288-327 Fittings_279-318 fittings

MINIMATIC® BARB FITTINGS
Minimatic
barb
fittings
provide a flexible, easy alternative to ferrule and pushto-connect
design fittings.
Features
• Miniature size provides low profile
• Multiple configurations for every need
• Brass or Brass Electroless nickel plating
• Available with 1/16”, 3/32” or 1/8” hose barb
• Available with #10-32 thread and 1/8” NPT
• Holds to the burst pressure of polyurethane hose
Clippard Minimatic barb fittings are designed to be used with
Clippard urethane hose. The flexibility and strength of urethane
hose and the compact design of the fittings are ideal for
pneumatic applications where convenience and size are considerations. The Minimatic barb fitting used with Clippard urethane hose will provide a leak free connection that will hold
well beyond the working pressure of the hose without the need
for additional clamps.
Minimatic barb fittings are available in a wide variety of configurations in a number of styles including tee, connectors, crosses,
swivel, and universal. Barb sizes can be mixed on the same fitting for applications requiring multiple tubing sizes. The electroless nickel plating of Minimatic barb fittings provides corrosion resistance in applications involving high moisture, while
enabling the fittings to retain their original, lustrous appearance.
Buna-N gasket included with #10-32 threads except when
ordered in bulk.
Miniature
Pneumatic Fittings
Poster
Clippard's fullcolor fittings poster
displays hundreds
of available fittings
including PushQuick, Barb, Brass,
Quick-Connect and
more. Also included
is an extensive
variety of miniature
hose and tubing from
copper and nylon to flexible polyurethane,
vinyl and Buna-N. Sizes include 1/8"c 1/4",
5/32", 6 mm, 8 mm, 3/8" and 1/2"OD in
various styles. Call to request a copy.
Single-Barb Fittings
• Allow for easier assembly onto tubing
• Provide less leakage potential and increased pressure performance
• Reduce the need to constantly tighten the assembly
• Provide a single sharp edge allowing the barb to catch onto the
tubing for a leak-free connection
• Require less clamp pressure
• Allow tubing to “relax” to its original size which is essential to the
assembly and pressure of the connection.
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
tubing
g relaxes
behind barb
precise machinin
machining
results in sharp edge
on barb for secure
“catch” on tubing
299
MINIMATIC® BARB CONNECTORS
All fittings are brass unless otherwise noted, i.e. ENP (Electroless Nickel-Plated)
#3-56 to Barb Connectors
Barb (ID)
1/16”
#3-56 Male to 1/16” Barb
(10/pack)
Order No.
11750-2
“A”
0.187”
“D” Dia.
0.046”
“D” dia.thru
“A”
1/8"
hex.
#3-56
thd.
0.062
#10-32 to Barb Connectors
#10-32 Male to Single Barb
(10/pack)
“D” dia.thru
“A”
1/4”
hex.
Barb (ID) Order No.
1/16”
11752-5*
3/32”
11752-8*
1/8”
11752-4*
1/16”
CT2**
3/32”
CT3**
1/8”
CT4**
“A”
0.312”
0.367”
0.406”
0.328”
0.367”
0.406”
“D” Dia.
0.052”
0.073”
0.109”
0.052”
0.073”
0.109”
Material
Brass
Brass
Brass
ENP Brass
ENP Brass
ENP Brass
* Buna-N gasket furnished in pack quantity only
** Gasket pre-installed
0.156
#10-32 thd.
#10-32 Male to Multi Barb
“D” dia.
-thru
(10/pack)
“A”
0.437”
0.500”
0.656”
“D” Dia.
0.052”
0.109”
0.090”
1/4"
hex.
#10-32
thd.
#10-32 Male with Captivated O-Rings to
Barb, 1/4” Hex.
“D” dia.thru
(10/pack)
Barb (ID)
1/16”
3/32”
1/8”
Order No.
11792-5
11792-8
11792-4
“A”
0.313”
0.352”
0.391”
“D” Dia.
0.052”
0.073”
0.109”
“A”
0.481”
0.512”
“D” Dia.
0.055”
0.109”
“A”
0.203”
0.242”
0.325”
“D” Dia.
0.052”
0.073”
0.104”
Buna-N o-ring furnished installed
“A”
1/4"
hex.
captivated
o-ring seal
#10-32 thd.
0.015
0.156
#10-32 Male with Captivated O-Rings to
Barb, 5/16” Hex.
