U10 - Star Trac Support

Transcription

U10 - Star Trac Support
1.
2.
3.
4.
ITEM
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
000-6207
000-6244
000-6264
000-6324
001-0391
001-0424
001-0458
01-1121
01-4034
01-4036
01-4064
01-4094
01-4113
01-4126
001-6347
001-6365
02-3058
02-3062
02-4130
02-4174
02-4177
02-9220
02-9307
03-1035
03-3043
03-4031
03-4034
03-4036
03-9080
04-2021
04-5213
05-5130
08-5186
08-7057
09-1224
09-8080
09-9997
10-2035
12-1151
12-1380
12-1822
12-6180
12-6308
12-7500
12-8005
19-1013
19-1043
Default Top
Level/QTY.
2
1
1
1
1
1
1
1
2
2
2
1
2
2
1
2
4
8
2
4
4
1
4
3
1
6
6
5
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
19-6000
56-0584
56-0585
56-0587
57-0350
57-0355
57-0373
57-0376
57-0388
57-0389
57-0391
57-0465
57-0469
57-0478
57-0479
57-0482
57-0485
57-0487
57-0497
57-0507
57-0536
57-0537
1
2
2
1
57
1
1
1
1
1
2
1
1
1
1
1
1
1
4
1
1
1
All labeled components are to be assembled
before shipment unless otherwise noted.
All bearings are to be pressed in with force
applied to outer ring only.
All hardware to be torqued to specs listed in
chart below.
Special notes if any are shown below.
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Field Service Requests: [email protected]
GSA Parts Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
www.medfitsystems.com
DESCRIPTION
END CAP
ISIS TRUVATIV 118MM X 160MM BB
SEAT, MED WIDTH
CRANK ARM LEFT HAND
CRANK ARM RIGHT HAND
WATER BOTTLE HOLDER
DECAL, WARNING, U/R916
Default 3/8 -16 UNC x 2 Bolt
ITEM PART NO.
Top
BOLT BH , 8-32 x 1¾'' ZINC
Level/QTY.
BOLT BH , 3/8 -16 x ¾'' ZINC
70
57-0538
1
BOLT BH 3/8-16 X 2" ZINC
BOLT BH, 5/16 -18 UNC x 2¼'' - ZINC
71
57-0541
1
Button HD Joint Connector, 3/8-16 X 1.06
72
57-0542
1
73
57-0545
2
BOLT BH ,¼ -20 x ½'' SS BLACK
74
57-0546
2
KEYPANEL, OVERLAY, RIGHT
75
57-0547
4
DISC, CRANK
76
57-0554
1
SCREW #8-32 X 1 PHIL PAN HEAD ZINC
77
57-0562
1
#6 -32 UNC THREAD x 1" OVAL HEAD PHILLIPS
M/S _SS-BLACK OXIDE
78
57-0563
1
SCREW, SET, ¼ -20 UNC x ½
79
57-0566
1
SCREW SHCS , ¼ -20 UNC x ½ Zinc
80
57-0567
1
SCREW SHCS , 3/8 -16 UNC x 1 Zinc
81
57-0568
1
3/8 -16 UNC x 1¼ Bolt
82
57-0574
1
SCREW, M6-1.0 X 20mm L, SHCS, STAINLESS
83
57-0608
1
3/8" Lock Nut
84
57-0611
1
5/16" Lock Nut
85
57-0648
1
8-32 INSERT HEX
86
70-1208
1
10-32 INSERT HEX
87
71-1203
1
RIVNUT 10-32 NF, .130-.225
88
72-1213B
1
M8-1.0 Hex Fin Jam Nut
89
75-1205
1
WASHER, FLAT, 3/8" USS
90
75-1207
1
3/8" Internal Loc Washer
91
75-1208
1
IGUS FLANGE .5 ID x .5938 OD x .25L
92
91-999
1
SPACER NYLON 5/8 DIA X 1/2 L
93
95-0614 L
1
TENSIONER PULLEY BUSHING U10
94
95-0614 R
1
GRIP ASSEMBLY HYD SEAT ADJUSTMENT
