Ultroid Technologies, Inc.
Transcription
Ultroid Technologies, Inc.
Ultroid Technologies, Inc. 6023 South 2nd Street Tampa, FL 33611-4707 Ultroid® Hemorrhoid Management System (3053) ULTROID® MODEL 3053 OPERATING & MAINTENANCE MANUAL 0470 CAUTION: Federal law restricts this medical device to sale by or on order of a licensed physician. Ultroid Technologies, Inc. www.Ultroid.com 1 Rev 10.5.2010a Contents Service Policy System Usage and Scope of Application Product Description Product Specification and UHMS Components Product Safety Information Ratings Label Warranty Ultroid® Product List Contraindications Cautions Instructions for Pre-treatment Exam Assembly and Use of the UHMS Operational Testing Proper Patient Pad Placement Procedure Treatment Time Recommendations Review Cleaning Instructions for UHMS: Ultroid® Single-use Patient Probe Ultroid® Control Handle Ultroid® System Generator Contraindications for Use Anatomy Sample Patient Consultation Sample New Patient Questionnaire Grading of Hemorrhoids User Agreement Physician Marketing Tool Kit Rev 10.5.2010a 2 3 3 3 4 5 6 7 8 9 9 10 11 14 15 15 17 18 19 19 19 19 20 21 22 23 24 28 To Ultroid Technologies, Inc. Licensed Physician Clients: Ultroid® Technologies, Inc. requires that you read and follow the instructions in this manual and view the instructional segments of the resource CD, to ensure maximum performance of your Ultroid® System. maintenance will extend the life of your equipment. Proper care and Should you have any questions regarding care or operation of the Ultroid® System, contact a customer service representative at www.Ultroid.com or obtain a contact number from your local distributor. Service Policy: If equipment is in need of repair please contact your local distributor or Ultroid® customer service at 1 (877) 858-0555 or [email protected]. System Usage and Scope of Application: Ultroid® Hemorrhoid Management System Term: Electrotherapeutic direct current system. Intended Use/ Scope of Application: Elimination of all grades of internal hemorrhoids. Statement of Intended Use: The Ultroid® Hemorrhoid Management System is intended for physician use only. It is intended for coagulative hemostatic therapy of internal hemorrhoids grades I, II, III, IV. Product Description: The Ultroid® Hemorrhoid electrotherapeutic devices Management designed to System apply a is an assembly galvanic direct of current to the mucosal tissue surface of symptomatic internal hemorrhoids for their elimination. It consists of a main electricity (AC-powered) generator which produces direct current in milliamperes (mA) passed via a patient pad, through the body, to a probe (an electrode) applied to the hemorrhiodal tissue, a hand piece, and electrical cables. The tissue is subjected to mild electrical current creating a biochemical reaction that interrupts the hemorrhoid vasculature and shrinks the hemorrhoids. It may also be battery powered. The system is constituted of plastic, steel and metal. Rev 10.5.2010a 3 UHMS Product Specifications: Ultroid Hemorrhoid Management System primary components consisting of the Ultroid System Generator, Ultroid Control Handle, Ultroid Reusable Patient Pad, & Ultroid Single-use Procedure Kit. The Procedure Kit contains the following items: Ultroid Single-Use Probe, Ultroid Single-use Patient Pad Sponge, and an Ultroid Single-use Anoscope. UHMS System Components: Ultroid Reusable Patient Pad: The patient pad is a non-active, positive conductor that is connected to a hemorrhoid management system generator to create a circuit for the flow of direct current in milliamperes (mA) to the negative electrode (a hand-held probe contacting the hemorrhiodal tissue) allowing direct galvanic current to pass through internal hemorrhoidal tissue. The pad is placed under the patient’s body where the greatest surface area can be covered, (e.g., the thigh) and is connected to the generator via an electrical connection cord. It requires the insertion of a Single-use Patient Pad Sponge soaked with saline solution for conduction. This is a reusable device that can be disinfected after each procedure. The pad is not intended to be sterile. The Ultroid Patient Pad dimensions are 17.145 cm by 8.89 cm. The Pad is constituted of metal, plastic and rubber. Ultroid Hemorrhoid Management System Procedure Kit: A collection of non-sterile and sterile devices to be used in conjunction with the system to facilitate the procedure of electrically eliminating all grades of internal hemorrhoids. It includes a tissue contact electrode (a hand-held probe), a Patient Pad Sponge, and a disposable anoscope. This is a single-use package. The Procedure Kit is constituted of plastic, synthetic sponge, and stainless steel. Ultroid