Control Valves

Transcription

Control Valves

CONTROL VALVES
PRESSURE ACTUATED SWITCHES . . . . . . . . . . .148
ELECTRIC & PNEUMATIC SWITCHES . . . . . . . . .149
PRESSURE REGULATORS . . . . . . . . . . . . . . .150
EXPANDED! CHECK VALVES . . . . . . . .151 - 152
EXPANDED! NEEDLE VALVES . . . . . . .153 - 156
MUFFLERS . . . . . . . . . . . . . . . . . . . . . . . .154
EXPANDED! FLOW CONTROLS . . . . . .157 - 161
SHUTTLE VALVES . . . . . . . . . . . . . . .162 - 163
EXHAUST VALVES . . . . . . . . . . . . . .164 - 165
PULSE VALVE LEAK DETECTOR . . . . . . . . . .166
SPECIALTY COMPONENTS . . . . . . . . . . .167 - 168
PNEUMATIC COUNTERS . . . . . . . . . . . . . . . . .169
SENSORS . . . . . . . . . . . . . . . . . . . . . . .170 - 171
SPECIAL FUNCTION VALVES . . . . . . . . . .172 - 174
147
Clippard Instrument Laboratory, Inc. 877-245-6247 www.clippard.com
PRESSURE ACTUATED SWITCHES
❑❑❑-1❑❑-❑❑-❑
SAS Sub-Miniature Air Switch
MAS Miniature Air Switch
Nominal Actuation
Pressure*
06
20
40
65
MN
Design Series
Switch Current Rating:
SAS
A 5A @ 125/250 VAC
3A @ 30 VDC/.1A 60 VDC
X no switch
Switch Terminals:
SAS: 0 no switch
1 110 series Q.C.
MAS: 0 no switch
2 187 series Q.C.
3 screw terminals
Pressure Actuated
SAS Model
STD. & -M5
panel 3/16 max
w/ 5/8 dia. hole
see side view for
different models
0.400
3/4" hex
shoulder
2-56 switch
mounting screw
0.780
1.310
5/8-32
mounting
thread
0.340
3/4" hex
shoulder
1.490
MAS Model
-F & -P
1.500
11/16" hex
shoulder
0.260
1/8-27 NPT inlet port
5/8-32 mounting thd
0.186 dia.
#10-32 x 0.8
inlet port
0.040
stroke
15/32-32
mounting thd.
0.375
see side view for
different models
0.260
-F Model
Shown
0.260
0.260
panel 3/16 max
w/ 5/8 dia. hole
0.040
stroke
0.186 dia.
15/32-32
mounting thd
0.313
0.375
S.P.D.T.
sub-miniature
switch
N.C. N.O. COM
-MN
1/8-27 NPT inlet port
0.220
#10-32 x 0.8
inlet port
*Actuation pressure is nominal
only. For applications where
accuracy is critical, please
contact Clippard.
Mechanically Actuated
-F & -P
5/8-32
mounting
thread
Inlet Port:
Blank #10-32 thd
F 1/8” NPT female
P 1/8” NPT male
MAS
B 3A @ 125/250 VAC
3A @ 30 VDC
C 10A @ 125/250 VAC
5A @ 50 VDC
Medium: Air
Inlet Pressure: 5 to 150 psig
Pilot Port: #10-32, 1/8” NPT
RoHS
Mounting: External thread and nut for panel, bracket,
or bulkhead mounting,
5/8 - 32 pressure actuated
#15/32-32 manually operated
Accuracy: Actuation pressures listed are nominal values
only. For applications where a tight tolerance for
actuation or deactuation is needed, please contact
Clippard.
6 psig
20 psig
41 psig
65 psig
Manual
3/4" hex
shoulder
1.520
0.313
5/8-32
mounting
thd.
0.340
1.910
3/4" hex
shoulder
0.260
11/16" hex
shoulder
1.710
N.C.
0.630
N.O.
COM
1.100
S.P.D.T.
miniature
switch
0.410
0.410
-P Model
Shown
0.410
4-40 switch mounting screw
148
ELECTRIC & PNEUMATIC SWITCHES
Single Pole Electrical Switch
Pneumatic Electric Switches
pressure port
0.062 I.D.
hose barb
0.750
0.500
vacuum port
0.062 I.D.
hose barb
0.250
0.750
COMMON
0.328
0.796
NORMALLY
1
0.125 stroke
1.937
0.140
0.110 x 0.020
spade lugs
0.100 dia.
mounting holes
OPEN
NORMALLY
CLOSED
0.250
Electrical Rating: 60 ma. AC resistive 40 ma. DC resistive @
120 volts
0.468
0.562
0.906
1.562
Rating A.C.: 120 volts - 15 amperes
240 volts - 15 amperes
480 volts - 15 amperes
A
0.687
0.781
15/32-32 thd.
Stem Travel: 1/8” (3.2)
B
0.500
mounting holes
for #6 screw
0.656
0.406
Switching Speed: 125 Hz, Normally-Open
NO
Actuating Pressure: 3” H2O 10% pressure vacuum,
or DP
NC
Maximum Pressure: 8 psig (continuous)
Rating D.C.: 125 volts - 0.5 amperes
250 volts - 0.25 amperes
Mounting: #15/32-32 thread; nut and lockwashers furnished, also two
0.140” dia. mounting holes in body
Approvals: UL and CE
Part No.
ES-1
15601
Description
Single Pole, Double Throw Snap-Action Electrical Switch
Terminal Cover
CUSTOM er
solutions
Needle valves are
common in controlling
the flow of fluids and
gases. This special
needle valve uses a
“D” stem for adapting
to standard panel
knobs. It also incorporates a special left-handed thread to
provide a more intuitive clockwise
movement to increase flow of the
back for ease-of-assembly in a tight
space. It also incorporates a special
toggle to match the customers’
aesthetic requirements.
Construction: ABS plastic case gold plated contacts
natural rubber diaphragm
Use: For interfacing fluidic or
other low pressure air signals with
Electronic circuitry dual inputs
operates on pressure, vacuum, or
differential pressure signals
Part No.
5100-3-NO
5100-3-NC
View additional
information and
useful videos
Description
Pneumatic Electric Switch, Normally-Open Contacts
Pneumatic Electric Switch, Normally-Closed Contacts
If you need a product that fits your application perfectly, Clippard has
the capability to design or modify one of its products to suit your exact
needs. We understand that a standard catalog product may be close but
not be exactly what you need. Let us know YOUR Need, and we will
help to find YOUR Solution!
A combination
assembly using a toggle
or push button operator and
Clippard’s pressure-actuated
electrical switches provides a
simultaneous air and electrical
output.
Alternate materials, seals and/or
lubrication a for specific
applications are common (and
welcomed) requests at Clippard.
Stainless steel, aluminum, plastic
or brass. All available, just ask!
This air-piloted valve is designed
for a water application where
limited space is available.
For more information, visit www.clippard.com/customsolutions
149
MINIATURE PRESSURE REGULATORS
Miniature Pressure Regulators
Regulators are offered in either relieving or non-relieving versions. The relieving design maintains a constant pressure output
even when downstream conditions change.
Medium: Air
The non-relieving regulator does not automatically compensate
for changes in downstream flow or pressure. There is no vent to
atmosphere, as in a relieving type regulator, and the output pressure can increase due to a downstream event.
Input Pressure: 300 psig
Materials: Brass body, Nitrile seals, stainless steel stem and spring
Air Flow: 3 scfm @ 50 psig; 5 scfm @ 100 psig
RoHS
Mounting: #15/32-32 thread. Nuts and lockwashers furnished
Adjustment: By means of a knob with micro-adjustment (40
pitch thd.)
Adjustable Pressure Regulators
Plunger-Type Pressure Regulators
exhaust
#10-32 inlet
3
1
#10-32 outlet
15/32-32 thd.
2
0.312
0.590
exhaust 3
#10-32 inlet 1
0.300
#10-32 outlet 2
15/32-32 thd.
0.375
0.375
0.687
1.000
dia.
2.046
0.218
0.437
Plunger Travel: 7/32”
0.375
0.375
0.687
Force For Full Stem Travel: 25 lb. nominal
0.500
max.
2.046
2.046
7/8 max.
#10-32
MAR-1-2
MAR-1-3
MAR-1-4
MAR-1-5
MAR-1-6
MAR-1-7
MAR-1
Knob
MAR-1K-2
MAR-1K-3
MAR-1K-4
MAR-1K-5
MAR-1K-6
MAR-1K-7
MAR-1K
1/8” NPT
MAR-1P-2
MAR-1P-3
MAR-1P-4
MAR-1P-5
MAR-1P-6
MAR-1P-7
MAR-1P
Range (psig)*
0-20
0-30
0-40
0-50
0-60
0-70
0-100
Non-Relieving
MAR-1NR-3
MAR-1NR-4
MAR-1NR-5
MAR-1NR-6
MAR-1NR-7
MAR-1NR
Cartridge and manifold mount styles also available. Consult factory.