95
95-9004
1
TYRAP, .14 X 11.0
96
899-0004
1
Pulley 2", Crowned, Flangeless
902-4707
4
97
COMPRESSION SPRING (Stainless Steel)
98
902-5681
7
DECAL SEAT ADJUSTMENT 1-13 R10
99
27592
3
Made In USA
Honix Console Decal
100
40654
9
Decal, Parts Diagram Schematic U10
101 SM000-6218
1
Membrane Switch Overlay for Honix Display
102 SM001-6348
1
MPale Antimicrobial Label
103 SM002-0540
2
DECAL SEAT ADJUSTMENT 1-4 U10
104 SM13180
4
TAPE DBL SIDED 2 3/4" WIDE
105 SM17686
4
U10 Quick Assembly Instructions (Hardcopy
106 SM17787
2
Printed)
107 SM17815
2
DVD Technical Documentation
108 SM21607
2
Wheel (56-0580 Drilled Out to .641 ID)
109 SM22214
1
Wheel Sleeve (for 56-0584)
4
SPRING GAS LOCKING IN COMPRESSION 100N 110 SM27579
111 SM40235
1
Power Adaptor, 15VDC, 4A
112 SM40236
1
BATTERY 12V 1.3 Ah
113 SM40760
1
PULLEY 8 GROOVE 11 3/4" DIA
114 SM40761
1
DC BLOWER FAN ASSEMBLY
115 SM41269
1
Seat Slide Cap 1 ½ x 3 Rect
Seat Slide guide 1 ½ x 3 Rect
BUSHING SEAT SHOCK MOUNT
H10 Console ATSC DOM TV KIT 10"
CABLE POWER INPUT E10, U10
Assembly Cable Contact Heart Rate
BELT J Groove 8 Rib 63" / Drive belt U10
Eddy Brake/Gen with clutch (FB62HA21)
Lower Control Board, BLCB011
BRACKET POWER INLET
SPACER, #10 SCREW, 5/16"
Board Interface to Lower Control
TV Cable Assembly, E/U/R 10 Series
CABLE ASSY, T-BAR GRIP TO CONSOLE, RoHS
DESCRIPTION
ASSEMBLY FAN INPUT POWER CABLE R10, U10
U10 MAIN SHROUD, LEFT
U10 MAIN SHROUD, RIGHT
GRIP CHR /ROC TOP ASSEMBLY
GRIP CHR TOP ASSEMBLY
GRIP CHR BOTTOM ASSEMBLY
CABLE, Console to LCB, R10, U10
CABLE, Intermediate Board to BCLB002, E10,
U10, R10
CABLE, Intermediate Board to BCLB002
SEAT LOCKING HEX NUT
SEAT LOCKING STOP PLATE
NYLON SEAT LOCK
Handle with 3/8"-16 Threaded Stud
I-POD MOUNT
Pocket, Peel & Stick, Cardio Schematic
Fenner Tensioner RT1001
ASSEMBLY, FRAME U10 BIKE
Weldment Front Display Mast U10 Bike
SEAT RELEASE GRIP HANDLE
Weldment Seat Adjustment Vertical
SEAT MOUNT SLIDE ASSEMBLY
Seat Slide Housing Bracket
Paint (1.5 lbs)
PEDAL EXERCISER JD-48-A 9-16 LEFT
PEDAL EXERCISER JD48-A 9/16 RIGHT
Packaging Kit Estimate U10
DECAL SERIAL/COMPLIANCE U9/U10
SCREW SHCS, M6-1.0 X 10, SHCS, BLACK,
EPOXY
SCW-SHCS M8-1.25x25 SS
WASHER, M8, SPLIT LOCK
SCREW, #10-32 X .75, PAN HEAD, W/LOCK
WASHER
ASSEMBLY, HANDLEBAR
KEYPANEL, OVERLAY, LEFT
PCB, CHR INTER-CONNECT
CAP, LEVELING SUPPORT
PAD, LEVELING
CONNECTOR, RF, 3MM, F
Alloy Steel Black Finish
TAPE, DOUBLE SIDED, FOAM
WASHER, FLAT, 5/16" SAE ROHS
WASHER, M6, FLAT, ZINC PLATED
FASTENER, HOOK
FASTENER, HOOK
LABEL, SWING ARM, WIRE, RH
LABEL, SWING ARM, WIRE, LH
Grommet, 2879, 7/8" ID
U10 Upright Bike
U10
REV P
1.
