Oil Only Spill Kits

Transcription

Oil Only Spill Kits

www.prosorbents.com
1
Product Index
Sorbent Guides & Spill Control Information
Pages 4-9
Oil Only Sorbents
Pages 10-23
Melt Blown Pads and Rolls
Page 10
SMS Pads, Rolls and Drum Covers.
Page 11
Anti-Static Pads and Rolls
Page 12-13
Fine Fiber Oil Only Pads and Rolls
Page 14-15
Absorbent Boom
Page 16
Bilge and Spaghetti Boom
Page 17
Socks and Pillows
Page 18
Sweep, Spill Sacks and Loose Particulates
Page 19
Spill Kits, Oil Only
Page 20-23
Universal and Cellulose Sorbents
Pages 24-31
Melt Blown Pads and Rolls
Page 24
SMS Pads, Rolls and Drum Covers.
Page 25
Fine Fiber Pads and Rolls
Page 26
Netted Sorbent Boom, Socks and Pillows
Page 27
Cellulose Socks and Pillows and Netted Boom
Page 28
Loose Absorbents
Page 29
Spill Kits, Universal
Page 30-31
Haz-Mat Polypropylene Sorbents
Pages 32-35
Fine Fiber Pads and Rolls
Page 32
Haz-Mat Yellow Socks and Pillows
Page 33
Spill Kits, Haz Mat
Page 34-35
Spill Accessories
Pages 36-39
Rail Mats and Industrial Rugs
Pages 36-37
Spill Containment Berms & Tarps
Page 38
Poly Sheeting and Liners
Page 39
2
www.prosorbents.com
Product Highlights
No. FF10129
No. FF20129Y
No. FF20129
No. FF20129G
Integrity, Reliability, Quality
www.prosorbents.com
3
Sorbent configurations and uses
Melt-Blown: Melt Blown polypropylene is produced by melting resin and blowing long fibers randomly onto a collector producing a Non-woven fiber. It resembles mashed cotton candy fibers. This product is widely used for emergency
clean up, catching drips from machinery and is considered the economy version. It is a basic tool to address common
issues where tight requirements are not required.
Sonic-Bonded: This mainstay of the sorbent industry is constructed from a single layer of high-quality, uniform polypropylene fibers “sonically” bonded together. This process creates dimples that add strength and reduce linting. Pound
for pound, this product offers the greatest absorbency of the melt blown family.
Anti-Static: Prosorbents™ Anti-Static pads and rolls pass NF PA 99 standards and Meets Mil-STD-301C, Method
4046 for static decay and surface resistivity
This absorbent pad is specifically designed to selectively absorb vaporous flammable hydrocarbon based fluids, such as
gasoline and Jet A fuels to name a few. The anti-static additive reduces the possibility of static charge in the presence of
volatile fluids.
SMS: Spun Bond / Melt Blown / Spun Bond: This product is used in non-lint applications where tough jobs such as
wiping and scrubbing is required. The spun bond outer coverings are made from polypropylene, but made by spinning
the fibers into a very strong and thing material. The out covering does not aid in the total absorption in a significant way,
however it allows the user to wring out and re-use the material several times. Once saturated it will also not break apart
from the weight of the material. Other uses include lining tool cribs, catching drips, wiping down sensitive equipment
that require non-lint or to simply able to wipe off hands.
Fine-Fiber: Precision-engineered and manufactured to maximize loft and absorbency, our premium-grade Fine Fiber
melt blown sorbents provide high absorbency. Premium fine fiber covers provide low lint and fast wicking. They are
ultrasonically bonded to a high-loft melt blown core. Pads and rolls are perforated.
Cross and Center perforations: Like the perforations in your paper towels, and toilet paper, we add this to the pads if
the customer requires them. It allows the user to more effectively use what is needed and save money.
Color: Color of the sorbent is an indicator of its function and disposal coordination.

White and Blue is to absorb hydrocarbons only,

Gray is Universal and used to absorb all liquids.

Green is used for Environmental, Chemical or Haz-Mat, and absorbs all liquids.

Yellow is Haz-Mat and can be used for all liquids.
You can use color to help segregate your disposal. For instance, the yellow pads can be used to pick up sulfuric acid and
the Green pads used to pick up bleach.
4
www.prosorbents.com
What do you need?
Everyone us has tried to make something work no matter what it took, believing it will save money and that MacGyver
has nothing on us. It might prove that we have the ingenuity of an 80’s TV Star, but we are most likely wasting time and
money.
By simply taking the time to survey your area, you should start to notice a few things like:

Slope: War ehouse floor s, dr ive ways, par king lots and natur al ter r ain will show you wher e the spill will tr avel. The trick here is not to chase the spill but meet the spill with the products in a strategic location. Drop a golf ball
and see where it rolls…...

Water Ways: If you ar e near bodies of water , you will have to take stock and imagine the wor se case scenar io
possible and prepare for it. Have an action plan in place along with adequate material on hand. When Hydrocarbons
hit the water, it can spread very quickly.

Response: How far and How much? How far will your r esponse team have to go get to a spill, and how much
material will they need to carry. Shortening the response time and having adequate material in strategic locations
will allow your response team to adequately and effectively address the spill.
Loose Particulates: Used for damming the spill, and offers great coverage as the responder can broadcast the particulates into he spill. .
Socks and Pillows: Socks can be used to contain spills on water or land, absorbs as it blocks the spill will pillows are
passively to absorb large volumes and or catch drips and leaks
Boom: Used to contain spills on water and land. Comes indifferent diameters and configurations. The two types of
boom, standard which the sorbent material is encased with in a spun bond material surrounded by polyester netting, rope,
rings and snaps. Spaghetti boom does not have the sock material but instead strips of melt blown oil only white material
encased in the polyester netting, rope, rings and snaps. The purpose of the Spaghetti boom is to allow water to pass
through while catching thick hydrocarbons.
Pads and Rolls: F or quick coverage of a spill or to catch drips from machinery and vehicles. The ease of replacement
and low cost per use makes this a very affordable solution.
Sweep: To “polish” the water by removing the oil sheen off the water. This product can be used passively or actively.
A reinforced Polypropylene webbing allows the product to be dragged across the water or anchor the skimmer to allow
the water to pass under it.
Snare: Used to capture very thick oil from the water making into a Tar Ball. Can be used individually by hand or
used on a 50 foot rope with 30 attached to drag through the water. Can be steam cleaned to re-use a few times.
Pom Pom: Used to pick up light oils and fuels from the water. Can be used individually to scrub rock, trees and shore
lines. Or 30 Poms on a 50’ rope to drag through the water or used in place to catch oils as they pass by in the current.
Spill Kits: Spill kits contain a specific list of products that facilitates the adequate response to a spill or supports an
established maintenance plan: Spill kits can be customized to meet the users needs.
www.prosorbents.com
5
Absorbent capacity by volume
The definition of an absorbent is: “a material having capacity to absorb another substance”
If you look at absorbents as a container, you should be able to judge approximately how much something can hold or
absorb based on the container size. Absorbents that are made from Polypropylene, Polyester, Clay, Perlite, Peat Moss,
Cotton recycled fabrics and other like material are limited to a fixed capacity by their static volume, and do not swell in
any meaningful way to increase the volume of the product.
Absorbents such as Polymers and some Cellulose will swell to increase in volume to allow more liquid to be absorbed or
solidified. Cellulose absorbs the liquids and pulls into its cells which makes it swell to accommodate more liquid. Polymers such as Sodium and Potassium Polyacrylate, are man made for a specific reaction with aqueous liquids and swell
to the designed capacity.
To find the capacity of an absorbent, we have to do some math to determine the volume of the product. But there are few
things we need to know:




1728” cu. inches is equal to 1 cu ft. (12” x 12” x 12” = 1728”)
1 cubic foot of space will hold 7.5 gallons of liquid.
Volume of a cube (bales of pads, pillows, sweep) L x W x H / 1728” = X cubic feet
Volume of a cylinder (boom, socks and rolls) πr²h / 1728” = X cubic feet
First find the cubic footage of the product, then multiply by 7.5 and you have the volume in gallons of the empty container. We are not using empty containers of course, and depending on density, you can figure up to 80% of the volume
of the container is your actual capacity or absorbency. However the more dense the absorbent is the less it will be able to
absorb.
Volume of a Cylinder
After you find the volume of your roll, sock or boom, you can figure that the sock
or boom will hold up to 80% of its total volume.
V = πr²h
Where:




So if the total volume of an absorbent boom, 5” x 10’ is 1.36 ft.³’,or 10.2 gallons.
Then your actual capacity is approximately 8.16 gallons.
V = Volume
h = height
π (pi) = 3.1416
r² = radius squared
(radius times radius)
V = 2.5²” x 3.1416 x 120” = 2,356.2³” / 1728” = 1.36 ft³
1.36 ft³ x 7.5 gal = 10.2 gallons
10.2 gallons x 80% = 8.16 gal. actual absorption capacity.
Volume of a Cube
V=LxWxH
Where:




6
V= Volume
L= Length
H= Height
W= Width
After you find the volume of your Pad, Pillow or Sweep, you can figure that it will
hold up to 80% of its total volume.
So if the volume of a 15” x 18” x 18” bale of pads equals
2.81 ft.³’or 21.09 gallons. Then your actual capacity is approximately 16.9 gallons.
V = 15” x 18” x 18” = 4,860³” / 1728” = 2.8125 ft³
2.8125 ft³ x 7.5 gal = 21.09 gallons
21.09 gallons x 80% = 16.9 gal actual absorption capacity.
www.prosorbents.com
Absorbent capacity by weight.
Finding the absorbent capacity by multiplying the weight of the product…..
The problem with multiplying the weight of an absorbent to find the capacity, is that the liquids they absorb will vary in
weight. We see on various websites and literature, claims of absorbency from 15 to 30 times its own weight for polypropylene absorbent pads.
Using the 15 times its own weight formula and if the bale of pads weighs in at 14 lbs., then we can conclude it will absorb 210 lbs. of liquid. (15 x 14 = 210 )
We know that a “Gallon” is a unit of measure and the volume capacity of a gallon never changes. We also know that
different liquids have different densities and weights. One gallon of Water is 8.3 lbs. per gallon and Gasoline is 6.3 lbs.
per gallon. So based on the absorbency ratio above, how is it that the same bale of pads can only pick up 25.3 gallons of
water but can pick up 33.33 gallons of gasoline.
If the temperature rises above 60° F, the lighter fuels will start to expand and they will start to weigh less per gallon. If
one gallon of gasoline in volume is equal to one gallon of water, then how do you get different numbers on bale of pads
that does not expand.
Some examples of average gallon weights of different liquids, at 60° F. (FAA Standard Benchmark Temp)






