New Market Group
Transcription
New Market Group
244 Spot Marker Fugitive Marker With another first in the industry, Aervoe brings to market a revolutionary, patented coating that is specially formulated to disappear with UV exposure. It is ideal for use in visually sensitive areas with the mark progressively fading from a vivid fluorescent to a clear film in 30 to 35 days. CAN SIZE (NET) WEIGHT CASE PACK 20-oz. Aerosol (15-oz.) 16 lbs. 12 cans CAN SIZE (NET) WEIGHT CASE PACK 20-oz. Aerosol (15-oz.) 16 lbs. 12 cans COLOR SELECTION 214 Blue Chalk 215 White Chalk 216 Red Chalk COLOR SELECTION 1420 Fl. Red 1422 Fl. Orange 217 Orange Chalk 218 Yellow Chalk 219 Green Chalk NET WEIGHT 2 lbs. NET WEIGHT 4 lbs. CASE PACK 1 Each CASE PACK 1 Each A complete line of paints, specialty coatings, applicators, and measuring devices that are made specifically to meet a variety of marking requirements. The American Public Works Association (APWA) requires public agencies, utilities, and contractors that excavate underground to use this color standard to identify the location and type of sub-surface utilities. Aervoe Industries was the first marking paint manufacturer to provide the uniform standard for these colors, and our products still proudly carry the original One-Call Systems International trademark. SUPREME CH ALK E TIV SUPRE M E TU R F Aervoe chalks are a special blend of raw materials that are safe on all surfaces, and are designed specifically for temporary marking. Mark disappears in 10 – 20 days when exposed to water, traffic, and other abrasions. It can also be washed off with a pressure washer if desired. 286 Measuring Wheel 245 Marking Stick CASE PACK 1 Each FU GI Spray Chalk NET WEIGHT 1 lb. 295, 296 1426 Fl. Yellow 1429 Fl. Pink 200 Clear Coat This upside-down clear coating is used to seal and protect construction chalk lines and other temporary marks from wind, moisture, and traffic. CAN SIZE (NET) WEIGHT CASE PACK 20-oz. Aerosol (15-oz.) 16 lbs. 12 cans Invert-A-Cap® MARKING PRODUCT The ultimate writing tool in inverted marking paint. Use where controlled applications (letters and numbers) are needed in addition to lines. Best positive delivery cut off and non-clogging performance with the least possible tip paint build-up. CAN SIZE (NET) WEIGHT 16-oz. Aerosol (12-oz.) 14 lbs. COLOR SELECTION Regular 261 Red 262 Yellow 263 Blue Fluorescent 270 Fl. Red 272 Fl. Orange 274 Fl. Green INITIAL VISIBILITY CASE PACK 12 cans Blue 203, 214, 254, 263, 290, 1383 Green 204, 219, 259, 1384 Black 206, 251, 1380 White 207, 215, 255, 267, 291, 1387 Light Blue 209 Silver 210 Purple 212, 260 H.D. Red 281 H.D. Yellow 282 Utility Yellow 295 APWA Yellow 296 Fl. Green 224, 248, 274, 1391 Fl. Yellow 226, 253, 1393, 1426 Fl. Blue 227, 250, 1394 Fl. Pink 229, 249, 279, 1399, 1429 Fl. Red-Orange 230, 283, 275, 1395 Fl. Orange 222, 247, 272, 1392, 1422 The printed colors on these pages approximate the appearance of the actual paint colors. LINEAR COVERAGE* APPLICATION Survey, landscape, utility/locator, construction, and proposed excavation. Utility/locator, survey, landscape, construction, and proposed excavation Utility/locator, construction, and proposed excavation. Proposed excavation, construction, landscape, utility/locator, and survey marking. Landscape and utility/locator marking on turf surfaces (water based). Best Superior 6 months Excellent 3.2 g/sec 480’ Supreme Utility Marking Paint Best Superior 6 months plus Superior 3.2 g/sec 510‘ Construction Marking Paint Better Excellent 3 months Excellent 3.2 g/sec 420’ All Purpose Marking Paint Good Good 2 months Good 3.2 g/sec 380‘ Turf Marking Paint Best Good 2 months Excellent 3.2 g/sec 400’ Invert-A-Cap Better Excellent 3 – 4 months Excellent 2.6 g/sec 350’ Spray Chalk Good Fair 10 – 20 days Poor 2.9 g/sec 350’ Fugitive Marker Good Good 30 – 35 days Fair 2.9 g/sec 350’ Clear Coat Good Good 60 days Good 2.9 g/sec 500’ Hi-Vis Yellow 208, 258, 296 Green-Out Excellent Excellent 6 - 8 weeks Excellent 6 g/sec 30 sq. ft. *Coverage varies depending on width of mark and hide desired. Fluorescent Color Selection Fl. Red 220, 246, 270, 1390, 1420 DELIVERY RATE SPECIALTY MARKING COATINGS 275 Fl. Red-Orange 279 Fl. Pink Yellow 202, 218. 