Full-size Single Board Computer Quick Reference Table

Transcription

Full-size Single Board Computer Quick Reference Table
Model
CPU/Max.
ACTI-777
Dual Pentium III/850MHz
Front Side Bus
Cache
Max. Memory
Memory Type
ECC
BIOS
Chipset
DiskOnChip
PC-104
VGA/Panel
SCSI
HDD Channel
FDD Drivers
Ethernet
USB Port
ATX control
On Board I/O
Serial Port
Parallel Port
PS/2 K/B
PS/2 Mouse
WDT
IrDA
Dimension (mm)
100MHz
Built-in CPU
RIMMx2/ 2GB
RDRAM (RAMBUS)
YES
Award
Intel 840
Max. 288MB
NO
C&T 69000 / NO
NO
EIDEx2
2
10/100 Base-T
2
YES
W83627HF
2
1
YES
YES
YES
YES
338.5(L) x 129(W)
ROBO-668
Dual Pentium III/850; Celeron/533MHz
Single Pentium III/850; Celeron/700MHz
66/100MHz
Built-in CPU
DIMMx4/ 1GB
SDRAM
YES
AMI
Intel 440BX
Max. 288MB
N/A
C&T 69000 / NO
AIC-7892 Ultra 160 Optional
EIDEx2
2
10/100 Base-T
2
YES
W83977ATF
2
1
YES
YES
YES
YES
339.5(L) x 122(W)
ROBO-678
Pentium/933MHz
Celeron/700MHz
66/100/133MHz
Built-in CPU
DIMMx2/ 512MB
SDRAM
NO
Award
Intel 815E
Max. 288MB
N/A
815E built-in / NO
AIC-7892 Ultra 160 Optional
EIDEx2 ATA/100
2
Dual 10/100 Base-T
2
YES
W83627HF
2
1
YES
YES
YES
YES
338.5(L) x 122(W)
Model
CPU/Max.
ROBO-698
Celeron/700MHz
Pentium III/850MHz
ROBO-658
Celeron/700MHz
Pentium III/850MHz
ROBO-608
Celeron/700MHz
Pentium III/850MHz
Front Side Bus
Cache
Max. Memory
Memory Type
ECC
BIOS
Chipset
DiskOnChip
PC-104
VGA/Panel
SCSI
HDD Channel
66/100MHz
Built-in CPU
DIMMx4/1GB
SDRAM
YES
AMI
Intel 82440BX
Max. 288MB
NO
C&T 69000 / YES
NO
EIDEx2
66/100MHz
Built-in CPU
DIMMx4/1GB
SDRAM
YES
AMI
Intel 82440BX
Max. 288MB
YES
C&T 69000 / YES
NO
EIDEx2
FDD Drivers
Ethernet
USB Port
ATX control
On Board I/O
Serial Port
Parallel Port
PS/2 K/B
PS/2 Mouse
WDT
IrDA
Dimension (mm)
2
10/100 Base-T
2
YES
W83977ATF
2
1
YES
YES
YES
YES
338.5(L) x 122(W)
66/100 MHz
Built-in CPU
DIMMx2/512MB
SDRAM
NO
AMI
Intel 810e
Max. 288MB
NO
GMCH built-in
AIC-7892 Ultra 160
EIDEx2
DMA33/66
2
10/100 Base-T
2
YES
W83627HF
2
1
YES
YES
YES
YES
338.5(L) x 122(W)
ROBO-598
P55C/233MHz
AMD K6/550MHz
Cyrix M1/M2 /450MHz
66/100MHz
512KB Pipeline
DIMMx3/768MB
EDO/SDRAM
NO
AMI
ALi M1541/1543C
Max. 288MB
NO
ATI Rage Pro AGP
NO
EIDEx2
2
NO
2
YES
W83977ATF
2
1
YES
YES
YES
YES
338.5(L) x 122(W)
2
NO
2
YES
Built-in Chipset
2
1
YES
YES
YES
YES
339.5(L) x 122(W)
ACTI-777
The Most Advanced PICMG SBC, Based on Dual Intel ® Pentium ® III Processors
with Intel Graphics and Ethernet Solutions (RIMM Memory Supported)
◆
Support dual Socket 370 Pentium® III
(FC-PGA) processor with 100MHz FSB
up to 850MHz
◆
Support two channel RDRAM memory
up to 2GB
◆
Support C&T 69000 chips
◆
On board Intel® 82559 10/100 Base-T
Ethernet
CPU
◆
Support one or two Intel® Pentium ® III
processors for the PGA370 Socket
Chipset
◆
Intel® i840 AGPset, including
- 82840 memory controller hub (MCH)
- 82801 I/O controller hub (ICH)
- 82802 firmware hub (FWH)
Memory
◆
Two 184-pin RIMM sockets with max.
2GB capacity
◆
Support Ultra DMA33/66 IDE mode
◆
PCI Bus spec V2.1 compliant
BIOS
◆
Full-size all-in-one SBC with PICMG 1.0
Rev 2.0 compliant
On-Board I/O
◆
◆
Reserve space around IDE interface
connector to fit DOM (Disk-On-Module)
◆
Fully support ATX function with WOL,
Modem-Ring On, K/B & Mouse wake-up
◆
ISA64 driving capability
◆
Hardware monitoring and watchdog timer
for system protection
Additional Functionality
Specifications
◆
Award BIOS-Plug-n-Play compatible
Support two EIDE channels up to four
HDDs (Ultra DMA 33/66) 2S/1P, two
USB ports* and one IrDA infrared port
Integrated Graphics Controller
C&T 69000 Video display chipset
Adopt PCI interface, built-in 2MB VRAM
◆ DB15 connector at the rear panel
◆ Support display resolution up to
1280x1024,256 colors
◆
◆
Ethernet 10/100 Controller
Intel® 82559 PCI fast Ethernet controller
RJ-45 connector at the rear panel
◆ Support IEEE 802.3 auto-negotiation
algorithm of full-duplex and half-duplex
operation for 10Mb/s and 100Mb/s (NWAY)
◆
◆
DiskOnChip Flash Disk
◆
Support M-Systems' flash disk up to
288MB
System Hardware Monitor
Winbond super I/O is used to monitor
supply voltages to user programmable
voltage levels within 16 mV
◆ Separately monitor up to three fan
tachometer inputs for rotation speeds
and three temperatures sense via two
thermistors circuit
◆ Beep alarms for failed fan out, over/under
voltage of DC voltages, and over
temperature threshold
◆
Watchdog Timer
Watchdog timeout period programmable
via S/W from 0.5 to 254.5 sec./min.
◆ Can be enabled/disabled by jumper setting
◆
PS/2 Mouse
◆
◆
Routed to 6-pin mini-DIN on rear bracket
Shared 6-pin mini-DIN connector with
K/B (Auto-swap)
Power Requirement
"*" Only one USB port available when
◆
installed into standard chassis
+5V@10A (typ.),+12V@300mA,
-12V@30mA
Board Dimension
338.5(L) x 129(W) mm
13.33"(L) x 5.1"(W)
◆ 8-layer PCB
◆
◆
Operating Temperature
◆
ACTI-777
The most advanced PICMG SBC based
on dual Intel® Pentium® III processors
with Intel® graphics and Ethernet
solutions (RIMM memory supported)
0 to +55˚C
Storage Temperature
◆
Ordering Guide
-20 to +75˚C
2
ROBO-668
Advanced PICMG SBC with On-Board AGP VGA, Fast Ethernet ,
Based on the Dual Socket 370 Processor
Specifications
◆
SupportIntel ® Pentium® III or Celeron™
processor with 66/100MHZ FSB
CPU
◆
◆
Single or dual processors
◆
Support C&T 69000 chips
◆ Intel®
82440BX chipset
Chipset
◆
◆
Support up to 1GB of SDRAM memory
with ECC function
C&T 69000 AGP VGA display with 2MB
SDRAM
◆
Intel® 82559 Fast Ethernet
◆
Proprietary PCI connector for expansion
(optional daughter board provided, such
as Ultra 160 SCSI or fast Ethernet)
◆
Two EIDE, two serial port, parallel port,
two USB ports
◆
Watchdog Timer
◆
System hardware monitoring
◆
Rev 2.0 compliant
Intel ® 82440 BX chipset
Memory
◆
◆
One or dual Socket 370 Intel® Pentium® III
or Celeron™processors up to 850MHZ
Four 168-pin DIMM sockets support up
to 1GB of PC-100 SDRAM
BIOS
◆
AMI system BIOS (256KB flash ROM)
On-Board I/O
◆
On-board Winbond W83977ATF super
I/O with two USB ports*
Watchdog Timer
◆
via S/W from 0.5 to 254.5 sec./min.
PS/2 Keyboard/Mouse
Single 6-pin mini-DIN Keyboard/mouse
connector on rear bracket
◆ One additional 5-pin header connector
for external keyboard connection through
Portwell Backplane
◆
Power Requirement
◆
+5V@10A,+12V@80mA, -12V@20mA
Board Dimension
◆
Fully PCI Bus spec. V2.1 compliant
339.5(L) x 122(W) mm
13.36"(L) x 4.8"(W)
◆ 8-layer PCB
◆
On board AGP Graphics
C&T 69000 Video display chipset
Built-in 2MB display Cache
◆ DSUB-15 VGA connector
1280x1024, 256 colors
◆
◆
On-board Fast 10/100 Base-T Ethernet
RJ-45 connector at the rear panel
◆ Support IEEE 802.3 auto-negotiation
algorithm of full-duplex and half-duplex
operation for 10Mb/s and 100Mb/s (NWAY)
◆
◆
Ultra 160 SCSI (Optional)
◆
Adaptec AIC 7892 single channel Ultra
160 SCSI controller
◆
Support M-Systems' DOC up to 288MB
ISA64 ISA-bus Driving Capability
◆
Support 64mA high driving capability for
ISA-bus slot on Backplane
On-board temperature and voltages
monitoring
◆
◆
◆
◆
0 to +55˚C
Storage Temperature
◆
-20 to +75˚C
Relative Humidity
◆
3
5% to 95%, non-condensing
Ordering Guide
ROBO-668
Advanced PICMG SBC with on-board
AGP VGA, Fast Ethernet , based on the
dual Socket 370 processor
ROBO-678
High-integrated SBC with Dual Fast Ethernet, Intel ® DVMT Display and Ultra 160 SCSI,
Based on the Intel® Pentium ® III or Celeron™ Processor
◆
◆
SupportIntel ® Pentium® III or Celeron™
processor with FSB up to 133MHz, special
space reserved for high performance
Pentium® III processor
Support PC100/133 SDRAM memory up
to 512MB (max.)
Specifications
CPU
◆
Intel® Pentium® III or Celeron™processor
for PGA 370 socket
Chipset
◆
Intel® 815E chipset
Memory
◆
On-board dual 10/100 Base-T Ethernet
◆
Integrated 3D graphic controller (DVMT,
4Mbyte display cache)
BIOS
Support two DMA33/66/100 IDE
On-Board I/O
◆
◆
◆
◆
◆
Compliant with PCI Bus spec V2.1
◆
Rev 2.0 compliant
◆
Proprietary PCI connector for expansion
(optional daughter board provided, such
as Ultra 160 SCSI or fast Ethernet)
◆
connector to fit DOM (Disk-On-Module)
and socket 370 for easy installation of
higher speed processor
◆
Support ATX function with WOL, ModemRing On, K/B & Mouse wake-up
◆
◆
Hardware monitoring & Watchdog Timer
for system protection
Two 168-pin DIMM sockets support up
to 512MB of PC-100/133 SDRAM
Award system BIOS (512KB flash ROM)
On-board Winbond W83627HF super
I/O with two USB ports*
Parallel Port
◆
Single parallel port controller with
bi-directional capability
Intel® DVMT ( Integrated 3D)
4MB display cache
1600x1200, 256 colors at refresh rates
85Hz
◆
◆
Dual Ethernet 10/100 Controller
◆
Ultra 160 SCSI (Optional)
◆
via software from 0.5 sec to 254.5 min.
◆ Can be enabled/disabled by jumper
Real Time Clock
◆
◆
Up to 7 years of battery backup protection
An external Li Battery
PS/2 Keyboard/Mouse
◆
Share PS/2 keyboard 6-pin mini-DIN on
rear bracket
Power Requirement
◆
+5V@7A, +12V@200mA, -12V@20mA
Board Dimension
338.5(L) x 122(W) mm
13.3"(L) x 4.8"(W)
◆ 6-layer PCB
◆
Adaptec AIC 7892 single channel Ultra
160 SCSI controller
◆
Support M-Systems' DOC up to 288MB
◆
Watchdog Timer
◆
and ICH2 embedded MAC controller
ISA-bus slot on Backplane
On-board temperature and voltages
monitoring
◆
Ordering Guide
ROBO-678
High-integrated SBC with dual fast
Ethernet, based on the Intel® Pentium® III
or Celeron™processor
◆
ROBO-678N
High-integrated SBC with single fast
◆
0 to +55˚C
Storage Temperature
◆
-20 to +75˚C
Relative Humidity
◆
5% to 95%, non-condensing
ROBO-678W
High-integrated SBC without fast
4
ROBO-U160
U160 SCSI Extension Module with Portwell
OmniPCI™ Connection Interface
ROBO-U160 is a daughter board for Portwell
SBCs with special PCI connection interface. (like
ROBO-668, ROBO-678) and more It provides
additional high performance SCSI Ultra 160/m
function to Single Board Computers.
This module can be factory optional item or an
additional item for customer's order later on. The
board is based on Adaptec AIC 7892 U160/m
SCSI controller. Designed in the most compact
form factor makes this board taking minimum
space upon the SBC.
All in all, ROBO-U160 is a flexible item for more
versatile factory configuration or an additional addon module for function extension.
ROBO-N100
Fast Ethernet Extension Module with
Portwell OmniPCI™ Connection Interface
ROBO-N100 is daughter board for Portwell SBCs
with special PCI connection interface. (ROBO-668,
ROBO-678) It provides additional high
performance fast Ethernet function to Single Board
Computers.
This module can be factory optional item or an
additional item for customer's order later on. The
board is based on Intel 82559 fast Ethernet
controller. It is designed in the most compact form
factor, which makes this board taking the minimum
space upon the SBC.
All in all, ROBO-N100 is a flexible item for more
versatile factory configuration or an additional addon module for function extension.
5
◆
Adaptec AIC7892 SCSI Ultra 160 SCSI controller
◆
Compact sized
◆
Proprietary PCI connector for piggy back (board to
board) connection
◆
◆
68-pin SCSI connector located at PCBA component side
◆
Support SCSI Ultra160 SCSI
◆
Single channel
◆
With 68-pin LVDS SCSI cable
◆
Dimension: 77(L) x 54(W) mm
◆
Intel® 82559
◆
Compact sized
◆
Proprietary PCI connector for piggy back
(Board to Board) connection
◆
◆
One Ethernet RJ-45 cable
◆
Support IEEE 802.3
◆
Auto-negotiation algorithm of full-duplex and halfduplex operation for 10Mb/s and 100Mb/s (NWAY)
◆
Dimension: 77(L)x52(W) mm
ROBO-698
High-integrated PICMG AIO SBC, Based on the Intel ® Pentium ® III or Celeron™ Processor
◆
Intel® 440BX AGPset supports
66/100MHz FSB for Socket 370 SBC type
Pentium® III processor up to 850MHz or
Celeron™ processors up to 700MHz
◆
On-board AGP VGA with 2MB VRAM
inside and 10/100 Base-T Ethernet
◆
On-board 4 DIMM sockets support up to
1GB of system memory with ECC function
◆
Socket 370 type processors are more
rugged than traditional Slot 1 Pentium® III
processors
Specifications
CPU
On-board VGA
Support Intel ® Socket 370 type
Pentium ® III processor up to 850MHz
◆ Support Intel ® Celeron™ processor up
to 700MHz
◆
◆
Chipset
◆
PC '98, PICMG 1.0 Rev 2.0 and PCI V2.1
industrial standard compliant
◆
One DOC socket for booting Windows
NT directly
◆
Adopt DS1687 RTC to support real
Y2K compliance
Intel® 82440BX AGPset
Memory
◆
to 1GB of SDRAM with ECC function
BIOS
◆
◆
Intel® C&T 69000 chipset with built-in
2MB SDRAM
◆ Support display mode up to resolution
1280x1024 and refresh rate 60Hz
◆ Support TFT/DSTN flat panel or CRT
display simultaneously
On-Board 10/100 Base-T Ethernet
◆
◆
I/O with two USB ports and one IrDA
infrared port
◆
System monitoring and protection
8 time intervals from 0.5 sec. to 64 sec.
by jumper setting or 255 intervals from
0.5 min. to 254.5 min. by software
programming
Power Requirement
◆
+5V@6A (typ.),+12V@140mA,
-12V@30mA
Board Dimension
338.5(L) x 122(W) mm
13.33"(L) x 4.8"(W)
◆ 6-layer PCB
◆
◆
Built with Intel® 82559 Ethernet chip to
support 10/100 Base-T connecting
capability
◆
On-Board I/O
Watchdog Timer
◆
Support M-Systems' flash memory disk
up to 288MB
◆
ISA-bus slot on backplane
ATX Power Control
◆
Modem-Ring-On and Wake-On-LAN
Ordering Guide
ROBO-698
High-integrated PICMG AIO SBC, based
on the Intel® Pentium® III or Celeron™
processor with VGA display and 10/100
Base-T Ethernet
◆
0 to +55˚C
Storage Temperature
◆
-20 to +75˚C
Connector
◆
Support Mini DIN, 5-pin header & PS/2
type keyboard connector
6
ROBO-658
World's First Fully Integrated SBC with AGP VGA Display, 10/100 Base-T Ethernet
and Ultra 160 SCSI Functions
◆
The most advanced SBC built with AGP
display, 10/100 Base-T Ethernet and
Ultra 160 SCSI
◆
Support Socket 370 type Pentium® III up
to 850MHz or Celeron™ processors up to
700MHz
◆
Support FSB up to 100MHz
◆
Support up to 512MB (max.) of SDRAM
Specifications
CPU
Support Intel ® Pentium® III processor
