Temperature Sensors and Special Cables

Transcription

Temperature
Sensors for
ABEE
MARINE
Member
Of
Page 2
Previous experience, Know-how of 40years
of Sensor manufacturing
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web: www.uteco.eu - Mail: [email protected]
COPYRIGHT 2012 UTECO ABEE. ALL RIGHTS RESERVED.
7
Series BMR– Thermocouple temperature sensors with connection head Type B with single
protection tube preferred for measuring of exhaust temperature in ships and stationary diesel
engines. Excellent vibration proof & shockproof. Application Field –Diesel engines- generatorsmarine sector
8
Series BMR- Thermocouple temperature sensor with connection head Type B and single
protection tube. Preferred for measuring for flue gas temperature in ships with junction box,
temperature transmitter and the extension cable.
8
Series BMR- Resistance thermometer with connection head Type B for measuring temperature
lubricant oil, fuel oil, water cooling, sea water circulation systems, fluid gas temperature
9
Series BMR- Exhaust gas temperature sensors with protection tube. For measuring and
regulation exhaust gas, temperature in stationary and marine. Suitable for measuring diesel
engines, turbines and compressors.
9
Series BMR- Resistance thermometer for lubricant oil, water cooling and seawater circulation
system. This is the internal element without protecting well (thermowell).
10
Series TWT- Temperature sensors with screwed bar stock thermowell for process technology
(chemical and petrochemical plant, pressure vessels, etc.), are preferably used for measuring
temperatures in liquids and gasses.
10
Series BM- Resistance thermometer head type B for measuring temperature lubricant oil, fuel
oil, water cooling and sea water circulation system.
11
Series BMRM- Resistance thermometer insert type with Terminal head form B suitable for
controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general
industry and marine applications.
11
Series BMRM- Resistance thermometer Insert type with spring pocket for measuring
temperature in solids, on closed pipe work for engine room.
12
Series BMRM- Exhaust gas temperature sensors with solid drilled protection tube. For measuring
and regulation exhaust gas, temperature in stationary and marine. Suitable for measuring diesel
12
Series BMRM-Temperature sensors with screwed bar stock thermowell for cargo oil pumping
system, water feed system and medium temperature flow system.
13
Series TWT- Thin line Exhaust gas Temperature sensors with solid drilled protection tube, for
measuring and regulation exhaust gas Temperature in stationary and marine suitable for
measuring diesel engines, turbines and compressors.
13
Series TWT-B Head - Exhaust gas Temperature sensors with solid drilled protection tube for
measuring and regulation exhaust gas Temperature in stationary and marine suitable for
measuring diesel engines, turbines and compressors.
14
Series MS- Exhaust gas temperature sensors insert type with miniature socket for measuring
and regulation exhaust gas, temperature in stationary and marine diesel engines, turbines and
compressors.
14
Series MS– Measuring insert for thermocouple and resistance thermometer with terminal head
form B. Temperature range -200 to +1150o C
15
15
Series CON- Exhaust Gas Temperature sensor for measurement of exhaust temperature in ships
and stationary diesel-engines, turbines, compressors and generators with thermocouples up to
900o C
16
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
www.uteco.eu - Mail: [email protected]
Page 3
Series JG- Resistance thermometer with mini terminal head form J suitable for measuring
temperatures of liquids and gases
Series CON– CON 37 Temperature sensors are heavy duty that can be used for controlling
cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and
Marine Application
16
Series CON– Resistance thermometer in vibration proof design allow temperature measuring
under pressure in motors, compressors, plant engineering and shipbuilding with plug connector to
EN 175301-803
17
Series BMF– Thermocouples with terminal head form B. Preferred choice for measuring
temperatures in liquids and gases. Application includes heating installations, ovens, furnaces and
plant engineering
17
Series BK– Incinerator thermocouple with Terminal Head Form KNE. Preferred choice for
measuring temperatures of primary and secondary combustion chambers. Application includes
Ovens and Furnaces.
18
Series BMF- Duct Resistance thermometer for HVAC
18
Series RM- Outdoor resistance thermometer for HVAC applications mainly used for measuring
temperatures outdoors
19
Series RM- Outdoor resistance thermometer for HVAC applications mainly used for measuring
temperatures outdoors
19
Series RM- Resistance thermometer suitable for measuring temperatures, in rooms, chill rooms,
cargo, refrigerated warehouse and outdoors.
20
Series RM– Twin Resistance thermometer 1xPt100 preferred for temperature measurement of
water ingress Alarm systems.
20
Series CBRY- Main bearing temperature sensors with cable, quick replacement. The sensors are
mounted in the middle of the door. The sensor measures the combined temperature of the
bearing shell and the lubrication oil that flows from the bearing
21
Series CBB- Thermocouple Temperature sensor with cable for monitoring bearing temperature 21
Series SUR- Fuel Pump Temperature sensor with Teflon extension cable, is used for measuring
temperature on closed pipe work and/or other round surfaces
22
Series SUR- Surface resistance thermometer with silicon extension cable is used for measuring
temperatures on closed pipe work and/ or other round surfaces.
22
Series SUR- Pipe contact resistance thermometer with Teflon extension cable is used for
temperature detection on pipes and arched surfaces.
23
Series SUR- Surface resistance thermometer with silicon extension cable is used for measuring
temperatures on closed pipe work and/ or other round surfaces.
23
Series CBW- Exhaust gas resistance thermometer (2xPt1000) for measurement of exhaust
temperature in ships- and stationary diesel-engines, turbines, compressors and generators with
resistance thermometer for up to 700°C
24
Series CBW- Exhaust gas temperature sensors for measurement of exhaust temperature in
ships- and stationary diesel-engines, turbines, compressors and generators with thermocouples
for up to 900°C
24
Series CBW- Thermocouple temperature sensor with cable & single protection tube. Preferred for
measuring of exhaust temperature in ships & stationary diesel engines. Excellent vibration proof
and shockproof.
25
Page 4
Series CBWR- Exhaust gas temperature sensors for measurement of exhaust temperature in
ships-engines, with thermocouples for up to 800° C
25
Series CBWR- Angle thermocouple temperature sensor with cable and single protection tube.
Preferred for measuring temperature, mainly on ships in connection with diesel engines in
exhaust system
26
Series CBR- Resistance thermometer with connection cable and single protection tube excellent
vibration proof and shockproof performances at high temperature, preferred for measuring
temperature exhaust system.
26
Series CBR- Thermocouple temperature sensor with cable and single protection tube. Preferred
for measuring of exhaust temperature in ships and stationary diesel engines. Excellent vibration
proof and shockproof. Application field –Diesel engines- Generators- Marine sector.
27
Series MIC- Bearing Resistance Thermometer for medium speed engines. This sensor can
withstand vibration and special environments fitted with spring loaded system.
27
Series MIC- Thermocouple temperature sensor with connector type ITT Cannon Preferred for
measuring temperature main engine exhaust gas
28
Series MIC– Flexible mineral insulated thermometer (type Mantel). Preferred for temperature
measurement of temperatures in pipe and tank systems e.g. in oil tankers, or part of a volume
measuring system.
28
Series MIC Τriple– Thermocouple Temperature sensors. Accurate, Rapid Response for
measurements Diesel engine with connector 6 pole
29
Series MIC Double– Exhaust gas Temperature sensors. Accurate, Rapid Response for
measurement Diesel Engine with connector 4 pole
29
Series INS- Resistance Thermometers for measurement meat and fruit during transportation
specially on board ships the operating range is from -40+70oC application –Marine sector –
containers.
30
Type “UMIC UTECO Mineral insulated”
31
Head mounted Analog 3- wire transmitter with digital adjustment d TRANS T03 BU (Type
707033) - for connection to Pt100 resistance thermometer for installation in: Terminal Head form
B to DIN 43729
32
Head mounted transmitter d TRANS T01 Junior (Type 707014) programmable 2-wire for
connection to resistance thermometer and thermocouples to install in: Terminal Head form B to
DIN 43729
33
Head mounted transmitter d TRANS T03 J (Type 707030) Analog 2-wire with digital
adjustment to install in Terminal Head form J
33
Head mounted transmitter d TRANS T01 (HART) (Type 707011) Programmable 2-wire for
connection to resistance thermometers and thermocouples and installation in: Terminal Head
form B to DIN 43729
34
Head mounted transmitter d TRANS T01 HART (Type 707016) Programmable 2-wire for
connection to resistance thermometers and thermocouple for installation in: Terminal Head form
B to DIN 43729
34
Head mounted transmitter d TRANS T01 (Type 707015) Programmable 2-wire for connection
to resistance thermometers and thermocouple for installation in: Terminal Head form B to DIN
43729
35
Head mounted transmitter APAQ-HCF T/C for thermocouple input, 4-20mA output.
35
DIN Rail transmitter dTrans T03T PT100, 4-20mA output
36
DIN Rail transmitter APAQ-LR PT100, 4-20mA output
36
DIN Rail 2-wire transmitter APAQ-LC
37
T/C for thermocouples, 4-20mA output
DIN Rail universal-programmable transmitter d TRANS T02 PCP
37
DIN Rail programmable transmitter dTRANS T04 – 4 wire Transmitter, settable via DIP
switch/PC setup program (707040) for connection to Pt100/Pt1000 resistance thermometer or
potentiometer; rail-mounted to EN 60715
38
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 5
37
Series TWT- Screw-in pocket for systems where drain- or pressure- less installations/
exchanging of thermocouples or resistance thermometers are required.
39
Series TWT- Screw-in pocket for systems where drain or pressure less installations / exchanging
of thermocouples or resistance thermometers.
39
Isolated Barriers for Temperatures Probes
41
Miniature Connector with thermocouple material contacts
42
Standard Connector with thermocouple material contacts
42
Standard panel with Thermocouple material contacts
42
Series MAGN: Level Switches-Magnetic Float with reed relays
43
Series MAGN: Level Switches-Magnetic float –UTECO Magnetic float level, suitable for level
indication of normal and explosive liquids and can be used for level control tasks
43
Series Conductive - Level sensors for conductive limit value detection
44
44
ACCESSORIES – Connection Head
45
Connection head type XDA ATEX 94/9/EC,
45
EN 50018, EN60079-1
45
Connection head type KNE
45
Connection head to DIN EN 50446 FORM B
45
Connection head type XD-SD
46
Connection head form BUZH
46
Connection head to DIN EN 50446 Form A
46
Connection head TYP BBK to DIN EN 50446 Form B
47
Connection head form J (miniature head)
47
ACCESSORIES-Cable Gland
48
Temperature measuring transmitter for MSD4 Power connector 4-20 mA or 0-10V
49
Standard Cylindrical Connectors
50
50
50
COMPENSATING & EXTENSION CABLES
51
HIGH TEMPERATURE CABLES
52
MARINE APPROVED CABLES
53
MARINE APPROVED CABLES
54
DATA CONTROL & HIGH VOLTAGE CABLES
56
INSTRUMENTATION & BUS CABLES
57
Page 6
INTERNATIONAL COLOR CODE FOR COMPENSATING & EXTENSION CABLES
58
REPRESENTED FIRMS
60
ORDERING FORM
63
A few words about this catalogue
Dear Customers,
You will find below a standardized list of ―Temperature sensors & Special cables from us, which are
always in stock at our warehouse, capable of solving the immediate need of the most demanding
applications.
The catalogue includes code, type, basic technical description and a photo for visual recognition of
