docfrequently used paints
download 
Report Transcription
frequently used paints
FREQUENTLY USED PAINTS A GUIDE TO Hempel’s FREQUENTLY USED PAINTS This overview presents paints designated for anticorrosion protection, produced at Hempel’s state of the art manufacturing sites, these products are widely available. Other paints for a wide variety of purposes, unique to local assortments and custom coatings are not included here. To obtain detailed information, specifications and pricing for a particular project, please contact your local sales representative or local Hempel office. Legend: Waterborne Micaceous Iron Oxide Multi-tint AIR Spray Airless Spray spatula Brush Protecting Your Investments HEMPEL’S MULTI-TINT® System Hempel was founded in Denmark in 1915 by J. C. Hempel, who introduced the concept of ready-made marine paints. Over the years we have expanded our original product portfolio and services into many other coatings and markets. The company has grown to become the largest independent supplier of coatings for the protective, marine, container, yacht and decorative market segments. HEMPEL’S MULTI-TINT® System is a volumetric tinting system developed by Hempel in 1993 as a tool for meeting customers’ demands for special colours from international colour standards, such as RAL, British Standard 381C and BS-4800, NCS, Munsell plus other international and customer colours. Drawing on decades of experience from the marine market segment, Hempel’s range of protective coatings has been developed to provide our customers with a total system for the protection of steel and concrete structures such as bridges, civil constructions, airports, cranes, downstream and upstream facilities, pipelines, chemical and power plants, onshore and offshore wind farms, railway carriages, mining plants and many other facilities. Hempel produces a wide range of solvent-borne, solvent-free and waterborne coatings, intumescent coatings for passive fire protection as well as specialised paints for specific conditions. Our coatings deliver proven, long-term effectiveness, protecting components in even the most challenging environments. To find out more visit us at www.hempel.co.uk. HEMPEL’S MULTI-TINT® Solvent-borne System includes a set of 14 tinting pastes, enabling Hempel to make lead and lead-free colours and comprises of some 3,500 different colour recipes from international colour standards. HEMPEL’S MULTI-TINT® Waterborne System includes a set of 12 tinting pastes, all of them lead-free and comprises of some 950 different colour recipes from international colour standards. For further information please contact your local Hempel office. Numerous testing and research institutions have given their approval to Hempel’s paints. The products are certified for various operating conditions and meet today’s regulatory requirements. PRODUCT FEATURES RECOMMENDED USE SHADE FINISH Alkyds VOLUME SOLIDS %* VOC DRY TO TOUCH 20°C THEORETICAL SPREADING RATE DFT RANGE HEMPALIN PRIMER 12050 • Contains zinc phosphate • Complies with EU Directive 2004/42/EC High performance one component primer for HEMPALIN systems. 40760 / green matt 49 407 g/l 2 - 4 hours 12.3 m2/l 40 µm 30 - 50 µm HEMPAQUICK PRIMER 13624 • Fast-drying • Contains zinc phosphate Rust-preventing primer for steel and machinery parts. Workshop primer for temporary protection. 12170 / grey matt 47 471 g/l approx. 1 hour 5.9 m2/l 80 µm 40 - 80 µm HEMPEL’S SILVIUM 51570 • Contains aluminium • Good light reflection Topcoat for exterior and interior steel, woodwork and moderately hot surfaces. 