cheaper faster better: complete solution for your ammo

Transcription

MSM GROUP
CHEAPER FASTER BETTER: COMPLETE SOLUTION FOR YOUR AMMO LIFECYCLE
AMMO: SALES | DEVELOPMENT | PRODUCTION | REVISION | MODERNIZATION | ECOLOGICAL LIQUIDATION
DEFENCE TECHNICS: DESIGN AND DEVELOPMENT | PRODUCTION | SERVICE | MODERNIZATION | SALES
ABOUT US
MSM GROUP
MSM GROUP Ltd. was established in 2015 by transformation of MSM Martin Ltd., which
dealt with construction, development, production and sales mainly with military material.
MSM Martin Ltd. was founded in 2004 on the base of MSM Ltd. In next years the MSM
Martin Ltd. took over several military companies located in the middle of Slovakia, and built
on its traditional manufacturing activities in military and civil production.
Due to ZVS company inclusion into the group structure we can state that the origin of
MSM GROUP Ltd. comes back to 1927 when then Škoda Works in Plzeň, as a monopoly
producer of ammunition technics decided to build so called „spare factory“ in Slovakia. The
company was totally destroyed during the World War II, and it took several years while the
production was restored to such extend, that its products were supplied not only for the
Ministry of National Defense, but for many countries worldwide as well.
Today the MSM GROUP Ltd. makes use of rich experiences from the past and know-how
of highly qualified workers and vast archive of technical documentation for all necessary
procedures.
In 2009 the biggest Czech military holding EXCALIBUR ARMY entered MSM as a co-owner.
Why to cooperate with us:
The resources and the competence to cover whole ammo life cycle:
1. Development of the product and the production process included complete documentation
2. Engineering construction of product including the prototype production and the preserial testing
3. Production line, tools and jigs engineering construction, and production
4. Production of various types of small, middle and large caliber ammunition and associated
charges, fuses and primers for guns and cannons. Deliveries with all of necessary
documentation, and certificates
5. Services during the ammo life cycle: Testing, Revision, Modernization, Life cycle
prolongation, Disassembly, Ecological disposal
6. In the case also the production line development, production and the transfer with whole
necessary technical support to customer plant
7. Services for military vehicles including the diagnostics (Tanks, Armoured vehicles, Selfpropelled gun systems, ...)
Design, development, manufacturing and servicing of the radio navigation systems (NDB) for
air traffic control. Repairing and modernization of various kinds of Armed Forces equipment
in the segment of air defence equipment.
More than 70 years experiences in the ammunition development, production and complete
services in this field.
Long tradition in the MSM locations for the ammunition production processes with significant
effects as the deep skilled personal, support industries, development fields, education etc.
2
MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk
More information at www.msm.sk
SCOPE OF FIELD
Ammo Production and Industry:
ZVS Dubnica nad Váhom: Production of various types of small, middle and large caliber
ammunition and associated charges, fuzes and primers for guns and cannons. Also transfer
of technology for production, testing and assembly of the ammunition including variety of
components.
Industry production of welded construction, metal and metal sheet processing and also the
transformators production.
DUBNICANNADNVÁHOM
SNINA
Bratislava
Ammo Services:
MSM Nováky: Aimed at the ammunition area
production covered whole ammo life cycle including the
life cycle prolongation and the testing.
Technological possibilities with munitions
1. Delaboration and disposal
2. Repair and revision (extension of life cycle)
3. Live, training and drill ammunition manufacturing
NOVÁKY
Bratislava
Military vehicle service:
MSM Trenčín: Welding, assembly and finalization of
vehicles cabine, mainly the TATRA trucks.
Complete service for military vehicles includes the
diagnostics (Tanks, Armoured vehicles, Self-propelled
gun systems, ...)
TRENČÍN
Bratislava
Electronic Industry:
BANSKÁbBYSTRICA
MSM Banská Bystrica: Design, manufacturing and
servicing of the radio navigation systems (NDB) for air
traffic control (civil and military) as well as repairing
Bratislava
and modernization of various kinds of Armed Forces
equipment, especially in the segment of air defence
equipment.
Another important product of the portfolio is own development and production of
Ground Power Unit (GPU) for the aircraft starting.
3
AMMO PRODUCTION – 7,62 CALIBER
Live ammunition 7.62-43
Sharp charge of with normal bulet. The charge consists of cartridge cases, primers,
powder charge and bullet. The weight is 16.5 grams ammunition, bullet weight
8.05 g, maximum range of 2,800 meters. Special ammunition 7.62-43 Sv Luminous, the illuminating missile contains Il. composition. The charge is indicated
by a green tip on bullets. 7.62-43 PZ
Penetrating incendiary charge. It is marked with a black tip and a red stripe on bulet.
7.62-43 Z
Incendiary charge. It is marked with a red tip on bulet.
Training Ammunition 7.62-43 Cv
Used for training and imitation shooting. It consists of cartridge cases, primers and
smokles powder. The Charge does not have missiles.(bulet). 7.62-43 Red Reduced charge for shooting at shorter distances. The maximum range 1100 meters.
Charge has pistol bulet and quantity smokles powder is reduced. It is marked with
a white tip. 7.62-43 RedSv
Reduced and luminous. It is marked with a green tip and a white stripe. 7.62-43 Šk
School charge for training. Rehearses the charge, discharge activity with container,
slide and trigger. It is only an imitation sharp ammunition. Does not contain
any smokeless powder or incendiary compound. It is marked with longitudinal
overpresses on the body of the cartridge.
7.62 x 39 blank
Cartridge 7.62 x 39 BLANK has wide aplication for training purposes and for acoustical
effects.
Technical data:
Caliber
7.62 x 39 mm
Cartridge length
48.2 mm
Cartridge weight
max. 10.4 g
Cartridge case
Brass CuZn30
Primer type
Berdan
Propellant type
Single base powder
Packages
Retail paper box = 130 pcs
Technical data:
Cartridge 7.62 x 39
Cartridge 7.62 x 39
AP-T
SA-58, AK-47, etc.
Cartridge 7.62 x 39
AP
SA-58, AK-47, etc.
Cartridge 7.62 x 39
Practice
SA-58, AK-47, etc.
Cartridge 7.62 x 54R
4
SA-58, AK-47, etc.
Machine gun RPK, PKT, AKM UK-59
AMMO PRODUCTION – 9 mm LUGER
Full metal jacket bullet
with lead core
9.0 g
8.0 g
7.5 g
Brass case with powder
charge and primer
The 9 x 19 mm LUGER has become the most popular caliber for law enforcement agencies
and modern sports shooting, because of wide range of self-loading compact pistols and
sub-machine guns with large magazine capacity of such ammunition.
