Polyethylene in Russia

Transcription

www.mrcplast.com
Annual Report
Polyethylene in Russia
2016
MARKET
R E P O R T
C O M P A N Y
Polyethylene in Russia – 2016_
The information presented in this Report is strictly for the exclusive use of clients of Market
Report Company (MRC). Transfer or reproduction of any information to a third party without a
prior written consent of MRC is strictly prohibited. The information presented herein is strictly
the opinion of MRC and is based on data collected within the public sector and on data
prepared by the specialists of the Company. MRC furnishes no security or warranty and
assumes no liability as to consequences of decisions taken in regard to the information
presented in this Report.
4
Annual Report
MARKET
R E P O R T
C O M P A N Y
Methodology
1. Economic indicators in Russia
1.1 Current state and forecast of the world economy development
2. Assessment of the polyethylene market in Russia
2.1 General state of the economy in Russia
2.2 Investments into polyethylene processing
2.3 Film extrusion
2.4 Pipe extrusion
2.5 Blow molding
2.6 Cable extrusion
2.7 Extrusion pipes coatings
2.8 Extrusion coatings (packaging)
2.9 Injection molding
3. Domestic production
3.1 Domestic price history of PE in 2015 (the top grades)
4. PE. General market indicators
4.1 HDPE: general market indicators
4.2 LDPE: general market indicators
4.3 LLDPE: general market indicators
4.4 EVA: general market indicators
5. Film extrusion: PE consumption analysis
5.1 Film extrusion (blown films): PE consumption analysis
5.2 Film extrusion (cast films): PE consumtion analysis
6. Pipe extrusion: PE consumption analysis
7. Blown moulding: PE consumption analysis
8. Cable extrusion: PE consumption analysis
9. Extrusion coating: PE consumption analysis
9.1 Extrusion coating (steel pipes): PE consumption analysis
9.2 Extrusion coating (packaging): PE consumption analysis
10. Injection molding: PE consumption analysis
11. PE production anlysis
12. PE imports analysis
13. PE exports analysis
14. PE producers rating
15. PE grades rating
16. PE converters rating
17. Analysis of operations of the largest PE suppliers
5
Annual Report
MARKET
R E P O R T
C O M P A N Y
The report presents a most comprehensive research into the Russian PE market. It features
analytics offered in a new, rearranged presentation format, where the narrative recites
important points (bullets) made by our analysts, while the annex presents all the statistical
figures for the market that can ever be generated. The report reflects key trends in the PE
market by technology and sectors. It gives a great deal of attention to the analysis of
investments in PE production and processing.
The report covers analysis of PE consumption, production, exports/imports in Russia by types,
processing technologies, consumers, manufacturers and their brands, as well as business
statistics of all the major actors in the market (producers, traders, equipment suppliers and
converters) in each processing sector. All the data presented covers the period 2007 to 2015.
This being our exclusive highlight across CIS, we continue on our practice of giving ratings of
sales of the main producers of polyethylene and main PE grades. The report contains profiles
of major PE suppliers in Russia, as well as presents a rating of major PE processors. The
report will also help you to find answers to the following questions:
· PE consumption last year matched that of 2014 and was 1 mln 784 ths tonnes. Shrinking
demand for HDPE made producers to review their production plans for 2016. How will the
new plans affect the market this year?
· 2015 saw the most significant decline of demand for pipe HDPE. Who were the leaders of
production cuts? Who left the market in 2015 at all?
· The market for linear polyethylene showed minimum growth for in seven years. What factors
will drive the markets further?
· What are the main developments in the Russian polyethylene market in 2015? How will they
impact the market in the nearest feature?
· How fundamental macroeconomic factors will affect the dynamics of the PE market in 2015
and the year after? What are the trends for development of the market?
· Importance of import substitution for Russian converters: which sectors of the PE market
need it most?
· Current PE production capacities: are they adequate to accommodate present consumption
growth rate in the market or excessive?
· How strong was the growth of PE processing capacity in eqach processing sector?
· How much did each of the major Russian converters invest in PE processing? What grades
and complete production lines did they buy?
· Which sectors are expected to show PE consumption growth? Why? Which segments of the
market will generate most profits during economic crisis and help their investors/ovners to
survive?
· What were the best selling grades in 2015? Why?
· Who are TOP-20 converters in each sector? Who is on the TOP-50 converters list anyway?
· What are the specific PE grades that are most popular with producers of films, moulded
goods, pipes, cable, etc.?
· Which processing sector saw most investment inflow?
· How will the "Iranian factor" affect PE supplies to Russia? Which segment looks the most
promising for Iranian producers? What is the logistics for these possible supplies?
6
Annual Report
MARKET
R E P O R T
C O M P A N Y
List of tables (Applications)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
7
PE. General market indicators, MT (2007-2015)
PE. General market indicators, % (2007-2015)
PE consumption dynamics by PE types, MT (2007-2015)
PE consumption dynamics by technologies, MT (2007-2015)
Domestic PE supply* by regions in the previous year, MT
Dynamics of investments into PE processing by technologies.
Number of complete lines
Dynamics of investments into PE processing by technologies,
USD thous.
Dynamics of investments into PE processing by technologies,
last year, USD thous.
Commissioning of new PE processing capacities by
technologies, MT
Current PE processing capacities by technologies.
Progressive total, MT
Commissioning of new PE processing capacities by regions,
MT
Current PE processing capacities by regions. Progressive
total, MT
PE market growth factors, last year. Absolute values. 2010,
KT
HDPE. General market indicators, KT
HDPE consumption dynamics by technologies, MT
Domestic HDPE supply* by regions in the previous year, MT
HDPE suppliers, MT
HDPE suppliers in the previous year, MT
HDPE grades rating, MT
HDPE grades rating in the previous year, MT
Commissioning of new HDPE processing capacities by
technologies. Number of complete lines
Dynamics of investments into HDPE processing by
technologies, USD thous.
Commissioning of new HDPE processing capacities by
technologies, MT
Current HDPE processing capacities by technologies.
Dynamics of investments into HDPE processing by regions,
USD thous.
Current HDPE processing capacities by regions. Progressive
total. Number of complete lines
LDPE. General market indicators, MT
LDPE. General market indicators. From Belarus, MT
LDPE consumption dynamics by technologies, MT
Domestic LDPE supply* by regions in the previous year, MT
LDPE suppliers, MT
LDPE suppliers in the previous year, MT
LDPE grades rating, MT
LDPE grades rating in the previous year, MT
Commissioning of new LDPE processing capacities by
Dynamics of investments into LDPE processing by
technologies, MT
Current LDPE processing capacities by technologies.
regions, MT
Current LDPE processing capacities by regions. Progressive
total, MT
Dynamics of investments into LDPE processing by regions,
USD thous.
regions. Number of complete lines
LLDPE. General market indicators, MT
LLDPE consumption dynamics by technologies, MT
Domestic LLDPE supply* by regions in the previous year, MT
LLDPE suppliers, MT
LLDPE suppliers in the previous year, MT
LLDPE grades rating, MT
LLDPE grades rating in the previous year, MT
Commissioning of new LLDPE processing capacities by
Dynamics of investments into LLDPE processing by
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
80.
81.
82.
83.
84.
85.
86.
87.
88.
89.
90.
91.
92.
93.
94.
95.
96.
97.
98.
99.
100.
101.
102.
103.
104.
105.
106.
technologies, MT
Current LLDPE processing capacities by technologies.
regions, MT
Current LLDPE processing capacities by regions. Progressive
total, MT
Dynamics of investments into LLDPE processing by regions,
USD thous.
regions. Number of complete lines
EVA. General market indicators, MT
EVA consumption dynamics by technologies, MT
Domestic EVA supply* by regions in the previous year, MT
EVA suppliers, MT
EVA suppliers in the previous year, MT
EVA grades rating, MT
EVA grades rating in the previous year, MT
Commissioning of new EVA processing capacities by
Dynamics of investments into EVA processing by
Film extrusion: PE converters rating in the previous year
Film extrusion: Commissioning of new PE processing
capacities PE, MT
Film extrusion: PE supply analysis, MT
Film extrusion: PE supply analysis, %
Film extrusion: PE consumption by sectors, MT
Film extrusion: PE consumption by PE types, MT
Film extrusion: PE suppliers, MT
Film extrusion: PE suppliers in the previous year, MT
Film extrusion: LDPE suppliers, MT
Film extrusion: LDPE suppliers in the previous year, MT
Film extrusion: HDPE suppliers, MT
Film extrusion: HDPE suppliers in the previous year, MT
Film extrusion: LLDPE suppliers, MT
Film extrusion: LLDPE suppliers in the previous year, MT
Film extrusion: PE grades rating, MT
Film extrusion: LDPE grades rating, MT
Film extrusion: HDPE grades rating, MT
Film extrusion: LLDPE grades rating, MT
Film extrusion: TOP-20 Converters*, MT
Film extrusion: PE domestic supply by regions in the previous
year, MT
Film extrusion: TOP-20 PE consumers in the previous year,
2015, MT*
Film extrusion: TOP-20 HDPE consumers in the previous
year, 2015, MT*
Film extrusion: TOP-20 LDPE consumers in the previous
year, 2015, MT*
Film extrusion: TOP-20 LLDPE consumers in the previous
year, 2015, MT
Film extrusion: Commissioning of new processing capacities
to produce finished products, MT
Film extrusion: Current processing capacities to produce
finished products. Progressive total, MT
Film extrusion: Top-20 converters in terms of investments into
equipment. Number of complete lines
Film extrusion: Top-20 converters in terms of investments
into equipment. Cost of production line, USD thous.
equipment. Commissioning of new processing capacities, MT
equipment. Current processing capacities, progressive total,
MT
Film extrusion: Current PE processing capacities by regions.
Film extrusion: TOP-20 equipment suppliers. Number of
complete lines
Film extrusion: TOP-20 equipment suppliers. Cost of
production lines, USD thous.
Film extrusion: TOP-20 Equipment suppliers. Commissioning
of new processing capacities, MT
Film extrusion. Blown films: PE suppliers, MT
Film extrusion. Blown films: PE suppliers in the previous year,
MT
Film extrusion. Blown films: HDPE suppliers, MT
Film extrusion. Blown films: HDPE suppliers in the previous
year, MT
Annual Report
MARKET
R E P O R T
C O M P A N Y
107. Film extrusion. Blown films: LDPE suppliers, MT
108. Film extrusion. Blown films: LDPE suppliers in the previous
year, MT
109. Film extrusion. Blown films: LLDPE suppliers, MT
110. Film extrusion. Blown films: LLDPE suppliers in the previous
year, MT
111. Film extrusion. Blown films: PE grades rating, MT
112. Film extrusion. Blown films: HDPE grades rating, MT
113. Film extrusion. Blown films: LDPE grades rating, MT
114. Film extrusion. Blown films: LLDPE grades rating, MT
115. Film extrusion. Cast films: LLDPE suppliers, MT
116. Film extrusion. Cast films: LLDPE suppliers in the previous
year, MT
117. Film extrusion. Cast films: PE grades rating, MT
118. Film extrusion. Cast films: TOP-20 LLDPE consumers in the
previous year, 2015, MT*
119. Film extrusion. Cast films: Investments into processing by
finished products type, USD thous.
120. Film extrusion. Cast films: Top-20 converters in terms of
investments into equipment. Number of complete lines
investments into equipment. Cost of production lines, USD
thous.
investments into equipment. Commissioning of new
processing capacities, MT
investments into equipment. Current processing capacities,
progressive total, MT
124. Film extrusion. Cast films: TOP-20 Equipment suppliers.
125. Film extrusion. Cast films: TOP-20 Equipment suppliers. Cost
of production lines, USD thous.
126. Film extrusion. Cast films: TOP-20 Equipment suppliers.
Commissioning of new processing capacities, MT
127. Film extrusion. Multi-layer fillms: Top-20 Investors. Number of
complete lines
128. Film extrusion. Multi-layer fillms: Top-20 converters in terms
of investments into equipment. Cost of production line, USD
thous.
of investments into equipment. Commissioning of new
of investments into equipment. Current processing capacities,
131. Film extrusion. Multi-layer fillms: TOP-20 Equipment
suppliers. Number of complete lines
suppliers. Cost of production lines, USD thous.
suppliers. Commissioning of new processing capacities, MT
134. Pipe extrusion: PE converters rating in the previous year
135. Pipe extrusion: Commissioning of new PE processing
capacities PE, MT
136. Pipe extrusion: PE supply analysis, MT
137. Pipe extrusion: PE supply analysis, %
138. Pipe extrusion: PE consumption by PE types, MT
139. Pipe extrusion: PE suppliers, MT
140. Pipe extrusion: PE suppliers in the previous year, MT
141. Pipe extrusion: HDPE suppliers, MT
142. Pipe extrusion: HDPE suppliers in the previous year, MT
143. Pipe extrusion: PE grades rating, MT
144. Pipe extrusion: TOP-20 Converters*, MT
145. Pipe extrusion: PE domestic supply by regions in the
previous year, MT
146. Pipe extrusion: TOP-20 PE consumers in the previous year,
2015, MT
147. Pipe extrusion: Commissioning of new processing capacities
148. Pipe extrusion: Current processing capacities to produce
149. Pipe extrusion: Top-20 converters in terms of investments into
equipment. Number of complete lines
150. Pipe extrusion: Top-20 converters in terms of investments into
equipment. Cost of production line, USD thous.
151. Pipe extrusion: Top-20 converters in terms of investments
into equipment. Commissioning of new processing capacities,
MT
152. Pipe extrusion: Top-20 converters in terms of investments
into equipment. Current processing capacities, progressive
total, MT
153. Pipe extrusion: Commissioning of new PE processing
capacities by regions, MT
154. Pipe extrusion: Current PE processing capacities by regions.
155. Pipe extrusion: TOP-20 Equipment suppliers. Number of
complete lines
8
156. Pipe extrusion: TOP-20 Equipment suppliers. Cost of
157. Pipe extrusion: TOP-20 Equipment suppliers. Commissioning
158. Blown molding: Converters rating in the previous year
159. Blown molding: Commissioning of new PE processing
capacities PE, MT
160. Blown molding: PE supply analysis, MT
161. Blown molding: PE supply analysis, %
162. Blown molding: PE consumption by PE types, MT
163. Blown molding: PE suppliers, MT
164. Blown molding: PE suppliers in the previous year, MT
165. Blown molding: HDPE suppliers, MT
166. Blown molding: HDPE suppliers in the previous year, MT
167. Blown molding: PE grades rating, MT
168. Blown molding:TOP-20 Converters
169. Blown molding: PE domestic supply by regions in the
previous year, MT
170. Blown molding: TOP-20 PE consumers in the previous year,
2015, MT
capacities by finished products types. Number of complete
lines
172. Blown molding: Investments into processing by finished
products type, USD thous.
173. Blown molding: Commissioning of new processing capacities
174. Blown molding: Current processing capacities to produce
175. Blown molding: Top-20 converters in terms of investments
into equipment. Number of complete lines
MT
total, MT
180. Blown molding: Current PE processing capacities by regions.
181. Blown molding: TOP-20 Equipment suppliers. Number of
complete lines
182. Blown molding: TOP-20 Equipment suppliers. Cost of
183. Blown molding: TOP-20 Equipment suppliers. Commissioning
184. Blown molding. Household
chemicals/cosmetics/pharmaceuticals: Top-20 Investors.
chemicals/cosmetics/pharmaceuticals: TOP-20 Investors.
