FRS-BRZ ALL PARTS 2016 (update 7.18.16)

(UPDATED 07.18.2016)
CUSCO USA EDITION
SUSPENSION COILOVER KIT
SUSPENSION PARTS
LSD ● CLUTCH
STRUT BAR ● CHASSIS BRACE
ENGINE PARTS
SPORT EQUIPMENT ● EXTERIOR PARTS
SPORT PERFORMANCE
MONOTUBE SHOCK ABSORBER “SPORT” SERIES
TYPE
DAMPER
REF. HEIGHT
PART NO
MONOTUBE SHOCK ABSORBER “COMPETITION” SERIES
MSRP
RECOMMENDED HEIGHT
FRONT/REAR
MAXIMUM HEIGHT
FRONT/REAR
24way
24x3way
Sport / Competition Series Coilover Features
Inverted shock layout
Custom spring rates available
Long lasting springs (200 kgf/mm² tensile strength)
MONOTUBE SHOCKS
WAY ADJUST
SPRING RATE (Front/Rear) *(OPTIONAL RATES)
$ 2,280
$ 2,480
$ 4,180
24way
Vehicle specific bracket (high durability)
Exceeds over 500 hours of elemental testing standards
Rebuild service available (fees apply)
Custom dampening rate & stroke length available on ZERO 3, ZERO 3X
Full height adjustable coilover structure
3 way dampening precise adjustment
Rebound- 24 way, Compression: Hi- 24way + Low 24 way
Mono-tube inverted shock layout
External reservoir for increased capacity
Front: pillowball camber adjustable
Rear: pillowball upper mount
Full height adjustable coilover structure
24 way adjustable needle valve shocks
Mono-tube inverted shock layout
MONOTUBE SHOCKS
MONOTUBE SHOCKS
WAY ADJUST
WAY ADJUST
Full height adjustable coilover structure
24 way adjustable needle valve shocks
Mono-tube inverted shock layout
Front: pillowball camber adjustable
Rear: pillowball upper moun
Front: pillowball camber adjustable
Rear: HD rubber upper mount
Street Series Adjustable Suspension Coilover Kit
FULL
HEIGHT
ADJUST
DAMPER
WAY
Adjustable for comfort at any driving stage
40 way adjustable needle valve shock absorber
Full height adjustable coilover structure
Equipped with top upper mounts
Front: pillowball camber adjustable
Rear: HD rubber upper mount
CPRV Valve (Corrective Pressure Regulating Valve)
Pressure dependent valve = comfort & stability
ECon2 Electronic Damper Control Unit compatible
Optional
Front and rear pillow upper mount version kit available
Designed with emphasis on superior quality
Designed exclusively per vehicle for stroke and stability
Twin-tube shock absorber construction
Custom spring rates available
Long lasting springs (200 kgf/mm² tensile strength)
Rubber seat and polymer washers for noise cancellation
Aluminum alloy spring seat & lock nut
Suited for and complies to larger wheel/tire setups
Rust & corrosion resistant (500+ hrs of elemental testing)
Vehicle specific bracket
Street-A & Street-ZERO rebuild available (fees apply)
100% Made in Japan
FULL
HEIGHT
ADJUST
DAMPER
Full height adjustable coilovers
for a wide range of setting
Fixed dampening shock absorber
Full height adjustable coilover structure
Equipped with top upper mounts
Front: pillowball camber adjustable
Rear: HD rubber upper mount
Optional
Front and rear pillow upper mount version kit avail
TYPE
UPPER MOUNT
DAMPER
Fr / Rr
Fixed
40way
40way
REFERENCE
HEIGHT
PART NO
MSRP
RECOMMENDED HEIGHT
FRONT/REAR
MAXIMUM HEIGHT
FRONT/REAR
WAY
40 levels of all around
adjustment for comfort and performance
40 way adjustable needle valve shock absorber
Standard coilover structure
Non upper mount version (reuse factory)
ECon2 Electronic Damper Control compatible
SPRING RATE (OPTIONAL RATES)
FRONT
$ 1,480
$ 1,280
$ 1,200
PAJ: Camber adjustable pillowball mount ARG: Fixed camber hard rubber upper mount
PRG: Camber fixed pillowball mount CP2 Option: $267
REAR
CP2 OPTION
UPPER MOUNT - FR/RR ECON2 NOTES
OEM FITMENT + 40 WAY DAMPER OEM replacement shock absorbers that retain factory height
Enhances comfort and improves the sport driving experience!