9 mm Luger
Important factor, that contributing to the increasing popularity of such caliber, is low price
compared to other calibers and availability.
Technical data:
Bullet
7,5 g / 115 grs
8,0 g / 124 grs
9,0 g / 139 grs
FMJ RN
FMJ RN
FMJ RN
29.69
29.69
29.69
Velocity (m.s-1) - v0
370
360
320
Kinetic energy (J) - E0
513
518
461
Velocity (m.s-1) - v5
365
355
312
Kinetic energy (J) - E5
500
504
438
Test barrel length (mm)
285
285
285
Cartridges per box (pcs)
50
50
50
Boxes per carton (pcs)
20
20
20
Bullet type
Length (mm)
Carton weight (kg)
12.7
13.2
14.2
The 9 mm Luger cartridge combines a flat projectile trajectory with moderate recoil.
Together with sufficient wounding effect it makes an ideal cartridge for sports shooting
or self-defense.
9 mm Luger – case
The caliber 9 x 19 mm CuZn30 case is intended for inserting the
powder charge, primer and bullet.
9 mm Luger – bullet
The full metal jacket bullets with lead core are produced in weight 7,5 g / 8,0 g / 9,0 g. The
jacket is made from CuZn30 and the bullet core is made from Pb 99,5.
9 mm Luger – bullet
Weight (g)
7.5
8.0
Height (mm)
Diameter (mm)
Material
9.0
15.0
15.4
-0.4
16.6-0.4
9.02-0.02
9.02-0.02
9.02-0.02
-0.4
Lead core Pb 99,5 / Bullet jacket CuZn30
5
AMMO PRODUCTION – HAND GRENADES, PYROTECHNIC COMPOSITIONS
Production of Training
Grenades URG-86
URG-86
URG-86 is universal hand-grenade, designated for
antipersonell pruposes. Grenade is consists of basic parts:
Plastic body of Grenade, combined fuze (which enables the
explosion following the impact or after time period of 3.2
– 4.6 seconds after the activation of the fuze), PL-U-EP 14
filling and shards. The function of URG 86 is secured even
in case of adverse climatic conditions in the range between
-50°C to +50°C.
Technical data:
6
Weight
440 g
Lenght
117 mm
Diameter
60 mm
Filling
PL-U-EP 14
Filling weight
43 g
Reduced Universal Hand Grenade (URG-86-Rd) is
destined for the grenade usage training at the army. By
its design the reduced grenade responds to a live grenade
specified for the military application. In term of the output
the effect of the reduced grenade is considerably lowered.
Only the booster (primer) output is used at the grenade
explosion
Universal Hand Grenade Training (URG-86-Šk) is
intended to theoretical military units education. It is the
maquette. „Šk“ means „Školný“ (School). The body and
the fuse of the maquette are black instead of green, and
there is on the fuse the red cross marking.
1. Primers
Primers are used to ignite the spotting and powder charges.
They are initiated by firing pin percussions onto bottom
of the primer. They consist of brass anvil into which cup
with percussion priming composition is moulded. Crimped
priming composition in the cup is covered with tinfoiled
disc.
2. Igniters
Igniters serve for igniting the detonators or delay elements
in artillery ammunition fuzes. They are initiated by sharp
needle injecting. They consist of copper cup, into which the
stabbing priming composition of cooper cover is molded.
3. Detonators
Detonators serve for initiating the explosives. They consist
of aluminium cup and cover, primary and base charge.
Primary charge consists of two primary explosives and
secondary charge consists of high explosive. Ignition hole
on the cover is closed by silk cloth disc
AMMO PRODUCTION – 30 MM CALIBER
30 mm Ammunition
30 mm HE-T
Production program of 30 mm ammunition features following types of rounds:
(High-Explosive round with Tracer)
30 mm AP-T
is designed for firing from 2A42, 2A38 and 2A72 guns. It is used for defeating
ground and air targets by bursting effect of the projectile at the range up to
3,000 meters. The impact fuze has also a self-destruction function.
(Armour Piercing round with Tracer)
Legend:
is designed for firing from 2A42, 2A38 and 2A72 guns for engaging lightarmored ground and air targets.
1. Shell body, 2. Steel cartridge case, 3. Impact fuze, 4. Bursting charge
5. Propelling charge, 6. Priming screw, 7. Tracer, 8. Driving band
Legend:
1. Shell body, 2. Steel cartridge case, 3. Ballistic cap
4. Tracer, 5. Propelling charge, 6. Priming screw
7. Decopperizer, 8. Driving band
30 mm HE-T PRACTICE
(High-Explosive Practice round with Tracer)
30 mm HE-I
is designed for practice firing from 2A42, 2A38 and 2A72 guns against
ground and air targets. The projectile is equipped with two fuzes. Both
fuzes have self-destruction function only. The self-destruction occurs within
an interval of 5,5–9,5 seconds after fire. Splinters of the projectile do not
exceed range of 5,000 meters.
(High-Explosive Incendiary round)
is designed for firing from 2A42, 2A38 and 2A72 guns. It is used for
defeating ground and air targets by incendiary effect induced by the shell
splinters after a target has been engaged and its explosive charge activated.
The impact fuze has also a self-destruction function, which is activated in
case of missing the target.
Legend:
1. Shell body, 2. Steel cartridge case, 3. Front self-destructive fuze
4. Bursting charge, 5. Bottom self-destructive fuze , 6. Propelling charge
7. Priming screw , 8. Tracer, 9. Driving band
Legend:
1. Shell body, 2. Steel cartridge case, 3. Impact fuze
4. Incendiary charge, 5. Propelling charge,
6. Priming screw, 7. Driving band
Packing:
Technical data:
AP-T
Caliber (mm)
Weight of round (kg)
HE-I
HE-T
HE-T PRACTICE
30
30
30
30
0.858
0.835
0.835
0.835
Lenght of round (mm)
288.5–291.8
288.5–291.8
288.5–291.8
288.5–291.8
Muzzle velocity (m.s-1)
970
960
960
960
Min. burning time of tracer (s)
Self-destruction time (s)
3.5
–
9.0
4.5
–
9.0–14.0
9.0–14.0
5.5–9.5
Type of priming screw
Fuze
percussion
–
Impact, selfdestructive
Impact, selfdestructive
2x self-destructive only
Number of rounds in metal sheet case
pcs
18
Dimensions of metal sheet case
mm
325 x 230 x 127
Weight of full metal sheet case
kg
17
Number of metal sheet cases in wooden box
pcs
3
Dimensions of wooden box
mm
875 x 398 x 206
Weight of empty wooden box
kg
8.7
Weight of full wooden box
kg
60
Number of wooden boxes on pallet
pcs
15
Dimension of pallet
mm
1.200 x 800 x 1.100
Weight of full pallet
kg
930
Packing code
u
n
4C1/Y65/year of production SK/1003M/
TSU104000095/10R
Hazard Class
ADR
1.2 F
7
AMMO PRODUCTION – 122 MM ROCKET „GRAD“ FOR RM-70 / BM-21
122 mm Rocket „GRAD“ for RM-70 / BM-21
Technological line for inspection of artillery rockets 122 mm JROF RM70 is designed for
repair, modernization and inspection in order to extend the life.
