Force/Tension Measuring Instruments Series

Transcription

Catalog
No.
Digest Version
Force/Tension Measuring
Instruments Series
DORCE GAUGES
TEST STAND FOR FORCE GAUGES
TENSION METERS
75781
D
Force Gauges
Ideal for measurements of various "forces", such as pressing force, tensile force,
each type of intensity, and peel force.
Communication Enhancing Type (with output)
Communication Enhancing Type (with output)
High-Performance Type (with output)
Economic Type (without output)
FGPX Series
FGPX H Series
FGP Series
FGJN Series
P3
P3
P4
P5
Analog Force Gauges
Sensor Isolated Type Digital Force Gauges
Rheo Tester
Measurement Data Wireless Transceiver Equipment
MF Series
FGPX-RT Series
FGRT Series
TELEMEASURE
P7
P8
P9
P8
Equipped with easy and useful functions for "force" measurements necessary for
research development and quality management.
Free
Test results can be imported to a PC using the
specialized software "TORIEMON USB".
(Free downloads from website)
Comparator judgment
Zeroing
Peak value measurement
Unit change
Power
Connector for digimatic signals
USB connector
*FGPX Series
1
Force/Tension Measuring Instruments Series
Test Stands
Install a forge gauge to use as a simple test machine.
Load Simple Test Stand
Motorized Test Stands for Force Gauges (Vertical Type)
Compact Desktop Test Stands
Motorized (Horizontal Type)
FGS-50E-L (Low Speed Specifications)
FGS-50E-H (High Speed Specifications)
FGS-100VC/250VC
FGS-TV
FGS-50XB-L (Low Speed Specifications)
FGS-50XB-H (High Speed Specifications)
P10
P11
P14
Manual Lever Type
Manual Lever Type
Manual Handle Type
FGS-5S
FGS-50L
FGS-50H
P13
P12
Exclusive Jigs
P13
P12
P15
Tension Measurement
High-Performance Type
Hand Held Model Digital
Tension Meters (with output)
Hand Held Model Analog
Tension Meters for Low
Tension Measurement
Stand Alone Type
Tension Meters for Tapes,
Films, and Belts
Stand Alone Type
General Purpose Tension Meters
Pulling/Pushing
Amplifier Built-in Model
Load Cells
DTMX
ZF2
PLS-K--C Series
PLS- K- -B Series
PLC
Series
Series
P18
P19
P20
Series
P21
P19
Product Specification Icons
Equipped with USB communication
function
1000
times/sec
Enables high-speed peak
measurement of 1000 times/sec
Motored
Enables automatic measurement
through the motor
Digimatic
Can connect to a Mitsutoyo Digimatic Printer
RS-232C
output
Can connect to a PC or printer
D/A
analog
output
Can connect to a pen recorder for
storing data
Manual
Enables high-speed measurement
by manual operation
LED
comparator
Can set, judge, and output upper and lower limits
(LEDs display)
Hanger
With attached hanger for storage or
suspension
Can change units between N and kg
(g)
Digital
display
Can digitally display forward speed
and shift distance
External
zeroing
Enables zeroing using external signals
Comparator
Can set, judge, and output upper
and lower limits
Overload
Can output signals to protect the
main unit when overloaded
Analog
output
Can connect to a pen recorder for
storing data
External
signal
Can switch among a hold function that holds the
indicated value, zeroing function, and PEAK mode
Reverse
display
Can turn numbers and units upside
down on LCD display
Push Pull
Peak
Can register and indicate each peak
value of pressing and pulling
Program
setting
Can set the movement program
Supports
lenth
meter
Can be installed with the Mitsutoyo length meter
(optional)
Memory
1000
Can continuously store up to 1000
sets of measurement data. Enables
statistics processing, such as for
max. and min. values
Unit
Can import data using the
specialized free software
Can import data using the standard
software (optional)
2
Digital Force Gauges
Model
FGPX-0.2
FGPX-0.5
FGPX-1
FGPX-2
FGPX-5
FGPX-10
FGPX-20
FGPX-50
FGPX-100
FGPX-250H
FGPX-500H
Maximum load
±2.000N
0.2kg
±5.000N
0.5kg
±10.00N
1kg
±20.00N
2kg
±50.00N
5kg
±100.0N
10kg
±200.0N
20kg
±500.0N
50kg
±1000N
100kg
± 2500N
250kg
± 5000N
500kg
Dimensional drawing
M6
(M6)
[M4]
75
Memory 1000 RS-232C
1000 times/sec output
USB
130
Equipped with enhanced
communication and memory functions
149
48
FGPX Series
FGPX H Series
(mm)
75
34
13
40
(17)
[11]
19
FGPX-0.2 to100
12
(12)
[6]
Communication Enhancing
Type (with output)
D/A
analog
output
LED
Overload Reverse Push Pull Hanger
display
comparator
Peak
Mounting screw hole
4-M4 depth 6
Digimatic External External
zeroing signal
Unit
TORIEMON
Free downloads from
website
USB
Communication functions for both input and output
have been enhanced.Test results can be imported to a
PC using the specialized software "TORIEMON USB".
38
68
The values in parentheses ( ) show dimensions for FGPX-1 to 50.
The values in parentheses [ ] show dimensions for FGPX-0.2 to 0.5.
(Dimensions of other parts are common in all models)
FGPX-250H/500H
52
23.5
70
M10
12
I ndicates judgment results using LEDs,
z
which allows you to check immediately
54
Indicates "HI, LO, OK" using LEDs. Also capable of signal
output.
120
C an switch among a hold function that
z
holds the indicated value, zeroing function,
and PEAK mode
FGPX
200
z
214
Can import data by connecting through a
z
PC USB port
FGPX-H
⑵
⑶
⑴
⑴
⑵
⑶
⑷
⑷
(1) Connector for digimatic signals
(2) Connector for AC adapter
Mounting screws in 4 places
4-M6 depth 8
Handle mounting hole
With cover
57
82
(3) External connector
(4) USB connector
Specifications
Model
Rated capacity (R.C.) Note 1)
Available display range
Display resolution
Unit
Measurement method
Display cycle
Sampling cycle
Accuracy
Display
Overload capacity
Comparator function
Communications
Analog
Output
Input signal
Power
Auto power off function
Memory function
Operating temperature (humidity) range
&YUFSOBMEJNFOTJPOT
Weight
Accessories
Communication software
Note 1) R.C.=RATED CAPACITY
3
FGPX-0.2
FGPX-0.5
±2.000N
±5.000N
(±200.0g)
(±500.0g)
±2.000N
±5.000N
(±200.0g)
(±500.0g)
0.001N/0.1g
FGPX-1
±10.00N
(±1000g)
±10.00N
(±1000g)
0.01N/1g
FGPX-2
FGPX-5
FGPX-10
FGPX-20
FGPX-50
FGPX-100
FGPX-250H
FGPX-500H
±20.00N
±50.00N
±100.0N
±200.0N
±500.0N
±1000N
±2500N
±5000N
(±2.000kg)
(±5.000kg)
(±10.00kg)
(±20.00kg)
(±50.00kg)
(±100.0kg)
(±250.0kg)
(±500.0kg)
±20.00N
±50.00N
±100.0N
±200.0N
±500.0N
±1000N
±2500N
±5000N
(±2.000kg)
(±5.000kg)
(±10.00kg)
(±20.00kg)
(±50.00kg)
(±100.0kg)
(±250.0kg)
(±500.0kg)
0.01N/0.001kg
0.1N/0.01kg
1N/0.1kg
Unit change between N and kg (g) (reverse display available)
Normal measurement, plus peak, minus peak
1 time/sec, 2 times/sec, 3 times/sec, 5 times/sec, 10 times/sec, 20 times/sec
1000 times/sec Note 2)
±0.2%R.C. and ±1/2digit (at 23ºC) Note 3)
r-$%4JHOFEEJHJUEJTQMBZ'POUIFJHIUNN
r+VEHNFOU-&%T)J@/(0,-P@/(
QJFDFT
200%R.C.
150%R.C.
