product catalogue

Transcription

product catalogue

product catalogue
Camfil Farr Air Filter Products and Services
Air Filtration Solutions
Camfil Farr – clean air solutions
Dear Customers,
I am pleased to present to you this latest edition of the Camfil Farr air filter
solutions catalogue. We have made every effort to make it more practical and
fully comprehensive. We are also making it available to you in the form of the
enclosed CD-Rom.
The catalogue contains up to date information and technical performance
data on our range of air filtration products. This issue also contains summary
information of the various test standards that need to be considered when
making your selection. We have also included an application guideline section
which will enable you to quickly identify the correct air filter for your application.
All HEPA filters are
individually tested to
EN 1822
Camfil Farr are the world leader in providing air filtration solutions and the
product range includes many world class benchmark filters. In addition to
providing a comprehensive range of quality products, we at Camfil Farr believe
that service is of paramount importance. In today’s fast moving industries the
ability to get goods to where they are needed quickly and correctly is vital.
To ensure that our “right first time” service matches our “best in class” products
we are developing our logistics and expanding our fleet of dedicated delivery
vehicles. This unique service will ensure that your goods arrive where you want
them, when you want them. Finally, I would strongly recommend that you visit
the www.camilfarr.co.uk website where you can access much more detailed
information about our products and services, and the latest news on our
“CLEAN AIR SOLUTIONS”.
Enjoy your reading
Bill Wilkinson
Managing Director
62 Bd de
Advanced fabrication
capability
K
RL
APE : 748
ANY SC
- Code
COMP
363 460
ATION
is B 393
RTIFIC
NT CE
RCS Par
EUROVE is FRANCE 03 Par
iploma
ation D
l 750
astopo
Certific
Séb
N° :
34
07.01.3
fies that
ny certi
Compa
fication
5-F9
Class F
Filters
Fine Air
from
P
GROU
FARR
d at
eden
CAMFIL
NT Certi
EUROVE
igatan
Industr
en
have be
Locate
OSA Sw
933 TR
3 , 61
me
Trade na
Camfil
The list
OM
ucts is
fied prod
of certi
ht
is author
d
standar
6
-11-200
d at :
displaye
m
tion.co
certifica
ovent-
w.eur
tp://ww
use
ised to
llowing
ts of fo
iremen
the requ
cording
ed ac
assess
P
ce
GROU
cordan
L FARR
ark in ac
CAMFI
ation m anual
Certific
M
ROVENT e Operational
the EU
in th
d
06
ifie
20
spec
OM-11-
IST
s BENO
Jacque certification
r of
Directo
:
al date
Approv
:
cked on
Re-che
til :
Valid un
rules
with the
31/01/07
31/12/07
31/03/09
Comprehensive stocks
backed by integrated
inhouse logistics
CityFlo ............................................................ 62
CityCarb® .......................................................... 63
CitySorb ............................................................ 64
Camcarb Green ................................................... 65
Camcarb Mounting Frames ................................... 66
Camsure ............................................................ 67
Hi-Flo® M-Series .................................................29
Hi-Flo® P, PL-Series ...........................................30
Hi-Flo® U-Series .................................................31
Hi-Flo® A-Series .................................................32
Hi-Flo® T-Series .................................................33
S-Flo W P Series ..................................................34
S-Flo W U Series .................................................35
S-Flo W A Series ..................................................36
Opakfil Green ......................................................37
Ecopleat & Ecopleat MCTA ...................................38
Riga-Flo ............................................................39
OpakAir ............................................................40
Airopac® ............................................................41
Filter Frames and Housings
Sofilair - H10 to H14 ...........................................45
Sofilair Green ......................................................46
Close Pleat - H13 ................................................47
Opakfil G Micretain - H10 ....................................48
Megalam MD, MX, MG .........................................49
Megalam MX & MG - H14 ....................................50
Megalam MD - H10 & H14 ...................................51
Megalam MD & MG - U15 ....................................52
Megalam (Laminator) MDL & MXL - U15 & U16 .....53
Silent Hood Diffuser - H14 ...................................54
Megalam U (Gel) - H14 & U15 .............................55
Megalam T (Gel) - H14 & U15 ..............................56
Megalam MD & MX e-PTFE - U15 .........................57
Knowsley Road, Haslingden, Lancashire, BB4 4EG
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
www.camfilfarr.co.uk
1
A i r F i l t e r Te c h n o l o g y
As part of our continuous improvement, Camfil Farr reserve the right to change specifications without notice.
HEPA / ULPA Filters, Class H10 to U17
Absolute Filter Holding Frame .............................. 70
Type 8 - Filter Holding Frame ............................... 71
FCB-P
............................................................ 72
FCBS-HF ............................................................ 73
FCBS-A ............................................................ 74
FCBL-CC ............................................................ 75
FCBL-CS ............................................................ 76
FCBL-HF ............................................................ 77
Pharmaseal ......................................................... 78
Camsafe ............................................................ 79
Termikfil 2000 ................................................... 80
Absolute® 1FRK ................................................. 81
Paint Extract Filters ............................................. 82
Airopac® HT-HF ................................................. 83
Panolair SSI - Micretain H10 ............................... 84
CDM Media ........................................................ 85
Cam GT® ........................................................... 86
Campulse EF ...................................................... 87
Hi-Flo® T ........................................................... 88
Gold Series ......................................................... 89
HemiPleat Cartridges ........................................... 90
Carbon and Chemical Filters
Bag and Compact Filters, Class F5 to F9
Housings, frames & special applications
Camfil Farr Solutions
30/30
............................................................18
Aeropleat PP .......................................................19
Camglass GP .......................................................20
Pad Holding Frame ..............................................21
EcoFlo
............................................................22
Cam Glass Media .................................................23
Synthetic Media Rolls ..........................................24
Fan Coil Filter .....................................................25
Hi-Cap® 30P, 40P, 50P ......................................26
Pre-Filtration, Class G3 to F5
Bag and Compact Filters,
Class F5 to F9
H E PA / U L PA F i l t e r s , C l a s s
H10 to U17
Index - Camfil Farr
Quick Selection Guide
Air Filter Selection
Filter Grade
EN 779:2002
Primary Filters
Primary Filtration
Medium Efficiency
Primary Filters
G2
≥ 65%
G3
≥ 80%
G4
≥ 90%
EN 779:2002
Average Arrestance
EN 779:2002
Fine Filters
High Efficiency
F5
≥ 40%
F6
≥ 60%
F7
≥ 80%
F8
≥ 90%
F9
≥ 95%
MPPS (Most Penetrating Particle Size)
≥ 95%
H10
≥ 85%
≥ 99,9%
H11
≥ 95%
≥ 99,97%
H12
≥ 99,5%
H13
≥ 99,95%
H14
≥ 99,995%
U15
≥ 99,9995%
U16
≥ 99,99995%
U17
≥ 99,999995%
≥ 99,99%
ULPA
≥ 99,999%
CityFlo, CitySorb,
CityCarb, Camcarb
Filter Housings, Camseal, FC Casings,
Type 8 Frames etc.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
2
DOP 0,3 um
EN 1822
HEPA
EN 779:2002
Average Efficiency
Very High Efficiency
100 000
10 000
100 to 1000
1 to 10
Class according to Fed. Std 209 E
Filter Holding
Frames and
Casings
Molecular
Final Filters /
Clean Room Filters
Filtration for Air
Conditioning Systems.
Pre-Filtration for HEPA/
ULPA Filters
Fine Filters
Services
Filter installation upgrade service
Before
After
In addition to providing up to date air filtration solutions Camfil Farr can
provide a structured training program covering all aspects of air
filtration engineering. Adapted to suit your needs the training includes
information on how to specify and select air filters, air filter standards,
indoor air quality legislation, air filter application, and reducing energy
and environmental impact.
Become the air filtration specialist in
your company
Air filter system validation service
By fitting energy efficient filters and maintaining ventilation systems real
energy savings can be made quickly. Maintained correctly these will
translate into long lasting real reductions in cost and environmental
impact. Camfil can provide a comprehensive package of air hygiene
services that will ensure your systems are healthy, legislation compliant,
and cost effective.
Class F5 to F9
Camfil Academy:
Performance Managed Supply
Camfil complete the “cradle to grave” responsibility for all your filtration
needs by providing a unique logistics system at the centre of which is a
national transport fleet. This dedicated fleet of vehicles with trained
employees ensures that you get your goods when and where you need
them. To complete the service, we can remove and dispose of used
filters together with providing all of the required certification.
Ensuring safe and efficient running of effective air filtration systems
demands a multi-disciplined service solution. These extend beyond
comprehensive logistics to ensuring that filters are fitted correctly,
working efficiently, and optimised to reduce the overall cost of
ownership for the lifetime of the installation.
In order to comply with current legislation and reduce cost of ownership
of some installations, upgrading work is required. Camfil can provide a
joined up solution which includes selection, supply, fitting,
commissioning and validation of any new or upgraded installations.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
3
Camfil has a fresh approach to managing on-site air filtration services.
We understand that filtration is required for protecting people’s health,
ensuring legislative compliance and protecting valuable investments.
We have our own site service team that can manage all aspects of your
air filter requirements by offering a wholly inclusive service package.
Camfil Filter Management
H10 to U17
Camfil On-Site Expertise:
Caring for the Environment
“How will your filters help you to reduce
the environmental impact of your
installations?”
Camfil has been involved in air quality for over 40 years, and has to set
an example when it comes to the environment. It therefore has an
obligation to provide its customers with practical assistance on green
issues. With regard to complying with the law on waste disposal, Camfil
is with you all the way; in designing products and services, Camfil
shares your environmental concerns.
It is now widely acknowledged that air conditioning filters can be
considered ordinary industrial waste, whereas filters used in
environments containing potentially hazardous products (e.g. return air
from clean rooms, spray booths and operating theatres) should be
considered special industrial waste and must be disposed of by an
approved route using accredited systems.
Please Note - your individual circumstances depend entirely on your
processes and we recommend that you approach your usual waste
disposal provider, who will be qualified to advise you on the matter.
Follow up CFM
Conscious of the increasing importance attached by our customers to
waste management, Camfil can support you and take charge of
replacing and organising the disposal of certain used filters as part of its
CAMFIL FILTER MANAGEMENT (CFM) programme. For more information
and to find out whether this service might work for you, please contact
us.
In order to minimise waste, Camfil pay
close attention to the life cycle of the
product:
1. We make strenuous efforts to extend the lifespan of our filters and to
optimise their performance, which means that you reduce your
operating costs, the frequency with which you have to replace the filters
and the cost of their disposal.
Just look at the large filter surface used in many of our products and
remember large filter area is synonymous with long filter life.
2. We favour the use of recyclable or incinerable materials.
4. The Green CAMFIL range ensures that you can dispose of your used
filters with less hassle and at lower cost. The use of plastics or
cardboard lends itself to the incineration of used filters whilst ensuring
compliance with all provisions of environmental law.
5. We minimise the weight of materials used in the construction of our
filters which helps reduce the waste mass as far as possible when the
filter reaches the end of its life.
6. In our ISO 14001 certified factories, we are phasing out the use of
chloride solvents and hazardous products from our processes.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
4
3. We are continually researching effective materials with low pressure
loss, a parameter that has a direct influence on the energy consumed
during the lifetime of the filter.
70% of the total cost comes from energy
costs
Calculations show that energy normally accounts for 70% of the total
cost of the life cycle of an air treatment system. Energy consumption is
in direct proportion to the filter’s average pressure loss.
100
80
60
40
2
Class F5 to F9
En
y
erg
20
5
%
t
t
t
t
t
Cos r Cos g Cos r Cos l Cos
u
a
e
n
s
t
o
i
l
o
b
i
n
p
F
a
La
Dis
Cle
Choosing the right filter saves energy
H10 to U17
In order to optimise the lifespan of the filter and to reduce energy
consumption, it is important to bear in mind the extent to which their
configuration and their structure influence the average pressure loss.
Tapered pockets
Parallel pockets
Blocked surface = high energy consumption
Software aimed at helping select the
right filter = optimising energy costs
Typical pressure loss (Pa) in a ventilation system with 2 stage filtration
1Pa = 1 euro
A rule of thumb, for a typical installation running for half of the time over
one year, is that one additional Pascal in pressure drop adds 1 euro per
filter in extra energy cost.
For over 40 years, Camfil Farr has played a pioneering role in designing
filters with low average pressure loss for all efficiency levels for air
conditioning and ventilation systems. Camfil Farr was the first filter
manufacturer to develop sophisticated software that calculates the
overall cost for the complete life cycle of air filters. As part of our
continuous improvement, this software has evolved over time and it
uses real life data collected from numerous tests in real use conditions.
This enables us to calculate the pressure loss of the filter and its actual
lifespan, rather than relying on theoretical calculations.
For more information and assistance, please contact your
nearest branch of Camfil Farr.
A badly designed filter construction could add 50 Pascal compared to a
well engineered filter, even if it claims to have the same efficiency. In
other words it adds 50 euros to the annual energy bill, for every filter.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
5
The price of crude oil has more than doubled in recent years and the
cost of electricity is rising throughout the world. The World Bank’s
Energy Group has predicted that total energy consumption is set to rise
at the current rate for at least the next 50 years.
The cost of ventilation
Ventilating buildings, as we know, can be a very expensive business. The
average energy cost of filters is around 30% of the total costs of the
system. By choosing the right filter, for example the F7 for its efficiency
and its very low average pressure loss, energy savings can be made
whilst maintaining a high level of IAQ. When you consider that the air
filter is the most inexpensive and simplest component to change,
savings can be made quickly.
8
15
Economic optimisation of air filtration
70
Would you like to reduce your energy outgoings?
Energy & Air Quality Rating
The newly developed Energy & Air Quality Rating makes it easy to
reduce energy consumption and at the same time, it guarantees the air
quality. These two critical factors were taken into consideration during
the development of our new classification system. If a filter achieves a
good grade, it is because it cuts costs and makes the air clean. It’s as
simple as that.
Honestly, how did you choose filters
before?
Selecting the correct air filter has never been easy but
the Energy & Air Quality Rating changes that. Using the
rating system, it’s easy to choose the right air filter for
your needs. It’s important however, to be aware that an
A-filter is not always the right choice for you. The top
rating may be appropriate for a medical or food
application where the demand for air quality is critical.
Conversely, a G-filter may be the best choice for a lowgrade storeroom. Whatever your budget and your
requirement for air quality, there will be a rating letter to
meet your needs. The selection process will be both
easy and precise.
It’s not just about new EU energy
concepts, it’s about your grandchildren.
The new and more stringent requirements aim to make your company
more energy efficient but the most important aspect is much closer to
home. At Camfil Farr, we are constantly striving to develop new
technologies and methods that make us even more environmentally
friendly. We want to give our children and our grandchildren the
opportunity to grow up in a clean environment. At the end of the day,
that’s what matters most.
This symbol will speak volumes in your
annual report.
cases we have seen that air filters may be responsible for as much as
30 percent of the total energy consumption in an air-handling unit.
Consequently, there is substantial profit to be made by choosing wisely.
The Energy & Air Quality Rating helps you control your energy
consumption. That will save you money. Actually, a lot of money.
Why one of the leading filter companies
cares.
We believe in transparency and honesty. The filter industry is clouded by
numbers and figures, making it virtually impossible to compare different
filters. We want to clean up the mess. Surely, the customer will profit
from having all the facts when deciding which filter to
choose. We believe that the industry itself will benefit from a common
standard, since it puts pressure on developers to make energy efficient
filters. When a company develops an excellent filter, we think it should
be rewarded with an “A”.
Objectively tested.
Filter efficiency in actual use was an essential parameter when
developing the Energy & Air Quality Rating. To guarantee independent
verification of the discharged efficiency value, we collaborated with the
Technical Research Institute of Sweden (SP) - a leading organisation in
the development of sustainable energy and environmental technology in
Europe. The data was obtained through long-term measurements,
performed under realistic conditions.
As you can see, the advantages are
obvious.
Well, maybe not crystal clear. Differentiating air filters is a complex
matter. Many variables impact a comparison study, and not all are selfevident. Laboratory tests are made under controlled conditions and test
protocols are an imperfect compromise of actual conditions. In actual
use, most air filters will remain in a system for months or even years.
During that time, an air filter will see hundreds of environmental changes
such as temperature, humidity, airflow velocity and particle load. Add to
this the fact that it is not impossible for suppliers to manipulate
observations or data to best suit their needs. With the Energy & Air
Quality Rating all you really need to look at is a single letter. All in all, we
like to think the advantages are quite obvious.
The cost of energy is at an all-time high and will continue to increase. It
has never been more important to strive for energy efficiency. In some
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
6
We have made choosing filters as easy as
ABC.
Indoor Air Quality (IAQ)
Atmospheric pollution can be categorised in two different ways. The
simplest is measurement (a physical categorisation) to distinguish
gaseous pollutants from solid, dust and particulate pollutants. The
second is based on the origin of pollutants and is divided into primary
and secondary pollutants.
Solid pollutants usually in the form of small (fine) particles are very
important and from a cleanliness point of view, these particles deserve
particular attention. These are capable of acting as vectors to other
substances, such as carcinogenic polycyclic aromatic hydrocarbons,
which is particularly worrying given the capacity of the finest particles (<
1μm) to find their way into the lungs and even to penetrate into the
bloodstream. Effective solutions aimed at combating such particle
pollution are now widely known. The development of the main standards
and recommendations governing the manufacture and use of modern air
filters is clearly geared towards much higher filtration levels than have
been permitted in the past
Primary pollutants
City
Primary pollutants are substances present in the atmosphere, in the
form in which they are emitted. Of these pollutants, some are especially
prominent:
Sulphur dioxide (SO2) emitted by certain industrial processes, such as
paper-making and refining, and in particular by the use of sulphurous
fossil fuels. SO2 is one of the main causes of acid rain on account of its
transformation in the atmosphere into sulphuric acid (H2 SO4). Nitric
oxides (NOX), and in particular nitrogen dioxide (NO2), which is usually
emitted from the burning of fossil fuels (particularly vehicles), contribute
towards the formation of ozone in the atmosphere. Polycyclic aromatic
Our range of ‘CITY’ filters has been developed with the sole purpose of
combating atmospheric pollution and its major components.
Atmospheric pollution
CITYCARB and CITYFLO combine particulate filtration with pollution
and odour filtration. They are suitable for any new installation and can be
readily installed to upgrade and improve systems currently equipped
with standard filters.
With its higher molecular adsorption, CITYSORB is ideal for highly
polluted urban environments. CITYSORB must be fitted in conjunction
with a particulate filter above F7 efficiency, HIFLO or OPAKFIL type.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
7
Class F5 to F9
Solid pollutants
H10 to U17
Secondary pollutants are substances whose presence in the
atmosphere is the result of chemical transformations related to the
interaction of compounds known as precursors. Ozone is the main
secondary pollutant, it is formed as a result of a photochemical process
in the presence of certain primary pollutants (carbon monoxide, nitric
oxide and volatile organic compounds). This is a gas that is naturally
present in the atmosphere in low concentrations at high altitude. At low
altitude, on the other hand, the development of the concentration is
primarily the result of human activity. Sulphuric acid and nitric acid form
in the atmosphere as a result of humidity from sulphur dioxide and nitric
oxide respectively.
.
Secondary pollutants
Environmental health is becoming a central concern at national and
international levels. Indoor Air Quality (IAQ) is an area that focuses on
providing a comfortable and healthy indoor environment which is
important to the well being of people. We spend 80% of our time in
indoor spaces and, as such, the issue of IAQ is a key aspect of public
health, especially since this affects the entire population, particularly the
most sensitive and vulnerable.
The industrialised world is a very different place compared to 50 years
ago and one major difference is that the air we breathe is now more
heavily and more diversely polluted than at any time in the past.
Although natural sources of pollution exist, the greater concerns arise