up to 850MHz
◆ Support Intel ® Celeron™ processor up
to 700MHz
◆
Chipset
◆
Memory
◆
◆
Intel®
◆
On-board Adaptec 7892 Ultra 160 SCSI
◆
Support 2D/3D graphics display with
4 MB SDRAM
◆
◆
◆
◆
82559 10/100 Base-T Ethernet
Ultra DMA33/66 IDE mode and ISA64
driving capability
Full-size AIO SBC with PICMG 1.0 Rev
2.0 and PCI Bus spec V2.1 compliant
connector to fit DOM (DiskOnModule)
Support ATX function with WOL,
◆
Support 4MB Video display cache
memory
◆
One DOC socket support up to 288MB of
flash memory disk
◆
Hardware monitoring and watchdog
timer for system protection
Two 168-pin DIMM sockets support up
to 512MB of SDRAM
BIOS
◆
AMI system BIOS
2D graphics display resolution up to
1600x1200
◆ Full 2D H/W acceleration, 100MHz
SDRAM interface
◆ Support 4MB SDRAM with 3D hyper
pipelined architecture
◆
◆
◆
Support two EIDE channels up to four
HDDs (Ultra DMA 33/66) 2S/1P, two USB
ports and one IrDA infrared port
◆
Software programmable (0.5, 1.5, 2.5,...
~254.5 seconds and 0.5, 1.5, 2.5, ......
~254.5 minutes)
Power Requirement
◆
+5V@6A (typ.),+12V@80mA,
-12V@20mA
Board Dimension
Adaptec AIC 7892 SCSI controller to
support Ultra 160 SCSI transfer rate up
to 160MB/s
◆
Watchdog Timer
◆
Built with Intel® 82559 Ethernet chip to
capability
On-Board Ultra 160 SCSI
On-Board I/O
288MB
Fully ATX Power Control
◆
Modem-Ring-On, K/B & mouse
wake-up, WOL and suspend to RAM
Ordering Guide
ROBO-658
338.5(L) x 122(W) mm
13.33"(L) x 4.8"(W)
◆ 6-layer PCB
Best performance PICMG AIO SBC with
VGA, Ethernet and SCSI, based on the
Pentium® III or Celeron™ processor
ROBO-658Z
◆
◆
◆
0 to +55˚C
Storage Temperature
◆
-20 to +75˚C
Connector
◆
7
Intel® i810E AGPset
ROBO-658 without SCSI function
ROBO-658W
ROBO-658Z without Ethernet function
ROBO-608
Best Cost/Performance S-370 Type PICMG SBC with PCI VGA/Panel Display
◆
◆
Intel® 440BX AGPset support 66/100MHz
FSB for Socket 370 Pentium® III processor
up to 850MHz or Celeron™ processor
up to 700MHz
Support up to 1GB(max.) of registered
SDRAM with ECC function
Specifications
CPU
Support Intel® Socket 370 type
Pentium® III processor up to 850MHz
◆ Celeron™ processor up to 700MHz
◆
Chipset
◆
◆
◆
◆
PC104 connector and high ISA-bus
driving capability
BIOS
Memory
◆
◆
Intel® 82440BX AGPset
One DOC socket supports up to 288MB
of flash memory disk
Support C&T 69000 PCI VGA display
with optional panel solution
◆
Adopt DS 1687 RTC to support real Y2K
compliance
◆
Support system overheat protection, real
H/W Y2K compliant RTC and ATX power
control
to 1GB of SDRAM with ECC function
On-Board I/O
◆
I/O with two USB ports and one IrDA
infrared port
Watchdog Timer
Eight time intervals from 0.5 sec. to
64 sec. by jumper setting
◆ 255 intervals from 0.5min to 254.5min
by software programming
On-Board PCI VGA Display
Intel® C&T 69000 high performance flat
panel/CRT HiQVideo accelerator with
2MB integrated memory
◆
◆
up to 288MB
System Monitoring/Protection
◆
Auto speeds down when CPU overheats
(OS independent & driverless)
◆
Ordering Guide
◆
Power Requirement
◆
+5V@6A (typ.),+12V@140mA,
-12V@30mA
ROBO-608
Advanced Socket 370 PICMG SBC with
PCI VGA/panel display
ROBO-608V
Advanced Socket 370 PICMG SBC
without PCI VGA/panel display
Board Dimension
LCD-KIT-RS
338.5(L) x 122(W) mm
◆ 13.33"(L) x 4.8"(W)
◆ 6-layer PCB
Optional kit for TFT SVGA LCD panel
◆
LCD-KIT-RX
Optional kit for XGA LCD panel
◆
0 to +55˚C
Storage Temperature
◆
-20 to +75˚C
Connector
◆ Support external power connector
◆ Support optional panel display port
◆
8
ROBO-598
Best Performance SBC with AGP Display & Flash Disk, Based on the Pentium ® Processor
◆
Support Intel® Pentium® III processor up
to 550MHz
◆
Equipped with 512KB cache memory
◆
Three DIMM SDRAM sockets support up
to 768MB
Specifications
CPU
Support Intel® P55C processor up to
233MHz
◆ AMD K6 processor up to 550MHz
◆ Cyrix M1/M2 processor up to 450MHz
◆
◆
Built-in ATI Rage Pro AGP display and
4/8MB VRAM for high performance
display
◆
◆
◆
◆
ALi® M1541/1543C chipset
DRAM
Support high ISA driving capability
Support ATX power control and CPU
overheat protection
Three 168-pin DIMM sockets support up
to 768MB of SDRAM
Cache Memory
◆
512KB pipeline burst SRAM, cacheable
up to 256MB
One socket for DiskOnChip supports up
to 288MB flash memory disk
BIOS
Built-in RTC and configurable WDT
(Watchdog Timer)
On-Board I/O
◆
1.8V~3.5V power regulator range
◆
USB ports support
◆
◆
AMI PCI/ISA Pentium BIOS
On-board 2xIDE/FDC/2S/1P, K/B and
mouse with two USB ports and one IrDA
infrared port
Watchdog Timer
◆
Eight segment (0.5, 1, 2, 4, 8, 16, 32,
64 seconds) hardware time-out intervals
Power Requirement
◆
+5V@10A (typ.),+12V@80mA,
-12V@30mA
Board Dimension
339.5(L) x 122(W) mm
13.37"(L) x 4.8"(W)
◆ 6-layer PCB
◆
◆
◆
0 to +55˚C
Storage Temperature
◆
9
AGP Display
◆
-20 to +75˚C
Relative Humidity
◆
5 to 95% non-condensing
Adopt ATI Rage PRO AGP display
chipset with on-board 4/8MB VRAM
◆
Chipset
◆
◆
up to 288MB
ISA-Bus Driving Capability
◆
Enhanced ISA-bus driving capability for
driving more ISA boards
◆
Ordering Guide
ROBO-598
Advanced AIO SBC with AGP display and
flash disk, based on the Pentium processor
ROBO-615
All-in-one PICMG Half-size PCI Single Board Computer
◆
Support Intel® Pentium® III or Celeron™
Processor
Specifications
CPU
◆
◆ Intel ®
◆
◆
815E chipset support FSB133
Intel® 815E Direct AGP Graphic with
4MB display cache
Maximum SDRAM memory up to 512MB
(one DIMM socket)
processor
Chipset
◆
Intel 815E with ICH2
Memory
one 168-pin DIMM socket
Support 3.3V SDRAM up to 512MB
◆ 64/128 Mbit DRAM technology
◆
◆
◆
Support 2 Ultra DMA/33/66/100 IDE
channel
◆
Half length all-in-one SBC, PCI bus
Interface (PCMCIA)
On-Board I/O
Integrated AC-97 2.0 sound blaster
compactible audio
On-board W83627HF super I/O with
two USB, one IrDA Interface
◆ Two Ultra DMA33/66/100 IDE channel
◆
On-board 10/100 Base-TX fast Ethernet
Watchdog Timer
◆
Fully support ATX function with WOL,
BIOS
◆
On-Board VGA Display
◆
Intel 815E GMCH integrated graphic
controller with 4MB display cache
On-board 10/100 Base-TX Ethernet
Intel 82801 BA (ICH2) integrated LAN
controller
◆ Intel 82562ET
◆
◆
Monitor CPU and system temperate,
opening voltage and fan status
Award BIOS with PC'98 support
Ordering Guide
◆
◆
◆
ROBO-615
Half-sized PCI SBC with VGA/LAN/
Audio based on Pentium ® III or Celeron™
processor
Support 255 intervals from 0.5sec/min to
245.5 sec/min by software programming
Power Requirement
◆
+5V@7A (typ.),+12V@200mA,
-12V@20mA
Board Dimension
◆
◆
185(L) x 122(W) mm
7.3"(L) x 4.8"(W)
◆
0 to +55˚C
Storage Temperature
◆
-20˚C to 75˚C
10
ROBO-605
World's First Half-size SBC, Based on the Celeron™ Processor
◆
Support Socket 370 processor with
PCI VGA/panel display
◆
Intel® 440BX AGPset supports 66MHz FSB
◆
Support Intel® Celeron™ processor
up to 600MHz
◆
Support Intel® Pentium® III processor
up to 850MHz
◆
All-in-one half-sized SBC with ISA-bus
◆
Support up to 256MB (max.) of 3.3V
SDRAM with ECC function
Specifications
CPU
◆
processor
Chipset
◆
Intel® 82440BX AGPset with MMX™
technology and optimized SDRAM
Memory
◆
One 168-pin DIMM socket supports up
to 256MB of SDRAM with ECC function
BIOS
◆
AMI system BIOS
On-Board I/O
◆
I/O, two USB ports and one IrDA
infrared port
◆
288MB
◆
Support C&T 69000 PCI VGA
display with optional panel solution
Watchdog Timer
Support system processor overheat
protection and real hardware Y2K
compliant RTC
Power Requirement
◆
◆
◆
Eight segment (0.5, 1, 2, 4, 8, 16, 32,
[email protected] (typ.),+12V@120mA,
-12V@20mA
Board Dimension
Intel® C&T 69000 high performance flat
panel/CRT HiQVideo accelerator with
2MB integrated memory
◆ Optional kit for SVGA/ XGA LCD panel
◆
◆
up to 288MB
◆
Auto speeds down when CPU overheats
(OS independent & driverless)
Ordering Guide
ROBO-605
Half-sized SBC with PCI VGA/panel,
based on the Pentium® III or Celeron™
processor
LCD-KIT-RS
◆
LCD-KIT-RX
◆
185(L) x 122(W) mm
7.3"(L) x 4.8"(W)
◆ 8-layer PCB
◆
0 to +55˚C
Connector
◆ Support panel display port
◆
11
ROBO-505
The Most Compact SBC with Panel/VGA Display and 10/100 Base-T Ethernet, Based
on the Pentium ® Processor
◆
Support Intel® Pentium® (P55C)
processor up to 233MHz; compatible
processor up to 333MHz
Intel ®
Specifications
CPU
Intel P55C processors up to 233MHz
◆ AMD K6 processors up to 333MHz
◆ Cyrix 6x86MX processors up to 333MHz
Intel® C&T 69000 VGA display chipset
with 2MB VRAM
◆ Support display resolution 1280x1024,
color 8bpp and refresh rate 60Hz
◆
◆
Adopt
◆
One DIMM socket supports up to 128MB
of SDRAM
Chipset
◆
On-board 512KB cache memory
Memory
◆
Adopt C&T 69000 VGA/panel display
with 2MB VRAM
◆
288MB
430TX PCI chipset
◆
◆
On-board Realtek 8139A 10/100 Base-T
Ethernet
◆
Four COM ports supported
◆
8-layer PCB
◆
ISA high driving capability and CPU
overheat protection supported
One on-board 168-pin DIMM socket
supports up to 128MB of SDRAM
512KB pipeline burst SRAM
BIOS
AMI PCI/ISA Pentium BIOS
◆
◆
up to 288MB
◆
Built with Realtek 8139 Ethernet chip to
capability
On-Board I/O
◆
◆
Intel® 82430TX PCI chipset
Cash Memory
◆
◆
I/O with two USB ports
Watchdog Timer
◆
Eight segment (0.5, 1, 2, 4, 8, 16, 32,
Power Requirement
◆
+5V@5A (typ.),+12V@60mA,
-12V@60mA
Board Dimension
Ordering Guide
ROBO-505
Advanced half-sized AIO SBC with onboard PCI VGA display and 10/100 BaseT Ethernet, based on the Pentium ®
processor
LCD-KIT-RS
◆
LCD-KIT-RX
◆
185(L) x 122(W) mm
7.3"(L) x 4.8"(W)
◆ 8-layer PCB
◆
0 to +55˚C
Storage Temperature
◆
-40 to +75˚C
Relative Humidity
◆
12
ROBO-503
NS GX1 Processor Based 3.5" Embedded SBC with CRT/LCD, Dual Ethernet and Audio
Specifications
◆
On-board NS Geode GX1 BGA CPUs
◆
NS Geode CS5530A support CRT and
18-bit TFT panels
◆
3.5" FDD SubCompact form factor
◆
Support type II compact flash disk
◆
Dual Intel® 82559ER 100 Base-TX fast
Ethernet
◆
Integrated AC-97 2.0 sound blaster
compatible audio
◆
5V only operation
◆
PC/104 expansion connector
CPU
Flat Panel / VGA Interface
On-board NS Geode GX1 200/300MHz
(available in different speeds by special
order)
◆ BGA package (Capable to support NS
Geode GXm, GXLV, and GX1)
◆
◆
Chipset
◆
NS Geode CS5530
Memory
◆
On-board one 144pin SODIMM socket
supports up to 256 MB SDRAM
NS CX5530
Shared display memory up to 4MB
◆ Simultaneously display CRT and flat
panel
◆
Dual Ethernet Interface
◆ On-board dual Intel 82559ER PCI-bus
Ethernet controllers
◆ PCI 100/10 Mbps, IEEE 802.3U
compatible
◆ For diskless system
BIOS
◆
Award 256KB FLASH BIOS
On-Board I/O
Winbond W83977F-A
Two RS-232, one Parallel port
◆ Two USB ports, one IrDA interface
Ordering Guide
◆
ROBO-503
◆
NS GX1 processor based 3.5" embedded
system based with CRT/LCD, dual
Ethernet and Audio
Watchdog Timer
◆
Generate a system reset, IRQ15 or NMI.
Software selectable time-out interval
(16 sec. ~ 7666 sec., 30 sec./step)
Power Requirement
◆
[email protected] w/GX1 200MHz
Board Dimension
◆
◆
150(L) x 100(W) mm (3.5" FDD-size)
5.9"(L) x 3.94"(W)
◆
0 to +55˚C
Storage Temperature
◆
-40 to +75˚C
Relative Humidity
◆
13
ROBO-503N
ROBO-503 with single Ethernet
PICMG Backplane
6/8/14/19 Slot PCi/ISA Bus PICMG Backplane Series
PBP-08A7
PBP-14A7
8-Slot (7xPCI) Active PICMG Backplane
PBP-14AC
PBP-19AC
PBP-19AI
PBP-06P3
PBP-08P3
PBP-08P4
6-Slot (3xPCI) PICMG Backplane
What's Active
Backplane?
To support more PCI slots
(such as 7, 12 and 18 slots),
we adopt the most popular PCI
bridge chipset from Intel to
extend PCI slots. Tr a d i t i o n a l
Backplanes only allow passive
components to be put on the
Backplanes. To meet this
demand, we put the active
chipset on the Backplanes.
Therefore, they will be no
longer
called
"Passive
Backplanes" but "Active
Backplanes".
PS. All our 20-slot Backplanes are built with dual power connectors.
14
PICMG Backplane
2/6/13/14/18/19/20 Slot PCI/ISA Bus PICMG Backplane Series
PBP-13D4
PBP-13R4
13-Slot Dual-System Backplane
PBP-14P4
PBP-18D4
PBP-19P4
18-Slot Dual-System Backplane
PBP-20Q3
PBP-06V4
PBP-02V1X
20-Slot Quad-System Backplane
Vertical 6-Slot (4xPCI) PICMG
Backplane
Vertical 2-Slot (1xPCI) PICMG
Backplane
◆
4-layer PCB with ground and power
planes to reduce noise and keep lower
impedance
◆
Frame rated PCB at 94-V0
◆
Support ATX type and 3.3V power
connector
◆
LED indicator for power signal status
◆
Reserve terminal block connector
for wiring
◆
Equipped with gold-plated connector
for better contact
◆
Adopt Tantalum capacitors to keep
circuit signal more reliable and stable
◆
No PCB bent after soldering
▲ Front View
15
▼ Rear View
PS. All our 20-slot Backplanes are built with dual power connectors.
▲ Front View
▼ Rear View
ISA Backplane
3/4/6/8/14/20 Slot ISA Bus Passive Backplane Series
4-layer PCB with ground and power planes for reducing noise
and keeping lower impedance
◆ Frame Rated PCB at 94-V0
◆ LED power indicator for +5V,+12V,-5V and -12V
◆ Heavy duty terminal block connector for industrial power supply wiring(*)
◆ Equipped with gold-plated socket for good contact
◆ Tantalum capacitor on board to maintain reliable and stable quality
◆ Easy cut for dual or multi system(*)
◆ Plug-in sockets of termination resistors for high speed signal.(*)
"*" means for most part of products
◆
PBP-06V
Horizontal 6-Slot ISA Passive Backplane
PBP-03I
PBP-04I
3-Slot ISA Passive Backplane
PBP-06I
PBP-08I
PBP-14I
PBP-20I
16
ACTI Backplane
14/18/19 Slot PCI/ISA Bus ACTI Backplane Series
ACTI-14AA
ACTI-14P4
14 -Slot (10xPCI) PICMG Backplane
3rd generation design of ACTI-Backplane
Enhanced PCB thickness to prevent bending
◆ As many as 10 PCI slots to meet the demand of today's
CTI applications
◆ More PICMG CPU slots to fit versatile SBC boards
◆ Specially designed capacitor which lowers the ESR
and prevents explosion
◆ Well-designed power ensures sufficient power is
delivered to every slot
◆
◆
ACTI-18AH
ACTI-19A7
◆ Support 17 PCI slots for new CTI application
◆
◆
17
◆ As many as 9 ISA slots capable of handling multiple