Features 40 way adjustable shock dampening
DIRECT OEM REPLACEMENT SHOCK ABSORBERS
40 level shock dampening adjust
Upright, Twin tube, OEM dimension shock strut
Factory upper mounts, OEM (big) spring reused (Also complies to OEM dimension lowering springs)
CPRV (Corrective Pressure Regulating Valve) featured
Retains comfort and stability especially when dampening is set at a soft level
Noiseless design (prevents “squishy” sounds commonly experienced with OEM)
e-con2 compatible (sold separately)
140% stiffer than factory OEM dampening rate (when set at max hard)
Springs not included
Reuse of OEM factory springs will not change vehicle height
1 year 10,000 mile limited warranty
DAMPER
RECOMMENDED FOR
Enthusiasts who want a bit more than factory suspension
Enabling specific damper setting for varying road conditions
Users who enjoy the factory vehicle height
PRODUCT
PART NO
WAY
MSRP
$ 746
$ 420
$ 360
$ 634
(Front + Rear)
(Front)
(Rear)
(Front + Rear)
SUSPENSION COILOVER KIT & OPTIONAL PARTS
Set the shocks from the driver seat
40 WAY ELECTRONIC DAMPER CONTROL e-Con2
Street-A Kit
Street ZERO-A Kit
Touring A Kit
$634 (MSRP)
Adjust 40way of front & rear shocks dampening
Switch between vertical & horizontal display
Record and save up to 4 shock setting profiles
7 different illumination colors to choose from
G Sensor feature $131 (Sold separately)
PILLOW BALL UPPER MOUNT
CAMBER ADJUST PILLOWBALL UPPER MOUNT
Corrects headlight beams for
lowered vehicles
AUTO HEADLIGHT LEVELIZER
PART NO:
$ 67 (MSRP)
40 Way Adjust
Step Motor
G Sensor
Direct factory replacement 100% bolt-on
Adjustable length via turnbuckle
Short type (73~90mm)
Adjustment parameter is dependent on rod
FIXED PILLOWBALL UPPER MOUNT
PILLOWNUT
Negative
ADJUSTMENT
CAP BOLTS (hex)
Positive
Adjustment
Cap Bolts (hex)
Caution
The gauge scribed on the camber plate
is for reference use only and each increment
does not signify a degree of camber change.
DURALUMIN PLATE
(T=6mm)
Enables camber adjustment on suspension coilovers. Correct
wheel alignment irregularities or setup the suspension to your
specific race setting.
Quick steering feedback and rigid feel
6mm thick Duralumin 2017S plates (8mm on some vehicles)
Pillow nut & collar caters to various suspension systems
FRONT : 965 410 A (Camber Adjustable)
REAR : 965 421 A60 * FOR ID60 SPRING
PILLOW COLLAR
$320 (MSRP)
965 421 A65 * FOR ID65 SPRING
SUSPENSION COMPONENTS
WIDE TREAD LOWER FRONT ARM
PILLOWBALL
BODY
Can be mounted directly on top of spring via inner sheet
Quick steering feedback and rigid feel
10mm thick Duralumin 2017S plates
Pillow nut & collar caters to various suspension systems
Special rally Gravel Spec avail with larger pillowball
(MBWT18 & MBTW22)
965 421 A70
* FOR ID70 SPRING
ENHANCES SPORT DRIVING FEATURES!
＊High Strengthen steel pipe can handle maximum impact from racing compound tires.
＊Possible 3 step negative camber settings. 0mm, + 5mm, + 10 mm, [ + 15 mm : not with stock tie rod end]
＊Hard rubber bushing eliminates alignment changes and provide precise steering response.
＊Direct replacement for OEM lower arm Bolt on installation : 1.0 hr. ※does NOT include alignment time
＊Additional negative camber can result better tire contact patches and cornering speed.
＊Extending lower arm length provide wider treads resulting higher front turning capacity.
＊Unlike wheel offsetting, wider tread behavior can be achieved without effecting kingpin offsets or scrub radius.
＊CUSCO adjustable pillow upper mount can be used for greater adjustments.
965 462 A - $800 MSRP
Not Applicable at ＋15mm position when using OEM tie rod end.
Make sure there is more than 20 mm for screws to contact at tie rod ends.
[ Camber Data Example ]
* Results will vary
Ride height : - 15mm from stock height
Shock top location : Same as stock
Set Toe : 0 mm
LENGTH
CAMBER DEG.
<1>
0 mm
= - 0.6 degree
<2>
+ 5 mm
= - 1.0 degree
<3>
+ 10 mm
= - 1.5 degree
<4>
+ 15 mm
= - 2.0 degree
REAR STABILIZER
Bushing Sleeve
REAR MEMBER COLLAR
REAR DIFF MOUNT COLLAR : REAR SIDE
- Eliminates rubber bushings flex by
inserting aluminum spacer between
chassis & rear sub-frame.
- Maintain proper alignment set up,
improve traction.
- Bolt-on parts requires no rear
member removal and change of rubber
bushings.
Part number : 965 928 B : $160.00 (MSRP)
To combat the unnecessary movement of the rear differential case while the
driveline is loaded, Cusco offers a set of bushing collars to help keep the rubber
bushings from deforming. The resulting effect is that the driveline will transmit
power with more precision and immediacy, as well as keeping the entire
driveline stable for more direct feel at the throttle as well as shift lever. The kit
retains the bushing configuration and is not completely solid to still provide the
protection for the gears as well. It’s part of many small features that all add up
to the precision required in motorsports.
REAR LATERAL LINK (Frontside) Pillowball Type
Part No: 692 474 LA
$600 (MSRP)
Enables suspension toe adjustment
±12mm of adjustment (via turnbuckle)
REAR DIFFERENTIAL COLLAR
REAR
965 927 A : $334 (MSRP)
Part No: 965 928 A $160 (MSRP)
Solidifies the frontside mounts of the rear
differential carrier.