+VEHFT)J@/(0,BOE-P@/(BOEPVUQVUTVTJOHUIFKVEHNFOU-&%TBOEPVUQVUTJHOBMT
[USB] Provided (PCs can communicate with the unit using the specialized communication software. A connection cable is a standard accessory.) [RS-232C] Provided (PCs can communicate with the
unit using the specialized communication commands. A connection cable is an optional accessory.) Can connect to a Mitsutoyo Digimatic Printer
r70VUQVUTGPSUIFBWBJMBCMFSBOHFPGEJTQMBZ
BDDVSBDZN7CJU%"DPOWFSUFSNFUIPEr0VUQVUVQEBUFTUJNFTTFD[FSPTFUUJOHBWBJMBCMFMPBESFTJTUBODFLüPSNPSF
<0WFSMPBE>164)16--0QFODPMMFDUPSPVUQVUNBY%$7N"
<$PNQBSBUPS>)*0,-00QFODPMMFDUPSPVUQVUNBY%$7N"
;&30FYUFSOBM[FSPTFUUJOH
)0-%FYUFSOBMIPME
1&",QFBLNPEFTFUUJOH
r"$BEBQUFS%$7N"
PSCVJMUJO/J.)CBUUFSZSFDIBSHFBCMF
NFBTVSFNFOUBWBJMBCMFEVSJOHDIBSHJOHr#BUUFSZPQFSBUJOHUJNF"QQSPYIPVSTGSPNGVMMDIBSHFr$IBSHJOHUJNF.BYIPVST"VUPNBUJDBMMZFOETXIFOGVMMZDIBSHFE
10 min (The unit can be used while connected to the AC adapter), this function can be disabled.
r$POUJOVPVTNFNPSZTFUT4JOHMFNFNPSZTFUT4UBOEBSENFNPSZTFUTDBOCFTXJUDIFECFUXFFOUIFUISFFNFNPSZNPEFT
r&RVJQQFEXJUITUBUJTUJDTGVODUJPONBYNJOQFBLBWFSBHFTUBOEBSEEFWJBUJPO
<5FNQFSBUVSF>UP$/PDPOEFOTBUJPO
<)VNJEJUZ>UP3)/PDPOEFOTBUJPO
8JEUIY5IJDLOFTTY-FOHUINN
0OMZ-FOHUINN
"QQSPYLH
"QQSPYLH
"QQSPYLH
Measurement adapters (6 types), hanger, AC adapter, carrying case, USB cable, handle (only for FGPX-H)
Specialized communication software (USB compatible) Free downloads from website
Note 2) 150 times/sec when the measurement filter (f05) is set to 150msec.
Note 3) "digit" means 1 count for digital display. ±1digit means the last digit has 1 count tolerance of digital counting.
Model
FGP-0.2
FGP-0.5
FGP-1
FGP-2
FGP-5
FGP-10
FGP-20
FGP-50
FGP-100
Maximum load
±2.000N
0.2kg
±5.000N
0.5kg
±10.00N
1kg
±20.00N
2kg
±50.00N
5kg
±100.0N
10kg
±200.0N
20kg
±500.0N
50kg
±1000N
100kg
Dimensional drawing
High-Performance Type
(with output)
(mm)
D/A
analog
output
130
Memory 1000 RS-232C
40
Unit
TORIEMON
USB
75
Comparator Overload Reverse Push Pull Hanger
display
Peak
147 (141) [149]
USB
48
Extensive measurement
functions
17
(11)
[19]
M6
(M4)
[M6]
FGP Series
12
(6)
[12]
13
75
34
Free downloads from
website
Using with a motorized test stand widens the variety
of uses. Test results can be imported to a PC using
the specialized software "TORIEMON USB".
A USB interface makes adoption data
z
import to a PC easy
68
38
Mounting screw hole
4-M4 depth 6
The values in parentheses ( ) show dimensions for FGP-0.2 to 0.5.
The values in parentheses [ ] show dimensions for FGP-100.
(Dimensions of other parts are common in all models)
Provides 3 memory modes: Continuous,
z
Single, and Standard
USB connector
Up to 1000 sets can be stored (continuous memory mode)
Connector for AC adapter
Widens the variety of measurements when
z
used with a motorized test stand
External connector
Equipped with a comparator function
z
Setting upper and lower limit values
z
enables acceptance of measurement
values judgment
Specifications
Model
FGP-0.2
FGP-0.5
FGP-1
FGP-2
FGP-5
FGP-10
FGP-20
FGP-50
FGP-100
±2.000N (±200.0g)
±5.000N (±500.0g)
±10.00N (±1000g)
±20.00N (±2.000kg)
±50.00N (±5.000kg)
±100.0N (±10.00kg)
±200.0N (±20.00kg)
±500.0N (±50.00kg)
±1000N (±100.0kg)
±2.000N (±200.0g)
±5.000N (±500.0g)
±10.00N (±1000g)
±20.00N (±2.000kg)
±50.00N (±5.000kg)
±100.0N (±10.00kg)
±200.0N (±20.00kg)
±500.0N (±50.00kg)
±1000N (±100.0kg)
Display resolution
0.001N/0.1g
Unit
0.01N/1g
0.01N/0.001kg
0.1N/0.01kg
1N/0.1kg
Unit change between N and kg (g) (reverse display available)
Measurement method
Normal measurement, plus peak measurement, minus peak measurement
Display cycle
Sampling cycle
1000 times/sec Note 2)
Accuracy
±0.2%R.C. and ±1/2digit (at 23ºC)
Number display/Unit display
4JHOFEEJHJUEJTQMBZ'POUIFJHIUNN
4JHOTDBOCFPQUJPOBMMZTFUGPSUIFMPBEEJSFDUJPOSFWFSTFEJTQMBZBWBJMBCMFEJHJU-$%EJTQMBZ'POUIFJHIUNN
7BSJPVTEJTQMBZ
-0#"5MPXCBUUFSZWPMUBHF
#"5EVSJOHDIBSHJOH
073PWFSMPBE
1&",QFBLIPMENPEF
Display
Overload capacity
200%R.C.
Tracking function
Output
signal
USB
1SPWJEFE1$TDBODPNNVOJDBUFXJUIUIFVOJUVTJOHUIFTQFDJBMJ[FEDPNNVOJDBUJPOTPGUXBSF"DPOOFDUJPODBCMFJTBTUBOEBSEBDDFTTPSZ
$POUJOVPVTUSBOTNJTTJPONBYUJNFTTFD
Other outputs
Power
150%R.C.
Provided (can be switched ON/OFF)
RS-232C Analog Overload Comparator (only for FGP-) Other cables including analog cables are optional.
r"$BEBQUFS%$7N"
r.FBTVSFNFOUBWBJMBCMFEVSJOHDIBSHJOHr#BUUFSZPQFSBUJOHUJNF"QQSPYIPVSTGSPNGVMMDIBSHFr$IBSHJOHUJNF.BYIPVST"VUPNBUJDBMMZFOETXIFOGVMMZDIBSHFE
10 min (The unit can be used while connected to the AC adapter), this function can be disabled.
Memory function
r$POUJOVPVTNFNPSZTFUT4JOHMFNFNPSZTFUT4UBOEBSENFNPSZTFUTDBOCFTXJUDIFECFUXFFOUIFUISFFNFNPSZNPEFT
r&RVJQQFEXJUITUBUJTUJDTGVODUJPONBYNJOQFBLBWFSBHFTUBOEBSEEFWJBUJPO
Comparator function
Available (upper and lower limits)
Operating temperature (humidity) range
<5FNQFSBUVSF>UP$/PDPOEFOTBUJPO
<)VNJEJUZ>UP3)/PDPOEFOTBUJPO
&YUFSOBMEJNFOTJPOT
Weight
"QQSPYLH
Accessories
Measurement adapters (6 types) Note 3), hanger, AC adapter, carrying case, USB cable
Communication software
0OMZ-FOHUINN
"QQSPYLH
Note 2) 150 times/sec when the measurement filter (f05) is set to 150msec.
Note 3) M4 measurement adapters are supplied for models of 0.5 or less, and M6 measurement adapters for those of 1 or more.
Digital Force Gauges
Model
FGJN-2
FGJN-5
FGJN-20
FGJN-50
Maximum load
±20.00N
2kg
±50.00N
5kg
±200.0N
20kg
±500.0N
50kg
Dimensional drawing
(mm)
Economic type (without output)
75
34
13
12
M6
1000 Reverse Push Pull Hanger
times/sec display
Peak
48
Digitally display
measurement results
17
FGJN Series
Unit
40
147
Using a NiMH battery enables long time
z
operation
130
Rated capacity: 20.00N (2.000kg) to 500.0N
z
(50.00kg)
75
A dopts the reverse method to turn the
z
displayed numerical value and unit upside
down with the press of a button
Can change the unit between N and kg (g)
z
with the press of a button
Can measure each peak value for the plus
z
and minus sides (peak hold).