as a result of mans own activities which have increased both the amount
and the complexity of pollutants found in the atmosphere. There are tens
of thousands of synthetic chemicals (not found in nature) made today
with an estimated annual production rate in excess of a billion tonnes.
These chemicals are released to the atmosphere during
manufacture use and can subsequently travel vast distances. They are
an inevitable part of our lives
hydrocarbons are emitted by the incomplete burning of fuels or carbon,
which can usually be found in the air, linked to particles. Some of them
are known to be highly carcinogenic.
Environmental Health
AT E X
ATEX Directive: Explosive atmospheres
Two important new safety directives have entered into force in Europe.
These new regulations come under the title of ATEX Directives and apply
to manufacturers, suppliers and users of equipment intended for use in
potentially explosive atmospheres (dangerous areas). An explosive
atmosphere is defined as a mixture with air, under atmospheric
conditions, of hazardous substances in the form of gases, vapours,
mists or dusts in which, after ignition has occurred, combustion spreads
to the entire unburned mixture. The 99/92/EC (ATEX 137) Directive,
known as the ‘User Directive’ requires employers to protect their
employees from the risks posed by explosive atmospheres. The 94/9/
EC (ATEX 95 or ATEX 100A) Directive on ‘Equipment and protective
systems intended for use in potentially explosive atmospheres’ covers
electrical and non-electrical products intended for use in hazardous
places (gases, vapours, mists). Conformity with the ATEX Directives has
been a legal requirement in all EU Member States since 1 July 2003. In
Gas
Dust
Areas
0
20
1
2
21
22
biopharmaceutical applications, some procedures must use ATEXclassified filters in certain places (please see table). Camfil Farr in
Europe has developed HEPA filters and ATEX accredited housings for
use in biopharmaceutical installations in order to prevent electrostatic
dangers caused by gas or dust in an ATEX area. Camfil Farr has
developed specific versions of ATEX for most filters and housings used
in biopharmaceutical installations in order to prevent electrostatic
dangers caused by gas or dust in an ATEX area. Camfil Farr’s ATEX
solutions are entirely certified in accordance with the requirements of
the ATEX Directives with the appropriate EX marking, the ATEX
conformity statement and the instructions for use.
Key to the table:
Definition of ATEX areas and corresponding product categories.
Definitions of areas
Definitions
Place where an explosive atmosphere is permanently present
Category
ATEX
Typical suitability of place
1G
Equipment adapted to 0 areas
1D
Place where an explosive atmosphere is probable occasionally under normal
operating conditions
2G
2D
Place where an explosive atmosphere is improbable under normal operating
conditions, but, where applicable, only lasts a short time.
3G
3D
All Camfil Farr ATEX air filtering solutions
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
8
All Camfil Farr ATEX air filtering solutions are certified for use in explosive gas atmospheres (Classes 1 and 2) and explosive dust atmospheres (Classes
21 and 22). They comply with European Standard EN 13463-2001 Annex C Non-electrical equipment for potentially explosive atmospheres, as attested
by the conformity statement attached to these products.
Concerns over public health have resulted in increased awareness about indoor air quality (IAQ). We now spend approximately 80% of our time in indoor
spaces and legislation now requires that these spaces are comfortable, safe and without risk to health. Camfil Farr filters for air conditioning systems
help to safeguard human health by preventing airborne contamination from entering these environments. In addition correctly selected and maintained air
filters keep air conditioning systems clean ensuring that they perform in accordance with design parameters. Camfil Farr’s extensive range of comfort air
filters, are typically used in offices, schools and shopping centres etc.
1, 2, 6, 7 or 8
5 or 9
1, 2, 3, 4, 5 or 6
5
5
5 or 9
Class F5 to F9
1, 2, 6, 7 or 8
3 or 4
5
3, 10
H10 to U17
5
3. Citycarb
6. S-Flo
7. Hi-Cap
8. 30/30
4. City-Flo
9. Fan Coil Filter
5. Ecopleat
2. Opakfil Green
10. Eco-Flo
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
9
1. Hi-Flo
IAQ recommendations
Public Buildings
Hospitals and Healthcare
Nowhere is air filtration more important than in health care facilities. Air filters offer excellent protection from airborne diseases in health care facilities,
provided that they form part of an overall air quality control programme. Camfil Farr provides a comprehensive solution that ensures the provision of this
quality. Our extensive scope of supply ranges from providing air filters to satisfy the most demanding standards, air filter housings, system validation and
monitoring, filter management, and specialist consultancy services. Our products provide safe and comfortable environments for patients, visitors and
healthcare professionals.
1
2
3, 4
5, 6
5, 6
6, 8
7, 9
7, 9
1. Hi-Flo F7
2. Opakfil Green F8
3. Sofilair H13
6. Megalam MDA
7. Ecopleat
8. CamHOSP2
details on request
4. FC-Filter Casing
9. Sofdistri Exhaust
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
10
5. Sofdistri
Hospital and Healthcare recommendations
Pharmaceutical Industry
4, 5
8, 11
Class F5 to F9
7, 8, 9, 10
3, 11, 15
H10 to U17
3, 12, 13
3, 14
1. Hi-Flo F7
2. Opakfil Green F7
3. Sofilair H13
6. Pharmaseal
7. Softdistri
8. Megalam MD
12. Camsafe
13. Airopac/Opakair
4. CamGrid
9. Softdistri Polyester
14. FC - Filter Casing
Pharmaceutical Industry recommendations
5. Megalam T "U"
10. Megalam Green
15. Ecopleat F6
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
11
6, 8
2
1
For more than forty years Camfil Farr has been a leading supplier of air filter products and services to the Bio-Pharma Industry. Many of our clients have
multiple facilities located around the world. Camfil Farr is viewed by many of the largest pharmaceutical manufacturers as a partner and well positioned
to support their air filtration demands on a local and global basis.
Food Industry
Protecting human health is a major concern for governments throughout the world. In many countries agencies associated with food safety have the
authority to take direct action against manufacturers who fail to ensure the safety of foodstuffs that they produce. To prevent the air conditioning system
from becoming contaminated, temperature, humidity and cleanliness must be closely controlled. Talk with the experts in clean air solutions - Camfil Farr.
1, 2
3
3
4, 5
6, 7
8, 9, 10
1. Hi Flo F7
2. S-Flo F7
3. Opakfil F8
4. Sofilair H13
5. FC - Filter Casing
6. Sofdistri
7. Megalam
9. 30/30
10. Ecopleat
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
12
Food Industry recommendations
Automotive Industry
8, 9, 1, 2, 3
8, 9, 1, 2, 3
4
H10 to U17
5, 6 or 7
8, 9, 1, 2, 3
Class F5 to F9
8, 9, 1, 2, 3
Few industrial applications demand such a clean working environment as painting facilities. Paint spraying facilities require a constant supply of fresh air
for hygiene and safety reasons. We currently provide clean air and services to many major automotive plants throughout the world. We provide the best
possible cost effective clean air solutions, customised and performance-optimised to meet your demands. Supplied and delivered exactly according to
your needs – by Camfil Farr.
3. Opakfil
6. Panolair
7. Camgrid SM 20
8. 30/30
4. Airopac HT/Panolair HT
5. CDM-600
2. S-Flo
9. Hi-Cap
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
13
1. Hi-Flo
Automotive Industry recommendations
Microelectronic Industry
Advanced production methods often require very clean air, and as technology advances these requirements look likely to increase. Camfil Farr is
recognised as the leading supplier of high efficiency filtration products for the microelectronics industry. HEPA/ULPA filters are produced within controlled
environments in our ISO 9000-certified plants and are individually tested and certifed to ensure compliance. Our large production capacity ensures the
availability of our products at all times throughout the world.
1, 2
2, 3, 4
4, 5
7
1, 2
6
1, 2 or 3
8
6
2, 3, 4
4, 5
4, 5
1. Hi-Flo F7/F8
2. Opakfil Green F8/H10
3. Camcarb
6. Silent Hood
7. Megalam MX MG
8. Megalam U
4. Sofilair H13/H14
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
14
5. Gigapleat
Microelectronic Industry recommendations
Gas Turbines, Air Filters and Systems
1, 2, 3, 4, 5, 8
Camfil Farr provides systems solutions for the turbo machinery and power systems industry. Our solutions include filters, ducting, fans, silencers, and deicing. With more than 40 years of experience, Camfil Farr delivers value to customers worldwide whilst providing everyone with something essential clean air.
H10 to U17
Class F5 to F9
6, 7
3. Hi-Cap
6. CamPulse EF
7. HemiPleat
details on request
8. Camclose
details on request
4. Ecopleat
2. Hi-Flo
5. Cam GT
1. 30/30
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
15
Gas Turbine, Air Filters and System recommendations
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
16
Notes
Page 18
Page 19
Page 20
Page 21
Metal Panels
EcoFlo
Media Rolls
Cam Glass Media
Media Rolls
Synthetic Media Rolls
Fan Coil Filters
Fan Coil Filter
Page 22
Page 23
Page 24
Page 25
Pad Filters
Pad Holding Frame
Class F5 to F9
Panel Filters
Camglass GP
H10 to U17
Pleated Filters
Aeropleat PP
Pleated Filters
30/30
Primary Bag Filters
Hi-Cap® 30P, 40P, 50P
Page 26
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
17
Summary Pre-Filtration, Class G3 to F5
Pleated Filters
30/30
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
• High mechanical strength
• Large media surface
• Fully supported media bonded
• Unique radial pleat design
onto a wire support grid
• Rigid, water resistant cardboard
frame
• Bonded into case to eliminate
air bypass
Application: Primary filter for air conditioning systems.
Type: High performance disposable pleated panel filter.
Case: Rigid water resistant cardboard.
Media: Mixture of cotton and synthetic fibre.
EN 779:2002 efficiency: G4.
Gravimetric efficiency: 92%.
Eurovent 4/5 efficiency: EU4.
Recommended final pressure drop: 250 Pa.
Temperature: 70°C maximum in continuous service.
Holding frames: Front and side access housings and frames are available, Type 8, Type L, and
FC Housings.
Reference
Type
Model
Dimensions
(WxHxD) mm
Filter
classification
EN 779:2002
Air flow/
pressure drop
m³/hr/Pa
Media
area
m2
049880-927
30/30 Panel
30/30-12122NOM
305x305x50
G4
864/70
0,39
0,24
0,01
F
049880-006
30/30 Panel
30/30-12242NOM
305x610x50
G4
1710/70
0,79
0,40
0,01
F
049880-001
30/30 Panel
30/30-16202NOM
406x508x50
G4
1890/70
0,94
0,44
0,01
F
049880-004
30/30 Panel
30/30-16252NOM
406x635x50
G4
2340/70
1,18
0,55
0,02
F
049880-002
30/30 Panel
30/30-20202NOM
508x508x50
G4
2340/70
1,12
0,55
0,02
F
049880-012
30/30 Panel
30/30-20242NOM
508x610x50
G4
2880/70
1,36
0,66
0,02
F
049880-003
30/30 Panel
30/30-20252NOM
508x635x50
G4
2970/70
1,42
0,70
0,02
F
049880-005
30/30 Panel
30/30-24242NOM
610x610x50
G4
3420/70
1,64
0,78
0,02
F
059413-002
30/30 Panel
30/30-12244NOM
305x610x100
G4
2070/90
1,28
0,75
0,02
E
059413-004
30/30 Panel
30/30-16204NOM
406x508x100
G4
2250/90
1,45
0,85
0,02
E
059413-005
30/30 Panel
30/30-16254NOM
406x635x100
G4
2880/90
1,82
1,05
0,04
E
059413-003
30/30 Panel
30/30-20204NOM
508x508x100
G4
2880/90
1,73
1,05
0,04
E
059413-008
30/30 Panel
30/30-20244NOM
508x610x100
G4
3420/90
2,09
1,25
0,04
E
059413-006
30/30 Panel
30/30-20254NOM
508x635x100
G4
3600/90
2,18
1,30
0,04
E
059413-001
30/30 Panel
30/30-24244NOM
610x610x100
G4
4140/90
2,56
1,45
0,04
E
054862-010
30/30 Panel
30/30-12241NOM
305x610x25
G4
1310/65
0,42
0,25
0,01
G
054862-001
30/30 Panel
30/30-16201NOM
406x508x25
G4
1460/65
0,45
0,30
0,01
G
054862-004
30/30 Panel
30/30-16251NOM
406x635x25
G4
1840/65
0,57
0,35
0,01
G
054862-002
30/30 Panel
30/30-20201NOM
508x508x25
G4
1800/65
0,56
0,35
0,01
G
054862-933
30/30 Panel
30/30-20241NOM
508x610x25
G4
2200/65
0,68
0,40
0,01
G
054862-003
30/30 Panel
30/30-20251NOM
508x635x25
G4
2300/65
0,71
0,45
0,01
G
054862-005
30/30 Panel
30/30-24241NOM
610x610x25
G4
2600/65
0,83
0,50
0,01
G
Other dimensions are available on request - All dimensions are nominal.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
18
Unit
Unit
weight volume Energy
Rating
kg
m3
TIFICAT
ER
E
C
Advantages
Type
DU
ALLY CER
TI
F
W
D
Model
• Bonded into case to eliminate
onto a wire support grid
air by-pass
• Robust construction
Application: Pre filter for comfort air conditioning applications.
Type: Disposable pleated panel filter.
Case: Moisture resistant cardboard.
Media: Mixture of cotton and synthetic fibre.
Gravimetric efficiency: 92%.
FC Housings.
Dimensions
(WxHxD) mm
Filter
flow/pressure Media
classification EN Airdrop
m³/hr/Pa
area m 2
779:2002
Unit
weight
kg
Unit
volume
m3
Energy
Rating
PP12122NOM Aeropleat PP PP12122NOM
305x305x50
G4
820/70
0,26
0,20
0,01
G
305x610x50
G4
1620/70
0,53
0,35
0,01
G
406x508x50
G4
1830/70
0,63
0,40
0,01
G
406x635x50
G4
2300/70
0,79
0,50
0,02
G
508x508x50
G4
2290/70
0,75
0,50
0,02
G
508x610x50
G4
2750/70
0,91
0,55
0,02
G
508x635x50
G4
2880/70
0,95
0,60
0,02
G
610x610x50
G4
3240/70
1,10
0,65
0,02
G
305x610x100
G4
1640/55
0,85
0,65
0,02
G
406x508x100
G4
1830/55
0,96
0,75
0,02
G
406x635x100
G4
2300/55
1,20
0,90
0,04
G
508x508x100
G4
2290/55
1,15
0,90
0,04
G
508x610x100
G4
2750/55
1,38
1,05
0,04
G
508x635x100
G4
2880/55
1,44
1,10
0,04
G
610x610x100
G4
3240/55
1,70
1,20
0,04
G
305x610x25
G4
1310/75
0,28
0,25
0,01
G
406x508x25
G4
1460/75
0,31
0,25
0,01
G
406x635x25
G4
1840/75
0,39
0,30
0,01
G
508x508x25
G4
1800/75
0,38
0,30
0,01
G
508x610x25
G4
2200/75
0,46
0,35
0,01
G
508x635x25
G4
2300/75
0,48
0,40
0,01
G
610x610x25
G4
2600/75
0,55
0,45
0,01
G
DI
Reference
IE
D
IN
VI
• Fully supported media bonded
frame
• Comprehensive range of
standard and non standard
sizes
EN 779:2002
• Moisture resistant cardboard
Other sizes are available on request - All dimensions are nominal.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
19
TIFICAT
ER
E
C
Advantages
Class F5 to F9
Aeropleat PP
H10 to U17
Pleated Filters
Panel Filters
Camglass GP
Advantages
• Moisture resistant cardboard
frame
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
• Gradual density media to
improve dust holding capacity
Application: Pre filter for comfort air conditioning applications.
Type: Disposable panel filter.
Case: Moisture resistant cardboard.
Media: Glass fibre.
EN 779:2002 efficiency: G2, G3.
Gravimetric efficiency: 75% - 85%.
Eurovent 4/5 efficiency: EU2, EU3.
FC Housings.
Air flow /
Unit
Media pressure
drop volume
2
area m
m 3 /hr/Pa
m3
Reference
Type
Model
Dimensions
(WxHxD) mm
Filter
classification
EN779:2002
GP12242NOM
Camglass GP
GP12242NOM
305x610x50
G3
0.19
1200/50
0.01
0.20
GP15152NOM
Camglass GP
GP15152NOM
381x381x50
G3
0.15
990/50
0.01
0.15
GP15202NOM
Camglass GP
GP15202NOM
381x508x50
G3
0.19
1315/50
0.01
0.20
GP16202NOM
Camglass GP
GP16202NOM
406x508x50
G3
0.21
1400/50
0.01
0.20
GP16252NOM
Camglass GP
GP16252NOM
406x635x50
G3
0.26
1750/50
0.02
0.25
GP18182NOM
Camglass GP
GP18182NOM
457x457x50
G3
0.21
1400/50
0.02
0.20
GP20202NOM
Camglass GP
GP20202NOM
508x508x50
G3
0.26
1750/50
0.02
0.25
GP20242NOM
Camglass GP
GP20242NOM
508x610x50
G3
0.31
1460/50
0.02
0.30
GP20252NOM
Camglass GP
GP20252NOM
508x635x50
G3
0.32
2100/50
0.02
0.35
GP24242NOM
Camglass GP
GP24242NOM
610x610x50
G3
0.37
2400/50
0.02
0.40
GP12241NOM
Camglass GP
GP12241NOM
305x610x25
G2
0.19
1200/45
0.01
0.20
GP15151NOM
Camglass GP
GP15151NOM
381x381x25
G2
0.15
990/45
0.01
0.15
GP15201NOM
Camglass GP
GP15201NOM
381x508x25
G2
0.19
1315/45
0.01
0.20
GP16201NOM
Camglass GP
GP16201NOM
406x508x25
G2
0.21
1400/45
0.01
0.20
GP16251NOM
Camglass GP
GP16251NOM
406x635x25
G2
0.26
1750/45
0.01
0.25
GP18181NOM
Camglass GP
GP18181NOM
457x457x25
G2
0.21
1400/45
0.01
0.20
GP20201NOM
Camglass GP
GP20201NOM
508x508x25
G2
0.26
1750/45
0.01
0.25
GP20241NOM
Camglass GP
GP20241NOM
508x610x25
G2
0.31
1460/45
0.01
0.30
GP20251NOM
Camglass GP
GP20251NOM
508x635x25
G2
0.32
2100/45
0.01
0.35
GP24241NOM
Camglass GP
GP24241NOM
610x610x25
G2
0.37
2400/45
0.01
0.40
Other sizes are available on request. All dimensions are nominal.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
20
Unit
weight
kg
TIFICAT
ER
E
C
standard and non standard
sizes
Pad Filters
Pad Holding Frame
industrial applications
DI
DU
ALLY CER
TI
F
W
D
Reference
Type
Model
Dimensions
(WxHxD) mm
Filter
classification EN
779:2002
Air flow/pressure
drop m³/hr/Pa
Media
area m 2
Unit
weight
kg
Unit
volume
m3
AMZ24242 NOM
PHF-2S
2" POLY
597x597x45
G3 / G4
3240/109
0,36
1,2
0,016
AMZ20242 NOM
PHF-2S
2" POLY
495x597x45
G3 / G4
2700/109
0,30
1,0
0,013
AMZ12242 NOM
PHF-2S
2" POLY
292x597x45
G3 / G4
1620/109
0,18
0,6
0,007
AMZ24241 NOM
PHF-1S
T15-350
597x597x25
G3 / G4
1924/25
0,36
1,0
0,007
AMZ20241 NOM
PHF-1S
T15-350
495x597x25
G3 / G4
1595/25
0,30
0,9
0,005
AMZ12241 NOM
PHF-1S
T15-350
292x597x25
G3 / G4
941/25
0,18
0,6
0,003
AMZ24242 NOM
PHF-2G
2" GLASS
597x597x45
G3
3240/60
0,36
1,2
0,016
AMZ20242 NOM
PHF-2G
2" GLASS
495x597x45
G3
2700/60
0,30
1,0
0,013
AMZ12242 NOM
PHF-2G
2" GLASS
292x597x45
G3
1620/60
0,18
0,6
0,007
AMZ24241 NOM
PHF-1G
1" GLASS
597x597x25
G2
3240/50
0,36
1,0
0,007
AMZ20241 NOM
PHF-1G
1" GLASS
495x597x25
G2
2700/50
0,30
0,9
0,005
AMZ12241 NOM
PHF-1G
1" GLASS
292x597x25
G2
1620/50
0,18
0,6
0,003
Other sizes available on request - Alternative constructions also available.
IE
D
IN
VI
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
21
C
E
TIFICAT
ER
EN 779:2002
Application: Pre filtration in air conditioning or industrial processing systems.
Type: Coarse grade filter.
Frame: Standard galvanised mild steel.
Media: Synthetic / glass fibre.
EN 779:2002 efficiency: G2, G3, G4.
Arrestance efficiency: 65% - 90%.
Eurovent 4/5 efficiency: EU2, EU3, EU4.
Humidity: 100% RH.
Optional: Alternative frame materials available on request.
Class F5 to F9
• Suitable for commercial and
• Support mesh downstream
H10 to U17
• Retaining wire for media pad
• Replaceable filter media
Advantages
Metal Panels
EcoFlo
Advantages
• Totally washable
• Low pressure drop
• Suitable for high air flow
conditions
EN 779:2002
DI
Reference
Type
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
Application: Kitchen extract systems, Pre filtration within air conditioning systems.
Type: Grease elimination or coarse dust removal.
Frame: Galvanised Mild Steel.
Media: Knitted or multilayer pad.
EN 779:2002 efficiency: G2, G3.
Humidity: 100% RH.
Accessories: Handles and drain holes.
Optional: Alternate materials available on request e.g. Stainless Steel.
FC Housings.
Dimensions
WxHxD (mm)
Model
Filter classification Air flow/pressure drop Media
EN 779:2002
(m³/hr/Pa)
area (m 2 )
Unit
weight
(kg)
Unit
volume
(m 3 )
GFP12122NOM EcoFlo GFP12122NOM
292x292x45
G2
810/30
0,09
1,2
0,004
292x596x45
G2
1620/30
0,18
2,3
0,005
495x495x45
G2
2250/30
0,25
3,4
0,011
495x596x45
G2
2700/30
0,30
4,0
0,013
596x596x45
G2
3240/30
0,36
4,5
0,016
MMP12122NOM EcoFlo MMP12122NOM
292x292x45
G3
810/40
0,09
1,2
0,004
292x596x45
G3
1620/40
0,18
2,3
0,005
495x495x45
G3
2250/40
0,25
3,4
0,011
495x596x45
G3
2700/40
0,30
4,0
0,013
596x596x45
G3
3240/40
0,36
4,5
0,016
Other dimensions available on request - Alternative constructions also available.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
22
TIFICAT
ER
E
C
• Support mesh on both sides
Media Rolls
Cam Glass Media
F
TI
Dust
Media Velocity/pressure drop m/
Unit
holding
g/
2
s/Pa
area m
volume
m3
m²
Reference
Type
Model
Dimensions
(meters)
Filter classification EN
779:2002
PR5071020
50 mm
PR 50
0.710 x 20
G2
14.20
1.8 / 30
600
0.71
PR5071040
50 mm
PR 50
0.710 x 40
G2
28.40
1.8 / 30
600
1.42
PR50120
50 mm
PR 50
1.0 x 20
G2
20.00
1.8 / 30
600
1.00
PR50140
50 mm
PR 50
1.0 x 40
G2
40.00
1.8 / 30
600
2.00
PR50150020
50 mm
PR 50
1.5 x 20
G2
30.00
1.8 / 30
600
1.5
PR50150040
50 mm
PR 50
1.5 x 40
G2
60.00
1.8 / 30
600
3.00
PR50182920
50 mm
PR 50
1.829 x 20
G2
36.58
1.8 / 30
600
1.829
PR50220
50 mm
PR 50
2.0 x 20
G2
40.00
1.8 / 30
600
2.00
PR50230
50 mm
PR 50
2.0 x 30
G2
60.00
1.8 / 30
600
3.00
PR7571040
75 mm
PR 75
0.710 x 40
G2
28.40
1.8 / 35
750
2.13
PR10076220
100 mm
PR 100
0.762 x 20
G2
15.24
1.8 / 40
900
1.524
PR100120
100 mm
PR 100
1.0 x 20
G2
20.00
1.8 / 40
900
2.00
PR100140
100 mm
PR 100
1.0 x 40
G2
40.00
1.8 / 40
900
4.00
PR100152420
100 mm
PR 100
1.524 x 20
G2
30.48
1.8 / 40
900
3.048
PR100152440
100 mm
PR 100
1.524 x 40
G2
60.96
1.8 / 40
900
6.096
PR100182920
100 mm
PR 100
1.829 x 20
G2
36.58
1.8 / 40
900
3.658
GR5061040
50 mm
GR50
0.610x40
G3
24.4
1.8 / 35
700
1.25
Class F5 to F9
ALLY CER
Application: For use as a pre filter in air conditioning, and spraybooth extract systems.
Media: Glass Fibre.
EN 779:2002 efficiency: G2 / G3.
Eurovent 4/5 efficiency: EU2 / EU3.
Humidity: 100% RH.
Other sizes and cut pads available on request.
DU
• Economical
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
23
DI
IE
D
IN
VI
• Full depth particle collection
resin bonded
• Smooth airflow through booths
H10 to U17
EN 779:2002
• Continous filament glass fibres,
TIFICAT
ER
E
C
Advantages
Media Rolls
Synthetic Media Rolls
Advantages
• Smooth airflow through booths
• Progressively built up thermal
bonded polyester fibre
Application: For use as a pre filter in air conditioning, and spraybooth ventilation.
Flammability: (DIN 53438) self extinguishing.
Media: Synthetic.
EN 779:2002 efficiency: G2, G3, G4.
Temperature: 80°C - 100°C maximum in continuous service.
Humidity: 100% RH.
TIFICAT
ER
E
C
• Non toxic
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
Velocity /
Media area m 2 pressure drop
m/s/Pa
Unit
volume
m3
Reference
Type
Model
Dimensions
(metres)
Filter
classification
EN779:2002
Dust
holding g/ Pack
qty
m²
T15150SI220
Roll
T15-150
2.05 x 20
G2
41
1.5 / 15
0.53
410
1
T15150SI120
Roll
T15-150
1.0 x 20
G2
20
1.5 / 15
0.26
410
1
PST290SI220
Roll
PST 290
2.05 x 20
G4
41
1.10 / 41
0.82
350
1
PST290SI120
Roll
PST 290
1.0 x 20
G4
20
1.10 / 41
0.40
350
1
PST290SI76020 Roll
PST 290
0.76 x 20
G4
15
1.10 / 41
0.30
350
1
T15-350
2.05 x 20
G4
41
1.5 / 25
0.62
678
1
T15350SI220
Roll
T15500SI220
Roll
T15-500
2.05 x 20
G4
41
1.5 / 35
0.08
540
1
POLY220
Roll
POLY 50
2.05 x 20
G3
41
1.5 / 45
2.05
550
1
POLYS210
Roll
POLY SOFT 50
2.0 x 10
G3
20
1.5 / 52
1.00
673
1
POLYS220
Roll
POLY SOFT 50
2.0 x 20
G3
40
1.5 / 52
2.00
673
1
HC80150
Roll
HC - 80
1.0 x 50
G2
50
1.5 / 12
0.50
360
1
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
24
Fan Coil Filters
Fan Coil Filter
sizes
• Economical
• Light and robust
TIFICAT
ER
E
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
Type
Model
Dimensions (WxHxD) mm
779:2002
CircaSyn (size mm)
T15-150 pad
CircaSyn
as required
G2
CircaFoam (size mm)
20PPI foam
CircaFoam
as required
G2
H10 to U17
Reference
Alternative filter materials also available - Other dimensions available on request - Alternative constructions also available.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
25
C
Application: Prevention of dust and dirt build up on heating/cooling coils within ventilation
systems.
Type: Coarse dust removal.
Frame: Metal with downstream support.
Media: Synthetic.
Arrestance efficiency: 65%.
Humidity: 100% RH.
Class F5 to F9
• Available in a wide variety of
Advantages
Primary Bag Filters
Hi-Cap ® 30P, 40P, 50P
• Rigid self supporting pockets
• Welded pocket construction
• Robust metal header frame
Application: Comfort air conditioning applications, pre filter applications.
Type: Multi pocket bag filter.
Case: Galvanised steel.
Media: Synthetic fibres.
EN 779:2002 efficiency: G3, G4, F5.
Eurovent 4/5 efficiency: EU3, EU4, EU5
FC Housings.
TIFICAT
ER
E
C
Advantages
EN 779:2002
DU
ALLY CER
TI
F
W
D
flow /
Filter
Number Media Air
pressure
classification
of
area
m3/hr/
EN 779:2002 pockets m2 drop Pa
Unit
volume
m3
Unit
weight
kg
Energy
Rating
3400/35
0.05
2.2
F
2800/35
0.05
2.0
F
1.4
1700/35
0.03
1.4
F
3.6
3400/30
0.05
2.7
F
5
3.0
2800/30
0.05
2.5
F
3
1.8
1700/30
0.03
1.6
F
G4
6
2.7
3400/40
0.05
2.2
F
G4
5
2.3
2800/40
0.05
2.0
F
287x592x380
G4
3
1.4
1700/40
0.03
1.4
F
592x592x500
G4
6
3.6
3400/35
0.05
2.7
F
20/20/5/40P/25*
490x592x500
G4
5
3.0
2800/35
0.05
2.5
F
12/20/3/40P/25*
287x592x500
G4
3
1.8
1700/35
0.03
1.6
F
Hi-Cap 50P
24/15/6/50P/25*
592x592x380
F5
6
2.7
3400/80
0.05
2.4
F
Hi-Cap 50P
20/15/5/50P/25*
490x592x380
F5
5
2.3
2800/80
0.05
2.2
F
1215350P25*
Hi-Cap 50P
12/15/3/50P/25*
287x592x380