Industrial
•
•
•
•
1/8” NPT
MAR-1CP-2
MAR-1CP-3
MAR-1CP-4
MAR-1CP-5
MAR-1CP-6
MAR-1CP-7
MAR-1CP
Medical
Special Configurations & Assemblies
Robust
Reliable
Manifold Mount
Pre-Assembled & Tested
#10-32
MAR-1C-2
MAR-1C-3
MAR-1C-4
MAR-1C-5
MAR-1C-6
MAR-1C-7
MAR-1C
* Outlet pressure is based on 7/32” stem travel. If stem is depressed
further, the outlet pressure will increase.
MAR Series Regulators
•
•
•
•
2
Operation: As plunger is depressed pressure increases
proportionally to the travel; when plunger is released the
input is closed and the output pressure is exhausted to atmosphere
All NEW mounting configurations
now available. See updated product
specifications here.
Range
(psig)
0-20
0-30
0-40
0-50
0-60
0-70
0-100
3
1
Dental
Compact
Multiple Medias
Cartridge Style
Preset to Pressure
Metric line available. Visit www.clippard.com
150
EXPANDED CHECK VALVES
Four varieties of check valves are offered by Clippard. Each permits flow
in one direction only. All have brightdipped brass bodies that provide inline mounting, Nitrile seals and
stainless steel springs as standard. The
MCV-2 has #10-32 ports and a “duckbill” seal. The MCV-1 series has #10-32 ports and a brass poppet.
The MJCV-1 series has 1/8” NPT ports and a Zytel 80G33 poppet.
The GCV has 1/4” and 3/8” NPT ports.
Materials: Brass body, Nitrile
seals, stainless steel spring
Medium: Air or Hydraulic
Input Pressure: 300 psig max.
(MJCV Series: 1,000 psig
hydraulic max.)
5/16"
hex.
0.750
#10-32 outlet 1
Medium: Air
#10-32 inlet 2
Air Flow: 1 scfm @ 50 psig
Pressure To Crack: 1 psig
Pressure To Fully Open: 2.5
Part No.
MCV-2
2
1
Mounting: Direct or in-line
Flow Direction: Arrow on valve RoHS
body indicates direction of flow
#10-32 inlet 1 #10-32 outlet 2
Temperature Range: 32° to 230°F
Note: Not intended for pressure relief
Pressure To Open: Cracks at approx.
1/2 psig
0.156
Part No.
MCV-1AB
3/8"
hex.
1.000
1
3/8"
hex.
2
Air Flow: 6.5 scfm @ 50 psig; 11.5 scfm @ 100 psig
0.750
0.156
#10-32 inlet 1 #10-32 outlet 2
Part No.
MCV-1
#10-32 inlet 1
#10-32 outlet 2
1
2
0.812
Part No.
MCV-1BB
1
#10-32 outlet 2
#10-32 inlet 1
2
1.250
Part No.
MCV-1AA
3/8"
hex.
9/16"
hex.
0.156
0.156
0.937
1
2
3/8"
hex.
1/8" NPT inlet 1
9/16"
hex.
Part No.
MJCV-1AB
1.375
1/8" NPT outlet 2
2
1
1.562
1/8" NPT inlet 1
Part No.
MJCV-1
1/8" NPT outlet 2
1
2
1.437
Part No.
MJCV-1AA
1/8" NPT inlet 1
9/16"
hex.
Part No.
MJCV-1BA
2
1/4" NPT both ends
1
2
1
1
0.313 typ.
Part No.
GCV-4
1/8" NPT outlet 2
1/8" NPT inlet 1
1/8" NPT outlet 2
1.875
2
11/16"
hex.
0.813
dia.
2.222
0.313 typ.
3/8" NPT both ends
Part No.
GCV-5
1
13/16"
hex.
0.938
dia.
2
Pressure To Crack: 1.5 psig
Pressure To Crack: 1.5 psig
151
9/16"
hex.
PILOT-OPERATED CHECK VALVES
Medium:
Pressure Range:
Temperature Range:
Materials:
Air, Water or Oil
Up to 300 psig (see chart below)
32 to 230°F
ENP brass, anodized aluminum,
stainless steel, Nitrile seals
For specialty
options such as
various seal
materials, manual
override, or
specific pilot to
supply ratios,
please consult
factory.
Pilot-Operated Check Valves work as standard check valves,
but can be opened with an air pilot signal to permit free flow
in the normally “checked” direction. The Clippard PilotOperated Check Valve provides the user with a reliable
method to check flow in one direction, with the ability to
remotely signal a free flow through the valve. Ideal for any
circuit that requires this useful function—all in one valve
that is easy to connect!
• High flow valve means low pressure drop
• Uses Clippard’s superior poppet design
• Variety of port configurations available
• “Auxiliary” port allows ease of plumbing
• Side port (port 2) rotates for ease of positioning
RoHS
Function/Porting Options
Pilot-Operated
Check Valve
High Flow
2-Way Valve
Port 3 (pilot)
Port 3 (pilot)
Port 1
(cylinder
port)
Port 2 Port 1
(input) (supply)
Port 2
(output)
Flow-to-Supply Pressure
25
Flow (scfm) (Port 1 to Port 2)
20
JPC-3
JPC-2
15
10
5
0
0
10
20
30
40 50 60 70
Supply Pressure (psig)
80
90
100
port 3
#10-32 thd.
port 3
#10-32 thd.
1.147 auxiliary port
2 #10-32 thd.
plugged
port 2
1/8” NPT
port 1
1/8” NPT
35
30
25
20
15
0
10
20
30
40 50 60 70
Supply Pressure (psig)*
80
90
100
port 1
1/8” NPT
1.711
Part No.
JPC-3FPN*
1.711 auxiliary port
2 #10-32 thd.
plugged
port 2
#10-32
Minimum Pilot Pressure (psig)
Minimum Pilot-to-Supply Pressure
40
0.897
Part No.
JPC-2NPN
0.500
flats
port 3
1/8” NPT
port 3
1/8” NPT
port 3
#10-32 thd.
0.250
2.022
auxiliary port 2
#10-32 thd.
1.376
plugged
port 2
#10-32 thd.
port 2
1/8” NPT
0.897
0.156
Part No.
JPC-3FPF*
2.024
port 2
1/8” NPT
auxiliary
port 2
#10-32 thd.
plugged
port 1
1/4” NPT
port 1
1/8” NPT
port 1
#10-32 thd.
Part No.
JPC-2NLN
auxiliary
port 2
#10-32 thd.
plugged
1.147
Part No.
JPC-3FQF*
1.147
* Also available in corrosion-resistant materials. Add “CR-” to the beginning of the Part No.
152
NEEDLE VALVES
Flow - scfm @ 100 psig
6
#10-32 thd.
#5-40 thd.
#5-40 thd.
#5-80 thd.
5
MNV-3
MNV-4
4
MNV-1
3
2
MNV-2
1
15˚
5˚
20˚
3˚
3˚
1
2
5
4
3
6
8
7
Number of Needle Turns
0.070 dia.
0.070 dia.
0.047 dia.
MNV-1
MNV-2
0.067 dia.
MNV-3
MNV-4
Adjustable control needle valves restrict flow in both directions. There are four models offered by Clippard, all with #1032 ports, but with various needle configurations to provide
coarse or fine flow adjustment. The diagram of needle shapes
and the chart on this page show the difference between these
models.
Medium: Air, Water or Oil
RoHS
Adjustment: Knurled knob (clockwise adjustment provides
less flow), or Screwdriver slot (clockwise adjustment provides
less flow.
Materials: Brass body; stainless steel needle; Nitrile seal
Mounting: Direct, in-line or #15/32-32 thread nut and lockwashers
furnished as illustrated
15° Needle Valves, 1/8” NPT
15° Needle Valves, #10-32
#10-32 outlet 2
#10-32 inlet 1
2
1
#5-40 thd.
flow adjustment
1/8" NPT inlet 1
#10-32 outlet 2
7/16"
hex.
#5-40 thd.
flow adjustment
0.281 dia.
0.281 dia.
0.156
7/16"
hex.
0.125 max.
0.343 max.
0.968
0.125 max.
0.343 max.
1.187
Part No.
MNV-1
MNV-1K
Input Pressure: 2,000 psig max.
Part No.
MNV-1P
MNV-1KP
Description
Needle Valve, #10-32, Screwdriver Slot
Needle Valve, #10-32, Knurled Knob
Description
Needle Valve, 1/8” NPT, Screwdriver Slot
Needle Valve, 1/8” NPT, Knurled Knob
#10-32 inlet 1
1/2"
sq.
#10-32 outlet 2
#10-32 inlet 1
15/32-32 thd.
#5-40 thd.
flow adjustment
0.500
0.375
0.500
0.562
max.
7/16"
hex.
0.125
stem
travel
0.328
max.