Cost of production lines, USD thous.
chemicals/cosmetics/pharmaceuticals: Top-20 converters in
terms of investments into equipment. Commissioning of new
chemicals/cosmetics/pharmaceuticals: Top-20 converters in
terms of investments into equipment. Current processing
capacities, progressive total, MT
chemicals/cosmetics/pharmaceuticals: TOP-20 Equipment
191. Blown molding. Automobile chemistry: Top-20 converters in
terms of investments into equipment. Number of complete
lines
terms of investments into equipment. Cost of production line,
USD thous.
195. Blown molding. Automobile chemistry: TOP-20 Equipment
Annual Report
MARKET
R E P O R T
C O M P A N Y
198. Blown molding. Dairy: Top-20 converters in terms of
investments into equipment. Cost of production line, USD
thous.
202. Blown molding. Dairy: TOP-20 Equipment suppliers. Number
of complete lines
203. Blown molding. Dairy: TOP-20 Equipment suppliers. Cost of
204. Blown molding. Dairy: TOP-20 Equipment suppliers.
205. Cable extrusion: PE Converters rating
206. Cable extrusion: Commissioning of new PE processing
capacities PE, MT
207. Cable extrusion: PE supply analysis, MT
208. Cable extrusion: PE supply analysis, %
209. Cable extrusion: PE consumption by PE types, MT
210. Cable extrusion: PE suppliers, MT
211. Cable extrusion: PE suppliers in the previous year, MT
212. Cable extrusion: LDPE suppliers, MT
213. Cable extrusion: LDPE suppliers in the previous year, MT
214. Cable extrusion: HDPE suppliers, MT
215. Cable extrusion: HDPE suppliers in the previous year, MT
216. Cable extrusion: PE grades rating, MT
217. Cable extrusion: LDPE grades rating, MT
218. Cable extrusion: HDPE grades rating, MT
219. Cable extrusion: TOP-20 Converters*, MT
220. Cable extrusion: PE domestic supply by regions in the
previous year, MT
221. Cable extrusion: TOP-20 PE consumers in the previous year,
2015, MT*
222. Cable extrusion: TOP-20 LDPE consumers in the previous
year, 2015, MT*
223. Cable extrusion: TOP-20 PE consumers in the previous year,
2015, MT
lines
225. Cable extrusion: Investments into processing by finished
226. Cable extrusion: Current processing capacities to produce
227. Cable extrusion: TOP-20 Converters. Number of complete
lines
228. Cable extrusion: Top-20 converters in terms of investments
MT
total, MT
232. Cable extrusion: Current PE processing capacities by regions.
233. Cable extrusion: TOP-20 Equipment suppliers. Number of
complete lines
234. Cable extrusion: TOP-20 Equipment suppliers. Cost of
235. Cable extrusion: TOP-20 Equipment suppliers.
236. Extrusion coating: PE converters rating in the previous year
237. Extrusion coating: Commissioning of new PE processing
capacities PE, MT
238. Extrusion coating: PE supply analysis, MT
239. Extrusion coating: PE supply analysis, %
240. Extrusion coating: PE consumption by sectors, MT
241. Extrusion coating: PE consumption by PE types, MT
242. Extrusion coating: PE suppliers, MT
243. Extrusion coating: PE suppliers in the previous year, MT
244. Extrusion coating: HDPE suppliers, MT
245. Extrusion coating: HDPE suppliers in the previous year, MT
246. Extrusion coating: LDPE suppliers, MT
247. Extrusion coating: LDPE suppliers in the previous year, MT
248. Extrusion coating: LLDPE suppliers, MT
249. Extrusion coating: LLDPE suppliers in the previous year, MT
250. Extrusion coating: PE grades rating, MT
251. Extrusion coating: HDPE grades rating, MT
252. Extrusion coating: LDPE grades rating, MT
9
253. Extrusion coating: LLDPE grades rating, MT
254. Extrusion coating: TOP-20 converters
255. Extrusion coating: PE domestic supply by regions in the
previous year, MT
256. Extrusion coating: TOP-20 PE consumers in the previous
year, 2010, MT*
257. Extrusion coating: TOP-20 PE consumers in the previous
year, 2010, MT
258. Extrusion coating: TOP-20 LDPE consumers in the previous
year, 2010, MT*
259. Extrusion coating: TOP-20 Finished goods exporters in the
previous year, 2015, MT
260. Extrusion coating: Investments into processing by finished
261. Extrusion coating: Commissioning of new processing
capacities to produce finished products, MT
262. Extrusion coating: Current processing capacities to produce
263. Extrusion coating: Top-20 converters in terms of investments
MT
total, MT
267. Extrusion coating: Commissioning of new PE processing
268. Extrusion coating: Current PE processing capacities by
regions. Progressive total, MT
269. Extrusion coating: TOP-20 Equipment suppliers. Number of
complete lines
270. Extrusion coating: TOP-20 Equipment suppliers. Cost of
271. Extrusion coating: TOP-20 Equipment suppliers.
272. Extrusion coating. Steel pipes: PE suppliers, MT
273. Extrusion coating. Steel pipes: PE suppliers in the previous
year, MT
274. Extrusion coating. Steel pipes: HDPE suppliers, MT
275. Extrusion coating. Steel pipes: HDPE suppliers in the
previous year, MT
276. Extrusion coating. Steel pipes: LDPE suppliers, MT
277. Extrusion coating. Steel pipes: LDPE suppliers in the previous
year, MT
278. Extrusion coating. Steel pipes: PE grades rating, MT
279. Extrusion coating. Steel pipes: HDPE grades rating, MT
280. Extrusion coating. Steel pipes: LDPE grades rating, MT
281. Extrusion coating. Steel pipes: TOP-20 PE consumers in the
282. Extrusion coating. Steel pipes: TOP-20 LDPE consumers in
the previous year, 2015, MT
283. Extrusion coating. Steel pipes: Top-20 converters in terms of
thous.
287. Extrusion coating. Steel pipes: TOP-20 Equipment suppliers.
Cost of production lines, USD thous.
290. Extrusion coating. Packaging: PE suppliers, MT
291. Extrusion coating. Packaging: PE suppliers in the previous
year, MT
292. Extrusion coating. Packaging: LDPE suppliers, MT
293. Extrusion coating. Packaging: LDPE suppliers in the previous
year, MT
294. Extrusion coating. Packaging: LLDPE suppliers, MT
295. Extrusion coating. Packaging: LLDPE suppliers in the
previous year, MT
296. Extrusion coating. Packaging: PE grades rating, MT
297. Extrusion coating. Packaging: TOP-20 LDPE consumers in
the previous year, 2015, MT*
298. Extrusion coating. Packaging: TOP-20 LLDPE consumers in
the previous year, 2015, MT*
299. Extrusion coating. Packaging: Top-20 converters in terms of
Annual Report
MARKET
R E P O R T
C O M P A N Y
thous.
303. Injection molding: PE converters rating
304. Injection molding: Commissioning of new PE processing
capacities PE, MT
305. Injection molding: PE supply analysis, MT
306. Injection molding: PE supply analysis, %
307. Injection molding: PE consumption by PE types, MT
308. Injection molding: PE suppliers, MT
309. Injection molding: PE suppliers in the previous year, MT
310. Injection molding: LDPE suppliers, MT
311. Injection molding: LDPE suppliers in the previous year, MT
312. Injection molding: HDPE suppliers, MT
313. Injection molding: HDPE suppliers in the previous year, MT
314. Injection molding: PE grades rating, MT
315. Injection molding: HDPE grades rating, MT
316. Injection molding: LDPE grades rating, MT
317. Injection molding: Top-20 converters
318. Injection molding: PE domestic supply by regions in the
previous year, MT
319. Injection molding: TOP-20 PE consumers in the previous
year, 2010, MT*
320. Injection molding: TOP-20 LDPE consumers in the previous
year, 2010, MT*
321. Injection molding: TOP-20 PE consumers in the previous
year, 2010, MT
322. Injection molding: TOP-20 Finished goods exporters in the
323. Injection molding: Finished goods exports by countries in the
previous year, 2010, MT*
lines
325. Injection molding: Investments into processing by finished
326. Injection molding: Commissioning of new processing
capacities to produce finished products, MT
327. Injection molding: Current processing capacities to produce
328. Injection molding: Top-20 converters in terms of investments
MT
total, MT
333. Injection molding: Current PE processing capacities by
regions. Progressive total, MT
334. Injection molding: TOP-20 Equipment suppliers. Number of
complete lines
335. Injection molding: TOP-20 Equipment suppliers. Cost of
336. Injection molding: TOP-20 Equipment suppliers.
337. Injection molding. Corks / closures: Top-20 converters in
terms of investments into equipment. Number of complete
lines
terms of investments into equipment. Cost of production line,
USD thous.
341. Injection molding. Corks / closures: TOP-20 Equipment
344. PE production by producers, MT
345. PE production by producers in the previous year, MT
346. PE production by types, MT
347. Current PE producing capacities. Progressive total, MT
10
348.
349.
350.
351.
352.
353.
354.
355.
356.
357.
358.
359.
360.
361.
362.
363.
364.
365.
366.
367.
368.
369.
370.
371.
372.
373.
374.
375.
376.
377.
378.
379.
380.
381.
382.
383.
384.
385.
386.
387.
388.
389.
390.
391.
392.
393.
394.
395.
396.
397.
398.
399.
400.
401.
402.
403.
404.
405.
406.
407.
408.
409.
410.
411.
412.
413.
414.
415.
416.
417.
418.
419.
420.
421.
422.
423.
424.
425.
426.
427.
428.
429.
HDPE production by producers, MT
HDPE production by producers in the previous year, MT
HDPE production by types, MT
Current processing capacities to produce HDPE. Progressive
total, MT
LDPE production by producers, MT
LDPE production by producers in the previous year, MT
PE production by types, MT
Current LDPE producing capacities. Progressive total, MT
LLDPE production by producers, MT
PE production by producers in the previous year, MT
LLDPE production by grades, MT
Current LLDPE producing capacities. Progressive total, MT
EVA production by producers, MT
EVA production by producers in the previous year, MT
Current EVA producing capacities. Progressive total, MT
Ethylene production by producers, MT
Current ethylene producing capacities. Progressive total, MT
Dynamics of PE imports by types, MT
Dynamics of PE imports by technologies, MT
PE imports by producers, MT
PE imports by grades, MT
PE imports by regions, MT
HDPE imports by countries, MT
HDPE imports by producers, MT
HDPE imports by grades, MT
HDPE imports by regions, MT
LDPE imports by countries, MT
LDPE imports by producers, MT
LDPE imports by grades, MT
LDPE imports by regions, MT
LLDPE imports by countries, MT
LLDPE imports by producers, MT
LLDPE imports by grades, MT
LLPE imports by regions, MT
EVA imports by countries, MT
EVA imports by producers, MT
EVA imports by grades, MT
EVA imports by regions, MT
Dynamics of PE exports by types, MT
PE exports by countries, MT
HDPE exports by producers, MT
HDPE exports by grades, MT
LDPE exports by producers, MT
LDPE exports by grades, MT
LLDPE exports by producers, MT
LLDPE exports by grades, MT
EVA exports by producers, MT
EVA exports by grades, MT
PE finished goods production dynamics by technologies, MT
PE finished goods imports dynamics by technologies in
PE finished goods exports dynamics by technologies in
PE producers rating, MT
HDPE producers rating, MT
LDPE producers rating, MT
LLDPE producers rating, MT
EVA producers rating, MT
PE grades rating, MT
HDPE grades rating, MT
LDPE grades rating, MT
LLDPE grades rating, MT
EVA grades rating, MT
PE converters rating
PE converters rating. PE imports, MT
Kazanorgsyntez. PE domestic supply by types, MT
Kazanorgsyntez. PE domestic supply by technologies, MT
Kazanorgsyntez. PE domestic supply by grades, MT
Stavrolen. PE domestic supply by types, MT
Stavrolen. PE domestic supply by technologies, MT
Stavrolen. PE domestic supply by grades, MT
Tomskneftechem. PE domestic supply by types, MT
Tomskneftechem. PE domestic supply by technologies, MT
Tomskneftechem. PE domestic supply by grades, MT
Borealis. PE domestic supply by types, MT
Borealis. PE domestic supply by technologies, MT
Borealis. PE domestic supply by grades, MT
Ufaorgsyntez. PE domestic supply by types, MT
Ufaorgsyntez. PE domestic supply by technologies, MT
Ufaorgsyntez. PE domestic supply by grades, MT
Angarsk Polymers Plant. PE domestic supply by types, MT
Angarsk Polymers Plant. PE domestic supply by technologies,
MT
Angarsk Polymers Plant. PE domestic supply by grades, MT
Shurtansky Gas-Chemical Plant. PE domestic supply by
types, MT
Annual Report
MARKET
R E P O R T
C O M P A N Y
430. Shurtansky Gas-Chemical Plant. PE domestic supply by
technologies, MT
431. Shurtansky Gas-Chemical Plant. PE domestic supply by
grades, MT
432. Dow. PE domestic supply by types, MT
433. Dow. PE domestic supply by technologies, MT
434. Dow. PE domestic supply by grades, MT
435. Polymir. PE domestic supply by types, MT
436. Polymir. PE domestic supply by technologies, MT
437. Polymir. PE domestic supply by grades, MT
438. Korea Petrochemical. PE domestic supply by types, MT
439. Korea Petrochemical. PE domestic supply by technologies,
MT
440. Korea Petrochemical. PE domestic supply by grades, MT
441. Salavatnefteorgsyntez. PE domestic supply by types, MT
442. Salavatnefteorgsyntez. PE domestic supply by technologies,
MT
443. Salavatnefteorgsyntez. PE domestic supply by grades, MT
444. Ineos Polyolefins. PE domestic supply by types, MT
445. Ineos Polyolefins. PE domestic supply by technologies, MT
446. Ineos Polyolefins. PE domestic supply by grades, MT
447. LyondellBasell. PE domestic supply by types, MT
448. LyondellBasell. PE domestic supply by technologies, MT
449. LyondellBasell. PE domestic supply by grades, MT
11
450.
451.
452.
453.
454.
455.
456.
457.
458.
459.
460.
461.
462.
463.
464.
465.
466.
467.
468.
469.
470.
471.
472.
Daelim. PE domestic supply by types, MT
Daelim. PE domestic supply by technologies, MT
Daelim. PE domestic supply by grades, MT
Sevilen. PE domestic supply by types, MT
Sevilen. PE domestic supply by technologies, MT
Sevilen. PE domestic supply by grades, MT
Sevilen. PE domestic supply by types, MT
Sevilen. PE domestic supply by technologies, MT
Sevilen. PE domestic supply by grades, MT
Karpatneftechem. PE domestic supply by types, MT
Karpatneftechem. PE domestic supply by technologies, MT
Karpatneftechem. PE domestic supply by grades, MT
Total Petrochemicals. PE domestic supply by types, MT
Total Petrochemicals. PE domestic supply by technologies,
MT
Total Petrochemicals. PE domestic supply by grades, MT
LG. PE domestic supply by types, MT
LG. PE domestic supply by technologies, MT
LG. PE domestic supply by grades, MT
TVK. PE domestic supply by types, MT
TVK. PE domestic supply by technologies, MT
TVK. PE domestic supply by grades, MT
Supply* from Russia to Belarus, 2008, MT
Supply* from Belarus to Russia, MT
Annual Report
MARKET
R E P O R T
C O M P A N Y
List of diagrams (Applications)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
71.