At the inspection procedures is performed:
– modernization, which is caused by the requirement to increase the safety of rockets and
resistance against unintentional initiation of induction or action of static electric charges
– replacement of damaged parts, which affect its function, internal and external ballistics
– check of alignment of centering ring and the warhead, high of locating pin, position of
locating pins to the longitudinal axis, position of the contact cap, geometry of the open
stabilizer, circuit and resistance of rockets, air tightness of the tin for fuses
– complete repair of packages
Technical data:
Caliber
122 mm
Lenght of missile with fuze
2867.31–2882.60 mm
Weight of missile with fuze
66.6–66.75 kg
Max. range
20.4 km
Min. range
3 km
Type of the warhead
High Explosive (HE) Warhead
Fuse MRV-U
Impact fuse (with immediate, short and long delay)
Rocket motor
Double-based solid propellant
Weight of the rocket motor
48.2 kg
Weight of the propellant
20.5 kg
Color
silver
Limits of temperature
8
Storage
-40°C / +60°C
Fire
-32°C / +50°C
Packing
One rocket and one fuze in each box
AMMO PRODUCTION – 122 MM ROCKET „GRAD“ FOR RM-70 / BM-21 – MODERNIZATION
Engine Modernization
Fuse Modernization
Basic version range:
Max:
20.4 km
Min:
3 km
Basic version fuse: Impact fuse (with immediate, short and long delay)
Possibility for fuse modernization:
Possibility for engine modernization:
36 km (over sea)
Max. range
40 km (in 600 m altitude)
16 km (over sea)
Min. range
21 km (in 600 m altitude)
Product name:
Forad-1
Operation regime:
Proximity & Impact as the option
Initiation process:
Mechanical (Impact, Delayed) / Electrical)
Height of explosion:
Regular settings in 2 levels:
h=1÷30 m
Protection:
Warhead Modernization
Basic warhead: High Explosive (HE)
Possibilities for warhead modernization:
h=1÷15 m
Fuzes are protected against specific electric defense
equipment
Fuzes will not be activated by clouds, fog, storm or
sandstorm.
Operational temperatures:
-40°C ÷ +50°C
Lifespan:
Min. 10 years – if stored in original package and all
storage conditions are met.
Number of fragments (shrapnels): 1050 pcs
HEAP
Armour penetration:
Radius = 15 m
Thickness
Radius = 32 m
Thickness
Warranty for technology and equipment: 2 years
10 mm
6 mm
Warranty for rockets:
Lifespan is prolonged by 5 years (from 10 years to 15 years)
In the case of modernization the lifespan is prolonged by 10 years
Number of fragments (balls): 9100 pcs
HEF
Fragments density (pcs/m2) at lethal radius:
R =
7 m
118.1
R = 15 m
34.6
R = 20 m
21.5
R = 40 m
4.6
Revision costs are aprox. 1/3 of total costs of provision of new rockets
122 mm HEF
122 mm HEAP
9
AMMO PRODUCTION – 122 MM ROCKET „GRAD – MODULAR“
MODULAR
Improved system of Launcher designed for multiple use of 122 mm JROF.
MODULAR container loaded with 122 mm missiles can be transported on carriage body of vehicle, or snuged on RM 70/85 MODULAR rocket launcher and is suited for air
and naval transport.
It is possible to launch 122 mm JROF and 122 JROF-M missiles directly from container. Contains 28 pcs of missiles. – Loads and unloads using built-in crane
– Automatic identification of type of rocket
– Operation from inside the crew cabin
– Autonomous mission capabilities
– Air – transportability
10
AMMO PRODUCTION – 122 MM FOR RM-70 / BM21 – MODERNIZATION
MSM GROUP offers delivery of the complete know-how included the technology for production and revision, not merely for
122 mm GRAD but for thorough ammo portfolio, too. Our teams of specialists develop the technology based to the customer
requirements. We offer the technology in a stationary or in a mobile mode. We offer transfer of the production line (revision,
disassembly or ecological disposal) to the customer place including the training for line operators.
MSM GROUP has been awarded in 2013 the Prestigious Prize at International Exhibition of Defence and Security Technologies
IDET for Mobile technological line for destruction of ammunition.
Mobile line model for the ammunition disassembly
Reference and
experience related to
122 JROF delaboration,
revision, modernization
and the technology
and equipment
sales including the
implementation
Germany
Turkey
Syria
Egypt
Vietnam
Ministry of defence
of Slovak republic
Segment of the stationary line for 122 JROF GRAD production
11
125 mm Ammunition
is designed for firing from 2A46 cannon of T-72 or other tanks, which have the D-81 type of 125 mm
cannons. The production program of 125 mm ammunition features following types of rounds:
– HE
– HE-T
– HE-T PRACTICE
– HEAT-T
– APFSDS-T
– ECv
125 mm HE
(High-Explosive round)
125 mm HE-T PRACTICE
(Practice High-Explosive round with Tracer)
is divided round with stabilizer and tracer. Shell is charged
with screw filled TNT and is equipped with front self
destructive fuze (AZ-90), bottom self-destructive fuze
(DZ 75 AU) and two tracers. The self-destruction occurs
within an interval of 3.8-5 seconds, while splinters won‘t
exceed the range of 5,000 meters. The cartridge is semicombustible and consists of sealing steel cartridge case,
combustible case and powder charge. It is initiated by
priming screw with mechanical or electrical ignition.The
round is intended for practice firing from tanks equipped
with 125 mm cannon.
Legend:
is divided round with stabilizer. Shell is charged with screw filled TNT and
is initiated by impact fuze, which can be set on superquick or delayed
action. The cartridge is semi-combustible and consists of sealing steel
cartridge case, combustible case and powder charge. It is initiated by
priming screw with mechanical or electrical ignition. The round is intended
for muting living forces, destroying shelters, barricades, buildings and
other heavy targets.