Red: PAINTED ITEMS
Blue: KITS
75-1208
Teflon Paint
(Shadow Bronze)
57-0566
Zinc Plated
2.
75-1207
Zinc Plated
72-1213B
Teflon Paint
(Shadow Bronze)
3.
4.
All labeled components are to be assembled
before shipment unless otherwise noted.
All bearings are to be pressed in with force
applied to outer ring only.
All hardware to be torqued to specs listed in
chart below.
Special notes if any are shown below.
75-1205
Zinc Plated
000-6324
Silver Paint
70-1208
57-0608
001-0391
Silver Paint
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Field Service Requests: [email protected]
GSA Parts Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
www.medfitsystems.com
71-1203
U10 Upright Bike
U10
REV P
1.
2.
3.
000-6264
Red: PAINTED ITEMS
Blue: KITS
72-1213B
Teflon Paint
(Shadow Bronze)
02-4130 X 2
(see detail)
75-1207
Zinc Plated
4.
05-5130 x 2
All labeled components are to be assembled
before shipment unless otherwise noted.
All bearings are to be pressed in with force
applied to outer ring only.
All hardware to be torqued to specs listed in
chart below.
Special notes if any are shown below.
09-1224
10-2035
27592 x 3
03-9080
12-8005
902-5681 x 3
01-4036 x 2
57-0568
12-1151
57-0567
40654 x 3
08-5186
57-0566
Zinc Plated
03-4036 x 3
12-1151
57-0574
75-1208
Teflon Paint
(Shadow Bronze)
01-4094
57-0391 x 2
57-0388
03-4036 x 2
01-4113 x 2
SM22214
Note 02-4130:
1. Add(Blue)Loctite 242
to threads.
2. Thread set screws in place
leaving 1/8" threads exposed
to stop travel of seat.
57-0389
75-1205
Zinc Plated
SM17815 x 2
56-0587
03-3043
57-0391 x 2
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Warranty Field Service Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
www.medfitsystems.com
03-3043
01-4094
SM22214
U10 Upright Bike
U10
REV P
57-0465 (Shown)
57-0470 (Optional)
57-0393 (Optional)
Red: PAINTED ITEMS
Blue: KITS
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Warranty Field Service Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
H10 Console ATSC DOM TV KIT 10"
H10 Console DVB-T TV KIT 10"
H10 Console Kit 7"
www.medfitsystems.com
57-0465
12-6308
57-0465
57-0608
57-0465
57-0465
57-0465
71-1203
01-4126
001-0458
02-4177 X 4
01-4126
57-0465
57-0381
12-1380
902-5681 X 4
12-7500
001-0424
03-4034 X 3
40654 X 3
1.
2.
3.
4.
All labeled components are to be assembled
before shipment unless otherwise noted.
All bearings are to be pressed in with force
applied to outer ring only.
All hardware to be torqued to specs listed in
chart below.
Special notes if any are shown below.
U10 Upright Bike
U10
REV P
LH- "LOCK/QUICK START
SM002-0540
Red: PAINTED ITEMS
Blue: KITS
SM21607
000-6207
SM001-6348
02-3062 x 2
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Warranty Field Service Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
RH- "LEVEL UP/DOWN
www.medfitsystems.com
02-3062 x 2
57-0547
57-0545
SM002-0540
SM21607
001-6347
57-0547
SM000-6218
57-0545
57-0546
57-0547
1.
2.
3.
4.
All labeled components are to be assembled
before shipment unless otherwise noted.
All bearings are to be pressed in with force
applied to outer ring only.
All hardware to be torqued to specs listed in
chart below.
Special notes if any are shown below.
02-3062 x 4
U10 Upright Bike
U10
REV P
1.
2.
3.
Red: PAINTED ITEMS
Blue: KITS
4.
All labeled components are to be assembled
before shipment unless otherwise noted.
000-6324
All bearings are to be pressed in with force
Silver
Paint
applied to outer ring only.
All hardware to be torqued to specs listed in
To Install: This side has Left Hand Threads. Tighten using a purchased "AM BB
chart below.