Estimated Consumption, KT (2007-2015)
Production, KT (2007-2015)
Imports, KT (2007-2015)
Exports, KT (2007-2015)
Utilization of production capacities, %
Exports to production, %
Imports to consumption, %
Domestic PE to PE consumption,%
Estimated Consumption, KT, 2015
Production, KT, 2015
Imports, KT, 2015
Exports, KT, 2015
Utilization of production capacities, %, 2015
Exports to production, %, 2015
Imports to consumption, %, 2015
Domestic PE to PE consumption,%, 2015
PE consumption structure by PE types, %, 2010
PE supply structure by technologies, %, 2010
Structure of investments into PE processing by technologies, %
to USD thous, 2010
to USD thous, 2013
to USD thous, 2014
to USD thous, 2015
Structure of PE processing capacities by technologies, %, 2010
Structure of investments into PE processing by regions, % to
USD thous, 2010
USD thous, 2013
USD thous, 2014
USD thous, 2015
PE market growth factors. By PE types, KT
PE market growth factors. By processing technologies, KT
PE market growth factors. By region, KT
PE market growth factors. By PE processing capacities, KT
PE market growth factors. By PE types, KT, 2015
PE market growth factors. By processing technologies, KT, 2015
PE market growth factors. By region, KT, 2015
PE market growth factors. By PE processing capacities, KT,
2015
PE market growth factors. By PE types, %
PE market growth factors. By processing technologies, %
PE market growth factors. By region, %
PE market growth factors. By PE processing capacities, %
PE market growth factors. By PE types, %, 2015
PE market growth factors. By processing technologies, %, 2015
PE market growth factors. By region, %, 2015
PE market growth factors. By PE processing capacities, %,
2015
HDPE. Estimated Consumption, KT
HDPE. Production, KT
HDPE. Imports, KT
HDPE. Exports, KT
HDPE. Utilization of production capacities, %
HDPE. Exports to production, %
HDPE. Imports to consumption, %
HDPE. Domestic PE to PE consumption,%
HDPE. Estimated Consumption, KT, 2015
HDPE. Production, KT, 2015
HDPE. Imports, KT, 2015
HDPE. Exports, KT, 2015
HDPE. Utilization of production capacities, %, 2015
HDPE. Exports to production, %, 2015
HDPE. Imports to consumption, %, 2015
HDPE. Domestic PE to PE consumption,%, 2015
HDPE supply structure by technologies, %, 2010
12
Ежегодный обзор
72.
73.
74.
75.
76.
77.
78.
79.
80.
81.
82.
83.
84.
85.
86.
87.
88.
89.
90.
91.
92.
93.
94.
95.
96.
97.
98.
99.
100.
101.
102.
103.
104.
105.
106.
107.
108.
109.
110.
111.
112.
113.
114.
115.
116.
117.
118.
119.
120.
121.
122.
123.
124.
125.
126.
127.
128.
129.
130.
131.
132.
133.
134.
135.
136.
HDPE consumption structure by suppliers, %, 2010
HDPE consumption structure by grades, %, 2010
technologies, % to USD thous, 2010
HDPE capacities structure by technologies, %, 2010
Structure of investments into HDPE processing by regions, % to
USD thous, 2010
USD thous, 2013
USD thous, 2014
USD thous, 2015
LDPE. Estimated Consumption, KT
LDPE. Production, KT
LDPE. Imports, KT
LDPE. Exports, KT
LDPE. Utilization of production capacities, %
LDPE. Exports to production, %
LDPE. Imports to consumption, %
LDPE. Domestic PE to PE consumption,%
LDPE. Estimated Consumption, KT, 2015
LDPE. Production, KT, 2015
LDPE. Imports, KT, 2015
LDPE. Exports, KT, 2015
LDPE. Utilization of production capacities, %, 2015
LDPE. Exports to production, %, 2015
LDPE. Imports to consumption, %, 2015
LDPE. Domestic PE to PE consumption,%, 2015
LDPE supply structure by technologies, %, 2010
LDPE consumption structure by suppliers, %, 2010
LDPE consumption structure by grades, %, 2010
Structure of investments into LDPE processing by technologies,
% to USD thous, 2010
LDPE capacities structure by technologies, %, 2010
Structure of investments into LDPE processing by regions, % to
USD thous, 2010
USD thous, 2013
USD thous, 2014
USD thous, 2015
LLDPE. Estimated Consumption, KT
LLDPE. Production, KT
LLDPE. Imports, KT
LLDPE. Exports, KT
MARKET
R E P O R T
C O M P A N Y
137.
138.
139.
140.
141.
142.
143.
144.
145.
146.
147.
148.
149.
150.
151.
152.
153.
154.
155.
156.
157.
158.
159.
160.
161.
162.
163.
164.
165.
166.
167.
168.
169.
170.
171.
172.
173.
174.
175.
176.
177.
178.
179.
180.
181.
182.
183.
184.
185.
186.
187.
188.
189.
190.
191.
192.
193.
194.
195.
196.
197.
198.
199.
200.
201.
202.
203.
204.
205.
13
LLDPE. Utilization of production capacities, %
LLDPE. Exports to production, %
LLDPE. Imports to consumption, %
LLDPE. Domestic PE to PE consumption,%
LLDPE. Estimated Consumption, KT, 2015
LLDPE. Production, KT, 2015
LLDPE. Imports, KT, 2015
LLDPE. Exports, KT, 2015
LLDPE. Utilization of production capacities, %, 2015
LLDPE. Exports to production, %, 2015
LLDPE. Imports to consumption, %, 2015
LLDPE. Domestic PE to PE consumption,%, 2015
Structure of investments into LLDPE processing by
LLDPE consumption structure by suppliers, %, 2010
LLDPE consumption structure by grades, %, 2010
LLDPE capacities structure by technologies, %, 2010
Structure of investments into LLDPE processing by regions, %
to USD thous, 2010
to USD thous, 2013
to USD thous, 2014
to USD thous, 2015
EVA. Estimated Consumption, KT
EVA. Production, KT
EVA. Imports, KT
EVA. Exports, KT
EVA. Utilization of production capacities, %
EVA. Exports to production, %
EVA. Imports to consumption, %
EVA. Domestic PE to PE consumption,%
EVA. Estimated Consumption, KT, 2015
EVA. Production, KT, 2015
EVA. Imports, KT, 2015
EVA. Exports, KT, 2015
EVA. Utilization of production capacities, %, 2015
EVA. Exports to production, %, 2015
EVA. Imports to consumption, %, 2015
EVA. Domestic PE to PE consumption,%, 2015
Structure of investments into EVA processing by technologies,
EVA consumption structure by suppliers, %, 2010
EVA consumption structure by grades, %, 2010
Film extrusion: Estimated consumption, KT
Film extrusion: Domestic supply, KT
Film extrusion: Imports, KT
Film extrusion: Production of polymer films, KT
Film extrusion: Utilization of production capacities, %
206. Film extrusion: Share of domestic PE in PE consumption
growth, %
207. Film extrusion: PE imports to consumption, %
208. Film extrusion: Domestic PE to PE consumption, %
209. Film extrusion: Estimated consumption, KT, 2015
210. Film extrusion: Domestic supply, KT, 2015
211. Film extrusion: Imports, KT, 2015
212. Film extrusion: Production of polymer films, KT, 2015
213. Film extrusion: Utilization of production capacities, %, 2015
214. Film extrusion: Share of domestic PE in PE consumption
growth, %, 2015
215. Film extrusion: PE imports to consumption, %, 2015
216. Film extrusion: Domestic PE to PE consumption, %, 2015
217. Film extrusion: PE consumption structure by PE types, %, 2010
221. Film extrusion: investments into processing by finished products
types, % to USD thous, 2010
225. Pipe extrusion: Estimated consumption, KT
226. Pipe extrusion: Domestic supply, KT
227. Pipe extrusion: Imports, KT
228. Pipe extrusion: Production of polymer Pipes, KT
229. Pipe extrusion: Utilization of production capacities, %
230. Pipe extrusion: Share of domestic PE in PE consumption
growth, %
231. Pipe extrusion: PE imports to consumption, %
232. Pipe extrusion: Domestic PE to PE consumption, %
233. Pipe extrusion: Estimated consumption, KT, 2015
234. Pipe extrusion: Domestic supply, KT, 2015
235. Pipe extrusion: Imports, KT, 2015
236. Pipe extrusion: Production of polymer Pipes, KT, 2015
237. Pipe extrusion: Utilization of production capacities, %, 2015
238. Pipe extrusion: Share of domestic PE in PE consumption
growth, %, 2015
239. Pipe extrusion: PE imports to consumption, %, 2015
240. Pipe extrusion: Domestic PE to PE consumption, %, 2015
241. Pipe extrusion. Consumption structure by PE types,%, 2010
245. Pipe extrusion: Investments into processing by finished
products type, % to USD thous, 2010
249. Blown molding: Estimated consumption, KT
250. Blown molding: Domestic supply, KT
251. Blown molding: Imports, KT
252. Blown molding: Production in EBM-packaging, KT
253. Blown molding: Utilization of production capacities, %
254. Blown molding: Share of domestic PE in PE consumption
growth, %
255. Blown molding: PE imports to consumption, %
256. Blown molding: Domestic PE to PE consumption, %
257. Blown molding: Estimated consumption, KT, 2015
258. Blown molding: Domestic supply, KT, 2015
259. Blown molding: Imports, KT, 2015
260. Blown molding: Production in EBM-packaging, KT, 2015
261. Blown molding: Utilization of production capacities, %, 2015
262. Blown molding: Share of domestic PE in PE consumption
growth, %, 2015
263. Blown molding: PE imports to consumption, %, 2015
264. Blown molding: Domestic PE to PE consumption, %, 2015
269. Cable extrusion: Estimated consumption, KT
270. Cable extrusion: Domestic supply, KT
271. Cable extrusion: Imports, KT
272. Cable extrusion: Cable production, KT
273. Cable extrusion: Utilization of production capacities, %
MARKET
R E P O R T
C O M P A N Y
274. Cable extrusion: Share of domestic PE in PE consumption
growth, %
275. Cable extrusion: PE imports to consumption, %
276. Cable extrusion: Domestic PE to PE consumption, %
277. Cable extrusion: Estimated consumption, KT, 2015
278. Cable extrusion: Domestic supply, KT, 2015
279. Cable extrusion: Imports, KT, 2015
280. Cable extrusion: Cable production, KT, 2015
281. Cable extrusion: Utilization of production capacities, %, 2015
282. Cable extrusion: Share of domestic PE in PE consumption
growth, %, 2015
283. Cable extrusion: PE imports to consumption, %, 2015
284. Cable extrusion: Domestic PE to PE consumption, %, 2015
289. Extrusion coating: Estimated consumption, KT
290. Extrusion coating: Domestic supply, KT
291. Extrusion coating: Imports, KT
292. Extrusion coating: Steel pipes production, KT
293. Extrusion coating: Utilization of production capacities, %
294. Extrusion coating: Share of domestic PE in PE consumption
growth, %
295. Extrusion coating: PE imports to consumption, %
296. Extrusion coating: Domestic PE to PE consumption, %
297. Extrusion coating: Estimated consumption, KT, 2015
298. Extrusion coating: Domestic supply, KT, 2015
299. Extrusion coating: Imports, KT, 2015
300. Extrusion coating: Steel pipes production, KT, 2015
301. Extrusion coating: Utilization of production capacities, %, 2015
302. Extrusion coating: Share of domestic PE in PE consumption
growth, %, 2015
303. Extrusion coating: PE imports to consumption, %, 2015
304. Extrusion coating: Domestic PE to PE consumption, %, 2015
305. Extrusion coating: PE consumption structure by sectors, MT,
2010
2013
2014
2015
313. Injection molding: Estimated consumption, KT
314. Injection molding: Domestic supply, KT
315. Injection molding: Imports, KT
316. Injection molding: Production of PE molded goods, KT
317. Injection molding: Utilization of production capacities, %
318. Injection molding: Share of domestic PE in PE consumption
growth, %
319. Injection molding: PE imports to consumption, %
320. Injection molding: Domestic PE to PE consumption, %
321. Injection molding: Estimated consumption, KT, 2015
322. Injection molding: Domestic supply, KT, 2015
323. Injection molding: Imports, KT, 2015
324. Injection molding: Production of PE molded goods, KT, 2015
325. Injection molding: Utilization of production capacities, %, 2015
326. Injection molding: Share of domestic PE in PE consumption
growth, %, 2015
327. Injection molding: PE imports to consumption, %, 2015
328. Injection molding: Domestic PE to PE consumption, %, 2015
329. Injection molding: PE consumption structure by sectors, MT,
2010
2013
2014
2015
14
337. PE production structure by producers, %, 2010
341. PE production structure by types, %, 2010
345. HDPE production structure by producers, %, 2010
349. HDPE production structure by types, %, 2010
353. LDPE production structure by producers, %, 2010
357. LDPE production structure by types, %, 2010
361. Ethylene production structure by producers, %, 2010
365. PE imports structure by types, %, 2010
369. PE imports structure by technologies, %, 2010
373. PE imports by countries, %, 2010
377. HDPE imports structure by countries, %, 2010
381. LDPE imports structure by countries, %, 2010
385. LLDPE imports structure by countries, %, 2010
389. EVA imports structure by countries, %, 2010
393. PE exports structure by types, %, 2010
397. PE exports structure by countries, %, 2010
401. PE finished goods imports by countrie - Film extrusion, %
402. PE finished goods imports by countrie - Pipe extrusion, %
403. PE finished goods imports by countrie - Blown molding, %
404. PE finished goods imports by countrie - Cable extrusion, %
405. PE finished goods exports by countrie - Film extrusion, %
406. PE finished goods exports by countrie - Pipe extrusion, %
407. PE finished goods exports by countrie - Blown molding, %
408. PE finished goods exports by countrie - Cable extrusion, %
MARKET
R E P O R T
C O M P A N Y
List of companies referred to
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
15
A.Sсhulman
Ab Rani Plast Oy
ABB Power Technologies
Acma
Adidas
Adolf Illig Maschinenbau
Agrigazpolimer
Agropolimer
Aida Interpraysez, Singapur
Aist, Spb
Akpol Plastik
Alkan Packaging
Alkoa C-S-I Vostok
Almetevskiy trubniy zavod
Alphagary
Alpla
Alpla, Russia
Alvita
American Piledriving Equipment
American Steel Pipe
Ampacet
Amurkabel
Amut
Andizhankabel
Angarsk Polymers Plant
Angarskaya neftehimicheskaya
kompaniya
Ani Plast
Aniks
Anion
AP Plastik
Aquatech-Plast
Arburg
Arexim Packaging
Arkema
Arpechim
Artplast-T
Atlantis-Pak
Automa
AvtoVAZ
Avacha
Aysberg
A-ZET Plastik
Azovkabel
Azovskiy zavod polimernih materialov
Backup Trading
Balakovorezinotekhnika
Baltik-Kabel
Baltiyskiy Skorohod
Baltpolymer TNP
BASF
Batayskoe Po Elektrosvet Vos
Battenfeld
Bauhuis International
Baykalskaya Kosmetika
BB Moskabel
BeePlast
Beijing Fengshou International Trading
Beijing Golden Ocean Foreign
Bekum
Belplast
Bericap
Bericap, Bor
Berikap
Berstorff
Bim Finland
Bio Plast-M
Biplast, Belgorod
Biyskiy zavod stekloplastikov
Blasautomat
Blue Ocean Int
BM Biraghi
Bologovskiy armaturniy zavod
Bolshevik
Borealis
Borodino-plast
Brampton Engineering
Braskem
Brit OOO, Bryansk
Brite
80.