(10/pack)
“D” dia.thru
“A”
Barb (ID)
1/16”
1/8”
Order No.
11782-5-ENP
11782-4-ENP
Buna-N o-ring furnished installed
5/16"
hex.
captivated
o-ring seal
#10-32 thd.
0.156
#10-32 Male Flush Fitting to Barb
(10/pack)
“D” dia.thru
“A”
0.156
300
Order No.
11752-2
11752-3
11752-1
Buna-N gasket furnished in pack quantity only
“A”
0.156
Barb (ID)
1/16”
1/8”
1/8”
3/16”
dia.
Barb (ID)
1/16”
3/32”
1/8”
Order No.
12841
12843
12842
Gasket not required; thread sealant required. Tighten by hand for flush
mounting in #10-32 threaded holes.
#10-32
thd.
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
MINIMATIC® BARB CONNECTORS
All fittings are brass unless otherwise noted, i.e. ENP (Electroless Nickel-Plated)
ENP #10-32 Male to Barb Swivel
(5/pack)
“D” dia.thru
“A”
Barb (ID)
3/32”
1/8”
Order No.
ST3
ST4
“A”
0.821”
0.891”
#D” Dia.
0.052”
0.109”
“A”
0.762”
“D” Dia.
0.109”
*Gasket included, not installed
5/16" hex.
0.156
#10-32 thd.
#10-32 Male to 1/8” I.D. Barb Swivel
(5/pack)
Barb (ID)
1/8”
Order No.
15045
Not to be used as a constant rotation junction
“D” dia.thru
TIP Most Clippard #10-32 threaded fittings require
no more than 9 inch-pounds of torque to seal.
We recommend that this force not be exceeded.
“A”
0.140
#10-32 thd.
Barb (ID)
1/16”
3/32”
1/8”
#10-32 Female to Barb
(5/pack)
“D” dia.thru
1/4" sq.
“A”
Order No.
CF2
CF3
CF4
“A”
0.640”
0.640”
0.718”
“D” Dia.
0.052”
0.073”
0.109”
#10-32 thd.
ENP #10-32 Female to Barb Swivel
(5/pack)
Barb (ID)
3/32”
1/8”
Order No.
S3F
S4F
Barb (ID)
1/16”
1/16”
1/16”
3/32”
3/32”
1/8”
Barb (ID)
1/16”
3/32”
1/8”
3/32”
1/8”
1/8”
Barb (ID) 1
3/32”
1/8”
Barb (ID) 2
3/32”
1/8”
“A”
0.821”
0.871”
“D” Dia.
0.052”
0.109”
Order No.
C22
C32
C42
C33
C43
C44
“R”
0.656”
0.684”
0.734”
0.712”
0.762”
0.812”
“D” dia.thru
“A”
5/16" hex.
#10-32 thd.
Barb to Barb Connectors
ENP Barb to Barb
(5/pack)
1/4" sq.
“R”
ENP Barb to Barb Swivel
(5/pack)
Order No.
S33
S44
“A”
1.052”
1.183”
1
“A”
5/16” hex.
2
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
301
MINIMATIC® BARB
TO
NPT CONNECTORS
All fittings are brass unless otherwise noted, i.e. ENP (Electroless Nickel-Plated)
1/16” Barb to Male NPT
(5/pack)
0.052
dia.-thru
”H”
”A”
NPT
3/32” Barb to Male NPT
0.073
dia.-thru
(5/pack)
”H”
”A”
1/8” Barb to Male NPT
NPT
0.014
dia.-thru
(5/pack)
”H”
”A”
NPT
1/8” Barb to Male NPT
(5/pack)
0.094
dia.-thru
NPT
1/16”
1/8”
1/4”
3/8”
13/16”
Order No.
1CJ2
2CP2
4CQ2
6CW2
8CZ2
“A”
0.490”
0.740”
0.770”
0.890”
1.020”
NPT
1/16”
1/8”
1/4”
3/8”
13/16”
Order No.
1CJ3
2CP3
4CQ3
6CW3
8CZ3
“A”
0.710”
0.773”
0.804”
0.929”
1.054”
NPT
1/16”
1/8”
1/4”
3/8”
13/16”
Order No.
1CJ4
2CP4
4CQ4
6CW4
8CZ4
“A”
0.719”
0.860”
0.890”
1.020”
1.140”
Barb (ID)
1/8”
Order No.