19000 aluminium glossy 38 506 g/l approx. 5 hours 15.2 m2/l 25 µm indicated dft: 25 µm • Weather resistant • Flexible • Resistant to salt water, mineral oil spillage and aliphatic hydrocarbons • Complies with EU Directive 2004/42/EC One component, high performance topcoat for engine rooms, tank tops, main engines and auxiliary machinery. glossy 46 430 g/l 6 - 8 hours 15.3 m2/l 30 µm 30 - 40 µm • Fast-drying • Good gloss and colour retention Glossy topcoat over suitably primed steel substrates. glossy 40 498 g/l 1 hour 10 m2/l 40 µm indicated dft: 40 µm PRODUCT FEATURES RECOMMENDED USE VOC DRY TO TOUCH THEORETICAL SPREADING RATE DFT RANGE HEMPALIN ENAMEL 52140 HEMPAQUICK ENAMEL 53840 10000 / white 10000 / white SHADE FINISH Acrylics VOLUME SOLIDS %* 20°C HEMUCRYL PRIMER HI-BUILD 18032 • Fast-drying • Good anticorrosive properties • Complies with EU Directive 2004/42/EC Primer in waterborne systems, for interior and exterior steelwork, hot dip galvanised steel, aluminium, and stainless steel. 12170 / grey matt 43 41 g/l 1.5 hours 5.7 m2/l 75 µm 50 - 100 µm HEMPATEX HI-BUILD 46410 • Physically drying • Good colour retention •R esistant to splashes of salt water, water, aliphatic hydrocarbons, animal and vegetable oils • Contains zinc phosphate Primer, intermediate coat or topcoat for HEMPATEX systems. Selfprimed repair and touch-up coating or topcoat for containers. 11480 / grey matt 42 511 g/l approx. 4 hours 4.2 m2/l 100 µm 75 - 125 µm * the values variance is ± 1% ALKYDS/ACRYLICS ACRYLICS/EPOXIES EPOXIES EPOXIES/intumescents ZINC-SI/POLYURETHANEs Thinners Ral / hempel colours 3 PRODUCT FEATURES RECOMMENDED USE SHADE FINISH Acrylics HEMPEL‘S PRO ACRYLIC 55880 • Isocyanate-free • Good gloss and colour retention • Resistant to water and aliphatic hydrocarbons spillage Topcoat for the protection of structural steel. HEMPATEX ENAMEL 56360 • Contains non-chlorinated plasticiser • Good gloss and colour retention • Physically drying • Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils Topcoat for interiors and exteriors on HEMPATEX systems. HEMUCRYL ENAMEL HI-BUILD 58030 • Weather resistant • High gloss retention • Fast-drying • Complies with IMO resolution MSC 61 (67) standard • Complies with EU Directive 2004/42/EC Topcoat for interiors and exteriors in waterborne systems in up to C4 corrosive environments. PRODUCT FEATURES RECOMMENDED USE VOLUME SOLIDS %* DRY TO TOUCH DFT RANGE 20°C THEORETICAL SPREADING RATE glossy 60 394 g/l approx. 8 hours 12 m2/l 50 µm indicated dft: 50 µm semi-gloss 31 606 g/l 3 - 4 hours 8.9 m2/l 35 µm indicated dft: 35 µm glossy 44 5 g/l 1.5 hours 5.9 m2/l 75 µm 50 - 100 µm VOC DRY TO TOUCH 10000 / white 19990 / black 10000 / white SHADE VOC FINISH EPOXIES VOLUME SOLIDS %* 20°C THEORETICAL SPREADING RATE DFT RANGE • Contains zinc phosphate • Quick drying, fast handling Shopprimer for the protection of blastcleaned steel plate and other structural steel during the storage and building period. 50890 / red matt 22 659 g/l 5 - 10 minutes 10.5 m2/l 20 µm 20 - 25 µm HEMPADUR 15553 • Excellent adhesion properties • Abrasion and impact resistant • Contains zinc phosphate • Application temperature from -10°C • Complies with EU Directive 2004/42/EC Primer for HEMPATEX, HEMPADUR and HEMPATHANE systems, on hot dipped galvanised surfaces, aluminium and stainless steel. Applicable when roughening of the surface is not possible. 11630 / off-white matt 55 389 g/l approx. 