EAME-Catalog-FINAL-e

Transcription

EAME-Catalog-FINAL-e
ACCESSORY
ACCESSORY
ACCESSORY
ACCESSORY
ACCESSORY
ACCESSORY
ACCESSORY
PRODUCTS
PRODUCTS
PRODUCTS
PRODUCTS
PRODUCTS
PRODUCTS
PRODUCTS
2010-2011
ACCESSORY PRODUCTS
Catalogue
EUROPE/AFRICA/
MIDDLE EAST
Keep your office
equipment in good condition
AF International provides a full range of specifically manufactured
cleaning products for use around people's workstations and offices.
Delicate office equipment such as expensive screens, photocopiers
and printers need regular cleaning, consumers are now recognising
the need for a specialist cleaner.
Electrolube wide range of high performance chemical
are used extensively by international electronics
manufacturing industries. The maintenance service aids
are designed to improve service quality extend equipment
life. From cleaners lubricants to paints airdusters.
Electrolube can provide a total solution for mobile
mechanics service engineers.
Maintenance
Service
Rebuilding photocopier
Table of Contents
Categorized Listing
Batteries
Energizer® Batteries
Carts
Norris 230 Multi-Purpose Cart
Norris 420 Muliti-Purpose Cart
Norris 700 Super Cart
Chemicals, Cleaners and Degreasers
AF Isoclene
AF Platenclene
AF Screen-Clene
AF Spray Duster
AF Staticlene
Dust-Off® Jr.
Dust-Off® Plus Gas Cleaner
Dust-Off® XL Cleaner
Electrolube
Foamclene
Katun Anti-Static Glass Cleaner
Katun Foam Cleaner
Katun Formula K
Katun Fuser Roller Cleaner
Katun Performance Drum Cleaner
Katun Spray Duster
Kresto® Cleaner
Label Remover
Multi-Purpose Grease
Permaguard
Plastic Grease
Ultraclens
Chemicals, Lubricants
Cyanolube Adhesive
Fuser Film Grease
Katun Performance All Purpose Lubricant
Katun Performance Drum Supplies
Cleaning Cloths
Charge Roller Wpies
Chicopee Cleaning Cloths
Chicopee Soft Cloths
Chix Dura Wipes®
Chux® Wipes
Drop Cloths
Webril® Cleaning Pads
Wypall Cleaning Cloths
Filters
Dexwet Filters
Flashlights and Accessories
Mag-Lite
Hardware Kit
Hardware Kit
Miscellaneous Supplies and Accessories
3M™ Scour Pads
3M Tape
Disposable Gloves
Compartment Boxes
Katun Performance Drum Supplies
Katun Work Mat
Oilers - Precision
1
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
5
5
5
6
6
6
7
7
7
7
8
8
8
9
9
9
9
9
10
10
10
10
10
11
11
11
12
12
12
13
13
13
13
13
13
14
14
14
14
15
15
Plastic Bottles
Multimeters and Testers
Triplett Model 1101-A
Triplett Model 9005
Triplett Model 9015
Triplett Model 9045
Triplett Test Leads
Test Patterns
Katun Test Patterns
Tools, Hard Sided Cases
15
16
16
16
17
17
18
18
18
18
Platt Polyethylene Tool Case
Platt Polypropylene Tool Case
Platt Polypropylene Tool Case w/Divider
Platt Supervisor’s Tool Case
18
19
19
19
Tools, Tool Cases and Pallets
20
Platt Tool Pallets
Tool Case Replacement Parts
Trolley Laptop/Tool Case
20
20
20
Tools, Soft Sided Cases
21
CH Ellis Sectional Zipper Tool Case
CH Ellis Tool Case
Platt Advanced Zipper Case
Platt Laptop/Notebook Case
Platt Soft Sided Tool Case
Tools, Kits
Advanced Tool Kit - Deluxe Hard Side
Advanced Tool Kit - Hard Side
Deluxe Technician Tool Kit w/Case
Essential Copier Tool Kit - Tools Only
Essential Tool Kit - Hard Side
Essential Tool Kit - Soft Side
Master Technician Tool Kit
Technician Tool Kit - Hard Side
Technician Tool Kit - Soft Side
Universal Copier Tool Kit - Hard Side
Tools, Other Tools and Accessories
Clip Tools
Dust Blower
Dusting Brushes
E-ring Tools
File Set
Gauges
Gerber Knives
Katun Magnetic Nut Driver
Knives
Leatherman® Tools
Level
Magnetic Pickup Tool
Magnetizer/Demagnetizer
Round Mirror
Ratcheting Screwdriver Bits
Soldering Iron
Soldering Iron, Gascat 40
Soldering Tools
Spring Hooks
Steel Rulers
Tools, Pliers, Cutters and Wrenches
21
21
21
22
22
23
23
23
24
24
25
25
26
26
27
27
28
28
28
28
28
29
29
29
30
30
31
31
32
32
32
32
33
33
33
34
34
34
Table of Contents
Categorized Listing
Pliers - Wrenches
Pliers - Retaining Ring
Pliers - Cutters
Pliers - Mini
Pliers - Needle Nose
Pliers-Vise Grip®
Wrench Sets
34
35
36
36
37
37
37
Tools, Screwdrivers
38
Flat Tip Screwdrivers
Phillips Screwdrivers
Potentiometers Adjusters
Ratcheting Screwdrivers
Screwdriver Sets
38
39
39
40
41
Vacuums, Accessories
41
3M™ Vacuum Accessories
Jr. Vacuum Carrying Cases
Ultivac Vacuum Accessories
Vacuum Carrying Cases
41
42
42
42
Vacuums, Filters
3M Electronics Vacuum
3M Field Service Vacuum
3M™ Vacuum Filters
Atrix High Capacity Vacuum
Atrix High Capacity Vacuum Filter
Omnifit® Vacuum Filters
Ultivac Deluxe Vacuum Cleaner
Ultivac Jr.® Filters
Ultivac Jr. Vacuum
Ultivac Service Vacuum Cleaner
43
43
43
44
44
44
45
45
45
46
46
Batteries
Energizer® Batteries
The battery that never quits. Long-life batteries from the world's largest dry-cell manufacturer.
Katun PN
Product Description
Pricing Unit
014061
014062
014063
Energizer Alkaline Battery, 9 Volt
Energizer Alkaline Battery, AA-Cell
Energizer Alkaline Battery, AAA-Cell
Priced per Package, 1 Battery per Package.
Priced per Package, 4 Batteries per Package.
Priced per Package, 4 Batteries per Package.
Carts
Norris 230 Multi-Purpose Cart
The Norris 230 is a light duty folding hand cart weighing only 70 kilograms.
• Just over 70 kg capacity.
• Luggage wheel guards protect your luggage.
• Expanding deck for large loads.
• Strong steel construction.
• Plastic safety hooks.
• Easy foldaway action; fits into airline overheads or under seats.
• Limited Lifetime Warranty
Katun PN
Product Description
011708
Norris 230 Multi-Purpose Cart
Norris 420 Muliti-Purpose Cart
The Norris 420 is a medium duty cart with 15.2 cm steel hub, ball bearing rubber wheels, and a 17.8 cm
wide padded handle.
• Just over 70 kg capacity.
• Single motion squeeze handle telescopes cart closed for space-saving storage and portability.
• Sturdy parallel stair glides.
• Unique safety loop securing cords.
• Guards in front of wheels protect soft cases.
• Limited Lifetime Warranty.
Katun PN
Product Description
011709
Norris 420 Multi-Purpose Cart
Page 1
Carts
Norris 700 Super Cart
The Norris 700 is a heavy duty telescoping cart that is widely used as is or upgraded with unique click-ngo attachments for specialized applications
• 181 kg capacity, weighs only 7 kg.
• Unique safety loop securing cords.
• Sturdy parallel stair glides.
• Load tray accommodates a wide range of sizes and shapes.
• Single motion squeeze handle telescopes cart closed for space-saving storage and portability.
• Limited Lifetime Warranty
Katun PN
Product Description
011710
Norris 700 Super Cart
Chemicals, Cleaners and Degreasers
AF Isoclene
Specially formulated solution removes light toner film from selenium alloy photoreceptors and is also an
excellent general purpose solvent.
• 99.7% pure isopropyl alcohol.
• Cleans effectively without leaving residue.
• Contains no CFC's.
Katun PN
Product Description
012490
012491
AF Isoclene-250ml pump can
AF Isoclene-1 litre can
AF Platenclene
Environmentally friendly blend of solvents cleans and restores platens and many other rubber surfaces.
• Efficiently removes grease, dirt and ink.
• Restores grip and texture, leaving no residue.
• 100%-recyclable aluminum can.
Katun PN
Product Description
010388
012494
AF Platenclene-100ml pump can
AF Platenclene-1 litre can
Page 2
Chemicals, Cleaners and Degreasers
AF Screen-Clene
Anti-static spray effectively cleans lenses, mirrors, and platen glass.
• Special non-smearing formula.
• Highly effective for cleaning Video Display Units (VDUs).
Katun PN
Product Description
010391
AF Screen-Clene 250ml pump bottle
AF Spray Duster
Compressed gas excellent for blasting dust and debris out of hard-to-reach areas.
• Convenient, detachable nozzle with adjustable spray velocity.
• Contains no CFC's
• 100%-recyclable aluminum can
Katun PN
Product Description
010394
010395
AF Spray Duster-125ml aerosol can
AF Spray Duster-400ml aerosol can
AF Staticlene
Anti-static surface cleaner thoroughly removes grease, dirt, and dust from plastic and painted office
equipment exteriors. Not for use on lenses, mirrors, or other glass.
• Ideal for cleaning copiers, facsimile machines, and computer equipment.
• Neutralizes static charges.
• Environmentally friendly, biodegradable formula
Katun PN
Product Description
012492
012493
AF Staticlene-250ml pump bottle
AF Staticlene-5 litre bottle
Dust-Off® Jr.
Dust-Off® is the preferred professional dusting system for removing toner, dust, lint, and other particles
from crevices and other tight spaces in office equipment. Compact size for cleaning tight spaces. Same
efficient blasting power as larger models. 100% ozone safe.
Katun PN Product Description
Pricing Unit
021902
708051
Priced per aerosol can, sold in Cases of 24.
Sold per can
Dust-Off Jr., 3.5 oz, Ctn/24
Dust-Off Jr. Disposable Gas Cleaner
Page 3
Chemicals, Cleaners and Degreasers
Dust-Off® Plus Gas Cleaner
Dust-Off® is the preferred professional dusting system for removing toner, dust, lint, and other particles
from crevices and other tight spaces in office equipment.
• Recommended for office equipment controls and other sensitive areas.
• Dust-Off Plus 360° Vector Valve® moves vertically and sweeps in full circles to clean hard-to-reach
areas.
• Filtered to 1-micrometer particle size.
• Contains no CFCs.
Katun PN Product Description
021916
708049
708050
Pricing Unit
Dust-Off Plus Refill, Ctn/12
Priced per Case, 12 aerosol cans per Case.
Dust-Off Plus Compressed Gas Cleaner Priced per can
Dust-Off Plus Compressed Gas Refill
Priced per can
Dust-Off® XL Cleaner
Dust-Off® is the preferred professional dusting system for removing toner, dust, lint, and other particles
from crevices and other tight spaces in office equipment. Larger-size disposable can gives you a great value.
Provides potent dust-removing power for practically any task. 100% ozone safe.
Katun PN Product Description
Pricing Unit
011639
Sold per can
021899
Dust-Off XL Compressed Gas
Cleaner-10 oz
Dust-Off XL, 10 oz., Ctn/12
Priced per Case, 12 aerosol cans per Case.
Electrolube
Highly Conductive Grease
Ideal for applications where low electrical resistivity is required.
• Suitable for operating environments up to 100°C.
• Water- and corrosion-resistant formulation.
• Compact tube fits easily in a tool case.
High-Temperature Grease
Lubricates at temperatures up to 250°C.
• Water- and corrosion-resistant formulation.
• Compact tube fits easily in a tool case.
Katun PN
Product Description
015538
015539
Electrolube High-Conductive Grease
Electrolube High-Temperature Grease
Page 4
Chemicals, Cleaners and Degreasers
Foamclene
Nonsmearing, antistatic foaming cleanser thoroughly cleans plastic casings, keyboards, and all types of
office equipment exteriors.
• Neutralizes static charges and eliminates dust buildup.
• Ideal for use with either paper or cloth wipes.
• Contains no CFCs.
• 100%- recyclable aluminum can.
Katun PN
Product Description
010384
Foamclene 300 ml
Katun Anti-Static Glass Cleaner
Katun Anti-Static Glass Cleaner/Conditioner
Katun's best glass cleaner, developed specifically for copiers with document feeders and duplicators, is
specially formulated to clean and condition glass in one application. Get great cleaning power without.
leaving streaks, film, or static buildup for a long-lasting, friction-free surface.