1. Shell body, 2. Stabilizer, 3. Bottom self destructive fuze,
4. Explosive charge, 5. Front fuze, 6. Tracer,
7. Propelling charge, 8. Combustible case, 9. Sealing case
Technical data:
Type of round
HE, HE-T, HE-T PRACTICE
Caliber (mm)
125
125 mm HE-T
Weight of entire round (kg)
23
Cartridge length (mm)
408
(High-Explosive with Tracer and self destruction)
Length of the sealing cartridge case (mm)
140
Cartridge weight (kg)
9.5
125 mm HE-T is high explosive round with tracer. Shell with
stabilizer is charged with screw filled TNT or TNT/RDX charge, it is
equipped by head point detonated fuze, bottom self-destructive
fuze and by 2 tracers. The self-destruction time ranges between
3,8 to 5 seconds at the condition that after detonation of the
self-destructive fuze splinters of the shell cannot overfly 5000 m.
The round is designed for firing on target from tank type T-72 and
other tanks equipped with 125mm barrel type D-81.
Legend:
1. Shell body, 2. Stabilizer, 3. Bottom self destructive fuze,
4. Explosive charge, 5. Front fuze, 6. Tracer, 7. Propelling charge, 8.
Combustible case, 9. Sealing case
Weight of the powder charge (kg)
Effective firing range (m)
2000
V0 = 850
Packaging
Number of rounds per wooden box
Dimensions of wooden box (mm)
Weight of the box with round (kg)
Dimension of pallet (mm)
Number of boxes on the pallet
Weight of loaded pallet (kg)
12
6
1
832 x 535 x 270
cca 62
1075 x 832 x 1143
8
523
125 mm (APFSDS-T) TAPNA
125 mm HEAT-T
(High Explosive Anti – Tank with Tracer)
Armor Piercing Fin Stabilized Discarding Sabots Tracer round) is divided sub-caliber armor piercing
round intended for destroying armored targets, such as tanks or other armored vehicles. Armour
piercing is max. 550 mm of RHA at the distance of 2,000 m. The armor piercing penetrator is made
from tungsten alloy, equipped with fin stabilizer with tracer. The projectile is embedded in combustible
case with powder charge. The cartridge is semi-combustible and consists of sealing steel cartridge
case, combustible case and powder charge. It is initiated by priming screw with mechanical or
electrical ignition.
125 mm HEAT-T has been designed for direct firing against tanks, selfpropelling weapons, mortars and heavy armored targets. It may be also
used against concrete bunkers. Round is aerodynamically stabilised
with six fin, which are folded and opened during the flight. Semicombustible cartridge Z 40 or Z 52 is initiated by the priming screw
with an optional mechanical or electronic function. Round is designed
for firing from T-72 tank or other barrels type D-81.
Legend:
1. Fuze
2. Body
3. Hollow charge insertion
4.Explosive charge
5. Fins with tracer
Technical data:
Type of round
HEAT-T
Caliber (mm)
125
Length (mm)
678
Weight of entire round (kg)
19
Tracer's burning time (s)
125 mm
APFSDS-T projectile
125 mm APFSDS-T
projectile in combustible case
125 mm semi
combustible
cartridge
min 3
Technical data:
Semi-combusted cartridge
408
Weight of the complete round
20 kg
138
10,3 kg
9.5
Weight of the projectile including
the increment propelling charge
Weight of the projectile
7,15 kg
Muzzle velocity
1690 m/s
Temperature range
-40°C to +50°C
Accuracy
0,5 m x 0,5 m at 2000 m
Penetration
550 m of RHA at 2000 m
Packaging
1 piece of the round in the hermetic sheet
metal canister, 20 pieces of the rounds in
one pallet. This packing is applying for long
term storing (10 years)
Weight of the powder charge (kg)
Effective firing range (m)
5
2000
V0 = 900
Packaging
Number of rounds per wooden box
Dimensions of wooden box (mm)
Weight of the box with round (kg)
1
832 x 430 x 270
cca 55
Legend:
1. Tip
2. Penetrator
3. Sabot
4. Driving band
5. Sealing ring
6. Powder charge
7. Combustible case
8. Fin stabilizer
9. Tracer
10. Flame damper
11. Base powder
12. Combustible case
13. Seali-ng case
14. Ignater
15. Priming screw
13
125 mm ECv
125 mm IMITATION TRAINING ROUND
125 mm CV is a practice/imitation ammunition designed for tank cannon D-81, which perfectly
imitates loading and firing of combat ammunition. Energy created during shooting is sufficient for
automatic function of the weapon in extreme temperatures. In regards of the minimal danger zone
(100 m) costs for training are only fraction of costs necessary for firing with combat warhead.
Front fuze AZ 9OU
AZ 90U Fuze
DZ 75 AU Fuze
Bottom fuze DZ 75 AU
Basic technical characteristics of 125 mm rounds
Technical data:
HE
HE-T PRACTICE
Caliber (mm)
125
125
125
Weight of projectile /with fuze (kg)
23
23
7.08
Legend:
1. 125 Imitation projectile
2. Upper casing
3. Inner casing
4. Decopper
5. Upper igniter
6. Combustible mantel
7. Powder charge
8. Bottom igniter
9. Priming screw
Velocity (m.s-1)
APFSDS-T
850
850
1.68
Max. gas pressure (MPa)
387,4
387.4
500
Explosive charge /TNT (kg)
3,15
3.05
-
Impact
2 self-destructive fuzes AZ 90U, DZ 75 AU
-
Fuze
Packing 125 mm HE, HE-T practice, HE-T
Technical data:
Type of round
Imitation, Training
Caliber (mm)
125
Weight of dummy round (kg)
10.9
Middle gas pressure at normal temperature (Mpa)
98.7
Endangered zobe by flying cartridge and round residue
Number of projectiles in wooden box
pcs
1
Dimensions of wooden box
mm
832 x 536 x 270
Weight of the box with round
kg
62.5
Number of wooden boxes on pallet
pcs
8
to 100 m from muzzle
Dimension of pallet
mm
1,075 x 832 x 1,143
Cartridge
Ž40, Ž52
kg
523
Priming screw
GUV-7
Packing code
u
n
4C1/Y65/S/Year of production SK/1003M/
ID number of certif. authority
Hazard Class
ADR
1.2 E
Semi-combustible cartridge
14
Packing:
408
138
9.5
The APFSDS-T rounds are packed in hermetic metal cases, 1 complete round in wooden box on metal
pallet. One pallet contains 20 pieces of complete rounds.
152 mm Ammunition
Due to the experience with 155mm ammunition, where the
discharge gas generator (Base Bleed) was used for range
extension, also the 152mm ammunition production program
has been extended by 152mm projectiles with Base Bleed. The
classic version of HE projectile with hollow base (HE ER-HB) is
also available.