50% Sodium hydroxide 12.8 lbs. per gallon
Water
8.3 lbs. per gallon
30 weight Motor Oil
7.5 lbs. per gallon
No. 2 diesel
7.15 lbs. per gallon
Jet A
6.6 lbs. per gallon
Gasoline
6.3 lbs. per gallon
If the above example is true, then the one bale of pads able to absorb 28 gallons of 30 weight motor oil, has to somehow
increase in size to pick up 33.3 gallons of gasoline.
To pick up 28 gallons of 30 weight oil you will need a bale of pads measuring 3.73 cubic feet (15” x18” x 24” bale) and
then expand to a 5.2 cubic foot (15” x 18” x 33”) bale to pick up 33.3 gallons of gasoline. We are asked to believe that
somehow, a Polypropylene bale that does not expand, grows 9” taller based on a liquid type and weight of the liquid.
However, this method of figuring out capacity is used in factoring budgets and to determine what is required to address
emergencies in some of the largest companies and agencies. Which over time, it has proven out that every emergency
spill has fallen short
Conclusion……
There has to be some sort of balance between volume and weight of the product. You can’t have such a high loft
product that weighs almost nothing. Having a high loft underweight bale may look nice but the fibers are so weak
and far apart they will not be able to hold the liquid or even stay together when saturated. And then if the product is
so dense and heavy, the fibers will be so close together the capacity of liquid it can handle is restricted.
Essentially, we have to find the product that exhibits enough loft to give us the capacity , and the proper weight of
material to give you the strength. Of course other factors come into play such as the quality of resin used, the machine , and the methods of producing the absorbent.
The best method is to ask for the dimensions (L x W x H) and weight of the bale and if it falls with in an average
weight of 3.3 lbs. to 4.3 lbs. per cubic foot, then this should be ok for a quick assessment.
www.prosorbents.com
7
Work Place Safety
29 CFR 1910.22(a)(2) - Floors in your workplace should be, “maintained in a clean and, so far as possible, a dry
condition."
You can see the action word “Maintained in a clean….dry condition”, this is stating that you should have a PM (preventive maintenance) in place and this should be looked at every day. Keeping floors clean and dry, reduces the chance of having slip and falls in
the work place.
Employee and customer slip and falls is a very costly and the long term costs of higher insurance rates over several years far out
spends the cost of maintaining a simple PM program to prevent such accidents.
Beside the obvious penalties a business can face from what was mentioned above, one of the most over looked benefits of using spill
products in your preventative maintenance programs is to improve the bottom line profit of a company.
By using the proper tools and disciplines, you will cut down on the cost of labor, improve productivity and gives the sense of pride
in your business. It makes a very strong statement to the employees and all who come by for a visit.
You can purchase inexpensive products that would normally be used to address spills related to incidents or accidents, and use them
to help keep your work area clean and safe. Some people read the CFR regulations as something a business has to buy and store and
hope to never to use it.
Albeit this is one of the topics that is not on the forefront of minds of many business owners and managers. But it should be. It is one
of those expensive hidden costs that can hurt a company that is looking at what costs hit the profit margins.
There are many business unfortunately make the fateful statement “ Well we have never had an incident”, and all the years of not
buying spill products, one incident wipes out everything they believe they saved, and maybe the entire business.
Below are some of the costs you should be aware of, but keep n mind that “Indirect Costs” are normally many times more expensive
than that of direct costs.
Incidents and accidents always come at the worst time, be it bad economies, low sales or tight profit margins. But these are the times
where you should protect your self the most, this is when you can not afford a fine or an accident.
The National Safety Council (NSC) reports that slips and falls are the most common cause of emergency room visits. The most frequent complaints related to slips and falls are shoulder, back, elbow, wrist and knee injuries. According to the U.S. Department of
Labor (DOL), an average slip/fall injury costs roughly $28,000.
This puts a financial strain on individuals and companies alike, since slips and falls are the third largest cause of workplace injuries.
Within North America, these injuries lead to approximately 104 million lost workdays each year which translates into approximately
$36 billion dollars annually.
The profits you are trying to hold to now could be gone in a instant if you are not prepared for an accident or incident.
Indirect costs such as:
Direct costs such as:

Lost or decreased productivity

Workers’ compensation

Administrative costs

Medical costs,

Overtime pay

Higher Premiums

Replacement hiring

Possible Law Suit and Legal Fees

Employee morale

Slowed work pace due to fear of injury
8
www.prosorbents.com
Spill Kits
The use of Spill Kits helps you comply with 40 CFR 112.7 (1) (v11) & 40 CFR 263.30(a)
Spill kits normally come in three different types, Oil Only, Universal and Hazardous Material. Each one is used as a tool for a specific purpose, such as Spill Control, Regulatory Compliance and Preventive Maintenance and can be customized to meet the individual
needs of the user.
Incase of a Spill:
If you are looking to keep a few spill kits on the floor in case of a spill, you are going to have to be honest with yourself and try to
imagine what would be the worst case scenario. Your worst case scenario would probably determine how many gallons of liquid you
are going to have to address. This will determine the size of your spill kits, either by itself or in combination of several kits.
Compliance:
If you are looking just for compliance, you are going to have to focus on what I mentioned above. Because they are going to ask
“what if’s” and they are also going to ask, what is your worst case scenario and what are the plans to do deal with.it..
Preventive Maintenance:
If you are supporting a preventive maintenance program, you will pay back your investment by ten fold. By simply following your
PM program, you will reduce your exposure to costly slip and falls, if there is a spill you are ready, and save on labor cleaning up
messes with the correct tools and getting your employees back to work.
The preventive Maintenance the best methods to employ. By using this method are incorporating all three areas mentioned above,
Spill, Compliance and Maintenance. Not only are safeguarding your bottom line, you are actively involved in making sure that your
employees and customers are safe and you are protecting your business.
Below is a sample list of the instructions we put into the spill kits we produce. If you have specific instruction you would like to have
in the spill kits for your business, contact us and we will be more than happy to help.
Spill Kit Instructions
Identify
Notify
PPE
Contain
Clean
Ensure you are using the correct spill kit for the spill. If spill is unknown, follow your established policies.
Notify the proper personnel, dept. or agencies as per your contingency plan.
Don appropriate safety gear prior to addressing spill.
Use socks, boom or dikes to dam the spill from spreading.
Use pads, pillows or loose particulates to pick liquids. Place used material in disposal bags.
Disposal
Dispose of spill clean-up per your local, state and federal regulations. Contact your local
disposal company for clarification.
Replace
Replace the used contents or kit as soon as possible. You should have at least one in reserve to ensure you have a kit in the ready, as you replace the used material or kit.
Update
Make sure your call list is up to date. You should be able to contact someone in your chain
of command or the responsible agency / dept. you are required to call in case of a spill incident.
Review
Review your contingency plan. Was it adequate, clear and helpful in the containment and
clean up of the spill. Was the kit adequate for the spill?
www.prosorbents.com
9
Oil Only Absorbent Melt Blown Pads and Rolls
The following products help you comply with:29 CFR 1910.22(a)(2) - Floors in your workplace should be, “maintained in a
clean and, so far as possible, a dry condition."
Supply Pro-Fine Fiber™ technology is a unique process that is used in our Technical and Medical Grade
products. This process of producing long fine fibers, is used in our absorbent products creating a highly
absorbent and strong fine fiber material. The longer fiber length gives our pads higher tensile strength,
more durability, and greater aloft allowing greater absorbency than other standard melt blown pads.
Prosorbents™ Oil Only Melt Blown Pads come in various lofts and can be bonded and or perforated for
any job, spill or day to day maintenance requirements. You will find our products in many different
industries such as manufacturing facilities, coolant plants, gas stations, harbors, automotive shops, air
ports, warehouses, hospitals, environmental response and many other markets to control costs, improve
the working conditions and to effectively clean up spills.