• Creates smooth, slick surface to help eliminate paper jams.
• Removes dust, dirt, fingerprints, and other contaminants, and prevents their return.
• Fast-drying formula saves time.
• Works great on auto windshields to shed rain, dirt, and dust.
Katun PN
Product Description
015490
015491
Katun Anti-Static Glass Cleaner-5 litre
Katun Anti-Static Glass Cleaner-250ml
Katun Foam Cleaner
CFC-free, anti-static foam cleaner is ideal for use on all types of office equipment exteriors. For use with
either paper or cloth wipes. 400ml can, 12 per case.
• Neutralizes static charges and eliminates dust buildup.
• Special non-smearing formula leaves no residue.
• 100%-recyclable aluminum can.
Katun PN
Product Description
015495
KATUN Foam Cleaner 400 ml
Page 5
Chemicals, Cleaners and Degreasers
Katun Formula K
Katun Formula K Cleaner specially-formulated solution, provides the ideal detergent strength for office
equipment exteriors. NOTE: Not formulated for use on lenses, mirrors, or other glass surfaces.
Katun PN
Product Description
015492
015493
Katun Formula K-5 litre bottle
Katun Formula K-250ml pump can
Katun Fuser Roller Cleaner
High strength solvent which thoroughly cleans and degreases developer rollers and other metal surfaces.
Not for use on photoreceptors.
Katun PN
Product Description
036788
036789
Katun Fuser Roller Solvent, 1 Liter
Katun Fuser Roller Solvent, 250 ml
Katun Performance Drum Cleaner
Katun Selenium Alloy Photoreceptor Pumice
Provides sufficient abrasiveness to remove minor surface defects and oxidation from selenium tellurium
and arsenic triselenide photoreceptors.
• Proper application can extend photoreceptor life and reduce service costs.
• Apply polish or pumice with foam application pads, cleaning sponges, or Webril® wipes and pads.
Katun Selenium Alloy Photoreceptor Polish
Recommended for polishing selenium tellurium and arsenic triselenide photoreceptors to remove minor
surface defects and oxidation.
Katun OPC Photoreceptor Cleaner
Specially-formulated solution of deionized water and isopropyl alcohol - the strongest recommended
treatment - removes contaminants from Organic Photoconductors (OPCs).
Katun PN
Product Description
012495
707301
707302
Katun OPC Drum Cleaner
KATUN Se Drum Pumice
KATUN Se Drum Polish
Page 6
Chemicals, Cleaners and Degreasers
Katun Spray Duster
The fast, economical way to remove toner, dust, and other contaminants from hard-to-reach spaces in
office equipment. 400 ml can, 12 per case.
• Convenient, detachable nozzle with adjustable spray velocity.
• Moisture-free formula leaves no residue.
• Ideal for office equipment controls and other sensitive areas.
Katun PN
Product Description
015494
KATUN Spray Duster 400 ml
Kresto® Cleaner
Use Kresto® EF® Hand Cleaner with a small amount of water, and this concentrated cleaning paste
quickly removes toner, grease, ink, glue, and other hard-to-remove substances from skin.
• Contains a safe solvent and mild scrubbing agent.
• Convenient tube for easy travel.
Katun PN
Product Description
708038
Kresto Hand Cleaner 250 ml tube
Label Remover
Remove paper labels on office equipment or furniture with Labelclene. Simply spray the solution on the
label, and within 5 minutes the label can be peeled off. It's easy!
• Brush applicator included for stubborn residues
• Environmentally friendly, contains no hazardous solvents
• Pleasant citrus smell
Katun PN
Product Description
022675
Labelclene Label Remover 200 ml
Multi-Purpose Grease
Multi-purpose Grease
Versatile lubricant resists wear and abrasion in a wide range of temperatures.
• Lubricates effectively in temperatures from -40° to 125°C.
• Compatible with most thermoplastic, including ABS and Polycarbonate, even at high temperatures.
Katun PN
Product Description
012503
Multi-Purpose Grease 50 ml tube
Page 7
Chemicals, Cleaners and Degreasers
Permaguard
This multipurpose, environmentally friendly maintenance fluid coats and protects metals, preventing water
damage, rust and corrosion.
• Ideal lubricant for office equipment parts, electrical connections and tools.
• Quickly penetrates corroded parts for easy removal.
• Ozone depletion potential (ODP) of zero.
Katun PN
Product Description
012501
Permaguard 200 ml
Plastic Grease
Special Plastics Grease - Effective synthetic lubricant for plastic-on-plastic or plastic-on-metal
applications.
Katun PN
Product Description
012504
Special Plastic Grease 30 ml syringe
Ultraclens
General purpose solvent with powerful penetrating action for heavy-duty degreasing applications.
• Slow-drying formula breaks down grease.
• Ozone friendly.
Katun PN
Product Description
023888
Ultraclens 400 ml
Page 8
Chemicals, Lubricants
Cyanolube Adhesive
Tough, one-step adhesive bonds most plastic, metal, rubber and glass surfaces in seconds.
• Convenient squeeze bottle with applicator tip for precise application.
Katun PN Product Description
Pricing Unit
012499
Priced per Package, 6 Tubes per Package.
Cyanolube Adhesive 5 g tube
Fuser Film Grease
Katun PN
Product Description
023314
Fuser Film Grease 2 g tube
Katun Performance All Purpose Lubricant
This all-purpose lubricant is Katun's best ever! Coats and protects metal parts to extend life and enhance
performance. Premium-grade solvent-refined oil inhibits oxidation and reduces foaming. High-quality
formula also displaces moisture to ensure even greater protection of vital parts.
• For use in both low and high temperature applications (up to 200° F, 93° C).
• Use on bearings, bushings, spring clutches, slide mechanisms, scanner rails, and more.
• Special adjustable spout can be lengthened to over 8 inches-great for lubricating those hard-to-reach
areas.
• Non-drying formula.
• Excellent viscosity for increased lubricant adhesion.
Katun PN
Product Description
016961
KATUN All Purpose Lubricant 118 ml
Katun Performance Drum Supplies
Katun Dusting Pouches contain pre-installation lubricants ideal for photoreceptors and urethane drum
cleaning blades. Highly recommended to prevent damaging "blade flip".
Katun Zinc Stearate Powder Dusting Pouch
• Recommended for lubricating selenium alloy photoreceptors and urethane drum cleaning blades.
• Larger particle size is ideal for use on "swirled surface" As2Se3 drums.
Katun Kynar Dusting Pouch
• Recommended for lubricating OPCs, selenium alloy and a-Si photoreceptors, and urethane drum
cleaning blades.
• Small particles prevent drum abrasion and will not absorb moisture.
Katun PN
Product Description
707200
707321
Dusting Pouch with Kynar
KATUN Drum and Blade Dusting Pouch
Page 9
Cleaning Cloths
Charge Roller Wpies
Katun Charge Roller Cleaning Wipes remove harmful contaminants from the charge roller's surface,
extending the life of the charge roller by restoring proper charge transfer capabilities. Each wipe can
clean a charge roller up to 350 mm in length and 20 mm in diameter.
Katun PN Product Description
Pricing Unit
027935
Priced per Bag, 5 wipes per Bag
Charge Roller Cleaning Wipes
Chicopee Cleaning Cloths
Chicopee® Stretch'n Dust® medium-duty, single-use dusting cloths are designed for fast pickup of dry
toner.
• Slight stretching releases mineral-based chemicals to attract toner, dust, and other particles.
• Pocket-forming design provides thorough cleaning.
• Discard after use; avoid open flame.
• Large 31.7 cm x 43.1 cm cloths.
• 10 bags per case.
Katun PN Product Description
Pricing Unit
011532
707314
Priced per Bag, 40 Cloths per Bag.
Priced per Box, 400 Cloths per Box.
Stretch’n Dust Cleaning Wipes
Stretch’n Dust Cleaning Wipes
Chicopee Soft Cloths
Chicopee Chix® Soft Cloth, absorbent, lint-free cloths, are ideal for cleaning lenses, mirrors, glass, and
more.
• Effective for applying recommended fluids to photoreceptors.
• Durable - even when wet.
• Large 34.2 cm x 38.1 cm cloths; 40 cloths per bag.
• 30 bags per case.
Katun PN Product Description
Pricing Unit
011599
707338
Priced per Case, 30 Bags per Case.
Priced per Bag, 40 Cloths per Bag.
Chicopee Soft Cloths
Chicopee Soft Cloths
Chix Dura Wipes®
Chicopee Chix Dura Wipe® brand product offer soft, lint-free wipes that are ideal for cleaning glass,
lenses, mirrors, cabinets, and other surfaces.
• Made of a durable polyester/rayon blend for heavy-duty applications.
• Each wipe measures 30.4 cm x 30.4 cm.
• 25 wipes per bag; 16 bags per case.
Katun PN Product Description
Pricing Unit
012749
016243
Priced per Box, 400 Towels per Box.
Priced per Bag, 25 Wipes per Bag.
Dura Wipes
Dura Wipes
Page 10
Cleaning Cloths
Chux® Wipes
Chicopee CHUX® Double Creped Industrial Wipes go the distance. These durable, absorbent wipes work
on even the toughest cleaning jobs.
• Each wipe measures 30.4 cm x 34.2 cm.
Katun PN Product Description
Pricing Unit
017924
017925
Priced per Bag, 56 Cloths per Bag.
Priced per Case, 18 Bags per Case.
Chux Wipes, 56 cloths/bag
Chux Wipes,18 bags/case
Drop Cloths
Kendall Drop Cloths protect service areas against spills, saving cleanup time and increasing customer
satisfaction. 150 drop cloths per case.
• Polyethylene backing bound to cellulose core will absorb up to 20 oz. of liquid.
• Each drop cloth measures 58.4 cm x 91.4 cm.
Katun PN Product Description
Pricing Unit
016271
708812
Priced per Package, 25 Cloths per Package.
Priced per Box, 150 Cloths per Box.
Absorbent Drop Cloths
Absorbent Drop Cloths
Webril® Cleaning Pads
Webril® Wipes and Handi-Pads are 100% felted cotton -with no binders or chemicals- for absorbent, shredfree wiping. Nonabrasive texture is excellent for photoreceptor cleaning.
Handi-Pads
• Convenient 10.2 cm x 10.2 cm squares are easy to handle.
Wipes
• Perforated roll allows convenient access with no waste.
• Each wipe measures 20.3 cm x 20.3 cm.
• 8 rolls per case.
Katun PN Product Description
Pricing Unit
708040
708041
Priced per Package, 100 Pads per Package.
Priced per Roll, 100 Wipes per Roll.
Webril Handi-Pads
Webril Wipes
Page 11
Cleaning Cloths
Wypall Cleaning Cloths
Kimberly-Clark® L30 EconoMizer® Towels
These soft, cloth-like towels are ideal for a variety of light-duty cleanups. Convenient 90-count pack will
last for several maintenance calls.
• Quality material at an economic price.
• Each wipe measures 30.4 cm x 35.6 cm
• 12 packs per case
PN 021286, 021338
Kimberly-Clark WypAll® Plus L40 Pop-up White Towels
Durable, reinforced towels stand up to heavy use.
• Pop-up dispenser delivers one towel at a time.
• Each towel measures 25.4 cm x 40.6 cm
• 100 towels per box; 9 boxes per case.
PN 708017
Kimberly-Clark WypAll® L40 Blue Towels
Cellulose-based, all-purpose towels feel and work like cloth.
• More practical and economical than rental shop towels.
• Each towel measures 31.8 cm x 38.1 cm.
• 56 towels per bag; 12 bags per case.
PN 018276, 021385
Katun PN Product Description
Pricing Unit
018276
021286
Priced per Box, 672 Towels per Box.
Priced per Case, 12 Bags per Case.
021385
708017
WypAll Blue Towels
Wypall Economizer Towels, 12
Bags/Case
WypAll Blue Towels
WypAll Plus White Towels
Priced per Bag, 56 Towels per Bag.
Priced per Box, 100 Towels per Box.
Filters
Dexwet Filters
The new and improved Dexwet filtering systems significantly reduce fine dust emissions from laser
printers, resulting in fewer airborne particles and less indoor air pollution. Designed for easy installation
on machines without blowing fan exhaust openings. These filters are compatible with a wide range of
imaging applications, including the majority of today's most popular laser printers and copiers.
To find the printer model in which the filter can be used please check our website at
www.katun.com/resourcecenter/resourcecenter.html or go to www.dexwet.com
Katun PN Product Description
Pricing Unit
034489
Dexwet Simular One Air Filter
034490
Dexwet Modular Professional Air Filter
Priced Each, Sold in Boxes of 1, 22 Boxes per
Master Carton
Priced Each, Sold in Boxes of 1, 22 Boxes per
Master Carton
Page 12
Flashlights and Accessories
Mag-Lite
Mag-Lite® Lighting Instruments are top quality handheld lights designed and manufactured for
unparalleled reliability and performance.