REAR LATERAL LINK (Rearside) Pillowball Type
Part No: 692 474 L
$574 (MSRP)
Enables suspension camber adjustment
±12mm of adjustment (via turnbuckle)
Requires vehicle structural change registration (documentation included)
FRONT
2 : LOWER ARM - REAR
9 : UPPER ARM REAR - BODY SIDE
5 : LATERAL LINK REAR - BODY SIDE
8 : UPPER ARM FRONT - BODY SIDE
Requires vehicle structural change registration (documentation included)
REAR TRAILING ROD
Part No: 965 474 T
$467 (MSRP)
Minimizes wheel hop during accel & decel
Prevents rear wheel misalignment
Enables suspension caster adjustment
±12mm of adjustment (via turnbuckle)
3 : SWAYBAR LINK - ARM SIDE
6 : LATERAL LINK FRONT - BODY SIDE
FRONT LOWER ARM BUSHING
1 : LOWER ARM - FRONT
STABILIZER
(Front • Rear)
Maintain great comfort while suppressing
body roll during cornering
Front: Ø20 / Ø16
Rear: Ø16 / Ø14
(Factory: Front solid Ø18 / Rear solid Ø14)
*Stiff & Soft versions available
- Developed from numerous circuit driving on high performance tires, CUSCO choose the best
balanced rubber material for the reinforced bushings. Resulting sharper and liner handling with
direct steering inputs, the bushings improve cornering speed and eliminate suspension geometry
changes.
965 914 A - R & L set - $134 (MSRP)
Front solid Ø20 Part No: 965 311 A20
Front solid Ø16 Part No: 965 311 A16
$294 (MSRP)
Rear hollow Ø16 Part No: 965 311 B16
Rear hollow Ø14 Part No: 965 311 B14
$267 (MSRP)
Front
SHIFT MOUNT COLLAR
Part No: 965 912 A $67 (MSRP)
Significant rigidity increase in transmission operation
Encourages crisp shifts during hard engagement
STEERING RACK BUSHING
1 : LOWER ARM - FRONT
965 464 AV
$560 (MSRP)
2 : LOWER ARM - REAR
692 464 BV
$240 (MSRP)
3 : SWAYBAR LINK - ARM SIDE
-
4 : TRAILING ARM - FRONT
692 464 NV
$240 (MSRP)
5 : LATERAL LINK REAR - BODY SIDE
692 464 HV
$240 (MSRP)
692 464 JV
$240 (MSRP)
7 : TRAILING ARM - REAR
692 464 NV
$240 (MSRP)
8 : UPPER ARM FRONT - BODY SIDE
965 464 LV
$240 (MSRP)
9 : UPPER ARM REAR - BODY SIDE
965 464 IV
$240 (MSRP)
STEERING RACK BUSHING SST
Part No: 965 935 SST $40 (MSRP)
Special Service Tool (SST) used to pull out
the bushing from the steering rack.
SHIFT LEVER RETAINER BUSHING
Part No: 965 936 A $40 (MSRP)
Replace from OE rubber bushing. Prevent mis-shift and
the best working combination with Shift Mount Collar :
965 912 A
HYBRID STRUT BAR WITH BCS
Special hybrid bushing included with shaft
Absorbs sound and vibration to enhance comfort
HYBRID SHAFT
Various suspension bushings designed to maintain that
specific alignment setting during hard cornering.
Part No: 965 488A $200 (MSRP)
Prevents unnecessary rear differential carrier
movement for increased traction.
Front Part No: 965 542 AM
$307 (MSRP)
SPECIAL HYBRID BUSHING
PILLOW BUSHING
Rear
REAR DIFFERENTIAL BAR
Part No: 965 935 A $120 (MSRP)
Replacing the factory bushings with these urethane units
results in increased steering and handling shapness.
Urethane material
SST required (sold separately)
7 : TRAILING ARM - REAR
4 : TRAILING ARM - FRONT
QUICK RELEASE LEVER
(2 pcs PER SET)
Enables quick removal of the strut bar center
shaft without any hand tools.
Replace strut bar nut & bolt set for OS, ALC, &
HBD type
Part No: 00B 540 C $54 (MSRP)
ENGINE MOUNT
Part No: 965 911 A $267 (MSRP)
HD Rubber designed to increase shift
and throttle feel. Enhances traction
and steering response.
ALC CARBON STRUT BAR WITH BCS
Aluminum & carbon fiber fused together to make
a lightweight shaft
Front Part No: 965 535 AMLHD $307 (MSRP)
ALC CARBON STRUT BAR
REAR Part No: 965 536 A $240 (MSRP)
STRUT BAR • OVAL SHAFT
TYPE-OS
Lightweight aluminum oval shaft, strong & durable
Front Part No: 965 540 A $200 (MSRP)
Rear Part No: 965 541 A $200 (MSRP)
STRUT BAR • BCS
Brake Cylinder Stopper included on bracket mount
Front Part No: 965 540 AMLHD $267 (MSRP)
CHASSIS BRACE FIGHT CHASSIS FLEX AND REVIVE OPTIMAL SUSPENSION MOVEMENT!
POWERBRACE
Strengthens chassis and minimizes body flex at cornering
loads enabling optimal suspension movement.
Similar effect as stitch welding a fatigued seasoned chassis.