3 hours 11 m2/l 50 µm 50 - 80 µm HEMPADUR 1555E • Polyamide-adduct cured • Good adherence • Abrasion and impact resistant • Contains zinc phosphate • Application temperature from -10°C Primer for HEMPATEX, HEMPADUR and HEMPATHANE systems on steel and for hot dipped galvanised surfaces, aluminium and stainless steel. 22430 / cream matt 40 531 g/l approx. 3 hours 10 m2/l 40 µm 30 - 50 µm HEMPADUR FAST DRY 15560 • Fast-drying • Contains zinc phosphate • Complies with EU Directive 2004/42/EC Primer or intermediate coat for HEMPADUR systems and on-site work. matt 62 351 g/l 1 - 1.5 hours 6.2 m2/l 100 µm 75 - 150 µm HEMPEL‘S SHOPPRIMER E 15280 ALKYDS/ACRYLICS ACRYLICS/EPOXIES 12170 / grey EPOXIES 12430 / MIO reddish grey EPOXIES/intumescents ZINC-SI/POLYURETHANEs Thinners * the values variance is ± 1% Ral / hempel colours 4 PRODUCT FEATURES RECOMMENDED USE SHADE FINISH EPOXIES HEMPADUR 15570 VOLUME SOLIDS %* VOC DRY TO TOUCH 20°C THEORETICAL SPREADING RATE DFT RANGE • Polyamide-adduct cured • Highly corrosion resistant • Application temperature from -10°C • Complies with EU Directive 2004/42/EC • Shade 21780 contains zinc phosphate Maintenance and repair primer, intermediate coat and topcoat in HEMPADUR systems. Suitable as a (blast) primer in epoxy systems and mist coating on GALVOSIL. 12430 / MIO reddish grey matt 54 414 g/l approx. 3 - 4 hours 5.4 m2/l 100 µm 50 - 125 µm HEMPADUR ZINC 17340 • Zinc rich content • Corrosion resistance • Application temperature from -10°C • Complies with SSPC-Paint 20, type 2, level 3 and EU Directive 2004/42/EC Primer for steel. Zinc-shopprimed steel, where damaged spots, welds etc. have been power tool cleaned. On-line application for containers. 19830 reddish grey semi-matt 66 324 g/l 3 hours 13.2 m2/l 50 µm 50 - 75 µm HEMPADUR ZINC 17360 • Zinc rich content • Fast-drying • Cathodic protection of local mechanical damage • Hardwearing and highly weather resistant • Application temperature from -10°C • Complies with SSPC-Paint 20, type 2, level 2, ISO 12944-5 and EU Directive 2004/42/EC VOC-compliant versatile, long-term primer on steel for epoxy, vinyl and acrylic systems. 19830 reddish grey matt 65 332 g/l 1 hour 13 m2/l 50 µm 50 - 75 µm • Zinc rich content • Cathodic protection of local mechanical damage • Fast-drying • Application temperature from -10°C • Complies with NORSOK M-501, rev. 5, system no. 1 High solids, versatile, long-term primer on steel for epoxy systems, in up to C5 corrosive environments. Suitable for use as part of a NORSOK M-501 system 1 approved paint system. 10830 / grey matt 60 340 g/l 1 hour 12 m2/l 50 µm 50 - 75 µm • Fast-drying • Contains zinc phosphate • Application temperature from -10°C Primer, intermediate coat or topcoat in epoxy systems in up to C5 corrosive environments. Topcoat: only where yellowing and chalking are acceptable. 11480 / grey semi-gloss 74 238 g/l approx. 1.5 hours 7.4 m2/l 100 µm 80 - 125 µm • Rust-inhibiting • Contains zinc phosphate • Complies with EU Directive 2004/42/EC A two component, waterborne primer. 12170 / grey semi-gloss 51 22 g/l approx. 4 hours 6.8 m2/l 75 µm 50 - 100 µm HEMPADUR PRO ZINC 17380 HEMPADUR FAST DRY 17410 HEMUDUR 18500 * the values variance is ± 1% ALKYDS/ACRYLICS ACRYLICS/EPOXIES EPOXIES EPOXIES/intumescents ZINC-SI/POLYURETHANEs Thinners Ral / hempel colours 5 PRODUCT FEATURES RECOMMENDED USE SHADE FINISH EPOXIES VOLUME SOLIDS %* VOC DRY TO TOUCH 20°C THEORETICAL SPREADING RATE DFT RANGE HEMPADUR MULTISTRENGTH GF 35870 • Reinforced with glass flakes • Impact and abrasion resistant • Resistant to seawater, mineral oils, aliphatic hydrocarbons and petrol splashes • Resistance to early immersion in water • Low VOC Self-priming system, interior lining for crude oil and fuel oil storage tanks. 