• Easily adjustable from spot beam to flood light.
• Patented self-cleaning switch resists corrosion.
Katun PN Product Description
Pricing Unit
014121
015335
737500
737501
737506
737507
Priced Each
Priced Each
Priced Each
Priced Each
Priced per Package, 2 Bulbs per Package.
Priced per Package, 2 Bulbs per Package.
Mag-Lite Solitaire
Mag-Lite D 4-Cell
Mini Mag-Lite AAA
Mini Mag-Lite AA
Replacement Bulb Sol AAA
Replacement Bulb Mini AA
Hardware Kit
Hardware Kit
The Katun Complete 180-piece Universal Hardware Kit is the answer to requests of service technicians
worldwide. Katun has assembled this comprehensive, 180-piece hardware kit to meet the needs of
technicians in the field. Individual, reclosable bags contain 10-piece supplies of the fasteners most
commonly utilized in Japanese-designed office equipment.
• All fasteners are manufactured in Japan to meet all Japanese Industrial Standards.
• Tough, chemical-resistant polypropylene case organizes and protects fasteners.
Katun PN
Product Description
010105
Metric Hardware Kit
Miscellaneous Supplies and Accessories
3M™ Scour Pads
3M Scotch-Brite Pads are general-purpose, heavy-duty cleaning pads, ideal for cleaning clutch faces,
corona wires and machine covers.
• Heavy-duty pads effectively remove burrs from roller shafts.
• Each pad measures 9.8 cm x 16.2 cm.
Katun PN Product Description
Pricing Unit
012647
016471
Priced Per Case
Priced per Pack, 3 Pads per Pack.
3M Heavy Dutiy Cleaning Pad
3M Scotch-Brite Scour Pad
Page 13
Miscellaneous Supplies and Accessories
3M Tape
3M™ Temflex™ 1700 General Use Vinul Electrical Tape is used for protective jacketing and harnessing.
Abrasive and UV resistant. UL Listed and CSA Certified for 176○ F (80○ C). This black, 7-mil vinyl tape is
the economical solution for less demanding indoor jobs.
Katun PN
Product Description
707205
3M Vinyl/Plastic Tape 1700
Disposable Gloves
Disposable Gloves, available in latex or vinyl, protect hands while using cleaning solvents, and prevent
contamination of photoreceptor surfaces during installation and maintenance.
• Gloves stretch to provide a snug fit; medium and large sizes available.
• Recommended for handling all types of photoreceptors.
• 100 gloves per box.
Katun PN Product Description
Pricing Unit
708060
708061
708814
708826
Priced per Box, 100 Gloves per Box.
Priced per Box, 100 Gloves per Box.
Priced per Box, 100 Gloves per Box.
Priced per Box, 100 Gloves per Box.
Medium Disposable Latex Gloves
Large Disposable Latex Gloves
Medium Disposable Vinyl Gloves
Large Disposable Vinyl Gloves
Compartment Boxes
Tuff-Tainers help you stay organized and protect valuable parts and components. They're made to resist
most common chemicals and include snap latches and detachable lids.
• Large Tuff Tainer measures 9" x 41 2" x 11 2" with 15 dividers.
• Small Tuff Tainer measures 4" x 7" x 1" with 15 dividers.
• Parts not included.
Katun PN
Product Description
020661
020662
Compartment Box - Small
Compartment Parts Box-Large
Katun Performance Drum Supplies
Katun Drum bags protect any size photoreceptor or drum unit/cartridge (DU/C) from damaging ultraviolet
light (sunlight). Just place the drum or DU/C in this Katun drum bag during machine service. Exposure to
ultraviolet light causes permanent damage to a photoreceptor.
• Measures 69.9 cm x 30.5 cm.
• Washable ultra-fine weave fabric with drawstring closure.
• Black with blue Katun logo.
Katun PN
Product Description
019183
Katun Drum Bag
Page 14
Miscellaneous Supplies and Accessories
Katun Work Mat
Katun Technician Work Mat protects equipment from scratches, dirt, and grease. Cover your work area
with this toner-resistant work mat. The work mat provides a safe, non-slip surface for placing tools and
work materials.
• Measures 59.7 x 59.7 cm.
• Eliminates the need for disposable work mats.
• Features 3M, Snap-on, and Katun logos.
• Lightweight, durable material cleans easily and is long-lasting.
Katun PN
Product Description
021381
Katun Work Mat
Oilers - Precision
This handy, reusable, Precision Oiler features a 13.9 cm angled brass spout ideal for lubricating hard-toreach areas.
• Nozzle twists shut tightly to prevent leaks.
• Fully compatible with liquid or dry lubricants.
Katun PN
Product Description
012161
Precision Oiler
Plastic Bottles
These reusable plastic bottles, made of Polyethylene, are ideal for storing and accessing isopropyl
alcohol or other required liquids. Available in 4 oz and 8 oz size.
• Flip-top spouts seal bottles securely but open easily for use.
• Spray nozzles dispense a fine mist ideal for most cleaning applications.
Katun PN
Product Description
011649
011650
023056
708019
708020
Plastic Bottle w/Nozzle-8 oz
Plastic Bottle w/Nozzle-4 oz
8 Oz Squeeze Bottle, RC Kit
Reusable Squeeze Bottle-4 oz
Reusable Squeeze Bottle-8 oz
Page 15
Multimeters and Testers
Triplett Model 1101-A
Model 1101-A Compact DMM with Backlit Display & Temperature Test
• 3 1/2 digit, w/ 1999 max. reading
• Backlit display
• AC/DC voltage to 500V
• AC/DC current to 10A
• Temperature test (probe included)
• Resistance to 20MΩ
• Continuity test
• Diode check
• Transistor check
• Data hold
• Double insulated case
• CAT I and II rated
• Overload protected
• Three year warranty
• Includes red rubber boot, safety test leads with screw-on alligator clips, thermocouple probe & 9 volt
battery
Katun PN
Product Description
022118
Triplett Digital Multimeter-1101
Triplett Model 9005
Count on the Triplett 9005-A Digital Multimeter for performance and durability. Each multimeter includes a
protective red rubber boot, double insulated case, safety test leads with screw-on alligator clips, and
comes with a three-year warranty.
• Economical and efficient
• Large 2.5 cm high display
• Measures AC voltage to 750 V, DC voltage to 1000 V
• Measures AC & DC current to 10 A
• Measures resistance to 200MΩ
• Measures continuity, diode and transistor check
• 3 1/2 Digit, 1999 max. reading
• Manual range selection
• Data hold
• Auto polarity
• Overload protection
• Low battery indication
• Auto power off
• Double insulated case
• Safety designed to comply with IEC 1010-1
• CAT I, II, and III rated
• Overload protected
• 3 year warranty
• Include: red rubber boot, safety test leads with screw-on alligator clips & 9 volt battery
Katun PN
Product Description
022105
Triplett Digital Multimeter-9005
Page 16
Multimeters and Testers
Triplett Model 9015
Count on Triplett Model 9015 digital multimeters for performance and durability. Each multimeter includes
protective red rubber boot, double insulated case, safety test leads with screw-on alligator clips, and
comes with a three-year warranty.
• LSI integrated circuit for stability and accuracy
• Measures AC voltage to 750 V, DC voltage to 1000 V, Measures AC & DC current to 20 A
• Measures resistance, temperature, capacitance, and transistor gain
• Measures diode voltage drop and continuity, Measures frequency and transistors
• Auto power off, Data hold
• 3 1/2 Digit, 1999 max. reading
• HUGE 2.9 cm high digital display
• Manual range selection
• Temperature test (Probe Included) (Fº only), Capacitance test (Extension Lead Included)
• Frequency, Auto polarity
• Overload protection
• Low battery indication
• Double insulated case
• Safety designed to comply with IEC 1010-1, CAT I, II, and III rated
• Overload protected
• 3 year warranty
• Includes red rubber boot, safety test leads with screw-on alligator clips, thermocouple probe,
capacitance extension lead & 9 volt battery
Katun PN
Product Description
022106
Triplett Digital Multimeter-9015
Triplett Model 9045
New! 9045 RMS Autoranging Digital Multimeter
• 6000 Count Display
• 61 Segment Bargraph
• Blue Backlit LCD
• Auto / Manual Ranging
• DC Voltage Ranges to 1000V, AC Voltage Ranges to 750V
• AC/DC Current Ranges to 10A
• Resistance Ranges to 60M
• Temperature Test (Fº & Cº Selectable)
• Capacitance Ranges, Frequency Ranges
• Duty Cycle, Diode and Continuity Test
• Auto Polarity, Relative Mode, Data Hold
• Data Recording: Max/Min/Max-Min
• Flexible Auto Power Off
• Splash Proof / Dust Proof Case
• Overmolded, Shock Absorbing Case w/ Stand
• Safety designed to comply with IEC 1010-1
• CAT III 600 Volt / CAT II 1000 Volt Rated, Overload Protected
• Three Year Warranty
• Includes Safety Test Leads with Screw-On Alligator Clips, Thermocouple Probe & 9 Volt Battery
Katun PN
Product Description
022099
Triplett Digital Multimeter-9045
Page 17
Multimeters and Testers
Triplett Test Leads
The Test Lead Set is comprised of 121.9 cm replacement test leads with male, right-angle, shrouded,
banana plugs & insulated, screw-on alligator clips.
Katun PN
Product Description
009000
Test Lead Set
Test Patterns
Katun Test Patterns
Katun Technical Test Patterns assist service technicians/engineers with copier setup, troubleshooting,
and maintenance. Lexan Test Patterns are washable with mild soap and water. Test Pattern features
include:
• Resolution charts and borderlines.
• Grey scale and halftone samples.
• Ladder charts for image density adjustments.
• Continuous line/space array for checking fusing characteristics and pinpointing copy quality
inconsistencies.
Black and white-Lexan - A4, 10 per package (For use with b&w copiers)
Cardstock - A4, 10 per package (For use with b&w and color copiers)
Katun PN Product Description
Pricing Unit
305037
Test Pattern-B/W Lexan (A4)
305411
Test Pattern-Color Cardstock (A4)
Priced per Envelope, 10 Test Patterns per
Envelope.
Priced per Envelope, 10 Test Patterns per
Envelope.
Tools, Hard Sided Cases
Platt Polyethylene Tool Case
The Platt Deluxe Polyethylene Tool Case is a high-quality hard-shell case that is constructed of durable,
chemical-resistant polymers to retain its professional appearance year after year. Recessed key locks
provide security when required, and leather "golf-grip" handle maximizes carrying comfort.
• Interior features document pocket and fixed bottom divider.
• Molded-rib shell with black anodized frame.
• Includes adjustable divider system.
• Measures 45.7 x 33.0 x 15.2 cm.
Katun PN Product Description
Pricing Unit
737617
Case only
Deluxe Polyethylene Platt Tool Case
Page 18
Tools, Hard Sided Cases
Platt Polypropylene Tool Case
The Platt Polypropylene Tool Case is a black hard-shell case.
• Durable extruded aluminum frame with cast-chrome key locks and cushioned handle.
• Interior features document pocket for convenient storage of manuals and other paperwork.
• Measures 45.7 x 33.0 x 15.2 cm.
Katun PN Product Description
Pricing Unit
737615
Case only
Polypropylene Platt Tool Case
Platt Polypropylene Tool Case w/Divider
The Platt Polypropylene Tool Case with Divider is a black hard-shell case that incorporates a bottom
divider to keep contents from shifting during transport.
• Durable extruded aluminum frame with cast-chrome key locks and cushioned handle.
• Interior features document pocket for convenient storage of manuals and other paperwork.
• Measures 45.7 x 33.0 x 15.2 cm.
Katun PN Product Description
Pricing Unit
014500
Case only
Polypropylene Platt Tool Case
Platt Supervisor’s Tool Case
The Platt Supervisor's Tool Case is constructed of anodized aluminum with matching key locks and
sturdy, full-length piano hinges. This durable polyethylene hard-shell case will retain its professional
appearance under intensive use.
• Includes tool pallet, bottom dividers, and flat writing pallet.
• Cushioned handle increases carrying comfort.
• Measures 50.8 x 38.1 x 15.2 cm.
Katun PN Product Description
Pricing Unit
010442
Case only
Polyethylene Platt Tool Case +Bottom
Lid
Page 19
Tools, Tool Cases and Pallets
Platt Tool Pallets
Platt Tool Case Pallets allow you to choose your preferred configuration from the versatile designs
available. All these pallets feature securely stitched pockets, riveted at pressure points for maximum
durability.