11924-1
“A”
1.000”
Barb (ID)
1/8”
Order No.
15055
“A”
1.155”
“H” Hex.
5/16”
7/16”
9/16”
11/16”
13/16”
“H” Hex.
5/16”
7/16”
9/16”
11/16”
13/16”
“H” Hex.
5/16”
7/16”
9/16”
11/16”
13/16”
“A”
7/16”
hex.
Barb to 1/8” NPT Swivel
(5/pack)
0.109
dia.-thru
“A”
Buna-N o-ring furnished installed
Not to be used as a constant rotation junction
7/16”
hex.
1/8-27 NPT
ENP 1/8” NPT Swivel
0.109
dia.-thru
(5/pack)
Barb (ID)
1/8”
Order No.
S4N
“A”
1.103”
“A”
1/2"
hex.
1/8-27
NPT
1/4” Barb to Male NPT Flush Fittings
(5/pack)
“D” dia.thru
Barb (ID)
1/8”
1/4”
Order No.
12844*
12845*
“A”
0.625”
0.625”
NPT
1/8”
1/4”
* Requires thread sealant. Threads specifically designed to go flush
into 1/8” or 1/4” NPT female port
“A”
5/32” internal hex
for tightening
302
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
MINIMATIC® ELBOW BARB FITTINGS
All fittings are ENP (Electroless Nickel-Plated)
Barb (ID)
1/16”
3/32”
1/8”
#10-32 Male to Barb
“R”
(5/pack)
“A”
1/4" sq.
#10-32 thd.
0.156
Barb (ID)
1/16”
3/32”
1/8”
“R”
“A”
“A”
0.312”
0.312”
0.312”
“R”
0.468”
0.493”
0.562”
“A”
0.344”
0.344”
0.344”
“R”
0.504”
0.556”
0.576”
Gasket included, not installed
#10-32 Male to Barb Universal
(5/pack)
Order No.
CT0-2
CT0-3
CT0-4
Order No.
UT0-2
UT0-3
UT0-4
Buna-N o-ring included
5/16” hex.
#10-32 thd.
0.156
#10-32 Female to Barb
(5/pack)
“R”
Barb (ID)
1/16”
3/32”
1/8”
Order No.
CF0-2
CF0-3
CF0-4
“A”
0.468”
0.468”
0.468”
“R”
0.453”
0.493”
0.525”
Order No.
UT0-F
“A”
0.344”
“R”
0.500”
Barb (ID)
1/16”
3/32”
1/8”
Order No.
ST0-2
ST0-3
ST0-4
“A”
0.578”
0.578”
0.578”
“R”
0.531”
0.580”
0.611”
“A”
#10-32 thd.
Universal #10-32
(5/pack)
“R”
#10-32F thd.
“A”
1/4" sq.
#10-32 thd.
0.156
#10-32 Male to Barb Swivel
(5/pack)
“R”
Gasket included, not installed
5/16" hex.
“A”
5/16” hex.
0.156
#10-32 thd.
1/8” NPT Male Swivel
“R”
(5/pack)
“A”
Barb (ID)
1/16”
1/16”
1/8”
Order No.
SP0-2
SP0-3
SP0-4
“A”
0.843
0.843
0.843
“R”
0.612”
0.653”
0.684”
Barb (ID)
1/8”
Order No.
S40-4
“A”
0.875”
“R”
0.656
7/16" hex.
1/8-27 NPT
1/8” Barb to Barb Swivel
(5/pack)
“R”
“A”
5/16" hex.
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
303
288-327 Fittings_279-318 fittings 3/13/12 2:41 PM Page 313
#10-32 BRANCH TEES
All fittings are ENP (Electroless Nickel-Plated)
Barb (ID)
1/16”
3/32”
1/8”
1/8”
#10-32 Male to Barb
(5/pack)
1/4" sq.
.
“A”
0.156
#10-32 thd.
Barb (ID)
1/16”
3/32”
1/16”
1/8”
Order No.
TT0-202
TT0-303
TT0-402
TT0-404
“A”
0.312”
0.312”
0.312”
0.312”
“R”
0.670”
0.738”
0.748”
0.826”
“A”
0.344”
0.344”
0.344”
0.344”
0.344”
0.344”
“R”
0.718”
0.759”
0.800”
0.790”
0.832”
0.863”
Buna-N gasket included, not installed
“R”
#10-32 Male Universal
(5/pack)
“R”
“A”
5/16" hex.