100% bolt-on, no drilling or welding
STKM material oval shaft (t=1.6mm)
Designed with plenty of ground clearance
PRODUCT NAME
PART NO
POWERBRACE Engine Room (non-adjustable)
POWERBRACE Engine Room (adjustable)
POWERBRACE Front Lower Arm
POWERBRACE Front Member
POWERBRACE Rear Member Side
POWERBRACE Rear Member
POWERBRACE Rear End
Rear End brace requires removal of rear bumper
POWERBRACE : SEAT RAIL PLUS
- It made cabine left right directional
rigidly improvement, at same time, it
contribute to improve chassis rigidly.
- Equipped anchors may be used for
Lap belt mounts.
MSRP
$171 (MSRP)
$454 (MSRP)
$134 (MSRP)
$227 (MSRP)
$200 (MSRP)
$114 (MSRP)
$134 (MSRP)
& can not be installed concurrently
REAR PILLAR SIDE GARNISH COVER FOR
POWER BRACE REAR PILLAR
965 492 RPS - $67 MSRP (R & L Pair)
Part number : 965 492 SP
(MSRP) : $227.00
POWERBRACE : REAR PILLAR
ALC STRUT BAR (rear)
Requires trunk lining modifications
- It made cabin left right directional rigidly improvement, at same time, it contribute to improve
chassis rigidly.
- Connect between right and left C-Pillar.
- 22mm OD aluminum shaft with high rigidly steel bracket.
Part number : 965 492 RP
- Video device can be mounted. * Not for harness
- Bolt on installation. * Need modification on C-pillar cover.
(MSRP) : $160.00
Let us take care of the hardest section to install
our Rear Pillar Power Brace.
Pre-made hole on OE Garnish Cover which will fit
perfectly. It is always good to keep one for spare.
* Sold as pair
REAR STRUT BAR
STRUT BAR ● OVAL SHAFT (rear)
Requires trunk lining modifications
Front Lower Arm PLUS
- Benefits chassis rigidty & minimize
alignment change.
- Works with OEM under cover (No
trimming required.)
- Does not work with Front Lower Arm
Brace : 965 492 FL
Part No : 965 492 FP $194 (MSRP)
ROLLCAGE
Rear Lateral Sway Bar Bracket
- Rigid brackets maximize a sway bar effect.
- Best upgrade with CUSCO sway bar. Part No : 965 492 RL $174 (MSRP)
FRONT STRUT BAR
FRONT SWAY BAR
REAR SWAY BAR
LSD & GEARS
RS Springs enable low initial
torque engagement
INITIAL TORQUE
DIRECTION
LSD ACTIVATION
DIRECTION
RS SPRING
1 WAY CAM
2 WAY CAM
LSD
ACTIVATION
1&2 Way Type
LOW INITIAL TQ, RESPONSIVE, & LONG LIFE
Minimizes drivetrain power loss, great for underpowered vehicles
Less chattering noise than conventional LSD systems
Activated by RS coil springs which are designed not to lose its
pressure consistency for a stable and extended performance use.
A more direct feeling due to activatiion and pressure direction
being on the same axis for improved throttle control.
FLAT FRICTION DISK (FFD)
Features a special flat friction clutch plates which translates to a milder initial
engagement when acceleration is ON or OFF. Perfect for rear wheel drive setups in
circuit situations, as well as minimizing powerloss for low horsepowered vehicles.
The key is the newly designed FFD (flat friction disk) combined with outer tabbed
MZ plates enables a smooth and mild effectiveness when most needed.
Type-RS Spec-F Part No:
Type-MZ Spec-F Part No:
Type-RS Standard Part No:
Type-MZ Standard Part No:
LSD 986 LT## $1,520 (MSRP)
LSD 986 KT## $1,507 (MSRP)
LSD 986 ## $1,520 (MSRP)
LSD 986 ## $1,507 (MSRP)
## marks indicates various settings per part number. 1&2 way, 1.5&2 way combinations avail.
Cone springs enable
initial torque engagement
CONE SPRING
2 WAY CAM
1 WAY CAM
1&2 Way Type
LSD
ACTIVATION
FINAL GEAR
Part No: 965 029 A45
$934 (MSRP)
4.556 ratio ring and pinion final gear set
Will not fit Super Low Final LSD
SUPER LOW FINAL LSD
Part No: LSD 987 ##
$1,867 (MSRP)
LSD designed exclusively to fit Toyota
OEM 4.875 & 5.125 ratio ring & pinion
HIGH INITIAL TQ, LINEAR ENGAGEMENT
INCREASED CAPACITY DIFF COVER
The Type MZ is designed where the activation pressure opposes
the direction of the initial torque with the utilization of cone springs.
Available for various driveline setups that require higher initial
torque setting for activation.
Suited for high horsepowered vehicles that requires maximum
traction.
Part No: 965 008 AL (blue) 965 008 AS (silver)
$907 (MSRP)
Volume increased by 500cc
Built in heat sink fins promote efficient cooling
REAR DIFFERENTIAL PINION DISTANCE COLLAR
Part No: 965 029 DC
$94 (MSRP)
Pinion Spacer
Location
CLUTCH & TRANSMISSION
Designed to withstand the abuse of constant accel and
decel, solidifies rear differential against breakage.
Recommended when rebuilding rear end assy.
Requires OEM Nissan R200 shims. (sold separately)
LAY THE TRACTION & MINIMIZE DRIVELINE POWER LOSS!
