1/2 Cam & 1/2 Cam & 1/2
Cam & 1/2 Cam & 1/2 Cam & 1/2 Cam & 1/2 Cam & 1/2 Cam & 1/2 Cam & 1/2
25-31”
25-31”
26-32”
25-31”
26-32”
26-32”
27-33”
Eccentric
Spiral
29-35”
28-34”
29-35” Cam & 1/2 Cam & 1/2 Cam & 1/2 Cam & 1/2 Cam & 1/2
Cam
&
1/2
Cam & 1/2 Cam & 1/2 Cam & 1/2 Cam
& 1/2
options &
Spiral
Spiral
Spiral
Spiral
25-31”
27-33” AccuWheel
24-30”
24-30”
24-30”
23-28”
25-28”
24-30”
24-30”
23-30”
draw lengths
Cam & 1/2 Cam & 1/2 AccuWheel Cam & 1/2 Cam & 1/2 AccuWheel
25-33”
24-31”
25-33”
25-31”
26-33”
26-33”
28-34”
XT 3000
41 1⁄2”
40-80#
30-80#
LX Pro
47”
40-80#
30-80#
SierraTec
XT 2000
33”
30-60#
30-60#
XT 3000
36”
30-60#
30-60#
ZR 100
32 1⁄2”
40-80#
N/A
XT 2000
36”
40-80#
30-80#
ZR 100
36”
40-80#
30-80#
Spiral
Spiral
Spiral
Cam & 1/2 Cam & 1/2 Cam & 1/2
25-31”
26-33”
26-33”
Catalog Pg. #
2
3
4
5
6
6
7
7
7
8
8
8
8
8
8
9
9
9
10
10
Banshee
Banshee
32”
20-50#
BC
2004 Hoyt USA Recurve Bows
Bow
AeroTec
13
13
Catalog Page #
64”
66”
Short Limb
66”
68”
Medium Limb
68”
70”
Long Limb
Short
Riser
Long
Riser
Riser
Matrix
Long
Riser
Gold
Medalist
66”
64”
68”
66”
70”
68”
Long
Riser
Short
Riser
70”
68”
66”
13
13
Hoyt USA is proud to sponsor SCI, “First for Hunters”
because we are committed
to protecting our rights to
hunt and passing the hunting tradition on to future generations. SCI protects
hunter’s rights by actively lobbying on behalf of
hunters at a state, provincial and federal level.
SCI promotes strong family values and teaches young
hunters about hunting and the role hunters play in
sustainable wildlife conservation. Please consider
joining SCI, “First for Hunters” today to ensure that
yours and your children’s hunting rights are protected.
13
2004 Hoyt USA
Recurve Limbs
22-50#
22-50#
Edge
24-50#
24-50#
24-50#
Kinetic
24-50#
24-50#
24-50#
Vector
32-50#
36-50#
40-50#
FX
34-50#
34-50#
G3
Medium
Short
Long
34-50#
22-50#
Visit www.scifirstforhunters.org
or call 888-SCI-HUNT.
To order The Drury Video and DVD
Collection direct, call 1-800-990-9351 or
visit them at www.druryoutdoors.com.
G
et your young archer or bowhunter started right with the Hoyt
Banshee. It’s powerful yet very easy to shoot and comes standard
with an adjustable draw length module allowing the draw length
to be increased as your son or daughter grows. Ensure the future of
archery, ask your dealer about the Hoyt Banshee today.
Limb
Banshee
Banshee™
Axle to axle:
32”
16-23”
235 fps
Banshee Wheel
I.B.O. Speeds based on 45 lb. 24” draw.
“Hoyt’s Cam & 1/2 Performance System
was the deciding factor for me to switch to
Hoyt product. Never before have I shot a
bow that’s as smooth, fast, forgiving and
quiet as a new Cam & 1/2 System bow! It
truly is remarkable!”
To order the Cianciarulo’s videos direct,
call 815-493-8998 or visit them on the
web at www.archerschoice.com.
To order Gary Bogner’s videos direct,
call 1-888-423-4868, or visit them at
www.arrowheadadventures.net.
Standard
Configuration:
Reflex geometry: 1⁄2”
Axle to axle: 32”
Brace height: 6 1⁄2”
Draw weight (H): 25, 45#
Draw weight(T): 25, 45#
Mass weight: 2 lb. 10 oz.
Dr. Warren Strickland
Hoyt USA Compound Bow Lifetime Warranty
All Hoyt USA compound bows are guaranteed against defects in
materials or workmanship to the original owner on all risers, limbs,
limb pockets, and eccentrics for the life of the product*.
REALTREE®
HD GREEN™
543 N. Neil Armstrong Rd. • Salt Lake City, Utah • 84116-2887
Phone (801) 363-2990 • Fax (801) 537-1470
Visit our Web site for the latest news, contests and product information. www.hoytusa.com
*For warranty on other components please see warranty policy in owner’s manual. For warranty
on Sims® Limb Savers and String Leeches please contact Sims Vibration Laboratory directly.
Hoyt USA Recurve Bow Lifetime Warranty
Hoyt USA recurve handles are guaranteed against defects in materials
and workmanship to the original owner for the life of the product*.
BLACK
RED
BLUE
Note: At the time of production of our Product Guide 2004, the bows, limbs, cams, color options, and all other accessories shown, and the
information contained had been thoroughly checked for accuracy. However, in the event that a typographical error was missed, Hoyt
USA reserves the right to notify our dealers and customers at its discretion. Additionally, Hoyt USA, reserves the rights to modify, change
or discontinue products shown in this publication without notice.
*For limb warranty and other components please see warranty policy in owner’s manual.
1931 Hoyt Archery Company forms as a partnership between Earl Hoyt Sr. and Earl Hoyt Jr.
1946 Hoyt pioneers the use of reinforced plastics in bow production.
1948 Hoyt introduces the first overdraw and semi-pistol grip bows to the market.
1951 The deflex-reflex principle of designs is incorporated into Hoyt recurve bow production.
This is the first radical departure from traditional design and continues to be used in all topline recurve bows today.
1953 Hoyt produces the first truly short recurve hunting bow, only 52 inches.
1956 Hoyt introduces dynamically balanced bow limbs, providing for a new dimension in
accuracy. (Patent #2,995,130).
1931
1946
1948
1951
1953
1956
A true Pistol Grip (Patent No. 2,995,130) is introduced on the Pro Olympian. Since its introduction, the pistol grip has become the most universally popular and distinctive conformation of the modern bow.
1957 Hoyt craftsmen offer the first exquisitely customized bows – checkering and inlays.
1959 The thumb rest grip design is introduced improving the “feel” of the bow. Virtually all
modern bows utilize this style of grip today.
1961 Hoyt invents stabilizers and introduces them to the archery market. (Patent #3,196,860).
1963 Hoyt develops the micro rest adjustment system, dramatically improving the tuneability
of bows and substantially increasing accuracy. (Patent #3,292,607).
1957
1959
1961
1963
1965 Hoyt develops the Torque Flight Compensator stabilizer system further improving
accuracy. (Patent #3,412,725).
1965
1971 Hoyt introduces the first limbs made with carbon fiber.
1971
1972
1972 A bow limb Take-Down System is invented, accurately positioning, aligning, and
locking the bow limbs into the sockets of the riser. (Patent #3,814,075).
“1972 Munich Olympic Games” - The Munich Olympic Games are the first Olympics in
which archery is reintroduced as an Olympic sport since the 1904 games held in St. Louis,
MO. The Hoyt Pro Medalist is used to win both the men’s and women’s gold medal.
1976 V-bar auxiliary inertial stabilizers are introduced. (Patent #4,054,121).
1976
“1976 Montreal Olympic Games” - Hoyt’s TD2 is used to win the men’s gold medal.
Hoyt develops a system for universally adjusting bow limbs for variations in bow weight,
tiller, and alignment. (Patent #4,091,790).
1980 “Moscow Olympic Games” - Men’s gold won with Hoyt’s TD2.
1982 An adjustment system for fine tuning the cable harness of two-wheel type compound
bows is developed. (Patent #4,448,183). This is the beginning of Hoyt Archery Company’s
entrance to the compound bow market.
1980
1982
Hoyt designs a cable glide block to retain the cables of a compound bow on the arrow side of
the cable guard rod, maximizing off-set clearance of the arrow and vanes. (Patent #4,452,222).