#10-32 thd.
0.156
Universal #10-32
(5/pack)
Barb (ID)
1/16”
1/16”
1/16”
1/8”
1/8”
1/8”
Barb (ID)
1/16”
3/32”
3/32”
1/16”
3/32”
1/8”
Buna-N o-ring included
Order No.
UT0-F0F
“R”
Order No.
UT0-2002
UT0-3002
UT0-3003
UT0-4002
UT0-4003
UT0-4004
“A”
0.351”
“R”
0.500”
(3)
#10-32
thd.
“A”
0.156
1/4" sq.
#10-32 thd.
#10-32 Male Swivel
Barb (ID)
1/16”
3/32”
1/8”
“R”
(5/pack)
Barb (ID)
1/16”
3/32”
1/8”
Order No.
ST0-2002
ST0-3003
ST0-4004
“A”
0.578”
0.578”
0.578”
“R”
0.718”
0.801“
0.863“
Gasket included, not installed
“A”
5/16" hex.
0.156
#10-32 thd.
Barb (ID)
1/16”
3/32”
1/8”
1/8” NPT Male Swivel
(5/pack)
“R”
“A”
Barb (ID)
1/16”
3/32”
1/8”
Order No.
SP0-2002
SP0-3003
SP0-4004
“A”
0.843”
0.843”
0.843”
“R”
0.718”
0.801”
0.863”
7/16" hex.
1/8-27 NPT
Barb to Barb
(5/pack)
2
“A”
1
1/4" sq.
3
“R”
Barb (ID)
1/8”
Barb to Barb Swivel
(5/pack)
“R”
“A”
304
Barb 1 (ID)
1/16”
1/16”
1/16”
1/16”
1/16”
3/32”
3/32”
3/32”
1/8”
1/8”
1/8”
Barb 2 (ID) Barb 3 (ID) Order No.
1/16”
1/16”
T22-2
1/16”
1/8”
T42-2
3/32”
1/16”
T22-3
1/8”
1/16”
T22-4
1/8”
1/8”
T42-4
1/16”
3/32”
T33-2
3/32”
3/32”
T33-3
1/8”
3/32”
T33-4
1/16”
1/8”
T44-2
3/32”
1/8”
T44-3
1/8”
1/8”
T44-4
Order No.
S40-4004
“A”
0.871”
“A”
0.671”
0.734”
0.656”
0.656”
0.734”
0.712”
0.712”
0.712”
0.812”
0.812”
0.812”
“R”
0.460”
0.460”
0.494”
0.538”
0.538”
0.460”
0.494”
0.538”
0.460”
0.494”
0.538”
“R”
0.611”
5/16" hex.
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
#10-32 RUN TEES
All fittings are ENP (Electroless Nickel-Plated)
#10-32 Male to Barb
(5/pack)
1
1/4" sq.
“A”
2
0.156
Barb 1 (ID) Barb 2 (ID)
1/16”
1/16”
1/16”
1/8”
3/32”
3/32”
1/8”
1/16”
1/8”
1/8”
Order No.
TT2-2
TT2-4
TT3-3
TT4-2
TT4-4
“A”
0.515”
0.500”
0.543”
0.593”
0.593”
“R”
0.460”
0.525”
0.493”
0.460”
0.538”
“A”
0.793”
0.821”
0.902”
“R”
0.531“
0.580“
0.611“
Buna-N gasket included, not installed
#10-32 thd.
“R”
Barb 1 (ID) Barb 2 (ID)
1/16”
1/16”
3/32”
3/32”
1/8”
1/8”
#10-32 Male to Barb Swivel
(5/pack)
“R”
1
Order No.
ST2-2
ST3-3
ST4-4
Gasket included, not installed
2
“A”
5/16" hex.
0.156
#10-32 thd.
Barb (ID)
1/16”
3/32”
1/8”
Universal #10-32 to Barb
(5/pack)
“R”
Order No.
UTF-2
UTF-3
UTF-4
“A”
0.562”
0.562”
0.562”
“R”
0.504”
0.556”
0.576”
Buna-N o-ring included
“A”
5/16" hex.
#10-32 thd.
0.156
Universal #10-32
#10-32 thd.
(5/pack)
Order No.
UTF-F
“A”
0.562”
“R”
0.500”
Barbs (ID)
1/16”
3/32”
1/8”
Order No.