ISIS DRIVE Tool" turning Hub Counter clockwise until flange Face is
Special notes if any are shown below.
completely flush with bike frame hub. Use "LOCTITE 243 BLUE" while installing
for thread locking.
To Remove: use "AM BB ISIS DRIVE Tool" and turn clockwise to loosen threads.
Note: This may take some pressure
due to thread locking material used previously.
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Warranty Field Service Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
www.medfitsystems.com
95-0614 L
000-6244
To Install:
1) Install and Tighten clockwise using "AM BB ISIS DRIVE Tool"
with "LOCTITE 243 BLUE" until bearing cup is secure.
2) Add outer Jam Nut ring secure with Flat faced screw driver.
902-4707 x 4
Locate Molded Plastic
Lip outward towards
000-6324
To Remove:
1) Loosen jam ring (turning counter clockwise) with screw driver in
one of the slots.
2) Use "AM BB ISIS DRIVE Tool" and turn counter clockwise to loosen
threads. Note: This may take some pressure to loosen due to working
loose the current thread lock solution.
000-6244
001-6365
000-6244
Locate Molded Plastic
Lip outward towards
001-0391
Jam Nut
000-6244
02-9307 x 4
001-0391
Silver Paint
SM27579 x 4
57-0373
000-6244
001-6365
To Install Bolt: Tighten Bolt securely by applying
approximately 40ft/lbs of torque.
To Remove: loosen bolt using "Crank Puller" for bolt
Use Pedal Wrench such as "Park Tool PW3" available at your local Bike Shop for
Loosening Pedals
95-0614 R
001-6244 - ISIS 118 L EXERCISE BOTTOM
BRACKET INSTALL/ REMOVAL DETAILS
U10 Upright Bike
U10
REV P
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Warranty Field Service Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
02-9220
www.medfitsystems.com
Red: PAINTED ITEMS
Blue: KITS
57-0648
08-7057
09-9997
04-2021
01-1121
02-4174 X 4
04-5213
03-1035
57-0482
Note: Belt Tension 80-100 lbs.
57-0648
09-9997
57-0482
57-0373
57-0479
1.
2.
3.
4.
All labeled components are to be assembled
before shipment unless otherwise noted.
All bearings are to be pressed in with force
applied to outer ring only.
All hardware to be torqued to specs listed in
chart below.
Special notes if any are shown below.
02-4174 X 4
INSTALL BELT UNDERNEATH
PULLEY ASSEMBLY. Rotate large
Hex nut on Tensioner to 3 1/2 lines CW. Then
lock down hex head bolt on back side
of frame while holding tension on tensioner.
U10 Upright Bike
U10
REV P
1.
2.
3.
12-5621
Red: PAINTED ITEMS
Blue: KITS
40654 x 13
901-5496 x 2
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Warranty Field Service Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
4.
All labeled components are to be assembled
before shipment unless otherwise noted.
All bearings are to be pressed in with force
applied to outer ring only.
All hardware to be torqued to specs listed in
chart below.
Special notes if any are shown below.
57-0556 - Black
000-6259 - Dk Grey
www.medfitsystems.com
57-0541 - Black
000-6251 - Gray
12-6304
12-6180
57-0611
SM13180 x 4
57-0542- Black
000-6252 - Gray
12-5621
SM17686 x 4
57-0557 - Black
000-6260 - Dk Gray
899-0004
SM17787
03-4036 x 3
57-0487
57-0555 - Black
000-6257 - Dk Gray
40654 x 2
01-4064
x2
56-0585
x2
12-6305
12-7501
03-1035
x2
56-0584
x2
40654 x 3
U10 Upright Bike
U10
REV P
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Warranty Field Service Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
www.medfitsystems.com
Red: PAINTED ITEMS
Blue: KITS
1.
2.
3.
4.
57-0554
All labeled components are to be assembled
before shipment unless otherwise noted.
All bearings are to be pressed in with force
applied to outer ring only.
All hardware to be torqued to specs listed in
chart below.
Special notes if any are shown below.