Absorbs petroleum and petroleum based liquids such as lubricants, fuels and pesticides without absorbing water.
The natural white material alerts the customer to machine leaks and the current saturation level of the pads.
Pads are ideal for catching drips and soaking up spills off water or on land.
Prosorbents™ flame resistant oil only pads melt when exposed to high heat.
Oil Only Melt Blown Sorbent Pads
Item No.
Product Description
Type
Absorbency
Packaging
Units/Skid
Pad
65 gallons
50/Bale
15
SP100SB 17” x 19” Heavy Oil Only Pad.
Pad
34 gallons
100/Bad
30
SP200SB 17” x 19” Light Weight Oil Only Pad
Pad
34 gallons
200/Bale
30
13029-SB1 30" X 40" Heavy Weight Oil Only, dimpled King Pad, one layer spun bond.
10009
15" X 18" Heavy Weight Oil Only Pad.
Pad
21 gallons
100/Bale
30
10029
15" X 18" Heavy Weight Oil Only Dimpled Pad.
Pad
21 gallons
100/Bale
30
10007
15" X 18" Medium Weight Oil Only Pad
Pad
16.4 gallons
100/Bale
42
10027
15" X 18" Medium Weight Oil Only Dimpled Pad.
Pad
16.4 gallons
100/Bale
42
10005
15" X 18" Light Weight Oil Only Pad.
Pad
12 gallons
100/Bale
50
14005
Pad
24 gallons
200/Bale
30
14025
15” x 18” Light Weight Oil Only Dimpled Pad.
Pad
24 gallons
200/Bale
30
Type
Absorbency
Packaging
Units/Skid
Oil Only Melt Blown Sorbents Rolls
Item No.
10
Product Description
11009
36" X 144' Heavy Weight Oil Only Roll.
Roll
36 gallons
1/Bale
18
11029
36" X 144' Heavy Weight Oil Only Dimpled Roll.
Roll
36 gallons
1/Bale
18
11229
36” x 144’ Heavy Weight Oil Only Dimpled, Cross and Center Perforated
Roll
36 gallons
1/Bale
18
15029
18" X 144' Heavy Weight Oil Only Dimpled Split Roll.
Roll
36 gallons
2/Bale
18
11007
36" X 144' Medium Weight Oil Only Roll.
Roll
28 gallons
1/Bale
18
11027
36" X 144' Medium Weight Oil Only Dimpled Roll.
Roll
28 gallons
1/Bale
18
11227
36” x 144’ Medium Weight Oil Only Dimpled, Cross and Center Perforated
Roll
28 gallons
1/Bale
18
15027
18" X 144' Medium Weight Oil Only Dimpled Split Roll.
Roll
28 gallons
2/Bale
18
11005
36” x 144’ Light Weight Oil Only Roll.
Roll
16 gallons
1/Bale
18
www.prosorbents.com
Oil Only SMS Pads, Rolls and Drum Toppers
The following products helps you comply with, 29 CFR 1910.22(a)(2) - Floors in your workplace should be, "maintained in a
clean and, so far as possible, a dry condition."
SMS (Spun Bond/Melt blown/Spun Bond) sorbents assures great strength and sorption
capabilities to address the most demanding of industrial applications, yet allows the use
around sensitive equipment and clean rooms due to its non-limiting construction.
SMS three layer sorbents are built by ultrasonically welding our melt blown polypropylene between two layers of high tensile strength, non-linting, Spun Bond polypropylene









Three layer SMS can be used in non linting situations to address the capture of oil based fluids
Sonic bonded three-layer material to give added strength for tough jobs and high traffic areas.
Prosorbents™ Fine Fiber technology is specifically designed to handle demanding tasks and large volume cleanups.
Flame-resistant material won't burn immediately like cellulose absorbents.
The two spun bond outer layers give great tensile strength.
Can be wrung out and incinerated after use to reduce waste.
Repels water while afloat to clean up spills on water (Hydrophobic).
The natural white color draws attention to machine leaks and alerts the user of the current saturation level of the pads during a spill cleanup.
Pads are ideal for catching drips and soaking up spills.
Three layer SMS Oil Only Sorbent Pads and Rolls
Product No.
Type
Absorbency
Package
Units/Skid
30129
15" X 18" SMS Heavy Weight Oil Only Perforated Dimpled Pads.
Product Description
Pad
26 gallons
100/bale
30
30127
15" X 18" SMS Medium Weight Oil Only Perforated Dimpled Pads
Pad
18 gallons
100/bale
42
31229
36" X 144' SMS Heavy Weight Perforated Oil Only Dimpled Roll.
Roll
36 gallons
1/bale
18
31227
36" X 144' SMS Medium Weight Perforated Oil Only Dimpled Roll.
Roll
28 gallons
1/bale
18
Three Layer SMS Oil Only Sorbent Drum toppers
These pads keep drum tops are clean and easy to maintain. Drum toppers are pre-cut with
holes to fit 55 gallon steel drum tops, to absorb the oils and fuels with out absorbing water. The Spun Bond outer covers will not leave behind fibers or shed.





Oil only Three layer SMS used to address the capture of oil based fluids, and will
not leave behind residue.
Two pre-cut holes to accommodate for 3/4" and 2" bungs to provide a perfect fit on
55-gallon steel drum tops.
Catch pump drips and spills providing easy maintenance and clean up.
Three layer SMS sonic bonded construction will not tear or lint.
Product No
SPDT25
Product Description
Type
Absorbency
Package
Units/Skid
24" dia. SMS Heavy Weight Oil Only Dimpled Drum Top.
Pad
7 gallons
25/BOX
80
www.prosorbents.com
11
Anti-Static Oil Only Absorbent Polypropylene Pads and Rolls
“The surface resistivity testing and electrostatic decay testing indicate that the Supply Pro Absorbent pads are static
dissipative; the pads passed testing at both 12%RH and 50%RH.”
Testing of Static resistivity and electrostatic decay conducted by:
RMV Technology Group, LLC
NASA-Ames Research Center (ARC)
Moffett Field, CA 94035-0001
Features:
Prosorbents™ pads and rolls pass NF PA 99 standards and Meets Mil-STD-301C,
Method 4046 for static decay and surface resistivity
Anti-Static absorbent pads are specifically designed to selectively absorb hydrocarbon based fluids, such as motor oil, jet fuel, gasoline, diesels, kerosene, hydraulic
oil, pesticides and many other petroleum based liquids, without absorbing water and
dissipating static electricity.

Special ingredient blended into the resin to dissipate static; meets NFPA 99 standards for static decay

Packaged in special static-dissipative bags to help reduce static charge buildup

Ideal for use in dry or confined spaces where flammable vapors may be present

Absorbs and retains acetone, benzene, gasoline, toluene, xylene, mineral spirits, jet fuels and other flammables.

100% polypropylene rolls and pads are sonic bonded.

Highly absorbent, fine-fiber construction won't leave behind liquids.

Bright white color makes absorbed oil easier to see and clearly shows saturation level during spill response

Heavy-weight construction is highly durable and absorbent for demanding tasks and large-volume cleanups

Flame-resistant material won't burn immediately like cellulose mats; melts when exposed to high heat while on the job

Can be wrung out and incinerated after use to reduce waste or for fuels blending
Product No.
10029-AS
11029-AS
Product Description
15" X 18" Heavy Weight Oil Only Perforated Dimpled Pads.
36" X 144’ Heavy Weight Oil Only Perforated Dimpled Pads
Type
Absorbency
Package
Units/Skid
Pad
Pad
26 gallons
18 gallons
100/bale
100/bale
30
42
NFPA 77, NFPA 99 certified. Meets Mil-STD-301C, Method 4046.
29 CFR 1910.22(a)(2) - Floors in your workplace should be, "maintained in a clean and, so far as possible, a dry condition."
29 CFR 1910.106(h)(7(i)(a) - When working with or around flammable liquids, precautions must be taken to prevent static and other
sources of ignition that could ignite flammable vapors.
12
www.prosorbents.com
www.prosorbents.com
13
Fine Fiber Blue Oil Only Absorbent Pads and Rolls
The following products help you comply with:
29 CFR 1910.22(a)(2) - Floors in your workplace should be, “maintained in a clean and, so far as possible, a dry condition."
40 CFR 112.7(5)”make them readily usable in an emergency, and include appropriate supporting material as appendices.”( c )“At a
minimum, you must use one of the following prevention systems or its equivalent:”(vii) Sorbent materials.
Prosorbents™ Fine fiber pads
and rolls are constructed from
melt blowing a polypropylene
cover stock of 1 oz. per square
yard, material.
We create a dense smooth finish
by blowing a fiber less than 5
microns at slower speeds to give
a low-linting and a high tensile
product.
After we have made the cover
stock, we then blow a high capacity melt blown polypropylene fiber, and sonic weld the cover stock to the top and bottom of the melt blown high capacity fiber material, leaving a polished
quilted appearance and an incredibly absorbent and strong product.
Supply Pro-Fine Fiber™ technology is a unique process that is used in our Technical
and Medical Grade products. This process of producing long fine fibers, is used in
our absorbent products creating a highly absorbent and strong fine fiber material.
The longer fiber length gives our pads higher tensile strength, more durability, and
greater aloft allowing greater absorbency than other standard melt blown pads.
White Fine Fiber pads are highly visible and the visual cues are much like all the
other white sorbents we use to clean up spill. Easy to see when to change out the
pads when they hit capacity, but with three layers, it will not fall apart when saturated.
Blue Fine Fiber sorbent pads and rolls are a
unique product that allows for high visibility to
track and segregation. Blue is also a color indicator for environmental optics.
White Fine Fiber FF10129
When we see ‘Blue’ , most of us relate this to “clean blue water” , and this product is
used especially in spill clean up off water as it can calm some concerns about the
spill and you are using a product that is very strong and highly absorbent.
Blue Fine Fiber FF10129B
14
www.prosorbents.com
Fine Fiber White Oil Only Absorbent Pads and Rolls