H igh-speed peak measurement of 1000
z
times/sec
The measurement frequency (display cycle)
z
can be selected from options of up to 20
times/sec
38
68
Mounting screw hole
4-M4 depth 6
Power connector
Specifications
Model
'(+/
'(+/
'(+/
'(+/
±20.00N
(±2.000kg)
±50.00N
(±5.000kg)
±200.0N
(±20.00kg)
±500.0N
(±50.00kg)
±20.00N
±2.000kg
±50.00N
±5.000kg
±200.0N
±20.00kg
±500.0N
±50.00kg
Display resolution
Unit
0.1N/0.01kg
Unit change between N and kg (reverse display available)
Measurement method
Normal measurement, plus peak measurement, minus peak measurement
Display cycle
Sampling cycle
1000 times/sec
Accuracy
±0.3%R.C. and ±1/2digit (at 23ºC)
Temperature effect
(BJO-0"%$;FSP3$$
(Zero point drift can be canceled using the tracking function)
Display
/VNCFSEJTQMBZ4JHOFEEJHJU-$%EJTQMBZ4JHOTDBOCFPQUJPOBMMZTFUGPSUIFMPBEEJSFDUJPOSFWFSTFVQTJEFEPXO
EJTQMBZBWBJMBCMF
'POUIFJHIUNN
6OJUEJTQMBZEJHJUEJTQMBZ'POUIFJHIUNN
7BSJPVTEJTQMBZ
-0#"5MPXCBUUFSZWPMUBHF
#"5EVSJOHDIBSHJOH
073PWFSMPBE
1&",QFBLIPMENPEF
Overload capacity
200%R.C
Tracking function
Provided (can be switched ON/OFF)
Power
"$BEBQUFS%$7N"
.FBTVSFNFOUBWBJMBCMFEVSJOHDIBSHJOH#BUUFSZPQFSBUJOHUJNF"QQSPYIPVSTGSPNGVMMDIBSHF
$IBSHJOHUJNF.BYIPVST"VUPNBUJDBMMZFOETXIFOGVMMZDIBSHFE
10 min (The unit can be used while connected to the AC adapter), or OFF
Operating temperature range
UP$/PDPOEFOTBUJPO
Operating humidity range
UP3)/PDPOEFOTBUJPO
&YUFSOBMEJNFOTJPOT
Weight
"QQSPYLH
Accessories
Measurement adapters (6 types), hanger, AC adapter, carrying case
5
0.01N/0.001kg
Force Gauge Attachment Adapters (as a set supplied with the main unit)
Shape
FGPX
FGP
FGJN
(for M6)
MF
(for M6)
Pointed shape
Projection
shape
Groove shape
Flat face
Line
pulling shape
Elongated rod
Round drill 70º
Mountain
shape 70º
V groove 70º
ø12mm
Hook
L : 92mm
Ř0PHDVXUHPHQWDGDSWHUVDUHDWWDFKHGIRUPRGHOVRI1RUOHVV
Round drill 90º
Mountain
shape 90º
V groove 90º
ø15mm
Hook
L : 90mm
Ř$GDSWHUVLQFOXGHDWRWDORIWKHW\SHVPHQWLRQHGDERYHELJKRRNDQGKRRNPHWHU)RUDWWDFKPHQWVIRUWKH1WR1PRGHOVFRQWDFWXVVHSDUDWHO\
*Shapes may differ slightly depending on sizes. For details, contact us.
TORIEMON
USB
Data Import Software Specialized for FGP･FGPX
TORIEMON USB
Functions
Use the USB cable and connect the unit to a PC. The specialized data import software "TORIEMON USB" (that can
be downloaded free of charge from our website) can be used to import test results to the PC.
zTrigger (Starts data import when the specified load is attained)
zSingle data import (measurement data, ±peak data)
zContinuous data import
zImport capacity: Can be set to up to 65,000 sets
zImport interval: 10, 20, 50, 100 times/sec
zCan import data by connecting through a USB port on a PC
zEquipped with the USB communication function, it's easy to connect to a PC.
6
Analog Force Gauges
Model
MF-10N
MF-20N
MF-30N
MF-50N
MF-100N
MF-200N
MF-300N
MF-500N
Maximum load
10N
1.020kg
20N
2.039kg
30N
3.059kg
1
5.099kg
100N
10.20kg
200N
20.39kg
300N
30.59kg
500N
50.99kg
Accessories
Measurement adapters (8 types), carrying case
Dimensional drawing
(mm)
30
50
M6
36
MF Series
20
10
Analog Force Gauges
Extensive measurement
functions
Analog force gauges with a high level of visibility that
can be used without power supply
Solidly built with an aluminum die-cast case
z
I ndicates peak values using a friction
z
pointer mechanism
230
Enables measurement in both directions of
z
pulling and pushing
29
M6
10
Mounting screw hole
0GHSWK
Carrying case
Specifications
Model
MF-10N
MF-20N
MF-30N
MF-50N
MF-100N
MF-200N
MF-300N
MF-500N
10N
20N
30N
50N
100N
200N
300N
500N
Minimum scale
0.05N
0.1N
0.2N
0.25N
0.5N
1N
2N
2.5N
Accuracy
Stroke
10mm
Measurement method
/PSNBMNFBTVSFNFOUGSJDUJPOQPJOUFSGSFF
1FBLNFBTVSFNFOUGSJDUJPOQPJOUFSTFUUPUIFNBYJNVNWBMVF
&YUFSOBMEJNFOTJPOT
Weight
H
Accessories
.FBTVSFNFOUBEBQUFSTUZQFT
DBSSZJOHDBTFJOTUSVDUJPONBOVBMDPQZ
±0.2%/R.C.
Dimensional drawing
13
38
(mm)
USB connector
Measurement part
Load cell connector
130
External connector
Display part
68
Signal connector
FGPX-RT Series
An optional load cell is supplied.
Enables measurement
in a small space
*For order, specify the models for the main unit (FGPX-RT) and load cell.
*For supported sensor parts, contact us separately.
USB
Memory 1000 RS-232C
D/A
analog
output
Specifications
Unit
TORIEMON
USB
Free downloads from
website
Supports the wide range of loads (±2.000N
z
to ±1000N) by replacing sensor parts
-PBEDFMM
Measurement unit
Measurement method
Sampling cycle
Display cycle
Display
Reversed display
Power
E nables measurement even in a small
z
space or distant place that has not been
able to accommodate the main unit before
Battery operating time
Analog
Can store 5 types of load cell calibration
z
data in the main unit
Output
Test results can be imported to a PC using
z
the specialized software "TORIEMON
USB"
FGPX-RT
Isolated type
*TPMBUFEUZQFMPBEDFMMQJFDFT
Stores up to 5 types of calibration data
N or kg unit system
Average, peak
1000 times/sec
1 time/sec to 20 times/sec
-$%
Available
NiMH battery
AC adapter
"QQSPYIPVST
7
USB
RS-232C
Mitsutoyo (digimatic signals)
Overload
)*-00,
;&30)0-%
1000 sets
¤¤
300g
AC adapter, carrying case
USB cable
Model
Comparator Overload Reverse Push Pull Hanger
display
Peak
Communications
Output signal
+VEHNFOUPVUQVU
Input signal
Memory
&YUFSOBMEJNFOTJPOT
Weight
Accessories
*For supported sensor parts, contact us separately.
BETRIX CO., LTD.
Telemeasure
Measurement Data
Wireless Transceiver
Equipment
Instantly transfers measurement data
5FMFNFBTVSFJTTZTUFNFRVJQNFOUVTFEUPBVUPNBUJDBMMZJOQVUNFBTVSFNFOUEBUBUP
a PC without cables. Measurement data will be transferred using the ultra-small
wireless transmitter installed to a digital measurement device through a wireless
receiver (data receiver) connected to a PC.
7BSJPVTRVBMJUZDPOUSPMNBOBHFNFOUGJHVSFTTVDIBTJOTQFDUJPOSFTVMUUBCMFTPS
histograms, can be immediately prepared.
Widely improves operation performance due to no
z
cables being required
Can transfer various measurement data to one PC
z
Equipped with real-time cancel function
z
Software to automatically store, calculate, and analyze
measurement data. Accomplishes high-level tasks
through simple operation.
Add-in software to automatically import measurement
data transmitted from a Telemeasure receiver into an
Excel worksheet.
Transmitter Specifications
8JSFMFTTGSFRVFODZ
7)'.)[8FBLTJHOBMT
Transmission distance
10m (within visibility)
Input signal
Digimatic/RS-232C
Power
Coin battery CR2032
&YUFSOBMEJNFOTJPOT8FJHIU
8¤%¤)H
Data receiver DR30 Specifications
Wireless
Specifications
3FDFQUJPOEJTUBODFN
8JSFMFTTGSFRVFODZ7)'.)[
Wired input
Digimatic signals
'MBUQJO¤
PC output
34$%TVCQJO
Mini printer output
Digimatic signals
Flat 10 pin
ID passing limit function
Sets using DIP switch
Transmitter
Data receiver DR30
Locations for up to 100 measuring souce
devices can be assigned IDs.
Receives measurement data and automatically inputs to a PC.
Actualizes the 2 systems of wireless and wired.
Buzzer sound setting
Sets using DIP switch
Operating
environment
5FNQFSBUVSFUP$
)VNJEJUZUP3)
Power
"$7"EBQUFS%$7
8¤%¤)
&YDMVEJOHSVCCFSTIPFTBOE
antenna parts
&YUFSOBMEJNFOTJPOT
Rheo Tester
Model
FGRT-1
FGRT-20
FGRT-50
FGRT-100
Maximum load
±10N
±20N
±50N
±100N
Dimensional drawing
(mm)
39
5
75
ø10
Rheo Tester
FGRT Series
Measures stress
Memory 1000 RS-232C Comparator
Overload Reverse Push Pull
display
Peak
150
USB
RHEOEMON
USB
Free downloads
from website
Test results can be imported to a PC using the
specialized software "TORIEMON USB".
