Three Phase Squirrel Cage Non-sparking Motors Dust

Transcription

Three Phase Squirrel Cage
Non-sparking Motors
Dust Ignition Proof Motors
B5N - B5A SERIES
71 - 500 SIZES
LOW VOLTAGE
ASI.CT.048.0 GB
your partner in power technology
INDEX
GENERAL INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
European Directives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Aspects of Atex Directive & Markings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Explosive atmosphere and dangerous areas classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Classification of explosive atmosphere according to IEC/EN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
EPL Equipment Protection Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Equipment classification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Marking of equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
TECHNICAL SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Insulation class F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Temperature rise compatible with class B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation 1000 m a.s.l.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mountings and Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Balancing and vibration grades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Sound levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Degree of protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Protective Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Terminal box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ELECTRIC DATA TABLES - MAINS SUPPLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
40°C 2-4-6-8 poles - 400 V - 50 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ELECTRIC DATA TABLES - MAINS SUPPLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
55°C 2-4-6-8 poles - 400 V - 50 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ELECTRIC DATA TABLES - MAINS SUPPLY IE2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
40°C 2-4-6-8 poles - 400 V - 50 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ELECTRIC DATA TABLES - INVERTER SUPPLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
40°C 2-4-6-8 poles - 400 V - 50 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
B3 mounting 71-132 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
B35 mounting 71-132 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
B5 - B14 - V1 mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
B3 mounting 355-500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
B35 mounting 355-450. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
V1 mounting 355-450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
TOLERANCES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ROUTINE, TYPE AND SPECIAL TESTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1
GENERAL INFORMATION
Standards
MarelliMotori refers to the IEC and EN standards which have been recently updated.
Standards for non-sparking atmosphere
Rating and Performance
IEC 60034 - 1
Classification of degrees of protection (IP code)
IEC 60034 - 5
Methods of cooling (IC code)
IEC 60034 - 6
Classification of type of construction and mounting arrangement (IM code)
IEC 60034 - 7
Terminal markings and direction of rotation
IEC 60034 - 8
Noise limits
IEC 60034 - 9
Starting performance of rotating electrical machines
IEC 60034 - 12
Mechanical vibration
IEC 60034 - 14
Relation between sizes and ratings of three-phase, short-circuit surface-cooled electric motors
IEC 60072 - 1
Dimensions and outputs for electrical machines
IEC 60072 - 2
Electrical apparatus for potentially explosive atmospheres – general requirements
EN 60079 - 0
Non Sparking “nA”
EN 60079 - 15
Equipment dust ignition protection by enclosure “t”
EN 60079 - 31
European Directives
Marelli Motori motors fully comply with the following directives.
European directives
Directive for Explosive Atmospheres (ATEX)
94/9/EC
Electromagnetic Compatibility (EMC)
2004/108/EC
Low Voltage Directive (LVD)
73/23/EEC
Machinery Directive
2006/42/EC
General Aspects of Atex Directive & Markings
The directive 94/9/EC (95) and 1999/92/EC (137), better known as ATEX from the French term ATmospheres EXplosibles, is a European Community Directive,
which defines the minimum health and safety requirements for apparatus intended for use in potentially dangerous environments. The directive is adopted by the
European Union (EU) to facilitate free trade in the EU of products to which the Directive applies.
It conforms to the safety demands in essence by:
• the application of harmonised specific standards;
• the EC-type examination of products from a notified body, resulting in the appropriate certification;
• the manufacture of the product under a quality management system approved by a notified body.
The responsibilities are divided in two between the manufacturer and the end user: the first has to comply with the requirements of the ATEX 95 directive, the
second must define the risk of its working environment and equipment and make an Explosion Protection Document, based on the requirements of ATEX 137
directive.
In order to use electrical equipment in a potentially explosive atmosphere, such as combustible air-gas mixture or combustible or conductive dust, the
environment must first be classified in accordance with standard EN 60079-10 (gas) and EN 61241-1 (dust) and with its related guide.
This classification, which must be carried out by qualified and competent professionals, identifies the following characteristics, valid for equipment to be used in a
given application:
• the group of equipment;
• the category;
• the protection method;
• the temperature class, or the maximum surface temperature.
Definitions
Explosive atmosphere
A mixture of flammable substances in the state of gas, vapour, mist and dust with air; in which, after ignition, combustion spreads throughout the unconsumed
mixture.
Potentially explosive atmosphere
An atmosphere that could become explosive either as a result of local and/or operating environmental conditions. The ATEX directive applies to products for use in
this environment.
2
Explosive atmosphere and dangerous areas classification
Dangerous environments are classified by zone, according to the risk generated by explosive gas or dust in the atmosphere.
ZONE 1/21
INCIDENTAL PRESENCE
ZONE 2/22
ACCIDENTAL PRESENCE
of explosive atmosphere
during normal operation
(10-1000 h per year)
of explosive atmosphere not
(<= 10 h per year)
II2 G Ex d/Ex de
II 2 G Ex e
II 2 G Ex p
II 2 D Ex tD A21
II 3 G Ex nA
II 3 D Ex tD A22
ZONE 0/20
CONTINOUS PRESENCE
of explosive atmosphere
(> 1000 h per year)
Classification of explosive atmosphere according to IEC/EN
The classification of areas according to the presence of atmosphere are based on the following standards:
• EN 60079-10-1 Gas
• EN 60079-10-2 Dust
Zone
Gas
Dust
0
20
1
2
21
22
Presence of potentially explosive atmosphere
Always present, frequent or long lasting periods during normal operation.
The use of electric motors is not allowed.
Incidental presence: likely to occur during normal operation of the equipment.
Accidental presence: unlikely to occur during normal operation of the equipment.
EPL Equipment Protection Level
Level of protection assigned to equipment based on its likelihood of becoming a source of ignition and distinguishing the differences between explosive gas
atmospheres, explosive dust atmospheres and the explosive atmospheres in mains susceptible to firedamp.
• Gb for explosive gas atmospheres having a “high” level of protection, which is not a source of ignition in normal operation or during expected malfunctions.
• Gc for explosive gas atmospheres having a “enhanced” level of protection, wich is not a source of ignition in normal operation and which may have some
additional protection to ensure that it remains inactive as an ignition source in the case of regular expected occurrences (for example failure of a lamp)
Equipment classification
Groups, Categories, Atmosphere, Type of protection, Temperature classes
For a safe use of electrical equipment in a potentially explosive atmosphere the following information must be known in advance:
• the environment in which the apparatus will operate;
• the gas group;
• the spontaneous ignition temperature of the gas mixture.
These information lead to the following classification of the electrical equipment by groups, categories, type of protection and temperature class.
Equipment
Protection Level
IEC/EN 60079-0
Protection
Level
Ma
Mb
Ga
Gb
Gc
Da
Db
Dc
Very high
High
Very high
High
Enhanced
Very high
High
Enhanced
Group
EU Directive 97/9/EC
Equipment
Equipment
Group
Category
I
I
(Mines)
(Mines)
II
(Gas)
III
II
(Surface industries)
(Dust)
IEC/EN 60079-10-X
M1
M2
1G
2G
3G
1D
2D
3D
Zones
NA
0
1
2
20
21
22
Groups
The electrical apparatus is subdivided into two groups, according to the environments in which the equipment will operate:
Group
I
II
Environment
equipment used in mines and on the surface of mines in the presence of
fire dump and/or combustible dust.
equipment used in explosive atmosphere other than mines (surface
industries).
Categories
Each group is classified by categories, according to the level of protection the apparatus must have:
Atmosphere (for group II – surface industries)
Examples Of Gas Atmospheres
The equipment belonging to the group II is also specified by the nature of the atmosphere and can be arranged into the following categories:
G a mixture of air and gas, vapour or mist
D a mixture of air and combustible dust
3
Gas atmospheres are further divided into 3 sub-groups, according to the severity of the environment:
Group
Danger rating
II A
Examples
Low
acetone, acetic acid, methanol, ethanol, benzene, ethane, methane, propane,
toluene, xylene, combustible oil, kerosene, acetaldehyde, ethyl benzene, isoprene
coke-oven gas, ethylene, ethylene oxide, ethyl ether, formic aldehyde
High
hydrogen, acetylene, water gas, carbon sulphur
II B
II C
Note: a motor belonging to a particular group is also suitable for use in a lower group
In IEC/EN 60079-0 a group III has been created for dusts. This is to allow the recognition of conductive and non-conductive dusts and flyings. The three categories
are defined below.
Group
IEC 60079-10-2 Definition
Description
III A
Combustible flyings
solid particles, including fibres, greater than 500 μm in nominal size, which may be suspended in air, may settle
out of the atmosphere under their own weight, can burn or glow in air, and may form explosive mixtures with air at
atmospheric pressure and normal temperatures
III B
Non-conductive dusts
Electrical resistivity > 103 Ωm
III C
Conductive dusts
Electrical resistivity < 103 Ωm
finely divided solid particles, 500 μm or less in nominal size, which may be suspended in air, may settle out of the
atmosphere under their own weight, can burn or glow in air, and may form explosive mixtures with air at atmospheric
pressure and normal temperatures
Types of protection
The IEC/EN 60079-10 standard classifies the dangerous areas, while the standard EN 60079-14 defines the compatibility between the protection method and the
aforementioned dangerous zones. The types of protection are defined as follows:
GAS environments
Protection
The equipment must be designed in such a way that:
Ex d
flameproof enclosures
EN 60079-1
Ex de
flameproof enclosure
EN 60079-1 EN 60079-7
Ex e increased safety
EN 60079-7
Ex nA non sparking design
EN 60079-15
no internal explosion can be transmitted to the explosive atmosphere surrounding it the temperature of the equipment’s external surface should
not exceed the self-ignition temperature of the explosive atmosphere during normal operation
an “Ex d” flameproof enclosure is combined with the terminal box featuring
an “Ex e” increased safety protection
no sparks, arcs, or hot spots can occur in service, including starting and locked rotor situation, in all internal and external parts of the machine
temperature rise limits are considered both for normal operating conditions and for accidental stalling conditions (ex. short circuit)
no sparks, arcs, or hot spots can occur in normal operation
Dust ignition protection by enclosure “t” EN 60079-31
Equipment Characteristics
Protection
Ex tD A21 IP65
Ex tD A22 IP55
for non conductive dust
Ex tD A22 IP65
for conductive dust
Danger zone
Motor category
Protection mode
21
2D
IP65
22
3D
IP55
22
3D
IP65
Temperature classes
For Gas environments
The electrical equipment is classified into 6 classes according to the maximum surface temperatures, which is:
• the temperature of the external surfaces for
motors with protection mode “d”;
• the temperature of any internal and external point for motors with protection mode “e” or “n”;
The maximum surface temperature of the equipment must remain lower than the lowest possible ignition temperature of the atmosphere surrounding it.
Temperature class
Ignition Temperature
for the gas/vapour °C
Max. Permitted
Temperature°C
T1
T2
T3
T4
T5
T6
>450
300<T<450
200<T<300
135<T<200
100<T<135
85<T<100
450
300
200
135
100
85
For Dust environments
Combustible dusts can form potentially explosive atmospheres when dispersed in the air; these hazardous areas can be found in a variety of industries such as
agriculture, chemicals, plastics, etc.
The selection of electrical equipment to be used in hazardous areas with dust shall be made by considering:
• the type of dust: a cloud of dust around the machine or a layer of dust on it;
4
• the characteristic of the dust: conductive or non-conductive;
• Ignition temperature of the dust: Tcl for a cloud of dust, T5mm for a 5 mm dust layer.
The surface temperature of the enclosure indicated on the motor nameplate must be less than the reference ignition temperature (Tamm), which is the lowest
between the following values:
TS1 = 2/3 Tcl
Tamm = the lowest between TS1 and TS2
TS2 = T5mm - 75K
Marking temperature of equipment ≤ Tamm
Marking of equipment
According to the 94/4/EC Directive, motors come with 3 markings, in order to let the user check the compatibility between the protection mode of the motor and
the classification of the area of its installation:
Complementary Marking
for Ex
Ex nA
T3
Gc
Protection type
Ex d, Ex de, Ex e, Ex nA
Specific Marking
II
IIC
3
Sub-group of gas
IIA, IIB, IIC
G
CE Marking
Temperature
class (T1÷T6)
0722
European Commission mark
for Ex products
+
EPL (Gb Gc)
+
Equipment Group:
II for surface industries
I for mines
European Community
Identification of notified body
(0722 = CESI)
Complementary
Marking for Ex tD
Equipment Category:
2 for zone 1 or 21
3 for zone 2 or 22
Ex tc
Atmosphere:
G for gas
D for dust
IIIC
T125°C IP65
Dc
Protection by
enclosure
Installation in zone 21
Max surface temperature
IP protection
EPL (Db Dc)
Nomenclature of motor series
Series
Specific Marking
Atmosphere
Ex
Group
Supplementary Marking
Category
Protection
B5N
GAS
II
3G
Ex nA
B5A
DUST
II
3D
Ex tc
Group
IIA
IIB
IIC
IIIA
IIIB
IIIC
Supply
Temperature
class
IP
EPL
Mains
Inverter
T3
-
Gc
X
X
T125°C
T150°C
IP55
Dc
X
X
The table above clearly shows that the series name indicates the type of protection.