19990 / black glossy 87 188 g/l approx. 6 hours 2.5 m2/l 350 µm 350 - 500 µm HEMPADUR 45141 • Low water permeability • Abrasion and impact resistant • Resistant to seawater, mineral oils, aliphatic hydrocarbons, petrol splashes and related products • Complies with EU Directive 2004/42/EC and BS 476: Part 7: 1997 standard Self-priming system, intermediate coat, topcoat, ballast tank or repair and maintenance work coating. 50630 / red semi-gloss 60 371 g/l approx. 7 hours 4 m2/l 150 µm 125 - 175 µm • Good wetting properties • Low water permeability • Abrasion and impact resistant • Resistant to seawater, mineral oils, aliphatic hydrocarbons, petrol splashes and related products • Harmless to grain cargoes • Application temperature from -10°C • Complies with EU Directive 2004/42/EC and BS 476: Part 7: 1997 standard Self-priming system, intermediate coat, topcoat, ballast tank or repair and maintenance work coating. 50630 / red semi-matt 60 371 g/l approx. 11 hours 5°C 4 m2/l 150 µm 125 - 175 µm HEMPADUR FAST DRY 45410 • Fast-drying • Contains zinc phosphate • Complies with EU Directive 2004/42/EC Topcoat in up to C4 corrosive environments, or a one coat direct-to-metal system. semi-matt 65 331 g/l 2 hours 8.1 m2/l 80 µm 80 - 125 µm HEMPADUR MULTISTRENGTH 45751 • Abrasion and corrosion resistant • Low VOC • Corrosive category C5 • Complies with NORSOK M-501, system no. 7. and EU Directive 2004/42/EC Self-priming topcoat and heavy duty system for ramps, decks and ship hulls. semi-gloss 79 254 g/l 7 - 8 hours 4 m2/l 200 µm 150 - 250 µm • Good wetting properties • Prolonged recoating intervals • Low VOC • Application temperature from -5°C Self-priming, multipurpose, surface tolerant, intermediate coat or topcoat in heavy duty systems, immersion service, maintenance and minor repairs. ** semi-gloss 80 217 g/l approx. 4 hours 6.4 m2/l 125 µm 125 - 200 µm HEMPADUR 45143 HEMPADUR MASTIC 45880 12170 / grey 12340 / grey 12170 / grey 12430 / MIO reddish grey *** * the values variance is ± 1% ** Directly applicable on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping. *** Aluminium pigmented shade 19870 / dark alu and 19000 / light alu ALKYDS/ACRYLICS ACRYLICS/EPOXIES EPOXIES EPOXIES/intumescents ZINC-SI/POLYURETHANEs Thinners Ral / hempel colours 6 PRODUCT FEATURES RECOMMENDED USE SHADE FINISH EPOXIES HEMPADUR MASTIC 45881 • Good wetting properties • Prolonged recoating intervals • Low VOC HEMPADUR MASTIC 4588W Self-priming, multipurpose, surface tolerant, intermediate coat or topcoat in heavy duty systems, immersion service, maintenance and minor repairs. Warm climate version of 45880. ** VOLUME SOLIDS %* DRY TO TOUCH 20°C THEORETICAL SPREADING RATE DFT RANGE semi-gloss 80 220 g/l 3 hours 30°C 6.4 m2/l 125 µm 125 - 200 µm semi-gloss 80 198 g/l 12 hours 5°C 4 m2/l 200 µm 125 - 200 µm 12170 / grey 12430 / MIO reddish grey VOC *** 12170 / grey • Good wetting properties • Short recoating interval • Low VOC • Application temperature from -10°C Self-priming intermediate coat in heavy duty systems in atmospheric exposure. HEMPADUR 47140 • Polyamide-adduct cured • Fast-drying • Complies with EU Directive 2004/42/EC Primer, intermediate coat or topcoat in epoxy systems in up to C5 corrosive environments. ** 20450 /cream RAL 9001 semi-gloss 70 298 g/l approx. 