lumox - Sarstedt
Transcription
lumox - Sarstedt
lumox ® Film-based cell culture systems lumox® Film-based cell culture system The lumox® cell culture products stand out for their ultra-thin, gas-permeable film base. As a result of the special film base design, lumox® products show a very low autofluorescence and a high transparency for exceptionally good microscopy behaviour. The range of applications of the lumox® products extends from tissue cultures to automated analysis of fluorescencebased cell assays for active substance testing. s Low autofluorescence s High transparency s Ideal for microscopy s Gas-permeable film base s Optimal growth Optical properties Low autofluorescence and high light transmission ® Compared to standard polystyrene bases, the lumox® film base shows a lower autofluorescence (Fig. 1) and has a higher light transmission (Fig. 2) than polystyrene or glass bases. The low autofluorescence of the lumox film and the good light transmission enable a consistently high sensitivity for assays, imaging and reader techniques. Fig. 2: Light transmission measurement. Detection of low signals, especially at wavelengths of 200 to 300 nm. Transmission (%) relative fluorescence (RFU) Fig. 1: Fluorescence measurement of lumox® film and polystyrene bases at 330 nm lumox® film Polystyrene base Glass base ® lumox film Polystyrene base Emission filter (nm) Wavelength (nm) Double fluorescence staining of endothelial cells The superior chemical resistance of the lumox® film enables a multitude of fixation and staining steps without impairing its low autofluorescence. In double fluorescence staining of human endothelial cells, endothelial cell markers, e.g. Willebrand factor and CD31, are shown clearly and unaffected by additional signals. lumox® Cells simply grow better The gas-permeable quality of the lumox® film base provides a range of advantages. Cells grow directly at the border between the gaseous and liquid phase where the culture medium cannot function as a diffusion barrier. While the cells are directly supplied with oxygen, metabolic waste products like CO2 can simultaneously escape. Exceptionally short diffusion paths ensure an optimal gas exchange. Fig. 3: Gas-exchange directly through the lumox® film base Fig. 4: No gas-exchange in standard tissue culture vessels through the polystyrene base or glass base NEW! lumox® multiwell s The multiwell plate with low autofluorescence lum lumox® multiwell plates consists of a black polystyrene frame (standard dimensions) with a transparent base made from the ultra-thin (50 μm), gas-permeable lumox® film. Available in 24-well, 96-well and 384-well format. Order No. 94.6000.014 Description lumox® multiwell, 24-well ® Surface Growth Area per Well Working volume per Well Packaging pcs./case Standard 190 mm2 500 - 1500 μl 4 2 500 - 1500 μl 20 94.6110.024 lumox multiwell, 24-well Standard 94.6000.024 lumox® multiwell, 96-well Standard 34 mm2 25 - 340 μl 4 2 ® 190 mm 94.6120.096 lumox multiwell, 96-well Standard 34 mm 25 - 340 μl 20 94.6000.034 lumox® multiwell, 384-well Standard 11 mm2 10 - 130 μl 4 94.6130.384 lumox® multiwell, 384-well Standard 11 mm2 10 - 130 μl 20 lumox® dish s The gas-permeable cell culture dish lumox® dish is available in a diameter of 50 and 35 mm. With a choice of hydrophilic or hydrophobic properties, lumox® dish is ideal for cultivation of adherent cells or suspension cells. Order No. Description Ø/Height in mm Surface Working volume Packaging Bag/Box 94.6077.305 lumox® dish 50 50/12 Suspension culture 5-10 ml 50 94.6077.410 lumox® dish 50 50/12 Standard 5-10 ml 50 ® 94.6077.333 lumox dish 35 35/6 Suspension culture 2.5 ml 50/250 94.6077.331 lumox® dish 35 35/6 Standard 2.5 ml 50/250 You may also be interested in the following subjects ... Cell and Tissue Culture CryoPure Storage System Cell Cultivation, Cryogenic Storage, Filtration, Liquid Handling Energizing your Cryopreservation miniPERM® Bioreactor for protein production Efficient and reliable cryopreservation 1 Order Number: 20.215 x-well Cell Culture Chambers Order Number: 20.417 Order Number: 20.512 ! quadriPERM ® ! flexiPERM ® W NE Parallel cell culture on up to 4 slides W NE Reusable tissue culture insert Flexible tissue culture insert flexiPERM® is a reusable silicone insert to subdivide slides and cell culture dishes, e.g. lumox® dish 50 or any other cell culture dish, into smaller cultivation units. 