Single-use Probe: a sterile, probe-like, electrode designed with two monopolar electrical conductors (negative electrodes) at the terminal end intended to conduct direct current to the mucosal surface of symptomatic internal hemorrhoids. This device is inserted into the hand piece of the hemorrhoid management system and connected to the generator via an electrical connection cord. The Probe is a single-use device. It is made of stainless steel, plastic and thermal plastic for insulation of its extended shaft. Ultroid Single-use Patient Pad Sponge: a non-sterile, absorbent, device used to facilitate conduction of direct current from a hemorrhoid management system Patient Pad (the positive conductor) through the patient’s body to a probe (the negative electrode) applied to the hemorrhoid. It is inserted into a dedicated slot in the Patient Pad, moistened with normal saline solution, and applied directly to the patient’s skin surface where there is no therapeutic effect intended, (e.g., under the thigh). The Patient Pad Sponge is a single use device constituted of synthetic sponge. Ultroid Single-use Anoscope: An endoscope with a rigid inserted portion that is used for the visual examination and treatment of the anus and rectum. It is inserted into the body through the anus during the procedure called an anoscopy. The inserted portion is quite short in length, though longer than a sphincteroscope, and larger in diameter, and an obturator is typically inserted into its lumen to assist the insertion. This is a single-use device measuring 90 mm in length by 18mm in diameter, constituted of plastic. Rev 10.5.2010a 4 Ultroid Technologies, Inc. 6023 South 2nd Street Tampa, FL 33611-4707 Phone: 001.877.858.0555 Product Safety Information: Ultroid Hemorrhoid Management System : 3053 Electrical Class: Class II Degree of Protection: BF 0470 Voltage: 100 - 240 V Frequency: 50/60 Hz Power: 25 VA MAX 5.1 Volts DC Ambient Temperatures: Room Temperature Fuse: T1A, 250V (X2) IEC 60601-1 CAUTION ! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING ! DANGER! HAZARDOUS ELECTRICAL RISK OF EXPLOSION IF OUTPUT. THIS EQUIPMENT USED IN THE PRESENCE OF IS FOR USE ONLY BY FLAMMABLE ANESTHETICS. QUALIFIED PERSONNEL. PATIENT CONNECTION IS ELECTRONICALLY ISOLATED. Rev 10.5.2010a 5 Ultroid® Technologies, Inc. Tampa, FL 33611 Ratings Label DO NOT REMOVE LABEL Reference Number Serial Number Electrical Class Protection Class Voltage In IEC 60601-1 0470 Voltage Out Symbol Key: : Symbol for “MANUFACTURER” (the person placing the device on the market) : Symbol for “CAUTION” : Symbol for “PROTECTION CLASS” (special attention to be paid to instructions for use) : Symbol for “CATALOGUE NUMBER” (the manufacturer’s catalogue number for the device or part) : Symbol for “SERIAL NUMBER” (the manufacturer’s unit tracking number) : Symbol for “ELECTRICAL CLASS” (Electrical Class II Device) (Protection Class BF Device) : Symbol for “VOLTAGE IN” (100-240V , 50/60 Hz , 25 VA) : Symbol for “VOLTAGE OUT” (5.1VDC _ _ _, 0.25A) Rev 10.5.2010a 6 ONE YEAR MANUFACTURER WARRANTY: Important: Evidence of original purchase is required for warranty service including the return of the executed User Agreement as set forth on page 24, herein. WARRANTOR: Ultroid Technologies, inc. (“Ultroid®”) ELEMENTS OF WARRANTY: Ultroid® warrants for one year, to the original retail owner/End-User, the Ultroid® System Generators - 110/220 Volt and the Ultroid® System Generator - Battery-powered (the “Product”) only, to be free from defects in materials and workmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original retail owner/End-User shall terminate and be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modified, altered or used as a part of any other product or subsystem or configuration not sold by Ultroid®, (C) improperly used or configured, (D) serviced or repaired by someone other than an authorized Ultroid® service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Ultroid®, or (F) installed or programmed by anyone other than as detailed in the Ultroid® Hemorrhoid Management System Operating and Maintenance Manual for the Product. STATEMENT OF REMEDY: In the event that the Product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by the warrantor or its representatives in connection with performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESSED, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is NOT void outside the United States of America. If you are outside of the United States of America you must seek replacement through your distributor. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the Ultroid® Hemorrhoid Management System Operating and Maintenance Manual, you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. 