Air Flow: 2.5 scfm @ 50 psig; 5 scfm @
100 psig
Air Flow: 1 scfm @ 50 psig; 2.5 scfm @ 100 psig
Description
0.156
0.968
153
#5-40 thd.
flow adjustment
0.125
1.062
Part No.
MNV-2
MNV-2K
#10-32
outlet 2
Part No.
MNV-3
MNV-3K
Description
EXPANDED NEEDLE VALVES & MUFFLERS
3° Needle Valves, 1/8” NPT
0.250 dia.
7/16"
hex.
1/8" NPT
inlet 1
#10-32
outlet 2
0.406
full open
flow
adjustment
0.406
0.406
full open full open
0.593
0.281
0.328
max.
1.187
0.156
#10-32 inlet 1
0.390
"B"
"B"
#10-32 outlet 2
Air Flow: 2.5 scfm @ 50 psig; 5 scfm @
100 psig
Part No.
MNV-3P
MNV-3KP
Part No.
MNV-4
MNV-41
MNV-42
MNV-4K
MNV-4K1
MNV-4K2
RoHS
Speed Control Mufflers
lock nut
0.580
max.
Side Port
”B” Note: Knurled locking nut standard
#10-32 . . . . .0.593
1/16 Barb . . .0.750 Screwdriver Slot
1/8 Barb . . . .0.906
#10-32 . . . . .0.593
Knurled Knob
1/16 Barb . . .0.750
1/8 Barb . . . .0.906
NEW! 3° Cartridge Needle Valves
0.580
max.
0.264
14 mm
hex
0.710
12 mm
hex
0.703
lock
nut
0.292
0.318
0.303
hex.
1/4-18 NPT
1/8-27 NPT
SCM-P
0.375
Description
lock nut
0.375
SCM-Q
screwdrive
slot
0.576
0.505
full
open
0.625
#10-32
lock nut
lock nut
0.650
max.
0.870
max.
0.093 dia.
1.017
0.904
17 mm
hex
21 mm
hex
0.329
0.500
0.358
3/8-18 NPT
SCM-W
0.187
0.003
0.161 dia.+- 0.001
-0.750 deep
0.200 dia. ± 0.003-0.477 deep
0.276 dia. ± 0.002-0.375 deep
0.297 dia. ± 0.002-0.230 deep
#10-32 UNF-2B thd.-0.625 deep
1/2-14 NPT
SCM-Z
Knurled knob length based on minimum thread engagement.
Material: Solid brass body; sintered bronze muffler (40 micron)
Part No.
SCM-P
SCM-Q
SCM-W
SCM-Z
32 rms
Description
Muffler, 1/8-27 NPT
Muffler, 1/4-18 NPT
Muffler, 3/8-18 NPT
Muffler, 1/2-14 NPT
Part No.
MNV-4C
MNV-4CK
Description
4-Way Needle Cartridge Valve, Screwdriver Slot
4-Way Needle Cartridge Valve, Knurled Knob
154
NEW! NEEDLE VALVES
60
Needle Valves are used to control the rate of flow in a pneumatic system by controling flow in both directions. Material
enters the input port, travels through an adjustable orifice and
out the output port. Available with multiple port sizes, flow
rates, mounting options and adjustment styles.
GNV-3
50
GNV-5
scfm @ 100 psig
40
GNV-4
RoHS
Air Flow: GNV-3: 11 scfm @ 100 psig
GNV-4: 45 scfm @ 100 psig
GNV-5: 60 scfm @ 100 psig
30
20
Materials: Electroless nickel plated brass body and needle, anodized
aluminum housing
10
Mounting: Direct, in-line or cartridge style
Ports: Rotating input allows 360° positioning
0
Adjustment: Recessed slotted needle or knurled knob
0
Seals: Nitrile standard. FKM optional.
1
2
3
4
5
8
7
9
10
1
2
•
•
•
•
•
Direct Mount Needle Valves, 1/8” NPT
Provide bidirectional flow control
Rugged and compact design
Multiple mounting options
360° rotating ports
Ideal for use with Push-Quick fittings
0.890
0.657
1/8” NPT
pipe thread
0.563
sq.
1/8” NPT
with seal
(GNV-3R shown)
1/4” NPT
pipe thread
0.750
sq.
1.613
1.034
Part No.
GNV-3R
GNV-3K
6
Number of Turns
1/4” NPT
supplied with
pre-applied
sealant
(GNV-4K shown)
Part No.
GNV-4R
GNV-4K
Description
Description
In-Line Mount Needle Valves, 1/8” NPT
1.125
1/8” NPT
(both sides)
0.156 dia.
mtg. holes
1.125
3/8” NPT
pipe thread
0.750
0.875
sq.
1.871
0.125
(GNV-5K shown)
Part No.
GNV-5R
GNV-5K
155
Description
3/8” NPT
supplied with
pre-applied
sealant
1.000
1.250
0.625
(GNV-3RI shown)
Part No.
GNV-3RI
GNV-3KI
Description
NEW! NEEDLE VALVES
1/4” NPT
(both sides)
0.203 dia.
mtg. holes
3/8” NPT
(both sides)
0.203 dia.
mtg. holes
0.813
1.522
1.500
1.00
1.760
1.250
1.000
0.218
1.750
0.220
(GNV-4RI shown)
Part No.
GNV-4RI
GNV-4KI
1.500
0.250
2.000
0.250
0.750
(GNV-5RI shown)
Part No.
GNV-5RI
GNV-5KI
Description
1.000
Description
Cartridge Needle Valves
0.735
dia.
0.610
dia.
0.616 dia ±0.002
0.600 dia ±0.002
0.492 dia ±0.001
±0.001
0.192
0.476 dia.
0.250
1.398
1.005
0.630
0.447
1.126
0.172
0.498
0.581
0.819
0.416
0.943
0.412
0.116
dia. typ.
1/4-28 thd.
(GNV-3KC shown)
(GNV-4RC shown)
1/4-28 thd.
0.218
dia. typ.
7/16-20 thd.
7/16-20 thd.
Part No.
GNV-3RC
GNV-3KC
Part No.
GNV-4RC
GNV-4KC
Description
Cartridge Needle Valve, Screwdriver Slot
Cartridge Needle Valve, Knurled Knob
Clippard Push-Quick
Fittings provide a simple method
0.860
dia
0.770 dia.±0.002
0.743 dia.±0.002
(GNV-5RC shown)
0.581
0.447
1.292
1.552
0.486
0.931
Description
1.062
to connect pneumatic components
to each other and system piping.
and accept both flexible hose and
rigid tubing. Both fittings and tubing
are available in many styles, sizes
and colors.
0.250
dia. typ.
9/16-18 thd.
9/16-18 thd.
Part No.
GNV-5RC
GNV-5KC
Description
156
FLOW CONTROL VALVES
60
Flow Controls
Flow vs. Needle Turns
MFC-2/MFC-2
MFC-3/BFC-3
50
JFC-2
JFC-3
scfm @ 100 psig
40
JFC-4
JFC-5
30
20
Clippard offers five models of adjustable flow controls with #10-32 through 3/8” NPT ports. They
feature a combination needle and check valve
that controls flow in one direction and allows
free flow in the opposite direction.
10
0
0
1
2
3
5
4
They are an ideal valve for use with a cylinder,
providing a slow extend stroke while allowing a
fast retract stroke. The chart on this page illustrates
the flow versus the number of needle adjustments
turns for the MFC-2, MFC-3, BFC-3, JFC-2, JFC-3,
JFC-4 and JFC-5.
6
7
8
10
9
number of turns
Adjustable Flow Control Valve
Materials: Brass body and stainless steel needle; Nitrile seals
0.734
Air Flow: 4 scfm max. @ 50 psig; 7 scfm max. @ 100 psig
Pressure To Open: Cracks at approx. 2 psig
0.421
0.281
Mounting: In-line
0.562
0.718
RoHS
Flow Direction: Arrow in valve body shows direction of
controlled flow
0.156
1.000
#10-32 inlet 1
#10-32 outlet 2
0.312
2
Adjustment: Knurled knob on needle shaft
Part No.
MFC-2
Description
Adjustable Flow Control Valve, #10-32
157
1
FLOW CONTROL VALVES
#10-32 Valves, Knurled Knob
0.250 dia.
Mounting: Directly into #10-32 port
Ports: Rotating input port allows 360˚
positioning #10-32 port
meter out (A)
meter in (B)
Flow Direction: Arrow on valve body shows direction of controlled flow
Adjustment: Screwdriver slot; slotted knurled knob with lock nut on
#5-80 (MFC) or #10-80 (JFC) threaded needle shaft for fine
adjustment; or recessed slotted needle
RoHS
Part No.
MFC-3AK
MFC-3AK1
MFC-3AK2
MFC-3BK
MFC-3BK1
MFC-3BK2
#10-32 Valves, Screwdriver Slot
0.906
0.406
full open
Description
Meter Out Control Valve, #10-32 Female Side Port
Meter Out Control Valve, 1/16” Barb Side Port
Meter In Control Valve, #10-32 Female Side Port
Meter In Control Valve, 1/16” Barb Side Port
#10-32 Valves, Recessed Needle
5 scfm @ 100 psig
adjustable
Part No.