WEIGHT: 4.8kg (OEM 9.34kg)
METAL DISK
COPPER SINGLE DISK
METAL CLUTCH SET
COPPER SINGLE SET
Part No: 00C 022 C666F
$428 (MSRP)
Heat resistant & long endurance
Strengthened metal disk
Metal Disk + Clutch Cover
Part No: 965 022 G
$852 (MSRP)
OEM Flywheel Compliant
Part No: 00C 022 R666
$386 (MSRP)
Sport performance with
factory reliability
Copper Disk + Clutch Cover
Part No: 965 022 F
$787 (MSRP)
CLUTCH COVER
Part No: 00C 022 B965
$511 (MSRP)
Strengthened pressure plate
Smooth gear shift engagement
Push-type
Note: Use with Cusco clutch
disks only.
CHROMOLY FLYWHEEL
Part No: 965 023 A
$734 (MSRP)
Designed and machined precisely
for even rotation, delivering a balanced
drive train even at low revolutions.
Countershaft, 1st & 2nd Gear
CLOSE RATIO GEAR SET
Part No: 965 028 A
$2,640 (MSRP)
Brings 1st and 2nd gear ratio closer to the 3rd
gear for competition and sport driving performance.
1ST: 3.626 (Factory)
2.946 (Cusco)
2ND: 2.189 (Factory)
2.011 (Cusco)
Please use Metal & Copper Disk with Cusco Clutch Cover
STAINLESS MESH CLUTCH LINE
Part number : 965 022 CL
MSRP : $120.00
Using aircraft-grade PTFE stainless, Teflon-inner lined hose, we've achieved a
design that not only provide performance but also longevity. Compared to
standard OEM rubber hose, stainless reinforcement resists expansion over high
range of temperatures, as well as to keep contamination at minimum. Due to this
characteristics, fluid-dynamic forces are translated with much higher precision,
from pedal to clutch mechanism. Recommended for anyone who is serious about
vehicle control, in any motorsport stage.
FORK & BALL SET :
Part number : 965 024 S
MSRP : $334.00
RELEASE FORK :
Part number : 965 024 F
MSRP : $200.00
* Release Fork Application :
Toyota FR-S - 6 SP M/T
Subaru BRZ - 6 SP M/T
PIVOT BALL :
Part number : 965 024 P
MSRP : $200.00
* Pivot Ball Application :
Toyota FR-S - 6 SP M/T
Subaru BRZ - 6 SP M/T
Subaru Impreza WRX
: GDA (05~06) & GH (07~09)
* Push type Clutch 5 SP M/T
To address the limitations of stock
fork rigidity when using motorsports
grade clutch systems, we’ve
designed a fully gusseted fork and
Chromoly enhanced pivot ball.
Fitments are the same standard
type part replacement, so there are
no special preparations or
modifications needed for
installation. The clutch pedal feel
will become more positive, stable,
with additional durability needed for
aftermarket heavier-sprung clutch
systems common today.
ENGINE PARTS INCREASE POWER, TORQUE, AND RESPONSE!
Sound Creator
Cusco High Press. Radiator Cap
Reservoir Tank
Brackets
Hose
Tank Band
Dummy Cap
Hose Band
High Pressure
Radiator Cap
COOLANT RESERVOIR TANK
Part No: 965 051 A
$360 (MSRP)
Sound Creator Compatible
Dummy Cap
Reservoir Tank
Polished aluminum tank promotes a smoother
water flow preventing cavitation, reducing
negative thermodynamic effects for the benefit
of performance.
The layout makes bleeding the system
an ease.
Polished aluminum tank
Cusco Radiator Cap included (1.3kPa)
Heater Hose (out)
Heater Hose (in)
Concurrent fitment with Cusco products
Strut Tower Bar, Powerbrace, Oil Cooler
OEM Reservoir Tank
Left: OEM Right: Cusco Suction Pipe
INCREASE AIR INTAKE EFFICIENCY & RESPONSE
AIR SUCTION PIPE KIT
Part No: 965 033 A $200 (MSRP)
By providing a smoother internal intake wall lining than
the OEM Toyotafactory ribbed design, a significant increase
in air intake velocity can be realized.
Factory rubber intake tubes are prone to cracks and leaks
Long lasting, heat resistant silicone fiber hoses
Silicone fiber hoses absorbs engine movement & vibration
Sound creator function can be used w/adapter
High quality polished aluminum finish (includes Cusco logo)
Union
Banjo
Oil Cooler Unit
Aluminum Washer
Upper & Lower Hose
Junction Block
WATER TO OIL ENGINE COOLER
Mounting Block
Hose Band
Hose Clamp
Tie Wrap
Corrogated Tube
Installed Photo
COMPLIES TO MT & AT TRANSMISSION
Part No: 965 012 AN $774 (MSRP)
Efficiently cools down oil temps when 130ºC (266ºF) is reached or exceeded.
Heat exchange design features a 7 row core (4000KCal) for increased oil capacity.
Enables a stable oil temperature range to protect the engine
Billet cut aluminum junction
Water temp sensor ports (PT 1/8 size)
Separate attachment available for
oil temp / oil pressure sensors
PRESSURE RELIEF VALVE
Part No: 965 729 A $758 (MSRP)
Prevents blowby gas from re-entering the crankcase
resulting in less load on the crankshaft to increase torque
and response.