81.
82.
83.
84.
85.
86.
87.
88.
89.
90.
91.
92.
93.
94.
95.
96.
97.
98.
99.
100.
101.
102.
103.
104.
105.
106.
107.
108.
109.
110.
111.
112.
113.
114.
115.
116.
117.
118.
119.
120.
121.
122.
123.
124.
125.
126.
127.
128.
129.
130.
131.
132.
133.
134.
135.
136.
137.
138.
139.
140.
141.
142.
143.
144.
145.
146.
147.
148.
149.
150.
151.
152.
153.
154.
155.
156.
157.
Cangzhou Longma Steel Pipe
Manufacturing
CBE Beijing
Cedo Haushold Prodacts
Changzhou Hengcheng Plastic
Machinery
Chelyabinsk Tube-Rolling Mill
Chen De Plastics Machinery
Chevron Phillips
Chi Chang Machinery
Chin Fah Machinery
Chistopolskiy molochniy kombinat
ChodosChodov
ChTZ
Chuvashcable
Cincinnati Extrusion
Clariant
Colines
Colpak
Complect 92
Concern Kalina
Condor
Continental Plast LLC
Corma
Crown Plastics Rus
CSKB-Progress
Dae Chang Machinery
Daelim
Dagplasttrubi
Dailian Zhenghuayang Machinery
Dalaker
Danaflex
Dar
Davis Standard
Delta-pak
Demag
Demak Plastik Makina
DEXPlastomers
Diapazon Moskva
Diing Kuen
Dikos
Dioki
DKS, Group of Companies
DKS-Logistika
Dolci Bielloni Castello
Donbaskabel
Dow
DPA
D-Plast
DS-Chemie
DSM
Duminichskiy Zavod
DuPont
Dzin Chu, Kitay
Eagle Power
Ecolean
Ecopolymer
Edas Pak
Effekt
Eisenbau Kramer
Ekort
Ekotek-Plus
Ekstra plastik
Eldra
Elektrokabel Kolchugino
Elgad Polymer
Elif-Art
Eliks-Kabel
Ellipse
Elopak
Emalprovod
Em-Plast
Engel
Erndtebrucker Eisenwerk
Essel Propack
Estico Plastar
Ethylene-Polyethylene, Sumgait
Eurocabel 1
Europipe GmbH
Evroplast, Group of Companies
158.
159.
160.
161.
162.
163.
164.
165.
166.
167.
168.
169.
170.
171.
172.
173.
174.
175.
176.
177.
178.
179.
180.
181.
182.
183.
184.
185.
186.
187.
188.
189.
190.
191.
192.
193.
194.
195.
196.
197.
198.
199.
200.
201.
202.
203.
204.
205.
206.
207.
208.
209.
210.
211.
212.
213.
214.
215.
216.
217.
218.
219.
220.
221.
222.
223.
224.
225.
226.
227.
228.
229.
230.
231.
232.
233.
234.
235.
236.
237.
Exxon Mobil
Fashion Press
FGUP Saranskiy mehanicheskiy zavod
Filial Alfa-siltek
Finnpak, Group of Companies
Finnpak-Upakovka
Firat Plastik
Firma Bir Peks
Flexoland-M
Forma
Formika
Formika-Yug
Formosa
Foshan Techwell Plastic Machinery
Foshanskaya obuvnaya fabrika Inda
Fujian
Fuller
Gabriel-Chemie
Gammasyntez
Gazenergoservis
Gazprom
Gazpromtrubinvest
Gaztrubplast
Gefest-Rostov
Gefpack
General Plastics
Geo-Plast, Group of Companies
Ghioldi
Gotek, Group of Companies
Green Net Industrial
Guala Closures
Guala klouzhes - ovk
Hanwha Corporation
Harbin Gongzhun Economic
Heivco
Hekro PET Ltd.
Henco
Henkel
Henkel, Group of Companies
Himpek, Group of Companies
Himplast, Dzerzhinsk
Hipol
Hiton, Group of Companies
HMG
Honam Petrochemical
Hongqi Plastic & Packing Machinery
Huasheng Machinery
Husky
Hyplas Machinery
Hyundai Mepol Pipe
Hyundai Motor
Hyundai Petrochemical
IBG Pakplastik
ICO Polymers
Ikaplast, Group of Companies
Iljin Electric
IMG Plastec
Immid
Impuls-Plast
Industrie Poliecomb
Ineos Polyolefins
Informacionnie i Upravlyauschie Sistemi
Inter-Grim
Interkabel
Interpack, Chelyabinsk
Irkurskkabel
Isopipe
Isratek C
Italiana Conduttori
Izhevsk plastics plant
Izhora Pipe Mill
Jagtenberg Plastics
Jandi's Industrial
Jimten
Jinhu Extrusion Equipment
Jon Wai Machinery
Jowat
Julong Steel Pipe
Kaczmarek
Kai Mei Plastic Machinery
MARKET
R E P O R T
C O M P A N Y
238.
239.
240.
241.
242.
243.
244.
245.
246.
247.
248.
249.
250.
251.
252.
253.
254.
255.
256.
257.
258.
259.
260.
261.
262.
263.
264.
265.
266.
267.
268.
269.
270.
271.
272.
273.
274.
275.
276.
277.
278.
279.
280.
281.
282.
283.
284.
285.
286.
287.
288.
289.
290.
291.
292.
293.
294.
295.
296.
297.
298.
299.
300.
301.
302.
303.
304.
305.
306.
307.
308.
309.
310.
311.
312.
313.
314.
315.
316.
317.
318.
319.
320.
321.
322.
323.
16
Kaliningrad-Promplast
Kamkabel
Kang Chyau
Kanplast Complect
Kapella
Kapella, Dzerzhinsk
Karpatneftechem
Kartpol
Kashira-Plast
Kastamonu Plastik
Kaustik Volgograd
Kautex Maschinenbau
Kavkazkabel
Kazanorhsyntez
Kazanskiy z-d plastmassovih izdeliy
KBA
Keton
KF Vesna
Kharkiv Chemprom
Khartsyzsk Pipe Plant
Kiefel Extrusion
Kirov Imitation Leather Plant
Kirscable
Klimovsk Pipe Plant
Klinskiy zavod trubnoy izolyacii
Klockner Desma Ferromatik
Komiteks, Group of Companies
Kompaniya Bering, Ufa
Kompaniya kontMt
Kompaniya po pr-vu obuvi Manchini
Kompaniya smazochnih materialov
TNK-Teksako
Konfleks
Konkord, Smolensk
Konstanciya Kuban
Kopeyskiy Plastik
Kopeyskiy z-d izolyacii trub
Korea Petrochemical
Kosme
Krauss Maffei
Krista, Sizran
Kristi 98
Kuasy
Kuhne Anlagenbau
Kundong Electric
Kung Hsing Plastic Machinery
KWH Pipe
KWH Pipe
Lambumiz
Lassila&Tikanoja
Lava
Lenoblgaz
Leuna
LG
Liansu Machinery
Lietpak
Lima-Pol
Limaton
Livnyplastik
Logstor Fredericia
Logstor Polska
Longfeng
Losino-Petrovskaya Fabrika
Domashney Obuvi
LS Cable
LS Mtron
Lubrizol
Lubuchanskiy zavod plastmass
Ludinovkabel
Luigi Bandera
Lukoil-Volganefteproduct
Lukoyl-Permnefteorgsintez
Lung Meng Machinery
LyondellBasell
Macchi
Machio
Magic MP
Maillefer
Main Group
Manuli
Marvink MKM
Master-Pak
Masterplast
Matila Industrial
Mega-Plast, Group of Companies
Megolon
Mensen Packaging CIS
Metallurgicheskaya kompaniya Silin
324.
325.
326.
327.
328.
329.
330.
331.
332.
333.
334.
335.
336.
337.
338.
339.
340.
341.
342.
343.
344.
345.
346.
347.
348.
349.
350.
351.
352.
353.
354.
355.
356.
357.
358.
359.
360.
361.
362.
363.
364.
365.
366.
367.
368.
369.
370.
371.
372.
373.
374.
375.
376.
377.
378.
379.
380.
381.
382.
383.
384.
385.
386.
387.
388.
389.
390.
391.
392.
393.
394.
395.
396.
397.
398.
399.
400.
401.
402.
403.
404.
405.
406.
407.
408.
Methimteks
Metra
Micropol
Mikrosan Makina
Milton T.N.P.
Minuote Sanitary Fittings
Mir Upakovki, Group of Companies
Mitsui
Moldvakabel
MoloPak
Montazhgazspecstroy
Moscow Experimental Pipeprocurement
Plant
Mosflowline
Moskabel plant
Moskabel-Fudzhikura
Moskabelmet
Moskabel-Servis
Mosstroyindustriya
MPB
MPBK Ochakovo
M-Plastika
Muehlstein
Multiflex
Multi-Pack
Muyng-il Foamtec
Narodnaya firma Elektroprovod
Nefis Kosmetiks
NeftehimSevilen
Neftemaslozavod
Negri Bossi
Neksans SNG
Netstal Maschinen
Neva Kabel
Nevskaya Kosmetika
Nexans
Ningbo Haitian
Nizhnekamskneftechem
Nizhpolimerupak
NK Cables
NKT Cables Group
Nordenia
Nordeniya Slavnika
Nova Chemicals
Nova Roll-Stretch
Novatek-Polymer
Novembal
Novera
Novie trubnie tehnologii-Peresvet
Novkabel, Serbiya
Novokuybishevskiy zavod masel i
prisadok
Novomaliklinskiy maslozavod
Novomoskovsk Pipe Plant Interpipe
Novomoskovskiy trubniy zavod
Novoplast plant
Novosibirskiy Instrumentalniy Zavod
Novosibirskiy zavod plastmass Unis
Novo-ufimskiy neftepepepabativauschiy
zavod
NPO Slava
NTL Upakovka
Obuvnaya f-ka Independence
Obuvnaya Kompaniya Baofu
Obuvnaya kompaniya Hay Chzhen
Ochakovo, Group of Companies
Ofs Cvyazstroy-1 VOKK
OKB Kabelnoy Promishlennosti
Okerlund & Rauzing Kuban
OKS 01
Oktava, Tula
Olmas
Omsk-polimer
Omsky Kautchuk
Omsl Pipe Insulation Plant
Omya
Ops-Shilovo
Orelsibgazapparat
Orion
Orion Plastik
others
Oventrop
Ozmak plastik makina
Packaging Plant Tokk
Padanaplast
Paketti-Grupp
Patriaplast
Pera Plastik-Kuban
409.
410.
411.
412.
413.
414.
415.
416.
417.
418.
419.
420.
421.
422.
423.
424.
425.
426.
427.
428.
429.
430.
431.
432.
433.
434.
435.
436.
437.
438.
439.
440.
441.
442.
443.
444.
445.
446.
447.
448.
449.
450.
451.
452.
453.
454.
455.
456.
457.
458.
459.
460.
461.
462.
463.
464.
465.
466.
467.
468.
469.
470.
471.
472.
473.
474.
475.
476.
477.
478.
479.
480.
481.
482.
483.
484.
485.
486.
487.
488.
489.
490.
491.
492.
493.
494.
495.
