Everton Balustrade Guide

AS 1170.2:2002 – Structural design actions,
Part 0: Wind actions
AS 4055:2006 – Wind loads for housing
The choice is clear
The choice is clear
Compliance and
standards summary
If installed correctly Everton balustrade systems comply with
the strict requirements of the relevant Australian Standards.
Compliance certificates are issued on application –
[email protected]
To ensure that your fence meets the Australian
Standards, please make sure that you fence adheres
the following requirements:
To get the job done right you need to plan carefully. Everton’s
glass systems provide a wide selection of panel sizes to cater
for your site requirements. Use the tips detailed below to make
measuring up a simple process:
To create the most streamlined, designer look, try to use
as many equally sized panels as possible
Use a steel tape measure so that your measurements
are accurate
It is important to consider the footing that your channel
or posts will be enclosed within or attached to, please refer
to the installation requirements
Handling glass
Due to the weight and the nature of the glass panels we always
recommend a two-person lift when moving glass panels. When
moving and storing the glass it is crucial that the edges never
make contact with hard surfaces such as concrete and tiles.
Everton safety glass is toughened and unlike standard window
glass that breaks into sharp shards, the panel will shatter into
small blunt pieces if dropped or mishandled.
Glass Safety
We recommend the following safety gear for handling glass:
If installing the Semi-Frameless 600mm system in a
C2 region it is important to note that the maximum
panel width is 800mm
Everton gloves
Safety boots
Safety glasses
Appropriate clothing
AS 1664.1:1997 – Aluminium structures,
Part 1: Limit state design
AS 2208 – Safety Glass Manufacturing
Checklist
Materials
For a standard installation you will need:
Glass balustrade panels
Semi-frameless posts or channel
Handrail and accessories
Balustrade must be at least 1000mm in height
Glass cleaner and cloth
Balustrade must have an interlinking handrail
If using less than three panels of glass the handrail
must be fixed at the ends
For further information visit standards.com.au,
abcb.gov.au and your local council
The Everton range of glass balustrade systems are rated for
use in N1, N2, C1 and C2 wind regions. The maximum panel
width for the Semi Frameless System in a C2 region is 800mm.
Ensure you call your local council before installing your new
Everton balustrade to ensure it’s compliance with any local
by-laws, which vary from region to region.
When correctly installed, your Everton balustrade will meet
the requirements of the following Australian Standards:
NCC 2011 – Building Code of Australia 2011,
Class 1 and Class 10 Buildings
AS 1170.0:2002 – Structural design actions,
Part 0: General principles
AS 1170.1:2002 – Structural design actions,
Part 0: Permanent imposed and other actions
The choice is clear
AS 4100:1998 - Steel structures
Fencing becomes balustrade when it is 1000mm
or more from ground level
Any gaps must not permit a sphere of 125mm in
diameter to pass through
Measuring the site
AS 1228-2006 – Glass in buildings – Selection and installation
D.I.Y. Guide
Glass Balustrading
Suitable fixings for the application
Tools
Installing your Everton balustrade is even
easier when you have the right tools:
Steel tape measure
Chalk line
Hammer drill
Rubber or timber supports
Spirit level
Everton gloves
Safety boots
Safety glasses
Appropriate clothing
Online calculator
Our online calculator will help you
design and quote your balustrade
project, and then create a shopping
list to take into store.
Visit everton.com.au/calculator
*Conditions apply. Please see website for full details.
Need a hand? Call 1800 331 521 or email your queries to [email protected]
Caring for your balustrade
EV5594
Version 1, 1410
To keep your glass balustrade looking new for years to come, we highly
recommend using the range of EnduroShield™ protective coatings.
Online calculator
EnduroShield™ reduces cleaning time by up to 90%, and will also reduce
tea staining that may occur on stainless steel.
Our online calculator will help you design
galepacific.com
and quote your balustrade project, and then
™Everton is a trademark of Gale Pacific Ltd.
create a shopping list to take into store.
9 342322 005594
Gale Pacific Limited
145 Woodlands Drive, Braeside,
Victoria, 3195 Australia.
Toll Free: 1800 331 521
everton.com.au
Gale Pacific (NZ) Limited
Unit 9, First Floor, 39 Apollo Drive,
Rosedale, Auckland, 0632 New Zealand.
Toll Free: 0800 555 171
Visit everton.com.au/calculator
everton.com.au
Semi Frameless
600mm Post
System
Fully Frameless
Channel System
Components
If you’re building your deck or
balcony from scratch, you can’t go
past the fully frameless channel
system for a high-quality, designerlook entertaining area. This system is
installed beneath the surface so there
are no posts to block your view.
Completely hidden aluminium
channel fixing for a seamless look
Choosing your system
When it comes to selecting a glass balustrade, the choice is clear. Everton glass
balustrades can provide your outdoor area with a stylish and safe barrier that
ensures a fantastic view.
Easy to install with the help of a mate, our range consists of two stylish systems
both of which are engineered and designed to work in unison with your home
and the environment.
Each system is represented by an icon. You can easily locate all of your
components by looking for one of these icons on pack.