152 mm HE ER-HB
(High-Explosive Extended Range
projectile with Hollow Base)
152 mm HE ER-BB
(High-Explosive Extended Range
projectile with Base Bleed)
Long range projectile HE ER BB is primarily designed for howitzer
weapon system 152 mm DANA mod. 77 and modernized
DANA-M1 CZ without modification of automatic loading system.
The round is divided and consists of 152 mm projectile HE ERBB and P740 cartridge. It is intended for destroying of enemy
infantry units, firing posts, trenches, roadblocks, light armored
vehicles, buildings, observation points etc. in range up to 25,500
meters.
Optional Fuzes
for 152 mm Projectile
with BB
Suggested options :
1. standard KZ-88 fuze
2. upgraded KZ-88 fuze with increased safety
and reliability function
3.replacement of KZ-88 fuze with different
fuze, which meets NATO standards.
Fuze KZ 88-M
Modified Cartridge P740
Modified cartridge P740 consists of original
steel case filled with triple base smokeless
powder M30 (nitrocellulose, nitroglycerine,
nitroguanidine),
which
enables
higher
performance with reduced barrel abrasion.
The exact combination of tubular and granular
powder enable to increase muzzle velocity with
relatively small increase of maximum pressure
in cartridge chamber. The charge is initiated by
standard priming screw.
Technical data:
Technical data:
Legend:
Projectile weight with fuze (kg)
43.56
Projectile weight with fuze (kg)
43.56
Projectile length without fuze (mm)
778
778
Projectile length with fuze (mm)
838
Projectile length with fuze (mm)
838
695
760
230
280
Temperature range (°C)
(-40)–(+50)
Bonding between shell body and BB
Threaded, demountable
Temperature range (°C)
(-40) – (+50)
1. Cartridge case
2. Tubular charge
3,4,5. Covers
6. Flange
7. Priming screw
8. Granular charge
15
155 mm Ammunition
155 mm HE ER FB-BB
The production programme of 155mm ammunition features following projectile types:
– HE (HE ER-HB, HE ER-BB, HE ER FB- BT, HE ER FB-BB)
– short range practice (HE PRACTICE)
– M107 HE
High Explosive Extended Range Full Bore projectile with Base Bleed) is a long range
projectile of modern design where the front centering collar is replaced by four
projections, called „nubs“. The projectile has the Base Bleed screwed on its bottom,
which ensures range up to 39,000 meters when fired from 45 caliber gun and up to
42,000 meters when fired from 52 caliber gun.
155 mm HE ER-HB
High Explosive Extended Range projectile with Hollow Base) is filled with TNT
or TNT/RDX (Composition B) explosive in ratio approx. 50/50. The projectile has
hollow base screwed on the projectile (shell body) bottom.
Legend:
1. Shell body, 2. Explosive charge
3. Fuze, 4. Driving band
5. Hollow Base
155 mm HE ER-BB
High Explosive Extended Range projectile with Base Bleed) has the same shell body
with explosive charge and the same fuze as HE ER-HB projectile. But unlike the HE
ER-HB projectile, the HE ER-BB projectile uses the discharge gas generator (Base
Bleed), which ensures extended range up to 37,000 meters, when fired from 45
caliber gun and up to 40,000 meters when fired from 52 caliber gun.
Legend:
3. Fuze, 4. Driving band
5. BB body, 6. BB igniter
7. BB grain
Technical data:
HE ER-HB
HE ER-BB HE ER FB-BT HE ER FB-BB HE PRACTICE
Caliber (mm)
155
155
155
155
155
Projectile weight (kg)
44
47
44
47
46,1
831
841
831
841
707
Explosive cherge (kg)
9,9
9,9
8,1
9,9
1,2
TNT or TNT/
RDX
TNT or
TNT/RDX
TNT or TNT/ TNT or TNT/
RDX
RDX
TNT
KZ984
Point detonating
Fuze
Packing:
Legend:
3. Fuze, 4. Driving band, 5. BB body
6. BB igniter, 7. BB grain
16
Number of projectiles on pallet
pcs
8
Dimensions of pallet
mm
360 x 765 x 964
Weight of pallet unit
kg
395
Packing code
u
n
4C1/Y65/S/year of production
SK/1003M/ID number of certif. Authority
Hazard class
ADR
1.1 D
155 mm BI-MODULAR CHARGE SYSTEM
KZ 984 Fuze
The bi-modular charge system is used for all previously mentioned 155 mm projectiles.
It consists of following two types of charges:
is intended for the projectile 155 mm HE ER-HB (High
Explosive Extended Range projectile with Hollow Base).
The fuze is pyrotechnical, with detonator safety and two
independent safety features for arming, to meet NATO
standards. For desired effect on target it can be set on
superquick (fragmentation effect) or delayed action
(bursting effect).
– BC-E charges used for short range (zone 1-2)
– TC-F charges used for long range (zone 3-6)
Bi-modular system covers firing range of 155mm projectiles
from 5 up to 42 kilometers when fired from 52 cal. gun
(with HE ER FB-BB projectile).
Legend:
1. Firing pin, 2. Spring, 3. Sliding case
4. Balls, 5. Striker, 6. Primer, 7. Primer casing
8. Insertion, 9. Pin, 10. Closing nut, 11. Fuze body
12. Safety mechanism, 13. Booster charge, 14. Membrane
15. Sealing ring, 16. Ball, 17. Striker upper body
18. Delay mechanism, 19. Cock, 20. Rings, 21. Fastening case
155 mm Self-propelled Gun Howitzer „Zuzana“ produced in Slovakia
17
AMMO PRODUCTION – MORTAR BOMBS
Mortar bombs are designed for defeating light armoured targets. Machine
gun nests, field fortifications, infantry unit in trenches and units hidden
after natural obstacles especially in mountainous and woody terrains.
MSM GROUP can offer also the mortar ANTOS or ANTOS-LR.