our product.
Indicative list:
Temperature sensors with different measuring range, length, construction material, process
connection etc. are also available.
Cables with different numbers of cores or pairs, different sections (mm2), insulation or color codes
(standard), etc. are also available.
If your requests are not covered by this publication, please contact us
By phone at
Through fax at
Or by mail at
+30 211 1206 900
+30 211 1206 999
[email protected]
Copyright 2012 UTECO ABEE. All rights reserved.
Page 7
NOTICE: All information contained herein is the property of UTECO ABEE. No part of this publication (whether
in hardcopy or electronic form) may be reproduced or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written consent of the Adobe Systems
Incorporated.
UTECO ABEE and the UTECO ABEE logo are either registered trademarks or trademarks of UTECO ABEE in
Greece and/or other countries.
All other trademarks are the property of their respective owners.
This publication and the information herein is furnished AS IS, is subject to change without notice, and should
not be construed as a commitment by UTECO ABEE. UTECO ABEE assumes no responsibility or liability for any
errors or inaccuracies, makes no warranty of any kind (express, implied, or statutory) with respect to this
publication, and expressly disclaims any and all warranties of merchantability, fitness for particular purposes,
and on infringement of third party rights. Image material used in this publication might differ from the actual
product depending on the current production line of each manufacture.
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Series BMR– Thermocouple temperature sensors with connection head Type B with single
protection tube preferred for measuring of exhaust temperature in ships and stationary
diesel engines. Excellent vibration proof & shockproof. Application Field –Diesel enginesgenerators- marine sector
For Inquiries of
this product
referred to
M2-1
Specifications
The measuring insert with thermocouple type K to DIN IEC 60584 Class 2. Solid construction with
high resistance against vibration according to IEC 68-2-6 ungrounded from the bottom
Outside diameter:
Sheath material:
Process connection:
Immersion length:
Temperature range:
Terminal head:
Ø12x1.5mm
AISI 316 Ti
¾ BSP
80mm, 100mm, 150mm, 200mm, 250mm and 300mm
from 0° C to +750° C
Type BUZ Cast Aluminum IP65
Other technical characteristics (length, diameter, process connection, etc.) available
upon request.
Series BMR- Thermocouple temperature sensor with connection head Type B and single
protection tube. Preferred for measuring for flue gas temperature in ships with junction
box, temperature transmitter and the extension cable.
For Inquiries of
this product
referred to
M2-2
Specifications
The thermocouple insert is fitted with thermocouple Type K according to class 2 to DIN EN 60584.
Solid construction with high resistance against vibration according to IEC 68-2-6 the thermocouple
is electrical insulated from the protective tube connected to the process by adjustable compression
fitting.
Page 8
Probe diameter:
Immersion length:
Sheath material:
Process connection:
Junction Box:
Transmitter:
Cable Length:
Temperature range:
Terminal head:
8x1,5mm
300mm
310 S
½ BSP
IP65, die cast aluminum
4-20mA APAQ-HC
2m with insulation silicon-glass fiber & steel braid 200oC
from 0°C to 900°C
Type BUZ die cast Aluminum IP65
Other technical characteristics (length, diameter, process connection, etc.), available
upon request.
Series BMR- Resistance thermometer with connection head Type B for measuring
temperature lubricant oil, fuel oil, water cooling, sea water circulation systems, fluid gas
temperature
For Inquiries of
this product
referred to
M2-3
Specifications
Resistance type and tolerances:
Outside diameter:
Immersion length:
Sheath Material:
Process connection:
Welded Pocket:
Temperature range:
Terminal head:
Resistance thermometer Pt100, Class B, 3 wire system to
DIN EN 60751
8x1.5mm
120mm, 270mm or 320mm
AISI 316Ti
M24x1.5 Female
-See Series TWTfrom 0°C to +650°C
Type BUZ die Cast Aluminum IP65
Other technical characteristics (length, Diameter, process connection etc.) available upon
request.
Series BMR- Exhaust gas temperature sensors with protection tube. For measuring and
regulation exhaust gas, temperature in stationary and marine. Suitable for measuring
diesel engines, turbines and compressors.
For Inquiries of
this product
referred to
M2-4
Specifications
Outside diameter:
Sheath material:
Process connection:
Immersion Length:
Temperature range:
Terminal head:
Resistance thermometer PT100, Class B, 3 wire system as per DIN
EN 60751
12mm or 15mm
AISI 316 Ti
G¾
80mm, 100mm, 110mm, 150mm, 200mm, 250mm, 300mm
from -50° C to +650° C
Cast Aluminum IP65
Other technical characteristics (length, diameter, process connection etc.), available
upon request.
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 9
Series BMR- Resistance thermometer for lubricant oil, water cooling and seawater
circulation system. This is the internal element without protecting well (thermowell).
For Inquiries of
this product
referred to
M2-5
Specifications
The measuring insert is fitted with resistance thermometer 1xPt100 to DIN EN 60751 Class B with 3
wire system.
The protecting well diameter 12,7mm for length 80, 100, 120 and 150mm.
The protecting well diameter 13,8mm for length 200mm, 250mm and 300mm.
Outside diameter:
Sheath material:
Process connection:
Immersion Length:
Temperature range:
Terminal head:
7mm
AISI 316 Ti
G¾
80mm, 100mm, 120mm, 150mm, 200mm, 250mm, 300mm
+5mm(for all length)
0° C to +200° C
Form BUZ IP65 cast aluminum.
upon request.
Series TWT- Temperature sensors with screwed bar stock thermowell for process
technology (chemical and petrochemical plant, pressure vessels, etc.), are preferably
used for measuring temperatures in liquids and gasses.
For Inquiries of
this product
referred to
M2-6
Specifications
The measuring insert is fitted with resistance thermometer PT100 to DIN EN 60751, CLASS A with
2,3 or 4 wire system. With replaceable measuring insert D6mm (mineral insulated cable).
Page 10
Stem diameter under thread:
Tip diameter:
Tip thickness:
Immersion length:
Extension length:
Connection head:
Ambient temperature:
Process connection:
Sheath Material:
Bore:
18mm
14mm
4mm
100mm
100mm
weather proof , cast-aluminum IP65, Form EExd
from -20° C to +130° C
R ½ NPT
AISI 316L
7mm
Available with 2-wire transmitter (4-20mA/HART/In Ex version)
upon request.
Series BM- Resistance thermometer head type B for measuring temperature lubricant oil,
fuel oil, water cooling and sea water circulation system.
For Inquiries of
this product
referred to
M2-7
Specifications
Resistance type and
tolerances:
Outside diameter :
Probe Length:
Sheath material:
Temperature range:
Terminal head:
Resistance thermometer 1x Pt100 Class A, single or double to
DIN IEC 60751 2,3,4 or 6 wire system version with Ni100,
Pt1000, T802Ω can also be supplied.
9.5mm
80mm,125mm,150mm,200mm or 250mm
AISI 316L
From -50 to +200o C
Type BUZ - IP65 die cast aluminum
Other technical characteristics (length, diameter, etc.) available upon request.
Series BMRM- Resistance thermometer insert type with Terminal head form B suitable for
controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within
general industry and marine applications.
For Inquiries of
this product
referred to
M2-8
Specifications
Outside diameter :
Sheath material
:
Resistance thermometer PT100, Class B, DIN EN 60751
Single or double, available with 2,3 or 4 wire circuit.
10mm x 2mm
AISI 316 Ti
Process connection:
G ½ A or G¾ A
Immersion length:
50mm,80mm,100mm,150mm,200mm
Extension length:
50mm
Temperature range:
Other technical characteristics (length, diameter, process connection, sensor tolerance
etc.) available upon request.
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 11
-50+260o C
Vibration stability:
shock 100g in 6ms
vibration 4g sine function 2-100Hz
Terminal head :
Cast Aluminum Type B - IP65
Available with temperature transmitter 4-20 mA supply voltage 8-35 V DC
Series BMRM- Resistance thermometer Insert type with spring pocket for measuring
temperature in solids, on closed pipe work for engine room.
For Inquiries of
this product
referred to
M2-9
Specifications
Resistance thermometer 2ΧPT100, Class Α, DIN EN 60751 with 2
wire circuit.
Outside diameter :
Sheath material
:
11mm
Bronze
Immersion Length:
33mm
Process connection:
Terminal Head:
Temperature range:
½ BSP
Cast Aluminum form BUZ IP65
-50+260o C
upon request.
Series BMRM- Exhaust gas temperature sensors with solid drilled protection tube. For
measuring and regulation exhaust gas, temperature in stationary and marine. Suitable
for measuring diesel engines, turbines and compressors.
For Inquiries of
this product
referred to
M2-10
Specifications
PT100 Thin film Technology specially developed for heavy duty application.
Screwed bar stock thermowells with tapered stem.
Resistance type and tolerance:
Page 12
Tip diameter:
Tip thickness:
Extension length:
Immersion length:
Connection head:
Temperature range:
Sheath Material:
Bore:
Resistance thermometer PT100, CLASS B, DIN/IEC 60751, 2 wire or
3 wire system.
24mm
14mm
4mm
50mm or 100mm
80mm, 100mm, 150mm, 200mm, 250mm
weatherproof , heavy duty head with screw on cover IP65
from 0 to +650° C
AISI 316
9mm
Other technical characteristics (length, diameter, process connection etc.), available
upon request.
Series BMRM-Temperature sensors with screwed bar stock thermowell for cargo oil
pumping system, water feed system and medium temperature flow system.
For Inquiries of
this product
referred to
M2-11
Specifications
The measuring insert is fitted with resistance thermometer PT100 to DIN EN 60751, CLASS A
With 3 or 4 wire system with replaceable measuring insert D6mm
Stem diameter under
thread:
Immersion length:
Connection head:
Process connection:
Sheath Material:
10mm
16mm
Weatherproof with screw on cover, cast-aluminum IP65,
explosion proof EExd IICT6
M22X1,5mm
AISI 316L
upon request.
Series TWT- Thin line Exhaust gas Temperature sensors with solid drilled protection tube,
for measuring and regulation exhaust gas Temperature in stationary and marine suitable
For Inquiries of
this product
referred to
M2-12
Tip diameter:
Bore:
Tip thickness :
Immersion length:
Extension length :
Process connection :
Sheath Material :
Connection head:
Temperature range :
resistance thermometer PT100 CLASS B 3 wire system to DIN/EN
60751
24mm
14mm
9mm
4mm
80, 100,120,150,170,200,250 or 300mm
50mm
G 3/4A Hex 32
AISI 316L
weather proof, IP65 Thinline
From 0 to 650o C
Other technical characteristics (length, diameter, Process connection, etc.) available
upon request
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 13
Specifications
Series TWT-B Head - Exhaust gas Temperature sensors with solid drilled protection tube
for measuring and regulation exhaust gas Temperature in stationary and marine suitable
For Inquiries of
this product
referred to
M2-13
Specifications
Tip diameter:
Bore:
Tip thickness :
Immersion length:
Extension length :
Process connection :
Sheath Material :
Connection head:
Temperature range :
Resistance thermometer PT100 CLASS B 3 wire system to DIN EN
60751
24mm
14mm
9mm
4mm
80, 100,120,150,170,200,250 or 300mm
50mm or 100mm
G 3/4A Hex 32
AISI 316L
Cast Aluminum, Weather proof, IP65
0 - 650o C
Other technical characteristics (length, diameter, Process connection, etc.) available
upon request
Series MS- Exhaust gas temperature sensors insert type with miniature socket for
measuring and regulation exhaust gas, temperature in stationary and marine diesel
For Inquiries of
this product
referred to
M2-14
Specifications
Probe outer diameter:
Immersion length:
Terminal blocks:
Temperature range:
Resistance thermometer PT100, CLASS B, to DIN/ EN 60751, 2 wire
or 3 wire system.
8.0mm
150mm, 170mm, 190mm, 250mm
form J ceramic Ø25.1mm (miniature socket)
from 0 to +650° C
Page 14
Other technical characteristics (length, diameter), available upon request.