Certifications
B5N motors (gas) from 160 to 315 frames are certified by third body authority (TUV 11 ATEX 385428 X) the others sizes are self certified.
B5A motors (dust) are all self certified.
5
TECHNICAL SPECIFICATION
Materials
Components
Frame Size
71 - 315
Frame Size
355 - 400
Frame Size
450 - 500
Frame
Endshields
Fan cowl
Cast Iron
Cast Iron
Steel
Cast Iron
Cast Iron
Fibreglass
2 poles polyamide
≥4 poles aluminium
Cast Iron
Cast Iron
Cast Iron
Fibreglass
poles polyamide
≥4 poles aluminium
Steel
Fan
Thermoplastic
Terminal Box
1
1
Cast Iron
Terminal box casted with frame for 71 and 80 sizes
Insulation class F
Class F insulation systems are utilised in Marelli Motori motors. This is the most common requirement among the industry today. The class F insulation system
allows a temperature rise of 105K, measured by the resistance variation method, and a maximum hot spot temperature value of 155oC. The materials and the
impregnation systems used make these motors suitable for use in tropical environments, for applications with high vibrations and for applications with high
thermal variations.
Option 100
Insulation class H can be provided upon request.
Temperature rise compatible with class B
Class B rise allows a maximum winding temperature rise of 80K under normal running conditions (rated voltage, frequency and load) with maximum ambient
temperature of 40°C and altitude below 1000m a.s.l.
Installation 1000 m a.s.l.
The performance of standard motors is considered at a maximum height of 1000m above sea level (a.s.l.) with motors running in continuous duty, at nominal
voltage and frequency.
Bearings
Frame
size
D-end
Horizontal and Vertical
71
80
90
100
112
132
160
180 M IE1
180 IE2
200
225
250
280 2 poles
280 >= 4 poles
315 -2 poles
315 M >= 4 poles
315 L >= 4 poles
355 2 poles
355 >= 4 poles
400 2 poles
400 LA-LB >= 4 poles
400 LC-LD >= 4 poles
450 2 poles
450 >= 4 poles
500 2 poles
500 >= 4 poles
6202-2Z-C3
6204-2Z-C3
6205-2Z-C3
6206-2Z-C3
6206-2Z-C3
6308-2Z-C3
6310-Z -C3
6310-Z -C3
6310-Z -C3
6312-Z -C3
6313-Z -C3
6314-Z -C3
6314-Z-C3
NU2217-EC-C3
6316-C3
NU2219-EC-C3
6319-C3
6317-C3
6322-C3
6317-C3
6322-C3
6322-C3
6320-C3
6326-C3
6328-C3
N-end
Horizontal
Vertical
6202-2Z-C3
6204-2Z-C3
6205-2Z-C3
6206-2Z-C3
6206-2Z-C3
6308-2Z-C3
6209-Z -C3
6209-Z -C3
6210-Z -C3
6210-Z -C3
6213-Z -C3
6213-Z -C3
6314-Z-C3
6314-Z-C3
6316-C3
6316-C3
6316-C3
6317-C3
6322-C3
6317-C3
6322-C3
6322-C3
6320-C3
6326-C3
on request
6328-C3
7317-BE
6322-C3
7317-BE
6322-C3
7322-BE
7320-BE
7326-BC
7328-BC
Re-greasing systems are normally supplied for frame size 280 and 315. On request, regreasing systems are available from frame size 160 to 250.
6
Mountings and Positions
Mountings and positions are defined by the following codes according to IEC 60034-7:
_
_
B: Horizontal
V: Vertical
IM
Mounting
code
Code II
IM B3
IM 1001
Mount
●
●
_
_
Mounting
arrangement
Type of shaft extension
(1-9)
IEC 60034-7
● ● ● ● ● ●
500
Code I
Frame size
71÷132
160÷250
280
315 M
315 L
355
400
450
IEC 60034-7
Mounting category
(1-9)
_
●
Code I
Code II
IM V1
IM 3011
Frame size
71÷132
160÷250
280
315 M
315 L
355
400
450
IM
Code II ( Simplified )
Mount
500
Code I (Simplified )
●
●
● ● ● ● ● ●
●
●
●
● ● ● ● ● ●
●
●
●
x
x
x
x
-
-
-
●
●
x
x
x
x
-
-
-
●
●
x
x
x
x
-
-
-
●
●
x
x
x
x
-
-
-
1)
2)
IM B35
●
IM 2001
●
● ● ● ● ● ●
●
IM V15
IM 2011
1) 2)
1) 2)
IM B34
●
IM 2001
-
-
-
-
-
-
-
-
IM V3
IM 3031
1)
2)
IM B5
●
IM 3001
●
x
x
x
x
-
-
-
IM V36
IM 2031
2)
1) 2)
IM B6
●
IM 1051
●
x
x
x
x
-
-
-
IM V5
IM 1011
1)
1)
IM B7
●
IM 1061
●
x
x
x
x
-
-
-
IM V6
IM 1031
1)
1)
IM B8
IM 1071
●
●
x
x
x
x
-
-
-
IM V18
IM 3611
●
-
-
-
-
-
-
-
-
●
-
-
-
-
-
-
-
-
IM V19
IM 3631
●
-
-
-
-
-
-
-
-
1)
IM B14
1)
2)
●
-
X
IM 3601
Motors with feet
Flanged Motor: unthreaded through holes
Standard
Not applicable
Consult Marelli Motori
For other mounting arrangements refer to IEC 60034-7. The motors should be installed on a rigid foundation with negligible structural vibrations. Feet can be
removed for motors with frame sizes 71 to 132.
7
Balancing and vibration grades
Vibration
grade
160 < h < 280
H > 280
Mounting
Displac.
[µm]
Vel.
[mm/s]
Acc.
[m/s2]
Displac.
[µm]
Vel.
[mm/s]
Acc.
[m/s2]
Free
35
2.2
3.5
45
2.8
4.4
Ridig
29
1.8
2.8
37
2.3
3.6
Free
18
1.1
1.7
29
1.8
2.8
Ridig
14
0.9
1.4
24
1.5
2.4
A
reduced
B
special
The motors are dynamically balanced with a half key applied to the shaft extension in accordance with standard IEC 60034-14 to vibration severity grade normal
(A) in standard construction.
The following table indicates the maximum vibration grades with respect to the varying shaft heights.
Motors can be supplied with either a special (B) vibration level on request.
The instrumentation can have a measurement tolerance of 10%.
Radial Loads
The maximum allowable radial forces at the shaft extension (Xmax) and at the shaft collar (Xo) for motors having the following characteristics:
• standard construction;
• horizontal mounting (Mounting arrangement IM B3, IM B35 only);
• operating frequency 50Hz;
• bearing life of 20 000 hours (according to ISO 281:1990);
• bearing operating temperature between –20 and +70°C;
• no external axial forces;
• motor installed on a rigid foundation with negligible structural vibrations; are shown in the following table.
Frame size
71
80
90
100
112
132
160
180
200
225
250
280
315 M
315 L
355 L
400 LA-LB
400 LC-LD
450 L
500 L
2 poles
4 poles
6 poles
FXo
FXmax
FXo
FXmax
440
665
730
1050
1700
2270
3000
3000
1390
4550
3260
4600
6100
7030
4300
3600
1000 / 3400
/
365
540
610
855
1230
1740
2400
2400
950
3800
2000
3750
3530
4490
2200
2000
500 / 3100
/
550
835
950
1320
1980
2720
3600
3650
1390
5400
3260
450
680
785
1080
1510
2110
2000
2500
950
3800
2000
10590
9000
9000
2000 / 5500
3000
5580
6500
7800
1000 / 4800
1500
FXo
8 poles
FXmax
635
500
965
740
1110
920
1560
1270
2210
1530
3100
2490
4300
2000
4300
2500
1390
950
6300
3800
3260
2000
See construction for high radial loads
See construction for high radial loads
11250
5580
9800
3400
10500
4500
300
300
5600
3000
300
300
Forces [N]
The maximum radial loads between the values Xo=0 and Xmax=E can be determined from the following linear relationship.
X
Fr
Fr = Fxo −
E
Xmax
Fx0 =
Fxmax =
E =
X =
8
Xo
maximum radial load at the shaft collar [N].
maximum radial load on the end of the shaft extension [N].
shaft extension length [mm].
Point of application of the radial force to the shaft collar [mm]
X
(Fxo − Fxmax )
E
FXo
FXmax
690
1100
1260
1770
2500
3580
4500
4900
1390
7000
3260
505
745
1060
1450
1470
2880
2000
2500
950
3800
2000
/
9800
- / 2000
300
2000
300
/
3000
- / 1000
300
1000
300
Axial Loads
L10h=20 000 h (in accordance with ISO R 281-1) operating frequency 50 Hz; no external radial forces.
Mounting arrangement IM B3, IM B35 1)
Maximum allowed
Axial force [N]
Maximum allowed
Axial force [N]
Frame
size
71
80
90
100
112
132
160
180
200
225
250
280
315 M
315 L
355 L
400 LA-LB
400 LC-LD
450 L
500 L
2 poles
4 poles
6 poles
8 poles
2 poles
4 poles
6 poles
8 poles
275
450
485
670
990
1400
1000
950
710
1750
1700
3250
4000
3240
2000
1850
1000 / 4200
-/-
350
550
610
850
1200
1800
1200
1300
710
2100
2050
4050
4850
3930
6000
6000
1630 / 7300
3400
410
650
720
980
1450
2050
1450
1500
710
2500
2000
4700
5600
4530
7000
7100
300
8300
300
460
730
810
1100
1600
2300
1650
1700
710
2750
2120
5200
6200
-/8000
- / 6900
300
4600
300
275
450
485
670
990
1400
2000
2000
2650
3000
3400
3250
4000
3240
2000
1850
1000 / 4200
-/-
350
550
610
850
1200
1800
2500
2500
3350
3700
4200
4050
4850
3930
6000
6000
1630 / 7300
3400
410
650
720
980
1450
2050
2900
2900
3850
4300
4800
4700
5600
4530
7000
7100
300
8300
300
460
730
810
1100
1600
2300
3300
3200
4300
4750
5400
5200
6200
-/8000
- / 6900
300
4600
300
Forces [N]
Mounting arrangement IM V1, IM V15 1)
Maximum allowable axial force
In downwards direction [N]
Maximum allowable axial force
In upwards direction [N]
Frame
size
71
80
90
100
112
132
160
180
200
225
250
280
315 M
315 L
355 L
400 LA-LB
400 LC-LD
450 L
500 L
2 poles
4 poles
6 poles
8 poles
2 poles
4 poles
6 poles
8 poles
330
540
550
750
1150
1600
1730
1650
2190
2380
2700
2130
2170
1350
3690
1350
1000 / 300
-/-
440
720
730
1050
1500
2100
2040
1990
2750
2760
3160
2430
1950
1270
1880
300
300 / 300
3400
560
850
880
1250
1800
2500
2470
2340
3140
3330
3540
3100
2150
490
300
300
300
300
300
640
980
1050
1400
2000
2900
2930
2680
3660
3820
4250
3640
2820
-/300
- / 300
300
300
300
360
590
630
900
1300
1950
1270
1300
1170
2370
2410
4370
5830
5850
160
2450
1000 / 100
-/-
480
780
840
1180
1700
2500
1660
1820
1310
3040
3090
5670
7750
7470
14100
14400
1630 / 714
3400
600
930
1000
1400
2000
3000
1880
2060
1430
3470
3260
6300
9050
9590
15800
16900
300
11100
300
680
680
1150
1600
2300
3450
2020
2230
1350
3680
3270
6760
9580
-/17100
- / 6900
300
13900
300
Forces [N]
9
Sound levels
The following table contains the average values of A-sound pressure levels (LpA), measured at a one metre distance, according to standard ISO R 1680. The values
are measured in no-load conditions at 50Hz with tolerances of 3 dB (A). Sound pressure levels increase by approximately 4 dB(A) at 60 Hz.
Sound pressure a LpA [dB(A)] – 50Hz
Frame size
[mm]
71
80
90
100
112
132
160
180
200
225
250
280
315
355
400
450
500
2 poles
4 poles
6 poles
8 poles
std
IE2
std
IE2
std
IE2
std
IE2
58
62
66
69
69
70
78
78
80
84
84
84
83
82
82
84
-
58
62
66
69
69
70
72
74
74
77
77
80
83
82
82
84
-
49
49
49
56
56
58
65
69
69
74
74
77
78
79
81
83
85
49
49
49
56
56
58
62
63
63
68
68
75
78
79
81
83
85
52
53
56
58
58
60
62
63
63
66
66
72
74
75
76
79
82
52
53
56
58
58
60
62
63
63
66
66
72
74
75
76
79
82
52
53
56
58
58
60
61
62
62
63
63
72
74
70
73
76
80
52
53
56
58
58
60
61
62
62
63
63
72
74
70
73
76
80
Degree of protection
B5N motors in standard execution have IP55 protection degree, where:
5 (first number in code): ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the
machine.