Perint, St. Petersburg
Permgeokabel
Pervouralsky Novotrubny Plant
PET.RUS
Peterpipe
Petrohemija
Pharm-Plast
Piovan
Pipelife
Pivovarennaya kompaniya Baltika
PK Europlast
Pkf Betar
PKF DV Plast
PKF Himplast
PKF Linda
Pkf Plastprom
PKF Siluet
Plascoat
Plastbalt
Plastek UK
Plastik, Angarsk
Plastik, Dzerzhynsk
Plastik, Irkutsk
Plastik, Uzlovaya
Plastika Kritis
Plastika-Tumen
Plastikom, Group of Companies
Plastipak
Plastkom
Plastkompozit
Plastmet, Chelyabinsk
Plastosnastka
Plastotehnika
Plastupak
Platar
PO Baltenergomash
PO Krasniy Vostok-Solodovpivo
Podolskkabel
Polikont
Polimer Kemerovo
Polimer, Samara
Polimer, Uzlovaya
Polimerbit, Group of Companies
Polimeri Europa
Polimerkonteyner
Polimermash
Polimer-nknh
Polimer-Pak
Polimerstroy, Orenburg
Polimertara
Polimiz
Poliplast Lugansk
Poliplast Tyumen
Poliplastik, Group of Companies
Poliplast-K
Politar
Politar, Salavat
Politek PTK
Politek, Group of Companies
Polycom
Polycorp Kft
Polymer Complex
Polymer, Desnogorsk
Polymerbyt
Polymer-Compound
Polymir
PolyOne
Polypak, Zheleznogorsk
Polyram
Polywell Industrial
Premix OY
Presteel Oy
Procter&Gamble Novomoskovsk
Profine Rus
Profinters
Profline
Proizvoditel Paketov
Proizvodstvennaya firma Vestplast
Prokter end Gembl, Group of
Companies
Prom, Omsk
Promservice
Promstroykabel
Prysmain Cables
Pskovkabel
Pskov-polimer
Qapco
Qingdao Plastic Machinery
MARKET
R E P O R T
C O M P A N Y
496. Quanzhou Modern Furniture Enterprise
497. Queens Machinery
498. Ras Lanuf Oil, Libya
499. Regent-Stretch
507. Retal Trade
508. Retal, Group of Companies
509. Ribinskkabel
510. Rosendahl Maschinen
511. Rosti Verpackungen
512. RPR
513. Rubezhanskiy Pipe Plant
514. Ruian Senlang Shoes
515. Rushenk
516. Rusoyl-Moskva
517. Russkaya Nota
518. Russkoe pole
519. Ruvinil
520. Sabic
521. Sacmi Imola
522. Samara Cble Company
523. Samarkabel, Group of Companies
524. Samsung
525. Saranskkabel
526. Saratovskiy trubniy zavod
527. Schlumberger Technology
Corporation
528. Schoeller Arca Systems
529. Schutz GbmH
530. Sealed Air
531. Sealed Air
532. Sedon
533. Selena, Group of Companies
534. Selmers Technology
535. SET
536. Severnoe Siyanie
537. Severodonetsk Azot Association
538. Sevkabel
539. Sevkabel-Holding, Group of
Companies
540. Sevzapkabel, Group of
Companies
541. Shanghai Jwell Machinery
542. Shanguy Zongray
543. Sharq
544. Shchelkovo Metallurgical Works
545. Shengli Oil
546. Shenyang Heng Feng Shoes
Factory
547. Shenzhen QinpeiShoes
548. Sholler Arka Systems
549. Shurtansky Gas-Chemical Plant
550. Sibgazapparat
551. Sibirskaya industrialnaya
teplovaya izolyaciya
552. Sibkabel
553. Sibpromkomplekt
554. Sibur-Chimprom
555. Sibur-Neftechem
556. Sidel
557. Sidi Kerir Petrochemicals
558. Siemens
559. SIG Blowtec
560. SIG Corpoplast
561. Sikvist Klouzherz
562. Simi Engineering
563. Simplex
564. Sintez, St. Petersburg
565. SK Corporation
566. Skena plus
567. Sket
568. Slavich, Group of Companies
569. Slovnaft
570. SMC
571. SMI
572. Smolkabel
573. SMS Folientechnick
574. SNOS (Salavatnefteorgsyntez)
575. SOATE
576. Solnechnogorskiy z-d Evroplast
577. Soplar
578. Souz-Polimer, Group of
Companies
579. Sozidanie, Kaliningrad
580. Specialnie sistemi i tehnologii
581. SPK Roman
582. Stavrolen
583. Stavrovo Otomotiv Sistems
584. Steady Stream
17
500. Regionalniy Kredit Horlovo
501. Rehau
502. Reka Cables
503. Reliance Industries
585. Steel Flower
586. Stekloplastic
587. Stepnoy Leopard
588. Stirolplast
589. Stretch, St. Petersburg
590. Stroyplastpolymer
591. Stroypolimerprogress
592. Stroypolymer
593. Sudkabel
594. Suifenhe Kailai Economic
595. Sumitomo
596. Suominen Flexible Packaging
597. Suzdalskiy Molochniy Zavod
598. Suzhou Constab
599. Sverdlovskiy kombinat
hleboproduktov
600. Ta fu Uan
601. Taejin Machinery
602. TAIF
603. Talickie polimeri
604. Tatneft
605. Tatteploizolyaciya
606. Techne
607. Techno Coating Engineering
608. Technokom
609. Technopolymer-Plus
610. Tegola Roofing Products
611. Tehnopolimer, Kaliningrad
612. Tekhpolymer
613. Tema Nord
614. Teplostroyservis
615. Termafleks Izolyaciya+
616. Termoplast
617. Termoplastavtomat
618. Tetra Pak, Group of Companies
619. Thai Petrochemical
620. Ticona
621. Tiemme Raccorderie
622. Tiglon
623. Tiko-Plastic
624. Titan Group
625. Titan Petrokimia
626. Tmim
627. Tomskcable
628. Tomskiy zavod rezinovoy obuvi
629. Tomskneftechem
630. Tomskneftekhim
631. Tonar
632. Topol-Eco
633. Torzhokskaya obuvnya f-ka
634. Tosaf
635. Tosol-Sintez
636. Total Petrochemicals
637. Tozti-Plast, Group of Companies
638. Tria
639. Trioplast
640. Troester
641. Trosifol
642. Trubniy Plastikoviy Zavod Polimer
643. Truboplast-A
644. Tuboplast-Otradnoye
645. Tupperware
646. Tvel-T, Group of Companies
647. Tvel-Teploross
648. Tverskoy trubniy zavod
649. Tvertrubplast
650. TVK
651. Ube Industries
652. Ufaorgsyntez
653. Ufimkabel
654. Ukrplastik
655. Umit Makina
656. Uniloy Milacron
657. Unimilk
658. Union Crystal
659. Unipetrol
660. Uniplast
661. Unitpolimer
662. Unkomteh, Group of Companies
663. Unyka
664. Uponor
665. Uralcable
666. Uralplastik
667. Urals Pipe Works
504. Rempromoborudovanie
505. Renta XXI
506. Repsol
668.
669.
670.
671.
672.
673.
674.
675.
676.
677.
678.
679.
680.
681.
682.
683.
684.
685.
686.
687.
688.
689.
690.
691.
692.
693.
694.
695.
696.
697.
698.
699.
700.
701.
702.
703.
704.
705.
706.
707.
708.
709.
710.
711.
712.
713.
714.
715.
716.
717.
718.
719.
720.
721.
722.
723.
724.
725.
726.
727.
728.
729.
730.
Urola
USI Corporation
Uzhniy Trubniy Zavod
Vallourec&Mannesmann Tubes
Valsir
Valtec
Valtrompia Technic
VEM
Vetco Gray (Pte) Ltd
Veyner Plastik
Vimm Bill Dann, Group of
Companies
Vir Plast
Vismut
Vk-plast
Vladimirskoe moloko
Volgopromkomplekt
Volzhskiy Orgsintez
Volzhskiy trubniy zavod
Voronezh Plast
Voronezhtelekabel
Voskresenskie mineralnie
udobreniya
Vurnavskiy Zavod Smesevih
Preparatov
Vyazemskiy Zavod Sinteticheskih
Produktov
Vyksunsky Metallurgical Plant
W.R. Grace
Wafa Technologies
Wavin
Wavin-Rus
Wenzhou Huangjianiao
Westlake
West-Plast
Wilks
Windmoller & Holscher
Woodjin Selex
Yaroslavskiy kombinat molochnih
produktov
Yaroslavskiy Zavod Rezinovih
Tehnicheskih Izdeliy
Yelkenciler Makina
Young Sang Industrial
Youngin Engineering
Yu Sheng
Yug-Polymer M
Yugtrubplast Pant
Yuzhkabel
Zagorsk experimental plant of
plastic materials
Zavod Agrokabel
Zavod Beluzhkabel
Zavod Elkap
Zavod Energokabel
Zavod po izolyacii trub,
Timashevsk
Zavod polietilenovih trub
Zavod polimernih izdeliy, Kirov
Zavod polimernoy tari
zavod Santehkomplekt
Zavod Tarnykh Izdeliy
Z-d upakovochnih materialov
Zhangjiagang Beier Machinery
Zhangjiagang Fanchang
Machinery
Zhejiang Honghua Machinery
Zhejiang Jinhai Plastic Machinery
Zhillet, Group of Companies
Zi-mak
Zolotaya semechka, Group of
Companies
ZPI Alternativa
MARKET
R E P O R T
C O M P A N Y
METHODOLOGY
General Information on the Report
·
The Annual Reports have been framed so that you could get a maximum complete and
detailed picture after you have read it. We did our utmost to present the Report as an
annual market encyclopaedia.
·
Our reports can be used for the benefit of:
§ companies that are developing business plans for their projects on polymer
processing, and they need marketing data/forecast on feedstock supply and
potential sales of finished goods,
§ investment companies and banks that analyze potential investments into
processing,
§ converters that expand production,
§ producers/traders/suppliers, and any other companies that are going to enter
the market or to increase own market share within the next year.
·
Generally, apart from analysis of prices selected from our Price Reports, statistics on
production/exports/imports selected from our Monthly Reports, our Annual Reports
contain the following data:
Market development model is founded on
forecast till 2020
§ Statistics on consumption/domestic supply/import of a certain polymer
grade/certain producer by each processing sector
§ Rating of producers in each processing sector
§ Rating of producers’ feedstock grades in each processing sector
§ Detailed analysis of trends in each processing sector
§ Rating of converters (processing volumes, investments, transportation by rail,
proceeds)
§ Analysis of the market of monomers
§ Macroeconomic data, statistics on production in specific processing industries
and in construction
§ Detailed analysis of converters’ investment projects
§ Interpretation of the most important news and expert opinions over the course
of the year.
·
All data are presented in accordance with overall annual results. All values of the year
under discussion are compared with similar periods of the eight previous years.
Separately, you will find marketing forecast till 2020.
·
All diagrams and tables in the Appendixes are made up automatically. The
methodology includes unified processing of all fragmentary data that we use to
understand activities of each converter. Data from Annual Reports fully agree with
information presented in PlastGuide.
·
PlastGuide helps form any reference in оn-line mode by each converter mentioned in
this Annual Report. This is a unique software system that includes marketing data on
20 thousand companies operating in the CIS polymers market. An individual strong
aspect of PlastGuide is the set of credit ratings by each converter that allow assessing
not only general financial performance of a converter (on the basis of Altman scoring
model), as well as to understand advisability of giving commodity credits to such
converters.
·
To prepare this Annual Report, we used statistics provided by the Federal State
Statistics Service, State Customs Service, Russian Railways, Ministry for Economic
Development, Central Bank of the Russian Federation, as well as producers’ data,
18
Annual Report
MARKET
R E P O R T
C O M P A N Y
expert opinions, information of world and Russian analytical companies, and own
Market Report Company’s data.
Classification of Products
·
The basic classification of products analyzed in the Report included the world generally
accepted classification of PE grades:
§ LDPE – low-density polyethylene (high pressure), density is up to 0.94g/cm3;
§ HDPE – high-density polyethylene (low pressure), density is more than
0.94g/cm3;
§ LLDPEП – linear low-density polyethylene (high pressure), density is up to
0.94g/см3;
§ EVA – ethylene copolymer with vinyl acetate;
§ Other ethylene copolymers;
§ 0ther (masterbatches on the basis of PE-matrix, additives, etc.).
·
We adhered to general Foreign Trade Codes just partially, since actual imports of PE
grades do not correspond to commodity items indicated in importers in customs
declarations. Use of just Foreign Trade Codes could have led to serious distortions in
research results. Therefore, we applied our own, more precise correlation of sold
products with PE grades by producers’ brands.
·
For example, Hipten 22003 of Petrohemija is LDPE, though buyers may be inaccurate
and indicate it as HDPE or even LLDPE.
Data Directories
·
The Annual Report contains data processed in general reference guides:
§ 15 principal (directly affect consumption volumes), as well as five auxiliary
(affect consumption volumes indirectly), polymer processing technologies;
§ 64 polymer processing sectors – from BOPS-containers to fittings;
·
The general data tree in all Annual Reports has a three-level structure: Processing
Technology, Processing Sector and Type of Finished Goods.
Customs Duties
Foreign Trade Code
19
Annual Report
Import duty, %
3901209000
6,5%
3901909000
0%
3901101000
0%
3901109000
6,5%
3901209009
6,5%
3901300000
6,5%
3901903000
0%
MARKET
R E P O R T
C O M P A N Y
12 benefits of our Annual Report
· The Report includes general data on PE imports from Belarus. The common error of
many researchers is that overall PE consumption in Russia is often calculated without
LDPE imports from Belarus. Indeed, Russian customs authorities do not register importsexports of PE from/to Belarus recording them as domestic transportation.
·
If you take statistics of production of finished goods made of PE as a basis, then,
unfortunately, your assessments of individual processing sectors are going to be incorrect
in principle. The Federal State Statistics Service of the Russian Federation does not take
into account production of PE films by many large producers. There is a similar situation
with production of polymer pipes. The Federal State Statistics Service takes into account
processing volumes of only 128 film producers and 42 polymer pipes producers. At the
same time, the Federal State Statistics Service does not take account of production
figures of the largest producers (particularly, there are no data on production of PE pipes
by Eurotrubplast Holding in 2007; official statistics do not provide any information on
production of packaging at P&G or WBD, either; and there is a long list of such
examples). The situation with official statistics on the injection molding market is simply
catastrophic. They record output volumes of only one tenth of producers. Taking into
To analyse business of every converter use
PlastGuide
account the aforesaid, our data on PE consumption by processing sectors essentially
differ from all those published on the market.
· Indeed, in accordance with commonly used reports, about 24% in the structure of overall
PE supply belong to the packaging sector, 22% refer to the sector of films, and nearly
21% are covered by the mysterious sector of cultural and house hold goods. Can this
structure be used to define PE processing technologies applied in the market? No,
inasmuch as films can equally be includedin to the sector “Packaging and Wrapping
Materials” as well as into the sector “Cultural and Household Goods”.Thesame,
forexample, refers to molded boxes or caps for PET bottles or to cosmetic bottles made
with the help of EBM technology. Can this classification be used to tell PE suppliers which
grades and for which sectors (or, at least, with which MFR) should be offered to the
market?
No,
since
according
to
the
old
classification
nearly
700
KT
of
consumedpolyethylene cannot be unambiguously referred to either one or another PE
processing technology generally accepted in the world..
· Not to delude players in the Russian polyethylene market, we collected detailed statistics
on PE supplies by all producers, operating in the Russian market, by each PE grade. We
analyzed sales of all 976 PE grades available in the Russian market over the course of
the recent nine years. If data on imported grades can theoretically be collected, then the
product mix of Russian polyethylene producers can be found only in our Report.
· Having collected summarized data on sales of specific PE grades, we were able to
assess PE consumption volumes in each processing sector with greater accuracy. The
data we obtained on production of films in Russia differ nearly two times from official
statistics.
· Our estimations of the PE pipes market turned out to be higher than had been considered
to be the case before our Report. Indeed, very often analysts of the pipe market
didnottakeaccountoftheundyed 273-83 HDPE grade produced in Kazan and Budennovsk,
since in accordance with operating State Standards this grade cannot be used in
production of water-, gas- and heat supply pipes at all. However, according to our data, all
the same Russian producers use this grade (about 50 kt in overall consumption): they
other dye it by means of masterbatches, or add it as blends, or use it as an inner layer in
multi-layer pipes.
· We studied PE traders’ sales and focused on end polyethylene converters. For that we
used more than a dozen of different sources of information, including detailed statistics on
20
Annual Report
MARKET
R E P O R T
C O M P A N Y
foreign-economic activity, production, financial indicators and inland transportation in the
Russian Federation.
· Major difficulties arose when we analyzed supply of equipment to each PE processing
sector. It was especially difficult to distribute molding machines since they can also be
used to process PP, PVC, HIPS, GPPS, ABS, etc. Distributing molding machines by
polymers, we adhered to several criteria: converter’s sphere of business, brand of a
molding machine and producers’ application instructions. As a result, each molding
machine was identified to each producer related to either one or another processing
sector, which, in its turn, was related to either one or another PE grade. Separately, we
made up the rating of the most significant investments made by converters. Accordingly,
dynamics of capita linvestments into equipment demonstrate possibilities of further growth
of each PE processing sector in the Russian Federation..
·
Each processing sector contains ratings of converters, made up on the basis of our own
assessments of PE consumption, as well as ratings ofsales of each PE grade by each
technology, and, when needed, by processing sectors. That was done to define, which PE
grades are in great demand in the Russian market in each business segment today, as
well as to understand how to form your grade mix in each segment in the most efficient
way.
· Reasoning from data on investments into PE processing, as well as using statistics on
inland transportation in Russia, we made up a complex picture of PE processing
development in eachregion of the Russian Federation.
· We have also described general PE market development trends both in the world and in
each region using assessments of the leading world analytical companies such as CMAI,
Nexant and Townsend. Furthermore, weanalyzed price dynamics over the course of
2007-2015, using data of ICIS, as well as our own data from Price Reports.