Fine Fiber sorbents, are produced by sonic welding two sheets of Fine Fiber cover stock to the inner
sorbent core of polypropylene melt-blown sorbent.
Specially sonic-bonded three layer material to give added strength for tough jobs and high traffic areas.
ProSorbents™ Fiber Technology is specifically designed to handle demanding tasks and large volume
cleanups.
Strong enough to capture and contain aggressive liquids.
Absorbs petroleum and aqueous based liquids.
Absorbs and contains acid and caustic solutions.
Prosorbents™ flame-resistant material melts when exposed to high heat while on the job.
Fine Fiber White Oil Only Absorbent Pads and Rolls
Oil Only Fine Fiber Melt Blown Sorbent Pads
Item No.
Product Description
Type
Absorbency
Packaging
Units/Skid
FF10129
Pad
21 gallons
100/Bale
30
FF10127
Pad
16.4 gallons
100/Bale
42
FF14025
Pad
24 gallons
200/Bale
30
Type
Absorbency
Packaging
Units/Skid
Oil Only Fine Fiber Melt Blown Sorbents Rolls
Item No.
Product Description
FF11229
Roll
36 gallons
1/Bale
18
FF15129
Roll
36 gallons
2/Bale
18
FF11227
Roll
28 gallons
1/Bale
18
FF15127
18" X 144' medium Weight Oil Only Dimpled Split Roll.
Roll
28 gallons
2/Bale
18
Absorbency
Packaging
Units/Skid
Fine Fiber Blue Oil Only Absorbent Pads and Rolls
Oil Only Fine Fiber Melt Blown Sorbent Pads
Item No.
Product Description
Type
FF10129B
Pad
21 gallons
100/Bale
30
FF10127B
Pad
16.4 gallons
100/Bale
42
FF14025B
Pad
24 gallons
200/Bale
30
Type
Absorbency
Packaging
Units/Skid
Oil Only Fine Fiber Melt Blown Sorbents Rolls
Item No.
Product Description
FF11229B
Roll
36 gallons
1/Bale
18
FF15129B
Roll
36 gallons
2/Bale
18
FF11227B
Roll
28 gallons
1/Bale
18
FF15127B
18" X 144' medium Weight Oil Only Dimpled Split Roll.
Roll
28 gallons
2/Bale
18
www.prosorbents.com
15
ProSorbents™ Oil Only Polypropylene Boom and Bilge Boom
The following products help compliance with:
33 CFR 154.1047(c)(2) “ Containment boom, sorbent boom, silt curtains, or other methods for containing the petroleum oil that
may remain floating on the surface or to reduce spreading on the bottom.”
40 CFR 122.26 “ Facilities must have a detailed plan in place to prevent illegal discharge of pollutants into waterways.”
40 CFR 112.7(c)(1) “Facilities must have "appropriate containment and/or diversionary structures to prevent discharge oil from
reaching a navigable water course."
Oil Only Boom
ProSorbents™ Oil Only Boom solid construction is made with
the highest quality components to produce the most effective oil
absorbent containment boom on the market. Pro-Boom does not
have voids to compromise performance and you can rely on the
steel nickel plated rings, carabineer style steel nickel plated
snaps, UV resistant polyester netting and high tensile strength
rope to help eliminate boom roll.
Pro-Boom is primarily used to absorb / skim oil based spills from
all types of terrain and bodies of water. Link together into barriers of any length for containment and absorption. Manufactured
using an outer net of polyester and an inner sock of spun bond
polypropylene.

Rope running along length of Boom adds strength for deployment and retrieval.

Strong, carabineer style, steel nickel plated steel bit snaps and rings allow you to link Booms together for

Oil-Only Polypropylene fill is highly absorbent and selective in absorbing oil-based spills in a variety of environments.

Tough outer netting resists snags and debris while remaining pliable

Spun bond polypropylene skin is UV resistant and meets NFPA 99 standards for static decay.

Absorbs and retains oils and oil-based liquids—including lubricants, fuels and cleaning agents.

Hugs ground to contain spills on land; floats on water to contain and soak up spills on water.

Can be incinerated.
Product No.
16
Product Description
Type
Weight
Packaging
Units/Skid
B510
5" X 10' Sock & Net Oil Only Boom with Snaps, Rings and Rope.
Boom
20 lbs.
4/Bale
24
B810
8" X 10' Sock & Net Oil Only Boom with Snaps, Rings and Rope.
Boom
40 lbs.
4/Bale
16
www.prosorbents.com
Absorbency
greater length.
ProSorbents™ Oil Only Polypropylene Spaghetti and Spill Sacks
The following products help compliance with, 33 CFR 154.1047(c)(2) “ Containment boom, sor bent boom, silt
curtains, or other methods for containing the petroleum oil that may remain floating on the surface or to reduce spreading on the bottom.”
Oil Only Spaghetti Boom
ProSorbents™ Spaghetti Boom allows thick oils to efficiently flow through the material
by allowing the thick oil to penetrate deeply into the boom. The tough outer mesh net
protects and keeps the material in place as the spaghetti strip absorbent filler are specially
designed to contain, attract viscous oil based liquids deeply into the boom.
ProSorbents™ Spaghetti Boom are normally used in fast currents and cold waters. In
cold water applications, the oil thickens and the open net and the spaghetti like strips allows the oil to penetrate deeply and quickly.

Rope running along length of Boom adds strength for deployment and retrieval.

Strong, zinc-plated carbon steel attachment clips and rings allow you to link Booms together for greater length.

Oil-Only Polypropylene fill is highly absorbent and selective in absorbing oil-based spills in a variety of environments.

Tough outer mesh resists snags and debris while remaining pliable.
Product No.
Product Description
Type
Weight
Packaging
Units/Skid
B510SB
5”x 10’ Oil Only Spaghetti Boom. Snaps, Ring and rope.
Boom
20 lbs.
4/Bale
24
B810SB
8”x 10’ Oil Only Spaghetti Boom. Snaps, Ring and rope.
Boom
40 lbs.
4/Bale
16
Oil Only Bilge Boom
Bilge booms are used to keep the boat bilges clean and free from fuel oils. Also, these
may be used in other applications such as in water separators, storm drains, collection
ponds, storm drains, wells and many more other special purposes.
Lower a bilge boom into your bilge, sump, catch basin or tank to remove oil, not water. Bilge booms float on top of the water, even when completely saturated. Prosorbent™ Bilge Booms are highly absorbent and come with a looped rope for easy
deployment and retrieval.
Product No.
Type
Weight
Packaging
Units/Skid
BB518
5" X 18” Sock & Net Oil Only Bilge Boom with looped rope end.
Product Description
Boom
20 lbs.
4/Bale
24
BB818
8" X 18” Sock & Net Oil Only Bilge Boom with looped rope end.
Boom
40 lbs.
4/Bale
16
www.prosorbents.com
17
ProSorbents™ Oil Only Polypropylene Boom
The following products help compliance with, 33 CFR 154.1047(c)(2) “ Containment boom, sor bent boom,
silt curtains, or other methods for containing the petroleum oil that may remain floating on the surface or to reduce
spreading on the bottom.”
Oil Only Socks
Description:
A highly absorbent sock filled with oil only polypropylene fibers, incased with
a very strong, tear resistant blue polyester outer skin.
Features:
Wrap around machines bases to catch machine leaks or used to contain spills,
keeping floors in the work and high traffic areas clean and dry.

Prosorbent™ oil only socks are flexible and can be molded into tight areas and around corners of equipment that may leak.
Also to be used in water separators.




Sock used in spill containment creates a barrier to prevent spilled liquids from spreading.
Can be incinerated.
Polypropylene fill is highly absorbents and flexible.
Absorbs and retains oil based fuels and lubricants while repelling water.
Able to float on water while absorbing oils
Product No.
Product Description
Type
Absorbency
Packaging Units/Skid
SPS348O
3" X 48" Oil Only Knit Sock, Polypropylene Fill.
Socks
40 gallons
40/BOX
18
SPS396O
3" X 96" Oil Only Knit Sock, Polypropylene Fill .
Socks
40 gallons
20/BOX
18
SPS3120O
3" X 120" Oil Only Knit Sock, Polypropylene Fill .
Socks
38 gallons
15/BOX
18
SPS3144O
3/; X 144” Oil Only Knit Sock Polypropylene Fill.
Socks
30 gallons
10/BOX
18
Oil Only Pillows
Absorb spills on water or land without absorbing a drop of water. ProSorbents Pillows float on water for picking up contained
oil but can also be used for land-based spills and leaks. Great
for placing into small, tight places while capturing high volumes of liquid.
Product No.
Product Description
P1010
10” x 10” x 2” Polypropylene Fill
P918
9" X 18" X 2" Polypropylene Fill
P1818
18" X 18" X 2"Polypropylene Fill
18

Pillows used in spill cleanup, can accelerate clean up.

Can be incinerated.