5 (second number in code): water projected against the machine from a nozzle from any direction has no harmful effect.
Option 125
IP56 protection can be provided upon request.
Protective Treatment
External Surfaces
The standard painting process consists of epoxy vinyl-polyurethane paint: of a thickness used to ensure an optimum environmental resistance. Standard finishing
paint colour is RAL 5010. Other RAL and MUNSELL colours are available on request.
The special painting process, consisting of epoxy vinyl paint followed by poly-acrylic paint, is available on request.
This process is particularly recommended for:
• Environments where acids or basic liquids are present;
• Outdoor installations where salt is present;
• Marine applications;
• Environments where anhydride gases are present.
Description
Painting
* On request
Process
Characteristics
Standard
F96833
Two component paint formulated with solid epoxy resins modified with vinyl polyamide
catalysers
Typical for Marine Application
Base paint: epoxy vinyl paint
Final Paint: polyacrylic paint
For aggressive atmosphere and environment classification C5-M
Base paint: epoxy vinyl paint + Final Paint: polyacrilic paint
Special
F96819*
Special
F96826*
Minimum Thickness
≥ 50 µm
≥ 200 µm
≥ 200 µm
Internal Surfaces
All internal surfaces of motors from 160 frame size are tropicalized with an insulating enamel to prevent motor corrosion due to humidity and aggressive
substances.
10
Terminal box
Motors are provided with the terminal box placed on the top and the cable entry on the right side.
Frame
size
Terminal thread
Main
entrance
Auxiliary
entrance
71 - 80
90 - 132
160 - 200
225 - 250
280 - 315
M6
M6
M6
M8
M12
M25 x 1,5
M32 x 1,5
2 x M40 x 1,5
2 x M50 x 1,5
2 x M75 x 1,5
M20 x 1,5
M20 x 1,5
M20 x 1,5
M20 x 1,5
M20 x 1,5
11
ELECTRIC DATA TABLES - MAINS SUPPLY
40°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
[rpm]
[%]
2840
2840
2860
2870
2870
2870
2880
2890
2920
2920
2928
2920
2925
2925
2930
2945
2945
2960
2960
2960
2960
2975
2970
2980
2980
2980
2980
2980
2980
2980
2981
2982
2983
2987
2988
2989
75.4
76.8
79.6
80.9
82.6
83.8
84.6
86.5
87.9
88.8
89.1
88.4
89.8
90.5
90.2
92.0
92.2
92.5
93.0
93.6
94.2
94.3
94.3
94.7
94.7
95.5
95.6
95.6
96.7
96.7
96.9
97.0
97.2
97.4
97.5
97.6
η
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.81
0.81
0.80
0.81
0.84
0.86
0.89
0.90
0.89
0.90
0.90
0.82
0.83
0.81
0.84
0.87
0.87
0.88
0.87
0.87
0.88
0.87
0.86
0.87
0.87
0.89
0.90
0.89
0.90
0.90
0.90
0.90
0.90
0.91
0.92
0.92
0.87
1.28
1.70
2.42
3.12
4.41
5.75
7.42
10.1
13.5
16.2
21.9
29.0
36.4
41.9
54.1
66.6
79.8
98.1
133
157
194
235
280
350
425
528
602
663
746
828
926
1039
670*
746*
839*
1.24
1.85
2.50
3.66
4.99
7.32
9.95
13.2
18.0
24.5
29.4
36.0
49.0
60.4
71.7
97.3
120
145
177
242
290
353
424
513
641
801
1009
1138
1282
1442
1602
1793
2017
2270
2557
2875
5.6
5.8
6.2
6.4
7.3
7.5
7.7
7.5
7.2
7.2
7.3
6.2
6.6
7.1
7.0
6.8
6.9
6.6
6.7
6.8
7.2
6.4
6.5
6.5
6.8
7.0
7.1
7.2
6.5
6.5
5.7
6.1
7.0
5.8
6.3
6.6
2.6
2.8
2.8
3.1
2.9
3.7
3.1
2.7
2.7
2.7
2.9
2.1
2.4
2.6
2.5
2.3
2.4
2.4
2.4
2.3
2.3
2.4
2.5
2.5
2.6
2.3
2.2
2.1
2.2
2.4
1.9
1.8
2.1
0.5
0.6
0.6
2.6
2.8
2.9
3.2
3.3
3.9
3.3
2.9
2.9
2.9
3.0
2.8
3.0
3.0
3.0
2.9
3.0
3.0
3.0
2.7
2.7
2.4
2.5
2.5
2.6
2.3
2.2
2.2
2.2
2.3
2.1
2.1
2.3
2.9
3.2
3.2
0.00048
0.00048
0.00092
0.00092
0.00175
0.00175
0.0037
0.0060
0.0171
0.0171
0.0171
0.030
0.035
0.040
0.048
0.165
0.180
0.225
0.250
0.350
0.416
0.95
0.95
1.3
1.4
3.7
4.5
5.2
5.9
6.5
8.2
9.1
10
22
24
27
18
18
23
23
35
35
53
62
99
99
99
115
125
143
154
189
209
304
336
484
517
760
760
887
906
1620
1810
2030
2180
2310
2680
2850
3030
4130
4450
4780
2 poles
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
9
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
400
450
500
560
630
710
800
900
* 690 V
12
71 MA2
71 MB2
80 MA2
80 MB2
90 S2
90 L2
100 LA2
112 M2
132 SA2
132 SB2
132 MB2
160 MA2
160 MB2
160 L2
180 M2
200 LA2
200 LB2
225 M2
250 M2
280 S2
280 M2
315 SM2
315 MA2
315 MD2
315 ML2
355 LA2
355 LB2
355 LC2
355 LD2
355 LE2
400 LA2
400 LB2
400 LC2
450 LA2
450 LB2
450 LC2
40°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
[rpm]
[%]
1410
1410
1400
1420
1420
1420
1440
1440
1445
1450
1450
1455
1460
1460
1465
1470
1475
1475
1475
1480
1480
1488
1485
1485
1485
1490
1490
1490
1490
1490
1490
1489
1489
1490
1492
1493
1493
1493
1493
1494
68.6
71.0
72.0
73.7
78.2
79.3
84.2
84.4
85.7
87.9
88.2
88.6
89.4
90.0
90.5
91.6
92.5
92.5
93.0
93.7
93.9
93.6
94.5
95.3
95.3
95.7
95.7
95.8
96.0
96.3
96.4
96.7
96.8
96.9
97.2
97.3
97.4
97.6
97.7
97.8
η
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.65
0.68
0.80
0.81
0.79
0.81
0.82
0.81
0.82
0.82
0.82
0.81
0.81
0.82
0.84
0.84
0.86
0.86
0.87
0.86
0.88
0.85
0.85
0.86
0.85
0.86
0.86
0.86
0.86
0.87
0.90
0.87
0.87
0.87
0.89
0.89
0.89
0.89
0.89
0.89
0.81
1.11
1.38
1.81
2.6
3.4
4.6
6.3
8.2
11.0
15.0
22.1
29.9
36.2
41.8
56.3
67.1
81.6
98.1
134
157
200
237
282
356
438
552
622
699
775
832
961
1080
1216
774*
870*
965*
1204*
1347*
1538*
1.7
2.5
3.8
5.0
7.4
10.1
14.6
19.9
26.4
36.2
49.4
72.2
98.1
121
143
195
240
291
356
484
581
706
849
1029
1286
1602
2019
2275
2564
2884
3204
3591
4040
4550
5120
5756
6396
7995
8954
10227
4.2
4.4
5.9
5.9
6.1
6.2
5.9
5.9
6.8
6.2
6.3
5.2
6.4
6.2
6.3
6.4
6.5
6.5
7.3
7.0
7.1
6.5
6.2
6.5
6.9
6.2
6.2
6.2
5.6
5.6
5.9
5.9
5.9
6.7
6.0
6.3
6.1
4.7
5.0
5.2
2.5
2.6
2.7
2.7
3.0
3.2
2.8
2.7
2.8
2.5
2.6
2.0
2.7
2.5
2.4
2.6
2.3
2.4
2.6
2.5
2.7
2.6
2.5
2.5
2.6
1.9
2.0
1.9
2.0
2.0
1.3
2.1
2.1
1.0
1.0
1.1
1.1
0.6
0.7
0.7
2.0
2.0
2.5
2.5
3.0
3.2
2.9
2.9
3.0
2.6
2.8
2.1
2.9
2.5
2.5
2.7
2.8
2.8
2.7
2.3
2.4
2.6
2.5
2.6
2.7
2.4
2.4
2.3
2.5
2.4
2.9
2.4
2.5
2.6
2.8
2.9
2.9
2.2
2.4
2.5
0.00097
0.00097
0.00245
0.00245
0.0034
0.0034
0.0075
0.0075
0.0125
0.032
0.032
0.063
0.075
0.09
0.11
0.18
0.32
0.41
0.55
0.89
1.1
2.1
2.1
3.1
3.3
6.1
7.4
8.3
9.4
10.2
11.2
11.4
13
18
29
33
37
47
53
60
19
19
24
24
36
36
56
56
68
101
101
123
135
148
177
205
302
332
370
525
584
780
780
965
1001
1690
1880
2100
2250
2360
2430
2700
2900
3100
4250
4530
4860
6200
6620
7140
4 poles
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
400
450
500
560
630
710
800
900
1000
1250
1400
1600
* 690 V
71 MA4
71 MB4
80 MA4
80 MB4
90 S4
90 L4
100 LA4
100 LB4
112 M4
132 SA4
132 MA4
160 M4
160 L4
180 M4
180 L4
200 L4
225 S4
225 M4
250 M4
280 S4
280 M4
315 SM4
315 MA4
315 MD4
315 ML4
355 LA4
355 LB4
355 LC4
355 LD4
355 LE4
355 LF4
400 LA4
400 LB4
400 LC4
450 LA4
450 LB4
450 LC4
500 LA4
500 LB4
500 LC4
13
40°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
[rpm]
[%]
930
930
920
920
930
940
950
950
960
965
967
970
970
972
975
975
980
980
985
985
985
985
985
990
990
990
990
992
992
993
994
994
994
994
995
995
995
64.5
66.9
66.7
69.9
76.6
80.3
84.7
85.0
85.4
86.0
88.0
88.2
88.2
89.0
90.5
91.0
92.5
93.0
93.8
93.8
94.3
94.6
94.6
95.3
95.5
95.5
95.6
96.2
96.4
96.5
96.5
96.7
97.0
97.1
97.2
97.3
97.5
η
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.60
0.69
0.72
0.74
0.77
0.77
0.75
0.75
0.76
0.82
0.82
0.82
0.83
0.83
0.84
0.84
0.83
0.84
0.83
0.84
0.84
0.85
0.84
0.85
0.85
0.86
0.87
0.84
0.85
0.84
0.87
0.85
0.85
0.85
0.86
0.87
0.87
1.38
1.72
2.25
3.07
3.67
5.14
6.82
9.06
12.2
15.4
22.0
29.9
36.5
43.0
57.0
69.9
84.6
102
139
165
200
237
291
356
445
554
616
714
793
890
963
1106
1243
1399
951*
1087*
1282*
3.80
5.65
7.78
11.4
15.4
22.3
30.2
40.2
54.7
74.2
109
148
182
216
294
362
438
536
727
873
1066
1280
1551
1929
2411
3038
3424
3851
4332
4808
5380
6052
6821
7686
9117
10557
12476
3.7
3.9
4.0
4.2
3.8
4.0
4.5
4.6
4.6
5.0
5.5
5.2
5.2
5.5
6.2
6.5
6.0
6.0
6.3
6.0
6.0
6.3
6.9
6.0
6.0
6.3
6.5
6.2
6.5
6.9
6.2
5.6
5.9
5.6
4.7
4.8
5.0
2.0
2.0
2.1
2.3
2.0
1.5
2.0
2.0
1.9
2.0
2.3
2.3
2.1
2.4
2.4
2.6
2.5
2.5
2.6
2.5
2.5
2.5
2.6
2.1
2.1
2.3
2.3
1.6
1.7
1.8
1.5
1.1
1.1
1.1
0.7
0.7
0.9
1.8
1.9
2.3
2.4
1.9
1.6
2.3
2.4
2.5
2.3
2.5
2.2
2.3
2.4
2.4
2.6
2.5
2.5
2.6
2.5
2.5
2.5
2.8
2.1
2.1
2.3
2.4
2.6
2.6
2.7
2.7
2.6
2.7
2.6
2.2
2.3
2.3
0.0029
0.0029
0.0037
0.0037
0.0075
0.0125
0.039
0.039
0.039
0.087
0.11
0.13
0.17
0.22
0.47
0.57
0.85
1.1
2.6
2.6
3
3.6
4.7
10.5
13.1
17
18.6
17.5
19.5