19-1043
57-0350
12-6180
57-0536
57-0478 x 2
19-6000
57-0537
19-1013
57-0469
57-0507
57-0562
57-0563
02-3058 x 4
SM40760
57-0538
SM40761
SM17787
57-0350-05 (Australian)
57-0350-04 (United Kingdom)
57-0350-03 (Switzerland)
SM41269
57-0497 x 4
03-4031 x 4
57-0350-02 (Europe)
57-0350-01 (North America)
03-4031 x 2
57-0376
01-4034 x 2
57-0355
09-8080
SM40236
SM40235
40654 x 3
57-0485
03-4034 x 3
U10 Upright Bike
U10
REV P
SM002-0540 x 2
SM21607 x 2
000-6207
000-6244
000-6264
000-6324
001-0391
001-0424
001-0458
01-4113
01-4126
001-6347
001-6365
02-3058
Default - Top
Level/QTY.
2
1
1
1
1
1
1
2
9
1
2
4
02-3062
8
02-4130
02-4174
02-9220
02-9307
03-3043
03-4031
03-4034
03-4036
04-5213
05-5130
08-5186
08-7057
09-1224
09-8080
09-9997
10-2035
12-1151
12-1380
12-1822
12-6180
12-6308
12-7500
12-8005
19-1013
19-1043
2
10
2
4
5
6
6
5
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
19-6000
56-0584
56-0585
56-0587
57-0350
57-0355
57-0373
57-0376
57-0388
57-0389
57-0391
57-0465
57-0469
57-0478
57-0479
57-0482
57-0485
57-0487
57-0497
57-0507
57-0536
57-0537
57-0538
57-0541
57-0542
57-0545
57-0546
57-0547
57-0554
1
2
2
1
57
1
1
1
1
1
2
1
1
1
1
1
1
1
4
1
1
1
1
1
1
2
2
4
1
57-0562
1
57-0563
57-0566
57-0567
57-0568
57-0574
57-0608
57-0611
57-0648
70-1208
71-1203
72-1213B
75-1205
75-1207
75-1208
91-999
95-0614 L
95-0614 R
95-9004
899-0004
902-4707
902-5681
27592
40654
SM000-6218
SM001-6348
SM002-0540
SM13180
SM17686
SM17787
SM21607
SM22214
SM27579
SM40235
SM40236
SM40760
SM40761
SM41269
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
7
3
9
1
1
2
4
4
2
2
2
4
1
1
1
1
1
PART NO.
12-6180
REV P
DESCRIPTION
END CAP
ISIS TRUVATIV 118MM X 160MM BB
SEAT, MED WIDTH
CRANK ARM LEFT HAND
CRANK ARM RIGHT HAND
WATER BOTTLE HOLDER
DECAL, WARNING, U/R916
Button HD Joint Connector, 3/8-16 X 1.06
BOLT BH ,¼ -20 x ½'' SS BLACK
KEYPANEL, OVERLAY, RIGHT
DISC, CRANK
SCREW #8-32 X 1 PHIL PAN HEAD ZINC
#6 -32 UNC THREAD x 1" OVAL HEAD PHILLIPS M/S
_SS-BLACK OXIDE
SCREW, SET, ¼ -20 UNC x ½
SCREW SHCS , ¼ -20 UNC x ½ Zinc
3/8 -16 UNC x 1¼ Bolt
SCREW, M6-1.0 X 20mm L, SHCS, STAINLESS
5/16" Lock Nut
8-32 INSERT HEX
10-32 INSERT HEX
RIVNUT 10-32 NF, .130-.225
3/8" Internal Loc Washer
IGUS FLANGE .5 ID x .5938 OD x .25L
SPACER NYLON 5/8 DIA X 1/2 L
TENSIONER PULLEY BUSHING U10
GRIP ASSEMBLY HYD SEAT ADJUSTMENT
TYRAP, .14 X 11.0
Pulley 2", Crowned, Flangeless
COMPRESSION SPRING (Stainless Steel)
DECAL SEAT ADJUSTMENT 1-13 R10
Made In USA
Honix Console Decal
Decal, Parts Diagram Schematic U10
Membrane Switch Overlay for Honix Display
MPale Antimicrobial Label
DECAL SEAT ADJUSTMENT 1-4 U10
TAPE DBL SIDED 2 3/4" WIDE