RADIATOR CAP BRACKET
- Billet Aluminum with Blue Alumite finish
Part number : 965 730 D
(MSRP) : $131.00
A/C BELT COVER
- Billet Aluminum with Blue Alumite finish
Part number : 965 730 B (MSRP) : $267.00
ALTERNATOR BELT COVER
- Billet Aluminum with Blue Alumite finish
Part number : 965 730 C (MSRP) : $160.00
LEVEL GAGE STOPPER
- Billet Aluminum with Blue Alumite finish
NEODYMIUM MAGNET
DRAIN BOLT
Part number : 965 730 E
(MSRP) : $160.00
CUSCO VSC Canceler Module
This unit defeats the VSC at initial state of vehicle power up,
eliminating the need for the driver to switch the system off, each
time. For cars that need the system off for most of the use, such
as on a dedicated competition vehicle.V
Activation not limited by coolant temperature
Cancel VSC & TRC with active ABS
Remain active after restart
One push operation
OBD2 plug in
Part number : 00B 001 ND03
MSRP : $24.00
M16 X P 1.5
965 736 A
- $534 (MSRP)
Using a powerful 4500 Gauss Neodymium magnet, Cusco Aluminum Drain Bolt will capture metallic
pollutants and microscopic particles that reside in motor oils, even those which may not be captured by oil
filters. The A7075 Duralumin alloy drain plug body material is a standard in the aerospace industry,being
one of the lightest and most durable, and comes integrated with an aluminum gasket ring as well.
ALUMINUM PULLEY SET
Crank pulley
CUSCO Electrical Water Pump (CEWP)
Water Pump pulley
Alternator pulley
965 731 NA - $1467 (MSRP)
Natural Aspirated engine
965 731 SC - $1467 (MSRP)
Cusco S/C engine
CUSCO Blue Light Weight Aluminum
Weight reduction resulting less stress on an
engine and better acceleration
Crank pulley : 790 g (1.74 lbs)
vs 2.3kg (5.07 lbs) Stock pulley
Water Pump pulley : 245 g (0.54 lbs)
vs 500 g (1.11 lbs) Stock pulley
Alternator pulley : 76 g (0.16 lbs)
vs 300 g (0.66 lbs) Stock pulley
Installation time about 2 hours
CEWP replace OEM mechanical water pump
3 to 6 PS gain recorded at higher RPM
CEWP works even an engine is not running
Constant water flow results lower water temperature by 5 degree Celsius on a circuit
Optional CEWP controller allow to set precise temperature : $480 (MSRP)
Fully bolt on with belt, works with OEM thermostat
Available for natural aspirated engine and CUSCO supercharger equipped vehicles
Off road use only
CEWP will NOT be installed on vehicles with non OEM exhaust manifolds
CUSCO Electrical Water Pump is equipped with air bleeder bypass attached to mount block for standard air
bleeding procedure
965 733 A - 3 pcs set - $560 (MSRP)
* Super Charger model with same pulley set
DIRECT IGNITION COIL
Part No: 965 728 A $1,134 (MSRP)
Newly designed internal ignition coil design which
produces increased spark maintained to the high
RPM range. * Not for 2015 and newer model.
COMPETITION SPEC MOTOR OIL
FOR MOTORSPORTS USE
STREET & CIRCUIT SPEC
MOTOR OIL FOR EVERYDAY USE
86 BRZ EXCLUSIVE
RACING ENGINE OIL
86 BRZ EXCLUSIVE
STREET ENGINE OIL
BIG BORE THROTTLE BODY
Part No: 965 725 A $1,707 (MSRP)
+2mm overbored throttle results in great
throttle response and increased torque
5W-30 API : SM
100% Synthetic Blend
5W-30 API : SM
100% Synthetic Blend
5 Liters
Part No: 965 005 R05
$240 (MSRP)
5 Liters
Part No: 965 005 S05
$134 (MSRP)
1 Liter
Part No: 965 005 R01
$51 (MSRP)
1 Liter
Part No: 965 005 S01
$30 (MSRP)
STREET OIL CATCH TANK
OIL CATCH TANK SEPARATOR TYPE EARTH HARNESS GROUNDING KIT IGNITION CAPACITOR + HARNESS
Part No: 965 009 A $131 (MSRP)
Oil catch can traps the harmful gasoline/oil
from re-entering the combustion chamber,
resulting in a cleaner and more efficient burn.
Tank Volume: 0.6L
Part No: 965 010 A $240 (MSRP)
When routed inline with the crankcase
PCV system, this oil catch can traps the
harmful gasoline/oil mixture from
reentering the engine.
Tank Volume: 0.45L
BATTERY STAY
Type-A Part No: 00B 745 A $78 (MSRP) 86/BRZ (RA Grade)
Type-B Part No: 00B 745 B $78 (MSRP) 86/BRZ (USDM / Non-RA Grade)
Add some Cusco blue to your engine bay by installing one of these battery
tie downs! Three sizes are availble for various vehicle applications.
REVERSE LOCK LEVER
- Billet Aluminum with Blue Alumite finish
Part No: 965 727 ALHD $200 (MSRP)
Full electrical power distribution throughout
system. Maximizes electric efficiency,
increases response.
Full cranking amps
Brighter headlights
Increased engine response
HIGH PRESS. RADIATOR CAP
Part No: 00B 050 B13
$34 (MSRP)
Cusco Radiator caps protects against
overheating and promotes efficient
coolant flow. Rated at (1.3kg/cm2).