22
30
41
46
51
71
82
97
25
25
42
42
56
71
106
106
106
131
147
165
185
203
309
342
479
518
748
748
768
889
1031
1160
1890
2315
2390
2680
2850
3070
3200
4300
4600
4950
6000
6570
7300
6 poles
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
400
450
500
560
630
710
800
950
1100
1300
* 690 V
14
80 MA6
80 MB6
90 S6
90 L6
100 LA6
112 M6
132 SA6
132 MA6
132 MB6
160 M6
160 L6
180 L6
200 LA6
200 LB6
225 M6
250 M6
280 S6
280 M6
315 SM6
315 MA6
315 MB6
315 MC6
315 ML6
355 LA6
355 LB6
355 LC6
355 LD6
400 LA6
400 LB6
400 LC6
400 LD6
450 LA6
450 LB6
450 LC6
500 LA6
500 LB6
500 LC6
40°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
[rpm]
[%]
680
690
675
680
680
695
700
710
710
710
720
720
725
725
730
730
730
735
735
740
740
740
740
740
740
740
740
740
743
743
743
745
745
745
745
745
746
49.3
53.8
55.9
60.9
67.6
70.2
75.8
80.7
81.0
81.5
82.4
84.7
86.7
88.0
89.0
90.0
91.0
92.5
93.0
93.5
93.8
94.4
94.5
94.6
95.3
95.4
95.7
95.7
95.7
95.9
96.0
96.5
96.6
96.7
97.0
97.1
97.2
η
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.65
0.68
0.66
0.69
0.66
0.66
0.71
0.70
0.70
0.73
0.74
0.74
0.75
0.75
0.76
0.76
0.76
0.80
0.80
0.81
0.82
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.82
0.82
0.82
0.84
0.85
0.85
0.85
0.86
0.86
0.81
0.99
1.45
1.89
2.43
3.43
4.02
5.62
7.64
9.70
13.0
17.3
24.4
32.8
39.5
46.4
62.6
72.2
87.3
105
141
166
202
243
292
365
454
572
653
734
825
890
984
1106
721*
802*
901*
2.53
3.46
5.23
7.72
10.5
15.1
20.5
29.6
40.3
53.8
72.9
99.5
145
198
242
288
392
481
585
710
968
1161
1419
1703
2065
2581
3226
4065
4563
5141
5784
6409
7178
8075
9101
10254
11521
2.6
2.7
2.8
2.9
2.7
2.7
2.8
3.2
3.1
4.2
4.2
4.2
4.5
5.0
5.2
5.3
5.5
6.0
6.0
6.5
6.0
6.2
6.2
6.2
5.2
5.0
5.2
5.4
5.4
5.6
5.2
4.8
4.7
4.7
4.7
4.7
5.0
1.9
1.9
2.0
2.0
1.5
1.4
1.2
1.5
1.4
1.9
1.9
2.0
2.0
2.1
2.2
2.2
2.3
2.5
2.5
2.3
2.1
2.2
2.2
2.3
2.2
2.1
2.1
1.6
1.4
1.4
1.3
1.0
1.0
1.0
0.7
0.7
0.9
1.9
1.9
2.0
2.1
1.9
1.8
1.7
1.7
1.6
2.1
2.1
2.1
2.2
2.3
2.4
2.4
2.5
2.5
2.5
2.4
2.2
2.3
2.3
2.3
2.2
2.2
2.1
2.7
2.4
2.4
2.3
2.1
2.1
2.1
2.3
2.3
2.3
0.0029
0.0029
0.0037
0.0037
0.0075
0.0075
0.0132
0.039
0.039
0.080
0.092
0.11
0.16
0.22
0.42
0.52
0.62
1.1
1.3
2.8
2.8
3.5
4.0
4.3
12.7
15.4
18.8
21.4
26
30
33
55
61
69
95
110
122
25
25
42
42
56
56
71
106
106
115
123
133
188
216
294
326
356
520
553
776
776
886
924
993
1710
1910
2240
2390
2850
3070
3230
4350
4620
5020
6180
6750
7230
8 poles
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
400
450
500
560
630
710
800
900
* 690 V
80 MA8
80 MB8
90 S8
90 L8
100 LA8
100 LB8
112 M8
132 SA8
132MA8
160 MA8
160 MB8
160 L8
180 L8
200 L8
225 S8
225 M8
250 M8
280 S8
280 M8
315 SM8
315 MA8
315 MC8
315 MD8
315 ME8
355 LA8
355 LB8
355 LC8
355 LD8
400 LA8
400 LB8
400 LC8
450 LA8
450 LB8
450 LC8
500 LA8
500 LB8
500 LC8
15
55°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
[rpm]
[%]
2840
2840
2860
2870
2870
2870
2880
2890
2920
2920
2928
2920
2925
2925
2930
2945
2945
2960
2960
2960
2960
2975
2970
2980
2980
2980
2980
2980
2980
2980
2981
2982
2983
2987
2988
2989
75.4
76.8
79.6
80.9
82.6
83.8
84.6
86.5
87.9
88.8
89.1
88.4
89.8
90.5
90.2
92.0
92.2
92.5
93.0
93.6
94.2
94.3
94.3
94.7
94.7
95.5
95.6
95.6
96.7
96.7
96.9
97.0
97.2
97.4
97.5
97.6
η
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.81
0.81
0.80
0.81
0.84
0.86
0.89
0.90
0.89
0.90
0.90
0.82
0.83
0.81
0.84
0.87
0.87
0.88
0.87
0.87
0.88
0.87
0.86
0.87
0.87
0.89
0.90
0.89
0.90
0.90
0.90
0.90
0.90
0.91
0.92
0.92
0.87
1.28
1.70
2.4
3.1
4.4
5.8
7.4
10.1
13.5
15.3
17.9
21.3
29.5
35.2
39.7
54.0
65.6
80.3
97
131
158
196
231
280
374
463
529
584
657
728
813
914
589*
657*
738*
1.24
1.85
2.50
3.7
5.0
7.3
9.9
13.2
18.0
24.5
27.7
29.4
35.9
49.0
60.3
71.3
97.3
119
145
177
242
289
354
423
513
705
884
1000
1128
1269
1409
1576
1773
1995
2250
2530
5.6
5.8
6.2
6.4
7.3
7.5
7.7
7.5
7.2
7.2
7.3
6.2
6.6
7.1
7.0
6.8
6.9
6.6
6.7
6.8
7.2
6.4
6.5
6.5
6.8
7.0
7.1
7.2
6.5
6.5
5.7
6.1
7.0
5.8
6.3
6.6
2.6
2.8
2.8
3.1
2.9
3.7
3.1
2.7
2.7
2.7
2.9
2.1
2.4
2.6
2.5
2.3
2.4
2.4
2.4
2.3
2.3
2.4
2.5
2.5
2.6
2.3
2.2
2.1
2.2
2.4
1.9
1.8
2.1
0.5
0.6
0.6
2.6
2.8
2.9
3.2
3.3
3.9
3.3
2.9
2.9
2.9
3.0
2.8
3.0
3.0
3.0
2.9
3.0
3.0
3.0
2.7
2.7
2.4
2.5
2.5
2.6
2.3
2.2
2.2
2.2
2.3
2.1
2.1
2.3
2.9
3.2
3.2
0.00048
0.00048
0.00092
0.00092
0.00175
0.00175
0.0037
0.0060
0.0171
0.0171
0.0171
0.030
0.035
0.040
0.048
0.165
0.180
0.225
0.250
0.350
0.416
0.95
0.95
1.3
1.4
3.7
4.5
5.2
5.9
6.5
8.2
9.1
10
22
24
27
18
18
23
23
35
35
53
62
99
99
99
115
125
143
154
189
209
304
336
484
517
760
760
887
906
1620
1810
2030
2180
2310
2680
2850
3030
4130
4450
4780
2 poles
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
8.5
9
11
15
18.5
22
30
37
45
55
75
90
110
132
160
220
276
312
352
396
440
492
554
624
704
792
* 690 V
16
71 MA2
71 MB2
80 MA2
80 MB2
90 S2
90 L2
100 LA2
112 M2
132 SA2
132 SB2
132 MB2
160 MA2
160 MB2
160 L2
180 M2
200 LA2
200 LB2
225 M2
250 M2
280 S2
280 M2
315 SM2
315 MA2
315 MD2
315 ML2
355 LA2
355 LB2
355 LC2
355 LD2
355 LE2
400 LA2
400 LB2
400 LC2
450 LA2
450 LB2
450 LC2
55°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
[rpm]
[%]
1410
1410
1400
1420
1420
1420
1440
1440
1445
1450
1450
1455
1460
1460
1465
1470
1475
1475
1475
1480
1480
1488
1485
1485
1485
1490
1490
1490
1490
1490
1490
1489
1489
1490
1492
1493
1493
1493
1493
1494
68.6
71.0
72.0
73.7
78.2
79.3
84.2
84.4
85.7
87.9
88.2
88.6
89.4
90.0
90.5
91.6
92.5
92.5
93.0
93.7
93.9
93.6
94.5
95.3
95.3
95.7
95.7
95.8
96.0
96.3
96.4
96.7
96.8
96.9
97.2
97.3
97.4
97.6
97.7
97.8
η
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.65
0.68
0.80
0.81
0.79
0.81
0.82
0.81
0.82
0.82
0.82
0.81
0.81
0.82
0.84
0.84
0.86
0.86
0.87
0.86
0.88
0.85
0.85
0.86
0.85
0.86
0.86
0.86
0.86
0.87
0.90
0.87
0.87
0.87
0.89
0.89
0.89
0.89
0.89
0.89
0.81
1.11
1.38
1.81
2.57
3.37
4.60
6.33
8.22
11.0
15.0
15.1
21.9
29.3
35.1
41.3
54.4
67.1
80.3
99
131
163
198
232
285
386
484
547
615
682
732
844
949
1068
681*
765*
849*
1060*
1186*
1354*
1.69
2.51
3.75
5.04
7.40
10.1
14.6
19.9
26.4
36.2
49.4
49.2
71.9
98.1
121
143
194
240
291
355
484
578
707
849
1029
1410
1769
2000
2256
2538
2820
3155
3553
3999
4506
5066
5629
7036
7880
9000
4.2
4.4
5.9
5.9
6.1
6.2
5.9
5.9
6.8
6.2
6.3
5.2
6.4
6.2
6.3
6.4
6.5
6.5
7.3
7.0
7.1
6.5
6.2
6.5
6.9
6.2
6.2
6.2
5.6
5.6
5.9
5.9
5.9
6.7
6.0
6.3
6.1
4.7
5.0
5.2
2.5
2.6
2.7
2.7
3.0
3.2
2.8
2.7
2.8
2.5
2.6
2.0
2.7
2.5
2.4
2.6
2.3
2.4
2.6
2.5
2.7
2.6
2.5
2.5
2.6
1.9
2.0
1.9
2.0
2.0
1.3
2.1
2.1
1.0
1.0
1.1
1.1
0.6
0.7
0.7
2.0
2.0
2.5
2.5
3.0
3.2
2.9
2.9
3.0
2.6
2.8
2.1
2.9
2.5
2.5
2.7
2.8
2.8
2.7
2.3
2.4
2.6
2.5
2.6
2.7
2.4
2.4
2.3
2.5
2.4
2.9
2.4
2.5
2.6
2.8
2.9
2.9
2.2
2.4
2.5
0.00097
0.00097
0.00245
0.00245
0.0034
0.0034
0.0075
0.0075
0.0125
0.032
0.032
0.063
0.075
0.09
0.11
0.18
0.32
0.41
0.55
0.89
1.06
2.1
2.1
3.1
3.3
6.1
7.4
8.3
9.4
10
11
11
13
18
29
33
37
47
53
60
19
19
24
24
36
36
56
56
68
101
101
123
135
148
177
205
302
332
370
525
584
780
780
965
1001
1690
1880
2100
2250
2360
2430
2700
2900
3100
4250
4530
4860
6200
6620
7140
4 poles
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
220
276
312
352
396
440
492
554
624
704
792
880
1100
1232
1408
* 690 V
71 MA4
71 MB4
80 MA4
80 MB4
90 S4
90 L4
100 LA4
100 LB4
112 M4
132 SA4
132 MA4
160 M4
160 L4
180 M4
180 L4
200 L4
225 S4
225 M4
250 M4
280 S4
280 M4
315 SM4
315 MA4
315 MD4
315 ML4
355 LA4
355 LB4
355 LC4
355 LD4
355 LE4
355 LF4
400 LA4
400 LB4
400 LC4
450 LA4
450 LB4
450 LC4
500 LA4
500 LB4
500 LC4
17
55°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
η
[rpm]
[%]
930
930
920
920
930
940
950
950
960
965
967
970
970
972
975
975
980
980
985
985
985
985
985
990
990
990
990
992
992
993
994
994
994
994
995
995
995
64.5
66.9
66.7
69.9
76.6
80.3
84.7
85.0
85.4
86.0
88.0
88.2
88.2
89.0
90.5
91.0
92.5
93.0
93.8
93.8
94.3
94.6
94.6
95.3
95.5
95.5
95.6
96.2
96.4
96.5
96.5
96.7
97.0
97.1
97.2
97.3
97.5
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.60
0.69
0.72
0.74
0.77
0.77
0.75
0.75
0.76
0.82
0.82
0.82
0.83
0.83
0.84
0.84
0.83
0.84
0.83
0.84
0.84
0.85
0.84
0.85
0.85
0.86
0.87
0.84
0.85
0.84
0.87
0.85
0.85
0.85
0.86
0.87
0.87
1.38
1.72
2.25
3.07