bus applications
◆
◆
* All brand names and trademarks are the properties of their respective owners.
◆ Support 11 ISA slots for the legend bus application
◆
◆
* Specifications are subject to change without notice.
EZDRV-300/200N
5.25" Compact Drive Set with Notebook Type CD-ROM, FDD & HDD
▲ EZDRV-300NCF
EZDRV-300/200N is an intelligent drive
set that can hold notebook type CDROM/FDD/HDD drive or one 3.5" FDD
drive within the standard 5.25" drive bay.
Adoptin g EZDRV-300/200N, its compact
and rugged design helps to integrate
your system more flexibly in drive space
limited applications since the newest
computers need to install more disks or
a disk array. EZDRV-200NC can hold
notebook type CD-ROM and one 3.5"
HDD. EZDRV-200NF can hold notebook
type FDD and one 3.5" HDD.
Ordering Guide
EZDRV-300CF
5.25" intelligent drive bracket with On/Off
switch and a switch protection cap
◆
All-in-one drive set can hold notebook type
CD-ROM, FDD and HDD drives within the
standard 5.25" drive bay
◆
A replaceable drive cover provides more
flexibility to install any device
◆
Reserve one LED for internal HDD
◆
The DVD-ROM version available for
special order
Specifications
General
Construction
Heavy-duty steel with plastic front cover
Disk Drive Housing
External: 1x NB CD-ROM+1xNB FDD (or 1x3.5"FDD)
Internal: 1x NB 2.5" HDD (300NCF/300CF)
Drive Cover
One NB CD-ROM front cover
One NB FDD front cover
One 3.5" FDD side cover
Indicator
LED indicators for HDD and power On/Off
Switch
One reset and one ON/OFF (only for EZDRV-300CF)
Switch Protection Cap
One ON/OFF switch protection cap
(only for EZDRV-300CF)
Standard Color
Black
Dimension
149(W) x 185(D) x 43(H) mm
5.9"(W) x 7.3"(D) x 1.7"(H)
Weight
Net: 1.5kg.(3.3lb)
Gross: 2kg.(4.8lb)
EZDRV-300NCF
Environment
5.25" compact drive bracket for notebook
type CD-ROM, FDD & HDD
0 to +55˚C
Storage Temperature
0 to +70˚C
Relative Humidity
EZDRV-200NC (CD-ROM)
5.25" intelligent drive bracket with
notebook type 24X CD-ROM
EZDRV-200NF (FDD)
5.25" compact drive bracket for notebook
type FDD
▲ EZDRV-300CF
(Slim type CD-ROM, FDD &
drive bay for 2.5" HDD)
▲ EZDRV-200NC
(Slim type CD-ROM, FDD &
drive bay for 3.5" HDD)
▲ EZDRV-200NF
(Slim type FDD & drive
bay for 3.5" HDD)
18
PRC-1173
Super Slim 19" 1U Industrial Rack-mount PC Chassis
PRC-1173 is a super slim 19" 1U rack-mount chassis
designed for space limited applications, especially in the
Internet colocation applications. Its rugged, sturdy, fullsealed steel chassis and well-concerned ventilation are
designed to withstand shocks, dust, humidity, trembling
vibration and high operating temperature in the harsh
environment.
Designed as a user-concerned product, PRC-1173 is
equipped with an optional PCI or ISA slot for expansion. It
holds one more PCI add-on card than any other legacy
design to offer the best flexibility and meet customers'
demands.
General
19" rack-mount chassis meets EIA RS-310C
industrial standard
◆
The slimmest design for Internet application
◆
Power On/Off switch on the rear side and a
reset switch inside the lockable door
◆
Four cooling fans generate positive air for
better ventilation
◆
Easily-to-install drive bracket with shockresistant cushion design
◆
Special Backplane design for one PCI or
ISA slot
The space inside a cabinet is more valuable than before
as the Internet business is booming lately. As an 1U
chassis, a super slim system for the application, PRC1173 saves much more space than the traditional 4U
chassis.
To overcome the space limitation problem, PRC-1173
integrates CD-ROM, FDD and HDD together inside the
rack. Only of 1U in height, PRC-1173 has all the
necessary functionality as a 2U or 4U system.
Speaker
Input Current
One 8Ω speaker
40A max./115V, 2A max./230V
Heavy-duty steel with aluminum front
panel
Standard Color
Efficiency
Beige, black
Min. 60%
Air Filter
Dimension
MTBF Reliability
One replaceable air filter
482.6(W) x 438(D) x 44(H) mm
19"(W) x 17.2"(D) x 1.7"(H)
Min. 50,000 hours at 25˚C (70˚F)
Construction
Cooling Fan
Safety
Four 4cm ball-bearing cooling fans
Weight
UL/TUV/CUL/CE/FCC
Disk Drive Housing
Net: 8.5kg (18.7lb)
Gross: 9.5kg (20.9lb)
Environment
Special bracket and converting board to
hold notebook type CD-ROM, FDD and
HDD together inside a 5.25" drive bay
Indicator
LED indicators for HDD and power
On/Off
Switch
One for reset and one for power On/Off
with a protection cap
Keyboard Connector
Standard 6-pin PS/2 K/B connectors at
the front panel
Backplane
Support 2-slot (1xPICMG, 1xPCI or ISA)
Power Supply
Output Voltage & Current
+5V@10A, +12V@6A,
[email protected], -12V@1A
Input Voltage
AC 95 - 135V, 180 - 265V AC Autorange
Input Frequency
47Hz - 63Hz
19
◆
Operating Temperature Range
+10 to +50˚C
Storage Temperature Range
-20 to +60˚C
Relative Humidity
PRC-1173
Super Slim 19" 1U Rack-mount PC Chassis
Features
Benefits
◆
Meet EIA RS-310C standard
◆
Easy to fit in different 19" rack-mount cabinet
◆
Replaceable air filter
◆
For easy cleaning
◆
Four 4cm ball-bearing cooling fans
◆
Better ventilation to enhance system reliability
◆
Smart design of 3 in 1 drive kit
◆
FDD, HDD & CD-ROM only take 5.25" drive space
◆
Equipped with a front door
◆
Better security control for the system
◆
One PCI or ISA expansion slot available
◆
New legacy cards adoptable
◆
Customized 150W power supply
◆
Provide sufficient power source to the system
What's New
Smart 3 in 1 drive kit
Well-designed cooling system
Flexible design for slot expansion
A smart design to integrate CD-ROM, FDD
and HDD into a 5.25" drive bay.
With four 4cm cooling fans to expire heat,
PRC-1173 gives higher reliability.
The unique design can hold the PCI or ISA
add-on card without modification needed.
Ordering Guide
Engineering Drawing
PRC-1173-02V1-15A
Super slim 19" 1U rack-mount PC
chassis with 1-slot PCI or 1-slot ISA BP
and 150W Auto-range PSU
PRC-1173-02V1X-15AX
and 150W Auto-range ATX PSU
PRC-1173-02V1X-25S
and 250W Auto-range ATX PSU
▲ PRC-1173 in beige
20
PRC-2193/PRC-2193P
Advanced 19" 2U Industrial Rack-mount PC Chassis
PRC-2193 is a 19" 2U rack-mount chassis designed for
space limited applications, especially in the Internet
environment. Its rugged, sturdy, full-sealed steel chassis
and well-concerned ventilation are designed to withstand
shocks, dust, humidity, trembling vibration and high
operating temperature in the harsh environment.
Besides, PRC-2193 can adopt either PICMG Backplane
for SBC (PRC-2193P) or ATX motherboard (PRC-2193)
to meet customers' versatile demands. With PICMG
industrial standard
◆
Rugged construction and design for harsh
industrial environment
◆
Power On/Off switch with LED indicator and
a reset switch inside the lockable door
◆
Two cooling fans generate positive air for
better ventilation
◆
Easily installed drive bracket with shockresistant cushion and well-conductive rubber
◆
Special design for 4 full-length cards
structure, you can have 4 PCI slots for expansion and 2
PCI slots for ATX motherboard structure.
as the Internet business booming. As a 2U chassis, a
compact system for the application, PRC-2193 saves half
the space than the traditional 4U chassis.
The lockable front door of PRC-2193 gives you a better
data protection for system security.
General
Dimension
MTBF Reliability
Construction
482.6(W) x 495.1(D) x 88.6(H) mm
19"(W) x 19.5"(D) x 3.5"(H)
Min. 50,000 hours at 25˚C (70˚F)
panel
Air Filter
Cooling Fan
Safety
Weight
UL/CSA/TUV/CE
Net: 10.5kg (23.1lb)
Environment
Backplane (for PRC-2193P)
Vertical 6-slot (4xPCI) Backplane
0 to +55˚C
Disk Drive Housing
Power Supply
PRC-2193P:
3 drive bays, one for 5.25", two for 3.5"
(one internal)
Two 8cm ball-bearing cooling fans
PRC-2193:
4 drive bays, one for 5.25", three for 3.5"
(two internal)
Indicator
300W ATX for PRC-2193P:
+5V@26A, +12V@11A,
+3.3V@6A, [email protected], -12V@1A
AC 95 - 130V, 190 - 254V selectable
Switch
Input Frequency
Speaker
One 8Ω speaker
Standard Color
Beige, black
0 to +70˚C
Relative Humidity
150W ATX for PRC-2193:
+5V@30A, +12V@14A,
+3.3V@7A, [email protected]
On/Off
21
◆
Input Voltage
47Hz - 63Hz
Input Current
7A max./115V, 4A max./230V
Efficiency
Min. 70%
▲ PRC-2193 in beige
PRC-2193/PRC-2193P
Features
Benefits
◆
◆
◆
◆
For easy cleaning
◆
Dual ball-bearing cooling fans
◆
◆
Replaceable back panel
◆
Easy to change to different backplane
◆
Front door equipped with a key
◆
Better security control for the system
◆
Field replaceable PS/2 power supply
◆
Easy for maintenance
What's New
Visible Drive Cover
Two fans for better ventilation
Smart PCI Raiser Cards for M/B
Switches are inside the drive cover of
PRC-2193 for better security control.
Two 8cm ball-bearing fans are equipped to
keep better ventilation inside.
PRC-2193 is built with 2 PCI raiser cards to
have two PCI slots in good reliability.
Space for Dual 3.5" HDD in PRC-2193
Well designed B/P for PRC-2193P
Space for 3.5" HDD in PRC-2193P
PRC-2193 reserves two 3.5" HDD drive
bays behind the fan sets to give higher
system performance.
PRC-2193P can hold a PBP-06V4 to offer
4 PCI slots to PICMG system.
PRC-2193P reserves one 3.5" HDD drive
bays between PSU and CD-ROM.
Ordering Guide
Engineering Drawing
PRC-2193-MX-30S
Advanced 19" 2U rack-mount chassis for
ATX M/B with 2 PCI slots and 300W
Micro ATX PSU
PRC-2193-MX-15X
Advanced 19" 2U rack-mount chassis for
ATX M/B with 2 PCI slots and 150W ATX
Micro PSU
PRC-2193P-06V4-30X
Advanced 19" 2U rack-mount chassis
with PICMG Backplane, 4 PCI slots and
300W ATX PSU
PRC-2193P-06V4-270RD
Advanced 19" 2U rack-mount chassis
with PICMG Backplane, 4 PCI slots and
270W redundant PSU
22
PRC-4164/PNC-6162
Magic 6-slot Node Chassis
▲ PRC-4164
PNC-6162 is a compact and rugged 6-slot full-size node
chassis designed for space limited applications. Its
rugged, sturdy, full-sealed and well-cooled steel chassis is
specially designed to withstand shocks, dust, humidity,
trembling vibration and high operating temperature in the
harsh environment.
General
Construction
Heavy-duty steel
Air Filter
One replaceable air filter at the front
door
Cooling Fan
One 12cm (86.5cfm) ball-bearing fan
Disk Drive Housing
External: 5.25"x1
Internal: 3.5"x1
Indicator
On/Off
Switch
Magic design for wall-mount, desk-top
and rack-mount application
◆
Rugged steel node chassis suitable for
harsh environment
◆
One built-in 12cm ball-bearing fan for
better ventilation
◆
Built-in micro-ATX type power supply
◆
Support one external 5.25" and one
internal 3.5" disk drive
◆
Optional kits to combine two PNC-6162
for the rack-mount application
With an optional built-in EZDRV, PNC-6162 can support a
notebook type CD-ROM and FDD within a 5.25" drive
bay. It helps you to install the system and application
software more easily.
Combining two PNC-6162 into a rack-mount kit with
additional software, you can have a high-availability fault
tolerant system.
Speaker
Input Voltage
One 8Ω speaker
AC 95 - 130V, 190 - 254V selectable
Standard Color
Input Frequency
Beige, Black
47Hz - 63Hz
Dimension
Input Current
PNC-6162:
220(W) x 407(D) x 160(H) mm
8.66"(W) x 16"(D) x 6.3"(H)
7A max./115V, 4A max./230V
Efficiency
Min. 70%
PRC-4164:
482(W) x 407(D) x 177(H) mm
19"(W) x 16"(D) x 7"(H)
MTBF Reliability
Weight
Safety
PNC-6162:
Net: 6.5kg (34.4lb)
Environment
Min. 50,000 hours at 25˚C (70˚F)
UL/CSA/TUV/CE
PRC-4164:
Net: 15.5kg (14.3lb)
0 to +55˚C
Mounting Bracket
Backplane
0 to +70˚C
Two brackets for vertical and horizontal
mounting
Keyboard Connector
Standard 6-pin PS/2 K/B connectors
with a cap
Keyboard Connector Cap
One cap for better security
23
◆
6-slot PICMG PISA bus Backplane
Power Supply
+5V@12A, +12V@5A,
Relative Humidity
PRC-4164/PNC-6162
Magic 6-slot Node Chassis
Features
◆
5.25" drive space for EZDRV
◆
◆
Benefits
◆
Built in with FDD and CD-ROM to install software
◆
For easy cleaning
Can be vertically or horizontally mounted
◆
Easy to fit into different space limited environment
◆
Both 6-slot ISA and PICMG BP are applicable
◆
Easy to change to different Backplanes and keep stock
◆
Adopt 150W micro-ATX PSU
◆
Save the space inside the chassis
◆
Special kit to combine dual systems into 4U space
◆
Can be formed as a fault tolerant system
What's New
Special design for the drive bay
Can be mounted in different styles
Easy-to-use control panel
Adopt notebook type device to save space.
PNC-6162's front door can be changed for
either vertical or horizontal installation.
All the switches and LEDs are located at
the front panel for direct operation.
Ordering Guide
Engineering Drawing
PNC-6162-06I-15X
6-slot full-size industrial node chassis
with 6-slot ISA Backplane and 150W
micro-ATX power supply
PNC-6162-06P3-15X
6-slot full-size industrial node chassis
with 6-slot PICMG(3 PCI) Backplane
and 150W MICRO ATX power supply
PRC-4164-06P3-15X
Two sets of PNC-6162 with rack-mount
kit, 6-slot PICMG(3 PCI) Backplane and
150W MICRO ATX power supply
▲ PNC-6162
24
IRC-305
IRC-305 is a compact and rugged 19" 2U rack-mount
chassis designed for space limited application, especially
in the telecommunication environment. Its rugged, sturdy,
full-sealed and well-cooled steel chassis is specially
designed to withstand shocks, dust, humidity, trembling
vibration and high operating temperature in the harsh
environment .
General
Construction
19" 2U rack-mount chassis meets EIA
RS-310C industrial standard
◆
5.25"x1+3.5" FDDx1+3.5" HDDx1 drive bay
◆
Replaceable air filter for easy cleaning
◆
Two 8cm ball-bearing cooling fans for
better ventilation
◆
One On/Off switch protection cap and one
touch free reset for secure access
◆
One K/B connector cap to prevent the front
K/B connector from the dust
◆
Replaceable back panel, easy to change to
different Backplanes
◆
PS/2 redundant power supply installable
◆
Field replaceable PS/2 PSU applicable,
easy for maintenance
as the Internet business blooming. A 2U chassis, which