F5
3
1.4
1700/80
0.03
1.6
F
2420650P25*
Hi-Cap 50P
24/20/6/50P/25*
592x592x500
F5
6
3.6
3400/75
0.05
3.0
F
2020550P25*
Hi-Cap 50P
20/20/5/50P/25*
490x592x500
F5
5
3.0
2800/75
0.05
2.8
F
1220350P25*
Hi-Cap 50P
12/20/3/50P/25*
287x592x500
F5
3
1.8
1700/75
0.03
1.8
F
Reference
Type
Model
Dimensions
(WxHxD) mm
2415630P25*
Hi-Cap 30P
24/15/6/30P/25*
592x592x380
G3
6
2.7
2015530P25*
Hi-Cap 30P
20/15/5/30P/25*
490x592x380
G3
5
2.3
1215330P25*
Hi-Cap 30P
12/15/3/30P/25*
287x592x380
G3
3
2420630P25*
Hi-Cap 30P
24/20/6/30P/25*
592x592x500
G3
6
2020530P25*
Hi-Cap 30P
20/20/5/30P/25*
490x592x500
G3
1220330P25*
Hi-Cap 30P
12/20/3/30P/25*
287x592x500
G3
2415640P25*
Hi-Cap 40P
24/15/6/40P/25*
592x592x380
2015540P25*
Hi-Cap 40P
20/15/5/40P/25*
490x592x380
1215340P25*
Hi-Cap 40P
12/15/3/40P/25*
2420640P25*
Hi-Cap 40P
24/20/6/40P/25*
2020540P25*
Hi-Cap 40P
1220340P25*
Hi-Cap 40P
2415650P25*
2015550P25*
Other sizes are available on request - 25* denotes a 25 mm header frame, if a 20 mm header frame is required please specify 20*.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
26
DI
IE
D
IN
VI
Summary Bag and Compact Filters, Class F5 to F9
Hi-Flo® A-Series
Page 29
Page 30
Page 31
Page 32
Bag Filters Glass Fibre
Page 33
Bag Filters Synthetic
Media
S-Flo W P Series
Media
S-Flo W U Series
Media
S-Flo W A Series
Page 34
Page 35
Page 36
Compact Filter
Opakfil Green
High Efficiency Panel
Ecopleat & Ecopleat MCTA
Pleated Compact Filter
Riga-Flo
OpakAir
Page 37
Page 38
Page 39
Page 40
H10 to U17
Class F5 to F9
Hi-Flo U-Series
®
Hi-Flo P, PL-Series
Hi-Flo T-Series
®
Hi-Flo M-Series
®
®
Airopac®
Page 41
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
27
Eurovent Certified Performance
Air filter certification You can count on
us!
Camfil Farr, in conjunction with the main independent test laboratories in
Europe, is committed to bringing you the highest levels of transparency
with regard to the new test protocols for air filters.
The European Committee for Standardisation has recently published a
new standard on "Particulate air filters for general ventilation determination of filtration performance". One of the aims of this new
standard is to detail the in-situ performance of an air filter.
This new test protocol provides accurate data on the effectiveness of
your air filters operating under real life conditions. Please always
specify filters tested in accordance with EN 779:2002. Your Camfil
representative is available to explain this standard in detail should you
require it - you can count on us!
Independent test results
Our Eurovent certification covers bag filters, compact filters and panel
filters in classes F5-F9, tested to EN 779:2002. The initial pressure
drop must remain within the tolerance levels set out in EN 779:2002.*
All filters that we officially market in brochures or on our website in
these filter classes are covered by the certification. Each class contains
a range of product groups:
• Same filter media/material (such as fibreglass)
Air filter performance
• Same basic design (such as bag filters, compact
filters etc)
•
•
•
Read more on Eurovent’s website: www.eurovent-certification.com
The filters are tested at independent test laboratories - in Sweden, the
Technical Research Institute of Sweden, SP, in Borås; in Finland, VTT in
Espoo. These are the only laboratories in Europe that are accredited to
ISO 17025.
The test laboratories are not told which company’s products they are
testing, but are only given a number that Eurovent assigns to each
individual filter.
Tolerance levels for initial pressure drop defined in EN 779:2002:
+(10%+Mt) or +(10Pa+Mt), whichever is highest. Mt = 5Pa (tolerance
level defined in EN 779:2002)
E
TIFICAT
ER
EN 779:2002
IN
DI
Eurovent’s certification of our fine-dust filters means that you can rest
assured that we live up to the performance requirements and the data
we print in our official documentation. Our fine-dust filters are tested by
independent laboratories selected by Eurovent and that means security
for you. Select Camfil air filters with Eurovent certification - its
guaranteed!
model, type, filter material, filter class as per EN
779:2002,
• Nominal airflow and initial pressure drop at nominal
airflow.
VI
DU
ALLY CER
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
28
TI
F
•
standard
Filters must be tested by independent laboratories SP in Sweden and VTT in Finland
The test laboratories must be ISO 17025 certified
We as manufacturers must be quality certified to ISO
9000 or a corresponding standard
Each year, Eurovent selects, at random, four new
filters from our range for inspection
• Published data must be available, specifying the
D
• Published data must be correct
• The products must comply with the EN 779:2002
• Same filter class: F5, F6, F7, F8, F9
IE
The key elements of the programme are that:
• Same or lower air speed/net filter area
C
At Camfil Farr we are going a step further to ensure the best possible
performance for our customers. The European ventilation industry
organisation Eurovent, in collaboration with several European air-filter
manufacturers, has developed a certification programme to guarantee
that our products live up to our promises.
Advantages
• Rubust construction
standard sizes
• Save energy - optimised design
• Certified performance
TIFICAT
ER
E
EN 779:2002
D
IN
W
IE
DI
VI
DU
ALLY CER
TI
F
D
• Large surface area
Application: Air conditioning applications.
Type: Extended surface multi pocket bag filter.
Media: Glass Fibre.
EN 779:2002 efficiency: F6 (55-65%), F7 (80-85%), F8/9 (90-95%).
Recommended final pressure drop: 450 Pa (suggested economical change point 250Pa).
FC Housings.
Unit
weight
kg
Unit
volume
m3
Energy
Rating
9.2
3400/65
3.3
0.05
B
10
7.7
2800/64
3.0
0.05
B
6
4.6
1700/65
1.9
0.03
B
F7
12
9.2
3400/85
2.9
0.05
A
F7
10
7.7
2800/83
2.5
0.05
A
F7
6
4.6
1700/85
1.7
0.03
A
F8/9
12
9.2
3400/130
2.9
0.05
A
F8/9
10
7.7
2800/128
2.6
0.05
A
F8/9
6
4.6
1700/130
1.8
0.03
A
Type
Model
Dimensions
(WxHxD)
535025A1
Hi-Flo
M6
592x592x635
F6
12
535002A1
Hi-Flo
N6
490x592x635
F6
535026A1
Hi-Flo
O6
287x592x635
F6
535025A2
Hi-Flo
M7
592x592x635
535002A2
Hi-Flo
N7
490x592x635
535026A2
Hi-Flo
O7
287x592x635
535025A3
Hi-Flo
M9
592x592x635
535002A3
Hi-Flo
N9
490x592x635
535026A3
Hi-Flo
O9
287x592x635
Air flow/pressure
drop m 3 /hr/Pa
Filter
of Media
classification EN Number
pockets
area m 2
779:2002
Reference
Other sizes are available on request - *Supplied with a 25mm header frame as standard, 20mm header available on request.
EFFICIENCY
GUARANTEE
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
29
C
(LCC)
• Controlled media spacing
(CMS)
Class F5 to F9
Hi-Flo ® M-Series
H10 to U17
Hi-Flo ® P, PL-Series
Advantages
standard sizes
TIFICAT
ER
E
C
(CMS)
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
W
F
D
Media: Glass Fibre.
Recommended final pressure drop: 450 Pa (suggested economical change point 250 Pa).
FC Housings.
Air flow/pressure
drop m 3 /hr/Pa
Unit
weight
kg
Unit
volume
m3
Energy
Rating
6.5
3400/70
2.9
0.05
B
8
5.2
2700/70
2.4
0.05
B
5
3.2
2100/95
1.6
0.03
B
F7
10
6.5
3400/105
2.6
0.05
B
F7
8
5.2
2700/105
2.4
0.05
B
F7
5
3.2
1700/105
1.6
0.03
B
F8
10
6.5
3400/150
2.4
0.05
B
490x592x534
F8
8
5.2
2700/150
2.4
0.05
B
287x592x534
F8
5
3.2
1700/150
1.6
0.03
B
PL6
592x892x534
F6
10
9.7
5100/70
4.4
0.10
B
QL6
490x892x534
F6
8
7.8
4200/70
4.0
0.11
B
RL6
287x892x534
F6
5
4.8
2550/70
2.6
0.05
B
PL7
592x892x534
F7
10
9.7
5100/110
3.8
0.11
B
Hi-Flo
QL7
490x892x534
F7
8
7.8
4200/110
3.6
0.11
B
Hi-Flo
RL7
287x892x534
F7
5
4.8
2550/110
2.2
0.05
B
Hi-Flo
PL9
592x892x534
F8/9
10
9.7
5100/153
4.1
0.11
B
Hi-Flo
QL9
490x892x534
F8/9
8
7.8
4200/154
3.7
0.11
B
Hi-Flo
RL9
287x892x534
F8/9
5
4.8
2550/151
2.5
0.05
B
Filter
of Media
classification EN Number
pockets
area m 2
779:2002
Reference
Type
Model
Dimensions
(WxHxD)
535027A1
Hi-Flo
P6
592x592x534
F6
10
535005A1
Hi-Flo
Q6
490x592x534
F6
535028A1
Hi-Flo
R6
287x592x534
F6
535027A2
Hi-Flo
P7
592x592x534
535005A2
Hi-Flo
Q7
490x592x534
535028A2
Hi-Flo
R7
287x592x534
535027A3
Hi-Flo
P9
592x592x534
535005A3
Hi-Flo
Q9
535028A3
Hi-Flo
R9
536004A1
Hi-Flo
536005A1
Hi-Flo
536006A1
Hi-Flo
536004A2
Hi-Flo
536005A2
536006A2
536004A3
536005A3
536006A3
Other sizes are available on request - *Supplied with a 25mm header as standard. 20mm header available on request.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
30
EFFICIENCY
GUARANTEE
Advantages
(CMS)
• High dust holding capacity
TIFICAT
ER
E
C
standard sizes
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
Media: Glass Fibre.
EN 779:2002 efficiency: F5 (40-50%), F6 (55-65%), F7 (80-85%), F8 (90-95%).
Eurovent 4/5 efficiency: EU5, EU6, EU7, EU8.
FC Housings.
Reference
Type
Model
Dimensions
(WxHxD)
Filter classification
EN 779:2002
Number of
pockets
Media
area m 2
Air flow/pressure drop
m 3 /hr/Pa
*35606060U
Hi-Flo
*3U-4050/6060/60
592x592x600
F5
8
6.0
3400/50
2.8
0.05
C
*35606038U
Hi-Flo
*3U-4050/6060/38
592x592x380
F5
8
3.8
2700/75
2.3
0.05
C
*35506060U
Hi-Flo
*3U-4050/5060/60
490x592x600
F5
6
4.6
2800/55
2.4
0.05
C
*35506038U
Hi-Flo
*3U-4050/5060/38
490x592x380
F5
6
2.9
2250/80
1.9
0.05
C
*35306060U
Hi-Flo
*3U-4050/3060/60
287x592x600
F5
4
3.0
1700/50
1.6
0.03
C
*35306038U
Hi-Flo
*3U-4050/3060/38
287x592x380
F5
4
1.9
1350/75
1.4
0.03
C
*36606060U
Hi-Flo
*3U-65/6060/60
592x592x600
F6
8
6.0
3400/80
2.8
0.05
B
*36606038U
Hi-Flo
*3U-65/6060/38
592x592x380
F6
8
3.8
2700/95
2.3
0.05
B
*36506060U
Hi-Flo
*3U-65/5060/60
490x592x600
F6
6
4.6
2600/80
2.4
0.05
B
*36506038U
Hi-Flo
*3U-65/5060/38
490x592x380
F6
6
2.9
2250/100
1.9
0.05
B
*36306060U
Hi-Flo
*3U-65/3060/60
287x592x600
F6
4
3.0
1700/80
1.6
0.03
B
*36306038U
Hi-Flo
*3U-65/3060/38
287x592x380
F6
4
1.9
1350/95
1.4
0.03
B
*37606060U
Hi-Flo
*3U-85/6060/60
592x592x600
F7
8
6.0
3400/125
2.8
0.05
B
*37606038U
Hi-Flo
*3U-85/6060/38
592x592x380
F7
8
3.8
2700/150
2.3
0.05
B
*37506060U
Hi-Flo
*3U-85/5060/60
490x592x600
F7
6
4.6
2600/125
2.4
0.05
B
*37506038U
Hi-Flo
*3U-85/5060/38
490x592x380
F7
6
2.9
2250/165
1.9
0.05
B
*37306060U
Hi-Flo
*3U-85/3060/60
287x592x600
F7
4
3.0
1700/125
1.6
0.03
B
*37306038U
Hi-Flo
*3U-85/3060/38
287x592x380
F7
4
1.9
1350/150
1.4
0.03
B
*38606060U
Hi-Flo
*3U-95/6060/60
592x592x600
F8
8
6.0
3400/185
2.8
0.05
B
*38606038U
Hi-Flo
*3U-95/6060/38
592x592x380
F8
8
3.8
2700/195
2.3
0.05
B
*38506060U
Hi-Flo
*3U-95/5060/60
490x592x600
F8
6
4.6
2600/185
2.4
0.05
B
*38506038U
Hi-Flo
*3U-95/5060/38
490x592x380
F8
6
2.9
2250/200
1.9
0.05
B
*38306060U
Hi-Flo
*3U-95/3060/60
287x592x600
F8
4
3.0
1700/185
1.6
0.03
B
*38306038U
Hi-Flo
*3U-95/3060/38
287x592x380
F8
4
1.9
1350/195
1.4
0.03
B
Energy
Rating
Unit volume
Unit
weight kg
m3
EFFICIENCY
GUARANTEE
Other sizes are available on request - *3 denotes a 25mm header frame, if a 20mm header frame is required please specify *2.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
31
Class F5 to F9
Hi-Flo ® U-Series
H10 to U17
Hi-Flo ® A-Series
Advantages
TIFICAT
ER
E
C
(CMS)
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
standard sizes
Media: Glass Fibre.
FC Housings.
EFFICIENCY
GUARANTEE
Unit volume
Unit
weight kg
m3
Type
Model
Dimensions
(WxHxD)
EN 779:2002
Number of
pockets
*35606060A
Hi-Flo
*3A-4050/6060/60
592x592x600
F5
6
4.7
3400/70
2.4
0.05
D
*35606038A
Hi-Flo
*3A-4050/6060/38
592x592x380
F5
6
2.9
2700/70
2.0
0.05
D
*35506060A
Hi-Flo
*3A-4050/5060/60
490x592x600
F5
5
3.9
2800/70
2.1
0.05
D
*35506038A
Hi-Flo
*3A-4050/5060/38
490x592x380
F5
5
2.4
2250/75
1.8
0.05
D
*35306060A
Hi-Flo
*3A-4050/3060/60
287x592x600
F5
3
2.3
1700/70
1.5
0.03
D
*35306038A
Hi-Flo
*3A-4050/3060/38
287x592x380
F5
3
1.5
1350/70
1.3
0.03
D
*36606060A
Hi-Flo
*3A-65/6060/60
592x592x600
F6
6
4.7
3400/70
2.4
0.05
B
*36606038A
Hi-Flo
*3A-65/6060/38
592x592x380
F6
6
2.9
2700/95
2.0
0.05
B
*36506060A
Hi-Flo
*3A-65/5060/60
490x592x600
F6
5
3.9
2800/75
2.1
0.05
B
*36506038A
Hi-Flo
*3A-65/5060/38
490x592x380
F6
5
2.4
2250/100
1.8
0.05
B
*36306060A
Hi-Flo
*3A-65/3060/60
287x592x600
F6
3
2.3
1700/70
1.5
0.03
B
*36306038A
Hi-Flo
*3A-65/3060/38
287x592x380
F6
3
1.5
1350/95
1.3
0.03
B
*37606060A
Hi-Flo
*3A-85/6060/60
592x592x600
F7
6
4.7
2700/105
2.4
0.05
C
*37606038A
Hi-Flo
*3A-85/6060/38
592x592x380
F7
6
2.9
2150/135
2.0
0.05
C
*37506060A
Hi-Flo
*3A-85/5060/60
490x592x600
F7
5
3.9
2250/100
2.1
0.05
C
*37506038A
Hi-Flo
*3A-85/5060/38
490x592x380
F7
5
2.4
1800/130
1.8
0.05
C
*37306060A
Hi-Flo
*3A-85/3060/60
287x592x600
F7
3
2.3
1350/115
1.5
0.03
C
*37306038A
Hi-Flo
*3A-85/3060/38
287x592x380
F7
3
1.5
1100/145
1.3
0.03
C
*38606060A
Hi-Flo
*3A-95/6060/60
592x592x600
F8
6
4.7
2700/175
2.4
0.05
C
*38606038A
Hi-Flo
*3A-95/6060/38
592x592x380
F8
6
2.9
2150/220
2.0
0.05
C
*38506060A
Hi-Flo
*3A-95/5060/60
490x592x600
F8
5
3.9
2250/180
2.1
0.05
C
*38506038A
Hi-Flo
*3A-95/5060/38
490x592x380
F8
5
2.4
1800/225
1.8
0.05
C
*38306060A
Hi-Flo
*3A-95/3060/60
287x592x600
F8
3
2.3
1350/170
1.5
0.03
C
*38306038A
Hi-Flo
*3A-95/3060/38
287x592x380
F8
3
1.5
1100/215
1.3
0.03
C
Other sizes are available on request - *3 denotes a 25mm header frame, if a 20mm header frame is required please specify *2.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
32
Energy
Rating
Media
Air flow/pressure drop
surface m 2
m 3 /hr/Pa
Reference
Advantages
(CMS)
• Ultra compact
TIFICAT
ER
E
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
Type: Compact multi-pocket bag filter.
Media: Glass Fibre.
FC Housings.
Air flow/pressure
drop m 3 /hr/Pa
12
5.5
3400/90
2.3
0.05
F6
10
4.5
2800/90
2.2
0.05
F6
6
2.7
1700/90
1.4
0.03
592x592x380
F7
12
5.5
3400/130
2.3
0.05
490x592x380
F7
10
4.5
2800/130
2.1
0.05
F7
6
2.7
1700/130
1.4
0.03
F8/9
12
5.5
3400/205
2.3
0.05
F8/9
10
4.5
2800/205
2.0
0.05
F8/9
6
2.7
1700/205
1.4
0.03
Type
Model
Dimensions
(WxHxD)
Filter classification Number of
EN 779:2002
pockets
535023A1
Hi-Flo
*TM6
592x592x380
F6
535024A1
Hi-Flo
TN6
490x592x380
535022A1
Hi-Flo
TO6
287x592x380
535023A2
Hi-Flo
TM7
535024A2
Hi-Flo
TN7
535022A2
Hi-Flo
TO7
287x592x380
535023A3
Hi-Flo
TM9
592x592x380
535024A3
Hi-Flo
TN9
490x592x380
535022A3
Hi-Flo
TO9
287x592x380
Unit
Unit
weight kg volume m 3
Media
area m 2
Reference
Other sizes are available on request - *Supplied with a 25mm header frame as standard. 20mm header available on request.
EFFICIENCY
GUARANTEE
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
33
C
Class F5 to F9
Hi-Flo ® T-Series
H10 to U17
Bag Filters Synthetic Media
S-Flo W P Series
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
• Extended surface multi-pocket
• High efficiency
filter
standard sizes
• Unique pocket design
(CMS)
Media: Synthetic Fibres.
EN 779:2002 efficiency: F6 (55-65%), F7 (80-85%), F8 (90-95%).
FC Housings.
Filter
Air flow/
Unit
Unit
of Media weight
classification EN pressure drop Number
2
pockets
area
m
volume
m3
779:2002
m³/hr/Pa
kg
Reference
Type
Model
Dimensions
(WxHxD) mm
*36606053PW
S-Flo-W
*P6
592x592x534
F6
3400/45
10
6,5
2,7
0,05
D
*36506053PW
S-Flo-W
*Q6
490x592x534
F6
2800/45
8
5,2
2,4
0,05
D
*36306053PW
S-Flo-W
*R6
287x592x534
F6
1700/45
5
3,2
1,6
0,03
D
*37606053PW
S-Flo-W
*P7
592x592x534
F7
3400/75
10
6,5
2,7
0,05
E
*37506053PW
S-Flo-W
*Q7
490x592x534
F7
2800/75
8
5,2
2,4
0,05
E
*37306053PW
S-Flo-W
*R7
287x592x534
F7
1700/75
5
3,2
1,6
0,03
E
*38606053PW
S-Flo-W
*P8
592x592x534
F8
3400/95
10
6,5
2,7
0,05
E
*38506053PW
S-Flo-W
*Q8
490x592x534
F8
2800/95
8
5,2
2,4
0,05
E
*38306053PW
S-Flo-W
*R8
287x592x534
F8
1700/95
5
3,2
1,6
0,03
E
Other sizes are available on request - *Supplied with a 25mm header frame, if a 20mm header frame is required please specify *2.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
34
Energy
Rating
TIFICAT
ER
E
C
Advantages
TIFICAT
ER
E
C
Advantages
EN 779:2002
DI
DU
ALLY CER
TI
F
W
D
standard sizes
(CMS)
EN 779:2002 efficiency: F6 (55-65%), F7 (80-85%), F8 (90-95%).
FC Housings.
Media
area m 2
Unit weight
kg
Unit volume
m3
Energy
Rating
3400/46
8
6
2,8
0,05
F
F5
2550/33
8
3,8
2,3
0,05
F
F5
2800/46
6
4,6
2,4
0,05
F
490x592x380
F5
2100/33
6
2,9
1,9
0,05
F
*UH5
287x592x600
F5
1700/46
4
3
1,6
0,03
F
S-Flo-W
*UH5/38
287x592x380
F5
1275/33
4
1,9
1,4
0,03
F
S-Flo-W
*UF6
592x592x600
F6
3400/50
8
6
2,8
0,05
E
*36606038UW
S-Flo-W
*UF6/38
592x592x380
F6
2550/37
8
3,8
2,3
0,05
E
*36506060UW
S-Flo-W
*UG6
490x592x600
F6
2800/50
6
4,6
2,4
0,05
E
*36506038UW
S-Flo-W
*UG6/38
490x592x380
F6
2100/37
6
2,9
1,9
0,05
E
*36306060UW
S-Flo-W
*UH6
287x592x600
F6
1700/50
4
3
1,6
0,03
E
*36306038UW
S-Flo-W
*UH6/38
287x592x380
F6
1275/37
4
1,9
1,4
0,03
E
*37606060UW
S-Flo-W
*UF7
592x592x600
F7
3400/60
8
6
2,8
0,05
E
*37606038UW
S-Flo-W
*UF7/38
592x592x380
F7
2550/61
8
3,8
2,3
0,05
E
*37506060UW
S-Flo-W
*UG7
490x592x600
F7
2800/60
6
4,6
2,4
0,05
E
*37506038UW
S-Flo-W
*UG7/38
490x592x380
F7
2100/61
6
2,9
1,9
0,05
E
*37306060UW
S-Flo-W
*UH7
287x592x600
F7
1700/60
4
3
1,6
0,03
E
*37306038UW
S-Flo-W
*UH7/38
287x592x380
F7
1275/61
4
1,9
1,4
0,03
E
*38606060UW
S-Flo-W
*UF8
592x592x600
F8
3400/80
8
6
2,8
0,05
E
*38606038UW
S-Flo-W
*UF8/38
592x592x380
F8
3400/140
8
3,8
2,3
0,05
E
*38506060UW
S-Flo-W
*UG8
490x592x600
F8
2800/80
6
4,6
2,4
0,05
E
*38506038UW
S-Flo-W
*UG8/38
490x592x380
F8
2800/140
6
2,9
1,9
0,05
E
*38306060UW
S-Flo-W
*UH8
287x592x600
F8
1700/80
4
3
1,6
0,03
E
*38306038UW
S-Flo-W
*UH8/38
287x592x380
F8
1700/140
4
1,9
1,4
0,03
E
Model
Dimensions
(WxHxD) mm
Filter classification Air flow/pressure drop
EN 779:2002
m³/hr/Pa
*35606060UW
S-Flo-W
*UF5
592x592x600
F5
*35606038UW
S-Flo-W
*UF5/38
592x592x380
*35506060UW
S-Flo-W
*UG5
490x592x600
*35506038UW
S-Flo-W
*UG5/38
*35306060UW
S-Flo-W
*35306038UW
*36606060UW
Type
Number of
pockets
Reference
Other sizes are available on request - *Supplied with a 25mm header frame, if a 20mm header frame is required please specify *2.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
35
IE
D
IN
VI
• Multi-pocket bag filter
Class F5 to F9
S-Flo W U Series
H10 to U17
S-Flo W A Series
Advantages
• Multi-pocket bag filter
• Available in a range of
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
efficiencies
FC Housings.
Unit
weight
kg
Unit
volume
m3
4,70
2,40
0,050
2,90
2,00
0,050
5
3,90
2,00
0,050
5
2,40
1,80
0,050
1700/51
3
2,30
1,50
0,030
1275/36
3
1,50
1,30
0,030
F6
3400/55
6
4,70
2,40
0,050
F6
2550/40
6
2,90
2,00
0,050
490x592x600
F6
2800/55
5
3,90
2,00
0,050
490x592x380
F6
2100/40
5
2,40
1,80
0,050
*C6
287x592x600
F6
1700/55
3
2,30
1,50
0,030
*C6/38
287x592x380
F6
1275/40
3
1,50
1,30
0,030
*A7
592x592x600
F7
2550/52
6
4,70
2,40
0,050
*A7/38
592x592x380
F7
2550/80
6
2,90
2,00
0,050
*B7
490x592x600
F7
2100/52
5
3,90
2,00
0,050
*B7/38
490x592x380
F7
2100/80
5
2,40
1,80
0,050
*C78
287x592x600
F7
1275/52
3
2,30
1,50
0,030
*C7/38
287x592x380
F7
1275/80
3
1,50
1,30
0,030
*A8
592x592x600
F8
3400/100
6
4,70
2,40
0,050
*A8/38
592x592x380
F8
3400/195
6
2,90
2,00
0,050
*B8
490x592x600
F8
2800/100
5
3,90
2,00
0,050
*B8/38
490x592x380
F8
2800/195
5
2,40
1,80
0,050
*C8
287x592x600
F8
1700/100
3
2,30
1,50
0,030
*C8/38
287x592x380
F8
1700/195
3
1,50
1,30
0,030
Model
Dimensions
(WxHxD) mm
Filter
classification EN
779:2002
Air flow/pressure
drop m³/hr/Pa
S-Flo-W
*A5
592x592x600
F5
3400/50
6
S-Flo-W
*A5/38
592x592x380
F5
2250/36
6
S-Flo-W
*B5
490x592x600
F5
2800/50
S-Flo-W
*B5/38
490x592x380
F5
2100/36
S-Flo-W
*C5
287x592x600
F5
S-Flo-W
*C5/38
287x592x380
F5
S-Flo-W
*A6
592x592x600
S-Flo-W
*A6/38
592x592x380
S-Flo-W
*B6
S-Flo-W
*B6/38
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
S-Flo-W
Reference
Type
*35606060AW
*35606038AW
*35506060AW
*35506038AW
*35306060AW
*35306038AW
*36606060AW
*36606038AW
*36506060AW
*36506038AW
*36306060AW
*36306038AW
*37606060AW
*37606038AW
*37506060AW
*37506038AW
*37306060AW
*37306038AW
*38606060AW
*38606038AW
*38506060AW
*38506038AW
*38306060AW
*38306038AW
Number of Media
pockets area m 2
Other sizes are available on request - *Supplied with a 25mm header frame, if a 20mm header frame is required please specificy *2.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
36
TIFICAT
ER
E
C
standard sizes
Advantages
• Long operating life
optimised for LCC
TIFICAT
ER
E
C
• Light and robust
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
W
F
D
Application: Air conditioning applications and preparatory filtration in clean rooms.
Type: High efficiency, incinerable filter.
Frame: 25mm thick flange, polypropylene and ABS.
Media: Glass fibre paper.
Separator: Hot-melt beads.
Sealant: Polyurethane.
EN 779:2002 efficiency: F6, F7, F8, F9.
Opacimetric efficiency: 65, 85, 95, 98%.
EUROVENT 4/5 efficiency: EU6, EU7, EU8, EU9.
Mounting system: Front and side access housing and frames are available, Type 8, Type L
and FC housings.
Type
Model
Dimensions
(WxHxD) mm
Filter
classification
EN 779:2002
Media Air flow/pressure Unit
area
weight
drop m 3 /h/Pa
kg
m2
Unit
volume
m3
Energy
Rating
1511.11.50
OPAKFIL-G -65
3OPGHF-242412-60
592x592x290
F6
19.0
4250/100
5
0.11
B
1511.21.50
OPAKFIL-G -65
3OPGHF-242012-60
592x490x290
F6
15.0
3400/100
4
0.09
B
1511.51.50
OPAKFIL-G -65
3OPGHF-241212-60
592x287x290
F6
9.0
2125/100
3
0.05
B
1511.12.50
OPAKFIL-G -85
3OPGHF-242412-90
592x592x290
F7
19.0
4250/110
5
0.11
A
1511.22.50
OPAKFIL-G -85
3OPGHF-242012-90
592x490x290
F7
15.0
3400/110
4
0.09
A
1511.52.50
OPAKFIL-G -85
3OPGHF-241212-90
592x287x290
F7
9.0
2125/135
3
0.05
A
1511.13.50
OPAKFIL-G -95
3OPGHF-242412-95
592x592x290
F8
19.0
4250/130
5
0.11
A
1511.23.50
OPAKFIL-G -95
3OPGHF-242012-95
592x490x290
F8
15.0
3400/130
4
0.09
A
1511.53.50
OPAKFIL-G -95
3OPGHF-241212-95
592x287x290
F8
9.0
2125/150
3
0.05
A
1511.17.50
OPAKFIL-G-98
3OPGHF-242412-98
592x592x290
F9
19.0
4250/160
5
0.11
B
1511.24.50
OPAKFIL-G-98
3OPGHF-242012-98
592x490x290
F9
15.0
3400/160
4
0.09
B
1511.57.50
OPAKFIL-G-98
3OPGHF-241212-98
592x287x290
F9
9.0
2125/160
3
0.05
B
Reference
EFFICIENCY
GUARANTEE
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
37
• Less frequent changes
Class F5 to F9
Opakfil Green
H10 to U17
Compact Filter
High Efficiency Panel
Ecopleat & Ecopleat MCTA
TIFICAT
ER
E
C
Advantages
EN 779:2002
D
IN
W
IE
DI
VI
DU
ALLY CER
TI
F
D
• Ultra compact
• Savings in operating costs
• 10 times more filtration surface
Application: Air conditioning or industrial processing systems and for mini air conditioning
systems, individual modules.
Type: High efficiency compact filter.
Frame: Galvanised steel.
EN 779:2002 efficiency: F6, F7.
Opacimetric efficiency: 65, 85%.
Recommended final pressure drop: Ecopleat: 350 Pa - Ecopleat MCTA: 250 Pa.
Air flow/pressure
Filter
Unit
Media
3
classification EN
2 drop at 0.45 m/s m / weight
area m
779:2002
kg
h/Pa
Unit
volume
m3
Energy
Rating
2
0.01
D
3
0.02
D
1700/110
2
0.01
D
3400/110
3
0.02
D
4000/85
4
0.04
D
715/65
1.5
0.01
D
2.1
665/55
1.5
0.01
D
3.6
1100/45
2
0.01
D
4.8
1570/50
3
0.01
D
2.85
1500/175
2
0.01
B
5.89
3000/160
3
0.02
B
3.13
1700/175
2
0.01
B
F7
6.25
3400/175
3
0.02
B
F7
14.1
4000/120
4
0.04
B
352x225x48
F6
1.3
350/38
1
0.01
D
400x240x48
F6
1.6
340/25
1.2
0.01
D
MCTA
470x240x48
F6
1.9
680/50
1.3
0.01
D
MCTA
550x240x48
F6
2.2
680/42
1.4
0.01
D
Reference
Type
Model
Dimensions
(WxHxD)
1020.07.00
ECOPLEAT
Ecopleat F6
287x592x48
F6
2.85
1500/105
1020.08.00
ECOPLEAT
Ecopleat F6
592x592x48
F6
5.89
3000/100
1020.05.00
ECOPLEAT
Ecopleat F6
305x610x48
F6
3.13
1020.06.00
ECOPLEAT
Ecopleat F6
610x610x48
F6
6.25
1020.16.00
ECOPLEAT
Ecopleat F6
610x610x98
F6
14.1
1020.80.02
ECOPLEAT
Ecopleat F6
560x190x48
F6
1.8
1020.80.03
ECOPLEAT
Ecopleat F6
255x480x48
F6
1020.80.04
ECOPLEAT
Ecopleat F6
255x830x48
F6
1020.80.05
ECOPLEAT
Ecopleat F6
255x1130x48
F6
1021.07.00
ECOPLEAT
Ecopleat F7
287x592x48
F7
1021.08.00
ECOPLEAT
Ecopleat F7
592x592x48
F7
1021.05.00
ECOPLEAT
Ecopleat F7
305x610x48
F7
1021.06.00
ECOPLEAT
Ecopleat F7
610x610x48
1021.16.00
ECOPLEAT
Ecopleat F7
610x610x98
1020.80.01
ECOPLEAT
MCTA
1020.80.10
ECOPLEAT
MCTA
1020.80.11
ECOPLEAT
1020.80.12
ECOPLEAT
Other dimensions available - Other models available, contact us - Also available in incinerable version: Ecopleat Green.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
38
EFFICIENCY
GUARANTEE
Advantages
• Range of standard sizes
• High efficiency
• Rigid design concept
• Suitable for turbulent airflow
TIFICAT
ER
E
C
Type: Rigid pleated filter.
Media: Glass fibre.
Holding frames: Front and side access housings and frames are available.
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
Reference
Type
Model
Dimensions (WxHxD) mm
779:2002
Media surface
m2
060558-007
Riga Flo
Riga Flo 10
594x594x292
F5
5.4
3420/65
7.70
060558-012
Riga Flo
Riga Flo 10
492x594x292
F5
4.4
2790/65
5.77
0.11
060558-008
Riga Flo
Riga Flo 10
289x594x292
F5
2.6
1710/65
4.55
0.06
078367-007
Riga Flo
Riga Flo 10
594x594x152
F5
2.7
2070/55
3.42
0.06
078367-016
Riga Flo