· One of the results of the unbiased analysis is our own forecast of potential projects on
expansion of PE production capacities in Russia till 2015, as well as assessment of
projects that are most likely to remain on paper.
21
Annual Report
MARKET
R E P O R T
C O M P A N Y
Processing Technology
We analyzed processing technology for which each polyethylene grade is meant. We
included the following PE processing technologies that are generally accepted in the world:
· Film Extrusion (Blown, Cast). By types, films are divided into general-purpose films,
hothouse and dairy films. As a rule, with MFI at about 2 (hereinafter on default MFI is
indicated at 190 °C/2.16 kg). As well, multi-layer (MFI from 1.5 up to 4), shrinkable (MFI
from 0.2 up to 0.7) and stretch films on the basis of LLDPE (MFI from 1 up to 2).
· Injection Molding. Depending on finished goods (boxes, caps for PET bottles, etc.),
they use grades MFI from 6 up to 120. The main volumes of PE injection molding
grades belong to MFI 10-12.
· Extrusion Blow Molding (EBM). In our Report we tried to divide processed PE products
into finished goods with the capacity up to 0.5 l (flasks, bottles for cosmetic industry
and for dairy products); for them they use brands with MFI 0.3-0.8, as well as into
large-capacity EBM goods (canisters for oils, barrels, fuel tanks) – brands with MFI 0.70.9 are good for them.
· Pipe Extrusion. As a rule, this HDPE processing technology refers to brands dyed in
black, grey or orange colours with MFI 0.2-0.6. Among pipe grades we tried to mark out
separately PE 63, PE 80 and PE 100.
· Cable Extrusion. There are special cable brands for this technology (as a rule, in the
form of compounds on the basis of LDPE) with MFI about 2.
· Extrusion Coating (Pipe, Packaging). In our Report, we marked out brands (as a rule,
LDPE, MDPE) for extrusion coating of steel pipes with big diameters (MFI from 0.4 up
to 0.8) or for multi-layer paper packaging (MFI from 3 up to 10).
· The Report contains information on grades (these are LDPE and MDPE, as a rule)
intended for extrusion coating of big-diameter pipes (MFI from 0.4 to 0.8) or multi-layer
paper packaging (MFI from 3 to 10).
· Other. We separately singled out production of tubes made of HDPE, as well as
injection molding goods (soles for footwear) made of EVA.
The accurate identification of consumption by markets was impeded by the fact that
manufacturers from the CIS have brands that can be used in several markets
simultaneously. For instance, the 15803-020 LDPE grade is used by processors in
absolutely different processing sectors (from film extrusion to blends in injection molding and
ЕВМ). Therefore, the distribution, for example, of this brand, which is manufactured by
Kazanorgsyntez, Polymir, Tomskneftechem, Angarks Polymer Plant, SNOS and EthylenePolyethylene (Sumgait), was carried out on the basis of experts’ assessments.
Technology implies the primary polymer processing method, which directly affects its
consumption volumes. For example, molding, cutting of bags or re-granulation could also be
considered a polymer processing technology; however, they affect polymer consumption
volumes indirectly; therefore, we did not include them into general analysis of production
capacities. Our conclusions, for example, as to PE bags cutting were based production
capacities, the so-called primary PE processing, i.e. in accordance with the film extrusion
technology.
22
Annual Report
MARKET
R E P O R T
C O M P A N Y
Processing Sector
Processing sector is needed for more detailed analysis of consumption in a specific polymer
processing technology. As a rule, processing sector is a reference guide subordinate to
processing technology guide. We use 18 processing sectors to analyze the PE market.
Blow Molding
· containers <1L
· containers <= 2L
· containers <= 10L
· containers =>10L
· other containers
Cable Extrusion
· cable shell
Injection Molding
· footwear
· other
· packaging and wrapping materials
· fittings
Extrusion Coating
· steel pipes
· packaging
Film Extrusion
· blown
· cast
Pipe Extrusion
· corrugated pipes
· rigid pipes
· polymer pipes
· hoses
23
Annual Report
MARKET
R E P O R T
C O M P A N Y
Types of Finished Goods
As a rule, detailed elaboration by sectors is not enough to understand trends in polymers
processing. Therefore, we apply a subordinate guide – types of finished goods. Their total
number is 49, and the list is as follows:
· automobile chemistry
· containers
· household chemical goods/cosmetics/pharmaceutics
· buckets
· water
· pressure-water
· pressure-gas
· goods for pets
· construction
· heat supply
· drainage
· rigid pipes
· cable
· sewerage
· channels
· stationery
· glue, additives
· caps for PET bottles
· cardboard lamination
· tape
· metal-plastic
· bags
· bags/inserts
· multi-layer
· dairy
· no-pressure systems
· footwear
· garbage bags
· retail bags
· pallets
· beer
· food
· footwear soles
· coating
· corks/covers
· other
· reservoirs, tanks
· scotch
· stretch
· hothouse
· shrinkable
· molded containers
· household goods
· thin-walled packaging
· big-diameter pipes
· office files
· fittings
· hoses
· boxes
24
Annual Report
MARKET
R E P O R T
C O M P A N Y
…a part of the report …
2. The Russian market of polyethylene
2.1 The current market situation
.
· The Russian polyethylene market showed no growth in demand at the year-end 2015,
with demand for LDPE declining. Once booming LDPE market saw minimum demand
growth. Russian manufactures managed to increase PP output last year, however, the
LDPE segment operates on the limit of its capacity. Sizeable devaluation of the rouble
pushed the exports up. In 2015, PP consumption was estimated at 1783.8 ths tonnes,
matching the figure of 2014.
· At the year-end 2015, the estimated LDPE consumption in the Russian market made
576 ths tonnes, up 1% year-on-year. Russian producers succeeded in increasing the
output by 1% only. The LDPE imports fell by 14%, with the decline caused by the
devaluation of the rouble and shrinking demand in some consumption sectors.
· In January - December 2015, LDPE consumption was estimated at 971.1 ths tonnes,
matching the figure in 2014. The output went up by 11%, which fact is mostly
accounted for by stable operation of Stavrolen despite the reduction of LDPE share in
Nizhnekamskneftekhim's portfolio.
· Weaker demand in key consumption sectors and rouble devaluation contributed to a
drop in LDPE imports by 36%. Among the most affected imports were pipes (a 50%
imports reduction to 41.3 ths tonnes) and extrusion (a 51% imports reduction to 26 ths
tonnes).
· In 2015, the LDPE market grew but slightly, gaining a humble 1% to make a total of
236.7 ths tonnes. Nizhnekamskneftekhim substantially increased LDPE production,
forcing Middle Eastern producers to squeeze. In 2016, the company plans to increase
their LDPE share of their portfolio even further.
· Demand for film LLDPE went up by 1% to 208 ths tonnes, while that in the rotational
moulding sector dropped by 15% to 9 ths tonnes. Imports of LDPE for cable insulation
was up by 16% to make a total of 3.1 ths tonnes. Demand for PE for paper lamination
grew to 8.2 ths tonnes.
· In 2015, the output of PE in Russia increased by 9% year-on-year and made over
1.591 ths tonnes. The output of linear polyethylene (LLDPE) enjoyed the most
significant growth.
· At year-end 2015, the production of linear polyethylene exceeded 46 ths. tonnes,
while a year earlier this figure made 16.2 ths. tonnes. Nizhnekamskneftekhim remains
the only LDPE producer in Russia,
· In 2015, investments in polyethylene (PE) processing dropped by 30% and made
USD40 mln, with films and packaging accounting for the most of the investment cuts.
· Record high investments in PE processing in the last nine years were reported in
2013, followed by a substantial drop in investments by Russian companies. According
to the MRC data, a total of 700 complete equipment sets for PE processing were
imported for a total amount of USD184 mln, while the imports of the previous year was
900 complete production lines worth USD264 mln. Producers of films and packaging
by extrusion blow moulding, were the ones to cut the investments most.
· At the year-end 2015, 75 complete lines for making PE films were imported for a total
amount of USD22 mln, while the imports of the previous year were 196 complete uits
25
Annual Report
MARKET
R E P O R T
C O M P A N Y
worth USD56.5 mln. Such a significant drop in investments in production of films was
mainly a result of a sharp growth of equipment costs due to rouble devaluation and
increased borrowing costs. Some companies simply put their production expansion
plans on hold.
· Saturation of certain segments, in particular, that of stretch films, also contributed to
the slump in purchases of PE film production equipment. Demand for this type of films
was booming over the last seven years, but as early as the at the beginning of the last
year this market entered its saturation phase.
· Among the companies that last year imported lines for production of PE films, one
should note the following: Vikona-SP, Aleko-Polimery, Atlantis-Pak, Foliopak, Polimer
(Desnogorsk) and others.
· Last year, investments in equipment for production of PE pipes went down to USD15
mln, while the imports totalled 46 complete production lines. In 2014, companies spent
about USD22.5 mln to buy that type of equipment, with 53 complete production lines
supplied. Among the companies that pursued expansion of their production of PE
pipes, one should note the following: Polyplastic, Rosturplast, Water-Supply and
Sewage Systems, Uponor Rus, Tekhstroy and others.
· In 2015, 41 complete production lines for production of PE packaging by extrusion
blow moulding were imported for a total amount of USD14 mln, ////USD while a year
earlier, this figure was 56 units worth USD28 mln. Among other factors, the reduction
of investments in this segment of PE processing is a result of competition from PET
packaging (actively pushing PE packaging in household chemicals, dairy, auto
chemicals sectors). Among the companies that opted for expansion of their production
capacity last year, one should note the following: Serioplast, Delfin Distribution, Alpla,
Stupinsky Chemical Factory and others.
26
Annual Report
MARKET
R E P O R T
C O M P A N Y
Polyethylene in Russia – 2016
PE. General market indicators, MT
2007
2008
2009
2010
2011
2012
2013
2014
2015
AAGR,
5 y, %
2016
estimation
2017
forecast
2018
forecast
2019
forecast
2020
forecast
46%
1 766 872
1 766 872
1 783 503
1 827 446
1 995 020
-
8%
0%
1%
2%
9%
31%
1 462 319
1 487 120
1 503 025
1 524 082
1 656 428
Indicator
1 113 000
1 113 000
1 121 400
1 121 400
1 161 400
1 484 500
1 484 500
1 641 512
Growth, %
Production capacities
-
-
1%
-
4%
28%
-
11%
Production
1 010 308
1 034 201
1 066 324
1 048 834
1 074 641
1 245 138
1 317 432
1 398 110
Growth, %
-
2%
3%
-2%
2%
-
5%
2%
1%
1%
9%
352 216
362 270
248 601
140 409
161 606
210 003
197 652
426 926
72%
360 948
349 341
354 039
324 771
352 002
-
3%
-31%
-43%
15%
30%
-6%
116%
-
-15%
-3%
1%
-8%
8%
62 351
117 583
137 470
181 590
342 090
448 878
385 976
331 418
141%
382 137
455 321
544 378
581 974
598 077
-
89%
17%
32%
88%
31%
-14%
-14%
-
15%
19%
20%
7%
3%
758 928
819 881
988 544
1 123 968
1 293 920
1 523 143
1 541 450
1 325 835
34%
1 524 419
1 624 906
1 702 006
1 790 058
1 906 151
-
10%
21%
14%
15%
18%
1%
-14%
-
12%
7%
6%
5%
7%
Export
Growth, %
Import
Growth, %
Estimated
consumption **
Growth, %
Please,16%
see the full version
6% of the Report
6%
Utilization of production
capacities, %
91
93
95
94
93
84
89
85
-11%
85
88
92
96
98
Exports to production,%
35
35
23
14
15
17
15
31
35%
27
27
27
27
27
Imports to
consumption,%
9
15
14
17
27
30
26
25
79%
26
28
28
28
28
Supply from Belarus
38 486
30 367
33 351
33 954
38 796
39 130
35 695
23 237
-30%
25 561
26 328
27 381
27 928
29 045
-
-21%
10%
2%
14%
1%
-9%
-35%
-
10%
3%
4%
2%
4%
Growth, %
MARKET
R E P O R T
C O M P A N Y
Source: MRC
* taking into account swing technology in Kazan and Nizhnekamskneftekhim
** taking into account LDPE supply from Belarus
40
Annual Report
MARKET
R E P O R T