needs just a compact system for the application, saves
half the space than the traditional 4U chassis.
With the power switch protection cap, IRC-305 can avoid
accidental reset of the system.
Speaker
Input Frequency
One 8Ω speaker
43Hz - 63Hz
panel
Standard Color
Input Current
Beige, black
8A max./115V, 4A max./230V
Air Filter
Dimension
Efficiency
482(W) x 430.6(D) x 88(H) mm
19"(W) x 17"(D) x 3.5"(H)
Min. 70%
Two 8cm (35.3cfm) ball- bearing fans
Weight
Min. 50,000 hours at 25˚C (70˚F)
Disk Drive Housing
Net: 10.5kg (23.1lb)
Safety
Cooling Fan
MTBF Reliability
UL/CSA/TUV/FCC/CE/CB
5.25"x1+3.5"x2 (one external FDD, one
external HDD)
Backplane
Indicator
Vertical 6-slot ISA Backplane
Vertical 6-slot PICMG 4xPCI Backplane
Environment
Power Supply (PW-250)
0 to +55˚C
On/Off
Switch
Keyboard Connector
Standard PS/2 K/B connector at the
front panel
One cap at the front panel
25
◆
Maximum Output
250W
+5V@25A, +12V@10A,
[email protected], [email protected]
Input Voltage
95 - 130V/190 - 254V selectable
0 to +70˚C
Relative Humidity
IRC-305
Features
Benefits
◆
◆
◆
◆
For easy cleaning
◆
ON/OFF switch protection cap & touch-free reset
◆
Avoid accidental reset of system
◆
K/B connector cap included
◆
For dust-proof for the front K/B connector
◆
Two 8cm ball-bearing cooling fans
◆
◆
◆
Easy to change to different Backplanes
◆
Field replaceable PS/2 PSU
◆
Easy maintenance
What's New
Detachable card cage
Touch-free ON/OFF & reset switch
IRC-305 is equipped with a detachable
card cage to install the boards more easily.
Two 8cm ball-bearing fan for better
ventilation.
For security reasons, a switch protection
cap is provided to prevent accidental reset.
Ordering Guide
Engineering Drawing
IRC-305-06V-25
19" 2U rack-mount chassis with
vertical 6-slot ISA Backplane and
250W power supply
IRC-305-06V4-25
vertical 6-slot PICMG (4xPCI)
Backplane and 250W PSU
IRC-305-06V4-30X
vertical 6-slot PICMG (4xPCI)
Backplane and 300W ATX PSU
26
IRC-750
19" 5U Rack-mount CTI Chassis with 6 Drive Bays
IRC-750 is an advanced 19" 5U industrial rack-mount
chassis designed specially for CTI (Computer Telephony
Integration) and fault tolerant server applications.
It's the best choice for installing RAID disk with four 5.25"
drives and also the floppy and CD-ROM drive. Its rugged,
General
Construction
panel
Air Filter
Enhanced drive bracket to hold 5.25"x4+
3.5"x1 (or 1xNB CD-ROM+1xNB FDD)
drives for RAID
◆
Two 12cm hot-swap ball-bearing cooling
fans provide better ventilation
◆
Dual card retainer positions
◆
Modularized function panel for one, dual
or quad systems
◆
Power On/Off switch protection cap and
touch free reset switch for secure access
◆
PS/2 type redundant PSU installable
◆
ATX M/B applicable, especially for bigAT size M/B
s t u r d y, full-sealed and well-cooled steel chassis is
specially designed to withstand shocks, dust, humidity,
trembling vibration and high operating temperature in the
harsh environment.
Standard Color
Input Voltage
Beige, black
95 - 132V/185 - 264V auto-range
Dimension
Input Frequency
482(W) x 495.3(D) x 221(H) mm
19"(W) x 19.5"(D) x 8.7"(H)
47Hz - 63Hz
Input Current
Weight
7A max./115V, 4A max./230V
Cooling Fan
Net: 19kg (41.8lb)
Gross: 21kg (46.2lb)
Efficiency
Two 12cm (86.5cfm) ball-bearing fans
Disk Drive Housing
5.25"x4+3.5"x1 (or 5.25"x1 NB CDROM+3.5"x1 NB FDD)
Card Retainer
Two locations for one card retainer
PSU Bracket
Replaceable module for PS/2 or PS/2
redundant PSU
Function Panel
Modularized function panel for one or
dual systems
Speaker
One 8Ω speaker
27
◆
Backplane
Min. 70%
14-slot ISA BP
14-slot PICMG 12xPCI active BP
14-slot PICMG 4xPCI BP
13-slot PICMG dual-system BP
MTBF Reliability
Power Supply (ORION-450AX)
0 to +55˚C
Maximum Output
450W
+5V@40A, +12V@17A,
[email protected], +5V&+3.3V (max. 225W)
Min. 50,000 hours at 25˚C (70˚F)
Safety
UL/CSA/TUV/FCC/CE
Environment
0 to +70˚C
Relative Humidity
IRC-750
Features
Benefits
◆
19" 5U rack-mount chassis meets EIA RS-310C standard
◆
Easy to fit in a 19" cabinet from different vendors
◆
Extremely compact size (only 49.5 cm / 19.5")
◆
Economic and easy to choose rack-mount cabinet
◆
Modularized function panel for one, dual, quad systems
◆
Easy for installing dual systems and redundant PSU
◆
ON/OFF switch protection cap and touch-free reset switch
◆
◆
Two 12cm ball-bearing hot-swap cooling fans
◆
Best ventilation to provide higher system reliability
◆
Enhanced drive bracket to hold 4x5.25" + 1x3.5" drives
◆
More flexible to integrate varied systems with RAID
◆
Two adjustable positions for hold-down card retainer
◆
Fix all the cards more flexibly and tightly
◆
Changeable modularized back panel for 14-/8-slot ISA &
BP, ATX or baby AT M/B
◆
◆
Need only one minute to change the back panel
Easy to change to different PICMG Backplanes and keep stock
Field replaceable power supply bracket for both normal PS/2
PSU and PS/2 type redundant PSU
◆
Need only 3 minutes to change defective PSU
◆
What's New
More drive space for expansion
ATX Motherboard
IRC-750 enhances the drives' bracket to
hold up to four 5.25" disk drive and one NB
type floppy and CD-ROM together. It is
easy for you to install a RAID 5 disk array
with best reliability.
IRC-750 is equipped with two ball-bearing
fans to have better ventilation and a
replaceable filter to exclude dusts.
ATX and baby AT type motherboards can
be installed inside IRC-750 just by
changing the modularized back panel.
Ordering Guide
IRC-750-14I-45X
19" 5U rack-mount chassis with 14-slot ISA
Backplane and 450W Auto-range ATX PSU
IRC-750-14P4-45X
19" 5U rack-mount chassis with 14-slot PICMG
BP and 450W Auto-range ATX PSU
IRC-750-14A7-45X
19" 5U rack-mount chassis with 14-slot 7xPCI
PICMG BP and 450W Auto-range ATX PSU
IRC-750-MX-45X
19" 5U rack-mount chassis for ATX M/B with
450W ATX PSU
▲ IRC-750 in black
28
IRC-850
IRC-850 is an advanced 19" 5U Industrial rack-mount
chassis specially for CTI (Computer Te l e p h o n y
Integration) and fault tolerant server applications. Built
with eight 5.25" drive bays (for RAID) and a 800W
(600W+200W) N+1 redundant PSU, it provides reliable
power source to the system and non-crash storage to the
application.
General
Construction
Heavy-duty steel with 8mm aluminum
front panel
Cooling Fan
8x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB
FDD) drives for RAID
◆
3 hot-swap cooling fans for better ventilation
◆
Detachable card cage for easy installation
and maintenance
◆
Dual card retainer positions
◆
or quad systems
◆
Power On/Off switch protection cap and
touch free reset switch for secure access
◆
800W (600W+200W) N+1 redundant PSU,
suitable for full-loading CTI applications
◆
Modularized back panel, 20-slot BP, babyAT & ATX M/B applicable, especially for
big-AT size M/B
Its rugged and detachable card cage is designed for easy
installation and three 12cm hot-swap cooling fan for better
ventilation. The ways to prevent high temperature from
new high-frequency CPUs and to expand the system
functionality within a limited space are important for
heavy-loading CTI & new servers to get the best
reliability.
Standard Color
Input Voltage
Beige, black
90 - 132V/180 - 264V selectable
Dimension
Input Frequency
482(W) x 673(D) x 220(H) mm
19"(W) x 26.5"(D) x 8.7"(H)
47Hz - 63Hz
Input Current
Three 12cm hot swap ball- bearing fans
Weight
15A max./115V, 8A max./230V
Disk Drive Housing
Net: 25kg (55lb)
Efficiency
5.25"x8+3.5"x1 (or NB CD-ROMx1+NB
FDDx1)
Card Retainer
PSU Bracket
redundant PSU
Function Panel
Modularized function panel for one or
dual systems
Backplane
MTBF Reliability
Environment
Power Supply (ORION-2004)
0 to +55˚C
Maximum Output
800W
Replaceable module for 20-slot BP or
ATX/Baby AT M/B
1xModule+1xAlarm+1xBeep Reset
Min. 70%
20-slot ISA BP
20-slot PICMG 4-system BP
Back Panel
Redundant PSU Signal
29
◆
+5V@60A, +12V@24A,
-12V@3A, +5V, +12V&+3.3V (max. 550W)
Min. 50,000 hours at 25˚C (70˚F)
Safety
UL/TUV/FCC/CE
0 to +70˚C
Relative Humidity
IRC-850
Features
Benefits
◆
◆
Easy to fit in a 19" cabinet from different vendors
◆
◆
Easy for installing multiple systems and redundant PSU
◆
ON/OFF switch protection cap and touch-free reset switch
◆
◆
Detachable card cage for easy installation and maintenance
◆
Convenient for system integration
◆
Two adjustable positions for hold-down card retainers
◆
◆
Three 12cm hot-swap ball-bearing cooling fans
◆
The best ventilation to provide higher system reliability
◆
Enhanced drive bracket to hold 8x5.25" + 1x3.5" drives
◆
More flexible to integrate varied systems with RAID &
CD-ROM drives
◆
Changeable modularized back panel for 20-slot ISA & PICMG
BP or ATX M/B
◆
Flexible choice and easy upgrade of architecture to satisfy
most current and future application requirements
◆
800W (600W+200W) N+1 redundant PSU for non-stop computing
◆
Suitable for full-loading CTI applications
What's New
800W N+1 (600W redundant) PSU
card cage to ease card installation. With
this cage, it is convenient to link the cables
between CPU cards and devices.
Only by changing the modularized back
panel, different 20-slot Backplanes or ATX
motherboards can be installed into IRC-850.
To meet the power requirement of CTI
system, IRC-850 is equipped with N+1
redundant PSU for non-stop operation.
Ordering Guide
IRC-850-19P4-2004
19" 5U rack-mount chassis of 8x5.25" drives with
19-slot PICMG Backplane and 600W+ 200W N+1
redundant Auto-range ATX PSU
IRC-850-19AC-2004
19" 5U rack-mount chassis of 8x5.25" drives with
19-slot PICMG (12 x PCI) Backplane and 600W+
200W N+1 redundant Auto-range ATX PSU
IRC-850-MX-2004
19" 5U rack-mount chassis of 8x5.25" drives for
ATX M/B with 600W+ 200W N+1 redundant Autorange ATX PSU
●
Special model for SPARC system board is
also ready for OEM customers
▲ Top View of IRC-850
30
IRC-860
19" 6U Rack-mount CTI Chassis
IRC-860 is an advanced 19" 6U industrial rack-mount
chassis designed specially for CTI (Computer Telephony
Integration) and fault tolerant server applications.
Its rugged & detachable card cage is designed for easy
installation and three 12cm cooling fans for better
General
Construction
panel
Air Filter
One replaceable filter for boards and
two for drives
Cooling Fan
Three 12cm (86.5cfm) ball-bearing fans
Disk Drive Housing
A type: 2x5.25"+6x3.5";
B type: 4x5.25"+2x3.5"
Card Retainer
Card Cage
Removable card cage for easy
installation
PSU Bracket
redundant PSU
Function Panel
redundant PSU
31
◆
4x5.25"+2x3.5" or 2x5.25"+6x3.5" drive
bays for RAID
◆
Three 12cm ball-bearing cooling fans
provide better ventilation for better
system reliability
◆
New rack-mount handle
◆
Detachable card cage for easy
installation and maintenance
◆
or quad systems
◆
Single PS/2 power supply & dual PS/2
400W+400W redundant PSU installable
◆
Replaceable modularized back panel for
20-/14-slot ISA/PICMG BP or ATX M/B
ventilation. Besides, its design concept to prevent high
temperature from new high-frequency CPUs and to
provide sufficient power source to the system is important
for heavy-loading CTI & new servers to get the best
reliability.
Standard Color
Input Voltage
Beige, black
95 - 132V/185 - 264V Auto-range
Dimension
Input Frequency
482(W) x 495.3(D) x 266(H) mm
19"(W) x 19.5"(D) x 10.5"(H)
47Hz - 63Hz
Input Current
Weight
7A max./115V, 4A max./230V
Net: 22kg (48.4lb)
Efficiency
Backplane
Min. 70%
MTBF Reliability
20-slot ISA Backplane
20-slot PICMG 4-system BP
19-slot PICMG (18xPCI) active BP
19-slot PICMG (12xPCI) active BP
19-slot PICMG (4xPCI) BP
Environment
0 to +55˚C
Maximum Output
450W
+5V@40A, +12V@17A,
Min. 50,000 hours at 25˚C (70˚F)
Safety
UL/CSA/TUV/FCC/CE
0 to +70˚C
Relative Humidity
IRC-860
19" 6U Rack-mount CTI Chassis
Features
Benefits
◆
◆
Easy to fit in a 19" cabinet from different venders
◆
Extremely compact size ( Only 49.5 cm / 19.5" )
◆
Economic and easy to choose rack-mount cabinet
◆
◆
Easy for installing multiple systems and redundant PSU
◆
Reserve LEDs & beep reset switches for redundant PSU
◆
Easy to keep stock and OEM project
◆
Detachable card cage for easy installation and maintenance
◆
Convenient and economic for system integration
◆
◆
The best ventilation to provide higher system reliability
◆
Two types of drives housing for 4x5.25"+2x3.5" or
2x5.25"+6x3.5" drives
◆
More flexible to integrate varied systems with RAID &
CD-ROM
◆
Replaceable modularized back panel for 20-/14-slot ISA &
PICMG BP or ATX M/B
◆
Flexible choice and easy upgrade of architecture to satisfy
most current and future application requirements
◆
Field replaceable power supply bracket for both normal
PS/2 PSU and dual PS/2 type redundant PSU
◆
Need only 3 minutes to change defective PSU
Only 30 seconds to change defective PSU module
◆
What's New
Replaceable back panel for PSUs
card cage to ease card installation. It is
convenient to link the cables between CPU
cards and devices.
For non-stop operation under CTI systems,
its modularized back panel design help to
install single or dual PS/2 400W + 400W
redundant PSU.
Replaceable back panel for different
Backplanes or ATX motherboard
By changing the modularized back panel,
different 20-slot Backplanes or ATX and
baby AT motherboards can be installed into
IRC-860.
Ordering Guide
IRC-860B-19P4-450AX
19" 6U rack-mount chassis of 4x5.25"+2x3.5" drives with 19-slot
PICMG Backplane and 450W Auto-range ATX power supply
IRC-860B-19P4-3005
PICMG Backplane and 300W redundant ATX power supply
IRC-860B-19P4-4005
Replaceable function panel
Three modular designed function panels
are available for single , dual and quad
systems display. Any OEM project is
welcome.
PICMG Backplane and 400W redundant ATX power supply
IRC-860B-MX-450AX
19" 6U rack-mount chassis of 4x5.25"+2x3.5" drives for ATX M/B
with 450W Auto-range ATX power supply
P.S.: "A" means 2x5.25"+6x3.5" drives
"B" means 4x5.25"+2x3.5" drives
32
RPC-500NE