Riga Flo 10
492x594x152
F5
2.2
1710/55
2.57
0.06
078367-008
Riga Flo
Riga Flo 10
289x594x152
F5
1.3
990/55
2.21
0.03
060558-001
Riga Flo
Riga Flo 15
594x594x292
F6
5.4
3420/70
7.70
0.11
060558-009
Riga Flo
Riga Flo 15
492x594x292
F6
4.4
2790/70
5.77
0.11
060558-004
Riga Flo
Riga Flo 15
289x594x292
F6
2.6
1710/70
4.55
0.06
078367-001
Riga Flo
Riga Flo 15
594x594x152
F6
2.7
2070/65
3.42
0.06
078367-013
Riga Flo
Riga Flo 15
492x594x152
F6
2.2
1710/65
2.57
0.06
078367-004
Riga Flo
Riga Flo 15
289x594x152
F6
1.3
990/65
2.21
0.03
060558-002
Riga Flo
Riga Flo 100
594x594x292
F7
5.4
3420/90
7.70
0.11
060558-010
Riga Flo
Riga Flo 100
492x594x292
F7
4.4
2790/90
5.77
0.11
060558-005
Riga Flo
Riga Flo 100
289x594x292
F7
2.6
1710/90
4.55
0.06
078367-002
Riga Flo
Riga Flo 100
594x594x152
F7
2.7
2070/90
3.42
0.06
078367-014
Riga Flo
Riga Flo 100
492x594x152
F7
2.2
1710/90
2.57
0.06
078367-005
Riga Flo
Riga Flo 100
289x594x152
F7
1.3
990/90
2.21
0.03
060558-003
Riga Flo
Riga Flo 200
594x594x292
F8
5.4
3420/130
7.70
0.11
060558-011
Riga Flo
Riga Flo 200
492x594x292
F8
4.4
2790/130
5.77
0.11
060558-006
Riga Flo
Riga Flo 200
289x594x292
F8
2.6
1710/130
4.55
0.06
078367-003
Riga Flo
Riga Flo 200
594x594x152
F8
2.7
2070/175
3.42
0.06
078367-015
Riga Flo
Riga Flo 200
492x594x152
F8
2.2
1710/175
2.57
0.06
078367-006
Riga Flo
Riga Flo 200
289x594x152
F8
1.3
990/175
2.21
0.03
Air flow/presure drop at m 3 / Unit weight kg
Unit volume m 3
h/Pa
0.11
Other sizes are available on request - PH version also available (with header frame)
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
39
EFFICIENCY
GUARANTEE
Class F5 to F9
Riga-Flo
H10 to U17
OpakAir
TIFICAT
ER
E
C
Advantages
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
• Up to 6000 m 3 /hr air flow
Application: High air flow air conditioning and process air applications.
Type: High capacity compact filter.
Gasket: Half round EDPM.
EN 779:2002 efficiency: F8.
Opacimetric efficiency: 95%.
Mounting System: Front and side access housings and safechange systems are available.
EFFICIENCY
GUARANTEE
1514.13.05 OPAKAIR -95
OPR-E-F8
610x610x292
F8
4500/110
19,0
18,00
0,11
1514.53.05 OPAKAIR -95
OPR-E-F8
305x610x292
F8
2250/110
10,0
9,00
0,06
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
40
Unit
Unit
Dimensions
(WxHxD) mm
Type
Filter classification Air flow/pressure drop
EN 779:2002
m³/hr/Pa
Media
area m 2
Model
Reference
Advantages
W
D
Application: Air conditioning applications and preparatory filtration in clean rooms.
Type: High efficiency compact filter, HF model with header frame.
Opacimetric efficiency: 85%.
Mounting system: Front and side access housing and frames are available, type 8, type L and
FC housings.
Media area
Unit
Unit
m2
Reference
Type
Model
Dimensions
(WxHxD) mm
Air flow/nominal
pressure drop m³/h/Pa
Energy
Rating
304215
Airopac-90
3GGM-24246-90
610x610x150
3600/105
12,3
6,8
0,06
B
304219
Airopac-90
3GGM-12246-90
305x610x150
1800/110
6,1
4,0
0,03
B
Airopac-HF-90 3GGMHF-24245-90
592x592x135
3600/135
10,3
6,8
0,05
B
301739
Airopac-HF-90 3GGMHF-12245-90
287x592x135
1800/160
4,5
3,8
0,02
B
301732
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
41
EFFICIENCY
GUARANTEE
Class F5 to F9
Airopac ®
H10 to U17
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
42
Notes
Page 46
Page 47
Page 48
HEPA/ULPA Panels
Megalam MD, MX, MG
HEPA/ULPA Panels
Megalam MX & MG - H14
HEPA/ULPA Panels
Megalam MD - H10 & H14
HEPA/ULPA Panels
Megalam MD & MG - U15
Page 49
Page 50
Page 51
Page 52
HEPA/ULPA Panels
Megalam (Laminator) MDL &
MXL - U15 & U16
HEPA/ULPA Panels
Silent Hood Diffuser - H14
HEPA/ULPA Panels
HEPA/ULPA Panels
Megalam U (Gel) - H14 & U15 Megalam T (Gel) - H14 & U15
Page 55
Page 56
Page 53
Page 54
H10 to U17
Page 45
HEPA/ULPA Panels
Megalam MD & MX e-PTFE U15
Page 57
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
43
Filters for High Efficiency Filters for High Efficiency Filters for High Efficiency Filters for High Efficiency
Sofilair - H10 to H14
Sofilair Green
Close Pleat - H13
Opakfil G Micretain - H10
Class F5 to F9
Summary HEPA / ULPA Filters, Class H10 to U17
H E PA / U L PA F i l t e r s , C l a s s H 1 0 t o U 1 7
HEPA / ULPA Filters, Class H 10 to U 1 7
European Standard EN 1822
EN1822
SOFILAIR and MEGALAM… what you can
expect: 100% control of everything we
produce.
• Qualified personnel responsible for testing.
• Unique serial number for each filter.
• Clear, unambiguous control procedures specifying test
conditions, target values and actual performance of
our filters.
• Complete traceability of materials and operations.
• Equipment and systems certified by accredited
bodies.
• Tested performance verified by installation testing
and validation.
The CAMFIL extra:
• Individual test results are recorded on a unique
product label. The label has a detachable copy which
can be used to record the position of the individual
filters within your process.
• It can also be used as part of the validation process
ensuring regulatory compliance of your installation.
In short EN 1822 means:
• Individually certified filters
• Tested using MPPS (Most Penetrating Particle Size)
challenge.
• Explicit, standardised test procedures.
• Full traceability of materials and test data.
• NB: the filter grades EU13 etc, are incompatible with
EN 1822.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
44
All HEPA / ULPA filters produced by
Camfil are supplied fully in accordance
with the European Standard EN 1822
Advantages
Type
Application: Very high efficiency final filtration in air conditioning systems, housings and
diffusers.
Type: High air flow HEPA filter.
Gasket: One piece half round continuous gasket.
EN 1822 efficiency: H10, H12, H13, and H14.
MPPS efficiency: H10:>85%, H12:>99.5%, H13:>99.95%, H14:> 99.995%.
Maximum air flow rate: See table, use nominal values otherwise a reduction in efficiency may
occur.
Mounting systems: Front and side access filter frames, FC Housings, terminal housings and
safe change systems.
Dimensions
(WxHxD) mm
Model
with filter changes
Filter classification Media
EN 1822
area m 3
Air flow/preassure
drop m 3 /h/Pa
Unit
Unit
1575.02.00 Sofilair H10 SFR-E-2000-H10
305x610x292
H10
14
2000/230
8
0,06
1573.02.00 Sofilair H10 SFR-E-4000-H10
610x610x292
H10
21
4000/230
13
0,11
1570.01.00 Sofilair H10 SFR-E-5000-H10
610x610x292
H10
35
5000/230
16,5
0,11
1585.01.00 Sofilair H12 SFR-E-1500-H12
305x610x292
H12
16
1500/250
8,5
0,06
1580.01.00 Sofilair H12 SFR-E-3400-H12
610x610x292
H12
33
3400/250
16,5
0,11
1580.02.00 Sofilair H12 SFR-E-4000-H12
610x610x292
H12
40
4000/250
16,5
0,11
1568.01.00 Sofilair H13 SFR-E-1300-H13
289x595x292
H13
16
1300/250
8,5
0,06
1565.01.00 Sofilair H13 SFR-E-1500-H13
305x610x292
H13
16
1500/250
8,5
0,06
1567.01.00 Sofilair H13 SFR-E-3200-H13
595x595x292
H13
38
3200/250
15,5
0,11
1560.01.00 Sofilair H13 SFR-E-3400-H13
610x610x292
H13
33
3400/250
16,5
0,11
1560.02.00 Sofilair H13 SFR-E-4000-H13
610x610x292
H13
40
4000/250
16,5
0,11
1560.02.20 Sofilair H13 SFR-E-5000-H13
610x610x292
H13
40
5000/400
16,5
0,11
1565.01.02 Sofilair H14 SFR-E-1400-H14
610x305x292
H14
16
1400/280
1500/310*
8,5
0,06
1560.02.06 Sofilair H14 SFR-E-3500-H14
610x610x292
H14
40
3500/270
4000/310*
16,5
0,11
Reference
D
W
• New ergonomic handle to assist
m 3 /hr
• Tested in accordance with
EN 1822
*Maximum airflow
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
45
EN1822
• High air flow rates, up to 5000
Class F5 to F9
Sofilair - H10 to H14
H10 to U17
Filters for High Efficiency
Sofilair Green
Advantages
• Totally incinerable
• New ergonomic handle to assist
with filter changes
• High air flow rates
• Corrosion resistant
• Light weight construction
W
D
Unit
weight
kg
Unit
volume
m3
2000/230
6
0,06
5000/230
12
0,11
1500/250
10
0,06
4000/250
13,5
0,11
1500/250
6
0,06
4000/250
12
0,11
15
1400/280
1500/310*
6
0,06
38
3500/270
4000/310*
12
0,11
Model
Dimensions
(LxHxD)
mm
1575.82.00 Sofilair Green H10
SFRG-P-2000-H10
305x610x292
H10
13
SFRG-P-5000-H10
610x610x292
H10
33
SFRG-P-1500-H12
305x610x292
H12
15
SFRG-P-4000-H12
610x610x292
H12
38
SFRG-P-1500-H13
305x610x292
H13
15
SFRG-P-4000-H13
610x610x292
H13
38
SFRG-P-1400-H14
305x610x292
H14
SFRG-P-3500-H14
610x610x292
H14
Reference
Type
Filter
Media area
classification
m2
EN 1822
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
46
Airflow/pressure
drop m 3 /h/Pa
EN1822
Application: High efficiency final filtration in air conditioning systems, extraction from corrosive
or hazardous environments.
Type: High air flow incinerable HEPA filter.
Frame: ABS.
Gasket: One piece half round continuous gasket.
EN 1822 efficiency: H10, H12, H13, H14.
MPPS efficiency: H10:>85%, H13:>99.95 & H14:>99.995%.
occur.
Mounting systems: Front and side access filter frames. Terminal housings and safe change
systems.
Close Pleat - H13
Advantages
Type
Model
Dimensions
(WxHxD) mm
Unit
Filter classification Air flow/pressure drop Media area
Unit
EN 1822
m³/hr/Pa
m2
229004A1
Steel case HEPA TREA-1000
610x610x292
H13
2700 / 250
229002A1
Steel case HEPA
TREA-450
305x610x292
H13
1350 / 250
231007A1
Steel case HEPA
MXEA-600
610x610x150
H13
1625 / 250
231004A1
Steel case HEPA
MXEA-220
305x610x150
H13
820 / 250
226001A1
MDF case HEPA TRSA-1000
610x610x292
H13
2450 / 250
226003A1
MDF case HEPA
TRSA-450
305x610x292
H13
1160 / 250
225006A1
MDF case HEPA
MXSA-600
610x610x150
H13
1475 / 250
225007A1
MDF case HEPA
MXSA-220
305x610x150
H13
690 / 250
23,5
13
0,13
11,7
7
0,07
13,4
12
0,07
6,7
6
0,04
21,4
13
0,13
10,1
7
0,07
12,1
12
0,07
5,7
6
Alternative models, sizes and constructions are available.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
47
Reference
D
Class F5 to F9
W
EN1822
Application: Very high efficiency final filtration in air conditioning systems, housings, ducts and
diffusers.
Type: Close pleated very high efficiency filter.
Frame: Galvanised steel / MDF.
Gasket: Half round continuous expanded polyurethane.
Media: Pleated glass paper.
Separator: Hot melt beads.
EN 1822 efficiency: H13.
MPPS efficiency: ≥ 99.95%.
DOP efficiency ≈ 0.3 μm: ≥ 99.99%.
Maximum flow rate: See table, use nominal values otherwise a reduction in efficiency may
occur.
Mounting systems: FCB Housings, Ducts, Diffusers, CAMSAFE.
• Very high efficiency
• Compact design concept
H10 to U17
Opakfil G Micretain - H10
Advantages
• Easy to install
• Up to 4000 m 3 /hr air flow
• Incinerable
D
Air flow /
Filter
Media pressure
drop
classification EN
2
area m
1822
m 3 /hr/Pa
Unit
weight
kg
Unit
volume
m3
1700/250
3
0.06
4000/250
6
0.11
9.0
1700/250
3
0.06
19.0
4000/250
6
0.11
Reference
Type
Model
Dimensions
(WxHxD) mm
1511.36.51
70PGHF-241212
Opakfil-G Micretain
592x287x290-01
H10
9.0
1511.35.51
70PGHF-242412
Opakfil-G Micretain
592x592x290-01
H10
19.0
1511.36.52
70PGHF-241212
Opakfil-G Micretain
592x287x290-10
H10
1511.35.52
70PGHF-242412
Opakfil-G Micretain
592x592x290-10
H10
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
48
W
Application: Final filtration in air conditioning systems, industrial processes.
Type: Very high efficiency, incinerable, compact filter.
Frame: 25 mm thick flange, polypropylene and ABS.
Gasket: Half round continuous expanded polyurethane. Position: 01- rear, 10- front.
MPPS efficiency: ≥ 85%.
occur.
Holding Frames: Front and side access housings and frames are available. Type 8, Type L and
FC housings.
Megalam MD, MX, MG
Advantages
• Less pressure drop
• Longer operating life
• Quieter
• Higher flow rate
Example: Megalam H14 / 6P6
Filter area
Maximum pressure drop
W
D
MX
MG
2
2
18m2
90 Pa (-25%)
70 Pa (-40%)
10m
Pressure drop 0.45 m/s (600m3/h)
EN1822
MD
120 Pa
3
900 m /h (190 Pa)
Energy
3
600 m /h (90 Pa)
2000 m3/h (250 Pa)
-25%
-42%
x 1.5
x 2.5
Less pressure loss
More Flow
Lower pressure drop
Higher airflow rate
More energy savings
Longer operating life
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
49
H10 to U17
Lifespan
12.5m
Class F5 to F9
H E PA / U L PA P a n e l s
Megalam MX & MG - H14
Advantages
• Longer operating life
• Quiet: LW = 35dB
• Individually scanned in
accordance with EN 1822
• Higher flow rate
W
D
Med
Filter
classifica ia
tion EN area
1822
m2
Air flow/
Unit
pressure Unit volu
weig
drop max
me
ht kg
m 3 /h/Pa
m3
Type
Model
Dimensions
(WxHxD) mm
3440.00.20
MEGALAM MXA
3P6
305x610x90
H14
6.3
300/90
650/195
3.0
0.02
3440.00.30
MEGALAM MXA
6P6
610x610x90
H14
12.7
600/90
1300/195
6.0
0.05
3440.00.40
MEGALAM MXA
9P6
915x610x90
H14
19.1
900/90
1950/195
9.0
0.05
3440.00.50
MEGALAM MXA
12P6
1220x610x90
H14
28.3
1200/90
2500/195
12.0
0.07
3444.00.20
MEGALAM MGA
3P6
305x610x110
H14
9.8
300/70
1000/220
5.0
0.02
3444.00.30
MEGALAM MGA
6P6
610x610x110
H14
19.8
600/70
2000/220
8.0
0.04
3444.00.40
MEGALAM MGA
9P6
915x610x110
H14
27.0
900/70
3000/220
10.0
0.06
3444.00.50
MEGALAM MGA
12P6
1220x610x110
H14
36.3
1200/70
4000/220
13.0
0.08
Other dimensions available on request - Also available with laminator
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
50
Air flow/
pressure
drop m/s
m 3 /h/Pa
Reference
EN1822
Application: Final or return filtration for clean rooms with turbulent flow.
Type: HEPA filtering panel with seal for mechanical clamping systems.
Frame: Extruded and anodised aluminium.
Grid: Mild steel painted grille upstream and downstream.
Maximum flow rate: see table, use nominal values otherwise a reduction in efficiency may
occur.
Test: 100% individually scanned to EN 1822.
Mounting system: Mechanical clamping structure, Terminal housing.
Megalam MD - H10 & H14
Advantages
• Guaranteed performance
• Protection via 2 grids
Reference
Type
Model
Dimensions
(WxHxD) mm
Filter
classification EN
1822
Media
area m 2
Air flow / pressure
drop at 0.45 m/s
m 3 /h/Pa
Unit
weight
kg
Unit
volume
m3
3401.61.11
MEGALAM MDM
3P6
305x610x66
H10
4.6
300/70
2.0
0.02
3401.62.08
MEGALAM MDM
6P6
610x610x66
H10
9.3
600/70
4.0
0.03
3401.63.01
MEGALAM MDM
9P6
915x610x66
H10
14.0
900/70
6.0
0.05
3401.64.07
MEGALAM MDM
12P6
1220x610x66
H10
18.5
1200/70
9.0
0.07
3423.00.10
MEGALAM MDA
3P3
305x305x66
H14
2.4
150/140
1.0
0.01
3423.00.20
MEGALAM MDA
3P6
305x610x66
H14
4.8
300/130
3.0
0.02
3423.00.30
MEGALAM MDA
6P6
610x610x66
H14
10.0
600/120
5.0
0.03
3423.00.90
MEGALAM MDA
7P6
762x610x66
H14
12.3
750/120
5.0
0.04
3423.00.40
MEGALAM MDA
9P6
915x610x66
H14
14.8
900/120
6.0
0.05
3423.00.50
MEGALAM MDA
12P6
1220x610x66
H14
19.8
1200/120
9.0
0.07
3423.00.60
MEGALAM MDA
15P6
1525x610x66
H14
24.9
1500/120
10.0
0.07
3423.01.00
MEGALAM MDA
9P7
915x762x66
H14
18.6
1125/120
7.5
0.06
3423.01.10
MEGALAM MDA
12P7
1220x762x66
H14
24.9
1500/120
10.0
0.07
3423.01.20
MEGALAM MDA
15P7
1525x762x66
H14
31.0
1875/120
12.5
0.09
3423.01.30
MEGALAM MDA
18P7
1830x762x66
H14
37.2
2250/120
12.5
0.12
3423.01.40
MEGALAM MDA
3P9
305x915x66
H14
7.4
450/120
3.0
0.03
3423.01.50
MEGALAM MDA
9P9
915x915x66
H14
22.3
1350/120
9.0
0.06
3423.01.60
MEGALAM MDA
12P9
1220x915x66
H14
30.0
1800/120
12.0
0.08
Class F5 to F9
H10 to U17
D
W
EN1822
Type: HEPA filtering panel with seal for mechanical clamping mounting systems.
EN 1822 efficiency: H10 / H14.
MPPS efficiency: H10: ≥ 85%, H14: ≥99.995%.
DOP efficiency: H10: ≥ 95%, H14: ≥ 99.999%.
occur.
Test: : 100% individually scanned to EN 1822.
Mounting system: Mechanical clamping structure, Terminal housings.
Other dimensions available on request
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
51
Megalam MD & MG - U15
Advantages
• Guaranteed performance
• Protection via 2 grids
• 100% individual scanning test
according to standard EN 1822
W
D
Filter classification Media
EN 1822
area m 2
Air flow /
pressure drop
m 3 /hr/Pa
Unit
weight
kg
Unit
volume
m3
Reference
Type
Model
Dimensions
(WxHxD) mm
3445.00.30
MEGALAM MGGS
6P6
610x610x110
U15
3418.00.10
MEGALAM MDGS
3P3
305x305x66
U15
2,8
150/140
1.0
0,01
3418.00.20
MEGALAM MDGS
3P6
305x610x66
U15
5,5
300/140
2.0
0,02
3418.00.30
MEGALAM MDGS
6P6
610x610x66
U15
11,2
600/140
4.0
0,03
3418.00.90
MEGALAM MDGS
7P6
762x610x66
U15
14
750/140
5.0
0,04
3418.00.40
MEGALAM MDGS
9P6
915x610x66
U15
16,9
900/140
6.0
0,05
3418.00.50
MEGALAM MDGS
12P6
1220x610x66
U15
22,5
1200/140
8.0
0,07
3418.00.60
MEGALAM MDGS
15P6
1525x610x66
U15
28,3
1500/140
10.0
0,07
3418.00.80
MEGALAM MDGS
3P7
305x762x66
U15
7
375/140
2.5
0,02
3418.01.00
MEGALAM MDGS
9P7
915x762x66
U15
21,1
1125/140
7.5
0,06
3418.01.10
MEGALAM MDGS
12P7
1220x762x66
U15
28,3
1500/140
10.0
0,07
3418.01.20
MEGALAM MDGS
15P7
1525x762x66
U15
35,3
1875/140
12.5
0,09
3418.01.40
MEGALAM MDGS
3P9
305x915x66
U15
8,3
450/140
3.0
0,03
3418.01.50
MEGALAM MDGS
9P9
915x915x66
U15
25,3
1350/140
9.0
0,06
3418.01.60
MEGALAM MDGS
12P9
1220x915x66
U15
33,9
1800/140
12.0
0,08
8.0
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
52
EN1822
Type: ULPA filtering panel with seal for mechanical clamping systems.
EN 1822 efficiency: U15.
occur.
Megalam (Laminator) MDL & MXL - U15 & U16
• Integrated laminator screen
• 100% individual scanning test
• ULPA U15 and U16
according to standard EN 1822
D
Unit weight
kg
Unit
volume
m3
16.9
900/150
6.0
0.05
16.9
900/150
6.0
0.05
U15
22.5
1200/150
8.0
0.07
U15
22.5
1200/150
8.0
0.07
915x610x66
U16
18.4
900/165
6.0
0.05
915x610x66
U16
18.4
900/165
6.0
0.05
12P6-01
1220x610x66
U16
24.5
1200/165
8.0
0.07
12P6-01
1220x610x66
U16
24.5
1200/165
8.0
0.07
MEGALAM MXLGS
6P6-01
610x610x90
U15
15.4
600/120
5.6
0.05
MEGALAM MXLGS
6P6-10
610x610x90
U15
15.4
600/120
5.6
0.05
Type
Model
Dimensions
(WxHxD) mm
3449.20.40
MEGALAM MDLGS
9P6-01
915x610x66
U15
3449.00.40
MEGALAM MDLGS
9P6-10
915x610x66
U15
3449.20.50
MEGALAM MDLGS
12P6-01
1220x610x66
3449.00.50
MEGALAM MDLGS
12P6-10
1220x610x66
3450.20.40 MEGALAM MDLSGS
9P6-01
9P6-10
3425.20.30
3425.00.30
Air flow/pressure
drop m³/h/Pa
Filter
Media
classification EN area
m²
1822
Reference
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
53
W
Class F5 to F9
EN1822
Application: Final filtration for clean rooms, clean devices and units with laminar flow.
Type: ULPA filtering panel with laminator and gasket for mechanical clamping systems.
Laminator: Screen bonded downstream for laminar diffusion.
Grid: Mild steel painted grille placed upstream.
EN 1822 efficiency: U15 / U16.
MPPS efficiency: U15: ≥99.9995%, U16: ≥99.99995%.
occur.
H10 to U17
• Laminarity better than +/- 20%
Advantages
Silent Hood Diffuser - H14
Advantages
• H14 compact filter-diffuser for
• Quiet: LW = 35 dB
clean room
• Ready to install
• Laminarity +/- 20%
Application: Final filtration for clean rooms.
Type: Ready to install HEPA/ULPA filter diffuser.
Frame: Extruded and anodised aluminium, galvanised steel cover.
Gasket: 10x5mm neoprene, self adhesive ready for installation.
Connection: Spigot with outer dia. 315mm or 250mm depending on the model.
Grid: Downstream in painted mild steel.
MPPS efficiency: ≥99.995%.
occur.
Test: 100% individually scanned in accordance with EN 1822.
Mounting system: Mechanical clamping structures.
Type
Dimensions (WxHxD) Filter classification media
mm
EN 1822
area m 2
Model
Air flow/nominal
pressure drop
m³/h/Pa
Unit volume
Unit
weight kg
m3
5970.00.21
Silent Hood MDSHA RF1
300x600x116/250
H14
4.2
300/140
10
0.03
5975.00.31
600x600x116/315
H14
9.2
600/140
13
0.06
5975.00.41
Silent Hood
MDSHA RF
905x600x116/335
H14
14
900/140
16
0.09
5975.00.51
1210x600x116/315
H14
19
1200/140
19
0.13
5975.00.20
305x610x116/250
H14
4.3
300/140
10
0.03
5975.00.30
610x610x116/315
H14
9.4
600/140
13
0.06
5975.00.40
Silent Hood
MDSHA RF
915x610x116/315
H14
14.6
900/140
16
0.09
5975.00.50
Silent Hood
MDSHA RF
1220x610x116/315
H14
19.5
1200/140
19
0.13
Other dimensions available on request. Available in other grades and with a laminator
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
54
Reference
Megalam U (Gel) - H14 & U15
Advantages
Reference
Type
Filter
classification
EN 1822
Dimensions
(WxHxD)mm
Media
area m²
Air flow/pressure
drop m³/h/Pa
Air flow /
Unit
pressure drop
max m³/h/Pa volume m³
Unit
weight
kg
3413.08.96
MEGALAM MDA U
H14
305x305x78
2.4
150/120
250/200
0.01
2.0
3413.08.89
MEGALAM MDA U
H14
305x610x78
4.8
300/120
300/200
0.02
4.0
3413.08.79
MEGALAM MDA U
H14
610x610x78
10.0
600/120
1000/200
0.03
6.0
3413.08.87
MEGALAM MDA U
H14
915x610x78
14.8
900/120
1500/200
0.05
8.0
3413.08.90
MEGALAM MDA U
H14
1220x610x78
19.8
1200/120
2000/200
0.06
11.0
3413.08.97
MEGALAM MDA U
H14
305x762x78
6.1
375/120
625/200
0.02
4.5
3413.08.98
MEGALAM MDA U
H14
915x762x78
18.6
1125/120
1875/200
0.05
9.0
3413.08.91
MEGALAM MDA U
H14
1220x762x78
24.9
1500/120
2500/200
0.07
13.0
3413.08.88
MEGALAM MDA U
H14
915x915x78
22.3
1350/120
2250/200
0.06
12.0
3413.08.95
MEGALAM MDA U
H14
1220x915x78
29.0
1800/120
3000/200
0.08
15.0
3413.08.82
MEGALAM MDGS U
U15
762x610x78
14.0
750/140
-
0.04
6.5
3413.08.81
MEGALAM MDGS U
U15
915x610x78
16.9
900/140
-
0.05
8.0
3413.18.02
MEGALAM MDGS U
U15
915x762x78
21.1
1125/140
-
0.05
9.0
3413.08.84
MEGALAM MDGS U
U15
1220x762x78
28.3
1500/140
-
0.07
13.0
3413.08.80
MEGALAM MDGS U
U15
915x915x78
25.3
1350/140
-
0.06
12.0
H10 to U17
D
Other dimensions available on request.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
55
W
Application: Final filtration for clean rooms and housings.
Type: HEPA/ULPA filter with gel seal.
Frame: Anodized aluminium.
Gasket: PU gel.
Grid: Mild steel white epoxy paint upstream and downstream.
EN 1822 efficiency: H14 and U15.
MPPS efficiency: H14 = 99.995%, U15 = 99.9995%.
EN1822
• Can be assembled without
clamping
• 100% individual control
Class F5 to F9
• Leaktightness by means of gel
Megalam T (Gel) - H14 & U15
Advantages
• Compact design
• 100% individually scann tested
in accordance with EN 1822
• Secure protection of the filter
media
W
D
Application: Gel seal filter for terminal housings and laminar flow environments.
Type: HEPA/ULPA filter with gel seal.
Frame: Extruded anodised aluminium.
Gasket: PU Gel.
EN 1822 efficiency: H14 and U15.
MPPS efficiency: H14 = 99.995%, U15 = 99.9995%.
occur.
Mounting systems: Ceiling mounted grid systems and terminal housings.
Reference
Type
Model
Dimensions
(WxHxD)
mm
EN 1822
Media
area
m2
Air flow/pressure
drop m 3 /h/Pa
Unit weight
kg
Unit volume m 3
3471.x0.10
MEGALAM
MDT14 U-305x305x71-2G
305x305x71
H14
2,4
150/120
1
0,01
3471.x0.20
MEGALAM
MDT14 U-305x610x71-2G
305x610x71
H14
4,8
300/120
2
0,02
3471.x0.30
MEGALAM
MDT14 U-610x610x71-2G
610x610x71
H14
10
600/120
4
0,03
3471.x0.90
MEGALAM
MDT14 U-762x610x71-2G
762X610X71
H14
12,3
750/120
5
0,04
3471.x0.40
MEGALAM
MDT14 U-915x610x71-2G
915x610x71
H14
14,8
900/120
6
0,05
3471.x0.50
MEGALAM
MDT14 U-1220x610x71-2G
1220x610x71
H14
19,8
1200/120
8
0,06
3471.x0.80
MEGALAM
MDT14 U-305x762x71-2G
305x762x71
H14
6
375/120
2,5
0,02
3471.x1.00
MEGALAM
MDT14 U-915x762x71-2G
915x762x71
H14
18,6
1125/120
7,5
0,06
3471.x1.10
MEGALAM
MDT14 U-1220x762x71-2G
1220x762x71
H14
24,9
1500/120
10
0,07
3471.x1.50
MEGALAM
MDT14 U-915x915x71-2G
915x915x71
H14
22,3
1350/120
9
0,06
3471.x1.60
MEGALAM
MDT14 U-1220x915x71-2G
1220x915x71
H14
30
1800/120
12
0,08
3472.x0.20
MEGALAM
MDT15 U-305x610x71-2G
305x610x71
U15
5,5
300/140
2
0,017
3472.x0.30
MEGALAM
MDT15 U-610x610x71-2G
610x610x71
U15
11,2
600/140
4
0,034
3472.x0.90
MEGALAM
MDT15 U-762x610x71-2G
762X610X71
U15
14
750/140
5
0,042
3472.x0.40
MEGALAM
MDT15 U-915x610x71-2G
915x610x71
U15
16,9
900/140
6
0,051
3472.x0.50
MEGALAM
MDT15 U-1220x610x71-2G
1220x610x71
U15
22,5
1200/140
8
0,068
3472.x0.80
MEGALAM
MDT15 U-305x762x71-2G
305x762x71
U15
7
375/140
2,5
0,021
3472.x1.00
MEGALAM
MDT15 U-915x762x71-2G
915x762x71
U15
21,1
1125/140
7,5
0,064
3472.x1.10
MEGALAM
MDT15 U-1220x762x71-2G
1220x762x71
U15
28,3
1500/140
10
0,069
3472.x1.50
MEGALAM
MDT15 U-915x915x71-2G
915x915x71
U15
25,3
1200/140
9
0,062
Please Note:
Seal Position "01" : x = 2
Seal Position "10" : x = 3
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
56
EN1822
• Laminar air flow distribution
Type
D
• No outgassing
Application: Very high efficiency final filter for clean environments and LAF benches.
Type: ULPA filter.
Frame: Extruded anodised aluminium.
Media: e PTFE (Teflon).
EN 1822 efficiency: U15
MPPS efficiency: > 99.9995%
occur.
Mounting system: Ceiling mounted grid systems, terminal housings and clean devices.
EN 1822
Dimensions
(WxHxD)mm
Media
area m²
Air flow/Preassure
drop m³/h/Pa
Unit
Unit
volume m³ weight kg
305x610x66
4,80
300/105
0,017
2,00
1645020Z
MD15/PTFE-305×610
U15
1645050B
MD15/PTFE-610×610
U15
610x610x66
9,70
605/100
0,034
4,00
1645150
MD15/PTFE-1220×610
U15
1220x610x66
19,50
1205/100
0,068
8,00
164550P1
MD15/PTFE-1220×915
U15
1220x915x66
29,20
1810/100
0,083
12,00
164902
MX15/PTFE-305×610
U15
305x610x90
6,60
300/85
0,023
2,80
164907
MX15/PTFE-610×610
U15
610x610x90
13,20
605/80
0,046
5,60
1649000
MX15/PTFE-1220×610
U15
1220x610x90
26,60
1205/80