MFC-3A
MFC-3A1
MFC-3A2
MFC-3B
MFC-3B1
MFC-3B2
Description
0.593
0.281
0.390
5 scfm @ 100 psig adjustable
1/8” NPT Control Valves, Knurled Knob
1.000
0.400 dia.
0.532
15/32-32 thd.
0.308
2.122
0.156
#10-32 thd.
Part No.
MFC-3AR
MFC-3AR1
MFC-3AR2
MFC-3BR
MFC-3BR1
MFC-3BR2
9/16 sq.
0.593
Description
1/8” NPT Valves, Knurled Knob
0.907
1/8" NPT typ.
9/16"
hex.
0.375
11 scfm @ 100
psig adjustable
Part No.
JFC-2A
JFC-2B
#10-32
5/8 hex.
JFC-2A outlet 2
JFC-2B inlet 1
JFC-2A inlet 1
JFC-2B outlet 2
adjustment
needle
lock nut
1
2
#10-80 thd.
needle adjustment
0.359/0.485
1/8" NPT
Description
Meter Out Control Valve, 1/8” NPT
Meter In Control Valve, 1/8” NPT
0.288
0.536
dia.
1/8” NPT Valves, Recessed Needle
1.479
9/16"
sq.
seal
1/8" NPT
9/16" hex.
0.270 dia.
0.938
1/4" push quick
fitting
0.288
11 scfm @ 100
psig adjustable
0.536 9/16
sq.
dia.
Universal 1/8" pipe thd.
2
1
1.119
11 scfm @ 100
psig adjustable
Part No.
JFC-3AR
JFC-3BR
JFC-3ARP08
JFC-3BRP08
seal
0.938
1/4" push quick
fitting
universal 1/8" pipe thd.
Description
2
Meter Out Control Valve, 1/4” Push-Quick Fitting
Meter In Control Valve, 1/4” Push-Quick Fitting
1
Part No.
JFC-3A
JFC-3B
JFC-3AP08
JFC-3BP08
Description
Meter In Control Valve, 1/4” Push-Quick Fitting
158
FLOW CONTROL VALVES
These
combination
needle
and check valve
flow controls are
typically used to
control air flow
from air cylinders,
thereby
controlling the
speed at which
the piston strokes, either while extending or retracting, depending
on their location in the circuit.
J-Series Flow Control Valves allow free flow in one direction. In the
opposite direction the flow is metered by the needle valve.
Models listed in the chart have either a 1/4” NPT (JFC-4) or 3/8”
NPT (JFC-5) male threaded outlets, recessed screwdriver slot (R) or
knurled knob (K) flow adjustment needles and female NPT or pushto-connect tubing (Push-Quick) inlets. The P08 models features a
1/4” Push-Quick fitting, and the P12 versions have a 3/8” PushQuick fitting.
Material: Electroless nickel plated brass needle and stem, anodized
aluminum body, Nitrile seals
Air Flow: JFC-4: 45 scfm @ 100 psig adjustable
JFC-5: 60 scfm @ 100 psig adjustable
RoHS
Mounting: Directly into cylinder. Panel or in-line.
Part #
JFC-4K & JFC-4R
JFC-4K-P08 & JFC-4R-P08
JFC-5K & JFC-5R
“D”
0.710”
0.562”
0.710”
0.827”
0.750”
“W”
0.875”
1.062”
1.250”
1.125”
1.375”
1/4” NPT Valves, Adjusting Knob
"W"
"W"
11/16"
hex.
11/16"
hex.
0-0.066
"D"
"D"
1/4” NPT
pipe thread
or pushquick fitting
inlet
0.750
sq.
1.660
1/4” NPT
pipe thread
inlet
0.750"
sq.
1.660
1/4” NPT
supplied with
pre-applied
sealant
outlet
1/4” NPT
supplied with
pre-applied
sealant outlet
(JFC-4R shown)
Part No.
JFC-4R
JFC-4R-P08
JFC-4R-P12
0.340-0.62 5
(JFC-4K shown)
Part No.
JFC-4K
JFC-4K-P08
JFC-4K-P12
Description
Description
3/8” NPT Valves, Adjusting Knob
"W"
7/8"
hex.
7/8"
hex.
"W"
0-0.072
0.340-0.625
"D"
"D"
0.875
sq.
1.920
(JFC-5K-P12 shown)
Part No.
JFC-5K
JFC-5K-P12
159
3/8” NPT
supplied with
pre-applied
sealant
outlet
Description
3/8” NPT
pipe thread
inlet
0.875
sq.
3/8” NPT
pipe thread
inlet
1.920
3/8” NPT
supplied with
pre-applied
sealant outlet
(JFC-5R-P12 shown)
Part No.
JFC-5R
JFC-5R-P12
Description
NEW! PQ FLOW CONTROLS
PQ-FV In-Line Flow Controls can be easily added to existing circuitry and are lightweight and compact in size. Since it is a tubeto-tube connection, in-line flow controls may be installed as a
meter-in or meter-out device.
The PQ-C Elbow Controls are ideal for low cost and lightweight
applications when mounting directly to an NPT port on a cylinder
or valve is required.
In the meter-out versions, intake air flows freely through the flow
control; exhaust air is metered out through an adjustment screw.
With the meter-in series, air is metered in through an adjustment
screw; exhaust air flows freely. Control is varied through
a finely threaded adjustment screw. A locking nut is
provided so it can be secured in its final setting.
Medium: Air
Pressure Range: 0 to 150 psig
Vacuum: 0 to 29.5” Hg
Ports: #10-32, 1/8” NPT, 1/4” NPT, 3/8” NPT, 1/2” NPT
Adjustment: Knurled knob
Material: Nickel plated brass, plastic resin, stainless steel
gripper ring, Nitrile seals
PQ-CV & PQ-CI
PQ-FV
• Small, compact size
• Design flexibility and fast response
• Complete rotation of the valve body around the bolt allows
for optimum positioning of tubing
• Special adjustment needle design allows large adjustment
ranges with high precision
• Ideal for use with polyurethane, nylon, polyethylene and
polypropylene tubing (see www.clippard.com)
Right Angle Meter-Out Controls
Part No.
Tubing Size
PQ-CV04N
1/8”
PQ-CV04P
1/8”
PQ-CV05N
5/32”
PQ-CV05P
5/32”
PQ-CV08N
1/4”
PQ-CV08P
1/4”
PQ-CV08Q
1/4”
PQ-CV12Q
3/8”
PQ-CV12W
3/8”
PQ-CV16Q
1/2”
Thread “T”
#10-32
1/8” NPT
#10-32
1/8” NPT
#10-32
1/8” NPT
1/4” NPT
1/4” NPT
3/8” NPT
3/8” NPT
“H” Hex. “A” Max.
5/16”
1.230
7/16”
1.630
5/16”
1.210
7/16”
1.570
5/16”
1.240
7/16”
1.615
9/16”
1.900
9/16”
1.950
3/4”
2.395
3/4”
2.270
“W”
0.990
1.165
0.990
1.130
1.090
1.215
1.360
1.610
1.690
1.745
“H” Hex. “A” Max.
5/16”
1.230
7/16”
1.630
5/16”
1.210
7/16”
1.570
5/16”
1.240
7/16”
1.615
9/16”
1.900
9/16”
1.950
3/4”
2.395
3/4”
2.270
“W”
0.990
1.165
0.990
1.130
1.090
1.215
1.360
1.610
1.690
1.745
Right Angle Meter-In Controls
"W"
"G"
“D”
dia.
thru
hole
“H” hex
"A"
"A"
max.
"T"
Part No.
Tubing Size
PQ-CI04N
1/8”
PQ-CI04P
1/8”
PQ-CI05N
5/32”
PQ-CI05P
5/32”
PQ-CI08N
1/4”
PQ-CI08P
1/4”
PQ-CI08Q
1/4”
PQ-CI12Q
3/8”
PQ-CI12W
3/8”
PQ-CI16W
1/2”
Thread “T”
#10-32
1/8” NPT
#10-32
1/8” NPT
#10-32
1/8” NPT
1/4” NPT
1/4” NPT
3/8” NPT
3/8” NPT
"W"
In-Line Controls
Part No.
Tubing Size
PQ-FV04
1/8”
PQ-FV05
5/32”
PQ-FV06M
6 mm
PQ-FV08
1/4”
PQ-FV08M
8 mm
PQ-FV12
3/8”
PQ-FV16
1/2”
“D” Dia.
0.125
0.125
0.170
0.170
0.170
0.170
0.170
“G”
0.550
0.550
0.787
0.787
0.860
1.023
1.260
“A”
1.087
1.250
1.683
1.739
1.744
2.105
2.156
“W”
1.570
1.570
1.952
2.010
2.173
2.520
2.881
160
MANIFOLD FLOW CONTROLS
BFC-2A
BFC-4A
BFC-6A
BFC-8A
Block Flow Controls
BFC-A
IN
IN
BFC-B
IN
BFC-2B
BFC-4B
BFC-6B
BFC-8B
BFC-2AK
BFC-4AK
BFC-6AK
BFC-8AK
Precision flow controls
and needle valves available
in blocks for rigid mounting.