NOTE: Tools not included. Pallets fit 45.7 x 33.0 cm cases only. Pictured: Pn 010564
Katun PN Product Description
Pricing Unit
010564
010565
012660
014774
Priced per Set, 2 Pallets per Set.
Priced per Set, 2 Pallets per Set.
Priced per Pallet
Priced per Pallet
Tool Case Pallet Set A - 48 total slots
Tool Case Pallet Set B - 36 total slots
Tool Pallet- Universal - 22 slots
Tool Pallet- Bottom - 19 slots
Tool Case Replacement Parts
Platt Tool Case Replacement Parts extend the life of your Platt Tool Case investment. Handles available
in both deluxe and plastic cushion grip. Replacement locking latch available in chrome/silver and black.
Replacement stays allow for case to stay open for handy access.
Katun PN
Product Description
018161
018162
018164
018165
A) Plastic Cushion Grip Handle
B) Deluxe Black Handle
C) Locks-Black
D) Locks-Silver
Trolley Laptop/Tool Case
LONGS Trolley Laptop-Tool Case Including Toolpallet
Combination of tool case and Laptop case. Tool compartment has 1 removable toolpallet with 21 elastic
straps, 3 open pouches and document pouch. The laptop compartment consists of 1 removable (zipper)
padded laptop pouch, 1 removable accessory pouch and a document pouch. Third compartment has
ample space and pockets for diverse usage.
Trolley feature is built in and has extended sturdy telescopic handle. Telescopic handle can be "zipped
in" when not in use. Case has a strong handle and there are 2 rings on the outside for attachement of
shoulder strap. Shoulder strap is optional.
Material: PVC
Colour: Black
Dimensions: 370 x 220 x 470 mm
Weight: 4.7 kilos
Katun PN
Product Description
034477
Trolley Laptop/Tool Case
Page 20
Tools, Soft Sided Cases
CH Ellis Sectional Zipper Tool Case
The Triple-Section Zipper Tool Case is easy to carry and use, this handy, highly durable case contains an
attaché section, tool case section, and spacious inner section for secure storage. "Flap-down" outer
sections and a double-zipper center section allow for outstanding accessibility.
• 36 conveniently arranged tool pockets allow easy access to tool of choice.
• Heavy-duty construction protects contents from impact damage.
• Built-in rings allow use of an included shoulder strap.
• Measures 48.3 x 36.8 x 25.4 cm.
Katun PN Product Description
Pricing Unit
013145
Case only
Triple Section Zipper Tool Case
CH Ellis Tool Case
This Tool Case with Laptop Storage is a functional case features 19 tool slots and padded pocket for a
notebook computer inside, plus three exterior pockets. Get maximum storage in this heavy-duty nylon
case.
• Includes detachable shoulder strap.
• Measures 45.7 x 33.0 x 8.9 cm.
• One-year manufacturer warranty.
Katun PN
Product Description
021384
Single Zipper Laptop/Tool Case
Platt Advanced Zipper Case
The Platt Advanced Zipper Case is a durable, lightweight case. Keeps tools, documents, and accessories
organized. Includes detachable shoulder strap.
• Interior has 29 stitched tool slots and pockets.
• One exterior pouch and one document pocket.
• 27.9 x 35.5 x 8.9 cm heavy-duty construction.
Katun PN Product Description
Pricing Unit
015800
Case only
Advanced Zipper Case
Page 21
Tools, Soft Sided Cases
Platt Laptop/Notebook Case
The Platt Laptop Computer Tool Case is perfect for service engineers who need their laptop computer
during service calls. This high-quality tool case has a durable Cordura nylon exterior with industrial
zippers.
• Tool side includes 47 sewn interior pockets and three exterior pockets with hook and loop closures.
• Attaché side has two pockets for files, manuals
• Additional side padded pocket with a hook and loop closure for a laptop computer.
• New larger size 45.7 x 33.0 x 15.2 cm.
• Includes removable shoulder strap and carrying handle.
Katun PN Product Description
Pricing Unit
016887
Case only
Laptop/Notebook Case
Platt Soft Sided Tool Case
The Platt Soft-Sided Tool Case is a versatile, soft-sided case that features a heavy-duty zipper, three
expandable exterior pockets, and a detachable shoulder strap.
• 48.3 x 39.1 x 12.1 cm ; stitched black Cordura.
• One-year manufacturer's limited warranty.
NOTE: Accommodates full-size tool pallets (not included).
Katun PN Product Description
Pricing Unit
012751
Case only
Soft Sided Tool Case
Page 22
Tools, Kits
Advanced Tool Kit - Deluxe Hard Side
Ensure your service technicians have every tool and accessory required for effective copier service-stored
in a rugged Platt hard-sided tool case for maximum protection and portability. Featuring premium-quality
tools and accessories from Snap-on and other trusted manufacturers, this kit will exemplify your
operation's high level of service and strong attention to detail. Case is constructed of chemical-resistant
polymers to retain professional appearance year after year.
Deluxe version features a Platt deluxe polyethylene tool case (Katun PN 737617) with adjustable dividers.
Kit Contains:,(1) Screwdriver-Phillips #2 40mm,(1) Screwdriver-Phillips #2 200mm,(1) ScrewdriverPhillips #2 100mm,(1) Screwdriver-Phillips #1 75mm,(1) Screwdriver-Flat Tip 100mm x 3.5mm,(1)
Screwdriver-Flat Tip 150mm x 6.5mm,(1) Screwdriver-Flat Tip/Phillips #1,(1) Plier-Cutter with Recoil
Spring,(1) Plier-Needle Nose With Recoil Spring,(1) 3M Vinyl/Plastic Tape 1700,(1) Feeler Gauge-Metric
0.05-1.00mm,(1) Wrench Set-Metric Hex 1.5- 5mm,(1) 2AA Cell Flashlight,(1) Spring Hook-Push/Pull,(1)
Swiss Army Knife,(1) Spring Hook-Captive,(1) Reusable Squeeze Bottle,(1) Plastic Bottle w/Nozzle-4
oz,(1) Retaining Ring Plier-Fixed Tip Convertib,(1) Ruler-Steel Metric 15 cm,(1) Brush Sash,(1)
Magnetizer/Demagnetizer,(1) Screwdriver Set-Miniature,(1) Plier-Vise Grip Curved Jaw 4",(1) Plier-Mini
Straight,(1) Plier-Wire Stripper/Cutter,(1) Screwdriver-Screw Starter Combination,(1) Pickup ToolTelescopic Magnetic,(1) Mirror-Round Pocket,(1) Dust Blower,(1) Wrench-Adjustable 6",(1) Level,(1)
Deluxe Polypropylene Platt Tool Case
Katun PN Product Description
Pricing Unit
017807
Priced per Kit, 32 Tools per Kit
Advanced Copier Tool Kit-Deluxe H.S.
Advanced Tool Kit - Hard Side
Ensure service technicians have every tool and accessory required for effective copier service. This
Advanced Copier Tool Kit features a hard-sided tool case and 32 high quality tools and accessories in two
pallets.
Platt Polypropylene Case (Katun PN 737615) was designed by service technicians.
Kit Contains:,(1) Screwdriver-Phillips #2 40mm,(1) Screwdriver-Phillips #2 200mm,(1) ScrewdriverPhillips #2 100mm,(1) Screwdriver-Phillips #1 75mm,(1) Screwdriver-Flat Tip 100mm x 3.5mm,(1)
Screwdriver-Flat Tip 150mm x 6.5mm,(1) Screwdriver-Flat Tip/Phillips #1,(1) Plier-Cutter with Recoil
Spring,(1) Plier-Needle Nose With Recoil Spring,(1) 3M Vinyl/Plastic Tape 1700,(1) Feeler Gauge-Metric
0.05-1.00mm,(1) Wrench Set-Metric Hex 1.5- 5mm,(1) 2AA Cell Flashlight,(1) Spring Hook-Push/Pull,(1)
Swiss Army Knife,(1) Spring Hook-Captive,(1) Reusable Squeeze Bottle,(1) Plastic Bottle w/Nozzle-4
oz,(1) Retaining Ring Plier-Fixed Tip Convertib,(1) Ruler-Steel Metric 15 cm,(1) Brush Sash,(1)
Magnetizer/Demagnetizer,(1) Screwdriver Set-Miniature,(1) Plier-Vise Grip Curved Jaw 4",(1) Plier-Mini
Straight,(1) Plier-Wire Stripper/Cutter,(1) Screwdriver-Screw Starter Combination,(1) Pickup ToolTelescopic Magnetic,(1) Mirror-Round Pocket,(1) Dust Blower,(1) Wrench-Adjustable 6",(1) Level,(1)
Polypropylene Platt Tool Case
Katun PN Product Description
Pricing Unit
015796
Priced per Kit, 32 Tools per Kit.
Advanced Copier Tool Kit- Hard Side
Page 23
Tools, Kits
Deluxe Technician Tool Kit w/Case
The Deluxe Technician Kit includes 43 tools and accessories in Platt polypropylene case with pallets.
This kit offers the ultimate in organization for the service professional.
Platt Polypropylene Case (Katun PN 737615) was designed by service technicians.
Kit Contains:,(1) Screwdriver Set-Miniature,(1) Screwdriver-Potentiometer Adjuster,(1) Screwdriver-Ball
Hex Tip 2.5mm,(1) Screwdriver-Ball Hex Tip 2 mm,(1) Screwdriver-Flat Tip 6"x1/4",(1) Screwdriver-Flat
Tip 4"x1/8" Thin Blade,(1) Screwdriver-Flat Tip 3"x1/8" Mini,(1) Screwdriver-Flat Tip 1 1/2"x1/4",(1)
Screwdriver-Phillips #1 3"Thin Blade,(1) Screwdriver-Phillips #2 8",(1) Screwdriver-Phillips #2 4",(1)
Screwdriver-Phillips #2 2",(1) Nut Driver-7mm,(1) Nut Driver-8mm,(1) Plier-Mini Straight,(1) Plier-Cutter
Tapered True-Flush,(1) Plier-Needle Nose With Cutter,(1) Plier-Wire Stripper/Cutter,(1) Retaining Ring
Plier-Fixed Tip Convertib,(1) Wrench-Adjustable Joint/Pipe 4 1/2",(1) Wrench-Adjustable 6",(1) Wrench
Set-Metric Hex 1.5- 5mm,(1) Wrench-Midget Fd 5.5mm 6 Pt,(1) Wrench-Midget Fd 7 mm 12 Pt,(1) PlierVise Grip Curved Jaw 4",(1) Screwdriver-Screw Starter Combination,(1) Feeler Gauge-Metric 0.051.00mm,(1) Mirror-Round Pocket,(1) Hammer, Ball Peen Hickory Handle 4 Oz,(1) Level,(1) Brush
Sash,(1) Magnetizer/Demagnetizer,(1) Mini Knife,(1) Spring Hook-Push/Pull,(1) Spring Hook-Captive,(1)
Ruler-Steel Metric 15 cm,(1) 3M Vinyl/Plastic Tape 1700,(1) Reusable Squeeze Bottle,(1) Compartment
Box (Katun Logo),(1) Mini Maglite AAA,(1) Polypropylene Platt Tool Case,(1) Tool Case Pallet Set B,(1)
Plier-Needle Nose Duck Bill Comfort Grip
Katun PN Product Description
009110
Pricing Unit
Deluxe Technician Tool Kit w/Platt Case Priced per Kit, 43 Tools per Kit.
Essential Copier Tool Kit - Tools Only
Provide your service technicians with a variety of tools and accessories they need for effective copier
service at an extremely attractive price. Featuring premium-quality tools and accessories from Snap-on
and other trusted manufacturers. Tools Only.
Kit Contains:,(1) Screwdriver-Phillips #2 40mm,(1) Screwdriver-Phillips #2 200mm,(1) ScrewdriverPhillips #2 100mm,(1) Screwdriver-Phillips #1 75mm,(1) Screwdriver-Flat Tip 100mm x 3.5mm,(1)
Screwdriver-Flat Tip 150mm x 6.5mm,(1) Screwdriver-Flat Tip/Phillips #1,(1) Plier-Cutter with Recoil
Spring,(1) Plier-Needle Nose With Recoil Spring,(1) Retaining Ring Plier-Fixed Tip Convertib,(1) Spring
Hook-Push/Pull,(1) Wrench Set-Metric Hex 1.5- 5mm,(1) Ruler-Steel Metric 15 cm,(1) 2AA Cell
Flashlight,(1) Brush Sash,(1) Feeler Gauge-Metric 0.05-1.00mm,(1) Magnetizer/Demagnetizer
Katun PN Product Description
Pricing Unit
016238
Priced per Bag, 17 Tools per Bag.