The Most Cost-effective 19" 4U Rack-mount PC Chassis
RPC-500NE is the most cost-effective 19" 4U rack-mount
chassis designed for various kinds of servers, Computer
Telephony Integration (CTI) and telecommunication
applications.
The rugged, sturdy, full-sealed and well-cooled steel
chassis is specially designed to withstand heavy shocks,
dust, humidity, trembling vibration and extremely high
Three 5.25" and two 3.5" drive bays for
RAID 0, 1, 5 & CD-ROM
◆
Two ball-bearing cooling fans for better
ventilation
◆
Traditional rack-mount handles
◆
Dual card retainer positions and one K/B
connector cap included
◆
One modularized function panel for
single & dual systems
◆
ATX M/B applicable, especially for bigAT size M/B
◆
PS/2 redundant power supply installable
These useful enhancements to meet the newest
technology make RPC-500NE the best choice to integrate
your rack-mount systems.
We enhanced RPC-500NE with a special designed
drivers set to hold one more device such as CD-ROM
with FDD inside the chassis, it will leave more device
space for high level application.
General
Dimension
Input Current
Construction
482(W) x 450(D) x 177(H) mm
19"(W) x 17.7"(D) x 7"(H)
10A max./115V, 5A max./230V
panel
Weight
Min. 70%
Air Filter
Net: 15.5kg (34.4lb)
MTBF Reliability
One replaceable filter
Cooling Fan
One 12cm (86.5cfm) and one 8cm
(35.3cfm) ball-bearing cooling fans
Disk Drive Housing
3x5.25"+2x 3.5" (one for external FDD
and one for internal HDD) drive bays
Card Retainer
Backplane
14-slot ISA backplane
14-slot PICMG 12xPCI active Backplane
14-slot PICMG 4xPCI Backplane
13-slot PICMG dual-system Backplane
Power Supply (ORION-330A)
Maximum Output
Switch
330W
One for reset, one for power On/Off and
one for K/B lock
+5V@30A, +12V@14A,
Standard 6-pin PS/2 K/B connectors at
the front and the rear panel
95 - 132V/185 - 264V Auto-range
Input Frequency
One cap at the front panel
Standard Color
Beige, black
Efficiency
Min. 50,000 hours at 25˚C (70˚F)
Safety
UL/CSA/TUV/FCC/CE
Environment
0 to +55˚C
Keyboard Connector
33
◆
Input Voltage
47Hz - 63Hz
0 to +70˚C
Relative Humidity
RPC-500NE
Features
◆
Benefits
19" 4U Rack-mount chassis meets EIA RS-310C standard
A lockable front door with acrylic windows
◆ Power ON/OFF switch with LED indicator, reset and K/B lock
switches inside the lockable door
◆
◆
◆
Modularized function panel for one or dual systems
Reserve LED holes for redundant PSU
◆
Easy to fit in a 19" cabinet from different venders
Good for dust-proof
◆ Avoid accidental reset for better running security
◆ Running status visible
◆
◆
◆
Easy for installing dual systems and redundant PSU
Easy to keep stock and OEM project
◆
◆
◆
Two K/B DIN connectors on both front and rear panels
◆
Convenient to connect to the keyboard
◆
New K/B connector cap
◆
Good for dust-proof at the front K/B connector
◆
Two ball-bearing cooling fans
◆
Better ventilation to provide the system with higher reliability
◆
Enhanced drive bracket to hold 3x5.25"+1x3.5" (or EZ-Kit)
and 1x3.5" drives (internal)
◆
◆
More flexibility to integrate varied systems
Suitable for installing RAID and CD-ROM drive
◆
Shock-mount cushion for the drive bracket
◆
Suitable for harsh industrial environment
◆
Two adjustable positions for hold-down card retainers
◆
More flexibly and tightly to fix all the cards
◆
Changeable modularized back panel for 14-slot ISA/PICMG BP ◆ Only one minute needed to change the back panel
◆ Easy to change to different Backplanes and keep stock
or ATX M/B
◆
PS/2 PSU and PS/2 type redundant PSU
◆
◆
Good for easy cleaning
Only 3 minutes needed to change the defective PSU
Only 30 seconds to change the defective PSU module
What's New
Special designed drivers set
3x5.25"+2x3.5" drive space
ATX motherboard
Special designed drivers set to hold one
slim CD-ROM & FDD, it can leave more
drive space available for higher application.
RPC-500NE enhances the drive bracket
to hold up to three 5.25" and two 3.5"
drive bays for RAID 0, 1, 5 & CD-ROM.
ATX mother board can be installed inside
RPC-500NE just by changing the
modularized back panel.
Replaceable function panel
Replaceable panel for PSU modules
Two modular designed function panels are
available for single or dual system display
panels. Any OEM project is welcome.
RPC-500NE is designed to install different
PSU panels for PS/2 or redundant PS/2
type power supply.
RPC-500NE is equipped with two ballbearing fans to have better ventilation and
a replaceable filter to exclude dust.
Dual card retainers position
K/B connector cap
Two positions for card clamps to hold both
PCI and ISA cards more tightly.
RPC-500NE includes a PS/2 keyboard
connector cap to prevent dust.
34
RPC-500NE
Engineering Drawing
Ordering Guide
PICMG Version
RPC-500NE-14I-330A
19" 4U rack-mount chassis with 14-slot ISA Backplane and
330W Auto-range AT PSU
RPC-500NE-14P4-330A
19" 4U rack-mount chassis with 14-slot PICMG BP and 330W
Auto-range AT PSU
RPC-500NE-14A7-330A
19" 4U rack-mount chassis with 14-slot 7-PCI PICMG
Backplane and 330W Auto-range AT PSU
M/B Version
RPC-500NE-MX-30X
19" 4U rack-mount chassis for ATX M/B with 300W ATX PSU
EZ-Kit (optional)
The Kit to hold one slim type CD-ROM & FDD in a enhanced
3.5" drive bay
35
RPC-520
19" 20-slot 4U Industrial Rack-mount PC Chassis
◆
industrial standard
◆
Rugged construction suitable for harsh
◆
Lockable front door for dust-proof and
running security
◆
Power On/Off switch with LED indicator
and a reset switch inside the lockable door
◆
◆
Three cooling fans and easily installed
drive bracket with shock-resistant cushion
and well-conductive rubber
◆
Removable disk drive bracket for 5 devices
(3.5"x3, 5.25"x2)
◆
Support 20-slot ISA, 19-slot PICMG &
multiple-system backplanes
◆
Safety-approved 450W ATX PSU installed
Specifications
General
Construction
Heavy-duty steel
Air Filter
Cooling
One removable front-panel filter
19" 4U industrial chassis with 19-slot ISA
Disk Drive Housing
Indicator
Switch
Keyboard Connector
Standard Color
Dimension
RPC-520-20Q3-450AX
Weight
Ordering Guide
RPC-520-20I-450AX
19" 4U industrial chassis with 20-slot
4-system PICMG BP and 450W PSU
RPC-520-19AI-450AX
PICMG BP (18xPCI) and 450W PSU
RPC-520-19AC-450AX
PICMG BP (12xPCI) and 450W PSU
RPC-520-19P4-450AX
19" 4U industrial chassis with 20-slot ISA
BP and 450W PSU
RPC-520-18D4-450AX
dual-system PICMG BP and 450W PSU
Three cooling fans behind the fan filter panel and
one within the PSU
Five drive bays, 3.5"x3, 5.25"x2
K/B lock, reset & power On/Off
AT-connectors at both front and rear panel
Light gray
482(W) x 638(D) x 177(H) mm
19"(W) x 25.1"(D) x 7"(H)
Net: 23kg (51.1lb)
Backplane
20-slot PICMG 4-System Backplane
Maximum Output
450W
Output Voltage
&
Current
Input Voltage
Input Frequency
Input Current
Efficiency
MTBF Reliability
Safety
+5V@40A, +12V@17A,
95 - 132V/185 - 264V Auto-range
47Hz - 63Hz
7A@115V, 4A@230V
Min. 70%
Min. 50,000 hours at 25˚C (70˚F)
UL/CSA/TUV/FCC/CE
Environment
▲ Top view of RPC-520
Storage Temperature
0 to +55˚C
Relative Humidity
0 to +70˚C
36
RPC-520FT
19" 4U Rack-mount Fault Tolerant Server (FTS) Chassis
◆
19" rack-mount chassis meets EIA RS310C industrial standard
◆
Rugged construction and design for
harsh industrial environment
◆
Front swappable PS/2 type redundant PSU
◆
Design for replaceable RAID disk
◆
Six 5.25" drive bays for various RAID
configuration
◆
generate positive air to have better
ventilation
◆
Special design, multiple (4 or 2) systems
installable
General
Construction
Heavy-duty steel
◆
Safety-approved PS/2 type hot swap
redundant PSU installed
Cooling
Three ball-bearing fans between RAID devices and
the system and one within the power
Six 5.25" drive bays, one for CD-ROM drive or RAID
controller and five for RAID disks
Four reset & power On/Off
Beige, black
Specifications
Disk Drive Housing
Ordering Guide
RPC-520FT-20Q3-270RD1
19" 4U rack-mount FTS chassis with 20-slot
4-system PICMG Backplane and 500W
redundant PSU
RPC-520FT-19P4-270RD1
PICMG Backplane and 450W redundant
PSU
RPC-520FT-18D4-270RD1
19" 4U rack-mount FTS chassis with dualsystem Backplane and 500W PS/2 type
redundant PSU
Switch
Standard Color
Dimension
Weight
482(W) x 638(D) x 177(H) mm
19"(W) x 25.1"(D) x 7"(H)
Net: 23kg (51.1lb)
Backplane
20-slot PICMG 4-system Backplane
ATX M/B installable
Power Supply (BPS-270RD-1)
Maximum Output
500W
Output Voltage &
Current
Input Voltage
Input Frequency
Input Current
Efficiency
MTBF Reliability
Safety
+5V@30A, +12V@14A (max. 240W),
90 - 132V/180 - 264V Auto-range
47Hz - 63Hz
6A@115V, 3A@230V
Min. 75%
Min. 50,000 hours at 25˚C (70˚F)
UL/CUL/TUV/CE
Environment
▲ Top view of RPC-520FT
37
Storage Temperature
0 to +55˚C
0 to +70˚C
Relative Humidity
RPC-600FT
19" 4U Rack-mount Fault Tolerant Server (FTS) Chassis
◆
◆
Rugged construction suitable for harsh
◆
Power On/Off switch with light indicator
and a reset switch
◆
Nine 5.25" drive bays for various RAID
configuration
◆
generate positive air to have better
ventilation
◆
One keyboard DIN connector on the rear
panel
◆
Specially designed dual-system PICMG
backplane for installing two systems
inside
◆
Support 14-slot PICMG Backplane or
ATX motherboard
◆
Both PS/2 and PS/2 type hot-swap
redundant PSU available
Ordering Guide
Specifications
General
Construction
Heavy-duty steel
Cooling
Three ball-bearing fans between RAID devices and
the system and one within the power
Nine 5.25" drive bays, one for CD-ROM drive or RAID
controller and five for RAID disks
Reset & power On/Off
Disk DriveHousing
Switch
Indicator
Standard Color
Dimension
Weight
Eight LED indicators for HDD and power On/Off switch
Light gray, black
482(W) x 638(D) x 177(H) mm
19"(W) x 25.1"(D) x 7"(H)
Net: 23Kg.(51.1Lb)
Gross: 25Kg.(55.6Lb)
RPC-600FT-14P4-270RD
PICMG Backplane and 500W PS/2 type
redundant PSU
RPC-600FT-13D4-270RD
19" 4U rack-mount FTS chassis with dualsystem Backplane and 500W PS/2 type
redundant PSU
RPC-600FT-ATX-270RDX
19" 4U rack-mount FTS chassis with 500W
PS/2 type redundant ATX PSU for ATX M/B
Backplane
13-slot dual-system BP
14-slot PICMG BP
ATX M/B installable
Dual active systems installation:
- System 1 with 2xISA / 4xPCI
- System 2 with 2xISA / 3xPCI
Gold-plated, 4-layer Backplane
Power Supply (BPS-270RD)
Maximum Output
500W
Output Voltage &
Current
Input Voltage
Input Frequency
Input Current
Efficiency
MTBF Reliability
Safety
+5V@30A, +12V@14A, 3.3V@20A (max. 240W),
[email protected], [email protected], [email protected]
90 - 132V/180 - 264V Auto-range
47Hz - 63Hz
6A@115V, 3A@230V
Min. 75%
Min. 50,000 hours at 25˚C (70˚F)
UL/CUL/TUV/CE
Environment
Storage Temperature
0 to +55˚C
Relative Humidity
0 to +70˚C
▲ Top view of RPC-600FT
38
RPC-800
19" 4U Industrial Rack-mount PC Chassis for 14 Full-length Cards
◆
◆
Rugged construction and design for
harsh industrial environment
◆
Power On/Off switch with LED indicator
and a reset switch inside the lockable
door
◆
◆
Two cooling fans generate positive air
for better ventilation
◆
Easily-installed drive bracket with shockresistant cushion and well-conductive
rubber
General
◆
Specially designed for 14 full-length cards
Construction
Heavy-duty steel
Air Filter
Cooling
One removable front-panel filter
◆
◆
Support 14-slot ISA and various PICMG
Backplane
Many options of PSU: Safety-approved
380W Auto-range PS/2 PSU, 48VDC/DC
converter and PS/2 type redundant PSU
Ordering Guide
RPC-800-14I-33A
RPC-800 with 14-slot ISA Backplane and
330W PSU
RPC-800-14P4-33A
RPC-800 with 14-slot PICMG Backplane
(4xPCI) and 330W PSU
RPC-800-14AC-33A
RPC-800-14A7-33A
RPC-800-13D4-33A
RPC-800 with dual-system PICMG
Specifications
Disk Drive Housing
Indicator
Switch
Keyboard Connector
Standard Color
Dimension
Weight
Two cooling fans behind the fan filter panel and
one within the PSU
Two 3.5" drive bays
Reset & power On/Off
PS/2-connectors at both front and rear panel
Light gray
482(W) x 450.8(D) x 177(H) mm
19"(W) x 17.7"(D) x 7"(H)
Net: 15.5kg (34.4lb)
Backplane
14-slot PICMG (12xPCI) active Backplane
14-slot PICMG (7xPCI) active Backplane
14-slot PICMG (4xPCI) Backplane
Power Supply (ORION-330A)
Maximum Output
330W
Output Voltage &
Current
Input Voltage
Input Frequency
Input Current
Efficiency
MTBF Reliability
Safety
+5V@30A, +12V@14A,
95 - 132V/185 - 264V Auto-range
47Hz - 63Hz
10A@115V, 5A@230V
Min. 70%
Min. 50,000 hours at 25˚C (70˚F)
UL/CSA/TUV/FCC/CE
Environment
▲ Top view of RPC-800
39
Storage Temperature
0 to +55˚C
0 to +70˚C
Relative Humidity
RDA-209
19" 4U 9-drive Rack-mount Disk Array Chassis
◆
The most compact size to fit 9 disk
drives in a 19" rack-mount chassis
◆
Three horizontal drive bays for some
special devices, such as RAID
controller and CD-ROM
◆
450W redundant and standard PS/2
power supply optional
◆
Two cooling fans for better ventilation
◆
Only 4U in height, suitable for
communication node or rack server
◆
Easy for system installation and
maintenance
Specifications
General
Construction
Heavy-duty steel
Cooling
Disk Drive Housing
Standard Color
Dimension
Two 12cm internal cooling fans
Nine 5.25" drive bays
Weight
▲ RDA-209 with redundant PSU
Light gray, black
482(W) x 450(D) x 177(H) mm
19"(W) x 17.7"(D) x 7"(H)
Net: 15kg (33.3lb)
Power Supply
Maximum Output
450W
Output Voltage
&
Current
Input Voltage
Input Frequency
Input Current
Efficiency
MTBF Reliability
Safety
+5V@30A, +12V@14A,
+12V (max. 220W)
90 - 132V/180 - 264V
47Hz - 63Hz
10A@115V, 5A@230V
Min. 80%
Min. 50,000 hours at 25˚C (70˚F)
UL/CUL/TUV/CE
Environment
▲ Power supply bracket
Storage Temperature
0 to +55˚C
Relative Humidity
0 to +70˚C
Ordering Guide
RDA-209
19" rack-mount disk array chassis w/o power supply
RDA-209-3002
19" rack-mount disk array chassis with 300W redundant power supply
▲ RDA-209 with PS/2 PSU
RDA-209-38A
19" rack-mount disk array chassis with 380W PS/2 power supply
40
IRC-215N/PIK-215A
19" 1U Rack-mount Keyboard Drawer with Keyboard & Trackball
◆