3.67
5.14
6.82
9.06
12.2
11.3
15.0
22.0
29.6
36.1
41.8
56.6
69.6
83.1
102
137
164
197
240
314
391
485
541
629
698
783
846
973
1092
1231
837*
957*
1128*
3.80
5.65
7.78
11.4
15.4
22.3
30.2
40.2
54.7
54.4
74.1
108
148
182
215
294
361
438
533
727
873
1066
1280
1698
2122
2662
3009
3388
3812
4231
4727
5322
5995
6763
8023
9290
10979
3.7
3.9
4.0
4.2
3.8
4.0
4.5
4.6
4.6
5.0
5.5
5.2
5.2
5.5
6.2
6.5
6.0
6.0
6.3
6.0
6.0
6.3
6.9
6.0
6.0
6.3
6.5
6.2
6.5
6.9
6.2
5.6
5.9
5.6
4.7
4.8
5.0
2.0
2.0
2.1
2.3
2.0
1.5
2.0
2.0
1.9
2.0
2.3
2.3
2.1
2.4
2.4
2.6
2.5
2.5
2.6
2.5
2.5
2.5
2.6
2.1
2.1
2.3
2.3
1.6
1.7
1.8
1.5
1.1
1.1
1.1
0.7
0.7
0.9
1.8
1.9
2.3
2.4
1.9
1.6
2.3
2.4
2.5
2.3
2.5
2.2
2.3
2.4
2.4
2.6
2.5
2.5
2.6
2.5
2.5
2.5
2.8
2.1
2.1
2.3
2.4
2.6
2.6
2.7
2.7
2.6
2.7
2.6
2.2
2.3
2.3
0.0029
0.0029
0.0037
0.0037
0.0075
0.0125
0.039
0.039
0.039
0.087
0.11
0.13
0.17
0.22
0.47
0.57
0.85
1.1
2.6
2.6
3.0
3.6
4.7
10.5
13.1
17.0
18.6
17.5
19.5
22.0
30.0
41.0
46.0
51.0
71.0
82.0
97.0
25
25
42
42
56
71
106
106
106
131
147
165
185
203
309
342
479
518
748
748
768
889
1031
1160
1890
2315
2390
2680
2850
3070
3200
4300
4600
4950
6000
6570
7300
6 poles
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
176
220
276
312
352
396
440
492
554
624
704
836
968
1144
* 690 V
18
80 MA6
80 MB6
90 S6
90 L6
100 LA6
112 M6
132 SA6
132 MA6
132 MB6
160 M6
160 L6
180 L6
200 LA6
200 LB6
225 M6
250 M6
280 S6
280 M6
315 SM6
315 MA6
315 MB6
315 MC6
315 ML6
355 LA6
355 LB6
355 LC6
355 LD6
400 LA6
400 LB6
400 LC6
400 LD6
450 LA6
450 LB6
450 LC6
500 LA6
500 LB6
500 LC6
55°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
[rpm]
[%]
680
690
675
680
680
695
700
710
710
710
720
720
725
725
730
730
730
735
735
740
740
740
740
740
740
740
740
740
743
743
743
745
745
745
745
745
746
49.3
53.8
55.9
60.9
67.6
70.2
75.8
80.7
81.0
81.5
82.4
84.7
86.7
88.0
89.0
90.0
91.0
92.5
93.0
93.5
93.8
94.4
94.5
94.6
95.3
95.4
95.7
95.7
95.7
95.9
96.0
96.5
96.6
96.7
97.0
97.1
97.2
η
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.65
0.68
0.66
0.69
0.66
0.66
0.71
0.70
0.70
0.73
0.74
0.74
0.75
0.75
0.76
0.76
0.76
0.80
0.80
0.81
0.82
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.82
0.82
0.82
0.84
0.85
0.85
0.85
0.86
0.86
0.81
0.99
1.45
1.89
2.43
3.43
4.02
5.62
6.36
7.28
9.47
12.7
16.6
24.1
32.0
39.0
45.9
58.5
71.8
85.8
103
138
166
202
255
321
400
502
574
646
726
783
865
973
633*
705*
793*
2.53
3.46
5.23
7.72
10.5
15.1
20.5
29.6
33.6
40.3
53.1
72.9
99
145
196
242
288
390
481
581
710
968
1161
1419
1807
2271
2839
3562
4010
4524
5090
5640
6306
7101
7998
9024
10138
2.6
2.7
2.8
2.9
2.7
2.7
2.8
3.2
3.1
4.2
4.2
4.2
4.5
5.0
5.2
5.3
5.5
6.0
6.0
6.5
6.0
6.2
6.2
6.2
5.2
5.0
5.2
5.4
5.4
5.6
5.2
4.8
4.7
4.7
4.7
4.7
5.0
1.9
1.9
2.0
2.0
1.5
1.4
1.2
1.5
1.4
1.9
1.9
2.0
2.0
2.1
2.2
2.2
2.3
2.5
2.5
2.3
2.1
2.2
2.2
2.3
2.2
2.1
2.1
1.6
1.4
1.4
1.3
1.0
1.0
1.0
0.7
0.7
0.9
1.9
1.9
2.0
2.1
1.9
1.8
1.7
1.7
1.6
2.1
2.1
2.1
2.2
2.3
2.4
2.4
2.5
2.5
2.5
2.4
2.2
2.3
2.3
2.3
2.2
2.2
2.1
2.7
2.4
2.4
2.3
2.1
2.1
2.1
2.3
2.3
2.3
0.0029
0.0029
0.0037
0.0037
0.0075
0.0075
0.0132
0.039
0.039
0.080
0.092
0.11
0.16
0.22
0.42
0.52
0.62
1.05
1.25
2.8
2.8
3.5
4.0
4.3
12.7
15.4
18.8
21.4
26
30
33
55
61
69
95
110
122
25
25
42
42
56
56
71
106
106
115
123
133
188
216
294
326
356
520
553
776
776
886
924
993
1710
1910
2240
2390
2850
3070
3230
4350
4620
5020
6180
6750
7230
8 poles
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
2.5
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
140
176
220
276
312
352
396
440
492
554
624
704
792
* 690 V
80 MA8
80 MB8
90 S8
90 L8
100 LA8
100 LB8
112 M8
132 SA8
132MA8
160 MA8
160 MB8
160 L8
180 L8
200 L8
225 S8
225 M8
250 M8
280 S8
280 M8
315 SM8
315 MA8
315 MC8
315 MD8
315 ME8
355 LA8
355 LB8
355 LC8
355 LD8
400 LA8
400 LB8
400 LC8
450 LA8
450 LB8
450 LC8
500 LA8
500 LB8
500 LC8
19
ELECTRIC DATA TABLES - MAINS SUPPLY IE2
40°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
Speed
Efficiency
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
η
η 3/4
η 1/2
[rpm]
[%]
[%]
[%]
80 MA2
80 MB2
90 S2
100 LA2
112 M2
112 M2
132 SA2
132 SB2
160 MA2
160 MB2
160 L2
180 M2
200 LA2
200 LB2
225 M2
250 M2
280 S2
280 M2
315 MA2
315 MB2
315 MC2
315 LA2
355 LA2
355 LB2
355 LC2
2842
2842
2875
2883
2892
2892
2925
2925
2925
2920
2925
2950
2950
2940
2960
2960
2960
2960
2975
2980
2980
2980
2980
2980
2980
80.0
82.5
84.0
85.5
87.6
87.5
88.5
89.5
89.5
90.4
91.2
91.5
92.4
92.6
93.4
94.0
94.1
94.4
94.6
95.0
95.3
95.5
95.5
95.6
95.6
78.0
81.0
84.0
85.0
86.0
86.5
87.0
88.0
90.3
91.1
92.1
92.0
93.0
93.2
92.9
94.5
94.5
95.0
94.4
94.8
95.7
95.3
95.3
95.7
95.5
76.0
80.0
83.0
84.0
85.0
85.0
86.0
86.0
89.0
90.6
91.9
91.4
92.2
93.0
92.0
94.1
94.2
94.8
93.7
93.3
94.8
94.0
94.5
95.2
94.6
0.83
0.83
0.88
0.86
0.88
0.87
0.91
0.90
0.86
0.85
0.87
0.90
0.89
0.90
0.87
0.88
0.90
0.91
0.88
0.85
0.86
0.85
0.89
0.90
0.89
1.63
2.32
2.93
4.32
5.62
7.58
9.86
13.4
20.6
28.2
33.7
38.6
52.7
64.1
79.9
96.0
128
151
191
236
282
356
425
528
602
2.52
3.70
4.98
7.29
9.91
13.2
18.0
24.5
35.9
49.1
60.4
71.2
97.1
120
145
177
242
290
353
423
513
641
801
1009
1138
6.2
6.4
7.4
7.7
7.5
7.5
7.2
7.2
6.6
6.4
7.4
7.0
6.4
6.9
7.1
6.6
6.3
6.8
6.8
6.0
6.5
7.2
7.0
7.1
7.2
2.8
3.0
3.7
3.1
2.7
2.7
2.7
2.7
2.2
2.2
2.5
2.0
2.2
2.4
2.5
2.3
2.2
2.0
2.0
1.8
2.0
2.2
2.3
2.2
2.1
2.9
3.1
3.9
3.3
2.9
3.0
2.9
2.9
3.4
3.1
3.3
2.8
3.1
2.8
3.3
3.1
2.7
2.4
2.0
1.7
1.9
2.2
2.3
2.2
2.2
0.00092
0.00092
0.00175
0.0037
0.0060
0.0060
0.0171
0.0171
0.035
0.040
0.048
0.165
0.180
0.190
0.250
0.290
0.416
0.55
0.95
1.12
1.13
1.6
3.7
4.5
5.2
23
23
35
53
62
62
99
99
150
160
170
205
250
260
335
380
535
545
800
870
900
1115
1620
1810
2030
90 L4
100 LA4
100 LB4
100 LB4
112 M4
112 M4
132 S4
160 M4
160 M4
160 L4
180 M4
180 L4
200 L4
225 S4
225 M4
250 M4
280 S4
280 M4
315 MA4
315 MB4
315 MC4
315 LA4
355 LA4
355 LB4
355 LC4
1429
1442
1442
1446
1446
1446
1467
1471
1470
1470
1465
1470
1465
1480
1475
1480
1480
1480
1485
1490
1490
1490
1490
1490
1490
82.5
84.0
84.0
87.5
87.5
87.5
89.5
90.0
90.3
90.6
91.3
92.0
92.4
93.1
93.2
93.7
94.3
94.5
94.7
95.2
95.6
95.8
95.7
95.7
95.8
81.5
83.0
82.5
87.0
87.0
86.0
88.0
89.0
90.4
90.8
92.0
92.4
93.0
93.3
93.7
93.9
94.8
95.9
94.8
95.3
95.6
95.8
95.5
95.4
95.6
80.5
82.0
81.0
85.0
85.0
84.0
86.0
87.0
89.1
90.5
92.2
91.7
92.7
93.0
93.6
94.1
94.6
94.8
94.3
94.6
94.8
95.5
94.4
94.2
94.7
0.82
0.82
0.82
0.80
0.83
0.81
0.84
0.83
0.81
0.82
0.87
0.86
0.86
0.86
0.88
0.87
0.90
0.89
0.85
0.85
0.85
0.85
0.86
0.86
0.86
1.60
2.31
3.14
4.54
5.96
8.15
10.6
14.5
21.7
29.1
33.6
40.1
54.5
66.7
79.2
97.4
128
155
197
236
284
355
438
552
622
5.01
7.28
9.93
14.5
19.8
26.4
35.8
48.7
71.5
97.4
121
143
196
239
291
355
484
581
708
846
1025
1282
1602
2019
2275
6.2
6.0
6.1
6.0
6.8
6.9
6.3
7.5
6.5
6.6
6.0
6.8
6.0
6.4
6.2
7.2
7.2
6.9
6.0
6.5
6.4
6.5
6.2
6.2
6.2
3.0
2.9
2.8
2.7
2.8
2.7
2.5
2.7
2.5
2.5
2.3
2.5
2.6
2.0
2.0
2.8
2.6
2.5
1.9
2.2
2.1
2.3
1.9
2.0
1.9
3.2
3.0
2.9
2.9
3.0
2.8
2.6
3.2
3.1
2.7
2.6
3.0
2.9
2.5
2.4
2.9
2.3
2.5
2.0
2.0
2.0
2.0
2.4
2.4
2.3
0.0034
0.0075
0.0075
0.0075
0.0125
0.0125
0.032
0.075
0.075
0.09
0.11
0.18
0.22
0.41
0.52
0.58
1.06
1.15
2.1
2.5
3.1
3.4
6.1
7.4
8.3
36
56
56
56
68
68
101
160
160
180
215
225
250
360
390
415
590
615
825
905
1025
1110
1690
1880
2100
[kW]
2 poles
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
4 poles
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
20
ELECTRIC DATA TABLES - MAINS SUPPLY IE2
40°C 2-4-6-8 poles - 400 V - 50 Hz
Rated
output
Motor
Type
[kW]
Speed
Efficiency
η
η 3/4
η 1/2
[rpm]
[%]
[%]
[%]
942
942
950
958
958
958
979
975
970
975
975
975
980
980
985
985
990
990
990
990
990
990
990
990
990
80.0
85.5
86.5
87.5
87.5
87.5
88.0
88.7
89.0
90.0
90.8
91.0
91.9
92.3
92.9
93.3
93.9
94.2
94.4
94.8
95.0
95.3
95.5
95.5
95.6
79.0
83.0
84.0
86.0
86.0
85.0
88.0
89.2
90.1
90.5
92.0
92.3
93.0
93.5
93.2
93.7
94.0
94.8
94.6
95.0
95.3
95.0
95.3
95.6
95.4
78.0
81.0
82.0
84.0
84.2
84.0
85.5
88.3
89.9
90.8
91.5
92.6
93.3
93.0
92.7
93.2
92.0
94.3
94.0
94.7
94.9
93.8
94.2
94.9
94.4
Power
factor
cos φ
Rated
current
I
[A]
Rated
torque
Tn
[N m]
Starting
current
Is/In
p.u.