BFC-2BK
BFC-4BK
BFC-6BK
BFC-8BK
Specification same as MFC-3
IN
0.156
OUT
OUT
OUT
OUT
0.568
knob
(optional)
0.156
"L"
"M"
0.188
0.514
meter in inlet
0.438
0.875
mounting holes
0.161 dia.- thru typ.
0.500
0.239
meter out inlet
0.406
#10-32 thd. typ.
0.500 typ.
0.625
BFC-2C
Block Flow Controls
BFC-2CK
Two valves common meter in and meter out.
0.156
IN
knob
(optional)
OUT
0.568
1.312
1.000
0.156
0.514
0.688
0.875
0.406
0.500 typ.
0.239
0.625
Block Needle Valves
mounting
holes
0.161 dia.
- thru typ.
0.438
BNV-2N
BNV-2NK
BNV-4N
BNV-4NK
#10-32 thd. typ.
IN
OUT
OUT
BNV-6N
BNV-6NK
BNV-8N
BNV-8NK
0.514
Number of stations
2 - 2 Stations
4 - 4 Stations
6 - 6 Stations
8 - 8 Stations
"L"
"M"
0.188
0.438
0.875
0.500 typ.
BNM-2N
BNM-2NK
#10-32 thd. typ.
outlet
BNM-4N
BNM-6N
BNM-4NK BNM-6NK
BNM-8N
BNM-8NK
0.156
IN
OUT
mounting holes
0.161 dia.- thru typ.
0.406
0.625
Block Needle Manifolds
inlet
0.500
0.239
OUT
0.568
knob
(optional)
0.156
#10-32
thd.
inlet
0.514
0.188
"L"
"M"
0.438
0.875
0.218
0.625
161
B ❑ - ❑ ❑ ❑
Block
knob
(optional)
0.156
0.568
FC - Flow Control
NV - Needle Valve
NM - Needle Manifold
inlet/outlet
0.156
IN
Clippard’s block flow control and needle
valves have a variety of features that offer extra
versatility for unique applications. These precision made valves offer high performance, low
cost, reliability and ease of installation. Each
valve is independent of the other (except the
BFC-2C), sharing only a common body. This
allows separate pressures and/or gases to be
used while simplifying mounting. Each needle
adjustment is smooth, exact, and includes a
locking ring to prevent tampering. The valve
body is machined and anodized aluminum;
the compound angle needle stems are machined from 303 stainless steel; the valve
sleeve is electroless nickel plated brass; and
the seals are Nitrile rubber. Block flow controls and needle valves are ideal for controlling double acting cylinders.
0.188
0.406
0.500 typ.
#10-32 thd. typ.
outlet
mounting holes
0.161 dia. - thru typ.
A - Meter Out Flow
B - Meter In Flow
C - 2 Valves Common
Meter In and Meter Out
N - Needle Valve
Adjustment type
Blank - Screwdriver Slot
K - Adjustment Knob
Number of Stations
“X”
2
4
6
8
“L”
1.312”
2.312”
3.312”
4.312”
“M”
1.000”
2.000”
3.000”
4.000”
#10-32 SHUTTLE VALVES
Shuttle Valves
There are three models of shuttle valves offered by
Clippard. These valves feature a shuttle that allows flow
from one inlet to the outlet while blocking the other
inlet. They may be mounted directly to valves and
cylinders or in-line using the hose barbs on the MSV
models.
Poppet type shuttle
(double check) valve.
Brass body, and
poppet, Nitrile seal
Air Flow: 5.0 scfm @ 50 psig; 9.5 scfm @
100 psig
A
B
C
Operation: Flow from “A” to “C” or “B” to “C”
Pressure to Shift: 1/2 psig approx.
Exhaust: Through port where pressure
was last applied
RoHS
Note: Shuttle valves should not be used as a pressure selector
0.312
0.793
3/8" sq.
3/8" sq.
inlet "A"
0.563
inlet "B"
0.562
#10-32
thd. typ.
0.157
Part No.
MSV-1
Part No.
MSV-1M22
outlet "C"
1/16" I.D.
hose barb
typ.
0.156
#10-32 thd.
1.156
3/8" sq.
0.562
Part No.
MSV-1M44
1/8" I.D.
hose barb
typ.
0.156
#10-32 thd.
Part No.
MSV-1FFF
0.937
1.156
3/8" sq.
3/8" sq.
0.562
0.562
1/16" I.D.
hose barb
typ.
Part No.
MSV-1F22
#10-32 thd.
1/8" I.D.
hose barb
typ.
Part No.
MSV-1F44
#10-32 thd.
0.937
1.156
3/8" sq.
3/8" sq.
0.562
0.562
Part No.
MSV-1222
0.187
1/16" I.D.
hose barb
typ.
1/8" I.D.
hose barb
typ.
Part No.
MSV-1444
0.312
162
SHUTTLE VALVES
Poppet Type Shuttle Valves
Brass body, Delrin Poppet,
Nitrile seal
Input Pressure: 300 psig - air; 1,000 psig - hydraulic
RoHS
1/8" NPT typ.
Operation: Flow from “A” to “C” or “B” to “C”
C
A
Pressure to Shift: 1/2 psig approx.
0.968
B
C
A
B
Part No.
MJSV-1
0.312
5/8" sq.
Description
Poppet Shuttle Valve, 1/8” NPT
1.250
J-Series Shuttle Valves
0.750
Poppet type shuttle
(double check) valve.
Brass body, stainless
steel shuttle, Nitrile
seal
1/8" NPT typ.
0.969
50 scfm @ 100 psig
0.375
A
0.625
Part No.
JSV-2FPF
C
0.516
11/16" hex.
B
0.343
Pressure to Shift: 1 psig approx.
1/4" NPT
1/8" NPT
1/8" NPT typ.
0.750
0.750
1.281
1.469
0.375
0.375
0.625
11/16"
hex.
0.343
Part No.
JSV-2PFF
Part No.
JSV-2WFF
0.343
0.750
1/4" NPT typ.
0.750
0.625
11/16"
hex.
0.343
0.343
1/4" NPT
1/8" NPT
1.250
1.469
0.375
0.375
Part No.
JSV-2YFF
0.625
Part No.
JSV-2WYY
11/16" hex.
0.500
11/16" hex.
0.343
0.625
0.343
0.500
1/4" NPT typ.
0.750
0.750
1/4" NPT typ.
1.250
1.250
0.375
0.375
Part No.
JSV-2YWY
163
0.625
11/16"
hex.
0.500
0.625
Part No.
JSV-2YYY
11/16"
hex.
0.625
0.500
0.500
EXHAUST VALVES
Quick Exhaust Valve Application
In a typical application the exhaust valve is installed in the
inlet of a spring return or double acting pneumatic cylinder.
Supply air from a control valve is directed into the inlet port
of the exhaust valve. The Nitrile poppet seals the exhaust
port and allows air to flow from the outlet port of the valve
into the cylinder.
The pressurized air pushes against the piston and extends the
rod, compressing the spring, until full rod extension is
achieved.
When the control valve exhausts air from the exhaust valve
inlet port, the Nitrile poppet shifts to seal the inlet port and
open the exhaust port to the cylinder. The pressurized air is
allowed to exhaust directly through the exhaust valve to atmosphere.
Normally the air must travel back through the long air line
to the control valve to exhaust. By mounting the exhaust
valve directly on the cylinder, the piston retracts quickly
since the distance to atmosphere is very short and unrestricted.
Cylinder Retracts - Fast!
Cylinder Extends
Exhaust Valve
Poppet
Inlet Port
exhausts to atmosphere
Exhaust Port
Outlet Port
from
control
valve
control valve
signal removed
Poppet Quick Exhaust Valve
0.656
Medium: Air
0.406
Material: Brass body, Nitrile poppet
#10-32 outlet
0.31
0.125
Working Range: 15 to 150 psig
Air Flow: 5 scfm @ 50 psig; 9 scfm @ 100 psig (exhaust rate);
0.281
Mounting: Direct to cylinder
0.312
0.562
#10-32 inlet
Part No.
MEV-2
#10-32 exhaust
Description
Poppet Type Quick Exhaust Valve, #10-32
Pressure to Shift: @ 50 psig - opens after approx. 5 psig drop;
@ 3.5 bar - opens after approx. 0.350 bar drop
Note: Not for use with cylinders larger than 7/8” dia.; moderate
strokes up to 10”
Packaging Solutions
A leader in miniature pneumatics, Clippard provides the packaging industry a variety of produts and solutions. We understand the needs of
this industry, and are prepared to serve you with our expanding product
lines and expertise in applications.