Easy to deploy and retrieve high capacity pillows during
Type
Pillows
Pillows
Pillows
www.prosorbents.com
Weight
30 lbs.
15 lbs.
30 lbs.
Packaging
30/ Box
20/Box
10/Box
Units/Skid
18
18
18
Spill Sacks, Sweep and Poly Pulp
ProSorbents Spill Sack
PROSORBENTS™ Sweep is manufactured with durability in mind. A melt blown polypropylene folded bale with an end to end woven polypropylene reinforcing strap, makes
for ease of use on the job site. The polypropylene is also sewn on the outside edges for
extra strength.
Two straps extend from the 100’ expanse of material to allow responders to “sweep” the
surface of the water or anchor it to a boom to catch oil in fast currents.
Product No.
Product Description
Type Weight Packaging Units/Skid
SP1800
19"x100' Oil Select Sweep.
Sweep 15 lbs.
1/Bag
36
ProSorbents Spill Sack
Prosorbents™ Spill Sacks are used to quickly deploy and capture fuel off water. The large
mesh size allows the oils to pass through much more efficiently. The red mesh bag and
the looped draw strings makes it easy to find and retrieve.
Other applications may include, boat docks and marinas, containment ponds, oil water
separators, catching drips and leaks, spill response and spill clean up.
Product No. Product Description
SPILSACK 25” x 14” x 5” Netted Draw String Pillow, Polypropylene fill. Pillow 20 lbs. 10 / Bale
16
Loose Polypropylene Pulp
ProSorbents Poly Pulp is used to quickly capture fuel oils where coverage is needed. By
using our oil only Poly Pulp, you will be able to cover a larger area much quicker than
using pads or sweep. Poly Pulp is environmentally friendly and will not effect the natural
wild life or its inhabitants.
Simple tools like a pool skimmer, can aid retrieving the oil saturated Poly Pulp.
Product No.
Product Description
SP10-25
25 lbs. of Polypropylene pulp
Loose
25”
1/Bag
18
Clean ‘B’ Oil Only Natural Sorbent
CleanB-sorbent is a unique blend of fibrous cellulose material designed as an ultra
efficient, nontoxic hydrocarbon absorbent.
Made entirely of organic materials and naturally occurring microbes, CleanB-sorbent is
not harmful to the environment, allowing in situ remediation.
With the ability to absorb up to 6 times its weight, CleanB-sorbent is the ideal product to
help contain, clean and remediate hazardous hydrocarbon spills.
Product No.
Product Description
Clean ‘B’
Clean ’B’ Oil Only Natural Bio-Remediation Sorbent
Loose
www.prosorbents.com
32
1/Bag
66
19
Oil Only Spill Kits
TSK Oil Only 5 gallon Spill Kit.
Zipper Vinyl Bag, absorbs up to 5 gallons.
Contents:
 15 - Heavy Weight Oil Only Pads,
 2- 3" x 48" Oil Only Socks
 1- Disposal Bag and Tie,
 1- Clear Zipper Vinyl Bag.
TSKY-O Oil Only 5 gallon Spill Kit.
Zipper Canvas / Vinyl Bag, absorbs up to 5 gallons.
Contents:
 15 - Heavy Weight Oil Only Pads,
 3- 3" x 48" Oil Only Socks
 1– Canvas Vinyl lined Zipper Bag, with looped straps.
SPK5-O Oil Only 5 gallon Spill Kit.
Bucket with screw on latch tight safety lid. UN 1H2/Y30/S
Contents:
 10– Heavy Weight Oil Only Pads,
 2- 3” x 48” Oil Only socks,
 2– 9” x 18” Oil Only pillows,
 1– pair of green nitrile gloves,
 1– goggle,
 1– disposal bag and tie.
 1- Black bucket with red latch tight safety lid..
DFLSK-O Oil Only 10 gallon ‘Camo Duffle’ Spill Kit.
Zipper Polyester Bag, absorbs up to 10 gallons.
Contents:
 25-Heavy Weight Oil Only pads,
 3-3” x 48” Oil Only socks,
 1-PND hole patch putty,
 1–goggles,
 1-Pair of green nitrile gloves,
 2 –Disposal bags and ties.
 Zipper Polyester Tote bag, PVC interior coating, Handles and
Shoulder Strap.
20
www.prosorbents.com
Oil Only Spill Kits
SPILL20-O Oil Only 20 gallon Spill Kit.
Yellow Lab pack with screw on lid. UN 1H2/X75/S
Contents:
 25–Heavy weight Oil Only pads
 4-3” x 48” Oil Only socks

2–9” x 18” Oil Only pillows,
 1–Pair of green nitrile gloves,
 1–ERG (Emergency Guide Book)
 1–Plug and Dyke
 1–Spill Kit Instruction Sheet
 1– Goggle,
 1– Disposal bag and tie.
SPILL30-O Oil Only 30 gallon Spill Kit.
Blue Polyethylene Drum with Lever lock lid. UN 1H2/Y123/08
Contents:
 50– Heavy weight Oil Only pads,
 1– Pair of green nitrile gloves,
 1– ERG (Emergency Guide Book)
 1– Plug and Dyke
 1– Spill Kit Instruction Sheet
 1– Goggle,
 4– Disposal bags and ties.
SPILL55-O Oil Only 55 gallon Spill kit.
Contents:
 50– Heavy Weight Oil Only pads,

6– 18” x 18” Oil Only pillows,

2– Pair of green nitrile gloves,
 1– ERG (Emergency Response Guide)
 2– Goggle,
Yellow Over Pack Drum with Screw top lid UN 1H2/Y123/08
Contents:
 2– 5” x 10’ Oil Only Boom,
 2– Goggle,
www.prosorbents.com
21
Oil Only Spill Kits
Contents:
 2– Goggle,
SPILL95-O-W Oil Only 95 gallon Wheeled Spill kit.
Contents:
 2– Goggle,
SPILL95-O-BC Oil Only Bunker ‘C’ 95 gallon Spill kit.
Contents:
 50– Heavy Weight Oil Only pads
 2– 5” x 10’ Oil Only Boom
 2– 18” x 18” Oil Only pillows
 2– 3” x 48” Oil Only Socks
 1– 5 gallon container of Banker ‘C’ solvent
 1- Disposable Coverall
 1– Pair of PVC gloves
 2– Pair of Goggles
 2– Chemical Apron
 1– Face Shield
 1– 32oz. Plastic scoop
 1– Non Sparking Shovel
 5– 3 mil Disposal Bags and Ties
22
www.prosorbents.com
Oil Only Spill Kits
SPILL950-7BP Oil Only 7 barrel, 1100 liter (291 gallons) Spill Clean Up Kit.
Note: Each kit consists of 4 —95 gallon drums.
Contents:
 900– 15” x 18” Heavy Weight Oil Only pads,

40 – 18” x 18” Oil Only pillows
 15— 5” x 10’ Oil Only Boom, with rings, snaps and
rope
 30— 3” x 48” Oil Only Socks
 5— Goggles

5– Pair of green nitrile gloves
 5—Tyvek QC Coveralls
 5– Wrap around shield and mask
 20– 3 mil disposal bags and ties
 2– 5 gallon plastic pails with screw top “Latch Safe”
lid. UN/DOT 1H2/Y30/S 1H2/XII.5/S
 2– 32 oz. plastic scoop
 1– Pump Transfer
SPILL950-12BP Oil Only 12 barrel, 1900 liter (501 gallons) Spill Clean Up Kit.
Note: Each kit consists of 5—95 gallon drums.
Contents:
 1000– 15” x 18” Heavy Weight Oil Only pads,

10 – 18” x 18” Oil Only pillows
 20— 5” x 10’ Oil Only Boom, with rings, snaps
and rope
 40— 3” x 48” Oil Only Socks
 5—19"x 100' Oil Only Sweep, reinforced strap,
spun bond one side
 5— Goggles
 5– Pair of green nitrile gloves
 5—Tyvek QC Coveralls
 5– Wrap around shield and mask
 20– 3 mil disposal bags and ties
 2– 5 gallon plastic pails with screw top “Latch
Safe” lid. UN/DOT 1H2/Y30/S 1H2/XII.5/S
 2– 32 oz. plastic scoop
 1– Pump Transfer
www.prosorbents.com
23
Universal Absorbent Melt Blown Pads and Rolls
The following products help compliance with, 29 CFR 1910.22(a)(2) - Floors in your workplace should be,
"maintained in a clean and, so far as possible, a dry condition."
Supply Pro-Fine Fiber™ technology is a
unique process that is used in our Technical and Medical Grade products. This
process is used in our absorbent products creating a highly absorbent and
strong fine fiber material.
Longer fiber length gives our pads higher tensile strength, more durability, and
greater absorbency than standard melt
blown pads.
Prosorbent Universal melt blown pads can be bonded or perforated and comes in various weights and sizes for job
specific requirements.











Dimple bonding gives added strength and durability.
Optional perforations gives the user the ability use the required sorbent material needed for the job.
Prosorbents™ Universal Sorbent Pads are perfect for spill control and spill cleanup.
Prosorbents™ pads offer you the greatest absorbency.
Perfect for larger spills.
The gray color hides the grime.
Universal Melt Blown Sorbent Pads
Product #
Product Description
Type Absorbency Packaging Units/Skid
23029
30" X 40" Heavy Weight King Dimpled Pad.
Pad
46.9 gallons
50/BALE
15
20129
15" X 18" Heavy Weight Dimpled Pad.
Pad
20 gallons
100/BALE
30
20127
15" X 18" Medium Weight Dimpled Pad.
Pad
16.4 gallons
100/BALE
40
24025
15" X 18" Light Weight Dimpled Pad.
Pad
24 gallons
200/BALE
30
Universal Melt Blown Sorbents Rolls
Product #
24
Product Description
Type Absorbency Packaging
Units/Skid
21229
36" X 144' Heavy Weight Center/Cross perf. Dimpled Roll.
Roll
31.4 gallons
1/BALE
18
25129
18" X 144' Heavy Weight Dimpled Split Roll.
Roll
31.4 gallons
2/BALE
18
21227
36" X 144' Medium Weight Center/Cross perf. Dimpled Roll.
Roll
19 gallons
1/BALE
18
25127
18" X 144' Medium Weight Dimpled Split Roll.
Roll
19 gallons
2/BALE
18
www.prosorbents.com
Universal SMS three layer Pads, Rolls and Drum Toppers
The following products help compliance with, 29 CFR 1910.22(a)(2) - Floors in your workplace should be,
"maintained in a clean and, so far as possible, a dry condition."
SMS (Spun bond /Melt blown /Spun bond) absorbents assure great
strength and absorption capabilities to address the most demanding of industrial applications, yet allows use around sensitive equipment and clean
rooms due to its non limiting construction.
SMS three layer absorbents are built by ultrasonically welding our melt

Three layer SMS can be used in non-linting situations to address the
capture of oil and water based fluids

Specially sonic-bonded three layer material to give added strength for
tough jobs and high traffic areas.

ProSorbents™ Fiber Technology is specifically designed to handle demanding tasks and large volume cleanups.


The two spun bond out layers gives great tensile strength and durability.


Three layer SMS Universal Absorbent Pads
Product No.
Product Description
Type Absorbency Packaging Units/Skid
40129
15" X 18" SMS Heavy Weight Universal Dimpled Pads.
Pad
20 gallons
100/bale
30
40127
15" X 18" SMS Medium Weight Universal Dimpled Pads
Pad
16.4 gallons
100/bale
40
Three layer SMS Universal Absorbent Rolls
Product No.
Type
Absorbency Packaging Units/Skid
41229
36" X 144' SMS Heavy Weight Center/Cross perforated Dimpled Roll.
Product Description
Roll
31.4 gallons
1/bale
18
45229
18" X 144' SMS Heavy Weight Dimpled Roll.
Roll
31.4 gallons
2/bale
18
41227
36" X 144' Medium Weight Center/Cross perforated Dimpled Roll.
Roll
19 gallons
1/bale
18
45227
18" X 144' Medium Weight Dimpled Roll.
Roll
19 gallons
2/bale
18
Three Layer SMS Universal Absorbent Drum Toppers
These pads keep drum tops clean and easy to maintain. Drum toppers are pre-cut with holes to fit bung holes on 55

Universal Three layer SMS is used to address the capture of oil and water
based fluids, and will not leave behind any fibrous residue.