0,092
11,20
16490000
MX15/PTFE-1220×915
U15
1220x915x90
40,10
1810/80
0,112
16,80
Reference
W
• Chemical resistance
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
57
EN1822
Class F5 to F9
Advantages
H10 to U17
Megalam MD & MX e-PTFE - U15
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
58
Notes
Page 62
Page 63
Carbon Cylinders
Camcarb Mounting Frames
Bonded and Loose Filled
Carbon Panels
Camsure
Compact Carbon Filter
CitySorb
Carbon Cylinders
Camcarb Green
Page 64
Page 65
Page 67
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
59
Page 66
CityCarb
®
Class F5 to F9
Compact 2 in 1 solution
H10 to U17
CityFlo
Summary Carbon and Chemical Filters
I n d o o r a i r q u a l i t y, E N 1 3 7 7 9
pollution does not pass us by. It takes numerous different forms, for
example vehicle exhaust gas, factory chimneys, the dust raised by car
traffic and cigarette smoke. It has been known for some time that
exposure to pollution has an impact on human beings. The common
symptoms are headaches, watering eyes and lower performance at
work. Such symptoms are traditionally referred to as Sick Building
Syndrome or similar terms.
The industrialised world
The industrialised world has changed immeasurably over the past 50
years. One very real difference is that the air that we breathe is more
heavily, and more diversely, polluted. Although there are natural sources
of pollution, the main concern is pollution caused by human activity.
Tens of thousands of synthetic chemicals (which do not exist in any
natural state) are now manufactured at an estimated rate of more than a
billion tons per year. These chemicals are released into the atmosphere
when they are produced, and when they are used they can travel great
distances. They inevitably form part of our lives. Our lifestyles (work and
leisure) mean that we spend more and more time inside buildings. The
fact that buildings have to be ventilated means that we are increasingly
exposed to particulate and gas pollution from the outdoor air.
The new European Standard for
Ventilation
The impact of pollution on our health
Air pollution can be categorised as either particulate (dust) or gas
(molecular). Particles enter the body and the respiratory system via
breathing. Gas or molecular pollution also penetrates the body via the
air we breathe, but from the lungs it enters the bloodstream and in turn
infiltrates the whole body. Though these chemicals may be invisible,
Recommendations in EN 13779 for air filters
IAQ
Indoor Air Quality
Outdoor air quality
IDA 1 (High)
IDA 2 (Medium)
IDA 3 (Moderate)
IDA 4 (Low)
ODA 1
F9
F8
F7
F6
ODA 2
F7 / F9
F6 / F8
F6 / F7
G4 / F6
ODA 3
F7 / F9
F8
F7
F6
ODA 4
F7 / F9
F6 / F8
F6 / F7
G4 / F6
ODA 5
F6 / GF / F9
F6 / GF / F9
F6 / F7
G4 / F6
Table refering to appendix "A3. Use of Air Filters" in The European Standard EN 13779.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
60
European Standard EN 13779 is aimed at achieving a comfortable,
healthy indoor environment in all seasons with acceptable installation
and running costs. EN 13779 has now been adopted as a national
standard in all countries. It specifies the required filter performance in a
system to achieve good IAQ taking into consideration contamination in
the outdoor air. Outdoor air is split into five categories, from ODA 1, in
which the air is pure apart from temporary pollution such as pollen, up
to ODA 5 with high concentrations of gas and particles. This elevated
pollution level ODA 5 is now typical of the contamination in urban areas.
Key:
4. A very high level of adsorption, in the order of 20 - 40% by weight of
dry carbon.
3. Good index with a capacity of 10 - 20%.
2. Mediocre index that may require a particularly long contact time,
requires case by case study.
1. Practically no adsorption, another solution must be sought.
3 Pentylene
4 Medicinal odours
3 Pentyne
4 Acetic anhydride
3 Chlorine
4 Ethylene dichloride
4 Menthol
4 Perchloroethylene
3 Acetone
4 Chlorobenzene
3 Ethylene oxide
4 Mercaptan
4 Perfumes, cosmetics
1 Acetylene
4 Chloroform
2 Ethyl mercaptan
1 Methane
4 Perspiration
3 Acids
4 Chloronitropropane
4 Ethyl silicate
3 Methyl acetate
4 Petrol
3 Acrolein
4 Chloropicrin
4 Eucalyptol
4 Methyl acrylate
4 Phenol
4 Acrylic acid
4 Chloroprene
4 Faecal odours
3 Methyl alcohol
3 Phosgene
4 Acrylonitrile
3 Cigarette smells
3 Farmyard smells
3 Methyl bromide
4 Plastics
4 Adhesives
4 Cleaning solvents
4 Fertiliser
4 Methyl butyl ketone
2 Propane
4 Alcohol
3 Cooking smells
3 Film developing
3 Methyl chloride
4 Propanol
4 Amines
4 Creosote
2 Fish odours
4 Methylcyclohexane
2 Propylene
2 Ammonia
4 Cresol
4 Floral odours
4 Methylcyclohexanol
4 Propyl mercaptan
2 Amyl acetate
4 Cyclohexane
2 Formaldehyde
4 Méthylcyclohexanone
4 Resins
4 Amyl alcohol
4 Cyclohexanol
3 Formic acid
4 Methylene chloride
4 Rubber
4 Amyl ether
4 Cyclohexanone
3 Freon
3 Methyl ether
2 Slaughterhouse
3 Anaesthetics
4 Cyclohexene
4 Gangrene smell
4 Methyl ethyl ketone
3 Soap
4 Aniline
4 Deodorants
4 Garlic
4 Methyl isobutyl ketone
3 Solvents
4 Animal carcases
4 Detergents
4 Heptane
4 Methyl mercaptan
4 Styrene monomer
3 Animal odours
4 Dibromoethane
4 Heptylene
4 Monochlorobenzene
2 Sulphur components
4 Antiseptics
4 Dichlorobenzene
3 Hexane
4 Naphtha (coal tar)
2 Sulphur dioxide
4 Asphalt fumes
4 Dichloroethane
3 Hexylene
4 Naphtha (oil)
4 Sulphuric acid
3 Bathroom smells
4 Dichloroethylene
3 Hospital odours
4 Naphthalene
3 Sulphur trioxide
4 Benzene
4 Diesel fumes
4 Household smells
4 Nicotine
4 Tar
3 Bleaching solutions
3 Diethylamine
1 Hydrogen
3 Nitric acid
4 Tetrachloroethane
2 Body odours
3 Diethyl ketone
2 Hydrogen bromide
4 Nitrobenzene
4 Tetrachloroethylene
4 Bromine
4 Dimethylaniline
2 Hydrogen chloride
4 Nitroethane
3 Tetrahydrofuran
4 Burnt flesh
4 Dimethylsulfate
2 Hydrogen cyanide
2 Nitrogen dioxide
4 Tobacco odours
3 Butadiene
4 Dioxane
2 Hydrogen fluoride
4 Nitroglycerine
4 Toilet smells
2 Butane
4 Dipropyl ketone
3 Hydrogen iodide
4 Nitromethane
4 Toluene
4 Butanone
4 Disinfectants
2 Hydrogen sulphide
4 Nitropropane
4 Trichlorethylene
4 Butyl acetate
4 Embalming products
4 Incense
4 Nitrotoluene
4 Urea
4 Butyl alcohol
4 Essential oils
3 Industrial waste
4 Nonane
4 Uric acid
4 Butyl chloride
1 Ethane
4 Iodine
4 Octane
4 Vehicle exhaust
2 Butylene
3 Ether
4 Iodoform
4 Onions
4 Vinegar
4 Butyric acid
4 Ethyl acetate
3 Isoprene
4 Ozone
3 Vinyl chloride
4 Camphor
4 Ethyl acrylate
4 Isopropyl acetate
4 Paint odours
3 Wood alcohol
4 Caprylic acid
4 Ethyl alcohol
4 Isopropyl alcohol
4 Paradichlorobenzene
4 Xylene
3 Carbon disulphide
3 Ethylamine
4 Kerosene
3 Pentane
1 Carbon dioxide
4 Ethylbenzene
4 Lactic acid
4 Pentanone
Class F5 to F9
4 Lubricants
1 Ethylene
H10 to U17
3 Ethyl bromide
4 Carbon tetrachloride
1 Carbon monoxide
4 Acetic acid
2 Acetaldehyde
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
61
Adsorption index of Activated Carbon for various types of odour
Adsorption index of activated carbon
CityFlo
TIFICAT
ER
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
• Double action: particle and
• Ideal for filtering most low
odour filtration
• Can be used to upgrade existing
installations
concentration interior and
exterior pollutants
• Compact “2 in 1” solution
Application: Particle and odour removal in Hospitals, Offices, Airports etc.
Type: Multi pocket particle and gas filter.
Media: Glass fibre and broad spectrum carbon.
EN 779:2002 efficiency: F7 (80-85%).
Humidity: 70% RH maximum.
Holding frames: Front and side access holding frames are available: Type 8, Type L and FC
Housings.
E
C
Advantages
D
Reference
Type
Dimensions
(WxHxD) mm
Filter
classification EN
779:2002
Number of
pockets
Carbon
mass kg
Air flow/pressure
drop m³/hr/Pa
604001
CITYFLO
592x592x534
F7
10
2
3400/140
6
1,2
B
604002
CITYFLO
287x592x534
F7
5
1
1700/145
3,5
0,6
B
604003
CITYFLO
490x592x537
F7
8
1.5
2550/140
4.6
0.9
B
Unit
Unit
Energy
rating
Two filters in one
Well known bag filter construction is now available with a particle and gas filtration layer. The frame components are made of galvanized sheet metal to
ensure a robust construction.
City-Flo is the ultimate solution when a high performance bag filter and a high performance odour removal filter are needed in the same encapsulated
space. The filter can be easily fitted into new or existing standard filter frames. High performance Camfil Farr glass fibre media is now combined with an
exclusive broad spectrum carbon media that utilises the benefits of RAD (Rapid Adsorption Dynamics) to remove a wide range of VOCs and odours.
High perfomance by using RAD
The RAD characteristics ensure effective collection of gases within a bag filter design. The carbon also provides high efficiency removal of ozone, a
major pollutant in city environments.
Service life
The filter can be replaced when pressure loss exceeds the maximum allowed value for the ventilation system or after a maximum of one year.
Maintenance
Following good practice for all filters, used City-Flo filters should be bagged immediately after removal from the unit and disposed of by the appropriate
route.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
62
Ultimate solution
concentration interior and
exterior pollutants
installations
• Double action: particle and
odour filtration
Application: High efficiency particle filtration for deodorisation and purification of gas
pollutants, used for filtration in offices, airports and industrial workshops.
Type: High efficiency, activated carbon, incinerable filter.
Frame: Polypropylene.
Media: Synthetic fibre.
EN 779:2002 efficiency: F7 with very fine grains of activated carbon.
Maximum flow rate: 4000m3/h.
Mounting system: "Camfil universal frame" frames in kit form, FC type housings.
Reference
Type
Model
Dimensions
(WxHxD)
mm
Filter
classification
EN 779:2002
Carbon
mass
Air flow pressure drop Unit
Type of for contact time = 0.1 weight
carbon
kg
s m 3 /h/Pa
Unit
Volume
m3
5716522
CITYCARB OPKCC-242412-85-0
592x592x290
F7
3
RAD
3400/120
7.5
0.11
5716532
592x490x290
F7
2.5
RAD
2800/120
6.1
0.09
5716542
592x287x290
F7
1.5
RAD
1700/120
3.8
0.05
Citycarb has been specifically designed to easily improve the quality of indoor air due to
its "2 in 1" concept:
1. Highly effective filtration: Classed as F7 according to EN 779:2002, it stops 85% of 1 micron particles and meets the recommendations of UNICLIMA
and EUROVENT 12/1-92.
2. Adsorption of odours and pollution: This specifically designed product can provide efficiencies as high as 99% for Sulphur Dioxide, the main pollutant
in urban environments.
Citycarb is easy to use
Citycarb is designed to fit in place of the existing pocket or compact filter within an air handling system. The existing frames can be used because the
filter fixings are the same and as you are not adding an extra filter stage, the pressure drop remains low.
Citycarb uses a special ingredient - RAD
The RAD or Rapid Adsorption Dynamic ensures the optimum efficiency of CityCarb. Rather than the amount of carbon (the traditional measure), it is the
capacity of this new form to rapidly trap gasses which ensures the advanced performance of CityCarb. The carbon is in the form of very small granules
into which gas molecules can rapidly diffuse.
Citycarb eliminates the harmful effects of urban pollution
CityCarb is specifically designed to handle common substances found in atmospheric contamination:
NOX is caused by traffic, power stations and industrial plants.
Sulphur Dioxide is mainly produced by power station emissions however traffic pollution greatly adds to the problem.
Ammonia is caused by agriculture and industrial processes.
Hydrochloric acid is a by product from incineration plants.
Volatile Organic Compounds (VOC’s) are casued by vehicle exhaust, solvents and aerosols.
Butadiene 1.3 is caused by vehicle emissions.
Some of these molecules are included in the calculation of the atmospheric pollution index.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
63
Class F5 to F9
D
• 100% incinerable
• Ideal for filtering most low
H10 to U17
W
• Compact “2 in 1” solution
Advantages
CityCarb ®
Compact Carbon Filter
CitySorb
Advantages
W
D
• High efficiency
• Large air flow capacity
Application: Adsorption of odours and gasses in air conditioning applications.
Type: Rigid pleated filter.
Case: Polystyrene.
Media: Multilayer carbon media.
Separators: Hot-melt.
Gasket: One piece PU gasket.
Recommended temperature range: 0-40°C.
Recommended relative humidity: < 70% RH.
Holding frames: Front and side access housings and frames are available, Type 8, Type L and
FC Housings.
Reference
Type
Model
Dimensions
(WxHxD)
mm
Media area m 2
5718522
CITYSORB
OPKCS-242412-01 PU
592x592x292
8.0
3400/80
10.8
0.02
5718532
CITYSORB
OPKCS-242012-01 PU
592x490x292
6.6
2800/80
9.2
0.04
5718542
CITYSORB
OPKCS-241212-01 PU
592x287x292
3.5
1500/80
5.4
0.02
Air flow / pressure drop Unit weight
kg
m 3 /hr/Pa
Unit Volume
m3
Citysorb is a high-efficiency compact molecular filter for addressing IAQ issues in public and commercial buildings. This filter satisfies
demands to tackle nuisance odours and provide occupants with the highest indoor air quality as specified in the European Standard EN
13779. The material selection and construction method ensures that Citysorb is a clean, light filter that is both quick and easy to
maintain.
efficiency %
Temperature 23º C
Humidity 50%
Concentration 80ppm
Airflow 3400 m3/h
Citysorb dP. 91 Pa
adsorbed toluene
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
64
Also available, Citysorb Acid, for more efficient treatment of specific acid molecules.
Advantages
• Completely incinerable
• Conical inlet
• Rapid bayonet fitting system
• Reduced weight
• Two integral moulded TPE
• High performance
gaskets
Application: Adsorption of odours, VOC’s and / or low toxicity gases for airports, museums,
kitchens, hospitals or clean room industry.
Type: Cylindrical activated carbon cartridge in ABS and HDPE.
Mounting System: Camcarb mounting frame, FC-CC housings.
Cylinders: ABS plastic.
Carbon: "Broad Spectrum" activated carbon, adsorption of odours, ozone and organic gases,
impregnated activated carbon, adsorption of non-organic gases.
Media: Coconut shell carbon CM05.
Reference
Type
Model
Dimensions
(WxHxD) mm
Carbon
thickness
mm
Carbon weight
kg
Carbon
type
* Airflow/
pressure
drop m 3 /h/Pa
Unit
weight
kg
Unit
volume
m3
571750
Camcarb Green
Cylinder 2600
147x93x450
26
2,3
CM 05
80/30
2,7
0,007
571760
Camcarb Green
Cylinder3500
147x93x600
26
3,1
CM 05
100/30
3,7
Air flow and air distribution of CAMCARB Green
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
65
* Based on a contact time of 0.2 sec. Alternative models are also available.
Class F5 to F9
Camcarb Green
H10 to U17
Carbon Cylinders
Carbon Cylinders
Camcarb Mounting Frames
Advantages
• Modular design adaptable for
• Rapid fitting system via
all types of installations
• Reduced weight
• Quick and easy service
bayonet fitting
Application: Assembly of Camcarb activated carbon cylinders.
Type: Quick bayonet-mounted support frame for Camcarb cylinders.
Design: Galvanised steel or stainless steel.
For filters: Camcarb activated carbon cylinders.
Mounting: Bayonet locking.
W
Dimensions
(WxHxD)
mm
Cylinder capacity
Unit weight kg
Unit volume
m3
Frame G8
305x610x70
8
3.0
0.02
Camcarb
Frame G16
610x610x70
16
4.8
0.04
Camcarb
Frame G8 SS
305x610x70
8
4.0
0.02
Camcarb
Frame G16 SS
610x610x70
16
5.0
0.04
Reference
Type
1618.60.00
Camcarb
1618.62.00
1618.57.00
1618.59.00
Model
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
66
D
Camsure
Advantages
W
D
• Range of standard and non
• Clean, dust free construction
standard sizes
• High performance
• Suitable for a wide range of air
volumes
Application: Adsorption of odours and gases in air conditioning applications.
Type: Bonded and granular carbon panels.
Media: Wide spectrum carbon.
Mounting systems: Front and side access housings and frames are available.
Reference
Type
Nominal size (WxHxD)
mm
Air flow / pressure drop m 3 /h/Pa
Unit weight kg
Unit volume m 3
CPB60060030NOM
Bonded Carbon Panel
600x600x30
324/160
6.0
0.012
CPB60030030NOM
Bonded Carbon Panel
600x300x30
160/160
3.0
0.006
CPG60060030NOM
Granular Carbon Panel
600x600x30
324/127
6.0
0.012
CPG60030030NOM
Granular Carbon Panel
600x300x30
160/127
3.0
0.006
Class F5 to F9
Bonded and Loose Filled Carbon Panels
H10 to U17
Air volume required to give a contact time of 0.1 second.
Above are sample sizes, filters are available in a comprehensive range of sizes, please specify.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
67
Also available with stainless steel case.
Filter Holding Frames
Absolute Filter Holding Frame Type 8 - Filter Holding Frame
Filter Housing
FCB-P
Filter Housing
FCBS-HF
Page 70
Page 71
Page 72
Page 73
Filter Housing
FCBS-A
Filter Housing
FCBL-CC
Filter Housing
FCBL-CS
Filter Housing
FCBL-HF
Page 74
Page 75
Page 76
Page 77
Terminal Filter Housings
Pharmaseal
Filter Containment
Systems
Camsafe
Filters for High
Temperature
Termikfil 2000
Filters for High
Temperature
Page 79
Page 80
Page 81
Page 78
Absolute® 1FRK
Filters for Painting Booths Filters for Painting Booths Filters for Painting Booths Filters for Painting Booths
Paint Extract Filters
Panolair SSI - Micretain H10
CDM Media
Airopac® HT-HF
Page 82
Page 83
Page 84
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
68
Page 85
Summary Housings, frames & special applications
Page 86
Filters for Gas Turbines
Campulse EF
Hi-Flo T
Dust Collector
Gold Series
Page 87
Page 88
Page 89
®
Cam GT
®
Class F5 to F9
Dust Collector
HemiPleat Cartridges
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
69
H10 to U17
Page 90
Absolute Filter Holding Frame
Advantages
• Pre drilled for easy assembly
• Location dimples in frame
ensure correct filter fitting
• Filter holding clips can be
easily replaced as required
Application: Mounting very high efficiency filters in air conditioning units and systems.
Type: Front access filter holding frame.
Construction: Galvanised steel or stainless steel.
Filter Types: Absolute and Micretain very high efficiency filters.
Filter fixing: Using 4 corner mounted clamps.
W
D
Reference
Type
Exterior dimensions
(WxHxD) mm
Filter dimension (WxHxD) mm
Unit weight kg
Unit volume m 3
5107.06.01
Galvanised steel
626x626x335
610x610x292
12.5
0.13
5107.24.01
Galvanised steel
626x321x335
610x305x292
10.0
0.07
5107.60.01
Galvanised steel
610x610x335
595x595x292
12.3
0.12
5107.50.01
Galvanised steel
610x305x335
595x290x292
9.9
0.06
5107.06.02
Stainless steel
626x626x335
610x610x292
12.5
0.13
5107.24.02
Stainless steel
626x321x335
610x305x292
10.0
0.07
5107.60.02
Stainless steel
610x610x335
595x595x292
12.3
0.12
5107.50.02
Stainless steel
610x305x335
595x290x292
9.9
0.06
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
70
Other dimensions and arrangements available on request.
Type 8 - Filter Holding Frame
Advantages
• Robust rigid construction
• Pre drilled for easy assembly
• Location dimples in frame
• Filter holding clips can be
ensure correct filter fitting
easily replaced as required
Type
Model
Exterior dimensions (WxH) mm
Unit weight kg
Unit volume m 3
079473-801
Type 8
610x610
610x610x68
2,4
0,04
079473-007
Type 8
508x610
508x610x68
2,2
0,03
079473-002
Type 8
508x508
508x508x68
2,0
0,03
079473-004
Type 8
305x610
305x610x68
1,8
0,02
H10 to U17
Reference
Class F5 to F9
Application: Mounting air filters in air conditioning systems.
Type: Front access filter holding frame.
Construction: Galvanised steel.
Gasket: Expanded neoprene.
Filter Types: S-Flo W, Hi-Flo, Hi-Cap Bag Filters, 1", 2" and 4" Panel Filters, Opakfil, Airopac,
Rigaflo and Ecopleat.
Filter fixing: Using 4 corner mounted clips, to suit the installed filter.
Note: Remember to order the frame and the appropriate clips.
Other materials available on request other dimensions and arrangements available on request.
Type
Model
050025-000
C-70 clip for 1" and 2" deep (25 & 50 mm)
C-70
074437-000
C-86 clip for 3" deep (75 mm)
C-86
059615-001
C-77 clip for 4" deep (100 mm)
C-77
059920-006
C-78-5 clip for 5" deep (125 mm)
C-78
Reference
Order 4 clips per frame, other materials available on request, clips to suit alternative or combination filters, available on request.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
71
Fixing Clips
Filter Housing
FCB-P
Advantages
• Easy to Install
• Gasket to seal between door
and filter housing
• Modular construction
• Easy servicing
• No tools needed to change
filters
• Stable and secure design
Housing: Galvanised steel.
Filter: Panel filters 25mm (1"), 50mm (2") and 95mm (4") deep.
Alternative: Possibility to switch the housings 180° (flexibility to acces from left or right side).
Please note: Stainless steel version is also available.
D
Reference
Type
Model
Exterior dimensions
(WxHxD) mm
Interior dimensions
(WxH) mm
Number of filters
592x592 mm
Number of filters
287x592 mm
Unit volume
m3
Unit weight kg
604001020
FCB-P 0510
05 10
399×744×202
309×614
-
1
0.06
7.3
604001040
FCB-P 1005
10 05
704×439×202
614×309
-
1
0.07
7.3
604001050
FCB-P 1010
10 10
704×744×202
614×614
1
-
0.12
9.5
604001060
FCB-P 1015
10 15
704×1055×202
614×925
1
1
0.17
15
604001070
FCB-P 1020
10 20
704×1360×202
614×1230
2
-
0.21
17
604001080
FCB-P 1025
10 25
704×1670×202
614×1540
2
1
0.26
21.5
604001090
FCB-P 1030
10 30
704×1975×202
614×1845
3
-
0.31
25
604001100
FCB-P 1510
15 10
1013×744×202
923×614
1
1
0.18
13.5
604001110
FCB-P 1520
15 20
1013×1360×202
923×1230
2
2
0.31
23
604001120
FCB-P 1530
15 30
1013×1975×202
923×1845
3
3
0.44
32.5
604001130
FCB-P 2010
20 10
1318×744×202
1228×614
2
-
0.22
15
604001140
FCB-P 2015
20 15
1318×1055×202
1228×925
2
2
0.31
25
604001150
FCB-P 2020
20 20
1318×1360×202
1228×1228
4
-
0.4
26.5
604001160
FCB-P 2025
20 25
1318×1670×202
1228×1540
4
2
0.49
35
604001170
FCB-P 2030
20 30
1318×1975×202
1228×1845
6
-
0.58
37
604001180
FCB-P 2510
25 10
1677×744×500
1537×614
2
604001190
FCB-P 2520
25 20
1677×1360×500
1537×1230
4
604001200
FCB-P 2530
25 30
1677×1975×500
1537×1845
6
604001210
FCB-P 3010
30 10
1982×744×500
1842×614
604001220
FCB-P 3015
30 15
1982×1055×500
1842×925
604001230
FCB-P 3020
30 20
1982×1360×500
604001240
FCB-P 3025
30 25
604001250
FCB-P 3030
3030
0.28
19
2
0.51
32.5
3
0.74
46
3
-
0.33
21.5
3
3
0.46
32.5
1842×1230
6
-
0.6
36
1982×1670×500
1842×1540
6
3
0.73
47.5
1982×1975×500
1842×1842
9
-
0.87
50.5
Other dimensions and arrangements available on request
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
72
W
Filter Housing
FCBS-HF
Advantages
and filter housing
• Easy servicing
filters
Model
Exterior dimensions
(WxHxD) mm
613002020
FCBS-HF 0510
05 10
399×744×500
309×614
_
1
0.15
18
613002040
FCBS-HF 1005
10 05
704×439×500
614×309
-
1
0.16
18
613002050
FCBS-HF 1010
10 10
704×744×500
614×614
1
-
0.27
24
613002060
FCBS-HF 1015
10 15
704×1055×500
614×925
1
1
0.38
38
613002070
FCBS-HF 1020
10 20
704×1360×500
614×1230
2
-
0.49
42
613002080
FCBS-HF 1025
10 25
704×1670×500
614×1540
2
1
0.6
54
613002090
FCBS-HF 1030
10 30
704×1975×500
614×1845
3
-
0.71
62
613002100
FCBS-HF 1510
15 10
1013×744×500
923×614
1
1
0.39
33
613002110
FCBS-HF 1520
15 20
1013×1360×500
923×1230
2
2
0.7
57
613002120
FCBS-HF 1530
15 30
1013×1975×500
923×1845
3
3
1.03
80
613002130
FCBS-HF 2010
2010
1318×744×500
1228×614
2
-
0.5
38
613002140
FCBS-HF 2015
20 15
1318×1055×500
1228×925
2
2
0.71
62
613002150
FCBS-HF 2020
20 20
1318×1360×500
1228×1228
4
-
0.92
65
613002160
FCBS-HF 2025
20 25
1318×1670×500
1228×1540
4
2
1.13
86
613002170
FCBS-HF 2030
20 30
1318×1975×500
1228×1845
6
-
1.33
92
613002180
FCBS-HF 2510
25 10
1677×744×500
1537×614
2
0.64
47
613002190
FCBS-HF 2520
25 20
1677×1360×500
1537×1230
4
2
1.17
81
613002200
FCBS-HF 2530
25 30
1677×1975×500
1537×1845
6
3
1.7
114
613002210
FCBS-HF 3010
30 10
1982×744×500
1842×614
3
-
0.76
54
613002220
FCBS-HF 3015
30 15
1982×1055×500
1842×925
3
3
1.07
81
613002230
FCBS-HF 3020
30 20
1982×1360×500
1842×1230
6
-
1.38
89
613002240
FCBS-HF 3025
30 25
1982×1670×500
1842×1540
6
3
1.7
118
613002250
FCBS-HF 3030
30 30
1982×1975×500
1842×1842
9
-
2
126
Type
Number of
Number of
Interior dimensions filters
Unit
Unit
592x592
filters
287x592 volume
(WxH) mm
m³ weight kg
mm
mm
Reference
H10 to U17
D
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
73
W
Class F5 to F9
Filters: S-FLO-W, HI-CAP, Hi-FLO and OPAKFIL G.
Alternative: Possibility to switch the housings 180º (flexibility to access from left or right side).
• Easy to Install
Filter Housing
FCBS-A
Advantages
• Easy to Install
and filter housing
• Easy servicing
filters
Filters: Absolute, AIROPAC, MICRETAIN and SOFILAIR.