7 Rev 10.5.2010a Ultroid® Technologies, Inc. Product List: Primary Components: Ultroid® System Generator Ultroid® Control Handle Ultroid® Reusable Patient Pad Patient Pad Connection Cord Ultroid® Control Handle Connection Cord Power Cord (110, 220, Etc.) Ultroid® Single-use Procedure Kit Procedure Kit Components: Ultroid® Single-use Probe Ultroid® Single-use Patient Pad Sponge Ultroid® Single-use Anoscope Media Materials: Ultroid® Operation Manual For pricing on any of these products, please contact your local distributor. Rev 10.5.2010a 8 INDICATIONS FOR USE: Coagulative Hemostatic Therapy of Internal Hemorrhoids, Grades I, II, III, IV. CONTRAINDICATIONS: • Pregnancy • Pacemaker and/or defibrillator implant • Bleeding disorder • Anticoagulant therapy • Active anorectal infection • Inflammatory bowel disease • Lower abdominal/lower quadrant transplant patients • Purely external hemorrhoids CAUTIONS: The following cautions apply to the use, care and/or maintenance of the Ultroid® Hemorrhoid Management System (UHMS.) 1. Study this manual, and other accompanying instructions, carefully and thoroughly before handling the Ultroid® System(UHMS) and any of its accessories. Keep this manual in a convenient and accessible location for reference. Prior to contacting Ultroid Technologies, Inc. or your local distributor, please re-read this manual for possible solutions. 2. The Ultroid® Hemorrhoid Management System should be handled with care by informed personnel who are familiar with its assembly, operation and disassembly. It is a precision medical device which can be damaged by misuse or abuse. 3. The operational safety test must be performed prior to each patient treatment. This testing will assure proper performance and allow diagnosis of any technical malfunctions prior to patient treatment. 4. Follow all labeling instructions for the safe handling and storage of the UHMS. Improper storage will damage components. 5. View the physician instructional video on the Ultroid® In-service Presentation prior to the firstuse of the UHMS. 6. Inability to obtain adequate milliamperage is often a result of: a. A failure to completely soak the Patient Pad; and/or b. A failure to use 0.9% normal saline solution to soak the Patient pad. NOTE: Inadvertent failure to comply with any of the procedures outlined in the the Ultroid® Operation Manual may result in poor conduction and an inability to achieve a current greater than 4-6 mA. 7. The Single-use Probe is not for reuse or attempted sterilization. Reuse of the probe will cause patient to patient disease transmission. Attempting to clean or sterilize the probe will cause a breakdown of the polymer and result in bacterial contamination as well as an unstable connection between the male end of the probe and the female insertion site on the control handle. Rev 10.5.2010a 9 INSTRUCTIONS FOR PRE-TREATMENT EXAM: 1. Correct HD diagnosis is made by a comprehensive internal and external anal examination. Wearing gloves, first perform a standard external anal exam looking for redundant anal tissue, active inflammation, infection and abscess formation or other pathology. Palpate the perianal area during this process. 2. Next, perform a digital examination using lubrication or *Xylocaine® jelly. Feel for the presence of any mass, lesions or other pathology. Use the disposable anoscope with the operative port for the anoscopic exam. When the obturator is removed from the anoscope, a small area of tissue protrudes into the visual field for treatment. Surrounding tissue is protected. 3. Each of the four quadrants of the anal canal can be divided into two equal areas to help localize the hemorrhoid. By rotating the speculum, the entire anal canal is viewed and the position of pathology is noted. 4. Slowly insert the lubricated anoscope into the anal canal. introduction fosters patient comfort. Slow 5. Remove the obturator slowly to avoid a vacuum effect and examine the area protruding through the operative port. If hemorrhoids are present, determine the grade. To do this, ask the patient to “strain.” Determine if the protruding hemorrhoids are prolapsing down the anal canal. a. Grade I hemorrhoids will project into the lumen. They may or may not show signs of active bleeding. b. Grade II hemorrhoids will prolapse through the operative port and spontaneously retract into the anal canal when the patient stops straining. c. Remove the anoscope if the hemorrhoid tissue remains prolapsed. Determine if you can manually reduce the tissue into the anal canal. Ability to manually reduce indicates a grade III hemorrhoid. d. If the tissue is not reducible and is prolapsed with anal rectal mucosa affixed to the outside of the anal canal, it is a grade IV hemorrhoid. Generally these are noted on the external examination and can be confirmed during the retraction of the anoscope. 