1 5 The highly adhesive flexiPERM® bottom adheres to all plain surfaces such as glass, foil and plastic material. s Autoclavable tissue culture chamber from silicone 2 s Highly adhesive to all plain surfaces (glass, foil, plastic) 4 3 s Cell cultivation, fixation and coloration s Suitable for DIN slides s Compatible with flexiPERM® slide and micro12 with i h or without i h t slide lid Slides made from a variety of materials, PCA, glass and coverglass (170μm), in combination with a polystyrene frame are shaped as one- or multi-chamber vessels with different growth surfaces. The product range includes options in a flask or 1, 2, 4, or 8 well format. s Range of surfaces and formats s Excludes cell transfer from large cell culture vessels to slides for microscopical applications 550b-200-0712-0113 Tissue culture dish for parallel analyses In quadriPERM® cells for cultivation can be easily and quickly supplied with fresh medium, and the particular cell growth can be microscopically analysed. The rectangular, compartmentalized cell culture dish is designed to accommodate four DIN slides (26 x 76mm). Applications quadriPERM® is especially suited for in-situ preparation of chromosomes by cytogenetic analyses, e.g. replication studies, immunofluorescence tests (FISH), and cytoskeleton staining. The four compartments of identical size enable parallel cell cultivation under identical conditions. While suspension cells can be cultivated directly in the tissue culture dish, adherent cells are cultivated in combination with coated or non coated slides. In quadriPERM® the cells can be fixed, stained and tagged immunohistologically. Accordingly, the cells can be used for all molecular, genetic and immunological detection methods. quadriPERM® in combination with flexiPERM® slide and flexiPERM® micro12 s Reduced consumption of media and reagents Ordering Information Order No. Working Volume per Unit 94.6077.307 abt. 10 ml 48 94.6077.308 abt. 10 ml Packaging 192 Order Number: 20.529 SARSTEDT AG & Co. P.O. Box 12 20 D-51582 Nümbrecht Phone +49 2293 3050 Fax +49 2293 305- 122 [email protected] www.sarstedt.com Order Number: 20.536 flexiPERM® slide 1 with eight and flexiPERM® micro12 2 with twelve subdivisions are suited for parallel analyses of cells on DIN slides. In addition, these two versions can be used in combination with quadriPERM® with or without a slide. flexiPERM® conA and flexiPERM® conB flexiPERM® conA physiology. 3 and flexiPERM® conB 4 are designed for special cell culture analyses in animal and plant The cone-shaped form provides numerous applications in micromanipulation/microinjection. Intra- or intercellular measurements can be performed in parallel microscopic observation. 536c-200-0712-1012 s PCA options with detachable slide leaving no adhesive residues This document may contain information on products that may not be available in particular countries Technical modifications reserved s Excellent microscopic properties Easy handling Technical modifications reserved The x-well cell culture system includes slide-based cell culture vessels for high-resolution microscopy. This document may contain information on products that may not be available in particular countries Slide-based cell culture vessels s Subdivision of slides and Petri dishes etc. into several growth areas flexiPERM® slide and flexiPERM® micro12 flexiPERM® disc The flexiPERM® disc 5 subdivided into four compartments is the ideal insert for the gas-permeable lumox® dish 50 or any cell culture dish of 50 mm diameter. flexiPERM® disc can be used for co-cultivation of different cell lines in one vessel. * flexiPERM® can be autoclaved at 121°C for 20 min. without loss of its mechanical properties. Users must determine if the intended application will have any adverse effect on other product properties. Ordering Information Order No. Description Fig. Cultivation Units Cultivation Area per Unit Packaging 94.6011.436 94.6032.039 94.6034.067 94.6077.434 94.6077.435 flexiPERM® micro12 flexiPERM® slide flexiPERM® disc flexiPERM® conA flexiPERM® conB 2 4 12 8 4 1 1 0.3 cm2 0.4 cm2 1.8 cm2 1.1 cm2 3.1 cm2 5 5 5 5 5 1 5 3 SARSTEDT AG & Co. P.O. Box 12 20 D-51582 Nümbrecht Phone +49 2293 305-0 Fax +49 2293 305-122 [email protected] www.sarstedt.com Order Number: 20.536