D
Reference
Type
Model
Exterior dimensions
(WxHxD) mm
Interior
dimensions WxH
mm
Number of
filters 592x592
mm
Number
of filters
287x592 mm
Unit
volume m³
Unit
weight kg
605003520
FCBS-A 0510
05 10
399×744×500
309×614
-
1
0.15
20
605003540
FCBS-A 1005
10 05
704×439×500
614×309
-
1
0.16
20
605003550
FCBS-A 1010
10 10
704×744×500
614×614
1
-
0.27
26
605003560
FCBS-A 1015
10 15
704×1055×500
614×925
1
1
0.38
41
605003570
FCBS-A 1020
10 20
704×1360×500
614×1230
2
-
0.49
46
605003580
FCBS-A 1025
10 25
704×1670×500
614×1540
2
0,6
59
605003590
FCBS-A 1030
10 30
704×1975×500
614×1845
3
-
0.71
68
605003600
FCBS-A 1510
15 10
1013×744×500
923×614
1
0.39
37
605003610
FCBS-A 1520
15 20
1013×1360×500
923×1230
2
2
0,7
62
605003620
FCBS-A 1530
15 30
1013×1975×500
923×1845
3
3
1.03
88
605003630
FCBS-A 2010
20 10
1318×744×500
1228×614
2
-
0,5
42
605003640
FCBS-A 2015
20 15
1318×1055×500
1228×925
2
2
0.71
68
605003650
FCBS-A 2020
20 20
1318×1360×500
1228×1228
4
-
0.92
72
605003660
FCBS-A 2025
20 25
1318×1670×500
1228×1540
4
2
1.13
95
605003670
FCBS-A 2030
20 30
1318×1975×500
1228×1845
6
-
1.33
101
605003680
FCBS-A 2510
25 10
1677×744×500
1537×614
2
1
0.64
51
605003690
FCBS-A 2520
25 20
1677×1360×500
1537×1230
4
2
1.17
89
605003700
FCBS-A 2530
25 30
1677×1975×500
1537×1845
6
3
1.7
126
605003710
FCBS-A 3010
30 10
1982×744×500
1842×614
3
-
0.76
59
605003720
FCBS-A 3015
30 15
1982×1055×500
1842×925
3
3
1.07
89
605003730
FCBS-A 3020
30 20
1982×1360×500
1842×1230
6
-
1.38
98
605003740
FCBS-A 3025
30 25
1982×1670×500
1842×1540
6
3
1.7
130
605003750
FCBS-A 3030
30 30
1982×1975×500
1842×1842
9
-
2
138
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
74
W
FCBL-CC
Advantages
• Easy to Install
• Easy servicing
filters
and filter housing
Filters: Carbon cylinders 1000, 2000 or 2600.
Carbon CM05: For odours and VOC’s.
Carbon CM07: For gases as H2S, SO2, NH3.
Please note: Stainless steel version is also available
Unit
volume
m³
Unit weight
kg
309×610
8
0.23
25.5
614×309
8
0.24
25.5
704×744×750
614×614
16
0.4
33
704×1055×750
614×925
24
0.57
49.5
704×1360×750
614×1230
32
0.73
58.5
704×1670×750
614×1540
40
0.9
75
10 30
704×1975×750
614×1845
48
1.06
82.5
15 10
1013×744×750
923×614
24
0.58
45
Model
607002020
FCBL-CC 0510
05 10
399×744×750
607002040
FCBL-CC 1005
10 05
704×439×750
607002050
FCBL-CC 1010
10 10
607002060
FCBL-CC 1015
10 15
607002070
FCBL-CC 1020
10 20
607002080
FCBL-CC 1025
10 25
607002090
FCBL-CC 1030
607002100
FCBL-CC 1510
607002110
FCBL-CC 1520
15 20
1013×1360×750
923×1230
48
1.05
75
607002120
FCBL-CC 1530
15 30
1013×1975×750
923×1845
72
1.53
110
607002130
FCBL-CC 2010
20 10
1318×744×750
1228×614
32
0.75
53
607002140
FCBL-CC 2015
20 15
1318×1055×750
1228×925
48
1.06
80.5
607002150
FCBL-CC 2020
20 20
1318×1360×750
1228×1228
64
1.37
91.5
607002160
FCBL-CC 2025
20 25
1318×1670×750
1228×1540
80
1.68
118
607002170
FCBL-CC 2030
20 30
1318×1975×750
1228×1845
96
1.99
128.5
607002180
FCBL-CC 2510
25 10
1677×744×750
1537×614
40
0.95
65
607002190
FCBL-CC 2520
25 20
1677×1360×750
1537×1230
80
1.74
111
607002200
FCBL-CC 2530
25 30
1677×1975×750
1537×1845
120
2.53
157.5
607002210
FCBL-CC 3010
30 10
1982×744×750
1842×614
48
1.13
72.5
607002220
FCBL-CC 3015
30 15
1982×1055×750
1842×925
72
1.6
111
607002230
FCBL-CC 3020
30 20
1982×1360×750
1842×1230
96
2.06
124.5
607002240
FCBL-CC 3025
30 25
1982×1670×750
1842×1540
120
2.53
161.5
607002250
FCBL-CC 3030
30 30
1982×1975×750
1842×1842
144
2.99
175
Type
Number of
cylinders
Exterior dimensions (WxHxD) Interior dimension (WxH)
mm
mm
Reference
H10 to U17
D
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
75
W
Class F5 to F9
Filter Housing
Filter Housing
FCBL-CS
Advantages
• Easy to Install
filters
and filter housing
• Easy servicing
Filter: Bonded and Granular Carbon Panels.
Standard Carbon: For odours and VOC’s.
Impregnated Carbon: For gases as H2S, SO2, NH3.
Alternative: Possibility to switch the housings to 180º (flexibility to access from left or right
side).
D
Exterior dimensions (WxHxD) Interior dimensions (WxH) Number of Carbon Unit volume Unit weight
mm
mm
panels
kg
m3
Reference
Type
Model
611002040
FCBL-CS 1005
10 05
704x439x750
614x309
3
0.24
25.0
611002050
FCBL-CS 1010
10 10
704x744x750
614x614
6
0.40
32.5
611002060
FCBL-CS 1015
10 15
704x1055x750
614x925
9
0.57
51.5
611002070
FCBL-CS 1020
10 20
704x1360x750
614x1230
12
0.73
57.5
611002080
FCBL-CS 1025
10 25
704x1670x750
614x1540
15
0.90
73.5
611002090
FCBL-CS 1030
10 30
704x1975x750
614x1845
18
1.06
85.0
611002130
FCBL-CS 2010
20 10
1318x744x750
1228x614
12
0.75
51.5
611002140
FCBL-CS 2015
20 15
1318x1055x750
1228x925
18
1.06
84.0
611002150
FCBL-CS 2020
20 20
1318x1360x750
1228x1228
24
1.37
89.0
611002160
FCBL-CS 2025
20 25
1318x1670x750
1228x1540
30
1.68
117.5
611002170
FCBL-CS 2030
20 30
1318x1975x750
1228x1845
36
1.99
126.0
611002210
FCBL-CS 3010
30 10
1982x744x750
1842x614
18
1.13
73.5
611002220
FCBL-CS 3015
30 15
1982x1055x750
1842x925
21
1.60
111.0
611002230
FCBL-CS 3020
30 20
1982x1360x750
1842x1230
36
2.06
121.5
611002240
FCBL-CS 3025
30 25
1982x1670x750
1842x1540
45
2.53
162.0
611002250
FCBL-CS 3030
30 30
1982x1975x750
1842x1845
54
2.99
172.0
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
76
W
Filter Housing
FCBL-HF
Advantages
and filter housing
• Easy servicing
filters
D
Model
Exterior dimensions
(WxHxD) mm
613003020
FCBL-HF 0510
05 10
399x744x750
309x614
-
1
25
0.23
613003040
FCBL-HF 1005
10 05
704x439x750
614x309
-
1
25
0.24
613003050
FCBL-HF 1010
10 10
704x744x750
614x614
1
-
32.5
0.4
613003060
FCBL-HF 1015
10 15
704x1055x750
614x925
1
1
51.5
0.57
613003070
FCBL-HF 1020
10 20
704x1360x750
614x1230
2
-
57.5
0.73
613003080
FCBL-HF 1025
10 25
704x1670x750
614x1540
2
1
73.5
0.9
613003090
FCBL-HF 1030
10 30
704x1975x750
614x1845
3
-
85
1.06
613003100
FCBL-HF 1510
15 10
1013x744x750
923x614
1
1
45
0.58
613003110
FCBL-HF 1520
15 20
1013x1360x750
923x1230
2
2
77.5
1.05
613003120
FCBL-HF 1530
15 30
1013x1975x750
923x1845
3
3
110
1.53
613003130
FCBL-HF 2010
20 10
1318x744x750
1228x614
2
-
51.5
0.75
613003140
FCBL-HF 2015
20 15
1318x1055x750
1228x925
2
2
84
1.06
613003150
FCBL-HF 2020
20 20
1318x1360x750
1228x1228
4
-
89
1.37
613003160
FCBL-HF 2025
20 25
1318x1670x750
1228x1540
4
2
117.5
1.68
613003170
FCBL-HF 2030
20 30
1318x1975x750
1228x1845
6
-
126
1.99
613003180
FCBL-HF 2510
25 10
1677x744x750
1537x614
2
1
64
0.95
613003190
FCBL-HF 2520
25 20
1677x1360x750
1537x1230
4
2
110
1.74
613003200
FCBL-HF 2530
25 30
1677x1975x750
1537x1845
6
3
156
2.53
613003210
FCBL-HF 3010
30 10
1982x744x750
1842x614
3
-
73.5
1.13
613003220
FCBL-HF 3015
30 15
1982x1055x750
1842x925
3
3
111
1.6
613003230
FCBL-HF 3020
30 20
1982x1360x750
1842x1230
6
-
121.5
2.06
613003240
FCBL-HF 3025
30 25
1982x1670x750
1842x1540
6
3
162
2.53
613003250
FCBL-HF 3030
30 30
1982x1975x750
1842x1842
9
-
172
2.99
Type
Interior
Unit
of filter Number of filter
Unit
dimensions (WxH) Number
592x592
mm
287x592
mm
weight
kg
volume
m3
mm
Reference
Other dimensions and arrangements available on request.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
77
W
H10 to U17
Class F5 to F9
Housing: Galvinised steel.
Filter: S-FLO-W, HI-FLO and HI-CAP.
Alternative: Possibility to switch the housings 180° (flexibility to access from left or right side).
• Easy to Install
Te r m i n a l F i l t e r H o u s i n g s
Pharmaseal
Advantages
W
D
• Combines all the essential
• Fully welded seams
functions required for
pharmaceutical and
biotechnology facilities
• Quick filter change
• Controls and connections
accessible from room side
• Capability to isolate the room
during filter change
Application: Turbulent airflow clean rooms in pharmaceutical and bio-pharma.
Type: Terminal filter ducted ceiling exhaust housing for HEPA/ULPA filters in clean rooms, gel
seal, with individual bubble tight damper.
Construction: 1.6mm aluminium, continuously welded.
Duct connection: Round, fully welded ribbed inlet on top 305 diameter.
Damper: Individual adjustable bubble tight damper for airflow adjustment and hood bubble tight
isolation.
Included functions: Static pressure port.
Damper control with damper position indicator.
Overall efficiency test: downstream sample port.
Ports: Chrome-plates brass quick disconnect.
For filters: MEGALAM HFU H14 or U15 gel seal MD, MX and MG depth.
Filter seal: Immediate airtight seal by knife edge technology and gel seal filters.
Filter mounting: Quick filter change by pre-positioned rotating clamps.
Controls: Individual MPPS scanning, EN 1822 individual test report in the box.
Fastening: Suspended or fixed by 4 hanging pads.
Grille: Stainless steel 304 flush perforated hinged grille, 40% open with 38mm removable trim.
Supply Unit
With simplified control set: static pressure port, damper control, no aerosol dispersion port
Reference
Type
Model
Dimensions (WxHxD)
mm
5502.03.12
Pharmaseal 6P6
PH-25D25D-12D-D-F-12-R-TS-A-C-2-D-2-A-2
641x641x311/305
13
0,17
5502.05.12
Pharmaseal 12P6
PH-25D49D-12D-D-F-12-R-TS-A-C-2-D-2-A-2
641x1251x311/305
25
0,34
Exhaust Unit
With complete control set: static pressure port, damper control, overall efficiency port
Reference
Type
Model
Dimensions (WxHxD)
mm
5502.03.50
Pharmaseal 6P6
PH-25D25D-12D-D-F-12-R-TS-A-C-0-C-2-A-2
641x641x311/305
13
0,17
5502.05.50
Pharmaseal 12P6
PH-25D49D-12D-D-F-12-R-TS-A-C-0-C-2-A-2
641x1251x311/305
25
0,34
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
78
Unit weight kg Unit volume m 3
Unit weight kg Unit volume m 3
W
D
• Contact free filter change
• Sealed, welded, solid design
• Automatic tension regulating
• Tightness class B as per EN
filter clamping device
• Fast secure filter installation,
lever operated
• Optional filter seal seating test
as per DIN 1946, Part 4
1866 at 5000 Pa
• Ready flanged
• CamSafe connecting pieces can
be supplied in various designs
Application: CamSafe chambers are used when filtering radioactive, toxic or bacterial particles
and gasses and provide maximum safety for the operator. Areas of use include laboratories,
isolation wards and the pharmaceutical industry. The casings can be joined together so that
Dimensions prefilter
(WxHxD) mm
Dimensions second filter
(WxHxD) mm
730x535x725 (+ 90*)
-
610x610x292
50
0,35
730x790x725 (+ 90*)
610x610x47
610x610x292
80
0,55
Camsafe P2/1000, painted
730x1020x725 (+ 90*)
610x610x292
610x610x292
90
0,7
5180101
Camsafe 1000 1.4301
730x535x725 (+ 90*)
-
610x610x292
50
0,35
5180141
Camsafe P1/1000 1.4301
730x790x725 (+ 90*)
610x610x47
610x610x292
80
0,35
5180181
Camsafe P2/1000 1.4301
730x1020x725 (+ 90*)
610x610x292
610x610x292
90
0,7
Reference
Type
Dimensions (WxHxD*) mm
518010
Camsafe 1000, painted
518014
Camsafe P1/1000, painted
518018
Unit weight kg Unit volume m3
* incl. male thread hand knobs + 90mm. Allow access of approximately 1m to change the filter.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
79
multi-stage filter systems with a volume flow of up to 24,000 m3/h can be achieved.
Epoxy coated casing: Epoxy resin coating in RAL 9010 which is capable of being
decontaminated, clamping device made from high grade steel 1.4301.
Steel casing: Manufactured in high grade steel 1.4301.
Standard design: Material thickness 2mm, flange drilled ready for operation, service cover
with male thread hand knobs, changing bag, support shelf for contact free filter changing,
automative tension regulating filter clamping device.
Options: Filter seal seating test device in accordance with DIN 1946 Part 4, pressure
compensation device and pressure check points.
Filter cartridges:
Prefilter P1: 610x610x47mm .
Prefilter P2: 610x610x292mm.
Main filter: 610x610x292mm.
All main filters come equipped with straps to aid the handling, enabling them to be changed
easily.
The filters can be supplied with a variety of gaskets to suit the application.
The casing is suitable for different classes of filter, suitable for dealing with glasses or particle
contamination.
Accessories: Safe change bags, manometers and material for the flanged joints supplied on
request.
Class F5 to F9
Advantages
H10 to U17
Camsafe
Filter Containment Systems
F i l t e r s f o r H i g h Te m p e r a t u r e
Termikfil 2000
Advantages
W
D
• Meets FDA requirements -
• Exclusive precuring process
continuous 350°C, 99,99% at
0,3 μm
• Efficiency tested after
precuring
at 300°C carried out in the
plant
• Ceramic frame
Application: Protection of ultra-clean processes at high temperature, sterilisation tunnels in the
pharmaceutical industry.
Type: Very high efficiency panel resistant to 350°C in continuous service.
Frame: Composite ceramic.
Gasket: Rolled glass fibre paper + 6mm dia glass braid.
Media: Glass fibre.
Separator: Glass strands.
Sealant: Ceramic.
Grid: Upstream and downstream in stainless steel.
DOP efficiency: ≥ 99.99%.
Type
Model
Dimensions
(WxHxD)
mm
EN 1822
Media
area m 2
Air flow/pressure
drop m 3 /h/Pa
Unit
weight
kg
Unit
volume m 3
3415.07.00
TERMIKFIL
4P4
457x457x84
99.9
5.0
675/250
3
0.04
3415.06.00
TERMIKFIL
3P3
305x305x84
99.9
2.9
300/250
2
0.01
3415.01.00
TERMIKFIL
3P6
305x610x84
99.9
5.9
600/250
4
0.02
3415.02.00
TERMIKFIL
6P6
610x610x84
99.9
12.1
1200/250
5
0.04
3415.05.00
TERMIKFIL
4P6
457x610x84
99.9
8.9
900/250
4
0.03
3415.03.00
TERMIKFIL
7P6
762x610x84
99.9
15.3
1500/250
6
0.05
3415.04.00
TERMIKFIL
9P6
915x610x84
99.9
18.5
1800/250
8
0.06
References
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
80
Authorised local penetration: 10 -4 maximum, (0.01% conforming to FDA).
Temperature: Up to 350°C in continous service.
Test: 100% after thermal treatment at 300°C.
Mounting: A stainless steel compensating frame can be supplied to reach the thickness of
150mm or 292mm.
NB: To reduce fume emission when starting up, TERMIKFIL undergoes a specific precuring
cycle in the factory at 300°C using an exclusive CAMFIL FARR process.
Absolute ® 1FRK
Advantages
• 99.97% DOP
• High temperature resistant (up
to 350°C)
Application: Protection of ultra-clean processes at high temperatures.
Frame: Stainless steel.
Gasket: Glass fibre.
Separator: Aluminium.
Sealant: Ceramic, glass fibre.
DOP efficiency: 99.97% .
Temperature: 350°C in continuous service (400°C peak).
W
D
Type
Model
Dimensions
(WxHxD)
mm
Filter
classification
EN 779:2002
Media
area m 2
213612F2
Absolute 1 FRK
1FRK-220-10
305x610x150
99.97
5.1
580/250
6
0.04
213024F1
Absolute 1 FRK
1FRK-300-10
457x457x150
99.97
6.8
1125/250
8
0.05
213014F2
Absolute 1 FRK
1FRK-150-10
457x610x150
99.97
8.0
900/250
10
0.07
213017F2
Absolute 1 FRK
1FRK-600-10
610x610x150
99.97
11.0
1245/250
12
0.07
213019F2
Absolute 1 FRK
1FRK-980-01
914x610x150
99.97
16.8
1925/250
16
0.11
213003F2
Absolute 1 FRK
1FRK-450-01
305x610x150
99.97
10.4
950/250
9
0.06
213021F2
Absolute 1 FRK
1FRK-725-01
610x457x292
99.97
16.4
1500/250
13
0.08
213010F1
Absolute 1 FRK
1FRK-1250-01
762x610x292
99.97
28.4
2625/250
21
0.17
213008F2
Absolute 1 FRK
1FRK-1000-01
610x610x292
99.97
22.5
2050/250
17
0.12
Air flow/nominal
Unit weight
kg
pressure drop m 3 /h/Pa
H10 to U17
Unit
volume
m3
Reference
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
81
Model 01 = seal on air inlet side - Model 02 = seal on air outlet side - Other dimensions available on request
Class F5 to F9
F i l t e r s f o r H i g h Te m p e r a t u r e
Filters for Painting Booths
Paint Extract Filters
Advantages
• Long lasting solution
• Effective for a variety of
contaminants
• Collapsible for transportation
TIFICAT
ER
E
C
Application: Collection of overspray particles, paint booth exhaust
Type: Concertina pleated cardboard filter
Case: Cardboard
Media: Cardboard or two stage cardboard and synthetic media
Efficiency: See table
Recommended final pressure drop: 130 Pa (suggested economical change point)
Temperature: 180°C maximum in continuous service (standard grade) 100°C maximum in
continuous service (two stage grades)
EN 779:2002
DU
ALLY CER
TI
F
Reference
Type
Model
Dimensions (WxL) m
Air flow/ Pressure drop m 3 /hr/Pa
Unit weight kg
AND 1
Standard
AND 1 - 3 x 30
0.9 x 9.15
2700 / 30
9.80
AF Basic
Standard
AF Basic 3 x 30
0.9 x 9.15
2700 / 30
9.80
HEF 1330
Two Stage
HEF 1330 - 3 x 30
0.9 x 9.15
2700 / 40
11.20
Performance data
Standard type
Two stage type
Paint type
Filtration efficiency (%)
Holding capacity (kg)
Filtration efficiency (%)
Holding capacity (kg)
High Solids
97.0 - 98.1
14 - 18
98.75 - 99.1
16 - 24
Bake Enamel
93.0 - 94.5
6 - 11
97.8 - 91.15
7 - 14
Fast Dry Enamel
96.0 - 96.9
3-4
98.0 - 92.2
4-6
Two Component Epoxy
91.0 - 93.5
5-8
n/a
n/a
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
82
DI
IE
D
IN
VI
Airopac ® HT-HF
DU
ALLY CER
TI
F
W
D
• Compact design
Application: Paint bake ovens.
Type: High efficiency, high temperature, silicon free compact filter.
Gasket: Glass fibre.
Separator: Corrugated aluminium.
Sealant: Glass fibre .
Grid: Galvanised steel grille upstream and downstream.
EN 779:2002 efficiency: F6, F8.
Opacimetric efficiency: > 60%, >90%.
Temperature: 220°C maximum continuous, 250°C peak during 1 hour.
Dimensions
(WxHxD) mm
EN 779:2002
Media
surface m 2
1519.77.03 3CPMHT-HF-242412-60
592x592x292
F6
13.3
3600/110
9
0.10
1520.27.03 3CPMHT-HF-242412-90
592x592x292
F8
13.3
3600/155
9
0.10
Reference
Model
Air flow/nominal
pressure drop m 3 /h/Pa
unit
Unit
Also available in version without flange, for more information please contact us.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
83
DI
IE
D
IN
VI
• Silicon free construction
• High temperature
Class F5 to F9
EN 779:2002
• High efficiency
H10 to U17
TIFICAT
ER
E
C
Advantages
Panolair SSI - Micretain H10
Advantages
• Compact design
• Guaranteed silicone free
• Meets the requirements of the
• Very high efficiency H10
Application: Final filtration in painting booths.
Type: High efficiency pleated paper filter.
Case: Anodised aluminium extrusion.
Media: Glass fibre.
Separator: Strips of glass paper.
Grid: Painted steel grilles upstream and downstream.
MPPS efficiency: ≥ 85%.
Efficiency DOP 0.3μ: ≥ 95%.
Temperature: 70°C in continuous service.
Holding frames: Mechanical clamping structure, terminal diffusers.
TIFICAT
ER
E
C
surface treatment industry
EN 779:2002
DI
IE
D
IN
VI
DU
ALLY CER
TI
F
W
D
Unit
Filter classification Media Airflow / pressure
Unit
EN 1822
area m 2 drop / m 3 /h/Pa weight kg volume m 3
Reference
Type
Model
Dimensions
(WxHxD) mm
3409.48.00
Panolair Micretain
0.3 m/s
610x1285x44
H10
8.1
1000/110
8.0
0.04
3409.73.00
Panolair Micretain
0.5 m/s
610x610x44
H10
5.2
650/120
4.0
0.02
3409.31.00
Panolair Micretain
0.5 m/s
610x1220x44
H10
10.5
1200/120
6.5
0.04
3409.45.00
Panolair Micretain
0.5 m/s
610x1285x44
H10
11.1
1500/120
8.0
0.04
Other sizes available on request .
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
84
Also available in F8 and F9 grades.
CDM Media
Advantages
EN 779:2002
DU
ALLY CER
TI
F
Application: For fine filtration in air conditioning devices and installations, particularly final
filtration in Automotive spraybooths and drying cabinets.
Flammability: (DIN 53438) F1 self extinguishing.
Colour: White.
Media: Synthetic.
Arrestance efficiency: 95%.
Temperature: 80°C - 100°C maximum in continuous service.
Humidity: 80 - 100% RH.
Reference
Type
Model
Dimensions
(meters)
Filter
classification
EN 779:2002
Media
area m 2
Velocity/pressure drop
m/s/Pa
Dust
Unit
holding
volume
m3
g/m²
Rear
support
scrim
TA500220
Roll
TA-500
2.0 x 20
F5
40
0.25 / 54
223
0.53
no
TA500120
Roll
TA-500
1.0 x 20
F5
20
0.25 / 54
223
0.26
no
TA600GI220
Roll
TA-600 GI
2.0 x 20
F5
40
0.25 / 45
291
0.82
yes
TA600GI1620
Roll
TA-600 GI
1.6 x 20
F5
32
0.25 / 45
291
0.4
yes
TA600GI120
Roll
TA-600 GI
1.0 x 20
F5
20
0.25 / 45
291
0.304
yes
SPEU480220
Roll
SPEU-480
2.0 x 20
F5
40
0.25 / 23
399
0.615
yes
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
85
DI
IE
D
IN
VI
patterns
• Non toxic
H10 to U17
TIFICAT
ER
E
C
prevent dust loss due to
vibration
• Enhances laminar air flow
• Treated with special adhesive to
Class F5 to F9
• Thermal bonded polyester fibre
F i l t e r s f o r G a s Tu r b i n e s
Cam GT ®
Advantages
W
D
• Suitable for high humidity
• Very robust construction
conditions
• Burst pressure 7500 Pa
• Patented draining pleating
installations
Application: Air intake for gas turbines, compressors and large engines.
Type: High efficiency, incinerable compact filter.
Frame: Polypropylene and ABS.
Gasket: Expanded polyurethane placed on the downstream side (code 01).
Grid: Glass fibre reinforcement grid placed downstream.
EN 779:2002 efficiency: F7. F9.
N.B: Burst pressure: > 7500 Pa.
EFFICIENCY
GUARANTEE
Unit Type
Model
Dimensions
(WxHxD) mm
EN 779:2002
Media
area m²
Air flow/pressure drop Unit weight Unit Volume
m³/h/Pa
kg
m³
1530.12.50
CAM GT-F7
CAM GT F7-242412/01
592x592x290
F7
19
4250/120
7
0.11
B
1530.17.50
CAM GT-F9
CAM GT F9-242412/01
592x592x290
F9
19
4250/160
7
0.11
B
1530.18.50
CAM GT-H10
CAM GT H10-242412/01
592x592x290
H10
19
4250/230
7
0.11
1530.52.50
CAM GT-F7
CAM GT F7-241212/01
592x287x290
F7
9
2125/145
5
0.05
B
B
1530.57.50
CAM GT-F9
CAM GT F9-241212/01
592x287x290
F9
9
2125/180
5
0.05
1530.58.50
CAM GT-H10
CAM GT H10-241212/01
592x287x290
H10
9
2125/250
5
0.05
Available with gasket on upstream side (10). Available in reverse flow version.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
86
Energy
Rating
Reference
Campulse EF
Advantages
F
Recommended air flow per set of cartridges CY-2612/CO-2612: 2500 m3/h.
Temperature: 80°C max.
Degradation pressure: 10kPa.
Shipping data
Media area
Air flow/Pressure drop m 3 /h/Pa
m 3 / Kg
660
324
21.40
1062/211
F9
0.076
7
660
445/324
25.41
1261/211
F9
0.142
9
CY-2612
CO-2612
ALLY CE
I
RT
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
87
DI
Dimensions
mm
IE
D
IN
Model
DU
Class F5 to F9
TIFICAT
ER
E
C
Type: Single stage, high efficiency Pulse filter cartridge.
End Caps: Galvanised steel.
Liners: Expanded galvanised steel.
Media: Resin impregnated mixture of cellulose and synthetic fibres.
Seal: Adhesive bonding layer.
Gasket: Closed cell neoprene or equivalent.
Eurovent 4/9 efficiency: F9.
EN 779:2002
VI
compressors and large engines
• Air intake for gas turbines,
dusty environments
• Desert and arctic environments
H10 to U17
• Specially designed for very
Hi-Flo ® T
Advantages
• Reinforced filter media
• Suitable for turbulent air flow
• High burst strength
conditions
W
Application: Turbo machinery.
Type: Multi pocket high efficiency bag filter.
Frame: 25mm thick steel header frame.
Media: Glass fibre.
EN 779:2002 efficiency: F6, F7, F8.
Arrestance efficiency: 55-65%, 80-85%, 90-95%.
Humidity: 100% RH.
Burst Pressure: ~3000 Pa.
D
EFFICIENCY
GUARANTEE
Reference
Type
Model
Dimensions
(WxHxD)
mm
EN 779:2002
538012A1
Hi-Flo T
3 XMT-65
592x592x655
F6
7.8
3400/70
5.0
0.05
538013A1
Hi-Flo T
3 ZMT-65
287x592x655
F6
3.9
1700/70
3.0
0.03
538012A2
Hi-Flo T
3 XMT-85
592x592x655
F7
7.8
3400/90
5.0
0.05
538013A2
Hi-Flo T
3 ZMT-85
287x592x655
F7
3.9
1700/90
3.0
0.03
538012A3
Hi-Flo T
3 XMT-95
592x592x655
F8
7.8
3400/115
5.0
0.05
538013A3
Hi-Flo T
3 ZMT-95
287x592x655
F8
3.9
1700/115
3.0
0.03
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
88
Media area Air flow / pressure drop Unit weight
Unit Volume m 3
kg
m2
m 3 /hr/Pa
Dust Collector
Gold Series
Advantages
• Simple cartridge replacement
using quick release cam bars
Application: Gold Series cartridge dust and fume collectors may be used for a wide range of
pollution control and product recovery applications.
Type: Pulse cleaning, cartridge based dust collector with high performance filter elements.
Cleaning is accomplished by pulse waves that emanate from the centre of the filter providing
enhanced cleaning for a more efficient operation.
Construction: Strong modular construction using 4.5mm carbon steel for the frame and 3mm
carbon steel for the doors, hopper and panels.
Finish: As standard in a green, durable, corrosion resistant powder coated finish. Alternative
construction and colours are also available.
Options: A wide variety of options are available including: Explosion Venting, Special Inlet
Designs, BIBO (bag in-bag out) for Pharmaceutical Applications, Custom Colours, Stainless
Steel Construction, Alternative Hopper Designs etc. please contact us with your specific
requirements.
Cartridges: Vertically mounted to shed dust readily for efficient cleaning and longer service life.
High filtration efficiency meeting the 5 mg/m3 or less emissions required to re-circulate the air
back into the work place on non hazardous dusts.
Easy Changeout
Gold Cone Cartridge with patented
Cambar action that positively seals
the cartridges without using
threads or knobs.
Powerful Cleaning
System to Provide
Long Filter Life
High Entry Inlet
Cross flow is created through the filters.