Hoyt develops the interior socket and dovetail channels for recurve risers. (Patent #4,494,521)
Hoyt invents a vertically adjustable arrow support member with an internally adjustable
spring loaded cushion plunger. This allowed for finer tuning of bows. (Patent No. 4,542,731)
“1984 Los Angeles Olympic Games” - Men’s gold medal is won with the Hoyt TD4.
1984
1984 Hoyt introduces the first true working recurve limb compound bow, the Spectra 5000.
Hoyt designs a bow for Sylvester Stallone to be used in the movie, Rambo-First Blood, Part II.
By the end of 1985, the Hoyt bow and promotion is the most talked about campaign ever seen
in the industry.
Hoyt develops Syntactic foam core limbs replacing wood cores. The foam is used in both
recurve and some early compound bow limbs and continues to be used in recurve limbs today.
(Patent #4,819,608).
1987 Hoyt develops and patents the use of synthetic cables and strings to replace the metal
cable harness. This is known as the A.I.M. system (Advanced Integrated Material) and is used
on almost all compound bows in the market today. (Patent #4,957,094).
1987
Hoyt expands its manufacturing capabilities by designing semi-automated string making
equipment and begins in-house production of bow strings.
1988 Hoyt introduces the Compound Speed Changer System, a portable bow press system
allowing archers to work on or dismantle a bow without the use of a bow press. (Patent
#4,846,142).
1988
“1988 Seoul Olympic Games” - The Hoyt TD4 wins the men’s gold, silver and bronze medals.
1989 Randy Walk, Hoyt’s Director of Engineering, shatters the existing NAA World
Broadhead Flight (distance) record by 120 yards in the 70 lb. bow class with a Hoyt ProForce
Extreme. Roy Rogers also sets a new world record in the unlimited weight division with his
ProForce Extreme set at 140 pounds.
1989
Hoyt USA redefines compound limb design and construction by introducing the Fast Flite
limb, a fully laminated multi-glass compound limb. This new limb technology dramatically
increases the speed and durability of compound bows.
1992 The Year of the Super Slam!
Hoyt introduces the Super Slam bow, designed with Hoyt’s first ever directly mounted 2-piece
quiver system. The bow was appropriately named after Chuck Adams’ recent success in being
the first bowhunter in history to take all 27 species of North American Big Game with a bow
and arrow, now known as the “Super Slam” of hunting.
1992
“1992 Barcelona Olympic Games:” - The Spanish men’s team wins the Olympic Gold medal,
all shooting Hoyt TD-4 bows.
1993 Hoyt USA expands its manufacturing capabilities with the purchase of a CNC milling
machine. Hoyt USA now has one of the largest milling machine shops in the state of Utah.
1993
1994 The first ever Hoyt USA machined aluminum compound and recurve bow risers are
introduced to the market.
1994
Randy Walk invents a unique grip system for machined aluminum risers known as the
Accu-Grip (Patent #5,551,413).
1996 A Year of Innovation!
Hoyt develops the first TEC Series bow named the AlphaTec. The first of its kind riser design
uses a fully integrated rear support beam dramatically increasing the strength of the bow and
substantially reducing riser vibration and shock. (Patent #5,682,871 - Inventors Randy Walk
and Bill Boynton).
Hoyt invents Split Limb Technology and introduces the Carbonite split limbs. The 4 independent limbs have redefined the performance, durability and look of all Hoyt bows today.
(Patent #5,720,267 – Inventor Randy Walk).
Further innovation is defined with the introduction of the dual chambered-suppression
stabilizer. (Patent #5,735,257 – Inventor Randy Walk).
1996
When you purchase a Hoyt bow, you’re not only purchasing the finest bow money can buy, you’re also purchasing
over seven decades of archery research, development and
innovation. It is an incredible history unmatched by any
other bow manufacturer that has ever existed. When it
comes to archery, trust the name that millions have trusted
for over seventy years!
Hoyt introduces the Avalon, the most fully adjustable recurve riser ever produced. The
unique limb attachment system and adjustable pockets allow archers to tune their bows more
accurately and easier than before.
“1996 Atlanta Olympic Games” - The Hoyt Avalon wins the men’s gold medal.
Hoyt expands its manufacturing capabilities by installing a camouflage film dipping system.
1998 The TEC-series (Total Engineering Concept) of bows are expanded to include 3
extremely different bows all produced for different styles of shooting.
1998
1999 Hoyt introduces the MagnaTec, a TEC-series bow design made of diecast magnesium
rather than machined from aluminum. This is another first in the industry and to date, no
other bow companies have been able to duplicate this technology.
1999
2000 Hoyt USA redefines the recurve bow and introduces the first ever TEC-series recurve
riser, the Axis. Along with the Axis introduction, Hoyt USA develops and puts into market
the revolutionary FX recurve limb.
2000
“2000 Sydney Olympic Games” - The Axis riser and FX limb combination wins the men’s
individual gold medal. The silver and bronze medals in the men’s division are also won with
Hoyt bows making for a complete Hoyt sweep.
Gary Bogner completes the Super Slam of bowhunting harvesting all 27 species of North
American big game animals with a Hoyt bow.
2001 TEC series risers are used on all but two bows in the Hoyt line.
2003 Hoyt introduces the Cam & 1/2 Performance System (patent pending) and revolutionizes the archery world.
2001
2003
Archery dealers from around the country vote the Cam & 1/2 Performance System as the best
product of 2003 at the ATA Show.
Hoyt’s President, Randy Walk, is inducted into the National Bowhunters Hall of Fame for his
bowhunting achievements and his excellence in design and manufacturing of archery products.
Five Hoyt shooters shooting the Cam & 1/2 Performance System set a new record for the number of perfect scores at the Vegas NFAA 3 day tournament. Hoyt shooter Chance Beaubouef wins.
Three Hoyt shooters using the Cam & 1/2 Performance System shoot perfect scores at the
NFAA National Championships and Chance Beaubouef wins with the Cam & 1/2 System.
Michael Braden, shooting the Cam & 1/2 System, becomes the first person in history to shoot
a perfect score during an NFAA 3D Tournament.
Tony Tazza wins the NFAA Atlantic City shoot using the Cam & 1/2 Performance System and
becomes only the second person in history to shoot a perfect 600.
Michael Braden, shooting the Cam & 1/2 System, is awarded the NFAA Shooter of the Year.
Dave Cousins and the Cam & 1/2 Performance System win the NFAA Marked 3D
Tournament and set a new tournament record.
The FITA World Archery Championships return to the United States for the first time in 20
years. The top 8 women finalists and 7 of the top 8 men’s finalists all shoot Hoyt TEC bows
with nearly 90% using the new Cam & 1/2 Performance System.
5 of the 6 medals won at the World Championships are won with Hoyt bows including a complete Cam & 1/2 System sweep in the women’s division.
Dave Cousins, shooting the Cam & 1/2 System, dominates the NFAA Field Archery
Championships and sets a new tournament record. Cousins’ win at this event solidifies a Hoyt
Cam & 1/2 System sweep in the Men’s Pro Divisions for every NFAA event held during the year.
Mary Zorn, shooting the Cam & 1/2 Performance System, sets a new World Record of 1401
and becomes the first woman in archery history to break the 1400 mark in a FITA event.
2004
2004 Hoyt introduces the new Triax Pocket Stabilization System
The UltraElite and ProElite Shoot-Thru bows are introduced to the Hoyt line and become the
first Shoot -Thru bows ever offered by Hoyt USA.
In its first year, the Cam & 1/2 Performance System™ (patent pending) has taken the archery world
by storm. Archers and bowhunters from all around the world continue to say the same thing…
“I’ve never shot better than with the Cam & 1/2 Performance System.” The Cam & 1/2 System
has set an unbelievable number of tournament and world records and is the first cam system
in history to win every single NFAA tournament in the men’s open pro division. Combining
the technologies of single and two cams into one cam system has truly created the most efficient
and effective cam system available. Shoot the Cam & 1/2 Performance System today and see for
yourself what all the excitement is about!
Hoyt introduces a new 3D Ribbing Technology for an exceptionally stronger and
lighter weight magnesium riser design.
You won’t find a more dedicated or passionate group of bowhunters and archers than the
employees of Hoyt USA. We live, breathe and love the sport!
Hoyt’s seven decades of innovation and long-term
stability as an archery company is a testament to the
commitment, dedication and passion of Hoyt employees,
both past and present. The focus of Hoyt has always been
to design and build products that are truly innovative,
and of the highest quality.