• Conveying applications
• Case erectors
• Process solutions
• Bottle/container filling
• Palletizing
• Controls for a variety of applications
164
EXHAUST VALVES
J-Series Exhaust Valves
Clippard’s J-Series Exhaust Valve ofInlet Thread Size
fers a variety of design features and
2 - 1/8” NPT
provides fast response times and
4 - 1/4” NPT
high flow with 1/8” and 1/4” NPT
ports. This compact poppet type
valve is constructed of brass and is
100% tested to assure the highest
quality. The JEV’s primary function is
to increase cylinder speed. HowInlet Thread Type
ever, it also enables the use of J-Series Exhaust Valve
M - Male Thread
smaller directional valves, longer JEV - Inlet-to-Outlet 90° F- Female Thread
control lines and can be used as a
Orientation
shuttle valve. 32 versions available. JLEV - Inlet-to-Outlet
In-line Orientation
Outlet Thread Type
M - Male Thread
F- Female Thread
❑ ❑ ❑ ❑ - ❑ ❑ ❑ ❑ - ❑
1/8" NPT
exhaust
1/8" NPT inlet
IN
IN
EXH
EXH
1/8" NPT
exhaust
OUT
0.968
1.468
OUT
1/8" NPT
inlet
1.125
1/4" NPT
outlet
1/8" NPT outlet
Part No.
JEV-F2F2
Part No.
JEV-F2M4
1.125
1/8" NPT inlet
IN
1/8” NPT
inlet
1/8" NPT
exhaust
EXH
1.281
OUT
1/8" NPT
outlet
Exhaust
N - Unthreaded
Exhaust
Outlet Thread
Size
2 - 1/8” NPT
4 - 1/4” NPT
0.161 dia.
exhaust holes (2)
1/8” NPT
outlet
11/16”
hex.
1.125
1.592
Part No.
JLEV-F2M2-N
Part No.
JEV-F2M2
0.161 dia. exhaust
holes (2)
1/4” NPT
inlet
1/4" NPT inlet
IN
1/8" NPT
exhaust
EXH
1/4” NPT
outlet
11/16”
hex.
OUT
1.468
1.779
1.312
Part No.
JLEV-F4M4-N
1/4" NPT
outlet
Part No.
JEV-F4M4
1/4" NPT inlet
IN
EXH
OUT
1/8" NPT
exhaust
1.250
1.312
Part No.
JEV-F4F4
165
1/4" NPT
outlet
Features
• Enables use of smaller control valves
• 15 to 150 psig maximum
• Male outlet offers direct connection to cylinder
• 36 scfm @ 50 psig and 58 scfm @ 100 psig
• Low shift ratio
• 7 standard configurations
RoHS
• Custom configurations also available
• Brass construction with molded Nitrile seal
SPECIALTY COMPONENTS
Miniature Pulse Valves
2.281
2.156
A Normally-Open 3-way valve that closes shortly after being
pressurized and remains closed until supply pressure is exhausted
and repressurized. Widely used in control circuits.
0.812
0.406
0.375
1/8" NPT
7/8" hex.
additional
volume port
#10-32 outlet 2
1/8" NPT
2.281
2.156
#10-32 inlet 1
0.812
Medium: Air
0.406
Input Pressure: 40 to 150 psig max.
3
Mounting: 1/8” NPT thread; nut furnished
0.375
7/8" hex.
additional
volume port
2
Volume Chamber: #10-32
#10-32 outlet 2
Operation: Converts a continuous supply of inlet air into a pulse of
approximately 100 milliseconds
1/8" NPT
Response: 300 cycles per minute; time delay may be increased by adding
standard Clippard volume chambers not to exceed 3 cu. in.
Part No.
PV-1
PV-1P
Construction: Body - ENP brass, Seals - Nitrile rubber, Spring - stainless
steel, Poppet - Delrin®
#10-32 inlet 1
Description
Pulse Valve, #10-32
Pulse Valve, 1/8” NPT
Medium: Air only
Material: Brass
Mounting: Direct or in-line; Mounting clamp with MAT-20
and MAT-4.0
In-Line Volume Chamber
Used for providing a time delay in
pneumatic circuits
2
Chart @ 100 psig inlet pressure
#10-32 (M5) thd. both ends
1.8
1.6
1.4
Volume
Chamber
0.1
0.25
0.50
1.0
1.2
2.0
2.4
3.6
4.0
MAT-.1
MAT-.25
MAT-.50
MAT-1.0
R-821
MAT-2.0
R-821 (2)
R-821 (3)
MAT-4.0
Suffix
Bore
“L”
“D” Cu.In
1
1.2
1
0
0.042
0.117
0.8
0.1
0.074
0.180
0.6
0.25
0.124
0.245
0.5
0.210
0.350
1.0
0.390
0.450
1.2
0.580
0.700
2.0
0.760
1.000
0.1
3/8” 1.265” 0.437” 0.1
0.25
3/8” 2.640” 0.437” 0.25
0.5
9/16” 2.390” 0.625” 0.5
1.0
9/16” 4.390” 0.625” 1.0
2.4
0.950
1.300
2.0
15/16” 3.328”
1”
2.0
3.6
1.200
1.900
4.0
15/16” 6.234”
1”
4.0
4.0
1.500
N.R.
71
Time in Seconds
Volume
PV-1
R-711
R-
Volume
CU. IN.
The time delay of the PV-1, PV-1P
and R-711 may be increased by adding
standard Clippard volume chambers.
The charts show total TIME versus VOLUME for these combinations.
Time - Seconds
"D"
"L"
-1
PV
PV-1
R-711
0.4
0.2
0
0.1 0.25 0.5 1.0
1.2
2
2.4
3.6 4.0
Volume - CU. IN.
Part No.
Description
MAT-(size)
In-Line Volume Chamber, #10-32
Specify Size per Chart
R-821 volume charts are shown in the Modular Section of this catalog.
166
Piloted Actuated Water Drawback Valves
When this Normally-Closed valve closes a spring biased internal piston
draws back a small volume on outlet side (approx. 6-7” in 1/8”
I.D. tube) thus preventing overflow or dribbles. Ideal for use in
quenching or water spray applications.
2-Way N-C Whisker Valve
For use with bleed pressure piloted control circuits. Coil spring
stainless steel whisker is easily replaceable and can be formed to
different shapes.
#10-32 inlet 1
3/8"
hex.
#10-32 pilot
#10-32 outlet 2 #10-32 inlet 1
#10-32 pilot
0.531
7/16"
hex.
#10-32 outlet 2
1/8" NPT inlet 1
Medium: Water or Other Light Liquids
Pilot Pressure: 25 psig min.
Flow: 74 cu. in. H2O per min. @ 80 psig
Drawback: 0.07 cu. in. (1.2 ml)
Mounting: Mounts in-line
Part No.
WDV-2
WDV-2P
0.250
4.125
0.687 dia.
2.093
3/8"
hex.
0.312
0.312
1
0.687 dia.
1.843
5/16-24 thd.
1/8" NPT inlet 1
7/16"
hex.
0.250
4.312
Medium: Air
Air Flow: 1.0 scfmMWV-1P
@ 50 psig; 1.5 scfm @ 100
psig
Force For Full Stem Travel: 1/4 oz. approx.
Mounting: 5/16-24 male thread. Nut and lock
washers furnished
Bleed: To atmosphere around
whisker stem
RoHS
1
0.531
2
5/16-24 thd.
2
Description
Poppet Valve with Air Pilot, #10-32
Poppet Valve with Air Pilot, 1/8” NPT
Whisker: Stainless steel, approx. 3” length.
Replacement Part No. 12375
Normally-Closed 2-Way Pilot Sensor
For use with pressure piloted control circuits, can repeatedly detect
a position within 0.005” properly mounted. In jigs or fixtures it will
signal correct position and start-ok to control circuit.
Part No.
MWV-1
MWV-1P
Description
Normally-Closed Whisker Valve, #10-32
Normally-Closed Whisker Valve, 1/8” NPT
In-Line Fixed Orifice Air Chokes
Each choke is calibrated for
precise flow
0.687
5/16-24 thd.
#10-32 inlet 1
3/8" hex.
bleed 2
Medium: Air
0.125 dia.
Material: Brass
3/8" hex.
0.375
0.062 travel max.
0.093
1
2
Working Range: 0 to 300 psig max.
#10-32 thd.
both ends
1.218
1/8" NPT inlet 1
bleed 2
5/16-24 thd.
0.125 dia.
Part No.
MAC-A
MAC-B
MAC-C
MAC-D
Description
Air Choke, 0.0135” Hole, Yellow Disk
Air Choke, 0.010” Hole, Green Disk
Air Choke, 0.0075” Hole, Blue Disk
Air Choke, 0.006” Hole, Red Disk
0.062 travel max.
7/16" hex.
Medium: Air
0.375
0.093
1.437
Stem Travel: 1/16” max. (will open and close in as little as 0.005”)
Input Pressure: 300 psig max. Force For Full Stem Travel: 7 oz. nominal
Mounting: #15/16-24 thread. Nut and lockwashers furnished
Part No.