Series MS– Measuring insert for thermocouple and resistance thermometer with terminal
head form B. Temperature range -200 to +1150o C
For Inquiries of
this product
referred to
M2-15
Specifications
The measuring inserts are normally fitted with a temperature sensor PT100 to DIN EN 60751,
CLASS B with 2, 3 or 4 wire system. The measuring insert with thermocouple Type K is according to
Class 2 of DIN EN 60584.
Tube diameter:
Immersion length:
Terminal block:
Temperature range:
3mm, 4,5mm, 6mm , 8mm
170mm, 220mm, 315mm, 385mm, 405mm
form B Diameter 42mm
from -200 to +1150°C
Available with transmitter output 4-20 mA or 0-10 V
Version with PT500 or PT1000 can also be supplied. Also as single or twin insert.
Other technical characteristics (length, diameter, etc.), available upon request.
Series JG- Resistance thermometer with mini terminal head form J suitable for measuring
temperatures of liquids and gases
For Inquiries of
this product
referred to
M2-16
Specifications
Outside diameter:
Sheath material:
Process connection:
Immersion length:
Temperature range:
Terminal head:
Resistance thermometer PT100, Class A, DIN EN 60751, 2, 3, or 4
wire system
7mm
AISI 316 Ti
G 1/2
50mm
from -50° C to +260° C
mini terminal head form J Pg9, IP54
Other technical characteristics (length, diameter, connector, etc.), available upon
request.
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 15
Series CON- Exhaust Gas Temperature sensor for measurement of exhaust temperature in
ships and stationary diesel-engines, turbines, compressors and generators with
thermocouples up to 900o C
For Inquiries of
this product
referred to
M2-17
Specifications
The measuring insert is fitted with thermocouple type K, tolerance EN 60584-2, CLASS 1, 1xNiCr Ni
Tube diameter:
Immersion length:
Gasket
Temperature range:
Connector:
4.5mm
133mm
Ø 14x10x7/3mm
0-900o C
Jaeger 6 pole male
Other technical characteristics (Length, diameter, etc), are also available upon request
Series CON– CON 37 Temperature sensors are heavy duty that can be used for controlling
cooling water, lubrication oil, hydraulic oil and refrigeration plants within general
industry and Marine Application
For Inquiries of
this product
referred to
M2-18
Specifications
The measuring insert is fitted with resistance thermometer PT100 to DIN EN 60751, CLASS B with 2
or 3 wire systems.
Gold plated male and female connector CON 37 with interchangeable measuring insert.
Page 16
Diameter:
Immersion length:
Process connection:
Temperature range:
Coupling:
8mm
50mm,150mm, 200mm
G1/2, G3/4A ,G1/4 or ½-14 NPT
from -50 to +260° C
DIN 43650/PG 13.5mm
upon request.
Series CON– Resistance thermometer in vibration proof design allow temperature
measuring under pressure in motors, compressors, plant engineering and shipbuilding
with plug connector to EN 175301-803
With protection class IP 65 when connected vibration proof design: German
Lloyd, application category “D” Characteristic line 2
For Inquiries of
this product
referred to
M2-19
Specifications
The measuring insert is fitted with resistance thermometer 1xPt100 2, 3 or 4 wire system class A to
DIN IEC60751 with connection socket pg9 to EN 175301
Outer Diameter:
Immersion length:
Process connection:
Temperature range:
8mm
50mm,100mm,150mm, 200mm
Thread G1/2, or G1/4, G3/8, M18x1.5 , M20x1.5m thread
from -50 to +260° C
upon request
Series BMF– Thermocouples with terminal head form B. Preferred choice for measuring
temperatures in liquids and gases. Application includes heating installations, ovens,
furnaces and plant engineering
For Inquiries of
this product
referred to
M2-20
Specifications
The measuring insert is fitted with thermocouple according to Class 2 to DIN EN 60584
Transmitter:
15x2mm
No. 1.4841
stop flange 15mm dia DIN 43734
250mm, 500mm, 710mm, 1000mm, 1400mm
from 0 to +1150° C
form B DIN 43729 Aluminum die casting IP54
Programmable Transmitter, Output 4-20ma/20-4 ma can also be
supplied
Other technical characteristics (length, diameter, process connection etc.) available upon
request.
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 17
Probe diameter:
Sheath material:
Process connection:
Probe length:
Temp. range:
Terminal head:
Series BK– Incinerator thermocouple with Terminal Head Form KNE. Preferred choice for
measuring temperatures of primary and secondary combustion chambers. Application
includes Ovens and Furnaces.
For Inquiries of
this product
referred to
M2-21
Specifications
The measuring insert is fitted with thermocouple according to Class 2 to DIN EN 60584
Ceramic probe outer diameter:
Metallic support tube:
Process connection:
Ceramic Material:
Probe total length:
Temp. range:
Terminal head:
10x2mm, 15x2mm
15mm ( for ceramic tube 10mm)
22mm ( for ceramic tube 15mm )
Screwed pipe point ¾ BSP
C799 (KER 710)
250mm, 370mm,500mm,710mm
from 0 to +1600° C
weather proof with screw on cover and chain
upon request.
Series BMF- Duct Resistance thermometer for HVAC
For Inquiries of
this product
referred to
M2-22
Specifications
The measuring insert is normally fitted with a Pt100 or Pt1000 Temperature Sensor to DIN
IEC60751 Class A in 2-wire, 3-wire and 4-wire circuit.
Terminal Box:
Protection Tube:
Immersion length:
Transmitter:
Plastic PVC housing IP65
Stainless steel 1,4571 diameter 8mm
200mm
analog transmitter, output 4 – 20 mA or 0-10V
Page 18
Other versions available with Pt500, Ni 1000, Ni 120, NTC 10 KΩ, KTx 11-6 can also be supplied.
Other technical characteristics (length, diameter, etc.), available upon request.
Series RM- Outdoor resistance thermometer for HVAC applications mainly used for
measuring temperatures outdoors
For Inquiries of
this product
referred to
M2-23
Specifications
The measuring insert is normally fitted with a Pt100 or Pt1000 Temperature Sensor to IEC 951
Class A in 2-wire, 3-wire and 4-wire circuit.
Terminal Box:
Transmitter:
Versions:
Resistance thermometer Pt100 or Pt1000 class A accuracy ±0,150°C
to 0°C, IEC751 3-wire system
Plastic PC housing IP65
analog transmitter, output 4 – 20 mA or 0-10V
Pt500, Ni1000, Ni120, or NTC10KΩ can also be supplied
Series RM- Outdoor resistance thermometer for HVAC applications mainly used for
measuring temperatures outdoors
For Inquiries of
this product
referred to
M2-24
Specifications
Resistance type an tolerance thermometer P+100 or P+1000 class A accuracy ±0,15°C to DIN IEC
60751, 2 or 3 system wire
Terminal box:
Cable entry:
Protection:
Terminal Clamp:
Page 19
Cable length:
Cable insulation:
Material PA6, Color: pure white similar to RAC 9010
PE 14
IP65
Screwing terminal max 1,5mm2 Version Pt500, Ni 1000, NTC 10KΩ,
KTY 21-5 can also be supplied
3m
PVC-PVC (3 x 0,35mm²)
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Series RM- Resistance thermometer suitable for measuring temperatures, in rooms, chill
rooms, cargo, refrigerated warehouse and outdoors.
For Inquiries of
this product
referred to
M2-25
Specifications
The measuring insert is normally fitted with a Pt100 Temp. Sensor to DIN EN 60751 Class 1/3 or
1/6DIN in 3-wire, 4-wire and 6-wire circuit, single or duplex resistance thermometer.
Connection Box:
Protection Tube:
Measuring Insert:
Transmitter:
Response time:
Material Aluminum, Protection IP65
round 14mm stainless steel perforated with open end
Pt100 1/3B or 1/6B DIN
analog transmitter, output signal 4 – 20 mA or 0-10V
Mean Values-measured at velocities in
Water at 0.4m/s t0.5=11sec
Air at 3.0m/s t0.5=35sec
Series RM– Twin Resistance thermometer 1xPt100 preferred for temperature
measurement of water ingress Alarm systems.
For Inquiries of
this product
referred to
M2-26
Specifications
Resistance thermometer 1xPt100 Class A, 2 wire systems to DIN EN 60751.
2mm or 7mm
50mm
St. St. 1.4571
1/8 NPT
70mm with insulation Teflon 2x0.22mm2
-50 +150o C
Within 5 sec
IP68
Page 20
Probe diameter:
Probe Length:
Protection tube:
Process Connection:
Bare end:
Temperature range:
Response time:
Ingress Protection:
Series CBRY- Main bearing temperature sensors with cable, quick replacement. The
sensors are mounted in the middle of the door. The sensor measures the combined
temperature of the bearing shell and the lubrication oil that flows from the bearing
For Inquiries of
this product
referred to
M2-27
Specifications
Resistance thermometer PT100 to DIN IEC 60751, Class A, 3 wire system.
Dimension of Case :
Cable Insultation:
Temperature range :
63x42x31mm or 121x33x150mm
PVC-PVC (3x0,34mm2)
0 +150° C
Other technical characteristics (Dimensions, cable length, insulation cable etc.) available
upon request
Series CBB- Thermocouple Temperature sensor with cable for monitoring bearing
temperature
For Inquiries of
this product
referred to
M2-28
Specifications
The measuring insert is fitted with thermocouple (mineral insulated cable) to type K single to DIN
IEC 60584 CLASS 1.
3mm
34 or 80mm
Bayonet lock Ø10mm
316L
Teflon/braiding/Teflon 2X0,5mm
0-600o C
upon request
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 21
Tube Diameter:
Immersion Length under the o-ring :
Process connection:
Material probe:
Compensating cable:
Temperature range:
Series SUR- Fuel Pump Temperature sensor with Teflon extension cable, is used for
measuring temperature on closed pipe work and/or other round surfaces
For Inquiries of
this product
referred to
M2-29
Specifications
Resistance thermometer PT100 to DIN IEC 60751, Class B available with 2, 3 or 4 wire circuit
Probe length:
Protection:
Cable insulation :
55mm
IP67
Teflon-braiding- Teflon (3x0,5 mm2)
Other technical characteristics (Other Version -PT1000, 2XPT100, Ni1000, NTC 10KΩ,
cable length, insulation cable, etc.) available upon request
Series SUR- Surface resistance thermometer with silicon extension cable is used for
measuring temperatures on closed pipe work and/ or other round surfaces.
For Inquiries of
this product
referred to
M2-30
Specifications
Resistance thermometer PT100 to DIN IEC 60751, CLASS A or B Available with 2, 3 or 4 wire circuit
Page 22
Probe length:
Protection:
Cable insulation :
50mm
IP67
Silicon- Teflon (3 x 0,5mm²)
Other technical characteristics (Other versions - Pt1000, Pt500, Ni1000, cable length,
insulation cable temperature etc.) available upon request
Series SUR- Pipe contact resistance thermometer with Teflon extension cable is used for
temperature detection on pipes and arched surfaces.
For Inquiries of
this product
referred to
M2-31
Specifications
Resistance thermometer Pt100 to ICE 751 class B to DIN EN 60751 available with 2, 3 or 4 wire
system.
Protection fitting:
Cable insulation :
Stainless steel
Teflon – Braided – Teflon (4x0,22mm2)
Other versions available with Pt1000, Pt500, Ni1000, Ni120, NTC 10KΩ etc. (available with single or
twin resistance thermometer)
Series SUR- Surface resistance thermometer with silicon extension cable is used
for measuring temperatures on closed pipe work and/ or other round surfaces.
For Inquiries of
this product
referred to
M2-32
Specifications
Resistance thermometer PT100 to DIN IEC 60751, CLASS A or B Available with 2, 3 or 4 wire circuit
Probe dimension
Immersion length:
Protection:
Material:
Cable insulation :
Cores:
Screen:
Sheath:
15x50x8mm
50mm
IP 55
AISI 304
ETFE (3x0,75mm2)
Tin plated copper (TRC) Insulation ETFE
Tin plated copper drain wire beneath braid of tin plated copper
wire
(85% min coverage)
ETFE
Suitable for oil and chemical resistant and flame retardant to IEC 6033-2-3
The cable has been approved by a number of international recognized bodies including
Other technical characteristics (Other versions - Pt1000, Pt500, Ni1000, cable length,
insulation cable temperature etc.) available upon request
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 23
ABS, DNV, GL and NKK
Series CBW- Exhaust gas resistance thermometer (2xPt1000) for measurement of
exhaust temperature in ships- and stationary diesel-engines, turbines, compressors and
generators with resistance thermometer for up to 700°C
For Inquiries of
this product
referred to
M2-33
Specifications
The measuring insert is fitted with resistance Pt1000 to DIN EN 60751 CLASS B with 2, 3 or 4 wires
system.
Probe Diameter:
Probe Length:
Gasket:
Sheath Material
Extension cable:
Temperature
4,5mm