Smart and compact design for rackmount application
◆
1U (1.75") in height to save space
◆
Equipped with 101-key keyboard and
trackball
Ordering Guide
IRC-215N
19" 1U industrial keyboard drawer with
101-key keyboard & trackball
PIK-215A
101-key keyboard & trackball
IRC-215N is the slimmest keyboard drawer which houses a compact
IBM-PC XT/AT compatible 101-key keyboard and a trackball for Windows
application. It has a slide bar for holding the keyboard and trackball cable
for smooth operation.
Engineering Drawing
Specifications
Keyboard
No. of Keys
101
Keys Travel
LED
MTBF
Interface
Safety
4mm
Num. Cap. Scroll Lock
10 million strokes
AT or PS/2
UL, CE
Trackball
No. of Keys
3
Compatibility
Interface
Safety
Microsoft
DB9 or PS/2
UL, CE
General
Construction
Heavy-duty steel
Color
Drawer Travel
Dimension
Beige, black
11"
Weight
Storage Temperature
Relative Humidity
▲ PIK-215A
41
482.8(W) x 333(D) x 44(H) mm
19"(W) x 13.1"(D) x 1.7"(H)
Net: 5.5kg (12.2lb)
0 to +55˚C / 20-90%RH
0 to +70˚C / 5-95%RH
IRC-210N/PIK-210A
19" 1U Rack-mount Keyboard Drawer with 101-Key Keyboard
◆
Smart and compact design for rackmount application
◆
1U (1.75") in height to save space
◆
Equipped with 101-key keyboard
Ordering Guide
IRC-210N
101-key keyboard
PIK-210A
101-key keyboard
IRC-210N, a slim keyboard drawer which houses a specially compact
IBM-PC XT/AT compatible 101-key keyboard, is nearly the same as IRK215 except trackball.
Engineering Drawing
Specifications
Keyboard
No. of Keys
101
Keys Travel
LED
MTBF
Interface
Safety
4mm
Num. Cap. Scroll Lock
>10 million strokes
AT or PS/2
UL, CE
General
Construction
Heavy-duty steel
Color
Drawer Travel
Dimension
Beige, black
11"
Storage Temperature
482.8(W) x 333(D) x 44(H) mm
19"(W) x 13.1"(D) x 1.7"(H)
Net: 4.2kg (9.3lb)
0 to +55˚C / 20-90%RH
0 to +70˚C / 5-95%RH
Relative Humidity
Weight
▲ PIK-210A
42
IRC-308
8-slot Full-size Industrial Node Chassis (Shoe-box)
IRC-308 is a compact and rugged 8-slot full-size node chassis
designed for space limited application. Its rugged, sturdy, full-sealed
and well-cooled steel chassis is specially designed to withstand shocks,
dust, humidity, trembling vibration and extremely operating temperature
in the harsh environments.
General
Construction
Heavy-duty steel
Air Filter
door
5.25" drive space for CD-ROM or mobile
rack, easy to install software and mirror
disk (RAID1)
◆
◆
Fan direction changeable
◆
Can be vertically or horizontally
mounted, easy to fit into space limited
environment
◆
One 12cm ball-bearing cooling fan for
better ventilation
◆
Two adjustable positions for hold-down
card retainers provide higher flexibility to
fix all the cards tightly
◆
Both 8-slot ISA and PICMG BP applicable,
easy to change to different Backplanes
◆
Field replaceable power supply bracket
for both normal PS/2 and PS/2 type
redundant PSU, easy for defective PSU
changing
Input Voltage
95 - 130V/190 - 254V selectable
Speaker
Input Frequency
One 8Ω speaker
43Hz - 63Hz
Standard Color
Input Current
Beige, black
8A max./115V, 4A max./230V
Cooling Fan
Dimension
Efficiency
330(W) x 408(D) x 172(H) mm
13"(W) x 16.1"(D) x 6.8"(H)
Min. 70%
Weight
Min. 50,000 hours at 25˚C (70˚F)
Net: 9kg (19.8lb)
Gross: 10kg (22lb)
Safety
Disk Drive Housing
External: 5.25"x2+3.5" FDDx1
Internal: 3.5" HDDx1
Indicator
On/Off
Switch
Mounting Bracket
MTBF Reliability
Backplane
Maximum Output
mounting
250W
Keyboard Connector
Standard 5-pin AT K/B connector with a
cap
43
◆
+5V@25A, +12V@10A,
Environment
0 to +55˚C
0 to +70˚C
Relative Humidity
IRC-308
8-slot Full-sized Industrial Node Chassis (Shoe-box)
Features
Benefits
◆
5.25" drive space for CD-ROM or mobile rack
◆
◆
◆
For easy cleaning
◆
◆
◆
◆
◆
Both 8-slot ISA and PICMG Backplane are applicable
◆
Easy to change to different Backplane and keep stock
◆
◆
Need only 30 seconds to change the defective PSU module
◆
Easy to install software and mirror disk (RAID 1)
What's New
Redundant power supply
Dual card retainers
With a new bracket, a PS/2 or redundant
PSU can be installed to enhance security.
IRC-308's front door can be changed for
It has two positions for card clamps to hold
both PCI and ISA cards tightly.
Ordering Guide
Engineering Drawing
IRC-308-08I-25
8-slot full-size industrial node
chassis with 8-slot ISA Backplane
and 250W power supply
IRC-308-08P4-25
chassis with 4xPCI Backplane and
250W power supply
IRC-308-08P4-30X
300W ATX power supply
IRC-308-08P3-25
250W power supply
44
IRC-306
6-slot Full-size Industrial Node Chassis (Shoe-box)
IRC-306 is a compact and rugged 6-slot full-size node chassis
designed for space limited applications. Its rugged, sturdy, fullsealed and well-cooled steel chassis is specially designed to
withstand shocks, dust, humidity, trembling vibration and high
General
Construction
Heavy-duty steel
Air Filter
One external 5.25" and 3.5" and one
internal HDD drive bays
◆
◆
Can be vertically or horizontally mounted,
easy to fit into space limited environment
◆
One 12cm ball-bearing cooling fan for
better ventilation
◆
◆
Two adjustable positions for hold-down
card retainers provide better protection
from vibration
◆
Both 6-slot ISA and PICMG BP applicable,
easy to change to different Backplanes
◆
Field replaceable power supply bracket for
both normal PS/2 and PS/2 type redundant
PSU, easy for defective PSU changing
Input Voltage
95 - 130V/190 - 254V selectable
Speaker
Input Frequency
One 8Ω speaker
43Hz - 63Hz
door
Standard Color
Input Current
Beige
8A max./115V, 4A max./230V
Cooling Fan
Dimension
Efficiency
260(W) x 408(D) x 172(H) mm
10.2"(W) x 16.1"(D) x 6.8"(H)
Min. 70%
Weight
Min. 50,000 hours at 25˚C (70˚F)
Net: 8.5Kg.(18.7 lb)
Gross: 9.5Kg.(20.9 lb)
Safety
Disk Drive Housing
External: 5.25"x1+3.5" FDDx1
Internal: 3.5" HDDx1
Indicator
On/Off
Switch
Mounting Bracket
MTBF Reliability
Backplane
Maximum Output
mounting
250W
Keyboard Connector
Standard 5-pin AT K/B connector with a
cap
45
◆
+5V@25A, +12V@10A,
Environment
0 to +55˚C
0 to +70˚C
Relative Humidity
IRC-306
6-slot Full-sized Industrial Node Chassis (Shoe-box)
Features
Benefits
◆
5.25" drive space for CD-ROM or mobile rack
◆
Easy to install software
◆
◆
For easy cleaning
◆
◆
◆
◆
◆
Both 6-slot ISA and PICMG Backplane are applicable
◆
Easy to change to different Backplane and keep stock
◆
◆
Need only 30 seconds to change the defective PSU module
◆
What's New
Redundant power supply
Dual card retainers
With a new bracket, a PS/2 or redundant
PSU can be installed to enhance reliability.
IRC-306's front door can be changed for
It has two positions for card clamps to hold
both PCI and ISA cards tightly.
Ordering Guide
Engineering Drawing
IRC-306-06I-25
chassis with 6-slot ISA Backplane
and 250W power supply
IRC-306-06P4-25
chassis with 6-slot 4xPCI
IRC-306-06P3-25
chassis with 6-slot 3xPCI
46
IRC-306S
6-slot Industrial Node Chassis with NB CD-ROM, FDD and HDD
IRC-306S is a compact and rugged 6-slot node chassis for industrial
controller in the space limited application. Since CD-ROM is the most
common device for installing s/w, it is equipped with a notebook PC CDROM drive for easy installation of the necessary OS or application s/w.
Its rugged, sturdy, full-sealed and well-cooled steel chassis is designed
to withstand heavy shock, dust, humidity, vibration and high temperature
in the harsh environments.
General
Construction
Heavy-duty steel
Support one 5.25" drive bay for
EZDRV-300 or other kind of device
◆
environment
◆
◆
◆
One On/Off switch protection cap and
one touch free reset for secure access
◆
Equipped with one K/B connector cap to
prevent the front K/B connector from the
dust
◆
One 12cm ball-bearing cooling fan
provides better ventilation to enhance
system reliability
◆
Built-in 130W power supply
Speaker
Input Frequency
One 8Ω speaker
43Hz - 63Hz
Standard Color
Input Current
Black, beige
8A max./115V, 4A max./230V
Dimension
Efficiency
172(W) x 256.7(D) x 194(H) mm
6.8"(W) x 10.1"(D) x 7.6"(H)
Min. 70%
Weight
Min. 50,000 hours at 25˚C (70˚F)
Disk Drive Housing
Net: 5.5kg (12.1lb)
Gross: 6kg (13.2lb)
Safety
Air Filter
door
Cooling Fan
External: NB CD-ROMx1+NB FDDx1
Internal: NB 2.5" FDDx1
Indicator
On/Off
Switch
Keyboard Connector
Standard PS/2 K/B connector at the rear
panel
One cap at the rear panel
47
◆
MTBF Reliability
UL/CSA/TUV/CE
Backplane
6-slot PICMG PISA bus Backplane
Environment
Power Supply (ORION-130ATX)
0 to +55˚C
Maximum Output
135W
+5V@15A, +12V@6A, +3.3V@6A
[email protected], -12V@1A, +5VSB@1A
Input Voltage
90 - 132V/180 - 264V selectable
0 to +70˚C
Relative Humidity
IRC-306S
6-slot Industrial Node Chassis with NB CD-ROM, FDD and HDD
Features
Benefits
◆
◆
ON/OFF switch protection cap
◆
◆
◆
◆
◆
◆
For easy cleaning
What's New
The rear of IRC-306S
IRC-306S allows for vertical and horizontal
installation.
For security concerns, a switch protection
IRC-306S has well-cooling design to expire
the heat from the system.
Ordering Guide
Engineering Drawing
IRC-306S-06I-135
6-slot node chassis with 6-slot ISA
Backplane and 135W power
supply
IRC-306S-06P4-135
6-slot node chassis with 6-slot
PISA bus Backplane and 135W
PSU for PCI/ISA application
48
IRC-304S
Advanced 4-slot Industrial Node Chassis with NB CD-ROM, FDD and HDD
IRC-304S is a compact and rugged 4-slot node chassis for industrial
controller in the space limited application. Since CD-ROM is the most
common device for installing s/w, it is equipped with a notebook PC type
CD-ROM drive for easy installation of the necessary OS or application
software.
◆
Support one CD-ROM, one FDD and
one HDD (all NB type) drive bays
◆
environment
◆
◆
◆
One On/Off switch protection cap and
one touch free reset for secure access
◆
Equipped with one K/B connector cap to
prevent the front K/B connector from the
dust
◆
provides better ventilation to enhance
system reliability
◆
Built-in SNP-9F40 65W power supply
Its rugged, sturdy, full-sealed and well-cooled steel chassis is designed
to withstand shock, dust, humidity, vibration and high temperature in the
harsh environment.
General
Construction
Heavy-duty steel
Input Frequency
One 8Ω speaker
43Hz - 63Hz
Standard Color
Input Current
Industrial dark gray
1.5A max./115V, 0.8A max./230V
Dimension
Efficiency
172(W) x 256.7(D) x 172(H) mm
6.8"(W) x 10.1"(D) x 6.8"(H)
Min. 70%
Weight
Min. 50,000 hours at 25˚C (70˚F)
Disk Drive Housing
Net: 5kg (11lb)
Air Filter
door
Cooling Fan
External: NB CD-ROMx1+NB FDDx1
Internal: NB 2.5" FDDx1+3.5" HDD
Indicator
LED indicators for HDD
Switch
Keyboard Connector
Standard 5-pin AT K/B connector at the
rear panel
One cap at the rear panel
49
Speaker
MTBF Reliability
Safety
CSA/TUV/NRTL/C
Backplane
Power Supply (SNP-9F40)
Maximum Output
65W
+5V@4A, +12V@3A,
Input Voltage
AC 90 - 264V
Environment
0 to +55˚C
0 to +70˚C
Relative Humidity
IRC-304S
Advanced 4-slot Industrial Node Chassis with NB CD-ROM, FDD and HDD
Features
Benefits
◆
◆
◆
ON/OFF switch protection cap
◆
For easy cleaning
◆
◆
◆
◆
What's New
12cm fan for better ventilation
Top view of IRC-304S
One 12cm ball-bearing fan is equipped to
keep well-cooled air inside.
For security reasons, a switch protection
It is a magic to install so many components
within such a compact system.
Ordering Guide
Engineering Drawing
IRC-304S-04I-65
4-slot node chassis with 4-slot ISA
Backplane and 65W power supply
▲ Notebook type device for IRC-304S
50
IRC-404S
Compact 4-slot Industrial Node Chassis
IRC-404S is a compact and rugged 4-slot
node chassis to be the industrial controller in
the space limited application. It is designed
for the diskless operation which needs the
best reliability and bears no peripherals'
errors.
Its rugged, sturdy, full-sealed and well-cooled
steel chassis is designed to withstand shock,
dust, humidity, vibration and high
temperature in the harsh environment.
General
Dimension
Input Current
Construction
110(W) x 218(D) x 195(H) mm
4.3"(W) x 8.6"(D) x 7.7"(H)
1.5A max./115V, 0.8A max./230V
Weight
Min. 70%
Heavy-duty steel
Air Filter
One replaceable filter inside the chassis
Cooling Fan
No fans needed
Disk Drive Housing
Net: 2.35kg (5.2lb)
MTBF Reliability
Min. 200,000 hours at 25˚C (70˚F)
Backplane
Safety
CSA/TUV/UL/CE
One internal 2.5" HDD
Power Supply (SNP-9F40)
Indicator
Maximum Output
On/Off
Switch
Standard Color
Industrial dark gray
Efficiency
Environment
65W
0 to +55˚C
+5V@4A, +12V@3A,
Input Voltage
Relative Humidity
AC 90 - 264V
0 to +70˚C
Input Frequency
43Hz - 63Hz
Engineering Drawing
▲ Rear Side of IRC-404S
51
PRA-2182
19" 2U Rack-mount Keyboard Drawer with 12.1" TFT Display
PRA-2182 is the industrial drawer that offers many unique
advantages over the traditional devices. This industrial
monitor keyboard features a large-size monitor in a
compact 2U unit, occupying only a fraction of the space of
traditional monitor and keyboard units. The spectacular
display of an 12.1" LCD screen coupled with a full-size
keyboard with built-in pointing device is now available in
only 2U.
Designed for 19" rack-mount cabinets in a convenient
drawer form, PRA-2182 is the most ideal solution to
Construction
Front access right lock for system
security
108-key keyboard with integrated
GildePoint touch pad. Key pad.
Flat Panel
- 12.1" TFT/DSTN 800x600
- Built-in OSD (on screen display) controls
- Automatic flat panel shut-off when
monitor is in the closed position
- 0 - 105º monitor open angle
Connection
Standard AT keyboard, PS/2 mouse and
VGA connectors
Keyboard Drawer
- Built-in side railing for instant installation
- Three pull-out stages: drawer locks at
3rd stage (release tabs on side railing)
- Total drawer travel distance: 14"
◆
Power of a high-performance monitor in
a compactly integrated 2U enclosure
◆
Anti-glare tempered glass for added
protection to LCD screen
◆
Automatic LCD shut off when not in use
without shutting down the main system
◆
Simple and polished design will enhance