Ignition Capacitor
Part No: 965 726 A $214 (MSRP)
Improves engine response from low to high RPM range by supplying the
ignition coil with stablized power. Maximizes efficiency and voltage
resulting in an increased torque feel as well as full power to all
electrically powered components.
SPORTS OIL FILTER
EXHAUST HANGER
Part No: 00B 001 E
$34 (MSRP)
Features a high powered magnet and
ultra fine paper + mesh filter, effective
for virtually any condition.
PUSH STARTER RING
Part number : 965 730 F
(MSRP) : $64.00
- Billet Aluminum with Blue Alumite finish
Part No: A160 RM002B
$12 / PC (MSRP) 5 per vehicle
Maximum durability to support factory
and OEM exhaust systems for vehicles
in motorsports or spirited driving.
Part number : 965 730 G
(MSRP) : $24.00
Carbon Fiber
Locks into 90 and 180 degrees
Installed on Toyota 86
FOLDING TOW HOOK (front & rear)
Front 86
Part No: 965 017 F $131 (MSRP)
Rear 86 & BRZ
Part No: 693 017 R $131 (MSRP)
Front BRZ
Part No: 687 017 F $131 (MSRP)
Color: Red
100% Bolt-On
Hardened Steel
Vehicle Specific Harness
Part No: 965 726 H $440 (MSRP)
SPORTS ACCEL PEDAL
Part No: 965 766 A $51 (MSRP)
High quality stainless steel
Wider pedals enable heel & toe
100% Bolt-on
Scribed Cusco logo
SPORTS SHIFT KNOB
Part No: 965 760 BA $51 (MSRP)
6MT shift pattern sticker
44 diameter
Duracon material
Color: black
D-Shape
CUSCO RACING METER
WATER & OIL
CUSCO SPORTS STEERING
Part No: 00B 700 T
$250 (MSRP)
Retains Factory Airbag
Gungrip Design
Embossed Material
Red Stitching
350mm D-Shaped
Suede Surface
Black Carbon Fiber
Leather Surface
OIL & FUEL
Part No: 00B 700 P
$300 (MSRP)
Red Stitching
Red Stitching
AIR PRESSURE
Turbo & Supercharger
Part No: 00B 700 B
$250 (MSRP)
Red Stitching
CARBON FIBER
SUEDE
LEATHER
Part No: 965 763 AC
$787 (MSRP)
Part No: 965 763 AS
$654 (MSRP)
Part No: 965 763 A
$654 (MSRP)
COLLABORATION SEAT
FULLY RECLINABLE + FULL BUCKET SEAT
STEPPED RECLINING MECHANISM
DEVELOPED EXCLUSIVELY FOR MOTORSPORTS
THE STANDARD FULL BUCKET SEAT MODEL
MSRP $1,650 ~ (USD)
Available Models
Fully Reclinable
Active Control Model
Steel Frame Structure
Luxury Suede Fabric
Fireproof Material
Safety Compliant (Japan)
Low Cushion
Stitchless Seat
Backrest
Color
: Black (base)
: Black (center)
Silver FRP Shell
Weighs 14.0kg/31lbs
MSRP $800 ~ (USD)
Full Bucket Seat
Racing Comfort Model
Fireproof Material
Safety Standard Compliant (Japan)
FIA Approved
(Excludes Carbon Aramid SPORT-C TypeL & TypeXL)
Color: Black (base)
Black/Bride Logo (center)
FRP Silver Shell
Super Aramid Black Shell
Carbon Aramid Shell
FRP Clear Black Shell (SPORT-C Only)
RO type Seat Rail : $210 (MSRP)
DEVELOPED FOR THE BEST DRIVING POSITION
MAXIMUM LOW HEIGHT + DEEPER POSTERIOR SEATING
FO type Seat Rail : $240 (MSRP)
XL type Seat Rail : $295 (MSRP) FG type Seat Rail : $240 (MSRP)
DESIGNED TO PLANT & HOLD THE DRIVER
APPLIES TO WIDE RANGE OF SPORTS AND CIRCUIT USE
Full Bucket Active Sports Model
Touring Comfort Model Fully Reclinable Seat
MSRP $990.00 (USD)
MSRP $800.00~$1,850.00 (USD)
Luxury Suede Fabric
Fireproof Material
Safety Standard Compliant (Japan)
Color
: Black (base)
: Gray Mesh (center)
Weighs 14.3kg/32lbs
Fireproof Material
Safety Standard Compliant (Japan)
FIA Approved (Excludes Carbon Aramid Model)
Color:
Black (base)
Black/Bride Logo (center)
FRP Silver Shell 7.1kg/15.5lbs
Super Aramid Black Shell 7.1kg/15.5lbs
Carbon Aramid Shell 6.6kg/14.5lbs
FRP Clear Black Shell (SPORT-C Only) 5.5kg/12.7lbs
MO type Seat Rail : $240 (MSRP)
COMFORTABLE ARM RESTS SUITED FOR LONG DRIVES
IDEAL FOR MINIVAN AND WAGON APPLICATIONS
FO type Seat Rail : $240 (MSRP)
FG type Seat Rail : $240 (MSRP)
Touring Comfort Model Fully Reclinable Seat
OPTIONAL ARM REST (L&R)
MSRP $1,040.00 (USD)
MSRP $50.00 (USD) [per side]
Luxury Suede Fabric
Fireproof Material
Safety Standard Compliant (Japan)
RACING HARNESS
Color
: Black (base)
: Gray Mesh (center)
Weighs 1.6kg/3.5lbs (each)
Luxury Suede Fabric
Fireproof Material
Safety Standard Compliant (Japan)
Color
: Black (base)
: Gray Mesh (center)
Weighs 14.5kg/32lbs
6-Point FHR/HANS Devices have 2-inch wide narrow design shoulder Belts.