130mm
Ø16x6mm
AISI 316Ti
Teflon-Braiding-Teflon (4x0.22mm2)
Up to 700o C
Other technical characteristics (length, diameter, cable Length etc.) available upon
request
Series CBW- Exhaust gas temperature sensors for measurement of exhaust temperature
in ships- and stationary diesel-engines, turbines, compressors and generators with
thermocouples for up to 900°C
For Inquiries of
this product
referred to
M2-34
Specifications
The measuring insert is fitted with thermocouple type K, Tolerance DIN IEC 60584-2 CLASS 2
(1xNICR NI)
Page 24
Tube Diameter:
Probe Length:
Gasket:
Extension cable:
Temperature:
6.0mm or 4,8mm
50mm,80mm, 127mm,140mm, or 170mm
Ø16x9.8x7x8mm
KAPTON-KAPTON-Braiding 2x0,5mm
Ambient temp. cable 300° C
0-900 °C
Other technical characteristics (length, diameter, cable Length etc.) available upon
request
Series CBW- Thermocouple temperature sensor with cable & single protection tube.
Preferred for measuring of exhaust temperature in ships & stationary diesel engines.
Excellent vibration proof and shockproof.
Application field: Diesel engine- Generators- Marine sector
For Inquiries of
this product
referred to
M2-35
Specifications
The measuring insert in fitted with thermocouple Type K to DIN IEC 60584 Class 2 solid
construction with high resistance vibration according to IEC 68-2-6 unground from the bottom,
straight or angle form.
Probe Diameter:
Immersion Length:
Protection:
Temperature:
Cable insulation:
9.5mm
186mm, 236 mm, 286 mm, 316 mm
IP65
Up to +800°C
Silicone-Fiberglass-Braiding
Other technical characteristics (length, diameter, process connection, cable length etc.)
available upon request
Series CBWR- Exhaust gas temperature sensors for measurement of exhaust temperature
in ships-engines, with thermocouples for up to 800° C
For Inquiries of
this product
referred to
M2-36
The measuring insert is fitted with thermocouple type K, Tolerance to DIN EN 60584 CLASS 1. Hot junction
isolated from the ground.
Tube Diameter:
6.0mm
Horizontal length :
60mm
Vertical length:
100mm
Ring :
SSØ9.5mm
Length under ring :
80mm
Process Connection:
M11x1,25mm
Material :
ST.ST
Extension cable:
KAPTON+KAPTON+ Steel coating
connector output DTO42P
Probe Length:
186mm, 236 mm, 286 mm, 316 mm
Protection:
IP67
Temperature:
from 0 to -800°C
Compensating cable:
Silicone-Fiberglass-Braiding
Other technical characteristics (length, diameter, connector etc.) available upon request
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 25
Specifications
Series CBWR- Angle thermocouple temperature sensor with cable and single protection
tube. Preferred for measuring temperature, mainly on ships in connection with diesel
engines in exhaust system
For Inquiries of
this product
referred to
M2-37
Specifications
The measuring insert is fitted with Thermocouple (mineral insulated cable) to type K (double) to
DIN IEC 60584 Class 2.
Tube diameter :
Probe Length :
Process Connection:
Process connection:
Material :
Compensating cable:
Termination:
Temperature range:
12/10mm
110mm
½ BSP
M24x1.5Fem
AISI 316L made from solid bar stock
Fiberglass-Fiberglass-Braiding with covered eith stainless steel flexible
armour
6 pole female connector (jaeger)
0-800oC
Other technical characteristics (length, diameter, process connectors, etc.) available
upon request
Series CBR- Resistance thermometer with connection cable and single protection tube
excellent vibration proof and shockproof performances at high temperature, preferred for
measuring temperature exhaust system.
For Inquiries of
this product
referred to
M2-38
Specifications
The measuring insert is fitted with resistance thermometer PT100 to DIN IEC 60751, Class B to IEC
751, with 3 wire system.
Page 26
Tube diameter :
Probe Length :
Process Connection:
Protection tube:
Protection :
Cable insulation:
Temperature range:
12mm
105mm
½ BSP
stainless steel 1.4571
IP67
Teflon-braiding- Teflon (4x0.5mm2)
Up to 700o C
request
Series CBR- Thermocouple temperature sensor with cable and single protection tube.
Preferred for measuring of exhaust temperature in ships and stationary diesel engines.
Excellent vibration proof and shockproof. Application field –Diesel engines- GeneratorsMarine sector.
For Inquiries of
this product
referred to
M2-39
Specifications
The measuring insert is fitted with
thermocouple to Type K to DIN IEC
60584 class 2.
Solid construction with high resistance against vibration according to IEC 68-2-6 ungrounded from
the bottom.
Probe diameter:
Immersion Length:
Process Connection:
Sheath Material:
Compensating cable:
Temperature range:
Cones 12.5x 8.5mm
100mm or 150mm
½ BSP, ¾ BSP or M 18x 1.5 (Compressing Fitting)
AISI 316Ti
Silicon-fiberglass-Braiding
2x1.5mm2 or4x1.5mm2
Up to 800o C
Other technical characteristics (length, diameter, process connection, cable length etc.)
available upon request
Series MIC- Bearing Resistance Thermometer for medium speed engines. This sensor can
withstand vibration and special environments fitted with spring loaded system.
For Inquiries of
this product
referred to
M2-40
Tip diameter :
Tip length:
Sheath Material:
Extension length:
Mechanical connection:
Probe length:
Connector
Insulation:
Response time :
Process Connection:
Springloaded:
6mm
16mm (end tip)
AISI 316L
1150 or 580mm
M18x1,5mm
20 or 25mm (end tip)
Jaeger 3 pole male
>100MΩ 500 V DC
at 63% 1,6 sec
at 90% 3.6 sec
M10x1
42mm
request
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 27
Specifications
The measuring insert is fitted with resistance thermometer PT100, to DIN/IEC 60751, CLASS A, 3
Wire system
Series MIC- Thermocouple temperature sensor with connector type ITT Cannon Preferred
for measuring temperature main engine exhaust gas
For Inquiries of
this product
referred to
M2-41
Specifications
The Measuring insert is fitted thermocouple type K to DIN IEC 60584
Tube Diameter:
Process Connection :
Probe Length:
Material Inconel:
Extension probe:
Connector:
Temperature range:
5.5 mm
M12x1.0 mm
133 mm
600
Flexible mineral insulated thermocouple
ITT Cannon , 5 pole
(type Mantel) Length: 1500mm
-200 +1150oC
Series MIC– Flexible mineral insulated thermometer (type Mantel). Preferred for
temperature measurement of temperatures in pipe and tank systems e.g. in oil tankers,
or part of a volume measuring system.
For Inquiries of
this product
referred to
M2-42
Specifications
Resistance thermometer Pt100 Class A ± 0.15 at 0° C according to DIN IEC 60751, 3wire or 4wire
system
Probe Diameter:
Process Connection :
Response Time:
Page 28
Sheath Material:
Connecting Cable:
3mm, 4.5mm
1/8 BSP (male) adjustable
(main values) measured at velocities in water 0.4m/s
t 0.5=11sec
AISI 316
Teflon: ambient temp. -50°C to +260°C
Series MIC Τriple– Thermocouple Temperature sensors. Accurate, Rapid Response for
measurements Diesel engine with connector 6 pole
For Inquiries of this
product referred to
M2-43
Specifications
The measuring insert is fitted with thermocouple Type K according to DIN IEC 60584 Class 1
Probe Diameter:
Immersion length:
Sheath Material:
Process Connection:
Termination:
Temperature:
Compensating Cable:
2mm
145mm
Inconell 600
M8x1
6 pole Female Connector (Jaeger)
0-800°C
Teflon-braiding-Teflon with flexible armour
Other technical characteristics (Cable length, diameter, length etc.) available upon
request
Series MIC Double– Exhaust gas Temperature sensors. Accurate, Rapid Response for
measurement Diesel Engine with connector 4 pole
For Inquiries of this
product referred to
M2-44
Specifications
Probe Diameter:
Immersion length:
Sheath Material:
Process Connection:
Termination:
Temperature:
Compensating Cable:
2mm
195mm
Inconell 600
Bayonet Lock
4 pole Female Connector (Jaeger)
0-800°C
Teflon-braiding-Teflon with flexible armour
Other technical characteristics (Cable length, diameter, length etc.) available upon
request
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 29
The measuring insert is fitted with thermocouple Type K according to DIN IEC 60584 Class 1
Series INS- Resistance Thermometers for measurement meat and fruit during
transportation specially on board ships the operating range is from -40+70oC application
–Marine sector – containers.
For Inquiries of
this product
referred to
M2-45
Specifications
The measuring insert is normally fitted with Pt100 resistance thermometer according to DIN IEC
60751 3 wire or 4 wire systems.
Tolerance class:
Probe diameter:
Immersion length:
Cable insulation:
Protection tube:
Temp. range:
Junction Box:
A±(0.15oC +0.002 x t actual) oC
1/3 class B ±(0.10oC +0.005 x t actual) oC
1/6 Class B A±(0.05oC +0.005 x t actual) oC
6mm
90mm
Rubber cable 1.5 mm2
AISI 316Ti, needle shaped with handle
-40+70° C
IP65, die cast aluminum
Page 30
Solid construction with high resistance against vibration according to IEC 68-2-6
Version available with cable and connection box.
Other technical characteristics (length, diameter, cable length etc.) available upon
request
Measurement of temperature in pipe, gases,
containers and tank system for mounting directly
or in thermowells
Application :
Mineral insulated
Resistance thermometer
1xPt100 or 1xPt1000 class B to DIN EN 60751
3 wire or 4 wire system
Protective sheath of Ø3.2mm or 4.5mm annealed stainless steel,
Length on request
Sensor tip Ø6x60mm or Ø8x100mm
The connecting wires are available in Teflon-braiding- Teflon
4x0.22mm2
Element :
Tube :
Cables:
Process Connect:
Mounting by compression fitting with 1/8 NPT Thread
(mean values) measured at velocities in (for tip Ø6x50mm)
Water at 0,4m/S
t0,5=7sec - t0,9=27sec
Air at 3,0/S =7sec
t0,5=24sec
Recommended measuring
max 2mA
current:
Response time:
Cable material
1 /Temperature
………Teflon -50+260 oC
x
Diam/wall thickness /mm
Φ 3.2x0.4mm………
Φ 4.8x0.4mm………
Φ 6x0.5mm…………
Φ 8x1mm……………
1
2
3
4
Mounting thread
1/8 NPT…………………
3/8”BSP…………………
½” BSP…………………
¾” BSB……………………
1
2
3
4
1
2
3
4
Number of Conductor
2 Cond……………………………
3 Cond……………………………
4 Cond……………………………
1
2
1
2
3
4
Tolerance Class/DIN
…….Class A ± 0.15 oC
…….Class B ± 0.3 oC
…….Class 1/3 DIN ± 0.1 oC
…….Class 1/6 DIN ± 0.05 oC
Resistance in ohms at oC
……………….Pt100
……………….Pt1000
Number of elements
………..1xPt
1
2
3
4
5
X
Cable Length
………250mm
………500mm
……………1m
……………2m
……………3m
…Optional length
For Inquiries of
this product
referred to
M2-46
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 31
Length/L1/ mm
Min.50mm
Max.35000mm
Optional Length.....
Head mounted analog 2-wire transmitter with digital adjustment d TRANS T03 for
connection (Type 707031) to Pt100 resistance thermometer for installation in: Terminal
Head form B to DIN 43729
For Inquiries of
this product
referred to
M2-47
Specifications
Analog 2-wire transmitter with digital adjustment for installation in terminal head Form B
Input:
Output:
Operating temperature range:
Supply Voltage:
Pt100, 3-wire
4-20 mA
-40 +85o C
7.5 - 30V DC
Standard accessories
 1 operating instruction 70.70.16.0
 Fixing items (2 screws, 2 pressure spring)
Accessories
 PC setup program, multilingual
 PC interface (electrically isolated) with TTL/RS232 converter, power supply (230V AC) and
adapter (socket)
 PC interface (electrically isolated) with TTL/RS232 converter, power supply (115V AC) and
adapter (socket)
 supply units 1-way and 4-way (Data Sheet 70.7500)
 isolating amplifier and supply isolator (Data Sheet 70.7510)
 supply unit for transmitters (Data Sheet 70.7520)
Head mounted Analog 3- wire transmitter with digital adjustment d TRANS T03 BU (Type
707033) - for connection to Pt100 resistance thermometer for installation in: Terminal
For Inquiries of
this product
referred to
M2-48
Specifications
Analog 3-wire transmitter with digital adjustment for installation in terminal head Form B
Page 32
Input:
Output:
Supply voltage:
As above
Pt100, 3-wire
0-10V
-40 +85o C
7.5-30V DC
& Accessories
Head mounted transmitter d TRANS T01 Junior (Type 707014) programmable 2-wire for
connection to resistance thermometer and thermocouples to install in: Terminal Head
form B to DIN 43729
For Inquiries of
this product
referred to
M2-49
Specifications
Input thermocouple:
Resistance thermocouple:
Connection circuit:
Output:
Operating temperature Range:
Supply Voltage:

1 operating instruction B707014

Fixing items (2 screws & 2 compression springs)
J, K, S ,R, N, DIN EN 60584
Pt100 DIN EN 60751
Pt100 JIS
Pt1000 DIN
2,3 or 4-wire circuit
4-20mA
-40 +85° C
DC 8 ... 35V
Accessories
• PC setup program, multi-lingual
• PC interface with USB/TTL converter, adapter
• supply units 1- and 4-way
• isolating amplifier and supply isolator
Head mounted transmitter d TRANS T03 J (Type 707030) Analog 2-wire with digital
adjustment to install in Terminal Head form J
For Inquiries of
this product
referred to
M2-50
Specifications
Input:
Connection circuit
Mounting
Output:
Supply voltage:
Pt100
2 wire
terminal head Form J
4-20mA
-40 to +85° C
7.5- 30 V DC
Accessories

PC setup program, multilingual

PC interface cable (isolated) with TTL/RS 232 converter, power supply (230V AC) and adapter.
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 33

Operating instruction

Fixing items
Head mounted transmitter d TRANS T01 (HART) (Type 707011) Programmable 2-wire for
connection to resistance thermometers and thermocouples and installation in: Terminal
For Inquiries of
this product
referred to
M2-51
Specifications
Input:
Thermocouple
Ni100
Ni500
Ni1000
Connection circuit
Output:
Supply voltage:
L, J, U, T, E, B, D, C, K, S ,R, N, DIN EN 60584
Pt100 DIN EN 60751
Pt100 JIS
Pt500 DIN
Pt1000 DIN
2, 3 or 4 wire circuit
4-20mA
-40 +85° C
10…35VDC
 1 operating instruction B70.7011
 Fixing items :2 screws & 2 compression springs
Accessories
 HART modem (sales No.40/00345666)
• supply units 1- and 4-way (JUMO Datasheet 70.7500)
•
Supply unit isolating transformer-with HART capability (JUMO Datasheet 40.4757)
Head mounted transmitter d TRANS T01 HART (Type 707016) Programmable 2-wire for
connection to resistance thermometers and thermocouple for installation in: Terminal
For Inquiries of
this product
referred to
M2-52
Specifications
Input:
Thermocouple
Pt1000 DIN
Ni100
Ni500
Ni1000
Page 34
Connection circuit
Output:
Supply voltage:
Certificates:
Pt100 DIN EN 60751
Pt100 JIS
Pt500 DIN
2 ,3 or 4-wire circuit
4-20mA
-40 +85° C
10…30V DC
II GEx ia IIC T6/T5/T4
II 2GEx ia IIc T6/T5/T4

1 operating instruction 70.7016

Fixing items : 2 screws & 2 pressure springs
Accessories

HART modem USB


Supply isolator for
transmitter with 2-wire connection, HART capable
(Jumo Datasheet 40.4757)
Head mounted transmitter d TRANS T01 (Type 707015) Programmable 2-wire for
connection to resistance thermometers and thermocouple for installation in: Terminal
For Inquiries of
this product
referred to
M2-53
Specifications
Input:
Thermocouple
Ni100
Ni500
Ni1000
Pt1000 DIN
Pt100 DIN EN 60751
Pt100 JIS
Pt500 DIN
Connection circuit
2, 3 or 4 wire circuit
Output:
4-20mA
-40 +85° C
Supply Voltage:
8…30V DC
Certificates:
II 1GEEx ia IIC T6/T5/T4

1 operating instruction 70.7015 & Fixing items : 2 screws & 2 pressure springs
Accessories
• PC setup program, multi-lingual - PC interface cable with TTL/RS 232 con & adapter
Head mounted transmitter APAQ-HCF T/C for thermocouple input, 4-20mA output.
For Inquiries of
this product
referred to
M2-54
Input:
Input:
Input:
Monitoring:
Adjustments:
Adjustments:
Output:
Output:
Output:
Temperature: Ambient, operating:
Response time 10-90%:
Power supply voltage:
Permissible ripple:
Linearity (mA output to mV input):
Calibration
Material / Flammability(UL):
Mounting:
Connection, single/stranded wires:
Protection, housing with
cover/terminals:
Thermocouples selectable: type J, L, T, K and N with ranges
within -5 to +55 mV
impedance: >5 MΩ
Max. sensor wire resistance: 500 Ω (total loop)
Sensor break detection, selectable: Upscale ~25 mA,
downscale ~3 mA
Span, selectable: 10 to 50 mV
Span, ﬁne adjustment: ±10 %
Current: 4 - 20 mA
Current limitation: ~ 25 mA
Permissible load: 700 Ω @ 24 VDC, 25 mA
-40°C to +85° C
≤ 0.2 s
6.5 to 32 VDC (polarity protected)
4 Vp-p @ 50/60 Hz
±0.1 % of mV span
±0.1 % of span
Zinc alloy + ABS / V0
DIN B-head or larger
≤2.5 mm2, AWG 14
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
IP 20 / IP 10
Page 35
Specifications
DIN Rail transmitter dTrans T03T PT100, 4-20mA output
For Inquiries of
this product
referred to
M2-55
Specifications
Transmitters T03T are designed for industrial applications, used to measure temperatures through
Pt100 resistance thermometers in 2-/3-wire circuit connections. Output 4-20mA is linear with
temperature calibration / configuration of the transmitter from a PC using Jumo’s setup program for
adjustable / configurable parameters.
It features fine calibration / adjustment of the output signal of a transmitter.
Input:
Analogue output:
Supply voltage:
Calibration / configuration accuracy:
Pt100 (EN 60751) from -200°C to +850°C
4-20mA
7,5 – 30 V DC
≤ ±0,2% or ≤ ±0,2°C
Accessories