2 hours 5.6 m2/l 125 µm 80 - 150 µm HEMPADUR UNIQ 4774A • Polyamide-amine cured • Abrasion and corrosion resistant • Over-coatable with a wide range of epoxy and polyurethane coatings • Application and curing temperatures from -10°C • Low VOC Universal self-priming and high performance primer for general use. 20450 / cream semi-gloss 76 246 g/l 4 hours 5.1 m2/l 150 µm 100 - 200 µm HEMPADUR ZP 47940 • Polyamide-adduct cured • Contains zinc phosphate • Low VOC • Fast-drying Primer in epoxy systems in atmospheric exposure. 12170 / grey semi-gloss 76 250 g/l approx. 2 hours 6.1 m2/l 125 µm 100 - 150 µm HEMPADUR MIO 47950 • Polyamide-adduct cured • Low VOC • Fast-drying • High load of MIO pigment Intermediate coat or topcoat in epoxy systems in atmospheric exposure. 12130 / MIO grey semi-gloss 76 251 g/l approx. 2 hours 6.1 m2/l 125 µm 100 - 150 µm 12430 / MIO reddish grey *** * the values variance is ± 1% ** Directly applicable on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping. *** Aluminium pigmented shade 19870 / dark alu and 19000 / light alu ALKYDS/ACRYLICS ACRYLICS/EPOXIES EPOXIES EPOXIES/intumescents ZINC-SI/POLYURETHANEs Thinners Ral / hempel colours 7 PRODUCT FEATURES RECOMMENDED USE SHADE FINISH EPOXIES HEMPADUR 47960 • Polyamide-adduct cured • Low VOC • Contains zinc phosphate • Fast-drying • Prolonged recoating intervals Primer, intermediate coat or topcoat in epoxy systems or a one coat selfpriming system in up to C4 corrosive environments. ** HEMPADUR 85671 • High chemical resistance • Amine-adduct cured • Phenolic content • Very good adhesion • High temperature and water resistant • Complies with ARAMCO’s specification APCS 2A, 2B and 2C HEMPADUR MASTIC 8588E VOLUME SOLIDS %* VOC DRY TO TOUCH 20°C THEORETICAL SPREADING RATE DFT RANGE 11480 / grey semi-gloss 75 245 g/l approx. 2 hours 6 m2/l 125 µm 80 - 125 µm A lining for potable water tanks, chemical tanks, pipe lines and under insulation. 11150 light grey matt 68 316 g/l 4 - 6 hours 6.8 m2/l 100 µm indicated dft: 75 - 125 µm • Polyamide-adduct cured • Good wetting properties • Prolonged recoating intervals • Application temperature from -5°C • Low VOC Self-priming, multipurpose, surface tolerant, intermediate coat or topcoat in heavy duty systems, and for ballast tanks, underwater hulls and new steel. ** 17050 / grey semi-gloss 77 220 g/l approx. 4 hours 3.9 m2/l 200 µm 125 - 200 µm PRODUCT FEATURES RECOMMENDED USE SHADE FINISH DRY TO TOUCH THEORETICAL SPREADING RATE Intumescents VOLUME SOLIDS % VOC 20°C HEMPACORE ONE 43600 • Solvent-borne • Passive fire protection • Complies with EN13381-8, BS476-21, ETA 12/0581 according to ETAG018 Part 2 and Certifire certificate n° CF 5146 Intumescent fire protection for internal and external structural steel. Suitable for open beams, columns and hollow sections. Repair and touch-up system. 10000 / white flat 75 ±3 346 g/l HEMPACORE ONE FD 43601 • Fast-drying • Solvent-borne • Passive fire protection • Complies with EN13381-8, BS476-21, ETA 12/0581 according to ETAG018 Part 2 and Certifire certificate n° CF 5146 Intumescent fire protection for internal and external structural steel. Suitable for open beams, columns and hollow sections. Repair and touch-up system. 