Essential Copier Tool Kit- Tools Only
Page 24
Tools, Kits
Essential Tool Kit - Hard Side
Essential Copier Tool Kits provide your service technicians with a variety of tools and accessories they
need for effective copier service at an extremely attractive price. Featuring premium-quality tools and
accessories from Snap-on and other trusted manufacturers, stored in a rugged Platt hard-sided tool case,
this kit will enhance your service operation's efficiency.
Platt Polypropylene Case (PN 737615) includes 17 frequently used tools and accessories, listed below:
Kit Contains:,(1) Polypropylene Platt Tool Case,(1) Screwdriver-Phillips #2 40mm,(1) Screwdriver-Phillips
#2 200mm,(1) Screwdriver-Phillips #2 100mm,(1) Screwdriver-Phillips #1 75mm,(1) Screwdriver-Flat Tip
100mm x 3.5mm,(1) Screwdriver-Flat Tip 150mm x 6.5mm,(1) Screwdriver-Flat Tip/Phillips #1,(1) PlierCutter with Recoil Spring,(1) Plier-Needle Nose With Recoil Spring,(1) Retaining Ring Plier-Fixed Tip
Convertib,(1) Spring Hook-Push/Pull,(1) Wrench Set-Metric Hex 1.5- 5mm,(1) Ruler-Steel Metric 15
cm,(1) 2AA Cell Flashlight,(1) Brush Sash,(1) Feeler Gauge-Metric 0.05-1.00mm,(1)
Magnetizer/Demagnetizer
Katun PN Product Description
Pricing Unit
015799
Priced per Kit, 17 Tools per Kit.
Essential Copier Tool Kit- Hard Side
Essential Tool Kit - Soft Side
Essential Copier Tool Kits provide your service technicians with a variety of tools and accessories they
need for effective copier service at an extremely attractive price. Featuring premium-quality tools and
accessories from Snap-on and other trusted manufacturers, this kit will enhance your service operation's
efficiency.
Platt Advanced Zipper Case (PN 015800) includes 17 of the most frequently used tools and accessories.
Kit Contains:,(1) Polypropylene Platt Tool Case,(1) Screwdriver-Phillips #2 40mm,(1) Screwdriver-Phillips
#2 200mm,(1) Screwdriver-Phillips #2 100mm,(1) Screwdriver-Phillips #1 75mm,(1) Screwdriver-Flat Tip
100mm x 3.5mm,(1) Screwdriver-Flat Tip 150mm x 6.5mm,(1) Screwdriver-Flat Tip/Phillips #1,(1) PlierCutter with Recoil Spring,(1) Plier-Needle Nose With Recoil Spring,(1) Retaining Ring Plier-Fixed Tip
Convertib,(1) Spring Hook-Push/Pull,(1) Wrench Set-Metric Hex 1.5- 5mm,(1) Ruler-Steel Metric 15
cm,(1) 2AA Cell Flashlight,(1) Brush Sash,(1) Feeler Gauge-Metric 0.05-1.00mm,(1)
Magnetizer/Demagnetizer
Katun PN Product Description
Pricing Unit
015798
Priced per Tool Kit, 17 Tools per Tool Kit.
Essential Copier Tool Kit- Soft Side
Page 25
Tools, Kits
Master Technician Tool Kit
The Platt Master Technician Tool Kit is an ultra-deluxe solution that provides maximum tool organization.
Featuring 46 tools and accessories and a Platt Deluxe high quality hard shell case designed to retain its
professional appearance year after year.
Platt Deluxe Polyethylene Case (Katun PN 737617) was designed for durablity and long lasting use.
Kit Contains:,(1) Screwdriver Set-Miniature,(1) Screwdriver-Potentiometer Adjuster,(1) Screwdriver-Ball
Hex Tip 2.5mm,(1) Screwdriver-Ball Hex Tip 2 mm,(1) Screwdriver-Flat Tip 6"x1/4",(1) Screwdriver-Flat
Tip 4"x1/8" Thin Blade,(1) Screwdriver-Flat Tip 3"x1/8" Mini,(1) Screwdriver-Flat Tip 1 1/2"x1/4",(1)
Screwdriver-Phillips #2 8",(1) Screwdriver-Phillips #2 2",(1) Screwdriver-Magnetic Ratcheting 4",(1) Nut
Driver-7mm,(1) Nut Driver-8mm,(1) Plier-Mini Straight,(1) Plier-Mini Curved,(1) Plier-Cutter Tapered TrueFlush,(1) Plier-Needle Nose Duck Bill Comfort Grip,(1) Plier-Needle Nose With Cutter,(1) Plier-Wire
Stripper/Cutter,(1) Retaining Ring Plier-Interchangeable Tip,(1) Wrench-Adjustable Joint/Pipe 4 1/2",(1)
Wrench-Adjustable 6",(1) Wrench Set-Metric Hex 1.5- 5mm,(1) Wrench-Midget Fd 5.5mm 6 Pt,(1)
Wrench-Midget Fd 7 mm 12 Pt,(1) Plier-Vise Grip Curved Jaw 4",(1) Screwdriver-Screw Starter
Combination,(1) Feeler Gauge-Metric 0.05-1.00mm,(1) Pickup Tool-Telescopic Magnetic,(1) Mirror-Round
Pocket,(1) Hammer, Ball Peen Hickory Handle 4 Oz,(1) Pocket Knife,(1) Premium Clip Tool,(1) Dust
Blower,(1) Level,(1) Brush Sash,(1) Magnetizer/Demagnetizer,(1) Spring Hook-Push/Pull,(1) Spring HookCaptive,(1) 3M Vinyl/Plastic Tape 1700,(1) Reusable Squeeze Bottle,(1) Compartment Box (Katun
Logo),(1) Mini Maglite AAA,(1) Deluxe Polyethylene Platt Tool Case,(1) Tool Case Pallet Set B
Katun PN Product Description
Pricing Unit
009111
Priced per Kit, 45 Tools per Kit.
Master Technician Tool Kit
Technician Tool Kit - Hard Side
The Hard-Sided Technician Kit includes 32 tools and accessories in a Platt polypropylene case.
Kit Contains:,(1) Screwdriver Set-Miniature,(1) Screwdriver-Potentiometer Adjuster,(1) Screwdriver-Ball
Hex Tip 2.5mm,(1) Screwdriver-Ball Hex Tip 2 mm,(1) Screwdriver-Flat Tip 6"x1/4",(1) Screwdriver-Flat
Tip 4"x1/8" Thin Blade,(1) Screwdriver-Flat Tip 3"x1/8" Mini,(1) Screwdriver-Flat Tip 1 1/2"x1/4",(1)
Screwdriver-Phillips #1 3"Thin Blade,(1) Screwdriver-Phillips #2 8",(1) Screwdriver-Phillips #2 4",(1)
Screwdriver-Phillips #2 2",(1) Plier-Mini Straight,(1) Plier-Cutter Tapered True-Flush,(1) Plier-Needle
Nose Duck Bill Comfort Grip,(1) Plier-Needle Nose With Cutter,(1) Plier-Wire Stripper/Cutter,(1) Retaining
Ring Plier-Fixed Tip Convertib,(1) Wrench-Adjustable Joint/Pipe 4 1/2",(1) Wrench-Adjustable 6",(1)
Wrench Set-Metric Hex 1.5- 5mm,(1) Wrench-Midget Fd 5.5mm 6 Pt,(1) Wrench-Midget Fd 7 mm 12
Pt,(1) Screwdriver-Screw Starter Combination,(1) Feeler Gauge-Metric 0.05-1.00mm,(1) Mirror-Round
Pocket,(1) Level,(1) Brush Sash,(1) Magnetizer/Demagnetizer,(1) Mini Knife,(1) Spring HookPush/Pull,(1) Ruler-Steel Metric 15 cm,(1) Polypropylene Platt Tool Case,(1) Tool Case Pallet Set B
Katun PN Product Description
Pricing Unit
014122
Priced per Kit, 32 Tools per Kit.
Technician Tool Kit - HS
Page 26
Tools, Kits
Technician Tool Kit - Soft Side
The Soft-Sided Technician Kit contains 32 tools and accessories in a Platt zipper case.
Platt Engineer Zipper Tool Case (Katun PN 009113) was designed for light weight durablity.
Kit Contains:,(1) Screwdriver Set-Miniature,(1) Screwdriver-Potentiometer Adjuster,(1) Screwdriver-Ball
Hex Tip 2.5mm,(1) Screwdriver-Ball Hex Tip 2 mm,(1) Screwdriver-Flat Tip 6"x1/4",(1) Screwdriver-Flat
Tip 4"x1/8" Thin Blade,(1) Screwdriver-Flat Tip 3"x1/8" Mini,(1) Screwdriver-Flat Tip 1 1/2"x1/4",(1)
Screwdriver-Phillips #1 3"Thin Blade,(1) Screwdriver-Phillips #2 8",(1) Screwdriver-Phillips #2 4",(1)
Screwdriver-Phillips #2 2",(1) Plier-Mini Straight,(1) Plier-Cutter Tapered True-Flush,(1) Plier-Needle
Nose Duck Bill Comfort Grip,(1) Plier-Needle Nose With Cutter,(1) Plier-Wire Stripper/Cutter,(1) Retaining
Ring Plier-Fixed Tip Convertib,(1) Wrench-Adjustable Joint/Pipe 4 1/2",(1) Wrench-Adjustable 6",(1)
Wrench Set-Metric Hex 1.5- 5mm,(1) Wrench-Midget Fd 5.5mm 6 Pt,(1) Wrench-Midget Fd 7 mm 12
Pt,(1) Screwdriver-Screw Starter Combination,(1) Feeler Gauge-Metric 0.05-1.00mm,(1) Mirror-Round
Pocket,(1) Level,(1) Brush Sash,(1) Magnetizer/Demagnetizer,(1) Mini Knife,(1) Spring HookPush/Pull,(1) Ruler-Steel Metric 15 cm,(1) Zipper Tool Case
Katun PN Product Description
Pricing Unit
009109
Priced per Tool Kit, 32 Tools per Tool Kit.
Technician Tool Kit with Zipper Case
Universal Copier Tool Kit - Hard Side
This hard sided Universal Tool Kit includes 19 tools and accessories in a Platt Polypropylene case.
Platt Polypropylene Case (Katun PN 737615) was designed by service technicians.
Kit Contains:,(1) Screwdriver-Potentiometer Adjuster,(1) Screwdriver-Flat Tip 6"x1/4",(1) Screwdriver-Flat
Tip 4"x1/8" Thin Blade,(1) Screwdriver-Phillips #2 8",(1) Screwdriver-Phillips #2 4",(1) ScrewdriverPhillips #2 2",(1) Plier-Cutter Tapered True-Flush,(1) Plier-Needle Nose With Cutter,(1) Retaining Ring
Plier-Fixed Tip Convertib,(1) Wrench Set-Metric Hex 1.5- 5mm,(1) Feeler Gauge-Metric 0.05-1.00mm,(1)
Level,(1) Brush Sash,(1) Magnetizer/Demagnetizer,(1) Spring Hook-Push/Pull,(1) Spring HookCaptive,(1) Ruler-Steel Metric 15 cm,(1) Polypropylene Platt Tool Case,(1) Screwdriver-Phillips #1 4
13/16" Pocket,(1) Mini Maglite AA,(1) Tool Pallet- Universal
Katun PN Product Description
Pricing Unit
012661
Priced per Kit, 19 Tools per Kit.
Universal Copier Tool Kit
Page 27
Tools, Other Tools and Accessories
Clip Tools
This E-Ring Tool is ideal for removing and installing E-rings. Puller hook retracts into housing when not in
use.
17.3 cm in length.
Katun PN
Product Description
016239
Premium Clip Tool
Dust Blower
This handy Dust Blower tool helps you get to those hard to reach places. Just squeeze to blow debris
away while brushing. 2.8 cm bristles, 13.9 cm total length.
Katun PN
Product Description
009124
Dust Blower
Dusting Brushes
These sash brushes help remove debris in areas that are difficult to access. Medium is 13.9 cm total
length with 3.8 cm bristles and large is 24.1 cm total length with 5.1 cm bristles.
Katun PN
Product Description
009118
017495
Brush Sash
Dusting Brush, Lg. (24.1 cm)
E-ring Tools
This E-Ring Tool is ideal for removing and installing E-rings. Puller hook retracts into housing when not in
use.
17.3 cm in length.
Katun PN
Product Description
009074
Premium Clip Tool
Page 28
Tools, Other Tools and Accessories
File Set
Needle File Set includes twelve 13.9 cm Swiss pattern files in assorted shapes, double cut for sharper,
faster cutting.
Katun PN Product Description
Pricing Unit
017491
Priced per Set, 12 Files per Set.
Needle File Set, 12 pc
Gauges
Feeler Gauge with 20 nonmagnetic blades, from 0.05 mm to 1.00 mm; 7.6 cm overall length.