The production program of mortar bombs includes the following
types of rounds:
60 mm Mortar Bombs for
Mortar ANTOS
Technical data:
Mortar Bomb HEI
Weight of mortar bomb
Weight of explosive
18
Mortar Bomb HEF
Mortar Bomb JUMP
Mortar Bomb SMK
Mortar Bomb ILL-IR
High Explosive with
Incendiary Effect
High Explosive with
Frangmentation Effect
Dummy for
the Training
Smoke effect with the
same balictics as the life
bomb
1.420 g
1.420 g
1 290 ± 30 g
1.420 g
1.200 g
270 g
270 g
–
–
–
Illuminating
Infrared
Technical data:
Weight of smoke-producing corpuscle
–
–
–
120 g
–
Calibre
60.7 mm
Weight of primary propelling charge
5.0 g
5.0 g
–
5.0 g
5.0 g
Weapon length
905 mm
Weight of augmenting charge (pair)
2 x 3.5 g
2 x 3.5 g
–
2 x 3.5 g
2 x 3.5 g
Barrel length
650 mm
Weight of amplifier (BP)
0,35 g
0,35 g
–
0,35 g
0,35 g
Barrel length with breech ring
790 mm
Length of the bomb with fuse
294 ± 2 mm
294 ± 2 mm
284 mm
294 ± 2 mm
273 mm
Range of aimed elevation
45°–85°
Range (at 21°C) – elevation 85°
85° 80 m
85° 80 m
–
85° 80 m
85°
Maximum range
1230 m
Minimum range
80 m
Range (at 21°C) – elevation 45°
45° 1200 m
45° 1200 m
–
45° 1200 m
45°
Mortar weight
5.3 kg
AR-MDH/DM 111
AR-MDH/DM 111
–
MZ-35
–
Mortar weight with spare parts
and accessories in storage
package
16.5 kg
20 kg
20 kg
Fuse type
Primer screw
Weight of the wooden box with 10
bombs
Own Design
20 kg
20 kg
20 kg
AMMO PRODUCTION – MORTAR BOMBS
81 and 98 mm HE
Mortar Bomb
120 mm HE Mortar bomb
The 120 mm mortar bombs can be fired either from towed
or self-propelled mortars.
The 81 mm and 98 mm mortar bombs are fired from
towed mortars.
Technical data:
120 mm HE
mortar bomb
Technical characteristic
Caliber (mm)
81 mm HE mortar bomb 
98 mm HE mortar bomb 
Weight (kg)
Technical data:
Technical characteristic
81 mm HE mortar bomb
120
98 mm HE mortar bomb
16
Explosive charge (kg)
2,66
Maximum firing range (m)
8000
Minimum firing range (m)
250
Caliber (mm)
81
98
135
Weight (kg)
5
9.2
352
Explosive charge (kg)
0.72
1.46
Fuze
Maximum firing range (m)
6800
8000
Minimum firing range (m)
240
300
120
130
375
387
MZ-81 MZ-95 M
MZ-81 MZ-95 M
Fuze
81 mm
120 mm HE
substitute mortar
bomb
Packing:
Caliber
Packing:
Caliber
120 mm HE
mortar bomb
MZ-81 MZ-95 M
120 mm
Number of bombs in packing
pcs
2
Dimensions of packing
mm
520 x 265 x 130
Weight of full packing
kg
28
Number of packings on pallet
pcs
6
98 mm
mm
640 x 435 x 595
kg
700
Packing Code
u
n
4H2W/Y12/S/year of production SK/1003/
number of certif. authority
Hazard Class
ADR
1.2 E
Number of bombs in packing
pcs
2
1
Dimensions of packing
mm
888 x 360 x 230
700 x 118 x 116
Weight of full packing
kg
46
36
Number of packings on pallet
pcs
15
8
mm
1.056 x 890 x 1.080
780 x 770 x 550
kg
760
121,6
Packing Code
u
n
4C1/Y65/S/year of production
SK/1003/ID number of certif.
authority
4H2W/Y12/S/year of production
SK/1003/number of certif.
authority
Hazard Class
ADR
1.2 E
1.2 E
MZ-81M
MZ-95M
The mortar bombs can are fired fitted with PD fuzes MZ-95M and MZ-81M respectively.
The fuze type MZ-95M is nose point detonating fuze, designed fo high-explosive mortar ammunition.
The fuze can be set on superquick or delayed action according to required effect on target
(fragmentation/bursting). The fuze is pyrotechnical with detonator safety.
19
AMMO PRODUCTION – TRAINING AMMUNITION AND DUMMIES
Training Ammo, Dummies and Cuts
We can offer in this area:
1. Training cartridges and projectiles for manually loaded guns (calibres 57-152 mm)
2. Training rounds for guns with automatic loading mechanism (122 mm ECv for HD-30 and ShH
2S1, 125 mm Ecv for T72,152 mm ECv for ShKH 77, 73, PG15V, Cv for BVP-1)
3. Accesories for training cartridges (muzzle brake 122 HD-30, ShH 2S1 and 152 ShKH)
4. Fictional water cartridges for recoil brake mechanisms of artillery guns (100, 122, 125,152 mm)
5. Anti-Tank trainning mines Cv Pt-Mi Ba III
6. Universal hand grenade
Advantages of training ammunition:
Real sound and optical effect and real automatic fuctioning of the gun
Safety of area 100m from the muzzle of the barrel
Lower costs of training in comparison with use of live ammunition
MSM GROUP supplies Taylormade‘s training ammo
based on customer requirements
Ammo Dummies
MSM GROUP is the main supplier for ammo dunnis for international EOD centre located in Slovakia.
Reference
MOD of Slovakia, MOD of Czech Republic, MOD of Hungary, MOD of Poland, MOD of Austria, MOD of Vietnam,
MOD of Greece, MOD of Nigeria, MOD of Slovenia, SB Equador, Diehl Germany, MKEK Turkey, ELBIT Land System
Izrael.
20
AMMO PRODUCTION – FLYING TARGET IMITATOR 122 MM
Flying Target Imitator 122 mm (LIC)
Firing Equipment for LIC
Flying target imitator 122 mm FTI is intended to imitate air targets during the military live firing from
anti-aircraft launchers, which have infrared guiding system.
Firing equipment OZ – LIC ensures the firing the 122 mm Flying target imitator – FTI during the
training of anti-aircraft forces.
122 mm rocket FTI consists of drive unit with adjusted wing part. The drive unit consists of a back
chamber of 122 mm rocket JROF GRAD.
It enables circle-firing on the distance from 5 200 to 6 500 m with elevation from 25 °C to 70 °C and
it is operated by commander – loader and gun pointer.
The rocket engine is lighted up by electric detonator. The imitator of air targets is a warhead, which
is screwed on the back chamber of the rocket. The warhead of FTI consists of parts, which ensure
required intensity of radiation on the flying trajectory (they imitate airplanes and helicopters) – imitator
of interference / jam, of mechanical switch and of electric fuse TOM-1. 122 mm FTI rocket is supplied
in wooden boxes.
The firing equipment is placed on the chassis unit which enables to tow the equipment by the terrain
vehicle UAZ-469, or medium lorry P-V3S/M.