Eliminates upward “can” velocities associated
with traditional hopper inlets.
Optional Quick Open
View Port in Hopper
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
89
Easy Access Door
• No Knobs To Lose or Drop
• No Threads To Bind
• Mechanically Attached Seal
• Heavy 10 gauge Construction
• Lock-Out/Tag-Out Capability
Class F5 to F9
flexibility
• Easy to install and maintain
• Modular design for optimum
HemiPleat cartridges
• Up to 25% smaller
• Customised for Original
Equipment Manufacturers
(OEM)
H10 to U17
• High collector efficiency using
Dust Collector
HemiPleat Cartridges
Advantages
• High efficiency, 99.999% at
• Open pleat spacing to enhance
0.5μ and above
• Reduced energy cost
• Long filter life
cleaning cycle
• Easy to install using quick
release cam bars
• Double seal gasket for added
security
Media Type
Dimensions
(dia. x L) mm
Media area m 2
Unit weight kg
211497-001 HemiPleat HMPTS325
PolyTech Standard
380 x 1000
30.2
13.6
211497-002 HemiPleat HMPTC325
PolyTech Carbon Impregnated
380 x 1000
30.2
13.6
211497-004 HemiPleat HMPTF325
PolyTech Fire Retardant
380 x 1000
30.2
13.6
211497-005 HemiPleat HMPTU325
Poly Tech Ultra High Efficiency
380 x 1000
30.2
13.6
211497-006 HemiPleat HMPTUF325
Poly Tech Ultra High Efficiency Fire Retardant
380 x 1000
30.2
13.6
Reference
Type
Model
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
90
Application: HemiPleat cartridges may be used for a wide range of pollution control and
product recovery applications.
Type: Pleated media cartridge with improved pleat spacing and media alignment.
Construction: Vertically mounted to shed dust readily for efficient cleaning and longer service
life. Features a cone in the centre of the cartridge to distribute the air pulse and enhance the
cleaning cycle.
Media: Several different types of filter media, pre-coat materials and over bags are available to
suit specific operating conditions. Please contact us to make this selection.
Efficiency: 99.999% at 0.5μ and above.
Options: Filter cartridge options are available to suit specific operating conditions. These
include Carbon Impregnated, Fire Retardant, Ultra High Efficiency, PTFE, and High Temperature.
Please contact us to make this selection.
H10 to U17
Class F5 to F9
Notes
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
91
Standards, Regulations and Recommendations
Ventilation filters
Classification as per Eurovent 4/4
recommendation, NaCI method
EUROVENT 4/4
Year
Reference
Type of test
Classification
1968
ASHRAE
ARRESTANCE EFFICIENCY
1980
EUROVENT 4/5
1982
AFNOR NF X 44.012
1993
CEN EN 779
G1 to G4 - F5 to F9
2003
CEN EN 779:2002
G1 to G4 - F5 to F9
EU1 to EU4 - EU5 to EU9
The new standard for general ventilation filters
EN 779:2002
1. Measurement of filter efficiency using modern particle counting technique
2. The aerosol challenge is DEHS (the same as used with HEPA filters)
3. Classification based on a particle size of 0.4 μm
4. The test includes initiatives to determine the discharged efficiency of filters to
better represent their performance in use. These are shown in Annexe A.
Initial efficiency Ei (%)
Filter class
Penetration Pi (%)
Limits of filter classes
EU 10
95 ≤ Ei < 99.9
5 ≥ Pi > 0.1
EU 11
99.9 ≤ Ei < 99.97
0.1 ≥ Pi > 0.03
EU 12
99.97 ≤ Ei < 99.99
0.03 ≥ Pi > 0.01
EU 13
99.99 ≤ Ei < 99.999
0.01 ≥ Pi > 0.001
EU 14
99.999 ≤ Ei
0.001 ≥ Pi
Clean rooms
Classification of different air qualities required
for manufacture of sterile products
Maximum number of particles per m 3 of a size greater than
or equal to
0.5 μm
5 μm
0.5 μm
inactive (b)
5 μm
Max. nbr: of μorganisms per m³
(active)
<1
active
Why a new standard?
A
3.500
0
3.500
0
Certain types of filter media rely on an electrostatic effect to achieve a high level of
efficiency whilst promising a low pressure drop for a given air volume.
B
3.500
0
350,000
2.000
10
C
350,000
2.000
3.500,000
20,000
100
not defined (c)
200
It is important that users are aware of filters that rely on this electrostatic effect
and are also informed about the degradation in efficiency once the electrostatic
effect dissipates.
This new test procedure describes in Annexe ’A’ a mechanism that removes the
electrostatic effect by treating the filter material with Isopropanol. This discharges
the filter and enables the real efficiency to be determined. The average efficiency
of the filters after discharge is recorded on the certificate.
Filters are classified based on their performance against particles of 0.4 μm.
Filters in Group F must achieve an average efficiency greater than 40%; below this
they are included in Group G.
EN 779:2002 Classification
EN 779:2002
standard
Average arrestance Am
(%)
Average efficiency Em
(%)
D
3.500,000 20,000 not defined (c)
Pharmaceutical industry
Guide to good Manufacturing Practice (2002)
(b) Corresponds approximately to the US Federal Standard 209 E and ISO as
follows: classes A and B to class 100. M 3.5. ISO 5; class C to class 10,000. M
5.5. ISO 7; class D to class 100.000. M 6.5 ISO 8.
Comparison of international classification
standards
Nbr of part 0.5 μm/
m³ (approx.)
EN ISO
14644-1
1996
US Fed. Std 209 E
1992
European Union
Pharma industry
Guide GMP 1989
France AFNOR NF
X 44.101 1981
Nbr of part 0.1
μm/ m³ (approx.)
-
-
-
ISO 1
-
-
10
1
-
-
-
-
-
35
4
-
-
ISO 2
-
-
100
EUROVENT 4/5
equivalent
10
M1
-
-
-
-
350
35
M 1.5
1
ISO 3
-
-
1,000
Filter class
100
M2
-
-
-
-
3,500
Filter
group
Filter
class
G2
65 ≤Am < 80
-
EU 2
353
M 2.5
10
ISO 4
-
-
10,000
Coarse
(G)*
G3
80 ≤Am < 90
-
EU 3
1,000
M3
-
-
-
-
35,000
G4
90 ≤Am
-
EU 4
F5
-
40 ≤Em < 60
EU 5
F6
-
60 ≤Em < 80
EU 6
F7
-
80 ≤Em < 90
F8
-
F9
-
Fine (F)
**
Filter class limits
MIL STD 282
DOP
4,000
A and B
100,000
-
-
-
350,000
1.000,000
1.000
ISO 6
-
-
M5
-
-
-
-
-
EU 7
353,000
M 5.5
10,000
ISO 7
400,000
C
-
90 ≤Em < 95
EU 8
1.000,000
M6
-
-
-
-
-
95 ≤Em
EU 9
3.530,000
M 6.5
100,000
ISO 8
4.000,000
D
-
10,000,000
M7
-
-
-
-
-
35.000,000
-
-
ISO 9
-
-
-
Permissible particle levels in different classes of
clean rooms and clean zones
Standards
1956
ISO 5
-
M 4.5
Very high efficiency filters
Type of test
100
M4
35,300
Final pressure drop: * 250 Pa ; ** 450 Pa
Reference
M 3.5
100,000
Initial efficiency (Ea) : * Ea < 20% ; ** Ea ≥20%
Year
3,530
10,000
Classification
0.3 μm
ISO classification
CD 14644-1 (1996)
-
Maximum permissible concentrations (particles/m³ of air) of particles of a
size greater than or equal to the size shown below
0.1 μm
0.2 μm
0.3 μm
0.5 μm
1 μm
10
2
-
-
-
5 μm
-
100
24
10
4
x
-
1972
AFNOR NF X 44.011
Uranine
0.15 μm
-
ISO 1
1976
EUROVENT 4/4
NaCl
0.65 μm
EU10 to EU14
ISO 2
237
102
35
8
-
MPPS
HEPA: H10 to H14
ULPA: U15 to U17
1,000
CEN EN 1822
0.1 to 0.2 μm
ISO 3
1995
ISO 4
10,000
2,370
1,020
352
83
-
23,700
10,200
3,520
832
29
237,000 102,000
35,200
8,320
293
EN 1822 Classification
MPPS integral values
Minimum
Maximum
Minimum
efficiency penetration
P.C.
(%)
(%)
HEPA (H) H10
85
15
6.7
H11
95
5
20
H12
99.5
0.5
200
H13
99.95
0.05
2.000
H14
99.995
0.005
20,000
ULPA (U) U15
99.9995
0.0005
200,000
U16 99.99995
0.00005
2.000,000
U17 99.999995 0.000005 20,000,000
HEPA : High Efficiency Particulate Air (filter)
ULPA : Ultra Low Penetration Air (filter)
P.C. : Purification Coefficient
Filter
group
Filter
class
MPPS local values
Minimum
Maximum
efficiency penetration Minimum
P.C.
(%)
(%)
99.75
0.25
400
99.975
0.025
4.000
99.9975
0.0025
40,000
99.99975
0.00025
400,000
99.9999
0.0001
1.000,000
ISO 5
100,000
ISO 6
1.000,000
ISO 7
-
-
-
352,000
83,200
2,930
ISO 8
-
-
-
3.520,000
832,000
29,300
ISO 9
-
-
-
35.200,000
8.320,000
293,000
C = 10N(0.1/D)2.08 part / m3
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
92
Standards
Operating life
Class Name
0.1 μm
0.2 μm
0.3 μm
0.5 μm
5 μm
An air filter’s operating life is not directly proportional to its useful filtering surface.
It is much better to opt for a model comprising 50% additional surface. This
increases its operating life by 100%, not 50%!
Volume Units
Volume Units
Volume Units
Volume Units
Volume Units
S1
English
m3
m3
m3
m³
m³
M1
-
350
75.7
30.9
10.0
-
M 1.5
1
1,240
265
106
35.3
-
Filter model
Effective filtering surface
Initial pressure drop at
3 600m³/ h
Operating life*
M2
-
3,500
757
309
100
-
Hi-Flo 3P 85
6.5 m2
120 Pa
3.500 hours
M 2.5
10
12,400
2,650
1,060
353
-
Hi-Flo 3M 85
100 Pa
6.500 hours
M3
-
35,000
7,570
3,090
1,000
-
9.4 m2
Gain
3 m2
20 Pa
3.000 hours
Conclusion
+ 46% in surface (x 1.5)**
- 17% in energy
+ 86% in operating life
(x 1.9)**
Actual case study
M 3.5
100
-
26,500
10,600
3,530
-
M4
-
-
75,700
30,900
10,000
-
M 4.5
1000
-
-
-
35,300
247
M5
-
-
-
-
100,000
618
M 5.5
10,000
-
-
-
353,000
2,470
M6
-
-
-
-
1.000,000
6,180
M 6.5 100,000
M7
-
-
-
-
3.530,000
24,700
-
-
-
10,000,000
61,800
* Determined using the Camfil Farr calculation charts in the Hi-Flo brochure, for an average town
environment
** factor of increase
Energy costs
Energy consumed by an air filter due to its pressure drop:
particles / m3 = 10M(0.5/d)2 . 2
particles / ft3 = Nc(0.5/d)2 . 2
Air-conditioning / Comfort
Class F5 to F9
The Efficiency %
The Penetration %
Air quality of premises with non specific pollution
Fresh air
The Purification coefficient (no units)
Regulatory aspect
Recommendations
Labour code / Circular of
application of decrees 84/10931094 dated 7/12/1984
UNICLIMA Air-conditioning & Health guide (1993)
Labour code Art. R235.2.6 Air-conditioning system inlet: 85% opacimetric (F7
Minimum arrestance
according to EN 779:2002) Air-conditioning system
efficiency 90% (G4 according
outlet: 90% opacimetric (F8 according to EN
to EN 779:2002)
779:2002)
Labour code Art. R232.5.4
Minimum opacimetric
Recycled
air
efficiency 50% (F5 according
to EN 779:2002)
85% opacimetric (F7 according to EN 779:2002)
FILTER ENGINEERING - Calculations
Acronyms and abrivations
AFNOR
French standardisation body
ASHRAE
American Society of Heating, Refrigerating and Air-conditioning Engineers
(USA)
ASPEC
Association for prevention and study of contamination (France)
An air filter’s efficiency is expressed in 3 forms:
BSI
British Standards Institute
formulas
CEN
European standardisation body
CETIAT
Technical centre for air handing and thermal industries (France)
CNC
Condensation Nucleus Counter
q x dP x h
= kWh
E=
ef x 1000
Clearly the purification coefficient is the most representative expression for high
levels of filtration. E.g.:
Efficiency 99.995 % : CE of 20,000
Efficiency 99.9998% : CE of 500 000
The second filter is 25 times more efficient than the first.
Nota : I = particle concentration upstream E = particle concentration downstream
Conversion table (%)
Efficienc
y
95
Penetration Purification Coefficient
Efficiency
Penetration
Purification
Coefficient
0.01
10,000
5
20
99.99
VOC
Volatile Organic Compounds
CSTB
Scientific and technical centre for construction (France)
DEHS
Di-Etil-Hexil-Sebaçate (= DES = DOS)
DIN
Deutsches Institut für Normung
DOP
Di-Octil-Phtalate
EUROVE
NT
European Committee of Manufacturers of Air Handing Equipment
Arrest
Arrestance efficiency
HEPA
High Efficiency Particulate Air (filter)
ISO
International Standards Organisation
MPPS
Most Penetrating Particle Size
Opa
Opacimetric efficiency
ULPA
Ultra Low Penetration Air (filter)
1
100
99.995
0.005
20,000
UNICLIM
A
Association for refrigeration equipment and air handing equipment (France)
0.5
200
99.999
0.001
100,000
VTT
Technical research centre (Finland)
99.9
0.1
1.000
99.9995
0.0005
200,000
dP
Pressure drop
99.95
0.05
2.000
99.9999
0.0001
1.000,000
99.97
0.03
3 333
99.99995
0.00005
2.000,000
99.98
0.02
5 000
99.99999
0.00001
10,000,000
99
99.5
Comperative efficiencies
on 1 μm
on 0.5 μm
E
P
PC
E
P
PC
5%
95%
1.05
1.1
90%
ARRESTANCE
10%
90%
1.1
50%
EFFICIENCY
30%
70%
1.4
10%
90%
65%
EFFICIENCY
45%
55%
1.8
25%
75%
1.3
85%
EFFICIENCY
85%
15%
6.6
70%
30%
3.3
95%
EFFICIENCY
95%
5%
20
90%
10%
10
95%
0.3 μm
≥ 98%
< 2%
≥100
≥98%
<2%
≥ 50
E = Efficiency, P = Penetration, PC = Purification Coefficient
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
93
q = flow rate (m3/s)
dP = pressure drop (Pa)
h = operating period (hours)
ef = fan efficiency (generally 0.6 to 0.7)
H10 to U17
Class Limits
US Fed Std 209 E (1992)
EFFICIENCY TESTS (Not all the tests are
equivalent)
Conversions
Speed
1 m/s = 3.6 km/h
1 km/h = 0.278 m/s
1 ft/min = 0.00508m/s
1 m/s = 196.85 ft/min
1 mile = 1.609 km
1 km = 0.621 mile
1 yd = 0.914 m
1 m = 1.09 yd
1 ft = 0.305 m
1 m = 3.28 ft
1 in = 25.4 mm
1 mm = 0.039 in
1 mm = 1.000 μm
1 μm = 0.001 mm
1 μm = 1.000 nm
1 nm = 0.001 μm
1 μm = 10,000 Å
1 Å = 0.0001 μm
1 m² = 10.8 ft²
1 in² = 6.45 cm²
1 cm² = 0.155 in²
1 m³ = 35.3 ft³
1 ft³ = 28.3 litres
MPPS (Most Penetrating Particle Size)
Length
0.01
0.1
0.05
0.3
0.5
Surface
1 ft² = 0.0929 m²
Volume
1 ft³ = 0.0283 m³
Flow rate
1 cfm = 0.472.10 -3 m³/s
1 m³/s = 3 600 m³/h
1 cfm = 1.699 m³/h
1 m³/s = 2 120 cfm
1 m³/h = 0.278.10 -3 m³/s
Weight
1 lb = 0.454 kg
1 kg = 2.20 lb
1 oz = 28.3 g
1 g = 0.0352 oz
1 N = 0.102 kgf
1 lbf = 4.45 N
1 N = 0.225 lbf
1 mmCE = 9.81 Pa
1 Pa = 0.102 mmCE
1 kPa = pz
1 kPa = 10.2 g/cm²
1 kg/cm² = 0.980665 bar
1 bar = 1.02 kg/cm²
1 kg/m² = 98.0665 kPa
1 kPa = 0.00987 atm
1 psi = 6.89 kPa
1 bar = 101325 Pa
1 atm = 101.325 kPa
1 mb = 100 Pa
1 mmCE = 1kg/m²
1 kPa = 0.145 psi
1 Pa = 1 N/m²
1 in w.g. = 254 Pa
1 kgm = 9.80665 J
1 J = 0.102 kgm
1 cal = 4.184 J
1 J = 0.239 cal
1 kWh = 3.6 MJ
1 MJ = 0.278 kWh
1 Btu = 1.055 kJ
1 J = 0.945.10-3 Btu
1 CV = 0.736
1 kW = 1.36 CV
1 kcal/h = 1.16 W
1 W = 0.860 kcal/h
1 Btu/h = 0.292 W
1 W = 3.42 Btu/h
Force
1 kgf = 9.80665 N
The NaCl test (EUROVENT 4/4) is less demanding than the DOP test, which in turn
is less demanding than the MPPS test
Pressure
Whitby diagram
Distribution of particles in atmospheric air
Energy
Nombre (1)
(1)
Number
Power
Surface (2)
Temperature: conversion formulae
0 °C = 32 °F
0 °F = -17.8 °C
°F = (9/5) x °C
+32 °C = (5/9) x °F -17.8
Poids (3)
Weight
Temperature: conversion table
°F
°C
°F
°C
°F
°C
°F
°C
0
-17,8
30
-1,1
50
10,0
80
26,7
10
-12,2
32
0
60
15,6
90
32,2
20
-6,7
40
4,4
70
21,1
100
37,8
Diameter of particles (µm)
Energy
1 J/kg = 0.239.10-3 kcal/kg
Heat transmission
1 kcal/h.m².°C = 1.16 W/(m².°C)
1 W/(m².°C) = 0.86 kcal/h.m².°C
1 Btu/(h.ft².°F) = 5.64 W/(m².°C)
1 W/(m².°C) = 0.177 Btu/(h.ft².°F)
FILTER ENGINEERING - Theory
Diagram of Whitby: This diagram shows that more than 99.90% of airborne
particles are less than or equal to 1 μm in size.
Therefore, the essential part of air filtration’s activity takes place in the invisible
domain (human ocular partition power: 30 μm).
Diagram of particle sizes
MPPS
Minimum efficiency of air filters
0.01
0.1
0.2
The overall efficiency of an air filter is the result of a combination of 4 basic
filtration mechanisms (sieving, inertia, interception and diffusion), so that the
efficiency curve of an air filter adopts a characteristic V shape showing a minimum
level of efficiency. This minimum efficiency corresponds to a particle size called
MPPS (Most Penetrating Particle Size). In other words, the MPPS is the particle
size that is the most difficult to stop. The MPPS is situated between 0.1 and 0.2
μm depending on the filter type, and the speed of air flow through the filtering
media
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
94
1 kcal/kg = 4.19.103 J/kg
Standard terms & conditions for the sale of goods
3. Description
3.1 The description of the Goods and Services shall be as set out in the Company’s quotation. Any
Specifications, drawings etc. intended to form part of the Contract will be referred to in the quotation.
3.2 Except where express agreement to the contrary in writing has been made with the Buyer, the
Company may make any changes to the specification, design, materials or finishes of the Goods:
3.2.1 which are required to conform with any applicable safety or other statutory requirements; or
3.2.2 which it deems desirable and which do not materially affect their quality or performance.
3.3 No variation in the specification or design of any Goods which, in the Company’s reasonable opinion,
does not adversely affect the suitability of the Goods for the particular purpose for which they are
supplied by the Company will constitute a breach of contract or impose any liability upon the Company.
4. Delivery of the goods
4.1 Delivery of the Goods shall be made on the basis and at such place as agreed between the parties
and as set out by the Company in the written acknowledgement of order in accordance with condition
2.6.
4.2 The Buyer will take delivery of the Goods within 10 days of the Company giving it notice that the
Goods are ready for delivery. The Buyer must accept delivery of the Goods and pay for them in full.
4.3 Notwithstanding condition 4.1, any dates specified by the Company for delivery of the Goods are
approximate only and may not be made of the essence by notice.
4.4 If the Buyer fails to take delivery of the Goods when they are ready for delivery pursuant to condition
4.1 or to provide any instructions, documents, licences or authorisations required to enable the Goods to
be delivered on time (except because of the Company’s fault) risk in the Goods will pass to the Buyer
(including, without limitation, for loss or damage caused by the Company’s negligence); the Goods will be
deemed to have been delivered and (without prejudice to its other rights) the Company may:
4.4.1 store or arrange for the storage of the Goods until actual delivery or sale and charge the Buyer for
all related costs and expenses (including, without limitation, storage and insurance); and/or
4.4.2 following written notice to the Buyer, sell any of the Goods at the best price reasonably obtainable
in the circumstances and charge the Buyer for any shortfall below the price under the Contract.
4.5 If carriage is required in accordance with condition
4.5.1 the Goods shall be transported by such means as the Company thinks fit unless the Buyer has
specified in its order the details of the contract with a carrier which it reasonably requires having regard
to the nature of the Goods and the other circumstances of the case.
4.6 Off-loading by the Buyer
4.6.1 Where it is agreed that the Buyer shall off-load the Goods the Buyer will provide at its expense at
the Delivery Point adequate and appropriate equipment and manual labour for off-loading the Goods.
4.6.2 Where condition
4.6.1 applies, the Buyer will indemnify the Company against any liability and expense (whether arising
under statute or common law) caused by the Buyer’s failure to provide appropriate equipment and
manual labour for off-loading (whether or not the off-loading is supervised by or on behalf of the Buyer)
for:
4.6.2.1 any personal injury to or death of any of the Company’s employees, agents or sub-contractors or
any third party; and
4.6.2.2 any damage to or loss of any property of the Company, its employees, agents or sub-contractors
or any third party.
4.7 Instalments
4.7.1 The Company may make delivery of the Goods by instalments.
4.7.2 Each separate instalment shall be invoiced and paid for in accordance with the Contract.
4.7.3 Failure by the Company to deliver any one or more (but not all) instalments in accordance with a
Contract or any claim by the Buyer in respect of any one or more (but not all) instalments shall not entitle
the Buyer to treat that Contract as repudiated.
4.7.4 Failure by the Buyer to pay for any one or more instalments in accordance with a Contract shall
entitle the Company (without prejudice to its other rights and remedies):
4.7.4.1 to suspend without further notice deliveries of Goods or goods under any other contract between
the Company and the Buyer pending payment by the Buyer; and/or
4.7.4.2 to treat that Contract as repudiated by the Buyer.
4.8 Non-Delivery of the Goods
4.8.1 Irrespective of condition 4.5, the quantity of any consignment of Goods as recorded by the
Company upon despatch from the Company’s place of business shall be conclusive evidence of the
quantity received by the Buyer on delivery unless the Buyer can provide conclusive evidence proving the
5.6 Where the Services are to be performed or the Goods are to be supplied outside the UK, the Buyer
will assist the Company to ascertain the nature and extent of and to comply with laws, regulations, orders
or by-laws of any local or national authority having the force of law in the country where the Services are
to be performed or the Goods supplied, or which may affect the Company in the performance of its
obligations under the Contract.
5.7 Unless otherwise agreed in writing by the Company, any dates specified by the Company for
Practical Completion are approximate only and may not be made of the essence by notice. If no dates
are so specified, Practical Completion will be within a reasonable time of the Company being provided
with suitable access to the Site.
5.8 Subject to the other provisions of these terms and conditions the Company will not be liable for any
loss (including loss of profit), costs, damages, charges or expenses caused directly or indirectly by any
delay in or failure to achieve the Practical Completion by any date or within any time period set out in the
Contract (even if caused by the Company’s negligence).
5.9 Where the Company incurs extra cost during the provision of the Services resulting from suspension
of work, the Buyer’s instructions or lack of instructions, the Buyer’s act or omission, the Buyer’s failure or
delay to comply with the obligations of condition 5.5 and 5.6, interruptions, delays, overtime, unusual
hours, mistakes, or work for which the Company is not responsible, such extra cost as well as the cost
incurred by keeping any of the workforce on Site after completion of the Services on Site, shall be added
to the Contract price and be for the account of the Buyer and in accordance with the provisions of the
Contract.
5.10 Where Services have been provided by the Company the Goods shall be deemed to be accepted by
the Buyer at the earlier of:
5.10.1 the Company certifying in writing that erection is complete, or where the Company is required to
test the Goods on Site, the Company certifying that the Goods have passed such tests; or
5.10.2 the Buyer taking over the Goods.
6. Force majeure
6.1 The Company shall not be liable to the Buyer in any manner or be deemed to be in breach of a
Contract (subject to condition 10) because of any delay in performing or any failure to perform any of the
Company’s obligations under this Contract if the delay or failure was due to any cause beyond the
Company’s reasonable control.
6.2 Without prejudice to the generality of condition 6.1 the following shall be included as causes beyond
the Company’s reasonable control:
6.2.1 governmental actions, war or threat of war, national emergency, riot, civil disturbance, sabotage,
terrorism or threat of terrorism or requisition;
6.2.2 Act of God, fire, explosion, flood, epidemic or accident;
6.2.3 import or export regulations or embargoes;
6.2.4 labour disputes not including disputes involving the Company’s work-force;
6.2.5 inability to obtain or delay in obtaining supplies of adequate or suitable material, fuel, parts,
machinery or labour; or
6.2.6 any failure or negligence or breach of contract on the part of the Buyer or its sub-contractors,
contractors, agents or employees.
7. Risk/Ownership
7.1 Risk or damage to or loss of Goods shall pass to the Buyer upon delivery of the Goods, (unless
otherwise agreed in writing by the parties).
7.2 Ownership of the Goods shall not pass to the Buyer until the Company has received in full (in cash or
cleared funds) all sums due to it in respect of:
7.2.1 the Goods and Services; and
7.2.2 all other sums which are or which become due to the Company from the Buyer on any account.
7.3 Until ownership of the Goods has passed to the Buyer, the Buyer must:
7.3.1 hold the Goods on a fiduciary basis as the Company’s bailee;
7.3.2 store the Goods (at no cost to the Company) separately from all other goods of the Buyer or any
third party in such a way that they remain readily identifiable as the Company’s property;
7.3.3 not destroy, deface or obscure any identifying mark or packaging on or relating to the Goods;
7.3.4 maintain the Goods in satisfactory condition insured on the Company’s behalf for their full price
against all risks to the reasonable satisfaction of the Company. On request the Buyer shall produce the
policy of insurance to the Company; and
7.3.5 hold the proceeds of the insurance referred to in condition 7.3.4 on trust for the Company and not
mix them with any other money, nor pay the proceeds into an overdrawn bank account.