6. In addition to determining hemorrhoid grade and position, examine the hemorrhoids for signs of inflammatory changes, bleeding, hypertrophied anal papilla and other pathology. Determine and note the grade of hemorrhoid for each anal segment. In most instances, it is appropriate to treat the highest grade of hemorrhoid first. 7. Replace the obturator to move the involved tissue out of the operative port before rotating the anoscope to the next area. Continue in this manner to examine the entire circumference of the anal canal. 8. Be sure to examine each segment separately. 10 Rev 10.5.2010a ASSEMBLY: ULTROID® HEMORRHOID MANAGEMENT SYSTEM Assemble Ultroid Reusable Patient Pad 1. Place the Ultroid® Single-use Patient Pad Sponge into the Ultroid® Patient Pad. SOAK the Patient Pad Sponge with 0.9% NORMAL SALINE (Do not use sterile water, distilled water, tap water, etc. The unit will not conduct properly without normal saline solution.) 2. Insert either end of the Patient Pad Connection Cord into the Ultroid® Reusable Patient Pad. Confirm a secure connection between Patient Pad Connection Cord and the receiving bracket of the Patient Pad. 3. Insert the other end of the Patient Pad Connection Cord into the “PATIENT PAD” socket of the Ultroid® System Generator. PATIENT PAD HANDLE Rev 10.5.2010a 11 4. Plug Control Handle Connection Cord into the Ultroid® Control Handle by aligning the white placement dots on the Control Handle and Connection Cord. Rotate clockwise to lock and secure the connection. 5. Plug the Handle Connection Cord into the “HANDLE” Socket of the Ultroid® System Generator by aligning the white placement dots on the “HANDLE” Socket and Connection Cord. Rotate clockwise to lock and secure the connection. PATIENT PAD HANDLE Rev 10.5.2010a 12 6. Without removing the clear plastic probe sleeve, insert the Ultroid® Single-use Probe into the corresponding receptacle of the Ultroid® Control Handle. NOTE: Probe may be inserted with tips in the vertical or horizontal position, depending upon the location of the hemorrhoid. 7. Plug the Power Cord into the Power Socket of the Ultroid® System Generator. Ensure that the unit power switch is set to OFF prior to plugging the unit into a wall outlet. Ensure that the plug component fits with the appropriate wall socket configuration. Plug the power cord into the appropriate wall outlet. 8. To initiate power, set the power switch to ON. The Ultroid® Control Handle will illuminate, indicating power has been established. Remove the clear plastic probe sleeve. The UHMS is now ready for Operational Testing. PATIENT PAD HANDLE 13 Rev 10.5.2010a OPERATIONAL TESTING: Prior to each patient treatment, the to ensure proper performance and functions. To perform the Operational is established by placing the probe saline soaked patient pad. operational test should be performed allow for diagnosis of technical malTesting on the UMHS, a closed circuit tips firmly against a connected and 1. Place the probe tips firmly against the saline soaked Ultroid® Patient Pad Sponge 2. Press “TEST” button while touching the probe to the Patient Pad Sponge. If the sponge is not thoroughly soaked with saline or the resistance is too high, an error state occurs which forces all time digits to (88.88) and prohibits the start of a procedure. This state will persist until the test is passed. If there is no error, the timer display and mA bar graph will be blank and a blinking dot will appear in the timer display indicating the operational test is complete. 3. If the “TEST” passes, you may procede with the procedure. You are now ready to perform the Ultroid® Procedure. Rev 10.5.2010a 14 INSTRUCTIONS FOR PERFORMING THE ULTROID® PROCEDURE: PROPER PLACEMENT OF THE ULTROID® Patient Pad: 1. Place the Ultroid® Reusable Patient Pad with the saturated (0.9% normal saline solution) sponge surface in direct contact with the patient’s skin under the dependent thigh (weight bearing thigh). 2. Ultroid® Technologies, Inc. recommends the lateral position for patient comfort and to ensure complete Patient Pad contact. PROCEDURE: 1. Be sure the Patient Pad is adequately saturated and placed. Following anoscopic examination, isolate the hemorrhoid to be treated in the side viewing slot of the anoscope. 2. Probe is placed in the control handle so tips are vertical for hemorrhoids in the anterior (A) and posterior (P) locations. Probe tips are horizontal for hemorrhoids in the left (L) and In this example, patient is in the right lateral position. right (R) locations. 