MPS-2
MPS-2P
167
Description
Poppet Valve with Pilot Sensor, #10-32
Poppet Valve with Pilot Sensor, 1/8” NPT
Materials: Brass body, Nitrile seals, stainless
steel stem and spring
Temperature Range: 32 to 230°F
Options: Consult the factory concerning the price
and availability of the following standard
options:
ENP - Electroless Nickel Plating
V - FKM Seals
E - EPDM Seals
Vacuum Gauge
Multi-Pin Air Indicator
Plunger type (when extended 7-pin color display signals “on”)
-15
-2
0
0
-1
-0.4
-0.6
VACUUM
-0.2
-25
-0.8
bar
-1.0 100XkPa
0.750
-5
1.863
0
0
0
-3
in
Hg
Gauge measures
pneumatic vacuum
pressure. Mounting
bracket included.
0.132
1.000
0.833
15/32-32 thd.
vent
#10-32
thd. inlet
15/32-32 thd.
vent
1/8" NPT
inlet
9/16" hex.
0.437
dia.
0.968
1.218
1.250
0.625 dia.
0.625 dia.
1.500
Medium: Air Only
Range: Scale reading from
0 to 30” Hg. and 0 to -1 bar
0.385
Construction: Nickel-plated steel
case. Plastic face. Dial shows
two ranges; Hg in black. bars
in red. Built-in pressure snubber.
1.156
#6-32 thd.
1/8-27 NPT
1.600
#10-32 female thd.
Ports: Connection located at rear is double threaded O.D. - male
thread 1/8” NPT, I.D. - tapped for #10-32 fitting
Minimum Actuation Pressure: 15 psig approx.
RoHS
Response: Approx. 10 milliseconds @ 50 psig
Filtration: 40 micron recommended
Mounting: IND-3: Panel mount in hole. #15/32-32 nut and lockwasher
provided; IND-3P: Direct mount into 1/8” NPT hole
Mounting: Stud mount using 1/8” NPT center stud or panel mount
using the zinc plated steel bracket supplied.
Part No.
VG-30
Description
Vacuum Gauge
Pressure Gauges
Maximum Panel Thickness: 3/16”
Part No.
IND-3-(color)
IND-3P-(color)
0.665
Description
Multi-Pin Air Indicator, #10-32
Multi-Pin Air Indicator, 1/8” NPT
50
40
30
3
60
5
1
GN-Green, WH-White, RD-Red, YL-Yellow
10
0.843
70
4
2
20
80
6
0
kg/cm2
PSIG
90
7
0
1.625 dia.
100
1/8" NPT
0.656
1.600 dia.
Single Pin Air Indicator
Gauge measures pneumatic system pressure. Stud mounted.
Plunger type (when extended white pin display signals “on”)
nut (2) supplied
0.062
1/4-40 thd.
#10-32 thd.
#10-32
female thd.
5/16" hex.
Range: Scale reading from 0 to 100 psig and 0 to 6.9 bar
Construction: Steel case. Plastic face. Dial shows two ranges; psig in
black. Bars in red. Built-in pressure snubber.
thread 1/8” NPT; I.D. - tapped for #10-32 fitting
0.080 dia.
Mounting: Direct with 1/8” NPT
0.055
Part No.
IND-1-WH
0.438
0.187
1/4" hex.
Description
Single Pin Air Indicator
Part No.
Description
PG-101-BK Pressure Gauge, Black Case
PG-101-NP Pressure Gauge, Nickel-Plated
#10-32 thd.
50
40
30
3
60
0.080 dia.
70
4
2
0.750
5
20
1
10
0
80
6
0
2
k g /c m
1.780 dia.
0.125
1.000
0.843
90
P S IG7
100
0.375
0.656
0.055
0.465
0.160
1/4" hex.
1.156
1.630 dia.
Part No.
Description
IND-1M-WH Single Pin Air Indicator
Gauge measures pneumatic system pressure.
Mounting bracket included.
Medium: Air Only
Input Pressure: Scale reading from 0 to 100 psig and 0 to 6.9 bar
Minimum Actuation Pressure: 12 psig approx.
Response: Approx. 10 milliseconds @ 50 psig
Filtration: 40 micron recommended
Mounting: IND-1-WH: Panel mount 1/4 dia. hole. 1/4-40 thd.
nuts provided. IND-1M-WH: Direct mount into #10-32 port
Maximum Panel Thickness: 3/16”
#6-32 thd.
1/8" NPT
#10-32
female thd.
Construction: Nickel-plated steel case. Plastic face. Dial shows two
ranges; psig in black. Bars in red. Built-in pressure snubber.
thread 1/8” NPT I.D. - tapped for #10-32 fitting
Mounting: With zinc plated steel bracket supplied
Part No.
PG-100
Description
Pressure Gauge
168
PNEUMATIC COUNTER
2.087
6-Digit Pneumatic Totalizing Counter
1.496
0.174
The PT-1SM is a 6-digit pneumatic totalizing
counter. A pneumatic signal or impulse adds
the value of 1 to the display. When the indicator reaches its maximum value, the
counter starts again at zero The counter my
be reset manually be depressing the reset
push button, or by an air impulse. The
counter is useful for event recording, piece
or part counting, for indicating program
steps, cycle counting, machine time logging,
and many other purposes. The PT-1SM is designed for surface mounting.
1.024
0.138
0.197
3.937
3.150
3.543
#10-32 thd. typ.
Display: 6 figures, numerals 0.080” to 0.160”
Part No.
PT-1SM
Medium: Filtered compressed air containing no oil
Reset: Manual push button and pneumatic spring return
Description
6-Digit Pneumatic Totalizing Counter
Input Pressure: 30 to 120 psig
Mounting: Surface mount
Pneumatic Counter Solutions
Pneumatic counters are used in a variety of pneumatic applications including filling machines, cut counting, stamping, multispindle operations and more. They count pulses generated by
cylinders, push buttons, pedals, and other actuation devices.
Clippard’s 6-digit totalizing counter can be found in many
places throughout their manufacturing operations.
4-Spindle Turret Operation
Date Stamping Operation
169
PNEUMATIC PROXIMITY SENSORS
Non-Contact Air Proximity Switch
Non-Contact Air Proximity Switch with no
moving parts; will sense any flat or curved object
which presents a sensing surface of 1/4” or more to
the sensing nozzle
0.875
0.625
supply
0.100" (2.5)
#10-32 thd. supply
sensing jet
interrupted
output
0.312
Medium: Air
Nominal Proximity Distance: 0.100”
RoHS
Output Signal at 4 psig supply: Normal: -2” H2O
actuated: 7 1/2” H2O
Frequency Response: 500 CPM
Air Consumption: 0.3 scfm
Sensing Capability: Flat or curved surfaces with 1/8”
minimum radius
Connections: #10-32 female
Construction: Solid brass bright dipped
0.437
#10-32 thd. outlet
0.375
15/32-32 thd.
Output in Inches Water
0.750
supply
sensing jet
uninterrupted
Sensing
Distance
R
output
A
P
MAR-1-2
1022
X
output
View additional
information and
useful videos
supply
2010
Part No.
1022
Description
Non-Contact Air Limit Switch, #10-32
Non-Contact Gap Sensor
Medium: Air
Non-Contact Gap Sensor will sense any flat or round
object with a 1/32” minimum radius. Produces a
positive signal when no object is present and a negative
signal when an object interrupts its sensing system
0.750
sensing gap
0.375
0.125
0.437
0.875
OUT
1030
MAR-1-2
0.250
#10-32
thd. inlet
0.625
Frequency Response: 1,000 cpm
Air Consumption: 1/4 scfm @ 4 psig
Sensing Capability: Flat or curved surfaces with
1/32” minimum radius. May be used for up to 4”
gap with an additional auxiliary jet
Construction: Solid brass bright dipped
X
30
Positive output
no object present
25
0.375
1.250
Output: -3” to 26” H2O @ 4 psig
Connections: #10-32 female
IN
#10-32
thd. outlet
Input Pressure: 0.5 to 5 psig
output
supply
20
0.136 dia. mtg. holes
2010
object sensed
15
no object present
View additional
information and
useful videos
negative signal
Part No.
1030
Output inches of H2O
10
Input inches of Hg
5
0
1
2
3
4
5
6
7
8
9
10
-5
-10
Negative output
object being sensed
positive signal
Description
Non-Contact Positive Pressure Sensor, #10-32
170
DIFFERENTIAL PRESSURE SENSORS
Normally-On Single Stage Pressure Repeater
Medium: Reference pressure - air sensed
pressure - Air, gas, or liquid
Normally-On Single Stage Pressure Repeater for off-on
control of an adjustable reference pressure when a
sensed pressure moves above or below the reference
pressure level
Air Flow: 0.029” orifice
Response Time: 5 milliseconds
Differential Sensitivity: 2%
Frequency Response: 60 Hz
1.370 dia.