7.4 The Buyer may resell the Goods before ownership has passed to it solely on the following conditions:
7.4.1 any sale shall be effected in the ordinary course of the Buyer’s business at full market value and the
Buyer shall account to the Company accordingly; and
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
95
Class F5 to F9
5.1 The Services shall be performed in the manner set out in the Specification.
5.2 The Company shall agree with the Buyer the date and the place at which the Goods shall be ready for
testing and commissioning as provided for in the Contract.
5.3 Any dates specified by the Company for testing and commissioning as provided for in the Contract
are approximate only and may not be made of the essence by notice.
5.4 Company’s Obligations
5.4.1 Subject to the provisions of the Contract, the Company shall with due skill and care design,
manufacture and deliver to site, erect, test and commission the Goods, carry out the Services and
complete any tests provided for in the Contract.
5.5 Buyer’s Obligations
5.5.1 The Buyer shall provide (or shall procure the provision of) at its own expense and in a timely
manner the Company and its employees, agents and sub-contractors with:
5.5.1.1 all necessary access to the Site in reasonable time for the proper performance of the Contract
and to include access to such roads or other means of access as may be necessary;
5.5.1.2 all relevant consents, wayleaves, approvals, import licences and permits as are required for the
provision of the Services by the Company;
5.5.1.3 all building structures, foundations, approaches or work equipment or materials within the time
specified in the Contract and of the quantity specified and in a condition suitable for the efficient
transportation, reception, installation and maintenance of the Goods and/or Services;
5.5.1.4 any suitable lifting equipment belonging to the Buyer that may be available on Site to operate for
the purposes of the Services;
5.5.1.5 where agreed in the Contract, make available sufficiently skilled persons necessary to perform
the Services (including, without limitation, masons, joiners, builders and electricians);
5.5.1.6 such supplies of electricity, water, gas, air and other substances or facilities at the Site for use
by the Company that may be specified in the Contract;
5.5.1.7 where the Contract provides for any tests or commissioning on Site, unless otherwise stated in
the Contract, such fuel, electricity and other services or materials that may reasonably be requested by
the Company to enable such tests or commissioning to be carried out effectively;
5.5.1.8 access to a canteen or restroom (where available);
5.5.1.9 appropriate waste disposal facilities (including, without limitation, a designated waste point on
Site); and
5.5.1.10 all assistance as may be reasonably required by the Company as necessary for the proper
performance of the Contract.
H10 to U17
2.1 Subject to any variation under condition 2.4, each Contract will be on these terms and conditions to
the exclusion of all other terms and conditions (including any terms or conditions which the Buyer
purports to apply under any purchase order, confirmation of order or similar document).
2.2 The order for Goods and Services by the Buyer from the Company shall be deemed to be an offer by
the Buyer to purchase such Goods and Services subject to these terms and conditions.
2.3 No terms or conditions endorsed upon, delivered with or contained in the Buyer’s Specification,
purchase order or similar document will form part of any Contract simply as a result of a reference to
such document being referred to in a Contract.
2.4 Any variation to these terms and conditions and any representations about the Goods and Services
shall have no effect unless expressly agreed in writing and signed by either the Commercial Manager or a
Director of the Company. The Buyer must ensure that the terms of its purchase order and any applicable
Specification are complete and accurate.
2.5 Acceptance of delivery of the Goods or commencement of the performance of the Services shall be
deemed to be conclusive evidence of the Buyer’s acceptance of these terms and conditions.
2.6 Any quotation is given on the basis that no Contract will come into existence until the Company
despatches a written acknowledgement of order to the Buyer. Any quotation is valid for a period of 30
days only from its date provided the Company has not previously withdrawn it.
2.7 No order which the Company has accepted may be cancelled by the Buyer except with the written
agreement of the Company in response to a written request of the Buyer and on terms that the Buyer
shall indemnify the Company in full against all losses (including loss of profit), costs, damages, charges
and expenses suffered or incurred by the Company as a result of such cancellation.
5. Services
2. Formation and incorporation
contrary.
4.8.2 Irrespective of condition 4.5, the Company shall not be liable for any non-delivery of Goods (even if
caused by the Company’s negligence) unless written notice is given to the Company within 7 days of the
date when the Goods would in the ordinary course of events have been delivered.
4.8.3 Any liability of the Company for the Goods for non-delivery shall be limited to replacing the Goods
within a reasonable time or at the option of the Company issuing of a credit note against any invoice
raised for such Goods.
4.8.4 A signature of qualified acceptance on a carrier’s delivery note shall not be written notice to either
the carrier or the Company for the purpose of these terms and conditions.
1.1 In these terms and conditions the following words have the following meanings: “Business Days” any
day other than a Saturday or Sunday or a public or bank holiday In England; “Buyer” the person(s) or
company whose order for the Goods is accepted by the Company; “Company” Camfil Limited t/a Camfil
Farr with company registration number 01404355 and with registered office at Knowsley Road,
Haslingden, Lancashire BB4 4EG; “Contract” any contract between the Company and the Buyer for the
sale and purchase of the Goods; “Delivery Point” the place where delivery of the Goods is to take place
under condition 4; “Goods” any goods which the Company is to supply to the Buyer (including any of them
or any part of them); “Intellectual Property” all intellectual and industrial property rights, including without
limitation, patents, rights in Know-How, trade marks, registered designs, models, unregistered design
rights, unregistered trade marks and copyright (whether in drawings (including manufacturing drawings),
plans, specifications, designs and computer software or otherwise), database rights, topography rights,
any rights in any invention, discovery or process, and applications for and rights to apply for any of the
foregoing, in each case in the United Kingdom and all other countries in the world; “Operational
Parameters” operational conditions under which the Goods will operate safely and effectively as referred
to in the quotation; “Practical Completion” the completion of the provision of the agreed Services by the
Company; “Services” any design work, assembly, installation, testing, commissioning and maintenance
services which the parties have agreed the Company is to supply to the Buyer (including any of them or
any part of them); “Site” the site at which the Company is to perform the Services; “Specification” the
written specification of technical requirements by the Buyer in relation to the provision of the Goods and/
or Services by the Company.
1.2 The headings in these terms and conditions are for convenience only and shall not affect their
interpretation.
1. Interpretation
Standard terms & conditions for the sale of goods
7.4.2 any such sale shall be a sale of the Company’s property on the Buyer’s own behalf and the Buyer
shall deal as principal when making such a sale.
7.5 Where the Company is unable to determine whether any goods are the Goods, the Buyer shall be
deemed to have sold all goods of the kind sold by the Company to the Buyer in the order in which they
were invoiced to the Buyer.
7.6 The Company shall be entitled to recover payment for the Goods notwithstanding that ownership of
any of the Goods has not passed from the Company.
7.7 The Buyer grants the Company, its agents and employees an irrevocable licence at any time to enter
any premises where the Goods are or may be stored in order to inspect them, or, where the Buyer’s right
to possession has terminated, to recover them.
Company’s total liability arising in connection with the performance or contemplated performance of the
Contract by reason of any breach of contract or of statutory duty or tort (including but not limited to
negligence), or any failure to perform or delay in performing of any obligations by the Company under the
Contract shall be limited to the £[Contract Price]; and
10.2.5.2 the Company shall not be liable by way of indemnity or by reason of any breach of contract or
of statutory duty, by reason of tort (including but not limited to negligence) for any loss of profit, loss of
use, loss of production, loss of contracts, loss of goodwill or for any financial or economic loss or for any
indirect or consequential damage whatsoever that may be suffered by the Buyer.
11. Termination
8.1 The price for the Goods and Services shall be the Company’s quoted price referred to in the
Company’s quotation which shall be binding upon the Company only if the Buyer accepts the Company’s
quotation within 30 days (provided the quotation has not already been withdrawn by the Company) after
which time it may be altered by the Company without notice.
8.2 Unless otherwise agreed in writing between the parties, the price for the Goods and Services is
exclusive of any:
8.2.1 value added tax or other applicable tax;
8.2.2 transport, packaging, loading, unloading and insurance;
8.2.3 in the case of export, import duties, dues, taxes and other charges; and
8.2.4 cost of obtaining any applicable licences and permits necessary to perform the Contract, which the
Buyer shall pay in addition when it is due to pay for the Goods and Services in accordance with the
Contract.
8.3 The Company may, by giving notice to the Buyer at any time increase the price of the Goods and
Services to reflect any increase in the cost of manufacture or delivery of the Goods or performance of
the Services which is due to:
8.3.1 any factor beyond the reasonable control of the Company; this includes without limitation, foreign
exchange fluctuation, currency regulation, alteration of duties and taxes;
8.3.2 any change in delivery dates, quantities or specifications for the Goods and Services requested by
the Buyer;
8.3.3 any delay caused by any instructions of the Buyer or failure of the Buyer to give the Company
adequate information or instructions. Any dispute as to the amount of any increase in price shall be
determined by the Company’s auditors whose decision shall be conclusive and binding on the Company
and the Buyer.
9. Payment
9.1 The Company may invoice the Buyer for the Goods and Services in accordance with the terms set
out in the Company’s quotation.
9.2 Time for payment shall be of the essence.
9.3 Payment of the price for the Goods and Services is due in sterling or such other agreed currency
within 10 (ten) Business Days of the date of receipt of the invoice.
9.4 No payment shall be deemed to have been received until the Company has received cleared funds.
9.5 All payments payable to the Company under this Contract shall become due immediately upon
termination of this Contract despite any other provision.
9.6 The Buyer shall make all payments due under this Contract without any deduction whether by way of
set-off, counterclaim or otherwise unless the Buyer has a valid court order requiring an amount equal to
such deduction to be paid by the Company to the Buyer.
9.7 If the Buyer fails to make any payment under this Contract on the due date then (without prejudice to
its other rights and remedies):
9.7.1 the Company may charge the Buyer interest (both before and after judgement) on the amount
unpaid at the annual rate of 4% above the base rate of SEB, Cannon Street, London, from time to time
until payment is made in full (a part of a month being treated as a full month for the purpose of calculating
interest); and
9.7.2 the Company shall be entitled to suspend performance of any of its obligations under the Contract
until the outstanding amount has been received by the Company from the Buyer.
10. Quality
10.1 Warranty
10.1.1 The Company warrants that (subject to the other provisions of these terms and conditions) upon
delivery the Goods will, and for a period of 12 (twelve) months from the date of delivery, be of
satisfactory quality within the meaning of the Sale of Goods Act 1994.
10.1.2 The Company will, free of charge, within a period of 12 (twelve) months from the date of delivery
(or deemed delivery under condition 4.4) repair or, at the option of the Company replace Goods (or the
relevant part of the Goods) which are proved to the reasonable satisfaction of the Company to have been
at the time of delivery (a) damaged or defective; or (b) not complying with the Specification due to
defects in material, or workmanship or design (other than a design made, furnished or specified by the
Buyer). This obligation will not apply where:
10.1.2.1 the Buyer has failed to notify the Company of any defect or suspected defect within 14 days of
the delivery where the defect should be apparent on reasonable inspection, or within 14 days of the same
coming to the knowledge of the Buyer (where the defect is not one which should be apparent on
reasonable inspection) and in any event no later than 12 (twelve) months from the date of delivery; or
10.1.2.2 the Buyer has failed to give the Company a reasonable opportunity of examining such Goods
after receiving the notice of any defect or suspected defect; or
10.1.2.3 the defect arises because the Buyer (or the Buyer’s customer) failed to follow the Company’s
oral or written instructions as to the storage, installation, testing and commissioning (if applicable), use,
Operational Parameters or maintenance of the Goods or (if there are none) good trade practice; or
10.1.2.4 the Buyer (or the Buyer’s customer) alters or repairs such Goods or without the written consent
of the Company; or
10.1.2.5 the defect in such Goods arises from any defect in any drawing, design, Specification or
instruction supplied or approved by the Buyer. Any Goods replaced will belong to the Company and any
repaired Goods or replacement Goods will be guaranteed on these terms and conditions for the
unexpired portion of the 12 (twelve) month period from the original date of delivery of the replaced
Goods.
10.1.3 Any Goods repaired or replaced by the Company pursuant to this condition 10 will be supplied to
these terms and conditions.
10.1.4 If the Company complies with condition 10.1.2 it shall have no further liability for a breach of
warranty in condition
10.1.5 in respect of the quality of such Goods.
10.2 Indemnity and Limitation of liability
10.2.1 The Buyer shall indemnify the Company against all liability, actions, proceedings, costs, claims,
damages or demands in any way connected with this Contract brought or threatened to be brought
against the Company by any third party except to the extent the Company is liable to the Buyer in
accordance with these terms and conditions.
10.2.2 Subject to condition 10.1.1 and to the maximum extent permissible in law, all conditions and
warranties which are implied by statute or otherwise by general law into any Contract or relating to the
Goods or the Services are hereby excluded.
10.2.3 The Company does not, unless otherwise expressly provided in the Contract, warrant that the
Services or the Goods as described or provided or the incorporation thereof within some larger project
will satisfy the Buyer’s requirements.
10.2.4 The Company will accept unlimited liability for:
10.2.4.1 death or personal injury caused by the negligence of the Company; and
10.2.4.2 any breach of its obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2
of the Supply of Goods and Services Act 1982; and
10.2.4.3 fraudulent misrepresentation.
THE BUYERS ATTENTION IS IN PARTICULAR DRAWN TO THE PROVISION OF CONDITION 10.2.5
10.2.5 Subject to conditions 10.2.2, 10.2.3 and 10.2.4:
10.2.5.1 except in the case of any liability on the part of the Company referred to in condition 10.2.4, the
11.1 Each Contract will terminate immediately upon the happening of any one or more of the following
events; the Buyer has a bankruptcy order made against him or makes an arrangement or composition
with his creditors or otherwise takes the benefit of any Act for the time being in force for the relief of
insolvent debtors, or (being a body corporate) convenes a meeting of creditors (whether formal or
informal) or enters into liquidation (whether voluntary or compulsory) except a solvent voluntary liquidation
for the purpose only of reconstruction or amalgamation, or has a receiver, manager, administrator or
administrative receiver appointed of its undertaking or any part thereof, or a resolution is passed or a
petition presented to any court for the winding-up of the Buyer or for the granting of an administration
order in respect of the Buyer or any proceedings are commenced relating to the insolvency or possible
insolvency of the Buyer.
11.2 Each Contract will terminate immediately upon service of written notice of termination by the
Company on the Buyer on the happening of any one or more of the following; the Buyer suffers or allows
any execution whether legal or equitable to be levied on his/its property or obtained against him/it, or
fails to observe or perform any of his/its obligations or duties under the Contract or any other contract
between the Company and the Buyer or is unable to pay its debts within the meaning of section 123 of
the Insolvency Act 1986 or the Buyer ceases to trade.
11.3 The Company’s rights contained in condition 6, 7,9 and 10 (but not the Buyer’s rights) shall continue
beyond the discharge of the Buyer’s and the Company’s primary obligations under the Contract
consequent upon its termination.
11.4 The termination of the Contract howsoever arising shall be without prejudice to the rights and duties
of either the Buyer or the Company accrued prior to termination.
12. Communication
12.1 All communications between the parties about any Contract must be in writing and delivered by
hand or sent by pre-paid first class post or sent by facsimile transmission or electronic mail:12.1.1 (in case of communications to the Company) to its registered office or such changed address as
shall be notified to the Buyer by the Company; or
12.1.2 (in the case of the communications to the Buyer) to the registered office of the addressee (if it is
a company) or (in any other case) to any address of the Buyer set out in any document which forms part
of the Contract or such other address as shall be notified to the Company by the Buyer.
12.2 Communications shall be deemed to have been received:
12.2.1 if sent by pre-paid first class post, 2 Business Days after posting (exclusive of the day of posting);
12.2.2 if delivered by hand, on the day of delivery;
12.2.3 if sent by facsimile transmission or electronic mail on a working day prior to 4:00pm, at the time
of transmission and otherwise on the next working day.
12.3 Communications addressed to the Company shall be marked for the attention of the Commercial
Manager or a Director of the Company.
13. Intellectual property rights
13.1 Where the Goods or any part of them are manufactured or any process is to be applied to the
Goods by or on behalf of the Company to the Specification then the Buyer shall indemnify the Company
against all liability, actions, proceedings, costs, claims, damages or demands in any way connected with
the Contract brought or threatened to be brought against the Company by any third party as a result of
the infringement or alleged infringement of any third party’s Intellectual Property Rights. If any such claim
is brought or threatened against the Company then the Company shall be entitled to suspend deliveries of
the Goods and/or performance of the Services.
13.2 All information of any kind (including without limitation drawings, specifications, plans, descriptions,
blue prints, designs, documents and technical information) supplied by the Company to the Buyer is
supplied on the strict understanding that the Intellectual Property Rights therein and in the Goods and the
Services are vested in and shall remain the sole property of the Company. If the Buyer shall in any way
acquire such rights then the Buyer shall immediately inform the Company and shall take such steps
immediately as may be required by the Company to assign such rights or vest title in such rights in the
Company.
14. General
14.1 Time for performance of all obligations of the Buyer is of the essence.
14.2 Each right or remedy of the Company under the Contract is without prejudice to any other right or
remedy of the Company whether under the Contract or not.
14.3 Any provision of the Contract which is held by any competent authority to be invalid, void, voidable,
unenforceable or unreasonable (in whole or in part) shall to the extent of such invalidity, voidness,
voidability, unenforceability or unreasonableness be deemed severable and the other provisions of the
Contract and the remainder of such provision shall not be affected.
14.4 Failure by the Company to enforce or partially enforce any provision of the Contract will not be
construed as a waiver of any of its rights under the Contract.
14.5 The Company may assign, license or sub-contract all or any part of its rights or obligations under
the Contract without the Buyer’s consent.
14.6 The Contract is personal to the Buyer who may not assign, license or sub-contract all or any of its
rights or obligations under the Contract without the Company’s prior written consent.
14.7 The Company and the Buyer do not intend that any of the terms of the Contract will be enforceable
by virtue of the Contracts (Rights of Third Parties) Act 1999 by any person not a party to it.
14.8 The formation, construction, performance, validity and all aspects of the Contract are governed by
English law and the parties submit to the non-exclusive jurisdiction of the English Courts.
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
96
8. Price
H10 to U17
Class F5 to F9
Notes
Tel: +44 (0) 1706 238000, Fax: +44 (0) 1706 226736
97
Head Office :
Regional Centres :
MANCHESTER
LONDON
Head Office & Manufacturing Plant
Camfil Limited
Knowsley Road
Haslingden
Lancashire
BB4 4EG
Tel: +44 (0) 1706 238000
Fax: +44 (0) 1706 226736
MIDLANDS
SCOTLAND
Industry Segment Specialists :
AIR HYGIENE
Viv Turner
AUTOMOTIVE
Mark Taylor
COMFORT SEGMENT
Glasgow
David Moulton
CONSULTANTS & SPECIFIERS
Peter Dyment
CONTAINMENT SYSTEMS
Mike Vinson
DUST CONTROL
Manchester
John Purvis/Matthew Brown
Birmingham
FOOD INDUSTRY
Tim Pagett
GAS TURBINE
Martin Stenton
London
HOSPITALS
Dave Rimmer
MOLECULAR FILTRATION
Chris Ecob
PHARMACEUTICAL
Neil Orrill
VEHICLE REFINISHING
Gary Warrington
On world standards...
...Camfil Farr is the leader in clean air
technology and air filter production.
Camfil Farr has its own product
development, R&D and world wide local
representation.
Our overall quality goal is to develop,
produce and market products and services
of such a quality that we aim to exceed our
customers expectations.
We see our activities and products as an
expression of our quality.
To reach a level of total quality it is
necessary to establish an internal work
environment where all Camfil Farr
employees can succeed together. This
means an environment characterised by
openness, confidence and good business
understanding.
Camfil Limited
Knowsley Road
Haslingden
Lancashire
BB4 4EG
Tel: +44 (0) 1 706 238000
Fax: +44 (0) 1 706 226736
E-mail: [email protected]

product catalogue

Transcription

Similar documents

3030-Absolute-Durafil_4V-Pharmaceutical-M

PREPERATION AREAS

FleetValue ™ Oil Filters

Greater Cincinnati Water Works Filter Distribution

Extend Lube Filter life and reduce operating cost

Hydro-Filter™ - Phoenix Truckmounts

570-491 EZflex:Layout 1.qxd

High Temperature HEPA Filters FAQs Technical Bulletin

Listing on Commercial Deep Fryers

- Breedveld en Weaver