Must use with FHR/HANS Devices as set. FIA approved.
6-Point 3-inch wide harness for professional to advanced drivers. FIA approved.
Billet Aluminum Light Weight and Compact Rotary Buckle
6 Point for HANS Devices
- 00B CRH 6HBL - Blue
- Price : $420.00
6 Point - 3 “ Width
- 00B CRH 6BL - Blue
- 00B CRH 6BK - Black
- Price : $420.00
4 Point - 3 “ Width
- 00B CRH 4BL - Blue
- 00B CRH 4BK - Black
- Price : $360.00
Anti-Submarine Belt - 2 “ Width
- 00B CCS 2BL - Blue
- 00B CCS 2BK - Black
- Price : $70.00
LIGHTWEIGHT ACRYLIC WINDOWS
FULL SET (7PCS) - 965 800 A : $1734 MSRP --------STOCK 14.47 kg vs. 7.38 kg
FULL SET SMOKE - 965 800 AS : $1814 MSRP------ STOCK 14.47 kg vs. 7.38 kg
A-PILLAR (1 SIDE) - 965 800 AT : $120 MSRP--------- STOCK 0.56 kg vs. 0.28 kg
DOOR (1 SIDE) - 965 800 AD : $334 MSRP ------------ STOCK 6.56 kg vs. 3.22 kg
QUARTER (1 SIDE) - 965 800 AQ : $180 MSRP ----------- STOCK 1 kg vs. 0.52 kg
REAR - 965 800 AR : $467 MSRP ------------------------ STOCK 6.35 kg vs. 3.36 kg
QUARTER SMOKE (1 SIDE) - 965800 AQS : $200 MSRP ------- STOCK 1 kg vs. 0.52 kg
REAR SMOKE - 965 800 ARS : $507 MSRP ------------ STOCK 6.35 kg vs. 3.36 kg
* SMOKE = 20% transmittance
REAR
ROLLCAGE
POINT
POINT
POINT
QUARTER
Regulation Capacity Roof
(5 passenger)
Product
Cusco D1 Chromoly Rollcage (Dash Escape)
Cusco D1 Chromoly Rollcage (Dash Through)
SAFETY
Y 21 Steel Rollcage (Dash Escape)
SAFETY
Y 21 Steel Rollcage (Dash Through)
SAFETY
Y 21 ASN Rollcage
SAFETY
Y 21 ASN Rollcage Harness Bar
SAFETY
Y 21 ASN Rollcage Front Strut Bar
SAFETY
Y 21 ASN Rollcage Rear Lower Side Bar
POINT
POINT
POINT
FRONT
ROLLCAGE
DOOR
Basic Rollcage Structural Variations
POINT
POINT
A-PILLAR
FRONT
2 PASSENGER TYPE
(Require to remove rear seat)
Part Number
965 261 C
965 261 D
965 261 E
965 261 F
965 261 G
965 265 E
965 265 F
965 265 G
965 270 C20
965 270 D20
965 270 E20
965 270 F20
965 270 G20
965 270 W9
965 270 W10
965 270 W11
965 270 W12
965 270 W13
965 290 E20
965 290 F20
965 290 G20
965 290 W9
965 290 W10
965 290 W11
965 290 W12
965 290 W13
965 290 W
965 290 HB
965 290 RA
965 290 RB
POINT
FRONT
FRONT
Dash Escape
(2 passenger)
MSRP
$600.00
$774.00
$960.00
$1,134.00
$1,334.00
$960.00
$1,134.00
$1,334.00
$534.00
$667.00
$867.00
$1,000.00
$1,134.00
$1,160.00
$1,294.00
$1,427.00
$1,560.00
$1,694.00
$867.00
$1,000.00
$1,134.00
$1,160.00
$1,294.00
$1,427.00
$1,560.00
$1,694.00
$2,774.00
$147.00
$294.00
$227.00
POINT
POINT
NOTES
4 pt, 4 passenger
5 pt, 4 passenger
6 pt, 4 passenger
7 pt, 2 passenger
8 pt, 2 passenger
6 pt, 4 passenger
7pt, 2 passenger
8 pt, 2 passenger
4 pt, 4 passenger
5 pt, 4 passenger
6 pt, 4 passenger
7 pt, 2 passenger
8 pt, 2 passenger
9 pt, 2 passenger
10 pt, 2 passenger
11 pt, 2 passenger
12 pt, 2 passenger
13 pt, 2 passenger
6 pt, 4 passenger
7 pt, 2 passenger
8 pt, 2 passenger
9 pt, 2 passenger
10 pt, 2 passenger
11 pt, 2 passenger
12 pt, 2 passenger
13 pt, 2 passenger
FIA Compliant / Weld-in
Use with 965 290 W Only
Use with 965 290 W Only
Use with 965 290 W Only
Dash Through
(2 passenger)