10000 / white flat 75 ±3 344 g/l * the values variance is ± 1% ALKYDS/ACRYLICS ACRYLICS/EPOXIES EPOXIES EPOXIES/intumescents DFT RANGE 35 minutes 1 m2/l 750 µm depends on the required fire resistance 20 minutes 1 m2/l 750 µm depends on the required fire resistance ** Directly applicable on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping. ZINC-SI/POLYURETHANEs Thinners Ral / hempel colours 8 PRODUCT FEATURES RECOMMENDED USE SHADE FINISH Zinc Silicates HEMPEL’S GALVOSIL 15700 HEMPEL’S SHOPPRIMER ZS 15890 • Contains zinc • Excellent chemical resistance within the pH range 6-9 • Highly weather and abrasion resistant • Cathodic protection of local mechanical damage • Complies with ASTM A-490 Class “B” standard, SSPC-Paint 20, type 1, level 1 and ISO 12944-5 • Included in the CARGO PROTECTION GUIDE ** Self-curing, heavy-duty, rust-preventing primer, tank lining or complete single system for long-term protection of steel in up to C5 corrosive environments. • Quick drying - fast handling time • Contains zinc • Complies with IMO MSC.215(82) standard Shopprimer for short to medium-term protection of abrasive blast-cleaned steel plates and other structural steel during storage, fabrication, and construction periods. Welding (MIG/MAG) and gascutting suitable. PRODUCT FEATURES RECOMMENDED USE 19840 metal grey matt 19890 reddish grey matt SHADE FINISH Polyurethanes HEMPATHANE HS 55613 • Contains zinc phosphate • Aliphatic-isocyanate cured • Good gloss and colour retention • Application temperature from -10°C • VOC-compliant Topcoat for the protection of structural steel or a one coat direct-to-metal system in corrosive environments. HEMPATHANE HS 55810 • Aliphatic-isocyanate cured • Very good gloss and colour retention • Low VOC • Application temperature from -10°C • Complies with Network Rail Specification NR/L3/CN7item number 7.3.1. Topcoat for the protection of structural steel in up to C4 corrosive environments. 11150 / grey VOLUME SOLIDS %* VOC 20°C 64 434 g/l 28 652 g/l VOLUME SOLIDS %* DRY TO TOUCH approx. 30 minutes THEORETICAL SPREADING RATE DFT RANGE 12.8 m2/l 50 µm 50 - 80 µm 4-5 minutes 18.7 m2/l 15 µm 10 - 25 µm DRY TO TOUCH 20°C THEORETICAL SPREADING RATE 60-75% RH VOC DFT RANGE semi-gloss 57 380 g/l approx. 5 hours 5.7 m2/l 100 µm 75 - 125 µm high-gloss 64 359 g/l approx. 5 hours 16.3 m2/l 40 µm 40 - 50 µm 45180 / blue * the values variance is ± 1% ** Resistant to permanent (non-cyclic) dry temperatures or occasionally dry peak temperatures of up to 500°C. Resistant to cyclic dry temperatures up to 400°C. ALKYDS/ACRYLICS ACRYLICS/EPOXIES EPOXIES EPOXIES/intumescents ZINC-SI/POLYURETHANEs Thinners Ral / hempel colours 9 RECOMMENDED USE VOC THINNERS HEMPEL’S THINNER 08080 HEMPAQUICK, HEMPATEX qualities HEMPATHANE topcoats and enamels HEMPEL’S ANTIFOULINGS - GLOBIC, DYNAMIC, OCEANIC and OLYMPIC systems 870 g/l HEMPEL’S THINNER 08230 HEMPALIN qualities and other alkyd-based products (except HEMPAQUICK qualities) 801 g/l HEMPEL’S THINNER 08450 HEMPADUR qualities 857 g/l HEMPEL’S THINNER 08570 HEMPEL’S SHOPPRIMER E 15280 HEMPEL’S SHOPPRIMER ZS 15890 HEMPEL’S SHOPPRIMER ZS 15820 833 g/l HEMPEL’S THINNER 08700 HEMPEL’S GALVOSIL qualities HEMPADUR qualities as “non-popping” sealers 894 g/l HEMPEL’S THINNER 08880 HEMPATHANE topcoats and enamels 881 g/l YOUR NOTES Note: The data, specifications and recommendations provided in this overview of Hempel’s frequently used protective paints are obtained from individual product data sheets. This is a summary only, not complete information and is subject to change. Therefore, it is exclusively the responsibility of the user to obtain accurate, complete and appropriate information in relation to any particular intended use of these and other Hempel products. Unless expressly agreed otherwise in writing, the products are supplied and all technical assistance is provided subject to Hempel’s general terms and conditions of sale, delivery and service. Except as expressed in said general terms and conditions, the