C O M P A N Y
PE consumption dynamics by technologies, MT
Technology
2007
2008
2009
2010
2011
2012
2013
2014
2015
AAGR, 5 y,
%
2016
estimatio
n
2017
forecast
2018
forecast
2019
forecast
2020
forecast
film extrusion
392 046
396 729
488 168
569 727
633 497
722 681
772 362
676 048
38%
785 346
836 800
871 435
907 074
967 779
1 236 628
-
1%
23%
17%
11%
14%
7%
-12%
-
16%
7%
4%
4%
7%
28%
109 527
126 471
163 688
174 126
236 246
312 824
341 309
231 760
287 890
316 679
342 013
345 433
376 522
508 305
-
15%
29%
6%
36%
32%
9%
-32%
-
24%
10%
8%
1%
9%
35%
66 576
98 368
112 756
134 285
147 444
147 560
136 554
142 709
27%
147 121
150 091
154 541
156 124
160 838
209 046
-
48%
15%
19%
10%
0%
-7%
5%
-
3%
2%
3%
1%
3%
30%
24 958
39 113
38 565
38 370
61 787
89 281
57 014
85 882
123%
87 574
90 095
94 776
98 251
103 607
131 773
-
57%
-1%
-1%
61%
44%
-36%
51%
-
2%
3%
5%
4%
5%
27%
74 581
81 492
90 061
92 713
96 099
110 987
111 800
81 328
-10%
95 851
104 573
106 860
148 086
154 378
181 446
-
9%
11%
3%
4%
15%
1%
-27%
-
18%
9%
2%
39%
4%
18%
71 336
57 972
70 771
87 281
82 732
84 018
77 321
72 363
2%
68 372
72 412
74 921
76 659
80 844
91 292
-
-19%
22%
23%
-5%
2%
-8%
-6%
-
-6%
6%
3%
2%
5%
13%
19 904
19 735
24 534
27 467
36 115
55 792
45 090
35 746
46%
26 298
27 303
29 181
29 510
31 848
35 765
-
-1%
24%
12%
31%
54%
-19%
-21%
-
-26%
4%
7%
1%
8%
12%
758 928
819 881
988 544
1 123 968
1 293 920
1 523 143
1 541 450
1 325 835
34%
1 524 419
1 624 906
1 702 006
1 790 058
1 906 151
2 428 276
-
8%
21%
14%
15%
18%
1%
-14%
-
12%
7%
6%
5%
7%
Growth, %
pipe extrusion
Growth, %
blown molding
Growth, %
extrusion coating
Growth, %
cabel extrusion
Growth, %
IM
Growth, %
others
Growth, %
Total
Growth, %
Please, see the full version of the42%
Report
MARKET
R E P O R T
28%
C O M P A N Y
Source: MRC
41
Annual Report
MARKET
R E P O R T
C O M P A N Y
Dynamics of investments into PE processing by technologies. Number of complete lines
Technology
2007
2008
2009
IM
509
547
573
film extrusion
300
320
blown molding
85
113
pipe extrusion
46
cabel extrusion
1
2010
2011
2012
2013
2014
2015
AAGR, 5 y,
%
689 Please, see572
597
the full version of
the Report
902
1 340
382
-11%
200
243
308
330
309
315
185
-5%
104
90
66
92
102
125
52
-10%
53
50
73
81
130
78
152
51
-7%
6
5
3
3
7
16
57
26
54%
extrusion coating
3
1
4
2
3
5
3
3
1
-13%
others
13
13
13
26
24
12
23
-
4
-31%
MARKET
Total
957
1 053
949
1 126
1 057
1 173
1 433
1 992
701
R E P O R T
C O M P A N Y
-9%
Source: MRC
42
Annual Report
MARKET
R E P O R T
C O M P A N Y
HDPE suppliers, MT
Manufacturer
2007
2008
2009
2010
2011
2012
2013
2014
2015
AAGR, 5
y, %
1
Kazanorgsyntez
150 512
169 464
134 108
154 348
153 724
180 515
219 624
270 758
259 052
11%
9%
2
Stavrolen
144 197
103 403
167 098
224 736
285 000
250 787
289 753
290 445
221 787
0%
-13%
3
Nizhnekamskneftehim
4
Borealis
5
Korea Petrochemical
6
Shurtansky GCP
7
Ineos Polyolefins
8
LyondellBasell
9
Total Petrochemicals
10
Daelim
11
№
Please, -see the full version
of the Report
AAGR, 2
y, %
-
-
-
-
-
80 364
-
-
5 190
10 017
27 997
32 507
32 552
47 159
61 093
36 103
61 325
14%
0%
5
46
-
4 308
5 577
18 826
36 225
64 960
30 777
48%
-8%
-
-
3 772
3 661
24 677
47 921
37 016
20 879
17 985
37%
-30%
94
1 694
4 152
7 257
7 546
17 515
23 719
21 324
13 923
14%
-23%
51
809
418
1 566
4 802
14 482
23 937
19 223
9 960
45%
-35%
4 309
5 262
1 204
7 593
8 466
12 915
13 276
5 917
8 985
3%
-18%
17
58
899
297
2 199
9 385
25 200
18 222
7 123
89%
-47%
Sabic
46
77
413
173
343
2 266
2 506
308
4 357
91%
32%
12
TVK
45
325
869
1 119
2 337
9 112
7 470
3 727
3 795
28%
-29%
13
LG Chem
300
2 790
7 029
2 957
3 183
5 145
7 447
5 875
2 902
0%
-38%
14
Unipetrol
3
793
2 979
3 566
4 569
3 437
2 158
4 138
2 223
-9%
1%
15
Samsung Total
18
171
230
761
1 739
2 645
2 933
5 042
2 163
23%
-14%
16
Chevron Phillips
-
-
-
-
-
-
1 542
3 826
2 159
-
18%
17
Dow
149
216
184
2 456
441
6 591
7 328
1 303
2 035
-4%
-47%
18
Honam Petrochemical
635
151
1 688
225
423
1 087
1 888
1 873
1 259
41%
-18%
19
Thai Petrochemical
-60%
20
Exxon Mobil
21
-
-
-
-
-
-
372
5 460
1 112
876
-
19
59
867
308
201
352
704
761
642
16%
-4%
others
8 453
4 473
15 227
16 062
16 586
30 628
39 248
26 423
3 755
-25%
-69%
Total
314 045
299 806
369 131
463 901
554 366
661 139
808 526
802 219
737 446
10%
MARKET
R E P O R T
C O M P A N Y
-4%
Source: MRC
43
Annual Report
MARKET
R E P O R T
C O M P A N Y
Film extrusion: PE supply analysis, MT
2007
2008
2009
2010
2011
2012
2013
301 185
487 205
630 545
779 705
987 785
-
62%
29%
24%
27%
23%
19%
351 490
368 512
346 398
439 318
509 029
525 062
593 314
2014
2015
AAGR, 5 y,
%
AAGR, 2 y,
%
1 622 332
1 679 382
17%
8%
12%
4%
-
-
652 815
567 897
5%
-2%
Indicator
processing capacities
Growth, %
domestic supply
Growth, %
Import
Growth, %
218 936
445 007
Please, see the 1full
version of the1Report
-
5%
-6%
27%
16%
3%
13%
10%
-13%
-
-
20 745
23 534
50 331
48 850
60 698
108 435
129 366
119 547
108 151
17%
-9%
-
13%
114%
-3%
24%
79%
19%
-8%
-10%
-
-
372 236
392 046
396 729
488 168
569 727
633 497
722 681
772 362
676 048
7%
-3%
Growth, %
-
5%
1%
23%
17%
11%
14%
7%
-12%
-
Imports to consumption,%
6
6
13
10
11
17
18
15
16
10%
Estimated consumption
MARKET R E P O R T
C O M P A N Y
-5%
Source: MRC
44
Annual Report
MARKET
R E P O R T
C O M P A N Y
Film extrusion. Blown films: PE grades rating, MT
2007
2008
2009
2010
2011
2012
2013
2014
2015
AAGR, 5
y, %
AAGR, 2
y, %
№
grade/Manufacturer
1
293-285Д/Kazanorgsyntez
5 139
5 518
11 654
16 515
23 968
18 481
21 276
48 413
65 759
32%
76%
2
10803-020/Kazanorgsyntez
37 534
43 224
34 758
42 934
32 615
47 357
49 241
55 487
45 206
1%
-4%
3
10803-020/Ufaorgsyntez
36 202
43 107
38 729
41 192
44 448
44 141
48 640
46 427
44 801
2%
-4%
4
15803-020/Ufaorgsyntez
10 637
16 553
15 296
see
Report
17 391Please,20
219the full version
18 010 of the 19
661
18 531
41 376
19%
45%
5
15813-020/Kazanorgsyntez
20 695
34 884
42 704
40 862
33 216
22 712
31 111
36 618
39 287
-1%
12%
6
10803-020/Angarsk Polymers Plant
27 265
30 981
24 519
33 486
53 017
57 449
72 040
56 353
36 750
2%
-29%
7
15803-020/SNOS
29 015
29 207
24 583
29 286
35 640
32 622
31 758
33 992
26 326
-2%
-9%
8
80Б-285Д/Kazanorgsyntez
-
-
-
-
-
-
13 793
13 404
15 493
-
6%
9
15803-020/Polymir
25 587
19 792
15 917
17 995
17 956
20 735
20 831
19 251
12 644
-7%
-22%
10
15803-020/Tomskneftechem
21 860
31 098
56 407
79 547
90 356
103 642
112 218
94 394
11 836
-32%
-68%
11
ПЭ2НТ18-11/Kazanorgsyntez
-
-
-
-
-
331
2 171
11 372
7 809
-
90%
12
10803-020/Polymir
10 165
8 507
6 397
7 004
6 791
8 762
8 838
9 009
5 825
-4%
-19%
13
15803-020/Sevilen
5 263
6 101
7 285
7 972
7 581
7 637
6 419
6 466
4 153
-12%
-20%
14
Exceed 1018EB/Exxon Mobil
153
663
961
1 558
1 286
3 929
4 197
3 358
3 667
19%
-7%
15
Borstar FB2310/Borealis
-
3
19
11
107
820
1 526
1 902
2 805
203%
36%
16
F-0320/Shurtansky GCP
-
-
-
-
-
-
-
1 800
2 700
-
-
17
Dowlex NG 5056.01G/Dow
-
-
145
103
207
1 048
718
1 907
2 469
89%
85%
18
F-Y346-A/Shurtansky GCP
-
-
3 522
1 272
1 050
3 795
4 801
1 830
2 450
14%
-29%
19
Exceed 1018CA/Exxon Mobil
-
220
501
946
1 251
1 835
2 471
3 137
2 377
20%
-2%
20
F-0120/Shurtansky GCP
-
-
-
-
150
1 450
2 170
1 140
2 310
21
others
141 829
118 726
110 008
144 004
188 637
215 497
243 218
253 260
47 030
-20%
-56%
-
Total
371 346
388 582
393 405
482 076
558 494
610 252
697 098
718 053
423 072
-3%
-22%
-MARKET3%
R E P O R T
C O M P A N Y
Source: MRC
45
Annual Report
MARKET
R E P O R T
C O M P A N Y
Film extrusion. Multi-layer fillms: Top-20 converters in terms of investments into equipment. Cost of production line, USD thous.
2007
2008
2009
2010
2011
2012
2013
2014
2015
Total
Share
-
-
-
-
-
-
7 566
6 180
13 746
14,9%
№
Сonverter
1
Lava, Group
-
2
Polimer, Desnogorsk, Group
-
19
-
206
-
7 734
-
3 473
-
11 432
12,4%
3
Em-Plast
-
520
-
-
1 157
543
1 990
3 827
2 162
10 199
11,0%
4
Paketti-Grupp
-
-
-
-
-
-
-
4 391
-
4 391
4,8%
5
Uralplastik, Group
-
-
-
-
2 066
-
-
-
1 655
3 721
4,0%
6
Slavich, Group
-
1 619
-
-
2 005
-
-
-
-
3 623
3,9%
7
PKF Siluet, Group
-
-
-
-
1 063
-
-
2 331
-
3 393
3,7%
8
Souz-Polimer, Group
-
-
-
-
-
-
-
2 974
-
2 974
3,2%
9
Plastik, Dzerzhynsk
-
-
-
-
935
-
878
-
-
1 813
2,0%
10
Tiko-Plastic
-
-
-
-
-
-
1 802
-
-
1 802
2,0%
11
Polimer, Samara
-
-
-
-
-
-
-
-
1 792
1 792
1,9%
12
Artplast-T
-
-
-
-
-
-
-
1 628
-
1 628
1,8%
13
Multiflex
-
-
1 119
-
-
-
-
-
-
1 119
1,2%
14
Polimerbit, Group
-
-
-
-
911
-
-
-
-
911
1,0%
15
Himpek, Group
-
-
734
6
-
-
-
-
-
740
0,8%
16
Vismut
-
-
-
-
-
499
-
-
-
499
0,5%
17
Dar
-
-
-
-
-
-
490
-
-
490
0,5%
18
Sedon, Group
-
-
-
-
-
-
427
-
-
427
0,5%
19
Sild Eyr, Group
-
-
-
-
311
-
-
-
-
311
20
Zagorsk experimental plant of plastic materials
-
-
-
-
-
241
-
-
-
241
21
others
695
889
695
2 192
1 155
6 094
4 098
3 120
8 116
27 054
29,3%
-
Total
695
3 047
2 549
2 405
9 603
15 111
9 684
29 310
19 905
92 308
100,0%
Please, see the full version of the Report
0,3%
MARKET0,3%
R E P O R T
C O M P A N Y
Source: MRC
46
Annual Report
MARKET
R E P O R T
C O M P A N Y
Blown molding: TOP-20 Equipment suppliers. Number of complete lines
2007
2008
2009
2010
2011
2012
2013
2014
2015
Total
Share
Equipment suppliers
Magic MP
2
12
9
8
5
9
4
2
-
51
6,4%
Zhejiang Honghua Machinery
1
10
2
3
6
8
5
-
-
35
4,4%
Bekum
5
10
2
2
2
-
3
4
-
28
3,5%
SMC
-
-
1
5
8
6
4
4
-
28
3,5%
SIG Blowtec
5
10
5
2
2
1
1
-
-
26
3,2%
IMG Plastec
-
1
14
7
-
2
2
-
-
26
3,2%
Automa
2
3
7
4
1
-
3
2
-
22
2,7%
Blasautomat
3
5
6
4
-
1
3
-
-
22
2,7%
Demak Plastik Makina
-
1
-
3
1
2
7
2
1
17
2,1%
Dae Chang Machinery
-
3
5
3
5
-
-
1
-
17
2,1%
Kai Mei Plastic Machinery
2
4
2
3
-
3
-
2
-
16
2,0%
Huasheng Machinery
-
1
-
2
6
5
1
-
-
15
1,9%
Uniloy Milacron
-
-
1
3
2
-
8
-
-
14
1,7%
Yelkenciler Makina
6
2
1
-
-
1
2
1
-
13
1,6%
Umit Makina
-
-
-
-
2
-
6
5
-
13
1,6%
Melitopolprodmash
7
2
2
-
-
-
1
-
-
12
1,5%
ChodosChodov
5
1
1
-
-
2
2
-
-
11
1,4%
Polimermash
-
-
-
-
-
-
-
10
-
10
1,2%
Ozkan Plastik
1
-
4
4
-
-
-
-
-
9
1,1%
Soplar
1
2
1
2
1
1
1
-
-
9
1,1%
others
45
46
41
35
25
51
49
91
25
408
50,9%
Total
85
113
104
90
66
92
102
124
26
MARKET
802
R E P O R T
C O M P A N Y
100,0%
Source: MRC
47
Annual Report
MARKET
R E P O R T
C O M P A N Y
PE production by producers in the previous year, MT
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
Total
Share
49 081
43 703
46 684
47 008
58 074
50 434
38 017
29 676
52 575
55 657
574 539
41,1%
№
Manufacturer
1
Kazanorgsyntez
55 320
48 311
2
Stavrolen
26 902
23 571
2 459
-
14 290
25 362
26 841
25 976
27 021
27 913
26 484
21 031
247 851
17,7%
3
Tomskneftechem
22 445
20 579
22 104
21 050
22 882
20 349
15 506
12 620
22 299
21 674
20 695
24 017
246 221
17,6%
4
Nizhnekamskneftehim
-
6 055
12 739
6 516
17 499
9 266
11 988
12 556
8 026
17 778
10 301
12 044
124 768
8,9%
5
Ufaorgsyntez
6 859
7 376
8 871
7 526
6 690
6 685
6 958
7 538
7 974
7 229
7 609
7 292
88 607
6,3%
6
4 500
3 600
4 350
4 300
5 690
5 330
5 400
5 300
2 800
5 630
5 609
5 591
58 100
4,2%
7
SNOS
3 290
3 380
3 874
3 355
3 894
3 695
3 945
3 790
554
3 812
3 545
3 825
40 959
2,9%
8
Sevilen
822
1 725
1 835
1 767
1 797
1 327
1 680
1 453
187
1 528
1 421
1 523
17 065
-
Total
120 139
114 598
105 313
88 217
119 426
119 023
130 393
119 666
106 877
115 240
128 238
130 980
1 398 110
MARKET
R E P O R T
1,2%
100,0%
C O M P A N Y
Source: MRC
48
Annual Report
MARKET
R E P O R T
C O M P A N Y
PE producers rating, MT
2009
2010
2011
2012
2013
2014
2015
AAGR, 5
y, %
AAGR,
2 y, %
№
Manufacturer
1
Kazanorgsyntez
262 531
311 813
292 437
326 409
370 634
459 988
432 403
7%
8%
2
Stavrolen
167 098
224 736
285 000
250 787
289 753
290 445
221 787
0%
-13%
3
Nizhnekamskneftehim
-
-
-
-
-
-
91 986
-
-
4
Borealis
36 460
41 789
45 130
88 147
16%
-5%
5
Ufaorgsyntez
78 081
77 913
86 507
82 197
90 550
86 446
86 621
2%
-2%
6
TOMSKNEFTECHEM
92 159
110 793
125 014
132 841
154 261
166 418
57 211
-12%
-39%
7
Dow
4 217
11 884
12 794
33 675
44 056
38 493
42 417
29%
-2%
8
24 519
33 486
53 017
57 449
72 040
56 353
36 750
2%
-29%
9
Korea Petrochemical
-
4 308
5 577
18 840
36 479
65 016
30 861
48%
-8%
10
SNOS
25 868
30 826
37 514
34 339
33 429
35 781
27 711
-2%
-9%
11
Shurtansky GCP
5 201
6 839
27 964
52 544
44 399
26 779
25 585
30%
-24%
12
Exxon Mobil
9 801
10 746
11 179
17 517
22 139
22 917
25 275
19%
7%
13
Ineos Polyolefins
4 214
7 260
7 682
17 770