Measures the internal reaction force that
z
occurs when an external force is applied to
an object, rather than measuring the load
5
Enables acceptance of judgment using
z
comparator judgment display
Stores 1000 sets of measurement data
z
using memory function
Specifications
Model
FGRT-1
FGRT-2
FGRT-5
FGRT-10
Rated load capacity [N]
±10N
±20N
±50N
±100N
Unit
Data Import Software Specialized
for FGRT-
kPa [kilopascal]
Measurement method
Normal measurement/Peak measurement
Display cycle
Select among 1, 2, 3, 5, 10, 20 time(s)/sec
RHEOEMON USB
Sampling cycle
1000 times/sec
Accuracy
±0.2% ±1/2digit
Comparator function
6QQFSBOEMPXFSMJNJUT"DDFQUBODFPGKVEHNFOUGVODUJPO
RHEOEMON
Memory function
USB
USB
Trigger (Starts data import when the
z
specified load is attained)
Single data import (measurement data,
z
±peak data)
Communications
Output
zContinuous data import
Import frequency: Can be set to up to 65,000 sets
Import interval: 10, 20, 50, 100 times/sec
Input
zMemory data import
Can store up to 1000 sets
Provided Communicate with a PC using the specialized software
RS-232C
Provided
Digimatic
Analog
7"DDVSBDZN7
Overload
Plus/minus overload
Comparator
Upper limit, lower limit, NG Pass/Success
ZERO
Zeroing/Peak reset
)0-%
Display hold
1&",
Measurement mode setting
Power
Built-in NiMH battery, with AC adapter
Recommendation of Periodic Calibration
In order to maintain a high level of accuracy, we recommend
a periodic calibration of the unit once a year.
Digital force gauges use the specially designed high-accuracy sensors (load cell).
In order to maintain a high level of accuracy, we recommend a periodic calibration of the unit once a
year.
Complies with ISO/GMP/HACCP
NIDEC-SHIMPO CORPORATION implements periodic calibration, as well as inspection.
Furthermore, ISO calibration ensures traceability with documents attached.
*40DBMJCSBUJPODPOTJTUTPGBTFUPGEPDVNFOUT
certificate of analysis, traceability, official
calibration certificate (load), and calibration
certificate (main unit).
Force Gauge Stands (Motorized)
Model
FGS-50E-L
FGS-50E-H
Maximum load
Supported models
FGS-50E-L
FGS-50E-H
FGJN-2 to 50
FGP-0.2 to 50
FGPX-0.2 to 50
500N
Dimensional drawing
(mm)
150
Cable clip
172
70
13
57
Load Simple Test Stands
Digital Program
Motored Overload display setting
188
680
Force gauges (sold separately)
Stroke: 400
Motorized stand with a long stroke
Force gauge mounting bracket
115
FGS-50E-L (Low Speed Specifications)
FGS-50E-H (High Speed Specifications)
Measurement table
9
3
4USPLFPGNN
Can handle various works simply
129
4 action modes:
z
Manual/Jogging/1 cycle/Return repetition
Front cover ensures safety
z
2 types of forward speed
z
220
358
Low Speed Specifications: 6 to 180mm/min
High Speed Specifications: 20 to 400mm/min
Improves visibility in operation
z
performance, from display (LCD) to various
settings
Detailed force gauge mounting bracket parts
3-M6P=1.0 depth 9
40
(115)
30 30
20
75
Input power supply covers the wide range
z
of AC100 to 240V
(93)
20
4-ø4.5
Detailed measurement table
(150)
(188)
150
93
Specifications
'(4&-
FGS-50E-H
-PX4QFFE4QFDJGJDBUJPOT
High Speed Specifications
Model
Measurement load
500N
Endurance load
Forward speed
500N
UPNNNJO
Speed setting
20 to 600mm/min
Sets the speed using the operation panel
Stroke
NN
'MFYVSBMSJHJEJUZ
NNEJTUBODFCFUXFFOUIFHBVHFUJQBOEUBCMF
XIFOUIFNBYJNVNMPBEJTBQQMJFE
EJHJU-$%*OEJDBUFTNPWFNFOUTQFFEBOEBDUJPONPEF
Display parts
Movement speed
UPNNNJO
20 to 600mm/min
Display
Action mode
.BOVBM."/6
+PHHJOH+0(
DZDMF4*(
3FUVSOSFQFUJUJPO$0/
Overload input
Input
Stops by FGPX (FGP) overload signal
Measurement table
¤NN
UP$/PDPOEFOTBUJPO
Power
"$7UP"$7
Weight
"QQSPYLH
&YUFSOBMEJNFOTJPOT
¤¤NN
Accessories
1 connection cable. 1 power cable. 1 cable clip.
4PDLFUCPMUT.YCPMUTGPSGPSDFHBVHFNPVOUJOH.YCPMUTGPSKJHNPVOUJOH
BMMFOLFZTQBOOFSGPS.GPS.
10
Force Gauge Stands (Motorized/Manual)
Supported models
FGS-100VC
FGS-250VC
FGS-100HB
FGS-250HB
FGJN-2 to 50
FGJN-2 to 50
FGP-0.2 to 100
FGP-0.2 to 100
FGPX-0.2 to 100
FGPX-0.2 to 100
FGPX-250H
Dimensional drawing
(mm)
140
100
50
40
500
19
300
FGS-100HB/250HB
FGS-HB
E nables minimal movement via handle
z
operation
FGS-100HB: 1 handle rotation Approx. 1.33mm
FGS-250HB: 1 handle rotation Approx. 0.55mm
57.5
30
Stroke: 400
82
12.5
11
75
30
30
200
100
Stroke: 400
75
57.5
82
200
885
45 150
45
Adjustment range
Adjustment range
Endurance load
1000N (100kg)
2500N (250kg)
UPNNNJO
Forward speed
Sets the speed using the operation panel
Stroke
NN
'MFYVSBMSJHJEJUZ
Display parts
%PUNBUSJY-$%4JHOFEEJHJU
UPNNNJO
Movement speed display
UPNN
Display Movement distance display
UP
Repetition count display
Action mode
.6/6NPEF.PWFNFOUUPXBSETEPH+0(NPEF+PHHJOH4*/(NPEF3PUBUJPOBMNPWFNFOUCFUXFFOEPHT
$0/5NPEF3FQFBUJOHNPWFNFOUCFUXFFOEPHT130(NPEFQPJOUTQPTJUJPONPWFNFOU
Communications
USB
USB (for PCs)
Input
Overload input
Stops by FGPX(FGP) overload signal
Measurement table
¤NN
UP$/PDPOEFOTBUJPO
"$7
Power
"QQSPYLH
"QQSPYLH
Accessories
Power cable, FGPX(FGP) connection cable, USB cable
PC software
Transmits load and distance data and indicates the graph/With trigger function (Starts data import when the specified load is attained)
$BOTFUUIFGSFRVFODZPGDPOUJOVPVTEBUBJNQPSU8JUIVQQFSBOEMPXFSMJNJUTKVEHNFOUGVODUJPO
Supported force gauges
Power AC socket for force gauges, emergency stop switch
FGP-0.2 to 50,100 / FGPX-0.2 to 50,100
FGP-0.2 to 50,100 / FGPX-0.2 to 50,100 / FGPX-250H
Model
FGS-100HB
FGS-250HB
Measurement load
1000N (100kg)
2500N (250kg)
Endurance load
1000N (100kg)
2500N (250kg)
NN
Stroke
1 handle rotation
Measurement table
Weight
Supported force gauges
11
470
'(47$
Others
Adopts LCD indication for the display panel
100
75 75
2500N (250kg)
Weight
Can measure loads of 2N to 2500N
z
(0.2kg to 250kg)
0
ø16
'(47$
FGS-VC
Simultaneously imports the stand movement
distance and force gauge load data.
Force gauge
mounting surface
1000N (100kg)
Measurement table: 150x200mm
z
FGT-VC
20
45
20
20
Measurement table
Measurement table
Model
Can measure loads of 2N to 2500N
z
(0.2kg to 250kg)
FGT-VC
ø5
ø7
Measurement load
Common
Data Import Software Specialized
for FGS-VC
M10
Specifications
Maximum load
1000N
2500N
Stroke: Movable to up to 400mm
z
M6
10-32UNF
120
300
425
FGS-HB
Model
FGS-100HB
FGS-250HB
100
75 75
Free downloads from
website
Maximum load
1000N
2500N
Force gauge mounting surface
19
Model
FGS-100VC
FGS-250VC
Measurement
table
90
70
40
M8
150
ø8.8
ø4.5
Stroke: 400
Program
setting FGT-VC
Adjustment range
150
9
ø5.5
140
100
50
40
30.5
49.5
120
74
Supports
lenth
meter
100
75 75
FGS-250HB
FGS-VC
Analog Overload Digital
output
display
Force gauge
mounting surface
FGS-100HB
Adds the motorized and handle types to the vertical
type stands.
Actualizes high accuracy measurement in a wider
range of application.
Can install various force gauges.