252, 262, 293, 295, 1382 DURABILITY Survey Marking Paint 265 Orange 267 White Red 201, 214, 256, 261, 292, 1381 MARK PERFORMANCE MARKING PAINTS Regular Color Selection Orange 205, 217, 257, 265, 1385 QUALITY H.D. Fl. Orange 288 AERVOE INDUSTRIES INCORPORATED Gardnerville, NV 89410 1-800-227-0196 • www.aervoe.com © 2011 Aervoe Industries Incorporated. All rights reserved. Nidus 2/11 Distributed by: Inverted marking paint best for writing tool and controled spray. Survey, landscape, utility, construction, and proposed excavation. Self destructs or washes off with water. Utility/locator, landscape, construction, and proposed excavation. UV sensitive, fades with exposure to sun. Seal and protect chalk lines and other temporary marks. Temporarily covers up brown spots on grass PO CT SE N CO ST RU ION A LL R U P SURVEY HIGH SOLIDS FORMULAS • MORE LINEAR FEET PER CAN • HIGHLY VISIBLE MARKS EXCELLENT COLOR RETENTION FOR EASY IDENTIFICATION INDUSTRY STANDARD FOR APWA UNDERGROUND MARKING COLORS Survey Marking Paint Aervoe’s Survey Marking Paint is a superior upside-down marking paint that is designed for survey marking. It provides the best quality paint in terms of color visibility and retention, durability, and a lasting mark of up to six months. Survey Marking Paint contains a non-freezing formula, operational to 14°F (–10°C). CAN SIZE (NET) WEIGHT 20-oz. Aerosol (17-oz.) 18 lbs. Gallon Can (Stake Dip) 22 lbs. COLOR SELECTION Regular 201 Red 202 Yellow 203 Blue 204 Green 205 Orange 206 Black 207 White Fluorescent 220 Fl. Red 222 Fl. Orange 224 Fl. Green 226 Fl. Yellow CASE PACK 12 cans 2 gallons 208 Hi-Vis Yellow 209 Light Blue 210 Silver 212 Purple 281 H.D. Red 282 H.D. Yellow 227 Fl. Blue 229 Fl. Pink 230 Fl. Red-Orange 288 H.D. Fl. Orange Construction Marking Paint Aervoe Construction Marking Paint is the flagship of the line, offering a high quality paint that is priced competitively to meet a variety of marking applications while providing good color visibility and durability. Why pay for the added quality of Aervoe Survey Marking Paint if the mark does not need to last as long? Great color durability up to three months. CAN SIZE (NET) WEIGHT 20-oz. Aerosol (17-oz.) 18 lbs. COLOR SELECTION Regular 251 Black 252 Yellow 254 Blue 255 White 256 Red Fluorescent 246 Fl. Red 247 Fl. Orange 248 Fl. Green 249 Fl. Pink Turf Marking Paint This patented (5,128,609), water-based formulation is made specifically for marking on turf surfaces. It will not damage or burn grass roots. Provides a mark that will last up to two months, but can be cut off after the grass has grown out. CAN SIZE (NET) WEIGHT 20-oz. Aerosol (17-oz.) 18 lbs. CASE PACK 12 cans COLOR SELECTION 290 Blue 291 White 257 Orange 258 Hi-Vis Yellow 259 Green 260 Purple CASE PACK 12 cans 292 Red 293 Yellow 250 Fl. Blue 253 Fl. Yellow 283 Fl. Red-Orange H.D. = (High Delivery) 30% greater than other colors. Supreme Utility Marking Paint Supreme Utility Marking Paint provides superior quality in terms of initial color brightness, color retention, adhesion, durability, and color consistenty. It is uniquely designed for identifying utilities under pavement, gravel, and soil with a formula that has maximum durability, dries within 2–5 minutes, and won’t freeze. CAN SIZE (NET) WEIGHT 20-oz. Aerosol (17-oz.) 18 lbs. COLOR SELECTION 295 Utility Yellow 296 APWA Yellow CASE PACK 12 cans All Purpose