Materials: Anodized aluminum body, Nitrile
diaphragms
Part No.
1043
#10-32 thd. adjustable
reference pressure
adjustable reference pressure
adjustable reference pressure
#10-32 thd.
sensed pressure
0.656
sensed
pressure
Description
Single Stage Pressure Repeater
sensed
pressure
0.866
output on
Below
Reference
bleed
restrictor
output off
#10-32 thd. output
Above
Reference
0.010 dia. bleed
restrictor
Normally-Off Two Stage Pressure Repeater
bleed
restrictor
Medium: Reference pressure - air sensed pressure Air, gas, or liquid
Normally Off Two Stage Pressure Repeater for offon control of an adjustable reference pressure when a
sensed pressure moves above or below the reference
pressure level
Air Flow: 0.029” orifice
Differential Sensitivity: 2%
Frequency Response: 60 Hz
Materials: Anodized aluminum body, Nitrile
diaphragms
1.370 dia.
Part No.
1044
adjustable
reference
pressure
#10-32 thd. adjustable
reference pressure
sensed
pressure
0.656
sensed
pressure
Description
Two Stage Pressure Repeater
adjustable
reference
pressure
#10-32 thd.
sensed pressure
sensed
pressure
1.302
sensed
pressure
output off
output on
1.092
Below
Reference
bleed restrictor
171
Above
Reference
bleed
restrictor
#10-32 thd.
sensed pressure
0.010 dia. bleed restrictors
bleed
restrictor
bleed restrictor
#10-32 thd. output
SPECIAL PILOTED 3-WAY VALVES
3-Way Normally-Closed Amplifier Valves
Medium: Air
3-Way Valve Normally-Closed Interface amplifies very low pressure
air-jet sensing signals to working power levels
Material: Anodized aluminum body,
Nitrile diaphragms
1.359 dia.
#10-32
control port
Air Flow: 22 scfm @ 100 psig;
Pilot Pressure: 4” H2O @ 100 psig
1/8" NPT
load port
1.109
Maximum Allowable Pilot
Pressure: 5 psig
1.562
1/8" NPT
exhaust port
Response Time: 10 milliseconds dead
headed
0.609
1/8" NPT
supply port
Operating Speed: 50 Hz
Top View
Side View
Bleed: 0.1 scfm @ 100 psig
Pilot
(w/o pressure)
Pilot
(w/pressure)
Exhaust
(open)
Supply
(blocked)
Load
(open to
exhaust)
Ports: Load - 1/8” NPT female
Supply - 1/8” NPT female
Exhaust - 1/8” NPT female
Control - #10-32 female
Exhaust
(blocked)
Supply
(open to
outlet)
Part No.
2010
Description
Normally-Closed
Interface, 1/8” NPT
Load
(open)
Valve Closed
Valve Open
3-Way Bleed Pressure Piloted Limit Valves
Medium: Air
3-Way Bleed Pressure Piloted Limit Valve; blocking of the sensing
port causes rapid valve opening
1.359 dia.
Nitrile diaphragms
2.000
1/8" NPT
load port
1.109
1.203
1/8" NPT
exhaust port
Ports: 1/8” NPT
0.609
Part No.
2011-1
1/8" NPT
supply port
Top View
Description
Piloted Limit Valve,
1/8” NPT
Side View
Bleed (open)
Rubber Nozzles
#10-32 rubber
nozzles for replacement 2011-1 limit
valves. #10-32 thread,
five to a package
Bleed (closed)
2011-1
Supply
(blocked)
Exhaust
(open)
Exhaust
(blocked)
Load
(open to
exhaust)
Load
(open)
0.031 dia.
0.125 dia.
0.312
dia.
Valve Closed
0.187
0.406
#10-32 UNF-2A thd.
Valve Open
Note: Supplied with threaded bulkhead mount and integral rubber nozzle for direct actuation by
mechanical closure. By removing rubber nozzle and inserting a #10-32 fitting and length of
hose, 2011-1 can be converted to a remote sensing valve.
25˚
Part No.
2011-012
Description
Rubber Nozzles
172
3-Way N.O. or N.C. Air-Piloted Valves
Medium: Air
Nitrile diaphragms
Minimum Pilot Pressure:
N.O. - 90% of supply pressure
N.C. - 60% of supply pressure
Response Time: 15 milliseconds after pilot
pressure reaches switch point
Operating Speed: 1,100 CPM
1.359 dia.
1/8" NPT
control port
1.703
1/8" NPT
load port
1.109
1.203
0.609
1/8" NPT
supply port (n.c.)
exhaust port (n.o.)
1/8" NPT
exhaust port (n.c.)
supply port (n.o.)
Top View
Side View
Part No.
2012
2012-VAC
Control
(w/pressure)
Control
(w/o pressure)
2012-G
Exhaust
(open)
Exhaust
(blocked)
Supply
Load (open to
(open to outlet)
exhaust)
Supply
(blocked)
Valve Closed
Load
(open)
Flat Bracket
Flat mounting bracket
available. See page 146.
Part No.
2010-050
Valve Open
Description
Piloted Valve, 1/8” NPT
Valve for Vacuum Operation
(requires positive pressure
pilot signal)
Valve for Liquid Adhesives
(silicone diaphragm and
seals), 1/8” NPT
Description
Flat Bracket
3-Way N.O. or N.C. Electronically Piloted Valves
Medium: Air
Nitrile diaphragms
Filtration: 10 micron
Frequency Response: 50 Hz @ 100 psig
70 Hz @ 30 psig
Switching Speed: 10 milliseconds
Leads: 28 gauge stranded PVC insulated
Continuous Overload: 350% @ 25˚C
ambient; 250% @ 50°C ambient
3-Way Normally-Closed Electronic Valve with lowpower DC solenoid can be directly converted to high
pressure pneumatic power without electronic
amplification.
1.359 dia.
#10-32
control port
12"
leads
1.640
1/8" NPT
load port
1.109
1/8" NPT
exhaust port
0.609
Power Consumption: less than 0.50 watts
at rated voltage 80 ma. @ 6V
40 ma. @ 12V
20 ma. @ 24V
1/8" NPT
supply port
Top View
Solenoid
(w/o power)
Side View
Solenoid
(w/power)
Part No.
2013-6
2013-12
2013-24
Exhaust
(open)
Supply
(blocked)
Load
(open to
exhaust)
Valve Closed
173
Exhaust
(blocked)
Supply
(open to
outlet)
Load
(open)
Description
Valve, 6 Volts DC, 1/8” NPT
Flat Bracket
Part No.
2010-050
Description
Flat Bracket
Valve Open
3-Way Normally-Closed Pressure Piloted Valve
Medium: Air
Designed to be piloted by a Clippard EV or ET
manifold mount electronic valve. Output from
the EV/ET actuates the valve to produce outputs
up to 22 scfm at 100 psig. Combines low
wattage, long life and cool running of the EV/ET
valves with quick response and high flow of
Clippard booster type valves.
The 2020 and 2021 are identical in all
respects except one. The 2020 has an external
#10-32 port for the pressure supply to the EV/ET electronic pilot valve. The 2021 has an
internal pressure supply to the EV/ET.
#10-32 pilot valve
mounting hole
#10-32 pilot supply
1.359 dia.
0.343
1/8" NPT
load port
1.109
RoHS
Pilot Pressure: 60% of supply pressure, minimum
Response Time: Approx. 20 milliseconds
Mounting: Mounting holes provided
Materials: Anodized aluminum, stainless
steel
Part No.
2020
2021
Description
Piloted Valve, Ext. Port
Piloted Valve, Int. Port
Part No.
2013-6
2013-12
2013-24
Description
1.562
1/8" NPT
exhaust port
Flat Bracket
0.609
1/8" NPT
supply port
#8-32
mounting holes
Top View
Side View
2020 shown with ET Pilot Valve
and external pilot supply
Part No.
2010-050
Description
Flat Bracket
Pressure Piloted Snap Action Amplifying Valve
Medium: Air
Provides a sharp, clean output signal, even with slow-changing
pressure input signals; output is stabilized without chatter or
oscillation.
#10-32
thd. signal
#10-32 thd. load
0.312
#10-32
thd. supply
Minimum Pilot Pressure: 1.5” H2O psig
Maximum Pilot Pressure: 1 psig (28”
H2O”)
Air Flow: 0.18 scfm @ 100 psig;
Bleed Orifice Diameter: 0.010”
1.140
Part No.
3200-A
Description
Amplifying Valve, #10-32
1.340 dia.
Top View
Side View
Bottom View
exhaust
positive
output
negative
output
control
signal
supply
pressure
supply
pressure
normal
Bracket for Action Relays
Mounting bracket for
snap action relays
Part No.
2010-050
Description
Flat Bracket
actuated
174

Control Valves

Transcription

Similar documents

288-327 Fittings_279-318 fittings

2013 : productcata lo gue

parts list - Hendrickson

Needle Valves