This commitment to excellence is driven from the
enthusiasm and passion for the sport that runs through
the veins of all Hoyt employees. One form of archery or
another is the number one hobby for most of us. If
we’re not at the factory designing, building and thinking about archery products, we’re in the field using
them. Whether it’s competing in a major target event,
stalking mule deer, rattling in a whitetail or bugling in
a bull elk, we are constantly looking for ways to make
our bows better.
Shoot-Thru
Series Bows
Through this passion and focus, many technological
advancements such as the Cam & 1/2 Performance
System, TEC risers, 3/4 Inch Split Limb Technology,
and the AIM string and cabling system have been introduced. It’s a never-ending journey to building the best
bows possible. That journey continues in 2004 with our
new Shoot-Thru designs, Triax Pocket Stabilization
System, and 3D Ribbing Technology.
With so many truly dedicated archery and bowhunting
enthusiasts at Hoyt USA, you can rest assured that we will
give you everything we have for another seven decades!
Good luck and good shooting!
Randy Walk
President – Hoyt USA
2003 Bowhunting Hall of Fame Inductee
Triax Pocket
Stabilization SysteM
3D ribbing technologY
Row 1: Mike Luper, Marketing Mgr;
Jason Fogg, Engineering Mgr; Jeff Howard, Sales Mgr.;
Steve Memmott, Director of Mfg; Row 2: Shane
Hodapp, Engineering; Pete Hansen, Cust. Service;
Gideon Jolley, Engineer; Darin Cooper, Engineer; Row
3: Brian Spencer, Production Planning; Paul Bambrick,
Engineering; Zak Kurtzhals, Engineer; Kevin Thomas,
Machining; Row 4: Robin Christensen, Maintenance;
Brandon Van Tassell, Cust. Service; Jon Crump, QC Mgr;
Lance Zobell, Assembly Mgr; Row 5: Shaun Hirst, Cust.
Service; Bryan Reed, Purchasing
Pictured from L to R:
Hoyt’s new innovative
Shoot-Thru Technology
increases the lateral stiffness and balance of the
riser. It provides for the
highest level of consistency
and accuracy and is sure to
change the way precision
is measured in archery.
Page
1
The new Triax Pocket Stabilization
System is machined into the aluminum riser increasing the breadth of
contact between the dowel and the
riser. It ensures superior alignment, the
tightest tolerances of
any system, and provides for exceptional
pocket strength and
stability.
We have taken magnesium to a whole new
level with our new 3D
Ribbing Technology.
This complex technology creates a much
stronger riser design
while reducing overall
mass weight. In fact, our
new magnesium risers
are the lightest we have
ever produced.
Team Hoyt
Chance Beaubouef
2003 ESPN Games: Randy Ulmer, Tim Gillingham,
Randy Hendrix, Ginger Hopwood
Tony Clem
Nathan Brooks
Brian Visco, Eric Griggs, Nathan Brooks
Randy Hendrix
Randy Ulmer
Tim Strickland
Jeremy Houston
Rodney Silvey
Alfredo Julian
Paul Reppond
Dwane Miinch
Jay Verzuh
Jim Dougherty
Bruce Cull
Dean Ashton
Shawn Ryan
Josh Sanden
Steve Chikato
Allen Conner
Eric Griggs
Levi Britton
Ron Rette
Troy Blackall
Ben Rogers, Michael Braden, Bobby Ketcher
Tony Tazza, John Horvath, Dale Jones
Jeff McNail
Casey Brooks
Jeff Fabry
Mark Hartman
Team Hoyt
Stephen & Grant Foster
Joe Jordan
Roy Roth
Bobby Ketcher
Metropolis, IL ASA 2003 Shooters
Erik Watts
Carolyn Duncan
Special thanks to Greg Nielsen for shooter photographs.
Wayne Carlton
Brian Brochu
Dan Quintana
Travis Turner
Tom Hoffman
Jeff Propst
Ron Gaines
Brett Foster
Carol Williamson
Anthony Dixon
Bob Ameen
Rick Lally
Mark Wannemuehler
June Montenegro
Michael Lake
Sealed
stainless steel
Ball Bearings
Top & Bottom
Cam & 1/2
Performance
System**
T
he new 35 1⁄2 inch XTEC™ may well be the finest piece of archery
equipment to ever hit the planet! It’s loaded from axle-to-axle with unbelievable bow technology. We have taken the TEC riser design one step
further by incorporating the new Triax Pocket Stabilization System,
which increases the breadth of contact between the dowel and the riser
providing for the strongest and most stable pocket and riser design on the
market. It’s powered by Hoyt’s revolutionary Cam & 1/2 Performance
System making for an incredibly fast, forgiving and quiet bow. If you’re a
serious bowhunter looking for a serious bow, shoot the XTEC today!
Sims®
Limb Savers
Dual Locking
Pocket System
RealTree ®
HD Green™
Flag
Hoyt’s
self-aligning
yoke system
Flame
ver Flame
Sil
Adjustable
Stainless Steel
Cable Guard Bar◊
Fade Red
TEC Riser Design
“To be the best you can be, you need the best
equipment out there. With Hoyt bows you can
rest assured that you are getting the best bow
money can buy. TEC riser design, 3/4 Inch
Split Limb Technology, incredibly engineered
pocket system and of course the revolutionary
Cam & 1/2 Performance System…nothing
compares to a Hoyt!”
Ralph Cianciarulo,
Co-Host of Archer’s Choice TV Show
e Purple
Fad
Fade Blue
pro cable
guard glide
Black
New Insulated
Grip Pad*
Thin Ergonomic
Grip Design
Brownell® D-75
Tri-Color Camo
Strings and Cables*
Stainless Steel
Stabilizer Bushing
Standard
Configuration:
Limb
XT 1000
XTec™
Axle to axle:
35 1⁄2”
Cam & 1/2
24-30”
310 fps
Cam & 1/2 available in
65% or 75% let-off.
Reflex geometry: 1 1⁄4”
Axle to axle: 35 1⁄2”
Brace height: 7”
Draw weight (H): 40-80#
Draw weight(T): 30-80#
Mass weight: 4 lb. 2 oz.
I.B.O. speeds based on 70 lb. 30” draw. For
performance based on your setup, see your
Hoyt dealer. (Bow manufactured under one
or more of the following patent numbers:
5,682,871; 5,720,267; 4,957,094, 5,505,185)
Sims® String
Leeches*
*Not available on target models. **Patent pending. ◊Target models only.
“I’ve carried Hoyt bows for more than a decade arrowing over 100 big game animals
including 70 different species. From sea level to 15,000 feet, from minus 40 to 110 degrees,
Hoyt bows have performed flawlessly with not one mechanical failure! Dependability?
That’s more than dependability, that’s excellence bordering on perfection.”
Gary Bogner, SCI President
inner-cam
Draw Length
Adjustment System
Stealth Draw
Dampener**
Page
2
Cam & 1/2
Performance
System**
Sealed
stainless steel
Ball Bearings
Top & Bottom
new 32 inch ViperTec™ epitomizes the old adage of
T“goodhe radical
things come in small packages”. The ViperTec’s longer riser
Sims®
Limb Savers
and shorter limb design allows for superior balance, an increased
sight window, and substantially reduced recoil for an unbelievably
smooth and quiet shot. The contoured lines machined throughout
the aluminum riser also make this bow look as good as it shoots. If
you’re a short bow fanatic, shoot the ViperTec today, the short bow
that’s sure to revolutionize the short bow category.
Dual Locking
Pocket System
Hoyt’s
self-aligning
yoke system
Adjustable
Stainless
Steel Cable
Guard Bar◊
“With as much time as we spend in the field hunting and filming, we’ve
got to have equipment that we can trust hunt after hunt. That’s why we
choose Hoyt! The quality, consistency and durability is unmatched and
we wouldn’t settle for anything less!”
Mark and Terry Drury, Drury Outdoors
TEC Riser Design
pro cable
guard glide
Thin Ergonomic
Grip Design
New Insulated
Grip Pad*
Standard
Configuration:
Limb
Brownell® D-75
Tri-Color Camo
Strings and Cables*
ViperTec™
24-30”
300 fps
Cam & 1/2
Stainless Steel
Stabilizer Bushing
XT 1000
Axle to axle:
32”
Cam & 1/2 available in
65% or 75% let-off.
Reflex geometry: 1 1⁄2”
Axle to axle: 32”
Brace height: 7 1⁄2”
Draw weight (H): 40-80#
Draw weight(T): 30-80#
Mass weight: 3 lb. 13 oz.
I.B.O. speeds based on 70 lb. 30” draw.