3. Place the Ultroid® Single-use Patient Probe tips onto the hemorrhoid at the base of the feeding vessel and not on the body. Be sure the probe tips are applied to the hemorrhoidal tissue above the dentate line to avoid causing pain to the patient. It is NOT necessary to penetrate the tissue with the probe tips. 4. Press “START” button to begin the timer. The handle timer will increase every second up to 99.59. NOTE: there is NO current generated at this point. 5. To initiate current, press the “UP” crease 1mA with each depression. increments of 2 mA per bar. button and the current applied will inThe mA bar indicates current increases in If the user lifts the probe from the tissue, the current terminates; however, the handle timer will continue to count. To restart the current, reposition the probe tips and then press the “UP” button until desired current level is reached. NOTE: Be sure to monitor the mA bar indicator and not the handle timer, as the timer will continue to increase even in the absence of current. IMPORTANT: Pressing the “DOWN” button until the mA indicator lights disappear (i.e. mA is zero) and the handle timer display indicates 00.00 will terminate the procedure. In order to restart the procedure the operational test must be repeated, as described on page 14 of this manual. Rev 10.5.2010a 15 5. Increase the milliamperes slowly to a maximum setting of sixteen (16) milliamperes, or until the patient experiences any discomfort. Each patient will have a different tolerance level to the treatment. A gradual increase of current over one to two minutes is tolerated best. 6. Length of treatment is a function of the hemorrhoid grade and the current tolerated. The treatment time is clearly indicated on the Ultroid® Control Handle in minutes and seconds (00.00). Successful treatment is dependent upon maximum current used and duration of treatment (see treatment time recommendation chart on page 17). 7. During the treatment, you may note a color change of the treated area. Occasionally, popping noises will be heard, indicating the release of hydrogen gas. 8. There are several ways to determine when to stop the treatment. Continue treating the hemorrhoid until it has darkened in color, the popping sounds cease, and/or until you reach the recommended treatment time for the specific hemorrhoid Grade (Chart A P.17). NOTE: color change and the popping sound of gas release at the probe tip are present with significant variability and become more useful as indicators of a successful treatment after experience by the practitioner is gained. NOTE: Treatment time increases or decreases depending on milliamperage tolerated by the patient. As a general rule, the higher milliamperage applied, the shorter the procedure, and the less milliamperage applied, the longer the procedure. 9. When treatment is complete, depress the “DOWN” button on the Ultroid Control Handle until the mA indicator disappears (all milliamperage indication lights are off ) and the handle timer reads 00.00. Remove the Ultroid® Single-use Patient Probe from the hemorrhoid tissue. DISCARD THE PROBE IN AN APPROPRIATE BIOHAZARD CONTAINER AFTER USE. 10. The treated hemorrhoid segment should be re-examined approximately 10-14 days post treatment. If the treated hemorrhoid segment is improved but not resolved, an additional treatment may be warranted. Rev 10.5.2010a 16 Treatment Time Recommendations: Effective treatment is a function of the maximum current used and the duration of the treatment, known as the milliampere-minute (mA x min) product. The milliampere-minute product is directly correlated with disease grade. Using the average milliampere-minute product necessary for hemorrhoid resolution*, treatment times were calculated for each grade and maximum current applied. Maximum current applied is determined by the patient’s tolerance. These tables are intended serve as a guide and should be used in conjunction with the visual clues outlined above. * Norman, Daniel A. et al. Direct Current Electrotherapy of Internal Hemorrhoids; An Effective, Safe, and Painless Outpatient Approach. Am J Gastroenterol. 1989 May; 84(5):482-7 Rev 10.5.2010a 17 REVIEW: Key points to remember when treating internal hemorrhoids with the Ultroid® Hemorrhoid Management System: 1. First, complete a digital and anoscopic examination. Identify and document all hemorrhoids and their grade. 2. Setup the UMHS and test the unit following the “Assembly” and “Operational Testing” protocols. 3. Properly place the Ultroid® Patient PAD: Place the Ultroid® Patient pad with the saturated sponge (0.9% normal saline solution) surface touching the patient’s skin under the dependent thigh (weight bearing thigh). NOTE: The lateral position is recommended for patient comfort and to ensure complete Patient Pad contact. 