Two pre-cut holes to accommodate 3/4" and 2" bungs to provide a perfect
fit on 55-gallon drum tops.

Catch pump drips and spills providing easy maintenance and clean up.

Three layer SMS sonic bonded construction will not tear or lint.
Product No
SPDT25-U
Product Description
24" dia. SMS Heavy Weight Universal Dimpled Drum Top.
www.prosorbents.com
Type Absorbency
Pad
8 gallons
Packaging
Units/Skid
25/BOX
80
25
Fine Fiber Universal Green and Gray three layer Pads and Rolls
The following products help compliance with, 29 CFR 1910.22(a)(2) - Floors in your workplace should be, "maintained in a clean and, so far as
possible, a dry condition."
Green Fine Fiber pads and rolls has been one of those unusual items that most people do not recognize as to the purpose.
However Green Fine Fiber pads has been used heavily across several markets that are looking for more
a environmental friendly look, the general public would recognize.
The purpose has been used from an aesthetic use, to specific applications such as toxic and aggressive
liquid spills, color coding disposal to avoid comingling to the use of the pads in retail and grocery store
spill clean ups.
Gray Fine Fiber pads and rolls has been recognize as your work horse sorbents. They work in the
exact some manner as all universal pads such as the yellow and green, however, the Gray seem to hide
the grime much better. And the gray is easily recognized by most as to the general purpose of the
product.
Unlike the single layer melt-blown universal pads, this product has three layers, low linting and captures more liquid than that of both the single layer universal and three layer SMS pads. The purpose of
this product is to give you more strength and absorbency than that of the single layer melt-blown pads.

Fine Fiber sorbents, are produced by sonic welding two sheets of Fine Fiber cover stock to the inner sorbent core of polypropylene melt-blown
sorbent.
Specially sonic-bonded three layer material to give added strength for tough jobs and high traffic areas.
ProSorbents™ Fiber Technology is specifically designed to handle demanding tasks and large volume cleanups.









Green Fine Fiber Universal Melt Blown Sorbent Pads
Product #
Type
Absorbency
FF20129G 15" X 18" Fine Fiber Green, Heavy Weight Dimpled Pad.
Product Description
Pad
20 gallons
100/BALE
30
FF20127G 15" X 18" Fine Fiber Green, Medium Weight Dimpled Pad.
Pad
16.4 gallons
100/BALE
40
FF24025G 15" X 18" Fine Fiber Green, Light Weight Dimpled Pad.
Pad
24 gallons
200/BALE
30
FF21229G 36" X 144' Fine Fiber Green, Heavy Weight Center/Cross perf. Dimpled Roll.
Roll
31.4 gallons
1/BALE
18
Gray Fine Fiber Universal Melt Blown Sorbent Pads
Product #
Product Description
Type
Absorbency Packaging Units/Skid
FF20129
15" X 18" Fine Fiber Gray, Heavy Weight Dimpled Pad.
Pad
20 gallons
100/BALE
30
FF20127
15" X 18" Fine Fiber Gray Medium Weight Dimpled Pad.
Pad
16.4 gallons
100/BALE
40
FF24025
15" X 18" Fine Fiber Gray Light Weight Dimpled Pad.
Pad
24 gallons
200/BALE
30
FF21229
36" X 144' Fine Fiber Green Heavy Weight Center/Cross perf. Dimpled Roll.
Roll
31.4 gallons
1/BALE
18
26
www.prosorbents.com
Universal Polypropylene Pillows and Socks
The following products help compliance with, 29 CFR 1910.22(a)(2) - Floors in your workplace should be, “maintained in a
Universal Polypropylene Netted Sorbent Boom
Primarily used to absorb all forms of liquids, including aggressive liquids such as acids and caustics. Prosorbent Universal
Boom acts as a barrier to prevent the spread of a spill while absorbing the liquid. Link together into barriers of any length
for containment and absorption. Manufactured using an outer net of polyester and an inner sock of spun bond polypropylene filled hydrophilic fiber.





Rope running along length of Boom adds strength for deployment and retrieval
Strong, zinc-plated carbon steel attachment clips and rings allow you to link Booms together for greater length
Universal Polypropylene fill is highly absorbent in absorbing all liquid spills including aggressive liquids such as acids and caustics in a variety of environments.
Tough outer mesh resists snags and debris while remaining pliable
Hugs ground and machinery to confine and soak up spills.
Product No.
Type
Weight
Packaging
Units/Skid
B510U
5" X 10' Universal Boom with Snaps, Rings and Rope.
Product Description
Boom
20 lbs.
4/Bale
24
B810U
8" X 10' Universal Boom with Snaps, Rings and Rope.
Boom
40 lbs.
4/Bale
16
Universal Polypropylene Pillows
Absorb all forms of spills from the mundane to the aggressive. Universal ProSorbents™ Pillows are tough enough to handle
all forms aggressive liquids such as; sulfuric acid, citric acids, bleach, and many other toxic liquids.
ProSorbents™ Pillows are great for placing into small, tight places while capturing high volumes of liquid from equipment
and fueling stations.






Pillows used in spill cleanup, can accelerate clean up.
Can be incinerated.
Easy to deploy and retrieve high capacity pillows during cleanup.
Small, flexible, compact size allows use in small cramped spaces without sacrificing performance.
Can handle aggressive liquids such as caustics and acids.
Product No.
Product Description
Type
Weight
Packaging
Units/Skid
SPIL1010U
10" X 10” X 2" Polypropylene Fill
Pillows
25 lbs.
40/Box
30
SPIL918U
9" X 18" X 2" Polypropylene Fill
Pillows
30 lbs.
40/Box
30
SPIL1818U
18" X 18" X 2"Polypropylene Fill
Pillows
20 lbs.
10/Box
21
Universal Polypropylene Socks
PROSORBENTS™ Universal Socks are available in four, eight and ten foot lengths. Also custom lengths are also available up on request. ProSorbents™ Universal Socks are filled with precise consistency lessening the likelihood of liquid leak
through point in the sock. ProSorbents™ Universal Socks absorb faster and exhibit great strength even under extreme
weight and vehicle traffic.
 Prosorbent™ Polypropylene Socks are flexible and can be molded into tight areas and around corners of equipment
that may leak.
 Sock used in spill containment creates a barrier to prevent spilled liquids from spreading.
 Can be incinerated.
 Polypropylene fill is highly absorbents and flexible.
Product No.
Type
Weight
SPS348U
3" X 48" Knit Sock, Polypropylene Fill.
Product Description
Socks
30 lbs.
30/BOX
18
SPS396U
3" X 96" Knit Sock, Polypropylene Fill .
Socks
40 lbs.
20/BOX
18
SPS3120U
3" X 120" Knit Sock, Polypropylene Fill .
Socks
40 lbs.
15/BOX
18
www.prosorbents.com
27
General Maintenance Socks, Pillows and Boom
The following products will help compliance with 29 CFR 1910.120(j)(1), 40 CFR 112.7(C)(1), 40 CFR
263.30(a), and 40 CFR 263.31.
General Maintenance sorbents are primarily used in the application of containing and absorbing oils, coolants, solvents, water and other non-aggressive liquids.
General Maintenance Recycled Cellulose Boom
Description: A highly absorbent General Maintenance Boom filled with cellulose fibers, incased with a
very strong, tear resistant polyester outer skin. The normal application is to contain and to absorb oils,
coolants, solvents, water and other non-aggressive liquids.
 Rope running along length of Boom adds strength for deployment and retrieval
 Strong, zinc-plated carbon steel attachment clips and rings allow you to link Booms together for
greater length
 Universal Cellulose fill is highly absorbent.
 Tough outer mesh resists snags and debris while remaining pliable
 Spun bond polypropylene skin is UV resistant up to 12 months; meets NFPA
99 standards for static decay
 Hugs ground and machinery to confine and soak up spills.
 Can be incinerated.
Product No.
Type
Weight
B510-WFG 5" X 10' General Maintenance Boom with Snaps, Rings and Rope.
Product Description
Boom
20 lbs.
4/Bale
24
B810-WFG 8" X 10' General Maintenance Boom with Snaps, Rings and Rope.
Boom
40 lbs.
4/Bale
16
General Maintenance Recycled Cellulose Socks
ProSorbents™ Universal Cellulose Socks absorbs non aggressive spills like fuel oils, coolants, water and other
liquids that are not aggressive in nature. When socks are used to contain a spill, the sock’s amazing capacity gives
the sock an attribute to “sit heavier” than other socks creating a dam, containing the spill.
The special blend of natural cellulose and polymers, allows greater capacity and you can actually watch the liquid
wick right into the sock as the sock starts to swell and expand taking in more and more liquid.
Product No.
SPS348-WFG
SPS396-WFG
SPS3120-WFG
SPS3144-WFG
Product Description
3" X 48" Knit Sock, Universal Recycled Cellulose & Polymer Fill
3" X 96" Knit Sock, Universal Recycled Cellulose & Polymer Fill .
Type
Socks
Socks
Socks
Socks
Weight
40 lbs.
40 lbs.
37 lbs.
40 lbs.
Packaging
30/BOX
20/BOX
15/BOX
10/BOX
Units/Skid
18
18
18
18
General Maintenance Recycled Cellulose Pillows
ProSorbents™ Universal Cellulose Pillows absorb non-aggressive spills like fuel oils, coolants, water and other liquids that
are not aggressive in nature.
The special blend of natural cellulose and polymers, allows greater efficiency and absorbency thus cutting down the amount of
time and resources needed to clean up the spills and contain leaks in the shop.
The 95% post consumer Natural Fiber meets most state recycle content initiatives.
Product No.
Product Description
SPIL1010-WGFG 10" X 10" X 2" Universal Recycled Cellulose & Polymer Fill
SPIL918-WFG
9" X 18" X 2" Universal Recycled Cellulose & Polymer Fill
SPIL1818-WFG 18" X 18" X 2" Universal Recycled Cellulose & Polymer Fill
28
www.prosorbents.com
Type
Pillows
Pillows
Pillows
Weight
30 lbs.
35 lbs.
20 lbs.
Packaging
40/Box
40/Box
10/Box
Units/Skid
30
30
21
Loose Particulates
The following products will help compliance with 29 CFR 1910.120(j)(1), 40 CFR 112.7(C)(1), 40 CFR
263.30(a), and 40 CFR 263.31.
Universal Cellulose Particulate Absorbents is a highly absorbent used to absorb and control liquid spills in industrial settings.
It is manufactured from recycled cellulose fiber and is non-selective
(universal) in what it absorbs. K-Sorb® is a non-carcinogenic, low dust alternative to clay based absorbents and diatomite. Universal Cellulose Particulate
is available in 22 lb. Bags.
5500001
22 lbs. Bag of Universal Particulate.
Universal
70 bags per pallet
Prosorb is a dry granular mineral that has the ability to absorb and retain many forms of liquids including acids and caustics. Prosorb can absorb up to 4 times its own weight., which is 8 times more than clay. Prosorb is a heavy weight absorbent used to penetrate the spill and stays
down in windy conditions.