manufacturer and seller waive all claims involving any liability, including but not limited to negligence, for all results, injury, or direct or indirect losses or damages arising from the use of the products as recommended above or otherwise. Product data are subject to change without notice and in any case should no longer be regarded as authoritative three years from the date of this information’s issue. For up-to-date Product Data Sheets please visit our website: www.hempel.co.uk. ALKYDS/ACRYLICS ACRYLICS/EPOXIES EPOXIES EPOXIES/intumescents ZINC-SI/POLYURETHANEs Thinners Ral / hempel colours 10 Ral / hempel colours RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL 1000 1001 1002 1003 1004 1005 1006 1007 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1023 1024 1026 1027 1028 1032 1033 1034 1035 1037 2000 2001 2002 2003 2004 22500 24900 20470 27030 27040 27050 20820 27070 27110 23120 17130 20420 27150 27160 27170 27180 27190 27200 20250 27230 27240 27260 27270 27280 27320 27330 27340 19350 27370 22120 50060 57020 57030 50190 RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL 2005 2007 2008 2009 2010 2011 2012 2013 3000 3001 3002 3003 3004 3005 3007 3009 3011 3012 3013 3014 3015 3016 3017 3018 3020 3022 3024 3026 3027 3031 4001 4002 4003 4004 50180 57070 57080 57090 57100 57110 57120 59130 50170 57150 50740 51710 50100 51800 57370 53090 57310 57320 57330 57340 57350 57460 57470 57480 57200 57520 57540 50090 57570 57410 37010 57620 57630 57640 RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL 4005 4006 4007 4008 4009 4010 4012 5000 5001 5002 5003 5004 5005 5007 5008 5009 5010 5011 5012 5013 5014 5015 5017 5018 5019 5020 5021 5022 5023 5024 6000 6001 6002 6003 37050 57660 57670 57680 57690 57700 38120 37000 37020 30170 37030 37040 37150 30570 32080 32090 30180 37110 35120 33930 37140 37240 37170 45180 30350 45200 40210 37220 37230 37440 46000 40050 47020 47030 RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6024 6025 6026 6027 6028 6029 6032 6033 6034 7000 7001 7002 7003 7004 7005 41490 47050 47060 47070 47080 47090 40220 40840 47120 41130 47140 47150 47160 42600 42170 49500 47200 47210 47220 47240 47250 47260 47270 47280 47290 47320 47330 47340 10390 10400 17020 17030 17160 17040 RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL 7006 7008 7009 7010 7011 7012 7013 7015 7016 7021 7022 7023 7024 7026 7030 7031 7032 7033 7034 17060 17080 17100 17110 17120 10270 17530 10380 10520 17210 17220 13230 17240 17260 17300 17310 11320 17330 17340 RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL 8002 8003 8004 8007 8008 8011 8012 8014 8015 8016 8017 8019 8022 8023 8024 8025 8028 67020 67030 61810 67070 67080 67110 67120 67140 67150 60160 67170 60180 67220 67230 67240 67250 67280 RAL RAL RAL RAL RAL RAL RAL RAL RAL RAL 7036 7037 7038 7039 7040 7042 7043 7044 7045 7046 11730 11370 17380 17390 17700 17720 17730 17740 17750 17860 RAL RAL RAL RAL 9004 9005 9006 9007 17940 19990 19000 19870 RAL 9011 17910 RAL RAL RAL RAL 9017 9018 9022 9023 17970 17980 19360 19230 RAL 7048 17480 RAL 8000 67000 RAL 8001 67010 Note: Colours shown in the list are approximate only due to, among other things, printing technology. We do not accept any responsibility for variation. ALKYDS/ACRYLICS ACRYLICS/EPOXIES EPOXIES EPOXIES/intumescents ZINC-SI/POLYURETHANEs Thinners Ral / hempel colours 11 UK 1/2014 UK HEMPEL (UK) LTD. Berwyn House The Pavilions Llantarnam Park Cwmbran South Wales NP44 3FD United Kingdom Tel.: +44 (01633) 874024 Fax: +44 (01633) 489089 E-mail: [email protected] www.hempel.co.uk