For performance based on your setup,
see your Hoyt dealer. (Bow manufactured under one or more of the following
patent numbers: 5,682,871; 5,720,267;
4,957,094, 5,505,185)
RealTree ®
HD Green™
Flag
Flame
Sims® String
Leeches*
ver Flame
Sil
Fade Red
Stealth Draw
Dampener**
Page
3
*Not available on target models. **Patent pending. ◊Target models only.
inner-cam
Draw Length
Adjustment System
e Purple
Fad
Fade Blue
Black
“My Cam & 1/2 System bow gives me exactly
what I need for every aspect of archery that I’m
involved in. Incredible speed and forgiveness for
3D shooting, smooth and extreme accuracy for
target shooting, plus it’s super quiet and easy to
tune for bowhunting. The Cam & 1/2 System also
gave me the confidence that I needed to shoot a
perfect 600 under the final day pressure of the
NFAA Atlantic City shoot. The sky is the limit...”
Tony Tazza, Winner of 2003 NFAA Atlantic City
Sealed
stainless steel
Ball Bearings
Top & Bottom
Cam & 1/2
Performance
System**
T he RazorTec™ has become a favorite to thousands of bowhunters
Sims®
Limb Savers
across the world. At 33 inches and 310 fps, the RazorTec is short and
lightweight yet packs a very powerful punch. With its incorporated
Hoyt technologies such as the TEC riser design, 3/4 Inch Split Limb
Technology, and of course the Cam & 1/2 Performance System, you’ll
also find the RazorTec to be extremely accurate and very forgiving.
Dual Locking
Pocket System
Hoyt’s
self-aligning
yoke system
“Smooth pulling, fast, quiet, accurate, forgiving and dependable. Those are
the qualities I look for in a hunting bow. Most bows have only a few of
these characteristics. Hoyt’s Cam & 1/2 bows have them all!”
Randy Ulmer, Professional Archer
TEC Riser Design
Adjustable
Stainless
Steel Cable
Guard Bar◊
RealTree ®
HD Green™
pro cable
guard glide
Limb
RazorTec™
Cam & 1/2
XT 2000
Axle to axle:
33”
Flag
24-30”
310 fps
Cam & 1/2 available in
65% or 75% let-off.
Flame
Thin Ergonomic
Grip Design
ver Flame
Sil
New Insulated
Grip Pad*
Fade Red
Standard
Configuration:
e Purple
Fad
Reflex geometry: 1 1⁄4”
Axle to axle: 33”
Brace height: 7 1⁄4”
Draw weight (Hunting): 40-80#
Draw weight (Target): 30-80#
Mass weight: 3 lb. 12 oz.
Stainless Steel
Stabilizer Bushing
Fade Blue
Brownell® D-75
Tri-Color Camo
Strings and Cables*
Black
I.B.O. speeds based on 70 lb. 30” draw. For performance
based on your setup, see your Hoyt dealer. (Bow manufactured under one or more of the following patent
numbers: 5,682,871; 5,720,267; 4,957,094, 5,505,185)
Sims® String
Leeches*
Eric Griggs, Two-time winner on the 2003 ASA Tour
*Not available on target models. **Patent pending. ◊Target models only.
“The level of pure accuracy and forgiveness that I have experienced with Hoyt’s new
Cam & 1/2 System is beyond anything that I have ever witnessed before in archery.”
inner-cam
Draw Length
Adjustment System
Stealth Draw
Dampener**
Page
4
Sealed
stainless steel
Ball Bearings
Top & Bottom
Cam & 1/2
Performance
System**
S
creamin’ fast and silky smooth is how a lot of archers and
bowhunters describe the SuperTec™. Reaching speeds of 330 fps, the
SuperTec’s radical reflex geometry and Spiral Cam & 1/2 System configuration make this the perfect bow for advanced archers looking for
unbelievable arrow speeds. The TEC riser and Cam & 1/2 technologies
featured on the SuperTec eliminates the kick that has become synonymous with fast bows. Be sure to check with a Hoyt dealer to make sure
that the SuperTec is the right bow for you.
Sims®
Limb Savers
Dual Locking
Pocket System
Hoyt’s
self-aligning
yoke system
TEC Riser Design
“Hoyt’s Cam &1/2 Performance System bows are definitely the best insurance policy to have when we go on our bowhunting roadtrips…It’s rugged,
fast, quiet and consistently true when it’s pulled from the case…the
Roadtrip’s crew trusts Hoyt’s Cam & 1/2 bows!”
Michael Waddell, Host of Realtree Roadtrips
Adjustable
Stainless
Steel Cable
Guard Bar◊
pro cable
guard glide
Thin Ergonomic
Grip Design
RealTree ®
HD Green™
New Insulated Grip Pad*
Limb
SuperTec™
Brownell® D-75
Tri-Color Camo
Strings and Cables*
Stainless Steel
Stabilizer Bushing
XT 2000
Axle to axle:
35”
23-30”
330 fps
SpiralCam & 1/2
Reflex geometry: 2”
Axle to axle: 35”
Brace height: 6”
Draw weight (Hunting): 40-80#
Draw weight (Target): 30-80#
Mass weight: 3 lb. 14 oz.
I.B.O. speeds based on 70 lb. 30” draw. For
performance based on your setup, see your Hoyt
dealer. (Bow manufactured under one or more of
the following patent numbers: 5,682,871; 5,720,267;
4,957,094, 5,505,185)
“Archery is a game of confidence and confidence is
something I definitely have knowing I’m shooting
a Hoyt Cam & 1/2 System bow. Fast, accurate,
and dependable…I wouldn’t trust anything else!”
Nathan Brooks, Winner Oakridge,
TN ASA 2003
*Not available on target models. **Patent pending. ◊Target models only.
Sims® String
Leeches*
5
Flame
Cam & 1/2 available in
55% or 65% let-off.
Standard
Configuration:
Page
Flag
ver Flame
Sil
Fade Red
e Purple
Fad
Fade Blue
Black
Sealed
stainless steel
Ball Bearings
Top & Bottom
Cam & 1/2
Performance
System**
T
he UltraTec™ name and reputation is known throughout the
archery world for the number of world and tournament records it
holds. The 2004 UltraTec is sure to live up to the reputation! It incorporates the new Triax Pocket Stabilization System machined into the riser.
This provides for an increase in strength and stability to the pocket area
and overall bow design resulting in even greater accuracy and consistency. Add the Cam & 1/2 Performance System, which dominated the
tournament circuits in 2003, and you’ve got a world class bow for world
class archers and bowhunters.
Sims®
Limb Savers
Dual Locking
Pocket System
Hoyt’s
self-aligning
yoke system
“The Cam & 1/2 Performance System is more forgiving, accurate and trouble-free
than any other cam system I have ever shot. I never have to worry about my bow,
which gives me all the confidence in the world to just go out and shoot!”
Chance Beaubouef, Winner of NFAA Vegas, Kansas City and 3rd leg IBO Triple Crown
Standard
Configuration:
Adjustable
Stainless Steel
Cable Guard Bar◊
TEC Riser Design
RealTree ®
HD Green™
pro cable
guard glide
Reflex geometry: 1 1⁄4”
Axle to axle: 37 1⁄2”
Brace height: 7”
Draw weight (Hunting): 40-80#
Draw weight (Target): 30-80#
Mass weight: 4 lb. 4 oz.
Flag
Flame
I.B.O. speeds based on 70 lb. 30” draw. For performance
based on your setup, see your Hoyt dealer. (Bow manufactured under one or more of the following patent numbers:
5,682,871; 5,720,267; 4,957,094, 5,505,185)
ver Flame
Sil
Thin Ergonomic
Grip Design
New Insulated
Grip Pad*
Fade Red
e Purple
Fad
UltraTec™
Cam & 1/2
Spiral
Cam & 1/2
Limb
Limb
XT 2000
XT 3000
25-31”
308 fps
25-31”
298 fps
25-31”
317 fps
26-33”
310 fps
Axle to axle: Axle to axle:
37 1⁄2”
40 1⁄2”
Stainless Steel
Stabilizer Bushing
Fade Blue
Brownell® D-75
Tri-Color Camo
Strings and Cables*
Black
Cam & 1/2 available in 65% or 75% let-off.
Sims® String
Leeches*
*Not available on target models. **Patent pending. ◊Target models only.