Starting
torque
Ts/Tn
p.u.
Breakdown
torque
Tmax/Tn
p.u.
Moment
of inertia
J
[kg m2]
Weight
IM 1001
Approx.
[kg]
0.78
0.77
0.78
0.76
0.76
0.77
0.81
0.80
0.80
0.84
0.83
0.83
0.84
0.82
0.84
0.84
0.87
0.85
0.87
0.86
0.86
0.85
0.85
0.86
0.87
1.73
2.41
3.21
4.78
6.51
8.57
11.1
15.3
22.3
28.6
35.4
42.0
56.1
70.6
83.2
101
133
162
193
234
283
356
445
554
616
7.60
11.2
15.1
21.9
29.9
39.9
53.6
73.5
108
147
181
216
292
361
436
533
723
868
1061
1273
1543
1929
2411
3038
3424
4.0
4.1
4.0
4.5
4.7
4.7
7.5
7.3
7.0
6.9
6.8
6.6
7.3
6.9
6.7
6.8
7.0
7.2
6.8
6.9
7.2
6.0
6.0
6.3
6.5
2.0
2.0
1.8
2.0
2.1
2.0
2.5
2.5
2.5
2.3
2.4
2.3
2.2
2.6
2.3
2.4
2.4
2.7
2.4
2.6
2.6
2.1
2.1
2.3
2.3
2.0
2.1
1.9
2.3
2.1
2.3
2.8
3.4
3.1
2.6
2.9
2.8
2.9
2.7
2.4
2.4
2.3
2.3
2.1
2.1
2.2
2.1
2.1
2.3
2.4
0.0075
0.0075
0.0125
0.039
0.039
0.039
0.11
0.11
0.15
0.21
0.26
0.28
0.58
0.74
1.15
1.38
3.4
4.1
4.7
6.0
6.7
10.5
13.1
17.0
18.6
56
56
71
106
106
106
165
165
175
225
245
255
345
420
545
580
850
960
1115
1160
1280
1160
1890
2315
2390
6 poles
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
100 LA6
100 LB6
112 M6
132 SA6
132 MA6
132 MB6
160 M6
160 M6
160 L6
180 L6
200 LA6
200 LB6
225 M6
250 M6
280 S6
280 M6
315 MA6
315 MB6
315 MC6
315 LA6
315 LB6
355 LA6
355 LB6
355 LC6
355 LD6
21
ELECTRIC DATA TABLES - INVERTER SUPPLY
40°C 2-4-6-8 poles - 400 V - 50 Hz
Load
Characteristic
Cooling1
Frequency / Ratio
Motor
Type
Quadratic
Constant
Constant
Constant
IC 411
5 - 50Hz / 1 : 10
Output
Torque
kW
Nm
IC 411
20 - 50Hz / 1 : 2.5
Output
Torque
kW
Nm
IC 411
10 - 50Hz / 1 : 5
Output
Torque
kW
Nm
IC 411
5 - 50Hz / 1 : 10
Output
Torque
kW
Nm
2 poles
71 MA2
71 MB2
80 MA2
80 MB2
90 S2
90 L2
100 LA2
112 M2
132 SA2
132 SB2
132 MB2
160MA2
160 MB2
160 L2
180 M2
200 LA2
200 LB2
225 M2
250 M2
280 S2
280 M2
315 SM2
315 MA2
315 MD2
315 ML2
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
9
8,8
12
15
18
24
30
36
44
60
72
88
106
128
160
0,99
1,5
2
2,9
4
5,9
8
11
14
20
24
29
39
48
58
78
96
116
142
194
232
282
339
410
512
0,24
0,36
0,49
0,72
0,98
1,4
2
2,6
3,6
4,9
5,9
7,2
9,8
12
14
20
24
29
36
49
58
72
86
104
130
0,81
1,2
1,6
2,4
3,2
4,8
6,5
8,6
12
16
19
23
32
39
47
63
78
94
115
157
188
229
276
333
416
0,20
0,30
0,41
0,61
0,82
1,2
1,6
2,2
3
4,1
5
6,1
8,2
10
12
16
20
25
30
41
50
61
73
88
110
0,68
1
1,4
2
2,7
4
5,5
7,3
9,9
13
16
20
27
33
40
53
66
80
97
133
160
194
233
282
352
0,17
0,25
0,34
0,5
0,68
0,99
1,4
1,8
2,5
3,4
4
5
6,8
8,3
9,9
14
17
20
25
34
40
50
59
72
90
0,56
0,83
1,1
1,6
2,2
3,3
4,5
5,9
8,1
11
13
16
22
27
32
44
54
65
80
109
130
159
191
230
288
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
8,8
12
15
18
24
30
36
44
60
72
88
106
128
160
1,4
2
3
4
5,9
8,1
12
16
21
29
40
58
78
97
114
156
191
233
285
386
464
564
678
822
1028
0,16
0,24
0,36
0,49
0,72
0,98
1,4
2
2,6
3,6
4,9
7,2
9,8
12
14
20
24
29
36
49
58
72
86
104
130
1,1
1,6
2,4
3,3
4,8
6,6
9,5
13
17
24
32
47
64
79
93
127
155
189
231
314
377
458
551
668
835
0,14
0,20
0,30
0,41
0,61
0,82
1,2
1,6
2,2
3
4,1
6,1
8,2
10
12
16
20
25
30
41
50
61
73
88
110
0,93
1,4
2
2,8
4,1
5,6
8
11
15
20
27
40
54
67
79
107
131
160
196
266
319
388
466
565
707
0,11
0,17
0,25
0,34
0,50
0,68
0,99
1,4
1,8
2,5
3,4
5
6,8
8,3
9,9
14
17
20
25
34
40
50
59
72
90
0,76
1,1
1,7
2,3
3,3
4,5
6,6
9
12
16
22
32
44
54
64
88
108
131
160
217
261
317
382
463
578
4 poles
71 MA4
71 MB4
80 MA4
80 MB4
90 S4
90 L4
100 LA4
100 LB4
112 M4
132 SA4
132 MA4
160 M4
160 L4
180 M4
180 L4
200 L4
225 S4
225 M4
250 M4
280 S4
280 M4
315 SM4
315 MA4
315 MD4
315 ML4
For bigger frame sizes or different applications: contact MarelliMotori
22
ELECTRIC DATA TABLES - INVERTER SUPPLY
40°C 2-4-6-8 poles - 400 V - 50 Hz
Load
Characteristic
Cooling1
Frequency / Ratio
Motor
Type
Quadratic
Constant
Constant
Constant
IC 411
5 - 50Hz / 1 : 10
Output
Torque
kW
Nm
IC 411
20 - 50Hz / 1 : 2.5
Output
Torque
kW
Nm
IC 411
10 - 50Hz / 1 : 5
Output
Torque
kW
Nm
IC 411
5 - 50Hz / 1 : 10
Output
Torque
kW
Nm
6 poles
80 MA6
80 MB6
90 S6
90 L6
100 LA6
112 M6
132 SA6
132 MA6
132 MB6
160 M6
160 L6
180 L6
200 LA6
200 LB6
225 M6
250 M6
280 S6
280 M6
315 SM6
315 MA6
315 MB6
315 MC6
315 ML6
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
6
8,8
12
15
18
24
30
36
44
60
72
88
106
128
3
4,5
6,2
9,1
12
18
24
32
44
59
86
118
146
173
235
290
350
428
581
698
852
1022
1240
0,24
0,36
0,49
0,72
0,98
1,4
2
2,6
3,6
4,9
7,2
9,8
12
14
20
24
29
36
49
58
72
86
104
2,5
3,6
5,1
7,4
10
14
20
26
36
48
70
96
118
140
191
235
285
348
472
567
692
831
1008
0,20
0,30
0,41
0,61
0,82
1,2
1,6
2,2
3
4,1
6,1
8,2
10
12
16
20
25
30
41
50
61
73
88
2,1
3,1
4,3
6,3
8,5
12
17
22
30
41
59
81
100
119
162
199
241
294
399
480
586
703
853
0,17
0,25
0,34
0,50
0,68
0,99
1,4
1,8
2,5
3,4
5
6,8
8,3
9,9
14
17
20
25
34
40
50
59
72
1,7
2,5
3,5
5,1
6,9
10
14
18
25
33
49
66
82
97
132
163
197
241
327
392
479
575
698
0,18
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
3,2
4,4
6
8,8
12
15
18
24
30
36
44
60
72
88
106
2
2,8
4,2
6,2
8,4
12
16
24
32
43
58
79
116
158
194
230
314
384
467
567
774
928
1134
1362
0,12
0,16
0,24
0,36
0,49
0,72
0,98
1,4
2
2,6
3,6
4,9
7,2
9,8
12
14
20
24
29
36
49
58
72
86
1,6
2,3
3,4
5
6,8
9,8
13
19
26
35
47
64
94
128
157
187
255
312
380
461
629
754
922
1106
0,10
0,14
0,20
0,30
0,41
0,61
0,82
1,2
1,6
2,2
3
4,1
6,1
8,2
10
12
16
20
25
30
41
50
61
73
1,4
1,9
2,9
4,2
5,8
8,3
11
16
22
30
40
54
80
108
133
158
216
264
321
390
532
638
780
936
0,08
0,11
0,17
0,25
0,34
0,50
0,68
0,99
1,4
1,8
2,5
3,4
5
6,8
8,3
9,9
14
17
20
25
34
40
50
59
1,1
1,6
2,3
3,5
4,7
6,8
9,2
13
18
24
33
45
65
89
109
130
176
216
263
319
435
522
638
766
8 poles
80 MA8
80 MB8
90 S8
90 L8
100 LA8
100 LB8
112 M8
132 SA8
132MA8
160 MA8
160 MB8
160 L8
180 L8
200 L8
225 S8
225 M8
250 M8
280 S8
280 M8
315 SM8
315 MA8
315 MC8
315 MD8
315 ME8
For bigger frame sizes or different applications: contact MarelliMotori
23
DIMENSIONS
B3 mounting 71-132 mm
Type
71
80
M
M
S
L
L
M
S
M
M
L
M*
M
L
L*
L
M
S-M
90
100
112
132
160
180
200
225
M*
250
M
S
280
M
SM-MC
315
MD
L
Poles
A
AA
AB
AC
B
BA
BB
BC
BA’
C
CA
H
HA
HD
K
L
LC
W
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-4
2-4
4-8
2-8
2-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
8
2
4-6
112
125
140
140
160
190
216
216
254
254
279
279
279
318
318
356
356
406
406
406
406
457
457
457
457
508
508
508
508
508
29
31
34
34
36
40
45
45
55
55
58
58
58
63
63
76
76
90
90
90
90
90
90
90
90
110
110
110
110
110
138
156
172
172
196
225
255
255
300
300
324
324
324
368
368
405
405
465
465
465
465
540
540
540
540
590
590
590
590
590
146
166
184
184
204
228
258
258
314
314
314
354
354
354
354
411
411
411
411
411
411
490
490
490
490
604
604
604
604
604
90
100
100
125
140
140
140
178
210
254
241
241
279
305
305
311
311
349
349
349
349
368
368
419
416
457
457
457
508
508
60
60
65
70
70
75
75
80
80
95
95
95
95
110
110
110
110
110
110
110
110
110
112
126
152
152
172
172
214
214
296
296
283
320
320
350
350
360
360
406
406
406
406
480
480
480
480
520
520
520
582
582
11
13
13.5
13.5
16
16
18
18
21
21
20.5
20.5
20.5
22.5
22.5
24.5
24.5
28.5
28.5
28.5
28.5
30.5
30.5
30.5
30.5
32
32
32
32
32
95
95
65
90
90
75
75
80
80
95
95
95
95
110
110
110
110
165
165
165
200
200
45
50
56
56
63
70
89
89
108
108
121
121
121
133
133
149
149
168
168
168
168
190
190
190
190
216
216
216
216
216
120
150
184
159
187
195
246
208
223
179
179
254
216
178
220
255
255
178
178
223
223
272
272
221
221
299
299
299
398
398
71
80
90
90
100
112
132
132
160
160
180
180
180
200
200
225
225
250
250
250
250
280
280
280
280
315
315
315
315
315
8
8
10
10
12
13
15
15
22
22
22
22
22
24
24
28
28
28
28
28
28
40
40
40
40
43
43
43
43
43
200
214
298
298
315
338
373
373
446
446
466
488
488
508
508
593
593
618
618
618
618
710
710
710
710
820
820
820
862
862
7
10
10
10
12
12
12
12
14.5
14.5
14.5
14.5
14.5
18.5
18.5
18.5
18.5
22
22
22
22
24
24
24
24
27
27
27
27
27
280
335
385
385
445
460
550
550
648
648
648
723
723
723
764
820
850
830
830
875
875
959
959
959
959
1102
1132
1132
1252
1282
315
380
440
440
510
525
635
635
761
761
761
836
836
836
877
935
965
945
945
990
990
1110
1110
1110
1110
1252
1282
1282
1402
1432
131
141
160
160
175
175
205
205
279
279
279
296
296
296
296
288
318
318
318
318
318
350
350
350
350
387
417
417
402
432
Poles
D
E
F
EA
FA
GC
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-8
14
19
24
24
28
28
38
38
42
42
48
48
55
55
60
60
65
65
75
65
75
65
80
90
70
90
30
40
50
50
60
60
80
80
110
110
110
110
110
110
140
140
140
140
140
140
140
140
170
170
140
170
5
6
8
8
8
8
10
10
12
12
14
14
16
16
18
18
18
18
20
18
20
18
22
25
20
25
30
40
50
50
60
60
80
80
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
140
5
6
8
8
8
8
10
10
12
12
12
12
12
16
16
16
16
18
18
18
18
18
18
18
18
18
16
21,5
27
27
31
31
41
41
45
45
45
45
45
59
59
59
59
64
64
64
64
64
69
69
64
69
2-8
* Not IE2
Type
71
80