Katun PN
Product Description
009036
Feeler Gauge-Metric 0.05-1.00mm
Gerber Knives
These L.S.T.® Fine Edge knives by Gerber feature:
• Lightweight synthetic handle
• Tactile texturing on handle
• Lock-back design
• Blade Material: 420HC Stainless Steel
• Handle Material: Glass-filled nylon
• Blade Style: Drop Point
• Blade Type: Fine
Ultralight L.S.T.® Fine Edge
Overall Length: 11.7 cm , Length Closed: 6.7 cm , Length of Blade: 4.9 cm , Weight: 0.6 oz.
PN 012753
L.S.T.® Fine Edge
Overall Length: 15.5 cm, Length Closed: 9.1 cm, Length of Blade: 6.7 cm, Weight: 1.2 oz.
PN 012752
Katun PN
Product Description
012752
012753
A) Pocket Knife
B) Pocket Knife
Page 29
Tools, Other Tools and Accessories
Katun Magnetic Nut Driver
This Katun 5.5mm Magnetic Nut Driver is a must! 5.5mm hexagon head Phillips screws are common in
many office machines from Canon, Ricoh, and others. Katun worked with Wiha to develop this exclusive
nut driver specifically for office equipment technicians to use on service calls. The 25.4 cm blade enables
technicians to reach screws not easily accessible with conventional tools. The large, ergonomic grip
handle requires less force, yet achieves 40% more torque than conventional handles-saving time and
lessening stress on hands and wrists.
• Solid molded core with soft outer cushion grip
• Handle is molded directly to the blade for a permanent bond
• Super-hardened blade for unmatched durability
• Magnetic tip prevents screw loss during service
Katun PN
Product Description
019870
Nut Driver-5.5mm
Knives
Snap-on® Mini Knife
Spring-loaded button adjusts blade to 3 positions. Closed length is 7.9 cm. Snap-on refill blades (5 per
pack) also available.
Victorinox® Swiss Army Knife
Famous premium-quality combination tool with Katun logo on the handle. Made in Switzerland. Closed
length is 7.6 cm.
• Includes large- and small-blade knives, can opener/small screwdriver, bottle opener/large screwdriver,
wire stripper, reamer, Phillips screwdriver, key ring, tweezers, and toothpick.
• All tools are made of premium-quality stainless steel for a lifetime of heavy use.
• Lifetime manufacturer's limited warranty.
Katun PN
Product Description
009065
014497
A) Mini Knife
B) Swiss Army Knife
Page 30
Tools, Other Tools and Accessories
Leatherman® Tools
Leatherman Micra Tool™
So small and lightweight you'll hardly notice it's on hand until you need it. Incorporates 10 useful tools,
including scissors, clip point knife, tweezers, file, Phillips/large flat tip screwdriver, small/medium flat tip
screwdrivers, bottle opener, ruler, and lanyard attachment.
• Closes to just 6.3 cm in length, weighs just 1.5 oz.
• The perfect addition to any key chain.
Leatherman® Wave Tool™
This extremely versatile 100% stainless-steel tool is ideal for professional service engineers. Includes wire
cutters, scissors, screwdrivers, wire strippers, knives, and more. Rounded handles make this the most
comfortable Leatherman tool ever. Made in the U.S.A. and comes with a 25-year guarantee.
• Closes to 10.1 cm; weighs 8 oz.
• Includes 18 highly useful tools.
• Features one-handed locking knife blades.
• Four "outside" blades are accessible without opening the tool.
• Premium nylon sheath included.
Leatherman® Fuse Tool™
Fuse features an all-blades locking system that is 50% stonger than our orginal locks. And one-at-a-time
blade selection gets you just the tool you want. With a slim chassis and an assortment of the mostneeded tools, Fuse puts portability at the forefront of your need to be prepared.
• Closes to 4", weighs 6 oz.
• 100% Stainless Steel (Optimum grade hardness for each tool/blade)
Katun PN
Product Description
026275
015338
026274
C) Leatherman Fuse Tool
A) Leatherman Micra Tool
B) The Leatherman Wave
Level
This handy 12.7 cm long level is pocket sized and a great addition for any tool kit.
Katun PN
Product Description
009117
Level
Page 31
Tools, Other Tools and Accessories
Magnetic Pickup Tool
This 13.3 cm magnetic pickup tool extends to 45.0 cm. Use it to retrieve screws or other small metal
parts. Comes with a pocket clip.
Katun PN
Product Description
009037
Pickup Tool-Telescopic Magnetic
Magnetizer/Demagnetizer
Magnetizer/Demagnetizer (not pictured)
• Attaches to screwdriver to magnetize or demagnetize the tip.
PN 009119
Wiha Magnetizer/ Demagnetizer
• Compact, box-style device works on screwdriver blades and other steel items.
PN 011525
Katun PN
Product Description
009119
011525
Magnetizer/Demagnetizer
Wiha Magnetizer/Demagnetizer
Round Mirror
Pocket Mirror handle extends from 11.4 cm to 43.2 cm. 3.2 diameter mirror. Hinged mechanism allows
360° adjustment. Includes pocket clip.
Katun PN
Product Description
009039
Mirror-Round Pocket
Ratcheting Screwdriver Bits
These replacement bits for the Katun/Snap-on include five Phillips #2 ACR
Katun PN Product Description
Pricing Unit
009806
Priced per Bag, 5 Bits per Bag.
Screwdriver Bit-Phillips #2 ACR
Page 32
Tools, Other Tools and Accessories
Soldering Iron
Compact, CE approved 18-watt soldering iron is highly portable for on-site use. Includes soldering stand.
Katun PN
Product Description
015794
016343
Soldering Iron - 220V/240V (not avail. in UK)
Soldering Iron - 240V (UK only)
Soldering Iron, Gascat 40
The ANTEX Gascat 40 soldering iron and Gascat soldering iron kit are truly portable tools with a variety of
applications. Powered by butane gas lighter fuel (not included), the Gascats avoid the restrictions often
imposed by cables and the availability of suitable electricity supply.
Antex Gascat 40 Gas Soldering Iron
• Portable butane gas soldering iron for on site use
• Thumbwheel ignition
Antex Gascat 40 Gas Soldering Iron Kit
• Kit includes soldering iron, hot knife, two chisel tip attachments and cleaning sponge.
Katun PN
Product Description
022668
022669
Gascat 40 Gas Soldering Iron
Gascat 40 Soldering Iron Kit
Soldering Tools
Soldering Iron and Accessories: Compact 30-watt soldering iron with 152.4 cm cord is portable for on-site
use. U.L. listed
Katun PN
Product Description
009121
012849
Solder Rosin 40/60
Desoldering Tool
Page 33
Tools, Other Tools and Accessories
Spring Hooks
Captive Spring Hook
Spring-loaded hook is exposed by depressing plunger on top of tool. Internal spring retracts hook
automatically. This hook is ideal for capturing corona wires, springs or parts and holding them. 17.8 cm
long .
PN 009072
Premium Push/Pull Spring Hook
Durable, long-life stainless steel construction, with knurled grip to eliminate tool slippage. 20.3 cm in
length.
PN 012845
Katun PN
Product Description
009072
012845
A) Spring Hook-Captive
B) Spring Hook-Push/Pull Premium
Steel Rulers
This Blue-Point 15 cm steel metric ruler by Snap-on is graduated to .5 mm. 15 cm metric ruler.
Katun PN
Product Description
009188
Ruler-Steel Metric 15 cm
Tools, Pliers, Cutters and Wrenches
Pliers - Wrenches
Katun pliers and wrenches offer the right tool for the job.
Katun PN
Product Description
009062
017493
Wrench-Adjustable 15.2 cm
Katun Duck Bill Pliers- 17.8 cm
Page 34
Tools, Pliers, Cutters and Wrenches
Pliers - Retaining Ring
Blue Point Interchangeable Retaining Ring Pliers
PN 009068
Easily converts for internal or external use.
• Five interchangeable tips included for versatility.
• Sizes: 6 mm 0°, .9 mm" 0°, 1.2 mm 0°, and 1.2 mm 90°.
Snap-on Retaining Ring Fixed Tip Pliers
PN 009120
Easily converts for internal or external use.
• 14.6 cm overall length; tip size 0.9 mm.
Snap-on Retaining Ring Fixed Tip Pliers
PN 012101
Ideal for installing and removing internal and external retaining rings. Unique dial feature allows quick
conversion.
• Measures 14.6 cm in length, with an 18° tip angle.
• Spring-loaded to prevent hand fatigue.
Katun PN
Product Description
009068
009120
012101
A) Retaining Ring Plier-Interchangeable Tip
B) Retaining Ring Plier-Fixed Tip Convertib
C) Retaining Ring Plier-Fixed Tip Convertib
Page 35
Tools, Pliers, Cutters and Wrenches
Pliers - Cutters
Blue Point Wire Stripper/Cutter
Strips AWG sizes 10-20, plus 0.80, 1.0, 1.3, 1.6, 2.0, 2.6 mm wire.
PN 009058, 15.2 cm total length.
Snap-on Electronic Service Side Cutter
Tapered, flush-cutting head. Wire spring keeps jaws open to prevent user hand fatigue.
• Blades designed to relieve pressure and extend life of cutting edges.
• Cushioned electrostatic discharge (ESD) handles offer optimum comfort and a slip-resistant grip
PN 010037, 11.1 cm total length.
Katun Electronic Service Cutter and Side Cutter
Premium-quality tools ideal for precision work with small electronic components.
• Recoil spring keeps jaws open to prevent hand fatigue
• Black foam handles offer optimum comfort and a slip-resistant grip
• Made in the USA, lifetime warranty
PN 015534, 11.4 cm total length.
PN 016909, 15.2 cm total length.
Katun Side Cutters
• Heavy-duty stainless steel construction, with polished chrome finish, withstands years of intensive use.
• Specially designed black foam handgrips provide maximum comfort.
• Made in the USA, lifetime warranty
PN 015536, 12.7 cm total length.
Katun PN
Product Description
009058
010037
015534
015536
016909
A) Plier-Wire Stripper/Cutter
E) Plier-Cutter Tapered True-Flush
B) Plier-Cutter with Recoil Spring
C) Plier-Cutter Side
D) Plier-Cutter Extended Reach 14cm
Pliers - Mini
Curved Mini-Pliers or Straight Mini-Pliers made of high-quality stainless steel, with locking grip to grasp
small objects with proper pressure. Forceps style, available in 17.8 cm length.
Katun PN
Product Description
009033
Plier-Mini Straight
Page 36
Tools, Pliers, Cutters and Wrenches
Pliers - Needle Nose
Snap-on Electronic Service Needle-Nose Pliers
Ideal pliers for electrical and electronic work involving small components.
• Perfectly aligned jaw tips and machined teeth provide excellent grip strength and precision.
• Rounded jaw edges loop and bend wire without nicking it.
• Cushioned ESD handles offer optimum comfort and a slip-resistant grip.
PN 009770, 16.7 cm total length, 5.5 cm jaw length
PN 010036, 18.2 cm total length, 5.7 cm jaw length
Katun Electronic Needle-Nose Pliers
Heavy-duty premium-quality tools ideal for precision work with small electronic components.
• Recoil spring keeps jaws open to prevent hand fatigue
• Black foam handles offer optimum comfort and a slip-resistant grip
• Serrated jaws
• Made in the USA, lifetime warranty
PN 015535, 12.7 cm total length
PN 015537, 16.5 cm total length
PN 016910, 15.2 cm total length
Katun PN
Product Description
009770
010036
015535
015537
016910
Plier-Needle Nose Long Serrated
Plier-Needle Nose With Cutter
Plier-Needle Nose With Recoil Spring
Plier-Needle Nose
Plier-Needle Nose Extended Reach 16cm
Pliers-Vise Grip®
Vise Grip® curved, serrated jaw provides amazing grip strength, even on irregularly shaped objects. 3.8
cm jaw capacity, 10.1 cm total length.
Katun PN
Product Description
009038
Plier-Vise Grip Curved Jaw 10.1 cm
Wrench Sets
Bondhus™ Hex Wrench Sets feature ball-type wrenches that easily inserted into hex fasteners at angles
up to 25°. Ideal for applications where many wrench sizes are required. Patented Bondhex™ key case
allows wrenches to slide easily into indexed slots.
PN 012065 9-piece Hex Set (Metric) Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm.
PN 009123 6-piece Hex Set (Metric) Sizes: 1.5, 2, 2.5, 3, 4, and 5 mm.
Katun PN Product Description
Pricing Unit
009123
012065
Priced per Package, 6 wrenches per Package.
Priced per Package, 9 Wrenches per Package.