4. Isolate the hemorrhoid to be treated in the viewing slot of the ansocope. 5. Introduce the Ultroid® single-use Patient Probe into the anoscope, making sure to angle it towards the operative slotted section. Place the probe tips on the base of the tissue, (the feeding vasculature of the hemorrhoid.) The probe tips should be placed above the dentate line at all times. 6. Activate the current to the probe tips by depressing the “START” then the “UP” button on the handle. button, 7. Increase the milliamps slowly up to a maximum of sixteen (16) milliamps, or until the patient begins to feel discomfort. Each patient will tolerate different levels of mA current. A gradual increase of direct current over a period of one to two minutes is tolerated best. If a patient experiences discomfort, decrease the current by 2mA. After one to two minutes, reattempt increase of current. Continue treating the hemorrhoid until it has darkened in color, the popping sounds cease, and/or until you reach the recommended treatment time for the specific hemorrhoid Grade (Chart A P.17). 8. Once treatment is complete, gradually decrease current to zero. 9. Complete a follow-up patient examination 10 to 14 days post procedure. Treat remaining symptomatic hemorrhoids following the recommended protocol. The most severe hemorrhoids may require more than one treatment. 10. If the procedure is carefully performed as outlined in this manual, Ultroid is a safe, effective, and painless outpatient procedure for the treatment and management of ALL Grades of HD (hemorrhoidal disease). Rev 10.5.2010a 18 CLEANING INSTRUCTIONS FOR THE ULTROID® HEMORRHOID MANAGEMENT SYSTEM (UHMS): ULTROID® SINGLE-USE PATIENT PROBE: The single-use patient probe is intended for single-use only. As such, Ultroid Technologies, Inc. recommends proper disposal of the probe into a biohazard waste receptacle at the conclusion of an Ultroid® treatment with the clear protective sleeve placed back on the probe. This will eliminate the chance of infectious disease transmission. ULTROID® CONTROL HANDLE: At the conclusion of an Ultroid® treatment, carefully wipe the control handle with alcohol solution. NOTE: Do not allow any liquid to enter the nose piece of the control handle. Do not immerse any of the Ultroid® Hemorrhoid System’s components into liquid. ULTROID® SYSTEM GENERATOR: The Ultroid® System Generator can be wiped down with alcohol solution. NOTE: Do not allow any liquid to enter any of the plugs, connectors, or openings on the unit. CONTRAINDICATIONS FOR USE: Ultroid® is contraindicated for patients with the following conditions: • Pregnancy • Pacemaker and/or defibrillator implant • Bleeding disorder • Anticoagulant therapy (relative contraindication) • Active anorectal infection • Inflammatory bowel disease • Lower abdominal/lower quadrant transplant patients • Purely external hemorrhoids Rev 10.5.2010a 19 ANATOMY: Internal Hemorrhoidal Plexus Dentate Line External Hemorrhoidal Plexus Right Posterior Left Lateral Right Anterior Usual position of internal hemorrhoids, or anal cushions. Origin below dentate line (external plexus) External Hemorrhoid Origin above dentate line (internal plexus) Internal Hemorrhoid Rev 10.5.2010a 20 Origin above and below dentate line (internal and external plexus) Mixed Hemorrhoid SAMPLE PATIENT CONSULTATION: This is a suggested patient chart. It is not intended as a substitute for taking and recording a complete medical history and conducting a thorough investigation. Rev 10.5.2010a 21 SAMPLE NEW PATIENT PACKET ADDENDUM: This is a suggested patient chart. It is not intended as a substitute for taking and recording a complete medical history and conducting a thorough investigation. Rev 10.5.2010a 22 GRADING OF HEMORRHOIDS: Grading is based on history and physical exam. If the patient is unsure whether prolapse is present, the physician may ask the patient to Valsalva (strain). Grade 1: • Mildest • Bulge into the anal canal and often bleed but do not prolapse beyond the anal verge (does not go outside of the anus) Grade 2: • May prolapse beyond the anal verge with straining but reduce spontaneously when strain ing ceases (goes back into anal canal without assistance) Grade 3: • Prolapses beyond the anal verge spontaneous ly or with straining and requires manual reduc tion (must be pushed back into anal canal) Grade 4: • Chronically prolapsed and cannot be reduced (pushed back inside anal canal) • Most severe Rev 10.5.2010a 23 USER AGREEMENT: THIS USER AGREEMENT (“Agreement”) is signed this _____________ day of ____________, 20__, by ________________________, a _______________ (corporation)(professional association)(other) with (its)(his)(her) principal place of business in ___________________ (“USER”). RECITALS A. Ultroid® is in the business of manufacturing a medical device recognized by the Food and Drug Administration (“FDA”) with its related procedures for the treatment of hemorrhoids known as the Ultroid® Hemorrhoid Management System (“3053”). B. The System uses a single-use patient probe which has been recognized by the United States Food and Drug Administration (FDA) for “Single-use Only”. C. USER has fully acquainted itself with the use of the System and is in full and complete understanding of the guidelines, representations, warranties, FDA product approvals acquired, established and promulgated by Ultroid®. D. USER desired to use the System in the medical/osteopathic practice. E. Ultroid® agrees to permit and provide to USER the System for use in USER’s practice, and USER agrees to strictly abide by the Ultroid® Hemorrhoid Management System’s Operating & Maintenance Manual and this User Agreement in USER’s use of the System. NOW, THEREFORE, for good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the USER, intending to be legally bound, hereby agrees as follows: 1. USER’S RESPONSIBILITY AND COMMITMENT. USER understands and agrees that certain duties and responsibilities shall govern such arrangement and that it shall: a. Strictly abide by the Ultroid® Hemorrhoid Management System Operating & Maintenance Manual, a copy of which is attached hereto and made a part hereof; b. Comply with the FDA approved 510K filed for the System as it relates to the use of the sterile, single-use patient probe (the “Probe”). c. Dispose of the Probe after each single-use into a biohazard waste receptacle at the conclusion of an Ultroid® treatment. d. Not attempt to clean or re-sterilize or re-use the Probe on the patient or subsequent patients following the single-use of the Probe. Rev 10.5.2010a 24 2. REQUIRED DISCLOSURES. USER shall notify Ultroid® in writing within three days after any of the following events occur: a. USER’s license to practice medicine in the State or any other jurisdiction lapses or is denied, suspended, revoked, terminated, relinquished or made subject to terms of probation or other restriction; b. USER’s medical staff privileges at any health care facility are denied, suspended, revoked, terminated, relinquished (under threat of disciplinary action), or made subject to terms of probation or other restriction; c. USER’s professional liability policy is canceled or non-renewed and another policy with the same or similar coverage is not issued within 3 days of cancellation or non-renewal; d. USER is required to pay damages in any malpractice action by way of judgment or settlement; e. USER becomes the subject of an investigatory, disciplinary or other proceeding or action before any governmental, professional, licensing board, medical staff, or peer review body; f. USER’s Drug Enforcement Agency number is revoked, suspend ed, terminated, relinquished, placed on terms of probation, or restricted in any way; g. An event occurs that substantially interrupts all or a portion of USER’s professional practice or that materially adversely affects USER’s ability to perform USER’s obligations hereunder; h. USER’s conviction of an offense related to health care or USER’s listing by a federal agency as being debarred, excluded or otherwise ineligible for federal program participation; or, i. USER seeks protection as a debtor pursuant to the U.S. Bank ruptcy Code. USER understands and agrees that upon the occurrence of any one or more of the matters 2. a. through i. herein, Ultroid® has the right to termi¬nate its relationship with USER, revoke USER’s right to use the System, and demand and receive the return of all Ultroid® equipment which is a part of the System. 3. CONFIDENTIAL INFORMATION. USER shall hold all confidential information in the strictest confidence and shall not, during or subsequent to the term of this Agreement, use Ultroid®’s confidential information for any purpose whatsoever other than the performance of its duties and responsibilities hereunder or disclose Ultroid®’s confidential information to employees of USER except on a need to know basis or to third parties, and it is understood that such confidential information shall remain the sole property of Ultroid®. USER will abide by Health Insurance Portability and Accountability Act of 1996, Public Law 104191 (“HIPPA”) and Title 45, Sections 164.502(e) and 164.504(e) of the Code of Federal Regulations (“CFR”). Rev 10.5.2010a 25 4. INDEMNITY BY USER FOR MISUSE OR ALTERATION OF PRODUCT OR PROCEDURE. USER agrees to indemnify and hold Ultroid® harmless from any claims, suits, proceedings, losses, liabilities, damages, costs and expenses (inclusive of Ultroid®’s reasonable attorneys’ fees) made against or incurred by Ultroid® arising out of or in connection with any activities of the USER arising from USER’s misuse or alteration of the product which allegedly results in an injury to a patient by USER or an agent of the USER. USER shall be solely responsible for, and shall indemnify and hold Ultroid® harmless from, any claims, warranties or representations made by the USER or the USER’s employees or agents which differ from the warranty provided by Ultroid® in its limited warranty agreement. 