PROSORB
Stays down in windy conditions.
Special Heavy formula to penetrate the spill.
Absorbs and attacks synthetic oil spills.
Aggressive wicking power.
NON-Carcinogenic and NON-Leaching
Natural color leaves no visible residue.
20lb. granular all purpose absorbent.
Universal
100 bags per pallet
A natural Mineral absorbent that exhibits strong encapsulating
and wicking properties.
Features:
 Can handle Aggressive liquids
 Land Fill Safe.
 Absorbs all liquids (except Hydrophlouric Acid)
 Used to broadcast greater coverage.
 Used to quickly absorb hydrocarbon spills.
 An All natural product.
 Made from Fullers Earth mineral.
CLAY2050-PL
50lb. granular all purpose absorbent clay.
www.prosorbents.com
Universal
50 bags per pallet
29
Universal Spill Kits
TSK-U Universal 5 gallon Truck Spill Kit.
Contents:
 15 - Heavy Weight Universal Pads,
 2- 3" x 48" Universal Socks
 1- Clear Zipper Vinyl Bag.
TSKY-U Universal 5 gallon Bag Spill Kit.
Zipper Canvas / Vinyl lined Bag, absorbs up to 5 gallons.
Contents:
 15 - Heavy Weight Universal Pads,
 3- 3" x 48" Universal Socks
 1– Canvas Vinyl lined Zipper Bag, with looped straps.
SPK5-U Universal 5 gallon Spill Kit.
Contents:
 10– Heavy Weight Universal pads,
 2- 3”x 48” Universal socks,
 2– 9” x 18” Universal pillows,
 1– goggle, 1– disposal bag and tie.
 1- Black bucket with red latch tight safety lid..
DFLSK-U Universal 10 gallon ‘Camo Duffle’ Spill Kit.
Contents:
 25-Heavy weight Universal pads,
 3-3” x 48” Universal socks,
 1-PND hole patch putty,
 1–Pair of chemical goggles,
 1-Pair of green nitrile gloves,
 2 –Disposal bags.
 Zipper Polyester Tote bag, PVC interior coating, Handles and strap.
30
www.prosorbents.com
Universal Spill Kits
SPILL20-U Universal 20 gallon Spill kit.
Contents:
 25–Heavy weight Universal pads,
 4-3” x 48” Universal socks,

2–9” x 18” Universal pillows,
 1–Pair of green nitrile gloves,
 1–ERG (Emergency Guide Book)
 1–Plug and Dyke
 1–Spill Kit Instruction Sheet
 1– Goggle,
 1– Disposal bag and tie.
SPILL30-U Universal 30 gallon Spill kit.
Contents:
 50– Heavy weight Universal pads,
 6- 3” x 48” Universal socks,
 4– 18” x 18” Universal pillows,
 1– ERG (Emergency Guide Book)
 1– Goggle,
SPILL55-U
Universal 55 gallon Spill kit.
Contents:
 12- 3”x 48” Universal socks,

6– 18” x 18” Universal pillows,

 2– Goggle,
SPILL95-U Universal 95 gallon Spill kit
Contents:
 4– 5”x 10’ Universal Boom,
 10– 18”x18” Universal pillows,
 2– goggle,
 10– disposal bags and ties.
www.prosorbents.com
31
Hazmat Pads and Rolls
Fine Fiber hazmat pads are designed to give extra absorbency while dealing with
aggressive liquids such as acids and caustics. The yellow alerts others of the intent and purpose of the pad, and it is fantastic item to use in high traffic areas to
alert others and help prevent slip and falls.
Outside of the typical industrial uses such as batteries, chemical plants and the
like, Use this pad in retail and grocery stores to alert the customers and employees of spill on the floors to help reduce costly incidents and accidents.
This Fine Fiber sorbent pad and roll has the same high quality three layer construction as the others, however, this is the one for the high visual cues you want
to give others to promote safety.














Specially bonded material to give added strength for tough jobs.
Absorbs all forms of liquid.
The yellow color alerts responders and disposal personnel of the special purpose.
Prosorbents™ Fine Fiber technology is specifically designed to handle demanding tasks and
large volume cleanups.
Fine Fiber sorbents, are produced by sonic welding two sheets of Fine Fiber cover stock to the inner sorbent core of
polypropylene melt-blown sorbent.
Specially sonic-bonded three layer material to
give added strength for tough jobs and high
traffic areas.
ProSorbents™ Fine Fiber Technology is specifically designed to handle demanding tasks
and large volume cleanups.
Can be wrung out and incinerated after use to
reduce waste.
Pads are ideal for catching drips and soaking
up spills.
Yellow Hazmat Fine Fiber Pads and Rolls
Product No.
Packaging
Units/Skid
FF20129Y
15" X 18" Heavy Weight Yellow Dimpled Haz-Mat pad.
Pad
20 gallons
100/BALE
30
FF21229Y
36"x144' Heavy Weight Yellow Dimpled Haz-Mat roll.
Roll
31.4 gallons
100/BALE
18
FF20127Y
15" X 18" Medium Weight Yellow Dimpled Haz-Mat pad.
Pad
20 gallons
100/BALE
30
FF21227Y
36"x144' Medium Weight Yellow Dimpled Haz-Mat roll.
Roll
31.4 gallons
100/BALE
18
32
Product Description
www.prosorbents.com
Type Absorbency
Hazmat Yellow Socks and Pillows
Highly absorbent pillows and socks filled with a universal yellow polypropylene fiber that is able to handle
aggressive liquids such as acids and caustics. The socks and pillows are also used in the protective packaging to ship hazardous material according to 49CFR and DOT regulations.
The bright yellow cover stock is an easy visible cue for “caution”, and should alert others and the user as
to exercise caution when dealing with possibly hazardous materials.
Also when used in conjunction with a structured spill response plan, the yellow color can signify the type
of liquid to be used with, and to be used to avoid commingling when disposing for the used sorbents.
For an example, the yellow can used to capture one type of aggressive liquid like Bleach, green used to capture Chlorine
and gray for Ammonia else that may not be react well with other captured liquids. Such as the yellow could capture Bleach and the
green sorbents capture Ammonia. You would not want to dispose of the sorbents in the same container, so a color coding system
would be used to state that yellow is to be dispose of in container one, and green in container two and gray in container three.

The socks are built with a tough outer skin of polyester knit, that allows quick absorption and solid performer as a damming
system.

The pillows are incased in a spun bond, non-linting cover stock used to clean up spills
large volume spills or placed in under machinery or filling stations.

The bright yellow alerts the user as to the purpose and proper disposal of the material.
It also alerts the user to avoid comingling

Absorbs and holds all liquids.

Can be incinerated.

Polypropylene fill is highly absorbent and flexible.

Easy to deploy and retrieve high capacity pillows during cleanup.

Small, flexible, compact size allows use in small cramped spaces without sacrificing performance

Absorbs the widest range of acids, bases and unknown liquids, even at high concentrations.
Yellow Hazmat Socks
Product No.
Product Description
Type
Weight
Packaging
Units/Skid
SPS348-Y
3" X 48" Yellow Polypropylene Fill Knit Sock.
Socks
32 lbs.
30/Box
18
SPS396-Y
Socks
32 lbs.
20/Box
18
SPS3120-Y
Socks
32 lbs.
15/Box
18
SPS3144-Y
Socks
32 lbs.
15/Box
18
Yellow Hazmat Pillows
Product No.
SPIL10-Y
Product Description
10" X 10" X 2" Yellow Polypropylene Fill, sonic welded seams.
Type
Pillows
Weight
30 lbs.
Packaging
40/Box
Units/Skid
21
SPIL918-Y
Pillows
30 lbs.
40/Box
30
SPIL1818-Y
Pillows
30 lbs.
12/Box
21
www.prosorbents.com
33
Hazardous Material Spill Kits
TSK-H Hazmat 5 gallon Spill Kit.
Contents:
 15 - Heavy Weight Hazmat Pads,



2- 3" x 48" Hazmat Socks
1- Disposal Bag and Tie,
1- Clear Zipper Vinyl Bag.
TSKY-H Hazmat 5 gallon Spill Kit.
Zipper Canvas / Vinyl Bag, absorbs up to 5 gallons.
Contents:
 15 - Heavy Weight Hazmat Pads,