Creates a modern fully frameless
look for your balcony or deck area
Matching fully frameless channel
pool fencing system also available
12mm Glass Panels
Aluminium Channel
EV4504 - 1100 x 1200mm
EV4825 - 1100 x 1150mm
EV4832 - 1100 x 1100mm
EV4849 - 1100 x 1050mm
EV4856 - 1100 x 1000mm
EV4863 - 1100 x 950mm
EV4870 - 1100 x 900mm
EV4887 - 1100 x 850mm
EV4894 - 1100 x 800mm
EV4900 - 1100 x 750mm
EV4917 - 1100 x 700mm
EV4924 - 1100 x 650mm
EV4931 - 1100 x 600mm
EV4993 - Channel 3m length
Aluminium Handrail
EV4207 - Anodised Handrail 3m length
EV4245 - Handrail Join Strip
EV4252 - Handrail Corner Join
EV4238 - Handrail End Cap
Easy
install in
6 steps
Step 1
EV4221 - Installation Kit
EV4269 - Rubber Glazing Block 10pk
EV4214 - Glazing Silicone
Lanko 702 Grout – One 20kg bag
= approx. 2m of channel
Pre-drill and fix channel
from side and bottom
Semi Frameless
600mm Post System
While the fully frameless
channel system requires a little
more commitment to install, it is
the only fully frameless design
for balustrade in the Everton
range and therefore provides
the most panoramic views.
The semi frameless post system
is the easier of the two systems
to install, this contemporary
design incorporates stylish
stainless steel posts and allows
extensive views.
Each system can be installed in 6 easy steps
Matching semi-frameless 930mm
pool fencing system also available
12mm Glass Panels
Glass Clamps
EV4702 - 960 x 1100mm
EV4719 - 960 x 1050mm
EV4726 - 960 x 1000mm
EV4733 - 960 x 950mm
EV4740 - 960 x 900mm
EV4757 - 960 x 850mm
EV4764 - 960 x 800mm
EV4771 - 960 x 750mm
EV4788 - 960 x 700mm
EV4795 - 960 x 650mm
EV4801 - 960 x 600mm
EV4276 - Flat Surface
EV4283 - Round Surface
6 steps
Aluminium Handrail
Step 1
EV4207 - Anodised Handrail 3m length
EV4245 - Handrail Join Strip
EV4252 - Handrail Corner Join
EV4238 - Handrail End Cap
Accessories
600mm Surface Mounted Posts
Step 2
EV4955 - Join Post
EV4962 - End Post
EV4948 - Corner Post
Note: 50mm panel gaps recommended
for best appearance.
EV4221 - Installation Kit
EV4269 - Rubber Glazing Blocks 10pk
EV4214 - Glazing Silicone
Installation Requirements
Step 3
Note: Measurement from post centre
to post centre is panel width + 22mm
Centre and fix posts
Step 3
Installation Requirements
Surface
Fixings
Footing
Embedment
Edge Distance
Surface
Fixings
Footing
Embedment
Edge Distance
Concrete
Concrete will form fixing.
150mm concrete slab or
400 x 400 x 400mm footing.
N/A
125mm.
Concrete
4 x M8 TruBolt stainless steel.
130mm 32MPa slab or
400 x 400 x 400mm footing.
60mm minimum.
125mm to bolt
centre.
Timber
50mm baton screws every
300mm on sides and bottom.
Encased in 45mm timber on
sides and bottom.
45mm.
N/A
Timber
4 x M8 316 stainless steel bolts
with nut and 45 x 2.4mm washer.
100 (w) x 50mm (h) type JD1.
50mm minimum.
20mm to bolt or
bolt centre.
Mix and pour structural grout
Install cover plates and
slide in glass
Step 4
Step 4
Example Configuration
use
Ho ll
wa ng
ixi
f
No oint
p
H
No ouse
fix wa
ing ll
po
int
Leave for 48 hours then
remove brace
Step 5
t
os
dP
Gla Gla
ss ss C
to
Wa lamp
ll =
25
m
En
m
H
No ouse
fix wa
ing ll
po
int
Jo
in
in
Jo
Po
st
Jo
in
in
Jo
Po
st
Jo
in
Hand rail
10
50
m
Hand rail
m
50
m
6m
m
m
00
Install hand rail
m
12
Online calculator
Visit everton.com.au/calculator
12
m
12
00
m
m
m
m
00
12
Custom glass sizes and
colours are available
through special orders.
Step 5
m
m
m
22
10
Install hand rail
m
Step 6
m
112
2m
2m
112
m
Online calculator
112
m
2m
2m
m
112
Visit everton.com.au/calculator
Corner Post = 90˚
Finished fence
Silicone channel
2m
87
2m
Step 6
m
m
00
m
st
Po
112
12
m
Hand rail Join
use
Ho ll
wa ng
ixi
f
No oint
p
st
Po
st
Po
Hand rail
corner join
m
12
00
Po
st Hand rail
83
10
Hand rail
corner join
m
00
Mark line of fence
Step 2
Place glass in channel
and brace it level
Example Configuration
Fully Frameless
Channel System
600mm marine grade 316
stainless posts
Creates a modern semi-frameless
look for your balcony or deck area
Accessories
Easy
install in
Components
Giving your existing patio or balcony
a makeover? The 600mm stainless
steel balustrade system is a classy
option and is easy to install to any
reinforced structural surface.
Custom glass sizes and
colours are available
through special orders.
Finished fence