USB
45
45 150
Adjustment range
Force gauge
Motored
45
20
20
20
Measurement table
Measurement table
200
100
75 75
Handle Style Force Gauge Stands (Vertical Type)
Extends the range of
"force" measurement
ø5
ø7
M10
120
74
FGS-100VC/250VC
Emergency
stop switch
Operation panel
M6
10-32UNF
Force gauge mounting surface
885
Stroke: 400
Lower limit dog
Motorized Test Stands for Force Gauges (Vertical Type)
75
150
2-ø8.8
4-ø4.5
USB
M8
100
30
3-ø5.5
FGS-HB
90
70
40
150
200
Force gauge
30.5
49.5
Upper limit dog
120
9
FGS-VC
12.5
11
'(47$
75
'(47$
"QQSPYNN
"QQSPYNN
¤NN
"QQSPYLH
FGN-0.2 to 50 / FGP-0.2 to 50,100 / FGPX-0.2 to 50,100
FGN-0.2 to 50 / FGP-0.2 to 50,100 / FGPX-0.2 to 50,100 / FGPX-250HB
Force Gauge Stands (Motorized/Manual)
Model
)*6;%/+
Supported models
FGS-50XB-L
FGS-50XB-H
FGJN-2 to 50
FGP-0.2 to 100
FGPX-0.2 to 100
Maximum load
500.0N(50kg)
Dimensional drawing
(mm)
Width 468 x Depth 234 x Height 206mm
100
80
Main unit mounting hole
FGX mounting hole position
3䟺5䟻-ø5.5
57.5
57.5
FGPX . FGP . FGN mounting
hole position 4-ø4.5
4-M8
9
Force gauge
mounting plate
13
48
Right edge
setting dog
35
zForward speed
For low speed: 5 to 120mm/min
For high speed: 20 to 500mm/min
99.5
Force gauge mounting plate
Mounting bolt
Limit switch
Operation panel
206
138
Left edge position
setting dog
zStroke
140mm
Stroke by
motor
140
22.5
19
Free to select force gauge movements, such as
K P H H J O H P S SF U V S O SF Q F U J U J P O B D D P SE J O H U P
measurement purposes and applications
48
FGPX䝿FGP䝿FGN
9
Supports
lenth
meter
Adjustment range
35
Analog
Digital Program
Motored output Overload display setting
Emergency stop
switch
75
FGX
Table dimensions
171
Horizontal specifications selected based on
measurement environment
50
125
100
FGS-50XB-L (Low Speed Specifications)
FGS-50XB-H (High Speed Specifications)
40
Motorized (Horizontal Type)
118
433
116
234
468
Table fixing bolts in 2 places
zMeasurement table
100×125mm
Model
FGS-50H
Maximum load
500.0N(50kg)
Supported models
FGJN-2 to 50
FGP-0.2 to 100
FGPX-0.2 to 100
Dimensional drawing
(mm)
Cable grip
Upper surface drawing
14-M6
Mounting plate
6-4.5 hole
zmark
Stroke
z
150mm
110
82
56
40
Endurance load: 490N
Stroke
: 150mm
Weight
: 15kg
19
75
100
128
64 56.5
57.5 33
Supports
lenth
meter
Can measure loads of up to 500.0N
)FJHIUBEKVTUNFOUJOMFWFMTFWFSZNN
60
80
130
150
ø1
6
89
48 9
0
290
230
28
50
90
562
Enables minimal movement via
handle operation
Height adjustment range
52 to 202 Stroke by handle
99.5
63 (6 levels, every 30mm)
150
22.5
12.5
FGS-50H
Mounting plate
FGX
9.5
Manual Handle Type
Manual
FGP
FGN
196
80
48 9
Width 230 x Depth 290 x
Height 562mm
7-5.5 hole
mark
Measurement table
z
150×145mm
1 handle rotation
z
Approx. 3mm
Specifications
Endurance load
500.0N
)FJHIUTMJEFBEKVTUNFOU
6 levels every 30mm
Stroke
150mm
+PHNPVOUJOHIPMF
.
Weight (main unit)
15kg
12
Force Gauge Stands (Manual)
Model
FGS-5S
Supported models
FGJN-2 to 50
FGP-0.2 to 100
FGPX-0.2 to 100
Maximum load
200.0N(20kg)
Dimensional drawing
(mm)
Upper surface
drawing
Height 320mm
FGC
FGN
9
28
50
90
160
7-5.5 hole
mark
zMeasurement table
150×160mm
320
50
zStroke
50mm
99.5
22.5
Stroke by lever
54
Stopper bolt
20 40.70.100
Can be used horizontally mounted
6-4.5 hole
zmark
Height adjustment range
(3 levels)
Supports
lenth
meter
60
110
82
56
40
Mounting plate
9.5
Manual
6-M6
75
100
128
The most convenient pressing
power test machine
56.5
33
FGS-5S
64
57.5
Manual Lever Type
Mounting plate
FGX
Cable grip
54 9
76
236
316
Specifications
Endurance load
200.0N
3 levels every 30mm
Stroke
50mm
+PHNPVOUJOHIPMF
6-M6
Weight (main unit)
10kg
Model
FGS-50L
Maximum load
500.0N(50kg)
Supported models
FGJN-2 to 50
FGP-0.2 to 100
FGPX-0.2 to 100
Dimensional drawing
(mm)
FGN
FGC
Cable grip
53
17.5
Lever type optimal for speedy
measurement
80
9
14-M6
)FJHIUBEKVTUNFOUJOMFWFMTFWFSZNN
zStroke
60
80
130
150
Stopper bolt
Detailed measurement table
50mm
94
19
53
83
9
63
zMeasurement table
562
Stroke by lever
Adjustment range
50
99.5
84 to 294 (8 levels, every 30mm)
Manual Lever Type
FGS-50L
Mounting plate
FGX
22.5
Height 562mm
150×145mm
290
230
341
Specifications
13
Endurance load
500.0N
MFWFMTFWFSZNN
Stroke
50mm
+PHNPVOUJOHIPMF
.
Weight (main unit)
15kg
zFully equipped with useful functions for tests
Key panel with excellent operation performance.
Indicates distance and speed
Switches between program and
manual operations
Lights up when the upper and
lower limit values are judged
Seal peel test
Bag leakage test
Enlarged photo
Program start and
manual operation
FGS-TV/FGS-5000TV
Analog Overload Digital
display
output
FGT-TV/
FGT-5kTV
Accessories
Compact desktop test stands with high-performance,
advanced functions, combining digital force gauge,
NPUPSTUBOEBOEFYDMVTJWFBEEJOTPGUXBSF'(557
into one set.
*Digital force gauges that are not included in a set are sold
separately.
Maximum loadNote 1)
Supported models
FGS-TV
1000N(100kg)
FGP/FGPX-0.2 to 100
FGS-5000TV
5000N(500kg)
FGP/FGPX-0.2∼100
)*3;++
Note 1) Load values that can actually be measured are up to the rated capacity of the FGP/FGPX to be
mounted.
Dimensional drawing
(mm)
*The values in parentheses ( ) show
dimensions for the FGS-5000TV.
E quipped with various measurement
z
modes as standard:
300
Upper limit dog
Force gauge
zCompression/Tension tests zPeel tests
zDestruction tests
zForce detection tests
zReciprocating tests
4-M8 depth12
M6 depth12
B uilt-in USB port. Can import data by
z
connecting to a PC USB port, and also
perform various operations, such as start,
end, and action selection from a PC.
Emergency stop
switch
Operation panel
Lower limit dog
(130) (80)
95 95
(238)
200
130
60
Program
setting
USB
Model
729 (795)
Motored
Soldering intensity
400
Delivers extensive
performance as a test
machine
*Exclusive jogs are optional
Alarm indication
FGT-TV
470
(600)
320
(350)
19
20
(20)
86
Data Import Software
Specialized for FGS-TV
244
(340)
Measurement table
FGT-TV
Specifications
FGT-5kTV
FGT5kTV
Specialized software attached. Can import
loads and variation data, and display in
HSBQIT%JSFDUMZJNQPSUTEBUBJOUP&YDFM
FGS-57
1000N Note 1)
5000NNote 1)
Forward speed
UPNNNJO
1 to 500mm/min
Stroke
NN
'MFYVSBMSJHJEJUZ
Operation
Displays peel force changes using the specialized
software on a PC (image example)
'(457
Model
Endurance load
Display
Operation part on the main unit
Can operate using the front panel
PC software
$BOTFUBOEPQFSBUFVTJOHUIFTQFDJBMJ[FETPGUXBSF'(557
$BOTFUBOEPQFSBUFVTJOHUIFTQFDJBMJ[FETPGUXBSF'(5L57
Movement speed display
UPNNNJO
1 to 500mm/min
UPNN
Movement distance display
Data import cycle
$BOJNQPSUTFUTPGMPBEBOEEJTUBODFEBUBGPSNBYTFDPOE
Overload input
Stops by force gauge overload signal
Communications
USB1.0
Operation
"650NPEF1FSGPSNTWBSJPVTUFTUPQFSBUJPOTTQFDJGJFECZ1$TPGUXBSF+0(NPEF+PHHJOHPQFSBUJPOBWBJMBCMF."/6NPEF0QFSBUJPOUPUIFMJNJUEPHQPTJUJPOBWBJMBCMF
Measurement table
¤NN
"$7"
Power
Weight
Accessories
¤
UP$/PDPOEFOTBUJPO
35kg
110kg
64#DBCMFN
Note 1) Load values that can actually be measured are up to the rated capacity of the FGP/FGPX to be mounted.
*FGS-TV is supplied as one set from the digital force gauge, motor stand, and measurement software. *Exclusive jogs are optional.