Wrench Set-Metric Hex 1.5- 5mm
Wrench Set-Metric Hex 1.5-10mm
Page 37
Tools, Screwdrivers
Flat Tip Screwdrivers
Snap-on Flat Tip Screwdrivers
Quality Snap-on flat tip screwdrivers provide superior performance removing and inserting office machine
fasteners. Various tip widths, handles, and blade lengths are available to accommodate different needs.
PN 009049 Flat tip, 6.3 mm tip 15.2 cm 25.4 cm
PN 009050 Flat tip, 3.1 mm tip 10.1 cm 19.0 cm
PN 009051 Flat tip, 6.3 mm tip 3.8 cm 8.2 cm
Katun Screwdrivers
Made from high-strength tempered steel, these high-quality screwdrivers are manufactured by Snap-on
exclusively for Katun. Specially designed handles are perfectly sized according to blade length for
excellent grip and maximum torque. Phillips screwdrivers meet Japanese Industrial Standard (JIS)
specifications, with vaporblasted tips that withstand year after year of intensive use. Lifetime
manufacturer's warranty; made in the U.S.A.
PN 015501 Flat tip 15 cm 27 cm (6.5 mm blade width)
PN 015500 Flat tip 10 cm 20cm (3.5 mm blade width)
PN 015502 Potentiometer 7 cm 15cm (includes Phillips #1)
Katun PN
Product Description
009049
009050
009051
015500
015501
015502
A) Screwdriver-Flat Tip 6"x1/4"
B) Screwdriver-Flat Tip 4"x1/8" Thin Blade
C) Screwdriver-Flat Tip 1 1/2"x1/4"
D) Screwdriver-Flat Tip 100mm x 3.5mm
E) Screwdriver-Flat Tip 150mm x 6.5mm
F) Screwdriver-Flat Tip/Phillips #1
Page 38
Tools, Screwdrivers
Phillips Screwdrivers
Katun Screwdrivers
Made from high-strength tempered steel, these high-quality screwdrivers are manufactured by Snap-on
exclusively for Katun. Specially designed handles are perfectly sized according to blade length for
excellent grip and maximum torque. Phillips screwdrivers meet Japanese Industrial Standard (JIS)
specifications, with vaporblasted tips that withstand year after year of intensive use. Lifetime
manufacturer's warranty; made in the U.S.A.
PN 015496 Phillips #2 4 cm 12 cm
PN 015497 Phillips #2 20 cm 32 cm
PN 015498 Phillips #2 10 cm 20 cm
PN 015499 Phillips #1 7.5 cm 17.5 cm
Snap-on Screwdrivers for the Perfect Fit
Avoid driver camout and stripped screws! American-made Phillips screwdrivers commonly do not meet
the stringent Japanese Industrial Standard (JIS 4633B-3/1991). Most are too large and/or too pointed to
engage properly into Japanese Phillips screw heads. Poor tool-to-screw engagement can produce
frequent driver camout and stripping of screw heads, resulting in lost productivity and increased parts
costs. Katun provides Snap-on screwdrivers that meet all Japanese Phillips specifications, and service
technicians notice the difference. The fit is perfect every time, and Snap-on vapor-blasted screwdriver tips
provide maximum grip within the screw slot. The Snap-on Power Grip handle provides increased torque
and reduces hand fatigue. Because the right tool is the tool best suited for the job, Katun offers Snap-on
screwdrivers-for the perfect fit service technicians deserve Snap-on Phillips Screwdrivers. All handles are
perfectly sized according to blade length, for maximum turning power without slipping or fatigue.
• Heat-treated steel alloy blades with vapor-blasted tips retain their edge and grip.
• Lifetime replacement warranty; made in the U.S.A.
PN 009827 Phillips #2 40.6 cm 30.4 cn
PN 010107 Phillips #2 31.5 cm 20.3 cm
PN 018545 Phillips #2 22.5 cm 10.1 cm
PN 010108 Phillips #2 8.25 cm 3.8 cm
Katun PN
Product Description
009827
010107
010108
015496
015497
015498
015499
A) Screwdriver-Phillips #2 12"
B) Screwdriver-Phillips #2 8"
C) Screwdriver-Phillips #2 2"
D) Screwdriver-Phillips #2 40mm
E) Screwdriver-Phillips #2 200mm
F) Screwdriver-Phillips #2 100mm
G) S crewdriver-Phillips #1 75mm
Potentiometers Adjusters
Potentiometer Adjuster Screwdriver, flat tip, black handle. 3 mm tip, 13.9 cm. Features a pocket clip. Use
for adjusting potentiometers only. Made by Snap-on with high tempered steel.
Katun PN
Product Description
009843
Screwdriver-Potentiometer Adjuster
Page 39
Tools, Screwdrivers
Ratcheting Screwdrivers
These high-productivity tools feature stainless steel shanks and Snap-on Power Grip handles engineered
for the intensive use required in office equipment service. Service technicians will appreciate the many
performance features, including magnetic bit retention, Japanese-compliant Phillips® tips with anti-camout
ribs (ACR®), and a non-slip, knurled shank area. These screwdrivers adjust easily to drive or remove
screws with the same smooth ratcheting action in either direction: the 26-tooth gear mechanism yields a
new bite every 13.8 degrees. For the most stubborn fasteners, the locked position allows the manual
torque of a conventional screwdriver. Convenient hollow handle stores all five screwdriver bits.
Katun/Snap-on Magnetic Ratcheting Screwdrivers with Bits.
Bits included:
• One Phillips #1 ACR.
• One Phillips #2 ACR.
• One TORX T15.
• Two flat tip: 3 16," 9 32".
PN 009075 Magnetic ratcheting 9.6 cm 22.2 cm screwdriver
Katun/Snap-on Magnetic Ratcheting Screwdrivers with Bits
Bits included:
• One Phillips #1 ACR.
• One Phillips #2 ACR.
• One TORX T15.
• Two flat tip: 3 16," 9 32".
PN 009081 Long magnetic 18.8 cm 33.0 cm
Katun PN
Product Description
009075
009081
A) Screwdriver-Magnetic Ratcheting 4"
B) Screwdriver-Magnetic Ratcheting Long
Page 40
Tools, Screwdrivers
Screwdriver Sets
Screw Starter
Combination tip style has spring-loaded steel bits that grip slot walls to withstand an 8 lb. pull. Overall
length 5 7 8".
PN 009035
Precision Screwdriver Set
Four slotted and two Phillips (#0, #00) screwdrivers in a handy storage case.
PN 009057
Wiha 7-piece Combination Micro Screwdriver Set
Precision screwdrivers specifically designed for miniature screws commonly found in electronic
equipment. Includes four slotted and three Phillips (#1, #0, #00).
PN 011523
Offset Screwdriver Set
Three-piece set includes reversible ratchet handle, 3 16" slotted tip and #2 Phillips tip.
PN 017492
Katun PN Product Description
Pricing Unit
009035
Each
009057
011523
017492
A) Screwdriver-Screw Starter
Combination
B) Screwdriver Set-Miniature
C) Screwdriver Set-Combination 7 Pcs
D) Screwdriver Set-Offset
Priced per Set, 5 Screwdrivers per Set.
Priced per Set, 7 Screwdrivers per Set.
Priced per Set, 3 pcs per Set.
Vacuums, Accessories
3M™ Vacuum Accessories
3M Brand Vacuum Accessories are designed to perform their intended tasks safely and efficiently, and
are constructed of durable materials that withstand intensive use. Attachments fit all 3M, Ultivac, and Atrix
service vacuums. 3M needle-nose nozzle is excellent for reaching into narrow crevices. 3M curved wand
nozzle is Ideal for cleaning small, tight areas. 3M crevice brush fits onto crevice nozzle for loosening dirt
and debris. 3M dusting brush stiff bristles enable fast cleaning without abrasion. 3M replacement hose,
78.7 cm top quality flexible hose stretches to 2.1 m in length while the 3M replacement hose, 127 cm (PN
737787) even greater cleaning reach with hose that stretches to 4.8 m.
Katun PN
Product Description
010043
016982
016983
016984
016985
016987
016988
016989
016990
016993
018549
737787
A) Needlenose Nozzle- Static Dissipative
3M Vacuum Carrying Strap
B) 3M Vacuum Wand Nozzle
Curved Wand Nozzle
C) Crevice Nozzle
D) Stretch Hose (81,2 cm)
3M Vacuum On/Off Switch
3M Vacuum Handle
3M Vacuum Latch
3M Vacuum Power Cord, Std 8 Ft
Replacement Dusting Brush
Replacement Hose Assembly (127 cm)
Page 41
Vacuums, Accessories
Jr. Vacuum Carrying Cases
New! Tote bag for Ultivac Jr. Vacuum! This bag is a convenient option for carrying the Jr. Vacuum and
accessories. Features a shoulder strap for easy transport.
Katun PN
Product Description
027740
Ultivac Jr. Tote Bag
Ultivac Vacuum Accessories
Atrix Service Vacuum Accessories are designed to perform their tasks safely and efficiently, and are
constructed of durable materials that withstand intensive use.
Katun PN
Product Description
021878
737782
Ultivac Cover Assembly
Replacement Hose Assembly
Vacuum Carrying Cases
Vacuum Carrying Case for use with UltiVac, 3M, and other service vacuums. This heavyduty black
polyester case has a special vinyl-coated interior to prevent toner contamination. Includes comfortable
shoulder strap and space for storage of manuals, paperwork, and supplies.
• Service vacuum carrying case is 66.0 x 19.0 x 24.1 cm.
• Carrying vacuums fully assembled saves valuable service time.
Katun PN
Product Description
014449
Service Vacuum Carrying Case-Large
Page 42
Vacuums, Filters
3M Electronics Vacuum
The 3M Electronic Vacuum is a powerful unit designed for high efficiency cleanup of most business
equipment. Portability, quick setup and efficient safe operation are key features. The 3M Electronics
Vacuum is constructed with electrostatic dissipative plastic, reducing the risk of damage to sensitive
electronic equipment. In addition, it offers added protection for RF susceptible components found inside
copiers, printers, and other office equipment. Normally, the equipment's metal cabinet provides shielding
protection for these components, but the components are exposed when the cabinet is opened for
cleaning. The 3M Electronics Vacuum RFI filter provides an additional level of safety. Comes complete
with Type 2 filter, detachable power cord, 79 cm stretch hose, crevice brush and nozzle, dusting brush,
needle nose nozzle and curved wand nozzle. Three year warranty.
Model 497ABF, 220V, 50/60 Hz, 5.0 amps
Dimensions:
Length . . . . . . . . . . 45.2 cm
Width . . . . . . . . . . . . 21 cm
Height . . . . . . . . . . . . 23.5 cm
Weight . . . . . 4.5 kg
Katun PN
Product Description
017241
3M Electronics Vacuum, 220V
3M Field Service Vacuum
3M Field Service Vacuum is the service engineer's choice for efficient cleanup. Portability, quick setup,
and efficient, safe operation are key features of this powerful vacuum. The power cord, stretch hose, and
all other attachments fit easily into the cover compartment for rapid access. The extendable hose allows
the operator to clean large machines and hard-to-reach areas without lifting the vacuum. 3M's
technologically advanced vacuum materials dissipate electrostatic buildup, reducing the risk of shock
damage to sensitive electronic equipment-and protecting the service technician from electrostatic
discharge. The 1 HP motor is continuous duty rated with one sealed ball bearing and one sleeve bearing
lubricated for life. Thermally protected with automatic reset. Comes complete with Type 2 filter,
detachable power cord, 79 cm stretch hose, crevice brush and nozzle, and curved wand nozzle.
Three year warranty.
Model 497AJ, 220 VAC, 50/60 Hz, 5.0 amps
Dimensions:
Length . . . . . . . . . . 42.2 cm
Width . . . . . . . . . . . 19.8 cm
Height. . . . . . . . . . . . 23.6 cm
Weight . . . . . . . . . . . 4.5 kg
Katun PN
Product Description
737710
3M Field Service Vacuum Cleaner, 220V
Page 43
Vacuums, Filters
3M™ Vacuum Filters
3M offers two filter types to meet all cleaning needs. Different fibers and weaves are designed to trap
various particle types. Choosing the right filter type can also optimize vacuum suction and prevent blowby (passing of particles back into the air and onto work surfaces). 3M configures filters with thin fibers in
two different weaves to trap specific sizes of particles, and designs filter cartridges for easy installation
and safe disposal.
Type 1 - Fine Particle Filter
A highly concentrated weave (HEPA media) traps extremely fine particles. The Type 1 filter is designed
for cleaning color laser printers, color copiers, and other highly sensitive machines that utilize toners of
extremely fine particle size.
Type 2 - Toner/Dust Filter
The Type 2 filter efficiently traps toner used in standard copiers and laser printers. It is also ideal for
cleaning typewriters and data processing equipment. Type 2 is the standard filter type included with all 3M
service vacuums.