the value of the end-product
◆
12.1" TFT LCD display, high luminance
◆
Rugged construction for harsh
environment operation
The monitor keyboard unit has a built-in slide rail and
mounts easily onto any 19" cabinet. Simply pull the unit
out to access the system. When closed, the unit lock will
limit system access and thereby provide certain degree of
security.
Security Lock
Keyboard/Mouse
Meet EIA-RS-310C and IEC-297-3
specifications
maximize usable cabinet space. With built-in analog-todigital conversion board, the PRA-2182 can be connected
to any standard VGA graphics card for immediate screen
display.
General
Heavy-duty steel
◆
Power Supply
Environment
0 to +50˚C
26W 100/240V 47-63 Hz auto-switching
power supply
Option
Ordering Guide
0 to +70˚C
Touch screen
PRA-2182
Handle
Front panel stainless steel handle
19" 2U rack-mount keyboard drawer
with 12.1" TFT display
Standard Color
Black, beige
(custom colors available for OEM/ODM)
Dimension
482(W) x 446.4(D) x 87.9(H) mm
19"(W) x 17.6"(D) x 3.5"(H)
Weight
Net: 15kg (33lb)
Safety
CE/FCC class B certification
▲ PRA-2182 in black
52
ORION-2004
600W+200W (N+1) Redundant Switching Power Supply
Features
Values / Benefits
Apply true load-sharing N+1 design
High reliability & redundancy
Four 200W Hot-swap redundant modules
Alarm beeping and LED indicator
Provide 1.5A for stand-by +5V
+3.3V on each module
+5V,+12V,+3.3V o/p have OVP design
2-Layer, FR-4, 94-V0 PCB
Silver plated Germany DIN connector
Ball bearing NMB fan
Use 15A/400V power transistor
2 pcs of 30A/40V parallel for +5V diode
20A/200V (Fuji D92-02) for +12V diode
Varistor installed
Total 800W for heavy loading system
Meet ATX2.01 Spec. for newest ATX M/B
Real redundant design for +3.3V output
No worry for any DC o/p damage
Good reliability for industrial grade PSU
Extra reliability for high current situation
Good reliability
High current tolerance with longer durability
Durability twice better than normal PSU
Absorb more inrush spike
Remote sense installed
Output power connector
Auto-adjust M/B loading & o/p voltage
One ATX & one P8P9 connector
ORION-2004 is a "state-of-the-art" design to the
traditional power supply market. It is smart not only in
the PSU circuit design, but also in the mechanical
design. Besides, it is easy to hot swap the modules.
Together with its compactness, it brings a lot of benefits
to customers in non-stop computing environment.
The "N+1" load sharing technology is the trend for highend switching power module. With this feature,
customers can expand the power on their demand. It
surely meets the growing demand for the mission critical
application.
Specifications
◆
Input
Voltage
Frequency
Current
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆
DC Output
◆
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
◆
Over Voltage Protection
Over Load Protection
MTBF
◆ EMI & Safety Approval
◆
◆
◆
Temperature/Humidity
◆
Dimension (WxDxH)
90V ~ 132V, 180 ~ 264V selectable
47 ~ 63 Hz
15A@115V, 8A@230V
+5V
+3.3V +12V -5V
-12V
60A
48A
20A
1A
1A
3A
0.3A 0.5A 0A
0A
580W
5W
12W
+/-5% +/-4% +/-5% +/-10% +/-10%
+/-5% +/-4% +/-5% +/-10% +/-10%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 65%
16ms. at full load
1.5KVRMS, 60sec. from i/p to ground
3.0KVRMS, 60sec. from i/p to o/p
+5V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V
+12V: 13.6V ~ 15.6V
Total o/p 110% ~ 130%
> 100,000hrs
TUV, UL, CE, FCC
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
100x210x214.1 mm / 4"x8.3"x8.4"
Engineering Drawing
Ordering Guide
●
600W+200W (N+1) redundant PSU (total 800W output),
with one ATX & one P8P9 output connectors
●
ORION-2004-S (for SunSPARC AXmp)
with one 24-pin ATX and one 20-pin ATX connectors
●
53
ORION-2004
PFC-Kit-2004 (Optional)
Passive-kit for ORION-2004
ORION-2003
400W+200W (N+1) Redundant Switching Power Supply
Features
Values / Benefits
Three 200W hot-swap redundant modules
Silver plated German DIN connector
Ball-bearing NMB fan
Extra reliability for high current situation
Good reliability
High current tolerance with longer durability
Varistor installed
Output power connector
One ATX & one P8P9 connector
ORION-2003 is a "state-of-the-art" design to the
traditional power supply market. It is smart not only in
the PSU circuit design, but also in the mechanical
design. Besides, it is easy to hot swap the modules.
Together with its compactness, it brings a lot of benefits
to customers in non-stop computing environment.
The "N+1" load sharing technology is the trend for highend switching power module. With this feature,
customers can expand the power on their demand. It
surely meets the growing demand for the mission critical
application.
Specifications
◆
Input
Voltage
Frequency
Current
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆
DC Output
◆
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
◆
MTBF
◆ EMI & Safety Approval
◆
◆
◆
◆
Dimension (WxDxH)
90V ~ 132V, 180 ~ 264V selectable
47 ~ 63 Hz
9A@115V, 5A@230V
+5V
+3.3V +12V -5V
-12V
40A
32A
14A
1A
1A
3A
0.3A 0.5A 0A
0A
380W
5W
12W
+/-5% +/-4% +/-5% +/-10% +/-10%
+/-5% +/-4% +/-5% +/-10% +/-10%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 65%
20ms. at full load
+5V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V
+12V: 13.6V ~ 15.6V
Total o/p 110% ~ 130%
> 100,000hrs
TUV, UL, CE, FCC
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
100x210x170 mm / 4"x8.3"x6.7"
Engineering Drawing
Ordering Guide
●
ORION-2003
with one ATX & one P8P9 output connectors
54
ORION-4005/3005
400W+400W/300W+300W Horizontal Type ATX Redundant Power Supply
ORION-4005 is a horizontal type dual
PS/2 redundant power supply with
ATX (Ve r. 2.01) output for "Mission
Critical" applications.
The power supply is designed with
separate AC inputs to get zero down
time for real-time disaster recovery
and the remote DC sense to have the
best reliability for the non-stop
computing systems.
Ordering Guide
●
ORION-4005
400W+400W dual PS/2 type ATX redundant
power supply
●
ORION-3005
Features
Values / Benefits
Two 400W hot-swap redundant modules
Pass the 72 hrs 400W load burn-in test
Provide 1A for stand-by +5V
Each DC o/p voltage has OCP design
Real & full 400W redundant PSU
Meet ATX2.01 for newest ATX M/B
Dual AC input
No failure on each DC o/p short test
AC input redundancy for safety
Ball-bearing NMB fan
Use 3A components for -5V / -12V
Good reliability
Suitable for CTI systems
Varistor installed
High current tolerance w/ longer durability
300W+300W dual PS/2 type ATX redundant
power supply
Specifications
◆
55
Input
Voltage
Frequency
Current
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆
DC Output
◆
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
◆
◆
◆
MTBF
◆
◆
Dimension (WxDxH)
AC 90 ~ 132V, 180 ~ 264V selectable
47 ~ 63 Hz
9A@115V, 5A@230V
+5V
+12V +3.3V -5V
-12V
50A
15A
30A
1.5A 1.5A
3A
1A
0A
0A
0A
370W
7.5W 18W
+/-5% +/-5% +/-5% +/-5% +/-5%
+/-5% +/-5% +/-5% +/-10% +/-5%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 70%
20ms. at full load
+5V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V
+12V:13.6V ~ 15.6V
Total o/p 110% ~ 130%
> 100,000hrs
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : 0 ~ 70˚C, 5 ~ 95%RH
353x201x105 mm / 13.9"x7.9"x4.1"
Engineering Drawing
ORION-3002
Advanced 300W PS/2 Type Hot-Swap Redundant Power Supply
PS/2 type PSU is the default standard for all chassis
manufacturers. Keeping the same size makes it easy
for the PSU suppliers to find the market. As the
computing power is enhanced, the demand for
higher power output comes. It is easy to increase the
power output by extending its size, but not easy to
have redundant capability and keep it in an exact
PS/2 size at the same time.
ORION-3002 shows the technology to meet
customers' requirements without sacrificing any
advantages of traditional PS/2 power supplies. With
the "Dual Redundant" design, the total power output
of ORION-3002 can be more than 600W and has
300W output when any module fails.
Ordering Guide
●
ORION-3002-X
Advanced 300W PS/2 type hot-swap
redundant power supply with ATX output
●
ORION-3002-T
redundant power supply with AT output
●
ORION-3002-R
redundant power supply for RAID
Features
Values / Benefits
Two 300W hot-swap redundant modules
Provide 2A for stand-by +5V
Ball-bearing fan
No worry for any DC o/p to damage
Good reliability
PS: Front loading type power supply available
Specifications
◆
Input
◆
DC Output
◆
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
Voltage
Frequency
Current
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆ MTBF
◆ Safety Approval
◆
◆
◆
◆
Dimension (WxDxH)
Engineering Drawing
AC 90 ~ 132V, 180 ~ 264V Auto-range
47 ~ 63Hz
6A@115V, 3A@230V
+5V
+3.3V +12V -5V
-12V
36A
16A
14A
0.5A 1A
3A
1A
1A
0A
0A
280W
2.5W 6W
+/-5% +/-5% +/-5% +/-10% +/-10%
+/-5% +/-5% +/-5% +/-10% +/-10%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 65%
20ms. at full load
+5V: 5.6V ~ 6.5V/+12V: 13.6V ~ 15.6V
Total o/p 120% ~ 140%
> 100,000hrs
UL, TUV, CE, FCC
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
86x175x150 mm / 3.4"x6.9"x5.9"
56
ORION-2253
Advanced 450W+225W (N+1) PS/2 Type Hot-Swap Redundant Power Supply
PS/2 type PSU is the default standard for all chassis
manufacturers. Keeping the same size makes it easy
for the PSU suppliers to find the market. As the
computing power is enhanced, the demand for higher
power output comes. It is easy to increase the power
output by extending its size, but not easy to have
redundant capability and keep it in an exact PS/2 size
at the same time.
ORION-2253 shows the technology to meet
customers' requirements without sacrificing any
advantages of traditional PS/2 power supplies. With
the "N+1" design, the total power output of ORION2253 can be more than 675W and has 450W output
when any module fails.
Ordering Guide
●
ORION-2253
Advanced 450W+225W (N+1) PS/2 type
hot-swap redundant power supply with ATX
output
Features
Values / Benefits
Three 225W hot-swap redundant modules
Ball-bearing fan
Good reliability
Varistor installed
Specifications
◆
Input
Voltage
Frequency
Current
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆
DC Output
◆
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
◆
Over Power Protection
MTBF
◆ Safety Approval
◆
◆
57
◆
◆
Dimension (WxDxH)
47 ~ 63 Hz
12A@115V, 6A@230V
+5V
+3.3V +12V -5V
-12V
45A
25A
25A
1A
2A
3A
0A
1A
0A
0A
410W
5W
24W
+/-5% +/-6% +/-5% +/-10% +/-10%
+/-5% +/-6% +/-5% +/-10% +/-10%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 75%
16ms. at full load
+5V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V
+12V: 13.6V ~ 15.6V
Total o/p power over 120%
> 167,000hrs
UL, TUV, CE, FCC
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
86x181x150 mm / 3.4"x7.1"x5.9"
Engineering Drawing
ORION-2302
230W for 2U Slim Type ATX Hot-Swap Redundant Power Supply
ORION-2302 is a compact redundant power
supply for "Mission Critical" applications. As
"High Availability" becomes a common
requirement, now the redundant power supply is
part of non-stop computers. With its compact
size, ORION-2302 can be easily applied to get
great added value of "High Availability" without
changing any mechanism or redesigning
systems.
Specifications
◆
◆
Input
DC Output
Voltage
Frequency
Current
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
◆
◆
Over Power Protection
MTBF
◆ Safety Approval
◆
◆
◆
◆
Dimension (WxDxH)
47 ~ 63 Hz
4A@115V, 2A@230V
+5V
+12V +3.3V -5V
-12V
25A
13A
15A
0.5A 1A
3A
1A
0A
0A
0A
210W
14.5W
+/-5% +/-6% +/-5% +/-10% +/-10%
+/-5% +/-6% +/-5% +/-10% +/-10%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 75% at full load
16ms. at full load
+5V: 5.6V ~ 6.5V/+12V: 12.6V ~ 15.6V
+3.3V: 3.7V ~ 4.5V
Total o/p 120%
> 176,000hrs
UL, CUL, TUV, CE
Operating : 0 ~50˚C, 20 ~90%RH
Storage : -20 ~60˚C, 5 ~95%RH
86x181x109 mm / 3.4"x7.1"x4.3"
Features
The most compact hot swap redundant PSU to fit into a
limited space, suitable for 2U chassis
Two 230W hot-swap redundant modules provide 460W output
for the new computers high-frequency CPUs
Provide 1.5A for standby +5V
High reliable ball bearing sensitive fan
Equipped with 4-ear brackets for fixing the PSU easily and
flexibly
Alarm beeping and LED indicator of defective module for
field replacement directly
Enhanced swappable fan to get high security for 100%
mission critical application
Engineering Drawing
Ordering Guide
●
ORION-2302
230W for 2U slim type ATX redundant PSU
58
ORION-250S
Slim Type of 250W ATX Power Supply
Specifications
Voltage
Frequency 47 ~ 63 Hz
Current
6A@115V, 3A@230V
+5V
+12V +3.3V -12V -5V
◆ DC Output
Max. Load 30A
10A
15A
0.5A
0.5A
Min. Load 3A
1A
1A
0A
0A
◆ Efficiency
>75%
◆ Hold up Time
16ms. at full load
1.5K VRMS, 60sec. from i/p to ground
◆ Hi-Pot Test
3.0K VRMS, 60sec. from i/p to o/p
◆ Over Voltage Protection +5V: 5.15V ~ 6.45V/+12V: 12.6V ~ 15.6V
◆ Over Load Protection
When over 120%
Operating : 10 ~ 50˚C
◆ Temperature/Humidity
Storage : -20 ~ 60˚C
◆ Safety Approval
UL, TUV, CE, FCC
◆ Dimension (WxDxH)
100x190x40.5 mm / 3.94"x7.5"x1.6"
◆
Input
ORION-250S is a high output PSU for 1U
chassis. It's the best choice for your compact
system applications.
Features
Ordering Guide
●
ORION-250S
250W slim ATX PSU for 1U Chassis
40.5mm high, the best solution
250W high output for 1U solution
Total power of +5V &+3.3V is 150W
Provide OVP, OLP, SCP protection
Application
1U chassis
Compact node chassis
ORION-300S
Specifications
Voltage
Current
4A@115V, 2A@230V
+5V
+12V +3.3V -12V
-5V
◆ DC Output
Max. Load 30A
14A
15A
1A
0.5A
Min. Load 3A
1A
1A
0A
0A
◆ Efficiency
>75%
◆ Hold up Time
16ms. at full load
◆ Hi-Pot Test
◆ Over Voltage Protection +5V: 5.15V ~ 6.45V/+12V: 12.6V ~ 15.6V
When over 120%
◆ Safety Approval
UL, TUV, CE, FCC
100x210x70 mm / 3.94"x8.3"x2.8"
◆
Input
ORION-300S is the smallest 300W ATX PSU
in the world. Its fancy and smart design makes