USB cable attached
Exclusive Jogs (optional)
One touch film chuck
Wedge chuck
Model
Pantograph chuck
FGTT-532
Model
FGTT-20-20
Width
20mm
Open width
0 to 2mm
Open width
0 to 5mm
Open width
15mm
Weight
100g
Weight
1.5kg
Weight
200g
Allowable load
200N
Allowable load
5000N
Allowable load
500N
Cam chuck
Model
Flat chuck
FGTT-21
Oblique chuck
Fine point chuck
Model
FGTT-533
Model
FGTT-22-M6
Width
35mm
Open width
0 to 30mm
.BYJNVN
open width
0.5mm
Weight
1.5kg
Weight
30g
Allowable load
5000N
Allowable load
100N
Roulette cam type attachment
-PXFSTJEF
Model
FGTT-23
Model
FGTT-523
Sample width
30mm
Sample width
50mm
Sample thickness
2mm
Sample thickness
NN
Upper side
Model
'(55
Model
'(55
Model
FGTT-26
Open width
1mm
Open width
10mm
Open width
NN
Weight
200g
Weight
1.0kg
Weight
100g
Weight
1.0kg
Weight
150g
Allowable load
500N
Allowable load
2000N
Allowable load
100N
Allowable load
1000N
Allowable load
250N
Rotation type crimped terminal catching attachment Hook for corrugated paper sealing intensity Wire clamp jig
Both vice jig
T-groove surface plate
Model
'(55
Model
'(55
Model
FGTT-25
Model
FGTT-30
Model
FGTT-31
Slit
12
Hook width
60mm
Open width
5mm
Width
NN
Groove length
150mm
Weight
500g
Weight
150g
Weight
500g
Weight
LH
Weight
6.0kg
Allowable load
1000N
Allowable load
250N
Allowable load
500N
Allowable load
1000N
Allowable load
5000N
Model
FGTT-32
Model
FGTT-531
Width
50mm
Width
100mm
Sample width
0 to 50mm
Sample width
UPNN
Vice jig
Leak test jig
Model
GT-30-1
Width
NN
Opening
NN
Pin chuck
Model
Diameter
Weight
15
Solder test jig
Model
'(55
Model
FGTT-10
Stroke
110mm
¤NN
Tray inner
dimensions
¤NN
Mounting plate
dimensions
XY table
movement
amount
Film chuck
1$
6PC-15
ø1 to 1.5mm
1$#
6PC-2B
ø1 to 2mm
"QQSPYH
Bending jig
Weight
12.5mm
Allowable load
Small chuck
LH
150g
500N
Film chuck
Weight
220g
Allowable load
6.2kg
5000N
Wedge chuck
Model
'$
6FC-20
Model
4$
6SC-3
4$
4$
Model
GC-2-5
Model
Width
20mm
Width
3mm
NN
Width
50mm
Width
NN
Opening
2mm
Opening
2mm
3mm
Opening
2mm
Opening
NN
Weight
"QQSPYH
Weight
"QQSPYH
"QQSPYH
Weight
"QQSPYH
"QQSPYH
Weight
GC-50
"QQSPYH
"QQSPYH
Flat model chuck
Winding chuck
Round bar chuck
Model
GC-10-2
Model
($
Width
NN
Width
ø10mm
Diameter
20mm
Opening
ø0.5mm
Weight
"QQSPYH
"QQSPYLH
90º peel jig
"QQSPYH
Weight
"QQSPYH
180º peel test jig
Model
FGTT-12
Test direction
Pulling
Allowable load
500N
Weight
"QQSPYLH
One-sided roller chuck
Model
GC-20
Model
GC-60
Grip diameter
ø0.5 to 5mm
Width
32mm
"QQSPYH
Weight
"QQSPYH
Chuck exclusive for peeling
Model
FGTT-11
Test direction
Pulling
Allowable load
200N
Width
Model
FGTT-15
Grip width
0 to 2mm
50mm
Material
Open width
0 to 2mm
Weight
6QQFSTJEF"QQSPYH-PXFSTJEF"QQSPYLH
Roller chuck
Weight
"QQSPYH
Model
Movement
amount
Upper plate
dimensions
"QQSPYH
Postcard peel jig (upper)
Postcard peel jig (lower)
FGTT-13-UP
Model
FGTT-13-DOWN
Pulling
Test direction
Pulling
Allowable load
20N
Allowable load
20N
Aluminum
Width
150mm
Width
160mm
Endurance load
200N
Open width
1 to 1mm
Open width
0 to 1mm
Weight
60g
Weight
"QQSPYLH
Weight
"QQSPYLH
Aluminum pressing jig
'(5544
'(5544
Model
GC-65
Model
Pulling
Material
Steel
Allowable load
2500N
Test direction
Chuck width
NN
Model
Stainless pressing jig
'(55"6
'(55"6
Material
Aluminum
Pushing
Test direction
1000N
Allowable load
&YUFSOBM
diameter
Weight

ø60
"QQSPYH
"QQSPYH
Model
'(55464
Stainless
Pushing
Test direction
Pushing
1000N
Allowable load
&YUFSOBM
diameter
Weight

ø60
"QQSPYH
"QQSPYH
For digital force gauges of 5N or less, the measurement adapter mounting

bolt is M4.
t8IFOVTJOH.TFMFDUUIFNPEFMTPGNFBTVSFNFOUBEBQUFSTTIPXOJOQBSFOUIFTFT
t'PSPUIFSNPEFMT.JTBQQMJFE
'(55464
Material
Force gauge mounting side
FGPX-1 to FGPX-100
FGP-1 to FGP-100
FGJN-2 to 50
The models in parentheses support FGPX0.5 and FGP-0.5 or less.
±30mm
¤NN
Model
Test direction
Supported models

GT-20-3
Test direction
Steel pressing jig
Allowable load
&YUFSOBM
Open width
0 to 3mm
diameter
6QQFSTJEF"QQSPYH-PXFSTJEF"QQSPYH
Weight
Weight
X-Y table
1000N
ø5
ø10
"QQSPYH
"QQSPYH
Stand mounting side
#FTJEFTUIFBCPWFJUFNTDVTUPNJ[FEKJHTBOE
UFTUNBDIJOFTDBOCFNBEFVQPOSFRVFTU'PS
details, contact us.
For high load (M10), contact us.

16
Application
Force Gauge Stand Applications
Bag seal opening force check
Straw pulling force
Soldering intensity
Rubber pulling force
Crimp force check of crimped terminals
Fiber pulling force
Plastic bag press force
Food stuff hardness
Sealed (lid) peel force
Wrapping adhesion peel force
Corrugated board bonding peel force
For various "force"
measurements
necessary for quality
management
Digital Tension Meters
Guide roller
(1) DIP switch cover
(DIP switch)
Wire guide
(3) Store switch
Set memory mode, display time, data output, and
wire type
Sensing roller
Use when recalling the maximum/minimum values,
and memory data.
(4) Wire type change switch
Select TEX (thread) or WIRE (steel, copper) based
on the wire type
(2) Guide roller slide knob
(7) Memory data output switch
Output data when connecting to a PC or printer.
(5) Field adjustment switch
Use when pinching the measuring wire
(A supporting lever can be installed)
LCD display
(6) Recall switch
Use when storing data
Increase/decrease, and correct the display value
(1)
(2)
(3)
Model
DTMX-0.2C
DTMB-0.2C
DTMX-0.5C
DTMB-0.5C
DTMX-1C
DTMB-1C
DTMX-2C
DTMB-2C
DTMX-2.5C
DTMB-2.5C
DTMX-5C
DTMB-5C
(4)
(5)
(6)
Power switch
Connector for output
*The photo shows the DTMX-C Series model.
Hand Held Model Digital Tension Meters
High-Performance Type (with output)
DTMX Series
General purpose type (without output)
D/
200.0g
D/
500.0g
D/
1000g
D/
2000g
D/
2500g
D/
5000g
Model
DTMX-10C
DTMB-10C
DTMX-20C
DTMB-20C
.BYJNVNMPBE
EaN
10.00kg
EaN
20.00kg
Note that the standard calibration covers
customer speciﬁed special wires.
Dimensional drawing
DTMB Series
(mm)
76
65
38*1
50
The hand held model Digital Tension Meters that can be used in high level measurement
environments, such as recording, statistics processing, and PC management
Mounting hole 2-M5
depth 4 (Pitch 50)
45
80
zThrough RS-232C, digimatic output, and analog output, enables
management of measurement values in PCs and printers (DTMXC Series)
23
ø12
ø16
19*2
48
Applicable to high level measurement
environments
13*2
(7)
.BYJNVNMPBE
53
275
zCan store up to 100 sets of measurement data in memory. In
addition, enables automatic statistics processing of maximum/
minimum values and average value by connecting to compatible
printers
153
192
zEnables measurement of up to 5 wire types in one unit
((1) Thread (2) Steel wire (3) Copper wire, as well as 2 types of sample wires)
*1 Dimensional drawings differ depending on the model.
DTMX(B)-0.2C to 2C: 38mm
DTMX(B)-2.5C to 10C: 100mm
DTMX(B)-20C: 150 or 200mm
zActualizes a high accuracy of ±1%R.C.