SP2-2
SP3-3
SP4-4
“A”
1.031”
0.656”
1.156”
“R”
“A”
1/4" sq.
0.156
#10-32 thd.
1/8” NPT Male to Barb
(5/pack)
“R”
“R”
0.625”
1.062”
0.718”
1
2
“A”
7/16" hex.
1/8-27 NPT
Barb 1 (ID) Barb 2 (ID)
1/16”
1/16”
1/8”
1/8”
Barb to Barb Swivel
“R”
(5/pack)
Order No.
S42-2
S44-4
“A”
1.074”
1.183”
“R”
0.531”
0.611”
1
2
“A”
5/16” hex
“H” hex.
1/8-27 NPT
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
305
MINIMATIC® CROSS & COMPRESSION FITTINGS
All fittings are ENP (Electroless Nickel-Plated) unless otherwise noted
#10-32 Male to Barb
(5/pack)
1/4" sq.
2
“A”
.
1
3
#10-32 thd.
0.156
Barb 1 (ID)
1/16”
1/16”
3/32”
1/8”
1/8”
1/8”
1/8”
Barb 2 (ID) Barb 3 (ID)
1/16”
1/16”
1/8”
1/16”
3/32”
3/32”
1/16”
1/16”
1/16”
1/8”
1/8”
1/16”
1/8”
1/8”
Order No.
XT2-202
XT4-202
XT3-303
XT2-402
XT2-404
XT4-402
XT4-404
“A”
0.515”
0.593”
0.543”
0.515”
0.515”
0.593”
0.593”
“R”
0.670”
0.670”
0.736”
0.748”
0.826”
0.748”
0.826”
Buna-N gasket included, not installed
“R”
Barb
1/16”
3/32”
1/8”
1/8”
Universal #10-32 to Barb
(5/pack)
“R”
#10-32F thd.
0.718
Barb
1/16”
3/32”
1/16”
1/8”
Order No.
UTF-2002
UTF-3003
UTF-4002
UTF-4004
“A”
0.562”
0.562”
0.562”
0.562”
“R”
0.718”
0.800”
0.790”
0.863”
Buna-N o-ring included
5/16” hex.
#10-32 thd.
0.156
Universal #10-32
Order No.
UTF-F0F
“R”
(5/pack)
“A”
0.562”
“R”
0.625”
(3)
#10-32
thd.
“A”
0.156
1/4" sq.
#10-32 thd.
Barb 1
1/16”
1/16”
1/16”
1/16”
1/16”
3/32”
3/32”
3/32”
3/32”
1/8”
1/8”
Barb to Barb
(5/pack)
2
1/4" sq.
“A”
1
3
4
“R”
Barb 2
1/16”
1/16”
1/16”
1/8”
1/8”
1/16”
3/32”
1/8”
3/32”
1/16”
1/8”
Barb 3
1/16”
1/16”
1/16”
1/16”
1/8”
3/32”
3/32”
3/32”
3/32”
1/16”
1/8”
Barb 4 Order No.
1/16”
X22-202
3/32”
X32-202
1/8”
X42-202
1/8”
X44-202
1/8”
X44-402
1/16”
X33-202
3/32”
X33-303
1/8”
X44-303
1/8”
X43-303
1/8”
X42-402
1/8”
X44-404
“A”
0.656”
0.684”
0.734”
0.812”
0.812”
0.712”
0.712”
0.812”
0.762”
0.734”
0.812”
“R”
0.670”
0.670”
0.670”
0.670”
0.748”
0.748”
0.736”
0.736”
0.736”
0.748”
0.826”
Compression Fittings
Brass #10-32 to Tube Compression Fittings
with Captivated O-Rings
#10-32 thd.
3/8” hex.
Tube (OD)
1/8”
1/16”
Options: (-ENP)
Order No.
11923
15160
“A”
0.694”
0.694”
“D” Dia.
0.090”
0.046”
Replacement Ferrule and nut #15155 (11923 only)
“D” diathru
dia. thru
captivated
o-ring seal
0.156
“A”
BrassNPT to 1/8” O.D. Tube Compression
Fittings
“B”
NPT
1/8”
1/16”
Order No.
3810-1
3810-2
“B”
1.035”
0.914”
Hex
7/16”
3/8”
0.625
Options: (-ENP)
Replacement Ferrule and nut #15155
0.093
dia. thru
hex.
306
NPT
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com