it possible to integrate those compact systems
into your applications.
Features
Ordering Guide
●
ORION-300S
300W slim ATX PSU for 2U Chassis
59
High power output for 2U solution
Total power of +5V &+3.3V is 150W
Application
2U chassis
ORION-300DX
-48V & 24V DC Input PS/2 Type DC/DC Converter with ATX Output
Specifications
Voltage
◆
Input
Current
◆
DC Output
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
Efficiency
◆ MTBF
◆
◆
◆
Safety Approval
◆
DC -40V ~ -72V for -48V input
DC 19V ~ 32V for 24V input
10A@-48V DC input
20A@24V DC input
+5V
+3.3V +12V -5V
-12V
30A
15A
15A
2A
2A
2A
0A
0.1A 0A
0A
150W
180W 10W 24W
+/-3% +/-2% +/-5% +/-2% +/-2%
+/-5% +/-5% +/-5% +/-10% +/-10%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 65%
+5V: 5.6V ~ 6.5V
Total o/p 110% ~ 130%
> 150,000 hrs
0 ~ 70˚C (-20˚C can start up)
The maximum 300W output power
should be under the cabinet
temperature 30˚C
TUV, CSA, NRTL/C, UL
150x140x86 mm / 5.9"x5.5"x3.4"
Features
-48 or +24 V DC input, ATX output
Provide +5V o/p to have OVP design
-20˚C can start up
Application
Truck
Telecommunication
Remote control unit
Ordering Guide
●
ORION-300DX/48
●
ORION-300DX/24
300W PS/2 type -48V DC/DC converter with ATX output
300W PS/2 type 24V DC/DC converter with ATX output
BPS-250RDDX/48
-48V Input 450W PS/2 Type DC/DC Hot-Swap Redundant Power Supply
Specifications
◆
Features
AT or ATX output as optional
Provide OVP, OLP protection
Provide 1A for +5V VSB
Application
Telecommunication
environment
Remote control unit
Input
◆
DC Output
◆
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
Voltage
Current
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆ MTBF
◆ Safety Approval
◆
◆
Ordering Guide
●
BPS-250RDD/48
-48V DC input PS/2 type hot-swap redundant PSU
●
BPS-250RDDX/48
-48V DC input PS/2 type hot-swap ATX redundant PSU
◆
◆
Dimension (WxDxH)
DC -40 to -56V
8A
+5V
+3.3V +12V -5V
-12V
30A
15A
14A
0.5A
0.5A
3A
3A
1A
0A
0A
220W
10W
+/-5% +/-5% +/-5% +/-10% +/-10%
+/-5% +/-5% +/-5% +/-10% +/-10%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 75% at full load
16ms. at full load
+5V: 5.6V ~ 6.5V/+12V: 12.6V ~ 15.6V
Total o/p 130% ~ 150%
> 167,000 hrs
UL, CUL, TUV, CE
Operating : 10 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
150x140x86 mm / 5.9"x5.5"x3.4" (RDD)
150x175x86 mm / 5.9"x6.9"x3.4" (RDDX)
60
ORION-450AX
Full 450W Single PS/2 Type ATX Power Supply with Auto-range Input
Specifications
◆
◆
Voltage
Frequency
Current
Input
DC Output
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
◆
◆
Over Circuit Protection
◆ MTBF
◆ Safety Approval
◆
◆
◆
◆
Dimension (WxDxH)
AC 95 ~ 132V, 185 ~ 264V Auto-range
47 ~63 Hz
7A@115V, 4A@230V
+5V
+3.3V +12V -5V
-12V
40A
28A
17A
0.5A 1.5A
2A
0A
0.2A 0A
0A
225W
204W 2.5W 18W
+/-5% +/-5% +/-5% +/-5% +/-10%
+/-5% +/-5% +/-5% +/-10% +/-5%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-1% +/-1%
+/-1% +/-1% +/-1% +/-2% +/-2%
> 70% at full load
16.7ms. at full load
+5V: 5.6V ~ 6.5V/+3.3V: 4.0V ~ 4.5V
+12V: 13.5V ~ 15.5V
Shutdown power supply
Total o/p 110% ~ 130%
> 100,000hrs
UL, CSA, TUV, CE, FCC
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
150x140x86 mm / 5.9"x5.5"x3.4"
ORION-450AX is a brand new design for higher
output ATX PSU. It is designed to meet the
demand of high current support, such as servers
or disk-array.
Features
Application
Full 450W output design
Auto-range AC input
+5V,+12V,+3.3V OVP design
One ATX and one P9 connector
Internet server
High-end Rack-mount
computer
Ordering Guide
●
ORION-450AX
Full 450W PS/2 type ATX PSU with Auto-range input
ORION-330A
Full 330W Single PS/2 Type AT Power Supply with Auto-range Input
Specifications
◆
ORION-330A is the most cost effective PSU
designed to fit your mid-grade server that needs
more power than that of PC. It is mostly adopted in
the rack-mount systems.
Features
Auto-range AC input
Provide OVP, OCP protection
Application
Rack-mount chassis
Factory environment
Ordering Guide
●
61
ORION-330A
Full 330W PS/2 type AT PSU with Auto-range input
Input
Voltage
Frequency
Current
Max. Load
Min. Load
Max. Watt.
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
◆
DC Output
◆
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
◆
◆ MTBF
◆ Safety Approval
◆
◆
◆
◆
Dimension (WxDxH)
AC 95 ~ 132V,190 ~ 264V Auto-range
47 ~ 63 Hz
10A@115V, 5A@230V
+5V
+12V
-5V
-12V
30A
14A
0.5A
1A
2A
0.2A
0A
0A
150W
168W
2.5W
12W
+/-5%
+/-5%
+/-5%
+/-10%
+/-5%
+/-5%
+/-10% +/-5%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-2%
+/-2%
> 70% at full load
16.7ms. at full load
+5V: 5.6V ~ 6.5V/+3.3V: 4.0V ~ 4.5V
+12V: 13.5V ~ 15.5V
Shutdown power supply
Total o/p 110% ~ 130%
> 100,000 hrs
UL, CSA, TUV, CE, FCC
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
150x140x86 mm / 5.9"x5.5"x3.4"
PW-380/250
Standard 380W/250W PS/2 Type Power Supply
Specifications
Voltage
10A@115V, 5A@230V for 380W
Current
8A@115V, 4A@230V for 250W
+5V
+12V
-5V
-12V
Max. Load 36A
16A
0.5A
0.5A
◆ DC
380W
Output
Min. Load 3A
1A
0A
0A
Max. Load 25A
10A
0.5A
0.5A
250W
Min. Load 1A
0.4A
0A
0A
◆ Efficiency
> 70%
◆ Hold up time
16ms at full-load
1.5K VRMS, 60 sec from i/p to ground
◆ Hi-Pot Test
1.5K VRMS, 60 sec from i/p to o/p
+5V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V
◆ Over Voltage Protection
+12V: 13.6V ~ 15.6V
+5V, +3.3V: 110% ~ 130%
◆ Over Current Protection
+12V: 120% ~ 150%
Total o/p 110% ~ 130%
◆ MTBF
> 50,000hrs
◆ Safety Approval
UL, CSA, TUV, CE, CB, FCC
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
150x140x86 mm / 5.9"x5.5"x3.4"
◆
Input
PW-380/250 is a typical PS/2 power supply that
has been used for several years. With its steady
quality and reliability, it is still extensively adopted
and receives high popularity.
Ordering Guide
●
PW-380
●
PW-380A
●
PW-250
380W PS/2 type AT PSU
380W PS/2 type Auto-range AT PSU
250W PS/2 type AT PSU
PW-300ATX
Standard 300W PS/2 Type Power Supply
Features
Provide OVP, OCP, OLP protection
Application
Rack-mount chassis
Factory environment
Specifications
Voltage
Current
10A@115V, 5A@230V for 300W
+5V
+12V +3.3V -5V
-12V
Max. Load 30A
14A
22A
0.8A 1A
◆ DC Output
Min. Load 2A
0.2A 0A
0A
0A
Max. Watt (+5V)+(+3.3V) < 140W
◆ Efficiency
> 70%
◆ Hold up time
16ms at full-load
1.5K VRMS, 60 sec from i/p to ground
◆ Hi-Pot Test
1.5K VRMS, 60 sec from i/p o/p
◆ Over Voltage Protection +5V: 5.6V ~ 6.5V/+3.3V: 3.8V ~ 4.3V
+12V: 13.6V ~ 15.6V
◆ Over Current Protection +5V, +3.3V: 110% ~ 130%
+12V: 120% ~ 150%
Total o/p 110% ~ 130%
◆ MTBF
> 40,000hrs
◆ Safety Approval
UL, CSA, TUV, CE, CB, FCC
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
150x140x86 mm / 5.9"x5.5"x3.4"
◆
Because of its good reliability and quality for ATX
functionality. PW-300ATX is the best seller among
all PSUs.
Ordering Guide
●
PW-300ATX
300W PS/2 type ATX PSU
Input
62
BPS-7004/24/12
70W Open Frame +24V or +12V DC to DC Power Supply
Specifications
◆
Voltage
Input
Current
◆
Max. Load
Min. Load
Load Reg.
Cross Reg.
Line Reg.
Ripple
Noise
DC Output
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
◆
◆ MTBF
◆ Safety Approval
◆
◆
◆
◆
Dimension (WxDxH)
DC 18V to 30V for 24V input
DC 10V to 18V for 12V input
4A
+5V
+12V
-5V
-12V
7A
2.5A
0.3A
0.3A
3A
1A
0A
0A
+/-5%
+/-5%
+/-10% +/-10%
+/-5%
+/-5%
+/-10% +/-10%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-2%
+/-2%
> 70% at full load
16ms. at full load
+5V: 5.15V ~ 6.45V/+12V: 12.6V ~ 15.6V
Total o/p 130% ~ 150%
> 50,000hrs
UL, CUL, TUV, CE
Operating : 10 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
80.6x127x50 mm / 3.2"x5"x2"
BPS-7004 is a well designed PC PSU for those
applications to equipment for boat, mobile and
truck. Without the possibility of fan failure, it is
more stable and reliable than any others.
Features
Max. output 70W
Open frame design to save space
Provide OVP, OLP protection
Application
Compact chassis
Equipment
Panel PC
Ordering Guide
●
BPS-7004/24
●
BPS-7004/12
70W open frame 24V DC/DC converter
70W open frame 12V DC/DC converter
SNP-9F40
65W Universal Input Open Frame Power Module
Specifications
SNP-9F40 is an open frame PSU used in those
compact machine or equipment. It has been in
the market for a long time because of its good
reliability and quality.
◆
Input
◆
DC Output
◆
◆
Efficiency
Holdup Time
◆
Hi-Pot Test
Voltage
Frequency
Current
Max. Load
Min. Load
Max. Watt.
◆ MTBF
◆
◆
Features
Universal AC input
Easy to install
Long life cycle
Application
Compact chassis
Equipment
Panel PC
◆
◆
Safety Approval
Dimension (WxDxH)
◆
Ordering Guide
63
●
SNP-9F40
65W universal input power supply
AC 90 ~ 264V
47 ~ 63 Hz
1.5A@115V, 0.8A@230V
+5V
+12V
-5V
-12V
4A
3A
0.3A
0.3A
0A
0A
0A
0A
20W
36W
1.5W
3.6W
>70%
16ms. at full load
Crowbar, Trip point 6.2V +/-0.5V
Auto recover
Fold back
281,000hrs
Operating : 0 ~ 50˚C, 20 ~ 90%RH
Storage : -20 ~ 60˚C, 5 ~ 95%RH
TUV, CSA, NRTL/C
127x76.2x36 mm / 5"x3"x1.4"
ORION-150AX
Specifications
Voltage
AC 90 ~135V, 180 ~260V Auto-range
Current
5A@115V, 2.5A@230V
+5V
+12V +3.3V -12V
-5V
◆ DC Output
Max. Load 10A
6A
6A
1A
0.2A
Min. Load 1A
1A
1A
0A
0A
◆ Efficiency
> 60%
◆ Hold up Time
16ms. at full load
◆ Hi-Pot Test
◆ Over Voltage Protection +5V: 5.5V ~ 7V/+3.3V: 4.0V ~ 4.5V
+12V: 13.5V ~ 16V
110% ~150%
◆ Safety Approval
UL, TUV, CE, FCC
100x190x40.5 mm / 3.94"x7.5"x1.6"
◆
Input
ORION-150AX is the smallest 150W AT X
PSU in the world. Its fancy and smart design
makes those compact systems available in
your applications.
Features
Ordering Guide
●
ORION-150AX
Slim type of 150W ATX PSU with Auto-range input
40.5mm high, the best solution
95~135V, 180~265 Auto-range input
PFC function as optional
Application
1U chassis
ORION-48T
-48V DC Output Power Supply Tester
ORION-48T is designed for those engineers who
need 48V power source for system testing. By
using so many batteries to get the 48V power
source in our laboratory is not easy. The ORION48T is just what engineers need for their
application.
Ordering Guide
●
ORION-48T
-48V DC power supply tester
Features
Input voltages: 110V/220V
Output voltage: -48V DC
Max. output: 300W
Application
Testing equipment
64
18-bit TFT panel Interface
Parallel port
Power connector
NS Geode Gx1 low-power CPU
Licensed BIOS
Ultra DMA/33 IDE channel
PC/104 Interface
Two USB ports
Dual Intel¨ 10/100 Base-TX
fast Ethernet
RS-232
Audio port
VGA port
PS/2 K/B & Mouse
Reset
IDE connector
Realtek Ethernet chip (on rear side)
Parallel port
Winbond I/O chip FDD port Four COM RS-232
168-pin DIMM socket
External power connector
10/100 Base-T Ethernet port
Intel¨ 430TX south bridge
Intel¨ 430TX north bridge
VGA port
Panel display port
PS/2 Mouse connector
External K/B connector
PS/2 K/B connector
Licensed BIOS
Socket 7 for CPU
DOC socket
RTC battery C&T69000 VGA chip
Ultra DMA/33 IDE connector FDD port
Intel¨ 440BX south bridge
168-pin DIMM socket
Parallel port
Headers for USB port
COM1/RS232
COM2/RS232
Intel¨ 440BX north bridge
PS/2 mouse connector
Panel display port
370 for Celeronª processor
VGA port
DOC socket
I/O decoder
PS/2 KB connector
Licensed AMI BIOS
C&T 69000 VGA chip
FDD port
Parallel port
RS-232
168-pin DIMM socket
Power connector
Intel¨ 815E chip
PS/2 K/B & Mouse
4MB display cache
Audio
VGA port
Two Ultra DMA/100 IDE
LAN Rj45
Intel¨ FWH
USB port
Socket370 for Pentium¨ III
or Celeronª Processor
Intel¨ ICH2 chip
ATX power control
ATI Rage PRO AGP
Three 168-pin DIMM sockets
Two IDE connectors
RTC battery
FDD port
Parallel port
RS232
Licensed AMI BIOS
VGA port
DOC socket
PS/2 K/B connector
ZIF socket for CPU
ALi M1541 north bridge
512 KB cache memory
USB port
ALi M1543C south bridge
4MB VRAM
Four 168-pin DIMM sockets
Intel¨
Two IDE connectors
440BX south bridge
FDD port
PIO port
COM1/RS232
Panel display port
PS/2 mouse
VGA port
COM2/RS232
DS1687 real Y2K RTC
PS/2 K/B connector
Socket 370 for Pentium¨ III
or Celeronª processor
USB port
DOC socket
PC/104 connector
C&T 69000 display chip
Power management
Two Ultra ATA/33/66 IDE
VGA cache memory
Two 168-pin DIMM sockets
Intel¨ 82559 10/100 Base-T Ethernet
Ultra 160 SCSI port
FDD port
PIO port
ATX controller
RS232
LAN/RJ-45
VGA port
PS/2 K/B connector
FC-PGA 370 processor
PCI-to-ISA bridge
Intel¨ FWH
Clock generator
Intel¨ i810e chipset
Adaptec AIC-7892
DOC socket
Two IDE connectors
Four 168-pin DIMM sockets
FDD port
Intel¨ 440BX south bridge
PIO port
RS-232
10/100 Base-T
Ethernet port
C&T 69000 display chip
VGA port
PS/2 mouse connector
DS1687 real Y2K RTC
PS/2 K/B connector
Panel Display Port
or Celeronª processor
DOC socket
Intel¨ 82559 10/100 Base-T Ethernet
Two DIMM Sockets
Intel¨
4MB display cache
Two IDE ports (ATA-100)
Intel¨ ICH2 Chip
Battery
815E Chip
RS-232
FDD port
Parallel port
Dual LAN/RJ45
USB port*
PS/2 K/B & Mouse
Socket 370 for Celeronª
or Pentium¨ III Processor
PCI to ISA Bridge
Intel¨ FWH
Intel¨ 82559 LAN Chip
DOC socket
Additional Power Source
VGA port
PCI extension Connector
Four DIMM Sockets
Intel¨ 440BX North Bridge
Additional power source
Two IDE ports
RS-232
FDD port
Parallel port
DS1687
LAN/RJ45
Intel¨ 82559 LAN Chip
USB port*
PS/2 K/B & Mouse
PCI extension connector
VGA port
C&T 69000 chip
Dual Socket 370 for Celeronª
or Pentium¨ III Processor
Licensed BIOS
Intel¨ 440BX South Bridge
DOC socket
Two IDE ports (ATA-66)
Two RIMM sockets
Intel¨ 840 chip
RS232
Intel¨ ICH Chip
FDD port
Parallel port
Battery
10/100 Base-T Ethernet port
Intel¨ 82559 LAN chip
USB port*
PS/2 K/B & Mouse
VGA port
Intel¨ FWH
or Celeronª Processor
DOC socket
C&T 69000 VGA chip

Full-size Single Board Computer Quick Reference Table

Transcription

Similar documents

the extra mile. - Jetco Delivery

ROBO-668

BusCon 2012 EXHIBITORS

CF-SX4 Fact Sheet

Taming Your Indicator Consumption Pipeline

A 100 Watt Audio Amplifier Employing The LM3876

Dual k

Forest River Dynamax DynaQuest XL 2016 Brochure National RV

energy

600A / 900A 35 kV Class T-Body Deadbreak

Print Article