“Each year, through my writing about bowhunting and its associated gear, I get the
opportunity to handle a wide variety of bow models from nearly every major manufacturer. I’m forever seeking wild and exotic locations around the globe in the quest
for true bowhunting adventures. I’ve zero tolerance for equipment that can’t be trusted 100 percent under the harshest conditions. Departing for my musk-oxen dream
hunt, taking me deep into the northern reaches of Nunavut and close to the North
Pole, there was no doubt which bow I would pack – my Hoyt UltraTec Cam & 1/2.
It’s silky-smooth, forgiving, uncompromising disposition made it an obvious choice in
sub-zero temperatures while battling bulky clothing, stiff muscles and frost-bitten
fingers. My UltraTec Cam & 1/2 performed flawlessly, a 45-yard shot across windswept, frozen terrain assuring this woolly, Boone & Crockett-caliber bull went down
quickly. When the going gets tough, I choose Hoyt’s UltraTec Cam & 1/2.”
Patrick Meitin, Outdoor Writer
inner-cam
Draw Length
Adjustment System
Stealth Draw
Dampener**
Page
6
Cam & 1/2
Performance
System**
Sealed
stainless steel
Ball Bearings
Top & Bottom
t Hoyt USA, we recognize that different styles of shooters need difA
ferent styles of bows. The ProTec™ certainly fits that category. Its
Sims®
Limb Savers
longer axle-to-axle design and deflex riser geometry make it the perfect bow for finger shooters or those looking for an extremely accurate
and forgiving bow. It comes standard with Hoyt’s Cam & 1/2
Performance System, TEC riser design and 3/4 Inch Split Limb
Technology. For hair-splitting accuracy, count on the ProTec to deliver!
Dual Locking
Pocket System
“I hunted with the new
[Cam & 1/2 Performance
System] and found it very
easy to tune and accurate
with broadheads1…this is
one of the quietest bows
on the market and
exhibits very little recoil
or vibration2.”
Hoyt’s
self-aligning
yoke system
Bill Winke,
Outdoor Writer
April 2003 Petersen’s Hunting
2003 2Treestand Bowhunting
1
TEC Riser Design
Adjustable
Stainless Steel
Cable Guard Bar◊
ProTec™
Cam & 1/2
Spiral
Cam & 1/2
pro cable
guard glide
Accuwheel
Cam & 1/2 available
in 65% or 75% let-off.
Thin Ergonomic
Grip Design
New Insulated
Grip Pad*
Limb
Limb
Limb
XT 2000
Axle to axle:
38”
XT 3000
Axle to axle:
41 1⁄2”
LX Pro
Axle to axle:
47 1⁄2”
26-32”
296 fps
27-33”
292 fps
29-35”
274 fps
26-33”
305 fps
n/a
n/a
n/a
n/a
25-33”
255 fps
Standard
Configuration:
Brownell® D-75
Tri-Color Camo
Strings and Cables*
Deflex geometry: 1⁄2”
Axle to axle: 38”
Brace height: 8 1⁄4”
Draw weight (H): 40-80#
Draw weight(T): 30-80#
Mass weight: 4 lb. 1 oz.
I.B.O. speeds based on 70 lb. 30” draw. For
performance based on your setup, see your
Hoyt dealer. (Bow manufactured under one
or more of the following patent numbers:
5,682,871; 5,720,267; 4,957,094, 5,505,185)
Stainless Steel
Stabilizer Bushing
RealTree ®
HD Green™
Flag
Flame
ver Flame
Sil
Sims® String
Leeches*
Fade Red
Page
7
Stealth Draw
Dampener**
*Not available on target models. **Patent pending. ◊Target models only.
inner-cam
Draw Length
Adjustment System
e Purple
Fad
Fade Blue
Black
“Hoyt’s continued pursuit of cutting edge technology sets them apart from all other bow manufacturers. The bows have a torque free grip,
zero tolerance limb pockets, high performance
dependable limbs, and virtually no vibration.
The Cam & 1/2 system tunes very easily, has a
solid wall and produces extreme speeds. All in
all, Hoyt bows are the perfect recipe for confidence to compete at the highest level possible!”
Michael Braden, 2003 NFAA Shooter of the Year
Sealed
stainless steel
Ball Bearings
Top & Bottom
Cam & 1/2
Performance
System**
Sims®
Limb Savers
O
ur new Elite Series Shoot-Thru bows offered exclusively through Hoyt
USA are sure to change the way accuracy is measured. The innovative
TEC Shoot-Thru design increases the lateral stiffness and balance of the
riser while achieving the highest level of consistency and accuracy. They
also feature Hoyt’s new Triax Pocket Stabilization System for unmatched
pocket tolerances. The Elite Series models include the UltraElite, patterned after the ever-popular UltraTec and the ProElite, which incorporates the deflex geometry of the traditional ProTec. Experience a whole
new level of accuracy, shoot a new Elite Series Shoot-Thru bow today!
Dual Locking
Pocket System
Hoyt’s
self-aligning
yoke system
UltraElite Standard
Configuration:
Reflex geometry: 1 1⁄4”
Axle to axle: 38”
Brace height: 7 1⁄8”
Draw weight (H): 40-80#
Draw weight(T): 30-80#
Mass weight: 4 lb. 6 oz.
I.B.O. speeds based on 70 lb. 30” draw. For
performance based on your setup, see your
Hoyt dealer. (Bow manufactured under one
or more of the following patent numbers:
5,682,871; 5,720,267; 4,957,094, 5,505,185)
TEC Riser Design
Limb
Limb
Limb
XT 3000
XT 2000
LX Pro
UltraElite™ Axle to axle: Axle to1 axle: Axle to axle:
41 ⁄2”
38”
47”
Cam & 1/2
Spiral
Cam & 1/2
Accuwheel
25-31”
310 fps
26-32”
300 fps
28-34”
290 fps
25-31”
320 fps
26-33”
310 fps
n/a
n/a
n/a
24-31”
267 fps
pro cable
guard glide
Adjustable
Stainless Steel
Cable Guard Bar◊
Cam & 1/2 available in 65% or 75% let-off.
“After shooting a new
tournament record at the
NFAA Marked 3D
National Championships
in relentless pouring rain,
I knew that the Cam &
1/2 System was something
far greater than I could
have ever imagined. Its
forgiveness and accuracy is
unreal regardless of
nature’s elements!”
Dave Cousins, 2003 NAA
Outdoor Nat’l Champion
Thin Ergonomic
Grip Design
Flag
Flame
ver Flame
Sil
Fade Red
ProElite Standard
Configuration:
Deflex geometry: 1/2”
Axle to axle: 38”
Brace height: 8 1⁄4”
Draw weight (H): 40-80#
Draw weight(T): 30-80#
Mass weight: 4 lb. 5 oz.
I.B.O. speeds based on 70 lb. 30” draw. For
performance based on your setup, see your
Hoyt dealer. (Bow manufactured under
one or more of the following patent
numbers: 5,682,871; 5,720,267; 4,957,094)
e Purple
Fad
Limb
ProElite™
Fade Blue
Cam & 1/2
Spiral
Cam & 1/2
Black
Accuwheel
Limb
Limb
XT 3000
XT 2000
LX Pro
Axle to axle: Axle to axle: Axle to axle:
41 1⁄2”
38”
47”
26-32”
296 fps
27-33”
292 fps
29-35”
274 fps
26-33”
305 fps
28-34”
302 fps
n/a
n/a
n/a
25-33”
255 fps
Cam & 1/2 available in 65% or 75% let-off.
Hunting models include Insulated Grip Pad, Brownell D-75 Tri-Color Camo Strings and Cables, Sims String Leeches and RealTree HD Green Camo. ◊Target models only. **Patent pending.
RealTree ®
HD Green™
Stainless Steel
Stabilizer Bushing
Back and side weight
accessory holes
inner-cam
Draw Length
Adjustment System
UltraElite™
ProElite™
Stealth Draw
Dampener**
Page
8
Sealed
stainless steel
Ball Bearings
Top & Bottom
Cam & 1/2
Performance
System**
T
he SierraTec™ has been designed and engineered specifically for women
and short draw archers looking for a top of the line bow. The quality and
technology featured on the SierraTec is the same found in the rest of the
Hoyt line, however, the grip area and mass weight have been reduced to
better fit the needs of smaller archers. This year, the SierraTec is available in
the XT 2000 and XT 3000 limb models.
Sims®
Limb Savers
SierraTec™
Cam & 1/2
Cam & 1/2 available in
65% or 75% let-off.
Reflex geometry: 1 1⁄8”
Axle to axle: 33”
Brace height: 6 1⁄2”
Draw weight (H): 30-60#
Draw weight(T): 30-60#
Mass weight: 3 lb. 8 oz.