(DTMX-0.2C, 0.5C/DTMB-0.2C, 0.5C)
zAdopts an aluminum case that has resistance to impacts and
static electricity
37
40
*2 DTMX(B)-0.5C/2C/5C/10C/20C: 13mm
DTMX(B)-0.2C/1C/2.5C: 19mm
Specifications
High-performance type (with output)
General purpose type (without output)
Model
Measurement
wire Note 2)
Thread
Steel wire
Copper wire
Roller span
Roller
Accuracy (when the measurement wire is static)
Measurement time
DTMX-C
Memory
DTMB-C
.BYJNVNTQFFE/PUF
'JFMEBEKVTUNFOU
Display
Analog output
Output signal
(DTMX-C)
Digital output
Operating temperature/humidity
Power
Outer shape
Dimensions
Wire guide
Weight
Accessories
"QQMJDBUJPOFYBNQMFT
FYDMVEJOHTUBOEBSE
measurement wires)
DTMX-0.2C
DTMB-0.2C
D/H
0.0 to 200.0cN
1000デニール以下
もしくはø0.15以下
PSMFTT
ø0.15 or less
DTMX-0.5C
DTMB-0.5C
D/H
UPD/
DTMX-1C
DTMB-1C
D/H
100 to 1000cN
DTMX-2C
DTMB-2C
D/H
200 to 2000cN
DTMX-2.5C
DTMB-2.5C
D/H
250 to 2500cN
DTMX-5C
DTMB-5C
D/H
500 to 5000cN
DTMX-10C
DTMB-10C
EB/LH
1.00 to 10.00daN
DTMX-20C
DTMB-20C
EB/LH
2.00 to 20.00daN
Performs special
calibration if sample
wires are provided by
customers. Note 3)
150mm . 200mm
ø0.05 to ø0.25
UP
UP
UP
ø0.5 to ø1.2
UP
ø0.01 to ø0.15
ø0.05 to ø0.25
ø0.05 to ø0.25
UP
UP
ø0.3 to ø0.6
UP
ø0.3 to ø0.6
UP
UP
100mm
UP
UP
NN
ø12, Hard coat aluminum
±1%R.C.
±1.5%R.C.
BOETFDPOETTFMFDUBCMF
'JOBMNFBTVSFNFOUWBMVFNBYJNVNWBMVFNJOJNVNWBMVFQFBLWBMVFTFUTPGNFBTVSFNFOUEBUBNFNPSZCBDLVQVTJOHCBUUFSZ
TUBUJTUJDTEBUBNote 5)
'JOBMNFBTVSFNFOUWBMVFNBYJNVNWBMVFNJOJNVNWBMVFQFBLWBMVF
1000m/min
.BYPGSFBEJOHQFSOPUDI
EJHJU-$%'POUIFJHIUNN
UP7%$GPSBWBJMBCMFEJTQMBZSBOHF
%"PVUQVUDPOWFSTJPOUJNFBQQSPYNTFD3FTPMVUJPODBQBDJUZ
-PBESFTJTUBODFLüPSNPSF
RS-232C or Digimatic (selectable)
UP$3)PSMFTT
""ESZDFMMCBUUFSZYDPOUJOVPVTVTFGPSBQQSPYIPVSTVTJOHBMLBMJCBUUFSZ
PS"$BEBQUFSPQUJPOBM
Width 65mm
"QQSPYLH
"QQSPYH
""ESZDFMMCBUUFSZYDBSSZJOHDBTF
r'MFYJCMFUISFBE
r(PMEBOETJMWFSUISFBETPG
ø0.15 or less
r$PBUFEPQUJDBMGJCFS
r4ZOUIFUJDGJCFSXJOEFS
r0QUJDBMGJCFS
r0QUJDBMGJCFSHBUIFSJOH
machine
r$BSCPOGJCFS
r$PQQFSXJOEFS
r4UFFMXJSFHBUIFSJOHNBDIJOF
r"SBNJEGJCFS
r'JMNGPSDPOEFOTFST
r'PPEGJMN
r#SBTTXJSFPGPSMFTT
r$PQQFSXJOEFS
r.BHOFUJDUBQF
r$BSCPOGJCFS
r.BUFSJBMUIBUQBSUJDVMBSMZ
r$BSCPOGJCFS
r4UFFMXJSFPGPSMFTT
SFRVJSFTBTNBMMCFOEJOH
r.FBTVSJOHUBQF
r$PQQFSGPJMGPSFMFDUSJDXJSFT angle
NNXJEFYU
XJEUIYU
r4UFFMXJSFGPSPGGJDF
r5JSFDPEF
automation (copy machines,
and printers, etc.)
Note 2) Our standard calibration wires are as follows:
Thread: Nylon string, Steel wire: SUS304 (Hardness Hv531 to 541), Copper wire: Tinning soft copper wire (Hardness Hv69 to 82)
If measurement objects are subject to vibration, or the material may change, such as with rubber, we cannot guarantee the display accuracy. Contact us in advance.
Note that using outside of specifications may result in measurement error.
Note 3) Some wire materials cannot be accepted. Contact us in advance.
Note 4) We cannot guarantee wear of the roller, influence on measurement wire (winding, etc.), or accuracy.
r5VOHTUFOXJSFPGPSMFTT r$VTUPNFShTTBNQMFXJSF
r'MBUPSUJNJOHCFMUPGNN
or less in width
Note 5) Statistics data
Number of samples (DATA) : in
Maximum value (MAX) : Xmax
Minimum value (MIN) : Xmin
Average value (AVG) : ∑Xi/n = x
Standard deviation (DEV) : ∑(Xi-x)/n
Analog Tension Meters
Model
Measurement range
ZF2-5
1 to 5cN 1.020 to 5.099g
ZF2-10 1 to 10cN 1.020 to 10.20g
ZF2-20 2 to 20cN 2.039 to 20.39g
ZF2-30 3 to 30cN 3.059 to 30.59g
ZF2-50 5 to 50cN 5.099 to 50.99g
ZF2-100 10 to 100cN 10.20 to 102.0g
Guide roller
Measurement roller
Trigger
Dimensional drawing
(mm)
32
21
17 (Both width roller stroke)
ø7
ZF2 Series
Analog tension meters capable of low tension
measurement
ø10
23
Hand Held Model for Low
Tension Measurement
Analog Tension Meters
158
6
6 types in the series cover from MAX.1 to
z
5cN for ultra-low tension to 100cN
Simple measurement by just pressing the
z
trigger and pinching the measurement wire
between the measurement roller and guide
roller
S lim, measuring (230g), and compact
z
design for operation performance
127
18
Specifications
Model
Rated capacity (R.C.)
ZF2-5
ZF2-10
ZF2-20
ZF2-30
ZF2-50
ZF2-100
1 to 5cN
1 to 10cN
2 to 20cN
3 to 30cN
5 to 50cN
10 to 100cN
UPH
(1.020 to 10.20g)
UPH
UPH
UPH
(10.20 to 102.0g)
Note 1)
5ISFBENNPSMFTT
Measurement wire
Roller span
22mm
Roller
Hard coat aluminum
Accuracy
±1%R.C. or ±1 scale
Speed Note)
."9NNJO
Operating temperature
UP$
Operating humidity
PSMFTT
Casing material
Delrin
&YUFSOBMEJNFOTJPOT
Weight
"QQSPYLH
Accessories
Carrying case
Note 1) R.C. = RATED CAPACITY *We cannot guarantee wear of the roller, influence on measurement wire (winding, etc.), or accuracy.
Pulling/Pushing
Amplifier Built-in Model Load Cells
PLC Series
Amplifier Built-in Model Load Cells
for High Load
VLC Series
PLC Series
With +10V rated output, it can directly connect to the display, or
z
programmable controller, etc.
Overload protection device makes overload capacity twice as high
z
as rated load
(PLC-100K's overload capacity tripled)
Equipped with span, zero, and tare adjustments
z
Simple connection Free built-in or stand-alone installation
z
VLC Series
With +10V rated output, it can directly connect to the display, or
z
programmable controller, etc.