90
100
112
132
160
180
200
225
250
M
M
S
L
L
M
S
M
M
L
M
L
L
M
S-M
M
S
280
M
SM-MC
315
MD
L
* Not IE2
24
2-8
2-4
4-8
2-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
8
2
4-6
Shaft Extension
GA
DA
16
21,5
27
27
31
31
41
41
45
45
51,5
51,5
59
59
64
64
69
69
79,5
69
79,5
69
85
95
74,5
95
14
19
24
24
28
28
38
38
42
42
42
42
42
55
55
55
55
60
60
60
60
60
65
65
60
65
B35 mounting 71-132 mm
Motor Type
71
80
90
100
112
132
160
180
200
225
M
M
S
L
L
M
S
M
M
L
M*
M
L
L*
L
M
S-M
M*
250
M
S
280
M
SM-MC
315
MD
L
Poles
A
AA
AB
AC
B
BA
BB
BC
BA’
C
CA
H
HA
HD
K
L
LC
W
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-4
2-4
4-8
2-8
2-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
8
2
4-6
112
125
140
140
160
190
216
216
254
254
279
279
279
318
318
356
356
406
406
406
406
457
457
457
457
508
508
508
508
508
29
31
34
34
36
40
45
45
55
55
58
58
58
63
63
76
76
90
90
90
90
90
90
90
90
110
110
110
110
110
138
156
172
172
196
225
255
255
300
300
324
324
324
368
368
405
405
465
465
465
465
540
540
540
540
590
590
590
590
590
146
166
184
184
204
228
258
258
314
314
314
354
354
354
354
411
411
411
411
411
411
490
490
490
490
604
604
604
604
604
90
100
100
125
140
140
140
178
210
254
241
241
279
305
305
311
311
349
349
349
349
368
368
419
416
457
457
457
508
508
60
60
65
70
70
75
75
80
80
95
95
95
95
110
110
110
110
110
110
110
110
110
112
126
152
152
172
172
214
214
296
296
283
320
320
350
350
360
360
406
406
406
406
480
480
480
480
520
520
520
582
582
11
13
13.5
13.5
16
16
18
18
21
21
20.5
20.5
20.5
22.5
22.5
24.5
24.5
28.5
28.5
28.5
28.5
30.5
30.5
30.5
30.5
32
32
32
32
32
95
95
65
90
90
75
75
80
80
95
95
95
95
110
110
110
110
165
165
165
200
200
45
50
56
56
63
70
89
89
108
108
121
121
121
133
133
149
149
168
168
168
168
190
190
190
190
216
216
216
216
216
120
150
184
159
187
195
246
208
223
179
179
254
216
178
220
255
255
178
178
223
223
272
272
221
221
299
299
299
398
398
71
80
90
90
100
112
132
132
160
160
180
180
180
200
200
225
225
250
250
250
250
280
280
280
280
315
315
315
315
315
8
8
10
10
12
13
15
15
22
22
22
22
22
24
24
28
28
28
28
28
28
40
40
40
40
43
43
43
43
43
200
214
298
298
315
338
373
373
446
446
466
488
488
508
508
593
593
618
618
618
618
710
710
710
710
820
820
820
862
862
7
10
10
10
12
12
12
12
14.5
14.5
14.5
14.5
14.5
18.5
18.5
18.5
18.5
22
22
22
22
24
24
24
24
27
27
27
27
27
280
335
385
385
445
460
550
550
648
648
648
723
723
723
764
820
850
830
830
875
875
959
959
959
959
1102
1132
1132
1252
1282
315
380
440
440
510
525
635
635
761
761
761
836
836
836
877
935
965
945
945
990
990
1110
1110
1110
1110
1252
1282
1282
1402
1432
131
141
160
160
175
175
205
205
279
279
279
296
296
296
296
288
318
318
318
318
318
350
350
350
350
387
417
417
402
432
Poles
D
E
F
GA
DA
EA
FA
GC
LA
M
N
P
S
T
M
N
P
S
T
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-8
14
19
24
24
28
28
38
38
42
42
48
48
55
55
60
60
65
65
75
65
75
65
80
90
70
90
30
40
50
50
60
60
80
80
110
110
110
110
110
110
140
140
140
140
140
140
140
140
170
170
140
170
5
6
8
8
8
8
10
10
12
12
14
14
16
16
18
18
18
18
20
18
20
18
22
25
20
25
16
21.5
27
27
31
31
41
41
45
45
51.5
51.5
59
59
64
64
69
69
79.5
69
79.5
69
85
95
74.5
95
14
19
24
24
28
28
38
38
42
42
42
42
42
55
55
55
55
60
60
60
60
60
65
65
60
65
30
40
50
50
60
60
80
80
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
140
5
6
8
8
8
8
10
10
12
12
12
12
12
16
16
16
16
18
18
18
18
18
18
18
18
18
16
21.5
27
27
31
31
41
41
45
45
45
45
45
59
59
59
59
64
64
64
64
64
69
69
64
69
7
10
10
10
14
14
14
14
15
15
14
14
15
16
16
18
18
18
18
18
18
22
22
22
22
22
130
165
165
165
215
215
265
265
300
300
300
300
350
400
400
500
500
500
500
500
500
600
600
600
600
600
110
130
130
130
180
180
230
230
250
250
250
250
300
350
350
450
450
450
450
450
450
550
550
550
550
550
160
200
200
200
250
250
300
300
350
350
350
350
400
450
450
550
550
550
550
550
550
660
660
660
660
660
10
12
12
12
14.5
14.5
14.5
14.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
22
22
22
22
22
3.5
3.5
3.5
3.5
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
85
100
115
115
130
130
165
165
-
70
80
95
95
110
110
130
130
-
105
120
140
140
160
160
200
200
-
M6
M6
M8
M8
M8
M8
M10
M10
-
2.5
3
3
3
3.5
3.5
3.5
3.5
-
2-8
* Not IE2
Shaft extension
Motor Type
71
80
90
100
112
132
160
180
200
225
250
M
M
S
L
L
M
S
M
M
L
M
L
L
M
S-M
M
S
280
M
SM-MC
315
MD
L
2-8
2-4
4-8
2-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
8
2
4-6
Flange B5
Flange B14
* Not IE2
25
B5 - B14 - V1 mounting
Motor Type Poles AC
AD
L
LC
LD
W
D
E
F
71
80
88
89
158
158
155
148
157
157
286
286
286
308
308
308
308
368
368
368
368
368
368
430
430
430
430
505
505
505
547
547
280
335
385
385
445
460
550
550
648
648
648
723
723
723
764
820
850
875
875
875
875
959
959
959
959
1102
1132
1132
1252
1282
315
380
440
440
510
525
635
635
761
761
761
836
836
836
877
935
965
945
945
990
990
1110
1110
1110
1110
1252
1282
1282
1402
1432
295
350
400
400
460
475
565
565
713
713
710
788
788
788
829
885
915
940
940
940
940
1054
1054
1054
1054
1177
1207
1207
1327
1357
131
141
160
160
175
175
205
205
279
279
279
296
296
296
296
288
318
318
318
318
318
350
350
350
350
387
417
417
402
432
14
19
24
24
28
28
38
38
42
42
48
48
48
55
55
55
60
60
65
60
65
65
75
65
75
65
80
90
70
90
30
40
50
50
60
60
80
80
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
140
140
170
170
140
170
5
6
8
8
8
8
10
10
12
12
14
14
14
16
16
16
18
18
18
18
18
18
20
18
20
18
22
25
20
25
90
100
112
132
160
M
M
S
L
L
M
S
M
M
L
M*
M
L
L*
L
M
S-M
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-8
2-4
2-4
4-8
2-8
200
2-8
2
225
4-8
2
M*
4-8
250
2
M
4-8
2
S
4-8
280
2
M
4-8
2
SM-MC
4-8
315 MD
8
2
L
4-6
180
* Not IE2
26
146
166
184
184
204
228
386
386
314
314
314
354
354
354
354
411
411
411
411
411
411
490
490
490
490
604
604
604
604
604
Shaft extension
GA DA EA
16
21.5
27
27
31
31
41
41
45
45
51.5
51.5
51.5
59
59
59
64
64
69
64
69
69
79.5
69
79.5
69
85
95
74.5
95
14
19
24
24
28
28
38
38
42
42
42
42
42
42
42
55
55
55
55
55
55
60
60
60
60
60
65
65
60
65
30
40
50
50
60
60
80
80
110
110
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
140
FA
GC
LA
M
5
6
8
8
8
8
10
10
12
12
12
12
12
12
12
16
16
16
16
16
16
18
18
18
18
18
18
18
18
18
16
21.5
27
27
31
31
41
41
45
45
45
45
45
45
45
59
59
59
59
59
59
64
64
64
64
64
69
69
64
69
7
10
10
10
14
14
14
14
15
15
14
14
14
15
15
16
16
18
18
18
18
18
18
18
18
22
22
22
22
22
130
165
165
165
215
215
265
265
300
300
300
300
300
350
350
400
400
500
500
500
500
500
500
500
500
600
600
600
600
600
Flange B5
N
P
110
130
130
130
180
180
230
230
250
250
250
250
250
300
300
350
350
450
450
450
450
450
450
450
450
550
550
550
550
550
160
200
200
200
250
250
300
300
350
350
350
350
350
400
400
450
450
550
550
550
550
550
550
550
550
660
660
660
660
660
Flange B14
P
S
S
T
M
N
10
12
12
12
14.5
14.5
14.5
14.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
22
22
22
22
22
3.5
3.5
3.5
3.5
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
85
100
115
115
130
130
165
165
-
70
80
95
95
110
110
130
130
-
T
105 M6 2.5
120 M6
3
140 M8
3
140 M8
3
160 M8 3.5
160 M8 3.5
200 M10 3.5
200 M10 3.5
-
B3 mounting 355-500
Motor Type
Poles
LA - LB 2
LA - LB 4 - 8
355
LC - LE 2
LC - LF 4 - 8
LA - LC 2
400
LA - LD 4 - 8
2
450 LA - LC
4 - 12
500 LA - LC 4 - 8
Motor Type
Poles
LA - LB 2
LA - LB 4 - 12
355
LC - LE 2
LC - LF 4 - 12
LA - LC 2
400
LA - LD 4 - 12
2
450 LA - LC
4 - 12
500 LA - LC 4 - 12
A
AA
AB
AC
AD
B
BA
BB
BC
B’
BA’
C
H
HA
HB
HD
K
L
LC
W
610
610
610
610
686
686
800
800
900
130
130
130
130
140
140
150
150
170
740
740
740
740
830
830
950
950
1050
770
770
770
770
850
850
950
950
1070
267
267
267
267
267
267
620
620
620
630
630
800
800
900
900
1120
1120
1360
208
208
208
208
248
248
251
251
310
818
818
1018
1018
1239
1239
1373
1373
1552
133
133
133
133
155
155
130
130
130
560
560
630
630
710
710
1000
1000
1250
228
228
313
313
458
458
382
382
310
254
254
254
254
280
280
280
280
280
355-1
355-1
355-1
355-1
400-1
400-1
450-1
450-1
500-1
40
40
40
40
42
42
42
42
50
607
607
607
607
657
657
865
865
930
962
962
962
962
1057
1057
1315
1315
1430
28
28
28
28
35
35
35
35
42
1475
1545
1675
1745
1910
1980
2135
2175
2390
1595
1665
1795
1865
2030
2100
2262
2302
2515
435
505
435
505
455
525
510
550
590
D
75m6
100m6
75m6
100m6
75m6
100m6
90m6
120m6
130m6
Shaft extension
E
F
140
210
140
210
140
210
170
210
250
20h9
28h9
20h9
28h9
20h9
28h9
25h9
32h9
32h9
GA
79,5
106
79,5
106
79,5
106
95
127
137
27
B35 mounting 355-450
Motor Type
Poles
LA - LB 2
LA - LB 4 - 8
355
LC - LE 2
LC - LF 4 - 8
LA - LC 2
400
LA - LD 4 - 8
2
450 LA - LC
4-8
500 LA - LC 4 - 8
A
AA
AB
AC
AD
B
BA
BB
BC
B’
BA’
C
H
HA
HB
HD
K
L
LC
W
610
610
610
610
686
686
800
800
900
130
130
130
130
140
140
150
150
170
740
740
740
740
830
830
950
950
1050
770
770
770