Hoyt’s
self-aligning
yoke system
Limb
XT 2000
Axle to axle:
33”
XT 3000
Axle to axle:
36”
23-28”
285 fps
25-28”
282 fps
Target colors available for SierraTec only.
Standard
Configuration:
Limb
RealTree ®
HD Green™
Flag
Flame
I.B.O. speeds based on 60 lb. 28” draw. For
performance based on your setup, see your
Hoyt dealer. (Bow manufactured under one
or more of the following patent numbers:
5,682,871; 5,720,267; 4,957,094, 5,505,185)
ver Flame
Sil
Fade Red
TEC Riser Design
e Purple
Fad
pro cable
guard glide
Fade Blue
Black
Thin Ergonomic
Grip Design
“The speed and energy that I have witnessed with Hoyt’s Cam & 1/2
Performance System is like nothing I have ever seen before in a bow. It
certainly did the job on this Boone & Crocket black bear!”
Vicki Cianciarulo, Co-Host Archer’s Choice TV Show
New Insulated
Grip Pad*
Stainless Steel
Stabilizer Bushing
are looking for a great bow at a great price, look no further.
IThef youDynaTec™
features Hoyt’s Cam & 1/2 Performance System,
Brownell® D-75
Tri-Color Camo
Strings and Cables*
patented TEC riser design, and 3/4 Inch Split Limb Technology. Its
high quality, rugged design and 32 1⁄2 inch axle-to-axle length is
perfect for the serious bowhunter on a budget.
Sims® String
Leeches*
Limb
DynaTec™
Cam & 1/2
ZR 100
Axle to axle:
32 1⁄2”
24-30”
306 fps
Cam & 1/2 available in
65% or 75% let-off.
Limb Savers™ and String Leeches™ not available on DynaTec.
Sierratec™
Page
9
DynaTec™
Stealth Draw
Dampener**
*Not available on target models. **Patent pending.
inner-cam
Draw Length
Adjustment System
Standard
Configuration:
Reflex geometry: 7⁄8”
Axle to axle: 32 1⁄2”
Brace height: 7”
Draw weight (H): 40-80#
Mass weight: 3 lb. 12 oz.
I.B.O. speeds based on 70 lb. 30” draw. For
performance based on your setup, see your
Hoyt dealer. (Bow manufactured under one
or more of the following patent numbers:
5,682,871; 5,720,267; 4,957,094, 5,505,185)
Sealed
stainless steel
Ball Bearings
Top & Bottom
Cam & 1/2
Performance
System**
I
ncredible looks and incredible performance best describe the new UltraMag™.
Our new 3D Ribbing Technology engineered into the riser allows for greater
strength and stiffness while reducing the overall mass weight of the bow. The
grip has also been reduced to minimize hand torque and create greater accuracy. Hoyt’s revolutionary Cam & 1/2 Performance System and high performance
XT 2000 5-layer laminated limb come standard on the new UltraMag.
Hoyt’s
self-aligning
yoke system
“Hoyt USA has long been regarded as a hallmark of innovation and quality.
With the addition of the Cam & 1/2 Performance System, Hoyt has taken
target archery and bowhunting to an entirely new level.”
Dave Dolbee, Associate Editor Petersen’s Bowhunting
RealTree ®
HD Green™
Standard
Configuration:
Reflex geometry: 1⁄2”
Axle to axle: 36”
Brace height: 7 1⁄8”
Draw weight (Hunting): 40-80#
Draw weight (Target): 30-80#
Mass weight: 3 lb. 12 oz.
TEC Riser Design
pro cable
guard glide
Black
Blue
I.B.O. speeds based on 70 lb. 30” draw. For
performance based on your setup, see your
Hoyt dealer. (Bow manufactured under one
or more of the following patent numbers:
5,682,871; 5,720,267; 4,957,094, 5,505,185)
Red
Limb Savers™ and String Leeches™ not available on UltraMag.
Limb
UltraMag™
Cam & 1/2
XT 2000
Thin Ergonomic
Grip Design
Axle to axle:
36”
New Insulated
Grip Pad*
24-30”
305 fps
Cam & 1/2 available in 65% or 75% let-off.
Stainless Steel
Stabilizer Bushing
T
he new UltraSport™ incorporates Hoyt’s 3D Ribbing Technology for
a stronger and lighter riser design. It features the new ZR 100 solid glass
split limb and of course Hoyt’s Cam & 1/2 Performance System. If you
want a bow with plenty of power and performance at an incredible
price, you’ll certainly hit the mark with the UltraSport!
Brownell® D-75
Tri-Color Camo
Strings and Cables*
Standard
Configuration:
I.B.O. speeds based on 70 lb. 30” draw. For
performance based on your setup, see your
Hoyt dealer. (Bow manufactured under one
or more of the following patent numbers:
5,682,871; 5,720,267; 4,957,094, 5,505,185)
Limb Savers™ and String Leeches™ not available on UltraSport.
Limb
UltraSport™
Cam & 1/2
ZR100
Axle to axle:
36”
25-31”
300 fps
Cam & 1/2 available in
65% or 75% let-off.
*Not available on target models. **Patent pending.
Reflex geometry: 1⁄2”
Axle to axle: 36”
Brace height: 7 1⁄4”
Draw weight (H): 40-80#
Draw weight(T): 30-80#
Mass weight: 3 lb. 12 oz.
inner-cam Draw
Length Adjustment
System
UltraMag™
UltraSport™
Stealth Draw
Dampener**
Page
10
“From among the 100’s of hot new
products at ATA 2003, dealers awarded
Hoyt USA’s Cam & 1/2 System bows as
their favorite.”
Archery Business Mar/Apr 2003
The Cam & 1/2 Performance System has everything you are looking for in
a cam system. It’s fast, forgiving, quiet, smooth and the most accurate cam
system we have ever engineered. The top and bottom cams are symmetrical, which allows for precise tuning and ultimate accuracy. They are also
“slaved” together with one harness system, which means they will fire at
the exact same time, every time! The Cam & 1/2 Performance System is
extremely easy to tune and virtually maintenance free. Sealed stainless steel
ball bearings come standard on both the top and bottom cams ensuring the
smoothest and most consistent bearing design on the market. It features an
extremely easy to use inner-cam adjustment system allowing for 3 inches of
adjustment in half-inch increments without the use of a bow press, and a 65
or 75% let-off option. Shoot the revolutionary Cam & 1/2 Performance
System and discover a whole new level of accuracy and performance.
Draw Force (lb.)
In its first year, the Cam & 1/2 Performance System™ (patent pending) has taken the archery world by storm. Archers and
bowhunters from all around the world continue to say the same thing… “I’ve never shot better than with the Cam & 1/2
Performance System.” Cam & 1/2 System bows have set an unbelievable number of tournament and world records and is the
first cam system in history to win every single NFAA tournament in the men’s open pro division. Combining the technologies
of single and two cams into one cam system has truly created the most efficient and effective cam system available. Shoot the
Cam & 1/2 Performance System today and see for yourself what all of the excitement is about!
Draw Length (in.)
This chart is for cam performance comparison only. The example shown
is a 70 lb. bow drawn to 30”. Your individual cam performance will vary.
Spiral Cam & 1/2 - The Spiral Cam & 1/2 has a faster
Cam & 1/2
If you’re an advanced or expert archer looking for pure speed with incredible
consistency and accuracy then the Spiral Cam & 1/2 System is your ticket. It
features an aggressive force draw curve and is available in half inch increments
with a built in let-off system allowing for adjustments between 55 and 65%
ATA. The Spiral Cam & 1/2 System features all of the same technologies and
engineering principles of the Cam & 1/2 System (shown above) but has been
designed to be unbelievably fast, and unbelievably fast it is!
Spiral Cam & 1/2
initial build up of weight and the extended time at peak
weight can make this cam a little tougher to draw. In
return this allows for more stored energy, which ultimately produces more speed.
Cam & 1/2 - The Cam & 1/2 is a perfect balance of speed
and a very smooth draw. It features a smoother initial
pull, a shorter time at peak weight and a slightly slower
descent into the back end of the draw curve.
AccuWheel - The AccuWheel features a smooth initial
We haven’t forgotten about those archers who love to shoot round
wheels. Our AccuWheel is the ultimate wheel for that easy, long valley
that a lot of finger shooters love. A 65% ATA let-off and inner-cam draw
length adjustability (patented) are standard features.
pull and a gradual descent into the back end of the wheel
with a larger valley for finger style shooters who prefer a
more “spongy” feel at full draw. Speeds are substantially
decreased with the AccuWheel.