Marking Paint This good, all purpose paint is an economically priced marking paint that is designed to provide a very cost-effective approach to marking and still provide good visibility in the two-month range. CAN SIZE (NET) WEIGHT 20-oz. Aerosol (15-oz.) 16 lbs. CASE PACK 12 cans COLOR SELECTION Regular 1380 Black 1381 Red 1382 Yellow 1383 Blue 1384 Green 1385 Orange 1387 White Fluorescent 1390 Fl. Red 1391 Fl. Green 1392 Fl. Orange 1393 Fl. Yellow 1394 Fl. Blue 1395 Fl. Red-Orange 1399 Fl. Pink Green-Out Cover Coating This coating provides up to 6 – 8 weeks of temporary cover-up of brown spots on grass. It’s the low cost answer to off-season “green.” Green-Out has a quick 5-minute dry time and easy clean-up. CAN SIZE (NET) WEIGHT 20-oz. Aerosol (18-oz.) 19 lbs. Gallon Bottle 27 lbs. COLOR SELECTION 4750 Green-Out Cover Coating CASE PACK 12 cans 2 gallons Ultimate Corrosion Protection Available in Low VOC (7007VG <100 g/l & 7008VG <250 g/l) #7007 • 97% Pure zinc powder • 93% Dry film zinc • Meets multiple MIL, DOD, and ASTM specs • High solids coating for superior protection against corrosion • Withstands 2000 hours 5% salt spray exposure • Superior coverage and fast dry time #7008 • 97% Pure zinc flake • 65% Dry film zinc • Meets ASTM A780 • Excellent coating for repairs and touch-up of hot-dip parts • Superior high solids and corrosion prevention • Withstands 500 hours 5% salt spray Uses: Structural steel, automotive, chain link fences, guard rails, and many other industrial applications. Part No. Description 7007HP 7007 7007Q 7007G 7007VG 7008 7008Q 7008G 7008VG Cold Galvanize Coating 93% Zinc Rich (1⁄2 pint) Cold Galvanize Coating 93% Zinc Rich (aerosol) Cold Galvanize Coating 93% Zinc Rich (quart) Cold Galvanize Coating 93% Zinc Rich (gallon) Low VOC Cold Galvanize Coating 93% Zinc Rich (gallon) Brite Galvanize Coating 65% Zinc Rich (aerosol) Brite Galvanize Coating 65% Zinc Rich (quart) Brite Galvanize Coating 65% Zinc Rich (gallon) Low VOC Brite Galvanize Coating 65% Zinc Rich (gallon) Case Pack Case Wt. Case Dimensions UPC 12 12 4 1 1 12 4 1 1 20 14 12 24 20 14 12 11 20 11 ⁄4” x 9” x 3” 103⁄4” x 81⁄8” x 81⁄8” 81⁄2” x 81⁄2” x 111⁄4” 7” x 7” x 71⁄8” 7” x 7” x 71⁄8” 103⁄4” x 81⁄8” x 81⁄8” 81⁄2” x 81⁄2” x 111⁄4” 7” x 7” x 71⁄8” 7” x 7” x 71⁄8” 0 88193 07006 2 0 88193 07007 9 0 88193 27007 3 0 88193 17007 6 0 88193 47007 7 0 88193 07008 6 0 88193 17008 3 0 88193 27008 0 0 88193 47008 4 3 Aervoe Industries, Inc. • 1100 Mark Circle • Gardnerville, NV 89410 • 800-227-0196 • www.aervoe.com MRO Chrome Galvanize Coating (143) • Repair hot-dip galvanizing to ferrous and non-ferrous surfaces • Produces a reflective metallic sheen • Made with 10% zinc Used on equipment and surfaces where less zinc protection is accepted, versus a high chrome finish. MRO Cold Galvanize Coating (147) • 97% Pure zinc powder • 93% Dry film zinc • Meets MIL and ASTM specs • One-coat cost-effective solution • Multiple coats for longer-term protection • Can be used as a weld-through primer MRO Brite Galvanize Coating (148) • 97% Pure zinc flake • 65% Dry film zinc • Meets ASTM A780 • Restores surface to bright look of hot-dip • Stops rust and corrosion • Intermediate bright zinc protection during the industrial fabrication process and storage • One-coat cost-effective solution • Multiple coats for longer-term protection Part No. Description Case Pack Case Wt. Case Dimensions UPC 143 MRO Chrome Galvanize Coating 12 14 10 ⁄4” x 8 ⁄8” x 8 ⁄8” 0 88193 00143 1 147 MRO Cold Galvanize Coating 12 13 103⁄4” x 81⁄8” x 81⁄8” 0 88193 00147 9 148 MRO Brite Galvanize Coating 12 13 103⁄4” x 81⁄8” x 81⁄8” 0 88193 00148 6 3 1 1 Distributed By Aervoe Industries, Inc. • 1100 Mark Circle • Gardnerville, NV 89410 • 800-227-0196 • www.aervoe.com © 2012 Aervoe Industries, Inc. • Nidus-4/6/12