770
850
850
950
950
1070
267
267
267
267
267
267
620
620
620
630
630
800
800
900
900
1120
1120
1360
208
208
208
208
248
248
251
251
310
818
818
1018
1018
1239
1239
1373
1373
1552
133
133
133
133
155
155
130
130
130
560
560
630
630
710
710
1000
1000
1250
228
228
313
313
458
458
382
382
310
254
254
254
254
280
280
280
280
280
355-1
355-1
355-1
355-1
400-1
400-1
450-1
450-1
500-1
40
40
40
40
42
42
42
42
50
607
607
607
607
657
657
865
865
930
962
962
962
962
1057
1057
1315
1315
1430
28
28
28
28
35
35
35
35
42
1475
1545
1675
1745
1910
1980
2135
2175
2390
1595
1665
1795
1865
2030
2100
2262
2302
2515
435
505
435
505
455
525
510
550
590
S
T
Shaft extension
Motor Type
D
2
75m6
F
GA
LA
M
N
140
20h9
79,5
25
740
680h6
800
24
6
LA - LB 4 - 8 100
210
28
h9
106
25
740
680h6
800
24
6
LC - LE
m6
355
Flange B5
E
LA - LB
Poles
2
P
75m6
140
20h9
79,5
25
740
680h6
800
24
6
LC - LF 4 - 8 100m6
210
28h9
106
25
740
680h6
800
24
6
LA - LC
h9
2
75
140
20
79,5
28
940
880
1000
28
6
LA - LD 4 - 8 100m6
210
28h9
106
28
940
880h6 1000
28
6
2
90m6
170
25h9
95
30
1080 1000h6 1150
28
6
4 - 8 120m6
210
32h9
127
30
1080 1000h6 1150
28
6
500 LA - LC 4 - 8 130m6
250
32h9
137
30
1080 1000h6 1150
28
6
400
450 LA - LC
28
m6
h6
V1 mounting 355-450
Shaft extension
Motor Type
355
400
450
500
LA - LB
LA - LB
LC - LE
LC - LF
LA - LC
LA - LD
LA - LC
LA - LC
Flange B5
Poles
AC
AD
HB
LC
W
D
E
F
GA
LA
M
N
P
S
T
2
4-8
2
4-8
2
4-8
2
4-8
4-8
770
770
770
770
850
850
950
950
1070
267
267
267
267
267
267
620
620
620
607
607
607
607
657
657
865
865
930
1595
1665
1795
1865
2030
2100
2262
2302
2515
435
505
435
505
455
525
510
550
590
75m6
100m6
75m6
100m6
75m6
100m6
90m6
120m6
130m6
140
210
140
210
140
210
170
210
250
20h9
28h9
20h9
28h9
20h9
28h9
25h9
32h9
32h9
79,5
106
79,5
106
79,5
106
95
127
137
25
25
25
25
28
28
30
30
30
740
740
740
740
940
940
1080
1080
1080
680h6
680h6
680h6
680h6
880h6
880h6
1000h6
1000h6
1000h6
800
800
800
800
1000
1000
1150
1150
1150
24
24
24
24
28
28
28
28
28
6
6
6
6
6
6
6
6
6
29
TOLERANCES
Mechanical
A selection of tolerances, in accordance with IEC 60072-1, are indicated in the following table.
The second shaft extension is built only on request.
Part
Dimension
Tolerance
Shaft Extension
Key
Flange concentricity
Shaft height
D-DA
F-FA
N
H
from 14 to 28mm ∅ k6 / from 55 to 80mm ∅ m6
h9
up to framesize 132 j6 / greater than 132 h6
up to framesize 250 – 0.5mm / greater than 250 – 1mm
Electrical
Electrical tolerances in accordance with standard IEC 60034-1.
Efficiency
-15% of (1 - η) for Pnom ≤ 150 kW
-10% of (1 - η) for Pnom > 150 kW
Power factor
-1/6 (1 - cos φ)
Minmum absolut value 0.02
Maximum absolut value 0.07
Slip
±20% for Pnom ≥ 1 kW
±30% for Pnom < 1 kW
Locked rotor current
+20% of the current
Locked rotor torque
-15% +20% of rated torque
Run up torque
-10% of rated torque
>1,5Mn
Breakdown torque
-10% of the value
Moment of inertia
±10%
Noise
+3 dB (A)
Vibration
+10% of the guaranteed class
ROUTINE, TYPE AND SPECIAL TESTS
Marelli Motori has a state of the art test facility in Arzignano capable of testing motors and generators in their original mounting arrangement (vertical and
horizontal).
Testing can be conducted at 50/60 Hz and variable speed as the facility is provided with a large power – high frequency AFE inverter (regenerative).
Testing is carried out in compliance with all major international standards (IEC, IEEE), customer specifications, marine/navy and ATEX rules.
STANDARD TEST (INCLUDED)
RT01
RT06
RT12
RT13
RT16
Name plate check
Phase sequence
Winding insulation resistance test
High voltage test
No-load run test at nominal voltage
RT02
RT14
RT15
Winding resistance measurement at cold
Auxiliary check
Visual and dimensional check
TT02
TT03
TT04
TT05
TT06
TYPE TEST = ROUTINE TEST (STANDARD included) + following:
Vibration
Over Speed Test
Locked Rotor Test
Load run test at nominal power, voltage and frequency, with measurement of current, power factor and efficiency at 4/4 - 3/4 - 1/2
Heat Run Test
ST04
ST05
ST06
ST07
ST08
ST09
Measurement of noise level
Measurement of dissipation factor tan δ
Partial Discharge test
Measurement of curve C=f(n)
Shaft Voltage Measurement
Visual and Dimensional Check
ROUTINE TEST = STANDARD TEST + following
SPECIAL TEST
All tests are performed in Marelli Motori Test Room, Arzignano plant with complete report.
30
OPTIONS
Code Description
71÷80 90÷132
160
180
200
225
250
280
315
355÷500
100 Insulation class H
O
O
O
O
O
O
O
O
O
O
107 Tropicalization
O
O
S
S
S
S
S
S
S
S
108 Anticondensation heaters, with terminals in main terminal box
NA
NA
O
O
O
O
O
O
O
NA
109 Anticondensation heaters, with terminals in auxiliary terminal box
NA
O
O
O
O
O
O
O
O
O
111 PTC thermistors with terminals in main terminal box
O
S
S
S
S
S
S
S
S
O
114 PTC thermistors with terminals in auxiliary terminal box
NA
O
O
O
O
O
O
O
O
S
112 PT100 thermo detectors with terminals in main terminal box
NA
O
O
O
O
O
O
O
O
NA
115 PT100 thermo detectors with terminals in auxiliary terminal box
NA
O
O
O
O
O
O
O
O
O
122 Thermo detectors PT100 in bearings
NA
NA
O
O
O
O
O
O
O
O
125 Protection degree IP56
O
O
O
O
O
O
O
O
O
O
126 Protection degree IP65
O
O
O
O
O
O
O
O
O
NA
127 Second shaft end
O
O
O
O
O
O
O
O
O
O
128 Sealed bearings
O
O
O
O
O
O
O
O
O
O
129 Roller bearings on D-end
NA
NA
O
O
O
O
O
S*
S*
S
130 Oil seal
S
S
O
O
O
O
O
O
O
O
131 Drainage hole with tap
NA
NA
O
O
O
O
O
O
S
S
132 Vibration level A
S
S
S
S
S
S
S
S
S
S
133 Vibration level B
O
O
O
O
O
O
O
O
O
O
134 Metallic Fan
NA
NA
O
O
O
O
O
O
O
S
136 D-end special shaft extension
O
O
O
O
O
O
O
O
O
O
137 Low temperature duty up to -40°C
O
O
O
O
O
O
O
O
O
O
138 D-end and N-end grease nipples
NA
NA
O
O
O
O
O
S
S
S
139 Arrangement for SPM (Shock Pulse Measurement)
NA
NA
O
O
O
O
O
O
O
S
154 Arrangement for tachometer
NA
NA
O
O
O
O
O
O
O
O
159 Complete with tachometer
NA
NA
O
O
O
O
O
O
O
O
160 Arrangement for encoder standard type
NA
NA
O
O
O
O
O
O
O
O
161 Complete with encoder standard type
NA
NA
O
O
O
O
O
O
O
O
170 Anti rain canopy for IM V1
S
S
S
S
S
S
S
S
S
S
174 Locked D-end bearing
O
O
O
O
O
O
O
S*
S*
S
175 Insulated ND-end bearing
NA
NA
NA
NA
NA
NA
NA
O
O
O
177 Forced ventilation
NA
NA
O
O
O
O
O
O
O
O
178 Enhanced insulation system for Inverter application
NA
NA
NA
NA
NA
NA
NA
O
O
O
179 Special fan for reduced noise level
NA
NA
O
O
O
O
O
O
O
O
304 Special voltage and/or frequency
O
O
O
O
O
O
O
O
O
O
312 Special cable entry
O
O
O
O
O
O
O
O
O
O
313 Cable glands
O
O
O
O
O
O
O
O
O
O
919 Non standard RAL paint colour
O
O
O
O
O
O
O
O
O
O
930 Special painting process for aggressive environments
O
O
O
O
O
O
O
O
O
O
NA
S
O
*
Not available
Standard
Optional
Optional for 2 poles
31
NOTES
32
your partner in power technology
Italian Manufacturing Plant
Arzignano - Italy
Malaysian Manufacturing Plant
Shah Alam - Malaysia
•
•
•
•
•
HEADQUARTERS
OVERSEAS COMPANIES
Marelli Motori S.p.A.
ASIA PACIFIC
CENTRAL EUROPE
GREAT BRITAIN
Marelli Asia Pacific Sdn Bhd
Marelli Manufacturing Asia Sdn Bhd
Marelli Central Europe GmbH
Marelli UK Ltd
Lot PT 5038-5041, Jalan Teluk Datuk 28/40
Off Persiaran Sepang, Seksyen 28,
40400 Shah Alam, Selangor D.E.
Malaysia
(T) +60 355 171 999
(F) +60 355 171 883
(F) +60 355 171 881
[email protected]
Heilswannenweg 50
31008 Elze
Germany
(T) +49 5068 462 400
(F) +49 5068 462 409
[email protected]
Meadow Lane
Loughborough
Leicester, LE 11 1NB
UK
(T) +44 1509 615 518
(F) +44 1509 615 514
[email protected]
SOUTH AFRICA
SPAIN
USA
Marelli Electrical Machines South Africa (Pty) Ltd
Representative Office
Marelli USA, Inc
Unit 2, corner Director & Megawatt Road
Spartan Ext. 23
Kempton Park 1619 Gauteng
Republic of South Africa
(T) +27 11 392 1920
(F) +27 11 392 1668
[email protected]
Calle Constanza 5
08029 Barcelona
Spain
1620 Danville Road
Harrodsburg, KY 40330
USA
(T) +34 664 464 121
(F) +34 934 196 094
[email protected]
(T) +1 8597 342 588
(F) +1 8597 340 629
[email protected]
Via Sabbionara 1
36071 Arzignano (VI) - Italy
(T) +39 0444 479 711
(F) +39 0444 479 888
www.marellimotori.com
[email protected]
ITALIAN BRANCHES
Milan
Via Cesare Cantù 29
20092 Cinisello Balsamo (MI) - Italy
(T) +39 02 66 013 166
(F) +39 02 66 013 483
[email protected]
Florence
Via Panciatichi 37/2
50127 Firenze - Italy
(T) +39 055 431 838
(F) +39 055 433 351
[email protected]
ASI.CT.048.0 GB
MARELLI MOTORI reserves the right to change the design, technical specification and dimensions in order to update or improve its products, without prior notice
Grafiche Marcolin Schio 0314
•

Three Phase Squirrel Cage Non-sparking Motors Dust

Transcription

Similar documents

MarelliMotori - Tecnica Industriale S.r.l.

Three Phase Synchronous Generators

Catalogue - Sew Eurodrive

Elektrim Full - sahabat waskita teknik