3- 3" x 48" Hazmat Socks
1- Disposal Bag and Tie,
1– Canvas Vinyl lined Zipper Bag, with looped straps.
SPK5-H Hazmat 5 gallon Spill Kit.
Contents:
 10– Heavy Weight Hazmat pads,





2- 3”x 48” Hazmat socks,
2– 9” x 18” Hazmat pillows,
1– pair of green nitrile gloves,
1– goggle, 1– disposal bag and tie.
1- Black bucket with red latch tight safety lid..
DFLSK-H Hazmat 10 gallon ‘Camo Duffle’ Spill Kit.
Contents:
 25-Heavy weight Hazmat pads,






34
3-3” x 48” Hazmat socks,
1-PND hole patch putty,
1–Pair of chemical goggles,
1-Pair of green nitrile gloves,
2 –Disposal bags.
Zipper Polyester Tote bag, PVC interior coating, Handles and strap.
www.prosorbents.com
Hazardous Material Spill Kits
SPILL20-H Hazmat 20 gallon Spill kit.
Contents:
 25–Heavy weight Hazmat pads,








4-3” x 48” Hazmat socks,
2–9” x 18” Hazmat pillows,
1–Pair of green nitrile gloves,
1–ERG (Emergency Guide Book)
1–Plug and Dyke
1–Spill Kit Instruction Sheet
1– Goggle,
1– Disposal bag and tie.
Contents:
 50– Heavy weight Hazmat pads,








6- 3” x 48” Hazmat socks,
1– ERG (Emergency Guide Book)
1– Plug and Dyke
1– Spill Kit Instruction Sheet
1– Goggle,
4– Disposal bags and ties.
SPILL55-H
Hazmat 55 gallon Spill kit.
Contents:








12- 3”x 48” Hazmat socks,
1– ERG (Emergency Response Guide)
1– Plug and Dyke
2– Goggle,
5– Disposal bags and ties.
Contents:








4– 5”x 10’ Haz-Mat Boom,
10– 18”x18” Hazmat pillows,
2– pair of green nitrile gloves,
1– ERG (Emergency Response Guide)
1– Plug and Dyke
2– goggle,
10– disposal bags and ties.
www.prosorbents.com
35
Rail Mats
Pro Rail Mats are constructed of layers of highly absorbent
material sandwiched between a high strength needle punched
felt top layer and tacky black poly ground liner to prevent
bleed through.
The UV resistant material comes in 60" rolls to fit between the
rails and the 19" rolls are to fit on the outside of the rails.
These items can be used separately or in unison.
Although this product has been marketed for the Rail Roads in
particular, there are many other applications for which this
product can be used. This product has been used on warehouse
floors, forklift traffic, foot traffic in plants, foot traffic at oil
spills, fuel depots, construction sites, and the list goes on.
Product No.
RAILMAT-60
RAILMAT-19
Product Description
Rail road mat 60” x 100’ Oil only mat
Rail road mat 19” x 100’ Oil only mat
Type
Boom
Boom
Attribute
Weight
45 lbs.
27 lbs.
Packaging
1 /Bale
2 /Bale
Units/Skid
18
18
ASTM
MD
CD
Typical
Weight, oz./yd²
D3776-96
—
—
19.0
Tensile Strength (grab), lbs. per foot
D5034-95
148.0
207.8
Tensile Strength (stretch), lbs. per foot
D5035-95
46.6
65.8
Tensile Strength (Trapezoidal), lbs. per foot
D1117-97
117.3
153.9
Elongation, %
D5035-95
1.8
2.1
Ball Burst, lb. per foot
D3787-89
—
—
Absorbency Rate mL / sq. ft.
Time in seconds to absorb
300.7
5 ml
15 mL
20mL
25 mL
30 mL
30
60
120
150
180
Regulations and Compliance
40 CFR 112.7 - SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters of the United States.
40 CFR 122.26 - When applying for a National Pollutant Discharge Elimination System (NPDES) permit, facilities must have a plan in place that
describes actions, procedures, control techniques, management practices and equipment available to prevent illegal discharge of pollutants into
waterways.
40 CFR 263.30(a) - In the event of a spill, transporters must, "take appropriate immediate action to protect human health and the environment."
40 CFR 263.31 - Transporters, "must clean up any hazardous waste discharge that occurs during transportation…so that the hazardous waste discharge no longer presents a hazard to human health or the environment."
36
www.prosorbents.com
Industrial Rugs
29 CFR 1910.107(b)(3)
29 CFR 1910.107(g)(2)
29 CFR 1910.22(a)(2)
- If floors in a spray booth or work area are combustible, they "shall be covered with noncombustible material of such
character as to facilitate the safe cleaning and removal of residues."
- OSHA requires spraying areas to be "kept as free from the accumulation of deposits of combustible residues as practical."
- Floors in your workplace should be, "maintained in a clean and, so far as possible, a dry condition."
This process allows the production of “optimized” needle punch products. As strong as the industry standard but with added absorbency, they are constructed from a single layer of synthetic fibers that are then heavily needle-punched and heat-set.
Added fire retardant and chemical additives significantly boost absorbency. All our needle punch is tough enough to withstand forklift and foot traffic. Its charcoal color hides the dirt much longer than the typical black needle punch products currently available so it
can stay on the job longer.

100% polypropylene material is heat fused and needle punched for incredible durability
for walk-on and wheeled traffic

Our most durable mat won't rip, shred or fray, even under heavy forklift traffic!

Absorbs and retains oils, coolants, solvents and water

Dark gray color hides grime, so mat stays on the job longer

Rolls are ideal for walkways and large areas to soak up leaks and overspray

Cuts easily with scissors or utility knife

Can be incinerated after use to reduce waste or for fuels blending
Item #
Description
Units per Pallet
SPIR150
36″ x 150′ Poly backed , needle punch synthetic fiber roll
1 Roll per bale / 20 per pallet
SPIR300
36″ x 300′ Needle punch , light weight synthetic fiber roll
1 Roll per bale / 20 per pallet
www.prosorbents.com
37
Spill Containment Berms
The compact size and portability also makes it ideal to provide
sturdy spill response at jobsites for leaking tanks, vehicles,
equipment and machinery helping to keep you in compliance
for short or long term while keeping expense reasonable.
Spill Containment Berm are ideal for Spill Prevention, Control, and Countermeasure (SPCC)
and Storm Water Pollution Prevention Plan (SWPPP) requirements.
This product essentially prevents hazardous liquids from spreading, saving the user money by
avoiding costly fines and clean ups.
Item #
Description
BRM004
4’ X 4’ 40ml LLDPE Berm w/ 8 brackets
BRM005
BRM006
BRM007
BRM008
BRM009
BRM010
BRM02
BRM003
BRM019PD
12’ x 12’ Berm Pad 12 oz., protection of the berm liner, from sharp objects.
BRM020PD
BRM021PD
BRM013TG
36” Track Guard. Protection of the berm liner from wheeled containers. Cut to length.
BRM015TG
72” Track Guard. Protection of the berm liner from wheeled containers. Cut to length.
For custom sizes please call for availability and pricing.
EPA 40 CFR 264.175:
Containment. (a) Container stor age ar eas must have a containment system that is designed and oper ated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows:
(3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of
the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination.
38
www.prosorbents.com
Drum Liners, End dump liners and Poly Sheeting
High volume purchasing equates to buying power in the commodities market, and we pass the
savings on to our customers. Supply Pro has always, and will continue to set the mark when it
comes to competitive pricing on poly bags and poly sheeting.
Drum Liners
Easy Slide roll off box and end dump liners are manufactured with durable low density polyethylene. Slip and anti-block
additives ensure easy slide performance. Stop wasting time at the dump and keep your drivers on the road .
Part Number
Bags / Roll
Weight
Rolls / Pallet
38” x 60” x 6 mil Clear LDPE
50
41.04 lbs.
30
HH3863.3-100
38” x 63” Super Strength – (replaces 4 mil LDPE)
100
31.92 lbs.
30
HH3863.6
50
31.92 lbs.
30
RB3863.3Y
50
23.94 lbs.
30
RB3863.6Y
25
23.94 lbs.
30
L216-PLAIN
Description
Roll Off Box & End Dump Liners
Easy Slide roll off box and end dump liners are manufactured with durable low density polyethylene. Slip and anti-block
additives ensure easy slide performance. Stop wasting time at the dump and keep your drivers on the road .
Part Number
Description
Liners / Pallet
TL2050.3B
End Dump Trailer Liner - 20’ x 50’ x 3 mil (Black)
50
TL1842.3B
End Dump Trailer Liner - 18’ x 42’ x 3 mil (Black)
75
TL2030.3B
Flat Roll Off Box Liner (20 & 30 CY) - 20’ x 30’ x 3 mil (Black)
75
Fitted Roll Off Box Liner (20 & 30 CY) - 8’ x 8’ x 22’ x 3 mil (Black)
75
RL22
Poly Sheeting (Construction Film)
PS series is our top shelf poly sheeting in various widths, thicknesses and your choice in clear or black.
Part Number
Description
Weight
Rolls/Pallet
PS3-20
Poly Sheeting (Clear) 20’ x 100’ x 3 mil
28.8 lbs.
30
PS3-20B
Poly Sheeting (Black) 20’ x 100’ x 3 mil
28.8 lbs.
30
PS4-20
38.4 lbs.
30
PS4-20B
38.4 lbs.
30
PS6-20
57.6 lbs.
25
PS6-20B
57.6 lbs.
25
www.prosorbents.com
39
40
www.prosorbents.com

Oil Only Spill Kits

Transcription

Similar documents

spill briefly

designed to ease and quicken the chore of feeding round bales of hay

Sound Pads

OR / Surgery Table Pads

The 2014 Wall Calendar Program

Feline Plasma Cell Pododermatitis

ACTION® OrIgINAl TAble PAds - Action Products Action Products

Installing Brake Pads

SunDog School of Natural Building 4 week Balecob Workshop on