Technical data:
Technical data:
Weight of the rocket
42.5 kg
Max. range
Weight of the FTI warhead
15.0 kg
Min. range
Electronic fuse
Distance of flight
Height of flight
Flying speed in the area of target imitation
6500 m
5200 m
TOM-1 with adjusting
Height of flight
600 ÷ 3700 m
4450 ÷ 6500 m
Elevation range
25° ÷ 70°
600 ÷ 3700 m
Angle range
360 °
100 ÷ 320 m.s-1
Total weight
250 kg
Imitation period of a light trace
30 s
Length of the tube
Imitation period of light interference / jam
4+2 s
Dimensions of the equipment
+5
Wheel gauge
2996 mm
1970 x 3480 x 1680
1660 mm
Legend:
1. Body (Warhead)
2. Switch
3. Top
4. Main substance with initiator
5. Jammer
6. Pad
7. Transport safety lock
8. Electric igniter 121B
9. Component polyester cement
10. Batt ø 18x2
11. Insulation pad
12. Electronic fuse TOM-1 + Batery 9V
13. Bolt M3x12
14. Expanding pin
15. Spring ø 8,3/08-19
16. O-Ring 87x1,5
21
AMMO SERVICE – TECHNICAL LIFE EXTENSION AND MODERNISATION
The aim of repair operations is to PROLONG THE LIFE TIME of ammunition. There is a greater economic return than the disposal of ammunition and the subsequent production of new ammunition.
Inspection
Inspection of customer‘s ammo material:
– Inspection of damaged parts and initiators
– Inspection and testing of technical parameters
1. Physical – chemical testing of all ammunition/
pyrotechnical elements (For example: Fuse, explosive,
igniter, propellant, charge powder)
2. Testing of electrical circuits
3. Visual checking, testing of mechanical parts, checking
of protecting paints,...
-Inspection of the packaging
Repair/Revision
Modernisation
– Replacing of damage parts
– Gun powder homogenization or its replacing
– Surface areas renovation and renewal
– Main technical parameters checking
– Cartridge case renovation including recalibration
– Inspection of ordnance from 30 up to 155 mm
– nspection of 122 JROF RM–70 “GRAD”
– Inspection of mortar bombs from 60 mm. 82 mm EOM up to
160 mm EOM
– Total revision (including motors) of ATGM type „Maljutka“,
„Konkurz“, „Fagot“
– RG–4 (hand grenade) repair
– Other activities upon the client‘s requirements
– The company is ready to perform the renovation of discharged
shells – i.e. to perform the resizing an surface treatment.
–The exchange (replacement) lighter – more reliable, safer,
smarter (eg. which is initiated when approaching)
– More resistant material (anti-corrosion paint, paint the new
generation)
– New surface protection round and cartridge
– The range extension
– The maximizing of the effect on the target - in the impact zone
–Various missiles variants HE, Illumination, Thermobaric,
Training...
– Replacement of outdated components (renewed stabilizer)
–More lightweight packaging and more durable transport
packaging
– Possible use of mobile technology line (Made by MSM GROUP)
– Complete Logistics
Report to customer with the proposal for:
1.Repair/ Revision
2.Modernisation
3.Ecological Liquidation
The Scope:
1.Revision, prolongation of life cycle or modernization of
calibres from 30 to 155 mm
2.Revision, prolongation of life cycle or modernization of
rockets 122 JROF „Grad“
3.Revision of Mortar Bombs of calibres 60 mm, 81mm, 82 mm,
98 mm, 120 mm, 160 mm
4.Anti-tank and anti-aerial guided rockets: Malyutka, Konkurz,
Fagot, IGLA
22
AMMO SERVICE – ECOLOGICAL LIQUIDATION
Ecological Liquidation
Rockets
– The ordnance disposal is intended to an ammo either beyond technical warranty or not suitable for
major overhaul operation.
– All risk and dangerous operations are performed automatically, by the equipment operating
behind the protective armour.
– Liquidation is carried out by the equipment developed, designed and manufactured by MSM
GROUP. The technology is approved by the respective environmental authority.
– All this gained material is given to the industrial usage. At the end of the total process there is the
waste water neutralization performed in neutralization station.
Air Bombs
The equipment is intended for placing, fixing and manipulating with TPH during its disposal operation
performed by power water eroding. The company owns special technology and the know-how to
ensure the ecological disopsal. There is a lot of knowledge and experience with ammunition disposal
and liquidation for Armed Forces of Slovak republic, for Ministry of Defence of Czech republic,
Hungary, Bulgaria etc. This know-how and technology can be used for various types of rockets.
Ammo of caliber
20–155 mm
The company performs the disposal of fuses which have been in use. The company has evaluated
and approved technology, process documentation and the equipment for every single type of
ammo. At the disposal performance it takes care of environment and make the disposal in friendly
environmental way.
Infantry Ammo
5.45–14.5 mm
Verification of Ecological Liquidation
MSM GROUP is disposed towards to realize the verification controls of disposal of ammunition
performed by the Control Body of Ministry of Defence of Slovak Republik and also by the third
parties. The company has been verified by the verification USA team after the disposal of 9M714K
in the 2001.
Fuses
Protocol about the disposal is issued after each disposal performance. The photo documentation
from the process of the disposal of individual types of ammunition is made according to customer
requirements.
Solid Propellant and
Rocket Carriers
MSM GROUP stores the samples of disposed parts and according to the customers requirements they
are submit to the verification team.
Pyrowaste
TNT,
powder charge,
solid rocket
propellant
Metal waste:
Fe, Cu, Pb, ...
Liquidation
For further processing
in the industry after
reprocessing
23
AMMO SERVICE – DESIGN AND DEVELOPMENT
MSM GROUP team designs, develops and produces stationary and mobile equipments, for example
special equipments and devices for repair, delaboration, liquidation, destroying, disposal, melting,
floating off and renewal of ammunition. The company provides complete supplies of complete
technological lines for repair, revision and disposal of artillery ammunition and rockets.
Within the technology lines delivery the company provides to the customers its special know-how.
MSM GROUP performs engineering and machinery production and related services, development
and production of special single-purposed equipments and devices. It offers design and consultancy
services in development and production area.
MSM GROUP offers the services in design by modern software and the production of single-purposed
equipments and of molds for polyurethane parts.
The main equipments are:
– Automatically controlled equipment for unscrewing of primer screw and fuse and the ammunition
disassembly to cartridge and missile at the same time
– Equipments for unscrewing / disassembly of rockets
– Equipments for explosive melting or floating off
– Equipments for explosive and gun powder treating
– Equipments for recalibration and surface treatment of cartridge case
The automatic line for Booster production
24
AMMO SERVICE – MOBILE TECHNOLOGY LINES
The company offers the delivery of revision and disposal equipments in stationary mode – placed right in a building, or in mobile mode – by establishment of mobile technology lines in special
mobile containers.