PC setup program, multilingual
PC interface (electrically isolated) with TTL/RS232 converter, power supply (230V AC) and
adapter (socket)
PC interface (electrically isolated) with TTL/RS232 converter, power supply (115V AC) and
adapter (socket)
DIN Rail transmitter APAQ-LR PT100, 4-20mA output
For Inquiries of
this product
referred to
M2-56
Page 36
Specifications
Input:
Sensor Failure
Fine adjustment:
Zero:
Output:
Operating
temperature:
Galvanic isolation:
Power supply:
Typical accuracy:
Input:
Pt100 3-wire connection
upscale, downscale
± 10%
from -50°C to +50°C (from -60°F to +120°F)
4-20 MA
from -20°C to +70°C
NO
from 6,5 to 32VDC
± 0,15% of temperature span
Pt100 3-wire connection
DIN Rail 2-wire transmitter APAQ-LC
T/C for thermocouples, 4-20mA output
For Inquiries of
this product
referred to
M2-57
Specifications
Input:
Sensor Failure
Span:
Fine adjustment:
Output:
Operating
temperature:
Galvanic isolation
Power supply:
Typical accuracy:
T/C J,L,T,K,N
upscale, downscale
from 10 to 50MV continuously
± 10%
4-20 MA
from -20°C to +70°C
NO
from 6,5 to 32VDC
±0,5% to ±1,0% of temperature span
DIN Rail universal-programmable transmitter d TRANS T02 PCP
For Inquiries of
this product
referred to
M2-58
Specifications
The dTRANS T02 PCP is a digital 4-wire transmitter/signal conditioner with isolation of the standard
signal, custom linearization, 2 alarms, 2 LEDs and fine adjustment with 2 push buttons or the setup
program. Features excellent long-term stability and probe break and short circuit detection.
Utilization of setup software allows true online communication with display of actual value.
Input:
Analog Output:
Digital Output:
Supply:
TC, RTD, voltage, current, resistance transmitter, potentiometer
0-20mA or 4-20mA or 0-10V or 2-10V
alarm: 2 open-collector outputs
switching capacity: 35V, 100mA
20-53V AC/DC or 110-240V AC



Setup program, multilingual 70/00378730
PC interface with TTL/RS232 converter and adapter (socket) 70/00350260
PC interface with USB/TTL converter, adapter (socket) and adapter (pins) 70/00456352
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 37
Accessories
DIN Rail programmable transmitter dTRANS T04 – 4 wire Transmitter, settable via DIP
switch/PC setup program (707040) for connection to Pt100/Pt1000 resistance
thermometer or potentiometer; rail-mounted to EN 60715
For Inquiries of
this product
referred to
M2-59
Specifications
The transmitters intended for industrial applications record the temperature or the resistance with an
RTD temperature probe Pt100, Pt1000, or a potentiometer in 2-wire or 3-wire connection. The
continuous analog signal path allows for fast output reaction times in the event of a temperature
change (analog permanent measurement instead of digital sampling rate). This results in a low-noise
and interference-resistant output signal. High precision is ensured by range-specific amplification –
even in small measuring ranges. The transmitter is set directly on the device using DIP switches or
with the PC setup program.
Input:
Analog Output:
Supply:
Pt100,Pt1000 2-3 wire, Potentiometer
0-20mA or 4-20mA or 0-10V
110-240 AC, 20-53 AC/DC
Accessories
PC interface with converter USB/TTL, JUMO/707040
Page 38

Series TWT- Screw-in pocket for systems where drain- or pressure- less installations/
exchanging of thermocouples or resistance thermometers are required.
For Inquiries of
this product
referred to
M2-60
Specifications
pockets in different materials:
operating pressure :
Immersion Length:
Outside diameter:
Process Connection:
Temperature range:
steel 1.0305, stainless steel 1.4571, steel 1.7335
up to 450 bar
100mm
8mm,10mm,12mm,15mm
R ½ BSP, ¾ BSP or NPT
up to 800°C
Series TWT- Screw-in pocket for systems where drain or pressure less installations /
exchanging of thermocouples or resistance thermometers.
For Inquiries of
this product
referred to
M2-61
Specifications
Type:
Sheath materials:
Tip thickness:
Immersion Length:
Outside diameter:
Process Connection:
Temperature range:
Welded Pocket
AISI 316L or 304
4mm
100mm, 250mm, 300mm, 600mm
15mm
R 3/4 BSP male – M24x1.5 male
up to 800°C
Page 39
request
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 40
Intrinsic safety barriers
Page 41
Intrinsic safety barriers
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Miniature Connector with thermocouple material contacts
For Inquiries of
this product
referred to
M2-62
Specifications
Thermowells are used for installing thermocouples resistance thermometers,whenever replacement
without draining the system and/or pressure resistance are required
Body material:
Maximum cable diameter:
Wire terminals:
Maximum temperature rating:
Tough, self-extinguishing thermoplastic compound with low moisture
absorption rate and good dielectric strength
min. 0,12mm, max. 0,8mm
screw type for quick wiring , 5mm
200°C
Standard Connector with thermocouple material contacts
For Inquiries of
this product
referred to
M2-63
Specifications
Thermowells are used for installing thermocouples resistance thermometers,whenever replacement
Body material:
Maximum cable diameter:
Wire terminals:
Tough, self-extinguishing thermoplastic compound with low moisture
absorption rate and good dielectric strength
1.6mm
6.4mm
200°C
Standard panel with Thermocouple material contacts
For Inquiries of
this product
referred to
M2-64
Specifications
Page 42
Thermowells are used for installing thermocouples resistance thermometers, whenever replacement
Front panel:
Panel dimensions:
Panel cut out:
Depth behind panel:
Maximum conductor dimension:
anodized aluminum 2,4mm thick
38x38mm
square or round 30mm
20mm
200°C
1.6mm
Series MAGN: Level Switches-Magnetic Float with reed relays
For Inquiries of
this product
referred to
M2-65
Specifications
Material of wetted parts:
Medium density:
Max. process pressure :
Process connection:
Medium temperature range
Nominal float dimension:
Output:
Switching rate:
Distance of switches:
Mechanical Protection:
Connection head:
Stainless steel 316 Ti
min. 0.8g/cm3
2.5 MPa (25bar) at 20oC
1 BSP , 2 BSP or 1-½ BSP
-40 oC ...+150oC
Φ27.8x30mm or 42x50mm
1-5 pcs reed switches, connecting on side of each NO/NC
120w/VA, 250V AC/DC , 3A/ reed relay
min 110mm
IP68
Type BUZ IP 65
Other technical characteristics (length, diameter,
upon request
process connection etc.) available
Series MAGN: Level Switches-Magnetic float –UTECO Magnetic float level, suitable for
level indication of normal and explosive liquids and can be used for level control tasks
For Inquiries of
this product
referred to
M2-66
Specifications
Material:
Immersion length:
stainless steel 1.4571
80mm
Medium density:
Max. 25bar
1 BSP , 2 BSP or 1-½ BSP
-40 oC ...+120oC
-20 oC ...+70oC
Φ27.8x30mm or 42x50mm
1 reed switch, NO/NC
120W/VA, 250V AC/DC, max. 3A
40mm+-3mm from the cottom of the protecting tube
cylindrical
cable length 3m, 3x0,5mm with insulation polypropylene
BSP : ¼ or 3/8
min 110mm
IP68
request
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 43
Max. process pressure :
Process connection:
Medium temperature range
Ambient temperature:
Nominal float dimension:
Output:
Switching rate:
Switching point:
Float shape :
Electrical connection
Process Connection:
Distance of switches:
Mechanical Protection:
min. 0.7kg/dm3
For Inquiries of
this product
referred to
M2-67
Specifications
Material:
Diameter rod:
Process connection:
Insulation rod electrode:
Temperature range:
Length rod electrode:
Number of electrode:
Terminal box:
st. st. 1.4571
4mm
R ½ or 1½ BSP
PFA or PVC
from 0° C to 200° C
350mm, 500, 1000mm
1,2,3,4 or 5 electrode
Plastic,IP65
Other technical characteristics (length, number of electrodes, connections etc.) available
upon request
Electronic units – amplifiers available upon request
For Inquiries of
this product
referred to
M2-68
Specifications
Material:
Diameter rod:
Process connection:
Insulation rod electrode:
Temperature range:
stainless steel 14571
4 mm
R ¼ BSP
PFA
from 0° C to 260° C
Page 44
Electronic units – amplifiers available upon request
ACCESSORIES – Connection Head
Connection head type XDA ATEX 94/9/EC,
EN 50018, EN60079-1
Material of body and cover :aluminum diecasting
Service temperature :
Cable gland:
Process thread:
-50+150 C silicon rubber
¾ NPT
½ NPT
Protection degree :
IP65
Certificate no.
EEXD IIC T6 IP65
Ordering Nr.
U3880373001
Connection head type KNE
Cable gland washer-zinc-Plated press steel
Cover chain-chrome-plated steel
Cable gland:
Process thread:
Protection degree :
Ordering Nr.
-40+150 C silicon rubber
M20x1,5
½ NPT
IP65
U3000312111
Connection head to DIN EN 50446 FORM B
Cable gland:
Process thread:
-40+100 C
M20X1.5
B15 or M24X1,5mm
Protection degree :
IP65
B15
U320033111
M24X1,5mm U399033211
Page 45
Ordering Nr.
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Connection head type XD-SD
Material of body and cover : Stainless
steel DIN 1.4401 AISI 316
Cable gland:
Process thread:
T=-50+150 C Silicon rubber
Maximum space for transmitter
(without spring loading Ø
58x35mm)
M20X1.5 (double)
1/2NPT
Protection degree :
IP68
Flame proof
zone1, zone 21
Zone 2, zone 22
Ordering Nr.
U3000333023
Connection head form BUZH
Cable gland:
Process thread:
Protection degree :
Ordering Nr.
-40+100 C
M20X1.5
M24X1,5mm
IP65
U3000312110
Connection head to DIN EN 50446 Form A
Material of body and cover : Aluminum
die-casting
Cable gland:
Process entry:
Protection degree :
IP64
A22 U3000322110
A32 U3000326110
Page 46
Ordering Nr.
-40 +100° C
M20X1.5mm
D 22,8mm or 32,5mm
Connection head TYP BBK to DIN EN 50446 Form B
Material of body and cover : PPO Plastic
Cable gland:
Process thread:
Protection degree :
Ordering Nr.
-30 ° C to 130°C
M20X1.5mm
M24x1,5
IP65
U3200382160
Connection head form J (miniature head)
Material of body and cover :aluminumcasting
Cable gland:
Process thread:
Protection degree :
IP65
U3200351160
Page 47
Ordering Nr.
-40 to +100° C
M16X1.5mm
M12X1mm
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
ACCESSORIES-Cable Gland
Screwed cable gland Euro top brass
With the new Euro-Top Connect, which is equipped with a
special sealing insert, it is possible to secure cables with
pre-assembled connectors particularly easy and quickly
Material:
Sealing :
Clamping insert :
Temperature :
Thread metric
Nickel plated brass
Neoprene
Polyamide o-ring Perbunan (NBR)
-40° C to +100° C
acc to EN 60423
Protection class :
IP68
Size:
M20x1,5
Clamping range :
Wrench size
Ordering Nr.
Notes integrated strain
relief acc to EN 50262
6.0 to 12 mm
22/22
U3981770004
Cable gland for armored cables
Suitable for use in areas less than 2000 cm3 with gas
group IIC according to EN 50014/50018
The cable gland is suitable for direct insertion into the
apparatus installation.
For use in gas and dust potentially hazardous
areas zone 1 and 2
groups IIA,IIB and IIC
Exd and Exe 2G and D
Temperature :
Entry thread
Clamping flange
Material
Sealing :
Certificates:
Page 48
Approvals
Protection class
:
Wrench size
40° C to +110 ° C=LCIE 97 ATEX 6008
X102
NPT ½”
3.0 to 12,0 mm
St. St. ( 316L)
Neoprene
IMQ08 ATEX 021X
Marking Ex II 2GD
Exd II CGb/Exell CGb/ Extb III CDb
ATEX
IP66/68
22/22
Other entry
thread :
NPT 3/8, NPT ¾
NPT 1”, NPT 1 ¼’’
NPT 1- 1/2”, NPT 2’’
NPT 2- 1/2”, NPT 3’’
NPT 4’’
Ordering Nr.
U3981770061
Screwed cable gland Euro top Polyamide
With the new Euro-Top Connect, which is equipped with a special
sealing insert, it is possible to secure cables with pre-assembled
connectors particularly easy and quickly
Material:
Sealing :
Thread metric
Temperature :
Entry thread
Clamping range
Protection class :
Size:
Wrench size
Ordering Nr.
Polyamide 6
Neoprene
acc to EN 60423
-30° C to +80 ° C intermittent to +150° C
NPT ½”
6.0 to 12 mm
Notes integrated strain relief acc to EN 50262
IP68
M20x1,5mm
24/24
398177D0G1
Cable gland for armored cables
Operating conditions: dangerous area group II zone 1-2-21-22,
Indoor high humidity, dusts and oil and /or outdoor rain exposed
Thread standard:
Ambient Temperature:
Protection mode:
GK UNI 6125 pr NPT or ISO Metric
Material standard zinc- plated steel
-40 ° C to +110° C
112GDExd IIC, Exe, Exi.ExtDA21 IP66/67
Size:
1/2 NPT or ¾ NPT
Cable Dimensions:
Ø Max 9 to 17mm
Ordering Nr.
3981770060
Temperature measuring transmitter for MSD4 Power connector 4-20 mA or 0-10V
Sensor Connector:
Sensor connection
Measuring current
Output signal
Loop voltage:
Sensor fracture
Sensor short circuit
Type of clamps :
Weight :
Power connector:
Cable gland:
Process entry:
Protection degree :
Ordering Nr.
RTD acc. to EN 60751 (e.g. PT100)
2-wire circuit
0,8 mA
4-20 mA 2 wire current loop
Also Available 0-10V
7.5-36 V DC
>24mA
<2.6mA
Screw clamps
approx.30g
DIN EN 175301-803 (DIN 43650)
Binder MSD4, Hirschmann GDM
-40 +100° C
M20X1.5mm
D 22,8mm or 32,5mm
IP64
4-20mA 0-100 ° C
U3001200003
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 49
UTECO transmitter transforms the temperature sensitive resistance of a RTD into a 4 to 20 mA.
The housing of the transmitter is a female power connector DIN EN 175301-803 (DIN 43650)
Thus the refitting of a transmitter for a temperature sensor with a power connector is possible by
simple replacement of the female part of the connector
Standard Connector Female 3 pole Ø contacts Ø 2mm
Specification:

6,9,12 and 19 Contacts of Ø 1-1.5 - 2
3 to 52 contacts, of Ø 2-3 and 4mm
 Contacts to be soldered
 Cord section max. 1,34-3,18-5,26mm2
 Standard series
 Water proof standard series
 High voltage series

Usage temperature:
Protection degree :
Ordering Nr.
-40° C to +100 ° C
IP 50,54 with joint under base
U3001643202
Standard connector male 4 pole Ø contacts Ø 2mm
Specification:

6,9,12 and 19 Contacts of Ø 1-1.5 - 2
 Standard series

Usage temperature:
Protection degree :
Ordering Nr.
-40° C to +100 ° C
U3001644908
Standard panel connector male 4 pole Ø contacts Ø 2mm
Specification:
6,9,12 and 19 Contacts of Ø 1-1.5 - 2
 Standard series

-40° C to +100 ° C
U3001644104
Page 50
Usage temperature:
Protection degree :
Ordering Nr.

Compensating & extension cables
Code: 1-50-50-23-01-0
Type: AN 11 LR 2Χ1,5 mm2
For thermocouple : Type Κ NiCr-Ni
Color code: Acc to IEC 584
Insulation: Silicone – Fiberglass-Braid
Resistance to temperature: up to 180°C
External diameter: 6,2 mm
Code: 1-50-50-23-02-0
Type: AN 11-4LR 4x1,50
For thermocouple: Type Κ NiCr-Ni
Insulation: Silicone – Silicone - Braid
Code: 1-00-50-23-03-4
Type: 2X1,3 mm2 PVC-PVC (flat)
Color code: Acc to DIN 43710
Insulation : PVC - PVC
Resistance to temperature : up to 70°C
External diameter : 6,7 mm
Code: 1-00-50-23-08-0
Type: 2X0,22 mm PVC-PVC (Round)
Insulation: PVC - PVC
Code: 1-00-50-25-01-0
Type: JX 2X0,5 Fiber-Fiber-Braid
For thermocouple: Type J Fe-CuNi
Insulation: Fiber – Fiber - Braid
Code: 1-83-50-23-09-0
Type: G/G-24-KK (G3 NICR-NI) 2x0,5
Color code: Acc to ANSI MC 96.1
Insulation: Fiber - Fiber
Code: 1-00-50-03-04-6
Type: RT-Y(St)YSWAY-fl 1x2x1,29 mm NiCr-Ni
For thermocouple: Type K NiCr-Ni
Color code: Acc to ANSI MC 96.1
Insulation: PVC–Aluminum foil -Steel Wire Armor-PVC
External diameter: 13,1mm
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 51
Code: 1-00-50-24-04-0
Type: SX PVC-SCH-PVC 16x2x0,50 mm2
For thermocouple: Type S PtRh10-Pt
Color code: Acc to DIN 43710
Insulation: PVC – Aluminum foil - PVC
External diameter : 19,2 mm
High Temperature Cables
Code: 1-52-50-02-13-1
Type: SIHF-GLS(GLP) 3X1,5 mm2
Insulation: Silicone-Silicone-Fiberglassς-Braid
Resistance to temperature: up to 180ºC
Form: Round
Code: 1-00-50-02-13-0
Type: PFA-SS-PFA 3X1,5 mm2
Insulation: Teflon-Braid-Teflon
Form: Round
Code: 1-98-50-02-13-7
Type: Teflon- Fiber-Braid 3XAWG16
Insulation: Teflon- Fiberglass-Braid
Form: Round
Code: 1-00-50-00-00-0
Type: VIBRA RV 1.00 STV02 2X1,0 mm
Insulation: Vibraflame – Braid- Vibraflame
Resistance to temperature: -196ºC …+1565ºC
Form: Round
Code: 1-00-50-00-00-5
Type: PT100 3X0,5 FIBER-FIBER-BRAID
Insulation: Fiber – Fiber - Braid
Form: Round
Code: 1-00-50-02-14-1
Type: Hyflon-Silicon 4X0,22 mm2
Insulation: Hyflon - Silicone
Form: Round
Page 52
Code: 1-20-50-00-00-4
Type: 62849 4X0,14mm2
Insulation: Teflon – Braid - Teflon
Resistance to temperature : up to 260ºC
Form: Round
Marine Approved Cables
Cable Category
Cable Type
Product Code
Multicored cables Type:RTFRO
300/500V
Teflon-Braid-Teflon RTFRO 3 x 0,75
1-53-50-00-05-3
Developed for demanding installations in tough areas such as engine rooms and control rooms, RTFRO diesel
engine cable are able to offer mechanical strength which enables installation without added protection along with
a wide temperature range of -65oC to +150oC that can guarantee a long lifetime, even when placed close to the
heat source. RTFRO diesel engine cables are oil and chemical resistant and flame retardant to IEC 60332-3
adding major safety benefits.
Insulation: ETFE
Sheath color: Black
Core identification: Tin Plate Copper (TPC)
Number of cores: 3 cores
Filling Screen: Tin plated copper drain wire beneath
braid of tin plated copper wire (85% min coverage)
Rated Voltage: 300 / 500V
Description
no. / size
mm2
approval
body
Test Voltage: 1 minute at 5 kV DC
Flame retardance test:
Low smoke generation: IEC 60332-3RoHS
Resistance to temperature: -65oC to +150oC
Rated Voltage: 300 / 500V
Test Voltage: 1 minute at 5 kV DC
Flame retardance test:
Low smoke generation: IEC 60332-3RoHS
cabled
shield (s)
sheath (s)
max 0
Weight
g/m
amps at
40oC Max
2x 0,75
ABS
DNV
GL
NKK
3,9
4,8 x 5,8
5,6 x 6,6
79
12,8
2x 1,50
ABS
DNV
GL
NKK
5,4
6,3 x 7,3
7,3 x 8,3
123
20,2
3x 0,50
ABS
DNV
GL
NKK
3,9
4,6 x 5,6
5,4 x 6,4
70
9,1
3x 0,75
ABS
DNV
GL
NKK
4,2
5,1 x 6,1
5,9 x 6,9
87
11,9
3x 1,50
ABS
DNV
GL
NKK
5,7
6,6 x 7,6
7,6 x 8,6
134
18,7
4x 0,50
ABS
DNV
GL
NKK
4
4,8 x 5,8
5,6 x 6,6
72
8,2
4x 0,75
ABS
DNV
GL
NKK
4,7
5,6 x 6,6
6,4 x 7,4
102
10,8
4x 1,50
ABS
DNV
GL
NKK
6,3
7,2 x 8,0
8,2 x 9,0
157
17
5x 0,75
ABS
DNV
GL
NKK
5,1
6,1 x 7,1
7,1 x 8,1
120
10,1
5x 1,50
ABS
DNV
GL
NKK
7,1
8,0 x 9,0
9,1 x 10,1
192
15,9
7x 0,75
ABS
DNV
GL
NKK
5,7
6,7 x 7,7
7,7 x 8,7
143
8,7
7x 1,50
ABS
DNV
GL
NKK
7,8
8,7 x 9,7
9,8 x 10,8
215
13,8
8x 0,75
ABS
DNV
GL
NKK
6,3
7,2 x 8,2
8,2 x 9,2
164
8,3
9x 0,50
ABS
DNV
-
NKK
6,5
7,5 x 8,4
8,5 x 9,4
145
6,1
10x 1,50
ABS
DNV
-
NKK
10,1
11,2 x 12,2
12,4 x 13,4
318
12,5
12x 0,75
ABS
DNV
GL
NKK
7,7
8,6 x 9,6
9,7 x 10,7
216
7,4
20x 0,75
-
DNV
GL
-
9,6
10,6 x 11,6
12,0 x 13,0
320
6,4
RTFRO 25 x 0,75
25x 0,75
ABS
DNV
GL
NKK
10,8
11,8 x 12,4
13,2 x 13,8
370
5,7
Page 53
RTFRO 2 x 0,75
RTFRO 2 x 1,5
RTFRO 3 x 0,5
RTFRO 3 x 0,75
RTFRO 3 x 1,5
RTFRO 4 x 0,5
RTFRO 4 x 0,75
RTFRO 4 x 1,5
RTFRO 5 x 0,75
RTFRO 5 x 1,5
RTFRO 7 x 0,75
RTFRO 7 x 1,5
RTFRO 8 x 0,75
RTFRO 9 x 0,5
RTFRO 10 x 1,5
RTFRO 12 x 0,75
RTFRO 20 x 0,75
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Marine Approved Cables
Cable Category
Cable Type
Product Code
Armoured Power & Control Cable
0.6/1kV
Flame Retardant-Halogen Free-Low
Smoke emission
1-98-50-xx-xx-x
Minimum recommended installation temperature -15 oC
Lowest Operation Temperature -40 oC
Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month,
manufacturer’s name and meter marking on the sheath
Conductor: Stranded copper conductor
Insulation: XLPE plastic
Bedding: Filler tape
Armour: copper wire braid, coverage >90%
Sheath: Polyolefine plastic, SHF1
Standard colour black,other colours on request
Page 54
Number of conductors &
cross-section
n x mm2
Cross- section
of armour
mm2
Nominal outer
diameter mm
Rated Voltage: AC 0.6/1kV (1.2kV)
DC0.9/1.5kV
(if voltage to earth does not exceed 0.9kV)
Maximum conductor temp.:+90 oC
Flame-retardant: IEC 60332-1-2
IEC 60332-3-22
Halogen-free: IEC 60754 series
Smoke emission: IEC 61034 series
Approximate
weight Kg/Km
Current Rating A
at +45oC
Min. bending radius fixed
installation mm
3.1
7.5
105
40
45
1x4
3.1
8.0
130
52
50
1x6
3.5
9.5
190
72
60
1x10
4.1
10.5
260
96
65
1x16
4.9
13.0
385
127
80
1x25
5.5
14.0
490
157
90
1x35
8.7
16.5
660
196
100
1x50
1 1.4
19.0
925
242
115
1x70
11.5
20.5
1175
293
125
1x95
14.5
22.5
1475
339
140
1x12C
14.7
25.0
1780
389
155
1x150
15.2
28.0
2180
444
170
1x185
18.2
30.5
2820
522
185
1x240
18.7
34.0
3465
601
205
1x300
3.8
9.5
130
20
60
2x1.5
4.3
10.5
160
26
65
2x2.5
4.9
12.0
210
34
75
2x4
5.4
13.0
315
44
80
2x6
8.7
15.5
480
61
95
2x10
10.0
18.0
665
82
110
2x16
14.5
22.5
1030
108
140
2x25
14.7
25.0
1305
133
155
2x35
18.1
29.0
1705
167
175
2x50
18.7
33.5
2345
206
205
2x70
22.2
37.5
3020
249
225
2x95
4.1
10.0
155
16
65
3x1.5
4.6
11.0
195
21
70
3x2.5
5.2
12.5
260
28
80
5.8
14.0
370
36
85
9.3
16.5
570
50
100
10.7
19.0
805
67
115
14.6
24.0
1240
89
145
15.0
27.0
1600
110
165
18.3
31.5
2125
137
190
22.0
36.0
2970
169
220
22.8
40.0
3825
205
240
37.8
45.0
4890
237
270
39.3
50.0
5970
272
305
47.9
56.5
7500
31 1
340
4.5
11.0
180
16
70
5.0
12.5
240
21
75
5.8
13.5
320
28
85
8.8
15.5
475
36
95
10.3
18.0
695
50
110
11.9
21.5
1020
67
130
14.8
26.5
1540
89
160
18.1
29.5
2030
110
180
19.5
34.5
2675
137
210
22.6
40.0
3750
169
240
37.8
45.0
5050
205
270
39.3
50.0
6220
237
300
5.0
12.0
220
13
75
5.6
13.5
285
17
80
8.6
15.0
410
23
95
9.7
17.0
565
30
105
11.5
20.0
830
42
120
13.2
23.0
1 210
56
140
18.1
29.0
1865
74
175
5.4
13.0
265
12
80
8.5
15.0
380
16
90
9.6
16.5
390
11
100
11.5
18.5
535
14
115
9.9
17.0
440
10
105
11.5
19.C
595
13
115
10.5
18.0
490
10
110
11.8
20.5
680
13
125
11.5
19.C
545
9
115
12.5
21.5
760
12
130
11.7
19.5
610
9
120
13.2
22.5
855
11
135
13.9
23.5
780
8
140
15.7
260
1080
10
160
14.1
24.0
845
8
145
16.1
27.0
1175
10
165
16.0
26.5
1085
7
160
Page 55
3x4
3x6
3x10
3x16
3x25
3x35
3x50
3x70
3x95
3x120
3x150
3x185
4x1.5
4x2.5
4x4
4x6
4x10
4x16
4x25
4x35
4x50
4x70
4x95
4x120
5x1.5
5x2.5
5x4
5x6
5x10
5x16
5x25
7x1.5
7x2.5
10x1.5
10x2.5
12x1.5
12x2.5
14x1.5
14x2.5
16x1.5
16x2.5
19x1.5
19x2.5
24x1.5
24x2.5
27x1.5
27x2.5
37x1.5
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Data Control & High Voltage Cables
Code: 1-50-50-15-98-4
Type: LIYCY
Insulation: PVC – Braid - PVC
Code: 1-50-50-17-09-0
Type: NYMH11YO-J (YPUR) 3X1,5 mm2
Insulation : Polyurethane - Polyurethane
Very good chemical resistance
Code: 1-50-50-18-12-0
Type: S 200 3x0,75
Insulation: TPE-E - PUR
Very good chemical resistance
Highly flexible for continues bending motions
Page 56
Code: 1-50-50-22-01-0
Type: ZKBi 1,0 mm2 Y.T. 20 KV
Insulation: Silicone – Fiber glass- Silicone
20 KV High Voltage cable
Instrumentation & Bus Cables
Code: 1-52-50-01-00-5
Type: RE-2Y(St)Y-fl 300 V 2x2x1,0 mm2 Black
Insulation: PVC/OS/PVC
Code: 1-52-50-02-00-9
Type: RE-Y(St)YSWAY-fl 300V 2X2X1,0 mm2 Grey
Insulation: PVC/OS/PVC/SWA/PVC
Code: 1-52-50-06-01-1
Type: RE-Yw(St)YwSWAYw-fl 300V 1X2X1,5 mm2
Insulation: PVC/OS/PVC/SWA/PVC
Code: 1-51-50-02-00-0
Type: RE-2Y(ST)Y-PIMF 2x2x0,5 mm2 Blue
Insulation: PVC/OS/IS/PVC
Code: 1-51-50-08-02-6
Type: RE-2G(St)HSWAY-fl CI 500V 5x2x0,75 mm2
Insulation: Silicon Rubber/OS/LSZH/SWA/PVC
Standard: IEC 60331 Fire Resisting (CI)
Code: 1-51-50-06-00-0
Type: PROFIBUS FMS/DP 1x2xAWG 22/1
Conductor: solid conductors
Code: 1-00-50-06-00-1
Type: Profibus L2 7-wire 1x2x0,64
Conductor: 7 strand
Page 57
Code: 1-98-50-21-00-9
Type: CC-LINK BU 3x0,5 (AWG20/7)
Conductor: 7 strand
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 58
International Color Code for Compensating & Extension Cables
PLC
Inverter
Level Switch
Calibrator
Ex Indicators
Positioners
Proximity Switches-Sensors
Page 59
Zener Barriers
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
REPRESENTED FIRMS






Frequency Inverter for AC Motors,
PLC-Servo-HMI
SCADA
Low-Voltage Switchgears /Contactors- Breakers
CNC
Robots





Controllers, Power Units, System/Recording Technology
Analytical measurement
Pressure instruments
Thermostats and Dial thermometers
Transducers for temperature & Humidity







Intrinsic Safety Isolators 

Zener Barriers
Signal Conditioners
Fieldbus Infrastructure 

Remote I/O Systems
HART Interface Solutions

Level Measurement





Pressure & differential transmitters
Liquid level transmitters
Density transmitters
Liquid interface transmitters
Flow transmitters (Coriolis, electromagnetic, Vortex,
mass)
Temperature & humidity transmitters
Analytical instrumentation (PH, Redox, Dissolved
Oxygen…)
Recorders, Indicators, positioners, Controllers,
Accessories.
PA
Page 60



HMI + Visualization
Custom Cabinets +
Junction Boxes
Corrosion Monitoring
Separator Alarm
Systems
Sensors for Hazardous
Areas
Display instrumentation for use in safe and hazardous
areas
 Obsolete products
 Loop powered indicators
 Temperature
 Fieldbus displays
transmitters
 Fieldbus indicators
 Setpoint stations
 Serial text displays
 Digital panel meters
 Batch controllers
 Sounders &
 Totalisers
beacons
 Counter timer tacho clock
 Lamps
 Battery powered clock

Accessories
Pneumatic controllers & Transmitters
Temperature & Pressure Recorders
Positioners
I/P converters
Control Valves
Air Filter Regulator






Transmitters
Pressure switches
Temperature switches
Pressure gauges
Thermometers
Moderator






Measuring instruments
Analogue panel meters
Electrical transducers
Safety testing devices
Multi-function indicating instruments
Analogue display with stepper motor
Page 61






Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
LEVEL TRANSMITTERS
LEVEL SWITCHES
 NON-Contact Microwawe/
 Float
RADAR
 Conductivity
 Magnetic Coupling  Microwave Level Transmitter
 Magnetic Tracking  Ultrasonic Level Transmitter
 Magnetostrictive
 Vibration
 Rotary Paddle
 Hydrostatic & pressure
transmitter
Stationary & portable Ultrasonic flow meters
Mixers, agitators
Level Transmitters
Telemetry


Process calibrators
Test & Measurement / Portables
Page 62




Ordering Form
Please print this form out and send it to +30 211 1206 999
Company Name:
Contact Name:
Company
Address:
City:
Area:
Country:
Company Phone:
Company Fax:
Ordering Nr.
Type
Other Characteristics
Signature
Corporate seal
Tel. +30 211 1206 900 – Fax +30 211 1206 999 – Web:
Page 63
Quantity
Page 64

Temperature Sensors and Special Cables

Transcription

Similar documents

- Included with Park Millennium Cable TV Package

why do the pros trust trystar

Brochure - English

Brosura - Scoala Nr. 14 Ion Tuculescu, Craiova

flyer! - Lm-therm Elektrotechnik AG

Softub Brochure - A Hot Tub Place

MXCL-D0135-Maxcell Info Sheet.indd

Rookies guide to wire management

Temperature Sensors and Special Cables