AccuWheel
1
XT 2000
XT 1000
2
The new 13” XT 1000 incorporates Hoyt’s patented 3/4 Inch Split Limb and
USD Technologies and is constructed of 5 layers of lamination.
The 14” XT 2000 is packed with all of Hoyt’s patented limb technologies and
has solidified itself as a top limb design in the industry.
XT 3000
LX PRo
ZR 100
Hoyt has taken pocket tolerance and alignment to a whole new level
with the new Triax Pocket Stabilization System. This new stabilization system is machined into the aluminum riser increasing the
breadth of contact between the dowel and the riser. This new Hoyt
technology ensures superior alignment of the dowel and riser and
provides exceptional pocket strength and stability.
3
Compound limbs manufactured under one or more
of the following patent numbers 4,350,138; 5,720,267.
4
1. Initially, the limb begins as a pre-stressed, contoured limb.
2. The limb becomes straighter as more load is applied.
3. The more stress (bend), the more energy is stored throughout the entire length of the limb.
4. At full draw, the limb harnesses more power and produces
more speed.
The secret behind Hoyt’s laminated split limb performance is
that it is really a contoured or pre-stressed limb engineered
with Uniform Stress Distribution (USD) Technology. This
means that as the limb bends, energy is distributed evenly
throughout the entire length of the limb eliminating all “hot
spots,” which are found on most solid limbs and provides for
an incredible increase in speed and durability.
The XT 3000 is 15 1⁄2 inches in length making it a perfect choice for archers
looking for a longer bow or increased brace height.
The new ZR 100 is manufactured from solid glass and incorporates Hoyt’s 3/4
Inch Split Limb Technology. It provides great performance at a great price.
Hoyt’s patented 3/4 Inch Split Limb Technology provides for an
effective overall width of 2 1⁄4 inches, creating more lateral and torsional stability than that of a traditional 1 1⁄2 inch solid limb. The 3/4
Inch Split Limb design also eliminates the vulnerable v-groove where
failure can occur on traditional solid limbs. The 3/4 Inch Split Limb
design is lighter, more efficient, and provides for increased arrow
speeds, durability and accuracy.
3/4” Split Limb
Traditional
Solid Limb
At 18 inches, the five layer laminated LX Pro has a recurve design and is
perfect for those looking for an exceptionally long axle-to-axle bow.
Our Dual Locking Pocket System has proven to be the tightest tolerance pocket system in the industry. It offers a dual weight locking
mechanism, aerospace tolerances, and superior limb, riser and pocket
alignment. The pocket section of a bow is extremely important to the
accuracy and consistency of a bow and nothing comes close to Hoyt’s
pocket technologies!
Page
11
New Vertical
Adjustment Mount
for increased sight window
New Vertical
Adjustment Mount
for increased sight window
Mini MicroElite
MicroElite
The new sleek Mini MicroElite is loaded with
top-of-the-line sight features. It has a complete
machined aluminum construction and features
a level and a ball detent micro-adjustment system. It has 5 large, durable fiber optic pins and
is available in autumn brown and silver.
(1 1⁄2” housing; 3⁄4” pin gap)
The new and improved MicroElite features a
machined aluminum construction for greater
durability and a ball detent micro-adjustment
system that requires no tools. It comes standard
with 5 large, durable fiber optic pins and is
available in autumn brown and sliver.
(2” housing; 1 1⁄4” pin gap)
Kit A MicroElite, Mini Flex Stabilizer, DuraLite Quiver, QT3000
New Vertical
Adjustment Mount
for increased sight window
New Vertical
Adjustment Mount
for increased sight window
All quivers in kit options come standard in 6 arrow configurations.
Vectrix
The new Vectrix is an extremely compact and lightweight sight with a full aluminum construction. It
features thumb adjustment knobs requiring no
tools and comes standard with a level and 3 durable
fiber optic pins. The Vectrix is sure to change the
way we look at compact sights. Available in autumn
brown. (1 1⁄2” housing; 3⁄4” pin gap)
AccuLite
The new AccuLite is comprised of an aluminum
makeup with a Lexan pin guard to protect the 3
large Glo-Dot sight pins. Adjustments are made
simple with the easy to use thumb knobs, which
require no tools. Available in autumn brown.
New Vertical
Adjustment Mount
for increased sight window
ProElite
Seeker
The new ProElite sight is the ultimate sight to use
for both hunting and target shooting. It has a complete aluminum construction and features a ball
detent micro-adjustment system. It comes standard with a removable 3-power lens, sight level,
and 5 Glo-Dot sight pins. Available in autumn
brown and silver. (1 1⁄2” housing; 3⁄4” pin gap)
The Seeker is a light, compact sight ideal for all
youth bows. A single, durable fiber optic pin is
mounted to a steel frame and protected by a
metal pin guard. Available in black.
Kit b
Kit g
Kit l
DuraLite Quiver
Mini Flex Stabilizer
Mini MicroElite
QT3000
Quick Detach Quiver
Mini Flex Stabilizer
MicroElite
QT4000
Quick Detach Quiver
Mini Flex Stabilizer
Vectrix
QT3000
Kit c
Kit h
Kit m
Quick Detach Quiver
Mini Flex Stabilizer
MicroElite
QT3000
Quick Detach Quiver
Mini Flex Stabilizer
Mini MicroElite
QT4000
DuraLite Quiver
Mini Flex Stabilizer
AccuLite
QT4000
Kit d
Kit i
Kit n
Quick Detach Quiver
Mini Flex Stabilizer
Mini MicroElite
QT3000
DuraLite Quiver
Mini Flex Stabilizer
AccuLite
QT3000
DuraLite Quiver
Mini Flex Stabilizer
Vectrix
QT4000
Kit e
Kit j
Kit o
DuraLite Quiver
Mini Flex Stabilizer
MicroElite
QT4000
DuraLite Quiver
Mini Flex Stabilizer
Vectrix
QT3000
Quick Detach Quiver
Mini Flex Stabilizer
AccuLite
QT4000
Kit f
Kit k
Kit P
DuraLite Quiver
Mini Flex Stabilizer
Mini MicroElite
QT4000
Quick Detach Quiver
Mini Flex Stabilizer
AccuLite
QT3000
Quick Detach Quiver
Mini Flex Stabilizer
Vectrix
QT4000
Super Rest
Patent pending
DuraLite Two-Piece Quivers
This lightweight yet extremely durable two-piece quiver mounts
directly to the riser and comes standard with an adjustable height
setting feature (high & low) to accommodate different arrow
lengths. It features a pre-cut foam insert for fixed and mechanical
broadheads and an arrow gripper that will hold both aluminum and
carbon arrows. Fits all 2004 Hoyt TEC bows. Available in 4 or 6
arrow. Realtree HD Green camo pattern.
*N.A.P. 4000 TEC Rest
The N.A.P. Quicktune 4000 FallAway Rest offers micro-adjustability
while maintaining smooth and quiet
operation. It is designed with a solid
locking feature preventing any and
all movement and comes standard
with a two-position adjustability feature. Available in silver and black.
Patent pending
*N.A.P. 3000 TEC Rest
The N.A.P. Quicktune 3000 TEC rest
offers both precision and micro
adjustability. The mounting plate is
designed with a solid locking feature
preventing even the slightest movement. The rest plate also comes standard with a two-position adjustability
feature. Available in silver and black.
Patent pending
N.A.P. 1000 TEC Rest
The N.A.P. 1000 TEC Rest fits all of
Hoyt’s 2004 model bows. Adjustments
are simple and precise with the use of
an allen wrench. Available in black.
The Flex Stabilizer features a Doinker dampening device to dampen any excess vibration and
noise. Available in Realtree HD Green and
silver. (5 3⁄4”; 12 oz.)
Patent pending
Patent pending
3000 TEC Overdraw
Quick Detach Quiver
4000 TEC Overdraw
The Quick Detach Quiver is a super light, one piece quiver that
features a lever-lock mounting system allowing for easy removal
in the field without the use of tools. Available in a 4 or 6 arrow
configuration and comes complete in Realtree HD Green camo.
The 4000 TEC Overdraw features our N.A.P. 4000
rest and is designed to fit all 2004 Hoyt aluminum
TEC bows (excluding SuperTec and SierraTec).
Available in silver and Realtree® HD Green™.
Mini Flex Stabilizer
The Hoyt Jackpine Quiver features a quick
release lever for easy on and off. It is durable
yet lightweight and is perfect for those
bowhunters on a budget.