Katun PN
Product Description
737708
737731
Type 1 3M Vacuum Cleaner Filter
Type 2 3M Vacuum Cleaner Filter
Atrix High Capacity Vacuum
Atrix High-Capacity Service Vacuum is designed for durability under intensive use. This powerful 1 HP
vacuum is equipped with an extra-large filter cartridge for nonstop collection of large amounts of black and
color toner. Cart with ball bearing wheels enables easy mobility, and can be detached when necessary to
save floor space. Full range of attachments includes flexible wand tool, crevice tool with detachable
brush, and toner-proof hose that stretches to 10 feet in length.
• UL listed; 50/60 Hz, 7.0 amps.
• 100% static grounded for safe operation.
• Convenient foot switch (115 VAC only) and detachable 6 foot power cord.
• Eighteen-month manufacturer's warranty.
Katun PN
Product Description
014464
HCTV Vacuum Cleaner-230V, 5 Gallon
Atrix High Capacity Vacuum Filter
Unique 5-gallon style canister filter seals quickly for disposal, and holds large quantities of debris. This
filter is for use with the Atrix High Capacity Toner Vacuum, Katun part # 014464.
Katun PN
Product Description
014455
HCTV Vacuum Filter, 5 Gallon
Page 44
Vacuums, Filters
Omnifit® Vacuum Filters
Katun OmniFit® Filters are universal filters designed to trap toner, dust, and other particles and fit
UltiVac™ and UltiVac Deluxe™ vacuums.
• Standard filter rated 99.5% efficient for particles 2.0 micrometers and above. Excellent for black toner
filtration. PN 737781
• High-performance filter rated 99.99% efficient for particles 0.9 micrometers and above. Excellent for
color toner filtration. PN 000106
• Omnifit® HEPA filters are true HEPA filters that are 99.97% efficient at 0.3 microns. PN 014507
Katun PN
Product Description
000106
014507
737781
A) Omnifit High Performance Filter
B) Omnifit Hepa Filter
C) Omnifit Filter Cartridge
Ultivac Deluxe Vacuum Cleaner
UltiVac DLX Vacuum's extremely quiet operation (10-20% more quiet than other service vacuums) makes
this deluxe 1 HP vacuum ideal for use in noise-sensitive office environments. All attachments fit into the
cover compartment for fast, convenient access. Includes flexible wand tool, crevice tool with detachable
brush, toner-proof stretch hose, and OmniFit standard toner filter.
• 100% static-grounded for safe operation.
• Durable hinges, latches, and styrene case ensure impact resistance and long life.
• Eighteen-month manufacturer's warranty.
Katun PN
Product Description
014466
UltiVac Deluxe Vacuum Cleaner-230V
Ultivac Jr.® Filters
UltiVac Jr. Filters are specially designed for use in the UltiVac Jr. vacuum. The plastic filters are excellent
for black and color toner filtration, and the HEPA filters are safety-rated to clean ultra fine toner. The
standard filter has a 0.3-micrometer retention capability for effective office equipment cleanup.
• Safe and easy to use.
• HEPA filters include sealing plug for clean disposal.
Katun PN Product Description
Pricing Unit
013280
021361
Priced per Box, 2 Filters per Box.
Priced per Box, 2 Hepa Filters per Box.
Ultivac Jr. Filter Cartridge
Ultivac Jr. HEPA Filter (2-Pack)
Page 45
Vacuums, Filters
Ultivac Jr. Vacuum
UltiVac Jr. Vacuum, a highly portable, versatile vacuum provides powerful (.8 HP) office equipment
cleanup but weighs only 2.7 kg and measures a compact 30.4 x 15.2 x 17.8 cm. Includes crevice tool,
brush, flexible wand tool, a standard UltiVac Jr. filter, and toner-proof stretch hose for cleaning hard-toreach areas.
• 100% static grounded for safe operation.
• Eighteen-month limited manufacturer's warranty.
Katun PN
Product Description
021364
UltiVac Jr. Vacuum Cleaner-230V
Ultivac Service Vacuum Cleaner
The UltiVac™ Service Vacuum delivers powerful, cost-effective performance in a fully featured vacuum
that is Ideal for office equipment cleanup. The portable, highly affordable UltiVac service vacuum- now
designed with more durable latches and hinges, and rounded vacuum case corners for years of intensive
use is ideal for virtually any office equipment cleanup task. Its efficient 1.18 HP motor provides sufficient
power for demanding cleaning tasks, and the expandable stretch hose and flexible wand tool effectively
reach hard-to-clean areas. All attachments fit into the case cover for fast, convenient access. UL listed;
50/60 Hz, 5.0 amps. Comes complete with detachable power cord, flexible wandtool, crevice tool with
detachable brush, toner-proof stretch hose (extendible from 76.2 to 182.8 cm), and OmniFit standard
toner filter. Disposable filters are available in a choice of two types to fit your specific application. An
OmniFit standard filter is included with this vacuum. Toner-proof stretch hose extends from 76.2 cm to
182.8 cm. While compact for easy storage, it will reach into large machines without lifting the vacuum.
Static-dissipative attachments include a crevice tool, flexible wand tool, and a brush to loosen toner and
dust particles.
• Durable hinges, latches, and styrene case ensure excellent impact resistance and long life.
• 100% static grounded for safe operation.
• Eighteen-month manufacturer's warranty.
• Measures 49.5 x 17.8 x 24.6 cm; weighs 4.5 kg.
• Heavy-duty latches and hinges are designed to withstand years of intensive use.
• 1.18 HP motor provides efficient, powerful cleaning.
Katun PN
Product Description
014467
UltiVac Service Vacuum Cleaner-230V
Page 46
Table of Contents
Fuser Film Grease
3
3M Electronics Vacuum
3M Field Service Vacuum
3M Tape
3M™ Scour Pads
3M™ Vacuum Accessories
3M™ Vacuum Filters
43
43
14
13
41
44
G
23
23
2
2
3
3
3
44
44
K
A
Advanced Tool Kit - Deluxe Hard Side
Advanced Tool Kit - Hard Side
AF Isoclene
AF Platenclene
AF Screen-Clene
AF Spray Duster
AF Staticlene
Atrix High Capacity Vacuum
Atrix High Capacity Vacuum Filter
Gauges
Gerber Knives
D
Deluxe Technician Tool Kit w/Case
Dexwet Filters
Disposable Gloves
Drop Cloths
Dust Blower
Dusting Brushes
Dust-Off® Jr.
Dust-Off® Plus Gas Cleaner
Dust-Off® XL Cleaner
24
12
14
11
28
28
3
4
4
Electrolube
Energizer® Batteries
E-ring Tools
Essential Copier Tool Kit - Tools Only
Essential Tool Kit - Hard Side
Essential Tool Kit - Soft Side
4
1
28
24
25
25
File Set
Filters
Flashlights and Accessories
Flat Tip Screwdrivers
Foamclene
29
12
13
38
5
E
F
13
Jr. Vacuum Carrying Cases
42
Katun Anti-Static Glass Cleaner
Katun Foam Cleaner
Katun Formula K
Katun Fuser Roller Cleaner
Katun Magnetic Nut Driver
Katun Performance All Purpose Lubricant
Katun Performance Drum Cleaner
Katun Performance Drum Supplies
Katun Spray Duster
Katun Test Patterns
Katun Work Mat
Knives
Kresto® Cleaner
1
1-2
21
21
10
2-8
9
10
10
10
11
10-12
28
14
9
Hardware Kit
J
C
Carts
CH Ellis Sectional Zipper Tool Case
CH Ellis Tool Case
Charge Roller Wpies
Chemicals, Cleaners and Degreasers
Chemicals, Lubricants
Chicopee Cleaning Cloths
Chicopee Soft Cloths
Chix Dura Wipes®
Chux® Wipes
Cleaning Cloths
Clip Tools
Compartment Boxes
Cyanolube Adhesive
29
29
H
B
Batteries
9
5
5
6
6
30
9
6
9, 14
7
18
15
30
7
L
Label Remover
Leatherman® Tools
Level
7
31
31
M
Mag-Lite
Magnetic Pickup Tool
Magnetizer/Demagnetizer
Master Technician Tool Kit
Miscellaneous Supplies and Accessories
Multimeters and Testers
Multi-Purpose Grease
13
32
32
26
13-15
16-18
7
N
Norris 230 Multi-Purpose Cart
Norris 420 Muliti-Purpose Cart
Norris 700 Super Cart
1
1
2
O
Oilers - Precision
Omnifit® Vacuum Filters
15
45
Permaguard
Phillips Screwdrivers
Plastic Bottles
Plastic Grease
Platt Advanced Zipper Case
Platt Laptop/Notebook Case
Platt Polyethylene Tool Case
Platt Polypropylene Tool Case
Platt Polypropylene Tool Case w/Divider
Platt Soft Sided Tool Case
Platt Supervisor’s Tool Case
Platt Tool Pallets
Pliers - Cutters
Pliers - Mini
Pliers - Needle Nose
8
39
15
8
21
22
18
19
19
22
19
20
36
36
37
P
Table of Contents
P
Pliers - Retaining Ring
Pliers - Wrenches
Pliers-Vise Grip®
Potentiometers Adjusters
35
34
37
39
R
Ratcheting Screwdriver Bits
Ratcheting Screwdrivers
Round Mirror
32
40
32
Screwdriver Sets
Soldering Iron
Soldering Iron, Gascat 40
Soldering Tools
Spring Hooks
Steel Rulers
41
33
33
33
34
34
S
T
Technician Tool Kit - Hard Side
Technician Tool Kit - Soft Side
Test Patterns
Tool Case Replacement Parts
Tools, Hard Sided Cases
Tools, Kits
Tools, Other Tools and Accessories
Tools, Pliers, Cutters and Wrenches
Tools, Screwdrivers
Tools, Soft Sided Cases
Tools, Tool Cases and Pallets
Triplett Model 1101-A
Triplett Model 9005
Triplett Model 9015
Triplett Model 9045
Triplett Test Leads
Trolley Laptop/Tool Case
26
27
18
20
18-19
23-27
28-34
34-37
38-41
21-22
20
16
16
17
17
18
20
U
Ultivac Deluxe Vacuum Cleaner
Ultivac Jr. Vacuum
Ultivac Jr.® Filters
Ultivac Service Vacuum Cleaner
Ultivac Vacuum Accessories
Ultraclens
Universal Copier Tool Kit - Hard Side
45
46
45
46
42
8
27
V
Vacuum Carrying Cases
Vacuums, Accessories
Vacuums, Filters
42
41-42
43-46
W
Webril® Cleaning Pads
Wrench Sets
Wypall Cleaning Cloths
11
37
12
Katun & Platt Cases
A Great Combination!
Does your
electronic
equipment
need a
check-up?
Let Our Family of Products
Be Your Electronics
Healthcare Provider!
We Clean it All! From computers and
printers to phones, TVs, DVD players,
stereos and cameras, our products get rid
of harmful dust and dirt that could put at
risk the valuable assets stored within the
workings of your equipment. Dust-Off
has a complete line of dusters to keep
all your home and office equipment
in top condition.
Keep it Clean. Keep it New. Keep it Dust-Offf .
www.plattcases.com
For A Cleaner
Office Environment
Innovative Dexwet Filters reduce
ultrafine dust emissions from
today’s most popular copiers, laser
printers and MFPs
Dexwet Filters
■
■
■
Reduce fine dust emissions from toner-based laser
devices by up to 92%
Unique, certified, patented* technology
Easy to install and replace!
PN 34490
Dex 2000 Filter
PN 34489
Dex 1000 Filter
*Dexwet has the following patents: US 000006375717, US 000006726749, CA 000002409456, EP 000001345669, DE 000060037683
The Quality Choice in Field Service Vacuums
The UltiVac® & OmniFit® Filter
The Katun OmniFit® Filters
are Available in Three
Options:
■ Standard .5 Micron - PN 737781
Ideal for Black Toner
■ High Performance .3 Micron PN 106
Ideal for Black & Most Color Toner
■ Quieter than Most Field Service Vacuums
■ Standard Filter is 25% More Efficient than Others
■ ESD Safe Hose Available in 1.8 m & 3 m Options
■ HEPA Filtration - PN 14507
Good for All Toner, Mold Spores
& Chemical Spills
UltiVac® PN 14467 • UltiVac Deluxe® PN 14466
New...MORE POWERFUL & Quieter
High Capacity Toner Vacuum
by Atrix International
HCTV Katun PN 14464 • Filter Katun PN 14455
The Best Has Become Better
By Atrix—The ULTRA FINE
vacuum cleaner company!
UltiVac Jr. Vacuum PN 21364
UltiVac Jr. Filter
Cartridge (2-pack) PN 13280
UltiVac Jr. HEPA
Filter Cartridge
(2-pack) - PN 21361
Ideal fo
r
Recycle
rs and
Print S
hops