U10 Quick Assembly Instructions (Hardcopy Printed)
DVD Technical Documentation
Wheel (56-0580 Drilled Out to .641 ID)
Wheel Sleeve (for 56-0584)
SPRING GAS LOCKING IN COMPRESSION 100N
Power Adaptor, 15VDC, 4A
BATTERY 12V 1.3 Ah
PULLEY 8 GROOVE 11 3/4" DIA
DC BLOWER FAN ASSEMBLY
Seat Slide Cap 1 ½ x 3 Rect
Seat Slide guide 1 ½ x 3 Rect
BUSHING SEAT SHOCK MOUNT
H10 Console ATSC DOM TV KIT 10"
CABLE POWER INPUT E10, U10
Assembly Cable Contact Heart Rate
BELT J Groove 8 Rib 63" / Drive belt U10
Eddy Brake/Gen with clutch (FB62HA21)
Lower Control Board, BLCB011
BRACKET POWER INLET
SPACER, #10 SCREW, 5/16"
Board Interface to Lower Control
TV Cable Assembly, E/U/R 10 Series
CABLE ASSY, T-BAR GRIP TO CONSOLE, RoHS
ASSEMBLY FAN INPUT POWER CABLE R10, U10
U10 MAIN SHROUD, LEFT
U10 MAIN SHROUD, RIGHT
GRIP CHR /ROC TOP ASSEMBLY
GRIP CHR TOP ASSEMBLY
GRIP CHR BOTTOM ASSEMBLY
CABLE, Console to LCB, R10, U10
CABLE, Intermediate Board to BCLB002, E10, U10,
R10
CABLE, Intermediate Board to BCLB002
SEAT LOCKING HEX NUT
SEAT LOCKING STOP PLATE
NYLON SEAT LOCK
Handle with 3/8"-16 Threaded Stud
I-POD MOUNT
Pocket, Peel & Stick, Cardio Schematic
Fenner Tensioner RT1001
ASSEMBLY, FRAME U10 BIKE
Weldment Front Display Mast U10 Bike
SEAT RELEASE GRIP HANDLE
Weldment Seat Adjustment Vertical
SEAT MOUNT SLIDE ASSEMBLY
Seat Slide Housing Bracket
Paint (1.5 lbs)
PEDAL EXERCISER JD-48-A 9-16 LEFT
PEDAL EXERCISER JD48-A 9/16 RIGHT
Packaging Kit Estimate U10
DECAL SERIAL/COMPLIANCE U9/U10
SCREW SHCS, M6-1.0 X 10, SHCS, BLACK, EPOXY
SCW-SHCS M8-1.25x25 SS
WASHER, M8, SPLIT LOCK
SCREW, #10-32 X .75, PAN HEAD, W/LOCK WASHER
ASSEMBLY, HANDLEBAR
KEYPANEL, OVERLAY, LEFT
PCB, CHR INTER-CONNECT
CAP, LEVELING SUPPORT
PAD, LEVELING
CONNECTOR, RF, 3MM, F
TAPE, DOUBLE SIDED, FOAM
WASHER, FLAT, 5/16" SAE ROHS
WASHER, M6, FLAT, ZINC PLATED
FASTENER, HOOK
FASTENER, HOOK
LABEL, SWING ARM, WIRE, RH
LABEL, SWING ARM, WIRE, LH
Grommet, 2879, 7/8" ID
02-3062 x 2
000-6207
SM40236
SM40235
57-0507 19-1013
02-3058 x 4
SM000-6218
02-3062 x 2
SM001-6348
57-0545
57-0547
57-0497 x 4
03-4031 x 4
03-4031 x 2
57-0376
57-0547
57-0545
001-6347
57-0546
57-0465
57-0547
40654 x 3
57-0485
03-4034 x 3
01-4034 x 2
57-0465
02-3062 x 4
09-8080
SM41269
57-0355
57-0648
04-2021
01-1121
09-9997
08-7057
57-0465
57-0465
01-4126
01-4126
57-0465 57-0381
12-1380
12-7500
57-0479
27592 x 3
902-5681 x 3
40654 x 3
57-0568
57-0567
03-4036 x 3
08-5186
57-0566
Zinc Plated
57-0574
01-4113 x 2
01-4094
SM22214
57-0391 x 2
000-6244
000-6244
57-0557 - Black
000-6260 - Dk Gray
12-6180
57-0611
12-6304
57-0542 - Black
000-6252 - Gray
SM13180 x 4
12-5621
56-0587
000-6244
902-4707 x 4
02-9307 x 4
SM27579 x 4