28 331
28 998
24 696
28%
-7%
14
Polymir
31 033
34 255
34 178
38 883
39 135
36 049
23 583
-7%
-22%
15
Sabic
603
819
2 054
6 378
5 240
1 927
18 836
87%
90%
16
Sevilen
23 862
28 490
29 052
29 106
24 468
24 599
16 836
-10%
-17%
17
LyondellBasell
6 387
2 731
6 649
16 278
26 372
21 111
11 392
33%
-34%
18
Total Petrochemicals
1 279
7 678
8 526
13 046
13 438
6 492
9 134
4%
-18%
19
Daelim
899
297
2 532
9 806
25 326
18 671
8 338
95%
-43%
20
Hyundai Petrochemical
1 774
4 850
6 399
5 761
7 377
9 676
3 862
-4%
-28%
21
TVK
1 556
1 299
2 401
9 208
7 832
3 834
3 835
24%
-30%
22
LG Chem
7 029
2 957
4 039
5 936
8 039
7 333
3 644
4%
-33%
23
DuPont
1 404
1 417
2 286
3 024
3 908
2 319
2 906
15%
-14%
24
Samsung Total
-16%
25
Unipetrol
26
Chevron Phillips
Please,
version
70 see
718 the full98
460 of the62Report
154
230
848
2 048
3 088
3 551
6 339
2 518
24%
2 979
3 566
4 569
3 437
2 208
4 138
2 239
-9%
1%
-
-
-
-
1 582
3 884
2 159
-
17%
27
Henkel
1 319
1 561
1 687
1 406
1 622
1 649
1 516
-1%
-3%
28
Honam Petrochemical
1 688
225
423
1 143
1 908
1 873
1 330
43%
-17%
29
DEXPlastomers
338
610
786
1 147
1 720
972
1 145
13%
-18%
30
Polimeri Europa
1 406
1 874
1 416
1 647
1 513
1 459
985
-12%
-19%
31
Thai Petrochemical
-
-
-
372
5 460
1 164
876
-
-60%
32
Hanwha Corporation
2 333
1 588
2 478
1 087
618
1 642
809
-13%
14%
33
Braskem
-
-
213
834
1 340
1 165
755
-
-25%
34
Ampacet
-
-
-
352
490
557
721
-
21%
35
Sharq
31
1
-
-
87
272
675
245%
179%
36
Fujian
-
66
99
65
441
1 050
629
57%
19%
37
Tosaf
-
-
-
1 821
4 103
3 880
593
-
-62%
38
SK Corporation
204
525
138
579
5 326
4 889
563
1%
-67%
39
Titan Petrokimia
-
-
-
-
1 292
1 646
506
-
-37%
40
Marun Petrochemical
-
-
-
-
-
-
443
-
41
others
23 380
20 494
22 182
44 432
44 218
33 071
13 557
-8%
-
Total
819 881
988 544
1 123 968
1 293 920
1 523 143
1 541 450
1 325 835
6%
-
MARKET
R E P O R T
-45%
C O M P A N Y
-7%
Source: MRC
49
MARKET
R E P O R T
C O M P A N Y
Borealis
PE domestic supply by types, MT
2007
2008
2009
2010
2011
2012
2013
2014
2015
AAGR,
5 y, %
32 507
32 552
47 159
61 093
36 103
61 325
14%
AAGR,
2 y, %
№
Product type
1
LDPE
5 190
10 017
27 997
2
HDPE
4 865
4 844
5 988
6 334
8 832
13 771
18 534
14 652
13 535
16%
-15%
3
LLDPE
177
266
401
1 106
1 397
6 744
13 430
8 766
9 164
53%
-17%
4
copolimer
36
535
2 024
1 670
2 206
2 862
5 300
2 367
3 879
18%
-14%
5
EVA
-
-
9
38
51
37
-
-
60
10%
-
0%
6
others
110
61
41
135
92
144
102
266
184
6%
34%
-
Total
10 379
15 723
36 460
41 789
45 130
70 718
98 460
62 154
88 147
16%
-5%
2003
2004
2005
2006
2007
2008
2009
2010
AAGR,
5 y, %
PE domestic supply by technologies , MT
2002
№ Technology
AAGR,
2 y, %
1
extrusion coating
4 433
9 671
29 064
27 840
27 210
39 650
56 452
32 217
59 920
17%
3%
2
cabel extrusion
2 366
3 143
5 778
8 299
9 510
12 793
18 479
16 073
14 829
12%
-10%
3
film extrusion
701
741
775
1 355
2 074
7 323
16 995
10 761
9 758
48%
-24%
4
blown molding
354
159
292
535
1 367
3 931
1 294
1 703
1 813
28%
18%
5
IM
1 153
1 035
277
908
2 039
3 695
2 686
896
679
-6%
-50%
6
pipe extrusion
22
-
0
379
738
1 495
563
430
219
-10%
-38%
7
others
1 349
975
274
2 473
2 193
1 831
1 991
74
930
-18%
-32%
-
Total
10 379
15 723
36 460
41 789
45 130
70 718
98 460
62 154
88 147
16%
-5%
2002
2003
2004
2005
2006
2007
2008
2009
2010
AAGR,
5 y, %
AAGR,
2 y, %
PE domestic supply by grades, MT
№
Grade
1
Borcoat HE 3450
743
6 655
23 763
23 798
23 579
34 848
48 783
28 280
55 076
18%
6%
2
Visico LE 4423
6
18
90
711
1 099
2 438
3 780
4 118
4 501
45%
9%
3
Borcoat ME 0420
36
535
2 024
1 670
2 182
2 862
5 299
2 362
3 841
18%
-15%
4
LE4205R
64
41
43
375
190
742
2 351
2 356
3 035
52%
14%
5
Borstar FB2310
-
3
19
11
107
820
1 526
1 902
2 805
203%
36%
6
Borstar FB4370
-
-
-
-
-
133
684
848
2 306
7
others
9 530
8 471
10 520
15 224
17 973
28 875
36 036
22 289
16 583
2%
-32%
-
Total
10 379
15 723
36 460
41 789
45 130
70 718
98 460
62 154
88 147
16%
-5%
MARKET
-
R E P O R T
C O M P A N Y
84%
Source: MRC
50
MARKET
R E P O R T
C O M P A N Y
About us
О нас
Market Report Company was founded in 2003.
Our purpose is giving the most professional
information
on petrochemical
markets
of Russia,
Маркет Репорт
была основана
в 2003
году.
CIS and East
countries.
Наша
цельEuropean
предоставление
самой
Today MRC prepares regular
market reports on
профессиональной
информации
на
markets of polyethylene,
and
нефтехимическом
рынкеpolypropylene,
России, СНГPVC
и стран
polysterol.
In
addition,
our
analysts
possess
Восточной Европы.
informationМаркет
about Репорт
markets готовит
of additives,
films,
Сегодня
регулярные
pipes, window
shapes по
and рынкам
auto components.
рыночные
обзоры
полиэтилена,
полипропилена, ПВХ и полистирола. Кроме
того, наши аналитики владеют информацией
по рынкам аддитивов, мастербейчей, пленок,
труб, оконных профилей и автокомопнентов.
Our clients
Top-50 world’s petrochemical companies trust us,
the summary sales volume of which exceeds
Russian GDP’s level in more than twice.
For instance, our clients are: Anwil, Akzo Nobel,
Arkema,доверяют
LyondellBasell,
BASF,
B&B,
Нам
Топ-50
нефтехимических
Chemopetrol,
Ciba, суммарный
Clariant, Commerzbank,
Dow,
компаний
мира,
объем продаж
DuPont, ExxonMobil,
Chem, российского
Mitsubishi, Mitsui,
которых,
превышаетLG
уровень
ВВП
Milliken,
Nexant,
Itochu,
NKNH,
Nubiola,
Polimeri
более, чем в два раза.
Europa,
R&H,
Samsung,
Solvay,
Shin-Etsu,
Total
Нашими клиентами, например, являются:
Petrochemical,
TVK, Huhtamaki,
Anwil,
Akzo Nobel,
Arkema, Lukoil-Neftehim,
LyondellBasell,
Sibur, Sayanskhimplast,
Plastkard,
BASF,
B&B, Chemopetrol,
Ciba, BashHim,
Clariant,
Kazanorgsintez,
Tatneft
and
others.
Commerzbank, Dow, DuPont, ExxonMobil, LG
Наши клиенты
Chem,
Mitsubishi, Mitsui, Milliken,
Nexant,
Itochu, НКНХ, Nubiola, Polimeri Europa, R&H,
Samsung, Solvay, Shin-Etsu,Total Petrochemical,
TVK, Huhtamaki, Лукойл-Нефтехим, Сибур,
Саянскхимпласт,
Пласткард,
БашХим,
Казаньоргсинтез, Татнефть и другие.
Reports
Today MRC prodeces about 1500 reports during
a year. Our products portfolio includes:
· Annual reports;
· Weekly price reports;
· Monthly reports;
Сегодня Маркет Репорт публикует в течение
· DataScope;
года около 1500 обзоров.
В наш портфель
·продуктов
ScanPlast;
включаются:
· PlastGuide;
·· Ежегодные
обзоры
Prices forecast;
·· Еженедельные
ценовые обзоры
Top-50;
·· Ежемесячные
обзоры
Special projects.
· ДатаСкоп
· СканПласт
· ПластГид
· Прогноз цен
· Тoп-50
· Специальные проекты
Обзоры
Contacts
Moscow: +7 495 543 91 94
London: 44 20 814 422 25
Kiev: +38 044 599 29 50
[email protected]
Контакт
Common information
New Reports
We are happy to present a new Annual Report, which, as we believe, is unique in the world practice. We spent nearly four
years to develop a new format of our Annual Reports. We did our best to cut down the text part of the Report to save your
time, and to present the most important considerations (bullets) generated independently by our analysts.
We have begun to use hyperlinks that allow you to “travel” through the Report not being afraid of getting lost somewhere in
the great number of data and figures. You also could see the video of Russian top-managers inside of this Report.
How our reports differ from others
You probably have already got used to our Annual reports, and you remember that they differ from similar products in the
most comprehensive coverage of data. However, for the recent two years we have been observing an increasing pressure on
the part of “analysts” who have been spreading data on the CIS polymers market being fully confident that, having offered
general figures out of customs databases, they would get a comprehensive analysis of the market.
To waive any questions as to the quality of our data, MRC’s specialists developed conceptually new annual analytical reports,
which, as we believe, are unique in the world practice. We have been working hardly for four years to create a brand-new
format of annual reports. The slogan of our new annual reports is “As detailed as it can be”. The point is that this is probably
for the first time in the world practice when a polymer market of a single country is described so minutely.
Information system used to prepare our Reports
Today, we use about 120 directories that, for example, include:
- 26 polymers processing technologies and associated products
- 66 processing sectors of polymers and associated products
- 240 types of finished goods made of polymers
- 4025 grades of polymers (8 analysis aspects)
- 165 producers of polymers (5 analysis aspects)
- 2560 brands of equipment (analysis by 6 parameters, including output capacity of each line), operated by domestic
converters since 2000;
- 450 world equipment manufacturers, whose equipment has been used by domestic converters since 2000;
- all postal codes in the Russian Federation (to define postal addresses of each company in our Report);
- financial and production figures by nearly 20 thousand companies (converters, traders and other firms), working in the CIS
polymers market, by more than 20 activity categories (see also PlastGuide Project).
Data Analysis draws up reports automatically
Today, absolutely all diagrams and tables in our annual reports are being made automatically. Each analyst of MRC uses the
software product “MRC: Data Analysis”, which helps draw up data for an annual report within a few minutes. The software
has been developed by the team of MRC’s specialists under the general direction of Professor Basmanov E.A., Doctor of
Engineering Science.
Today, Data Analysis includes uniform processing of all fragmented data, which are used to understand operations of each
converter in every single market of polymers. Generally, before presenting our conclusions in the annual report, our analysts
do a lot of work in the course of the year and, nearly every day, they process the following data:
- production of polymers by each polymer grade of each domestic producer;
- production of finished goods made of polymers by each producer, as well as by type of finished goods, sector and
processing technology;
- import of finished goods made of polymers by each foreign producer, each type of finished goods, sector and processing
technology;
- export of finished goods made of polymers by each exporter, each domestic converter, by each type of finished goods,
sector and processing technology;
www.mrcplast.com
www.mrcplast.ru
Москва:
+7 495 543 91 94
Лондон: 44 20 814 422 25
Киев: +38 044 599 29 50
- import of polymers by each foreign producer, each domestic trader, converter, processing technology, processing sector,
type of finished goods, type and grade of polymer;
- export of polymers by each domestic producer, domestic trader, polymer type, and polymer grade;
[email protected]
www.mrcplast.com
www.mrcplast.ru
- import of equipment to produce finished polymer goods by each brand of equipment, each equipment producer, domestic
converter, processing technology, processing sector and (if possible) each type of finished goods;
- ownership of each converter to determine associated companies; if needed, to regard a converter as a group of companies;
- carriage by rail by each domestic producer, domestic trader, converter, type of polymer, grade of polymer, processing
technology, processing sector and type of finished goods;
- financial indicators, of both an individual converter and his affiliated structures;
- operations with key suppliers of raw materials and supplies.
Написать
180, Tottenham Court Road, Suite 12 W1T 7PD,
London, UK
107113, г. Москва, Сокольническая пл, д. 4А
61002, г. Харьков, пр. Ленина, 45Б., оф. 26А
Оформить подписку
Подробнее о графике выхода обзоров
http://www.mrcplast.ru/docs/MRC_schedule_Rus_
2010%20%28Annual%20reports%29.pdf
Цены и скидки:
http://www.mrcplast.ru/docs/MRC_prices_Rus_20
10.pdf
51
Формы оплаты:
http://www.mrcplast.ru/docs/MRC_payments_Rus.
pdf Ежегодный обзор
MARKET
R E P O R T
C O M P A N Y

Polyethylene in Russia

Transcription

Similar documents

NIP TUCK: private domain extraction and public

RAW CABLE DEPT

Extrusion - Plastics Technology

Read - Microdia

Die Ovens - Granco Clark

specialty extrusion systems

the full article.

DieTech - A Virtual Reality Environment For Extrusion Dies