Width 95 x Height 99 x
Thickness 42mm
Compact design applied for built-in, stand-alone installation, and
z
hanging with space saving
Equipped with span, zero, and tare adjustments
z
Width 95 x Height 70 x Thickness 40mm
Simple connection
z
Model
PLC-0.2KD
PLC-0.5KD
PLC-1KD
PLC-2KD
PLC-5KD
PLC-10KD
PLC-20KD
PLC-50KD
PLS-100KD
5DWHGFDSDFLW\5&
±1.961N
±200g
s1
±500g
s1
±1kg
±19.61N
±2kg
s1
±5kg
s1
±10kg
±196.1N
±20kg
s1
±50kg
s1
±100kg
Model
VLC-200K
VLC-500K
VLC-1000K
5DWHGFDSDFLW\5&
±2kN
±203.9kg
±5kN
±509.9kg
±10kN
±1020kg
Tension Meters
Model*2
PLS-0.2KPLS-0.5KPLS-1KPLS-2KPLS-5KPLS-10K-
Rated tension
1.961N
0.2kg
1
0.5kg
1
1kg
19.61N
2kg
1
5kg
1
10kg
Sample wires are necessary for calibration
Dimensional drawing
(mm)
35
40
15
Note 2
80
zApplicable measurement objects
109
2
44.5
6
120
Tension detector for
tapes, films, and belts,
appropriate for control
zTapes (paper, cloth, plastic, wrap, porcelain)
zFilms (for VTR, condenser)
zNon-threaded materials
zMetal foils
20
4.8
RollerMaterial :
Stainless
35
5
130
100
Note 1
(2) (3)
15
44.5
2
49
6
111
(1)
Roller width
Note 1) Note 2)
10
1
15
3
20
5
30
10
129
PLS-K--C
112
124
PLS- K-3- C
5K to 10K
ø20
ø26
E asy to mount to various equipment/
z
devices
91.5
5
The width of measurement objects should be
z
equal to, or less than the roller width (10, 15,
20, 30mm), and 0.2 mm thick or less
W ith +10V rated output, it can directly
z
connect to control devices
5
70
50
Note 1
39
PLS-K--C Series
Roller width
Note 1) Note 2)
10
0
15
0
20
2
30
7
ø13
ø17
Stand Alone Type Tension Meters for
Tapes, Films, and Belts
4.8
PLS- K-2- C
0.2K to 2K
Note 2
80
(1) Rated tension
(2) Bracket shape
(3) Roller width
39
20
91.5
5
112
124
RollerMaterial :
Stainless
Specifications
Model
.FBTVSFNFOUPCKFDUNote 2)
1-4,
1-4,
1-4,
1-4,
1-4,
/
/
/
/
/
/
(0.2kgf)
(0.5kgf)
(1kgf)
(2kgf)
(5kgf)
(10kgf)
7KHZLGWKVKRXOGEHHTXDOWRRUOHVVWKDQWKHUROOHUZLGWKPPDQGPPRUOHVVWKLFN
8JSFTQFFENBY
Note 3)
300m/min
Detection roller displacement
0$;PPLQUDWHGWHQVLRQ
Roller shape
ºPPF\OLQGHUUROOHU:LGWKPP
Roller span
Measurement accuracy (when the
measurement wire is static) /PUF
50mm
ºPPF\OLQGHUUROOHU
100mm
±1%/R.O.
2YHUORDGFDSDFLW\
200%/R.C.
Rated output (R.O.) Note 5)
DC10V
,QSXWSRZHUVXSSO\
'&9WRY$'&9RU'&9DYDLODEOHLIVSHFLILHG
&DEOHOHQJWK
Weight
1-4,
2m
$SSUR[J
Protection structure
1kg
IP52
Note 2) Our standard calibration wires are as follows: Without sample wires, one of the specified types will be used.
Thread: Nylon wire, Steel wire: SUS304 (Hardness Hv531 to 541), Copper wire: Tinning soft copper wire (Hardness Hv69 to 82)
Note 3) We cannot guarantee wear of the roller, influence on measurement wire (winding, etc.), and accuracy.
Note 4) We may not guarantee accuracy depending on measurement object properties. Contact us in advance.
Note 5) It may change depending on measurement object properties.
20
Model*2
PLS-0.2KPLS-0.5KPLS-1KPLS-2KPLS-5KPLS-10K-
Rated tension
1.961N
0.2kg
1
0.5kg
1
1kg
19.61N
2kg
1
5kg
1
10kg
Sample wires are necessary for calibration
Dimensional drawing
(mm)
4.8
PLS-K-2-12B
(0.2 to 2K)
35
Stand Alone Type General
Purpose Tension Meters
5
70
50
15
zCopper wire
zThread
zPlastic wire
zFlexible wire
91.5
5
Roller material:
Hard coat aluminum
112
124
2
44.5
PLS-K-322B
(5K to 10K)
35
5
4.8
W ith +10V rated output, it can directly
z
connect to control devices
E asy to mount to various equipment/
z
devices
6
39
zPiano wire
zElectric wire
zGold, silver threads
zCommunication wire
80
zNylon wire
zSteel wire
zStainless wire
120
20
zApplicable measurement objects
40
ø12
High accuracy tension detector
appropriate for control
ø15
8 R1
109
PLS-K--B Series
PLS-K--B
130
100
10
R2
44.5
49
2
6
39
80
20
111
(1) Rated tension
(2) Bracket shape
(3) Roller diameter
129
ø22
(2) (3)
ø26
(1)
15
5
91.5
Roller material:
Stainless (soft nitriding)
112
124
*1 We cannot guarantee wear of the roller, influence on measurement wire (winding, etc.), and
accuracy.
*2 For information about 20K, 50K, and 100K, contact us.
zNote 1) R.C.=RATED CAPACITY
zD/H/
z1daN = 10N 1.02kg (1kg /EB/
Specifications
Model
1-4,
1-4,
1-4,
1-4,
1-4,
/
/
/
/
/
/
ø0.15 or less
ø0.25 or less
PSMFTT
PSMFTT
ø1.2 or less
PSMFTT
Thread
Measurement
PCKFDUNote 2)
Steel wire
PSMFTT
ø0.15 or less
ø0.25 or less
PSMFTT
PSMFTT
PSMFTT
Copper wire
ø0.15 or less
ø0.25 or less
PSMFTT
ø0.6 or less
ø1.0 or less
ø1.2 or less
8JSFTQFFENBY
Note 3)
1000m/min
Detection roller displacement
MAX. 0.3mm/At rated capacity (R.C.)
Roller shape
NN7HSPPWFSPMMFS
Roller span
50mm
Input power supply
Weight
NN7HSPPWFSPMMFS
100mm
%$7
Rated output (R.O.) /PUF
Measurement accuracy (when the
measurement wire is static) Note 5)
Allowable overload
±1%/R.O.
200%/R.C.
%$7UP7
"%$7PS%$7BWBJMBCMFJGTQFDJGJFE
"QQSPYH
Protection structure
Note 2) Our standard calibration wires are as follows: Without sample wires, one of the specified types will be used.
Thread: Nylon wire, Steel wire: SUS304 (Hardness Hv531 to 541),
Copper wire: Tinning soft copper wire (Hardness Hv69 to 82)
Note 3) We cannot guarantee wear of the roller, influence on measurement wire (winding, etc.), and accuracy.
Note 4) It may not be possible to guarantee accuracy depending on measurement object properties. Contact us in advance.
Note 5) It may change depending on measurement object properties.
21
1-4,
1kg
IP52
Download Software
You can download data import software free of charge from our website.
Access the NIDEC-SHIMPO website
Click "Products"
Select "Product Category" and click
Select the product in use and click
4
Select "Software Download" and click
CORPORATE OFFICE
1 Kotari-Terada, Nagaokakyo-city Kyoto, 617-0833, Japan
TEL. +81-75-958-3777 FAX. +81-75-958-3888
NIDEC-SHIMPO AMERICA CORPORATION
1701 Glenlake Avenue Itasca, IL60143 USA
TEL.+1(630)924-7138 FAX.+1(630)924-0342
NIDEC-SHIMPO (ZHEJIANG) CORPORATION
#288 Pingcheng Road, Pinghu Economic Development Zone, Zhejiang, China
TEL.+86(573)85098651 FAX.+86(573)85098129
NIDEC-SHIMPO(SHANGHAI) INT'L TRADING CO.,LTD.
Unit 1201-1216, Tower B, 100 Zunyi Road, Chang Ning District, Shanghai 200051, China
TEL.+86(21)64400700 FAX.+86(21)64400703
TEL.+86(21)68756117 FAX.+86(21)68751017
NIDEC-SHIMPO(H.K.)CO.,LTD.
Unit2607-11, Tower2, Metroplaza223 Hing Fong Rood Kwai Chung, New Territories, Hong Kong
TEL.+86(852)24816116 FAX.+86(852)24816115
NIDEC-SHIMPO TAIWAN CORPORATION
Rm.1, 14F., No925, Sec.4, Taiwan Boulevard, Xitun Dist., Taichung City 40767, Taiwan(R.O.C)
TEL.+886-4-2358-2628 FAX.+886-4-2358-9928
NIDEC-SHIMPO KOREA CORPORATION
#806 (Kolon sciencevally II, Guro-dong) 55, Digital-ro 34-gil, Guro-gu, Seoul, SEOUL 152-728 KOREA
TEL.+82-2-2038-3537 FAX.+82-2-2038-3538
NIDEC-SHIMPO INDIA MANUFACTURING PRIVATE LIMITED
BVR LAKE FRONT, No. 40/32/50/1/2, NAGAVARA VILLAGE, KASABA HOBLI, NEAR RING ROAD,
VEERANNAPALYA, ARABI COLLEGE POST, BANGALORE -560 045.
TEL.+91-80-4953-6579
NIDEC-SHIMPO DO BRASIL PARTICIPAÇÕES LTDA
Rua Amazonas, 363, cj. 106, Centro São Caetano do Sul – SP
TEL.+55-11-4221-4834
HP
http://www.nidec-shimpo.co.jp/en/
Main Line of Business
Variable reducers, Pressing machines,
Electric instruments, Controllers/Precision
instruments, Ceramics
This catalog is as of February, 2015.
Product appearance and specifications
are subject to change without notice due
to continual improvements.
Before using the product, please
read through the instruction manual
carefully and follow it for proper use.
WA-1502000