57-0373
001-6365
57-0541 - Black
000-6251 - Gray
SM17686 x 4
899-0004
03-4036 x 3
57-0487
SM22214
40654 x 2
12-7501
000-6324
Silver Paint
001-6365
000-6244
57-0563
901-5496 x 2
57-0556 Black
000-6259 - Dk Gray
12-6305
95-0614 L
95-0614 R
SM17815 x 2
57-0562
01-4094
03-3043
57-0391 x 2
001-0391
Silver Paint
03-4036 x 2
57-0389
SM17787
40654 x 13
12-5621
01-4036 x 2
12-1151
75-1205
57-0388
03-3043
57-0469
SM40760
SM40761
57-0538
57-0350-01 (North America)
57-0350-02 (Europe)
57-0350-03 (Switzerland)
57-0350-04 (United Kingdom)
57-0350-05 (Australian)
000-6264
02-4130 X 2
05-5130 x 2
12-8005
72-1213B
10-2035
09-1224
03-9080
75-1208
12-1151
75-1205
Zinc Plated
19-6000
02-4174 X 4
02-4174 X 4
02-4177
75-1207
Zinc Plated
12-6180
57-0482
71-1203
001-0424
19-1043
03-1035
04-5213
03-4034 X 3
40654 X 3
57-0350
57-0537
57-0482
57-0373
57-0554
57-0536
57-0478 x 2
57-0608
57-0465
902-5681 X 4
02-9220
01-4064
x2
56-0585
x2
56-0584
x2
SM17787
57-0555 - Black
000-6257 - Dk Gray
03-1035
x2
40654 x 3
U10 Upright Bike
U10
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Field Service Requests: [email protected]
GSA Parts Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
www.medfitsystems.com
57-0465 H10 Console ATSC DOM TV KIT 10"
57-0470 H10 Console DVB-T TV KIT 10"
57-0393 H10 Console Kit 7"
TO 57-0507
(JP2)
(CONSOLE)
(57-0509)
R
TO 57-0507
(CN6)
57-20008
HR SENSOR
LOWER CONTROL BOARD
(57-0485)
POWER TO
BCLB002 (J3)
L
(57-20016)
(57-0469)
TO BRAKE
(CN2)
INTERMEDIATE
CONTROL BOARD
(57-0507)
(57-0563)
(J1) TO
CONSOLE
FAN (J4)
TO GENERATOR
(CN1)
(J2) TO
BCLB002
+
(57-0562)
-
BATTERY
(57-0355)
POWER
IN (J5)
10 AMP FUSE
(57-0575)
15V dc
(57-0478)
GENERATOR CABLE,
3 PIN SUPPLIED
WITH 57-0482.
(57-0536)
TV CABLE
NOT AVAILABLE
ON 57-0393
GREEN
REV
(57-0554)
Right
12V dc
FAN
PLUG
WHITE
CONTACT
HEART RATE GRIPS
12-6180
BRAKE CABLE, 2 PIN
SUPPLIED WITH 57-0482
RED
Left
BLACK
BRAKE
(57-0482)
(57-0537)
FAN
(57-0376)
(57-0469)
POWER
(57-0538)
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Field Service Requests: [email protected]
GSA Parts Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
www.medfitsystems.com
68cm
27in
123cm
48in
152cm
60in
Customer Service & Parts 800/ 235-2233
General Parts Requests: [email protected]
Warranty Field Service Requests: [email protected]
Med-Fit Systems, Inc. 800/ 831-7665
www.medfitsystems.com
U10 Upright Bike
U10
REV P

Similar documents

K2_REV2 - Rev A - Core Health and Fitness Support

K2_REV2 - Rev A - Core Health and Fitness Support Field Service Requests: [email protected] GSA Parts Requests: [email protected] Med-Fit Systems, Inc. 800/ 831-7665

More information