5. LIMITATION OF LIABILITY. Limitation of Liability and No Consequential Damages. Ultroid®’S TOTAL LIABILITY TO USER OR ANY THIRD PARTY HEREUNDER SHALL BE LIMITED TO CONTRACT DAMAGES INCURRED BY USER AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES AS SET FORTH IN THE ONE YEAR LIMITED WARRANTY CONTAINED HEREIN. USER ACKNOWLEDGES THAT THIS LIMITATION OF LIABILITY AND CONSEQUENTIAL DAMAGES IS A FUNDAMENTAL ASPECT OF THE AGREEMENT AND THAT IN ITS ABSENCE, THE ECONOMIC TERMS SET FORTH IN THE AGREEMENT WOULD BE SUBSTAINTIALLY DIFFERENT. 6. TERMINATION. Either party may terminate this Agreement by providing thirty (30) days written notice to the other party. Either party may terminate this Agreement immediately without providing notice to the other party in the event of: (a) material breach of the Agreement by the other party; (b) the insolvency of the other party; (c) the institution of any proceeding in relation to the credit standing of the other party, such as bankruptcy, reorganization, rehabilitation or composition, by or against the other party; or (d) the appointment of any receiver or trustee for the other party. 7. RELATIONSHIP OF USER AND Ultroid®. The relationship between Ultroid® and USER established by this Agreement is of a vendor to its vendee. USER is an independent contractor and shall have and retain complete management and operation of its practice and business. All expenses that may be incurred by USER in connection with this Agreement shall be borne wholly and completely by USER, and Ultroid® shall not be in any way responsible or liable therefore. Neither USER, nor any person whose wages are paid by USER, shall be deemed a servant, agent (actual or apparent), joint venture, or employee of Ultroid® for any purpose whatsoever. No agency, employment, partnership, joint venture, or other joint relationship is created hereby, it being understood that USER and Ultroid® are independent contractors vis-à-vis one another and that neither has any authority to bind the other in any respect whatsoever. 26 Rev 10.5.2010a 8. ASSIGNMENT. USER may not assign this Agreement or any of its rights, duties or obligations under this Agreement to any third party without Ultroid®’s prior written consent. 9. SEVERABILITY AND WAIVER. In the event any provision of this Agreement is held to be invalid or unenforceable, the valid or enforceable portion thereof and the remaining provisions of this Agreement will remain in full force and effect. Any waiver (express or implied) by any party of any default or breach of this Agreement shall not constitute a waiver of any other or subsequent default or breach. 10. NOTICES. All notices required to be given in connection with this Agreement shall be sent by certified mail, return receipt required and addressed to: Ultroid Technologies, Inc. 6023 South 2nd Street Tampa, FL 33611-4707 877-858-0555 [email protected] If to USER: ________________________________________________ ________________________________________________ ________________________________________________ IN WITNESS WHEREOF, the USER has hereunto caused this User Agreement to be duly executed on the day and date first above written. USER: By: _________________________________________ (physician’s signature required) Print Name: __________________________________ USER COPY. To be retained in your files. 27 Rev 10.5.2010a If you did not receive the Ultroid Physician Marketing Tool kit with your UHMS, please contact your local distributor or the Ultroid home office at the following: Ultroid Technologies, Inc. Marketing Department 6023 South 2nd Street Tampa, FL 33611-4707 or 1 (877) 858-0555 or [email protected] or Materials can also be downloaded for print at www.Ultroid.com in the physician section under physician toolkit. All material requests will be mailed to the address given by the physician office. Rev 10.5.2010a 28
Similar documents
Liberty Ammunition Inc.
• Plug the Power Cord into the power socket of the Ultroid® System Converter. • Ensure that the unit power switch is set to OFF prior to plugging the unit into a wall outlet. • Ensure that the plug...
More information