Page
12
Quiet Track Rest
*Designed specifically for all 2004 Hoyt aluminum TEC bows.
Flex Stabilizer
Jackpine Quiver
Hunter Rest
The Mini Flex features a Doinker dampening
device which fits snug against the riser to dampen
any excess vibration and noise. Its compact size
makes it a perfect choice for serious bowhunters.
Available in Realtree HD Green. (4 1⁄4”; 7 oz.)
The new 3000 TEC Overdraw features our
N.A.P. 3000 rest and is designed to fit all 2004
Hoyt aluminum TEC bows (excluding SuperTec
and SierraTec). Available in silver and Realtree®
HD Green™.
F
eaturing Hoyt’s patented TEC riser design for a smooth, shock free
shooting experience, the AeroTec™ has incredible balance and stability providing for an exceptional level of consistency and accuracy. An adjustable
limb pocket design allows for the traditional Hoyt détente limb system,
while dramatically reducing limb shift through a Hardlock détente pocket.
AeroTec Configurations:
Available lengths: 23” & 25”
Mass weight 23”: 2 lb. 10 oz.
Mass weight 25”: 2 lb. 14 oz.
Riser style: Original Earl Hoyt Geometry,
Dovetail Limb Mount w/Proven Hardlock
Alignment System, Interchangeable Grip
FLAG
Risers manufactured under patent number: 5,682,871.
ER FLAM
ILV
E
S
FLAME
E RED
FAD
DE PURPL E
FA
DE BLUE
FA
Earl Hoyt Jr.
Earl Hoyt Jr. was a true pioneer of recurve
design and technology. Many of his original
designs are still utilized in our products today
and have been trusted by more recurve archers
around the world than any other name.
BLACK
I
n just its first year, the Hoyt Matrix™ has become a tournament favorite
around the world. It features Earl Hoyt’s original deflex riser design and is very
lightweight yet extremely stable. And Hoyt’s patented Dovetail Limb Mount
with our proven Hardlock Alignment System provides unmatched reliability
and consistency. Check out the Matrix today, a true recurve masterpiece.
Matrix Configurations:
Available lengths: 23” & 25”
Mass weight 23”: 2 lb. 10 oz.
Mass weight 25”: 2 lb. 12 oz.
Riser style: Original Earl Hoyt
Geometry, Dovetail Limb Mount
w/Proven Hardlock Alignment
System, Interchangeable Grip
T
he GM™ is the perfect bow for beginning recurve archers or intermediate
archers on a budget. It features Earl Hoyt’s original deflex riser design and is
lightweight, extremely durable, and very easy to shoot. The Gold Medalist comes
standard with a weight adjustability feature and a Verta-Tune plunger module.
BLACK
RED
BLUE
Gold Medalist (GM) Configurations:
Available lengths: 25”
Mass weight 25”: 2 lb. 14 oz.
Riser style: Original Earl Hoyt Geometry, Dovetail Limb Mount
w/Proven Hardlock Alignment System, Interchangeable Grip
PAGE
13
AeroTec™
Matrix™
Gold Medalist™
Mary Zorn, Christie Bisco,
Aya LaBrie, Amber Dawson (USA)
Dave Cousins (USA)
Chris White (GBR)
Mary Zorn (USA)
Jason McKittrick (USA)
Tom Henriksen (DEN)
Natalia Valeeva (ITA)
Jean-Marc Beaud (FRA)
Adam Wheatcroft (USA)
Simon Fairweather (AUS)
Braden Gellenthien (USA) Wietse Van Alten (NED)
Magnus Petersson (SWE)
David Barnes (AUS)
Morten Bøe (NOR)
Ulrika Sjowall (SWE)
Alison Williamson (GBR)
Joe McGlyn (USA)
Clint Freeman (AUS)
Dejan Sitar (SLO)
Jari Haavisto (FIN)
Butch Johnson (USA)
Don Rabska (USA)
Mario Ruele (ITA)
Maggy Masson (FRA)
Cornelia Pfohl (GER)
Irma Luyting (NED)
Irma Luyting, Mary Zorn,
Amber Dawson
Margarita Galinovskaya (RUS)
Ashley Kamuf (USA)
Tim Cuddihy (AUS)
Sandrine Vandionant (FRA)
Special thanks to Yoshi Komatsu for shooter photographs.
“I’ve been shooting recurve archery
competitively for over twenty years.
My participation in the sport helps
me tremendously when it comes to
researching, designing, and building
cutting edge recurve products that
benefit top archers around the world.”
Bias Carbon
Glass
George Tekmitchov,
Hoyt USA Recurve Product Engineer
Hoyt’s all-new G3 limb is the pinnacle of recurve limb technology.
Engineered to produce the ultimate combination of speed, stability
and smoothness, the G3 limb utilizes advanced materials that are
fused to an updated version of the proven nonlinear Syntactic
Foam core. The result is a third-generation, high modulus, heat
resistant design, which stores more energy than a conventional
limb, yet yields an easy pull through the clicker, and upon release
delivers an unmatched combination of speed and stability.
Non-Tapered
Foam Core
Uni-Directional
Carbon
Parabolic Foam Core
Glass
Bias Carbon
Glass
Bias Carbon
Glass
The FX combines greater initial energy storage on the draw allowing
for extreme speeds on the release. The smooth, nonlinear taper of the
FX’s monolithic Syntactic Foam core combined with multiple layers
of carbon and glass minimize mass and maximize performance in all
weather conditions. Please see the reference chart on the back cover
for length and weight options.
Hard Rock Maple
Glass
Hard Rock Maple
Glass
The Kinetic’s high performance design is smooth, stable, and virtually vibration free. It is composed of a hard rock maple core
surrounded with glass and carbon fiber laminates providing for
unparalleled, smooth performance.
Parabolic Tapered
Foam
Uni-Directional
Carbon
Glass
Glass
Bias Carbon
Glass
The Edge features multi-laminated hard rock maple cores and highstrength fiberglass skins. The edge design provides for incredible
performance and consistency shot after shot.
The Vector limb is engineered with Hoyt’s Syntactic Foam and carbon
technologies making it extremely stable and all weather reliable. The
Vector design also promotes a smoother pull through the clicker and is
very quiet and easy to shoot. It is available in three lengths
PAGE
14 and in two-pound increments from 24 to 50#.
Linear Tapered
Foam
Uni-Directional
Carbon
Linear Tapered Foam
Glass
Hard Rock Maple
Hard Rock Maple
Glass
C
A
D
B
A. Team Hoyt Long Sleeve Tee (Black)
B. Hoyt Long Sleeve Tee (Gold)
C. Mock Turtleneck (Black)
D. Team Hoyt Long Sleeve Tee (Red)
B
A
A
B
C
A. Fleece Pullover (Red/Black)
B. Windbreaker (Khaki)
C. Fleece Vest (Navy)
A. Team Hoyt Hooded Sweatshirt (Black)
B. Team Hoyt Long Sleeve Jersey
B
C
A
D
A. Est. 1931 Tee (Blue)
B. Team Hoyt Oval Tee (Red)
(also available in youth sizes)
C. Bowhunting Tee (Beige)
D. Most Wanted Tee (Stone)
(back shown)
Infant One-Piece (Yellow)
B
A
A
B
C
D
A. Long Sleeve Twill (Brown)
B. Men’s Polo (Red)
A. Hoyt Backpack
B. Shooter Towel (Black)
C. Women’s Polo (Lt. Blue)
D. Men’s Polo (Black)
A
A
B
B
D
C
A. Black Hoyt USA Cap
B. Black Hoyt USA Visor
E
E
C
A. Hoyt Window Decal 30” x 3”
B. Hoyt Window Decal 6” x 1”
C. Team Hoyt Window Decal
D
D. Team Hoyt Trailer Hitch Plug
E. Hoyt Vehicle Emblem
A
A
C. Yellow Team Cap
F
D. Red/Black Team Cap
G
B
E. Navy Team Cap
H
A. High Wrist Compound AccuGrip*
B. Custom Rosewood Recurve Grip
C. Custom Riser Shelf Silencers
(Available for all 2004 TEC bows)
B
G. Camo Suede Team Cap
H. Khaki/Black Cap
*Patent #5,551,413; (Available for all 2004
TEC bows excluding DynaTec)
F. Camo Flame Team Cap
C
C
A. Hoyt USA Mug (Red)
Page
B. Hoyt USA Photo Frame
C. Hoyt USA Holiday Ornament 15