Features o mobile technology lines:
MSM GROUP has been awarded in 2013 by Prestigious Prize at International Exhibition of Defence
and Security Technologies IDET for Mobile technological line for destruction of ammunition:
– Placing on the chassis without own drive (container )
– High mobility feature and easy manipulation
– Variety of the containers set up / configuration
– Protection from explosion
– Machinery, device and software equipment are the same as for the stationary technology lines
Main benefits of mobile line:
– Cheaper delaboration (air shipping of the line is much lower than transporting of ammunition)
– Modular system according to customer’s requirements.
– The whole process finishes by ecological disposal of ammunition
Composition in 5 sections (A, B, C, D, E) provides the entire operation
process:
Section A: Mobile explosive-resistant storage houses for explosives
Section B: Storage houses for tools, preparations, devices, aids
Section C: Mobile disposal technology line
Section D: Mobile laboratory unit
Section E: Rest rooms, toilets
25
ELECTRONICS INDUSTRY
MSM GROUP employs the team of design engineers with excellent experience in the development in electrical engineering. Our production is mainly intended for customers from aviation.
Integrated navigation system for aviation NARASYS
Radars upgrades
– Extension of the technical life of 12 to 15 years
– Three-dimensional digital display of radar information and its distribution and connection to various
types of automated systems of command (ASC) and air system management (ASM)
– Implementation of identification systems - IFF according to NATO standards STANAG-4193, (Mode
4,5)
– Compatibility with anti-aircraft missile system S-300PMU
– Substantial increase of operational reliability and accuracy of radar information
– Reduce the number of transport units and operators
– Expanded Program for Assistance
Development, production and servis of the
systems NDB (NAVYRA) and the position markers
Upgrades 1RL139/ P-37 to 3-D radar
– The entire modernization was carried out according to customer-specific requirements and
opportunities of the modernization kit of the radar manufacturer in the areas of our company. Part
of upgrade has been the integration of EADS IFF systems MSR2000I meeting the requirements of
NATO standards (STANAG 4193, MARK X MARK XII).
– In 2009, we made further

modernization in cooperation with suppliers as EADS Deutschland and
LEMZ Moscow with integrating of FF systems MSSR-2000 with operations in Mode 4, 5 and S.
Upgrades of 3D surveillance radar
Main characteristics of the ST-68 MSK modernized radar:
– High probability of detection of small targets reflecting surface flying on small and ground heights
– Screen capture of targets with effective reflecting surface of 10 m2 within 360 km incorporating a
new Trigger mode of Transmitter
– High probability of fast-and slow-flying targets detection, including helicopters in hanging position
– High resistance to unintentional and intentional interference of various types, the possibility of
determining the pointer targets - jammer
– Protection against anti -radar missiles
– Automatic equation of primary echo signals with signals of responses of embedded identification
device /IFF/ with creating of full Radar info, info transmission in ASTERIX standard formats
– Possibility of up to 120 targets pathways automatic tracking for one turning of the antenna
– High mobility
The Ground Power Unite made by MSM GROUP
MSM GROUP in the scope of the electronics industry also produces the Switchboards cabinets, RF cables, Kryostar – the appliance for local cryotherapy, Ground power unites.
26
EXCALIBUR GROUP
EXCALIBUR ARMY Ltd. is an internationally respected defence
industry company, whose products have proved successful in
national as well as in foreign defence and security sector. The
company was established in 1995.
Main Activities
Sales of military vehicles and spare parts – Maintenance and
repairs of military vehicles – Production of spare parts and military
vehicles – Modernizations of wheeled and tracked vehicles – Sales
of weapons and ammunition – Expedition equipments and spare
parts – Servicing at customers‘ premises – Long-term storage of
equipments – Environmental-aware disposal of equipments –
Engineering
www.excaliburarmy.com
KARBOX is a Czech company with over fifty years traditional
production of quality containers and container and box bodies
for trucks. Containers, containerized facilities and box bodies
are delivered including custom made internal equipment in
various designs e.g. kitchens, laundries, field hospitals, ablution
containers etc. KARBOX is currently supplying its containers into
the NATO military camps through NSPA (NATO Support and
Procurement Agency).
www.karbox.cz
Heavy Duty High Mobility
Tactical and Logistic Trucks TATRA
TATRA PLASAN, the first 4x4 logistic
truck with armoured cab, which
meets the stanag 3-3a/3b level
T 815-780R59 19 270 4 x 4.1R
4 x 4 HIGH MOBILITY HEAVY DUTY
CARGO / TROOP CARRIER
T 810-1R0R26 13 177 6 x 6.1R
6 x 6 CARGO TRUCK / TROOP
CARRIER
T 815-7M0R39 29 306 6 x 6.1R
6 x 6 HIGH MOBILITY HEAVY DUTY
UNIVERSAL CONTAINER CARRIER
TITUS® – MRAP vehicle chassis
TATRA 6x6
T 815-790R39 29 300 6x6.1R
6x6 HMHD UNIVERSAL
CONTAINER CARRIER
T 815-7Z0R9T 44 440 8x8.1R
8x8 HMHD RECOVERY VEHICLE
T 815-790R99 38 300 8 x 8.1R
8 x 8 HMHD REFUELER 18,000 Liters
www.tatratrucks.com
27
MSM Martin, s.r.o.
MSM Martin, s.r.o.
Kasárenská 8, 911 05 Trencin
Slovak Republic
phone: +421 326 527 598
fax: +421 326 523 176
e-mail: [email protected]
Sladkovicova 29, 974 03 Banska Bystrica
Slovak Republic
phone: +421 484 345 600
fax: +421 484 345 602
ZVS Holding, a.s.
Ľ.Štúra 1, 018 41 Dubnica n/Váhom
Slovak Republic
phone: +421 903 654 346
ZVS Impex, a.s.
Ľ.Štúra 1, 018 41 Dubnica n/Váhom
Slovak Republic
phone: +421 915 885 695
MSM Martin, s.r.o.
Duklianska 60, 972 71 Nováky, Slovak Republic
phone: +421 465 180 111, fax: +421 465 180 201, e-mail: [email protected]
DUBNICAINADIVÁHOM
TRENČÍN
BANSKÁB
NOVÁKY BYSTRICA
SNINA
Košice
Bratislava
MSM GROUP, s.r.o.
Kasárenská 8, 911 05 Trenčín, Slovak Republic
Reg No.: 46553509, VAT ID No.: 2023455577
www.msm.sk
ČLEN SKUPINY:
MEMBER OF: